Pasar al contenido principal

ELECTRONICA EN PAPEL CON MATERIALES DE DE VAN DER WAALS PARA APLICACIONES EN MONITORIZACION DE SALUD

PID2020-115566RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Modulation of the Superconducting Phase Transition in Multilayer 2H-NbSe2 Induced by Uniform Biaxial Compressive Strain

  • Henríquez-Guerra, Eudomar
  • Almonte, Lisa
  • Li, Hao
  • Elvira, Daniel
  • Calvo, M. Reyes
  • Castellanos-Gomez, Andres
Strain is a powerful tool for tuning the properties of two-dimensional materials. Here, we investigated the effects of large, uniform biaxial compressive strain on the superconducting phase transition of multilayered 2H-NbSe2 flakes. We observed a consistent decrease in the critical temperature of NbSe2 flakes induced by the large thermal compression of a polymeric substrate (>1.2%) at cryogenic temperatures. For thin flakes (∼10 nm thick), a strong modulation of the critical temperature up to 1.5 K is observed, which monotonically decreases with increasing flake thickness. The effects of biaxial compressive strain remain significant even for relatively thick samples up to 80 nm thick, indicating efficient transfer of strain not only from the substrate to the flakes but also across several van der Waals layers. This work demonstrates that compressive strain induced from substrate thermal deformation can effectively tune phase transitions at low temperatures in 2D materials.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Large Biaxial Compressive Strain Tuning of Neutral and Charged Excitons in Single-Layer Transition Metal Dichalcogenides

  • Henríquez-Guerra, Eudomar
  • Li, Hao
  • Pasqués-Gramage, Pablo
  • Gosálbez-Martínez, Daniel
  • D’Agosta, Roberto
  • Castellanos-Gomez, Andres
  • Calvo, M. Reyes
  • Gosálbez-Martínez, Daniel|||/items/c8907d7c-643e-478e-a2b2-716d2d44f265
  • Pasqués-Gramage, Pablo|||/items/dc3f3ba2-2b1e-4cfa-9301-2f520e57bdd9
The absorption and emission of light in single-layer transition metal dichalcogenides are governed by the formation of excitonic quasiparticles. Strain provides a powerful technique to tune the optoelectronic properties of two-dimensional materials and thus to adjust their exciton energies. The effects of large compressive strain in the optical spectrum of two-dimensional (2D) semiconductors remain rather unexplored compared to those of tensile strain, mainly due to experimental constraints. Here, we induced large, uniform, biaxial compressive strain (∼1.2%) by cooling, down to 10 K, single-layer WS2, MoS2, WSe2, and MoSe2 deposited on polycarbonate substrates. We observed a significant strain-induced modulation of neutral exciton energies, with blue shifts up to 160 meV, larger than in any previous experiments. Our results indicate a remarkably efficient transfer of compressive strain, demonstrated by gauge factor values exceeding previous results and approaching theoretical expectations. At low temperatures, we investigated the effect of compressive strain on the resonances associated with the formation of charged excitons. In WS2, a notable reduction of gauge factors for charged compared to neutral excitons suggests an increase in their binding energy, which likely results from the effects of strain added to the influence of the polymeric substrate.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Scalable and low-cost fabrication of flexible WS2 photodetectors on polycarbonate

  • Quereda, Jorge
  • Kuriakose, Sruthi
  • Munuera, C.
  • Mompean, Federico J.
  • Al-Enizi, Abdullah M.
  • Nafady, Ayman
  • Diez, Enrique
  • Frisenda, Riccardo
  • Castellanos-Gómez, Andrés
We present a low-cost and easy-to-implement technique to fabricate large-area WS photodetector devices onto transparent and flexible polycarbonate substrates. The method relies on the deposition of large-area (in the cm scale) thin films (~30 nm thick) of WS by a recently introduced abrasion-induced method. Interdigitated electrical contacts are then deposited by thermal evaporation through a shadow mask. The photodetectors present well-balanced performances with an good trade-off between responsivity (up to 144 mA/W at a source-drain voltage of 10 V and illumination power of 1 μW) and response time (down to ~70 µs) and a detectivity value of 10 Jones. We found that the devices perform very reversibly upon several illumination and straining cycles and we found a moderate device-to-device variation., This work received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 755655, ERC-StG 2017 project 2D-TOPSENSE), the Ministry of Science and Innovation (Spain) through the project PID2020-115566RB-I00. A.C.-G., A.M.A.-E., and A.N. extend their sincere appreciation to the Distinguished Scientist Fellowship Program (DSFP) at King Saud University for funding of this work. R.F. acknowledges the support from the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO) through a Juan de la Cierva-formación fellowship 2017 FJCI-2017-32919. J.Q. and E.D. acknowledge financial support from the Agencia Estatal de Investigación of Spain (Grants PID2019-106820RB, RTI2018-097180-B-100, and PGC2018-097018-BI00) and the Junta de Castilla y León (Grants SA256P18 and SA121P20), including funding by ERDF/FEDER. J.Q. acknowledges financial support from Universidad Complutense de Madrid and European Commision (MSCA COFUND UNA4CAREER grant. Project number 4129252) and from MICINN (Spain) through the program Juan de la Cierva-Incorporación.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct Magnetic Evidence, Functionalization, and Low-Temperature Magneto-Electron Transport in Liquid-Phase Exfoliated FePS3

  • Martín-Pérez, Lucía
  • Medina Rivero, Samara
  • Vázquez Sulleiro, Manuel
  • Naranjo, Alicia
  • Gómez, I. Jénnifer
  • Ruíz-González, María Luisa
  • Castellanos-Gómez, Andrés
[EN] Magnetism and the existence of magnetic order in a material is determined by its dimensionality. In this regard, the recent emergence of magnetic layered van der Waals (vdW) materials provides a wide playground to explore the exotic magnetism arising in the two-dimensional (2D) limit. The magnetism of 2D flakes, especially antiferromagnetic ones, however, cannot be easily probed by conventional magnetometry techniques, being often replaced by indirect methods like Raman spectroscopy. Here, we make use of an alternative approach to provide direct magnetic evidence of few-layer vdW materials, including antiferromagnets. We take advantage of a surfactant-free, liquid-phase exfoliation (LPE) method to obtain thousands of few-layer FePS3 flakes that can be quenched in a solvent and measured in a conventional SQUID magnetometer. We show a direct magnetic evidence of the antiferromagnetic transition in FePS3 few-layer flakes, concomitant with a clear reduction of the Néel temperature with the flake thickness, in contrast with previous Raman reports. The quality of the LPE FePS3 flakes allows the study of electron transport down to cryogenic temperatures. The significant through-flake conductance is sensitive to the antiferromagnetic order transition. Besides, an additional rich spectra of electron transport excitations, including secondary magnetic transitions and potentially magnon-phonon hybrid states, appear at low temperatures. Finally, we show that the LPE is additionally a good starting point for the mass covalent functionalization of 2D magnetic materials with functional molecules. This technique is extensible to any vdW magnetic family., Funds from Ministerio de Ciencia e Innovación in Spain (RTI2018-096075-A-C22, RYC2019-028429-I). E.M.P. thanks the Spanish Ministerio de Ciencia e Innovación (PID2020-116661RB-I00) and Comunidad de Madrid (P2018/NMT-4367). M.G.H. and A.C.-G. acknowledge funds from European Union Horizon 2020 research and innovation program (Graphene Core3-Grant agreement no. 881603 Graphene-based disruptive technologies), EU FLAGACS ERA through the project To2Dox (JTC-2019-009), andComunidad de Madrid through the project CAIRO-CMproject (Y2020/NMT-6661). A.C.-G. also acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 755655, ERC-StG 2017 project 2D-TOPSENSE) and the Ministry of Science and Innovation (Spain) through the project PID2020-115566RB-I00. M.L.R.G. acknowledges support by the Spanish Ministry of Science and Innovation through Research Project PID 2020- 113753RB-100. The National Centre for Electron Microscopy (ELECMI National Singular Scientific Facility) is also acknowledge for provision of access to corrected aberration microscopy facilities. CzechNanoLab Research Infrastructure supported by MEYS CR (LM2018110) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-Cost Shadow Mask Fabrication for Nanoelectronics

  • Pucher, Thomas
  • Bastante, Pablo
  • Sánchez Viso, Estrella
  • Castellanos-Gómez, Andrés
We present two approaches for fabricating shadow masks for the evaporation of electrodes onto nanomaterials. In the first one, we combine the use of a commercial fiber laser engraving system with readily available aluminum foil. This method is suitable for fabricating shadow masks with line widths of 50 µm and minimum feature separation of 20 µm, and using it to create masks with complex patterns is very straightforward. In the second approach, we use a commercially available vinyl cutting machine to pattern a vinyl stencil mask, and we use a glass fiber to define the separation between the electrodes. With this approach, we achieve well-defined electrodes separated by 15 µm, but this technique is less versatile in creating complex masks as compared with the laser-based one. We demonstrate the potential of these techniques by fabricating field-effect transistor devices based on MoS2. Our approach is a cost-effective and easily accessible method for fabricating shadow masks with high resolution and accuracy, making it accessible to a wider range of laboratories., This research was funded by the European Research Council (ERC) through the project grant agreement n° 755655; the Ministry of Science and Innovation (Spain) through the projects PID2020-115566RB-I00 and TED2021-132267B-I00; the Horizon 2020 FLAG-ERA through the project To2Dox (JTC-2019-009); and Comunidad de Madrid through the project CAIRO-CM (Y2020/NMT-6661)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards efficient strain engineering of 2D materials: A four-points bending approach for compressive strain

  • Li, Hao
  • Carrascoso, Félix
  • Borrás, Ana
  • Moreno, Gloria P.
  • Aparicio, Francisco J.
  • Barranco, Ángel
  • Gómez, Andrés Castellanos
Strain engineering, as a powerful strategy to tune the optical and electrical properties of two-dimensional (2D) materials by deforming their crystal lattice, has attracted significant interest in recent years. 2D materials can sustain ultra-high strains, even up to 10%, due to the lack of dangling bonds on their surface, making them ideal brittle solids. This remarkable mechanical resilience, together with a strong strain-tunable band structure, endows 2D materials with a broad optical and electrical response upon strain. However, strain engineering based on 2D materials is restricted by their nanoscale and strain quantification troubles. In this study, we have modified a homebuilt three-points bending apparatus to transform it into a four-points bending apparatus that allows for the application of both compressive and tensile strains on 2D materials. This approach allows for the efficient and reproducible construction of a strain system and minimizes the buckling effect caused by the van der Waals interaction by adamantane encapsulation strategy. Our results demonstrate the feasibility of introducing compressive strain on 2D materials and the potential for tuning their optical and physical properties through this approach., This work was funded by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Nos. 755655, ERC-StG 2017 project 2D-TOPSENSE), the Ministry of Science and Innovation (Spain) through the project PID2020-115566RB-I00. We also acknowledge funding from the EU FLAG-ERA project To2Dox under the program PCI2019-111893-2. H. L. acknowledges the grant from China Scholarship Council (CSC) under No. 201907040070. Ana B. thanks the ERC Union’s Horizon 2020 program (No. 851929 StG 2019 project 3DScavengers). We also thank the Spanish Ministry of Science and Innovation AEI/10.13039/501100011033 (No. PID2019-110430GB-C21), the EU ERDF (FEDER Operational Program (2014–2020), A way of making Europe) and the Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (Nos. P18-RT-3480, EMERGIA and US-1381057)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Throughput Mechanical Exfoliation for Low-Cost Production of van der Waals Nanosheets

  • Sözen, Yiğit
  • Riquelme, Juan J.
  • Xie, Yong
  • Munuera, C.
  • Castellanos-Gómez, Andrés
A method is presented for scaling up the production of flakes of van der Waals materials via mechanical exfoliation. Using a roll-to-roll setup and an automatized, massive parallel exfoliation process, adhesive tapes with a high density of nanosheets of van der Waals materials are produced. The technique allows for obtaining a good trade-off between large lateral size and excellent area scalability, while also maintaining low cost. The potential of the method is demonstrated through the successful fabrication of field effect transistors and flexible photodetectors in large batches. This low-cost method to produce large area films out of mechanically exfoliated flakes is very general, and it can be applied to a variety of substrates and van der Waals materials and, moreover, it can be used to combine different van der Waals materials on top of each other. Therefore, it is believed that this production method opens an interesting avenue for fabrication of low-cost devices while maintaining a good scalability and performance. © 2023 The Authors. Small Methods published by Wiley-VCH GmbH., The authors thank Thomas Pucher for his help in some of the device fabrication steps. This work was funded by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement no. 755655, ERC-StG 2017 project 2D-TOPSENSE), the Ministry of Science and Innovation (Spain) through the projects TED2021-132267B-I00, PID2020-115566RB-I00 and PRE2021-098348. The authors also acknowledge funding from the ″FLAG-ERA program (JTC 2019) under the project To2Dox (PCI2019-111893-2), the Comunidad de Madrid through the CAIRO-CM project (Y2020/NMT-6661) and the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094., The data that support the findings of this study are available from the cor-responding author upon reasonable request, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Short-wave infrared photocurrent spectroscopy to probe narrow-gap 2D materials

  • Pucher, Thomas
  • Bastante, Pablo
  • Xie, Yong
  • Castellanos-Gómez, Andrés
The capability of characterizing low-bandgap two-dimensional (2D) materials is crucial for a wide range of applications from fundamental science to commercial implementation. Current techniques rely heavily on expensive characterization equipment and thus hinder focused research on low-bandgap materials, compared to their counterparts in the visible range of the electromagnetic spectrum. This work demonstrates a cost-efficient and easily rebuildable optical setup to probe low-bandgap 2D materials using photocurrent spectroscopy. The heart of the setup consists of a supercontinuum laser in combination with a diffraction grating to create a tunable light source working from 500 to 2000 nm, allowing to access bandgaps in the short-wave infrared (IR), far from what is possible using standard silicon detector technology. Apart from a complete technical guide to facilitate reproduction of the system, two popular narrow-gap materials (MoTe<inf>2</inf> and black phosphorus) have been studied to extract bandgaps and excitonic features of these materials. The results highlight the simple, yet powerful approach of utilizing photocurrent spectroscopy in the IR and thus expanding the analysis toolbox for narrow-gap 2D semiconductor research., We acknowledge funding from the EU FLAG-ERA project To2Dox (JTC-2019-009) and the Spanish Ministry of Science and Innovation (Grants PID2020-115566RB-I00, TED2021-132267B-I00, CEX2018-000805-M-19-2 and PDC2023-145920-I00). This work was supported by the Open Fund of State Key Laboratory of Infrared Physics (Grant No. SITP-NLIST-ZD-2024-01)., The data that support the findings of this study are openly available at the following URL/DOI: https://zenodo.org/communities/2dfoundry/records., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct Laser Ablation of 2D Material Films for Fabricating Multi-Functional Flexible and Transparent Devices

  • Sözen, Yiğit
  • Ryu, Yu K.
  • Martínez, Javier
  • Castellanos-Gómez, Andrés
A scalable method is presented for direct patterning of graphite and transition metal dichalcogenide (TMD) films on polycarbonate (PC) and other transparent substrates using fiber laser ablation. This process facilitates the fabrication of various functional devices, including strain gauges, supercapacitors, and photodetector arrays, without the need for photolithography or solvents, thereby simplifying device production and enhancing environmental sustainability. Utilizing roll-to-roll mechanical exfoliation, homogeneous nanosheet films are created and then patterned with a laser engraving system. Electrical and optical characterization confirms that the laser-processed films maintain their crystallinity, with no observable damage to the underlying substrate. The scalability of this approach is demonstrated by constructing a WSe<inf>2</inf>/graphite photodetector array on PC, which exhibits high sensitivity, low noise, and uniform photocurrent response across its active channels. As a proof-of-concept, this array is used as an image sensor to capture light patterns, showcasing its potential for flexible and semi-transparent imaging applications. These findings open up new avenues for incorporating all-van der Waals devices into wearable electronics, optoelectronics, and imaging technologies. © 2025 Elsevier B.V., All rights reserved., This work was funded by the Ministry of Science and Innovation(Spain) through the projects TED2021-132267B-I00, PID2020-115566RB-I00, PRE2021-098348, PID2023-151946OB-I00, and PDC2023-145920-I00.The authors also acknowledge funding from the European Research Coun-cil (ERC) through the ERC-PoC 2024, StEnSo project (grant agreement no.101185235), the FLAG-ERA program (JTC 2019) under the project To2Dox(PCI2019-111893-2), the Comunidad de Madrid through the CAIRO-CMproject (Y2020/NMT6661), and the CSIC program for the Spanish Recov-ery, Transformation and Resilience Plan funded by the Recovery and Re-silience Facility of the European Union, established by the Regulation (EU)2020/2094, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced strain transfer and optoelectronic performance in MoS2 devices via Formvar encapsulation

  • Vladimirov, Simeon N.
  • Cakiroglu, Onur
  • Munuera, C.
  • Castellanos-Gómez, Andrés
  • Vasconcelos, Thiago L.
4 figures, We systematically investigate the influence of polyvinyl formal (PVFM), commonly known as Formvar, in comparison to polycarbonate (PC) and polymethyl methacrylate (PMMA), as encapsulation materials on the strain performance of MoS2 monolayer and bilayer flakes on flexible polypropylene (PP) substrates. Notably, optical differential reflectance measurements reveal that PVFM and PMMA encapsulation significantly enhances the mechanical and thermal strain gauge factors by approximately 2-fold (up to ∼−50 meV/%) and 6-fold (up to ∼−1.5 meV/°C), respectively, while PC shows a slightly lower enhancement. Moreover, all three polymers increase the maximum achievable strain from approximately 1.4% to 2.3%. Furthermore, devices fabricated on PP substrates exhibit improved optoelectronic performance when encapsulated with PVFM, including increased and faster photocurrent response and extended device lifetime., The Ministry of Science and Innovation (Spain) through the projects PID2020-115566RB-I00, TED2021-132267B-I00, PDC2023-145920-I00 and PID2023-151946OB-I00. The authors also acknowledge funding from the Comunidad de Madrid through the CAIRO-CM Project (Y2020/NMT-6661), European Union’s Horizon 2020 research and innovation program under the Grant Agreement 956813 (2Exciting) and European Research Council (ERC) through the project ERC-PoC 2024 project StEnSo (grant agreement no. 101185235)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Air-stable, aluminium oxide encapsulated graphene phototransistors

  • Rojas Castiglione, T.
  • Pucher, Thomas
  • Dockx, K.
  • Aburto Contreras, G.
  • Sanz Biava, D.
  • Briceño Elchiver, B.
  • Buscema, M.
  • Castellanos-Gómez, Andrés
  • van der Zant, H.
  • Dulić, D.
Graphene has garnered significant interest in optoelectronics due to its unique properties, including broad wavelength absorption and high mobility. However, its weak stability in ambient conditions requires encapsulation for practical applications. In this study, we investigate graphene CVD-grown field-effect transistors fabricated on Si/SiO2 wafers, encapsulated with aluminum oxide ( Al2O3 ) of different thicknesses. We measure and analyze their optoelectronic response across wavelengths from near-ultraviolet to near-infrared. We find that, while having a negligible role in the photogating process, the Al 2 O 3 layer leads to stable and reproducible transferring curves operating in ambient conditions for over a month, with stable responsivities up to 1.5 A W − 1 at the shortest wavelength. Moreover, the transferring curves are stable at elevated temperatures up to 107°C . We also show that the sample performance can be tuned by changing the thickness of the SiO2 and Al 2 O 3 layer which brings further perspectives in developing robust sample technologies, especially in the ultraviolet region where the responsivity increases. Aluminum oxide encapsulated graphene-based photodetectors can thus be interesting for applications in air and at elevated temperatures. © 2024 The Author(s). Published by IOP Publishing Ltd., D D acknowledges financial support from ANID Fondecyt 1220984, Fondequip EQM140055, and EQM180009, and ANILLO ATE220057. D S is supported by ANID-Subdirección de Capital Humano/Magíster Nacional/2024-22241761 master’s scholarship. T P and A C G acknowledge funding from the EU FLAG-ERA Project To2Dox (JTC-2019-009) and the Spanish Ministry of Science and Innovation (Grants PID2020-115566RB-I00, TED2021-132267B-I00 and PDC2023-145920-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Toward Full Autonomous Laboratory Instrumentation Control with Large Language Models

  • Xie, Yong
  • He, Kexin
  • Castellanos-Gómez, Andrés
The control of complex laboratory instrumentation often requires significant programming expertise, creating a barrier for researchers lacking computational skills. This work explores the potential of large language models (LLMs), such as ChatGPT, to enable efficient programming and automation of scientific equipment. Through a case study involving the implementation of a setup that can be used as a single-pixel camera or a scanning photocurrent microscope, it is demonstrated how ChatGPT can facilitate the creation of custom scripts for instrumentation control, significantly reducing the technical barrier for experimental customization. Building on this capability, it is further illustrated how LLM-assisted tools can be used to develop autonomous agents capable of independently operating laboratory instruments. This approach underscores the transformative role of LLM-based tools in democratizing laboratory automation and accelerating scientific progress. © 2025 The Author(s). Small Structures published by Wiley-VCH GmbH., This work was supported by the Open Fund of State Key Laboratory of Infrared Physics (grant no. SITP-NLIST-ZD-2024-01). A.C.-G. acknowl-edges funding by the Ministry of Science and Innovation (Spain) through the projects TED2021-132267B-I00, PID2020-115566RB-I00, PDC2023-145920-I00, and PID2023-151946OB-I00 and the European Research Council through the ERC-2024-PoC StEnSo (grant agreement101185235) and the ERC-2024-SyG SKIN2DTRONICS (grant agreement101167218). The author (Y.X.) acknowledges Prof. Ju Li (MIT) andDr. Álvaro Blanco (ICMM-CSIC) for enlightening discussion., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optoelectronic synaptic characteristics of a van der Waals WS2/PdSe2 heterostructure

  • Viscardi, L.
  • Mazzotti, A.
  • Durante, O.
  • Pucher, Thomas
  • Martucciello, N.
  • Castellanos-Gómez, Andrés
  • Bartolomeo, A.D.
Two-dimensional van der Waals heterostructures provide a versatile platform for multifunctional optoelectronic devices. WS2/PdSe2 heterostructures, characterized by n-type conductive behavior, exhibit persistent photoconductivity in high vacuum under negative gate voltages. This phenomenon has been leveraged to simulate synaptic functions of the human brain, including short- and long-term plasticity. Short-term plasticity was simulated, resulting in paired-pulse facilitation and post-tetanic potentiation indices of approximately 140% and 300%, respectively. By stimulating the WS2/PdSe2 heterostructure with consecutive 1 s light pulses, the learning, forgetting, and re-learning phases associated with knowledge acquisition in the human brain were replicated. Furthermore, the device was demonstrated as an optoelectronic memory, programmable with light pulses and erasable via electrical pulses on the gate electrode. © 2025 The Author(s). Published by IOP Publishing Ltd., A.D.B. thanks the University of Salerno, Italy, for funding this project through Grant ORSA243813. A.C.G. acknowledges funding by the Ministry of Science and Innovation (Spain) through the projects TED2021-132267B-I00, PID2020-115566RB-I00, PDC2023-145920-I00 and PID2023-151946OB-I00), and the European Research Council through the ERC-2024-PoC StEnSo (grant agreement 101185235)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Natural Layered Phlogopite Dielectric for Ultrathin Two-Dimensional Optoelectronics

  • Pucher, Thomas
  • Hernandez-Ruiz, Julia
  • Tajuelo-Castilla, G.
  • Martín-Gago, José A.
  • Munuera, C.
  • Castellanos-Gómez, Andrés
The integration of high-dielectric-constant (high-κ) materials with two-dimensional (2D) semiconductors is promising to overcome performance limitations and reach their full theoretical potential. Here, we show that naturally occurring phlogopite mica, exfoliated into ultrathin flakes, can serve as a robust high-κ dielectric layer for transition metal dichalcogenide-based 2D electronics and optoelectronics. The wide band gap (∼4.8 eV), high dielectric constant (∼11), and large breakdown field (>10 MV cm–1) of phlogopite enable transistors with subthreshold swings down to 100 mV dec–1, minimal hysteresis (∼30–60 mV), and interface trap densities comparable to those of state-of-the-art oxide dielectrics. Moreover, phototransistors built upon monolayer molybdenum disulfide (MoS2) and phlogopite exhibit responsivities up to 3.3 × 104 AW–1 and detectivities close to 1010 Jones, surpassing devices based on conventional gate insulators. We further demonstrate the versatility of this natural dielectric by integrating phlogopite/MoS2 heterostructures into NMOS inverters, showcasing robust voltage gains and low-voltage operation. Our findings establish phlogopite as a promising, earth-abundant dielectric for next-generation 2D transistor technologies and high-performance photodetection., We acknowledge funding from the Spanish Ministry of Science and Innovation (Grants PID2020-115566RB-I00, TED2021-132267B-I00, PDC2023-145920-I00, PRE2022-105538, and PID2023-149077OB-C31) and the Comunidad de Madrid (Project TEC-2024/TEC-308)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Van der Waals WS2/PdSe2 heterostructure as a visible-light photodetector and pressure optoelectronic sensor

  • Viscardi, Loredana
  • Mazzotti, Adolfo
  • Durante, Ofelia
  • Pucher, Thomas
  • Martucciello, Nadia
  • Castellanos-Gómez, Andrés
  • Di Bartolomeo, Antonio
Two-dimensional van der Waals heterostructures offer a versatile platform for developing multifunctional optoelectronic devices, as their tuneable electronic and optical properties enable a wide range of applications. Among them, WS2/PdSe2 heterostructures exhibit attractive features, making them promising candidates for the realisation of broadband photodetectors and pressure optoelectronic sensors. In this study, WS2/PdSe2 heterostructures were fabricated and electrically characterised under different environmental and light conditions. WS2/PdSe2 heterostructures exhibit n-type conduction with an impressive ON/OFF current ratio up to 108, demonstrating their suitability for high-performance electronic devices. Their electrical properties were extensively investigated under different pressure conditions, from ambient pressure to high vacuum (103–10−4 mbar), both in the dark and under illumination. The results reveal that the adsorption and desorption of water and oxygen molecules on the materials’ surface play a crucial role in modulating the electrical response of the WS2/PdSe2 heterostructure. Analysis of the light response in the visible spectrum reveals a responsivity of up to 1.2 A W−1 at a wavelength of 620 nm. WS2/PdSe2-based devices were further tested as pressure optoelectronic sensors, monitoring the photocurrent evolution during transitions between high vacuum and ambient pressure. These findings open the way for various applications in the field of optoelectronics and sensing., A.D.B. thanks the University of Salerno, Italy, for funding this project through Grant ORSA243813. A.C.G. acknowledges funding by the Ministry of Science and Innovation (Spain) through the Projects TED2021-132267B-I00, PID2020-115566RB-I00, PDC2023-145 920-I00 and PID2023-151946OB-I00, and the European Research Council through the ERC-2024-PoC StEnSo (grant agreement 101185235)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemically-linked heterostructures of palladium nanosheets and 2H-MoS2

  • Quirós‐Ovies, Ramiro
  • Bastante, Pablo
  • Hettler, Simon
  • Vega-Mayoral, Víctor
  • Aina, Sergio
  • Balos, Vasileios
  • Pucher, Thomas
  • Castellanos-Gómez, Andrés
  • Arenal, Raúl
  • Cabanillas-Gonzalez, Juan
  • Pérez, Emilio M.
  • Santamaría, Jesús
  • Sebastián, Víctor
Special Section: EMRS 2024 ‐ Chemical Functionalization of 2D Materials., The burgeoning field of 2D heterostructures targets the combination of 2D materials with 3D, 1D, or 0D nanomaterials. Among the most popular 2D materials, the 2H polytype of molybdenum disulfide (MoS2) features a well-defined bandgap that becomes direct at the monolayer level, which can be exploited for photodetection. A notable limitation of 2H-MoS2 is its curtailed absorbance beyond the visible range. Here, a covalently-linked Pd nanosheet (PdNS)/functionalized MoS2 (f-MoS2) heterostructure is introduced, leveraging PdNS infrared-absorbing properties to surmount this constraint. A bifunctional molecule, featuring a maleimide for attachment to MoS2 and a phenyl bromide for connection to PdNS, enables the synthesis of the heterostructure. Comprehensive spectroscopic and microscopic characterization shed light on the structure of PdNS@f-MoS2 and the electronic interaction between its components. Prototype devices show an enhancement in the width and intensity of the optoelectronic response of PdNS@f-MoS2 in the infrared, up to 1700 nm. In comparison, a van der Waals heterostructure with the same components shows poorer photoresponse. The results prove that the covalent linkage of metal nanostructures to 2D materials is a promising approach to build mixed-dimensional heterostructures., V.S. acknowledged funding from Project Nos. PID2021-127847OB-I00 MCIN/AEI/10.13039/ 501100011033 and PDC2022-133866-I00 MCIN/AEI/10.13039/501100011033 (Unión Europea Next GenerationEU/PRTR). Authors would like to acknowledge Prof. Enrique Canovas for a fruitful discussion. Spanish Ministry of Science, Innovation and Universities (10.13039/501100011033) and support from the Regional Government of Madrid (Grant No. 2019-T2/IND-12737). V.V.-M. acknowledges grants No. TED2021-131906A-100 and No. RYC2022-035200-I funded by Spanish Ministry of Science, Innovation and Universities (10.13039/501100011033) and support from the Regional Government of Madrid (Grant No. 2019-T2/IND-12737). V.B. acknowledged Marie Skłodowska-Curie Actions programme MSCA-IF-2020-101030872. J.C.-G. acknowledged the MICINN-FEDER (No. PID2021-128313OB-I00), and support from the Regional Government of Madrid (NMAT2D-CM). J.C.G. also acknowledged a Research Consolidation Grant (No. CNS2022-36191 and PDC202-314587-1I00) from the Spanish Ministry of Science and Innovation. A.C.G. acknowledged funding from the Spanish Ministry of Science, Innovation and Universities (Grant Nos. TED2021-132267B-I00, PID2020-115566RB-I00, and PDC2023-145920-I00) and the EU FLAG-ERA project To2Dox (No. JTC-2019-009) and the Comunidad de Madrid through the CAIRO-CM project (No. Y2020/NMT-6661). IMDEA Nanociencia acknowledges support from the “Severo Ochoa” Programme for Centres of Excellence in R&D of the Spanish Ministry of Science and Innovation (No. CEX2020-001039-S). INMA, CSIC-Universidad, researchers acknowledge support from the “Severo Ochoa” Programme for Centres of Excellence in R&D of the Spanish Ministry of Science, Innovation and Universities (No. MICIU CEX2023-001286-S MICIU/AEI /10.13039/501100011033). Authors also thank CIBER-BBN, an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III and by Fondo Europeo de Desarrollo Regional (Feder) “Una manera de hacer Europa,” with the assistance of the European Regional Development Fund. LMA-ELECMI and NANBIOSIS ICTs are gratefully acknowledged. R.A. and S.H. acknowledged funding from European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement No. 889546, from the Gobierno de Aragón (DGA) under Project E13-23R, by the Spanish MICIU (No. PID2019-104739GB-100/AEI/10.13039/501100011033 and PID202-3151080N-BI00/AEI/10.13039/501100011033) and by the MICIU with funding from European Union Next Generation EU (No. PRTR-C17.I1) promoted by the Government of Aragon. The SEM and (S)TEM measurements were performed in the Laboratorio de Microscopias Avanzadas (LMA) at the Universidad de Zaragoza (Spain)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2020-001039-S)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed