Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Low-cost and biodegradable thermoelectric devices based on van der Waals semiconductors on paper substrates

  • Ersu, Gulsum
  • Munuera, Carmen
  • Mompeán, Federico J.
  • Vaquero, Daniel
  • Quereda, Jorge
  • Rodrigues, João Elias F.S.
  • Alonso, Jose A.
  • Flores, Eduardo
  • Ares Fernández, José Ramón
  • Ferrer, Isabel J.
  • Al-Enizi, Abdullah M.
  • Nafady, Ayman
  • Kuriakose, Sruthi
  • Island, Joshua O.
  • Castellanos Gómez, Andres
We present a method to fabricate handcrafted thermoelectric devices on standard office paper substrates. The devices are based on thin films of WS2, Te, and BP (P-type semiconductors) and TiS3 and TiS2 (N-type semiconductors), deposited by simply rubbing powder of these materials against paper. The thermoelectric properties of these semiconducting films revealed maximum Seebeck coefficients of (+1.32 ± 0.27) mV/K and (-0.82 ± 0.15) mV/K for WS2 and TiS3, respectively. Additionally, Peltier elements were fabricated by interconnecting the P-type and N-type films with graphite electrodes. A thermopower value up to 6.11 mV/K was obtained when the Peltier element is constructed with three junctions. The findings of this work show proof-of-concept devices to illustrate the potential application of semiconducting van der Waals materials in future thermoelectric power generation as well as temperature sensing for low-cost disposable electronic devices
Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Long-term stabilization of two-dimensional perovskites by encapsulation with hexagonal boron nitride

  • Seitz, Michael
  • Gant, Patricia
  • Castellanos-Gomez, Andres
  • Prins, Ferry
Metal halide perovskites are known to suffer from rapid degradation, limiting their direct applicability. Here, the degradation of phenethylammonium lead iodide (PEA2 PbI4) two-dimensional perovskites under ambient conditions was studied using fluorescence, absorbance, and fluorescence lifetime measurements. It was demonstrated that the long-term stability of two-dimensional perovskites could be achieved through the encapsulation with hexagonal boron nitride. While un-encapsulated perovskite flakes degraded within hours, the encapsulated perovskites were stable for at least three months. In addition, encapsulation considerably improved the stability under laser irradiation. The environmental stability, combined with the improved durability under illumination, is a critical ingredient for thorough spectroscopic studies of the intrinsic optoelectronic properties of this material platform, MS acknowledges the financial support of a fellowship from ”la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/IN17/11620040. MS has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 713673. FP acknowledges financial support from the Spanish Ministry of Economy and Competitiveness through The “María de Maeztu” Program for Units of Excellence in R and D (MDM-2014-0377) and the Comunidad de Madrid Talent Program for Experienced Researchers (2016-T1/IND-1209). ACG acknowledges financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement n◦ 755655, ERC-StG 2017 project 2D-TOPSENSE) and EU Graphene Flagship funding (Grant Graphene Core 2, 785219)
Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Biodegradable albumen dielectrics for high-mobility MoS2 phototransistors

  • Pucher, Thomas
  • Bastante Flores, Pablo
  • Parenti, Federico
  • Xie, Yong
  • Dimaggio, Elisabetta
  • Fiori, Gianluca
  • Castellanos Gómez, Andrés
This work demonstrates the fabrication and characterization of single-layer MoS2 field-effect transistors using biodegradable albumen (chicken eggwhite) as gate dielectric. By introducing albumen as an insulator for MoS2 transistors high carrier mobilities (up to ~90 cm2 V−1 s−1) are observed, which is remarkably superior to that obtained with commonly used SiO2 dielectric which we attribute to ionic gating due to the formation of an electric double layer in the albumen MoS2 interface. In addition, the investigated devices are characterized upon illumination, observing responsivities of 4.5 AW−1 (operated in photogating regime) and rise times as low as 52 ms (operated in photoconductivity regime). The presented study reveals the combination of albumen with van der Waals materials for prospective biodegradable and biocompatible optoelectronic device applications. Furthermore, the demonstrated universal fabrication process can be easily adopted to fabricate albumen-based devices with any other van der Waals material, This work was funded by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 755655, ERC-StG 2017 project 2D-TOPSENSE), ERC PEP2D (Contract No. 770047) and the Ministry of Science and Innovation (Spain) through the project PID2020-115566RB-I00. We also acknowledge funding from the EU FLAG-ERA project To2Dox (JTC-2019-009) and the Comunidad de Madrid through the CAIRO-CM project (Y2020/NMT-6661). Financial supports from the National Natural Science Foundation of China (NSFC) Grants (No. 62011530438, No. 61704129) are acknowledged. This work was partially supported by the Key Research and Development Program of Shaanxi (Program No. 2021KW-02), Fundamental Research Funds for the Central Universities (QTZX23026) and the fund of the State Key Laboratory of Solidification Processing in Northwestern Polytechnical University (grant no. SKLSP201612)
Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Integrating van der Waals materials on paper substrates for electrical and optical applications

Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Influence of vacuum thermal annealing and air exposure on the performance of single-layer MoS2 devices

  • Bastante Flores, Pablo
  • Pucher, Thomas
  • Castellanos Gómez, Andrés
Two-dimensional semiconducting materials such as MoS2 have gained significant attention for potential applications in electronic components due to their reduced dimensionality and exceptional electrical and optoelectronic properties. However, when reporting the performance of such 2D-based devices, one needs to consider the effect of the environment in which the characterization is carried out. Air exposure has a non-negligible impact on the electronic performance and vacuum thermal annealing is an established method to decrease the effects of adsorbates. Nevertheless, when measurements are performed in ambient conditions these effects arise again. In this work, we study the changes in the electrical and optoelectronic properties of single-layer MoS2-based devices at air exposure after thermal annealing treatment. Measurements are carried out in an in-situ vacuum thermal annealing system, enabling the recording of electrical performance degradation over time. Moreover, this work shows how hexagonal boron nitride (hBN) capping improves device performance, both in vacuum and after venting, as well as stability, by decreasing the degradation speed by around six times. The results suggest that vacuum thermal annealing and hBN capping are methods to mitigate the effects of air environment on these devices, This work was funded by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement n◦ 755655, ERCStG 2017 project 2D-TOPSENSE), and the Ministry of Science and Innovation (Spain) through the projects PID2020-115566RB-I00 and TED2021-132267B-I00, and CEX2018-000805-M-19-2, from which P B acknowledges financial support, ref. PRE2019-091388. We also acknowledge funding from the EU FLAG-ERA project To2Dox (JTC-2019-009) and the Comunidad de Madrid through the CAIRO-CM Project (Y2020/NMT-6661). ChatGPT (GPT-3.5, OpenAI’s largescale language-generation model) has been used to improve the title
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

In-Plane Anisotropic Optical and Mechanical Properties of Two-Dimensional MoO3

  • Puebla, Sergio
  • D'Agosta, Roberto
  • Sánchez Santolino, Gabriel
  • Frisenda, Riccardo
  • Munuera, Carmen
  • Castellanos Gómez, Andrés
Molybdenum trioxide (MoO3) in-plane anisotropy has increasingly attracted the attention of the scientific community in the last few years. Many of the observed in-plane anisotropic properties stem from the anisotropic refractive index and elastic constants of the material but a comprehensive analysis of these fundamental properties is still lacking. Here we employ Raman and micro-reflectance measurements, using polarized light, to determine the angular dependence of the refractive index of thin MoO3 flakes and we study the directional dependence of the MoO3 Young's modulus using the buckling metrology method. We found that MoO3 displays one of the largest in-plane anisotropic mechanical properties reported for 2D materials so far., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement n degrees 755655, ERC-StG 2017 project 2D-TOPSENSE), the European Commission, under the Graphene Flagship (Core 3, grant number 881603), the Spanish Ministry of Economy, Industry and Competitiveness through the grant MAT201787134-C2-2-R. R.F. acknowledges the support from the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) through a Juan de la Cierva-formacion fellowship 2017 FJCI-2017-32919. S.P. acknowledges the fellowship PRE2018-084818. R. D'A. acknowledges financial support from the grant Grupos Consolidados UPV/EHU del Gobierno Vasco (Grant No. IT1249-19), the support of the MICINN through the grant "SelectDFT" (Grant No. FIS2016-79464-P) and travel support from the MINECO grant "TowTherm" (Grant No. MINECOG17/A01). G.S.-S. acknowledges financial support from Spanish MICIU RTI2018-099054-J-I00 and MICINN IJC2018-038164-I. Electron microscopy observations were carried out at the Centro Nacional de Microscopia Electronica, CNME-UCM
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Strongly Anisotropic Strain-Tunability of Excitons in Exfoliated ZrSe<sub>3</sub>.

  • Li, Hao
  • Sánchez Santolino, Gabriel
  • Puebla, Sergio
  • Frisenda, Riccardo
  • Al-Enizi, Abdullah M.
  • Nafady, Ayman
  • D'Agosta, Roberto
  • Castellanos Gómez, Andrés
[EN] The effect of uniaxial strain on the band structure of ZrSe3 , a semiconducting material with a marked in-plane structural anisotropy, is studied. By using a modified three-point bending test apparatus, thin ZrSe3 flakes are subjected to uniaxial strain along different crystalline orientations monitoring the effect of strain on their optical properties through micro-reflectance spectroscopy. The obtained spectra show excitonic features that blueshift upon uniaxial tension. This shift is strongly dependent on the direction along which the strain is being applied. When the flakes are strained along the b-axis, the exciton peak shifts at 60-95 meV %-1 , while along the a-axis, the shift only reaches 0-15 meV %-1 . Ab initio calculations are conducted to study the influence of uniaxial strain, applied along different crystal directions, on the band structure and reflectance spectra of ZrSe3 , exhibiting a remarkable agreement with the experimental results., his project was funded from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 755655, ERC-StG 2017 project 2D-TOPSENSE). R.F. acknowledges the support from the Spanish Ministry of Economy, Industry and Competitiveness through a Juan de la Cierva-formación fellowship 2017 FJCI2017-32919. R.D. acknowledges the financial support of the Grupos Consolidados del Gobierno Basco (Grant IT1249-19) and the MINECO (Grant G17/A01). G.S.-S. acknowledges financial support from Spanish MICIU RTI2018-099054-J-I00 and MICINN IJC2018-038164-I. Electron microscopy observations were carried out at the Centro Nacional de Microscopia Electronica, CNME-UCM. R.D. also acknowledges useful discussions with D. Varsano. H.L. acknowledges the grant from China Scholarship Council (CSC) under no. 201907040070. The authors extend their sincere appreciation to the Distinguished Scientist Fellowship Program (DSFP) at King Saud University for funding of this work.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Large Biaxial Compressive Strain Tuning of Neutral and Charged Excitons in Single-Layer Transition Metal Dichalcogenides

  • Henríquez-Guerra, Eudomar
  • Li, Hao
  • Pasqués-Gramage, Pablo
  • Gosálbez-Martínez, Daniel
  • D’Agosta, Roberto
  • Castellanos-Gomez, Andres
  • Calvo, M. Reyes
  • Gosálbez-Martínez, Daniel|||/items/c8907d7c-643e-478e-a2b2-716d2d44f265
  • Pasqués-Gramage, Pablo|||/items/dc3f3ba2-2b1e-4cfa-9301-2f520e57bdd9
The absorption and emission of light in single-layer transition metal dichalcogenides are governed by the formation of excitonic quasiparticles. Strain provides a powerful technique to tune the optoelectronic properties of two-dimensional materials and thus to adjust their exciton energies. The effects of large compressive strain in the optical spectrum of two-dimensional (2D) semiconductors remain rather unexplored compared to those of tensile strain, mainly due to experimental constraints. Here, we induced large, uniform, biaxial compressive strain (∼1.2%) by cooling, down to 10 K, single-layer WS2, MoS2, WSe2, and MoSe2 deposited on polycarbonate substrates. We observed a significant strain-induced modulation of neutral exciton energies, with blue shifts up to 160 meV, larger than in any previous experiments. Our results indicate a remarkably efficient transfer of compressive strain, demonstrated by gauge factor values exceeding previous results and approaching theoretical expectations. At low temperatures, we investigated the effect of compressive strain on the resonances associated with the formation of charged excitons. In WS2, a notable reduction of gauge factors for charged compared to neutral excitons suggests an increase in their binding energy, which likely results from the effects of strain added to the influence of the polymeric substrate.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Direct Magnetic Evidence, Functionalization, and Low-Temperature Magneto-Electron Transport in Liquid-Phase Exfoliated FEPS3

  • Martín-Pérez, Lucía
  • Medina Rivero, Samara
  • Vázquez Sulleiro, Manuel
  • Naranjo, Alicia
  • Gómez Pérez, Inmaculada Jénnifer
  • Ruíz-González, María Luisa
  • Castellanos-Gómez, Andrés
  • García-Hernández, Mar
  • Pérez, Emilio M.
  • Burzurí, Enrique
[Abstract] Magnetism and the existence of magnetic order in a material is determined by its dimensionality. In this regard, the recent emergence of magnetic layered van der Waals (vdW) materials provides a wide playground to explore the exotic magnetism arising in the two-dimensional (2D) limit. The magnetism of 2D flakes, especially antiferromagnetic ones, however, cannot be easily probed by conventional magnetometry techniques, being often replaced by indirect methods like Raman spectroscopy. Here, we make use of an alternative approach to provide direct magnetic evidence of few-layer vdW materials, including antiferromagnets. We take advantage of a surfactant-free, liquid-phase exfoliation (LPE) method to obtain thousands of few-layer FePS3 flakes that can be quenched in a solvent and measured in a conventional SQUID magnetometer. We show a direct magnetic evidence of the antiferromagnetic transition in FePS3 few-layer flakes, concomitant with a clear reduction of the Néel temperature with the flake thickness, in contrast with previous Raman reports. The quality of the LPE FePS3 flakes allows the study of electron transport down to cryogenic temperatures. The significant through-flake conductance is sensitive to the antiferromagnetic order transition. Besides, an additional rich spectra of electron transport excitations, including secondary magnetic transitions and potentially magnon-phonon hybrid states, appear at low temperatures. Finally, we show that the LPE is additionally a good starting point for the mass covalent functionalization of 2D magnetic materials with functional molecules. This technique is extensible to any vdW magnetic family., E.B. acknowledges funds from Ministerio de Ciencia e Innovación in Spain (RTI2018-096075-A-C22, RYC2019-028429-I). E.M.P. thanks the Spanish Ministerio de Ciencia e Innovación (PID2020-116661RB-I00) and Comunidad de Madrid (P2018/NMT-4367). M.G.H. and A.C.-G. acknowledge funds from European Union Horizon 2020 research and innovation program (Graphene Core3-Grant agreement no. 881603 Graphene-based disruptive technologies), EU FLAG-ERA through the project To2Dox (JTC-2019-009), and Comunidad de Madrid through the project CAIRO-CM project (Y2020/NMT-6661). A.C.-G. also acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 755655, ERC-StG 2017 project 2D-TOPSENSE) and the Ministry of Science and Innovation (Spain) through the project PID2020-115566RB-I00. M.L.R.G. acknowledges support by the Spanish Ministry of Science and Innovation through Research Project PID 2020-113753RB-100. The National Centre for Electron Microscopy (ELECMI National Singular Scientific Facility) is also acknowledge for provision of access to corrected aberration microscopy facilities. CzechNanoLab Research Infrastructure supported by MEYS CR (LM2018110) is acknowledged, Comunidad de Madrid; P2018/NMT-4367, Comunidad de Madrid; Y2020/NMT-6661, República checa. Ministerstvo školství, mládeže a tělovýchovy České republiky; LM2018110
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publicación Artículo científico (JournalArticle)

Thickness-dependent differential reflectance spectra of monolayer and few-layer MoS2, MoSe2, WS2 and WSe2

  • Niu Y.
  • Gonzalez-Abad S.
  • Frisenda R.
  • Marauhn P.
  • Drüppel M.
  • Gant P.
  • Schmidt R.
  • Taghavi N.S.
  • Barcons D.
  • Molina-Mendoza A.J.
  • de Vasconcellos S.M.
  • Bratschitsch R.
  • De Lara D.P.
  • Rohlfing M.
  • Castellanos-Gomez A.
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publicación Artículo científico (JournalArticle)

A strain tunable single-layer MoS2 photodetector

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thickness-Dependent Differential Reflectance Spectra of Monolayer and Few-Layer MoS2, MoSe2, WS2 and WSe2

  • Niu, Yue
  • González Abad, Sergio
  • Frisenda, Riccardo
  • Marauhn, Philipp
  • Drüppel, Matthias
  • Gant, Patricia
  • Schmidt, Robert
  • Taghavi, Najme S.
  • Barcons, David
  • Molina-Mendoza, Aday J.
  • Vasconcellos, Steffen Michaelis de
  • Bratschitsch, Rudolf
  • Pérez de Lara, David
  • Rohlfing, Michael
  • Castellanos-Gómez, Andrés
This article belongs to the Special Issue Low Dimensional Materials for Environmental and Biomedical Applications., The research field of two dimensional (2D) materials strongly relies on optical microscopy characterization tools to identify atomically thin materials and to determine their number of layers. Moreover, optical microscopy-based techniques opened the door to study the optical properties of these nanomaterials. We presented a comprehensive study of the differential reflectance spectra of 2D semiconducting transition metal dichalcogenides (TMDCs), MoS2, MoSe2, WS2, and WSe2, with thickness ranging from one layer up to six layers. We analyzed the thickness-dependent energy of the different excitonic features, indicating the change in the band structure of the different TMDC materials with the number of layers. Our work provided a route to employ differential reflectance spectroscopy for determining the number of layers of MoS2, MoSe2, WS2, and WSe2., This project received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research, innovation programme (grant agreement No. 755655, ERC-StG 2017 project 2D-TOPSENSE), the EU Graphene Flagship funding (Grant Graphene Core 2, 785219), the Netherlands Organisation for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515, the MINECO (program FIS2015-67367-C2-1-P), and the China Scholarship Council (File NO. 201506120102).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polarization‐Sensitive and Broadband Photodetection Based on a Mixed‐Dimensionality TiS3/Si p–n Junction

  • Niu, Yue
  • Frisenda, Riccardo
  • Flores, Fernando
  • Ares, José R.
  • Jiao, Weicheng
  • Pérez de Lara, David
  • Sánchez López, Carlos
  • Wang, Rongguo
  • Ferrer, Isabel J.
  • Castellanos-Gómez, Andrés
The capability to detect the polarization state of light is crucial in many day‐life applications and scientific disciplines. Novel anisotropic 2D materials such as TiS3 combine polarization sensitivity, given by the in‐plane optical anisotropy, with excellent electrical properties. Here, the fabrication of a monolithic polarization‐sensitive broadband photodetector based on a mixed‐dimensionality TiS3/Si p–n junction is demonstrated. The fabricated devices show broadband responsivity up to 1050 nm, a strong sensitivity to linearly polarized illumination with difference between the two orthogonal polarization states up to 350%, and a good detectivity and fast response time. The discussed devices can be used as building blocks to fabricate more complex polarization‐sensitive systems such as polarimeters., The authors acknowledge funding from the EU Graphene Flagship (Grant Graphene Core2 785219) and from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement no. 755655, ERC‐StG 2017 project 2D‐TOPSENSE). R.F. acknowledges support from the Netherlands Organisation for Scientific Research (NWO) through the research program Rubicon with project number 680‐50‐1515. D.P.d.L. acknowledges support from the MINECO (program FIS2015‐67367‐C2‐1‐P). Y.N. acknowledges the grant from the China Scholarship Council (File No. 201506120102). W.C.J. acknowledges the Program for the Top Young and Middle‐aged Innovative Talents of Harbin Institute of Technology. MIRE group acknowledges financial support from MINECO‐FEDER (MAT2015‐65203‐R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Progress on Black Phosphorus Photonics

  • Deng, Bingchen
  • Frisenda, Riccardo
  • Li, Cheng
  • Chen, Xiaolong
  • Castellanos-Gómez, Andrés
  • Xia, Fengnian
This review is part of the Advanced Optical Materials Hall of Fame article series, which recognizes the excellent contributions of leading researchers to the field of optical materials science., Recent years have witnessed the rapidly growing interests in the rediscovered black phosphorus (BP), an elemental group‐V layered material with very high carrier mobility among all semiconducting layered materials. As a layered semiconductor, the bandgap of intrinsic BP varies from ≈0.3 to 2 eV depending on the thickness. This bandgap value can be tuned to below 50 meV by a moderate external electric field. Adsorption doping and external pressure can also effectively modify its bandgap. The largely tunable bandgap of BP makes it a promising material for infrared optics. Moreover, its unique puckered structure leads to the anisotropic in‐plane properties, making it ideal for the exploration of exotic physical phenomena and the realization of novel devices. Here, the fundamental optical properties are reviewed and latest developments on BP photonic and optoelectronic devices are discussed., The black phosphorus photonic work at Yale is primarily supported by the National Science Foundation EFRI‐2DARE program. F.X. also acknowledges the partial support by the Office of Naval Research Young Investigator Program (ONR‐YIP). A.C.‐G. acknowledges funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement no. 755655, ERC‐StG 2017 project 2D‐TOPSENSE). R.F. thanks the Netherlands Organisation for Scientific Research (NWO) for support through a Rubicon grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revisiting the Buckling Metrology Method to Determine the Young's Modulus of 2D Materials

  • Iguiniz, Nestor
  • Frisenda, Riccardo
  • Bratschitsch, Rudolf
  • Castellanos-Gómez, Andrés
Measuring the mechanical properties of 2D materials is a formidable task. While regular electrical and optical probing techniques are suitable even for atomically thin materials, conventional mechanical tests cannot be directly applied. Therefore, new mechanical testing techniques need to be developed. Up to now, the most widespread approaches require micro‐fabrication to create freely suspended membranes, rendering their implementation complex and costly. Here, a simple yet powerful technique is revisited to measure the mechanical properties of thin films. The buckling metrology method, that does not require the fabrication of freely suspended structures, is used to determine the Young's modulus of several transition metal dichalcogenides (MoS2, MoSe2, WS2, and WSe2) with thicknesses ranging from 2 to 10 layers. The obtained values for the Young's modulus and their uncertainty are critically compared with previously published results, finding that this simple technique provides results which are in good agreement with those reported using other highly sophisticated testing methods. By comparing the cost, complexity, and time required for the different methods reported in the literature, the buckling metrology method presents certain advantages that make it an interesting mechanical test tool for 2D materials., This project received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement n°755655, ERC‐StG 2017 project 2D‐TOPSENSE) and the European Union's Horizon 2020 Graphene Flagship funding (Grant Graphene Core2 785219)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Long-Term stabilization of two-dimensional perovskites by encapsulation with hexagonal boron nitride

  • Seitz, Michael
  • Gant, Patricia
  • Castellanos-Gómez, Andrés
  • Prins, Ferry
Metal halide perovskites are known to suffer from rapid degradation, limiting their direct applicability. Here, the degradation of phenethylammonium lead iodide (PEA<sub>2</sub>PbI<sub>4</sub>) two-dimensional perovskites under ambient conditions was studied using fluorescence, absorbance, and fluorescence lifetime measurements. It was demonstrated that the long-term stability of two-dimensional perovskites could be achieved through the encapsulation with hexagonal boron nitride. While un-encapsulated perovskite flakes degraded within hours, the encapsulated perovskites were stable for at least three months. In addition, encapsulation considerably improved the stability under laser irradiation. The environmental stability, combined with the improved durability under illumination, is a critical ingredient for thorough spectroscopic studies of the intrinsic optoelectronic properties of this material platform., MS acknowledges the financial support of a fellowship from ”la Caixa” Foundation (ID 100010434). The fellowship code is LCF/BQ/IN17/11620040. MS has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No. 713673. FP acknowledges financial support from the Spanish Ministry of Economy and Competitiveness through The “María de Maeztu” Program for Units of Excellence in R and D (MDM-2014-0377) and the Comunidad de Madrid Talent Program for Experienced Researchers (2016-T1/IND-1209). ACG acknowledges financial support from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement n° 755655, ERC-StG 2017 project 2D-TOPSENSE) and EU Graphene Flagship funding (Grant Graphene Core 2, 785219)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct transformation of crystalline MoO3 into few-layers MoS2

  • Carrascoso Plana, Félix
  • Sanchez-Santolino, Gabriel
  • Hsu, Chun-wei
  • Nemes, N. M.
  • Torres-Pardo, Almudena
  • Gant, Patricia
  • Mompean, Federico J.
  • Kalantar-Zadeh, Kourosh
  • Alonso, J. A.
  • García-Hernández, Mar
  • Frisenda, Riccardo
  • Castellanos-Gómez, Andrés
We fabricated large-area atomically thin MoS2 layers through the direct transformation of crystalline molybdenum trioxide (MoO3) by sulfurization at relatively low temperatures. The obtained MoS2 sheets are polycrystalline (~10–20 nm single-crystal domain size) with areas of up to 300 × 300 µm2, 2–4 layers in thickness and show a marked p-type behavior. The synthesized films are characterized by a combination of complementary techniques: Raman spectroscopy, X-ray diffraction, transmission electron microscopy and electronic transport measurements., ACG acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement n° 755655, ERC-StG 2017 project 2D-TOPSENSE) and from the EU Graphene Flagship funding (Grant Graphene Core 2, 785219). JAA thanks the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) for funding the project MAT2017-84496-R. RF acknowledges support from MINECO through a “Juan de la Cierva: formación” fellowship (2017 FJCI-2017-32919). GSS acknowledges financial support from MINECO (Juan de la Cierva 2015 program, FJCI-2015-25427)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anisotropic buckling of few-layer black phosphorus

  • Vaquero-Garzón, Luis
  • Frisenda, Riccardo
  • Castellanos-Gómez, Andrés
When a two-dimensional material, adhered onto a compliant substrate, is subjected to compression it can undergo a buckling instability yielding to a periodic rippling. Interestingly, when black phosphorus (bP) flakes are compressed along the zig-zag crystal direction, the flake buckles forming ripples with a 40% longer period than that obtained when the compression is applied along the armchair direction. This anisotropic buckling stems from the puckered honeycomb crystal structure of bP and a quantitative analysis of the ripple period allows the determination of the Youngs's modulus of few-layer bP along the armchair direction (E = 35.1 ± 6.3 GPa) and the zig-zag direction (E = 93.3 ± 21.8 GPa)., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant agreement no.755655, ERC-StG 2017 project 2D-TOPSENSE). RF acknowledges support from the Spanish Ministry of Economy, Industry and Competitiveness through a Juan de la Cierva Formación fellowship (2017 FJCI-2017-32919). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailored graphenic structures directly grown on titanium oxide boost the interfacial charge transfer

  • Muñoz, Roberto
  • Sánchez-Sánchez, Carlos
  • Merino, Pablo
  • López-Elvira, Elena
  • Munuera, C.
  • Gant, Patricia
  • López, María Francisca
  • Castellanos-Gómez, Andrés
  • Martín-Gago, José A.
  • García-Hernández, Mar
10 pags., 8 figs., 1 tab., The successful application of titanium oxide-graphene hybrids in the fields of photocatalysis, photovoltaics and photodetection strongly depends on the interfacial contact between both materials. The need to provide a good coupling between the enabling conductor and the photoactive phase prompted us to directly grow conducting graphenic structures on TiO crystals. We here report on the direct synthesis of tailored graphenic structures by using Plasma Assisted Chemical Vapour Deposition that present a clean junction with the prototypical titanium oxide (1 1 0) surface. Chemical analysis of the interface indicates chemical bonding between both materials. Photocurrent measurements under UV light illumination manifest that the charge transfer across the interface is efficient. Moreover, the influence of the synthesis atmosphere, gas precursor (CH) and diluents (Ar, O), on the interface and on the structure of the as-grown graphenic material is assessed. The inclusion of O promotes vertical growth of partially oxidized carbon nanodots/rods with controllable height and density. The deposition with Ar results in continuous graphenic films with low resistivity (ρ = 6.8 · 10 Ω·m). The synthesis protocols developed here are suitable to produce tailored carbon-semiconductor structures on a variety of practical substrates as thin films, pillars or nanoparticles., We acknowledge funding from the Spanish MINECO (Grants MAT2014-54231-C4-1-P, MAT2013-47898-C2-2-R and MAT2017-85089-C2-1-R), the EU via the ERC-Synergy Program (Grant ERC-2013-SYG-610256 NANOCOSMOS), the innovation program under grant agreement No. 696656 (Graphene Core1-Graphene-based disruptive technologies) and grant agreement No. 785219 (Graphene Core2-Graphene-based disruptive technologies) and the Comunidad Autónoma de Madrid (CAM) MAD2D-CM Program (S2013/MIT-3007and P2018/NMT-4367). C.S.S. acknowledges Juan de la Cierva program (IJCI-2014-19291). A.C.-G. acknowledges to grant agreement n°755655, ECR-StG 2017 project 2D-TOPSENSE.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of traps in the photocurrent generation mechanism in thin InSe photodetectors

  • Zhao, Qinghua
  • Wang, Wei
  • Carrascoso Plana, Félix
  • Jie, Wanqi
  • Wang, Tao
  • Castellanos-Gómez, Andrés
  • Frisenda, Riccardo
Due to the excellent electrical transport properties and optoelectronic performance, thin indium selenide (InSe) has recently attracted attention in the field of 2D semiconducting materials. However, the mechanism behind the photocurrent generation in thin InSe photodetectors remains elusive. Here, we present a set of experiments aimed at explaining the strong scattering in the photoresponsivity values reported in the literature for thin InSe photodetectors. By performing optoelectronic measurements on thin InSe-based photodetectors operated under different environmental conditions we find that the photoresponsivity, the response time and the photocurrent power dependency are strongly correlated in this material. This observation indicates that the photogating effect plays an imporant role in thin InSe flakes, and it is the dominant mechanism in the ultra-high photoresponsivity of pristine InSe devices. In addition, when exposing the pristine InSe photodetectors to the ambient environment we observe a fast and irreversible change in the photoresponse, with a decrease in the photoresponsivity accompanied by an increase of the operating speed. We attribute this photodetector performance change (upon atmospheric exposure) to the decrease in the density of the traps present in InSe, due to the passivation of selenium vacancies by atmospheric oxygen species. This passivation is accompanied by a downward shift of the InSe Fermi level and by a decrease of the Fermi level pinning, which leads to an increase of the Schottky barrier between Au and InSe. Our study reveals the important role of traps induced by defects in tailoring the properties of devices based on 2D materials and offers a controllable route to design and functionalize thin InSe photodetectors to realize devices with either ultrahigh photoresposivity or fast operation speed., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement no 755655, ERC-StG 2017 project 2D-TOPSENSE). EU Graphene Flagship funding (Grant Graphene Core 2, 785219) is acknowledged. RF acknowledges support from the Netherlands Organization for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515 and from the Spanish Ministry of Economy, Industry and Competitiveness through a Juan de la Cierva-formación fellowship (2017 FJCI-2017-32919). QHZ acknowledges the grant from China Scholarship Council (CSC) under No. 201700290035. TW acknowledges support from the National Natural Science Foundation of China: 51672216, We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superlattices based on van der Waals 2D materials

  • Kyoung Ryu, Yu
  • Frisenda, Riccardo
  • Castellanos-Gómez, Andrés
Two-dimensional (2D) materials exhibit a number of improved mechanical, optical, and electronic properties compared to their bulk counterparts. The absence of dangling bonds in the cleaved surfaces of these materials allows combining different 2D materials into van der Waals heterostructures to fabricate p-n junctions, photodetectors, and 2D-2D ohmic contacts that show unexpected performances. These intriguing results are regularly summarized in comprehensive reviews. A strategy to tailor their properties even further and to observe novel quantum phenomena consists in the fabrication of superlattices whose unit cell is formed either by two dissimilar 2D materials or by a 2D material subjected to a periodic perturbation, each component contributing with different characteristics. Furthermore, in a 2D material-based superlattice, the interlayer interaction between the layers mediated by van der Waals forces constitutes a key parameter to tune the global properties of the superlattice. The above-mentioned factors reflect the potential to devise countless combinations of van der Waals 2D material-based superlattices. In the present feature article, we explain in detail the state-of-the-art of 2D material-based superlattices and describe the different methods to fabricate them, classified as vertical stacking, intercalation with atoms or molecules, moiré patterning, strain engineering and lithographic design. We also aim to highlight some of the specific applications of each type of superlattices., This project has received funding from the European Research Council (ERC) under European Union's Horizon 2020 research and innovation programme (grant agreement no 755655, ERC-StG 2017 project 2D-TOPSENSE). R. F. acknowledges the support from the Spanish Ministry of Economy, Industry and Competitiveness through a Juan de la Cierva-formación fellowship 2017 FJCI-2017-32919. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

InSe: A two-dimensional semiconductor with superior flexibility

  • Zhao, Qinghua
  • Frisenda, Riccardo
  • Wang, Tao
  • Castellanos-Gómez, Andrés
Two-dimensional indium selenide (InSe) has attracted extensive attention recently due to its record-high charge carrier mobility and photoresponsivity in the fields of electronics and optoelectronics. Nevertheless, the mechanical properties of this material in the ultra-thin regime have not been investigated yet. Here, we present our efforts to determine the Young's modulus of thin InSe (∼1-2 layers to ∼34 layers) flakes experimentally by using a buckling-based methodology. We find that the Young's modulus has a value of 23.1 ± 5.2 GPa, one of the lowest values reported to date for crystalline two-dimensional materials. This superior flexibility can be very attractive for different applications, such as strain engineering and flexible electronics., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement no. 755655, ERC-StG 2017 project 2D-TOPSENSE). EU Graphene Flagship funding (Grant Graphene Core 2, 785219) is acknowledged. RF acknowledges support from the Spanish Ministry of Economy, Industry and Competitiveness through a Juan de la Cierva-formación fellowship (2017 FJCI-2017-32919). QHZ acknowledges the grant from the China Scholarship Council (CSC) under no. 201700290035. TW acknowledges support from the National Natural Science Foundation of China: 51672216., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical-Based Thickness Measurement of MoO3 Nanosheets

  • Puebla, Sergio
  • Mariscal, A.
  • Serna, Rosalía
  • Munuera, C.
  • Castellanos-Gómez, Andrés
10 pags., 5 figs. -- This article belongs to the Special Issue 2D Materials and Heterostructures with Application in Optoelectronics, Considering that two-dimensional (2D) molybdenum trioxide has acquired more attention in the last few years, it is relevant to speed up thickness identification of this material. We provide two fast and non-destructive methods to evaluate the thickness of MoO3 flakes on SiO2/Si substrates. First, by means of quantitative analysis of the apparent color of the flakes in optical microscopy images, one can make a first approximation of the thickness with an uncertainty of 3 nm. The second method is based on the fit of optical contrast spectra, acquired with micro-reflectance measurements, to a Fresnel law-based model that provides an accurate measurement of the flake thickness with +-2 nm of uncertainty., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement n◦ 755655, ERC-StG 2017 project 2D-TOPSENSE), the European Commission, under the Graphene Flagship (Core 3, grant number 881603), the Spanish Ministry of Economy, Industry and Competitiveness through the grant MAT2017-87134-C2-2-R and partially funded by the Spanish Ministerio de Ciencia e Innovación through grant RTI2018-096498-B-I00 (MCIU/AEI/FEDER, UE). SP acknowledges the fellowship PRE2018-084818.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combining Freestanding Ferroelectric Perovskite Oxides with Two-Dimensional Semiconductors for High Performance Transistors

  • Puebla, Sergio
  • Pucher, Thomas
  • Rouco, Víctor
  • Sanchez-Santolino, Gabriel
  • Xie, Yong
  • Zamora, Víctor
  • Cuellar, Fabián A.
  • Mompean, Federico J.
  • León, Carlos
  • Island, Joshua O.
  • García-Hernández, Mar
  • Santamaría, Jacobo
  • Munuera, C.
  • Castellanos-Gómez, Andrés
[EN] We demonstrate the fabrication of field-effect transistors based on single-layer MoS2 and a thin layer of BaTiO3 (BTO) dielectric, isolated from its parent epitaxial template substrate. Thin BTO provides an ultrahigh-κ gate dielectric effectively screening Coulomb scattering centers. These devices show mobilities substantially larger than those obtained with standard SiO2 dielectrics and comparable with values obtained with hexagonal boron nitride, a dielectric employed for fabrication of high-performance two-dimensional (2D) based devices. Moreover, the ferroelectric character of BTO induces a robust hysteresis of the current vs gate voltage characteristics, attributed to it polarization switching. This hysteresis is strongly suppressed when the device is warmed up above the tetragonal-to-cubic transition temperature of BTO that leads to a ferroelectric-to-paraelectric transition. This hysteretic behavior is attractive for applications in memory storage devices. Our results open the door to the integration of a large family of complex oxides exhibiting strongly correlated physics in 2D-based devices., European Research Council (ERC) through the project 2DTOPSENSE (GA 755655) European Union’sHorizon 2020 research and innovation program (Graphene Core2-Graphenebased disruptive technologies and Grant Agreement 881603 Graphene Core3-Graphene-based disruptive technologies) EU FLAG-ERA through the project To2Dox (JTC-2019-009) Comunidad de Madrid through the project CAIRO-CM project (Y2020/NMT-6661) Spanish Ministry of Science and Innovation through the projects PID2020-118078RBI00 RTI2018-099054-J-I00 and IJC2018-038164-I, PRE2018-084818 Key Research and Development Program of Shaanxi (Program No.2021KW-02)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Eco-Friendly Disposable WS2 Paper Sensor for Sub-ppm NO2 Detection at Room Temperature

  • Matatagui, Daniel
  • Cruz, Carlos
  • Carrascoso, Félix
  • Al-Enizi, Abdullah M.
  • Nafady, Ayman
  • Castellanos-Gómez, Andrés
  • Horrillo, Carmen
12 páginas, 8 figuras, We developed inexpensive and disposable gas sensors with a low environmental footprint. This approach is based on a biodegradable substrate, paper, and features safe and nontoxic electronic materials. We show that abrasion-induced deposited WS nanoplatelets on paper can be employed as a successful sensing layer to develop high-sensitivity and selective sensors, which operate even at room temperature. Its performance is investigated, at room temperature, against NO exposure, finding that the electrical resistance of the device drops dramatically upon NO adsorption, decreasing by ~42% (~31% half a year later) for 0.8 ppm concentration, and establishing a detection limit around~2 ppb (~3 ppb half a year later). The sensor is highly selective towards NO gas with respect to the interferents NH and CO, whose responses were only 1.8% (obtained for 30 ppm) and 1.5% (obtained for 8 ppm), respectively. Interestingly, an improved response of the developed sensor under humid conditions was observed (tested for 25% relative humidity at 23 C). The high-performance, in conjunction with its small dimensions, low cost, operation at room temperature, and the possibility of using it as a portable system, makes this sensor a promising candidate for continuous monitoring of NO on-site., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement n◦755655, ERC-StG 2017 project 2 D-TOPSENSE) and the Ministry of Science and Innovation (Spain) through the project PID2020-115566 RB-I00 and RTI2018-095856-B-C22 (AEI/FEDER). The authors extend their sincere appreciation to the Distinguished Scientist Fellowship Program (DSFP) at King Saud University for funding of this work. D. M. acknowledges the financial support from the Fundación General CSIC via Programa ComFuturo.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct Magnetic Evidence, Functionalization, and Low-Temperature Magneto-Electron Transport in Liquid-Phase Exfoliated FePS3

  • Martín-Pérez, Lucía
  • Medina Rivero, Samara
  • Vázquez Sulleiro, Manuel
  • Naranjo, Alicia
  • Gómez, I. Jénnifer
  • Ruíz-González, María Luisa
  • Castellanos-Gómez, Andrés
[EN] Magnetism and the existence of magnetic order in a material is determined by its dimensionality. In this regard, the recent emergence of magnetic layered van der Waals (vdW) materials provides a wide playground to explore the exotic magnetism arising in the two-dimensional (2D) limit. The magnetism of 2D flakes, especially antiferromagnetic ones, however, cannot be easily probed by conventional magnetometry techniques, being often replaced by indirect methods like Raman spectroscopy. Here, we make use of an alternative approach to provide direct magnetic evidence of few-layer vdW materials, including antiferromagnets. We take advantage of a surfactant-free, liquid-phase exfoliation (LPE) method to obtain thousands of few-layer FePS3 flakes that can be quenched in a solvent and measured in a conventional SQUID magnetometer. We show a direct magnetic evidence of the antiferromagnetic transition in FePS3 few-layer flakes, concomitant with a clear reduction of the Néel temperature with the flake thickness, in contrast with previous Raman reports. The quality of the LPE FePS3 flakes allows the study of electron transport down to cryogenic temperatures. The significant through-flake conductance is sensitive to the antiferromagnetic order transition. Besides, an additional rich spectra of electron transport excitations, including secondary magnetic transitions and potentially magnon-phonon hybrid states, appear at low temperatures. Finally, we show that the LPE is additionally a good starting point for the mass covalent functionalization of 2D magnetic materials with functional molecules. This technique is extensible to any vdW magnetic family., Funds from Ministerio de Ciencia e Innovación in Spain (RTI2018-096075-A-C22, RYC2019-028429-I). E.M.P. thanks the Spanish Ministerio de Ciencia e Innovación (PID2020-116661RB-I00) and Comunidad de Madrid (P2018/NMT-4367). M.G.H. and A.C.-G. acknowledge funds from European Union Horizon 2020 research and innovation program (Graphene Core3-Grant agreement no. 881603 Graphene-based disruptive technologies), EU FLAGACS ERA through the project To2Dox (JTC-2019-009), andComunidad de Madrid through the project CAIRO-CMproject (Y2020/NMT-6661). A.C.-G. also acknowledges funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement no. 755655, ERC-StG 2017 project 2D-TOPSENSE) and the Ministry of Science and Innovation (Spain) through the project PID2020-115566RB-I00. M.L.R.G. acknowledges support by the Spanish Ministry of Science and Innovation through Research Project PID 2020- 113753RB-100. The National Centre for Electron Microscopy (ELECMI National Singular Scientific Facility) is also acknowledge for provision of access to corrected aberration microscopy facilities. CzechNanoLab Research Infrastructure supported by MEYS CR (LM2018110) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low T direct plasma assisted growth of graphene on sapphire and its integration in graphene/MoS2 heterostructure-based photodetectors

  • Muñoz, Roberto
  • López-Elvira, Elena
  • Munuera, C.
  • Carrascoso Plana, Félix
  • Xie, Yong
  • Çakıroğlu, Onur
  • Pucher, Thomas
  • Puebla, Sergio
  • Castellanos-Gómez, Andrés
  • García-Hernández, Mar
[EN] We report on outstanding photo-responsivity, R > 103 A/W, fast response (~0.1 s), and broadband sensitivity ranging from the UV to the NIR in two terminal graphene/MoS2 photodetectors. Our devices are based on the deterministic transfer of MoS2 on top of directly grown graphene on sapphire, and their performance outperforms previous similar photodetectors using large-scale grown graphene. Here we devise a protocol for the direct growth of transparent (transmittance, Tr > 90%), highly conductive (sheet resistance, R□ < 1 kΩ) uniform and continuous graphene films on sapphire at 700 °C by using plasma-assisted chemical vapor deposition (CVD) with C2H2/H2 gas mixtures. Our study demonstrates the successful use of plasma-assisted low-temperature CVD techniques to directly grow graphene on insulators for optoelectronic applications., We acknowledge funding from the innovation program under grant agreements No. 785219 (Graphene Core2-Graphene-based disruptive technologies) and No. 881603 (Graphene Core3-Graphene-based disruptive technologies). A.C.-G. acknowledges to grant agreement n° 755655, ECR-StG 2017 project 2D-TOPSENSE. O.C. acknowledges The European Union’s Horizon 2020 research and innovation program under the grant agreement 956813 (2Exciting). S.P. acknowledges the Spanish Ministry of Science and Innovation (Grant PRE2018-084818). Y.X. acknowledges the Key Research and Development Program of Shaanxi (Program No.2021KW-02)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biaxial versus uniaxial strain tuning of single-layer MoS2

  • Carrascoso Plana, Félix
  • Frisenda, Riccardo
  • Castellanos-Gómez, Andrés
Strain engineering has arisen as a powerful technique to tune the electronic and optical properties of two-dimensional semiconductors like molybdenum disulfide (MoS2). Although several theoretical works predicted that biaxial strain would be more effective than uniaxial strain to tune the band structure of MoS2, a direct experimental verification is still missing in the literature. Here we implemented a simple experimental setup that allows to apply biaxial strain through the bending of a cruciform polymer substrate. We used the setup to study the effect of biaxial strain on the differential reflectance spectra of 12 single-layer MoS2 flakes finding a redshift of the excitonic features at a rate between −40 meV/% and −110 meV/% of biaxial tension. We also directly compare the effect of biaxial and uniaxial strain on the same single-layer MoS2 finding that the biaxial strain gauge factor is 2.3 times larger than the uniaxial strain one. © 2021 Chongqing University, This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement n 755655, ERC-StG 2017 project 2D-TOPSENSE). R.F. acknowledges the support from the Spanish Ministry of Economy, Industry and Competitiveness through a Juan de la Cierva-formación fellowship 2017 FJCI2017-32919., Supplementary data to this article can be found online at https ://doi.org/10.1016/j.nanoms.2021.03.001, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Throughput Mechanical Exfoliation for Low-Cost Production of van der Waals Nanosheets

  • Sözen, Yiğit
  • Riquelme, Juan J.
  • Xie, Yong
  • Munuera, C.
  • Castellanos-Gómez, Andrés
A method is presented for scaling up the production of flakes of van der Waals materials via mechanical exfoliation. Using a roll-to-roll setup and an automatized, massive parallel exfoliation process, adhesive tapes with a high density of nanosheets of van der Waals materials are produced. The technique allows for obtaining a good trade-off between large lateral size and excellent area scalability, while also maintaining low cost. The potential of the method is demonstrated through the successful fabrication of field effect transistors and flexible photodetectors in large batches. This low-cost method to produce large area films out of mechanically exfoliated flakes is very general, and it can be applied to a variety of substrates and van der Waals materials and, moreover, it can be used to combine different van der Waals materials on top of each other. Therefore, it is believed that this production method opens an interesting avenue for fabrication of low-cost devices while maintaining a good scalability and performance. © 2023 The Authors. Small Methods published by Wiley-VCH GmbH., The authors thank Thomas Pucher for his help in some of the device fabrication steps. This work was funded by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement no. 755655, ERC-StG 2017 project 2D-TOPSENSE), the Ministry of Science and Innovation (Spain) through the projects TED2021-132267B-I00, PID2020-115566RB-I00 and PRE2021-098348. The authors also acknowledge funding from the ″FLAG-ERA program (JTC 2019) under the project To2Dox (PCI2019-111893-2), the Comunidad de Madrid through the CAIRO-CM project (Y2020/NMT-6661) and the CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094., The data that support the findings of this study are available from the cor-responding author upon reasonable request, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of traps in the photocurrent generation mechanism in thin InSe photodetectors

  • Zhao, Qinghua
  • Wang, Wei
  • Carrascoso Plana, Félix
  • Jie, Wanqi
  • Wang, Tao
  • Castellanos-Gómez, Andrés
  • Frisenda, Riccardo
Due to the excellent electrical transport properties and optoelectronic performance, thin indium selenide (InSe) has recently attracted attention in the field of 2D semiconducting materials. However, the mechanism behind the photocurrent generation in thin InSe photodetectors remains elusive. Here, we present a set of experiments aimed at explaining the strong scattering in the photoresponsivity values reported in the literature for thin InSe photodetectors. By performing optoelectronic measurements on thin InSe-based photodetectors operated under different environmental conditions we find that the photoresponsivity, the response time and the photocurrent power dependency are strongly correlated in this material. This observation indicates that the photogating effect plays an imporant role in thin InSe flakes, and it is the dominant mechanism in the ultra-high photoresponsivity of pristine InSe devices. In addition, when exposing the pristine InSe photodetectors to the ambient environment we observe a fast and irreversible change in the photoresponse, with a decrease in the photoresponsivity accompanied by an increase of the operating speed. We attribute this photodetector performance change (upon atmospheric exposure) to the decrease in the density of the traps present in InSe, due to the passivation of selenium vacancies by atmospheric oxygen species. This passivation is accompanied by a downward shift of the InSe Fermi level and by a decrease of the Fermi level pinning, which leads to an increase of the Schottky barrier between Au and InSe. Our study reveals the important role of traps induced by defects in tailoring the properties of devices based on 2D materials and offers a controllable route to design and functionalize thin InSe photodetectors to realize devices with either ultrahigh photoresposivity or fast operation speed. © 2019 The Royal Society of Chemistry., This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement no 755655, ERC-StG 2017 project 2D-TOPSENSE). EU Graphene Flagship funding (Grant Graphene Core 2, 785219) is acknowledged. RF acknowledges support from the Netherlands Organization for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515 and from the Spanish Ministry of Economy, Industry and Competitiveness through a Juan de la Cierva-formacio´n fellowship (2017 FJCI-2017-32919). QHZ acknowledges the grant from China Scholarship Council (CSC) under No. 201700290035. TW acknowledges support from the National Natural Science Foundation of China: 51672216., Supplementary material, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A strain tunable single-layer MoS2 photodetector

  • Gant, Patricia
  • Huang, Peng
  • Pérez de Lara, David
  • Guo, Dan
  • Frisenda, Riccardo
  • Castellanos-Gómez, Andrés
Strain engineering, which aims to tune the bandgap of a semiconductor by the application of strain, has emerged as an interesting way to control the electrical and optical properties of two-dimensional (2D) materials. Apart from the changes in the intrinsic properties of 2D materials, the application of strain can also be used to modify the characteristics of devices based on them. In this work, we study flexible and transparent photodetectors based on single-layer MoS2 under the application of biaxial strain. We find that by controlling the level of strain, we can tune the photoresponsivity (by 2–3 orders of magnitude), the response time (from <80 ms to 1.5 s), and the spectral bandwidth (with a gauge factor of 135 meV/% or 58 nm/%) of the device. © 2019 The Authors, This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (grant agreement n° 755655, ERC-StG 2017 project 2D-TOPSENSE). ACG and PG acknowledge funding from the EU Graphene Flagship funding (Grant Graphene Core 2, 785219). RF acknowledges support from the Netherlands Organization for Scientific Research (NWO) through the research program Rubicon with project number 680-50-1515. DPdL acknowledges support from MINECO through the program FIS2015-67367-C2-1-p., Supplementary material, Peer reviewed