Pasar al contenido principal

MATERIALES PARA CONVERSION DE ENERGIA: OXIDOS, CALCOGENUROS, PNICTUROS Y HALUROS

MAT2017-84496-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 23
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

SnSe: Kx intermetallic thermoelectric polycrystals prepared by arc-melting

  • Gainza, Javier
  • Molto, Sergio
  • Serrano Sánchez, Federico
  • Dura, Óscar
  • Fernández Díaz, Maria Teresa
  • Biskup Zaja, Nevenko
  • Martínez, Jose Luis
  • Alonso, José Antonio
  • Nemes, Norbert Marcel
Neutron powder diffraction and thermoelectric characterization of SnSe:Kx intermetallic alloys are presented. Nanostructured ingots were prepared by arc-melting elemental tin and selenium along with potassium hydride. Up to x = 0.1 of K can be incorporated into SnSe. Rietveld refinement of the diffractograms locates potassium on the Sn site in the high-temperature Cmcm structure. However, in the low-temperature Pnma structure, K cannot be localized by difference Fourier maps, indicating the incorporation of K in a disordered form in the interlayer space. STEM-EELS indicates the incorporation of K into the SnSe grains. The resistivity upon K-doping at intermediate temperatures decreases by 1–2 orders of magnitude, but at high temperature is higher than the undoped SnSe. The Seebeck coefficient of K-doped SnSe remains p-type and almost temperature independent (400 μV/K for x = 0.1). The ultralow thermal conductivity of undoped SnSe decreases further upon K-doping to below 0.3 W/m K.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Crystal Structure of Defect KBB’O6 Pyrochlores (B,B’: Nb,W,Sb,Te) Revisited from Neutron Diffraction Data

  • Mayer, Sergio F.
  • Falcon, Horacio
  • Fernández-Díaz, M. T.
  • Alonso, J. A.
Three defect pyrochlores KNbWO6·xH2O, KNbTeO6 and KSbWO6 were synthesized by solid state reaction at 750 ◦C, from stoichiometric mixtures of K2C2O4, Sb2O3, Nb2O5, WO3 and 20% excess TeO2. A neutron powder diffraction (NPD) data analysis allowed unveiling some structural features. They are all defined in the cubic Fd3m space group symmetry, with α = 10.5068(1) Å, 10.2466(1) Å and 10.2377(1) Å, respectively. Difference Fourier synthesis for KNbWO6·xH2O clearly showed the presence of crystallization water, with extra O’ oxygen and H+ atoms that were located from NPD data. These O’ oxygen atoms are placed at 32e Wyckoff sites, conforming a K2O’ sublattice interpenetrated with the covalent framework constituted by (Nb,W)O6 octahedra. The H+ ions coordinate the O’ atoms at partially occupied 96g Wyckoff sites while K+ ions shift also along 32esites, but closer to the 16c special site (0,0,0). By contrast, extra H2O molecules are absent in the other two pyrochlores: in KNbTeO6 and KSbWO6 K+ions are shifted along 32e (x,x,x) sites further away from the origin than for the previous material, and the higher covalency of the octahedral networkdetermines more compact structures, with shorter B–O distances and narrower B–O–B angles in the proposed AB2O6 defect pyrochlore structure., Ministerio de Economía, Industria y Competitividad, Gobierno de España: MAT2017-84496-R. Consejo Superior de Investigaciones Científicas: COOPA-20173., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dual oxygen defects in layered La1.2Sr0.8−xBaxInO4+δ (x = 0.2, 0.3) oxide-ion conductors: a neutron diffraction study

  • Troncoso, Loreto
  • Mariño, Carlos
  • Arce, Mauricio D.
  • Alonso, J. A.
© The Author(s)., The title compounds exhibit a K2NiF4-type layered perovskite structure; they are based on the La1.2Sr0.8InO4+δ oxide, which was found to exhibit excellent features as fast oxide-ion conductor via an interstitial oxygen mechanism. These new Ba-containing materials were designed to present a more open framework to enhance oxygen conduction. The citrate-nitrate soft-chemistry technique was used to synthesize such structural perovskite-type materials, followed by annealing in air at moderate temperatures (1150 °C). The subtleties of their crystal structures were investigated from neutron powder diffraction (NPD) data. They crystallize in the orthorhombic Pbca space group. Interstitial O3 oxygen atoms were identified by difference Fourier maps in the NaCl layer of the K2NiF4 structure. At variance with the parent compound, conspicuous oxygen vacancies were found at the O2-type oxygen atoms for x = 0.2, corresponding to the axial positions of the InO6 octahedra. The short O2–O3 distances and the absence of steric impediments suggest a dual oxygen-interstitial mechanism for oxide-ion conduction in these materials. Conductivity measurements show that the activation energy values are comparable to those typical of ionic conductors working by simple vacancy mechanisms (~1 eV). The increment of the total conductivity for x = 0.2 can be due to the mixed mechanism driving both oxygen vacancies and interstitials, which is original for these potential electrolytes for solid-oxide fuel cells., J.A.A. thanks the Spanish Ministry of Economy and Competitivity for granting the project MAT2017-84496-R, and PSI-SINQ for making all facilities available for the neutron diffraction experiments. L.T. and C.M. thanks the support from CONICYT Chile (Fondecyt grant 11170068) and M.D.A. thanks CONICET (PICT 2016-2965) and CNEA for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design, synthesis, structure and properties of Ba-doped derivatives of SrCo0.95Ru0.05O3−δ perovskite as cathode materials for SOFCs

  • Sydyknazar, Sabina
  • Cascos, Vanessa
  • Troncoso, Loreto
  • Larralde, Ana Laura
  • Fernández-Díaz, M. T.
  • Alonso, J. A.
We have designed and prepared a novel cathode material for solid oxide fuel cell (SOFC) based on SrCo0.95Ru0.05O3−δ perovskite. We have partially replaced Sr by Ba in Sr0.9Ba0.1Co0.95Ru0.05O3−δ (SBCRO) in order to expand the unit-cell size, thereby improving the ionic diffusion of O2− through the crystal lattice. The characterization of this new oxide has been studied at room temperature by X-ray diffraction (XRD) and neutron powder diffraction (NPD) experiments. At room temperature, SBCRO perovskite crystallizes in the P4/mmm tetragonal space group, as observed from NDP data. The maximum conductivity value of 18.6 S cm−1 is observed at 850 °C. Polarization resistance measurements on LSGM electrolyte demonstrate an improvement in conductivity with respect to the parent Sr-only perovskite cathode. A good chemical compatibility and an adequate thermal expansion coefficient make this oxide auspicious for using it as a cathode in SOFC., This research was funded by Spanish Ministry of Industry and Competitiveness, project number MAT2017-84496-R, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of nanostructuration on PbTe alloys synthesized by Arc-Melting

  • Gainza, Javier
  • Serrano-Sánchez, Federico
  • Biskup, N.
  • Nemes, N. M.
  • Martínez, J. L.
  • Fernández-Díaz, M. T.
  • Alonso, J. A.
PbTe-based alloys have the best thermoelectric properties for intermediate temperature applications (500–900 K). We report on the preparation of pristine PbTe and two doped derivatives (Pb0.99Sb0.01Te and Ag0.05Sb0.05Pb0.9Te, so-called LAST18) by a fast arc-melting technique, yielding nanostructured polycrystalline pellets. XRD and neutron powder diffraction (NPD) data assessed the a slight Te deficiency for PbTe, also yielding trends on the displacement factors of the 4a and 4b sites of the cubic Fm-3m space group. Interestingly, SEM analysis shows the conspicuous formation of layers assembled as stackings of nano-sheets, with 20–30 nm thickness. TEM analysis shows intra-sheet nanostructuration on the 50 nm scale in the form of polycrystalline grains. Large numbers of grain boundaries are created by this nanostructuration and this may contribute to reduce the thermal conductivity to a record-low value of 1.6 Wm−1K−1 at room temperature. In LAST18, a positive Seebeck coefficient up to 600 μV K−1 at 450 K was observed, contributing further towards improving potential thermoelectric efficiency., This research was funded by the Spanish Ministry of Science, Innovation and Universities for granting the project MAT2017-84496-R and RTI2018-097895-B-C43. We are grateful to the Spanish Ministry of Science, Innovation and Universities (MICIIN) for granting the projects MAT2017-84496-R and RTI2018-097895-B-C43, and to ILL for making all facilities available for the neutron diffraction experiments. J.G. thanks MICINN for granting the FPI contract PRE2018-083398. TEM measurements were performed in the Centro Nacional de Microscopía Electrónica (CNME) at the Universidad Complutense de Madrid (UCM)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Correlation between Crystal Structure and Thermoelectric Properties of Sr1−xTi0.9Nb0.1O3−δ Ceramics

  • Prado-Gonjal, Jesús
  • López, C. A.
  • Pinacca, R. M.
  • Serrano-Sánchez, Federico
  • Nemes, N. M.
  • Dura, Oscar J.
  • Martínez, José L.
  • Fernández-Díaz, M. T.
  • Alonso, J. A.
© 2020 by the authors., Polycrystalline Sr1−xTi0.9Nb0.1O3−δ (x = 0, 0.1, 0.2) ceramics have been prepared by the solid state method and their structural and thermoelectric properties have been studied by neutron powder diffraction (NPD), thermal, and transport measurements. The structural analysis of Sr1-xTi0.9Nb0.1O3−δ (x = 0.1, 0.2) confirms the presence of a significant amount of oxygen vacancies, associated with the Sr-deficiency of the materials. The analysis of the anisotropic displacement parameters (ADPs) indicates a strong softening of the overall phonon modes for these samples, which is confirmed by the extremely low thermal conductivity value (κ ≈ 1.6 W m-1 K−1 at 823 K) found for Sr1−xTi0.9Nb0.1O3−δ (x = 0.1, 0.2). This approach of introducing A-site cation vacancies for decreasing the thermal conductivity seems more effective than the classical substitution of strontium by rare-earth elements in SrTiO3 and opens a new optimization scheme for the thermoelectric properties of oxides., This research was funded by the Spanish Ministry of Economy and Competitivity, grant numbers MAT2017-84496-R and MAT2017-87134-C2-2-R; the Community of Madrid and Complutense University of Madrid, grant number PR65/19-22459, ANPCyT; and UNSL, under grant numbers PICT2014-3576 and PROICO 2-2016., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dehydration of fructose to HMF in presence of (H3O)xSbxTe(2-x)O6 (x = 1, 1.1, 1.25) in H2O-MIBK

  • Mayer, Sergio F.
  • Falcon, Horacio
  • Dipaola, R.
  • Ribota, P.
  • Moyano, L.
  • Morales-delaRosa, Silvia
  • Mariscal López, Rafael
  • Campos Martín, José Miguel
  • Alonso, J. A.
  • García Fierro, José Luis
[EN] The pyrochlores (HO)SbTeO (x = 1, 1.1 and 1.25) obtained by ion exchange from KSbTeO oxides were used as catalysts for the conversion of fructose to 5-hydroxymethylfurfural (HMF) in HO/Methyl isobutyl ketone (MIBK). The structure of the resulting compounds as well as the location of the HO units inside the three-dimensional network, were determined by XRD from powder samples. The effect of factors such as reaction time and temperature on the formation of HMF was studied. A fructose conversion of 99% and a yield of 59% were achieved after 120 min of reaction time and at 150 °C temperature. The percentage of substitution of the cations Sb and Te in the position B of the pyrochlore was determinant to achieve the maximum incorporation of HO ions in the pyrochlore structure, which allowed to correlate the density of acidic sites present in the materials and their catalytic activity., The authors acknowledge financial support from Comunidad de Madrid(Spain) (RESTOENE-2-CMS2013/MAE-2882project) and CSIC(Spain) (201880E029 project). The financial support of Spanish MINECO to the project MAT2017-84496-R
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct transformation of crystalline MoO3 into few-layers MoS2

  • Carrascoso Plana, Félix
  • Sanchez-Santolino, Gabriel
  • Hsu, Chun-wei
  • Nemes, N. M.
  • Torres-Pardo, Almudena
  • Gant, Patricia
  • Mompean, Federico J.
  • Kalantar-Zadeh, Kourosh
  • Alonso, J. A.
  • García-Hernández, Mar
  • Frisenda, Riccardo
  • Castellanos-Gómez, Andrés
We fabricated large-area atomically thin MoS2 layers through the direct transformation of crystalline molybdenum trioxide (MoO3) by sulfurization at relatively low temperatures. The obtained MoS2 sheets are polycrystalline (~10–20 nm single-crystal domain size) with areas of up to 300 × 300 µm2, 2–4 layers in thickness and show a marked p-type behavior. The synthesized films are characterized by a combination of complementary techniques: Raman spectroscopy, X-ray diffraction, transmission electron microscopy and electronic transport measurements., ACG acknowledge funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement n° 755655, ERC-StG 2017 project 2D-TOPSENSE) and from the EU Graphene Flagship funding (Grant Graphene Core 2, 785219). JAA thanks the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) for funding the project MAT2017-84496-R. RF acknowledges support from MINECO through a “Juan de la Cierva: formación” fellowship (2017 FJCI-2017-32919). GSS acknowledges financial support from MINECO (Juan de la Cierva 2015 program, FJCI-2015-25427)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revisiting the crystal structure of BaCe0.4Zr0.4Y0.2O3−δ proton conducting perovskite and its correlation with transport properties

  • Basbus, Juan F.
  • Arce, Mauricio D.
  • Napolitano, Federico R.
  • Troiani, Horacio E.
  • Alonso, J. A.
  • Saleta, Martín E.
  • González, Miguel A.
  • Cuello, G. J.
  • Fernández-Díaz, M. T.
  • Pardo Sainz, Miguel
  • Bonanos, Nikolaos
  • Jimenez, Catalina E.
  • Giebeler, Lars
  • Figueroa, Santiago J. A.
  • Caneiro, Alberto
  • Serquis, Adriana C.
  • Mogni, Liliana V.
Oxides with proton conductivity have a great potential for applications in environmental energy technology. Despite the BaCe0.4Zr0.4Y0.2O3−δ (BCZY) perovskites being well-known proton conductors, it is a challenge to determine the optimal operating temperature range where the energy applications benefit most from this unique property. The protonic transport properties strongly depend on crystal structure and local distortions in the participating cation coordination sphere, according to related temperatures and gas feed. The transport and crystallographic properties of BCZY were simultaneously studied by impedance spectroscopy (IS) and synchrotron X-ray diffraction (S-XRD). A strong correlation between conductivity and the lattice parameter, corresponding in principle to a cubic symmetry, was observed, mainly between 400 and 700 °C. The protonic conductivity range was analyzed by the H/D isotopic effect on the impedance spectra, which helped to identify protonic conduction as the governing transport mechanism below 600 °C, while the transport via oxygen vacancies dominates above this temperature. In order to assess the real crystallographic structure, the simultaneous refinement of laboratory XRD and neutron diffraction (ND) patterns was performed. According to this, BCZY changes from rhombohedral symmetry below 400 °C to cubic at 600 °C in a second-order phase transition. Complementary quasielastic neutron scattering (QENS) enables us to determine a protonic jump length of 3.1 Å, which matches the O–O distances in the octahedral oxygen coordination sphere around the cations. These results support the protonic self-diffusion through proton hopping between intraoctahedral O sites as the main transport mechanism up to 600 °C., This work was supported by Agencia Nacional de Promocion de Ciencia y Tecnologia (ANPCyT) PICT-2016-2965 and PICT2014-1849, CONICET PIP-2015-0565, LNLS (Brazil), under proposals 20150099 and 20170278, and ILL (France) under proposal 7-03-168. L. Giebeler is grateful to the German Federal Ministry of Education and Research (BMBF) and the Argentinian Ministry of Science and Technology (MinCyT) for funding in the bilateral project DeFLeST (01DN14002). J. A. Alonso thanks the Spanish Ministry for Science, Innovation and Universities for funding the Project MAT2017-84496-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure-properties relationship in the hydronium-containing pyrochlores (H3O)1+pSb1+pTe1-pO6 with catalytic activity in the fructose dehydration reaction.

  • Mayer, Sergio F.
  • Falcon, Horacio
  • Fernández-Díaz, M. T.
  • Campos Martín, José Miguel
  • Alonso, J. A.
A series of defect pyrochlores of the composition (H3O)1+pSb1+pTe1-pO6 have been prepared by ion exchange from K-containing pyrochlores K1+pSb1+pTe1-pO6 in sulfuric acid at 280 °C for 24 h. The structural characterization of the hydronium-containing pyrochlores, including the location of the H3O+ units within the three-dimensional framework, was possible from neutron powder diffraction data in undeuterated samples. The crystal structure for all the compounds is defined in the Fd3[combining macron]m space group, and consists of a covalent framework of SbVO6 and TeVIO6 octahedra distributed at random and connected by their vertices with (Sb,Te)-O1-(Sb,Te) angles close to 136°, conforming to large cages where the hydronium species are located off-center. The absence of K+ ions in the ion-exchanged pyrochlores was confirmed by inductively coupled plasma optical emission spectroscopy and scanning electron microscopy coupled with energy dispersive X-ray spectroscopy. The shape and size of the hydronium units evolve along with the series, becoming more compact as the framework covalence and Lewis-basicity decrease upon Sb enrichment of the structure (for greater p values). The amount and lability of the H3O+ species also increase throughout the series, as wanted: a straightforward correlation of the catalytic activity in the fructose dehydration reaction to 5-hydroxymethylfurfural has been observed, reaching conversion rates up to 88.5% of concentrated fructose solution for the p = 0.25 catalyst. Moreover, a pseudo-first-order kinetic mechanism was simulated, and the kinetic constants obtained from diluted and concentrated enhanced reaction systems were determined and compared., This work was supported by the Spanish Ministry of Economy and Competitivity through grants MAT2017-84496-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crystal structure features of CH3NH3PbI3-: XBrx hybrid perovskites prepared by ball milling: A route to more stable materials

  • López, Carlos Alberto
  • Álvarez Galván, María Consuelo
  • Martínez Huerta, M. Victoria
  • Fauth, François
  • Alonso, J. A.
Hybrid organic-inorganic perovskites, MAPbX (MA: methylammonium, CH-NH; X = halogen), are active absorption materials in the new generation of solar cells. The triiodide specimen (MAPbI) remains the most widely studied perovskite due to its ability to absorb broadband light below its band gap of 1.6 eV, but its degradation in a humid atmosphere has remained a major obstacle for commercialization. Here we found that CHNHPbIBr (x = 0.0, 1.0) perovskites, prepared by ball milling, exhibit superior stability, showing no signs of degradation after several months of exposure to humid air. A synchrotron X-ray diffraction (SXRD) investigation was useful to determine some peculiar structural features that may account for the improved stability. The crystal structure was analysed to be in the I4/mcm and acentric I4cm space groups, yielding similar agreement factors. In both, the inorganic framework presents a conspicuously lower tilting effect than that observed in samples prepared by wet methods; an additional difference arises since the tetragonal structure is stable down to 140 K. The orientation of the organic MA units may play an important role in the properties, given the degrees of freedom for internal motion of MA groups within the PbX network. From the refined C/N positions, the MA units lie along the c axis with 25% probability. The structure at 140 K shows that the MA contribution along the c axis vanishes at this temperature. By contrast, MAPbIBr crystallizes in the cubic phase with the space group Pm3m, also with a larger unit-cell volume than that previously described. The absence of phase transitions down to 120 K suggests that the anion disorder prevents the localization of MA units upon cooling., The authors acknowledge the financial support given by the Spanish Ministry of Economy and Competitiveness (MAT2017-84496-R) and KIC RAW MATERIALS from the European Union (OPTNEWOPT project). C. A. L. acknowledges ANPCyT and UNSL, Argentina, for the financial support (projects PICT2017-1842 and PROICO 2-2016, respectively), We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Substantial thermal conductivity reduction in mischmetal skutterudites MmxCo4Sb12 prepared under high-pressure conditions, due to uneven distribution of the rare-earth elements

  • Gainza, Javier
  • Serrano-Sánchez, Federico
  • Prado-Gonjal, Jesús
  • Nemes, N. M.
  • Biskup, N.
  • Dura, Oscar J.
  • Martínez, José L.
  • Fauth, François
  • Alonso, J. A.
Thermoelectric mischmetal-filled MmxCo4Sb12 (Mm: natural cocktail of rare-earth elements, mostly Ce and La) skutterudites have been synthesized and sintered in one step under high-pressure conditions at 3.5 GPa in a piston–cylinder hydrostatic press. Synchrotron X-ray diffraction patterns display a splitting of the diffraction peaks ascribed to purely Ce-, and Mm-filled skutterudite phases, which have been analyzed and confirmed by high-resolution TEM and EELS. A total thermal conductivity (κ) of 1.51 W m−1 K−1 is measured at 773 K for Mm0.5Co4Sb12, below that of other filled skutterudites, which is promoted by the enhanced phonon scattering over a broad range of the phonon spectrum due to the inhomogeneous and nanoscale mischmetal inclusion. Compared to undoped CoSb3 skutterudite synthesized by conventional methods, κ is reduced by a factor of 3, while the power factor is also substantially enhanced., This work was supported by the Spanish Ministry of Science, Innovation and Universities through grants MAT2017-84496-R, MAT2017-87134-C2-2-R and MAT2015-66888-C3-3-R co financed by FEDER. JPG would also like to thank this Ministry for granting a “Juan de la Cierva” fellowship and to Community of Madrid for granting an “Atracción de Talento” fellowship (2017-T2/I ND-5597). Financial support from the ERC grant PoC2015-MAGTOOLS is also acknowledged. The authors wish to express their gratitude to ALBA technical staff for making the facilities available for the synchrotron X-ray diffraction experiment number 2017072260. Transmission electron microscopy studies were performed at the ICTS ELECMI node at Centro Nacional de Microscopía Electrónica (CNME) at the Universidad Complutense de Madrid (UCM)., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A comprehensive examination of the local- and long-range structure of Sb6O13 pyrochlore oxide

  • Mayer, Sergio F.
  • Rodrigues, J. E.
  • Marini, C.
  • Fernández-Díaz, M. T.
  • Falcon, Horacio
  • Asensio, María C.
  • Alonso, J. A.
The crystal structure of the SbO oxide, exhibiting a defect pyrochlore crystal structure with atomic vacancies, has been studied using a complete set of state-of-the-art techniques. The degree of antimony disproportionation in Sb and Sb valence states has been directly determined around 36% and 64%, respectively, using X-ray absorption near edge structure (XANES). These findings are in excellent agreement with our Rietveld analysis of synchrotron X-ray (SXRD) and neutron powder diffraction (NPD) results. Moreover, the highly distorted Sb coordination due to its lone electron pair has been critically revisited. The bonding distances and coordination of Sb and Sb species closely agree with an extensive dynamic and crystallographic determination using the Extended X-ray Absorption Fine Structure (EXAFS) technique. Most importantly, the specific local disorder of the two distinctive Sb ions has been crosschecked monitoring their unusual Debye–Waller factors., We are grateful to the Spanish Ministry of Economy and Competitivity for granting the project MAT2017- 84496-R, and ILL for making all the facilities available for the neutron diffraction experiments. J.E.R.acknowledges the CAPES agency (Finance Code 001: 88881.171031/2018-01). M.C.A. is greatly ended also to “MATINÉE”, the Associated Unit created by CSIC between the Materials Science Institute of Madrid (ICMM) and the Valencia Institute of Materials Science (ICMUV), Valencia University & CSIC.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Probing the tunability of magnetism with external pressure in metastable Sr2NiIrO6 double perovskite

  • Laguna-Marco, M. A.
  • Arias-Egido, Eduardo
  • Cuartero, Vera
  • Herrero-Albillos, Julia
  • Kayser, P.
  • Alonso, J. A.
  • Fabbris, Gilberto
  • Haskel, D.
  • Irifune, Tetsuo
In Sr2NiIrO6 long-range Ir-Ir antiferromagnetic exchange interactions have been reported to overcome the ferromagnetic Ni-Ir interactions hampering the otherwise expected ferromagnetic behavior. Prompted by this, a combination of x-ray absorption spectroscopy and x-ray diffraction at high pressure is used here to investigate the interplay between the magnetic structure of the Ir sublattice and lattice degrees of freedom. The compression of Sr2NiIrO6 drives an unexpected nonmonotonic change of the x-ray magnetic circular dichroism (XMCD) spectra: The intensity first decreases in the 0- to 18-GPa range, then shows an increase in the 18- to 30-GPa range and again decreases for higher pressures. The XMCD intensity, a measure of the net magnetization in the Ir sublattice, however, is found to remain very low in the whole pressure range so the observed changes do not correspond with a transition from antiferromagnetic to ferromagnetic or ferrimagnetic order. The evolution of the XMCD is better explained in terms of a weakening/strengthening of the long-range antiferromagnetic (AFM) Ir-Ir interaction between ferromagnetic planes associated with the reduction of the lattice parameters. In particular, a correlation can be established between the evolution of the b/a ratio and the weakening/strengthening of the AFM interaction., This work was supported by Spanish MINECO Projects No. MAT2014-54425-R (AEI/FEDER, UE), No. MAT201783468-R (AEI/FEDER, UE), and No. MAT2017-84496R (AEI/FEDER, UE), MICINN Project No. PID2020115159GB-I00/AEI/10.13039/501100011033, and the regional Government of Aragon (Grant No. E12-20R RASMIA). E.A.-E. acknowledges the Spanish MINECO and the European Social Fund for a FPI (Formación de Personal Investigador, 2015) grant. This research used resources of the APS, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Argonne National Laboratory under Contract No. DEAC02-06CH11357., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combining Raman spectroscopy and synchrotron X-ray diffraction to unveil the order types in A3CaNb2O9 (A = Ba, Sr) complex perovskites

  • Rodrigues, J. E.
  • Costa, Renilton C.
  • Pizani, Paulo S.
  • Hernandes, Antonio C.
  • Alonso, J. A.
[EN] The structural ordering process in complex perovskites has a pivotal role for tuning many physical properties for broad applications, ranging from microwave technology, proton-conduction, multiferroicity, and so on. Therefore, the characterization of order type in these materials is essential for designing new devices with high-performance. Here, the coexistence of B-site 1:1 and 1:2 order types in mixed ordered ACaNbO (A = Ba, Sr) perovskite was investigated by combining Raman spectroscopy and high-resolution synchrotron X-ray powder diffraction. High-wavenumber interval 700–825 cm exhibits two bands concerning the symmetric breathing modes of [NbO] octahedra in ACaNbO, which were ascribed to the 1:1 and 1:2 domain regions in coexistence. This model was fully corroborated using two phases for describing the synchrotron X-ray pattern of the BaCaNbO sample. Therefore, the Raman spectroscopy can be indeed applied as a rapid tool for probing the achievement of ordered, partially ordered, or disordered structures in complex perovskites. For the first time, BaLaCaNbO was synthesized and structural characterized, being indexed by the monoclinic unit cell belonging to the space group (Formula presented.)., Ministerio de Ciencia e Innovación, Grant/Award Number: MAT2017-84496-R; Spanish Ministry of Science, Innovation, and Universities; FAPESP, Grant/Award Number: 13/07793-6
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic Properties of Efficient Catalysts Based on La-Doped Ceria-Supported Nickel Nanoparticles for rWGS Reaction. Influence of Ni Loading

  • Álvarez Galván, María Consuelo
  • Martínez, José L.
  • Capel Sánchez, María del Carmen
  • Pascual, Laura
  • Alonso, J. A.
[EN] The influence of Ni loading on CeLaO-supported Ni catalysts for CO reduction with hydrogen (reverse water gas shift reaction) is studied. The samples are prepared by solution combustion synthesis (SCS), leading to materials with high thermal resistance, purity, and crystallinity, consisting of metallic nickel nanoparticles supported on La-doped ceria. The study of the ferromagnetic Curie temperature (T) and magnetization cycles suggest that the Ni nanoparticles are superparamagnetic, exhibiting magnetic order at room temperature, with T strongly dependent on the particle size; this spans from 1.9, up to 80 nm. The structural study from synchrotron X-ray diffraction data and Raman spectroscopy clearly show the presence of oxygen vacancies in the fluorite crystal structure of the CeLaO matrix, which increase in the spent catalysts by forming a greater proportion of Ce compared with their fresh counterparts. This is confirmed from the Raman spectra, showing an increase in the relative intensity of the band placed between 520 and 610 cm. All the catalysts show very high reaction rate per unit mass of catalyst; the CO conversion after 6 h for the catalyst with 10% Ni molar (Ni/CeLa) is 57% (2.4 moles CO·h·g catalyst), very close to the thermodynamic equilibrium (59.3%)., Financial support given by the Spanish Ministry of Economy and Competitiveness (ENE2016-74889-C4-3-R). J.A.A. and J.L.M. acknowledge financial support given by the Spanish Ministry of Economy and Competitiveness (MAT2017-84496-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nitridation effect on lithium iron phosphate cathode for rechargeable batteries

  • Mayer, Sergio F.
  • Calle, Cristina de la
  • Fernández-Díaz, María Teresa
  • Amarilla, José Manuel
  • Alonso, J. A.
A novel oxynitride Li0.94FePO3.84N0.16 with olivine structure (space group Pnma, no. 62) has been synthesized by heating a parent LiFePO4 precursor obtained by citrate chemistry in flowing ammonia at 650 °C. The polycrystalline sample has been characterized by X-ray and neutron powder diffraction (NPD), elemental and thermal analysis, scanning electron microscopy (SEM) and electrochemical measurements. Based on the existing contrast between the scattering lengths of the N and O species, a Rietveld refinement of the structure from NPD data revealed that N preferentially occupies the O2 positions, as likely required to fulfil the bonding power of N ions. The refined crystallographic formula implies an oxidation state of 2.2+ for Fe cations. The differential thermal analysis, in still air, shows a strong exothermic peak at 520-540 °C due to the combustion of C contents, which are embedding the olivine particles, as observed by SEM. The electrochemical measurements suggest a better performance for the nitrided sample relative to the unnitrided LiFePO4 material, as far as capacity and cyclability are concerned. A bond-valence energy landscape study reveals a decrease in the percolation activation energy of about 6% upon nitridation, concomitant with the better electrochemical properties of the oxynitride compound. Additionally, ceramic samples prepared under NH3 flow could be obtained as pure and well-crystallized olivine phases at milder temperatures (650 °C) than those usually described in literature., The authors wish to thank the Institute Laue Langevin, Grenoble (France) for making facilities available and the microscopy service of SIDI (UAM, Universidad Autónoma de Madrid) for the kind technical assistance. Financial resources were provided by the Spanish Ministry of Science and Innovation (MAT2017-84496-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced ferromagnetism in monolayer Cr2Te3 via topological insulator coupling

  • Ou, Y.
  • Mirzhalilov, M.
  • Nemes, N.M.
  • Martínez, José L.
  • Rocci, M.
  • Duong, A.
  • Akey, A.
  • Foucher, A.C.
  • Ge, W.
  • Suri, D.
  • Wang, Y.
  • Ambaye, H.
  • Keum, J.
  • Randeria, M.
  • Trivedi, N.
  • Burch, K.S.
  • Bell, D.C.
  • Ross, F.M.
  • Wu, W.
  • Heiman, D.
  • Lauter, V.
  • Moodera, J.S.
  • Chi, H.
Exchange-coupled interfaces are pivotal in exploiting two-dimensional (2D) ferromagnetism. Due to the extraordinary correlations among charge, spin, orbital and lattice degrees of freedom, layered magnetic transition metal chalcogenides (TMCs) bode well for exotic topological phenomena. Here we report the realization of wafer-scale Cr2Te3 down to monolayer (ML) on insulating SrTiO3(111) and/or Al2O3(001) substrates using molecular beam epitaxy. Robust ferromagnetism persists in the 2D limit. In particular, the Curie temperature TC of 2 ML Cr2Te3 increases from 100 K to ∼120 K when proximitized to topological insulator (TI) (Bi,Sb)2Te3, with substantially boosted magnetization as observed via polarized neutron reflectometry. Our experiments and theory strongly indicate that the Bloembergen-Rowland interaction is likely universal underlying TC enhancement in TI-coupled magnetic heterostructures. The topological-surface-enhanced magnetism in 2D TMC enables further exchange coupling physics and quantum hybrid studies, including paving the way to realize interface-modulated topological electronics. © 2025 The Author(s). Published by IOP Publishing Ltd., This work was supported by Army Research Office (ARO W911NF-20-2-0061), the National Science Foundation (NSF-DMR 2218550), Office of Naval Research (N00014-20-1-2306). H C acknowledges support of the Canada Research Chairs (CRC) Program, and the Natural Sciences and Engineering Research Council of Canada (NSERC), Discovery Grant RGPIN-2024-06497 and ALLRP 592642-2024. Y O, D S, J S M and D C B thank the Center for Integrated Quantum Materials (NSF-DMR 1231319) for financial support. This work made use of the MIT Materials Research Laboratory. D H thanks support from NSF-DMR 1905662 and the Air Force Office of Scientific Research Award No. FA9550-20-1-0247. N M N and J L M were supported by Ministerio de Ciencia e Innovacion, Spain, with Grant Numbers MAT2017-84496-R, PID2021-122477OB-I00, TED2021-129254B-C21 and TED2021-129254B-C22. M R received funding from the European Union Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie Grant Agreement EuSuper No. 796603. The STEM work was performed in part at the Center for Nanoscale Systems (CNS), a member of the National Nanotechnology Coordinated Infrastructure Network (NNCI), which is supported by NSF Award No. 1541959. A C F is supported by the MIT-IBM Watson AI Lab. This work was carried out in part through the use of MIT.nano’s facilities. The MFM studies at Rutgers were supported by the Office of Basic Energy Sciences, Division of Materials Sciences and Engineering, U.S. Department of Energy under Award No. DE-SC0018153. The Raman measurements of Y W and K S B were performed with support from the Air Force Office of Scientific Research under Award No. FA9550-24-1-011. This research used resources at the Spallation Neutron Source, a Department of Energy Office of Science User Facility operated by the Oak Ridge National Laboratory (ORNL). Neutron reflectometry measurements, beamtime proposal IPTS-24447, were carried out on the Magnetism Reflectometer at the SNS, which is sponsored by the Scientific User Facilities Division, Office of Basic Energy Sciences, DOE. XRR measurements were conducted at the CNMS at ORNL, which is a DOE Office of Science User Facility. M M, M Ra and N T were supported by the NSF Materials Research Science and Engineering Center Grant No. DMR-2011876. N T thanks K Lee for discussions. Notice: This manuscript has been authored by UT-Battelle, LLC under Contract No. DE-AC05-00OR22725 with the U.S. Department of Energy. The United States Government retains and the publisher, by accepting the article for publication, acknowledges that the United States Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce the published form of this manuscript, or allow others to do so, for United States Government purposes. The Department of Energy will provide public access to these results of federally sponsored research in accordance with the DOE Public Access Plan, Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Enhanced stability in CH_3NH_3PbI_3 hybrid perovskite from mechano-chemical synthesis: structural, microstructural and optoelectronic characterization

  • López, Carlos A.
  • Abia, Carmen
  • Rodrigues, Joao E.
  • Serrano Sánchez, Federico
  • Nemes, Norbert Marcel
  • Martínez, José L.
  • Fernández Díaz, Maria T.
  • Biskup Zaja, Nevenko
  • Álvarez Galván, Consuelo
  • Carrascoso, Felix
  • Castellanos Gómez, Andres
  • Alonso, Jose A.
Among the hybrid organic-inorganic perovskites MAPbX(3) (MA: methyl-ammonium CH3-NH3+, X=halogen), the triiodide specimen (MAPbI(3)) is still the material of choice for solar energy applications. Although it is able to absorb light above its 1.6 eV bandgap, its poor stability in humid air atmosphere has been a major drawback for its use in solar cells. However, we discovered that this perovskite can be prepared by ball milling in a straightforward way, yielding specimens with a superior stability. This fact allowed us to take atomic-resolution STEM images for the first time, with sufficient quality to unveil microscopic aspects of this material. We demonstrated full Iodine content, which might be related to the enhanced stability, in a more compact PbI6 framework with reduced unit-cell volume. A structural investigation from neutron powder diffraction (NPD) data of an undeuterated specimen was essential to determine the configuration of the organic MA unit in the 100-298 K temperature range. A phase transition is identified, from the tetragonal structure observed at RT (space group I4/mcm) to an orthorhombic (space group Pnma) phase where the methyl-ammonium organic units are fully localized. Our NPD data reveal that the MA changes are gradual and start before reaching the phase transition. Optoelectronic measurements yield a photocurrent peak at an illumination wavelength of 820 nm, which is redshifted by 30 nm with respect to previously reported measurements on MAPbI(3) perovskites synthesized by crystallization from organic solvents.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Evidence of nanostructuring and reduced thermal conductivity in n-type Sb-alloyed SnSe thermoelectric polycrystals

  • Gainza, Javier
  • Serrano Sánchez, Federico
  • Gharsallah, M.
  • Carrascoso, Felix
  • Bermudez, J.
  • Dura, Oscar Juan
  • Mompean, Federico
  • Biskup Zaja, Nevenko
  • Melendez, Juan José
  • Martinez, José
  • Alonso, José Antonio
  • Nemes, Norbert Marcel
SnSe has been recently reported as an attractive thermoelectric material, with an extraordinarily high, positive, Seebeck coefficient. Here, we describe the synthesis, structural, microscopic, and thermoelectric characterization of Sn1–xSbxSe intermetallic alloys prepared by a straightforward arc-melting technique. Sb-doped tin selenide was synthesized as strongly nanostructured polycrystalline pellets. Neutron diffraction studies reveal that Sb is placed at the Sn sublattice in the crystal structure, showing concentrations as high as 30%, and generates a significant number of Sn vacancies, while the increase of the interlayer distances favors the nanostructuration. The material is nanostructured both out-of-plane in nanometer-scale layers and in-plane by ∼5 nm undulations of these layers. This nanostructuring, along with an increased amount of Sn vacancies, accounts for a reduction of the thermal conductivity, which is highly desirable for thermoelectric materials. The phonon mean free path is estimated to be on the order of 2 nm from low temperature, thermal conductivity, and specific heat, in accordance with the nanostructuration observed by high-resolution transmission electron microscopy. The thermal conductivity of SnSe is characterized by three independent techniques to assure a room temperature value of Sn0.8Sb0.2Se of κ ∼ 0.6 W/m K. The freshly prepared Sb-doped compounds exhibit an abrupt change in the type of charge carriers, leading to large, negative Seebeck coefficients, although the arc-melt synthesized pellets remain too resistive for thermoelectric applications. Cold-pressed pellets evolve to be p-type at room temperature, but reproducibly turn n-type around 500 K, with increased electrical conductivity and maximum observed figure of merit, ZT ∼ 0.3 at 908 K.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Thermal conductivity reduction by fluctuation of the filling fraction in filled cobalt antimonide skutterudite thermoelectrics

  • Serrano Sánchez, F.
  • Prado Gonjal, Jesús de la Paz
  • Nemes, Norbert Marcel
  • Biskup Zaja, Nevenko
  • Dura, O. J.
  • Martinez, J. L.
  • Fernandez Diaz, M. T.
  • Fauth, F.
  • Alonso, J. A.
The reduction of the lattice thermal conductivity is one of the crucial steps in improving thermoelectric materials. In skutterudites, a well-known approach is to reduce the thermal conductivity by filling the structural cage with rare-earth atoms. In this work, we show that it is not just the amount of such filling itself but its nanoscale structuration that lowers the thermal conductivity. A straightforward synthesis procedure under high pressure yields Ce- and Yb-filled CoSb3 skutterudites, with and without an inhomogeneous distribution of the filler atoms. The composition of the phases is evaluated from synchrotron Xray diffraction (SXRD) data; the highly nanostructured morphology is verified by high-resolution transmission electron microscopy (TEM). The filling fluctuation, i.e., the uneven distribution of filling atoms in the sample originating a phase segregation, brings about low lattice thermal conductivity, as a strong source of phonon scattering. This effect is prominent in the Ce-filled compound, where Ce is segregated into Ce-rich and Ce-poor regions, and the lattice contribution of the thermal conductivity kappa(L), shows a concomitant reduction, approaching values as low as 1.6 W m(-1) K-1 at 800 K. Although the level of filling is much higher in YbxCoSb3, its lattice thermal conductivity remains larger. Overall, though, its power factor is enhanced due to charge transfer from the Yb-filler. We thus define a new paradigm for the design of filled skutterudites with exceptionally low thermal conductivities, based on the nanoscale mixing of two phases with different filling factors, spontaneously induced by high-pressure synthesis conditions, which can be considered as pseudoamorphous structures with significant reduction in kappa(L).
Docta Complutense
Publicación Artículo científico (JournalArticle)

Structural features, anisotropic thermal expansion, and thermoelectric performance in bulk black phosphorus synthesized under high pressure

  • Rodrigues, João Elias F. S.
  • Gainza, Javier
  • Serrano Sanchez, Federico
  • Lopez, Carlos
  • Dura, Oscar J.
  • Nemes, Norbert Marcel
  • Martinez, Jose L.
  • Huttel, Yves
  • Fauth, Francois
  • Fernandez Diaz, Maria Teresa
  • Biskup Zaja, Nevenko
  • Alonso, José Antonio
Black phosphorus (BP) allotrope has an orthorhombic crystal structure with a narrow bandgap of 0.35 eV. This material is promising for 2D technology since it can be exfoliated down to one single layer: the well-known phosphorene. In this work, bulk BP was synthesized under high-pressure conditions at high temperatures. A detailed structural investigation using neutron and synchrotron X-ray diffraction revealed the occurrence of anisotropic strain effects on the BP lattice; the combination of both sets of diffraction data allowed visualization of the lone electron pair 3s(2). Temperature-dependent neutron diffraction data collected at low temperature showed that the a axis (zigzag) exhibits a quasi-temperature-independent thermal expansion in the temperature interval from 20 up to 150 K. These results may be a key to address the anomalous behavior in electrical resistivity near 150 K. Thermoelectric properties were also provided; low thermal conductivity from 14 down to 6 Wm(-1) K-1 in the range 323-673 K was recorded in our polycrystalline BP, which is below the reported values for single-crystals in literature.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Substantial thermal conductivity reduction in mischmetal skutterudites Mm_xCo_4Sb_12 prepared under high-pressure conditions, due to uneven distribution of the rare-earth elements

  • Gainza, Javier
  • Serrano Sánchez, F.
  • Prado Gonjal, Jesús de la Paz
  • Nemes, Norbert Marcel
  • Biskup Zaja, Nevenko
  • Dura, O.J.
  • Martínez, J.L.
  • Fauth, F.
  • Alonso, J.A.
Thermoelectric mischmetal-filled Mm(x)Co(4)Sb(12) (Mm: natural cocktail of rare-earth elements, mostly Ce and La) skutterudites have been synthesized and sintered in one step under high-pressure conditions at 3.5 GPa in a piston-cylinder hydrostatic press. Synchrotron X-ray diffraction patterns display a splitting of the diffraction peaks ascribed to purely Ce-, and Mm-filled skutterudite phases, which have been analyzed and confirmed by high-resolution TEM and EELS. A total thermal conductivity () of 1.51 W m(-1) K-1 is measured at 773 K for Mm(0.5)Co(4)Sb(12), below that of other filled skutterudites, which is promoted by the enhanced phonon scattering over a broad range of the phonon spectrum due to the inhomogeneous and nanoscale mischmetal inclusion. Compared to undoped CoSb3 skutterudite synthesized by conventional methods, is reduced by a factor of 3, while the power factor is also substantially enhanced.