Pasar al contenido principal

OPTIMIZACION DE PROPIEDADES ELECTRONICAS DE DISPOSITIVOS DE INTERFASE: SPIN-ORBITRONICA Y SPIN-MEMRISTORES

MAT2014-52405-C2-2-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-quality PVD graphene growth by fullerene decomposition on Cu foils

  • Azpeitia-Urkia, Jon
  • Otero, Gonzalo
  • Palacio, Irene
  • Martínez, José I.
  • Ruiz del Árbol, Nerea
  • Santoro, Gonzalo
  • Gutiérrez-Delgado, Alejandro
  • Aballe, Lucía
  • Foerster, Michael
  • Kalbáč, Martin
  • Vales, V.
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Martín-Gago, José A.
  • Munuera, C.
  • López, María Francisca
We present a new protocol to grow large-area, high-quality single-layer graphene on Cu foils at relatively low temperatures. We use C60 molecules evaporated in ultra high vacuum conditions as carbon source. This clean environment results in a strong reduction of oxygen-containing groups as depicted by X-ray photoelectron spectroscopy (XPS). Unzipping of C60 is thermally promoted by annealing the substrate at 800 °C during evaporation. The graphene layer extends over areas larger than the Cu crystallite size, although it is changing its orientation with respect to the surface in the wrinkles and grain boundaries, producing a modulated ring in the low energy electron diffraction (LEED) pattern. This protocol is a self-limiting process leading exclusively to one single graphene layer. Raman spectroscopy confirms the high quality of the grown graphene. This layer exhibits an unperturbed Dirac-cone with a clear n-doping of 0.77 eV, which is caused by the interaction between graphene and substrate. Density functional theory (DFT) calculations show that this interaction can be induced by a coupling between graphene and substrate at specific points of the structure leading to a local sp3 configuration, which also contribute to the D-band in the Raman spectra., Financial support from EU Horizon 2020 research and innovation program under grant agreement No. 696656 (GrapheneCore1-Graphene-based disruptive technologies) and Spanish MINECO (grants MAT2014-54231-C4-1-P,MAT2014-52405-C2-2-R, CSD2009-00013, MAT2015-64110) is acknowledged. JA and NR are supported by the FPI program from MINECO (BES-2012-058600 and BES-2015-072642, respectively). CM and JIM acknowledge the financial support by the “Ramón y Cajal” Program of MINECO (RYC-2014-16626 and RYC-2015-17730, respectively). JIM and GS acknowledge funding from the ERC-Synergy Program (grant ERC-2013-SYG-610256 Nanocosmos). JIM thanks CTI-CSIC for use of computing resources. MK and VV acknowledge funding from ERC-CZ (LL1301) project. GO-I acknowledges FCT for his grant (SFRH/BPD/90562/2012)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural characterization of as-grown and quasi-free standing graphene layers on SiC

  • Aceituno Bueno, Rebeca
  • Palacio, Irene
  • Munuera, C.
  • Aballe, Lucía
  • Foerster, Michael
  • Strupinski, Wlodek
  • García-Hernández, Mar
  • Martín-Gago, José A.
  • López, María Francisca
We report on a comparative structural characterization of two types of high quality epitaxial graphene layers grown by CVD on 4H-SiC(0001). The layers under study are a single layer graphene on top of a buffer layer and a quasi-free-standing graphene obtained by intercalation of hydrogen underneath the buffer layer. We determine the morphology and structure of both layers by different complementary in-situ and ex-situ surface techniques. We found the existence of large islands in both samples but with different size distribution. Photoemission electron microscopy (PEEM) measurements were performed to get information about the chemical environment of the different regions. The study reveals that monolayer graphene prevails in most of the surface terraces, while a bilayer and trilayer graphene presence is observed at the steps, stripes along steps and islands., Financial support from EU Horizon 2020 research and innovation program under grant agreement No. 785219 (Graphene Flagship Core2-Graphene-based disruptive technologies) and Spanish MINECO (grants MAT2017-85089-C2-1-R, MAT2014-52405-C2-2-R, RYC-2014-16626) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In situ generation of 3D graphene-like networks from cellulose nanofibres in sintered ceramics

  • Kocjan, Andraž
  • Schmidt, Rainer
  • Lazar, Ana
  • Prado-Gonjal, Jesús
  • Kovač, Janez
  • Logar, Manca
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Ruiz-Hitzky, Eduardo
  • Wicklein, Bernd
Establishing a 3D electrically percolating network in an insulating matrix is key to numerous engineering and functional applications. To this end, using hydrophobic carbon nanofillers is tempting, but still results in suboptimal performance due to processing challenges. Here, we demonstrate how natural cellulose nanofibres can be in situ transformed into graphene-like sheets connected to a 3D network enhancing both the transport and the mechanical properties of sintered engineering ceramics. The network architecture also permits the decoupling of electrical and thermal conductivities, which represents a major obstacle in attaining efficient thermoelectric materials. We foresee that our transferable methodology can pave the way for the use of natural nanofibres to unravel the full potential of 3D graphene-like networks to accelerate development in fields like energy and telecommunications., Financial support from the Slovenian Research Agency (research core funding No. P2-0087) and the Spanish Ministry of Economy and Competitiveness (CYCIT, MAT2012-31759, MAT2015-71117-R, MAT2014-52405-C2-2-R) is acknowledged as well as from the EU Horizon 2020 research and innovation program under grant agreement No. 696656 (Graphene Core1-Graphene-based disruptive technologies). The authors thank Prof. Mutje and Dr Tarrés for providing CNF, D. Eterovič for photography, Dr I. Sabotin for EDM tests, A. Varela for EDX analysis, Dr Muñoz for access to a Raman microscope, Aljaž Ivekovič for assistance with illustrations, and Prof. Z. Shen for fruitful discussions. BW and JPG thank the Spanish MINECO for granting Juan de la Cierva fellowships (IJCI-2015-23886, FJCI-2015-24149)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase separation enhanced magneto-electric coupling in La0.7Ca0.3MnO3/BaTiO3 ultra-thin films

  • Alberca, A.
  • Munuera, C.
  • Azpeitia-Urkia, Jon
  • Kirby, B.J.
  • Nemes, N. M.
  • Perez-Muñoz, A. M.
  • Tornos, Javier
  • Mompean, Federico J.
  • León, Carlos
  • Santamaría, Jacobo
  • García-Hernández, Mar
We study the origin of the magnetoelectric coupling in manganite films on ferroelectric substrates. We find large magnetoelectric coupling in LaCaMnO/BaTiO ultra-thin films in experiments based on the converse magnetoelectric effect. The magnetization changes by around 30-40% upon applying electric fields on the order of 1 kV/cm to the BaTiO substrate, corresponding to magnetoelectric coupling constants on the order of α = (2-5)·10 s/m. Magnetic anisotropy is also affected by the electric field induced strain, resulting in a considerable reduction of coercive fields. We compare the magnetoelectric effect in pre-poled and unpoled BaTiO substrates. Polarized neutron reflectometry reveals a two-layer behavior with a depressed magnetic layer of around 30 Å at the interface. Magnetic force microscopy (MFM) shows a granular magnetic structure of the LaCaMnO. The magnetic granularity of the LaCaMnO film and the robust magnetoelastic coupling at the LaCaMnO/BaTiO interface are at the origin of the large magnetoelectric coupling, which is enhanced by phase separation in the manganite., The authors acknowledge financial support from the Spanish MICINN and MINECO through grants MAT2011-27470-C02-01, MAT2011-27470-C02-02, MAT2014-52405-C2-2-R, MAT2014-52405-C2-1R and CSD-2009-00013.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Extra-low thermal conductivity in unfilled CoSb3-δ skutterudite synthesized under high-pressure conditions

  • Prado-Gonjal, Jesús
  • Serrano-Sánchez, Federico
  • Nemes, N. M.
  • Dura, Oscar J.
  • Martínez, J. L.
  • Fernández-Díaz, M. T.
  • Fauth, François
  • Alonso, J. A.
Thermoelectric CoSb skutterudite was synthesized and sintered in one step under high-pressure conditions at 3.5 GPa in a piston-cylinder hydrostatic press. Structural analysis carried out from synchrotron x-ray powder diffraction data reveals a significant Sb deficiency in this material. The introduction of point defects in the form of Sb vacancies distributed at random in the structure leads to an impressive reduction (>50%) of the total thermal conductivity, κ, which is one of the main ingredients of good thermoelectric materials. This suggests phonon scattering effects originated in the Sb defects, which drives to a better improvement in κ than that achieved by the conventional strategy of filling the cages of the skutterudite structure with rare earths or other heavy cations. In parallel, changes in the electronic band structure caused by point variation of the stoichiometry produce an undesired increment in the electrical resistivity. Nevertheless, the low thermal conductivity combined with a high Seebeck coefficient (-434 μV K at 500 K) originates a relatively large figure of merit (ZT = 0.12 at 550 K) for CoSb., This work was supported by the Spanish Ministry of Economy and Competitivity through Grant Nos. MAT2013-41099-R and MAT2014-52405-C2-2-R. J.P.G. would also like to thank this Ministry for granting a Juan de la Cierva fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High coercive LTP-MnBi for high temperature applications: from isolated particles to film-like structures

  • Céspedes, Eva
  • Villanueva, M.
  • Navío, C.
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Inchausti, Alexander Valeriano
  • Pedraz, P.
  • Osorio, M. R.
  • Camarero, J.
  • Bollero, A.
Ferromagnetic low-temperature phase (LTP) of manganese bismuth MnBi (at.%) alloy has been prepared by DC magnetron sputtering onto glass by alternative deposition of Bi and Mn with in-situ annealing. Modifying the temperature during deposition and/or during post-growth annealing leads to different microstructures ranging from quasi-isotropic isolated MnBi micro-particles to larger platelet-like individual ones up to highly coalesced textured film-like areas. These microstructural variations determine the magnetic behaviour, including change in the easy axis direction and possibility of varying coercivity from 4 to 16 kOe at room temperature. In all the cases, coercivity has a positive temperature coefficient, reaching 29 kOe at 500 K, being among the largest reported coercivity for MnBi. Isolated LTP-MnBi microstructures, being homogeneously distributed onto glass, have been grown while avoiding the presence of unreacted Bi regions between the MnBi structures. The possibility of tuning microstructural and magnetic properties, in combination with their time stability, makes them interesting candidates for high temperature permanent magnet applications., This research has been supported by MINECO (Ministerio de Economía y Competitividad) at IMDEA Nanociencia through ENMA-National project (MAT2014-56955-R) and at ICMM-CSIC by MAT2014-52405-C2-2-R; by MINECO through M-era.Net Programme: NEXMAG project (PCIN-2015-126); and by Regional Government (Comunidad de Madrid): NANOFRONTMAG (Ref. S2013/MIT-2850). EC acknowledges MINECO for the Formación Posdoctoral (JdC) program (FPDI-2013).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Inter-grain effects on the magnetism of M-type strontium ferrite

  • Céspedes, Eva
  • Rodriguez-Rodriguez, G.
  • Navío, C.
  • Osorio, M. R.
  • Guerrero, R.
  • Pedrosa, F. J.
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Fernández, J. F.
  • Quesada, Adrián
  • Camarero, J.
  • Bollero, A.
By using films as model systems, a combined study based on experiments and micromagnetic simulations has been performed to get further insight into the magnetic behaviour of M-type SrFeO (SrF) system in the nanosized range. Both nanocrystalline SrF quasi-isotropic and highly anisotropic films have been obtained by sputtering. Tuning of the preferred c-axis orientation, either normal or in the film plane, has been possible by varying the growth parameters and, importantly, with no need of any underlayer. Small changes in the oxygen ratio (up to 2%) and in-situ heating lead to different microstructure, which determine the strong variations of the magnetic behaviour observed, including both magnetization curves, easy axis directions, and their different coercive fields, which vary from 1 kOe to 5 kOe within the sample series. Micromagnetic simulations reproduce the experiments with a model based on a mixed population of randomly distributed SrF grains with in-plane and out-of-plane uniaxial anisotropies. The simulations show that intergranular interactions play the major role on the coercive field behaviour of the SrF system. A microstructure comprising largely uncoupled grains leads to improved magnetic performance of highly c-axis oriented SrF nanostructures., This research has been supported by EU-FP7 NANOPYME Project (No. 310516), MINECO (Ministerio de Economía y Competitividad): ENMA project (MAT2014-56955-R), project MAT2013-48009-C4-1-P, MAT2014-52405-C2-2-R, M-era.Net Programme: NEXMAG project (PCIN-2015-126) and Regional Government (Comunidad de Madrid): NANOFRONTMAG (Ref. S2013/MIT-2850). E.C. acknowledges MINECO for the Formación Posdoctoral (JdC) program (FPDI-2013-16008).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Morphological stabilization and KPZ scaling by electrochemically induced co-deposition of nanostructured NiW alloy films

  • Orrillo, P. A.
  • Santalla, S. N.
  • Cuerno, Rodolfo
  • Vázquez Burgos, Luis
  • Ribotta, S. B.
  • Gassa, L. M.
  • Mompean, Federico J.
  • Salvarezza, R. C.
  • Vela, M. E.
We have assessed the stabilizing role that induced co-deposition has in the growth of nanostructured NiW alloy films by electrodeposition on polished steel substrates, under pulsed galvanostatic conditions. We have compared the kinetic roughening properties of NiW films with those of Nifilms deposited under the same conditions, as assessed by Atomic Force Microscopy. The surface morphologies of both systems are super-rough at short times, but differ at long times: while a cauliflower-like structure dominates for Ni, the surfaces of NiW films display a nodular morphology consistent with more stable, conformal growth, whose height fluctuations are in the Kardar-Parisi-Zhang universality class of rough two-dimensional interfaces. These differences are explained by the mechanisms controlling surface growth in each case: mass transport through the electrolyte (Ni) and attachment of the incoming species to the growing interface (NiW). Thus, the long-time conformal growth regime is characteristic of electrochemical induced co-deposition under current conditions in which surface kinetics is hindered due to a complex reaction mechanism. These results agree with a theoretical model of surface growth in diffusion-limited systems, in which the key parameter is the relative importance of mass transport with respect to the kinetics of the attachment reaction., We acknowledge financial support from ANPCyT (PICT 2012-1808), CONICET (PIP 0671) and Universidad Nacional de La Plata (11X760) as well as from MINECO/FEDER (Spain/UE) Grants MAT2014-54231-C4-1-P, FIS2015-66020-C2-1-P and MAT2014-52405-C2-2-R, as well as by Comunidad Autónoma de Madrid (Spain) Grant NANOAVANSENS S2013/MIT-3029.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Attractive interaction between superconducting vortices in tilted magnetic fields

  • Correa, Alexandre
  • Mompean, Federico J.
  • Guillamón, Isabel
  • Herrera, Edwin
  • García-Hernández, Mar
  • Yamamoto, Takashi
  • Kashiwagi, Takanari
  • Kadowaki, Kazuo
  • Buzdin, Alexander I.
  • Suderow, Hermann
  • Munuera, C.
Many practical applications of high T superconductors involve layered materials and magnetic fields applied on an arbitrary direction with respect to the layers. When the anisotropy is very large, Cooper pair currents can circulate either within or perpendicular to the layers. Thus, tilted magnetic fields lead to intertwined lattices of Josephson and Abrikosov vortices, with quantized circulation across and within layers, respectively. Transport in such intertwined lattices has been studied in detail, but direct observation and manipulation of vortices remains challenging. Here we present magnetic force microscopy experiments in tilted magnetic fields in the extremely quasi-two dimensional superconductor BiSrCaCuO. We trigger Abrikosov vortex motion in between Josephson vortices, and find that Josephson vortices in different layers can be brought on top of each other. Our measurements suggest that intertwined lattices in tilted magnetic fields can be intrinsically easy to manipulate thanks to the mutual interaction between Abrikosov and Josephson vortices., Work done in Madrid was supported through grant numbers FIS2017-84330-R, MDM-2014-0377, MAT2014-52405-C2-2-R, RYC-2014-16626, and RYC-2014-15093 of AEI, by the Comunidad de Madrid through program Nanofrontmag-CM (S2013/MIT-2850), by the European Research Council PNICTEYES grant agreement no. 679080, by EU Flagship Graphene Core1 under Grant Agreement no. 696656, by French ANR project OPTOFLUXTRONICS and by EU COST CA16218 Nanocohybri.SEGAINVEX at UAM is also acknowledged. We also acknowledge the support of Departamento Administrativo de Ciencia, Tecnología e Innovación, COLCIENCIAS (Colombia) Convocatoria 784-2017, and the Cluster de investigación en ciencias y tecnologías convergentes de la Universidad Central (Colombia)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of Main Phase in Kxp-Terphenyl and Its Largest Congener Kxpoly(p-phenylene): A Report of Their Magnetic and Electric Properties

  • Carrera, Manuel
  • Mcdonald, James L.
  • Untiedt, Carlos
  • García-Hernández, Mar
  • Mompean, Federico J.
  • Vergés, José A.
  • Guijarro, Albert
[EN] The report of the Meissner effect in annealed samples of K3Tp (Tp = p-terphenyl) above 120 K has raised the interest in this deceptively simple material concerning superconductivity. We have investigated the structural integrity of the Tp framework in the annealed samples of KxTp at increasing processing time and temperature T. Our experimental studies show that both K2Tp and K3Tp mixing stoichiometries have identical Raman (solid state) and UV–vis (1,2-dimethoxyethane solution) spectra, being consistent with the molecular dianion by density functional theory and time-dependent density functional theory simulations. Magnetization vs T plots show no signs of superconductivity and neither do conductance vs T plots. Searching for potentially active minor byproducts formed during thermal processing, the role of K-doped poly(p-phenylene) has been examined, but it does not seem to explain the reported effects either. Further efforts are needed to explain the nature of this elusive phenomenon., Financial support by the Spanish Ministry of Economy and Competitiveness (FIS2015-64222-C2-1-P, MAT2014-52405-C2-2-R, and MAT2016-78625-C2-1-2-P), the Generalitat Valenciana (Grant PROMETEO/2017/139), and the University of Alicante (VIGROB-285) is gratefully acknowledged. M.C. thanks the VIDI of the University of Alicante for a predoctoral grant. A.G. greatly appreciates the computational resources provided by the Department of Applied Physics of the University of Alicante.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic phase diagram, magnetotransport and inverse magnetocaloric effect in the noncollinear antiferromagnet Mn5Si3

  • Luccas, Roberto F.
  • Sanchez-Santolino, Gabriel
  • Correa-Orellana, Alex
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Suderow, Hermann
[EN] The antiferromagnet MnSi has recently attracted attention because a noncollinear spin arrangement has been shown to produce a topological anomalous Hall effect and an inverse magnetocaloric effect. Here we synthesize single crystals of MnSi using flux growth. We determine the phase diagram through magnetization and measure the magnetoresistance and the Hall effect. We find the collinear and noncollinear antiferromagnetic phases at low temperatures and, in addition, a third magnetic phase, in between the two antiferromagnetic phases. The latter magnetic phase might be caused by strain produced by Cu inclusions. This suggests that fluctuations of the mixed character magnetic ordering in this compound can be easily quenched by stress., This work was supported by the Spanish MINECO (Consolider Ingenio Molecular Nanoscience CSD2007-00010 program, FIS2017-84330-R, MDM-2014-0377, MAT2014-52405-C2-2-R, FJCI-2015-25427 and CSD2009-00013), by the Comunidad de Madrid throughprogram NANOMAGCOST-CM (S2018 NMT-4321) and MAD2D-CM(S2013/MIT-3007) and by EU (Graphene Core1 contract No. 696656, Nanopyme FP7-NMP-2012 SMALL-6NMP3-SL 2012310516 and COSTCA16218).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ferroelectric Control of Interface Spin Filtering in Multiferroic Tunnel Junctions

  • Tornos, Javier
  • Gallego, Fernando
  • Valencia, S.
  • Liu, Y. H.
  • Rouco, Víctor
  • Lauter, V.
  • Abrudan, R.
  • Luo, C.
  • Ryll, H.
  • Wang, Q.
  • Hernandez-Martin, D.
  • Orfila, G.
  • Cabero, Mariona
  • Cuellar, Fabián A.
  • Arias, D.
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Radu, F.
  • Charlton, T.R.
  • Rivera-Calzada, A.
  • Sefrioui, Z.
  • Te Velthuis, S. G. E.
  • León, Carlos
  • Santamaría, Jacobo
[EN] The electronic reconstruction occurring at oxide interfaces may be the source of interesting device concepts for future oxide electronics. Among oxide devices, multiferroic tunnel junctions are being actively investigated as they offer the possibility to modulate the junction current by independently controlling the switching of the magnetization of the electrodes and of the ferroelectric polarization of the barrier. In this Letter, we show that the spin reconstruction at the interfaces of a La0.7Sr0.3MnO3/BaTiO3/La0.7Sr0.3MnO3 multiferroic tunnel junction is the origin of a spin filtering functionality that can be turned on and off by reversing the ferroelectric polarization. The ferroelectrically controlled interface spin filter enables a giant electrical modulation of the tunneling magnetoresistance between values of 10% and 1000%, which could inspire device concepts in oxides-based low dissipation spintronics., Authors acknowledge received funding from the project Quantox of QuantERA ERA-NET Cofund in Quantum Technologies (Grant Agreement No. 731473) implemented within the European Union’s Horizon 2020 Programme. This work was supported by Spanish MINECO through Grants No. MAT2014-52405-C02, No. MAT2017-87134-C02, No. MAT2015-72795-EXP, and by Comunidad de Madrid through S2013/ 336 MIT-2740.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structural, magnetic and dielectric properties of the novel magnetic spinel compounds ZnCoSnO4 and ZnCoTiO4

  • Ruiz-León, Domingo
  • Mompean, Federico J.
  • Prado-Gonjal, Jesús
  • Marco, J.F.
  • García-Hernández, Mar
  • Schmidt, Rainer
8 pags, 9 figs, 4 tabs, The transparent semiconductor ZnSnO with cubic spinel structure and the isostructural ZnTiO have been magnetically doped with Co. ZnCoSnO and ZnCoTiO exhibit ferrimagnetism below T ≈ 13 K and T ≈ 17 K. Ferrimagnetic moments are evident in M vs H curves below T by small hysteresis. Fits to strictly linear Curie-Weiss plots above T give μ ≈ 4.86 μ and ≈4.91 μ for ZnCoSnO and ZnCoTiO, above theoretical predictions. Impedance spectroscopy data from sintered ceramic can be fitted with a standard equivalent circuit model based on two RC elements for bulk and GB areas. The relative dielectric permittivity of the bulk is ≈20 and ≈30 for ZnSnO and ZnTiO. The semiconducting ZnCoSnO and ZnCoTiOceramics exhibit bulk resistivity of ≈1 10 Ω cm and ≈1 10 Ω cm at 560 K (287 °C), and bulk activation energies of E ≈ 1.2 eV and 1.1 eV., R.S. acknowledges a travel grant (Convenio Internacional) from the Universidad Complutense de Madrid to visit the USACH in Chile. JPG thanks the Spanish MINECO for granting a Juan de la Cierva fellowship. Spanish MINECO grant MAT2014-52405-C2-2-R is also acknowledged.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Thermal conductivity reduction by fluctuation of the filling fraction in filled cobalt antimonide skutterudite thermoelectrics

  • Serrano Sánchez, F.
  • Prado Gonjal, Jesús de la Paz
  • Nemes, Norbert Marcel
  • Biskup Zaja, Nevenko
  • Dura, O. J.
  • Martinez, J. L.
  • Fernandez Diaz, M. T.
  • Fauth, F.
  • Alonso, J. A.
The reduction of the lattice thermal conductivity is one of the crucial steps in improving thermoelectric materials. In skutterudites, a well-known approach is to reduce the thermal conductivity by filling the structural cage with rare-earth atoms. In this work, we show that it is not just the amount of such filling itself but its nanoscale structuration that lowers the thermal conductivity. A straightforward synthesis procedure under high pressure yields Ce- and Yb-filled CoSb3 skutterudites, with and without an inhomogeneous distribution of the filler atoms. The composition of the phases is evaluated from synchrotron Xray diffraction (SXRD) data; the highly nanostructured morphology is verified by high-resolution transmission electron microscopy (TEM). The filling fluctuation, i.e., the uneven distribution of filling atoms in the sample originating a phase segregation, brings about low lattice thermal conductivity, as a strong source of phonon scattering. This effect is prominent in the Ce-filled compound, where Ce is segregated into Ce-rich and Ce-poor regions, and the lattice contribution of the thermal conductivity kappa(L), shows a concomitant reduction, approaching values as low as 1.6 W m(-1) K-1 at 800 K. Although the level of filling is much higher in YbxCoSb3, its lattice thermal conductivity remains larger. Overall, though, its power factor is enhanced due to charge transfer from the Yb-filler. We thus define a new paradigm for the design of filled skutterudites with exceptionally low thermal conductivities, based on the nanoscale mixing of two phases with different filling factors, spontaneously induced by high-pressure synthesis conditions, which can be considered as pseudoamorphous structures with significant reduction in kappa(L).