Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Room temperature in-plane 100 magnetic easy axis for Fe3O 4/SrTiO3(001):Nb grown by infrared pulsed laser deposition

  • Monti, Matteo
  • Sanz, Mikel
  • Oujja, Mohamed
  • Rebollar, Esther
  • Castillejo, Marta
  • Pedrosa, Francisco J.
  • Bollero, Alberto
  • Camarero de Diego, Julio
  • Cuñado, Jose Luis F
  • Nemes, N. M.
  • Mompeán, Federico J.
  • García-Hernández, Mar
  • Nie, Shu
  • McCarty, Kevin F.
  • N'Diaye, Alpha T.
  • Chen, Gong
  • Schmid, Andreas K.
  • Marco, José Francisco
  • De La Figuera, Juan
The following article appeared in Journal of Applied Physics 114.22 (2013): 223902 and may be found at http://scitation.aip.org/content/aip/journal/jap/114/22/10.1063/1.4837656, We examine the magnetic easy-axis directions of stoichiometric magnetite films grown on SrTiO3:Nb by infrared pulsed-laser deposition. Spin-polarized low-energy electron microscopy reveals that the individual magnetic domains are magnetized along the in-plane h100i film directions. Magneto-optical Kerr effect measurements show that the maxima of the remanence and coercivity are also along in-plane h100i film directions. This easy-axis orientation differs from bulk magnetite and films prepared by other techniques, establishing that the magnetic anisotropy can be tuned by film growth, This research was supported by Projects CTQ2010-15680, MAT2009-14578-C03-01 (MICINN), MAT2012-38045-C04-01 (MINECO), MAT2011-27470-C02-02 (MICINN), MAT2011-25598 (MINECO), the EUFIG FP7 NANOPYME Project (No. 310516) and by the Office of Basic Energy Sciences, Division of Materials and Engineering Sciences, U.S. Department of Energy under Contract No. DE-AC04-94AL85000 (Sandia National Laboratories). Experiments performed at the National Center for Electron Microscopy, Lawrence Berkeley National Laboratory, were supported by the Office of Science, Office of Basic Energy Sciences, Scientific User Facilities Division, of the U.S. Department of Energy under Contract No. DEAC02- 05CH11231. E.R., M.O., M.S., A.T.N., and M.M.gratefully thank financial support from the Ram on y Cajal Programme (MINECO), a CSIC contract, a Geomateriales (CAM, S2009/Mat-1629) contract, a Feodor Lynen Postdoctoral Fellowship from the Alexander von Humboldt Foundation and a contract through the MICINN FPI Programme, respectively. We are grateful to Professor T. Ezquerra (IEM, CSIC) for the use of the AFM system and M. Juanco (ICA, CSIC) for XRD measurements
Biblos-e Archivo. Repositorio Institucional de la UAM
Publicación Artículo científico (JournalArticle)

Subsurface bending and reorientation of tilted vortex lattices in bulk isotropic superconductors due to Coulomb-like repulsion at the surface

  • Herrera Vasco, Edwin
  • Guillamón Gómez, Isabel
  • Galvis, J. A.
  • Correa, A.
  • Fente, A.
  • Vieira Díaz, Sebastián
  • Suderow Rodríguez, Hermann Jesús
  • Martynovich, A. Yu
  • Kogan, V. G.
We study vortex lattices (VLs) in superconducting weak-pinning platelet-like single crystals of β-Bi2Pd in tilted magnetic fields with a scanning tunneling microscope. We show that vortices exit the sample perpendicular to the surface and are thus bent beneath the surface. The structure and orientation of the tilted VLs in the bulk are, for large tilt angles, strongly affected by Coulomb-type intervortex repulsion at the surface due to stray magnetic fields, The authors are grateful to P. C. Canfield for discussions, for having proposed the growth of single crystals of β-Bi2 Pd, and for having shown how to do that. E.H. was supported by the Departamento Administrativo de Ciencia, Tecnología e Innovación, COLCIENCIAS (Colombia) Programa Doctorados en el Exterior Convocatoria Program No. 568-2012 and the Universidad Nacional de Colombia, División de Investigación y Extensión sede Bogotá (DIEB) Project No. 35615. I.G. was supported by the ERC (Grant Agreement No. 679080 and the Ramón y Cajal Program through Grant No. RyC-2014-15093). This work also was supported by the Spanish MINECO (Grants No. FIS2014-54498-R and No. MAT2014-52405-C2-02), by the Comunidad de Madrid through Program NANOFRONTMAG-CM (Program No. S2013/MIT-2850), and by Axa Research Funds. We also acknowledge the SEGAINVEX workshop of UAM, Banco Santander and COST Grant No. CA16128 action, the EU through Grant Agreements No. FP7-PEOPLE-2013-CIG 618321 and No. 604391, and Nanopyme Grant No. FP7-NMP-2012-SMALL-6 NMP3-SL 2012-310516. V.G.K. was supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division. The Ames Laboratory is operated for the U.S. DOE by Iowa State University under Contract No. DE-AC02-07CH11358
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Room temperature in-plane 〈100〉 magnetic easy axis for Fe3O4/SrTiO3(001):Nb grown by infrared pulsed laser deposition

  • Monti, Matteo
  • Sanz, Mikel
  • Oujja, Mohamed
  • Rebollar, Esther
  • Castillejo, Marta
  • Bollero, A.
  • Camarero, Jesús Julio
  • Nemes, N. M.
  • Mompean, Federico J.
  • García-Hernández, Mar
  • McCarty, K.F.
  • Marco, J.F.
  • de la Figuera, Juan
5 páginas, 3 figuras.-- et al., We examine the magnetic easy-axis directions of stoichiometric magnetite films grown on SrTiO3:Nb by infrared pulsed-laser deposition. Spin-polarized low-energy electron microscopy reveals that the individual magnetic domains are magnetized along the in-plane 100 film directions. Magneto-optical Kerr effect measurements show that the maxima of the remanence and coercivity are also along in-plane 100 film directions. This easy-axis orientation differs from bulk magnetite and films prepared by other techniques, establishing that the magnetic anisotropy can be tuned by film growth. © 2013 AIP Publishing LLC., This research was supported by Projects CTQ2010-15680, MAT2009-14578-C03-01 (MICINN), MAT2012-38045-C04-01 (MINECO), MAT2011-27470-C02-02 (MICINN), MAT2011-25598 (MINECO), the EU-FP7 NANOPYME Project (No. 310516) and by the Office of Basic Energy Sciences, Division of Materials and Engineering Sciences, U.S. Department of Energy under Contract No. DE-AC04-94AL85000 (Sandia National Laboratories). Experiments performed at the National Center for Electron Microscopy, Lawrence Berkeley National Laboratory, were supported by the Office of Science, Office of Basic Energy Sciences, Scientific User Facilities Division, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. E.R., M.O., M.S., A.T.N., and M.M. gratefully thank financial support from the Ramón y Cajal Programme (MINECO), a CSIC contract, a Geomateriales (CAM, S2009/Mat-1629) contract, a Feodor Lynen Postdoctoral Fellowship from the Alexander von Humboldt Foundation and a contract through the MICINN FPI Programme, respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stoichiometric magnetite grown by infrared nanosecond pulsed laser deposition

  • Sanz, Mikel
  • Oujja, Mohamed
  • Rebollar, Esther
  • Marco, J.F.
  • de la Figuera, Juan
  • Monti, Matteo
  • Bollero, A.
  • Camarero, Jesús Julio
  • Pedrosa, Francisco J.
  • García-Hernández, Mar
  • Castillejo, Marta
Pulsed laser deposition (PLD) is a versatile technique for the fabrication of nanostructures due to the possibilities it offers to control size and shape of nanostructured deposits by varying the laser parameters. Magnetite nanostructures are currently promising materials to be used in computing, electronic devices and spintronic applications. For all these uses the fabrication of uniform nanostructured pure magnetite thin films is highly advantageous. In PLD of magnetite, the laser irradiation wavelength and substrate temperature crucially affect the composition, crystallinity, surface structure and the magnetic properties of the grown samples. This work shows that the use of nanosecond IR laser at 1064 nm enhances the quality of the resulting magnetite thin films, compared to the extensively used UV wavelengths. Deposition at 1064 nm, upon heating the substrate at 750 K, produces thin films constituted by stoichiometric magnetite nanoparticles with sharp edges and sizes ranging from 80 to 150 nm, with a Verwey transition at 119 K and a coercivity of 232 Oe at room temperature, close to those of pure bulk magnetite. Thus, IR-PLD of self-prepared hematite sintered targets constitutes a low-cost procedure of fabrication of pure magnetite nanostructured thin films. © 2013 Elsevier B.V. All rights reserved., We acknowledge funding under Projects CTQ2010-15680, CONSOLIDER CSD2007-00058 and CSD2009-00013 (MICINN) and MAT2012-38045-C04-01, MAT2011-25598 and MAT2011-27470-C02-02 (MINECO). E.R, A.B., M.O., M.S. and M.M. gratefully thank financial support from Ramón y Cajal Programme (RYC-2011-08069 and RYC-2007-01727), CSIC contract, Geomateriales (CAM, S2009/Mat-1629) and MICINN FPI Programme, respectively. A.B., F.J.P., and M.G.-H. gratefully thank funding under EU-FP7 NANOPYME Project (No. 310516)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mössbauer and Magnetic Properties of Coherently Mixed Magnetite-Cobalt Ferrite Grown by Infrared Pulsed-Laser Deposition

  • de la Figuera, Juan
  • Quesada, Adrián
  • Martín-García, Laura
  • Sanz, Mikel
  • Oujja, Mohamed
  • Castillejo, Marta
  • Mascaraque, Arantzazu
  • N'Diaye, A. T.
  • Foerster, M.
  • Aballe, Lucía
  • Marco, J.F.
We have studied the magnetic properties and the composition of cobalt ferrite single crystal films on SrTiO3 : Nb grown by infrared pulsed-laser deposition. Mössbauer spectra have been recorded from both the target used to grow the films and the films themselves. The Mössbauer spectra of the target taken at low temperatures show a strong dependence of the recoil free fraction of the octahedral sites with temperature. The films composition, with a coexistence of Co-enriched cobalt ferrite and magnetite, has been estimated assuming a similar ratio of the recoil free fractions of the films. X-ray absorption and x-ray magnetic circular dichroism measurements confirm the valence composition of the film and show ferromagnetic Fe-Co coupling in the films with a coercive field around 0.5 T at room temperature. The combination of these characterization techniques allows establishing the coherent structural and magnetic properties of this biphase system., (MINECO) through Projects No. MAT2012 - 38045 - C04 - 01, CTQ2013 - 43086 - P, and MAT2013 - 48009 - C4 - 1 - P and by the EU - FP7 NANOPYME Project (No. 310516)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of wavelength, deposition temperature and substrate type on cobalt ferrite thin films grown by pulsed laser deposition

  • Oujja, Mohamed
  • Martín-García, Laura
  • Rebollar, Esther
  • Quesada, Adrián
  • García García-Tuñón, Miguel Ángel
  • Fernández Lozano, José Francisco
  • Marco, J.F.
  • de la Figuera, Juan
  • Castillejo, Marta
  • AMPHIBIAN Project ID:720853
In pulsed laser deposition, the laser irradiation wavelength and the substrate nature and temperature crucially affect the composition, crystallinity, structure and magnetic properties of the grown deposits. In this work, cobalt ferrite (CoFeO) thin films were deposited on Si (1 0 0) and SrTiO (1 0 0) single crystal substrates at room temperature and 770 K using laser wavelengths of 213, 532 and 1064 nm. The deposited films were characterized by atomic force microscopy to determine the surface morphology, by X-ray diffraction to examine their crystallinity, and by micro-Raman, scanning electron microscopy/energy-dispersive X-ray spectroscopy, X-ray photoelectron and Mössbauer spectroscopies to investigate their composition and stoichiometry. Magnetic characterization was carried out by superconducting quantum interference device magnetometry. At 770 K and 1064 nm, the films consisted of single-crystal CoFeO ((1 0 0) orientation) when grown on SrTiO, and of polycrystalline CoFeO when grown on Si. The composition of the films became more complex at shorter wavelengths as they contained magnetite and other minority phases in different concentrations. The crystalline quality of the films also decreased with decreasing wavelength even including superparamagnetic species. In general, for the same wavelength, the deposits obtained at room temperature were less crystalline than those produced with the substrate heated at 770 K., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through Projects CTQ2016-75880-P, CTQ2013-43086-P and MAT2015-64110-C2-1-P. M. O. and E. R. thank CSIC and RYC-2011-08069 (Ramón y Cajal Programme) for contracts. We thank CSIC Intramural Project PIE 201560E068 and financial support from the European Commission through the project NANOPYME FP7-NMP-2012-SMALL-6 NANOPYME (n° 310516) and AMPHIBIAN H2020-NMBP-2016-720853. W, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Approaching Ferrite-Based Exchange-Coupled Nanocomposites as Permanent Magnets

  • Granados-Miralles, Cecilia
  • Saura-Múzquiz, Matilde
  • Andersen, Henrik L.
  • Quesada, Adrián
  • Ahlburg, Jakob V.
  • Dippel, Ann-Christin
  • Canèvet, Emmanuel
  • Christensen, Mogens
  • AMPHIBIAN Project ID:720853
During the past decade, CoFe2O4 (hard)/Co–Fe alloy (soft) magnetic nanocomposites have been routinely prepared by partial reduction of CoFe2O4 nanoparticles. Monoxide (i.e., FeO or CoO) has often been detected as a byproduct of the reduction, although it remains unclear whether the formation of this phase occurs during the reduction itself or at a later stage. Here, a novel reaction cell was designed to monitor the reduction in situ using synchrotron powder X-ray diffraction (PXRD). Sequential Rietveld refinements of the in situ data yielded time-resolved information on the sample composition and confirmed that the monoxide is generated as an intermediate phase. The macroscopic magnetic properties of samples at different reduction stages were measured by means of vibrating sample magnetometry (VSM), revealing a magnetic softening with increasing soft phase content, which was too pronounced to be exclusively explained by the introduction of soft material in the system. The elemental compositions of the constituent phases were obtained from joint Rietveld refinements of ex situ high-resolution PXRD and neutron powder diffraction (NPD) data. It was found that the alloy has a tendency to emerge in a Co-rich form, inducing a Co deficiency on the remaining spinel phase, which can explain the early softening of the magnetic material., The authors thank financial support from the European Commission through the NANOPYME (FP7-SMALL-310516) and AMPHIBIAN (H2020-NMBP-2016-720853) projects. Financial support from the Danish National Research Foundation (Center for Materials Crystallography, DNRF-93) and the Danish Center for Synchrotron and Neutron Science (DanScatt) is gratefully acknowledged. Parts of this research were carried out at PETRA III at DESY, a member of the Helmholtz Association (HGF). We thank Jozef Bednarcik for assistance in using beamline P02.1. This work is based on experiments performed at the Swiss spallation neutron source SINQ, Paul Scherrer Institute, Villigen, Switzerland. This project has received funding from the European Union’s Seventh Framework Programme for research, technological development, and demonstration under the NMI3-II Grant 283883., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

AMPHIBIAN CSIC experimental data insitu exsitu PXRD NPD [Dataset]

  • Granados-Miralles, Cecilia
  • Saura-Múzquiz, Matilde
  • Andersen, Henrik L.
  • Quesada, Adrián
  • Ahlburg, Jakob V.
  • Dippel, Ann-Christin
  • Canèvet, Emmanuel
  • Christensen, Mogens
  • AMPHIBIAN Project ID:720853
The different datasets are divided in folders as follows: 1. In situ experiments. The article is based on 7 different in situ experiments: a. 400C_5mLmin_fr10; b. 400C_10mLmin_fr23; c. 400C_20mLmin_fr6; d. 400C_30mLmin_fr12; e. 300C_10mLmin_fr4; f. 350C_10mLmin_fr18; g. 500C_10mLmin_fr9. (Due to space limitations, only the data corresponding to the experiment c were uploaded to this repository. The remaining data are accessible through private communication with Cecilia Granados-Miralles, c.granados.miralles@icv.csic.es). The folder “c_400C_20mLmin_fr6” contains in situ PXRD data (time resolution=5 s) collected during reduction at the temperature and gas flow indicated in the folder name (i.e. 400C_20mLmin stands for 400 °C and 20 mL/min). The temperature indicated in the file names is the set temperature but the sample temperature is the indicated in the folder name (i.e. Tset430 led to a sample temperature of 400 °C). Heating started on the frame indicated in the folder name (i.e. fr6 stands for frame 6). This folder contains 2D-diffraction images in *.tif format, which may be opened with the Python-based program for on-the-fly data processing and exploration of two-dimensional X-ray diffraction area detector data, available for free download at http://www.clemensprescher.com/programs/dioptas., 2. Ex situ experiments: a. PXRD_Cu 1D-diffraction patterns in *.dat format. 3 space-/tab-separated columns: 2theta angle (degree), Diffracted Intensity (arbitrary units), σ (arbitrary units); b. PXRD_Co Same as previous; c. NPD_DMC 1D-diffraction patterns in *.dat format. The first line indicates: narrowest 2theta angle measured, measurement step, widest 2theta angle. The following values are the diffracted intensities recorded for each 2theta step; d. NPD_HRPT; Same as previous e. VSMHysteresis loops: Magnetic moment as a function of a variable applied field in *.dat format. Several comma-separated columns of which the relevant are the 4th, 5th, and 6th columns, which contain: Magnetic Field (Oe), Moment (emu), M. Std. Err. (emu)., During the past decade, CoFe2O4 (hard)/Co–Fe alloy (soft) magnetic nanocomposites have been routinely prepared by partial reduction of CoFe2O4 nanoparticles. Monoxide (i.e., FeO or CoO) has often been detected as a byproduct of the reduction, although it remains unclear whether the formation of this phase occurs during the reduction itself or at a later stage. Here, a novel reaction cell was designed to monitor the reduction in situ using synchrotron powder X-ray diffraction (PXRD). Sequential Rietveld refinements of the in situ data yielded time-resolved information on the sample composition and confirmed that the monoxide is generated as an intermediate phase. The macroscopic magnetic properties of samples at different reduction stages were measured by means of vibrating sample magnetometry (VSM), revealing a magnetic softening with increasing soft phase content, which was too pronounced to be exclusively explained by the introduction of soft material in the system. The elemental compositions of the constituent phases were obtained from joint Rietveld refinements of ex situ high-resolution PXRD and neutron powder diffraction (NPD) data. It was found that the alloy has a tendency to emerge in a Co-rich form, inducing a Co deficiency on the remaining spinel phase, which can explain the early softening of the magnetic material., European Comission through FP7 program, NANOPYME project, grant agreement no. 310516. European Comission through H2020 program, AMPHIBIAN Project, grant agreement no. 720853. Danish National Research Foundation through Center for Materials Crystallography, DNRF-93. Danish Center for Synchrotron and Neutron Science through DanScatt. European Comission through FP7 program, NMI3-II project, grant agreement no. 283883., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effective high-energy ball milling in air of Fe65Co35 alloys

  • Sirvent, P.
  • Berganza, Eider
  • Aragón Sánchez, Ana María
  • Bollero, A.
  • Moure Arroyo, Alberto
  • García-Hernández, Mar
  • Marín, Pilar
  • Fernández, Joaquín
  • Quesada, Adrián
Fe65Co35 alloys are technologically relevant, especially in magnetic storage and composite permanent magnets, due to the fact that they present higher saturation magnetization per volume than any other material. Out of the various approaches undertaken for its production, mechanical ball milling remains the most common and efficient method, especially considering the large industrial scale of the applications. With the development of cost-efficient processing in mind, the influence of performing the synthesis of the FeCo alloys in air instead of the standard argon atmosphere is studied. The structural and magnetic characterization, along with the study of the oxygen content of the samples, proves that synthesizing FeCo alloys in air produce materials with nearly identical magnetic performance as their argon-milled counterpart, with the oxidation extent of the materials consisting almost exclusively of the oxide passivating layer located at the surface. In addition, no aging effect was observed in the saturation magnetization up to 6 months. It is concluded that the use of argon atmospheres, desiccators and/or glove boxes may be entirely removed from the process without affecting the magnetic properties., The authors would like to thank financial support from the European Commission through the Project NANOPYME FP7-NMP-2012-SMALL-6 NANOPYME No. 310516, and from the Spanish Ministerio de Economía y Competitividad through the Juan de la Cierva program and through Project No. MAT 2010-21088-C03-01.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exchange-spring behavior below the exchange length in hard-soft bilayers in multidomain configurations

  • Quesada, Adrián
  • Delgado Soria, Guiomar
  • Pascual, Laura
  • Aragón Sánchez, Ana María
  • Marín, Pilar
  • Granados-Miralles, Cecilia
  • Foerster, M.
  • Aballe, Lucía
  • Prieto, J. E.
  • de la Figuera, Juan
  • Fernández Lozano, José Francisco
  • Prieto, P.
  • AMPHIBIAN Project ID:720853
Exchange-coupled hard-soft biphase magnets are technologically relevant systems in that they enable tailoring the magnetization reversal process. Here, exchange-spring behavior is observed in CoFe2O4/FeCo bilayers for soft thicknesses as thin as 2 nm, at least four times below the exchange length of the system. This result is in contrast with the accepted theory for spring magnets that states that the exchange length defines the critical thickness below which both magnetic phases should be rigidly coupled. In combination with micromagnetic calculations, this surprising observation is understood as a consequence of the dominance of domain-wall propagation in the soft phase during the reversal process, so far unaccounted for in theoretical descriptions. Our results emphasize the need to expand the existing spring theory from coherent rotation to domain-wall related processes in multidomain configurations in order to accurately design magnetic heterostructures with controllable reversal., Spanish Ministerio de Ciencia, Innovación y Universidades through Projects No. MAT2017-86450-C4-1-R, No. MAT2015-64110-C2-1-P, No. MAT2015-64110-C2-2-P, and No. IS2017-82415-R and by the European Commission through H2020 Project No. 720853 (AMPHIBIAN) and FP7 Project No. 310516 (NANOPYME)., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic field dependence of the density of states in the multiband superconductor β-Bi2Pd

  • Herrera, E.
  • Guillamón, Isabel
  • Galvis, J. A.
  • Correa Orellana, Alexandre
  • Fente, Antón
  • Luccas, Roberto F.
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Vieira, S.
  • Brison, J. P.
  • Suderow, Hermann
We present very low-temperature scanning tunneling microscopy (STM) experiments on single-crystalline samples of the superconductor β-Bi2Pd. We find a single superconducting gap from the zero-field tunneling conductance. However, the magnetic field dependence of the intervortex tunneling conductance is higher than the one expected in a single-gap superconductor. Such an increase in the intervortex tunneling conductance has been found in superconductors with multiple superconducting gaps. We also find that the hexagonal vortex lattice is locked to the square atomic lattice as expected in crystalline superconductors with anisotropic Fermi surfaces. Moreover, we compare the upper critical field Hc2(T) obtained in our sample with previous measurements and find that Hc2(T) does not increase by reducing the mean free path. We fit Hc2(T) and show that multiband Fermi surface is needed to explain the observed behavior. We propose that β-Bi2Pd is a single-gap multiband superconductor. We anticipate that single-gap superconductivity might often occur in compounds with anisotropic multiband Fermi surfaces., We wish to acknowledge the support of Departamento Administrativo de Ciencia, Tecnología e Innovación, COLCIENCIAS (Colombia) Programa Doctorados en el Exterior Convocatoria 568-2012. This work was supported by the Spanish Ministerio de Economía y Competitividad (FIS2011-23488, MAT2011-27470-C02-02, and CSD2009-00013), by the Comunidad de Madrid through programs NANOFRONTMAG-CM (S2013/MIT-2850) and MAD2D-CM (S2013/MIT-3007) and by AXA Research Fund. We also acknowledge SEGAINVEX workshop of UAM, Banco Santander as well as PEOPLE, Graphene Flagship, and NMP programs of EU (Grant Agreements FP7-PEOPLE-2013-CIG 618321, 604391 and Nanopyme FP7-NMP-2012_SMALL-6 NMP3-SL 2012_310516). Furthermore, we acknowledge European Cooperation in Science and Technology MP1201 action, and discussions with P. Samuely.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic small-angle neutron scattering

  • Mühlbauer, Sebastian
  • Honecker, Dirk
  • Périgo, Élio A.
  • Bergner, Frank
  • Disch, Sabrina
  • Heinemann, André
  • Erokhin, Sergey
  • Berkov, Dmitry
  • Leighton, Chris
  • Eskildsen, Morten Ring
  • Michels, Andreas
  • AMPHIBIAN Project ID:720853
[EN] Small-angle neutron scattering (SANS) is one of the most important techniques for microstructure determination, being utilized in a wide range of scientific disciplines, such as materials science, physics, chemistry, and biology. The reason for its great significance is that conventional SANS is probably the only method capable of probing structural inhomogeneities in the bulk of materials on a mesoscopic real-space length scale from roughly 1 to 300 nm. Moreover, the exploitation of the spin degree of freedom of the neutron provides SANS with a unique sensitivity to study magnetism and magnetic materials at the nanoscale. As such, magnetic SANS ideally complements more real-space and surface-sensitive magnetic imaging techniques, e.g., Lorentz transmission electron microscopy, electron holography, magnetic force microscopy, Kerr microscopy, or spin-polarized scanning tunneling microscopy. This review summarizes the recent applications of the SANS method to study magnetism and magnetic materials. This includes a wide range of materials classes from nanomagnetic systems such as soft magnetic Fe-based nanocomposites, hard magnetic Nd-Fe-B-based permanent magnets, magnetic steels, ferrofluids, nanoparticles, and magnetic oxides to more fundamental open issues in contemporary condensed matter physics such as skyrmion crystals, noncollinear magnetic structures in noncentrosymmetric compounds, magnetic or electronic phase separation, and vortex lattices in type-II superconductors. Special attention is paid not only to the vast variety of magnetic materials and problems where SANS has provided direct insight, but also to the enormous progress made regarding the micromagnetic simulation of magnetic neutron scattering., Deutsche Forschungsgemeinschaft (Project No. BE 2464/10-3), the EU-FP7 project “NANOPYME” (310516), and the EU Horizon-2020 project “AMPHIBIAN” (720853). M. R. E. was supported by the U.S. Department of Energy, Office of Basic Energy Sciences, under Award No. DE-SC0005051. F. B. thanks Andreas Ulbricht for fruitful discussions over the many years. C. L. was funded by the U.S. Department of Energy through the University of Minnesota Center for Quantum Materials under DE-FG02-06ER46275 and DESC-0016371. S. D. acknowledges financial support from the German Research Foundation (DFG Emmy Noether Grant No. DI 1788/2-1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Inter-grain effects on the magnetism of M-type strontium ferrite

  • Céspedes, Eva
  • Rodriguez-Rodriguez, G.
  • Navío, C.
  • Osorio, M. R.
  • Guerrero, R.
  • Pedrosa, F. J.
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Fernández, J. F.
  • Quesada, Adrián
  • Camarero, J.
  • Bollero, A.
By using films as model systems, a combined study based on experiments and micromagnetic simulations has been performed to get further insight into the magnetic behaviour of M-type SrFeO (SrF) system in the nanosized range. Both nanocrystalline SrF quasi-isotropic and highly anisotropic films have been obtained by sputtering. Tuning of the preferred c-axis orientation, either normal or in the film plane, has been possible by varying the growth parameters and, importantly, with no need of any underlayer. Small changes in the oxygen ratio (up to 2%) and in-situ heating lead to different microstructure, which determine the strong variations of the magnetic behaviour observed, including both magnetization curves, easy axis directions, and their different coercive fields, which vary from 1 kOe to 5 kOe within the sample series. Micromagnetic simulations reproduce the experiments with a model based on a mixed population of randomly distributed SrF grains with in-plane and out-of-plane uniaxial anisotropies. The simulations show that intergranular interactions play the major role on the coercive field behaviour of the SrF system. A microstructure comprising largely uncoupled grains leads to improved magnetic performance of highly c-axis oriented SrF nanostructures., This research has been supported by EU-FP7 NANOPYME Project (No. 310516), MINECO (Ministerio de Economía y Competitividad): ENMA project (MAT2014-56955-R), project MAT2013-48009-C4-1-P, MAT2014-52405-C2-2-R, M-era.Net Programme: NEXMAG project (PCIN-2015-126) and Regional Government (Comunidad de Madrid): NANOFRONTMAG (Ref. S2013/MIT-2850). E.C. acknowledges MINECO for the Formación Posdoctoral (JdC) program (FPDI-2013-16008).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Subsurface bending and reorientation of tilted vortex lattices in bulk isotropic superconductors due to Coulomb-like repulsion at the surface

  • Herrera, E.
  • Guillamón, Isabel
  • Galvis, J. A.
  • Correa Orellana, Alexandre
  • Fente, Antón
  • Vieira, S.
  • Suderow, Hermann
  • Martynovich, A. Y.
  • Kogan, V. G.
We study vortex lattices (VLs) in superconducting weak-pinning platelet-like single crystals of β-Bi2Pd in tilted magnetic fields with a scanning tunneling microscope. We show that vortices exit the sample perpendicular to the surface and are thus bent beneath the surface. The structure and orientation of the tilted VLs in the bulk are, for large tilt angles, strongly affected by Coulomb-type intervortex repulsion at the surface due to stray magnetic fields., E.H. was supported by the Departamento Administrativo de Ciencia, Tecnología e Innovación, COLCIENCIAS (Colombia) Programa Doctorados en el Exterior Convocatoria Program No. 568-2012 and the Universidad Nacional de Colombia, División de Investigación y Extensión sede Bogotá (DIEB) Project No. 35615. I.G. was supported by the ERC (Grant Agreement No. 679080 and the Ramón y Cajal Program through Grant No. RyC-2014-15093). This work also was supported by the Spanish MINECO (Grants No. FIS2014-54498-R and No. MAT2014-52405-C2-02), by the Comunidad de Madrid through Program NANOFRONTMAG-CM (Program No. S2013/MIT-2850), and by Axa Research Funds. We also acknowledge the SEGAINVEX workshop of UAM, Banco Santander and COST Grant No. CA16128 action, the EU through Grant Agreements No. FP7-PEOPLE-2013-CIG 618321 and No. 604391, and Nanopyme Grant No. FP7-NMP-2012-SMALL-6 NMP3-SL 2012-310516. V.G.K. was supported by the U.S. Department of Energy, Office of Science, Basic Energy Sciences, Materials Sciences and Engineering Division. The Ames Laboratory is operated for the U.S. DOE by Iowa State University under Contract No. DE-AC02-07CH11358.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

AMPHIBIAN AU-IFE experimental dataset SrFe12O19 SPS RSCAdv2019 [Dataset]

  • Stingaciu, Marian
  • Eikeland, Anna Zink
  • AMPHIBIAN Project ID:720853
  • Gjørup, Frederik Holm
  • Deledda, Stefano
  • Christensen, Mogens
  • AMPHIBIAN Project ID:720853
The work contains 5 figures and the datasets corresponding to each figure are included in separate folders in form of .xy format or .png format. 1) The folder “Fig1” contains the “Fig1.png” which illustrates the SPS sintering conditions regarding the heating rate, dwelling time and the applied uniaxial pressure. The lower part of the figure is an illustration of the setup used at the pre/alignment of particles in an external magnetic field up to 0.55 Tesla. 2) The folder “Fig2” contains the powder X-ray data measured for different Sr/Fe molar ratios (“SrFe1I2_data.xy”, “SrFe1I4_data.xy”, “SrFe1I6_data.xy”,” SrFe1I8_data.xy) and the calculated data based on Rietveld refinement by using FullProf (“SrFe1I2_calculated.xy”, “SrFe1I4_ calculated xy”, “SrFe1I6_ calculated.xy”,” SrFe1I8_ calculated.xy”). The .xy files contain two tab delimited columns. The first column represent the 2theta diffraction angle and the second column gives the arbitrary intensities. “Figure2.png” gives the weight percentages of the different chemical phases detected in the powders while the lower part of the figure gives the crystallites sizes calculated by FullProf program. 3) The folder “Fig3” contains the magnetization data in a form of hysteresis loops measured at room temperature. Each file contains 3 columns. First column represent the applied external magnetic field (Oe units), the second column is the emu while the third column represents the emu/grams units. 4) The folder “Fig4” contains the oriented volume fraction data. Each file is a 2 columns data. The tilting angle k is given in the first column while the oriented volume fraction is given in the second column. “Fig4.png” show the pole figures obtained from x-ray diffraction measurements. 5) The folder “Fig5” gives the data repository for hysteresis loops measured at room temperature. Here the effect of external magnetic field influence prior compaction was studied. Four data sets are included here. “H_0.15T “, “H_0.45T”, “H_0.55T” and “H_0.15T_t2min. The columns are the same as described for folder “Fig3”., [EN] The magnetic properties of SrFe12O19 nanocrystallites produced by hydrothermal synthesis and consolidated by Spark Plasma Sintering (SPS) were optimized by varying the compaction parameters: sintering time, sintering temperature, uniaxial pressure or pre-compaction in a magnetic field. Highly textured compacts with a high degree of crystallite alignment were produced. Qualitative and quantitative textural information was obtained based on X-ray diffraction pole figure measurements. The optimum sintering conditions, relating the degree of alignment and bulk magnetic properties, were identified based on the resulting magnetic properties. It was found that one must strike a balance between the degree of crystallite alignment for high saturation magnetisation and coercivity (Hc) to gain the highest energy product (BHmax). It was found that the coercive field drops when the crystallite alignment increases. This was particularly pronounced in the case of magnetically pre-aligned powders prior to SPS, where Hc and BHmax decreased as the pellets became increasingly textured. The best BHmax value of 29(4) kJ m−3 was found for the sample sintered at 950 °C for 2 minutes with an applied pressure of 100 MPa for a powder pre-aligned in an applied field of 0.55 T. The results presented here show the potential of SPS consolidation of SrFe12O19 with high relative densities and emphasize the effect of the degree of alignment on the decrease of coercive field and its influence on the magnetic performance., European Commission through the Research and Innovation project AMPHIBIAN, grant agreement H2020-NMBP-2016-720853. Support is also greatly acknowledged from the Independent Research Fund Denmark project-1 (Magnetic Nanocomposites). M. C. wishes to express his gratitude towards the Carlsbergfondet for a Distinguished Associate Professor Fellowship. The Danish National Research Foundation (Center for Materials Crystallography, DNRF93) is likewise thanked for support and access to instrumental facilities. Affiliation with the Center for Integrated Materials Research (iMAT) at Aarhus University is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic phase diagram, magnetotransport and inverse magnetocaloric effect in the noncollinear antiferromagnet Mn5Si3

  • Luccas, Roberto F.
  • Sanchez-Santolino, Gabriel
  • Correa-Orellana, Alex
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Suderow, Hermann
[EN] The antiferromagnet MnSi has recently attracted attention because a noncollinear spin arrangement has been shown to produce a topological anomalous Hall effect and an inverse magnetocaloric effect. Here we synthesize single crystals of MnSi using flux growth. We determine the phase diagram through magnetization and measure the magnetoresistance and the Hall effect. We find the collinear and noncollinear antiferromagnetic phases at low temperatures and, in addition, a third magnetic phase, in between the two antiferromagnetic phases. The latter magnetic phase might be caused by strain produced by Cu inclusions. This suggests that fluctuations of the mixed character magnetic ordering in this compound can be easily quenched by stress., This work was supported by the Spanish MINECO (Consolider Ingenio Molecular Nanoscience CSD2007-00010 program, FIS2017-84330-R, MDM-2014-0377, MAT2014-52405-C2-2-R, FJCI-2015-25427 and CSD2009-00013), by the Comunidad de Madrid throughprogram NANOMAGCOST-CM (S2018 NMT-4321) and MAD2D-CM(S2013/MIT-3007) and by EU (Graphene Core1 contract No. 696656, Nanopyme FP7-NMP-2012 SMALL-6NMP3-SL 2012310516 and COSTCA16218).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unraveling structural and magnetic information during growth of nanocrystalline SrFe12O19

  • Granados-Miralles, Cecilia
  • Saura-Múzquiz, Matilde
  • Bøjesen, Espen D.
  • Jensen, Kirsten M. Ø.
  • Andersen, Henrik L.
  • Christensen, Mogens
[EN] The hydrothermal synthesis of magnetic strontium hexaferrite (SrFe12O19) nanocrystallites was followed in situ using synchrotron powder X-ray diffraction. For all the studied temperatures, the formation of SrFe12O19 happened through an intermediate crystalline phase, identified as the so-called six-line ferrihydrite (FeOOH). The presence of FeOOH has been overlooked in previous studies on hydrothermally synthesized SrFe12O19, despite the phase having a non-trivial influence on the magnetic properties of the final material. The chemical synthesis was successfully reproduced ex situ in a custom-designed batch-type reactor that resembles the experimental conditions of the in situ setup, while allowing larger quantities of material to be produced. The agreement in phase composition between the two studies reveals comparability between both experimental setups. Hexagonal platelet morphology is confirmed for SrFe12O19 combining Rietveld refinements of powder X-ray diffraction (PXRD) data with transmission electron microscopy (TEM). Room temperature magnetization curves were measured on the nanopowders prepared ex situ. The magnetic properties are discussed in the context of the influence of phase composition and crystallite size., The authors would like to thank financial support from the European Commission through the project NANOPYME FP7-NMP-2012-SMALL-6 NANOPYME (No. 310516). The work was likewise supported by the Danish National Research Foundation (Center for Materials Crystallography, DNRF93) and the Danish Research Council for Nature and Universe (Danscatt). Furthermore, support by the European Community's Seventh Framework Programme (FP7/2007-2013) CALIPSO under Grant Agreement No. 312284 is also acknowledged. Support is also gratefully accepted from the Danish Research Council for Technology and Production Sciences through a Sapere Aude grant (Improved Permanent Magnets through Nanostructuring)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Energy product enhancement in imperfectly exchange-coupled nanocomposite magnets

  • Quesada, Adrián
  • Granados-Miralles, Cecilia
  • López-Ortega, Alberto
  • Erokhin, Sergey
  • Lottini, Elisabetta
  • Pedrosa, Javier
  • Bollero, Alberto
  • Aragón Sánchez, Ana María
  • Rubio Marcos, Fernando
  • Stingaciu, Marian
  • Bertoni, Giovanni
  • Julián Fernández, César de
  • Sangregorio, Claudio
  • Fernández Lozano, José Francisco
  • Berkov, Dmitry
  • Christensen, Mogens
[EN] Interfacial exchange coupling is known to improve the permanent magnetic performance (i.e., maximal energy product) in composites of magnetically hard and soft particles. The prevailing strategy, employed in a plethora of compositions, consists in maximizing the coupling between the hard and soft phases and optimizing material parameters such as particle size or phase composition. In CoFeO–FeCo nanocomposites, it is experimentally shown that interparticle uncoupling in combination with the sizes of the soft phase grains below the single-domain threshold leads to enhanced magnetic properties at room temperature, while maximizing exchange coupling implies a collapse in coercivity and hence in the maximal energy product. The results are corroborated by micromagnetic calculations and the origin of the exchange-induced softening is discussed. It is emphasized that engineering interfaces in order to optimize, rather than maximize, the degree of exchange coupling are a necessary requirement to improve the energy product in nanocomposite magnets and to successfully develop advanced rare-earth-free permanent magnets., Financial support from the European Commission through the project NANOPYME FP7-NMP-2012-SMALL-6 NANOPYME (n° 310516), and from the Spanish Ministerio de Economía y Competitividad through Project MAT2013-48009-C4-1-P. F.R.M. is also indebted to MINECO for a ‘‘Juan de la Cierva’’ contract (ref: JCI-2012-14521), which is co-financed with European Social Found.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Mössbauer and magnetic properties of coherently mixed magnetite-cobalt ferrite grown by infrared pulsed-laser deposition

  • Figuera, Juan de la|||0000-0002-7014-4777
  • Quesada, Adrian
  • Martín García, Laura|||0000-0001-5743-4473
  • Sanz, Mikel
  • Oujja, Mohamed|||0000-0003-3757-4043
  • Castillejo, Marta
  • Mascaraque, Arantzazu
  • N'Diaye, Alpha T.|||0000-0001-9429-9776
  • Foerster, Michael|||0000-0002-4147-6668
  • Aballe, Lucía|||0000-0003-1810-8768
  • Marco, José F.
We have studied the magnetic properties and the composition of cobalt ferrite single crystal films on SrTiO: Nb grown by infrared pulsed-laser deposition. Mössbauer spectra have been recorded from both the target used to grow the films and the films themselves. The Mössbauer spectra of the target taken at low temperatures show a strong dependence of the recoil free fraction of the octahedral sites with temperature. The films composition, with a coexistence of Co-enriched cobalt ferrite and magnetite, has been estimated assuming a similar ratio of the recoil free fractions of the films. X-ray absorption and x-ray magnetic circular dichroism measurements confirm the valence composition of the film and show ferromagnetic Fe-Co coupling in the films with a coercive field around 0.5 T at room temperature. The combination of these characterization techniques allows establishing the coherent structural and magnetic properties of this biphase system.