Pasar al contenido principal

PROCESADO AVANZADO POR LASER PARA SINTESIS Y MODIFICACION DE MATERIALES EN LA MICRO- Y NANOESCALA

CTQ2016-75880-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 34
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nonlinear imaging microscopy for assessing structural and photochemical modifications upon laser removal of dammar varnish on photosensitive substrates

  • Oujja, Mohamed
  • Psilodimitrakopoulos, Sotiris
  • Carrasco, Esther
  • Sanz, Mikel
  • Philippidis, A.
  • Selimis, A.
  • Pouli, P.
  • Filippidis, G.
  • Castillejo, Marta
The nonlinear optical microscopy (NLM) modalities of Multi-Photon Excited Fluorescence (MPEF) and Third Harmonic Generation (THG) have been combined in this work to characterize as a function of depth with micrometric resolution the type and extent of morphological and photochemical modifications that take place upon ultraviolet (UV) pulsed laser removal of a dammar varnish layer applied on a photosensitive substrate. The latter consists on a layer of the synthetic polymer polymethyl methacrylate doped with a photosensitizer, the aromatic compound 1,4-di[2-(5-phenyloxazolyl)] benzene, that strongly fluoresces upon UV light illumination. A number of laser conditions for partial or total elimination of the varnish coating were explored, namely different wavelengths (266, 248 and 213 nm) and pulse durations, in the nanosecond, picosecond and femtosecond ranges. Changes in the MPEF signals upon laser ablation of the outermost varnish layer successfully signpost photochemical modifications of the varnish or of the photosensitive under-layer, and their dependence with the laser ablation parameters, i.e., wavelength and pulse duration. In turn, THG signals mark the presence of layer boundaries and the reduction by laser ablation of the thickness of the varnish coating. The obtained MPEF and THG data are complemented by morphological observation by optical microscopy and measurements of laser induced fluorescence and micro-Raman spectra of the samples before and after laser ablation at the selected laser irradiation conditions. The results acquired through these nondestructive NLM imaging techniques serve to understand the phenomena that are induced upon laser ablation and to determine the best operating conditions that ensure controlled removal of the varnish with minimal morphological and chemical modifications to the under-layers. This research is of direct application to the UV pulsed laser cleaning of paintings and demonstrates the potential of NLM as a novel assessment tool for non-destructive, on line monitoring of the laser cleaning process., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

X-ray and ion irradiation effects on azurite, malachite and alizarin pictorial models

  • Carrasco, Esther
  • Oujja, Mohamed
  • Sanz, Mikel
  • Marco, J.F.
  • Castillejo, Marta
The analysis by intense radiation sources of painting materials used in artworks gives valuable information about their composition and state of conservation, but it can also induce undesired modifications on the studied substrates. Here we use X-ray photoelectron spectroscopy (XPS) to follow the surface chemical changes that prolonged irradiation with soft X-rays (with maximum doses ranging from ~ 1.2x1017 to ~ 3.4x1017 photons cm-2) produce on azurite, malachite and alizarin pigments and on two egg-yolk temperas containing azurite or alizarin. The effects following exposure to Argon ion irradiation have been also studied for malachite and azurite tempera. XPS spectra of the samples show that both types of radiation induce similar superficial alterations, although, at the selected experimental conditions, the modification rate is slower for exposure to soft X-rays. The highest radiation stability is shown for alizarin and, on the contrary, azurite and malachite experience a progressive chemical reduction of Cu2+ to Cu+. The reduction of copper takes also place in the azurite tempera, while the proteins and lipids of the egg-yolk binder of azurite and alizarin temperas are subjected to degradation by irradiation with photons and ions. By employing XPS, the cleavage of C-N, C-O(H) and C=O bonds has been identified in the egg-yolk temperas., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser induced periodic surface structures on polymer nanocomposites with carbon nanoadditives

  • Rodríguez-Beltrán, René, I.
  • Paszkiewicz, S.
  • Szymczyk, A.
  • Roslaniec, Z.
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Castillejo, Marta
  • Moreno, Pablo
  • Rebollar, Esther
7 pags., 7 figs., tab., Laser induced periodic surface structures (LIPSS) are formed on poly(trimethylene terephthalate) and its composites with single-walled carbon nanotubes (SWCNT) and with both SWCNT and expanded graphite (EG) upon irradiation with a Q-Switched Nd:YAG laser (266 nm, 8 ns). The morphology of the polymer films was characterized by atomic force microscopy. A cantilever with a colloidal probe was used to obtain information about surface adhesion. Surface energies were estimated by contact angle measurements using different liquids. Chemical modification in the materials upon irradiation was assessed by Raman spectroscopy. Results show a dependence of the number of pulses required for LIPSS formation as a consequence of the presence of the carbon nanoadditive and an increase of the hydrophilic character of surfaces after irradiation. Moreover, the polar component of the surface free energy changes significantly and surface adhesion increases by the addition of the additive to the polymer matrix. Additionally, the adhesion force decreases after laser nanostructuring as a consequence of a lower contact area in the nanostructured material., The authors gratefully acknowledge financial support from the MINECO (FIS2013-44174-P, MAT2014-59187-R, MAT2015-66443-C02-1-R, FIS2015-71933-REDT, CTQ2016- 75880-P) and Junta de Castilla y León (Project SA046U16). RIR is grateful for the International Scholarship number 314197 provided by Consejo Nacional de Ciencia y Tecnología (CONACyT-México) and E.R. thanks MINECO for a Ramón y Cajal contract (RYC- 2011-08069)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Strong laser field control of fragment spatial distributions from a photodissociation reaction

  • Corrales, M.E.
  • de Nalda, R.
  • Bañares, Luis
The notion that strong laser light can intervene and modify the dynamical processes of matter has been demonstrated and exploited both in gas and condensed phases. The central objective of laser control schemes has been the modification of branching ratios in chemical processes, under the philosophy that conveniently tailored light can steer the dynamics of a chemical mechanism towards desired targets. Less explored is the role that strong laser control can play on chemical stereodynamics, i.e. the angular distribution of the products of a chemical reaction in space. This work demonstrates for the case of methyl iodide that when a molecular bond breaking process takes place in the presence of an intense infrared laser field, its stereodynamics is profoundly affected, and that the intensity of this laser field can be used as an external knob to control it., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Nanophase Separation in Laser Induced Periodic Surface Structures (LIPSS) on Bulk Heterogeneous Photovoltaic Thin Films as Revealed by Resonant Soft X-ray Scattering

  • Rodríguez-Rodríguez, Álvaro
  • García-Gutiérrez, Mari Cruz
  • Ezquerra, Tiberio A.
  • Brady, M. A.
  • Wang, C.
  • Rebollar, Esther
Madrid from October 9-11, 2017. -- https://w3.ual.es/Congresos/AUSE/CONGRESO2017/index_congreso.html, This work has been supported by Spanish Ministry of Economy and Competitiveness under the projects MAT2014-59187-R, MAT2015-66443-C02-1-R and CTQ2016-75880-P. E.R. and A.R-R thank MINECO for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069) and FPI (BES-2013-062620) contracts, respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Detecting molecular changes in UV laser-ablated oil/diterpenoid resin coatings using micro-Raman spectroscopy and Laser Induced Fluorescence

  • Ciofini, Daniele
  • Oujja, Mohamed
  • Cañamares, María Vega
  • Siano, Salvatore
  • Castillejo, Marta
Naturally occurring diterpenoid resins were extensively applied, mainly as oily mixtures, through the ages as protective and decorative coatings on paintings, metals and wood artifacts. When these coatings age, tend to generate tougher films than triterpenoid resins, completely insoluble, increasingly subject to darkening, and then very hard to remove using conventional methods. In this regards, laser sub-micrometric ablative techniques are being increasingly used in the cultural heritage field also for the treatment of synthetic and natural polymer coatings. Here, in the wake of the positive outcomes achieved on triterpenoid resin films, the present approach has been applied and extended to diterpenoid resin coatings, which have never been thoroughly studied yet. In detail, colophony, sandarac and Manila copal resin films, prepared as solvent and linseed oil formulations, were subject to light-ageing and then systematically irradiated at various exposure conditions using the 4th (266 nm) and 5th (213 nm) harmonics of a Q-Switched Nd:YAG laser. UV–Vis absorption spectroscopy was used as preliminary characterization of the films optical properties. The assessment of physico-chemical modifications induced by artificial light-ageing and ns UV laser irradiation were assessed non-invasively by μ-Raman spectroscopy, Laser Induced Fluorescence (LIF) and microscopic examination. The results underlined that, due to the presence of a polymer network, sandarac and copal resin coatings showed higher F than those composed of colophony. Morphologically, all the coatings were subject to bubbling upon 266 nm irradiation, while damage-free at 213 nm. At molecular level, irradiation at 266 nm produced minor changes to ν(CH)/ν(CH), ν(C[dbnd]O) and ν(C[dbnd]C) modes, thus confirming an ablation mechanism mainly driven by photo-thermal bond-breaking through the ejection of gaseous by-products. Raman background fluctuations along with shifting and broadening of LIF maxima were supportive in the assessment of laser-induced surface modifications. Finally, the work performed indicates that the 213 nm wavelength is the most indicated for the treatment of aged solvent and oil diterpenoid-based coatings, as no side effects occurred. This outcome, corroborated by the previous results obtained in triterpenoid resin films, may have important implications in the field of cultural heritage conservation, as it extends the application range of solid-state Nd:YAG lasers to all types of protective and decorative terpenoid coatings., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of wavelength, deposition temperature and substrate type on cobalt ferrite thin films grown by pulsed laser deposition

  • Oujja, Mohamed
  • Martín-García, Laura
  • Rebollar, Esther
  • Quesada, Adrián
  • García García-Tuñón, Miguel Ángel
  • Fernández Lozano, José Francisco
  • Marco, J.F.
  • de la Figuera, Juan
  • Castillejo, Marta
  • AMPHIBIAN Project ID:720853
In pulsed laser deposition, the laser irradiation wavelength and the substrate nature and temperature crucially affect the composition, crystallinity, structure and magnetic properties of the grown deposits. In this work, cobalt ferrite (CoFeO) thin films were deposited on Si (1 0 0) and SrTiO (1 0 0) single crystal substrates at room temperature and 770 K using laser wavelengths of 213, 532 and 1064 nm. The deposited films were characterized by atomic force microscopy to determine the surface morphology, by X-ray diffraction to examine their crystallinity, and by micro-Raman, scanning electron microscopy/energy-dispersive X-ray spectroscopy, X-ray photoelectron and Mössbauer spectroscopies to investigate their composition and stoichiometry. Magnetic characterization was carried out by superconducting quantum interference device magnetometry. At 770 K and 1064 nm, the films consisted of single-crystal CoFeO ((1 0 0) orientation) when grown on SrTiO, and of polycrystalline CoFeO when grown on Si. The composition of the films became more complex at shorter wavelengths as they contained magnetite and other minority phases in different concentrations. The crystalline quality of the films also decreased with decreasing wavelength even including superparamagnetic species. In general, for the same wavelength, the deposits obtained at room temperature were less crystalline than those produced with the substrate heated at 770 K., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through Projects CTQ2016-75880-P, CTQ2013-43086-P and MAT2015-64110-C2-1-P. M. O. and E. R. thank CSIC and RYC-2011-08069 (Ramón y Cajal Programme) for contracts. We thank CSIC Intramural Project PIE 201560E068 and financial support from the European Commission through the project NANOPYME FP7-NMP-2012-SMALL-6 NANOPYME (n° 310516) and AMPHIBIAN H2020-NMBP-2016-720853. W, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multidimensional analysis of time-resolved charged particle imaging experiments

  • Loriot, V.
  • Bañares, Luis
  • de Nalda, R.
We present a tutorial to realize a multidimensional fitting procedure capable of extracting all the relevant information contained in a sequence of charged particle images acquired as a function of time in femtosecond pump–probe experiments. The images are reproduced using a 3D fitting method, which provides the velocity (or center-of-mass kinetic energy) and angular distributions contained in the images and their time evolution. A detailed example of the method is shown through the analysis of the time-resolved predissociation dynamics of CH3I on the B-band origin (Gitzinger et al., J. Chem. Phys.2010, 133, 234313). We show that the multidimensional approach is essential for the analysis of complex images that contain several overlapping contributions where reduced dimensionality analyses cannot provide a reliable description of the features present in the image sequence. This methodology can be generalized to many types of multidimensional data analysis., This work has been supported by the Spanish Ministry of Economy and Competitiveness (Grants CTQ2015-65033-P and CTQ2016-75880-P). This research has been carried out within the Unidad Asociada Química Física Molecular between Departamento de Química Física of Universidad Complutense de Madrid and CSIC. The facilities provided by the CLUR (Centro de Láseres Ultrarrápidos) are gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synergistic Effect of Fullerenes on the Laser-Induced Periodic Surface Structuring of Poly(3-Hexyl Thiophene)

  • Rodríguez-Rodríguez, Álvaro
  • Gutiérrez-Fernández, Edgar
  • García-Gutiérrez, Mari Cruz
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
Ordered and homogeneous laser-induced periodic surface structures (LIPSS) could be fabricated in poly(3-hexyl thiophene):[6,6]-phenyl C71-butyric acid methyl ester (P3HT:PC71BM) blends by using wavelengths in the ultraviolet (UV) range (266 nm). The absorption coefficient of PC71BM, which is maximum in its UV–Visible absorption spectrum around 266 nm, enhanced the overall absorption of the blend. In addition, PC71BM itself was capable of developing homogeneous LIPSS by laser irradiation at λlaser = 266 nm. Therefore, we proposed that the synergistic effect of PC71BM on the LIPSS formation in P3HT:PC71BM (1:1) was due to a templating effect for the LIPSS formation of the PC71BM itself, which added to the overall increment of the absorption of the blend. LIPSS formation at ambient conditions in this wavelength range led to chemical modification of both P3HT and PC71BM, which rendered to non-conducting samples. Irradiation in vacuum significantly reduced radiation damage, rendering to the characteristic electrical conductivity pattern observed in P3HT LIPSS samples irradiated in the visible range. This effect could be of potential interest in order to obtain LIPSS in low absorbing polymers., This work has been supported by the Spanish Ministry of Economy and Competitiveness under the projects MAT2014-59187-R, MAT2015-66443-C02-1-R and CTQ2016-75880-P. E.R. thanks MINECO for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laterally-resolved mechanical and tribological properties of laser-structured polymer nanocomposites

  • Rodríguez-Beltrán, René I.
  • Martínez-Tong, Daniel E.
  • Reyes-Contreras, Adela
  • Paszkiewicz, Sandra
  • Szymczyk, Anna
  • Ezquerra, Tiberio A.
  • Moreno, Pablo
  • Rebollar, Esther
In this work, we report on a detailed quantitative nanomechanical mapping of free-standing films of poly(ethylene terephthalate) (PET) and the composite PET/expanded graphite (EG) with 0.4% in weight of the nanoadditive, and of these materials nanostructured by laser irradiation. By using atomic force microscopy, we obtained simultaneously the topography, surface elastic modulus and adhesion force maps of the materials. Young’s modulus images exhibited higher values for the composite in comparison to those of the neat polymer and for the nanostructured films in contrast to the non-nanostructured ones. Additionally, we explored the tribological properties of these systems at the nanoscale. Using lateral force microscopy, we observed a decrease in the friction coefficient for the nanocomposite as compared to the neat polymer, while quantifying an increase for both laser-structured samples. Our results are discussed taking into consideration the possible changes that the samples might undergo during processing, as well as the changes imposed by the complex geometry of the nanometric features in these laterally-resolved mechanical measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional nanostructured surfaces induced by laser on fullerene thin films

  • Gutiérrez-Fernández, Edgar
  • Rodríguez-Rodríguez, Álvaro
  • García-Gutiérrez, Mari Cruz
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
We report a method to produce nanosecond pulsed laser induced periodic surface structures (LIPSS) on spin-coated [6,6]‑phenyl C71-butyric acid methyl ester (PCBM) films exhibiting a photoinduced resist-free imprinting (PRI) property. LIPSS in PCBM are resist free and can be solvent developed, under certain conditions, leaving the laser illuminated zone as an undissolved residue. LIPSS prepared with a wavelength of 532 nm selectively preserve the electrical conductivity on the LIPSS valleys. The heterogeneous conducting pattern consisting in conducting valleys and less conducting hills observed in the LIPSS has been interpreted as due to a reduction in the crystallinity of the hills provoked by the fast heating/cooling process induced by every laser pulse. On the basis of the experiments we propose that irradiated PCBM films: i) suffer a fast heating/cooling process tending to reduce the overall crystallinity of the LIPSS and therefore decreasing the electrical conductivity of the hills while leaving a remnant conducting film underneath the hills, ii) during laser irradiation the sample suffers a heat treatment leading to the development of a buried phase with enhanced crystallinity, close to the silicon substrate, formed by larger crystals with enhanced electrical conductivity and iii) further solvent treatment reveals the buried phase which remains in the form of partially electrically conducting nanowires. These results point towards the potential use of the described technology for nanofabrication of organic electronic devices., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multianalytical non-invasive characterization of phthalocyanine acrylic paints through spectroscopic and non-linear optical techniques

  • Fovo, A.D.
  • Oujja, Mohamed
  • Sanz, Mikel
  • Martínez-Hernández, A.
  • Cañamares, María Vega
  • Castillejo, Marta
  • Fontana, R.
The documentation and monitoring of cleaning operations on paintings benefit from the identification and determination of thickness of the materials to be selectively removed. Since in artworks diagnosis the preservation of the object's integrity is a priority, the application of non-invasive techniques is commonly preferred. In this work, we present the results obtained with a set of non-invasive optical techniques for the chemical and physical characterization of six copper-phthalocyanine (Cu-Pc) acrylic paints. Cu-Pc pigments have been extensively used by artists over the past century, thanks to their properties and low cost of manufacture. They can also be found in historical paintings in the form of overpaints/retouchings, providing evidence of recent conservation treatments. The optical behaviour and the chemical composition of Cu-Pc paints were investigated through a multi-analytical approach involving micro-Raman spectroscopy, Fibre Optics Reflectance Spectroscopy (FORS) and Laser Induced Fluorescence (LIF), enabling the differentiation among pigments and highlighting discrepancies with the composition declared by the manufacturer. The applicability of Non Linear Optical Microscopy (NLOM) for the evaluation of paint layer thickness was assessed using the modality of Multi-photon Excitation Fluorescence (MPEF). Thickness values measured with MPEF were compared with those retrieved through Optical Coherence Tomography (OCT), showing significant consistency and paving the way for further non-linear stratigraphic investigations on painting materials., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bulk and surface characterisation of micrometer-thick cobalt ferrite films grown by IR PLD

  • Sánchez-Arenillas, M.
  • Oujja, Mohamed
  • Moutinho, Fernando
  • de la Figuera, Juan
  • Cañamares, María Vega
  • Quesada, Adrián
  • Castillejo, Marta
  • Marco, J.F.
  • AMPHIBIAN Project ID:720853
We have studied micrometer-thick cobalt ferrite films deposited on Si (1 0 0) single crystal substrates by nanosecond pulsed laser deposition at 1064 nm.The thickness of the deposited films (1.3 μm) was monitored by AFM. The chemical and structural characterisation of the films was carried out by Raman spectroscopy and transmission Mössbauer spectroscopy at 300 and 26 K. For comparison purposes, transmission Mössbauer data at these two temperatures were also recorded from a commercial cobalt ferrite powder and the home-made target used to grow the films. The surface characterisation was performed by X-ray Photoelectron Spectroscopy (XPS) and Integral Low Energy Electron Spectroscopy (ILEEMS). XPS showed Co and Fe to be present as Co and Fe, as expected for cobalt ferrite. The Raman spectra showed the lines characteristic of cobalt ferrite. The Mössbauer spectra, both in the transmission and backscattering modes, were fitted to two sextets whose hyperfine parameters are in good agreement with those expected from Fe cations occupying the tetrahedral and octahedral sites in the spinel-related structure. No significant differences were observed in the relative areas of the two sextets in the transmission and ILEEMS spectra, suggesting that the cation distribution at the surface and the bulk are not too different. However, the relative areas of the two components changed drastically with temperature both in the spectra of the films as in those recorded from the cobalt ferrite standards. We discuss the possible origin of the evolution with temperature of those relative areas., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through Projects CTQ2016-75880-Pand MAT2015-64110-C2-1-P and by the European Commission through the project AMPHIBIAN H2020-NMBP-2016-720853, Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Resonant soft x-ray scattering unravels the hierarchical morphology of nanostructured bulk heterojunction photovoltaic thin films

  • Rodríguez-Rodríguez, Álvaro
  • García-Gutiérrez, Mari Cruz
  • Ezquerra, Tiberio A.
  • Brady, M. A.
  • Wang, C.
  • Rebollar, Esther
Resonant soft x-ray scattering at the carbon K edge is shown to be an unambiguous approach to evaluate the phase segregation between donor and acceptor phases across the grooves of a laser-induced periodic surface nanostructure on a paradigmatic poly(3-hexylthiophene)/fullerene bulk heterojunction. By taking advantage of the use of polarized soft x rays, the results provide direct evidence that the formation of the nanostructure on the surface of the heterojunction induces not only additional phase separation of the two components but also a preferential directional arrangement of the different phases., The authors gratefully acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness (MINECO) through Projects MAT2014-59187-R, MAT2015-66443-C02 1-R and CTQ2016-75880-P. A.R.-R. and E.R. are indebted to MINECO for a FPI (BES-2013-062620) and Ramón y Cajal (RYC-2011-08069) contracts, respectively. This research used resources of the Advanced Light Source, which is a DOE Office of Science User Facility under contract no. DEAC02- 05CH11231, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence of anomalous switching of the in-plane magnetic easy axis with temperature in Fe3O4 film on SrTiO3:Nb by v-MOKE and ferromagnetic resonance

  • Cuñado, J. L. F.
  • Camarero, J.
  • Pedrosa, F.J.
  • Nemes, Norbert Marcel
  • Sanz, Mikel
  • Oujja, Mohamed
  • Rebollar, Esther
  • Marco, J.F.
  • de la Figuera, Juan
  • Monti, Matteo
  • Castillejo, Marta
  • Feher, T.
  • Nafradi, B.
  • Forró, L.
  • Bollero, A.
7 pags., 6 figs., The evolution of the magnetic anisotropy directions has been studied in a magnetite (FeO) thin film grown by infrared pulsed-laser deposition on SrTiO(100):Nb substrate. The magnetic easy axes at room temperature are found along the in-plane 〈100〉 film directions, which means a rotation of the easy axis by 45° with respect to the directions typically reported for bulk magnetite and films grown on single-crystal substrates. Moreover, when undergoing the Verwey transition temperature, T, the easy axis orientation evolves to the 〈110〉 film directions. This anomalous behavior has been demonstrated by measuring first the angular dependence of coercivity and remanence well above and below T by high-resolution vectorial magneto-optical Kerr effect (v-MOKE). Ferromagnetic resonance (FMR) measurements have additionally proven a well-defined fourfold magnetic anisotropy induced during growth with confirmed easy axis directions along 〈100〉 for T > T and 〈110〉 for T < T. These results provide a clear proof of the possibility of tuning magnetic anisotropy in FeO thin films by proper control on the growth parameters and substrate choice., This research was supported by the Regional Government of Madrid through NANOMAGCOST project (P2018/NMT-4321) and by the Spanish Ministry of Economy and Competitiveness (MINECO) through Project CTQ2016-75880-P. M. O. thanks CSIC for contract and E. R. thanks MINECO for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069). The work in Lausanne was supported by the Sinergia grant “Mott physics beyond the Heisenberg model” of the Swiss NSF. The work in BUTE (Hungary) was supported by NKFIH Grant No. K119442 and 2017-1.2.1-NKP-2017-00001, and by the BME-Nanotechnology FIKP grant of EMMI (BME FIKP-NAT). IMDEA Nanoscience is supported by the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D, MINECO [grant number SEV-2016-0686]
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Form and magnetic birefringence in undulated Permalloy/PET films

  • Arranz, Miguel A.
  • Sánchez, Elena H.
  • Rebollar, Esther
  • Castillejo, Marta
  • Colino, José M.
10 pags., 6 figs., We report the measurement of form and magnetic birefringence in Permalloy (Ni80Fe20) films grown on rippled Poly(Ethylene Terephthalate), PET, substrates. Prior to Permalloy deposition, Laser Induced Periodic Surface Structures (LIPSS) were generated on the polymeric substrate by a nanosecond laser beam, developing an ordered rippled nanostructure. Due to their high transparency factor, we could investigate the behavior of linear polarized light transmitting at normal incidence on Permalloy/PET sample. The results show the existence of an optical axis parallel to the ripples direction, which yields an strong form birefringence effect arising from the laser patterning. Concerning the Permalloy thin film, the study of its in-plane magnetization was carried out measuring the Voigt magnetooptical effect. The obtained data in our samples reveal the appearance of two different mechanisms to reverse the magnetization, as the external magnetic field is parallel or perpendicular to the ripples direction. Accordingly, the transmitted light shows a magnetic birefringence depending on the relative orientation between the ripple direction, i.e. the optical axis of the LIPSS, and the in-plane magnetization of the Permalloy film., Spanish Ministry of Economy and Competitiveness, MINECO, (MAT2015-65295-R and CTQ2016-75880-P).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Imaging spectroscopy of Ag plasmas produced by infrared nanosecond laser ablation

  • Camacho, J.J.
  • Oujja, Mohamed
  • Sanz, Mikel
  • Martínez-Hernández, A.
  • López-Quintas, Ignacio
  • de Nalda, R.
  • Castillejo, Marta
9 pags., 11 figs., Spatially and temporally resolved optical emission spectroscopy has been used to study plasmas formed by 1064 nm pulsed laser ablation of silver targets in a vacuum. Ag and Ag+ species were mapped as a function of both locations from the surface of the target and time from the laser pulse. Plasma parameters such as temperature and electron density were measured from the spatiotemporal analysis. We examined the properties of Ag resonance and non-resonance emission lines and Ag+ ions. The results show a faster decay of the continuum emission and Ag+ species than in the case of neutral Ag atoms. Higher velocities and a narrower temporal distribution of Ag+ are observed in a vacuum when compared to Ag atoms. Electron temperature was assessed from the comparison of the Ag atomic/ionic Saha-local thermodynamic equilibrium spectrum with experimental ones at various delay times from the laser pulse incidence. An initial electron temperature of 2 eV and electron density of 2 × 1018 cm−3 were measured from the spatially integrated spectra., This research was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through Project CTQ2016-75880-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantitative assessment by local probe methods of the mechanical and electrical properties of inkjet-printed PEDOT:PSS thin films over Indium Tin Oxide substrates

  • Gutiérrez-Fernández, Edgar
  • Gabaldón-Saucedo, I.A.
  • García-Gutiérrez, Mari Cruz
  • Varea, A.
  • Nogales, Aurora
  • Rebollar, Esther
  • Vilà, A.
  • Ezquerra, Tiberio A.
  • Cirera, A.
6 pags., 8 figs., Thin films of Poly(3,4-ethylenedioxythiophene)complexed with Poly(styrenesulfonate)(PEDOT:PSS)on Indium Tin Oxide (ITO)have been prepared by inkjet printing technology. The process allows obtaining thin films over large areas. A relatively broad range of thicknesses can be obtained by the addition of subsequent polymer layers resembling an additive manufacturing process. The resulting inkjet PEDOT:PSS films are homogeneous as regard both electrical and mechanical properties. In spite of the characteristic parallel line topography of these inkjet printed films, both the Quantitative Nanomechanical Mapping (QNM)and the Conductive-Atomic Force Microscope (C-AFM)characterization reveal homogeneous values throughout the polymer surface regardless of the welding zones. The results discussed in this work provide the basis for the application of inkjet printing as deposition method for electrically conducting PEDOT:PSS into a large area with mechanical stability., This work has been supported by Ministry of Science, Innovation and Universities (MCIU, Spain) under the projects MAT2014-59187-R, MAT2015-66443-C02-1-R and CTQ2016-75880-P. E.R. thanks MCIU for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069). We thank Daniel Hermida for valuable technical support during measurements at BM26 at ESRF (Grenoble, France).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Non-linear laser microscopies for non-destructive analysis of paintings

  • Sanz, Mikel
  • Oujja, Mohamed
  • Dal Fovo, A.
  • Martínez-Hernández, A.
  • Fontana, R.
  • Castillejo, Marta
TechnoHeritage 2019, Seville, March 26-30, 2019, Non-invasive, high resolution 3D analysis techniques are very much sought for the characterization of multilayer, multicomponent substrates, as the ones often encountered in artworks and objects of cultural heritage. The nonlinear optical interaction of ultrashort laser pulses with a sample is the basis of several modalities of nonlinear optical microscopy (NLOM), a family of techniques which has been recently introduced for the study of paintings, parchment, textiles and corrosion layers over metallic substrates among others (i.e. Phys. Chem. Chem. Phys., 2017, 19, 22836). NLOM relies on near-IR, femtosecond laser excitation of transparent materials to simultaneously induce, with 3D micrometric resolution and depending on the optical properties of the sample, multiphoton excitation fluorescence (MPEF) and second and third harmonic generation (SHG, THG) signals. MPEF emission is related to the sample chemical composition, SHG identifies the presence of non¿centrosymmetric structures and THG allows imaging interfaces between optically dissimilar materials. Here, we present the application of the MPEF modality of NLOM to study painting substrates (varnished painting mock-ups and model acrylics paints) using a custom-made laser scanning microscope (set-up sketched in the Figure) based on a Ti:Sapphire laser oscillator (wavelength of 800 nm, repetition rate of 80 MHz and pulses of 70 femtoseconds). MPEF measurements were supported by morphological and chemical assessment of paint layers by optical coherence tomography (OCT) and by linear laser-induced fluorescence and micro-Raman spectroscopies. The results obtained pave the way for further non-linear stratigraphic investigations on paintings. Acknowledgements This work is funded by projects IPERION-CH (H2020-INFRAIA-2014-2015, nº 654028), Geomateriales 2- CM (S2013/MIT-2914) and CTQ2016-75880-P (MINECO, Spain)., This work is funded by projects IPERION-CH (H2020-INFRAIA-2014-2015, nº 654028), Geomateriales 2- CM (S2013/MIT-2914) and CTQ2016-75880-P (MINECO, Spain).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Quantitative mechanical and electrical assessment by local probe methods of inkjet-printed PEDOT:PSS thin films

  • Gutiérrez-Fernández, Edgar
  • Gabaldón, I. A.
  • García-Gutiérrez, Mari Cruz
  • Varea, A.
  • Nogales, Aurora
  • Rebollar, Esther
  • Vila, A.
  • Cirera, T.
  • Ezquerra, Tiberio A.
APS March Meeting, Boston, MA, March 4-8, 2019. -- https://www.aps.org/meetings/meeting.cfm?name=MAR19, This work has been supported by Spanish MINECO under the projects MAT2014-59187-R, MAT2015-66443-C02-1-R and CTQ2016-75880-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In-Depth Analysis of Egg-Tempera Paint Layers by Multiphoton Excitation Fluorescence Microscopy

  • Fovo, A.D.
  • Sanz, Mikel
  • Oujja, Mohamed
  • Fontana, Raffaella
  • Mattana, Sara
  • Cicchi, Riccardo
  • Targowski, Piotr
  • Sylwestrzak, Marcin
  • Romani, Aldo
  • Grazia, Chiara
  • Filippidis, George
  • Psilodimitrakopoulos, Sotiris
  • Lemonis, Andreas
  • Castillejo, Marta
© 2020 by the authors., The non-invasive depth-resolved imaging of pictorial layers in paintings by means of linear optical techniques represents a challenge in the field of Cultural Heritage (CH). The presence of opaque and/or highly-scattering materials may obstruct the penetration of the radiation probe, thus impeding the visualization of the stratigraphy of paintings. Nonlinear Optical Microscopy (NLOM), which makes use of tightly-focused femtosecond pulsed lasers as illumination sources, is an emerging technique for the analysis of painted objects enabling micrometric three-dimensional (3D) resolution with good penetration capability in semi-transparent materials. In this work, we evaluated the potential of NLOM, specifically in the modality of Multi-Photon Excitation Fluorescence (MPEF), to probe the stratigraphy of egg-tempera mock-up paintings. A multi-analytical non-invasive approach, involving ultraviolet-visible-near infrared (UV-Vis-NIR) Fiber Optics Reflectance Spectroscopy, Vis-NIR photoluminescence, and Laser Induced Fluorescence, yielded key-information for the characterization of the constituting materials and for the interpretation of the nonlinear results. Furthermore, the use of three nonlinear optical systems allowed evaluation of the response of the analyzed paints to different excitation wavelengths and photon doses, which proved useful for the definition of the most suitable measurement conditions. The micrometric thickness of the paint layers, which was not measurable by means of Optical Coherence Tomography (OCT), was instead assessed by MPEF, thus demonstrating the effectiveness of this nonlinear modality in probing highly-scattering media, while ensuring the minimal photochemical disturbance to the examined materials., This research was funded by the European H2020 IPERION CH Project (Integrated Platform for the European Research Infrastructure ON Cultural Heritage (GA 654028, WP6); Spanish State Research Agency (AEI) and European Regional Development (FEDER) through Project CTQ2016-75880-P-AEI/FEDER, UE; and TOP Heritage-CM (S2018/NMT-4372) from the Community of Madrid and with the support of Plataforma Temática Interdisciplinar of CSIC “Patrimonio Abierto: Investigación y Sociedad” (PTI-PAIS)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Coulomb explosion imaging to map nonadiabatic molecular dynamics

  • de Nalda, R.
  • Corrales, M.E.
  • González-Vázquez, J.
  • Bañares, Luis
IMAMPC2019, Madrid, 11 - 14 June, 2019, Funding from MINECO (Spain) through grants CTQ2015-65033-P and CTQ2016-75880-P is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Mapping nonadiabatic molecular dynamics with time-resolved Coulomb explosion images

  • de Nalda, R.
  • Corrales, M.E.
  • González-Vázquez, J.
  • Bañares, Luis
USTS 2019, Madrid, Spain, 06 - 08 November, 2019, Funding from MINECO (Spain) through grants CTQ2015-65033-P and CTQ2016-75880-P is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser-Induced Periodic Surface Structuring of Poly(trimethylene terephthalate) Films Containing Tungsten Disulfide Nanotubes

  • Prada-Rodrigo, Javier
  • Rodríguez-Beltrán, René, I.
  • Paszkiewicz, S.
  • Szymczyk, A.
  • Ezquerra, Tiberio A.
  • Moreno, Pablo
  • Rebollar, Esther
© 2020 by the authors., We report the study of the formation of Laser Induced Periodic Surface Structures (LIPSS), with UV femtosecond laser pulses (λ = 265 nm), in free-standing films of both Poly(trimethylene terephthalate) (PTT) and the composite PTT/tungsten disulfide inorganic nanotubes (PTT-WS2). We characterized the range of fluences and number of pulses necessary to induce LIPSS formation and measured the topography of the samples by Atomic Force Microscopy, the change in surface energy and contact angle using the sessile drop technique, and the modification in both Young’s modulus and adhesion force values with Peak Force-Quantitative Nanomechanical Mapping. LIPSS appeared parallel to the laser polarization with a period close to its wavelength in a narrow fluence and number of pulses regime, with PTT-WS2 needing slightly larger fluence than raw PTT due to its higher crystallinity and heat diffusion. Little change was found in the total surface energy of the samples, but there was a radical increase in the negative polar component (γ−). Besides, we measured small variations in the samples Young’s modulus after LIPSS formation whereas adhesion is reduced by a factor of four. This reduction, as well as the increase in γ−, is a result of the modification of the surface chemistry, in particular a slight oxidation, during irradiation., This work has been supported by the Spanish Ministry of Science and Innovation by the projects MAT2015-66443-C02-1-R (MINECO/FEDER, UE), CTQ2016-75880-P (AEI/FEDER, UE) and FIS2017-87970-R. J.P.-R and P.M. acknowledge support from Junta de Castilla y León (Project SA287P18). J.P.-R thanks the Spanish Ministry of Universities for the FPU grant with reference: FPU17/01859., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Femtochemistry under scrutiny: Clocking state-resolved channels in the photodissociation of CH3I in the A-band

  • Murillo-Sánchez, M. L.
  • González-Vázquez, J.
  • Corrales, M.E.
  • de Nalda, R.
  • Martínez-Núñez, E.
  • García Vela, Alberto
  • Bañares, Luis
15 pags, 11 figs., 3 tabs., Clocking of electronically and vibrationally state-resolved channels of the fast photodissociation of CH3I in the A-band is re-examined in a combined experimental and theoretical study. Experimentally, a femtosecond pump-probe scheme is employed in the modality of resonant probing by resonance enhanced multiphoton ionization (REMPI) of the methyl fragment in different vibrational states and detection through fragment velocity map ion (VMI) imaging as a function of the time delay. We revisit excitation to the center of the A-band at 268 nm and report new results for excitation to the blue of the band center at 243 nm. Theoretically, two approaches have been employed to shed light into the observations: first, a reduced dimensionality 4D nonadiabatic wavepacket calculation using the potential energy surfaces by Xie et al. [J. Phys. Chem. A 104, 1009 (2000)]; and second, a full dimension 9D trajectory surface-hopping calculation on the same potential energy surfaces, including the quantization of vibrational states of the methyl product. In addition, high level ab initio electronic structure calculations have been carried out to describe the CH3 3pz Rydberg state involved in the (2 + 1) REMPI probing process, as a function of the carbon-iodine (C¿I) distance. A general qualitative agreement is obtained between experiment and theory, but the effect of methyl vibrational excitation in the umbrella mode on the clocking times is not well reproduced. The theoretical results reveal that no significant effect on the state-resolved appearance times is exerted by the nonadiabatic crossing through the conical intersection present in the first absorption band. The vibrationally state resolved clocking times observed experimentally can be rationalized when the (2 + 1) REMPI probing process is considered. None of the other probing methods applied thus far, i.e., multiphoton ionization photoelectron spectroscopy, soft X-ray innershell photoelectron spectroscopy, VUV single-photon ionization, and XUV core-to-valence transient absorption spectroscopy, have been able to provide quantum state-resolved (vibrational) clocking times. More experiments would be needed to disentangle the fine details in the clocking times and dissociation dynamics arising from the detection of specific quantum-states of the molecular fragments., M.L.M.-S. acknowledges financial support through a predoctoral contract from Universidad Complutense de Madrid. M.E.C. is grateful to the Spanish MINECO for a contract through Programa de Técnicos de Apoyo a Infraestructuras. This work was financially supported by the Spanish MINECO and MICIU (Grant Nos. CTQ2016-75880-P, FIS2016-77889-R, and PGC2018-096444- B-I00). This research was carried out within the Unidad Asociada Química Física Molecular between the Departamento de Química Física of Universidad Complutense de Madrid and CSIC. The facilities provided by the Center for Ultrasfast Lasers of Universidad Complutense de Madrid are acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Anisotropy engineering of soft thin films in the undulated magnetic state

  • Sánchez, E. H.
  • Rodriguez-Rodriguez, G.
  • Aragón, R.
  • Arranz, M. A.
  • Rebollar, Esther
  • Castillejo, Marta
  • Colino, J.M.
8 pags., 6 figs., Advanced materials often involve multi-dependent approaches, merging electrical, optical and magnetic responses in nanostructured systems. To this purpose we have explored a semi-transparent, soft magnetic thin film (Permalloy) of nano-undulated morphology with which uniaxial anisotropy can be induced and tuned. This media is grown on the ripple surface of flexible, polymeric foil of polyethylene terephthalate (PET) that was previously patterned by a versatile pulsed-laser irradiation technique achieving a linear array with periodicity 220–250 nm and large amplitudes around 45 nm. Vectorial Kerr (reflection) as well as Voight (transmission) magneto-optical effects confirm a complete uniaxial anisotropy induced with easy axis along the ripple pattern for Py films of thickness ranging from 10 to 30 nm. Analysis of curved magnetic systems is a major challenge, so we need to combine measurements of surface magnetization with thorough micromagnetic modelling of a quasi-infinite ripple film (same dimensions as the media). Remarkably, our modelling indicates unique features confirmed by experiments; namely, two disparate demagnetizing fields in hard axis magnetization and a distinctive thickness evolution. These findings are characteristic of an undulated magnetic state with the uniaxial anisotropy driven by volume-like poles. The choice of large pattern dimensions has made possible to realize the undulated state where the anisotropy strength can simply be tuned with film thickness without any role of surface contributions. This approach to anisotropy engineering provides ground for applications design without the limitations of surface preparation., The authors gratefully acknowledgefinancial support from the Spanish Ministry of Economy and Competitiveness, MINECO, (grantsnumber: MAT2015-65295-R and CTQ2016-75880-P). E.R. also thanksMINECO for a Ramón y Cajal contract (RYC-2011-08069)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wrinkling poly(trimethylene 2,5-furanoate) free-standing films: Nanostructure formation and physical properties

  • Soccio, Michelina
  • Lotti, Nadia
  • Munari, Andrea
  • Rebollar, Esther
  • Martínez-Tong, Daniel E.
Polymer nanostructures were developed on fully bio-based poly(trimethylene furanoate) (PTF) films, by using the technique of Laser Induced Periodic Surface Structures (LIPSS). We found that irradiation times between 1 and 8 min allowed the formation of periodic and nanometric ripples, when using an UV pulsed laser source at a fluence of 8 mJ/cm2. The wrinkled surfaces were studied by a combined macro- and nanoscale approach. We evaluated possible physicochemical changes taking place on the polymer surface after irradiation by infrared spectroscopy, contact angle measurements and atomic force microscopy. The macroscopic properties of PTF showed almost no changes after nanostructure formation, differently from the results previously found for the terephthalic counterparts, as poly(ethylene terephthalate), PET, and poly(trimethylene terephthalate), PTT. At the nanoscale, the surface mechanical properties of the nanostructured PTF were found to be improved, as evidenced by force spectroscopy measurements. In particular, stiffer surfaces characterized by an increased Young's modulus were measured for the nanostructured sample., This work has been supported by Ministry of Science, Innovation and Universities (MCIU, Spain) under the project CTQ2016-75880-P. D.E.M. acknowledges the financial support obtained through the Post-Doctoral fellowship “Juan de la Cierva – Incorporación” (IJCI-2017-31600, MCIU, Spain). E.R. thanks MCIU for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser nanostructuring of thin films of PEDOT:PSS on ITO: Morphology, molecular structure and electrical properties

  • Gutiérrez-Fernández, Edgar
  • Gabaldón, I. A.
  • Rodríguez-Rodríguez, Álvaro
  • Solano, Eduardo
  • García-Gutiérrez, Mari Cruz
  • Nogales, Aurora
  • Cirera, A.
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
7 pags., 7 figs., 1 tab., Nanostructuring is one promising alternative to modify the functionalities of conducting polymers aiming atapplications in technologies like organic solar cells, organicfield-effect transistors and organic light-emittingdiodes. Nowadays, there is an increasing interest in alternative ways of nanostructuring more economic, quickerand reproducible, avoiding the necessity of stringent environmental conditions like clean rooms, high vacuum orcomplex mask fabrication. Here we prove that Laser Induced Periodic Surface Structures (LIPSS) can be formedinfilms of Poly(3,4-ethylenedioxythiophene) complexed with Poly(styrenesulfonate) (PEDOT:PSS) prepared byspin-coating on planar Indium Tin Oxide. PEDOT:PSS has been irradiated with the 4th harmonic of a Nd:YAGlaser resulting in LIPSS parallel to the laser polarization with a period close to the laser wavelength. LIPSSmorphology has been characterized by Atomic Force Microscopy (AFM) and synchrotron Grazing IncidenceSmall Angle X-ray Scattering while thefilm structure was studied by Grazing-Incidence Wide-Angle X-rayScattering and Raman spectroscopy. To analyze the impact of laser treatment on the electrical properties ofPEDOT:PSS, conductive AFM was employed showing that LIPSS partially preserve the original electrical con-ductivity. These results can be of interest for achieving functional polymer nanostructures by a quick and re-producible approach with no need for clean room conditions., This work has been supported by Ministry of Economy and Competitiveness (MINECO, Spain), Spanish State Research Agency(AEI) and European Regional Development (FEDER) under the projects MAT2014-59187-R, MAT2015-66443-C02-1-R-MINECO/FEDER, UEand CTQ2016-75880-P-AEI/FEDER, UE. E.R. also thanks for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069). GISAXS and GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Safe limits for the application of nonlinear optical microscopies to cultural heritage: A new method for in-situ assessment

  • Dal Fovo, A.
  • Sanz, Mikel
  • Mattana, S.
  • Oujja, Mohamed
  • Marchetti, M.
  • Pavone, F.S.
  • Cicchi, R.
  • Fontana, R.
  • Castillejo, Marta
9 pags., 6 figs., 2 tabs., Nonlinear optical microscopies (NLOM) are emerging techniques for the monitoring and preservation of cultural heritage, providing morphological, structural and compositional information on a large variety of artistic materials and objects. Being non-invasiveness the main requirement in artwork diagnostics, it becomes increasingly necessary to verify the absence of physicochemical alterations possibly induced by the use of high intensity radiation sources, and thus to find the exposure limits for safe applications. In this work, we propose a new methodology to set the criteria of damage evaluation for near infrared femtosecond pulsed lasers used for examining painted samples by means multi-photon excited fluorescence (MPEF), modality of NLOM. The method is based on the detection of changes in the MPEF signal upon repetitive irradiation on a series of modern acrylic painted samples, complemented by Raman spectroscopy measurements performed before and after irradiation. The obtained results allowed determining a safe average laser power range for the non-invasive determination of thickness in paint layers., The research leading to these results was funded by the EU Community's H2020 Research Infrastructure program under theIPERION CH Project (GA 654028), by the Spanish State Research Agency (AEI) and European Regional Development (FEDER) through Project CTQ2016-75880-P-AEI/FEDER,UE,by program TOP Heritage-CM (S2018/NMT-4372) from the Community of Madrid and by Plataforma Tem�tica Interdisciplinar of CSIC ?Patrimonio Abierto:Investigaci�n y Sociedad?(PTI-PAIS).MC is grateful for a Salvador deMadariaga mobility grant (PRX18/00029
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical diagnostics of gold plasmas produced by infrared laser ablation

  • Oujja, Mohamed
  • Camacho, J.J.
  • Sanz, Mikel
  • Castillejo, Marta
  • de Nalda, R.
10 pags., 8 figs., 1 tab., Laser plasmas produced by ablation of a gold target in a vacuum are spatially and temporally characterized by optical emission spectroscopy. A Nd:YAG laser (1064 nm, pulse width 15 ns and fluences of 5.8 and 11 J/cm) is used to ablate the Au target. Au, Au and Auspecies were studied both as a function of the location from the target surface and of the time delay from the laser pulse arrival. Plasma temperature, electron density and average velocities were measured from the spatiotemporal analysis. The results show a faster decay of the continuum emission, Au and Au species than in the case of neutral Au atoms. Higher velocities and a narrower temporal distribution of Au ions are observed when compared to Au atoms. Electron temperature was evaluated from the comparison of Au atomic-Boltzmann local thermodynamic equilibrium spectra with experimental ones at various delay times from the laser pulse incidence. Electron densities and electron temperatures approximately decrease from 2.3 to 1.1 × 10 cm and from 1.6 to 0.4 eV, respectively, as the delay time increases along the first 2 µs of plasma evolution., This research was supported by the Spanish State Research Agency (AEI) and the European Regional Development (FEDER) through Projects CTQ2016-75880-P-AEI/FEDER, PID2019-104124RB-I00/AEI/10.13039/501100011033 and PID2019-106125GB-I00/AEI/10.13039/501100011033; the European H2020 IPERION HS Project (Integrated Platform for the European Research Infrastructure ON Heritage Science) (GA 871034, WP5); TOP Heritage-CM (S2018/NMT-4372) project from the Community of Madrid and with the support of Plataforma Temática Interdisciplinar of CSIC “Patrimonio Abierto: Investigación y Sociedad” (PTI-PAIS). M. O. thanks CSIC for contract.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spatiotemporally resolved optical emission spectroscopy and harmonic generation in Cu plasmas

  • Oujja, Mohamed
  • Camacho, J.J.
  • Sanz, Mikel
  • López-Quintas, Ignacio
  • Castillejo, Marta
  • de Nalda, R.
9 pags., 6 figs., Laser-induced ablation plasmas of Cu generated by nanosecond 1064 nm pulses have been examined as media for third harmonic generation of a nanosecond driving pulse. A narrow window of ablation fluences where third harmonic generation is optimized has been identified in a region around twice the ablation threshold. A detailed analysis of the features of the Cu plasma across this critical fluence window, through spatially and temporally resolved optical emission spectroscopy, has been used to assess critical plasma parameters such as temperature, electron density, and abundance of Cu species in different ionization stages. This description has been correlated with the conditions for optimum low-order harmonic generation in the Cu plasma., This research was supported by the Spanish Agencia Estatal de Investigaci on (AEI) and the European Regional Development (FEDER) through Projects CTQ2016-75880-P-AEI/FEDER, PID2019-106125GB- I00/AEI/10.13039/501100011033 and PID2019-104124RB-I00/AEI/ 10.13039/501100011033 and by Community of Madrid by project TOP Heritage-CM (S2018/NMT-4372). M. O. thanks CSIC for contract.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Laser Interactions with Organic/Polymer Materials

  • Rebollar, Esther
  • Castillejo, Marta
Laser light irradiation of organic or polymeric materials leads to a wide range of controlled physical and chemical modifications in the micro-and nanoscales. Laser pulses, with wavelengths from the ultraviolet to the infrared, with duration in nanosecond, picosecond, and femtosecond temporal domains, may remove material from the surface by ablation, induce swelling of the irradiated region, or generate patterns of different sizes and geometries, using methods which involve multiple laser beams or nanoparticle-mediated effects. Laser-induced chemical modifications of organic or polymeric substrates are at the basis of very important and technologically relevant processes such as laser lithography, fabrication of nanocomposites, or 3D photopolymerization. Laser irradiation also serves for transferring organic and polymeric materials from bulk to thin films, and different advanced techniques have been applied, or specifically developed, for polymeric soft, light-sensitive materials, as is the case of pulsed laser deposition, laser-induced forward transfer, or matrix-assisted methods. This chapter introduces the most important laser irradiation and laser transfer techniques that are nowadays applied to organic and polymeric materials, describes some of the attempts to interpret and model the main underlying mechanisms, and reviews relevant applications of the laser-modified substrates., Thanks are given to Spanish Ministry of Science, Innovation and Universities (MCIU) for funding under the project CTQ2016-75880-P. E.R. also thanks the tenure of a Ramón y Cajal contract (No. RYC-2011-08069). M.C. acknowledges support from Project PRX18/00029 (MCIU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Observation of middle-sized metal clusters in femtosecond laser ablation plasmas through nonlinear optics

  • Oujja, Mohamed
  • Izquierdo, J. G.
  • Bañares, L.
  • de Nalda, R.
  • Castillejo, Marta
10 pages, 8 figures, Femtosecond laser ablation of solids is known to produce ejection of material to a large extent composed of particles of nanometer dimensions for a broad variety of targets. This work explores the ultrashort laser ablation of metal targets (Ag, Cu, Al, Mn) through non-conventional diagnostics based on the nonlinear response of the transient medium created upon ablation. The full temporal mapping of the nonlinear response constitutes a useful flag that signals the abundance of clusters and nanoparticles in the plume. The use of this method for diagnosis has allowed us to perform direct observation of middle-sized aggregates that are extremely elusive with other techniques. Additionally, one crucial and seldom explored parameter in this context has been identified: the ablation laser spot size. Optimum conditions for overall nanoparticle generation as well as relative nanoparticle/cluster/atom ratios have been found., Funding from MINECO, Spain, through project CTQ201675880-P is gratefully acknowledged. Thanks are given to and CLUR (UCM) for providing access to research facilities. M. O. thanks CSIC for a contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Nonlinear optics in laser ablation plasmas

  • Oujja, Mohamed
  • Sanz, Mikel
  • de Nalda, R.
  • Castillejo, Marta
Chapter 13, 25 pages, 12 figures, This chapter describes current research on the nonlinear optical response, specifically low-order harmonic generation, of nanosecond laser ablation plumes of solid targets. The spatiotemporal control of the driving laser with respect to the position and time of the ablation event allows for the differentiation of distinct populations of species and enables the in situ diagnosis of complex ablation plume environments., The authors thank funding from the Spanish Ministerio de Economía, Industria y Competitividad (Projects CTQ2013-43086-P and CTQ2016-75880-P). M.O. thanks CSIC for a contract., Peer reviewed