Pasar al contenido principal

ESTUDIO Y CONSERVACION DEL PATRIMONIO CULTURAL CON LASERES

PID2019-104124RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optical diagnostics of gold plasmas produced by infrared laser ablation

  • Oujja, Mohamed
  • Camacho, J.J.
  • Sanz, Mikel
  • Castillejo, Marta
  • de Nalda, R.
10 pags., 8 figs., 1 tab., Laser plasmas produced by ablation of a gold target in a vacuum are spatially and temporally characterized by optical emission spectroscopy. A Nd:YAG laser (1064 nm, pulse width 15 ns and fluences of 5.8 and 11 J/cm) is used to ablate the Au target. Au, Au and Auspecies were studied both as a function of the location from the target surface and of the time delay from the laser pulse arrival. Plasma temperature, electron density and average velocities were measured from the spatiotemporal analysis. The results show a faster decay of the continuum emission, Au and Au species than in the case of neutral Au atoms. Higher velocities and a narrower temporal distribution of Au ions are observed when compared to Au atoms. Electron temperature was evaluated from the comparison of Au atomic-Boltzmann local thermodynamic equilibrium spectra with experimental ones at various delay times from the laser pulse incidence. Electron densities and electron temperatures approximately decrease from 2.3 to 1.1 × 10 cm and from 1.6 to 0.4 eV, respectively, as the delay time increases along the first 2 µs of plasma evolution., This research was supported by the Spanish State Research Agency (AEI) and the European Regional Development (FEDER) through Projects CTQ2016-75880-P-AEI/FEDER, PID2019-104124RB-I00/AEI/10.13039/501100011033 and PID2019-106125GB-I00/AEI/10.13039/501100011033; the European H2020 IPERION HS Project (Integrated Platform for the European Research Infrastructure ON Heritage Science) (GA 871034, WP5); TOP Heritage-CM (S2018/NMT-4372) project from the Community of Madrid and with the support of Plataforma Temática Interdisciplinar of CSIC “Patrimonio Abierto: Investigación y Sociedad” (PTI-PAIS). M. O. thanks CSIC for contract.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spatiotemporally resolved optical emission spectroscopy and harmonic generation in Cu plasmas

  • Oujja, Mohamed
  • Camacho, J.J.
  • Sanz, Mikel
  • López-Quintas, Ignacio
  • Castillejo, Marta
  • de Nalda, R.
9 pags., 6 figs., Laser-induced ablation plasmas of Cu generated by nanosecond 1064 nm pulses have been examined as media for third harmonic generation of a nanosecond driving pulse. A narrow window of ablation fluences where third harmonic generation is optimized has been identified in a region around twice the ablation threshold. A detailed analysis of the features of the Cu plasma across this critical fluence window, through spatially and temporally resolved optical emission spectroscopy, has been used to assess critical plasma parameters such as temperature, electron density, and abundance of Cu species in different ionization stages. This description has been correlated with the conditions for optimum low-order harmonic generation in the Cu plasma., This research was supported by the Spanish Agencia Estatal de Investigaci on (AEI) and the European Regional Development (FEDER) through Projects CTQ2016-75880-P-AEI/FEDER, PID2019-106125GB- I00/AEI/10.13039/501100011033 and PID2019-104124RB-I00/AEI/ 10.13039/501100011033 and by Community of Madrid by project TOP Heritage-CM (S2018/NMT-4372). M. O. thanks CSIC for contract.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multiphoton excitation fluorescence microscopy and spectroscopic multianalytical approach for characterization of historical glass grisailles

  • Oujja, Mohamed
  • Agua Martínez, Fernando
  • Morales-Martín, D.
  • García Heras, Manuel
  • Villegas Broncano, María Ángeles
  • Castillejo, Marta
12 pags., 5 figs., 4 tabs., The preservation of the integrity of artworks and cultural heritage items during characterization and conser-vation operations is of high priority, therefore, the application of non-invasive techniques is commonly suggested and recommended. Nonlinear optical microscopies (NLOM), based on the use of tightly focused pulsed femto-second lasers, are emerging techniques for structural and chemical analysis of heritage objects with micrometric lateral and axial resolution. The results obtained with a set of optical and spectroscopic techniques for the chemical and physical characterization of grisaille paint layers on historical stained glasses, from different chronologies and provenance in Spain, are presented in this work. Optical behaviour and chemical composition were investigated by NLOM, using a laboratory set-up in the modality of Multi-Photon Excitation Fluorescence (MPEF), and by a multi-analytical combination of Field Emission Scanning Electron Microscopy-Energy Dispersive X-ray Spectrometry (FESEM-EDS), Laser Induced Breakdown Spectrosocopy (LIBS) and Laser Induced Fluorescence (LIF). Thicknesses values of the historical grisaille paint layers measured with MPEF were compared with those retrieved through FESEM, showing significant consistency and agreement. Under proper conditions, analysis via MPEF microscopy avoids the photochemical and physical damage to the examined materials, thus ensuring their preservation. This approach paves the way for future in-situ, non-invasive strati-graphic investigations on cultural heritage objects., This research has been funded by the Spanish State Research Agency (AEI) through projects PID2019-104124RB-I00/AEI/10.13039/ 501100011033 and PID2019-104220RB-I00/AEI/10.13039/ 501100011033, by project TOP Heritage-CM (S2018/NMT-4372) from Community of Madrid, by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Her-itage Science, GA 871034) and supported by CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI-PAIS). M.O. thanks CSIC for a contract. Finally, the authors acknowledge profes-sional support from the TechnoHeritage Network of Science and Tech-nology for the Conservation of Cultural Heritage., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for the paper “Oujja, M., Agua, F., Sanz, M., Morales-Martín, D., García-Heras, M., Villegas M.A., Castillejo, M. 2021. Multiphoton Excitation Fluorescence Microscopy and Spectroscopic Multianalytical Approach for Characterization of Historical Glass Grisailles. Talanta 230, 122314”

  • Oujja, Mohamed
  • Agua Martínez, Fernando
  • Sanz, Mikel
  • Morales-Martín, D.
  • Carmona-Quiroga, Paula
  • García Heras, Manuel
  • Villegas Broncano, María Ángeles
  • Castillejo, Marta
Laser-induced Breakdown Spectrocopy (LIBS) analyses of glass without grisaille (body surface) and the grisaille itself were performed using laser excitation at 266 nm (Nd:YAG laser, 6 ns pulses, 10 Hz repetition rate; Quantel Brilliant) and a 0.30 m spectrograph with a 1200 grooves/mm grating (TMc300 Bentham) coupled to an intensified charged coupled detector (ICCD, 2151 Andor Technologies). The fluence was of 6.6 J cm− 2. LIBS spectra were recorded with a gate delay and width of 100 ns and 3 μs, respectively. For the Laser-induced Fluorescence (LIF) analyses, the same equipment described above was used. However, time gate was operated with a zero-time delay, the grating was 300 lines/mm and the number of accumulations of 25. The fluence was 6 × 10− 3 J cm− 2. A home-made nonlinear optical microscope (NLOM) was used for Multi-Photon Excitation Fluorescence (MPEF) measurements of grisaille thickness with a mode-locked Ti:Sapphire femtosecond laser. The laser emits at 800 nm, with an average power of 680 mW, delivering 70 fs pulses at a repetition rate of 80 MHz and a laser power of 6–9 mW. The laser beam was modulated using a chopper at a frequency of 130 Hz and conducted to the sample through the aperture of a microscope objective lens (M Plan Apo HL 50X, Mitutoyo, NA 0.42). The focal plane of the laser was selected with motorized translation XYZ stages (Standa 8MVT100-25-1 for XY and Standa 8MTF for Z). In-depth cross section imaging of carbon coated glasses decorated with grisaille paint was carried out by Field Emission Scanning Electron Microscope (FESEM) with a Hitachi S-4800 cold cathode equipment, working with acceleration voltage of 15 kV. An Oxford X-Max of 20 mm2 system coupled to the electron microscope with resolution of 125 eV (Mg Kα) was used for Energy Dispersive X-Ray Spectroscopy (EDS) microanalyses. More details of the experimental conditions are available in their respective data folder. Data life: 2021- (unlimited validity). This dataset is subject to a Creative Commons Attribution 4.0 International (CC BY 4.0) License., This is the experimental dataset used in the paper Talanta, 230: 122314 (2021) (http://hdl.handle.net/10261/244443) in which the thickness and composition of grisaille paints in four Spanish historical stained glasses, named Balmaseda (A; 19th century), Girona (B; 18th century), Leon (C; 13th century) and Goyeneche (D; early 20th century) after their place of origin, have been determined. The samples are glass fragments without value for their replacement available from previous conservation works made by some of the authors. This data set includes the results of the chemical and physical characterization of grisaille with a set of optical and spectroscopic techniques, including non-invasive techniques such as the emerging Nonlinear Optical Microscopy (NLOM) in the modality of Multi-Photon Excitation Fluorescence (MPEF). This allows determining the thicknesses values of the historical grisaille paint layers on the basis of their intrinsic fluorescence without photochemical and physical damage. The results obtained (FWHM values of depth scan after refractive index correction) show significant consistency and agreement with those obtained from traditional Field Emission Scanning Electron Microscope (FESEM) in which mean thickness varies between 26-78 µm. Scanning Electron Microscope coupled with Energy Dispersive X-Ray Spectroscopy (FESEM-EDS) and Laser Induced Breakdown Spectrosocopy (LIBS) show the elemental composition of both the body glass and the grisaille paint in the 4 samples according to the respective emission lines of the main and minor components. And finally, Laser Induced Fluorescence (LIF) provides complementary information (fluorescence species)., We acknowledge financial support from the Spanish State Research Agency (AEI) through projects PID2019-104124RB-I00/AEI/10.13039/501100011033 and PID2019-104220RB-I00/AEI/10.13039/501100011033; from the Community of Madrid through project TOP Heritage-CM (S2018/NMT-4372); from European Union’s Horizon 2020 through IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034) project and CSIC through M.O.’s contract., dc.description.tableofcontentsLIBS folder: LIBS_readme; LIBS_A-glass; LIBS_A-grisaille; LIBS_B-glass; LIBS_ B-grisaille; LIBS_C-glass; LIBS_C-grisaille; LIBS_D-glass; LIBS_D_grisailleLIF folder: LIF_readme; LIF_A-glass; LIF_A-grisaille; LIF_B-glass; LIF_B-grisaille; LIF_C-glass; LIF_C-grisaille; LIF_D-glass; LIF_D-grisailleNLOM folder: NLOM_readme; NLOM_A-grisaille_l; NLOM_A-grisaille_h; NLOM_B-grisaille_l; NLOM_B-grisaille_h; NLOM_C-grisaille_l; NLOM_C-grisaille_h; NLOM_D-grisaille_l; NLOM_D-grisaille_hFESEM-EDS folder: FESEM-EDS_readme; EDS_A-grisaille; EDS_B-grisaille; EDS_C-grisaille; EDS_D-grisaille; FESEM_A-grisaille; FESEM_B-grisaille; FESEM_C-grisaille; FESEM_D-grisaillePHOTOS folder: Photos_redame; A-glass_grisaille; B-glass_grisaille; C-glass_grisaille; D-glass_grisaille O, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nonlinear optical microscopy for artworks physics

  • Dal Fovo, A.
  • Castillejo, Marta
  • Fontana, Raffaella
46 pags., 22 figs., Nonlinear optical microscopies (NLOMs) are innovative techniques recently introduced in the field of cultural heritage for the non-invasive in-depth analysis of artworks. In this review, we report on the state-of-the-art of NLOMs on different artistic materials, i.e., varnish, glue, paint, wood, parchment, and metal, and we evaluate the potential and capabilities of NLOMs in comparison with other more established linear optical techniques. We also discuss the latest studies defining suitable measurement conditions and instrumental requirements for the safe and in situ application of NLOMs on real cases., This research has been funded by Regione Toscana (POR FSE 2014-2020, “Giovanisì”, Intervention Program “CNR4C”, CUP B15J19001040004), by the Spanish State Research Agency (AEI) through project PID2019-104124RB-I00/ AEI /1.0.13039/501100011033, by the TOP Heritage-CM (S2018/NMT-4372) program, by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034) and is supported by CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI-PAIS)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Characterization of medieval-like glass alteration layers by laser spectroscopy and nonlinear optical microscopy

  • Oujja, Mohamed
  • Palomar Sanz, Teresa
  • Martínez-Weinbaum, Marina
  • Martínez-Ramírez, S.
  • Castillejo, Marta
22 pags., 7 figs., 3 tabs., Historical glass-based objects undergo, since the time of their manufacture, different degradation phenomena that are related to their composition and to the environment to which they were exposed. Three-dimensional (3D) structural and chemical characterization of the degradation layers is important to select the most adequate conservation strategies for glass objects. Optical microscopy (OM) is the most frequently used non-destructive method to examine the surface of historical glasses; however, the 3D structural assessment of alteration layers requires applying the destructive modality of this technique to conduct a cross-sectional study. In this work, a different approach for structural and compositional characterization of alteration layers on model medieval-like glasses is presented, based on the combination of the laser spectroscopies of laser-induced breakdown spectroscopy (LIBS), laser-induced fluorescence (LIF) and FT-Raman, and the emerging, cutting edge technique of nonlinear optical microscopy (NLOM) in the modality of multiphoton excitation fluorescence (MPEF). The results obtained through this multi-analytical photonic approach were compared with those retrieved by examination of the surface and cross sections of the samples by OM and scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM–EDS). While the combination of LIBS, LIF and FT-Raman served to assess the composition of the various alteration layers, the use of MPEF microscopy allowed the non-destructive determination of the thicknesses of these layers, showing for both thickness and composition a good agreement with the OM and SEM–EDS results. Thus, the proposed approach, which avoids sample preparation, illustrates the capability of non-destructive, or micro-destructive in the case of LIBS, laser spectroscopies and microscopies for the in situ study of glass objects of historic or/and artistic value., This research has been funded by the Spanish State Research Agency (AEI) through projects PID2019-104124RB-I00/AEI/1013039/501100011033, the CSIC General Foundation (ComFuturo Programme), by project TOP Heritage-CM (S2018/NMT-4372) from Community of Madrid, by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). Support by CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI-PAIS) is acknowledged. M.O. thanks CSIC for a contract. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Laser spectroscopies and microscopies for research in cultural heritage, Espectroscopías y microscopías láser para la investigación del patrimonio cultural

  • Oujja, Mohamed
  • Sanz, Mikel
  • Castillejo, Marta
  • Detalle, Vincent
  • Dal Fovo, A.
  • Fontana, Raffaella
Laser spectroscopies, including Raman, laser induced fluorescence (LIF) and laser induced breakdown spectroscopy (LIBS) have been used for decades for the analysis of materials and substrates of artistic interest. Raman and LIBS provide complementary information on molecular and elemental composition, respectively, while LIF gives additional data related to the presence of fluorescence emitting substances. Most recently introduced in the study of cultural heritage is the technique of nonlinear optical microscopy (NLOM), which in its modalities of multi-photon excitation fluorescence (MPEF) and generation of second or third harmonic (SHG, THG) serve for threedimensional characterization with micrometric precision, without sampling, of the chemical nature, structure and thickness of mutilayer and multicomponent substrates. In this work, recent advances in the integration of the three mentioned laser spectroscopies and different modalities of NLOM in various types of hybrid systems are illustrated, showing their use for morphological and chemical characterization of pictorial and stone based substrates., Las espectroscopías láser, incluyendo Raman, fluorescencia inducida por láser (LIF) y espectroscopía de ruptura inducida por láser (LIBS), se utilizan desde hace décadas para el análisis de materiales y sustratos de interés artístico o patrimonial. Raman y LIBS proporcionan información complementaria sobre la composición molecular y elemental, respectivamente, mientras que LIF aporta datos adicionales relacionados con la presencia de sustancias emisoras de fluorescencia. De más reciente introducción en el estudio del patrimonio cultural es la microscopía óptica no lineal (NLOM), que, en sus modalidades de fluorescencia de excitación multifotónica (MPEF) y de generación de segundo o tercer armónico (SHG, THG), sirven para la caracterización, tridimensional, sin toma de muestra y precisión micrométrica, de la naturaleza química, estructura y espesor de substratos multicapa y multicomponente. En este trabajo se ilustran avances recientes en la integración de las tres espectroscopías láser mencionadas y de las distintas modalidades de NLOM en sistemas híbridos y sobre su uso en la caracterización morfológica y química de substratos pétreos y pictóricos., This work has been funded by the Spanish project PID2019-104124RB-I00/AEI/10.13039/501100011033), the EU projects «Integrated Platform for the European Research Infrastructure on Cultural Heritage» (IPERION-CH, Ref. H2020-INFRAIA-2014-2015, GRANT n° 654028), «Integrating Platforms for the European Research Infrastructure ON Heritage Science» IPERION HS, Ref. H2020-INFRAIA-2018-2020, GRANT n.° 871034), and by program TOP Heritage-CM (S2018/ NMT-4372) from the Community of Madrid. M.O. thanks CSIC for a contract and M.C. to Project PRX18/00029 (Estancia Salvador de Madariaga, Ministerio de Ciencia, Innovación y Universidades), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Emission characteristics and dynamics of neutral, ionic and molecular species in a laser produced CaF2 plasma

  • Oujja, Mohamed
  • Camacho, J.J.
  • Paradela, D.
  • Castillejo, Marta
  • de Nalda, R.
15 pags., 12 figs., The emission characteristics of a laser-ablated calcium fluoride CaF plasma have been investigated using time and space optical emission spectroscopy. The plasma-plume was produced by focusing 266 nm, 15 ns pulses from a Nd: YAG laser on a calcium fluoride crystal substrate placed in a vacuum chamber. The emission observed in the plasma region is due to electronic relaxation of excited neutral Ca and F, ionic fragments Ca, Ca and F and molecular features of CaF (AΠ- XΣ, BΣ- XΣ and CΠ- XΣ) band systems. Plasma species were analyzed both as a function of the delay from the laser pulse incidence and location from the target surface. Spectroscopic diagnostics were employed to estimate time-resolved electron densities, electron temperatures and velocity expansion of different species. The results show a faster decay of the continuum emission, ionic F, Ca, Ca, F species than in the case of neutral Ca atoms and molecular species of CaF. Different excitation temperatures were measured by comparing Ca and F atomic/ionic Saha-local thermodynamic equilibrium (LTE) spectra with experimental ones at various delay times after the ablation event. Vibrational temperatures of CaF were assessed from the temporal analysis of the AΠ - XΣ Δv = 0 band sequence molecular emission. We observed a non-equilibrium plasma although the plasma is found to maintain partial LTE., This research was supported by the Spanish State Research Agency (AEI) and the European Regional Development (FEDER) through Projects PID2019-104124RB-I00/AEI/10.13039/501100011033 and PID2019-106125GB-I00/AEI/10.13039/501100011033; the European H2020 IPERION HS Project (Integrated Platform for the European Research Infrastructure ON Heritage Science (GA 871034, WP5)); TOP Heritage-CM (S2018/NMT-4372) project from the Community of Madrid and with the support of Plataforma Temática Interdisciplinar of CSIC “Patrimonio Abierto: Investigación y Sociedad” (PTI-PAIS).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for the paper “Oujja, M., Palomar, T., Martínez-Weinbaum, M., Martínez-Ramírez S., Castillejo, M. 2021. Characterization of medieval-like glass alteration layers by laser spectroscopy and nonlinear optical microscopy. Eur. Phys. J. Plus 136, 859"

  • Oujja, Mohamed
  • Palomar Sanz, Teresa
  • Martínez-Weinbaum, Marina
  • Maestro-Guijarro, Laura
  • Martínez-Ramírez, S.
  • Castillejo, Marta
The study was undertaken in six medieval-like model glass samples UG (unaltered glass), MAK, MAR, MTA, MTB and MTN subjected to various environmental and atmospheric conditions in order to generate alteration layers of different characteristics. A potash-lime silicate glass, with composition similar to that of medieval glasses, was melted at 1400 °C during two hours, poured in a brass mould of rectangular cross section and annealed at 650 °C. The resulting glass ingot was cut in slices of around 10×10×2 mm3 and then polished using emery paper and an aqueous suspension of cerium oxide to obtain optical quality surfaces. Alteration of the glass slices was conducted by exposure to five different laboratory corrosion tests: SO2 corrosion for MAK sample, synthetic river water degradation for MAR, and degradation due to acid, basic and neutral medium for MTA, MTB and MTN, respectively. This dataset consists of images of the samples; Laser-induced Breakdown Spectrocopy (LIBS) spectra; Laser-induced Fluorescence (LIF) spectra; Optical Microscopy (OM); FT-Raman spectroscopy and Multi-Photon Excitation Fluorescence (MPEF) signals obtained with a Nonlinear optical microscopy (NLOM). This information allows characterizing the composition of both body glass and determining the thickness of the degradation layer. Images are presented in JPG. All spectra are presented in cvs format, in a single page. Descriptions of the samples and the experimental conditions in which the spectra were taken and the name of the column values are included at the top of each page. For LIBS, 1 file per sample of elemental composition of the medieval-like glass are included. Each file is composed of 2 columns (wavelength and intensity). For LIF, 1 file per sample of the analysis of fluorescent species of each medieval-like glass are included. Each file is composed of 2 columns (wavelength and intensity). For NLOM, 2 files per sample. In the first one: “MPEF Safe limits”, each file is composed for 10 columns: 2 are for depth (µm) and 8 are for MPEF signal divided in two groups relating to the the power in the sample surface. In the second group of files: “MPEF profiles”, each file is composed for 4 columns: 1 is for depth (µm), 1 is the normalized MPEF intensity, 1 is the Lorentzian fit of depth (µm) and the last one Lorentzian fit. (The thicknesses of the degradation layers of the medieval-like glasses is calculated by the FWHM values of the fits after refractive index corrections). For FT-Raman, 1 file per sample of the analysis of the structure of the medieval-like glass through their vibrational modes is included. Each file is composed of 2 columns (Raman shift and intensity in arbitrary units). This dataset is subject to a Creative Commons Attribution 4.0 International (CC BY 4.0) License., This is the experimental dataset used in the paper Eur. Phys. Plus, 136:859 (2021) (http://hdl.handle.net/10261/248668). Historical glass-based objects undergo, since the time of their manufacture, different degradation phenomena that are related to their composition and to the environment to which they were exposed. Three-dimensional (3D) structural and chemical characterization of the degradation layers is important to select the most adequate conservation strategies for glass objects. Optical microscopy (OM) is the most frequently used non-destructive method to examine the surface of historical glasses; however, the 3D structural assessment of alteration layers requires applying the destructive modality of this technique to conduct a cross-sectional study. In this work, a different approach for structural and compositional characterization of alteration layers on model medieval-like glasses is presented, based on the combination of the laser spectroscopies of laser-induced breakdown spectroscopy (LIBS), laser-induced fluorescence (LIF) and FT-Raman, and the emerging, cutting edge technique of nonlinear optical microscopy (NLOM) in the modality of multiphoton excitation fluorescence (MPEF). The results obtained through this multi-analytical photonic approach were compared with those retrieved by examination of the surface and cross sections of the samples by OM and scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM–EDS). While the combination of LIBS, LIF and FT-Raman served to assess the composition of the various alteration layers, the use of MPEF microscopy allowed the non-destructive determination of the thicknesses of these layers, showing for both thickness and composition a good agreement with the OM and SEM–EDS results. Thus, the proposed approach, which avoids sample preparation, illustrates the capability of non-destructive, or micro-destructive in the case of LIBS, laser spectroscopies and microscopies for the in situ study of glass objects of historic or/and artistic value, This research has been funded by the Spanish State Research Agency (AEI) through projects PID2019-104124RB-I00/AEI/1013039/501100011033, the CSIC General Foundation (ComFuturo Programme), by project TOP Heritage-CM (S2018/NMT-4372) from Community of Madrid, by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). Support by CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI-PAIS) is acknowledged. M.O. thanks CSIC for a contract. The authors also thank M.A. Villegas and M. García Heras (Institute of History, CSIC) for fruitful discussions on historical glasses., There are 4 files which correspond to each technic employed for the analysis of the six different samples. The file title “LIBS” contains: LIBS_UG; LIBS_MAK; LIBS_MAR; LIBS_MTA; LIBS_MTB; LIBS_MTN. The file for “LIF” contains: LIF_UG; LIF_MAK; LIF_MAR; LIF_MTA; LIF_MTB; LIF_MTN. The file for “FT-RAMAN” contains: FT-RAMAN_UG; FT-RAMAN_MAK; FT-RAMAN_MAR; FT-RAMAN_MTA; FT-RAMAN_MTB; FT-RAMAN_MTN. For the “MPEF” there are two files inside. One title “MPEF safe limits” which contains the documents: MPEF_MAK_SL; MPEF_MAR_SL; MPEF_MTA_SL; MPEF_MTB_SL; MPEF_MTN_SL. And the other called “MPEF profiles” which contains: MPEF_MAK_PROFILE; MPEF_MAR_PROFILE; MPEF _MTA_PROFILE; MPEF _MTB_PROFILE; MPEF _MTN_PROFILE., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Flash presentation: "Síntesis de ligantes con nanopartículas de Ag modificados por ablación láser para la obtención de sensores SERS"

  • Maestro-Guijarro, Laura
  • Martínez-Ramírez, S.
  • Oujja, Mohamed
  • Carmona-Quiroga, Paula
  • Castillejo, Marta
El curso se celebrará del 5 al 8 de julio de 2021 en el Palacio de Reuniones y Congresos de la Fundación Santa María de Albarracía, en Albarracín (Teruel). El curso está coordinado por Andrés Seral Ascaso y Scott Mitchell, del Instituto de Nanociencia y Materiales de Aragón, INMA (CSIC-UNIZAR). .- https://cursosextraordinarios.unizar.es/curso/2021/nuevas-perspectivas-en-la-aplicacion-de-nanomateriales-en-conservacion-y-restauracion-de, El uso del hormigón y los morteros de cemento está muy presente en el patrimonio cultural, encontrándose incluso algunas de estas construcciones declaradas como Patrimonio de la Humanidad por la UNESCO. Por ello es de vital importancia ser conocedores de la composición de este material para su correcta conservación presente y futura. Para modificar las propiedades reológicas y químicas del cemento se añaden aditivos en el agua de amasado en concentraciones menores al 5% lo que dificulta su detección con técnicas analíticas tradicionales, siendo necesario recurrir a otro tipo de técnicas de alta sensibilidad. La espectroscopía Raman por intensificación de superficies (SERS, Surface-enhanced Raman spectroscopy) permite la amplificación de las señales Raman por interacción de la radiación laser con nanopartículas metálicas, de manera que se pueden detectar moléculas en muy bajas concentraciones. Este trabajo pretende desarrollar un nuevo tipo de ligante compatible con materiales del Patrimonio para identificar la posible presencia de aditivos mediante la incorporación de nanopartículas metálicas (Ag). La investigación se basa en el empleo de técnicas espectroscópicas (UV-Vis, micro-Raman, Resonancia Magnética Nuclear) para la caracterización y validación de un ligante (con contenido en plata) como sensor SERS tras la síntesis inicial y tras su modificación estructural por irradiación con láser Nd:YAG de nanosegundos a 532 y 355 nm, y láser de Ti:Zafiro de femtosegundos a 400 nm. Así mismo, se explorarán nuevas vías para la obtención de sensores SERS basados en sustratos de ligante con contenido en Ag nanoestructurados/modificados por ablación láser., Esta investigación ha sido financiada por la Agencia Estatal de Investigaciones (AEI) a través del proyecto PID2019-104124RB-I00 / AEI /10.13039/501100011033, por el proyecto TOP Heritage-CM (S2018 / NMT-4372) de la Comunidad de Madrid y por el proyecto europeo H2020 IPERION HS (Plataforma Integrada para la Infraestructura Europea de Investigación en Ciencias del Patrimonio, GA 871034). Se agradece el apoyo de la Plataforma Interdisciplinar del CSIC ¿Patrimonio Abierto: Investigación y Sociedad¿ (PTI-PAIS).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of smooth amorphous thin films of silicon carbide with controlled properties through pulsed laser deposition

  • Oujja, Mohamed
  • Tabakkouht, K.
  • Sanz, Mikel
  • Rebollar, Esther
  • Sánchez-Arenillas, M.
  • Marco, J.F.
  • Castillejo, Marta
  • de Nalda, R.
10 pags., 5 figs., 1 tab., Thin films of silicon carbide (SiC) on Si (100) and SrTiO (100) substrates have been grown by nanosecond pulsed laser deposition (PLD) with a Q-switched Nd:YAG laser operating at the wavelengths of 1064, 532 and 266 nm. The deposits obtained consisted of smooth and uniform layers of amorphous SiC, free of holes and cracks, with thicknesses in the range of 30–100 nm and average roughness substantially lower than 1 nm. The role of laser wavelength and of substrate temperature (300 K vs. 1025 K) on morphology, crystallinity and composition of the deposits was assessed. The films were analyzed by X-ray diffraction, micro-Raman spectroscopy and X-ray photoelectron spectroscopy. In addition, optical emission spectroscopy was employed to evaluate the characteristics of the ablation plasma and its correlation with the film growth., This research was supported by the Spanish State Research Agency (AEI) and European Regional Development (FEDER) through Projects PID2019-106125GB-I00/AEI/0.13039/501100011033 and PID2019-104124RB-I00/AEI/0.13039/501100011033. Thanks are given to the Soft and Polymeric Matter group (IEM-CSIC) for the use of AFM. We are grateful to M. Furió from MNCN-CSIC and P. Gonzalez from ICTP-CSIC for Raman and X-ray difraction technical assistance, respectively. Funding Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectroscopic and Microscopic Characterization of Flashed Glasses from Stained Glass Windows

  • Palomar Sanz, Teresa
  • Martínez-Weinbaum, Marina
  • Aparicio, Mario
  • Maestro-Guijarro, Laura
  • Castillejo, Marta
  • Oujja, Mohamed
18 pags., 6 figs., 3 tabs. -- This article belongs to the Special Issue Interdisciplinary Researches for Cultural Heritage Conservation, Flashed glasses are composed of a base glass and a thin colored layer and have been used since medieval times in stained glass windows. Their study can be challenging because of their complex composition and multilayer structure. In the present work, a set of optical and spectroscopic techniques have been used for the characterization of a representative set of flashed glasses commonly used in the manufacture of stained glass windows. The structural and chemical composition of the pieces were investigated by optical microscopy, field emission scanning electron mi-croscopy‐energy dispersive X‐ray spectrometry (FESEM‐EDS), UV‐Vis‐IR spectroscopy, laser‐in-duced breakdown spectroscopy (LIBS), and laser‐induced fluorescence (LIF). Optical microscopy and FESEM‐EDS allowed the determination of the thicknesses of the colored layers, while LIBS, EDS, UV‐Vis‐IR, and LIF spectroscopies served for elemental, molecular, and chromophores characterization of the base glasses and colored layers. Results obtained using the micro‐invasive LIBS technique were compared with those retrieved by the cross‐sectional technique FESEM‐EDS, which requires sample taking, and showed significant consistency and agreement. In addition, LIBS results revealed the presence of additional elements in the composition of flashed glasses that could not be detected by FESEM‐EDS. The combination of UV‐Vis‐IR and LIF results allowed precise chemical identification of chromophores responsible for the flashed glass coloration., This research has been funded by the Spanish State Research Agency (AEI) through project PID2019-104124RB-I00/AEI/10.13039/501100011033, the Fundación General CSIC (ComFuturo Programme), by project TOP Heritage-CM (S2018/NMT-4372) from Community of Madrid, and by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for the paper "Palomar, T.; Martínez-Weinbaum, Marina; Aparicio, Mario; Maestro-Guijarro, Laura; Castillejo, Marta; Oujja, M. 2022. Spectroscopic and Microscopic Characterization of Flashed Glasses from Stained Glass Windows. Appl. Sci. 12(11): 5760"

  • Palomar Sanz, Teresa
  • Martínez-Weinbaum, Marina
  • Aparicio, Mario
  • Maestro-Guijarro, Laura
  • Castillejo, Marta
  • Oujja, Mohamed
The study was undertaken in eleven flashed glass samples, provided by LambertsGlas® consisting of a colorless base glass covered by layers of different colors and thicknesses. This dataset consists of images of the samples; Laser-induced Breakdown Spectrocopy (LIBS) spectra; Laser-induced Fluorescence (LIF) spectra; Optical Microscopy (OM) images; UV-Vis-IR spectra and Field Emission Scanning Electron Microscopy (FESEM) images and the assingment of the Energy-dispersive X-ray (EDS) analysis. This information allows characterizing the composition of both sides of the glasses and determining the chemilcal identification of chromophores responsible for the flashed glass coloration. Images are presented in JPG. All spectra are presented in cvs format, in a single page. Descriptions of the samples and the experimental conditions in which the spectra were taken and the name of the column values are included at the top of each page. For LIBS, 1 file per sample of elemental composition of the flashed glasses are included. Each file is composed of 2 columns (wavelength and intensity). For LIF, 1 file per sample of the analysis of fluorescent species of each flashed glass are included. Each file is composed of 2 columns (wavelength and intensity). For UV-Vis-IR spectroscopy, 1 file per sample of glass chromophores, just for the colored side. Each file is composed of 2 columns (wavelength and intensity). For FESEM-EDS, 2 files per sample. In the first one: "PHOTOS", 1 cross section image per sample is included. In the second group of files: "EDS", 1 file per sample of the assignment of the main elements. Each file is composed of 3 columns (the main elements, the results of the glass base and the colored layer in weight percentage, respectively). -- This dataset is subject to a Creative Commons Attribution 4.0 International (CC BY 4.0) License., This is the experimental dataset used in the paper Appl. Sci., 12(11), 5760 (2022) (https://www.mdpi.com/2076-3417/12/11/5760). Flashed glasses are composed of a base glass and a thin colored layer and have been used since medieval times in stained glass windows. Their study can be challenging because of their complex composition and multilayer structure. In the present work, a set of optical and spectroscopic techniques have been used for the characterization of a representative set of flashed glasses commonly used in the manufacture of stained glass windows. The structural and chemical composition of the pieces were investigated by optical microscopy, field emission scanning electron microscopy-energy dispersive X-ray spectrometry (FESEM-EDS), UV-Vis-IR spectroscopy, laser-induced breakdown spectroscopy (LIBS), and laser-induced fluorescence (LIF). Optical microscopy and FESEM-EDS allowed the determination of the thicknesses of the colored layers, while LIBS, EDS, UV-Vis-IR, and LIF spectroscopies served for elemental, molecular, and chromophores characterization of the base glasses and colored layers. Results obtained using the micro-invasive LIBS technique were compared with those retrieved by the cross-sectional technique FESEM-EDS, which requires sample taking, and showed significant consistency and agreement. In addition, LIBS results revealed the presence of additional elements in the composition of flashed glasses that could not be detected by FESEM-EDS. The combination of UV-Vis-IR and LIF results allowed precise chemical identification of chromophores responsible for the flashed glass coloration., This research has been funded by the Spanish State Research Agency (AEI) through project PID2019-104124RB-I00/AEI/10.13039/501100011033, the Fundación General CSIC (ComFuturo Programme), by project TOP Heritage-CM (S2018/NMT-4372) from Community of Madrid, and by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034)., There are 5 files which correspond to each technic employed for the analysis of the eleven different samples. The file title "PHOTOS" contains: Fig. 1_Flashedglasses_Photo; Fig. 2_OM_Photo. The file title “LIBS” contains: LIBS_Black-Baseglass; LIBS_Black-Coloredlayer; LIBS_Blue1-Baseglass; LIBS_Blue1-Coloredlayer; LIBS_Blue2-Baseglass; LIBS_Blue2-Coloredlayer; LIBS_Blue3-Baseglass; LIBS_Blue3-Coloredlayer; LIBS_Brown1-Baseglass; LIBS_Brown1-Coloredlayer; LIBS_Brown2-Baseglass; LIBS_Brown2-Coloredlayer; LIBS_Green1-Baseglass; LIBS_Green1-Coloredlayer; LIBS_Green2-Baseglass; LIBS_Green2-Coloredlayer; LIBS_Green3-Baseglass; LIBS_Green3-Coloredlayer; LIBS_Pink1-Baseglass; LIBS_Pink1-Coloredlayer; LIBS_Pink2-Baseglass; LIBS_Pink2-Coloredlayer. The file for “LIF” contains: LIF_Black-Baseglass; LIF_Black-Coloredlayer; LIF_Blue1-Baseglass; LIF_Blue1-Coloredlayer; LIF_Blue2-Baseglass; LIF_Blue2-Coloredlayer; LIF_Blue3-Baseglass; LIF_Blue3-Coloredlayer; LIF_Brown1-Baseglass; LIF_Brown1-Coloredlayer; LIF_Brown2-Baseglass; LIF_Brown2-Coloredlayer; LIF_Green1-Baseglass; LIF_Green1-Coloredlayer; LIF_Green2-Baseglass; LIF_Green2-Coloredlayer; LIF_Green3-Baseglass; LIF_Green3-Coloredlayer; LIF_Pink1-Baseglass; LIF_Pink1-Coloredlayer; LIF_Pink2-Baseglass; LIF_Pink2-Coloredlayer. For the “FESEM-EDS” there are two files inside. One title "EDS" which contains the documents: EDS_Black; EDS_Blue1; EDS_Blue2; EDS_Blue3; EDS_Brown1; EDS_Brown2; EDS_Brown2; EDS_Green1; EDS_Green2; EDS_Green3; EDS_Pink1; EDS_Pink2. And the other called "PHOTOS" which contains: FESEM_Black; FESEM_Blue1; FESEM_Blue2; FESEM_Blue3; FESEM_Brown1; FESEM_Brown2; FESEM_Green1; FESEM_Green2; FESEM_Green3; FESEM_Pink1; FESEM_Pink2., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Development of new SERS sensors based on the laser irradiation of the major hydration product of Portland Cement

  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Martínez-Ramírez, S.
  • Sánchez-Cortés, Santiago
  • Castillejo, Marta
  • Oujja, Mohamed
13th International Conference on Lasers in the Conservation of Artworks, Florence ­ September 12­-16, 2022, Portland cement concrete is considered, since being adopted by modern architecture in the twentieth century, a `noble¿ material, the latest to join the list of built heritage materials. For correct conservation of cement concrete, including the selection of compatible protective treatments, the determination of constitutents that can influence, cause or be the result of deterioration phenomena is of fundamental importance. However, components found in low concentrations, such as organic aditives, are difficult to detect with the most common concrete research­ and industry­driven analysis. In heritage science, surface­ enhanced Raman spectroscopy(SERS) has become a very useful molecular identification technique for the detection of organic molecules at very low concentrations provided by the physical effect known as surface plasmon localization. This effect occurs when the molecule is in close contact with metallic nanostructures upon resonant laser irradiation. In this work, the first approach for the development of a new "in situ" SERS sensor for Portland cement concrete is presented using a simplified system based on the main product of the hydration of Portland cement, a calcium silicate hydrate (C­S­H). Thereby, C­S­H with and without Ag were synthesized and irradiated by nanosecond ultraviolet and visible laser pulses for the detection of a model organic molecule, rhodamine B in low concentration (10­-6 M), a traditional analyte in SERS studies. The results of SERS analysis showed a high amplification of the rhodamine Raman signal in substrates irradiated by laser., The financial support of this work has been provided by the SCOCHLAS project (Study and Conservation of Cultural Heritage with Lasers, PID2019­104124RB­100) and the H2020 project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). The professional support provided by the CSIC 'Open Heritage: Research and Society (PTI­PAIS)' Interdisciplinary Thematic Platform is also gratefully acknowledged
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

In-­Depth structural and compositional assessments of aged terpenoid varnish layers

  • Martínez-Weinbaum, Marina
  • Martínez-Weinbaum, Marina
  • Carmona-Quiroga, Paula
  • Siano, S.
  • Castillejo, Marta
  • Ciofini, D.
  • Oujja, Mohamed
13th International Conference on Lasers in the Conservation of Artworks, Florence ­ September 12­-16, 2022, This research has been funded by the Spanish State Research Agency (AEI) through project PID2019­104124RB­I00/AEI/ 1013039/501100011033, by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). Support by CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI­PAIS) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

LIBS vs XRF application on underwater heritage: the case study of the silver coins of the frigate “Nuestra Señora de las Mercedes"

  • Donate-Carretero, I.
  • Oujja, Mohamed
  • Martínez-Weinbaum, Marina
  • Díaz, S.
  • García, E.
  • Bueso, M.
  • Castillejo, Marta
  • Martín Muñoz, Margarita
13th International Conference on Lasers in the Conservation of Artworks, Florence ­ September 12­-16, 2022, This research has been funded by the Spanish State Research Agency (AEI) through project PID2019­104124RB­I00/AEI/ 1013039/501100011033, by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). Support by CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI­PAIS) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Spectroanalytical evaluation of the potential selectivity of laser treatment of oil paintings at 213, 266, and 2940 nm

  • Ciofini, D.
  • Martínez-Weinbaum, Marina
  • Castillejo, Marta
  • Oujja, Mohamed
  • Chillé, C.
  • Siano, S.
  • Osticioli, I.
13th International Conference on Lasers in the Conservation of Artworks, Florence ­ September 12­-16, 2022, The financial support of this work has been provided by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034), by the project CNR4C­PLAS@rt” co­financed by the Tuscany Region and El.En. S.p.A., and by the Spanish State Research Agency (AEI) through project PID2019­104124RB­I00/AEI/ 1013039/501100011033. Support from CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI­PAIS) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

In-depth structural and compositional assessments of aged terpenoid varnish layers

  • Martínez-Weinbaum, Marina
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Siano, S.
  • Castillejo, Marta
  • Ciofini, D.
  • Oujja, Mohamed
XIII LACONA “Lasers in the Conservation of Artworks", Florence, on September 12-16, 2022 . -- http://www.lacona13.eu/#, Varnishes are employed in painted artworks for protection from atmospheric pollution and oxidation and for improving the aesthetic appearance of paintings by providing an even and brilliant surface finish. Varnishes undergo complex and differentiated structural and chemical changes over time depending on their composition and conservation conditions. The present work investigates the degradation due to aging of the outermost layers of varnishes as a function of depth by using nonlinear optical microscopy (NLOM) [1] in the modality of multiphoton excitation fluorescence (MPEF). This totally noninvasive technique has been employed for the determination, with a high axial and lateral resolution, of the affected regions of pictorial varnish layers resulting from various types of degradation [2,3]. In this work, terpenoid varnishes such as dammar, mastic, shellac and sandarac, subjected to various types and degrees of aging, natural, artificial and a combination of the two, were tested. A homemade nonlinear optical microscope, based on a tightly focused pulsed femtosecond laser emitting at 800 nm, was used for the investigation. Singlephoton laserinduced fluorescence (LIF) measurements served to determine the degree of surface aging and the optimum NLOM-MPEF operating conditions and helped to interpret the results obtained applying the latter [4]. These results signpost the correlations of the nature of the varnish layer, the initial thickness and the type and extent of aging with the indepth degradation gradients determined by NLOM-MPEF. ACKNOWLEDGMENTS This research has been funded by the Spanish State Research Agency (AEI) through project PID2019104124RBI00/ AEI/ 1013039/501100011033, by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). Support by CSIC Interdisciplinary Platform ¿Open Heritage: Research and Society¿ (PTIPAIS) is acknowledged. REFERENCES [1] A. Dal Fovo, M. Castillejo, R. Fontana, Nonlinear optical microscopy for artworks physics, La Rivista del Nuovo Cimento 44 (2021) 453498. [2] G. Filippidis, M. Mari, L. Kelegkouri, A. Philippidis, A. Selimis, K. Melessanaki, M. Sygletou, C. Fotakis, Microsc. Microanal. 21 (2015) 510517. [3] M. Oujja, S. Psilodimitrakopoulos, E. Carrasco, M. Sanz, A. Philippidis, A. Selimis, P. Pouli, G. Filippidis, M. Castillejo, Phys. Chem. Chem. Phys. 19 (2017) 2283622843. [4] D. Ciofini, M. Oujja, M. V. Cañamares, S. Siano, M. Castillejo, Microchem. J., 141 (2018) 1224., This research has been funded by the Spanish State Research Agency (AEI) through project PID2019­104124RB­I00/AEI/ 1013039/501100011033, by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). Support by CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI­PAIS) is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

LIBS vs XRF application on underwater heritage: the case study of the silver coins of the frigate "Nuestra Señora de las Mercedes"

  • Donate-Carretero, I.
  • Oujja, Mohamed
  • Martínez-Weinbaum, Marina
  • Díaz, S.
  • García, E.
  • Bueso, M.
  • Castillejo, Marta
  • Martín Muñoz, Margarita
XIII LACONA “Lasers in the Conservation of Artworks", Florence, on September 12-16, 2022 . -- http://www.lacona13.eu/#, Underwater cultural heritage entails complex conservation problems. Particularly, metallic artefacts under aerobic marine conditions suffer from severe corrosion that produces thick patinas, in addition to the deposition of concretions of the seabed. The nature of these degradation layers depends on several factors: the original composition of the metallic alloys, along with the minor elements and traces, the metallurgical processes for obtaining metals and manufacturing and the environmental conditions on the seabed [1]. As a consequence, the conservation and study of these metal objects are challenging. This work presents a comparative investigation using two noninvasive elemental analytical techniques, laserinduced breakdown spectroscopy (LIBS) [2] and Xray fluorescence (XRF) [3], for chemical characterization of underwater corroded metals. In this case study, the considered pieces were selected from the treasure of the Spanish frigate ¿Nuestra Señora de las Mercedes¿, a ship loaded with funds and products from the Viceroyalty of Peru and sank by the British Army in 1804 off the coast of Algarve in Portugal. In 2007 the treasure was plundered by the commercial company Odyssey Marine Exploration, but after a legal battle in a US court it was recovered by the Spanish State [4]. The pieces are six coins (¿reales de a ocho¿) made of 925 sterling silver, belonging to two different SpanishAmerican mints, Potosí and Lima, and produced between the years 1797 and 1804. LIBS analyses were carried out in air under nanosecond laser excitation at 266 nm and XRF studies were performed in the same areas explored by LIBS, using an Xray tube with rhodium anode and peak voltage of 50 kV. The comparison of the obtained results indicates that, while XRF is effective in characterizing the main corrosion products of the surface of the coins, such as silver chloride and bromide, copper chlorides and carbonates, LIBS analysis allows to identify the original composition of the metallic core, including minor elements as Ni, Hg and Co, regardless of the patina components. Therefore, the complementarity of both techniques is demonstrated: XRF helps to answer inquiries associated to the conservation and restoration of the metallic pieces and LIBS can solve questions about their core composition and metallurgical techniques., This research has been funded by the Spanish State Research Agency (AEI) through project PID2019­104124RB­I00/AEI/ 1013039/501100011033, by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). Support by CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI­PAIS) is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparison of the Use of Traditional Solvents and Nanosecond 213 nm Nd:YAG Laser in Thinning Naturally Aged Varnish on a Contemporary Oil Easel Painting

  • Martínez-Weinbaum, Marina
  • Lozano-Carbó, Miriam
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Oujja, Mohamed
  • Castillejo, Marta
11 pags., 7 figs., 2 tabs. -- This article belongs to the Special Issue Cleaning Strategies for Cultural Heritage, The removal of aged varnish on artistic paintings is a delicate intervention and the use of UV laser for this purpose is of special relevance. In particular, the use of nanosecond-pulsed lasers operating at 213 nm has been noted to produce good results in mock-up samples, but it has not been tested in real artworks. In this paper, we report on the application of this procedure for the first time on a contemporary oil easel painting with naturally aged varnish. The obtained results were compared with those achieved using traditional solvents, specifically a mixture of ligroin:acetone. Additionally, hot water was used to remove surface dirt. The performance of the different cleaning procedures was assessed with a range of techniques, including low-power microscopy, UV lamp illumination, laser-induced fluorescence (LIF), and laser-induced breakdown spectroscopy (LIBS). Of the tested treatments, the best performance is obtained by nanosecond laser irradiation at 213 nm using an adequate laser fluence (typically 0.14 J/cm2) that allows controlled and efficient removal of the outermost aged varnish layer without affecting the underlying non-aged varnish and paint layers., This research was funded by the Spanish State Research Agency (AEI) through the project SCOCHLAS (Study and Conservation of Cultural Heritage with Lasers, PID2019-104124RB-I00/AEI/1013039/501100011033), by the Community of Madrid through the project Top Heritage-CM (Tecnologías en Ciencias del Patrimonio, S2018/NMT_4372), and by the H2020 project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). L. Maestro-Guijarro’s participation was financed by a Youth Guarantee contract (CAM20_IQFR_AI_06) from the Community of Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset for the paper “Martínez-Weinbaum, M.; Lozano-Carbó, M.; Maestro-Guijarro, L.; Carmona-Quiroga, P.M.; Oujja, M.; Castillejo, M., Comparison of the Use of Traditional Solvents and Nanosecond 213 nm Nd:YAG Laser in Thinning Naturally Aged Varnish on a Contemporary Oil Easel Painting. Heritage. 2023, 6(2), 957-967.”

  • Martínez-Weinbaum, Marina
  • Lozano-Carbó, Miriam
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Oujja, Mohamed
  • Castillejo, Marta
The study was undertaken in a contemporary oil easel painting which was temporarily loaned from the Restoration-Conservation Laboratory of the Faculty of Fine Arts of the University of Barcelona. Different varnish removal procedures were assessed over this painting, and, in order to analyse and compare the efficiency of the methods, several non-invasive and invasive techniques were applied. This dataset consists of images of the artwork (general and detail) and the results of the different cleaning procedures; the varnish removal test conditions performed; Laser-induced Breakdown Spectroscopy (LIBS) spectra; Laser-induced Fluorescence (LIF) spectra; and Fourier-transform infrared spectroscopy (FTIR Spectroscopy). This information allows for assessing the results achieved with each cleaning methodology. Images are presented in JPG format. All spectra are presented in CSV format, on a single page. Descriptions of the selected areas and the experimental conditions in which the spectra were taken and the name of the column values are included at the top of each page. To illustrate the artwork, we took one image of the painting considered in the study (Fig. 1) and a general image under UV light of the picture (Fig. 2). Additionally, we can see the outcomes of varnish removal in the detail photos digital microscopy images (Fig. 3), and in detail UV light photograph of one of the cleaned areas (Fig. 4). For kinetic LIBS, 1 file per each uncleaned and cleaned by different methods area is included. Each file is composed of 41 columns, the first one (x) for wavelength and, the other 40 (y) for intensity. For LIF, 1 file per sample of the analysis of the fluorescence of each un/cleaned area. Each file is composed of 2 columns (wavelength and intensity). For FTIR, 1 file for the characterisation of the varnish, which is composed of 2 columns, the first one indicates the wavenumber (x), and the second one the transmittance (y)., [EN] The removal of aged varnish on artistic paintings is a delicate intervention and the use of UV laser for this purpose is of special relevance. In particular, the use of nanosecond-pulsed lasers operating at 213 nm has been noted to produce good results in mock-up samples, but it has not been tested in real artworks. In this paper, we report on the application of this procedure for the first time on a contemporary oil easel painting with naturally aged varnish. The obtained results were compared with those achieved using traditional solvents, specifically a mixture of ligroin:acetone. Additionally, hot water was used to remove surface dirt. The performance of the different cleaning procedures was assessed with a range of techniques, including low-power microscopy, UV lamp illumination, laser-induced fluorescence (LIF), and laser-induced breakdown spectroscopy (LIBS). Of the tested treatments, the best performance is obtained by nanosecond laser irradiation at 213 nm using an adequate laser fluence (typically 0.14 J/cm2) that allows controlled and efficient removal of the outermost aged varnish layer without affecting the underlying non-aged varnish and paint layers., This research was funded by the Spanish State Research Agency (AEI) through the project SCOCHLAS (Study and Conservation of Cultural Heritage with Lasers, PID2019-04124RBI00/AEI/1013039/501100011033), by the Community of Madrid through the project Top Heritage- CM (Tecnologías en Ciencias del Patrimonio, S2018/NMT_4372), and by the H2020 project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). L. Maestro-Guijarro’s participation was financed by a Youth Guarantee contract (CAM20_IQFR_AI_06) from the Community of Madrid., There are 4 folders that correspond to each technic employed for the analysis of the cleaning procedures, and 1 for the cleaning conditions description. The folder titled "PHOTOS" contains: Fig. 1 Image of the picture. Selected cleaned areas; Fig. 2 UV light image of the artwork; Fig. 3 Digital microscopy of area 6 (before and after cleaning); Fig. 4 Fluorescence under UV lamp before and after cleaning. The folder titled “LIBS” contains: LIBS_withoutcleaning; LIBS_deionizedwater; LIBS_solventmixture; LIBS_213nm,0.10 Jcm2; LIBS_213nm,0.14 Jcm2. The folder for “LIF” contains: LIF_withoutcleaning; LIF_deionizedwater; LIF_solventmixture; LIF_213nm,0.10 Jcm2; LIF_213nm,0.14 Jcm2. The folder “FTIR” contains: FTIR_varnish. The folder "Cleaning conditions description" contains the file "Cleaning treatments"., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser-based techniques for the non-invasive characterisation of grisaille paints on stained-glass windows

  • Machado, Carla
  • Oujja, Mohamed
  • Cerqueira Alves, Luis
  • Martínez-Weinbaum, Marina
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Castillejo, Marta
  • Vilarigues, Márcia
  • Palomar Sanz, Teresa
Grisaille was the first paint applied on stained-glass panels, used in Europe since the twelfth century. Historical written sources described the use of iron and copper together with a high lead-silica base glass in the grisailles production. This project aims to study the evolution of the grisaille paint composition throughout time and the changes in the raw materials used in their production using non-destructive and non-invasive techniques. To achieve this objective, 23 grisaille samples dated from the 13th to the twentieth centuries from nine different countries (Portugal, Poland, United Kingdom, Sweden, Norway, Belgium, Low Countries, Germany, and France) were studied by means of micro particle-induced X-ray emission (μ-PIXE), micro energy dispersive X-ray fluorescence (μ-EDXRF), laser-induced breakdown spectroscopy (LIBS), laser-induced fluorescence (LIF), non-linear optical microscopy (NLOM) in the modality of multiphoton excitation fluorescence (MPEF) and optical microscopy (OM). The results showed that it was possible to identify compositional differences and patterns throughout the samples when compared with literature results. The preference for using copper in central and south-central European countries and the addition of new compounds (CoO, Cr2O3, MnO) as colouring agents since the nineteenth century was verified. The LIBS analyses allow the identification of boron on two samples, confirming the change of base glass components since the seventeenth century. The NLOM-MPEF showed the capability of this technique to measure the grisaille paint layers’ thickness. This non-invasive multi-analytical and complementary approach proves itself efficient in identifying changes in the grisaille’s composition throughout time, which can be interpreted as changes in the raw materials and manufacture used in the production of these paint materials., This research has been funded by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034), by the Spanish State Research Agency (AEI) through project PID2019-104124RB-I00/AEI/, by the Fundação de Ciência e Tecnologia de Portugal (project ref. UIDB/EAT/00729/2020, UIDP/00729/2020, LA/P/0008/2020, UIDB/ 04349/2020 and PTDC/ART-PER/1702/2021, researcher grant CEECIND/02249/2021 and doctoral grant ref. PD/BD/136673/2018) and by project TOP Heritage-CM (S2018/NMT-4372) from Community of Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reflectance Spectroscopy as a Novel Tool for Thickness Measurements of Paint Layers

  • Dal Fovo, A.
  • Martínez-Weinbaum, Marina
  • Oujja, Mohamed
  • Castillejo, Marta
  • Fontana, Raffaella
A major challenge in heritage science is the non-invasive cross-sectional analysis of paintings. When low-energy probes are used, the presence of opaque media can significantly hinder the penetration of incident radiation, as well as the collection of the backscattered signal. Currently, no technique is capable of uniquely and noninvasively measuring the micrometric thickness of heterogeneous materials, such as pictorial layers, for any painting material. The aim of this work was to explore the possibility of extracting stratigraphic information from reflectance spectra obtained by diffuse reflectance spectroscopy (DRS). We tested the proposed approach on single layers of ten pure acrylic paints. The chemical composition of each paint was first characterised by micro-Raman and laser-induced breakdown spectroscopies. The spectral behaviour was analysed by both Fibre Optics Reflectance Spectroscopy (FORS) and Vis-NIR multispectral reflectance imaging. We showed that there is a clear correlation between the spectral response of acrylic paint layers and their micrometric thickness, which was previously measured by Optical Coherence Tomography (OCT). Based on significant spectral features, exponential functions of reflectance vs. thickness were obtained for each paint, which can be used as calibration curves for thickness measurements. To the best of our knowledge, similar approaches for cross-sectional measurements of paint layers have never been tested., This research was funded by the Spanish State Research Agency (AEI) through project PID2019-104124RB-I00/AEI/10.13039/501100011033, by project TOP Heritage-CM (S2018/NMT-4372) from Community of Madrid, and by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In-depth structural and compositional assessment of aged terpenoid varnish layers by nonlinear optical microscopy

  • Martínez-Weinbaum, Marina
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Siano, S.
  • Ciofini, D.
  • Castillejo, Marta
  • Oujja, Mohamed
11 pags., 6 figs., 3 tabs., Varnishes are employed in painted artworks for protection from atmospheric pollution and oxidation and for improving the esthetic appearance by providing an even and brilliant surface finish. Also, in some cases, colored varnishes are applied intentionally to modify the chromatic appearance of paintings. Varnishes undergo complex and differentiated structural and chemical changes over time depending on their composition and conservation conditions. The present work investigates the extent of degradation of the outermost layers of varnish coatings due to aging as a function of depth by using nonlinear optical microscopy (NLOM) in the modality of multiphoton excitation fluorescence (MPEF). This non-invasive technique has been employed for the determination of the thickness, with a microscopic axial and lateral resolution, of the affected regions of pictorial terpenoid varnish layers, such as dammar, mastic, shellac and sandarac, subjected to various types and degrees of aging, artificial, natural and a combination of both. A homemade nonlinear optical microscope, based on a tightly focused pulsed femtosecond laser emitting at 800 nm, was used for the investigation. Single-photon laser-induced fluorescence (LIF) measurements served to determine the degree of surface aging and the optimum NLOM-MPEF operating conditions and helped to interpret the results obtained by applying the latter. These results signpost the correlations between the extent of degradation, non-invasively determined by NLOM-MPEF, the type and length of aging, the nature of the varnish and the initial thickness of the varnish layer., This research has been funded by the Spanish State Research Agency (AEI) through project PID2019-104124RB-I00/AEI/1013039/501100011033, by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034), and by the Community of Madrid project Top Heritage-CM (Tecnologías en Ciencias del Patrimonio, S2018/NMT_4372). Support by CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI-PAIS) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

LIBS vs XRF on underwater heritage: The silver coins of "Nuestra Señora de las Mercedes"

  • Donate-Carretero, I.
  • Díaz, S.
  • García, E.
  • Bueso, M.
  • Martín Muñoz, Margarita
  • Oujja, Mohamed
  • Martínez-Weinbaum, Marina
  • Castillejo, Marta
11 pags., 5 figs., 1 tab., This work presents a comparative investigation using two non-invasive elemental analytical techniques, X-ray fluorescence (XRF) and laser-induced breakdown spectroscopy (LIBS), for the chemical characterization of a real case study of underwater-corroded metals: the silver coins of the Spanish frigate “Nuestra Señora de las Mercedes”. A ship loaded with funds and products from the Viceroyalty of Peru, well known to had been sunk by the British Army in 1804 off the coast of Algarve and plundered more than two hundred years later by the commercial company Odyssey Marine Exploration. The combination of both techniques allows overcoming the complexity of the thick patinas covering the coins, compound by corrosion products and the deposits from the seabed. While XRF helps to answer inquiries associated with the conservation and restoration of the metallic pieces, LIBS can solve questions about their core composition and metallurgical techniques employed for their production., This research has been funded by the Spanish State Research Agency (AEI) through project PID2019-104124RB-I00/AEI/1013039/501100011033, by the H2020 European project IPER-ION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). Professional support of the CSIC Interdisciplinary Thematic Platform (PTI) Open Heritage: Research and Society (PTI-PAIS) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Estudio de conjuntos numismáticos mediante espectroscopia de plasma inducido por láser y fluorescencia de rayos X, Study of numismatic sets by Laser Induced Breakdown Spectroscopy and X-ray Fluorescence

  • Donate Carretero, I.
  • Oujja, Mohamed
  • Martínez-Weinbaum, Marina
  • Díaz-Martínez, Soledad
  • García-Alonso, Emma
  • Bueso Manzanas, Miriam
  • Castillejo, Marta
  • Martín-Gil, María
17 pags., 8 figs., 2 tabs., Esta investigación ha sido financiada por la Agencia Estatal de Investigación (AEI) a través del proyecto PID2019-104124RB-I00/AEI/1013039/501100011033, del proyecto europeo H2020 IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034) y del proyecto de la Comunidad de Madrid TOP Heritage-CM (Tecnologías en Ciencias del Patrimonio, S2018/NMT_4372). Se agradece el apoyo de la Plataforma Interdisciplinar del CSIC «Patrimonio Abierto: Investigación y Sociedad» (PTI-PAIS)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessment of silver-based calcium silicate hydrate as a novel SERS sensor

  • Maestro-Guijarro, Laura
  • Martínez-Ramírez, S.
  • Sánchez-Cortés, Santiago
  • Marco, J.F.
  • de la Figuera, Juan
  • Castillejo, Marta
  • Oujja, Mohamed
  • Carmona-Quiroga, Paula
8 pags., 10 figs., 2 tabs., This study aims at synthesizing a novel Surface-Enhanced Raman Spectroscopy (SERS) sensor based on a nanostructured substrate, calcium silicate hydrate (C-S-H), the main hydration product of Portland cement. The procedure involves first the incorporation of silver within the nanostructure of the gel (C-S-Ag-H) and second the modification of the surface of pellets of the newly synthesized material by laser irradiation at 532 nm or 355 nm. The assessment of the SERS activity revealed no amplification of the organic molecule rhodamine B (RdB) signal, used as a probe, on the C-S-Ag-H before laser irradiation. However, after laser irradiation, the SERS effect was comparable to that of reference colloidal Ag nanoparticles (NPs). This SERS response is attributed to an increase in the concentration of metallic silver on the surface of the C-S-Ag-H pellets upon laser irradiation and material ablation as revealed by X-ray Photoelectron Spectroscopy (XPS). Further enhancement of the SERS signals was induced by depositing colloidal Ag NPs on the irradiated pellets, giving rise to interparticle hot spots where the electromagnetic field is further intensified., This research has been funded by MCIN/AEI/10.13039/501100011033 through projects PID2022-137017OB-I00, PID2020-113900RB-I00 and PID2019-104124RB-I00 and by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). Support by CSIC Platform “Open Heritage: Research and Society” (PTI-PAIS) is acknowledged. L. Maestro-Guijarro’s participation was financed by a Youth Guarantee contract (CAM20_IQFR_AI_06) from the Community of Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantitative spectroscopic characterization of laser-induced effects on oil paint films using 213, 266, or 2940 nm

  • Ciofini, D.
  • Martínez-Weinbaum, Marina
  • Castillejo, Marta
  • Oujja, Mohamed
  • Chillé, C.
  • Siano, S.
  • Osticioli, I.
11 pags., 6 figs., 3 tabs., Removal of aged varnish layers from easel paintings is a challenging task requiring methodologies capable of preventing any alteration of the underlying painted surface. Laser-ablation approaches using the fourth and fifth harmonics of a Q-Switched Nd:YAG (266 and 213 nm, 15 ns) and Free-Running Er:YAG laser (2940 nm, 160 µs pulses) can allow for very thin removal rates but their discrimination of the underlying paint film and self-termination potential are very limited. Thus, there is a need to develop suitable analytical methods for promptly identifying the possible occurrence of any undesired effect on the paint layer beneath the varnish, which is intentionally or unintentionally irradiated during the laser thinning treatment. Such side effects depend on the irradiation parameters and the specific material features of the pictorial film. Linseed oil paint models were prepared using lead white, vermilion, chrome yellow, ultramarine, Prussian blue and zinc white. Two distinct pigment volume concentrations (PVC) were used to investigate the dependence of the laser-induced alterations on oil binder volume ratio: low PVC (gloss paint) and high PVC (matte paint). After determining threshold exposure limits for each laser wavelength, laser-induced effects slightly above the threshold fluence were qualitatively and quantitatively assessed using FTIR and µ-Raman spectroscopies. Results showed that IR-reflectance bands of glossy and matte films exhibited appreciable shifts and distortion upon laser irradiation while reductions of the signal-to-background ratio were observed in µRaman spectra. The developed method, based on the processing of a number of spectral acquisitions, enabled for the first time the quantitative assessment and comparison of the corresponding undesired laser-induced effects in the outermost painted layer., The financial support of this work has been provided by the H2020 project IPERION HS (GA 871034), by CNR through the Short-Term Mobility Program (STM 2021), by the project CNR4CPLAS@rt” co-financed by the Tuscany Region and El.En. S.p.A., and by the Spanish State Research Agency (AEI) through projects PID2019-104124RB-I00/AEI/1013039/501100011033 and PID2022- 137017OB-I00/AEI/1013039/501100011033. Support from CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI-PAIS) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Microscopía y espectroscopía láser para análisis no invasivo de barnices terpenoides envejecidos

  • Martínez-Weinbaum, Marina
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Siano, Salvatore
  • Castillejo, Marta
  • Ciofini, Daniele
  • Oujja, Mohamed
Jornadas JIP, 2 y 3 de marzo de 2023, Museo Arqueológico Nacional, Madrid .-- https://jornadasjip.com/index.php/jip-2023/, Esta investigación ha sido financiada por la Agencia Estatal de Investigación (AEI) a través del proyecto PID2019-104124RB-I00/AEI/1013039/501100011033 y por el proyecto europeo H2020 IPERION HS (Integrated Platform for the European Research Infrastructure on Heritage Science, GA 871034). Se agradece el apoyo de la Plataforma Temática Interdisciplinar del CSIC “Patrimonio Abierto: Investigación y Sociedad” (PTI-PAIS)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Validación de eliminación mediante láser de barniz envejecido sobre pintura de caballete: un caso práctico

  • Martínez-Weinbaum, Marina
  • Lozano, Míriam
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Castillejo, Marta
  • Oujja, Mohamed
Jornadas JIP, 2 y 3 de marzo de 2023, Museo Arqueológico Nacional, Madrid .-- https://jornadasjip.com/index.php/jip-2023/, Esta investigación ha sido financiada por los proyectos: SCOCHLAS (Study and Conservation of Cultural Heritage with Lasers, PID2019-104124RB-I00/AEI /10.13039/501100011033), TOP Heritage-CM (TecnologÌas en Ciencias del Patrimonio, S2018/NMT_4372) y el proyecto europeo H2020 IPERION HS (Plataforma Integrada para la Infraestructura Europea de Investigación en Ciencias del Patrimonio, GA 871034). Se agradece adem·s el apoyo profesional de la Plataforma Interdisciplinar del CSIC “Patrimonio Abierto: Investigación y Sociedad” (PTI-PAIS). L. Maestro- Guijarro expresa su agradecimiento por la concesión del contrato de Garantía Juvenil (CAM20_IQFR_AI_06) de la Comunidad de Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

SERS activity of silver-based calcium silicate hydrate upon laser irradiation

  • Maestro-Guijarro, Laura
  • Martínez-Ramírez, S.
  • Sánchez-Cortés, Santiago
  • Marco, J.F.
  • de la Figuera, Juan
  • Castillejo, Marta
  • Oujja, Mohamed
  • Carmona-Quiroga, Paula
C-S-H and C-S-Ag-H gel solutions were analysed by UV/Vis/NIR spectroscopy with a Shimadzu 3600 UV/Vis/NIR spectrometer equipped with 2H and Wlamps, a photomultiplier (UV/Vis), and a InGaAs and a PbS (NIR) detectors. The baseline reference sample was prepared with 1000 µL of MilliQ water. The samples were diluted 1:19 (50 μL of gel solution to 950 μL of of MilliQ water) and the measurements were recorded in the range of 190–850 nm, with slow scan speed. The sampling interval and the slit width were 0.5 nm and 1 nm, respectively. For the 29Si NMR analysis of dried C-S-H and C-S-Ag-H, a Bruker AV-400 (9.4 T and νR of 4 kHz) (Bruker, Germany) NMR spectrometer was used in the following conditions: pulse width of 7 μs and relaxation delay of 60 s with typically 3000 scans. The 29Si chemical shifts were determined relative to tetramethylsilane. The spectra were treated for band deconvolution into Gaussian peaks and fitted using Origin 2022 software. The micro-Raman spectra were carried out on pressed pellets of the samples with a Raman microscope Renishaw RM1000 (Renishaw, Wotton-under-Endge, UK) equipped with a Leica microscope and an electrically refrigerated CCD camera. Laser excitation line was provided by a He:Ne (633 nm wavelength, 25 mW output power with approximately 2 mW at the sample). The spectra were obtained using a 50× magnification objective, a spectral resolution of 4 cm−1, a 10 s exposure time, 5 accumulations, and 2mW laser power per spectra in the range of 2000–100 cm−1 in order to increase signal/noise ratio. The frequencies were calibrated with silicon at 520 cm−1. X-ray photoelectron (XP) and SERS spectra were taken on pressed C-S-Ag-H pellets before and after irradiation at 355 nm, and 532 nm (and of the reference C-S-H pellet). For the former technique, the analysis was performed under a base pressure lower than 7.5 · 10−9 Torr using a PHOIBOS-150 (Specs) electron analyzer, Mg Kα radiation and a constant pass energy of 100 eV and 20 eV for the wide and narrow scans, respectively. The pellets were fixed to the sample holder using double-sided conductive carbon tape to ensure a good conductivity and the X-ray gun was used at 100 W power in order to avoid any possible sample degradation induced by the X-ray irradiation. The binding energy scale was referenced to the main C 1s signal of the adventitious carbon contamination layer which was set at 284.8 eV. All the spectra were fitted using pseudo-Voigt lines (30 % Gaussian/70 % Lorentzian) and a Shirley-type background. For the SERS analysis, the same experimental conditions were used as for obtaining the Raman spectra using Rhodamine B as a probe molecule (an aliquot of 2 µl of a 5 × 10−6 M aqueous solution was dropped on the irradiated and on the non-irradiated silver-containing pellets). Additionally, different reference RhB spectra were acquired on hydroxylamine-reduced silver nanoparticles (NPs), 2 µl dropped on top of both C-S-H and C-S-Ag-H pellets for the comparison of the SERS activities. More details about samples preparation and irradiation conditions are available in Materials folder., Data life: 2024- (unlimited validity), This is the experimental dataset used in the paper Applied Surface Science, 662: 160107 (2024) (https://doi.org/10.1016/j.apsusc.2024.160107) in which a novel Surface-Enhanced Raman Spectroscopy (SERS) sensor based on a nanostructured substrate, calcium silicate hydrate (C-S-H), the main hydration product of Portland cement, was synthetized. The procedure involves first the incorporation of silver within the nanostructure of the gel (C-S-Ag-H) and second the modification of the surface of pellets of the newly synthesized material by laser irradiation at 532 nm or 355 nm. This data set includes the results of the effect of silver on the gel structure via visible UV spectroscopy, micro-Raman and 29Si Magic Angle Spinning Nuclear Magnetic Resonance (MAS NMR). It also includes the characterization analyses of the C-S-Ag-H pellets by X-ray Photoelectron Spectroscopy (XPS) to determine the silver oxidation state and the assessment of their SERS activity before and after laser irradiation using for the latter Rhodamine B (RhB) as a probe., We acknowledge financial support from the Spanish State Research Agency (AEI) through projects PID2019-104124RB-I00/AEI/10.13039/501100011033; PID2020-113900RB-I00/AEI/10.13039/ 501100011033; and PID2022-137017OB-I00/AEI/10.13039/501100011033; from European Union’s Horizon 2020 through IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034) project; and from the Community of Madrid through Maestro-Guijarro’s Youth Guarantee contract (CAM20_IQFR_AI_06)., Materials folder: “Sample_synthesis”; “Laser_irradiation_conditions” NMR folder: "NMR_readme"; "NMR_C-S-H"; "NMR_C-S-Ag-H" Raman folder: “Raman_readme"; "Raman_C-S-H"; "Raman_C-S-Ag-H"; "Raman_C-S-H_RhB"; "Raman_C-S-Ag-H_RhB" SERS folder: "SERS_readme"; "SERS_RhB_C-S-Ag-H_355"; "SERS_RhB_C-S-Ag-H_355_NPs"; "SERS_RhB_C-S-Ag-H_532"; "SERS_RhB_C-S-Ag-H_532_NPs"; "SERS_RhB_C-S-Ag-H_NPs"; "SERS_RhB_C-S-H_NPs" XPS folder: "XPS_readme"; "XPS_AgAuger_C-S-Ag-H_532"; "XPS_AgAuger_C-S-Ag-H_355"; "XPS_Ag3d_C-S-Ag-H_532"; "XPS_Ag3d_C-S-Ag-H_355"; "XPS_Ag3d_C-S-Ag-H"; "XPS_Ag3d_C-S-H"; "XPS_Ca2p_C-S-Ag-H_532"; "XPS_C1s_C-S-Ag-H_532"; "XPS_wide_C-S-Ag-H_532"; "XPS_wide_C-S-Ag-H_355"; "XPS_wide_C-S-Ag-H"; "XPS_wide_C-S-H" UV-Vis folder: "UV-VIS_readme"; "UV-VIS_C-S-H"; "UV-VIS_C-S-Ag-H", Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Laboratory Instrumentation

  • Melo, María J.
  • Ghirardello, Marta
  • Candeo, Alessia
  • Comelli, Daniela
  • Manzoni, Cristian
  • Thoury, Mathieu
  • Réfrégiers, Matthieu
  • Oujja, Mohamed
  • Sanz, Mikel
  • Dal Fovo, Alice
  • Fontana, Raffaella
  • Zhou, Yue
  • Kastenholz, Heidi
  • Warren, Warren S.
  • Castillejo, Marta
  • Fischer, Martin C.
36 pages, 6 figures, 1 table, Research funded by Spanish State Research Agency, project PID2019-104124RB-I00/AEI/10.13039/501100011033, program TOP HeritageCM(S2018/NMT-4372), H2020 EU project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034) and supported by CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI-PAIS). We are grateful to collaboration with G. Filippidis (IESL-FORTH, Greece)., Peer reviewed