Pasar al contenido principal

LASERES PARA LA CONSERVACION DEL PATRIMONIO

PID2022-137017OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 20
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessment of silver-based calcium silicate hydrate as a novel SERS sensor

  • Maestro-Guijarro, Laura
  • Martínez-Ramírez, S.
  • Sánchez-Cortés, Santiago
  • Marco, J.F.
  • de la Figuera, Juan
  • Castillejo, Marta
  • Oujja, Mohamed
  • Carmona-Quiroga, Paula
8 pags., 10 figs., 2 tabs., This study aims at synthesizing a novel Surface-Enhanced Raman Spectroscopy (SERS) sensor based on a nanostructured substrate, calcium silicate hydrate (C-S-H), the main hydration product of Portland cement. The procedure involves first the incorporation of silver within the nanostructure of the gel (C-S-Ag-H) and second the modification of the surface of pellets of the newly synthesized material by laser irradiation at 532 nm or 355 nm. The assessment of the SERS activity revealed no amplification of the organic molecule rhodamine B (RdB) signal, used as a probe, on the C-S-Ag-H before laser irradiation. However, after laser irradiation, the SERS effect was comparable to that of reference colloidal Ag nanoparticles (NPs). This SERS response is attributed to an increase in the concentration of metallic silver on the surface of the C-S-Ag-H pellets upon laser irradiation and material ablation as revealed by X-ray Photoelectron Spectroscopy (XPS). Further enhancement of the SERS signals was induced by depositing colloidal Ag NPs on the irradiated pellets, giving rise to interparticle hot spots where the electromagnetic field is further intensified., This research has been funded by MCIN/AEI/10.13039/501100011033 through projects PID2022-137017OB-I00, PID2020-113900RB-I00 and PID2019-104124RB-I00 and by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). Support by CSIC Platform “Open Heritage: Research and Society” (PTI-PAIS) is acknowledged. L. Maestro-Guijarro’s participation was financed by a Youth Guarantee contract (CAM20_IQFR_AI_06) from the Community of Madrid., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-invasive stratigraphic analyzes of gelatine-based modern painting materials with linear and nonlinear optical methods

  • Quintero Balbas, Diego
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Oujja, Mohamed
  • Castillejo, Marta
  • Bettini, Francesca
  • Porcinai, Simone
  • Striova, Jana
13 pags., 7 figs., 3 tabs. -- Focus Issue on Photonics for Cultural Heritage: Technological Advances and Methodological Improvements, Stratigraphic analyzes of polychrome surfaces, such as paintings, often need samples to offer consistent results regarding the sequence and composition of the layers. Non-invasive methodologies based on linear and nonlinear optical techniques limit material removal from the objects. Recently, optical coherence tomography (OCT) has become the preferred choice of heritage scientists because it is a safe and fast alternative for studying transparent or semi-transparent layers. Yet, nonlinear optical microscopy (NLOM)) technique in its modality of multiphoton excitation fluorescence (MPEF) has emerged as a promising tool for the same purpose. Here, we explored linear (OCT and confocal Raman microspectroscopy (CRM)) and nonlinear (NLOM-MPEF) optical methods’ capability to investigate gelatine-based layers in mock-up samples and a painting dated 1939 by an artist from the Surrealistic entourage. The optical behavior of mock-up samples that imitate the painting stratigraphy and of six painting fragments detached from the support was also investigated with fiber optics reflectance spectroscopy and laser induced fluorescence (LIF). Thickness values from the mock-ups obtained with OCT, CRM, and MPEF have provided evidence of the complementarity, from a millimetric to a micrometric scale, and the limitations (e.g. strong fluorescence emission in CRM) of the methods. Moreover, the presence of gelatine was ascertained by LIF spectroscopy applied to the painting fragments and NLOM-MPEF confirmed its suitability as a non-invasive technique for investigating gelatine-based stratigraphic systems., Financial support by the Access to Research Infrastructures activity in the Horizon 2020 Programme of the EU (IPERION HS Grant Agreement n.871034) is gratefully acknowledged. This research has been funded by the Diagnostica Non invaSiva e conservazione di daghErrotipi e altri materiali fotografici (DIAGNOSE) project co-funded by Tuscany Region, POR FSC 2014–2020-Axis Employment GiovaniS`ı (Grant No. CUP B53D21008070008), Museo Galileo, El.En. group, and the National Institute of Optics from the National Council of Research (CNR-INO), in collaboration with the Opificio delle Pietre Dure (OPD). Funding from the Spanish State Research Agency (AEI) through project PID2022-137017OB-I00/AEI/1013039/ 501100011033 and support from CSIC Platform ‘Open Heritage: Research and Society’ (PTI-PAIS) are also acknowledged. The authors are grateful to the Peggy Guggenheim Collection from Venice for the access to the painting fragments analysed in this work. The authors also thank Dr Carlo Galliano Lalli, for the cross-section sample available in the OPD archive. D.Q.B. is supported by Next Generation EU—Humanities and Heritage Italian Open Science Cloud (H2IOSC) project (CUP B63C22000730005)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

SERS activity of silver-based calcium silicate hydrate upon laser irradiation

  • Maestro-Guijarro, Laura
  • Martínez-Ramírez, S.
  • Sánchez-Cortés, Santiago
  • Marco, J.F.
  • de la Figuera, Juan
  • Castillejo, Marta
  • Oujja, Mohamed
  • Carmona-Quiroga, Paula
C-S-H and C-S-Ag-H gel solutions were analysed by UV/Vis/NIR spectroscopy with a Shimadzu 3600 UV/Vis/NIR spectrometer equipped with 2H and Wlamps, a photomultiplier (UV/Vis), and a InGaAs and a PbS (NIR) detectors. The baseline reference sample was prepared with 1000 µL of MilliQ water. The samples were diluted 1:19 (50 μL of gel solution to 950 μL of of MilliQ water) and the measurements were recorded in the range of 190–850 nm, with slow scan speed. The sampling interval and the slit width were 0.5 nm and 1 nm, respectively. For the 29Si NMR analysis of dried C-S-H and C-S-Ag-H, a Bruker AV-400 (9.4 T and νR of 4 kHz) (Bruker, Germany) NMR spectrometer was used in the following conditions: pulse width of 7 μs and relaxation delay of 60 s with typically 3000 scans. The 29Si chemical shifts were determined relative to tetramethylsilane. The spectra were treated for band deconvolution into Gaussian peaks and fitted using Origin 2022 software. The micro-Raman spectra were carried out on pressed pellets of the samples with a Raman microscope Renishaw RM1000 (Renishaw, Wotton-under-Endge, UK) equipped with a Leica microscope and an electrically refrigerated CCD camera. Laser excitation line was provided by a He:Ne (633 nm wavelength, 25 mW output power with approximately 2 mW at the sample). The spectra were obtained using a 50× magnification objective, a spectral resolution of 4 cm−1, a 10 s exposure time, 5 accumulations, and 2mW laser power per spectra in the range of 2000–100 cm−1 in order to increase signal/noise ratio. The frequencies were calibrated with silicon at 520 cm−1. X-ray photoelectron (XP) and SERS spectra were taken on pressed C-S-Ag-H pellets before and after irradiation at 355 nm, and 532 nm (and of the reference C-S-H pellet). For the former technique, the analysis was performed under a base pressure lower than 7.5 · 10−9 Torr using a PHOIBOS-150 (Specs) electron analyzer, Mg Kα radiation and a constant pass energy of 100 eV and 20 eV for the wide and narrow scans, respectively. The pellets were fixed to the sample holder using double-sided conductive carbon tape to ensure a good conductivity and the X-ray gun was used at 100 W power in order to avoid any possible sample degradation induced by the X-ray irradiation. The binding energy scale was referenced to the main C 1s signal of the adventitious carbon contamination layer which was set at 284.8 eV. All the spectra were fitted using pseudo-Voigt lines (30 % Gaussian/70 % Lorentzian) and a Shirley-type background. For the SERS analysis, the same experimental conditions were used as for obtaining the Raman spectra using Rhodamine B as a probe molecule (an aliquot of 2 µl of a 5 × 10−6 M aqueous solution was dropped on the irradiated and on the non-irradiated silver-containing pellets). Additionally, different reference RhB spectra were acquired on hydroxylamine-reduced silver nanoparticles (NPs), 2 µl dropped on top of both C-S-H and C-S-Ag-H pellets for the comparison of the SERS activities. More details about samples preparation and irradiation conditions are available in Materials folder., Data life: 2024- (unlimited validity), This is the experimental dataset used in the paper Applied Surface Science, 662: 160107 (2024) (https://doi.org/10.1016/j.apsusc.2024.160107) in which a novel Surface-Enhanced Raman Spectroscopy (SERS) sensor based on a nanostructured substrate, calcium silicate hydrate (C-S-H), the main hydration product of Portland cement, was synthetized. The procedure involves first the incorporation of silver within the nanostructure of the gel (C-S-Ag-H) and second the modification of the surface of pellets of the newly synthesized material by laser irradiation at 532 nm or 355 nm. This data set includes the results of the effect of silver on the gel structure via visible UV spectroscopy, micro-Raman and 29Si Magic Angle Spinning Nuclear Magnetic Resonance (MAS NMR). It also includes the characterization analyses of the C-S-Ag-H pellets by X-ray Photoelectron Spectroscopy (XPS) to determine the silver oxidation state and the assessment of their SERS activity before and after laser irradiation using for the latter Rhodamine B (RhB) as a probe., We acknowledge financial support from the Spanish State Research Agency (AEI) through projects PID2019-104124RB-I00/AEI/10.13039/501100011033; PID2020-113900RB-I00/AEI/10.13039/ 501100011033; and PID2022-137017OB-I00/AEI/10.13039/501100011033; from European Union’s Horizon 2020 through IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034) project; and from the Community of Madrid through Maestro-Guijarro’s Youth Guarantee contract (CAM20_IQFR_AI_06)., Materials folder: “Sample_synthesis”; “Laser_irradiation_conditions” NMR folder: "NMR_readme"; "NMR_C-S-H"; "NMR_C-S-Ag-H" Raman folder: “Raman_readme"; "Raman_C-S-H"; "Raman_C-S-Ag-H"; "Raman_C-S-H_RhB"; "Raman_C-S-Ag-H_RhB" SERS folder: "SERS_readme"; "SERS_RhB_C-S-Ag-H_355"; "SERS_RhB_C-S-Ag-H_355_NPs"; "SERS_RhB_C-S-Ag-H_532"; "SERS_RhB_C-S-Ag-H_532_NPs"; "SERS_RhB_C-S-Ag-H_NPs"; "SERS_RhB_C-S-H_NPs" XPS folder: "XPS_readme"; "XPS_AgAuger_C-S-Ag-H_532"; "XPS_AgAuger_C-S-Ag-H_355"; "XPS_Ag3d_C-S-Ag-H_532"; "XPS_Ag3d_C-S-Ag-H_355"; "XPS_Ag3d_C-S-Ag-H"; "XPS_Ag3d_C-S-H"; "XPS_Ca2p_C-S-Ag-H_532"; "XPS_C1s_C-S-Ag-H_532"; "XPS_wide_C-S-Ag-H_532"; "XPS_wide_C-S-Ag-H_355"; "XPS_wide_C-S-Ag-H"; "XPS_wide_C-S-H" UV-Vis folder: "UV-VIS_readme"; "UV-VIS_C-S-H"; "UV-VIS_C-S-Ag-H", Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Authentication of glass beads from Cultural Heritage: An interdisciplinary and multi-analytical approach

  • Maestro-Guijarro, Laura
  • Pinilla, Alejandro
  • Carmona-Quiroga, Paula
  • Agua Martínez, Fernando
  • Castillejo, Marta
  • García Heras, Manuel
  • Oujja, Mohamed
  • Villegas Broncano, María Ángeles
17 pages, 11 figures, 10 tables, Analysis of glass-based artworks is important for authentication purposes. In recent years, there have been rapid advancements and improvements in the characterization of glass objects using different analytical approaches. The present study presents an interdisciplinary and multi-analytical authentication approach that provides useful tools and markers to unmask possible imitations, counterfeiting, and forgeries in Cultural Heritage glass beads by comparing the composition of historical and modern glass beads. The approach includes the use of binocular magnifying glass, X-ray Fluorescence (XRF), Field Emission Scanning Electron Microscopy-Energy Dispersive X-ray Spectroscopy (FESEM-EDS), UV-Vis spectrophotometry, X-ray diffraction (XRD) and Laser Induced Breakdown Spectroscopy (LIBS) techniques. Resulting data indicate that antimony, when detected, is only present in historical beads, while boron, zinc, and/or molybdenum are only detected as possible components in modern beads. As marker chromophores for historical beads, lead antimoniate or iron are responsible for yellow, copper for red, and iron and/or copper for green colors. Modern beads coloration was attributed to the presence of cadmium sulfoselenide microparticles for yellow to red colors and chromium for green colors. Opacity in historical beads was generated by dispersed tin oxide or calcium antimoniate microcrystals, while in modern beads the opacity is related to ZrO2 microcrystals and/or fluorine ions. In this study, LIBS has been validated and proven feasible for in situ exploring analytical parameters that can be useful for authentication purposes of historical glass objects, regardless of their size, provenance, and chronology., This research has been funded by MCIN/AEI/10.13039/ 501100011033/FEDER, UE through the project PID2022-137017OB- I00 and by the Regional Government of Madrid through the project TEC Heritage-CM (TEC-2024/TEC-39), and supported by the CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI- PAIS). The authors acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). A. Pinilla Gisbert acknowledges a PhD contract from the Regional Government of Madrid (PIPF- 2023/PH-HUM-29465). Glass beads from the oppidum of Ulaca (´ Avila, Spain) were unearthed through systematic archaeological excavations undertaken by Drs. J.R. ´ Alvarez-Sanchís and J. Rodríguez-Hernandez within the framework of the project URBADEN (PID2021-123721OB- I00) funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. The glass bead of Cubillejo de la Sierra (Guadalajara, Spain) comes from systematic excavations lead by Dr. M. Cerdeno and funded by the Guadalajara Provincial Council. Glass beads from the Ibo Island (Mozambique) have been possible within the framework of a research program developed by a Spanish archaeological team led by Dr. M. Ruiz- G´ alvez in cooperation with the Eduardo Mondlane University, which undertook systematic archaeological excavations from 2015 to 2017 funded by the Spanish Ministry of Economy, Industry and Competitiveness through the National Program for Fostering Excellence in Scientific and Technical Research (HAR2013-48495-C2-2-P), the International Archaeological Excavations scheme from the Spanish Cultural Heritage Institute (IPCE), and the Palarq Foundation. Mozambican Heritage authorities are gratefully acknowledged for giving permission to export the glass beads to Spain. The authors especially thank Drs. M. Ruiz-G´ alvez, J.R. ´ Alvarez-Sanchís and M. Cerdeno for providing them with the historical glass bead samples., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Determination of Boron Content in Surface Paintings From Historical Stained-Glass Windows

  • Maestro-Guijarro, Laura
  • Sedano, Mercedes
  • Schibille, Nadine
  • Pradell, Trinitat
  • Castillejo, Marta
  • Oujja, Mohamed
  • Palomar Sanz, Teresa
11 pages, 7 figures, 3 tables .-- This article also appears in: Society Volumes: Portugal Society Volumes: Spain The Chemical Arts: Chemistry for Characterization, Interpretation and Management of Cultural Heritage, Stained-glass windows are often painted with grisailles and enamels. These glassy materials have a low melting temperature and are fixed to the base glass by firing processes. Lead and/or boron are commonly added to the painting material to lower their melting temperature so that they can melt without deforming the glass support. In the present study, model glass samples (with well-known boron content), replica and historical materials were analysed for their composition using Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) and Laser Induced Breakdown Spectroscopy (LIBS). The imprint left on the analysed samples after laser irradiation was observed using optical profilometry. The feasibility of using LIBS in situ as a suitable quantitative analytical technique to detect the presence of boron in historical enamels even in very small quantities was assessed. Quantitative information on historical Spanish enamels and grisailles was obtained from calibration curves generated from the model glass samples with known boron content. The proposed procedure enables a satisfactory chemical quantitative study of historical glass materials in situ, regardless of their size, provenance, and chronology., This research has been funded by the Fundação de Ciência eTecnologia from Portugal (project ref. UIDB/EAT/00729/2020,UIDP/00729/2020, 2023.05135. RESTART, and researcher grant CEECIND/02249/2021), the Spanish State Research Agency (AEI) through the projects PID2022-137017OB-I00/AEI/1013039/501100011033 and PID2022-137783OB-I00, the Regional Government of Madrid through the project TEC Heritage-CM (TEC-2024/TEC-39), the Generalitat de Catalunya through the Consolidated Group 2021 SGR 00343, support from CSIC Platform’Open Heritage: Research and Society’ (PTI-PAIS) and the CSIC Open Access Publication Support Initiative through its Unit ofInformation Resources for Research (URICI) are acknowledged.Teresa Palomar thanks MICIU for Ramón y Cajal contract(RYC2023-045699-I), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Determination of Boron Content in Enamel and Grisaille Paintings from Stained-Glass Windows [Dataset]

  • Maestro-Guijarro, Laura
  • Sedano, Mercedes
  • Schibille, Nadine
  • Pradell, Trinitat
  • Castillejo, Marta
  • Oujja, Mohamed
  • Palomar Sanz, Teresa
All samples (reference glasses, replica enamels, and historical grisailles and enamels) were analyzed by LA-ICP-MS. These analyses were carried out at IRAMAT-CEB in Orléans (France). The analyses were done using a Resonetics M50E excimer laser (ArF, 193 nm) equipped with a S155 ablation cell and a Thermo Fisher Scientific ELEMENT XR mass spectrometer system. The ablations were typically carried out with a 5 mJ energy at 10 Hz pulse frequency in spot-mode and a beam diameter of 100 microns for the base glass. The enamels were typically analysed on the surface due to insufficient thickness with a beam diameter of 50 microns that was occasionally reduced down to 25 microns when saturation of the signal caused by high concentrations of transition metals occurred. A pre-ablation time of either 10 s or 20 s depending on the thickness of the sample was followed by 30 s signal acquisition, resulting in 10 mass scans. The ablated material is transported to the plasma torch by an argon/helium flow at an approximate rate of 1 L/ min for Ar and 0.65 L/min for He. The ion signals in counts-persecond are recorded for 58 isotopes (from Li to U). Standard Reference Material (NIST SRM610), as well as Corning glasses B, C, and D and APL1 (in-house standard glass), were used for external calibration, while 28Si was used as internal standard. Quantitative concentrations were calculated based on the procedures described by Gratuze, B., Blet-Lemarquand, M. & Barrandon, JN. J. Radioanal. Nucl. Chem. 247, 645–656 (2001). https://doi.org/10.1023/A:1010623703423. Precision and accuracy are reflected in the repeated measurements of reference glasses Corning A and NIST SRM612. LIBS analyses of all samples including reference glasses, replica enamels, and historical grisailles and enamels were carried out, at ambient atmospheric conditions, on the surface and in-depth (stratigraphic study) of the considered glass samples using laser excitation at 266 nm (4th harmonic of a Q-switched Nd: YAG laser (Lotis TII, LS-2147), 15 ns pulses, 1 Hz repetition rate). LIB spectra were recorded using a 0.2 m Czerny-Turner spectrograph (Andor, Shamrock Kymera-193i-A) equipped with a grating of 1800 grooves/mm (blazed at 265 nm) and coupled to a time-gated intensified charge-coupled device (ICCD) camera (Andor Technology, iStar CCD 334, 1024x1024 active pixels, 13 µm x 13 µm pixel). The ICCD detector is synchronized with the Q-Switch output electrical signal that triggers the laser pulse. The laser beam was directed to the surface of the samples by the use of mirrors at an incidence angle of 45°. Focusing with a 10 cm focal length lens allowed fluences in the range of 5–9 J/cm2 to be achieved. The shot-to-shot laser energy fluctuation was less than 10%. LIB spectra were recorded in the 240–600 nm wavelength range using a step and glow mode at intervals of 30 nm. For the stratigraphic analysis, the spectra were recorded by applying several laser pulses in the same area of the samples at 30 nm wavelength intervals centered at 285, 325, 360, 400 and 500 nm. The spectra were acquired at a 0.17 nm resolution with a gate delay and width of 200 nanoseconds and 3 microseconds, respectively. For higher wavelengths, a cut-off filter at 300 nm was placed in front of the entrance window of the spectrograph to reduce the scattered laser light and to avoid second-order diffractions. Each LIB spectrum resulted from a single signal acquisition as it provides good signal/noise ratios. An optical profilometer model Zeta-20 True color 3D from Zeta Instruments was used to perform the optical profiles on the pits produced by LIBS analyses in replica and historical samples. For profiling measurements, an x20 objective was used. The data were processed with Zeta View software during the acquisition and Gwyddion 2.67 software to select, and represent the final data., This is the experimental dataset used in the paper Chemistry-Methods, e202400057 (2025) (https://doi.org/10.1002/cmtd.202400057) in which quantitative information on historical Spanish enamels and grisailles was obtained from calibration curves generated from the model glass samples with known boron content. The procedure involves the compositional analyses of model glass samples (with well-known boron content), replica and historical materials using Laser Ablation Inductively Coupled Plasma Mass Spectrometry (LA-ICP-MS) and Laser Induced Breakdown Spectroscopy (LIBS). Two methods for calibration curves were established based on LIBS and LA-ICP-MS analyses. In the first, the ratio of the corresponding relative intensities of boron and silicon with lead determined by LIBS measurements was represented as a function of the boron content (in wt %) measured by LA-ICP-MS. On the other hand, in the second approach, the ratio of the relative intensities of boron and silicon with lead obtained by LIBS was represented as a function of the ratio between the amount of boron and silicon with lead obtained by LA-ICP-MS. This data set includes the compositional results provided by LIBS and LA-ICP-MS, the in-depth LIBS analyses useful for studying boron degradation profiling, and the calibration curves. It also includes the images and optical profiles of the imprint left on the analyzed samples after laser irradiation observed using optical profilometry., We acknowledge financial support from: Fundação de Ciência e Tecnologia from Portugal (project ref. UIDB/EAT/00729/2020, UIDP/00729/2020, 2023.05135.RESTART, and researcher grant CEECIND/02249/2021); the Spanish State Research Agency (AEI) through projects PID2022-137017OB-I00/AEI/1013039/501100011033 and PID2022-137783OB-I00; the Regional Government of Madrid through the project TEC Heritage-CM (TEC-2024/TEC-39); and the Generalitat de Catalunya through the Consolidated Group 2021 SGR 00343. Support from CSIC Platform' Open Heritage: Research and Society’ (PTI-PAIS) and the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI) are also acknowledged. T. Palomar thanks MICIU for Ramón y Cajal contract (RYC2023-045699-I)., Samples folder: “Sample_description”; “Reference_mock-up_samples_preparation”OM and Profilometry folder: "OM_and_profilometry_readme"; "BC3B-blue"; "BC3B-purple"; "E3-yellow"; "E131-blue”; “Profilometry_BC3B-blue"; "Profilometry_BC3B-purple"; "Profilometry_E3-yellow"; "Profilometry_E131-blue"LIBS folder: “LIBS_readme"; "LIBS_reference"; "LIBS_BC3B-purple_A"; "LIBS_BC3B-purple_B"; "LIBS_E107-purple_A"; "LIBS_E107-purple_B"; "LIBS_stratigraphic_E131-blue_A"; "LIBS_stratigraphic_E131-blue_C"; "LIBS_stratigraphic_EN1 C-yellow_B"; "LIBS_stratigraphic_EN1 C-yellow_D" LA-ICP-MS folder: "LA-ICP-MS_readme"; "LA-ICP-MS_Reference"; "LA-ICP-MS_Replica"; "LA-ICP-MS_Historical"Calibration curves folder: "Calibration_curves_readme"; "Calibration curves_First approach"; "Calibration curves_Second approach", Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights into the stratigraphy of gelatin-based emulsion in historical dry plate photographic negatives: A multi-analytical approach

  • Quintero Balbas, Diego
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Oujja, Mohamed
  • Castillejo, Marta
  • Cattaneo, Barbara
  • Bernardoni, Andrea
  • Santagostino Barbone, Alessandra
  • Cagnini, Andrea
  • Striova, Jana
This research investigates historical gelatin dry plate negatives’ chemical composition and stratigraphic structure through a comprehensive multi-analytical approach. Our methodology integrated optical and laser-based techniques, with microscopies, including Optical and Scanning Electron Microscopy – Backscattered Electrons (SEM-BSE) and Non-linear Optical Microscopy (NLOM) in its Multi-photon Excitation Fluorescence (MPEF) modality to analyze stratigraphy. MPEF enabled us to overcome the limitations associated with light absorption encountered in other optical techniques. Chemical analysis using Laser-Induced Breakdown Spectroscopy (LIBS), Scanning Electron Microscopy – Energy Dispersive X-ray Spectroscopy (SEM-EDS), and micro-Raman spectroscopy allowed for the classification of negative types based on specific compositional materials, such as synthetic dyes. Our findings contribute to the knowledge of dry plate negative composition and stratigraphy, the aspects that have seldom been investigated. The information retrieved is crucial for understanding the realization and degradation mechanisms of these valuable artifacts, often prone to delamination and flaking, and can inform conservators to better treat historical dry plate photographic negatives., This work was supported by EU Horizon 2020 (GA n.871034), Tuscany Region (Grant No. CUP B53D21008070008), Museo Galileo, El.En. group, and the National Institute of Optics from the National Council of Research (CNR-INO), European Union NextGenerationEU – National Recovery and Resilience Plan (NRRP) (Project code IR0000029-CUP-B63C22000730005), Spanish State Research Agency (PID2022-137017OB-I00/ AEI/1013039/ 501100011033), Regional Government of Madrid (TEC-2024/TEC-39)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Surface and In-Depth Physical and Structural Changes on Dammar and Acrylic Varnishes Upon Artificial Aging

  • Oujja, Mohamed
  • Maestro-Guijarro, Laura
  • Castillejo, Marta
  • Carmona-Quiroga, Paula
  • dal Fovo, Alice
  • Fontana, Raffaella
  • Rosi, Francesca
  • Cardinali, Martina Alunni
  • Romani, Aldo
  • Comez, Lucia
  • Riminesi, Cristiano
  • Iwanicka, Magdalena
  • Targowski, Piotr
  • Kowalska, Magdalena
  • Philippidis, Aggelos
  • Pouli, Paraskevi
Poster presented at the International Conference on Analytical Techniques for Heritage Studies and Conservation (TECHNART 2025), held in Perugia (Italy), May 6–9, 2025., Varnishes are used in painted artworks for protection from atmospheric pollution and oxidation and for improving the aesthetic appearance of paintings by providing an even and brilliant surface finish. Varnishes are sensitive to environmental conditions (light, temperature, humidity, etc.) and therefore are prone to physical and chemical modifications over time. Detailed studies have been undertaken to investigate the possible induced degradation effects and offer safe procedures to improve and complement painting conservation and restoration practices. In the present study, a multi-analytical approach has been tested to assess the surface and in-depth physical and chemical changes induced on dammar and acrylic varnishes upon artificial aging (photo and thermo-hygrometric aging). The adopted approach is based on the use of different photonic spectroscopies and microscopies such as Reflectance Imaging Spectroscopy (RIS) in the Visible, Optical Coherence Tomography (OCT), Laser Scanning micro-Profilometry, Non-linear Optical Microscopy in the modality of Multiphoton Excitation Fluorescence (NLOM-MPEF), Brillouin Spectroscopy (BLS), external Reflection FTIR Spectroscopy and Laser Induced Fluorescence (LIF). The obtained results signpost the correlations between the varnish nature, aging conditions, and the presence of the underlying painting material on the varnish degradation. While, as expected, dammar shows serious damage effects upon photo-aging, the acrylic varnish reveals better stability and resistance. Chemical/compositional variations due to light-ageing have been correlated with morphological, optical and visco-elastic changes. NLOM-MPEF has allowed in a non-invasive way the determination of in-depth photo-degradation gradients for dammar varnish. Finally, the proposed multi-analytical approach could be used as a non-invasive tool for monitoring the varnish conditions and its possible influence on the underlying paint., This work is partially funded by the IPERION HS project of the European Union's Horizon 2020 Research and Innovation Programme under Grant Agreement n. 871034. Funding from projects PID2022-137017OB-I00 (of MCIN/AEI/10.13039/501100011033/FEDER, UE) and TEC Heritage-CM (TEC-2024/TEC-39 of Regional Government of Madrid) and support from the CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI-PAIS) are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Multianalytical Approach for Laser Cleaning Assessment of Ancient Tapestries

  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Castillejo, Marta
  • Oujja, Mohamed
  • García, Verónica
  • López, Almudena
  • Siano, Salvatore
  • Agresti, Juri
  • Osticiolo, Iacopo
  • Ciofini, Daniele
Poster presented at the International Conference on Analytical Techniques for Heritage Studies and Conservation (TECHNART 2025), held in Perugia (Italy), May 6–9, 2025., In the field of Heritage Science, laser cleaning of textiles has been a challenging topic for years. As a promising cleaning method for different artwork materials, such as stone, metals or paintings, several studies have been carried out to test the adequacy of this method for textiles, as it is contactless and does not require humectants or water [1]. The present work concerns the laser cleaning of three historical tapestry pieces from the 16th – 18th centuries provided by the Royal Tapestry Factory, Madrid, Spain. The historical textile samples with colored threads were characterized before and after laser irradiation using a multianalytical approach to assess the suitability and feasibility of the laser cleaning method. The cleaning tests were performed with a Long-Q-Switched (LQS) Nd:YAG laser at its fundamental wavelength (1064 nm, 120 ns) with different laser fluences, from 0.1 to 1.8 J/cm2. The multianalytical study includes the techniques of Optical Microscopy (OM), Fourier-Transform Infrared Spectroscopy (FTIR), μ-Raman spectroscopy and Surface Enhance Raman Spectroscopy (SERS), Fibre Optics Reflectance Spectroscopy (FORS) and Colorimetry. FTIR was used to determine the nature of the warp and weft fibers [2]. Additionally, μ-Raman and SER spectroscopies served to identify the organic colorants used for dying the textile threads [3]. To select the best laser wavelength, FORS measurements were performed in every color tone of the pieces. These measurements helped us to decide on the use of 1064 nm for laser cleaning of the pieces. Finally, OM and Colorimetry were performed before and after laser irradiation in selected areas of the pieces to assess the dust removal and possible discoloration/damage of the fibers at used fluences. The present work has revealed that silk is the main manufacturing material and that the colorants used were, among others, indigo and alizarin. Regarding laser cleaning effects, the promising preliminary results indicate efficient removal of dust and the absence of color changes on the remaining textile., The present work has been supported by Spanish MCIN/AEI, project PID2022-137017OB-I00, Regional Government of Madrid, project TEC Heritage-CM (TEC-2024/TEC-39), and the Horizon Europe Project, iPhotoCult (Project number: 101132448). L. Maestro-Guijarro also thanks CSIC for iMOVE24103 support for an international stay in the LASBEC group (IFAC-CNR). Support by the CSIC Platform “Open Heritage: Research and Society” (PTI-PAIS) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

From Green to Brown: Characterization of the Fast Alteration of Modern Greenish Enamels in Glass Windows

  • Palomar, Teresa
  • Calatayud, David G.
  • Oujja, Mohamed
  • Maestro-Guijarro, Laura
  • Aparicio, Mario
  • Mosa, Jadra
  • Koppermann, Bettina
  • Seliger, Léonie
9 pages, 11 figures, 1 table, In 2009-2014, new glass panels were produced by the Stained-Glass Studio of Canterbury Cathedral (UK) and installed in St Peter's Church (Little Barrington, Burford), St Lawrence's Church (Mereworth, Kent), and Canterbury Cathedral. After a few years, some spots and stains have appeared on the greenish areas of the panels. The common factor is that the panels were produced using the same green enamel. The present work reports on the studies of the observed alterations in green enamels to propose possible degradation mechanisms. These studies are based on using different analytical techniques such as optical microscopy, scanning electron microscopy energy dispersive X-ray spectroscopy, inductively coupled plasma mass spectrometry, laser-induced breakdown spectroscopy, X-ray diffraction, µ-Raman spectroscopy, profilometry, X-ray photoelectron spectroscopy, and UV-vis spectroscopy. The characterization of the fragments from the original panels showed that a brown layer of dark lead compounds was formed on the green enamel. The alteration occurred in a 3-step alteration mechanism divided into Pb2+ lixiviation from the enamel, formation of hydrocerussite (2PbCO3·Pb(OH)2), and transformation into scrutinyite (α-PbO2) and plattnerite (β-PbO2)., This research has been funded by the Fundação para a Ciência eTecnologia from Portugal (project ref. UIDB/EAT/00729/2020,UIDP/00729/2020, and 2023.05135.RESTART), the Spanish StateResearch Agency (AEI) through project PID2022-137017OB-I00/AEI/1013039/501100011033, and the Regional Government of Madrid through the project TEC Heritage-CM (TEC-2024/TEC-39).Teresa Palomar thanks MICIU for the Ramón y Cajal contract (RYC2023-045699-I). Support from CSIC Platform “Open Heritage:Research and Society” (PTI-PAIS) and the CSIC Open AccessPublication Support Initiative through its Unit of InformationResources for Research (URICI) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Analysis of glass beads from Cultural Heritage for authentication purposes [Dataset]

  • Maestro-Guijarro, Laura
  • Pinilla Gisbert, Alejandro
  • Carmona-Quiroga, Paula
  • Agua Martínez, Fernando
  • Castillejo, Marta
  • García Heras, Manuel
  • Oujja, Mohamed
  • Villegas Broncano, María Ángeles
The considered glass beads were compositionally characterized using a multi-analytical approach. FESEM examinations were accomplished on polished surfaces and fractures, as well as on cross-sections inlayed into cold-setting epoxy resin and later mirror-polished using an aqueous suspension of cerium oxide. The FESEM employed was a Hitachi S-4800 cold cathode equipment, working with acceleration voltages of 7 and 15 kV. A 20 mm2 Oxford X-Max system coupled to the electron microscope with a resolution of 125 eV (Mn Kα) was used for EDS microanalyses. Samples were previously sputter-coated with graphite on a JEOL JEE4b vaporizer to make them conductive. Laser-induced Breakdown Spectrocopy (LIBS) analyses were performed using laser excitation at 266 nm (4th harmonic of a Q-switched Nd: YAG laser (Lotis TII, LS-2147), 15 ns pulses, 1 Hz repetition rate). LIB spectra were recorded using a 0.2 m Czerny-Turner spectrograph (Andor, Shamrock Kymera-193i-A) equipped with a grating of 1800 grooves/mm (blazed at 265 nm) and coupled to a time-gated intensified charge-coupled device (ICCD) camera (Andor Technology, iStar CCD 334, 1024x1024 active pixels, 13 µm x 13 µm pixel). The ICCD detector is synchronized with the Q-Switch output electrical signal that triggers the laser pulse. The laser beam was directed to the surface of the samples by the use of mirrors at an incidence angle of 45°. Focusing with a 10 cm focal length lens allowed fluences in the range of 9–15 J/cm2. LIB spectra were recorded in the 240–600 nm wavelength range using a step and glow mode at intervals of 30 nm. The spectra were acquired at a 0.17 nm resolution with a gate delay and width of 200 nanoseconds and 3 microseconds, respectively. For higher wavelengths, a cut-off filter at 300 nm was placed in front of the entrance window of the spectrograph to reduce the scattered laser light and to avoid second-order diffractions. An Ocean Optics HR 4000 CG equipment was used for UV–Vis spectrophotometry. Spectra were acquired by absorption or reflection and recorded in the 200–1000 nm wavelength range. XRF analysis was recorded with a PANalytical instrument, model Magi-X, of wavelength dispersion provided with an X-ray tube of rhodium anode (2.4 kW). Analytical recordings were accomplished using the IQ + software (PANalytical) based on fundamental patterns of synthetic oxides and natural minerals. Samples were prepared in a Perl’X3 Philips instrument starting from the powdered glasses and compacting them as pearls by melting at 1100 ºC (homogeneous mixture of 0.3 g of powdered glass with 5.5 g Li2B4O7). Data life: 2025- (unlimited validity), This is the experimental dataset used in the paper Talanta, 286: 127510 (2025) (http://hdl.handle.net/10261/380008) in which through a multi-analytical approach modern and historic glass beads are analysed to provide markers that allows unmasking imitations, counterfeiting, and forgerie. In total 9 historical glass beads (H-01 to H-09) from archaeological excavations in Spain and Mozambique (Late iron age, 7th and 12th century AD) and 12 modern glass beads (M-01 to M-12) of similar colour and transparency than the historical one were analysed via X-ray Fluorescence (XRF), Field Emission Scanning Electron Microscopy-Energy Dispersive X-ray Spectroscopy (FESEM-EDS), UV-Vis spectrophotometry, X-ray diffraction (XRD), and Laser Induced Breakdown Spectroscopy (LIBS). This data set includes the results of their chemical characterization., This research has been funded by MCIN/AEI/10.13039/501100011033/FEDER, UE through the project PID2022-137017OBI00 and by the Regional Government of Madrid through the project TEC Heritage-CM (TEC-2024/TEC-39). A. Pinilla acknowledges a PhD contract from the Regional Government of Madrid (PIPF-2023/PH-HUM-29465)., GLASS BEADS: Glass_beads_readme.txt, H-01.jpg, H-02.jpg, H-03.jpg, H-04.jpg, H-05.jpg, H-06.jpg, H-07.jpg, H-08.jpg, H-09.jpg, M-01.jpg, M-02.jpg, M-03.jpg, M-04.jpg, M-05.jpg, M-06.jpg, M-07.jpg, M-08.jpg, M-09.jpg, M-10.jpg, M-11.jpg, M-12.jpg FESEM-EDS folder: FESEM-EDS_readme.txt, EDS_H.csv, EDS_Microzones.csv, FESEM_H-01.tif, FESEM_H-03.tif, FESEM_H-08.tif, FESEM_H-09.tif, FESEM_M-09.jpg, FESEM_M-10.jpg, FESEM_M-11-A.jpg, FESEM_M-11-B.jpg LIBS folder: LIBS_readme.txt, LIBS_H-01.csv, LIBS_H-02.csv, LIBS_H-03_black.csv, LIBS_H-03_white.csv LIBS_H-04.csv, LIBS_H-05.csv, LIBS_H-06.csv, LIBS_H-07.csv, LIBS_H-08.csv, LIBS_H-09.csv, LIBS_M-01.csv, LIBS_M-02.csv, LIBS_M-03.csv, LIBS_M-04.csv, LIBS_M-05.csv, LIBS_M-06.csv, LIBS_M-07.csv, LIBS_M-08.csv, LIBS_M-09.csv, LIBS_M-10_core.csv, LIBS_M-10_surface.csv, LIBS_M-11.csv, LIBS_M-12.csv UV-VIS folder: UV-VIS_readme.txt, UV-VIS_H-01.csv, UV-VIS_H-02.csv, UV-VIS_H-04.csv, UV-VIS_H-06.csv, UV-VIS_H-08.csv, UV-VIS_M-01.csv, UV-VIS_M-02.csv, UV-VIS_M-03.csv, UV-VIS_M-04.csv, UV-VIS_M-05.csv, UV-VIS_M-06.csv, UV-VIS_M-07.csv, UV-VIS_M-08.csv, UV-VIS_M-12.csv XRF folder: XRF_readme.txt, XRF_M.csv O, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integrated Comprehensive Characterization of Black Crusts from Milan’s Monumental Cemetery: A Synergistic Approach Combining Conventional and Unconventional Analytical Techniques

  • Bergomi, Andrea
  • Comite, Valeria
  • Borelli, Mattia
  • Lombardi, Chiara Andrea
  • Festa, Elisa
  • Oujja, Mohamed
  • Castillejo, Marta
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Crespo, Ana
  • Pirovano, Michela
  • Fermo, Paola
This article belongs to the Special Issue History, Conservation and Restoration of Cultural Heritage, Black crusts are degradation features found on stone buildings, offering valuable insights into local pollution sources. Their composition and structure reflect environmental conditions, making them important indicators for environmental and conservation studies. In this study, black crusts collected from funerary monuments in the Monumental Cemetery of Milan were comprehensively characterized using SEM-EDX, Raman spectroscopy, LIBS, and oxidative potential (OP) assays. SEM-EDX and Raman spectroscopy revealed extensive degradation of the substrate and the incorporation of pollutant-derived particles, with heavy metals such as Fe, Zn, and Pb detected in more than 90% of the samples. Correlation analysis proved effective in distinguishing major pollution sources, primarily vehicular and railway traffic, indicated by strong associations such as Zn–Mn (r = 0.896), Fe–Zn (r = 0.734), and Fe–Mn (r = 0.655), from minor sources linked to industrial emissions, reflected in correlations including Ti–Pb (r = 0.589), Pb–Cl (r = 0.702), and S–Pb (r = 0.661). Instead, LIBS analysis confirmed stratigraphic penetration of these elements beyond the surface layers, suggesting long-term accumulation. OP assays, applied here for the first time to black crusts, showed values between 0.5 and 3.0 pmol min−1 µg−1, indicating moderate oxidative reactivity linked to metal content. Overall, the findings contribute to a deeper understanding of pollution-driven stone decay and support the development of more effective diagnostic and conservation strategies., This work was partly funded by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034) through a Fixlab Transnational Access. Funding from the Spanish State Research Agency (AEI) through project PID2022-137017OB-I00/AEI/1013039/501100011033, Regional Government of Madrid through the project TEC Heritage-CM (TEC-2024/TEC-39) and the support by CSIC Platform “Open Heritage: Research and Society” (PTI-PAIS) is also acknowledged. The project was also funded by the European Union—NextGenerationEU under the National Recovery and Resilience Plan (PNRR)—Mission 4 Education and research—Component 2 From research to business—Investment 1.3, Notice D.D. 341 of 15 March 2022, entitled: Cultural Heritage Active Innovation for Sustainable Society proposal code PE0000020-CUPG53C22000430006, duration until 28 February 2026., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ageing-induced changes in varnish-coated oil paints: Surface and subsurface multi-technical analysis

  • Dal Fovo, Alice
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Fontana, Raffaella
  • Rosi, Francesca
  • Alunni Cardinali, Martina
  • Romani, Aldo
  • Comez, Lucia
  • Riminesi, Cristiano
  • Iwanicka, Magdalena
  • Targowski, Piotr
  • Kowalska, Magdalena
  • Philippidis, Aggelos
  • Pouli, Paraskevi
  • Castillejo, Marta
  • Oujja, Mohamed
14 pages, 8 figures, Preventing varnish degradation is a major challenge in painting conservation. Despite extensive research, the mechanisms behind varnish alteration are not yet fully understood due to the complexity of the concurrent processes involved. Moreover, the extent to which organic and inorganic pigments, dispersed in various binding media within the paint substrate, influence this process remains unclear. Due to this complexity, detecting early signs of varnish degradation is a crucial step in protecting the underlying painting from irreversible damage. This study aimed to evaluate the effects of thermo-hygrometric and photochemical ageing at both surface and subsurface levels on natural (dammar resin) and synthetic (acrylic resin) coatings. These were analysed both as standalone layers and in combination with oil paint materials containing two common inorganic pigments: titanium dioxide and yellow ochre. A comprehensive suite of complementary, non-invasive techniques, spanning nano- to macroscale resolution, was employed. This optimized monitoring protocol, with potential in situ applicability, enabled high-resolution mapping of varnish degradation patterns, elucidating the complex interplay between compositional factors, environmental ageing conditions, and substrate-paint interactions. This study establishes a robust framework for evaluating material stability through the identification of early degradation markers, which can directly inform conservation strategies for painted artworks. Furthermore, it provides scientific support for varnish selection criteria, condition assessment protocols, and predictive conservation models., The research was funded by H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034), PNRR H2IOSC (Humanities and Cultural Heritage Italian Open Science Cloud) Project (IR0000029) -CUP_B63C22000730005, funded by Next Generation EU. Funding from MCIN/AEI/10.13039/501100011033/FEDER, UE through the project PID2022-137017OB-I00 and from the Regional Government of Madrid through the project TEC Heritage-CM (TEC-2024/TEC-39), and support from the CSIC Interdisciplinary Platform “Open Heritage: Research and Society” (PTI-PAIS) are acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectroanalytical approach for analysis of archaeological objects related to personal adornment from Teruel Museum

  • Maestro-Guijarro, Laura
  • Punter, Pilar
  • Menasalvas, Francisco Javier
  • Crespo, Ana
  • Sánchez-Cortés, Santiago
  • Fort González, Rafael
  • Álvarez de Buergo, Mónica
  • Carmona-Quiroga, Paula
  • Castillejo, Marta
  • Oujja, Mohamed
11 pages, 4 figures, 5 tables, The immense variety of materials found in museum's archaeological collections often makes the tasks of cataloging and conservation difficult. This is even more challenging when dealing with objects related to personal adornments, such as jewelry or amulets, due to their extensive material diversity and complexity. For these reasons, the chemical characterization of this type of objects is crucial for linking the use of certain raw materials in the production of artifacts with commercial and influential spheres. The present study aims at the non/micro-invasive material characterization of a set of heterogeneous personal adornment pieces from a wide chronological period (2nd BC – 18th AD centuries) belonging to the archaeology collection of the Teruel Museum, Spain. A multi-analytical approach, without sample taking, was applied involving Laser-Induced Breakdown Spectroscopy (LIBS), which allowed surface and in-depth elemental analysis of materials including the detection of trace elements. The LIBS results were complemented by using portable X-ray fluorescence spectrometry (p-XRF) and µ-Raman spectroscopy, which offered additional information on elemental and molecular surface composition, respectively, for accurate mineralogical identification. The analysis of the considered objects revealed the presence of a wide variety of both organic and inorganic materials that were used in the manufacturing processes, including red coral, black amber, glass, and iron, among others. This allowed for a comprehensive characterization and provided extensive details about the provenance and relative dating of the objects, information that will be useful in the elaboration of an updated catalog list and new conservation protocols for the archaeological collection of the Teruel Museum., This research is partially funded by the E-RIHS.es Spanish node of E-RIHS (European Research Infrastructure for Heritage Science) through the CSIC Program for Large European Research Infrastructures 2022, grant INFRA20004, where access was provided by the Laser Laboratory for Heritage Science at Instituto de Química Física Blas Cabrera, with the collaboration of PetroLab (Petrophysic Laboratory, Geosciences Institute, CSIC). We also acknowledge the financial support from MCIN/AEI/10.13039/501100011033/FEDER, UE through the project PID2022-137017OB-I00 and Regional Government of Madrid through the project TEC Heritage-CM (TEC-2024/TEC-39), and the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034). Support by the CSIC Platform “Open Heritage: Research and Society” (PTI-PAIS) and the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI) are also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multianalytical Study of Amuletic and Talismanic Islamic-African Paper Manuscripts in the Slovene Ethnographic Museum

  • Elnaggar, Abdelrazek
  • Mahgoub, Hend
  • Maestro-Guijarro, Laura
  • Crespo Ibáñez, Ana
  • Carmona-Quiroga, Paula
  • Sánchez-Cortés, Santiago
  • Rehar, Žiga
  • Kos, Gregor
  • Ameen, Ahmed
  • Frelih, Marko
  • Strlič, Matija
  • Oujja, Mohamed
  • Castillejo, Marta
18 pages, 8 figures, In contrast to its European counterpart, Islamic papermaking is still little researched, especially in scientific and conservation contexts. This study presents the first in-depth material analysis of a unique collection of Islamic-African amulets and talismans from the nineteenth and twentieth centuries, held at the Slovene Ethnographic Museum. This research employed a multi-analytical approach that included pH measurements, analysis of fibrous materials, iodine test for the presence of starch, hyperspectral imaging (HSI), FTIR-ATR, Raman spectroscopy, laser-induced fluorescence (LIF), and laser-induced breakdown spectroscopy (LIBS), as well as cultural interpretations. Twelve selected manuscripts were examined to characterize paper, inks, dyes, and calligraphic features. The results showed the use of iron gall inks, plant-based dyes, and mixed paper fibers (straw and softwood pulp), suggesting a mixture of local and imported materials from the colonial period. The calligraphic and decorative styles reflect a synthesis of orthodox Qur'an and local West African Sufi traditions, often incorporating protective texts, magic squares, and regional variants of Kufic script. The findings shed light on technological aspects of Islamic manuscript production in West Africa and support the informed conservation, display, and interpretation of these culturally and spiritually significant objects. This research sets a precedent for comparative heritage studies and enhances the understanding of Islamic material culture in African contexts., This work was supported by EU Horizon IPERION HS project (IntegratedPlatform for the European Research Infrastructure on Heritage Science);Slovenian node of the European Research Infrastructure for HeritageScience (infrastructure program I0-E012 of the Slovenian Researchand Innovation Agency); Programme Group N-DAD (P1-0447) at theFaculty of Chemistry and Chemical Technology at the University of Ljubljana (Slovenia); 20-RSUL.SLOVENILE.129 ARIS-RSF project) atthe Faculty of Chemistry and Chemical Technology at the Universityof Ljubljana (Slovenia); ARRS WEAVE project (ABC, N1-0271) at theFaculty of Chemistry and Chemical Technology at the University ofLjubljana (Slovenia); ARRS WEAVE project (SafeSilk, N1-250) at theFaculty of Chemistry and Chemical Technology at the University ofLjubljana (Slovenia); PID2022-137017OB-I00 project from MCIN/AEI/10.13039/501100011033/FEDER, UE; TEC Heritage-CM (TEC-2024/TEC-39) project from Regional Government of Madrid; “OpenHeritage and Research and Society” (PTI-PAIS) project from CSIC Interdisciplinary Platform, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A laser-based bottom-up approach for the characterization and conservation of historical textiles

  • Maestro-Guijarro, Laura
  • Castillejo Striano, Marta
  • Oujja, Mohamed
  • García, Verónica
  • López, Almudena
  • Siano, Salvatore
  • Agresti, Juri
  • Osticioli, Iacopo
  • Ciofini, Daniel
  • Carmona-Quiroga, Paula
Poster presented at LACONA XIV (Lasers in the Conservation of Artworks), Bucharest, Romania, 09-12 September 2025. Awarded MDPI prize for the best scientific poster, Lasers are versatile tools applied across fields such as nanofabrication, spectroscopy, and conservation of cultural heritage. Their broad applicability and selective action make them especially valuable in conservation studios for cleaning delicate materials like paintings, paper, textiles, and ethnographic artifacts. The present study highlights the multifunctionality of laser-based techniques through a multi-step investigation involving the material characterization and laser cleaning of three historical tapestries (16th–18th century) provided by the Royal Tapestry Factory, Madrid. A multi-analytical approach, comprising Optical Microscopy (OM), Diffuse Reflectance Fourier-Transform Infrared Spectroscopy (DR-FTIR), Fibre Optics Reflectance Spectroscopy (FORS), Colorimetry and UV-induced fluorescence photography, was used to characterize materials and assess surface changes following laser treatment. The latter was performed using a 1064 nm Long Q-Switched Nd:YAG laser (120 ns pulses), as proved to be the most effective and safe wavelength for cleaning textile materials dyed with organic colorants. Key findings of this study include the identification by DR-FTIR of silk and wool as the primary textile materials. μ-Raman and Surface Enhanced Raman Spectroscopy (SERS) were used to identify organic dyes. SERS was performed by extracting dyes via acid hydrolysis and enhancing the signal with silver nanoparticles synthesized by laser ablation in water (1064 nm, Q-switched, 20 Hz). The SERS protocol successfully revealed the presence of weld, alizarin, and cochineal dyes, while μ-Raman confirmed the presence of indigo in blue regions. Preliminary laser cleaning tests demonstrated that, within the optimal fluence range of 0.5–1.0 J/cm², efficient dust removal was achieved without inducing optical or chemical alterations to the substrate. This work represents a meaningful step forward in the field of textile conservation, demonstrating the potential of laser technologies for the safe and effective cleaning of dyed historical fabrics., The present work has been supported by Spanish MCIN/AEI, project PID2022-137017OB-I00, Regional Government of Madrid, project TEC Heritage-CM (TEC-2024/TEC-39), and the Horizon Europe Project, iPhotoCult (Project number: 101132448). L. Maestro-Guijarro also thanks CSIC for iMOVE24103 support for an international stay in the LASBEC group (IFAC-CNR). Support by the CSIC Platform “Open Heritage: Research and Society” (PTI-PAIS) is also acknowledged, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Analyses and IR laser cleaning assessment of ancient tapestries from Royal Tapestry Factory, Madrid

  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Castillejo Striano, Marta
  • Oujja, Mohamed
  • García, Verónica
  • López, Almudena
  • Siano, Salvatore
  • Agresti, Juri
  • Osticioli, Iacopo
  • Ciofini, Daniele
Paper presented at the III PhDay Campus Serrano CSIC, Madrid, June 12th, 2025, In the field of Heritage Science, laser cleaning of textiles has been a challenging topic for years. As a promising cleaning method for different artwork materials, such as stone, metals or paintings, several studies have been carried out to test the adequacy of this method for textiles, as it is contactless and does not require humectants or water [1]. The present work concerns the laser cleaning of three historical tapestry pieces from the 16th – 18th centuries provided by the Royal Tapestry Factory, Madrid, Spain. The historical textile samples with colored threads were characterized before and after laser irradiation using a multianalytical approach to assess the suitability and feasibility of the laser cleaning method. The cleaning tests were performed with a Long-Q-Switched (LQS) Nd:YAG laser at its fundamental wavelength (1064 nm, 120 ns) with different laser fluences, from 0.1 to 1.8 J/cm2. The multianalytical study includes the techniques of Optical Microscopy (OM), Diffuse Reflectance Fourier-Transform Infrared Spectroscopy (DR-FTIR), µ-Raman spectroscopy and Surface Enhanced Raman Spectroscopy (SERS), Vis-NIR Reflectance Spectroscopy (Vis-NIR RS), and Colorimetry. DR-FTIR was used to determine the nature of the warp and weft fibers [2]. Additionally, µ-Raman and SER spectroscopies served to identify the organic colorants used for dying the textile threads [3]. To select the best laser wavelength, Vis-NIR RS measurements were performed in every color tone of the tapestries. These measurements helped us to decide on the use of 1064 nm for laser cleaning of the pieces. Finally, OM and Colorimetry were performed before and after laser irradiation in selected areas of the pieces to assess the dust removal and possible discoloration/damage of the fibers at used fluences. The present work has revealed that silk is the main manufacturing material and that the colorants used were, among others, indigo and alizarin. Regarding laser cleaning effects, the promising preliminary results indicate efficient removal of dust and the absence of color changes on the remaining textile., The present work has been supported by Spanish MCIN/AEI, project PID2022-137017OB-I00, Regional Government of Madrid, project TEC Heritage-CM (TEC-2024/TEC-39), and the Horizon Europe Project, iPhotoCult (Project number: 101132448). L. Maestro-Guijarro also thanks CSIC for iMOVE24103 support for an international stay in the LASBEC group (IFAC CNR). Support by the CSIC Platform “Open Heritage: Research and Society” (PTI-PAIS) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Integrated Comprehensive Characterization of Black Crusts from Milan’s Monumental Cemetery: A Synergistic Approach Combining Conventional and Unconventional Analytical Techniques

  • Bergomi, Andrea
  • Comite, Valeria
  • Borelli, Mattia
  • Lombardi, Chiara Andrea
  • Festa, Elisa
  • Oujja, Mohamed
  • Castillejo, Marta
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Crespo-Ibáñez, Ana
  • Pirovano, Michela
  • Fermo, Paola
21 pages, 12 figures, 4 tables . -- This article belongs to the Special Issue History, Conservation and Restoration of Cultural Heritage, Black crusts are degradation features found on stone buildings, offering valuable insights into local pollution sources. Their composition and structure reflect environmental conditions, making them important indicators for environmental and conservation studies. In this study, black crusts collected from funerary monuments in the Monumental Cemetery of Milan were comprehensively characterized using SEM-EDX, Raman spectroscopy, LIBS, and oxidative potential (OP) assays. SEM-EDX and Raman spectroscopy revealed extensive degradation of the substrate and the incorporation of pollutant-derived particles, with heavy metals such as Fe, Zn, and Pb detected in more than 90% of the samples. Correlation analysis proved effective in distinguishing major pollution sources, primarily vehicular and railway traffic, indicated by strong associations such as Zn–Mn (r = 0.896), Fe–Zn (r = 0.734), and Fe–Mn (r = 0.655), from minor sources linked to industrial emissions, reflected in correlations including Ti–Pb (r = 0.589), Pb–Cl (r = 0.702), and S–Pb (r = 0.661). Instead, LIBS analysis confirmed stratigraphic penetration of these elements beyond the surface layers, suggesting long-term accumulation. OP assays, applied here for the first time to black crusts, showed values between 0.5 and 3.0 pmol min<sup>−1</sup> µg<sup>−1</sup>, indicating moderate oxidative reactivity linked to metal content. Overall, the findings contribute to a deeper understanding of pollution-driven stone decay and support the development of more effective diagnostic and conservation strategies., This work was partly funded by the H2020 European project IPERION HS (Integrated Platform for the European Research Infrastructure ON Heritage Science, GA 871034) through a Fixlab Transnational Access. Funding from the Spanish State Research Agency (AEI) through project PID2022-137017OB-I00/AEI/1013039/501100011033, Regional Government of Madrid through the project TEC Heritage-CM (TEC-2024/TEC-39) and the support by CSIC Platform “Open Heritage: Research and Society” (PTI-PAIS) is also acknowledged. The project was also funded by the European Union—NextGenerationEU under the National Recovery and Resilience Plan (PNRR)—Mission 4 Education and research—Component 2 From research to business—Investment 1.3, Notice D.D. 341 of 15 March 2022, entitled: Cultural Heritage Active Innovation for Sustainable Society proposal code PE0000020-CUPG53C22000430006, duration until 28 February 2026., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Beyond pigment: Integrated organic and inorganic analysis of cosmetic residues in pre-Islamic archaeological shells from Southeast Arabia

  • Lombardi, Chiara Andrea
  • Sabatini, Francesca
  • Esposti, Michele Degli
  • Zerboni, Andrea
  • Comite, Valeria
  • Lotti, Paolo
  • Crippa, Gaia
  • Galli, Giulia
  • Castillejo, Marta
  • Oujja, Mohamed
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Crespo Ibáñez, Ana
  • Sánchez-Cortés, Santiago
  • Fermo, Paola
This study presents the results of a multi-analytical strategy implemented to investigate the composition of pigments preserved within the shells of marine bivalves recovered from six archaeological sites from the Late Bronze Age to the 6th-7th century CE in the present-day United Arab Emirates. The analysed bivalve specimens contain greenish or blackish materials in the shell interior and according to current archaeological interpretations they have functioned as cosmetic containers in daily life and as grave goods, a hypothesis supported by their recovery in both settlement and burial contexts. Their presence in funerary contexts, however, paired with ethnological observations, suggests these pigments were also endowed with curative powers. The main purpose of this study is to characterize the chemical composition of pigments and to assess their compatibility with proposed uses, particularly their potential application in cosmetics, while recognizing that such interpretations cannot be based on chemical data alone and must also rely on contextual archaeological evidence. To achieve this, a suite of complementary analytical techniques was employed. Scanning Electron Microscopy with Energy Dispersive X-ray (SEM-EDX), Laser-Induced Breakdown Spectroscopy (LIBS), Fourier-Transform Infrared Spectroscopy in Attenuated Total Reflectance (ATR-FTIR), Raman Spectroscopy, X-Ray Diffraction (XRD) techniques were used to explore the elemental and mineralogical features of samples while Gas Chromatography coupled with Mass Spectrometry (GC/MS) provided insights into organic components, not achievable through inorganic-focused techniques. The results reflect the varying analytical confidence achievable for these complex samples: while the inorganic fraction was robustly characterized, the organic findings remained more constrained. A total of 34 samples were examined and grouped into 2 main categories based on pigment colour: green and black. The green pigments commonly exhibited elevated concentrations of copper, frequently associated with minerals such as atacamite, paratacamite, or brochantite. In contrast, the black pigments revealed the presence of carbon-based black pigments and, in minority cases, Mn-bearing minerals, such as braunite, and organic-based pigments, as bitumen. The fatty acids detected in three green pigments and one black pigment suggest the presence of lipid material of animal origin, possible due to mollusc soft tissue remains, while the use of an adding binder cannot be assessed. Overall, the results obtained through this integrated multi-analytical approach, not only improve understanding of the substances stored within malacofaunal containers but also support the hypothesis that at least some of the materials were possibly related to cosmetic practices, allowing for the reconstruction of aspects of daily and ritual life in ancient Magan., The continuous help of the Italian Embassy in the UAE during the excavations is deeply appreciated. Gianluca Carabelli from Dipartimento di Chimica, Università di Milano is gratefully acknowledged for his contribution in GC/MS sample preparation and Davide Comboni from Dipartimento di Scienze della Terra “Ardito Desio”, Università degli Studi di Milano for his assistance in carrying out the XRD analyses. Kevin Lidour, Director of the French Archaeological Mission in the UAE, is gratefully acknowledged for providing the samples from Masafi. This project was funded by the European Union – NextGenerationEU, under the National Recovery and Resilience Plan (NRRP), Mission 4, Component 2, Investment Line 1.3, specifically within Spoke 6 (History, Conservation and Restoration of Cultural Heritage). The archaeological research at Tell Abraq is supported by the Zayed National Museum (grant entrusted to MDE) and by the Italian Ministry of Foreign Affairs and International Cooperation (grants entrusted to AZ). Part of this research was supported by the Italian Ministry of University and Research (MUR) through the project “Dipartimenti di Eccellenza 2023–2027” awarded to the Dipartimento di Scienze della Terra “A. Desio” of the Università degli Studi di Milano (WP3). Funding from the Spanish State Research Agency (AEI) through project PID2022-137017OB-I00/AEI/1013039/501100011033, Regional Government of Madrid through the project TEC Heritage-CM (TEC-2024/TEC-39) and the support by CSIC Platform “Open Heritage: Research and Society” (PTI-PAIS) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Varnish-coated oil paints under laser treatment: Comparative surface- and depth-resolved assessment of 213 nm (15 ns), 266 nm (15 ns), and 2940 nm (160 µs) ablation regimes

  • Ciofini, Daniele
  • Maestro-Guijarro, Laura
  • Carmona-Quiroga, Paula
  • Osticioli, Iacopo
  • Castillejo, Marta
  • Siano, Salvatore
  • Oujja, Mohamed
This study employs a multi-analytical, non-invasive approach to compare the physico-chemical modifications induced by 213, 266 nm (15 ns pulse duration) and 2940 nm (160 µs) lasers in the removal of varnish films from oil paintings. Artificially aged oil paint films coated with dammar and sandarac varnishes were irradiated at threshold and supra-thresholds fluence levels. Ablation depths, residual varnish thickness (zvar) and structural changes following laser processing were non-destructively quantified via Multiphoton Excitation Fluorescence (MPEF) depth profiling. Differential Interference Contrast (DIC) microscopy revealed that morphological effects are highly wavelength-dependent. While 266 nm and 2940 nm pulses induced surface texturing via photothermal mechanisms, 213 nm irradiation promoted photolytic bond cleavage, resulting in controlled, micrometric layer-by-layer ablation. Diffuse Reflectance FTIR (DR-FTIR) and Laser-Induced Fluorescence (LIF) confirmed that physicochemical modifications may occur at 266 and 2940 nm in the underlying paint when zvar is lower than the optical penetration depth. These results provide important insights into laser-matter interactions, identifying 213 nm as an effective method for “dry” surface cleaning of picture varnishes. Conversely, 266 nm and 2940 nm lasers are better suited for integration into hybrid, solvent-based protocols, where the laser facilitates subsequent removal by mild cleaning agents., The present work has been supported by the H2020 European project IPERION HS (GA 871034), by Spanish MCIN/AEI, project PID2022-137017OB-I00, by Regional Government of Madrid, project TEC Heritage-CM (TEC-2024/TEC-39), and by the Horizon Europe Project, iPhotoCult (Project number: 101132448). Financial support for FixLab TransNational Access (TNA) activities (IPERION HS GA n.871034) for the proposal “FILMS ON TOP - Fluorescence Investigations of Laser-Modified Surfaces for improving Photonics Treatments of Oil Paintings” is gratefully acknowledged. Maestro-Guijarro thanks CSIC for the contract within the framework of the Special Intramural Project (PIE) – ref. 202680E012. Support by the CSIC Platform “Open Heritage: Research and Society” (PTI-PAIS) is also acknowledged., Peer reviewed