Pasar al contenido principal

CONTROL DE LA NANOESTRUCTURA EN POLIMEROS CON APLICACIONES EN ENERGIA. IMPLICACIONES FUNDAMENTALES EN LAS PROPIEDADES FISICAS Y SU APLICABILIDAD.

MAT2014-59187-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Relaxation and Conductivity in P3HT/PC71BM Blends As Revealed by Dielectric Spectroscopy

  • Cui, Jing
  • Martínez-Tong, Daniel E.
  • Sanz, Alejandro
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
  • Nogales, Aurora
The conduction mechanism and the molecular dynamics on the paradigmatic bulk heterojunction formed by poly(3-hexylthiophene) (P3HT) and phenyl-C71-butyric acid methyl ester (PCBM) blends have been characterized by dielectric spectroscopy. The results show that hexyl lateral chains of the polymer exhibit a high frequency local motion, similar to a polyethylene-like relaxation. By dielectric spectroscopy the dependence with temperature of the conductivity has also been studied. The results in the low temperature region provide a method to estimate the energy offsets of the system due to the presence of the C71 derivative. In the high temperature region, the temperature dependence of the conductivity can be described by the Gaussian disorder model, and we have observed that the energetic disorder in this region does not depend upon the content of PCBM in the blends., This work has been supported by Spanish Ministry of Economy under the project MAT2014-59187-R, MAT2012-33517, and CTQ 2013-43086-P. J.C. acknowledges the China Scholarship Council for funding her research. E.R. thanks MINECO for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-assembly of thermo and light responsive amphiphilic linear dendritic block copolymers

  • García-Juan, Hugo
  • Nogales, Aurora
  • Blasco, Eva
  • Ezquerra, Tiberio A.
  • Piñol, Milagros
  • Oriol, Luis
et al., The synthesis and structural characterization of a new dual responsive linear-dendritic block copolymer (LDBC) is presented. The LDBC is constituted by a thermoresponsive linear block from polymethacrylate of oligo- and diethylene glycol, and a light responsive dendron block of bis-MPA decorated at the periphery with 4-isobutyloxyazobenzene and alkyl chains in a 50:50 M ratio. Blocks are coupled together by copper(I) catalyzed alkyne–azide cycloaddition (CuAAC). The ability of the LDBC to form vesicle self-assemblies in water is described, as well as the effect of light and temperature on the vesicles morphology, on the basis of transmission electron microscopy (TEM), dynamic light scattering (DLS) and UV–vis spectroscopy studies. The effect of UV light and temperature on the vesicles structure by SAXS and WAXS conducted on real time is also presented. Finally, the potential use of the vesicles to load and stimuli controlled release of small fluorescent molecules is probed., This work was supported by the MINECO, Spain, under the projects MAT2014-55205-P, MAT2014-59187-R, MAT2012-33517 and FEDER. Financial support from Gobierno de Aragón and Fondo Social Europeo is also acknowledged. H. García-Juan acknowledges Gobierno de Aragón for his PhD grant., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Light-responsive self-assembled materials by supramolecular post-functionalization via hydrogen bonding of amphiphilic block copolymers

  • Concellón, Alberto
  • Blasco, Eva
  • Ezquerra, Tiberio A.
  • Nogales, Aurora
  • Piñol, Milagros
  • Oriol, Luis
A new class of light-responsive supramolecular amphiphilic block copolymers (BCs) based on the association through multiple H-bonding between 4-isobutyloxyazobenzene motifs and 2,6-diacylaminepyridine units is reported. Block copolymers containing 2,6-diacylaminopyridine side units, as hydrophobic block, and poly(ethylene glycol), as a hydrophilic segment, were functionalized with either a carboxylic acid azodendron, via double H-bonding, or a thymine azobenzene, via triple H-bonding. The structural and thermal characterization of these supramolecular azo-copolymers in bulk and solution is presented. The work emphasizes the self-assembly of these supramolecular polymers in water and the study of their UV-light responsive properties by UV-vis spectroscopy, dynamic light scattering (DLS), transmission electron microscopy (TEM), and synchrotron small-angle X-ray (SAXS). The present noncovalent postpolymerization functionalization strategy has provided stable self-assemblies in water with light responsive properties that can be used to load and trigger the delivery of small fluorescent molecules., This work was supported by the MINECO, Spain, under Projects MAT2014-59187-R and MAT2014-55205-P, FEDER funding, and Aragon Government. A.C. acknowledges MINECO for his Ph.D. grant. A.M.-F. expresses thanks for the financial support of the Generalitat Valenciana for his APOSTD/2013/054 grant., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Self-assembly in water and dual stimuli-responsive behaviour of a linear-dendritic block copolymer

  • García-Juan, Hugo
  • Nogales, Aurora
  • Blasco, Eva
  • Ezquerra, Tiberio A.
  • Oriol, Luis
  • Piñol, Milagros
Resumen del trabajo presentado al V Encuentro sobre Dendrímeros, celebtrado en Zaragoza (España) del 25 al 26 de enero de 2016.-- et al., The synthesis and structural characterization of a new dual responsive linear-dendritic block copolymer (LDBC) is presented. The LDBC is constituted by a thermoresponsive linear block from polymethacrylate of oligo- and diethylene glycol, and a light responsive dendron block of bis-MPA decorated at the periphery with 4-isobutyloxyazobenzene and alkyl chains in a 50:50 M ratio. Blocks are coupled together by copper(I) catalysed alkyne–azide cycloaddition (CuAAC). The ability of the LDBC to form vesicle self-assemblies in water is described, as well as the effect of light and temperature on the vesicles morphology, on the basis of transmission electron microscopy (TEM), dynamic light scattering (DLS) and UV–vis spectroscopy studies. The effect of UV light and temperature on the vesicles structure by SAXS and WAXS conducted on real time is also presented. Finally, the potential use of the vesicles to load and stimuli controlled release of small fluorescent molecules is probed., This work was supported by the MINECO, Spain, under the projects MAT2014-55205-P, MAT2014-59187-R, MAT2012-33517 and FEDER., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser-induced periodic surface structures on P3HT and on its photovoltaic blend with PC71BM

  • Cui, Jing
  • Rodríguez-Rodríguez, Álvaro
  • Hernández, Margarita
  • García-Gutiérrez, Mari Cruz
  • Nogales, Aurora
  • Castillejo, Marta
  • Moseguí González, Daniel
  • Müller-Buschbaum, P.
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
8 págs.; 9 figs., We describe the conditions for optimal formation of laser-induced periodic surface structures (LIPSS) over poly(3-hexylthiophene) (P3HT) spin-coated films. Optimal LIPSS on P3HT are observed within a particular range of thicknesses and laser fluences. These conditions can be translated to the photovoltaic blend formed by the 1:1 mixture of P3HT and [6,6]-phenyl C-butyric acid methyl ester (PCBM) when deposited on an indium tin oxide (ITO) electrode coated with (poly(3,4-ethylenedioxythiophene): poly(styrenesulfonate) (PEDOT:PSS). Solar cells formed by using either a bilayer of P3HT structured by LIPSS covered by PCBM or a bulk heterojunction with a P3HT:PCBM blend structured by LIPSS exhibit generation of electrical photocurrent under light illumination. These results suggest that LIPSS could be a compatible technology with organic photovoltaic devices. Copyright © 2016 American Chemical Society, This work has been supported by Spanish Ministry of Economy under the projects CTQ 2013-43086-P, MAT2014-59187-R, and MAT2015-66443-C02-1-R. J.C. acknowledges the China Scholarship Council for funding her research (File NO. 201207040083). E.R. and A.R-R thank MINECO for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069) and FPI (BES-2013-062620) contracts, respectively. P.M.-B. and D.M.G. acknowledge financial support by TUM.solar in the frame of the Bavarian Collaborative Research Project “Solar technologies go Hybrid” (SolTec), by the GreenTech Initiative (Interface Science for PhotovoltaicsISPV) of the EuroTech Universities and by the Nanosystems Initiative Munich (NIM). We thank Daniel Hermida and Wim Bras for outstanding support during beamtime in DUBBLE at ESRF. Fruitful comments of A. Urbina are gratefully acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modification of poly(dimethylsiloxane) as a basis for surface wrinkle formation: Chemical and mechanical characterization

  • Campo, Ángel Adolfo del
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Rodríguez-Hernández, Juan
9 págs.; 6 figs., In this manuscript, the processes occurring during UV-ozone treatment on polydimethylsiloxane (PDMS) surfaces i.e. formation of a stiff silica-like layer and surface degradation have been studied. While the chemical changes have been evaluated using Confocal Raman Microscopy (CRM) with submicrometer resolution, partial surface degradation occurring during longer ozone treatments have been evidenced both by Optical Profilometry and AFM. Whereas previous studies reported the formation of a thin silica layer of around 20–30 nm up to 200 nm depending on the method employed, herein, we demonstrated that in effect a thin rigid layer is formed but instead of a sharp interface predicted by previous reports a gradient depth profile was obtained. CRM evidenced the formation of a 4 μm layer of modified material. By Quantitative Nanomechanical Mapping (QNM) and based on the equations that predict the wrinkle formation, a surface layer thickness of around of 4.5 μm was also determined.© 2016 Elsevier Ltd. All rights reserved., The authors gratefully acknowledge support from the Consejo Superior de Investigaciones Científicas (CSIC). Equally, this work was financially supported by the Ministerio de Economía y Competitividad (MINECO) (MAT2013-47902-C2-1-R, MAT2013-48009-C04-1-P, MAT2014-59187-R and MAT2015-66443-C2-1-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

X Ray Photon Correlation Spectroscopy for the study of polymer dynamics

  • Nogales, Aurora
  • Fluerasu, Andrei
11 pags., 6 figs., 1 tab., X Ray Photon Correlation Spectroscopy, XPCS, is a novel technique developed for the study of slow dynamics in condensed matter. The principle of this technique is based on the time variations of the speckle pattern originated by the scattering of coherent light from a material with spatial inhomogeneities. Although laser photon correlation spectroscopy was long established, XPCS has only been possible with the advent of new synchrotron radiation X-ray sources that can provide sufficient coherent flux. The results from these techniques and future perspectives in the field of polymer science are discussed here. © 2016 Elsevier Ltd. All rights reserved., The authors gratefully acknowledge financial support from the MINECO, Spain (MAT2014-59187-R) and from NSLS-II under contract No. DE-SC0012704 with the US Department of Energy., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formation of polymer nanoparticles by UV pulsed laser ablation of poly (bisphenol A carbonate) in liquid environment

  • Martínez-Tong, Daniel E.
  • Sanz, Mikel
  • Ezquerra, Tiberio A.
  • Nogales, Aurora
  • Marco, J.F.
  • Castillejo, Marta
  • Rebollar, Esther
8 pags., 9 figs. 2 tabs., Suspensions of poly(bisphenol A carbonate) (PBAC) nanoparticles of varying size and shape have been produced by ablation of a PBAC target in liquid media with the fourth harmonic of a Q-switched Nd:YAG laser (wavelength 266 nm, full width at half maximum 4 ns, repetition rate 10 Hz). The polymer target was placed at the bottom of a rotating glass vessel filled with around a 10 mm column of liquid. Laser ablation in water leads to spherical nanoparticles with diameters of several tens of nanometers for fluences close to 1 J/cm. Ablation at lower fluences, around 0.1 J/cm, results in the production of nanoparticles of smaller diameters and also of non-spherical nanoparticles. Additional irradiations at the fluence of 0.1 J/cm were performed in several liquid media with different properties, in terms of density, viscosity, thermal conductivity, boiling temperature, isothermal compressibility and polarity. The different size distributions observed were related to the thermal conductivity of the systems, while their viscosity seems to be responsible for the development of nanostructures with different morphologies., AcknowledgementsThe authors gratefully acknowledge financial support fromthe MINECO (CTQ 2013-43086-P, MAT2014-59187-R, MAT2015-66443-C02-1-R). D.E.M. thanks CSIC for the tenure of JAE-Prefellowship and Fondo Social Europeo (FSE) for cofinancing the JAEProgram. E.R. also thanks MINECO for a Ramón y Cajal contract(RYC-2011-08069)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Laser induced periodic surface structures on polymer nanocomposites with carbon nanoadditives

  • Rodríguez-Beltrán, René, I.
  • Paszkiewicz, S.
  • Szymczyk, A.
  • Roslaniec, Z.
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Castillejo, Marta
  • Moreno, Pablo
  • Rebollar, Esther
7 pags., 7 figs., tab., Laser induced periodic surface structures (LIPSS) are formed on poly(trimethylene terephthalate) and its composites with single-walled carbon nanotubes (SWCNT) and with both SWCNT and expanded graphite (EG) upon irradiation with a Q-Switched Nd:YAG laser (266 nm, 8 ns). The morphology of the polymer films was characterized by atomic force microscopy. A cantilever with a colloidal probe was used to obtain information about surface adhesion. Surface energies were estimated by contact angle measurements using different liquids. Chemical modification in the materials upon irradiation was assessed by Raman spectroscopy. Results show a dependence of the number of pulses required for LIPSS formation as a consequence of the presence of the carbon nanoadditive and an increase of the hydrophilic character of surfaces after irradiation. Moreover, the polar component of the surface free energy changes significantly and surface adhesion increases by the addition of the additive to the polymer matrix. Additionally, the adhesion force decreases after laser nanostructuring as a consequence of a lower contact area in the nanostructured material., The authors gratefully acknowledge financial support from the MINECO (FIS2013-44174-P, MAT2014-59187-R, MAT2015-66443-C02-1-R, FIS2015-71933-REDT, CTQ2016- 75880-P) and Junta de Castilla y León (Project SA046U16). RIR is grateful for the International Scholarship number 314197 provided by Consejo Nacional de Ciencia y Tecnología (CONACyT-México) and E.R. thanks MINECO for a Ramón y Cajal contract (RYC- 2011-08069)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantitative Nanomechanical Properties of Multilayer Films Made of Polysaccharides through Spray Assisted Layer-by-Layer Assembly

  • Criado-González, Miryam
  • Rebollar, Esther
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Boulmedais, F.
  • Mijangos, Carmen
  • Hernández, Rebeca
9 pags., 8 figs., 2 tabs., Nanomechanical properties of alginate/chitosan (Alg/Chi) multilayer films, obtained through spray assisted layer-by-layer assembly, were studied by means of PeakForce quantitative nanomechanical mapping atomic force microscopy (PF-QNM AFM). Prepared at two different alginate concentrations (1.0 and 2.5 mg/mL) and a fixed chitosan concentration (1.0 mg/mL), Alg/Chi films have an exponential growth in thickness with a transition to a linear growth toward a plateau by increasing the number of deposited bilayers. Height, elastic modulus, deformation, and adhesion maps were simultaneously recorded depending on the number of deposited bilayers. The elastic modulus of Alg/Chi films was found to be related to the mechanism of growth in contrast to the adhesion and deformation. A comparison of the nanomechanical properties obtained for non-cross-linked and thermally cross-linked Alg/Chi films revealed an increase of the elastic modulus after cross-linking regardless alginate concentration. The incorporation of iron oxide nanoparticles (NPs), during the spray preparation of the films, gave rise to nanocomposite Alg/Chi films with increased elastic moduli with the number of incorporated NPs layers. Deformation maps of the films strongly suggested the presence of empty spaces associated with the method of preparation. Finally, adhesion measurements point out to a significant role of NPs on the increase of the adhesion values found for nanocomposite films., Financial support from MINECO (MAT2014-53437-C2-1-P, MAT2014-59187-R MAT2015-66443-C02-1-R and CTQ2013- 43086-P) is gratefully acknowledged. Rebeca Hernández and Esther Rebollar thank MEC for a Ramón y Cajal contract. Miryam Criado thanks MEC for a FPU fellowship and Técnicas Reunidas S.A. for financial support in Residencia de estudiantes., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Relaxations and relaxor-ferroelectric-like response of nanotubularly confined poly(vinylidene fluoride)

  • Martín, Jaime
  • Iturrospe, Amaia
  • Cavallaro, Andrea
  • Arbe, Arantxa
  • Stingelin, Natalie
  • Ezquerra, Tiberio A.
  • Mijangos, Carmen
  • Nogales, Aurora
Herein, we elucidate the impact of tubular confinement on the structure and relaxation behavior of poly(vinylidene difluoride) (PVDF) and how these affect the para-/ferroelectric behavior of this polymer. We use PVDF nanotubes that were solidified in anodic aluminum oxide (AAO) templates. Dielectric spectroscopy measurements evidence a bimodal relaxation process for PVDF nanotubes: besides the bulk-like α-relaxation, we detect a notably slower relaxation that is associated with the PVDF regions of restricted dynamics at the interface with the AAO pore. Strikingly, both the bulk-like and the interfacial relaxation tend to become temperature independent as the temperature increases, a behavior that has been observed before in inorganic relaxor ferroelectrics. In line with this, we observe that the real part of the dielectric permittivity of the PVDF nanotubes exhibits a broad maximum when plotted against the temperature, which is, again, a typical feature of relaxor ferroelectrics. As such, we propose that, in nanotubular PVDF, ferroelectric-like nanodomains are formed in the amorphous phase regions adjacent to the AAO interface. These ferroelectric nanodomains may result from an anisotropic chain conformation and a preferred orientation of local dipoles due to selective H-bond formation between the PVDF macromolecues and the AAO walls. Such relaxor-ferroelectric-like behavior has not been observed for nonirradiated PVDF homopolymer; our findings thus may enable in the future alternative applications for this bulk commodity plastic, e.g., for the production of electrocaloric devices for solid-state refrigeration which benefit from a relaxor-ferroelectric-like response., J.M. acknowledges support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant, agreement No. 654682. A.A. and A.I. acknowledge financial support from the Spanish Ministry Ministerio de Economia y Competitividad (MINECO) (code: MAT2015-63704-P (MINECO/FEDER, UE)) and the Eusko Jaurlaritza (Basque Government) (code: IT-654-13). A.C. would like to acknowledge the financial support of the EPSRC (EP/M014142/1). A.N., T.A.E., and C.M. acknowledge financial support from MINECO (codes: MAT2014-59187-R, MAT2015-66443-C02-1-R, and MAT2014-53437-C2-1P, respectively). N.S. is in addition grateful for support from a European Research Council ERC Starting Independent Research Fellowship under the grant agreement No. 279587., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Wrinkling and Folding on Patched Elastic Surfaces: Modulation of the Chemistry and Pattern Size of Microwrinkled Surfaces

  • Nogales, Aurora
  • Campo, Ángel Adolfo del
  • Ezquerra, Tiberio A.
  • Rodríguez-Hernández, Juan
8 pags., 5 figs., 2 tabs., An unconventional strategy is proposed that takes advantage of localized high-deformation areas, referred to as folded wrinkles, to produce microstructured elastic surfaces with precisely controlled pattern dimensions and chemical distribution. For that purpose, elastic PDMS substrates were prestretched to a different extent and oxidized in particular areas using a mask. When the stretching was removed, the PDMS substrate exhibited out-of-plane deformations that largely depend on the applied prestretching. Prestretchings below 100% lead to affine deformations in which the treated areas are buckled. On the contrary, prestretchings above ? >100% prior to surface treatment induce the formation of folded wrinkles on those micrometer-size ultraviolet-ozone (UVO) treated areas upon relaxation. As a result, dual periodic wrinkles were formed due to the alternation of highly deformed (folded) and low deformed (buckled) areas. Our strategy is based on the surface treatment at precise positions upon prestretching of the elastic substrate (PDMS). Additionally, this approach can be used to template the formation of wrinkled surfaces by alternating lines of folded wrinkles (valleys) and low-deformed areas (hills). This effect allowed us to precisely tune the shape and distribution of the UVO exposed areas by varying the prestretching direction. Moreover, the wrinkle characteristics, including period and amplitude, exhibit a direct relation to the dimensions of the patterns present in the mask., The authors gratefully acknowledge support from the Consejo Superior de Investigaciones Cientifícas (CSIC). Equally, this work was financially supported by the Ministerio de Economía y Competitividad (MINECO) (Grants MAT2013-47902-C2-1- R, MAT2013-48009-C04-1-P, MAT2014-59187-R, and MAT2015-66443-C2-1-R)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Breath figures of P3HT and of its photovoltaics blend with PC71BM

  • Nogales, Aurora
  • Cui, Jing
  • Rebollar, Esther
  • Campo, Ángel Adolfo del
  • Cotlet, Mircea
  • Rodríguez-Hernández, Juan
New Orleans, Louisiana, March 13–17, 2017. -- http://www.aps.org/meetings/march/, Surface structured lms of poly(3-hexyl thiophene) and of its photovoltaic blend with PC71BM are obtained by the breath gure technique, a micropatterning process that is based on the competition between solvent evaporation and water condensation. By this method, long range honey-comb like ordered structures of these functional organic blends are obtained. The characterization of these systems by several techniques including micron-resolved Raman Spectroscopy, microphotoluminiscence and Kelvin probe microscopy allow to probe that, due to the dierent hydrophobicity of both components of the blend, a hierarchical phase separation is obtained around the pores formed., Mineco (MAT2014-59187-R), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Chain orientation in bulk heterojunction photovoltaic thin films as revealed by Near Edge X-Ray Absorption Fine Structure

  • Gutiérrez-Fernández, Edgar
  • Rodríguez-Rodríguez, Álvaro
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
  • Valvidares, M.
  • Garciani, P.
  • García-Gutiérrez, Mari Cruz
Madrid from October 9-11, 2017. -- https://w3.ual.es/Congresos/AUSE/CONGRESO2017/index_congreso.html, This work has been supported by MINECO (Projects: MAT2014-59187-R, MAT2015-66443-C02-1-R, CTQ 2013- 43086-P)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Functional Polymer Crystallization in Cylindrical Pores

  • Nogales, Aurora
  • Martín, Jaime
APS March Meeting 2017, New Orleans, Louisiana, March 13–17, 2017. -- http://meetings.aps.org/Meeting/MAR17/Session/T1.7, Mineco (MAT2014-59187-R), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Polymer crystallization in nanoparticles

  • Nogales, Aurora
  • Cui, Jing
  • Martínez-Tong, Daniel E.
  • Ezquerra, Tiberio A.
APS March Meeting 2017, New Orleans, Louisiana, March 13–17, 2017. -- http://meetings.aps.org/Meeting/MAR17/Session/T1.7, Crystallizable polymers con ned into nanodroplets and nanoparticles can serve as starting point in order to prepare nanocrystals with speci c functionalities. In addition, They can help to better understand the e ect of con nement on the mechanisms of crystal nucleation and growth. As compared to other con ning geometries, nanoparticles o er the advantage of providing a 3D con nement, without any preferential direction that may act as template. Also, nanoparticles o er a versatile geometry that enables the possibility of tuning the interaction with the con nement media. An example of this can be the di erences among free standing particles or those embedded either in soft or in rigid media. In this contribution we present results on the crystallization of selected conducting and ferroelectric polymers in nanoparticles prepared by miniemulsion and ash precipitation. Results suggest that the polymers crystallized in these geometries present metastable con guration that enhance the presence of mesophases not present in the bulk. The implication of this e ect on the physical properties will be discussed., Mineco (MAT2014-59187-R and MAT2015-66443-C2-1-R), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Nanophase Separation in Laser Induced Periodic Surface Structures (LIPSS) on Bulk Heterogeneous Photovoltaic Thin Films as Revealed by Resonant Soft X-ray Scattering

  • Rodríguez-Rodríguez, Álvaro
  • García-Gutiérrez, Mari Cruz
  • Ezquerra, Tiberio A.
  • Brady, M. A.
  • Wang, C.
  • Rebollar, Esther
Madrid from October 9-11, 2017. -- https://w3.ual.es/Congresos/AUSE/CONGRESO2017/index_congreso.html, This work has been supported by Spanish Ministry of Economy and Competitiveness under the projects MAT2014-59187-R, MAT2015-66443-C02-1-R and CTQ2016-75880-P. E.R. and A.R-R thank MINECO for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069) and FPI (BES-2013-062620) contracts, respectively., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Patterning Conjugated Polymers by Laser: Synergy of Nanostructure Formation in the All-Polymer Heterojunction P3HT/PCDTBT

  • Rodríguez-Rodríguez, Álvaro
  • Rebollar, Esther
  • Ezquerra, Tiberio A.
  • Castillejo, Marta
  • García-Ramos, José Vicente
  • García-Gutiérrez, Mari Cruz
In this work we report a broad scenario for the patterning of semiconducting polymers by laser-induced periodic surface structures (LIPSS). Based on the LIPSS formation in the semicrystalline poly(3-hexylthiophene) (P3HT), we have extended the LIPSS fabrication to an essentially amorphous semiconducting polymer like poly[N-90-heptadecanyl-2,7-carbazole-alt-5,5-(40,70-di-2-thienyl-20,10,30-benzothiadiazole)] (PCDTBT). This polymer shows a good quality and well-ordered nanostructures not only at the 532 nm laser wavelength, as in the case of P3HT, but also at 266 nm providing gratings with smaller pitch. In addition, we have proven the feasibility of fabricating LIPSS in the P3HT/PCDTBT (1:1) blend, which can be considered as a model bulk-heterojunction for all-polymer solar cells. In spite of the heterogeneous roughness, due to phase separation in the blend, both P3HT and PCDTBT domains present well-defined LIPSS as well as a synergy for both components in the blend when irradiating at wavelengths of 532 and 266 nm. Both, P3HT and PCDTBT in the blend require lower fluence and less pulses in order to optimize LIPSS morphology than in the case of irradiating the homopolymers separately. Near edge X-ray absorption fine structure and Raman spectroscopy reveal a good chemical stability of both components in the blend thin films during LIPSS formation. In addition, scanning transmission X-ray spectro-microscopy shows that the mechanisms of LIPSS formation do not induce a further phase segregation neither a mixture of the components. Conducting atomic force microscopy reveals a heterogeneous electrical conductivity for the irradiated homopolymer and for the blend thin films, showing higher electrical conduction in the trenches than in the ridge regions of the LIPSS., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synergistic Effect of Fullerenes on the Laser-Induced Periodic Surface Structuring of Poly(3-Hexyl Thiophene)

  • Rodríguez-Rodríguez, Álvaro
  • Gutiérrez-Fernández, Edgar
  • García-Gutiérrez, Mari Cruz
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
Ordered and homogeneous laser-induced periodic surface structures (LIPSS) could be fabricated in poly(3-hexyl thiophene):[6,6]-phenyl C71-butyric acid methyl ester (P3HT:PC71BM) blends by using wavelengths in the ultraviolet (UV) range (266 nm). The absorption coefficient of PC71BM, which is maximum in its UV–Visible absorption spectrum around 266 nm, enhanced the overall absorption of the blend. In addition, PC71BM itself was capable of developing homogeneous LIPSS by laser irradiation at λlaser = 266 nm. Therefore, we proposed that the synergistic effect of PC71BM on the LIPSS formation in P3HT:PC71BM (1:1) was due to a templating effect for the LIPSS formation of the PC71BM itself, which added to the overall increment of the absorption of the blend. LIPSS formation at ambient conditions in this wavelength range led to chemical modification of both P3HT and PC71BM, which rendered to non-conducting samples. Irradiation in vacuum significantly reduced radiation damage, rendering to the characteristic electrical conductivity pattern observed in P3HT LIPSS samples irradiated in the visible range. This effect could be of potential interest in order to obtain LIPSS in low absorbing polymers., This work has been supported by the Spanish Ministry of Economy and Competitiveness under the projects MAT2014-59187-R, MAT2015-66443-C02-1-R and CTQ2016-75880-P. E.R. thanks MINECO for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069, We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional nanostructured surfaces induced by laser on fullerene thin films

  • Gutiérrez-Fernández, Edgar
  • Rodríguez-Rodríguez, Álvaro
  • García-Gutiérrez, Mari Cruz
  • Nogales, Aurora
  • Ezquerra, Tiberio A.
  • Rebollar, Esther
We report a method to produce nanosecond pulsed laser induced periodic surface structures (LIPSS) on spin-coated [6,6]‑phenyl C71-butyric acid methyl ester (PCBM) films exhibiting a photoinduced resist-free imprinting (PRI) property. LIPSS in PCBM are resist free and can be solvent developed, under certain conditions, leaving the laser illuminated zone as an undissolved residue. LIPSS prepared with a wavelength of 532 nm selectively preserve the electrical conductivity on the LIPSS valleys. The heterogeneous conducting pattern consisting in conducting valleys and less conducting hills observed in the LIPSS has been interpreted as due to a reduction in the crystallinity of the hills provoked by the fast heating/cooling process induced by every laser pulse. On the basis of the experiments we propose that irradiated PCBM films: i) suffer a fast heating/cooling process tending to reduce the overall crystallinity of the LIPSS and therefore decreasing the electrical conductivity of the hills while leaving a remnant conducting film underneath the hills, ii) during laser irradiation the sample suffers a heat treatment leading to the development of a buried phase with enhanced crystallinity, close to the silicon substrate, formed by larger crystals with enhanced electrical conductivity and iii) further solvent treatment reveals the buried phase which remains in the form of partially electrically conducting nanowires. These results point towards the potential use of the described technology for nanofabrication of organic electronic devices., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Confinement effects in one-dimensional nanoarrays of polymer semiconductors and their photovoltaic blends

  • Hernández, Jaime J.
  • Puente-Orench, Inés
  • Ezquerra, Tiberio A.
  • Gutiérrez-Fernández, Edgar
  • García-Gutiérrez, Mari Cruz
We report on the strong changes induced, by confinement, in the microstructure of the semiconductor poly(2,5-bis(3-hexadecylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT) and its photovoltaic blend with [6,6]-Phenyl-C71-butyric acid methyl ester (PC71BM). These organic compounds can be used as model systems to illustrate how sensitive this class of materials can be to spatial confinement on device-relevant length scales. The spatial confinement of nanofilaments as a function of diameter, from 180 to 25 nm, has been investigated by X-ray scattering with nanofocused synchrotron beams. The effects of spatial confinement are evident by crystallization in different crystal forms, reduction of crystallinity, phase segregation and anisotropic crystal orientation. It is also shown that confinement is an efficient tool to direct the overall texture included the crystal orientation of the homopolymer PBTTT and the PBTTT/PC71BM blend in a controlled manner., This work is funded by MINECO through projects MAT2014-59187-R and MAT2015-66443-C02 1-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Resonant soft x-ray scattering unravels the hierarchical morphology of nanostructured bulk heterojunction photovoltaic thin films

  • Rodríguez-Rodríguez, Álvaro
  • García-Gutiérrez, Mari Cruz
  • Ezquerra, Tiberio A.
  • Brady, M. A.
  • Wang, C.
  • Rebollar, Esther
Resonant soft x-ray scattering at the carbon K edge is shown to be an unambiguous approach to evaluate the phase segregation between donor and acceptor phases across the grooves of a laser-induced periodic surface nanostructure on a paradigmatic poly(3-hexylthiophene)/fullerene bulk heterojunction. By taking advantage of the use of polarized soft x rays, the results provide direct evidence that the formation of the nanostructure on the surface of the heterojunction induces not only additional phase separation of the two components but also a preferential directional arrangement of the different phases., The authors gratefully acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness (MINECO) through Projects MAT2014-59187-R, MAT2015-66443-C02 1-R and CTQ2016-75880-P. A.R.-R. and E.R. are indebted to MINECO for a FPI (BES-2013-062620) and Ramón y Cajal (RYC-2011-08069) contracts, respectively. This research used resources of the Advanced Light Source, which is a DOE Office of Science User Facility under contract no. DEAC02- 05CH11231, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantitative assessment by local probe methods of the mechanical and electrical properties of inkjet-printed PEDOT:PSS thin films over Indium Tin Oxide substrates

  • Gutiérrez-Fernández, Edgar
  • Gabaldón-Saucedo, I.A.
  • García-Gutiérrez, Mari Cruz
  • Varea, A.
  • Nogales, Aurora
  • Rebollar, Esther
  • Vilà, A.
  • Ezquerra, Tiberio A.
  • Cirera, A.
6 pags., 8 figs., Thin films of Poly(3,4-ethylenedioxythiophene)complexed with Poly(styrenesulfonate)(PEDOT:PSS)on Indium Tin Oxide (ITO)have been prepared by inkjet printing technology. The process allows obtaining thin films over large areas. A relatively broad range of thicknesses can be obtained by the addition of subsequent polymer layers resembling an additive manufacturing process. The resulting inkjet PEDOT:PSS films are homogeneous as regard both electrical and mechanical properties. In spite of the characteristic parallel line topography of these inkjet printed films, both the Quantitative Nanomechanical Mapping (QNM)and the Conductive-Atomic Force Microscope (C-AFM)characterization reveal homogeneous values throughout the polymer surface regardless of the welding zones. The results discussed in this work provide the basis for the application of inkjet printing as deposition method for electrically conducting PEDOT:PSS into a large area with mechanical stability., This work has been supported by Ministry of Science, Innovation and Universities (MCIU, Spain) under the projects MAT2014-59187-R, MAT2015-66443-C02-1-R and CTQ2016-75880-P. E.R. thanks MCIU for the tenure of a Ramón y Cajal contract (No. RYC-2011-08069). We thank Daniel Hermida for valuable technical support during measurements at BM26 at ESRF (Grenoble, France).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Glass transition and crystallization in colloidal polymer nanoparticles

  • Cangialosi, Daniele
  • Nogales, Aurora
Colloidal polymer nanoparticles have recently attracted great interest as a result of their use in a wide range of applications including drug delivery, biolabeling, advanced biological sensors, photonic crystals, etc. The large interfacial area of nanoparticles may induce profound changes in the properties of the polymers, a fact which is of utmost importance from both technological and fundamental viewpoints, DC acknowledges financial support from the project MAT2015-63704-P, (MINECO/FEDER, UE) and PGC2018-094548-B-I00 (MICINN-Spain and FEDER-UE), and the Basque Government (Grant No. IT-654-13 (GV)). AN acknowledges financial support from the Spanish Ministry of Economy (Grant No. MAT2014-59187-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Quantitative mechanical and electrical assessment by local probe methods of inkjet-printed PEDOT:PSS thin films

  • Gutiérrez-Fernández, Edgar
  • Gabaldón, I. A.
  • García-Gutiérrez, Mari Cruz
  • Varea, A.
  • Nogales, Aurora
  • Rebollar, Esther
  • Vila, A.
  • Cirera, T.
  • Ezquerra, Tiberio A.
APS March Meeting, Boston, MA, March 4-8, 2019. -- https://www.aps.org/meetings/meeting.cfm?name=MAR19, This work has been supported by Spanish MINECO under the projects MAT2014-59187-R, MAT2015-66443-C02-1-R and CTQ2016-75880-P.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Self-assembly of thermo and light responsive amphiphilic linear dendritic block copolymers

  • García-Juan, H.
  • Nogales, A.
  • Blasco, E.
  • Martínez, J.C.
  • Sics, I.
  • Ezquerra, T.A.
  • Piñol, M.
  • Oriol, L.
The synthesis and structural characterization of a new dual responsive linear-dendritic block copolymer (LDBC) is presented. The LDBC is constituted by a thermoresponsive linear block from polymethacrylate of oligo- and diethylene glycol, and a light responsive den- dron block of bis-MPA decorated at the periphery with 4-isobutyloxyazobenzene and alkyl chains in a 50:50 M ratio. Blocks are coupled together by copper(I) catalyzed alkyne–azide cycloaddition (CuAAC). The ability of the LDBC to form vesicle self-assemblies in water is described, as well as the effect of light and temperature on the vesicles morphology, on the basis of transmission electron microscopy (TEM), dynamic light scattering (DLS) and UV–vis spectroscopy studies. The effect of UV light and temperature on the vesicles struc- ture by SAXS and WAXS conducted on real time is also presented. Finally, the potential use of the vesicles to load and stimuli controlled release of small fluorescent molecules is probed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Confinement effects in one-dimensional nanoarrays of polymer semiconductors and their photovoltaic blends

  • Hernández, J.J.
  • Puente-Orench, I.
  • Ezquerra, T.A.
  • Gutiérrez-Fernández, E.
  • García-Gutiérrez, M.C.
We report on the strong changes induced, by confinement, in the microstructure of the semiconductor poly(2, 5-bis(3-hexadecylthiophen-2-yl)thieno[3, 2-b]thiophene) (PBTTT) and its photovoltaic blend with [6, 6]-Phenyl-C71-butyric acid methyl ester (PC71BM). These organic compounds can be used as model systems to illustrate how sensitive this class of materials can be to spatial confinement on device-relevant length scales. The spatial confinement of nanofilaments as a function of diameter, from 180 to 25 nm, has been investigated by X-ray scattering with nanofocused synchrotron beams. The effects of spatial confinement are evident by crystallization in different crystal forms, reduction of crystallinity, phase segregation and anisotropic crystal orientation. It is also shown that confinement is an efficient tool to direct the overall texture included the crystal orientation of the homopolymer PBTTT and the PBTTT/PC71BM blend in a controlled manner.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Light-Responsive Self-Assembled Materials by Supramolecular Post-Functionalization via Hydrogen Bonding of Amphiphilic Block Copolymers

  • Oriol Langa, Luis Teodoro
  • Piñol, Milagros
  • Nogales, A
  • Concellón, A.
  • Blasco, E.
  • Martínez-Felipe, A.
  • Martínez, J. C.
  • Šics, I.
  • Ezquerra, T. A.
A new class of light-responsive supramolecular amphiphilic block copolymers (BCs) based on the association through multiple H-bonding between 4-isobutyloxyazobenzene motifs and 2, 6-diacylaminepyridine units is reported. Block copolymers containing 2, 6-diacylaminopyridine side units, as hydrophobic block, and poly(ethylene glycol), as a hydrophilic segment, were functionalized with either a carboxylic acid azodendron, via double H-bonding, or a thymine azobenzene, via triple H-bonding. The structural and thermal characterization of these supramolecular azo-copolymers in bulk and solution is presented. The work emphasizes the self-assembly of these supramolecular polymers in water and the study of their UV-light responsive properties by UV-vis spectroscopy, dynamic light scattering (DLS), transmission electron microscopy (TEM), and synchrotron small-angle X-ray (SAXS). The present noncovalent postpolymerization functionalization strategy has provided stable self-assemblies in water with light responsive properties that can be used to load and trigger the delivery of small fluorescent molecules.