Pasar al contenido principal

DE LAS NANO-PARTICULAS BLANDAS UNIMOLECULARES A LOS NANO-COMPUESTOS TOTALMENTE POLIMERICOS

MAT2015-63704-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 77
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Relaxations and relaxor-ferroelectric-like response of nanotubularly confined poly(vinylidene fluoride)

  • Martín, Jaime
  • Iturrospe, Amaia
  • Cavallaro, Andrea
  • Arbe, Arantxa
  • Stingelin, Natalie
  • Ezquerra, Tiberio A.
  • Mijangos, Carmen
  • Nogales, Aurora
Herein, we elucidate the impact of tubular confinement on the structure and relaxation behavior of poly(vinylidene difluoride) (PVDF) and how these affect the para-/ferroelectric behavior of this polymer. We use PVDF nanotubes that were solidified in anodic aluminum oxide (AAO) templates. Dielectric spectroscopy measurements evidence a bimodal relaxation process for PVDF nanotubes: besides the bulk-like α-relaxation, we detect a notably slower relaxation that is associated with the PVDF regions of restricted dynamics at the interface with the AAO pore. Strikingly, both the bulk-like and the interfacial relaxation tend to become temperature independent as the temperature increases, a behavior that has been observed before in inorganic relaxor ferroelectrics. In line with this, we observe that the real part of the dielectric permittivity of the PVDF nanotubes exhibits a broad maximum when plotted against the temperature, which is, again, a typical feature of relaxor ferroelectrics. As such, we propose that, in nanotubular PVDF, ferroelectric-like nanodomains are formed in the amorphous phase regions adjacent to the AAO interface. These ferroelectric nanodomains may result from an anisotropic chain conformation and a preferred orientation of local dipoles due to selective H-bond formation between the PVDF macromolecues and the AAO walls. Such relaxor-ferroelectric-like behavior has not been observed for nonirradiated PVDF homopolymer; our findings thus may enable in the future alternative applications for this bulk commodity plastic, e.g., for the production of electrocaloric devices for solid-state refrigeration which benefit from a relaxor-ferroelectric-like response., J.M. acknowledges support from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant, agreement No. 654682. A.A. and A.I. acknowledge financial support from the Spanish Ministry Ministerio de Economia y Competitividad (MINECO) (code: MAT2015-63704-P (MINECO/FEDER, UE)) and the Eusko Jaurlaritza (Basque Government) (code: IT-654-13). A.C. would like to acknowledge the financial support of the EPSRC (EP/M014142/1). A.N., T.A.E., and C.M. acknowledge financial support from MINECO (codes: MAT2014-59187-R, MAT2015-66443-C02-1-R, and MAT2014-53437-C2-1P, respectively). N.S. is in addition grateful for support from a European Research Council ERC Starting Independent Research Fellowship under the grant agreement No. 279587., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Acrylic-based composite latexes containing nano-sized liquid crystalline domains

  • Mehravar, Ehsan
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Leiza, Jose R.
  • Asua, José M.
Two-scale multicomposite (meth)acrylate latexes containing nano-sized liquid crystalline domains were synthesized in a two step (mini)emulsion polymerization using a series of methacrylate side chain liquid crystalline monomers and mixture of short chain (meth)acrylates. Detailed characterization of the composite films obtained from the latexes using a combination of DSC, TEM, polarized light microscopy, SAXS and WAXS showed that the liquid crystalline polymers had a layered structure with a 2D-organization that was not perturbed by the amorphous polymer, which on the other hand was partially intercalated between layers. This leads to a two-scale composite with enhanced mechanical properties and higher number of degrees of freedom to fine tune the mechanical properties. The effect of liquid crystalline domains on barrier properties as well as on the water resistance of the films formed from these latexes was also investigated. The persistence of crystalline order of the liquid crystalline polymer phase up to very high temperatures leads to materials with a very broad temperature range of application, improving significantly the performance with respect to other routes based on incorporation of crystalline domains via copolymerization with comb-like monomers., Financial support of the Industrial Liaison Program on Polymerization in Dispersed Media (Akzo Nobel, Allnex, Arkema, BASF, Foresa, Nuplex Resin, Solvay, Stahl, Synthomer, Vinavil, Wacker) is gratefully acknowledged. A. A. and A. I. acknowledge financial support by the Spanish Ministry 'Ministerio de Economia y Competitividad', code: MAT2015-63704-P (MINECO/FEDER, UE) and by the Eusko Jaurlaritza, code: IT-654-13. J. R. L. acknowledges financial support from the Spanish Ministry ’Ministerio de Economia y Competitividad’, code: CTQ2014-59016-R (MINECO)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Active quinine-based films able to release antimicrobial compounds via melt quaternization at low temperature

  • Latorre-Sánchez, Alejandro
  • Johansson, Mats
  • Zhang, Yuning
  • Malkoch, Michael
  • Pomposo, José A.
The fabrication of antibacterial films based on renewable materials (e.g., chitosan) has attracted significant interest in fields such as food packaging, health care and medicine. However, exploiting the antibacterial properties of cinchona alkaloids to design active nanostructured films able to release quinine-based antimicrobial compounds has not been considered previously. Herein, we develop two different routes to produce active quinine-based nanostructured cross-linked films by exploiting the multiple reactive sites of quinine and, specifically, both the nitrogen atom and the vinyl group of the quinuclidine portion of the molecule, as well as their corresponding orthogonal quaternization and thiol-ene coupling reactions. The first synthetic strategy produces stiff and brittle nanostructured quinine-based films of limited utility for practical applications. Conversely, the second approach produces active, flexible and nanostructured quinine-based films (T = -14 °C, Young's modulus = 1.3 GPa), which are able to release antimicrobial compounds against E. coli that, remarkably, are noncytotoxic against mouse macrophage and human dermal fibroblast cells. These kinds of active cinchona alkaloid-based coatings are easy to prepare by means of simple, solvent-free, melt quaternization/spreading procedures at a relatively low temperature (120 °C), making this second approach one of the most facile reported procedures to date to produce active nanostructured bio-based films., Financial support by the Spanish Ministry ‘‘Ministerio de Economia y Competitividad’’, MAT2015-63704-P (MINECO/FEDER, UE) and the Basque Government, IT-654-13 is acknowledged. A. L.-S. is grateful to the University of the Basque Country for his UPV/EHU pre-doctoral grant, and to both MPC and Gipuzkoako Foru Aldundia for financial support during his stay at KTH., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances in fluorescent single-chain nanoparticles

  • De-La-Cuesta, Julen
  • González, Edurne
  • Pomposo, José A.
Fluorophore molecules can be monitored by fluorescence spectroscopy and microscopy, which are highly useful and widely used techniques in cell biology, biochemistry, and medicine (e.g., biomarker analysis, immunoassays, cancer diagnosis). Several fluorescent micro- and nanoparticle systems based on block copolymer micelles and cross-linked polymer networks, quantum dots, π-conjugated polymers, and dendrimers have been evaluated as optical imaging systems. In this review, we highlight recent advances in the construction of fluorescent single-chain nanoparticles (SCNPs), which are valuable artificial soft nano-objects with a small tunable size (as small as 3 nm). In particular, the main methods currently available to endow SCNPs with fluorescent properties are discussed in detail, showing illustrative examples., Financial support by the Spanish Ministry “Ministerio de Economia y Competitividad”, MAT2015-63704-P (MINECO/FEDER, UE), the Basque Government, IT-654-13, and the Gipuzkoako Foru Aldundia, Programa Red Gipuzkoana de Ciencia, Tecnología e Innovación 2017, is acknowledged. J.D.-L.-C. is grateful to MINECO for his predoctoral grant. E. G. received funding from the “Fellows Gipuzkoa” fellowship of the Gipuzkoako Foru Aldundia., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances in single-chain nanoparticles for catalysis applications

  • Rubio-Cervilla, Jon
  • González, Edurne
  • Pomposo, José A.
Enzymes are the most efficient catalysts known for working in an aqueous environment near room temperature. The folding of individual polymer chains to functional single-chain nanoparticles (SCNPs) offers many opportunities for the development of artificial enzyme-mimic catalysts showing both high catalytic activity and specificity. In this review, we highlight recent results obtained in the use of SCNPs as bioinspired, highly-efficient nanoreactors (3–30 nm) for the synthesis of a variety of nanomaterials (inorganic nanoparticles, quantum dots, carbon nanodots), polymers, and chemical compounds, as well as nanocontainers for CO capture and release., Financial support by the Spanish Ministry “Ministerio de Economia y Competitividad”, MAT2015-63704-P (MINECO/FEDER, UE), the Basque Government, IT-654-13, and the Gipuzkoako Foru Aldundia, Programa Red Gipuzkoana de Ciencia, Tecnología e Innovación 2017, is acknowledged. Jon Rubio-Cervilla is grateful to the Materials Physics Center-MPC for his predoctoral grant. Edurne González received funding from the “Fellows Gipuzkoa” fellowship of the Gipuzkoako Foru Aldundia., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Complex nonequilibrium dynamics of stacked polystyrene films deep in the glassy state

  • Boucher, Virginie M.
  • Cangialosi, Daniele
  • Alegría, Ángel
  • Colmenero de León, Juan
We investigate the kinetics of enthalpy recovery in stacked glassy polystyrene (PS) films with thickness from 30 to 95 nm over a wide temperature range below the glass transition temperature (T). We show that the time evolution toward equilibrium exhibits two mechanisms of recovery, in ways analogous to bulk PS. The fast mechanism, allowing partial enthalpy recovery toward equilibrium, displays Arrhenius temperature dependence with low activation energy, whereas the slow mechanism follows pronounced super-Arrhenius temperature dependence. In comparison to bulk PS, the time scales of the two mechanisms of recovery are considerably shorter and decreasing with the film thickness. Scaling of the equilibration times at various thicknesses indicates that the fast mechanism of recovery is compatible with the free volume holes diffusion model. Conversely, the slow mechanism of recovery appears to be accelerated with decreasing thickness more than predicted by the model and, therefore, its description requires additional ingredients. The implications, from both a fundamental and technological viewpoint, of the ability of thin polymer films to densify in relatively short time scales are discussed., The authors acknowledge the University of the Basque Country and Basque Country Government (Reference No. IT-654-13 (GV)), Depto. Educacion, Universidades e investigacion, and Spanish Government (Grant No. MAT2015-63704-P, (MINECO/FEDER, UE)) for their financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamics of nano-confined water in Portland cement - comparison with synthetic C-S-H gel and other silicate materials

  • Goracci, Guido
  • Monasterio, Manuel
  • Jansson, Helén
  • Cerveny, Silvina
The dynamics of water confined in cement materials is still a matter of debate in spite of the fact that water has a major influence on properties such as durability and performance. In this study, we have investigated the dynamics of water confined in Portland cement (OPC) at different curing ages (3 weeks and 4 years after preparation) and at three water-to-cement ratios (w/c, 0.3, 0.4 and 0.5). Using broadband dielectric spectroscopy, we distinguish four different dynamics due to water molecules confined in the pores of different sizes of cements. Here we show how water dynamics is modified by the evolution in the microstructure (maturity) and the w/c ratio. The fastest dynamics (processes 1 and 2, representing very local water dynamics) are independent of water content and the degree of maturity whereas the slowest dynamics (processes 3 and 4) are dependent on the microstructure developed during curing. Additionally, we analyze the differences regarding the water dynamics when confined in synthetic C-S-H gel and in the C-S-H of Portland cement., Support from the Basque Government under the ELKARTEK Program is acknowledged (Super - KK2016/00060). S.C also acknowledges the Ministerio de Economia y Competitividad”, code: MAT2015-63704-P (MINECO/FEDER, UE). H.J. acknowledges the Swedish research council FORMAS and the EU Climate KIC project Building Technologies Acceleration for financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of precursor topology and synthesis under crowding conditions on the structure of single-chain polymer nanoparticles

  • Formanek, Maud
  • Moreno Segurado, Ángel J.
By means of molecular dynamics simulations, we investigate the formation of single-chain nanoparticles through intramolecular cross-linking of polymer chains, in the presence of their precursors acting as purely steric crowders in concentrated solution. In the case of linear precursors, the structure of the resulting SCNPs is weakly affected by the density at which the synthesis is performed. Crowding has significant effects if ring precursors are used: higher concentrations lead to the formation of SCNPs with more compact and spherical morphologies. Such SCNPs retain in the swollen state (high dilution) the crumpled globular conformations adopted by the ring precursors in the crowded solutions. Increasing the concentration of both the linear and ring precursors up to 30% leads to faster formation of the respective SCNPs, prior to deceleration expected at higher densities. The results presented here propose promising new routes for the synthesis of globular SCNPs, which are usually elusive by conventional methods., We acknowledge financial support from the projects MAT2015-63704-P (MINECO-Spain and FEDER-UE) and IT-654-13 (Basque Government, Spain)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Folding single chains to single-chain nanoparticles via reversible interactions: What size reduction can one expect?

  • Pomposo, José A.
  • Rubio-Cervilla, Jon
  • Moreno Segurado, Ángel J.
  • Lo Verso, Federica
  • Bačová, Petra
  • Arbe, Arantxa
  • Colmenero de León, Juan
Single-chain nanoparticles (SCNPs) constructed via reversible bonds are versatile stimuli-responsive soft nano-objects with potential use in nanomedicine, bioimaging, biosensing, and catalysis applications. In recent years, many different types of reversible SCNPs have been reported involving intrachain hydrogen bonding, host-guest interactions, and metal complex formation, among other reversible bonds. As illustrated in this work, reversible SCNPs in solution with similar nature, molar mass, and amount of reactive groups than irreversible (covalent-bonded) SCNPs display, on average, a lower level of chain compaction. We follow herein a Flory-like argument to obtain a simple expression providing the expected size reduction upon folding single chains of size R to SCNPs of size R with reversible interactions. Accurate estimation of R is of outmost importance for developing practical applications of responsive SCNPs based on structure-property relationships. For precursor chains having a fraction of groups x involved in reversible bonds, the expected size upon intrachain folding of the precursor chains to conventional SCNPs is given by R = R(1 - x). We perform a comparison of the size reduction predicted by the former expression with extensive literature data for SCNPs constructed via reversible bonds (72 SCNPs, 22 reversible interactions). The overall agreement between theoretical and experimental data is excellent, hence allowing a valuable a priori estimation of the size reduction upon folding single chains to single-chain nanoparticles via reversible interactions., Financial support by the Spanish Ministry “Ministerio de Economia y Competitividad”, MAT2015-63704-P (MINECO/FEDER, UE) and the Basque Government, IT-654-13, is acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Glass transition and molecular dynamics in polystyrene nanospheres by fast scanning calorimetry

  • Perez-de-Eulate, Natalia G.
  • Di Lisio, Valerio
  • Cangialosi, Daniele
We employ fast scanning calorimetry (FSC) to characterize the glass transition of polystyrene (PS) nanospheres. We observe suppression of the glass transition temperature (T) in comparison to bulk PS, both in terms of limiting fictive temperature (T) and temperature range of vitrification. At the same time, the polymer molecular mobility is found to be independent of the nanospheres diameter and bulk-like. Importantly, apart from the fact that this result has been obtained on the same samples and experiments and at comparable time scales, in all cases, a perturbation of the entropy is induced. Hence, to understand these results, the conceptual difference between vitrification kinetics and molecular mobility is highlighted. The main consequence of the outcome of the present study is that arguments beyond those based on the modification of the molecular mobility must be accounted for to explain T suppression in polymer glasses subjected to nanoscale confinement., D.C. and N.G.D. acknowledges the University of the Basque Country and Basque Country Government (Ref. No. IT-654-13 (GV)), Depto. Educacion, Universidades e Investigacion; and Spanish Government (Grant No. MAT2015-63704-P, (MINECO/FEDER, UE)) for their financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Investigation of the dynamics of aqueous proline solutions using neutron scattering and molecular dynamics simulations

  • Malo de Molina, Paula
  • Álvarez González, Fernando
  • Frick, Bernhard
  • Wildes, Andrew
  • Arbe, Arantxa
  • Colmenero de León, Juan
We applied quasielastic neutron scattering (QENS) techniques to samples with two different contrasts (deuterated solute/hydrogenated solvent and the opposite label) to selectively study the component dynamics of proline/water solutions. Results on diluted and concentrated solutions (31 and 6 water molecules/proline molecule, respectively) were analyzed in terms of the susceptibility and considering a recently proposed model for water dynamics [Arbe et al., Phys. Rev. Lett., 2016, 117, 185501] which includes vibrations and the convolution of localized motions and diffusion. We found that proline molecules not only reduce the average diffusion coefficient of water but also extend the time/frequency range of the crossover region (‘cage’) between the vibrations and purely diffusive behavior. For the high proline concentration we also found experimental evidence of water heterogeneous dynamics and a distribution of diffusion coefficients. Complementary molecular dynamics simulations show that water molecules start to perform rotational diffusion when they escape the cage regime but before the purely diffusive behavior is established. The rotational diffusion regime is also retarded by the presence of proline molecules. On the other hand, a strong coupling between proline and water diffusive dynamics which persists with decreasing temperature is directly observed using QENS. Not only are the temperature dependences of the diffusion coefficients of both components the same, but their absolute values also approach each other with increasing proline concentration. We compared our results with those reported using other techniques, in particular using dielectric spectroscopy (DS). A simple approach based on molecular hydrodynamics and a molecular treatment of DS allows rationalizing the a priori puzzling inconsistency between QENS and dielectric results regarding the dynamic coupling of the two components. The interpretation proposed is based on general grounds and therefore should be applicable to other biomolecular solutions., Financial support from the Projects from the Spanish Ministry ‘‘Ministerio de Economia y Competitividad’’, code: MAT2015-63704-P (MINECO/FEDER, UE) and IT-654-13 (Basque Government), is acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ionic transport in the amorphous phase of semicrystalline polyethylene oxide thin films

  • Martínez-Tong, Daniel E.
  • Miccio, Luis A.
  • Alegría, Ángel
We present a detailed study on the ionic transport properties of polyethylene oxide (PEO) thin films prepared under different conditions. Using a state-of-the-art Atomic Force Microscopy (AFM) methodology, we simultaneously acquired the nanostructured topography of these semicrystalline polymer films as well as the corresponding dielectric function; in the latter case by probing the frequency-dependent tip-sample electrical interactions. By means of this AFM protocol, we studied the ionic conductivity in the PEO amorphous phase and its dependence on film preparation conditions. In general, for any preparation method, we found a distribution of conductivities ranging from 10 to 10 S cm. Specifically, PEO thin films crystallized from the melt presented relatively high conductivity values, which decreased in the PEO films prepared from solutions at room temperature depending on solvent polarity. We discuss our results by considering the molecular arrangement of the polymer segments in the complex amorphous phase, which is strongly influenced by the PEO crystallization route., The authors acknowledge the Basque Country Government (Reference No. IT-654-13 (GV)) and Spanish Government (Grant No. MAT2015-63704-P, (MINECO/FEDER, UE)) for their financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Irreversible adsorption erases the free surface effect on the Tg of supported films of poly(4-tert-butylstyrene)

  • Perez-de-Eulate, Natalia G.
  • Sferrazza, Michele
  • Cangialosi, Daniele
  • Napolitano, Simone
When cooled at constant rate, a 25 nm thin film of poly(4-tert-butylstyrene) vitrifies 50 K lower than in bulk. This record sets the largest depression in thermal glass transition temperature (T) ever observed upon confinement at the nanoscale level. Same as for other supported polymer layers, this reduction in T has been attributed to the presence of a free surface, the ensemble of molecules at the interface with air remaining in the liquid state also at temperatures well below bulk T. Here, we verify that such tremendous shifts can be erased upon prolonged annealing in the liquid state, hinting at a metastable nature of confinement effects. We demonstrate that the recovery of bulk behavior and the manifestation of the free surface are enslaved to the kinetics of irreversible adsorption of chains on the supporting substrate., N.G.P.-d.-E. thanks MINECO for the tenure of a FPI Grant (MAT2012-31088). D.C. acknowledges the University of the Basque Country and the Basque Country Government (Ref. No. IT-654-13 (GV)), Depto. Educacion, Universidades e ́ investigación, and the Spanish Government (Grant No. MAT2015-63704-P, (MINECO/FEDER, UE)) for their financial support. S.N. acknowledges the Fonds de la Recherche Scientifique−FNRS under Grant No. T.0037.15 “INCODYNCO”., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular dynamics of fully biobased poly(butylene 2,5-furanoate) as revealed by broadband dielectric spectroscopy

  • Soccio, Michelina
  • Martínez-Tong, Daniel E.
  • Alegría, Ángel
  • Munari, Andrea
  • Lotti, Nadia
This work presents the molecular dynamics of both fully amorphous and semicrystalline poly(butylene 2,5-furanoate) (PBF). Broadband dielectric spectroscopy experiments were combined with temperature modulated differential scanning calorimetry measurements. The results showed that the subglass molecular dynamics is characterized by the existence of two dielectric relaxation processes, being the faster one associated to the glycolic subunit, whereas the slower relaxation was assigned to the link in between the ester group and the furan ring. Crystallization affected differently the contribution of these two components. Additionally, crystallization had a stronger effect on the α relaxation process, related to the segmental dynamics of the amorphous phase. In the semicrystalline state, the PBF amorphous phase was described as being composed by different fractions, including a completely rigid one, with distinctly slower mobilities and reduced contributions to the dielectric relaxation, compared to the fully amorphous polymer., A.A. acknowledges financial support from the Projects MAT2015-63704-P (Spanish-MINECO and EU) and IT-654-13 (Basque Government)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the non-exponentiality of the dielectric Debye-like relaxation of monoalcohols

  • Arrese-Igor, Silvia
  • Alegría, Ángel
  • Colmenero de León, Juan
We have investigated the Debye-like relaxation in a series of monoalcohols (MAs) by broadband dielectric spectroscopy and thermally stimulated depolarization current techniques in order to get further insight on the time dispersion of this intriguing relaxation. Results indicate that the Debye-like relaxation of MAs is not always of exponential type and conforms well to a dispersion of Cole-Davidson type. Apart from the already reported non-exponentiality of the Debye-like relaxation in 2-hexyl-1-decanol and 2-butyl-1-octanol, a detailed analysis of the dielectric permittivity of 5-methyl-3-heptanol shows that this MA also presents some extent of dispersion on its Debye-like relaxation which strongly depends on the temperature. Results suggest that the non-exponential character of the Debye-like relaxation might be a general characteristic in the case of not so intense Debye-like relaxations relative to the α relaxation. Finally, we briefly discuss on the T-dependence and possible origin for the observed dispersion., We acknowledge the support of the following research Project Nos. MAT2015-63704-P (MINECO/FEDER, UE) supported by the Spanish Ministry “Ministerio de Economía y Competitividad” and IT-654-13 supported by the Basque Government., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Poly(butylene succinate-ran-ε-caprolactone) copolyesters: Enzymatic synthesis and crystalline isodimorphic character

  • Ciulik, Claudio
  • Safari, Maryam
  • Martínez de Ilarduya, Antxon
  • Morales-Huerta, Juan Carlos
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Müller, Alejandro J.
  • Muñoz-Guerra, Sebastián
In this paper, the preparation of PBS-ran-PCL copolyesters by enzymatic ring opening polymerization is presented for the first time. The copolyesters were produced in a wide composition range and free of metallic contaminants, so they may be regarded as potential biomaterials. The copolymers have been characterized by proton and carbon nuclear magnetic resonance (H and C NMR), gel permeation chromatography (GPC), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), polarized light optical microscopy (PLOM) and wide angle X-ray scattering (WAXS). The PBS-ran-PCL copolyesters were able to crystallize in the entire composition range and displayed a pseudo-eutectic region. Most copolymers away from the pseudo-eutectic region exhibited a single crystalline phase (PBS-rich or PCL-rich crystalline phase), while within the pseudo-eutectic region the copolymers were double crystalline. Observations by PLOM, during isothermal crystallization showed that both nucleation density and spherulitic growth rate of the copolyesters are determined by the component that constitutes the majority phase. WAXS studies revealed that d spacings of selected crystallographic planes depend on composition. Therefore, both DSC and WAXS results suggest that the copolymers are probably isodimorphic, as the PBS-rich crystalline phase may contain small inclusions of PCL co-units, while the PCL-rich crystalline domains may also contain a minor quantity of PBS co-units inside., This work received financial support from Ministerio de Economia y Competitividad (MINECO) of Spain with Grant MAT2012-38044-C03-03 and MAT2016-77345-C3-1-P and from Agència de Gestió d'Ajuts Universitaris i de Recerca (AGAUR) (Catalonia, Spain) with grant 2009SGR1469. The POLYMAT/UPV/EHU team would like to acknowledge funding from the following projects: “UPV/EHU Infrastructure: INF 14/38”; “MINECO/FEDER: SINF 130I001726XV1/Ref.: UNPV13-4E-1726” and “MINECO MAT2014-53437-C2-P”. A.A. and A.I. acknowledge financial support from the Spanish Ministry (MINECO), Ref: MAT2015-63704-P (MINECO/FEDER, UE) and by the Eusko Jaurlaritza (Basque Government), Ref: IT-654-13. C.C. wishes to acknowledge CNPq (National Research Council) Brazil for the financial support. M.S. gratefully acknowledges the award of a PhD fellowship by POLYMAT Basque Center for Macromolecular Design and Engineering. JC M-H thanks to Consejo Nacional de Ciencia y Tecnología (CONACYT) (Mexico) for the awarded PhD grant., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reaching the ideal glass transition by aging polymer films

  • Boucher, Virginie M.
  • Cangialosi, Daniele
  • Alegría, Ángel
  • Colmenero de León, Juan
Searching for the ideal glass transition, we exploit the ability of glassy polymer films to explore low energy states in remarkably short time scales. We use 30 nm thick polystyrene (PS) films, which in the supercooled state basically display the bulk polymer equilibrium thermodynamics and dynamics. We show that in the glassy state, this system exhibits two mechanisms of equilibrium recovery. The faster one, active well below the kinetic glass transition temperature (Tg), allows massive enthalpy recovery. This implies that the ‘fictive’ temperature (Tf) reaches values as low as the predicted Kauzmann temperature (TK) for PS. Once the thermodynamic state corresponding to Tf = TK is reached, no further decrease of enthalpy is observed. This is interpreted as a signature of the ideal glass transition., The authors acknowledge the University of the Basque Country and Basque Country Government (Ref. No. IT-654-13 (GV)), Depto. Educacion, Universidades e investigacion; and Spanish Government (Grant No. MAT2015-63704-P, (MINECO/FEDER, UE)) for their financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Size of elastic single-chain nanoparticles in solution and on surfaces

  • De-La-Cuesta, Julen
  • González, Edurne
  • Moreno Segurado, Ángel J.
  • Arbe, Arantxa
  • Colmenero de León, Juan
  • Pomposo, José A.
We introduce herein a simple model of covalent-bonded single-chain nanoparticles (SCNPs) by considering these intrachain cross-linked nano-objects as elastic unimolecular networks. According to this model, each SCNP is regarded as a network of elastic strands connected by cross-links. The free energy of the SCNP is decomposed in two contributions: (i) an elastic free energy due to the presence of these strands and (ii) an excluded volume contribution arising from the balance of monomer-monomer and monomer-solvent interactions. We provide scaling law expressions for the size (R), diffusion coefficient (D), apparent molar mass (M), and shrinking factor («G») of elastic SCNPs in good, theta, and bad solvents. Also, we derive scaling laws for the height (H) of elastic SCNPs deposited on both low- and high-surface free energy substrates. A comparison of experimental results to model predictions for covalent-bonded polystyrene SCNPs in solution of narrow molecular weight distribution (1.09 ≤ D ≤ 1.26), different amount of reactive groups (0.025 ≤ x ≤ 0.3), and varying precursor molar mass (44 ≤ M ≤ 235 kDa) is performed based on literature data. For the same system, a similar comparison of experimental and theoretical H data corresponding to the case of SCNPs deposited on low- and high-energy substrates is also carried out. This simple elastic model provides a useful framework for connecting the amount of reactive groups and precursor molar mass with the size upon intrachain cross-linking for a variety of covalent-bonded SCNPs both in solvents of different quality and on substrates of different surface free energy., Financial support by the Spanish Ministry “Ministerio de Economia y Competitividad”, MAT2015-63704-P (MINECO/FEDER, UE), and the Basque Government, IT-654-13, is acknowledged., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Supramolecular self-assembly of monocarboxydecyl-terminated dimethylsiloxane oligomer

  • Martínez-Rugerio, Gerardo
  • Arbe, Arantxa
  • Colmenero de León, Juan
  • Alegría, Ángel
The supramolecular self-assembly of monocarboxydecyl-terminated dimethylsiloxane oligomer is investigated and characterized by combining different experimental methods. Thermodynamic properties were accessed by temperature-modulated differential scanning calorimetry, and two subambient phase transitions were identified. Fourier transform infrared spectroscopy gave access to the main molecular entities involved in these phase transitions. Diffraction experiments using small-angle X-ray scattering and wide-angle X-ray scattering evidenced the development of two distinct well-ordered sub-10 nm structures, each associated with one of the thermal transitions, without any indication of long-range atomic order. All the results point to the self-assembly of the oligomeric dimers below 230 K, giving rise to supramolecular structures involving new H-bonding interactions. A further structure is developed below 205 K by the assembly of the alkane part of the molecules in an arrangement of hexagonally packed cylinders. Dielectric relaxation experiments evidenced both the pronounced effect of the lowest temperature transition on the H-bond network fluctuations and the very effective segregation of dimethylsiloxane at lower temperatures. Moreover, we found that the structured liquid presents a rubber-like mechanical behavior in the temperature range 150-200 K, where dimethylsiloxane phase remains amorphous, and at lower temperatures a glassy nanostructured material is found., The authors gratefully acknowledge the financial support of the Basque Government code: IT-654-13 and the Ministerio de Economia y Competitividad code: MAT2015-63704-P (MINECO/FEDER, UE)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The complex amorphous phase in poly(butylene succinate-ran-butylene azelate) isodimorphic copolyesters

  • Arandia, Idoia
  • Múgica, Agurtzane
  • Zubitur, Manuela
  • Mincheva, Rosica
  • Dubois, Philippe
  • Müller, Alejandro J.
  • Alegría, Ángel
Poly(butylene succinate-ran-butylene azelate) random copolyesters (PBS-ran PBAz) were studied using broadband dielectric spectroscopy (BDS) and differential scanning calorimetry (DSC). These copolymers are characterized by being isodimorphic and by displaying a eutectic behavior. Depending on their composition, the PBS-rich phase, the PBAz-rich phase, or both phases can crystallize. The complex development of the amorphous phase, especially at compositions around the eutectic point was demonstrated by BDS results. The comonomer fraction included in the amorphous phase was quantified from the relaxation strength of the dielectric β relaxations, and thus the crystalline fraction can be calculated. The good agreement between the values determined from BDS and the crystallinity obtained from DSC experiments demonstrates that the degree of comonomer exclusion in these random copolymers during crystallization is far larger than comonomer inclusion. However, the glass transition temperatures determined from the dielectric α relaxation behavior are lower in most of the copolymers than those measured by DSC, whereas they are about the same in the homopolymers. This result is probably caused by a significant amount of amorphous phase in the copolymers that is not influenced by crystallinity. Furthermore, the crystallization behavior of these copolymers at different cooling protocols showed that the α relaxation depends not only on the crystalline fraction but also on the details of the crystallization process in these complex multiphasic copolymers., I.A. acknowledges the fellowship from the University of the Basque Country UPV/EHU. Financial support is acknowledged from UPV/EHU (UFI11/56), “UPV/EHU Infrastructure: INF 14/38”; “Mineco/FEDER: SINF 130I001726XV1/Ref: UNPV13-4E-1726” and “Mineco MAT2014-53437-C2-P”. R.M. gratefully acknowledges financial support from the Wallonia and European Commission in the frame of the BIOMAT/FEDER project and the Interuniversity Attraction Pole program of the Belgian Federal Science Policy Office (PAI 7/05). A.A. acknowledges financial support from the Projects MAT2015-63704-P (Spanish-MINECO and EU) and IT-654-13 (Basque Government)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of the topological constraints in the chain dynamics in all-polymer nanocomposites

  • Bačová, Petra
  • Lo Verso, Federica
  • Arbe, Arantxa
  • Colmenero de León, Juan
  • Pomposo, José A.
  • Moreno Segurado, Ángel J.
We investigate all-polymer nanocomposites, formed by linear chains and single-chain polymer nanoparticles (SCNPs), by means of large-scale simulations. To distinguish the role of the soft penetrable character of the SCNPs in the topological constraints from other specific contributions present in experiments, the simulations for different compositions of the mixture are performed at constant density and with identical segmental mobility and monomer excluded volume for the SCNPs and linear chains. Every composition leads to a well-dispersed nanocomposite with fully penetrated nanofillers. Hence, unlike in the case of hard nanofillers, the SCNPs do not exert confinement effects on the linear chains and only contribute to the topological constraints. We discuss the intramolecular dynamics of the linear chains in terms of the tube model. We determine the entanglement length of the linear chains by analyzing their isoconfigurational mean paths (IMP) and the primitive paths (PP) as a function of the concentration and topology of the SCNPs. In the analysis we use different estimators proposed in the literature. The IMP and PP analysis in the nanocomposites with sparse SCNPs yields values of the entanglement length smaller and larger, respectively, than in the reference pure linear melt, though small variations are observed. A more consistent trend is found in the nanocomposites with globular SCNPs, where both the IMP and PP analysis unambiguously reveal that the linear chains are more entangled than in the pure linear melt. Such differences between the effects of SCNPs with different topologies are presumably related to the much higher fraction of threadable loops in the globular SCNPs, with respect to their sparse counterparts, which effectively lead to more topological constraints., We acknowledge financial support from the projects MAT2015-63704-P (MINECO-Spain and FEDER-UE) and IT-654-13 (Basque Government, Spain)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Water diffusion and hydrolysis effect on the structure and dynamics of epoxy-anhydride networks

  • Capiel, Guillermina
  • Miccio, Luis A.
  • Montemartini, Pablo E.
  • Schwartz, Gustavo A.
Epoxy-anhydride networks have been analyzed in terms of water uptake and degradation behavior by means of broadband dielectric spectroscopy and atomic force microscopy. It has been found that water absorption produces a chemical reaction in the polymer networks, in turn causing a plasticizing effect and changing their mechanical properties. We demonstrate that a non invasive dielectric spectroscopy analysis of the segmental dynamics can be performed in order to quantitatively describe the degradation effects, as well as their influence in the mechanical properties at the nanoscale., This work was partially Supported by the Spanish Ministry “Ministerio de Economía y Competitividad”, code: MAT2015-63704-P (MINECO/FEDER, UE) and by the Argentine government funded scholarship program, BEC.AR., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An insight into the anionic ring-opening polymerization with tetrabutylammonium azide for the generation of pure cyclic poly(glycidyl phenyl ether)

  • Ochs, Jordan
  • Veloso, Antonio
  • Martínez-Tong, Daniel E.
  • Alegría, Ángel
  • Barroso-Bujans, Fabienne
We evaluate the use of tetrabutylammonium azide (NNBu) as an anionic ring-opening polymerization initiator for synthesizing azide-terminated linear poly(glycidyl phenyl ether) and then generating monocyclic structures with high purity. In particular, we perform a detailed study on the end-group fidelity of polymers obtained by initiation with NNBu in the presence and absence of trisisobutylaluminum (iBuAl) and evaluate the purity of the cyclic structures obtained via copper-catalyzed alkyne-azide cycloaddition >click> reaction. We demonstrate that in contrast to the polymerization initiated by NNBu alone, the polymerization performed in the presence of iBuAl allows the formation of polymers with high end-group fidelity (azide groups at the α-position) for M < 20 kDa. The cyclic purity is evaluated by SEC with triple detection and dielectric spectroscopy. The latter technique, although not conventional for such a purpose, is shown to be very convenient to ensure cyclic purity in polymers showing an end-to-end dielectric relaxation mode., We gratefully acknowledge support from MINECO (MAT2015-63704-P) and Basque Government (IT-654-13)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Applying polymer blend dynamics concepts to a simplified industrial system. A combined effort by dielectric spectroscopy and neutron scattering

  • Gambino, Thomas
  • Alegría, Ángel
  • Arbe, Arantxa
  • Colmenero de León, Juan
  • Malicki, Nicolas
  • Dronet, Séverin
  • Schnell, Benoît
  • Lohstroh, Wiebke
  • Nemkovski, Kirill
We apply the methodology and concepts developed over the past years for the study of segmental dynamics on miscible polymer blends to the investigation of a blend made of styrene-butadiene rubber (SBR) and an oligomer of polystyrene (PS) as an example of a simplified industrial system. In this way we obtain detailed information about the segmental dynamics of both components within the blend. To this end, a judicious combination of broad-band dielectric spectroscopy (BDS) and quasi-elastic neutron scattering (QENS) results on deuterium-labeled blends was required. Difficulties on the comparison between isotopically different samples arose due to changes in polymer microstructure associated with the obtention of deuterated polymers. Nevertheless, the strategy for data analysis developed in this work made it possible to readily resolve the components' segmental dynamics of the investigated mixtures. It was found that Gaussian distributions of the components' effective glass-transition temperatures provide a very good description of all the experimental data collected in the SBR/PS (50/50 wt %) mixtures over the whole accessible temperature range, not only by BDS and QENS but also those obtained by differential scanning calorimetry and by neutron elastic fixed window scan experiments., The authors gratefully acknowledge the financial support of the Basque Government code: IT-654-13 and the Ministerio de Economía y Competitividad code: MAT2015-63704-P (MINECO/FEDER, UE). This work is based on experiments performed at DNS(41,42) operated at Jülich Centre for Neutron Science (JCNS), TOFTOF,(43) operated by the Technische Universität München, and SPHERES (Heinz Maier-Leibnitz Zentrum (MLZ), Garching, Germany) and has been supported by the European Commission under the seventh Framework Programme through the “Research Infrastructures” action of the “Capacities” Programme, NMI3-II Grant 283883., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Computational investigation of microgels: synthesis and effect of the microstructure on the deswelling behavior

  • Moreno Segurado, Ángel J.
  • Lo Verso, Federica
We present computer simulations of a realistic model of microgels. Unlike the regular network frameworks usually assumed in the simulation literature, we model and simulate a realistic and efficient synthesis route, mimicking cross-linking of functionalized chains inside a cavity. This model is inspired, e.g., by microfluidic fabrication of microgels from macromolecular precursors and is different from standard polymerization routes. The assembly of the chains is mediated by a low fraction of interchain crosslinks. The microgels are polydisperse in size and shape but globally spherical objects. In order to deeply understand the microgel structure and eventually improve the synthesis protocol we characterize their conformational properties and deswelling kinetics, and compare them with the results found for microgels obtained via underlying regular (diamond-like) structures. For the same molecular weight, monomer concentration and effective degree of cross-linking, the specific microstructure of the microgel has no significant effect on the locus of the volume phase transition (VPT). However, it strongly affects the deswelling kinetics, as revealed by a consistent analysis of the domain growth during the microgel collapse. Though both the disordered and the regular networks exhibit a similar early growth of the domains, an acceleration is observed in the regular network at the late stage of the collapse. Similar trends are found for the dynamic correlations coupled to the domain growth. As a consequence, the fast late processes for the domain growth and the dynamic correlations in the regular network are compensated, and the dynamic correlations follow a power-law dependence on the growing length scale that is independent of the microgel microstructure., We acknowledge financial support from the projects MAT2015-63704-P (MINECO-Spain and FEDER-UE) and IT-654-13 (Basque Government, Spain)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crowding the environment of single-chain nanoparticles: A combined study by SANS and simulations

  • González-Burgos, Marina
  • Arbe, Arantxa
  • Moreno Segurado, Ángel J.
  • Pomposo, José A.
  • Radulescu, Aurel
  • Colmenero de León, Juan
We present an investigation by combining small-angle neutron scattering (SANS) and coarse-grained molecular dynamics (MD) simulations on the conformational properties of single-chain nanoparticles (SCNPs) in crowded macromolecular solutions. By using linear chains as crowders, SANS shows a crossover from almost unperturbed SCNP conformations in dilute conditions toward a continuous collapse of the macromolecule with increasing crowding. This collapse starts when the total concentration of the solution reaches the value of the overlap concentration of the pure SCNP solutions. MD simulations suggest the generalizability of these experimental findings and extend them to the case when the SCNPs themselves are used as crowders - a situation which in real systems leads to unavoidable formation of aggregates, as shown here by SANS and DLS. Exploiting the simulations, we have calculated the contact probability and the distance between monomers as functions of the contour distance between them; the results suggest that crumpled globular conformations are generally adopted by SCNPs in crowded macromolecular solutions. In the case of linear crowders, the SCNPs show, at fixed monomer concentration, a nonmonotonic dependence of their collapse on the length of the crowders., We acknowledge financial support by the Spanish Ministry “Ministerio de Economia y Competitividad”, code: MAT2015-63704-P (MINECO/FEDER, UE) and by the Basque Government IT-654-13 (GV). This work is based on experiments performed at JCNS-instrument KWS-2 (Heinz Maier-Leibnitz Zentrum (MLZ), Garching, Germany) and has been supported by the European Commission under the seventh Framework Programme through the “Research Infrastructures” action of the “Capacities” Programme, NMI3-II Grant No. 283883., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct calorimetric observation of the rigid amorphous fraction in a semiconducting polymer

  • Martín, Jaime
  • Stingelin, Natalie
  • Cangialosi, Daniele
The performance of polymeric semiconductors is profoundly affected by the thermodynamic state of its crystalline and amorphous fractions and how they affect the optoelectronic properties. While intense research has been conducted on the crystalline features, fundamental understanding of the amorphous fraction(s) is still lacking. Here, we employ fast scanning calorimetry to provide insights on the glass transition of the archetypal conjugated polymer poly(3-hexylthiophene) (P3HT). According to the conceptual definition of the glass transition temperature (T), that is, the temperature marking the crossover from the melt in metastable equilibrium to the nonequilibrium glass, an enthalpy relaxation should be observed by calorimetry when the glass is aged below T. Thus, we are able to identify the enthalpy relaxations of mobile and rigid amorphous fractions (MAF and RAF, respectively) of P3HT and to determine their respective T. Our work moreover highlights that the RAF should be included in structural models when establishing structure/property interrelationships of polymer semiconductors., J.M. acknowledges support from the Diputacion de Guipuzcoa under the programme Fellow Gipuzkoa. Likewise, J.M. thanks MEC for the Ramon y Cajal contract and the Ikerbasque Foundation for the Ikerbasque Research Fellow program. Financial support from Fundacion Iberdrola (Ayudas a la Investigacion en Energia y Medio Ambiente 2017) is also acknowledged. D.C. acknowledges the University of the Basque Country and Basque Country Government (Ref. No. IT-654-13 (GV)), Depto. Educacion, Universidades e investigacion; and Spanish Government (Grant No. MAT2015-63704-P, (MINECO/FEDER, UE)) for their financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Double mechanism for structural recovery of polystyrene nanospheres

  • Perez-de-Eulate, Natalia G.
  • Cangialosi, Daniele
Geometrical confinement can profoundly affect the dynamics of glass-forming polymers. In this context intense research has been mostly devoted to the understanding of how polymers subjected to 1-D confinement, that is, thin films, vitrify when cooled from the supercooled melt or recover equilibrium while in the glassy state. With the aim of extending our knowledge to other kinds of confinement, here we consider polystyrene (PS) nanospheres, that is, systems subjected to 3-D confinement. We investigate the physical aging following the enthalpy recovery in the glassy state employing fast scanning calorimetry, allowing heating/cooling rates as large as ∼1000 K/s. These systems have been previously shown to exhibit suppressed glass transition temperature in comparison to bulk PS. We find accelerated recovery toward equilibrium, in line with previous findings on other confined polymer glasses exhibiting weak interactions with the substrate. Furthermore, the time evolution of the enthalpy exhibits two mechanisms of equilibration. Apart from a slow one, normally observed in proximity of the glass transition, a fast, mildly activated mechanism of equilibration is observed. We emphasize the analogy with bulk glasses, also exhibiting this behavior though on considerably larger time scales., The authors thank the University of the Basque Country and Basque Country Government (ref. No. IT-654-13 (GV)), Depto. Educacion, Universidades e investigacion, and Spanish Government (Grant No. MAT2015-63704-P, (MINECO/ FEDER, UE)) for their financial support., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of chain stiffness on the structure of single-chain polymer nanoparticles

  • Moreno Segurado, Ángel J.
  • Bačová, Petra
  • Lo Verso, Federica
  • Arbe, Arantxa
  • Colmenero de León, Juan
  • Pomposo, José A.
Polymeric single-chain nanoparticles (SCNPs) are soft nano-objects synthesized by purely intramolecular cross-linking of single polymer chains. By means of computer simulations, we investigate the conformational properties of SCNPs as a function of the bending stiffness of their linear polymer precursors. We investigate a broad range of characteristic ratios from the fully flexible case to those typical of bulky synthetic polymers. Increasing stiffness hinders bonding of groups separated by short contour distances and increases looping over longer distances, leading to more compact nanoparticles with a structure of highly interconnected loops. This feature is reflected in a crossover in the scaling behaviour of several structural observables. The scaling exponents change from those characteristic for Gaussian chains or rings in θ-solvents in the fully flexible limit, to values resembling fractal or 'crumpled' globular behaviour for very stiff SCNPs. We characterize domains in the SCNPs. These are weakly deformable regions that can be seen as disordered analogues of domains in disordered proteins. Increasing stiffness leads to bigger and less deformable domains. Surprisingly, the scaling behaviour of the domains is in all cases similar to that of Gaussian chains or rings, irrespective of the stiffness and degree of cross-linking. It is the spatial arrangement of the domains which determines the global structure of the SCNP (sparse Gaussian-like object or crumpled globule). Since intramolecular stiffness can be varied through the specific chemistry of the precursor or by introducing bulky side groups in its backbone, our results propose a new strategy to tune the global structure of SCNPs., We acknowledge financial support from the projects MAT2015-63704-P (MINECO-Spain and FEDER-UE) and IT-654-13 (Basque Government, Spain)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzyme-mimetic synthesis of PEDOT from self-folded iron-containing single-chain nanoparticles

  • De-La-Cuesta, Julen
  • Asenjo-Sanz, Isabel
  • Latorre-Sánchez, Alejandro
  • González, Edurne
  • Martínez-Tong, Daniel E.
  • Pomposo, José A.
Intrinsically conducting polymers (ICPs) such as poly(3,4-ethylenedioxythiophene) (PEDOT) have attracted significant interest for the development of flexible light-emitting diodes, electrochromic devices and solar cells, as well as for a variety of biosensing and regenerative medicine applications. Herein, we disclose the use of water-soluble self-folded metal-containing single-chain nanoparticles (SCNPs) as robust enzyme-mimic nanoreactors for the synthesis of ICPs via step-growth polymerization. As a proof of concept, we report the first enzyme-mimetic synthesis of PEDOT at room temperature (r.t.) via oxidative polymerization using self-folded iron-containing SCNPs as efficient artificial pseudo-enzymes. Remarkably, this work paves the way to the synthesis of other types of ICPs (e.g., polyaniline, polypyrrole) using water-soluble metal-containing SCNPs as robust enzyme-mimic nanoreactors operating at r.t., and expands the use of SCNPs as bioinspired catalysts from chain-growth polymerization (i.e., ring-opening polymerization and living radical polymerization) to step-growth polymerization (i.e., polycondensation via oxidative polymerization)., Financial support by the Spanish Ministry “Ministerio de Economia y Competitividad”, MAT2015-63704-P(MINECO/FEDER, UE), the Basque Government, IT-654-13, and the Gipuzkoako Foru Aldundia, Programa Red Gipuzkoana de Ciencia, Tecnología e Innovación 2017 (RED 101/17), is acknowledged. J.D.-L.-C. is grateful to MINECO for his predoctoral grant. E. G. received funding from the “Fellows Gipuzkoa” fellowship of the Gipuzkoako Foru Aldundia., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Excellent stability in water of single-chain nanoparticles against chain scission by sonication

  • González-Burgos, Marina
  • González, Edurne
  • Pomposo, José A.
In this study the superior stability against degradation induced by ultrasound irradiation of water‐soluble single‐chain polymer nanoparticles when compared to their parent precursor polymers is reported, and a loop scission mechanism in support of such behavior is suggested., Financial support by the Spanish Ministry “Ministerio de Economia y Competitividad”, MAT2015‐63704‐P (MINECO/FEDER, UE), the Basque Government, IT‐654‐13, and the Gipuzkoako Foru Aldundia, RED 101/17, is acknowledged. M.G.‐B. is grateful to the University of the Basque Country for her UPV/EHU predoctoral grant. E.G. received funding from the “Fellows Gipuzkoa” fellowship of the Gipuzkoako Foru Aldundia., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Extended Adam–Gibbs approach to describe the segmental dynamics of cross-linked miscible rubber blends

  • Schwartz, Gustavo A.
  • Ortega, Lucía
  • Meyer, Mathias
  • Isitman, Nihat Ali
  • Sill, Clemens
  • Westermann, Stephan
  • Cerveny, Silvina
We present an extension to the Adam–Gibbs (AG) model to describe the segmental dynamics of miscible polymer blends with strong interactions. We studied the segmental dynamics of cross-linked styrene–butadiene rubber (SBR)/butadiene rubber (BR) blends of different microstructure, chain-end functionalization, and composition both unfilled and filled with precipitated silica by means of broadband dielectric spectroscopy (BDS). Contrary to what is observed for athermal miscible blends, the dynamics shows only a single segmental relaxation process due to the strong intermolecular interaction given by the cross-links. The temperature dependence of the relaxation times has been described and analyzed within the framework of a modified AG approach that takes into account the strong interactions between blend components due to the presence of the cross-links. The accuracy of the proposed model facilitates a deepened understanding of the dynamics of polymer blend systems based on the dynamics of its neat components., This work was partially Supported by the Spanish Ministry “Ministerio de Economia y Competitividad”, code: MAT2015-63704-P (MINECO/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of chain topology (cyclic versus linear) on the nucleation and isothermal crystallization of poly(l-lactide) and poly(d-lactide)

  • Zaldua, Nerea
  • Liénard, Romain
  • Josse, Thomas
  • Zubitur, Manuela
  • Múgica, Agurtzane
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • De Winter, Julien
  • Coulembier, Olivier
  • Müller, Alejandro J.
Ring closure click chemistry methods have been used to produce cyclic c-PLLA and c-PDLA of a number-average molecular weight close to 10 kg/mol. The effects of stereochemistry of the polymer chains and their topology on their structure, nucleation, and crystallization were studied in detail employing wide-angle X-ray scattering (WAXS), small-angle X-ray scattering (SAXS), polarized light optical microscopy (PLOM), and standard and advanced differential scanning calorimetry (DSC). The crystal structures of linear and cyclic PLAs are identical to each other, and no differences in superstructural morphology could be detected. Cyclic PLA chains are able to nucleate much faster and to produce a higher number of nuclei in comparison to linear analogues, either upon cooling from the melt or upon heating from the glassy state. In the samples prepared in this work, a small fraction of linear or higher molecular weight cycles were detected (according to SEC analyses). The presence of such “impurities” retards spherulitic growth rates of c-PLAs, making them nearly the same as those of l-PLAs. On the other hand, the overall crystallization rate determined by DSC was much larger for c-PLAs, as a consequence of the enhanced nucleation that occurs in cyclic chains. The equilibrium melting temperatures of cyclic chains were determined and found to be 5 °C higher in comparison with values for l-PLAs. This result is a consequence of the lower entropy of cyclic chains in the melt. Self-nucleation studies demonstrated that c-PLAs have a shorter crystalline memory than linear analogues, as a result of their lower entanglement density. Successive self-nucleation and annealing (SSA) experiments reveal the remarkable ability of cyclic molecules to thicken, even to the point of crystallization with extended collapsed ring conformations. In general terms, stereochemistry had less influence on the results obtained in comparison with the dominating effect of chain topology., The UPV/EHU team acknowledges funding from the following projects: “UPV/EHU Infrastructure: INF 14/38”; “Mineco/FEDER: SINF 130I001726XV1/Ref: UNPV13-4E-1726” and “Mineco MAT2014-53437−C2-P”, ’Ministerio de Economia y Competitividad (MINECO), code: MAT2015-63704-P (MINECO/FEDER, UE) and by the Eusko Jaurlaritza (Basque Government), code: IT-654-13. O.C. acknowledges financial support from the European Commission and Region Wallonne FEDER program (Materia Nova) and OPTI2 MAT program of excellence, by the Interuniversity Attraction Pole Program (P7/ 05) initiated by the Belgian Science Policy office and by the FNRS-FRFC. O.C. is a Research Associate of the F.R.S.-FNRS. The Organic Synthesis and Mass Spectrometry Laboratory thanks F.R.S.-FNRS for the financial support for the acquisition of the Waters QToF Premier and Synapt-G2Si mass spectrometers and for continuing support. Finally, all authors acknowledge Research and Innovation Staff Exchange (RISE) H2020-MSCA-RISE-2017-778092, project BIODEST, for promoting cooperation between the Mons team and the UPV/EHU team., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights into the network structure of cross-linked polymers synthesized via miniemulsion nitroxide-mediated radical polymerization

  • Mehravar, Ehsan
  • Agirre, Amaia
  • Ballard, Nicholas
  • Es, Steven van
  • Arbe, Arantxa
  • Leiza, Jose R.
  • Asua, José M.
The effect of reversible-deactivation radical polymerization on the structure of the network formed by copolymerization of mono- and divinyl monomers is studied. The nitroxide-mediated radical copolymerization (NMP) of butyl methacrylate and ethylene glycol dimethacrylate, initiated with the alkoxyamine 3-(((2-cyanopropan-2-yl)oxy)cyclohexylamino)-2,2-dimethyl-3-phenylpropanenitrile (Dispolreg 007) in an aqueous miniemulsion was used as a case study. Combination of asymmetric-flow field-flow fractionation and small-angle X-ray scattering clearly showed that NMP led to a more homogeneous network structure formed by regions of relatively open networks connected with short polymer chain segments, whereas that of the polymer formed by free radical polymerization consists of densely cross-linked regions linked by long polymer chain portions., Diputacion Foral de Gipuzkoa, University of Basque Country UPV/EHU (UFI 11/56), Basque Government (Grants GVIT373-10 and GVIT654-13), and MINECO (Grants CTQ2016-80886-R, CTQ2017-87841-R, and MAT2015-63704-P) are gratefully acknowledged for their financial support. N.B. acknowledges the financial support obtained through the postdoctoral fellowship Juan de la Cierva - Incorporacion (Grant IJCI-2016-28442) from the Ministry of Economy and Competitiveness of Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Local domain size in single-chain polymer nanoparticles

  • Pomposo, José A.
  • Moreno Segurado, Ángel J.
  • Arbe, Arantxa
  • Colmenero de León, Juan
Single-chain polymer nanoparticles (SCNPs) obtained through chain collapse via intramolecular cross-linking are attracting significant interest for nanomedicine and biomimetic catalysis applications, among other fields. This interest arises from the possibility to bind active species (e.g., drugs and catalysts)—either temporally or permanently—to the SCNP local pockets formed upon chain collapse. However, direct quantification of the size and number of such local domains in solution—even if highly desirable—is currently highly demanding from an experimental point of view because of the small size involved (<5 nm). On the basis of a scaling analysis, we establish herein a connection between the global compaction degree (R/R0) and the size (ξ) and number (n) of the “collapsed domains” generated upon SCNP formation at high dilution from a linear semiflexible precursor polymer. Results from molecular dynamics simulations and experimental data are used to validate this scaling analysis and to estimate the size and number of local domains in polystyrene SCNPs synthesized through a “click” chemistry procedure, as a representative system, as well as for relevant catalytic SCNPs containing Cu, Pt, and Ni atoms. Remarkably, the present work is a first step toward tuning the local domain size of the next generation of SCNPs for nanomedicine and bioinspired catalysis applications., The financial support by the Spanish Ministry “Ministerio de Economia y Competitividad”, MAT2015-63704-P (MINECO/FEDER, UE), the Basque Government, IT-654-13, and the Gipuzkoako Foru Aldundia, RED 101/17, is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mapping the extra solvent power of ionic liquids for monomers, polymers, and dry/wet globular single-chain polymer nanoparticles

  • González-Burgos, Marina
  • Pomposo, José A.
Ionic liquids (ILs) have shown advantages in organic synthesis and catalysis, energy storage and conversion, and a variety of pharmaceutical applications. Understanding the miscibility behavior of IL/monomer, IL/polymer, and IL/polymer nanoparticle mixtures is critical for the use of ILs as green solvents in polymerization processes as well as to rationalize recent observations concerning the superior solubility of some proteins in ILs when compared to standard solvents. In this work, the most relevant results obtained in terms of extended three-component Flory–Huggins theory concerning the extra solvent power (ESP) of ILs when compared to traditional nonionic solvents for monomeric solutes (Case I), linear polymers (Case II), dry (i.e., without IL inside) globular single-chain polymer nanoparticles (SCNPs) (Case III), and wet (i.e., with IL inside) globular SCNPs (Case IV) are presented. Moreover, useful ESP maps are drawn for the first time for IL mixtures corresponding to Cases I, II, III, and IV at a constant temperature and pressure. Finally, a potential pathway to improve the miscibility of nonionic polymers in ILs is proposed., Financial support by the Spanish Ministry “Ministerio de Economia y Competitividad”, MAT2015-63704-P (MINECO/FEDER, UE), the Basque Government, IT-654-13, and the Gipuzkoako Foru Aldundia, RED 101/17, is acknowledged. M.G.-B. is grateful to the University of the Basque Country for her UPV/EHU predoctoral grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Membrane-containing virus particles exhibit the mechanics of a composite material for genome protection

  • Azinas, S.
  • Bano, F.
  • Torca, I.
  • Bamford, Dennis H.
  • Schwartz, Gustavo A.
  • Esnaola, J.
  • Oksanen, H. M.
  • Richter, R. P.
  • Abrescia, N. G.
The protection of the viral genome during extracellular transport is an absolute requirement for virus survival and replication. In addition to the almost universal proteinaceous capsids, certain viruses add a membrane layer that encloses their double-stranded (ds) DNA genome within the protein shell. Using the membrane-containing enterobacterial virus PRD1 as a prototype, and a combination of nanoindentation assays by atomic force microscopy and finite element modelling, we show that PRD1 provides a greater stability against mechanical stress than that achieved by the majority of dsDNA icosahedral viruses that lack a membrane. We propose that the combination of a stiff and brittle proteinaceous shell coupled with a soft and compliant membrane vesicle yields a tough composite nanomaterial well-suited to protect the viral DNA during extracellular transport., We thank MINECO for the Severo Ochoa Excellence Accreditation to the CIC bioGUNE (SEV-2016-0644) and the University of Helsinki and Academy of Finland (grant 1306833) for the support to Biomolecular Complex Purification (Biocomplex), part of Instruct-FI, used in this study. This research was supported by Bruker – Spain (to S. A. and N. G. A. A.), by the Academy of Finland (Academy Professor funding grants 283072 and 255342 to D. H. B.), by the European Research Council (starting grant FP7-ERC-2012-StG-306435 to R. P. R.), and by the Spanish Ministry of Economy and Competitiveness (MINECO/FEDER; MAT2014-54867-R to R. P. R.; MAT2015-63704-P to G. A. S.; BFU2015-64541-R to N. G. A. A.)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multimodal character of shear viscosity response in hydrogen bonded liquids

  • Arrese-Igor, Silvia
  • Alegría, Ángel
  • Colmenero de León, Juan
The impact of supramolecular aggregate formation on the shear viscosity response of hydrogen bonded liquids was investigated. In particular, we study the shear mechanical response of several monoalcohols showing exponential and non-exponential shape dielectric Debye-like relaxation. In addition to the structural relaxation, distinctive of the glass transition, and the terminal crossover to pure viscous flow, characteristic of simple liquid flow, systematic analysis of complex viscosity curves evidences the presence of an additional intermediate process between those two. While the recovery of pure viscous flow would reflect the complete relaxation of the hydrogen bonded aggregates the intermediate process correlates with the rotational dynamics of hydroxyl groups, potentially caused by the breaking of individual hydrogen bonds., We acknowledge the support of the following research projects MAT2015-63704-P (MINECO/FEDER, UE) supported by the Spanish Ministry “Ministerio de Economía y Competitividad” and IT-654-13 Supported by the Basque Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photoactivation of aggregation-induced emission molecules for fast and efficient synthesis of highly fluorescent single-chain nanoparticles

  • De-La-Cuesta, Julen
  • Pomposo, José A.
Single-chain nanoparticles (SCNPs) are ultrasmall soft nanomaterials constructed via intrachain cross-linking of individual precursor polymer chains, with promising prospects for nanomedicine, catalysis, and sensing, among other different fields. SCNPs are versatile building blocks for the construction of new fluorescent probes with ultrasmall size, higher brightness, and better photostability than previous particle-based systems. Herein, we report on a new, fast, and efficient method to produce SCNPs with intense fluorescence emission in solution which is based on the photoactivation of appropriate aggregation-induced emission (AIE) cross-linking molecules containing azide functional groups. Remarkably, the presence of the azide moiety—that can be transformed to highly reactive nitrene species upon UV irradiation—was found to be essential for the SCNPs to display intense fluorescence emission. We attribute the fluorescence properties of the SCNPs to the immobilization of the initially nonfluorescent AIE molecules via intrachain cross-linking upon photoactivation. Such cross-linking-induced immobilization process activates the AIE mechanism and, hence, leads to fluorescent SCNPs in both solution and solid state., Financial support by the Spanish Ministry “Ministerio de Economia y Competitividad”, MAT2015-63704-P (MINECO/FEDER, UE), the Basque Government, IT-654-13, and the Gipuzkoako Foru Aldundia, Programa Red Gipuzkoana de Ciencia, Tecnología e Innovación 2017 (RED 101/17), is acknowledged. J.D.L.C. is grateful to MINECO for his predoctoral grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The C terminus of the ribosomal-associated protein LrtA is an intrinsically disordered oligomer

  • Neira, José L.
  • Giudici, A. Marcela
  • Hornos, Felipe
  • Arbe, Arantxa
  • Rizzuti, Bruno
This article belongs to the Special Issue Functionally Relevant Macromolecular Interactions of Disordered Proteins., The 191-residue-long LrtA protein of Synechocystis sp. PCC 6803 is involved in post-stress survival and in stabilizing 70S ribosomal particles. It belongs to the hibernating promoting factor (HPF) family, intervening in protein synthesis. The protein consists of two domains: The N-terminal region (N-LrtA, residues 1⁻101), which is common to all the members of the HPF, and seems to be well-folded; and the C-terminal region (C-LrtA, residues 102⁻191), which is hypothesized to be disordered. In this work, we studied the conformational preferences of isolated C-LrtA in solution. The protein was disordered, as shown by computational modelling, 1D-¹H NMR, steady-state far-UV circular dichroism (CD) and chemical and thermal denaturations followed by fluorescence and far-UV CD. Moreover, at physiological conditions, as indicated by several biochemical and hydrodynamic techniques, isolated C-LrtA intervened in a self-association equilibrium, involving several oligomerization reactions. Thus, C-LrtA was an oligomeric disordered protein., This research was funded by Spanish Ministry of Economy and Competitiveness [CTQ2015-64445-R (to J.L.N.) and MAT2015-63704-P (to A.A.), with Fondo Social Europeo (ESF)], and by the Basque Government [IT-654-13 (to A.A.)]., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermodynamic ultrastability of a polymer glass confined at the micrometer length scale

  • Monnier, Xavier
  • Cangialosi, Daniele
We employ fast scanning calorimetry to assess the thermodynamic state attained after a given cooling rate and the molecular mobility of glassy poly(4-tert-butylstyrene) confined at the micrometer length scale. We show that, for such a large confinement length scale, thermodynamic states with a fictive temperature (Tf) 80 K below the polymer glass transition temperature (Tg) are attained, which allows to bypass the geological timescales required for bulk glasses. Access to such states is promoted by a fast mechanism of equilibration. Importantly, the tremendous Tf decrease takes place while the molecular mobility remains bulklike, indicating marked decoupling between vitrification kinetics and molecular mobility., The authors thank the University of the Basque Country and the Basque Country government [Grant No. IT-654-13 (GV)], Departamento de Educación, Universidades e investigación, and the Spanish government [Grant No. MAT2015-63704-P, (MINECO/FEDER, UE)] for their financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of the functionality in the branch point motion in symmetric star polymers: A combined study by simulations and neutron spin echo spectroscopy

  • Holler, Stefan
  • Moreno Segurado, Ángel J.
  • Zamponi, Michaela
  • Bačová, Petra
  • Willner, Lutz
  • Iatrou, Hermis
  • Falus, Peter
  • Richter, Dieter
We investigate the effect of the number of arms (functionality f) on the mobility of the branch point in symmetric star polymers. For this purpose we carry out large-scale molecular dynamics simulations of simple bead–spring stars and neutron spin echo (NSE) spectroscopy experiments on center labeled polyethylene stars. This labeling scheme unique to neutron scattering allows us to directly observe the branch point motion on the molecular scale by measuring the dynamic structure factor. We investigate the cases of different functionalities f = 3, 4, and 5 for different arm lengths. The analysis of the branch point fluctuations reveals a stronger localization with increasing functionality, following 2/f scaling. The dynamic structure factors of the branch point are analyzed in terms of a modified version, incorporating dynamic tube dilution (DTD), of the Vilgis–Boué model for cross-linked networks [ J. Polym. Sci., Part B 1988, 26, 2291−2302]. In DTD the tube parameters are renormalized with the tube survival probability φ(t). As directly measured by the simulations, φ(t) is independent of f, and therefore the theory predicts no f dependence of the relaxation of the branch point. The theory provides a good description of the NSE data and simulations for intermediate times. However, the simulations, which have access to much longer time scales, reveal the breakdown of the DTD prediction since increasing the functionality actually leads to a slower relaxation of the branch point., We acknowledge financial support from the projects MAT2015-63704-P (MINECO-Spain and FEDER-UE) and IT-654-13 (Basque Government, Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The very long-term physical aging of glassy polymers

  • Perez-de-Eulate, Natalia G.
  • Cangialosi, Daniele
The thermodynamic behavior of glasses well below the glass transition temperature (Tg) is scarcely explored due to the long time scales required for such investigation. Here, we characterize the thermodynamic state of several polymer glasses aged for about 30 years at room temperature, that is, at more than 100 K below their respective Tg(s). To this aim we employ differential scanning calorimetry (DSC), which, via specific heat, allows characterizing the enthalpy attained after a certain aging protocol and the way the glass with such an enthalpy devitrifies when heated. We complement these results with extensive DSC studies on these polymers aged under the same conditions of temperature for time scales ranging from minutes to months. The main outcome of the present work is that these polymers aged under these conditions reach a plateau in the enthalpy with partial enthalpy recovery and devitrify well below Tg. This result provides compelling evidence for the existence of a fast mechanism of equilibrium recovery, beyond the standard slow one in proximity of Tg. The analogy with other kinds of glasses is highlighted, stigmatizing the universality of such behavior. Finally, the way the fast mechanism of equilibrium recovery could be exploited to obtain glasses with a low energy state is discussed., The authors thank the University of the Basque Country and Basque Country Government (Ref. No. IT-654-13 (GV)), Depto. Educacion, Universidades e investigacion; and Spanish Government (Grant No. MAT2015-63704-P, (MINECO/FEDER, UE)) for their financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrafiltration of single-chain polymer nanoparticles through nanopores and nanoslits

  • Pomposo, José A.
  • Rubio-Cervilla, Jon
  • González, Edurne
  • Moreno Segurado, Ángel J.
  • Arbe, Arantxa
  • Colmenero de León, Juan
Understanding the translocation of soft, conformable single-chain polymer nanoparticles (SCNPs) with intricate topology through nanopores and nanoslits is of great interest for several potential applications, including modern single-molecule analytical characterization methods. This work focus on the ultrafiltration of an elastic SCNP of size R through a cylindrical pore of diameter D « R or a rectangular slit of width H « R under an elongational flow field. Concerning SCNP ultrafiltration through nanopores of different diameter, we find a scaling law in qualitative agreement with recent results concerning the ability of soft conformable nanoparticles to translocate through pores at least tenfold smaller in size. Moreover, SCNP ultrafiltration through rectangular nanoslits provides a simple way to determine the elasticity parameter of a real SCNP based on its experimentally determined minimum slit width for effective ultrafiltration., Financial support by the Spanish Ministry “Ministerio de Economia y Competitividad”, MAT2015-63704-P (MINECO/FEDER, UE), the Basque Government, IT-654-13, and the Gipuzkoako Foru Aldundia, Programa Red Gipuzkoana de Ciencia, Tecnología e Innovación 2017 (RED 101/17), is acknowledged. J.R.-C. is grateful to the Materials Physics Center MPC for his predoctoral grant. E. G. received funding from the “Fellows Gipuzkoa” fellowship of the Gipuzkoako Foru Aldundia., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Isolation of cyclic penta(ethylene oxide) from mixtures with its linear analog by combining selective intercalation into graphite oxide and solvent approaches

  • Ruiz Molina, Daniel
  • Alegría, Ángel
  • Barroso-Bujans, Fabienne
Cyclic oligomers of poly(ethylene oxide)s intercalate slower into graphite oxide (GO) than their linear analogs from the melt. In present study these kinetic differences are exploited to isolate 15-crown-5 (15C5) from mixtures with linear penta(ethylene glycol) (5EG) by using two approaches: a) melt intercalation and solvent extraction and b) intercalation from solution and filtration. In both cases we found that fractions highly enriched in the cyclic component are obtained by using an appropriate selection of the solvent. Solvents that do not penetrate the interlayer space of GO (such as CCl4 and toluene) lead to an increase of the cyclic fraction from 50 wt% in the initial mixture to values as high as 99 wt%. On the contrary, solvents that penetrate the interlayer space of GO produce fractions with low content of 15C5. The ability of non-penetrating solvents to achieve an effective isolation of 15C5 demonstrates that separation is driven by a faster intercalation of 5EG into unswollen GO, without solvent assistance, and the permanence of 15C5 in solution. These results are discussed in the light of data collected by X-ray diffraction, differential scanning calorimetry and gel permeation chromatography. This study provides substantial evidence of a very promising separation method for a topological purification of cyclic poly(ethylene oxide)s with GO., We gratefully acknowledge support from Spanish Ministry of Economy and Competitiveness, MINECO (MAT2015-63704-P) and Basque Government (IT-654-13)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of single‐ring nanoparticles mimicking natural cyclotides by a stepwise folding‐activation‐collapse process

  • Rubio-Cervilla, Jon
  • Frisch, Hendrik
  • Barner-Kowollik, Christopher
  • Pomposo, José A.
Cyclotides are small cyclic polypeptides found in a variety of organisms, ranging from bacteria to plants. Their ring structure endows those polypeptides with specific properties, such as improved stability against enzymatic degradation. Optimal cyclotide activity is often observed only in the presence of intra-ring disulfide bonds. Synthesis of soft nano-objects mimicking the conformation of natural cyclotides remains challenging. Here, a new class of natural cyclotide mimics synthesized by a stepwise folding-activation-collapse process at high dilution starting from simple synthetic precursor polymers is established. The initial folding step is carried out by a photoactivated hetero Diels-Alder (HDA) ring-closing reaction, which is accompanied by chain compaction of the individual precursor polymer chains as determined by size exclusion chromatography (SEC). The subsequent activation step comprises a simple azidation procedure, whereas the final collapse step is driven by CuAAC in the presence of an external cross-linker, providing additional compaction to the final single-ring nanoparticles (SRNPs). The unique structure and compaction degree of the SRNPs is established via a detailed comparison with conventional single-chain nanoparticles (SCNPs) prepared exclusively by chain collapse from the exact same precursor polymer (without the prefolding step). The stepwise folding-activation-collapse approach opens new avenues for the preparation of artificial cyclotide mimetics., Financial support by the Spanish Ministry “Ministerio de Economia y Competitividad”, MAT2015-63704-P (MINECO/ FEDER, UE), the Basque Government, IT-654-13, and the Gipuzkoako Foru Aldundia, RED 101/17, is acknowledged. J.R.-C. thanks the Materials Physics Center – MPC for support (mobility and Ph.D. grants). C.B.-K. acknowledges the Australian Research Council (ARC) in the context of a Laureate Fellowship, enabling his photochemical research program. H.F. acknowledges generous funding from the German National Academy of Science, Leopoldina., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Tesis doctoral (DoctoralThesis)

Dielectric relaxation and structure of complex materials: supramolecular ensembles and hybrid adhesives

  • Martínez-Rugerio, Gerardo
Manuscript presented to opt for Ph.D. degree in Physics of Nanostructures and Advanced Materials by Materials Physics Centre, Basque Country University., [ES]: El estudiar "la relajación dieléctrica y la estructura de materiales complejos: en entidades supra-moleculares y materiales híbridos", se refiere a la interpretación de resultados obtenidos por medio del análisis cuantitativo de los fenómenos de relajación dieléctrica y su relación con los resultados de su caracterización estructural, en particular, para dos diferentes familias de materiales poliméricos. Este tipo de materiales presentan una dinámica compleja, y en muchos casos exhiben relajaciones jerárquicas, que se extienden en un amplio rango de tamaños y escalas de tiempo. En esta tesis, y como primer sistema considerado, investigamos la relajación dieléctrica de un oligómero funcionalizado. Su unidad molecular esta compuesta por dos partes de distinta composición; un primer "bloque" esta compuesto por unidades de dimetilsiloxano y el segundo esta compuesto por una cadena alifática cuya terminación es un grupo funcional carboxilo. Centraremos la atención en la interpretación molecular y el rol que juegan las interacciones específicas en la relación entre la estructura y dinámica del material. Para ello, ha sido necesario una investigación comparativa entre dos sistemas similares pero cuyas interacciones específicas son distintas, en particular el grupo funcional terminal fue modificado reemplazando el grupo hidroxilo por el grupo metilo con el objetivo de bloquear las interacciones tipo puente de hidrógeno. Por otro lado hemos estudiado materiales complejos con relevancia en el desarrollo de nuevas aplicaciones industriales. En particular hemos estudiado materiales adhesivos híbridos sintetizados mediante mini emulsion. Específicamente, investigamos la relación entre las condiciones de síntesis, el análisis de la relajación dieléctrica y la caracterización estructural de los componentes solubles e insolubles de un material adhesivo híbrido compuesto por grupos acrílicos y poliuretanos. Una vez determinado el origen molecular de los procesos de relajación dieléctrica en estos materiales, se han comparado distintos materiales híbridos obtenidos mediante distintas condiciones de síntesis. Las técnica experimental empleada de forma intensiva a lo largo de esta tesis fue la espectroscopia dieléctrica en un amplio rango de frecuencias (BDS, BroadbandDielectric Spectroscopy por sus siglas en inglés). Para estudiar las propiedades estructurales de los materiales también se han realizado experimentos de difracción de rayos-X, análisis térmico mediante calorimetría diferencial de barrido y espectroscopia Infrarroja., [EN]: Dielectric relaxation and structure of complex materials: supramolecular ensembles and hybrid materials, refers to the interpretation of the results obtained by the dielectric relaxation analysis and the relation with the structural characterization of two different families of polymeric materials investigated, at different molecular levels. As the first system under study and due to practical reasons (well defined molecular-constituents materials) we studied the dielectric relaxation of small length carboxyl terminated dimethylsiloxane block-copolymers, centring the attention into understanding which was the role of specific interactions and their relation with the structure and dynamics. For this purpose, a comparative investigation of polymers with different specific interactions was necessary. A simple scenario of this problem was handled by the study of two different ODMS co-oligomer samples, which were expected to have distinct specific interactions. On the other hand and we have studied materials that are closer to technological applications. Particularly we investigate the relation of the synthetic conditions, dielectric relaxation analysis and structural characterization of different hybrid Acrylic-Polyurethane latex materials. The experimental techniques employed in both investigations were mostly dielectric spectroscopies in a broad range of frequencies have been combined to determine polymer dynamics. X-ray diffraction experiments have also been performed to study the structural properties of the materials. In addition, thermal calorimetric characterization has been used in the analysis., I would like to thank the financial support obtained from the University of Basque Country (UPV/EHU) for the Master's studies. And also the financial support given by the Materials Physics Centre (MPC) and the Basque country Government through the projects (IT-654-13 and nanoIKER2011-2013) and as well as the Ministerio de Economía y Competitividad (MAT2012-31088 and MAT2015-63704-P) for the fulfilment of the PhD program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Brushes of elastic single-chain nanoparticles on flat surfaces

  • Asenjo-Sanz, Isabel
  • Moreno Segurado, Ángel J.
  • Arbe, Arantxa
  • Colmenero de León, Juan
  • Pomposo, José A.
Single-chain polymer nanoparticles (SCNPs) are individual intrachain cross-linked polymer chains -typically with a size < 20 nm-which can be considered as emerging building blocks for bionanotechnology. Very recently, surfaces displaying molecular recognition motifs have been decorated with brushes of responsive SCNPs and transformed into a cross-linked polymeric monolayer, thus paving the way to controlled nanofilm formation around bioactive surfaces (e.g., virus capsids). In this work, the structural properties of brushes formed by topologically complex SCNPs on flat surfaces are investigated as a function of SCNP size and intrachain cross-linking degree. A detailed comparison is performed to the structural features displayed by brushes of other macromolecular architectures, thus revealing the tunable, unique properties of brushes comprising elastic SCNPs. Remarkably, this work paves the way to the potential design of brushes of SCNPs with drug delivery characteristics based on stimulus-mediated rupture of intrachain cross-links., Financial support by the Spanish Ministry “Ministerio de Economia y Competitividad” MAT2015-63704-P, (MINECO / FEDER, UE) and the Basque Government, IT-654-13, is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dielectric Relaxation as a Probe To Verify the Symmetrical Growth of Two-Arm Poly(glycidyl phenyl ether) Initiated by t-BuP 4 /Ethylene Glycol

  • Ochs, Jordan
  • Martínez-Tong, Daniel E.
  • Alegría, Ángel
  • Barroso-Bujans, Fabienne
Dielectric relaxation is used to verify the bidirectional growth of arms in poly(glycidyl phenyl ether) (PGPE) synthesized by ring-opening polymerization with ethylene glycol and a phosphazene base, t-BuP4, in the presence and absence of triisobutylaluminum (i-Bu3Al). The dielectric relaxation is highly sensitive to changes in the dipolar moment orientation along the chain contour, allowing us to precisely identify whether the polymer is composed by “one arm” or “two arms” as well as to verify the arm symmetry. By means of broadband dielectric spectroscopy (BDS), we evaluated the dipolar microstructure of synthesized polymers and observed that in the absence of i-Bu3Al the polymers are certainly composed by two symmetric arms, whereas those obtained in the presence of i-Bu3Al are contaminated with large amounts of “one-arm” byproducts, in agreement with the data obtained by MALDI-ToF MS. Furthermore, BDS allowed us to quantify the relative amounts of one-arm impurities in two-arm PGPE samples, an analysis that cannot be performed by either MALDI-ToF MS or NMR., We gratefullyacknowledge support from MINECO (MAT2015-63704-P) and Basque Government (IT-654-13 and PIBA 2018-34).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of molecular weight on vitrification kinetics and molecular mobility of a polymer glass confined at the microscale

  • Monnier, Xavier
  • Cangialosi, Daniele
We employ fast scanning calorimetry (FSC) to investigate how varying the molecular weight interferes in the vitrification kinetics and molecular mobility of micrometric poly(4-tert-butyl styrene) (PtBS). In line with recent results, we find marked negative deviations of the fictive temperature T, that is, the metric employed to characterize vitrification kinetics, with the sample size and for all molecular weights. In contrast, the molecular mobility remains size independent and bulk-like. This implies that vitrification kinetics and molecular mobility are decoupled. Furthermore, quantifying the magnitude of such decoupling through the Frenkel–Kobeko–Reiner approach, indicates that this is more pronounced in the high molecular weight samples than in the low molecular weight PtBS employed in the present work., We thank the University of the Basque Country and Basque Country Government (Ref. No. IT-654-13 (GV)), Depto. Educación, Universidades e investigación; and Spanish Government (Grant No. MAT2015-63704-P (MINECO/FEDER, UE)) for their financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Facile access to completely deuterated single-chain nanoparticles enabled by intramolecular azide photodecomposition

  • Rubio-Cervilla, Jon
  • Malo de Molina, Paula
  • Robles-Hernández, Beatriz
  • Arbe, Arantxa
  • Moreno Segurado, Ángel J.
  • Alegría, Ángel
  • Colmenero de León, Juan
  • Pomposo, José A.
Access to completely deuterated single-chain nanoparticles (dSCNPs) has remained an unresolved issue. Herein, the first facile and efficient procedure to produce dSCNPs is reported, which comprises: i) the use of commercially available perdeuterated cyclic ether monomers as starting reagents, ii) a ring-opening copolymerization process performed in bulk to produce a neat dSCNP precursor, iii) a standard azidation reaction to decorate this precursor with azide moieties, and iv) a facile intramolecular azide photodecomposition step carried out under UV irradiation at high dilution providing with highly valuable, completely deuterated soft nano-objects from the precursor. dSCNPs are used to investigate by means of neutron-scattering measurements the form factor (radius of gyration, scaling exponent) of polyethylene oxide (PEO) chains in nanocomposites with different amounts of dSCNPs. Moreover, to illustrate the possibilities offered by the synthetic route disclosed in this communication for potential applications, the significant reduction in viscosity observed in a pure melt of polyether-based single-chain nanoparticles when compared to a melt of the corresponding linear polymer chains is shown., Financial support by the Spanish Ministry “Ministerio de Economia y Competitividad,” MAT2015‐63704‐P (MINECO/FEDER, UE), the Basque Government, IT‐654‐13, and the Gipuzkoako Foru Aldundia, Programa Red Guipuzcoana de Ciencia, and Tecnología e Innovación 2017 (RED 101/17) is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Glass-transition dynamics of mixtures of linear poly(vinyl methyl ether) with single-chain polymer nanoparticles: Evidence of a new type of nanocomposite materials

  • Robles-Hernández, Beatriz
  • González-Burgos, Marina
  • Pomposo, José A.
  • Colmenero de León, Juan
  • Alegría, Ángel
Single-chain polymer nanoparticles (SCNPs) obtained through chain collapse by intramolecular cross-linking are attracting increasing interest as components of all-polymer nanocomposites, among other applications. We present a dielectric relaxation study on the dynamics of mixtures of poly(vinyl methyl ether) (PVME) and polystyrene (PS)-based SCNPs with various compositions. Analogous dielectric measurements on a miscible blend of PVME with the linear precursor chains of the SCNPs are taken as reference for this study. Both systems present completely different behaviors: While the blend with the linear precursor presents dynamics very similar to that reported for PVME/PS miscible blends, in the PVME/SCNP mixtures there are an appreciable amount of PVME segments that are barely affected by the presence of SCNPs, which nearly vanishes only for mixtures with high SCNP content. Interestingly, in the frame of a simple two-phase system, our findings point towards the existence of a SCNP-rich phase with a constant PVME fraction, regardless of the overall concentration of the mixture. Moreover, the dynamics of the PVME segments in this SCNP-rich phase display an extreme dynamic heterogeneity, a signature of constraint effects., This research was funded by Eusko Jaurlaritza project code: IT-654-13 and the Ministerio de Economía y Competitividad project code: MAT2015-63704-P (MINECO/FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of chain primary structure and topology (Branching) on crystallization and thermal properties: the case of polysulfides

  • Pérez-Camargo, Ricardo A.
  • D'Arcy, Richard
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Tirelli, Nicola
  • Müller, Alejandro J.
We have investigated how variations in primary structure (distribution of monomeric units, chain length) and degree of branching affect the crystallization behavior of polysulfides. In particular, we have used copolymers of crystallizable (ethylene sulfide, ES) and non-crystallizable (propylene sulfide, PS) units, prepared via anionic ring-opening mechanism. PS units interrupt the crystallization of ES sequences; therefore, strong differences in thermal properties are expected between copolymers with a gradient (single addition of ES/PS mixtures) or a semirandom structure (sequential additions, which yield a more constant composition along the chain). Additionally, we prepared different chain topologies: linear, 4- and 8-armed stars, and combs with 10, 15, and 20 arms, in a comparison where each arm had a gradient primary structure and degree of polymerization (DP) of 10, 20, and 30. The influence of these variables (topology, number of arms, and DP) on the thermal properties was studied by polarized light optical microscopy (PLOM), standard and advanced DSC techniques (i.e., self-nucleation and successive self-nucleation and annealing (SSA)), and small and wide angle X-ray scattering (WAXS and SAXS). First, we have confirmed the much higher order obtained in gradient polymers, in comparison to the semirandom ones. Second, we have seen that the type of crowding of polymer chains affected the level of order achievable. In star polymers, an increasing number of arms increased topological restrictions, which in turn decreased crystallization and melting temperatures, crystallinity, and lamellar thickness. For combs, which are characterized by a more parallel than convergent crowding of the chains, the increase in arms number did not produce a significant decrease in crystalline order; on the contrary, the higher density of chains caused moderate increases in crystallization and melting temperatures, crystallinity, and lamellar thickness., The POLYMAT/UPV/EHU team would like to acknowledge funding from the following projects: UPV/EHU Infrastructure: INF 14/38; Mineco/FEDER: SINF 130I001726XV1/Ref: UNPV13-4E-1726; and Mineco MAT2017-83014-C2-1-P*. R.A.P.-C. gratefully acknowledges the award of a Ph.D. fellowship by POLYMAT Basque Center for Macromolecular Design and Engineering. A.A. and A.I. acknowledge financial support from IT-654-13 and MAT2015-63704-P (MINECO/ FEDER, UE). We gratefully acknowledge the ALBA synchrotron facility (Proposal Number: 2018022683) for the funding and help to perform experiments at BL11-NCDSWEET beamline with the collaboration of ALBA staff.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymer chain diffusion in polymer blends. A theoretical interpretation based on a memory function formalism

  • Colmenero de León, Juan
The diffusion of polymer chains in miscible polymer blends with large dynamic asymmetry—those where the two blend components display very different segmental mobility—is not well understood yet. In the extreme case of the blend system of poly(ethylene oxide) (PEO) and poly(methyl methacrylate)(PMMA), the diffusion coefficient of PEO chains in the blend can change by more than five orders of magnitude while the segmental time scale hardly changes with respect to that of pure PEO. This behavior is not observed in blend systems with small or moderate dynamic asymmetry as, for instance, polyisoprene/poly(vinyl ethylene) blends. These two very different behaviors can be understood and quantitatively explained in a unified way in the framework of a memory function formalism, which takes into account the effect of the collective dynamics on the chain dynamics of a tagged chain., The author gratefully acknowledges the financial support of the Basque Government, project code: IT-654-13 and the Ministerio de Economía y Competitividad, project code: MAT2015-63704-P (MINECO/FEDER, UE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-chain nanoparticles under homogeneous shear flow

  • Formanek, Maud
  • Moreno Segurado, Ángel J.
Single-chain nanoparticles (SCNPs) are a new class of macromolecular objects, synthesized through purely intramolecular cross-linking of single polymer chains. We use a multiscale hydrodynamics simulation approach to study, for the first time, SCNPs under shear flow. We investigate the case of irreversible SCNPs (permanent cross-links) in dilute solution. SCNPs emerge as a novel class of macromolecular objects with response to shear distinct from other systems such as linear chains, star polymers, rings, or dendrimers. This is evidenced by the observed set of scaling exponents for the shear rate dependence of the SCNP static and dynamic properties. Surprisingly, these exponents are, at most, marginally dependent on the specific topology of the SCNP (globular or sparse), suggesting that they are inherently related to the network-like character of the molecular architecture and not to its specific connectivity. At high Weissenberg numbers the dynamics of the sparse SCNPs is dominated by tumbling motion. Coexistence of tumbling and tank treading is observed for the most globular SCNPs., We acknowledge financial support from the projects MAT2015-63704-P (MINECO-Spain and FEDER-UE) and IT-654-13 (Basque Government, Spain).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface reconstruction of chiral glassy oligomers under the action of volatile organic compounds (VOCs)

  • Shibaev, Petr
  • Carrozzi, Daniel
  • Vigilia, Lee
  • Panariti, Anthony
  • Schwartz, Gustavo A.
The response of chiral polymers to volatile organic compounds (VOCs) was studied by atomic force microscopy. It was found that under the influence of toluene vapour, the focal conic domains on the surface of chiral polymer undergo remarkable reconstruction that is at least partially reversible. This opens new ways for building VOC sensors and using surface reconstruction in creating new surface patterns for nanotechnology., Financial support for PS from Fordham Faculty Fellowship. This work was partially Supported by the Spanish Ministry ‘Ministerio de Economía y Competitividad’, code: MAT2015-63704-P [MINECO/FEDER, UE].
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Glass transition and crystallization in colloidal polymer nanoparticles

  • Cangialosi, Daniele
  • Nogales, Aurora
Colloidal polymer nanoparticles have recently attracted great interest as a result of their use in a wide range of applications including drug delivery, biolabeling, advanced biological sensors, photonic crystals, etc. The large interfacial area of nanoparticles may induce profound changes in the properties of the polymers, a fact which is of utmost importance from both technological and fundamental viewpoints, DC acknowledges financial support from the project MAT2015-63704-P, (MINECO/FEDER, UE) and PGC2018-094548-B-I00 (MICINN-Spain and FEDER-UE), and the Basque Government (Grant No. IT-654-13 (GV)). AN acknowledges financial support from the Spanish Ministry of Economy (Grant No. MAT2014-59187-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The importance of quantifying the composition of the amorphous intermixed phase in organic solar cells

  • Marina, Sara
  • Kaufmann, Noëmi Petrina
  • Karki, Akchheta
  • Gutiérrez-Meza, Elizabeth
  • Gutiérrez-Fernández, Edgar
  • Vollbrecht, Joachim
  • Solano, Eduardo
  • Walker, Barnaby
  • Bannock, James H.
  • Mello, John de
  • Silva, Carlos
  • Nguyen, Thuc-Quyen
  • Cangialosi, Daniele
  • Stingelin, Natalie
  • Martín, Jaime
The relation of phase morphology and solid‐state microstructure with organic photovoltaic (OPV) device performance has intensely been investigated over the last twenty years. While it has been established that a combination of donor:acceptor intermixing and presence of relatively phase‐pure donor and acceptor domains is needed to get an optimum compromise between charge generation and charge transport/charge extraction, a quantitative picture of how much intermixing is needed is still lacking. This is mainly due to the difficulty in quantitatively analyzing the intermixed phase, which generally is amorphous. Here, fast scanning calorimetry, which allows measurement of device‐relevant thin films (<200 nm thickness), is exploited to deduce the precise composition of the intermixed phase in bulk‐heterojunction structures. The power of fast scanning calorimetry is illustrated by considering two polymer:fullerene model systems. Somewhat surprisingly, it is found that a relatively small fraction (<15 wt%) of an acceptor in the intermixed amorphous phase leads to efficient charge generation. In contrast, charge transport can only be sustained in blends with a significant amount of the acceptor in the intermixed phase (in this case: ≈58 wt%). This example shows that fast scanning calorimetry is an important tool for establishing a complete compositional characterization of organic bulk heterojunctions. Hence, it will be critical in advancing quantitative morphology–function models that allow for the rational design of these devices, and in delivering insights in, for example, solar cell degradation mechanisms via phase separation, especially for more complex high‐performing systems such as nonfullerene acceptor:polymer bulk heterojunctions., J.M. thanks MCIU for the Ramón y Cajal contract and the Ikerbasque Foundation for the Ikerbasque Research Fellow program. J.M is also grateful to MCIU (Ref. PGC2018‐094620‐A‐I00), to Basque Country Government (Ref. PIBA19‐0051). S.M. is grateful to POLYMAT for the doctoral scholarship. J.M and E.G.‐F. acknowledge support through the European Union's Horizon 2020 research and innovation program, H2020‐FETOPEN‐01‐2018‐2020 (FET‐Open Challenging Current Thinking), “LION‐HEARTED”, grant agreement no. 828984. N.S. in addition gratefully acknowledges support from the IdEx Bordeaux Excellence program (ANR‐10‐IDEX‐03‐02). D.C. acknowledges the Basque Country Government (Ref. No. IT‐654‐ 13 (GV)) and MINECO (Grant No. MAT2015‐63704‐P) for their financial support. The work at Georgia Tech was supported by the National Science Foundation (DMR‐1729737). J.V. acknowledges funding by the Alexander‐von‐Humboldt Stiftung. The authors would like to thank the financial support provided by the IONBIKE RISE project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska‐Curie grant agreement No 823989. T.Q.N. acknowledges support from the Organic Materials Chemistry Program, Air Force Office of Scientific Research (grant no. FA9550‐19‐1‐0348)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An unexpected route to aldehyde-decorated single-chain nanoparticles from azides

  • González-Burgos, Marina
  • Alegría, Ángel
  • Arbe, Arantxa
  • Colmenero de León, Juan
  • Pomposo, José A.
We disclose herein a new route towards the straightforward synthesis of aldehyde-decorated ultrafine single-chain nanoparticles based on microwave-assisted decomposition of azide-containing precursors in N,N-dimethylformamide (DMF) or N-methylpyrrolidone (NMP)., Financial support by the Spanish Ministry “Ministerio de Economia y Competitividad”, MAT2015-63704-P (MINECO/FEDER, UE) and the Basque Government, IT-654-13, is acknowledged. M. G.-B. is grateful to the University of the Basque Country for her UPV/EHU pre-doctoral grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Application of SSA thermal fractionation and X-ray diffraction to elucidate comonomer inclusion or exclusion from the crystalline phases in poly(butylene succinate-ran-butylene azelate) random copolymers

  • Arandia, Idoia
  • Múgica, Agurtzane
  • Zubitur, Manuela
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Liu, Guoming
  • Wang, Dujin
  • Mincheva, Rosica
  • Dubois, Philippe
  • Müller, Alejandro J.
Poly(butylene succinate-ran-butylene azelate) random copolyesters were thermally fractionated by successive self-nucleation and annealing (SSA). The samples before and after SSA were analyzed by differential scanning calorimetry (DSC) and X-ray diffraction (WAXS and SAXS). WAXS results indicate that a small degree of comonomer inclusion is present in the crystalline phases that are formed in the copolymers depending on composition: a PBS-like unit cell or/and a PBAz-like unit cell, thus confirming the isodimorphic behavior of the samples. SSA on the other hand demonstrated that the degree of comonomer exclusion during crystallization is far larger than comonomer inclusion, as judged by the increase in fractionation degree with compositions leading to the pseudo-eutectic point. Furthermore, WAXS, SAXS, and SSA results show that the isodimorphic behavior is not highly dependent on kinetic factors, as the degree of comonomer inclusion or exclusion in the samples was not significantly altered by SSA thermal fractionation, a thermal treatment that promotes annealing and molecular segregation of defects to the amorphous regions of the material., I. A. acknowledges the fellowship from the University of the Basque Country UPV/EHU. Financial support is acknowledged from UPV/EHU (UFI11/56), “UPV/EHU Infrastructure: INF 14/38”; “Mineco/FEDER: SINF 130I001726XV1/Ref: UNPV13–4E–1726” and “Mineco MAT2014-53437-C2-P”. G.M.L acknowledges the support from the Youth Innovation Promotion Association of CAS (2015026). A.A. and A.I. acknowledge financial support from the Projects MAT2012-31088 and MAT2015-63704-P (Spanish-MINECO and EU) and IT-654-13 (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A solvent-based strategy for tuning the internal structure of metallo-folded single-chain nanoparticles

  • Basasoro, Senda
  • González-Burgos, Marina
  • Moreno Segurado, Ángel J.
  • Lo Verso, Federica
  • Arbe, Arantxa
  • Colmenero de León, Juan
  • Pomposo, José A.
Controlling the spatial distribution of catalytic sites in metallo-folded single-chain nanoparticles (SCNPs) is a first step toward the rational design of improved catalytic soft nano-objects. Here an unexplored pathway is reported for tuning the internal structure of metallo-folded SCNPs. Unlike the conventional SCNP synthesis in good solvent (protocol I), the proposed new route (protocol II) is based on the use of amphiphilic random copolymers and transfer, after SCNP formation, from selective to good (nonselective) solvent conditions. The size and morphology of the SCNPs obtained by the two protocols, and the corresponding spatial distribution of the catalytic sites, have been determined by combining results from size exclusion chromatography with triple detection, small-angle X-ray scattering and molecular dynamics (MD) simulations. Remarkably, the use of these protocols allows the tuning of the internal structure of the metallo-folded SCNPs, as supported by MD simulations results. While the conventional protocol I yields a homogeneous distribution of the catalytic sites in the SCNP, these are arranged into clusters in the case of protocol II., Financial support from the projects MAT2015-63704-P (MINECO) and IT-654-13 (GV) is acknowledged. M.G.-B. is grateful to the University of the Basque Country for her UPV/EHU pre-doctoral grant., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Confined water as model of supercooled water

  • Cerveny, Silvina
  • Mallamace, Francesco
  • Swenson, Jan
  • Vogel, Michael
  • Xu, Limei
Water in confined geometries has obvious relevance in biology, geology, and other areas where the material properties are strongly dependent on the amount and behavior of water in these types of materials. Another reason to restrict the size of water domains by different types of geometrical confinements has been the possibility to study the structural and dynamical behavior of water in the deeply supercooled regime (e.g., 150–230 K at ambient pressure), where bulk water immediately crystallizes to ice. In this paper we give a short review of studies with this particular goal. However, from these studies it is also clear that the interpretations of the experimental data are far from evident. Therefore, we present three main interpretations to explain the experimental data, and we discuss their advantages and disadvantages. Unfortunately, none of the proposed scenarios is able to predict all the observations for supercooled and glassy bulk water, indicating that either the structural and dynamical alterations of confined water are too severe to make predictions for bulk water or the differences in how the studied water has been prepared (applied cooling rate, resulting density of the water, etc.) are too large for direct and quantitative comparisons., This review was initiated during the Nordita (Nordic Institute for Theoretical Physics) scientific program “Water - the Most Anomalous Liquid”. Additional financial support for this program was provided by the Royal Swedish Academy of Sciences through its Nobel Institutes for Physics and Chemistry, by the Swedish Research Council, and by the Department of Physics at Stockholm University. Furthermore, M.V. thanks the Deutsche Forschungsgemeinschaft for funding through Grants Vo-905/8-2 and Vo-905/9-2. S.C. thanks the Basque government for support through the Nanoiker Project (Grant IE14-393) under the ETORTEK Program and the Spanish Ministry of Education, (MAT2015-63704-P). J.S. acknowledges the Swedish Research Council (Grant 621-2012-4013) for further financial support. L.X. acknowledges support from the NSFC (11174006, 11290162, and 11525520) and National Basic Research Program of China (973 program) (2012CB921404 and 2015CB856801)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dielectric relaxation analysis of hybrid acrylic–polyurethane gels

  • Martínez-Rugerio, Gerardo
  • Alegría, Ángel
  • Arbe, Arantxa
  • Daniloska, Vesna
  • Colmenero de León, Juan
In this paper we present a dielectric relaxation analysis of three acrylic–polyurethane gel samples in connection with their synthesis conditions. The dielectric analysis was carried out using broadband dielectric spectroscopy (BDS). Additionally, differential scanning calorimetry (DSC) and small angle X-ray scattering (SAXS) measurements were performed. The thermodynamic characterization outcomes evidence very similar characteristics of the glass transition phenomena among the investigated samples without any signature of melting or crystallization. X-ray diffraction patterns evidence distinctive features for the three gel samples in two different regions, i.e., at high and low values of the scattering vector q. BDS measurements, identify three distinct dielectric relaxation processes above Tg. Particularly, differences in the dielectric parameters of the slowest relaxation process have been rationalized in connection with the synthesis method used. Our results show that the analysis of these acrylic–polyurethane gels by BDS – in combination with SAXS – provides access to characteristics of the network structure that would ultimately influence the properties of these materials., The authors gratefully acknowledge the financial support of the Basque Government project codes: IT-654-13 and nanoIKER2011-2013 (Etortek program) and also the Spanish Ministerio de Economía y competitividad and EU, project codes: MAT2012-31088 and MAT2015-63704-P., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dielectric relaxation of polymers: segmental dynamics under structural constraints

  • Alegría, Ángel
  • Colmenero de León, Juan
In this article we review the recent polymer literature where dielectric spectroscopy has been used to investigate the segmental dynamics of polymers under the constraints produced by self-structuring. Specifically, we consider three cases: (i) semicrystalline polymers, (ii) segregated block-copolymers, and (iii) asymmetric miscible polymer blends. In these three situations the characteristics of the dielectric relaxation associated with the polymer segmental dynamics are markedly affected by the constraints imposed by the corresponding structural features. After reviewing in detail each of the polymer systems, the most common aspects are discussed in the context of the use of dielectric relaxation as a sensitive tool for analyzing structural features in nanostructured polymer systems., The financial support from Projects MAT2015-63704-P (MINECO/FEDER, UE) and IT-654-13 (Basque Government) is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dielectric susceptibility of liquid water: Microscopic insights from coherent and incoherent neutron scattering

  • Arbe, Arantxa
  • Malo de Molina, Paula
  • Álvarez González, Fernando
  • Frick, Bernhard
  • Colmenero de León, Juan
The analysis of neutron scattering results on H dynamics (H2O) and the dynamic structure factor (D2O) around the intermolecular peak and at intermediate length scales in terms of the susceptibilities reveals three processes (diffusive, local relaxational and vibrational) at frequencies below 3 THz, to which the contributions commonly invoked in dielectric studies can be directly mapped. We achieve a unified description of the results from both techniques, clarifying the nature of the molecular motions involved in the dielectric spectra and their impact on the structural relaxation., Financial support by the Spanish Ministry ’Ministerio de Economia y Competitividad, code: MAT2015-63704-P (MINECO/FEDER, UE) and by the Eusko Jaurlaritza (Basque Government), code: IT-654-13 is acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct measurement of glass transition temperature in exposed and buried adsorbed polymer nanolayers

  • Burroughs, Mary J.
  • Napolitano, Simone
  • Cangialosi, Daniele
  • Priestley, Rodney D.
We employ a fluorescence bilayer method to directly measure the glass transition temperature (Tg) of the irreversibly adsorbed layer of polystyrene (PS) buried in bulk films as a function of adsorption time, tads. This bilayer geometry allows for the examination of interfacial effects on Tg of the adsorbed nanolayer. In the presence of a free surface, we observe a substantial reduction in Tg from bulk that lessens with tads as a result of increased chain adsorption at the substrate. Submerging the adsorbed layer and effectively removing the free surface results in a suppression of the Tg deviation at early tads, suggesting chain adsorption dictates Tg at long tads. Annealing in the bilayer geometry promotes recovery of bulk Tg on a time scale reflecting the degree of adsorption. Our data are quantitatively rationalized via the free volume holes diffusion model, which explains adsorbed nanolayer Tg in terms of the diffusion of free volume pockets toward interfacial sinks., R.D.P. acknowledges support of the NSF Materials Research Science and Engineering Center program through the Princeton Center for Complex Materials (DMR-1420541) and the Air Force Office of Scientific Research YIP Award (FA9550-12-1-0223). D.C. acknowledges the Spanish Ministry of Education (Project MAT2015-63704-P). S.N. acknowledges the Fonds de la Recherche Scientifique FNRS under Grant no. T.0037.15 “INCODYNCO”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamics and structure of poly(ethylene oxide) intercalated in the nanopores of resorcinol–formaldehyde resin nanoparticles

  • Barroso-Bujans, Fabienne
  • Cerveny, Silvina
  • Palomino, Pablo
  • Enciso, Eduardo
  • Rudić, Svemir
  • Fernández-Alonso, Félix
  • Alegría, Ángel
  • Colmenero de León, Juan
The incorporation of high-molecular-weight poly(ethylene oxide) (PEO) in the nanopores of resorcinol–formaldehyde resin nanoparticles (RNPs) leads to the suppression of polymer crystallization, changes in the chain conformation, and a noticeable slowdown of the two dielectric relaxations that reflect the segmental and local PEO dynamics. Both relaxations are significantly slower than those corresponding to bulk PEO. These results are independent of the pore characteristics of the different RNP materials. The segmental relaxation shows a crossover at ca. 220 K in its temperature dependence from non-Arrhenius to Arrhenius-like behavior on cooling. These results suggest the occurrence of limited cooperativity at low temperatures due to the enhancement of long-living hydrogen bonding between PEO and RNP pore walls., The authors gratefully acknowledge the support of the Spanish Ministry “Ministerio de Economıa y Competitividad ́ ”, code: MAT2015-63704-P (MINECO/FEDER, UE), the Basque Government (IT-654-13), and the UK Science and Technology Facilities Council for the provision of beam time on the TOSCA spectrometer. P.P. acknowledges a PhD research contract from UCM (BE45/10). F.F.A. and S.R. acknowledge financial support from the UK Science and Technology Facilities Council., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hierarchical aging pathways and reversible fragile-to-strong transition upon annealing of a metallic glass former

  • Gallino, Isabella
  • Cangialosi, Daniele
  • Evenson, Zach
  • Schmitt, Lisa
  • Hechler, Simon
  • Stolpe, Moritz
  • Ruta, Beatrice
The change of physical properties during aging and the associated microscopic dynamics of the Au49Cu26.9Si16.3Ag5.5Pd2.3 bulk metallic glass are investigated using a broad collection of laboratory and synchrotron-based techniques, such as differential- and fast-scanning calorimetry, thermomechanical testing, and x-ray photon correlation spectroscopy. We observe multiple decays in the enthalpy change during aging. This is reflected by a microscopic ordering consisting of distinct stationary dynamical regimes interconnected by abrupt aging processes. The stationary regimes are representative of states of local and transient equilibrium with increasingly higher activation energies. Furthermore, the aging study is conducted with the kinetically fragile frozen-in structure and the underlying fragile-to-strong transition is accessed by the ultra-viscous liquid state during annealing on a long-time scale and corresponds to the last observed enthalpy equilibration decay. The experimental work verifies, for the first time, that in a metallic glass forming system, the fragile-to-strong transition can also occur below the conventional glass transition temperature. Upon reheating, the reverse transformation, i.e. the strong-to-fragile transition, is observed with an entropy change of 0.19 J/(g-atom K), which is 2.4% of the entropy of fusion., This work was supported by the German Research Foundation (DFG) through [Grant No. GA 1721/2-2]. D. Cangialosi acknowledges the Department of Education, Universities and Research of the Basque Government [Grant No. IT-654-13 (GV)], and the Spanish Government through the MINECO/FEDER, UE [Grant No. MAT2015-63704-P] for their financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Linear viscoelastic and dielectric relaxation response of unentangled UPy-based supramolecular networks

  • Shabbir, Aamir
  • Javakhishvili, Irakli
  • Cerveny, Silvina
  • Hvilsted, Søren
  • Skov, Anne Ladegaard
  • Hassager, Ole
  • Alvarez, Nicolas J.
Supramolecular polymers possess versatile mechanical properties and a unique ability to respond to external stimuli. Understanding the rich dynamics of such associative polymers is essential for tailoring user-defined properties in many products. Linear copolymers of 2-methoxyethyl acrylate (MEA) and varying amounts of 2-ureido-4[1H]-pyrimidone (UPy) quadruple hydrogen-bonding side units were synthesized via free radical polymerization. Their linear viscoelastic response was studied via small amplitude oscillatory shear (SAOS). The measured linear viscoelastic envelope (LVE) resembles that of a well-entangled polymer melt with a distinct plateau modulus. Dielectric relaxation spectroscopy (DRS) was employed to independently examine the lifetime of hydrogen bond units. DRS reveals a high frequency α-relaxation associated with the dynamic glass transition, followed by a slower α*-relaxation attributed to the reversible UPy hydrogen bonds. This time scale is referred to as the bare lifetime of hydrogen bonding units. Using the sticky Rouse model and a renormalized lifetime, we predict satisfactorily the LVE response for varying amounts of UPy side groups. The deviation from the sticky Rouse prediction is attributed to polydispersity in the distribution of UPy groups along the chain backbone. We conclude that the response of associating polymers in linear viscoelasticity is general and does not depend on the chemistry of association, but rather on the polymer molecular weight (MW) and MW distribution, the number of stickers per chain, ns, and the distribution of stickers along the backbone., The work leading to these results has received funding from the People Programme (Marie Curie Actions) of the European Union’s Seventh Framework Programme (FP7/2007-2013) under REA grant agreement no. 607937 and the Danish National Advanced Technology Foundation (grant no. 55-2013-3). The ETORTEK Program and the Spanish Ministry of Education (MAT2015-63704-P) are also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase behavior of side-chain liquid-crystalline polymers containing biphenyl mesogens with different spacer lengths synthesized via miniemulsion polymerization

  • Mehravar, Ehsan
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Asua, José M.
  • Leiza, Jose R.
The synthesis of a series of methacrylate side-chain liquid crystal polymers (SCLCPs) bearing biphenyl mesogen with different spacer lengths and a fixed tail, poly[ethyl 4′-((n-(methacryloyloxy)alkyl)oxy)-[1,1′-biphenyl]-4-carboxylate]s (n-PMLCM, n = 3, 4, 5, 6), in aqueous media by free radical miniemulsion polymerization is described. This method offers the advantage of producing high molar masses (>105 Da) and full monomer conversion, not possible to achieve with conventional routes (solution polymerization). The resulting n-PMLCMs proved to have high thermal stability. The phase behaviors of the polymers were investigated by a combination of techniques including differential scanning calorimetry, polarized light microscopy, and small and wide angle X-ray scattering. The results show mesomorphic liquid crystalline behavior with a monolayer structure where the side-groups on both sides of the backbone would be interpenetrated. The liquid crystal phase transition of n-PMLCM follows the sequence smectic E (smectic E or smectic C for 4-PMLCM) ↔ smectic A ↔ isotropic liquid. The transition temperatures and the associated entropy changes exhibit a distinct odd–even effect as the length and parity of the spacer are varied, with the odd members exhibiting the higher values. The high molar masses achievable using miniemulsion polymerization translate into a more perfect and stable ordering, characterized by larger lamellar domains and higher transition temperatures, than in low molar mass SCLCPs. Compared to polymeric liquid crystals with similar mesogens but shorter tails, we found that longer tails facilitate the ordering of the mesogens and allow more efficient packing around the backbones, imparting a high stability to the smectic phases formed., The financial support from the Industrial Liaison Program on Polymerization in Dispersed Media (Akzo Nobel, Allnex, Arkema, BASF, Foresa, Nuplex Resin, Solvay, Stahl, Synthomer, Vinavil, Wacker) is gratefully acknowledged. A. A. and A. I. acknowledge financial support from the projects MAT2015-63704-P (Spanish-MINECO) and IT-654-13 (Basque Government). J. R. L. acknowledges financial support from the project CTQ2014-59016-R (MINECO)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of dynamic asymmetry on the collective dynamics of comblike polymers: Insights from neutron spin-echo experiments and coarse-grained molecular dynamics simulations

  • Arbe, Arantxa
  • Moreno Segurado, Ángel J.
  • Allgaier, Jürgen
  • Ivanova, Oxana
  • Fouquet, Peter
  • Colmenero de León, Juan
  • Richter, Dieter
We investigate the collective dynamics of comblike polymers displaying nanosegregation in side groups and main-chain rich domains, where side groups and backbones are dynamically equivalent. Neutron spin-echo experiments on poly(alkylene oxide)s with increasing side-group length have been focused on the decay of inter- and intradomain correlations and are complemented with molecular dynamics simulations on a coarse-grained model. In general, a good qualitative agreement between simulation and experiment is found. The collective times at inter- and intradomain levels converge with decreasing temperature, implying a common glass transition, and separate at high temperatures, revealing an increasing role of connectivity. The features of collective relaxations—regarding stretching, characteristic time, and temperature dependence—are independent of branching. The standard stretching for side-group motions and the closeness of collective and self-motions show that the anomalies exhibited by dynamically asymmetric comblike macromolecules disappear., The authors acknowledge financial support from the projects MAT2015-63704-P (Spanish-MINECO and EU) and IT-654-13 (Basque Government). This work is partially based on experiments performed at JCNS-instrument J-NSE (Heinz Maier-Leibnitz Zentrum (MLZ), Garching, Germany) and has been supported by the European Commission under the seventh Framework Programme through the “Research Infrastructures” action of the “Capacities” Programme, NMI3-II Grant 283883, and through the grant agreement for the Integrated Infrastructure Initiative N. 262348 European Soft Matter Infrastructure (ESMI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single chain dynamic structure factor of linear polymers in an all-polymer nano-composite

  • Arbe, Arantxa
  • Pomposo, José A.
  • Asenjo-Sanz, Isabel
  • Bhowmik, Debsindhu
  • Ivanova, Oxana
  • Kohlbrecher, Joachim
  • Colmenero de León, Juan
We present neutron spin echo (NSE) experiments on the single chain dynamic structure factor of long poly(ethylene oxide) (PEO) linear chains in the presence of poly(methyl methacrylate)-based single-chain nanoparticles (SCNPs). A complementary structural characterization of the system discards a significant interpenetration of the components and reveals a close to globular conformation of the SCNPs when surrounded by PEO chains. Analogous NSE measurements on blends of PEO with the linear precursor chains of the SCNPs are taken as a reference for the dynamics study. For short times (below approximately 5 ns) PEO in both mixtures exhibits slowed down Rouse dynamics with respect to bulk PEO behavior. The similar deceleration observed in both environments suggests this effect to be due to the large dynamic asymmetry in the mixtures as evidenced by DSC experiments. More interestingly, the NSE results at longer times reveal a spectacular increase of the explored volume of PEO chains in the all-polymer nanocomposite that is absent in the blend with linear precursor chains: assuming the reptation model, the apparent tube diameter confining PEO chain motions in the nanocomposite is about 80% larger than in bulk PEO. This can be considered as the first NSE direct observation of disentanglement in a nanocomposite., Financial support from Projects MAT2012-31088, MAT2015-63704-P, and IT-654-13 (GV) is acknowledged. This work is based on experiments performed at JCNS-instrument JNSE (Heinz Maier-Leibnitz Zentrum (MLZ), Garching, Germany) and at SANS-1 (SINQ, Paul Scherrer Institute, Villigen, Switzerland), and has been supported by the European Commission under the seventh Framework Programme through the “Research Infrastructures” action of the “Capacities” Programme, NMI3-II Grant Number 283883., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure and component dynamics in binary mixtures of poly(2-(dimethylamino)ethyl methacrylate) with water and tetrahydrofuran: A diffraction, calorimetric, and dielectric spectroscopy study

  • Goracci, Guido
  • Arbe, Arantxa
  • Alegría, Ángel
  • Su, Y.
  • Gasser, Urs
  • Colmenero de León, Juan
We have combined X-ray diffraction, neutron diffraction with polarization analysis, small angle neutron scattering, differential scanning calorimetry, and broad band dielectric spectroscopy to investigate the structure and dynamics of binary mixtures of poly(2-(dimethylamino)ethyl methacrylate) with either water or tetrahydrofuran (THF) at different concentrations. Aqueous mixtures are characterized by a highly heterogeneous structure where water clusters coexist with an underlying nano-segregation of main chains and side groups of the polymeric matrix. THF molecules are homogeneously distributed among the polymeric nano-domains for concentrations of one THF molecule/monomer or lower. A more heterogeneous situation is found for higher THF amounts, but without evidences for solvent clusters. In THF-mixtures, we observe a remarkable reduction of the glass-transition temperature which is enhanced with increasing amount of solvent but seems to reach saturation at high THF concentrations. Adding THF markedly reduces the activation energy of the polymer β-relaxation. The presence of THF molecules seemingly hinders a slow component of this process which is active in the dry state. The aqueous mixtures present a strikingly broad glass-transition feature, revealing a highly heterogeneous behavior in agreement with the structural study. Regarding the solvent dynamics, deep in the glassy state all data can be described by an Arrhenius temperature dependence with a rather similar activation energy. However, the values of the characteristic times are about three orders of magnitude smaller for THF than for water. Water dynamics display a crossover toward increasingly higher apparent activation energies in the region of the onset of the glass transition, supporting its interpretation as a consequence of the freezing of the structural relaxation of the surrounding matrix. The absence of such a crossover (at least in the wide dynamic window here accessed) in THF is attributed to the lack of cooperativity effects in the relaxation of these molecules within the polymeric matrix., Financial support from the Projects Nos. MAT2012-31088 and MAT2015-63704-P (Spanish-MINECO and EU) and IT-654-13 (Basque Government) is acknowledged. This work is based on experiments performed at SANS-2 (SINQ, Paul Scherrer Institute, Villigen, Switzerland), and DNS-instrument JNSE (Heinz Maier-Leibnitz Zentrum (MLZ), Garching, Germany) and has been supported by the European Commission under the 7th Framework Programme through the “Research Infrastructures” action of the “Capacities” Programme, NMI3-II Grant No. 283883., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of double crystalline cyclic diblock copolymers of poly(ε-caprolactone) and poly(l(d)-lactide) (c(PCL-b- PL(D)LA))

  • Liénard, Romain
  • Zaldua, Nerea
  • Josse, Thomas
  • De Winter, Julien
  • Zubitur, Manuela
  • Múgica, Agurtzane
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Coulembier, Olivier
  • Müller, Alejandro J.
The synthesis of symmetric cyclo poly(ε-caprolactone)–block–poly(l(d)-lactide) (c(PCL–b–PL(D)LA)) by combining ring-opening polymerization of ε-caprolactone and lactides and subsequent click chemistry reaction of the linear precursors containing antagonist functionalities is presented. The two blocks can sequentially crystallize and self-assemble into double crystalline spherulitic superstructures. The cyclic chain topology significantly affects both the nucleation and the crystallization of each constituent, as gathered from a comparison of the behavior of linear precursors and cyclic block copolymers. The stereochemistry of the PLA block does not have a significant effect on the nonisothermal crystallization of both linear and cyclo PCL-b-PDLA and PCL-b-PLLA copolymers., The authors acknowledge funding by the following projects: MAT2014-53437-C2-P and MAT2015-63704-P (Spanish MINECO); IT-654-13 (Basque Government), the Science Policy Office of the Belgian Federal Government (PAI 7/5), and the Belgian FRFC-FNRS (No. 2.4508.12). O.C. is Research Associate of the F.R.S.-FNRS. N.Z. acknowledges the fellowship from the UPV/EHU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of PLLA-g-montmorillonite nanohybrids in the acceleration of the crystallization rate of a commercial PLA

  • Zaldua, Nerea
  • Múgica, Agurtzane
  • Zubitur, Manuela
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Lo Re, Giada
  • Raquez, Jean-Marie
  • Dubois, Philippe
  • Müller, Alejandro J.
Employing the hydroxyl groups on the surface of Cloisite® 30B montmorillonite (Cl30B), the ring-opening polymerization of L-lactide was performed with a metal-free catalyst to yield a PLLA-g-Cl30B nanohybrid with low Mn grafted PLLA chains (i.e., 9 kg mol−1). This nanohybrid was then melt mixed with PLA 4032D from NatureWorks, which is a slow-crystallizing PLA as it contains 2% D-isomers and has a high Mn value (i.e., 123 kg mol−1). The samples were characterized by TEM, WAXS, SAXS, DSC and Polarized Light Optical Microscopy (PLOM) in order to study their crystallization kinetics in depth. The dispersion of the nanoclay was excellent and much better in the PLA/PLLA-g-Cl30B nanocomposites in comparison to PLA/Cl30B blends prepared as reference. In order to ascertain the role of the nanoclay, analogue PLA/PLLA blends without Cl30B were also prepared. The spherulitic crystallization kinetics from the melt was determined for all samples. The growth rate of neat PLA was accelerated approximately 3 times by incorporating the PLLA-g-Cl30B nanohybrid with an inorganic content of 5%. The overall crystallization kinetics from the glassy state of PLA was also accelerated in a similar way by the nanohybrid addition. Nevertheless, the PLA/PLLA blends crystallized even faster indicating that the dominant effect that causes the acceleration of the crystallization of PLA is the plasticization of PLA by the low Mn PLLA molecules. The changes in Tg of PLA also support this explanation. In the case of the PLA/PLLA-g-Cl30B nanocomposites, even though the plasticizing effect of the PLLA chains still dominates, their action is counterbalanced by their tethering on one end, as they are grafted to the surface of the exfoliated clay nanoplatelets., The POLYMAT-UPV/EHU team would like to acknowledge funding from the following projects: UPV/EHU (UFI 11/56); GIC IT-586-13 (Basque Government); UPV/EHU Infrastructure: INF 14/38; Mineco/FEDER: SINF 130I001726XV1/Ref: UNPV13–4E–1726; Mineco MAT2014-53437-C2-P. Nerea Zaldua acknowledges the fellowship from the University of Basque Country UPV/EHU. A. A. and A. I. acknowledge financial support from the Spanish Ministry ‘Ministerio de Economia y Competitividad’, code: MAT2015-63704-P (MINECO/FEDER, UE) and the Basque Government, code: IT-654-13., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable slow dynamics in a new class of soft colloids

  • Lo Verso, Federica
  • Pomposo, José A.
  • Colmenero de León, Juan
  • Moreno Segurado, Ángel J.
By means of extensive simulations, we investigate concentrated solutions of globular single-chain nanoparticles (SCNPs), an emergent class of synthetic soft nano-objects. By increasing the concentration, the SCNPs show flattening, and even reentrant behaviour, in the density dependence of their structural and dynamic correlations, as well as a soft caging regime and weak dynamic heterogeneity. The latter is confirmed by validation of the Stokes–Einstein relation up to concentrations far beyond the overlap density. Therefore SCNPs arise as a new class of soft colloids, exhibiting slow dynamics and actualizing in a real system the structural and dynamic anomalies proposed by models of ultrasoft particles. Quantitative differences in the dynamic behaviour depend on the SCNP deformability, which can be tuned through the degree of internal cross-linking., We acknowledge financial support from the projects MAT2015-63704-P and IT-654-13 (Spain)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Cooling Rate Dependent Glass Transition in Thin Polymer Films and in Bulk

  • Cangialosi, Daniele
  • Alegría, Ángel
  • Colmenero de León, Juan
The glass transition is a well-known phenomenon marking the crossover from a liquid in metastable equilibrium to an out-of-equilibrium glass. In this chapter employing fast scanning calorimetry (FSC), we investigate the glass transition of bulk polystyrene (PS) and the corresponding films spin-coated on silicon oxide with thickness as low as ~ 10 nm. To do so, we employ a procedure based on determining the glass transition temperature (T g ) as that where non-equilibrium effects begin to be calorimetrically detectable. This provides a measure of the onset of the glass transition, that is the T g(on). This method allows obtaining the T g(on) in a wide range of cooling rates and with a precision generally not achievable by means of conventional methods. The main results of the study are that: (1) the cooling rate dependent T g(on) follows the Vogel–Fulcher–Tammann law for all thicknesses; (2) T g(on) decrease from bulk behaviour is observed for the smallest employed thickness (~ 10 nm). For the investigated film configuration (supported on silicon oxide), the decrease in T g(on) becomes progressively large as the cooling rate is decreased. In particular, at the highest investigated cooling rates (~ 1000 K/s) a decrease of several Kelvin is observed, whereas the T g(on) is depressed by ~ 15 K at a cooling rate of 0.1 K/s. This result is discussed in relation to the thickness dependence of the rate of spontaneous fluctuations in PS. This appears to be thickness independent for films configuration analogous to that of the present study. Hence, it is unequivocally shown how relaxational arguments, that is, those based on the effect of the rate of spontaneous fluctuations on the thermal glass transition, are insufficient to catch the T g(on) decrease from bulk behaviour., The authors acknowledge the University of the Basque Country and Basque Country Government (Ref. No. IT-654-13 (GV)), Depto. Educación, Universidades e Investigación and Spanish Government (Grant No. MAT2012-31088 and MAT2015-63704-P) for their financial support., Peer reviewed