Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 43
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Multifunctional Ionic Polymers from Deep Eutectic Monomers Based on Polyphenols

  • López de Lacalle Zabaleta, Jon
  • Gallastegui, Antonela
  • Olmedo Martínez, Jorge L.
  • Moya, Melissa
  • López Larrea, Naroa
  • Picchio, Matías L.
  • Mecerreyes Molero, David
Herein we report a novel family of deep eutectic monomers and the corresponding polymers, made of (meth)acrylic ammonium salts and a series of biobased polyphenols bearing catechol or pyrogallol motifs. Phenolic chemistry allows modulating molecular interactions by tuning the ionic polymer properties from soft adhesive to tough materials. For instance, pyrogallol and hydrocaffeic acid-derived ionic polymers showed outstanding adhesiveness (>1 MPa), while tannic acid/gallic acid polymers with dense hydrogen bond distribution afforded ultratough elastomers (stretchability ≈1000% and strength ≈3 MPa). Additionally, phenolic polymeric deep eutectic solvents (polyDES) featured metal complexation ability, antibacterial properties, and fast processability by digital light 3D printing., This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under grant agreement no. 823989 “IONBIKE”. The financial support from CONICET and ANPCyT (PICT 2018-01032) (Argentina) is also gratefully acknowledged.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Direct Ink Writing of PEDOT Eutectogels as Substrate-free Dry Electrodes for Electromyography

  • Aguzin, Ana
  • Domínguez Alfaro, Antonio
  • Criado González, Miryam
  • Velasco Bosom, Santiago
  • Picchio, Matías L.
  • Casado Pérez, Nerea
  • Mitoudi Vagourdi, Eleni
  • Minari, Roque Javier
  • Malliaras, George G.
  • Mecerreyes Molero, David
Deep Eutectic Solvents (DES) are a new class of ionic conductive compounds attracting significant attention as greener alternatives to costly ionic liquids. Herein, we developed novel mixed ionic-electronic conducting materials by simple mixing of poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS) and various DES as additives. The DES addition induces the supramolecular assembly and gelification of PEDOT:PSS triggered by extensive hydrogen bonding and charge stabilization. The DES gels also known as eutectogels feature boost the mixed ionic-electronic conductivity of PEDOT:PSS up to 368 S·cm-1, unveiling great potential as flexible bioelectronics. All the PEDOT:PSS/DES gels showed shear-thinning behavior and viscosity values ranging from 100 to 1000 Pa·s. The eutectogels show good injectability with almost instantaneous elastic recovery, making them ideal materials for direct ink writing (DIW). As proof of that, PEDOT:PSS/DES (choline chloride: lactic acid) was 3D printed in different patterns, annealed at high temperature, and assembled into adhesive electrodes. This way tattoos-like electrodes, denoted as Eutecta2 were fabricated and placed in-vivo on the forearm and the thumb of human volunteers for electromyography measurements. Eutecta2 hexagonal patterns showed excellent conformability, and their signal-to-noise ratio (SNR) was higher than Ag/AgCl commercial electrodes for thumb motion measurements. Furthermore, forearm motion was measured after 14 days with similar values of SNR, demonstrating long-term stability and reusability. All in all, our findings revealed that DES could be used as inexpensive and safe additives to direct the self-assembly of PEDOT: PSS into supramolecular eutectogels inks for flexible bioelectronics., This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under grant agreement no. 823989 ‘‘IONBIKE’’ and AEI-MINECO for project PID2020-119026GB-I00. The financial support received from CONICET and ANPCyT (Argentina) is also gratefully acknowledged. Nerea Casado would like to thank the University of the Basque Country (No. 823989) for funding through a specialization of research staff fellowship (ESPDOC 19/99). Santiago Velasco-Bosom acknowledges the support from W.D Armstrong Studentship. Antonio Dominguez-Alfaro acknowledges UPV/EHU for funding transferred by the European Union-Next Generation EU by the Margarita Salas fellowship. (MARSA Nº agreement 22/77). Eleni Mitoudi Vagourdi would like to acknowledge the Swedish Chemical Society.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Eutectogels as a Semisolid Electrolyte for Organic Electrochemical Transistors

  • Zhong, Yizhou
  • López Larrea, Naroa
  • Álvarez Tirado, Marta
  • Casado Pérez, Nerea
  • Koklu, Anil
  • Marks, Adam
  • Moser, Maximilian
  • McCulloch, Iain
  • Mecerreyes Molero, David
  • Inal, Sahika
Organic electrochemical transistors (OECTs) are signal transducers offering high amplification, which makes them particularly advantageous for detecting weak biological signals. While OECTs typically operate with aqueous electrolytes, those employing solid-like gels as the dielectric layer can be excellent candidates for constructing wearable electrophysiology probes. Despite their potential, the impact of the gel electrolyte type and composition on the operation of the OECT and the associated device design considerations for optimal performance with a chosen electrolyte have remained ambiguous. In this work, we investigate the influence of three types of gel electrolytes─hydrogels, eutectogels, and iongels, each with varying compositions on the performance of OECTs. Our findings highlight the superiority of the eutectogel electrolyte, which comprises poly(glycerol 1,3-diglycerolate diacrylate) as the polymer matrix and choline chloride in combination with 1,3-propanediol deep eutectic solvent as the ionic component. This eutectogel electrolyte outperforms hydrogel and iongel counterparts of equivalent dimensions, yielding the most favorable transient and steady-state performance for both p-type depletion and p-type/n-type enhancement mode transistors gated with silver/silver chloride (Ag/AgCl). Furthermore, the eutectogel-integrated enhancement mode OECTs exhibit exceptional operational stability, reflected in the absence of signal-to-noise ratio (SNR) variation in the simulated electrocardiogram (ECG) recordings conducted continuously over a period of 5 h, as well as daily measurements spanning 30 days. Eutectogel-based OECTs also exhibit higher ECG signal amplitudes and SNR than their counterparts, utilizing the commercially available hydrogel, which is the most common electrolyte for cutaneous electrodes. These findings underscore the potential of eutectogels as a semisolid electrolyte for OECTs, particularly in applications demanding robust and prolonged physiological signal monitoring., This publication was based upon work supported by the King Abdullah University of Science and Technology Research Funding (KRF) under Award No. ORA-2021-CRG10-4650, and funding from CCF/1976-33-01. The authors acknowledge funding from Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under grant agreement No. 823989 “IONBIKE”.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

3D Printable Conducting and Biocompatible PEDOT-graft-PLA Copolymers by Direct Ink Writing

  • Domínguez Alfaro, Antonio
  • Gabirondo Amenabar, Elena
  • Alegret Ramón, Nuria
  • De León Almazán, Claudia María
  • Hernández Aguirresarobe, Roberto
  • Vallejo Illaramendi, Ainara
  • Prato, Maurizio
  • Mecerreyes Molero, David
Tailor-made polymers are needed to fully exploit the possibilities of additive manufacturing, constructing complex and functional devices in areas such as bioelectronics. In this article, we show the synthesis of a conducting and biocompatible graft copolymer which can be 3D printed using direct melting extrusion methods. For this purpose, graft copolymers composed by conducting polymer poly(3,4-ethylenedioxythiophene) PEDOT and a biocompatible polymer polylactide (PLA) were designed. The PEDOT-g-PLA copolymers were synthesized by chemical oxidative polymerization between 3,4-ethylenedioxythiophene and PLA macromonomers. PEDOT-g-PLA copolymers with different compositions were obtained and fully characterized. The rheological characterization indicated that copolymers containing bellow 20wt% of PEDOT showed the right complex viscosity values suitable for Direct Ink Writing. The 3D printing tests using the direct ink writing (DIW) methodology allowed to print different parts with different shapes with high resolution (200 μm). The conductive and biocompatible printed patterns of PEDOT-g-PLA showed excellent cell growth and maturation of neonatal cardiac myocytes co-cultured with fibroblasts., This work was supported by funding from Health Institute Carlos III (ISCIII) funds and by Marie Sklowdowska-Curie Research and Innovation Staff Exchanges (RISE) under the grant agreement N0 823989.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Aging Effect of Catechol Redox Polymer Nanoparticles for Hybrid Supercapacitors

  • Gallastegui, Antonela
  • Camara, Ousmane
  • Minudri, Daniela
  • Goujon, Nicolas
  • Patil, Nagaraj
  • Ruipérez Cillán, Fernando
  • Marcilla, Rebeca
  • Mecerreyes Molero, David
[EN] Redox-polymer nanoparticles are a promising solution to avoid the detrimental dissolution of organic electrode materials while showing discrete redox processes. In this work, catechol-based redox-active polymer nanoparticles (cRPNs) were synthesized through one-step emulsion polymerization with a tunable size from 25 to 150 nm. The fresh cRPNs were characterized and showed a reversible redox process centered at 0.50 V (vs. Ag/AgCl) in 1 M H2SO4. Unexpectedly, the cRPN latex aged after days passing from white to pink. This aging resulted in a shift of its redox potential toward higher values, which could be associated to autoxidation of the catechol groups and subsequent crosslinking of NPs due to catechol dimer formation. Finally, we compared the performance of fresh and aged cRPNs in a hybrid supercapacitor device, proving how the aging effect had some benefits such as an increase in the voltage output, specific capacitance, cyclability and Coulombic efficiencies of the device., The authors thank for technical and human support provided by IZO-SGI SGIker of UPV/EHU. Technical and human support provided by IZO-SGI, SGIker (UPV/EHU, MICINN, GV/EJ, ERDF and ESF) is gratefully acknowledged for assistance and generous allocation of computational resources. The authors would like to thank the European Commission for financial support through funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 823989. N.P. appreciates Spanish MINECO for the Juan de la Cierva-formation fellowship (FJC2018-037781-I). R.M. thanks the Spanish Ministry of Science, Innovation and Universities through the SUSBAT project (Ref.RTI2018-101049-B-I00) (MINECO/FEDER, UE) for financial support.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Digital Light 3D Printing of PEDOT-Based Photopolymerizable Inks for Biosensing

  • López Larrea, Naroa
  • Criado González, Miryam
  • Domínguez Alfaro, Antonio
  • Alegret Ramón, Nuria
  • Del Agua López, Isabel
  • Marchiori, Bastien
  • Mecerreyes Molero, David
3D conductive materials such as polymers and hydrogels that interface between biology and electronics are actively being researched for the fabrication of bioelectronic devices. In this work, short-time (5 s) photopolymerizable conductive inks based on poly(3,4-ethylenedioxythiophene) (PEDOT):polystyrene sulfonate (PSS) dispersed in an aqueous matrix formed by a vinyl resin, poly(ethylene glycol) diacrylate (PEGDA) with different molecular weights (M-n = 250, 575, and 700 Da), ethylene glycol (EG), and a photoinitiator have been optimized. These inks can be processed by Digital Light 3D Printing (DLP) leading to flexible and shape-defined conductive hydrogels and dry conductive PEDOTs, whose printability resolution increases with PEGDA molecular weight. Besides, the printed conductive PEDOT-based hydrogels are able to swell in water, exhibiting soft mechanical properties (Young's modulus of similar to 3 MPa) similar to those of skin tissues and good conductivity values (10(-2) S cm(-1)) for biosensing. Finally, the printed conductive hydrogels were tested as bioelectrodes for human electrocardiography (ECG) and electromyography (EMG) recordings, showing a long-term activity, up to 2 weeks, and enhanced detection signals compared to commercial Ag/AgCl medical electrodes for health monitoring., This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under grant agreement No. 823989 “IONBIKE”.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

High Density Body Surface Potential Mapping with Conducting Polymer-Eutectogel Electrode Arrays for ECG imaging

  • Ruiz-Mateos Serrano, Ruben
  • Velasco Bosom, Santiago
  • Domínguez Alfaro, Antonio
  • Picchio, Matías L.
  • Mantione, Daniele
  • Mecerreyes Molero, David
  • Malliaras, George G.
Electrocardiography imaging (ECGi) is a non-invasive inverse reconstruction procedure which employs body surface potential maps (BSPM) obtained from surface electrode array measurements to improve the spatial resolution and interpretability of conventional electrocardiography (ECG) for the diagnosis of cardiac dysfunction. ECGi currently lacks precision, which has prevented its adoption in clinical setups. The introduction of high-density electrode arrays could increase ECGi reconstruction accuracy but is not attempted before due to manufacturing and processing limitations. Advances in multiple fields have now enabled the implementation of such arrays which poses questions on optimal array design parameters for ECGi. In this work, a novel conducting polymer electrode manufacturing process on flexible substrates is proposed to achieve high-density, mm-sized, conformable, long-term, and easily attachable electrode arrays for BSPM with parameters optimally selected for ECGi applications. Temporal, spectral, and correlation analysis are performed on a prototype array demonstrating the validity of the chosen parameters and the feasibility of high-density BSPM, paving the way for ECGi devices fit for clinical application., This work was supported by the EPSRC grant [EP/S022139/1] and the Marie Sklodowska-Curie Research and Innivation Staff Exchanges (RISE) under grant agreement no. 823989 "IONBIKE". D.M. thanks Ayuda RYC2021-031668-I financed by MCIN/AEI /10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. A. Dominguez-Alfaro acknowledges UPV/EHU for funding transferred by the European Union-Next Generation EU by the Margarita Salas fellowship (MARSA no. agreement 22/77).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Light-Based 3D Multi-Material Printing of Micro-Structured Bio-Shaped, Conducting and Dry Adhesive Electrodes for Bioelectronics

  • Domínguez Alfaro, Antonio
  • Mitoudi Vagourdi, Eleni
  • Dimov, Ivan
  • Picchio, Matías L.
  • López Larrea, Naroa
  • López de Lacalle Zabaleta, Jon
  • Tao, Xudong
  • Ruiz-Mateos Serrano, Ruben
  • Gallastegui, Antonela
  • Vassardanis, Nikolaos
  • Mecerreyes Molero, David
  • Malliaras, George G.
In this work, a new method of multi-material printing in one-go using a commercially available 3D printer is presented. The approach is simple and versatile, allowing the manufacturing of multi-material layered or multi-material printing in the same layer. To the best of the knowledge, it is the first time that 3D printed Poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) micro-patterns combining different materials are reported, overcoming mechanical stability issues. Moreover, the conducting ink is engineered to obtain stable in-time materials while retaining sub-100 µm resolution. Micro-structured bio-shaped protuberances are designed and 3D printed as electrodes for electrophysiology. Moreover, these microstructures are combined with polymerizable deep eutectic solvents (polyDES) as functional additives, gaining adhesion and ionic conductivity. As a result of the novel electrodes, low skin impedance values showed suitable performance for electromyography recording on the forearm. Finally, this concluded that the use of polyDES conferred stability over time, allowing the usability of the electrode 90 days after fabrication without losing its performance. All in all, this demonstrated a very easy-to-make procedure that allows printing PEDOT:PSS on soft, hard, and/or flexible functional substrates, opening up a new paradigm in the manufacturing of conducting multi-functional materials for the field of bioelectronics and wearables., This work was supported by the Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under grant agreement no. 823989 “‘IONBIKE”’ and the AEI-MINECO for project PID2020-119026GB-I00. Antonio Dominguez-Alfaro acknowledges UPV/EHU for funding transferred by the European Union-Next Generation EU by the Margarita Salas fellowship. (MARSA N agreement 22/77). Eleni Mitoudi Vagourdi would like to acknowledge the Swedish Chemical Society. The authors thank Dr. Miguel H. Boratto for his help in the resistivity acquisition.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Polyphenol Iongel Patches with Antimicrobial, Antioxidant and Anti-Inflammatory Properties

  • Luque, Gisela C.
  • Moya, Melissa
  • Picchio, Matías L.
  • Bagnarello, Vanessa
  • Valerio, Idalia
  • Bolaños, José
  • Vethencourt, María
  • Gamboa, Sue-Hellen
  • Tomé, Liliana C.
  • Minari, Roque Javier
  • Mecerreyes Molero, David
There is an actual need for developing materials for wound healing applications with anti-inflammatory, antioxidant, or antibacterial properties in order to improve the healing performance. In this work, we report the preparation and characterization of soft and bioactive iongel materials for patches, based on polymeric poly(vinyl alcohol) (PVA) and four ionic liquids containing the cholinium cation and different phenolic acid anions, namely cholinium salicylate ([Ch][Sal]), cholinium gallate ([Ch][Ga]), cholinium vanillate ([Ch][Van]), and cholinium caffeate ([Ch][Caff]). Within the iongels, the phenolic motif in the ionic liquids plays a dual role, acting as a PVA crosslinker and a bioactive compound. The obtained iongels are flexible, elastic, ionic conducting, and thermoreversible materials. Moreover, the iongels demonstrated high biocompatibility, non-hemolytic activity, and non-agglutination in mice blood, which are key-sought material specifications in wound healing applications. All the iongels have shown antibacterial properties, being PVA-[Ch][Sal], the one with higher inhibition halo for Escherichia Coli. The iongels also revealed high values of antioxidant activity due to the presence of the polyphenol, with the PVA-[Ch][Van] iongel having the highest activity. Finally, the iongels show a decrease in NO production in LPS-stimulated macrophages, with the PVA-[Ch][Sal] iongel displaying the best anti-inflammatory activity (>63% at 200 µg/mL)., This work was funding by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under the grant agreement No 823989 “IONBIKE”, CONICET (PIP 11220200101353CO), ANPCyT (PICT-2020-03156), and the National University of the Litoral (C.A.I. + D 50620190100117LI), and Fundação para a Ciência e a Tecnologia (2020.01555.CEECIND, UIDB/50006/2020 and UIDP/50006/2020).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Elastomeric protein bioactive eutectogels for topical drug delivery

  • Picchio, Matías L.
  • Orellano, María Soledad
  • Motta, María Ángela
  • Huck-Iriart, Cristián
  • Sánchez de Alcázar Melendo, Daniel
  • López Domene, Rocío
  • Martín García, Beatriz
  • Larrañaga Espartero, Aitor
  • Beloqui Elizazu, Ana
  • Mecerreyes Molero, David
  • Calderón, Marcelo
Therapeutic deep eutectic solvents (THEDES) are an emerging family of eutectic mixtures gaining increasing interest in the biomedical space. The immobilization of THEDES into polymer networks allows bioactive eutectogels to expand their application scope to topical drug delivery. Herein, this work presents the first set of elastomeric eutectogels constructed by supporting a therapeutic eutectic system with skin permeation ability in a protein scaffold dynamically crosslinked by a natural polyphenol. In this ionic eutectic, gelatin undergoes gelation through an unexpected mechanism in striking contrast with classical hydrogels, which is herein thoroughly studied. Interestingly, the polyphenol controls the conformation of the protein structure, enabling tuning up the mechanical and viscoelastic behavior of the dynamic eutectogel networks from elastic to hyperelastic. The resultant protein eutectogels exhibit strain-hardening behavior, thermoreversible gel-to-sol transition, and excellent adhesive performance. Furthermore, these versatile materials retain the bioactivity of the liquid THEDES and favor skin occlusion, assisting the delivery of both hydrophilic and hydrophobic substances in ex vivo porcine skin in a time-dependent penetration process. These ultrastretchable eutectogels show new interplays between protein scaffolds and eutectic mixtures, paving the way for innovative therapeutic soft materials., M.L.P. and M.S.O. contributed equally to this work. M.C. is thankful for funding from the Basque Health Department (projects 2022333035, 2022333039, and 2022333031), the University of the Basque Country (projects COLLAB22/05 and GIU21/033), and IKERBASQUE-Basque Foundation for Science. MLP has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement n°. 101028881. M.S.O. is thankful for the funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 896775. A.L. and M.A.M. are thankful for funds from the Basque Government, Department of Education (IT-1766-22). A.B. gratefully acknowledges the financial support from the Spanish Research Agency (AEI) for the financial support (RYC2018-025923-I from RyC program – MCIN/ AEI /10.13039/501100011033 and FSE “invierte en tu futuro”). D.M. gratefully acknowledges the financial support from the Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) program under grant agreement No 823989 “IONBIKE.” SAXS measurements were done at NCD-SWEET beamline, ALBA synchrotron, Spain, project number 2023027439.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Tuning Electronic and Ionic Conductivities in Composite Materials for Electrochemical Devices

  • Casado Pérez, Nerea
  • Zendegi Zelaia, Sara
  • Del Olmo Martínez, Rafael
  • Domínguez Alfaro, Antonio
  • Forsyth, Maria
Unformatted postprint, Mixed conductors having both high ionic and electronic conductivity are needed in membrane electrode assemblies (MEA) present in electrochemical devices from fuel cells, to supercapacitors and all battery chemistries. Typically, carbon black, binders and redox active materials are combined to make an electrode assembly into which a liquid electrolyte can 2 impregnate. Solid state devices require the ionic conduction built into the MEA. In this case, a material which can provide both electronic and ionic conduction as well as a redox functionality is described based on PEDOT-Cl as both the electronic conductor and the redox active component whilst an organic ionic plastic crystal [C2mpyr][FSI] is present as both binder and ionic conductor. Surprisingly, both the electronic and ionic conductivity of the composite are enhanced relative to the pure components by a factor of ×9 for electronic and ×180 for ionic. The mixed conducting composites are demonstrated to retain their redox activity in aqueous electrolytes, and, in the optimum case, 103 F g-1 and 296 mF cm-2 capacitance values are obtained for low and high mass loading electrodes. These materials demonstrate an innovative approach to prepare electrode assemblies where all three functionalities are incorporated into the materials. ie. electronic, ionic and redox activity for future energy devices., This work was supported by an Ikerbasque Research Fellowship from the Basque Government and the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 823989. NC would like to thank the University of the Basque Country for funding through a specialization of research staff fellowship (ESPDOC 19/99).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

PNIPAM/PEDOT:PSS Hydrogels for Multifunctional Organic Electrochemical Transistors

  • López Larrea, Naroa
  • Wustoni, Shofarul
  • Peñas Núñez, Mario Iván
  • Uribe, Johana
  • Domínguez Alfaro, Antonio
  • Gallastegui, Antonela
  • Inal, Sahika
  • Mecerreyes Molero, David
The development of multifunctional organic materials represents a vibrant area of research, with applications spanning from biosensing to drug delivery. This study shows the development of a multifunctional bioelectronic device suitable for prolonged temperature monitoring and drug delivery applications. The device relies on a conducting and thermo-responsive hydrogel made of poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) (PEDOT:PSS) and poly(N-isopropylacrylamide) (PNIPAM). This multifunctional hydrogel is 4D printable by Digital Light Processing (DLP) method and exhibits optimal biocompatibility. The hydrogel features a low critical solution temperature (LCST) ≈35 °C, above which its resistance changes dramatically due to the shrinkage it undergoes with temperature. The integration of PNIPAM/PEDOT hydrogel into an organic electrochemical transistor (OECT) as the gate electrode allows to generate a miniaturized bioelectronic device with a reversible response to temperature variations between 25 to 45 °C, along with high sensitivity of 0.05 °C−1. Furthermore, the PNIPAM/PEDOT hydrogel demonstrates its utility in drug delivery, achieving an Insulin-FITC release rate of 82 ± 4% at 37 °C, mimicking human body conditions. The hydrogel's functionality to store and release the insulin does not compromise its thermo-responsivity and the overall performance of the OECT. This multifunctional OECT opens new avenues for the development of customizable and personalized sensing and drug-delivery systems., This work was supported by the Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under grant agreement No. 823989 “IONBIKE”. Naroa Lopez-Larrea gratefully acknowledges the support from the Spanish Ministry of Universities (FPU20/03416).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Natural Deep Eutectic Solvents Based on Choline Chloride and Phenolic Compounds as Efficient Bioadhesives and Corrosion Protectors

  • Picchio, Matías L.
  • Minudri, Daniela
  • Mantione, Daniele
  • Criado González, Miryam
  • Guzmán González, Gregorio
  • Schmarsow, Ruth
  • Müller Sánchez, Alejandro Jesús
  • Tomé, Liliana C.
  • Minari, Roque Javier
  • Mecerreyes Molero, David
[EN] Natural deep eutectics solvents (NADES), owing to their high solvation capacity and nontoxicity, are actively being sought for many technological applications. Herein, we report a series of novel NADES based on choline chloride and plant-derived polyphenols. Most of the obtained phenolic NADES have a wide liquid range and high thermal stability above 150 degrees C. Among them, small-sized polyphenols, like pyrogallol, vanillyl alcohol, or gentisic acid, lead to low-viscosity liquids with ionic conductivities in the order of 10(-3) S cm(-1) at room temperature. Interestingly, polyphenols possess valuable properties as therapeutic agents, antioxidants, adhesives, or redox-active compounds, among others. Thus, we evaluated the potential of these novel NADES for two applications: bioadhesives and corrosion protection. The mixture of choline chloridevanillyl alcohol (2:3 mol ratio) and gelatin resulted in a highly adhesive viscoelastic liquid (adhesive stress approximate to 135 kPa), affording shear thinning behavior. Furthermore, choline chloride-tannic acid (20:1) showed an extraordinary ability to coordinate iron ions, reaching excellent corrosion inhibitive efficiencies in mild steel protection., This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under Grant Agreement No. 823989 "IONBIKE". The financial supports received from CONICET and ANPCyT (Argentina) are also gratefully acknowledged. Liliana C. Tome is grateful to Fundacao para a Ciencia e a Tecnologia (FCT/MCTES) in Portugal for her assistant researcher contract under the Scientific Employment Stimulus (2020.01555.CEECIND). The Associate Laboratory for Green Chemistry - LAQV also acknowledges the financial support from FCT/MCTES (UIDB/50006/2020 and UIDP/50006/2020).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Mixed Ionic and Electronic Conducting Eutectogels for 3D-Printable Wearable Sensors and Bioelectrodes

  • Picchio, Matías L.
  • Gallastegui, Antonela
  • Casado Pérez, Nerea
  • López Larrea, Naroa
  • Marchiori, Bastien
  • Del Agua López, Isabel
  • Criado González, Miryam
  • Mantione, Daniele
  • Minari, Roque Javier
  • Mecerreyes Molero, David
Eutectogels are a new class of soft ion conductive materials that are attracting attention as an alternative to conventional hydrogels and costly ionic liquid gels to build wearable sensors and bioelectrodes. Herein, the first example of mixed ionic and electronic conductive eutectogels showing high adhesion, flexibility, nonvolatility, and reversible low-temperature gel transition for 3D printing manufacturing is reporting. The eutectogels consist of choline chloride/glycerol deep eutectic solvent, poly(3,4-ethylenedioxythiophene): lignin sulfonate, and gelatin as the biocompatible polymer matrix. These soft materials are flexible and stretchable, show high ionic and electronic conductivities of 7.3 and 8.7 mS cm−1, respectively, and have high adhesion energy. Due to this unique combination of properties, they could be applied as strain sensors to precisely detect physical movements. Furthermore, these soft mixed ionic electronic conductors possess excellent capacity as conformal electrodes to record epidermal physiological signals, such as electrocardiograms and electromyograms, over a long time., M.L.P. and A.G. contributed equally to this work. This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under the grant agreement No 823989 “IONBIKE.” The financial support received from CONICET and ANPCyT (Argentina) is also gratefully acknowledged. Thanks to the Flexible Electronic Department (FEL) of Ecole des Mines de Saint-Etienne (EMSE) for the combined mechanical/electrical characterization.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

High biobased content waterborne latexes stabilized with casein

  • Alassia, Mariana
  • Aguirre Arrese, Miren
  • Gugliotta, Luis M.
  • Minari, Roque Javier
  • Leiza Recondo, José Ramón
Growing environmental regulations are enforcing the synthesis of sustainable and ecofriendly materials. While waterborne processes, as emulsion polymerization, allow producing polymeric materials with low solvents emission, the reduction of their carbon footprint can be achieved by replacing petroleum-derived raw materials by biobased reagents. In this scenario, this work aims to synthesize high biobased content waterborne latexes by emulsion polymerization of two partially biobased commercial monomers (2-octyl acrylate, OA, and isobornyl methacrylate, IBOMA) in presence of previously methacrylated casein (bovine milk protein), which acts as a surfmer (i.e., an emulsifier capable of being radically polymerized). The kinetic study of the emulsion polymerization of OA and IBOMA allows optimizing the formulation, thus resulting that the incorporation of a low fraction of a more water soluble monomer is required to reach acceptable polymerization rates and high monomer conversion. The as-obtained films show promising performance in terms of their mechanical properties, resistance to solvents and biodegradability in organic compost, which could pave the way for the synthesis of high biobased (>75%) content binders for waterborne coatings., The authors acknowledge the financial support from the Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE, grant agreement no. 823989, “IONBIKE”), the Basque Government (GC-IT-999-16), and MINECO (CTQ2017-87841-R), the Argentinean Government (PIP 1122015 0100231-CO and PICT-2016-3876) and the Universidad Nacional del Litoral (C. A. I. + D 2020 50620190100117LI).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

One stone, many birds: Recent advances in functional nanogels for cancer nanotheranostics

  • Wang, Huiyi
  • Picchio, Matías L.
  • Calderón, Marcelo
Inspired by the development of nanomedicine and nanotechnology, more and more possibilities in cancer theranostic have been provided in the last few years. Emerging therapeutic modalities like starvation therapy, chemodynamic therapy, and tumor oxygenation have been integrated with diagnosis, giving a plethora of theranostic nanoagents. Among all of them, nanogels (NGs) show superiority benefiting from their unique attributes: high stability, high water-absorption, large specific surface area, mechanical strength, controlled responsiveness, and high encapsulation capacity. There have been a vast number of investigations supporting various NGs combining drug delivery and multiple bioimaging techniques, encompassing photothermal imaging, photoacoustic imaging, fluorescent imaging, ultrasound imaging, magnetic resonance imaging, and computed tomography. This review summarizes recent advances in functional NGs for theranostic nanomedicine and discusses the challenges and future perspectives of this fast-growing field. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease Nanotechnology Approaches to Biology > Nanoscale Systems in Biology Diagnostic Tools > In Vivo Nanodiagnostics and Imaging, China Scholarship Council, Grant/Award Number: 201804910606; Eusko Jaurlaritza, Grant/Award Numbers: KK-2019/00086, KK-2020/00010, PIBA_2020_1_0056; Ikerbasque, Basque Foundation for Science; Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) "IONBIKE", Grant/Award Number: 823989; Ministerio de Economía y Competitividad (MINECO), Grant/Award Number: RTI2018-098951-B-I00
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Ionic Hydrogel for Accelerated Dopamine Delivery via Retrodialysis

  • Proctor, Christopher M.
  • Chan, Chung Yuen
  • Porcarelli, Luca
  • Udabe Sánchez, Esther
  • Sánchez Sánchez, Ana
  • Del Agua López, Isabel
  • Mecerreyes Molero, David
  • Malliaras, George G.
Local drug delivery directly to the source of a given pathology using retrodialysis is a promising approach to treating otherwise untreatable diseases. As the primary material component in retrodialysis, the semipermeable membrane represents a critical point for innovation. This work presents a new ionic hydrogel based on polyethylene glycol and acrylate with dopamine counterions. The ionic hydrogel membrane is shown to be a promising material for controlled diffusive delivery of dopamine. The ionic nature of the membrane accelerates uptake of cationic species compared to a nonionic membrane of otherwise similar composition. It is demonstrated that the increased uptake of cations can be exploited to confer an accelerated transport of cationic species between reservoirs as is desired in retrodialysis applications. This effect is shown to enable nearly 10-fold increases in drug delivery rates from low concentration solutions. The processability of the membrane is found to allow for integration with microfabricated devices which will in turn accelerate adaptation into both existing and emerging device modalities. It is anticipated that a similar materials design approach may be broadly applied to a variety of cationic and anionic compounds for drug delivery applications ranging from neurological disorders to cancer., - EPSRC (EP/S009000/1) - Marie Sklodowska-Curie Grant Agreement No. 823989. - Borysiewicz Biomedical Sciences Fellowship program. - Marie SklodowskaCurie IF BIKE Project No. 742865.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Influence of Anion Structure on Thermal, Mechanical and CO2 Solubility Properties of UV-Cross-Linked Poly(ethylene glycol) Diacrylate Iongels

  • Martins, Ana P.S.
  • Fernández De Añastro Arrieta, Asier
  • Olmedo Martínez, Jorge L.
  • Nabais, Ana R.
  • Neves, Luísa A.
  • Mecerreyes Molero, David
  • Tomé, Liliana C.
Iongel-based CO2 separation membranes were prepared by fast (< 1 min) UV-initiated polymerization of poly(ethylene glycol) diacrylate (PEGDA) in the presence of different ionic liquids (ILs) with the [C2mim]+ cation and anions such as [TFSI]−, [FSI]−, [C(CN)3]− and [B(CN)4]−. The four ILs were completely miscible with the non-ionic PEGDA network. Transparent and free-standing iongels containing between 60 and 90 %wt of IL were obtained and characterized by diverse techniques (FTIR, TGA, DSC, DMTA, SEM, CO2 solubility and pure gas permeability). The thermal and mechanical stability of the iongels, as well as CO2 solubility, were found to be strictly dependent on the IL content and the anion’s nature. The TGA results indicated that the iongels mostly follow the thermal profile of the respective neat ILs. The DMTA analysis revealed that the iongels based on fluorinated anions have higher storage modulus than those of cyano-functionalized anions. Conversely, the PEGDA–C(CN)3 iongels presented the highest CO2 solubility values ranging from 72 to 80 mmol/g. Single CO2 permeabilities of 583 ± 29 Barrer and ideal CO2/N2 selectivities of 66 ± 3 were obtained with the PEGDA–70 C(CN)3 iongel membrane. This work demonstrates that the combination of PEGDA with high contents of the best performing ILs is a promising and simple strategy, opening up new possibilities in the design of high-performance iongel membranes for CO2 separation., This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under the grant agreement No 823989 “IONBIKE”, and by FCT (Fundação para Ciência e a Tecnologia) through the project PTDC/CTM-POL/2676/2014 and the Associate Laboratory for Green Chemistry - LAQV (UID/QUI/50006/2019). Liliana C. Tomé has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 745734. Jorge L. Olmedo Martínez wish to thank the National Council of Science and Technology (CONACYT) in México for his grant 471837. Ana R. Nabais and Luísa A. Neves are grateful to FCT/MCTES for their PhD grant (SFRH/BD/136963/2018) and FCT Investigador Contract (IF/00505/2014), respectively.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Cation Effect in the Corrosion Inhibition Properties of Coumarate Ionic Liquids and Acrylic UV-Coatings

  • Udabe Sánchez, Esther
  • Sommers, Anthony
  • Forsyth, Maria
  • Mecerreyes Molero, David
Chromate free corrosion inhibitors are searched for to mitigate the economic loss caused by mid-steel corrosion. Here, we show metal-free organic inhibitors having free coumarate anions that can be used either as direct corrosion inhibitors or incorporated into a polymer coating obtained by UV-curing. Four different ionic liquid monomers and polymer coatings with hexoxycoumarate anion and different polymerizable counter cations were investigated. Potentiodynamic polarization, electrochemical impedance spectroscopy, and surface analyses have verified their corrosion inhibition performance on a mild steel AS1020 surface. In the case of the coumarate ionic liquid monomers, the most promising inhibitor is the one coupled with the ammonium cation, showing an inhibition efficiency of 99.1% in solution followed by the imidazolium, pyridinium, and anilinium. Next, the ionic liquid monomers were covalently integrated into an acrylic polymer coating by UV-photopolymerization. In this case, the barrier effect of the polymer coating is combined with the corrosion inhibitor effect of the pendant coumarate anion. Here, the best polymer coatings are those containing 20% imidazolium and pyridinium cations, presenting a greater impedance in the EIS (Electrochemical Impedance Spectroscopy) measurements and less evidence of corrosion in the scribe tests. This article shows that the cationic moiety of coumarate based ionic liquids and poly(ionic liquid)s has a significant effect on their excellent corrosion inhibition properties for a mild steel surface exposed to aqueous chloride solutions., The authors would like to thank the European Commission for financial support through funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 823989. E.U. thanks the Spanish MINECO for a FPU fellowship. A.S. and M.F. are grateful for funding from the Australian Research Council through a Discovery Project, DP180101465.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Decoupled Ion Mobility in Nano-Confined Ionic Plastic Crystal

  • Zhu, Haijin
  • Grzelak, Aleksandra
  • Yunis, Ruhamah
  • Martín Pérez, Jaime
  • Forsyth, Maria
Nanoconfined ions have dramatically different local environments compared to the bulk, which profoundly affects the ion solvation and transport properties taking place in the confined space. Herein, we investigate the rotational and translation mobility of both cation and anions of an OIPC (diethyl)(methyl)(isobutyl)phosphonium hexafluorophosphate) confined in 40 and 180 nm straight-through Al2O3 pores. The results revealed that the nanoconfined OIPC exhibit 44 times higher ionic conductivity than the bulk material at 30 degrees C. This enhancement is attributed to both the reduced tortuosity and the increased population of mobile species. More interestingly, the Al2O3 nanochannels were found to selectively enhance the rotation and translational motion of [P-122i4] cation at elevated temperatures, whilst leaving that of the [PF6] anion less affected, M. F. thanks the Ikerbasque foundation for a visiting professorial fellowship. The authors acknowledge the Australian Research Council for funding through CE140100012. Deakin University's advanced characterisation facility is acknowledged for use of the NMR instruments, funded through the ARC grant LE110100141. J. M. thanks MCIU for the Ramon y Cajal contract and the grant Ref. PGC2018-094620-A-I00. Authors would like to thank the financial support provided by the IONBIKE RISE project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skodowska-Curie grant agreement No. 823989
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Emerging Ionic Soft Materials based on Deep Eutectic Solvents

  • Tomé, Liliana C.
  • Mecerreyes Molero, David
Postprint, In the last five years, the use of deep eutectic solvents (DES) have been opening new perspectives towards the creation of novel ionic soft materials as alternatives to expensive ionic liquids. This Mini-Review highlights the progress and advances in soft ionic materials or gels, mostly composed by a DES immobilized within difference matrices, such as linear polymers, polymer networks, biopolymers, supramolecular compounds or organosilane networks. By taking advantage of the DES characteristics and properties in the solid state, this building system delivers a variety of tailor-made materials showing different functionalities (ionic conductivity, self-healing, stretchability and pH-responsiveness) and offers a way to circumvent drawbacks related to shaping and risk of leakage in many technological applications. In this context, we provide a judicious analysis of these emerging ionic soft materials, their properties and applications open in energy, (bio)electronics, drug delivery, analytical chemistry, and wastewater treatment. Perspectives and opportunities for future research directions on this blossoming field are also discussed., Liliana C. Tomé has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 745734. This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) project under the grant agreement No 823989 “IONBIKE”.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico antes de ser publicado, versión del autor (Preprint)

Elastic and Thermoreversible Iongels by Supramolecular PVA/Phenol Interactions, Hyperelastic and Thermoreversible Iongels by Supramolecular PVA/Phenol Interactions

  • Luque, Gisela C.
  • Picchio, Matías L.
  • Martins, Ana P.S.
  • Domínguez Alfaro, Antonio
  • Tomé, Liliana C.
  • Mecerreyes Molero, David
  • Minari, Roque Javier
Unformatted preprint, Iongels have attracted much attention over the years as ion-conducting soft materials for applications in several technologies including stimuli-responsive drug release and flexible (bio)electronics. Nowadays, iongels with additional functionalities such as electronic conductivity, self-healing, thermo-responsiveness or biocompatibility are actively being searched for high demanding applications. In this work, we present a simple and rapid synthetic pathway to prepare hyperelastic and thermoreversible iongels. These iongels were prepared by supramolecular crosslinking between polyphenols biomolecules with a hydroxyl-rich biocompatible polymer such as poly(vinyl alcohol) (PVA) in the presence of ionic liquids. Using this strategy, a variety of iongels were obtained by combining different plant-derived polyphenol compounds such as gallic acid, pyrogallol, and tannic acid with imidazolium-based ionic liquids, namely [C2mim][N(CN)2] and [C2mim][Br]. A suite of characterization tools was used to study the structural, morphological, mechanical, rheological and thermal properties of the supramolecular iongels. These iongels can withstand large deformations (40 % under compression) with full recovery, revealing reversible transitions from solid to liquid state between 87 to 125 °C. Finally, the polyphenol-based thermoreversible iongels shows appropriated properties for their potential application as printable electrolytes for bioelectronics., This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under the grant agreement No 823989 “IONBIKE”. Also, the financial support received from CONICET, UNL, and ANPCyT (all of Argentina) is gratefully acknowledged. Liliana C. Tomé has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 745734.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Reducing Passive Drug Diffusion from Electrophoretic DrugDelivery Devices through Co-Ion Engineering

  • Chen, Shao-Tuan
  • Renny, Megan N.
  • Tomé, Liliana C.
  • Olmedo Martínez, Jorge L.
  • Udabe Sánchez, Esther
  • Jenkins, Elise P. W.
  • Mecerreyes Molero, David
  • Malliaras, George G.
  • McLeod, Robert R.
  • Proctor, Christopher M.
Implantable electrophoretic drug delivery devices have shown promise for applications ranging from treating pathologies such as epilepsy and cancer to regulating plant physiology. Upon applying a voltage, the devices electrophoretically transport charged drug molecules across an ion-conducting membrane out to the local implanted area. This solvent-flow-free "dry" delivery enables controlled drug release with minimal pressure increase at the outlet. However, a major challenge these devices face is limiting drug leakage in their idle state. Here, a method of reducing passive drug leakage through the choice of the drug co-ion is presented. By switching acetylcholine's associated co-ion from chloride to carboxylate co-ions as well as sulfopropyl acrylate-based polyanions, steady-state drug leakage rate is reduced up to sevenfold with minimal effect on the active drug delivery rate. Numerical simulations further illustrate the potential of this method and offer guidance for new material systems to suppress passive drug leakage in electrophoretic drug delivery devices., S.-T.C. and M.N.R. contributed equally to this work. S.-T.C. acknowledges funding from the Cambridge Trust and Ministry of Education, Taiwan. C.M.P. acknowledges funding from the University of Cambridge Borysiewicz Fellowship program as well as the Biotechnology and Biological Sciences Research Council David Phillips Fellowship. L.C.T. has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 745734. E.U. thanks the Spanish MINECO for her FPU fellowship, while JLOM acknowledges the National Council of Science and Technology (CONACYT) in Mexico for his grant 471837. This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) project under the grant agreement no. 823989 "IONBIKE." M.N.R. acknowledges support from the National Science Foundation grant NSF EMPD 1509909 and NSF Plant Genome Research Project, Special Initiatives grant 1935594. E.P.W.J. acknowledges funding by a Trinity Hall Research Studentship. The authors acknowledge funding from EPSRC (EP/S009000/1).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Polymorphism in Non-Fullerene Acceptors Based on Indacenodithienothiophene

  • Marina Barbier, Sara Luisa
  • Scaccabarozzi, Alberto D.
  • Gutiérrez Fernández, Edgar
  • Solano, Eduardo
  • Khirbat, Aditi
  • Ciammaruchi, Laura
  • Iturrospe Ibarra, Amaia
  • Balzer, Alex
  • Yu, Liyang
  • Gabirondo Amenabar, Elena
  • Monnier, Xavier
  • Sardon Muguruza, Haritz
  • Anthopoulos, Thomas D.
  • Caironi, Mario
  • Campoy Quiles, Mariano
  • Müller, Christian
  • Cangialosi, Daniele
  • Stingelin, Natalie
  • Martín Pérez, Jaime
Organic solar cells incorporating non-fullerene acceptors (NFAs) have reached remarkable power conversion efficiencies of over 18%. Unlike fullerene derivatives, NFAs tend to crystallize from solutions, resulting in bulk heterojunctions that include a crystalline acceptor phase. This must be considered in any morphology-function models. Here, it is confirmed that high-performing solution-processed indacenodithienothiophene-based NFAs, i.e., ITIC and its derivatives ITIC-M, ITIC-2F, and ITIC-Th, exhibit at least two crystalline forms. In addition to highly ordered polymorphs that form at high temperatures, NFAs arrange into a low-temperature metastable phase that is readily promoted via solution processing and leads to the highest device efficiencies. Intriguingly, the low-temperature forms seem to feature a continuous network that favors charge transport despite of a poorly order along the pi-pi stacking direction. As the optical absorption of the structurally more disordered low-temperature phase can surpass that of the more ordered polymorphs while displaying comparable-or even higher-charge transport properties, it is argued that such a packing structure is an important feature for reaching highest device efficiencies, thus, providing guidelines for future materials design and crystal engineering activities., This work was supported by the Ministerio de Ciencia e Innovacion/FEDER (under Ref. PGC2018-094620-A-I00 and PGC2018-095411-B-I00, CEX2019-000917-S, and PGC2018-095411-B-100) and the Basque Country Government (Ref. PIBA19-0051). S.M. is grateful to POLYMAT for the doctoral scholarship. The authors thank A. Arbe, A. Alonso-Mateo, and L. Hueso for their support and access to characterization tools. The authors also thank the technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). GIWAXS experiments were performed at BL11 NCD-SWEET beamline at ALBA Synchrotron (Spain) with the collaboration of ALBA staff. J.M and E.F.-G. acknowledge support through the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN 01-2018-2020 (FET-Open Challenging Current Thinking), "LION-HEARTED," Grant Agreement No. 828984. J.M and N.S. would like to thank the financial support provided by the IONBIKE RISE project, which received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skodowska-Curie Grant Agreement No. 823989. N.S., A.K., and A.B. furthermore are grateful to the U.S. National Science Foundation (NSF) for support via Project No. 1905901 within NSF's Division of Materials Research. A.S. and M.C. acknowledge financial support by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program "HEROIC," Grant Agreement No. 638059. This work was partially carried out at Polifab, the micro- and nanotechnology center of the Politecnico di Milano. C.M. thanks the Knut and Alice Wallenberg Foundation for funding through the project "Mastering Morphology for Solution-borne Electronics." A.I. thanks MICINN for a Personal Tecnico de Apoyo contract (PTA2017-14359-I) and gratefully acknowledge the financial support of the Basque Government (Research Groups IT-1175-19) and the MICINN (PGC2018-094548-B-I00, MCIU/AEI/FEDER, UE. Funding for open access charge: Universidade da Coruna/CISUG.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Single-ion conducting poly(ethylene oxide carbonate) as solid polymer electrolyte for lithium batteries

  • Meabe Iturbe, Leire
  • Goujon, Nicolas
  • Li, Chunmei
  • Armand, Michel
  • Forsyth, Maria
  • Mecerreyes Molero, David
Unformatted postprint, Single-ion conducting polymer electrolytes (SIPE) have attracted a lot of interest for application in high energy density lithium metal batteries. SIPEs possess lithium transport numbers close to unity, which does not provoke concentration gradients and holds the promise of limiting lithium dendrite formation. In this article, we have optimized a single-ion polymer incorporating the most successful chemical units in polymer electrolytes, such as ethylene oxide, carbonate and a lithium sulfonimide. This single-ion poly(ethylene oxide carbonate) copolymer was synthesized by polycondensation between polyethylene glycol, dimethyl carbonate and a functional diol including the pendant sulfonamide anionic group and the lithium counter-cation. By playing with the monomer stoichiometry, the crystallinity and ionic conductivity were optimized. The best copolymer showed high ionic conductivity values of 1.2·10-4 S.cm-1 at 70 °C. Lithium interactions and mobility were studied by lithium pulsed field gradient, lithium diffusion, NMR relaxation time measurements and FTIR-ATR analysis. High lithium mobility is observed which is due to the weakly coordinating chemical environment in the polymer and also that the sulfonamide in the SIPE adopts to a greater extent the cis conformation, which is known to promote lithium mobility. Finally, the performance of the singe-ion conducting poly(ethylene oxide carbonate) was compared in lithium symmetric cells versus an analogous conventional salt in polymer electrolyte, showing improved performance in lithium plating and stripping., We are grateful to the financial support of the European Research Council by the Starting Grant Innovative Polymers for Energy Storage (iPes) 306250 and IONBIKE (H2020-MSCA-RISE-2018-823989), and by the Basque Government through ETORTEK Energigune 2013 and IT 999-16. Leire Meabe thanks Spanish Ministry of Education, Culture and Sport for the predoctoral FPU fellowship received to carry out this work. The authors thank for the technical and human support provided by SGIker of UPV/EHU for the NMR facilities of Gipuzkoa campus. The authors thank also Dr. Jose Ignacio Miranda (SGIker) for useful and essential support. Authors would like to thank the human support of Dr. Haijin Zhu and Dr. Luke O’Dell.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Fast Visible-Light Photopolymerization in the Presence of Multiwalled Carbon Nanotubes: Toward 3D Printing Conducting Nanocomposites

  • Gallastegui, Antonela
  • Domínguez Alfaro, Antonio
  • Lezama Diago, Luis María
  • Alegret Ramón, Nuria
  • Prato, Maurizio
  • Gómez, M. Lorena
  • Mecerreyes Molero, David
[EN] A new photoinitiator system (PIS) based on riboflavin (Rf), triethanolamine, and multiwalled carbon nanobutes (MWCNTs) is presented for visible-light-induced photopolymerization of acrylic monomers. Using this PIS, photopolymerization of acrylamide and other acrylic monomers was quantitative in seconds. The intervention mechanism of CNTs in the PIS was studied deeply, proposing a surface interaction of MWCNTs with Rf which favors the radical generation and the initiation step. As a result, polyacrylamide/MWCNT hydrogel nanocomposites could be obtained with varying amounts of CNTs showing excellent mechanical, thermal, and electrical properties. The presence of the MWCNTs negatively influences the swelling properties of the hydrogel but significantly improves its mechanical properties (Young modulus values) and electric conductivity. The new PIS was tested for 3D printing in a LCD 3D printer. Due to the fast polymerizations, 3D-printed objects based on the conductive polyacrylamide/CNT nanocomposites could be manufactured in minutes., The authors are thankful for technical and human support provided by IZO-SGI SGIker of UPV/EHU. The authors would like to thank the European Commission for financial support through funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement no. 823989.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Additive Manufacturing of Conducting Polymers: Recent Advances, Challenges and Opportunities

  • Criado González, Miryam
  • Domínguez Alfaro, Antonio
  • López Larrea, Naroa
  • Alegret Ramón, Nuria
  • Mecerreyes Molero, David
Unformatted postprint, Conducting polymers (CPs) have been attracting great attention in the development of (bio)electronic devices. Most of current devices are rigid 2D systems and possess uncontrollable geometries and architectures that lead to poor mechanical properties presenting ion/electronic diffusion limitations. The goal of the article is to provide an overview about the additive manufacturing (AM) of conducting polymers, which is of paramount importance for the design of future wearable 3D (bio)electronic devices. Among different 3D printing AM techniques, inkjet, extrusion, electrohydrodynamic and light-based printing have been mainly used. This review article collects examples of 3D printing of conducting polymers such as poly(3,4-ethylene-dioxythiophene) (PEDOT), polypyrrole (PPy) and polyaniline (PANi). It also shows examples of AM of these polymers combined with other polymers and/or conducting fillers such as carbon nanotubes, graphene and silver nanowires. Afterwards, the foremost application of CPs processed by 3D printing techniques in the biomedical and energy fields, i.e., wearable electronics, sensors, soft robotics for human motion, or health monitoring devices, among others, will be discussed., This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under the grant agreement No 823989 “IONBIKE”. N.A. has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 753293, acronym NanoBEAT.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Flame Retardant Polyphosphoester Copolymers as Solid Polymer Electrolyte for Lithium Batteries

  • Olmedo Martínez, Jorge L.
  • Meabe Iturbe, Leire
  • Riva, Raphaël
  • Guzmán González, Gregorio
  • Porcarelli, Luca
  • Forsyth, Maria
  • Mugica Iztueta, Miren Agurtzane
  • Calafel Martínez, Miren Itxaso
  • Müller Sánchez, Alejandro Jesús
  • Lecomte, Philippe
  • Jérôme, Christine
  • Mecerreyes Molero, David
Unformatted postprint, Solid-state lithium batteries are considered one of the most promising battery systems due to their high volumetric energy density and safety. Poly(ethylene oxide) (PEO) is the most commonly used solid polymer electrolyte in solid-state batteries. In this article, we introduce new polyphosphoester polymer electrolytes, which show improved flame retardant properties in comparison with PEO. For this purpose, new polyphosphoester copolymers were synthesized, including phosphoester, poly(ethylene glycol) (PEG) and UV cross-linkable vinyl units. Solid polymer electrolytes films based on polyphosphoesters copolymers and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) were prepared by curing under UV-light. The crystallinity present in the copolymers due to the PEG segmentdecreases with the amount of salt in the electrolyte, as seen by DSC. Solid polymer electrolytes based on polyphosphoester copolymers show ionic conductivity values as high as 2·10-4 S cm-1 at 70 °C. FTIR analysis showed that lithium cations complexed with phosphoester groups provoked an increase in the lithium transference number to 0.26 as compared to that of PEO 0.17. Pyrolysis flow combustion calorimetry (PCFC) or microcalorimetry results demonstrated the improved flame retardancy of the polyphosphoesters in comparison to a reference PEO based polymer electrolyte. The selected polyphosphoester solid electrolyte was investigated in a solid-state lithium cell Li0/Polymer electrolyte/LFP battery showing a specific capacity retention close to 80% and coulombic efficiency greater than 98% among 100 cycles at 70 °C., J. L. O.-M. thanks the “Consejo Nacional de Ciencia y Tecnología” (National Council of Science and Technolog y) (CONACYT), Mexico, for the grant awarded no. 471837. This work has also received funding from the Basque Governmen t through grant IT1309-19. G.G-G. is grateful to "Secretaría de Educación, Ciencia, Tecnología e Innovación" from Ciudad de México for the current postdoctoral fellowship (SECTEI/133/2019). Authours would like to thank IONBIKE-RISE project, this project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 823989.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

A 3D bioelectrical interface to assess colorectal cancer progression in vitro

  • Sáez Castaño, Janire
  • Domínguez Alfaro, Antonio
  • Barberio, Chiara
  • Withers, Aimee
  • Mecerreyes Molero, David
  • Owens, Róisín M.
Conducting polymers such as PEDOT have attracted considerable attention in the tissue engineering field to add an active electrical read-out to 3D cell cultures. However, PEDOT is normally copolymerized with PSS− that possibly degrades acidic by-products in the long-term. Given this drawback, it is preferable to tailor PEDOT:polyelectrolyte dispersions that better meet the morphological and physiological microenvironment of the human tissues. Herein, a novel bioelectrical interface in the shape of a 3D porous scaffold made of the conducting PEDOT/hyaluronic acid (HA) and collagen (COL) is presented. For this purpose, first, the oxidative chemical polymerization of 3,4-ethylenedioxythiophene (EDOT) was carried out in the presence of the biopolymers. Then, porous scaffolds were constructed by freeze-drying the dispersions which allows good control of pore size and morphology, showing unique mechanical properties. Interestingly, these biocompatible, conducting scaffolds successfully support growth of 3D cell cultures of sw480 colon adenocarcinoma cancer cells, achieving good cell attachment and proliferation. When integrated with electrodes, they further allow real-time electrical monitoring of cell growth and proliferation. Upon the addition of the flavonoid morin, cell apoptosis and death were monitored by electrochemical impedance spectroscopy and optical immunostaining., demonstrating the promise of these scaffolds for cancer cell progression modeling. We believe that our findings have demonstrated the great promise of combining PEDOT with biopolymers for cancer cell progression modeling but also will be of interest in broader applications in the fields of biomedicine, wearable electronics, and prospectively applied to clinic., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 842356 ICE-METs project. DM acknowledges the economic support of Spanish MCIN/AEI/PID2020-119026 GB-I00 and by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under the grant agreement No 823989 “IONBIKE”.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Injectable PEDOT:PSS/cholinium ionic liquid mixed conducting materials for electrocardiogram recordings

  • Casado Pérez, Nerea
  • Zendegi Zelaia, Sara
  • Tomé, Liliana C.
  • Velasco Bosom, Santiago
  • Aguzin, Ana
  • Picchio, Matías L.
  • Criado González, Miryam
  • Malliaras, George G.
  • Forsyth, Maria
  • Mecerreyes Molero, David
Unformatted postprint, Mixed conducting polymer electrodes built from poly(3,4-ethylenedioxythiophene): poly(styrene sulfonate) (PEDOT:PSS) are attracting a great deal of interest in healthcare monitoring. However, the widespread application of this organic conductor in wearable devices is seriously restricted by toxic additives used to enhance its electrical conductivity. Herein, we explored a family of biocompatible ionic liquids (ILs), based on the cholinium cation and different carboxylated anions, as dopants and gelators for PEDOT:PSS to formulate safe bioelectrodes for long-term cutaneous recording. We examined the effect of the IL anion on the ionic-electronic conductivities and physicochemical properties of these soft conductors. Among the different ILs tested, cholinium lactate ([Ch][Lac]) afforded the greatest increase in the materials' electronic conductivity (≈30 S/cm vs. 0.2 S/cm for non-formulated PEDOT:PSS). Moreover, the PEDOT:PSS/IL mixtures formed gels due to supramolecular intereactions. The gels showed a rheological behavior associated to gels with excellent injectability properties. Finally, the performance of PEDOT:PSS/[Ch][Lac] as biocompatible electrodes for electrocardiogram recording is discussed. All in all, the obtained results unveil the effectiveness of cholinum-based ILs as non-toxic dopants of PEDOT:PSS, paving the way to explore novel bioderived electrolytes., This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under the grant agreement No 823989 "IONBIKE" and AEI-MINECO for project PID2020-119026GB-I00. The financial support received from CONICET and ANPCyT (Argentina) is also gratefully acknowledged. Nerea Casado would like to thank the University of the Basque Country (No. 823989) for funding through a specialization of research staff fellowship (ESPDOC 19/99). Santiago Velasco-Bosom acknowledges the support from W.D Armstrong Studentship. Liliana C. Tomé is grateful to FCT (Fundação para a Ciência e a Tecnologia) in Portugal for her research contract under Scientific Employment Stimulus (2020.01555.CEECIND). Associate Laboratory for Green Chemistry − LAQV also acknowledges the financial support from FCT/MCTES (UIDB/50006/2020 and UIDP/50006/2020).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Mixed Conductive, Injectable, and Fluorescent Supramolecular Eutectogel Composites

  • Criado González, Miryam
  • Alegret Ramón, Nuria
  • Fracaroli, Alejandro M.
  • Mantione, Daniele
  • Guzmán González, Gregorio
  • Del Olmo Martínez, Rafael
  • Tashiro, Kentaro
  • Tomé, Liliana C.
  • Picchio, Matías L.
  • Mecerreyes Molero, David
Eutectogels are an emerging family of soft ionic materials alternative to ionic liquid gels and organogels, offering fresh perspectives for designing functional dynamic platforms in water-free environments. Herein, the first example of mixed ionic and electronic conducting supramolecular eutectogel composites is reported. A fluorescent glutamic acid-derived low-molecular-weight gelator (LMWG) was found to self-assemble into nanofibrillar networks in deep eutectic solvents (DES)/poly(3,4-ethylenedioxythiophene) (PEDOT): chondroitin sulfate dispersions. These dynamic materials displayed excellent injectability and self-healing properties, high ionic conductivity (up to 10−2 S cm−1), good biocompatibility, and fluorescence imaging ability. This set of features turns the mixed conducting supramolecular eutectogels into promising adaptive materials for bioimaging and electrostimulation applications., This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under the grant agreement No 823989 “IONBIKE”. The financial support received from CONICET and ANPCyT (Argentina) is also gratefully acknowledged. M. C.-G. thanks Emakiker Grant Program of POLYMAT. L. C. T. is grateful to Fundação para a Ciência e a Tecnologia (FCT/MCTES) in Portugal for her research contract under Scientific Employment Stimulus (2020.01555.CEECIND), and Associate Laboratory for Green Chemistry—LAQV, which is also financed by FCT/MCTES (UIDB/50006/2020 and UIDP/50006/2020). D. M. thanks “Ayuda RYC2021-031668-I financiada por MCIN/AEI/10.13039/501100011033 y por la Unión Europea NextGenerationEU/PRTR”. The authors thank the technical and human support provided by SGIker (UPV/EHU/ERDF, EU).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Carrageenans as Sustainable Water-Processable Binders for High-Voltage NMC811 Cathodes

  • Rolandi, Ana Clara
  • Pozo Gonzalo, Cristina
  • De Meaza, Iratxe
  • Casado Pérez, Nerea
  • Forsyth, Maria
  • Mecerreyes Molero, David
Poly(vinylidene fluoride) (PVDF) is the most common binder for cathode electrodes in lithium-ion batteries. However, PVDF is a fluorinated compound and requires toxic N-methyl-2-pyrrolidone (NMP) as a solvent during the slurry preparation, making the electrode fabrication process environmentally unfriendly. In this study, we propose the use of carrageenan biopolymers as a sustainable source of water-processable binders for high-voltage NMC811 cathodes. Three types of carrageenan (Carr) biopolymers were investigated, with one, two, or three sulfonate groups (SO3–), namely, kappa, iota, and lambda carrageenans, respectively. In addition to the nature of carrageenans, this article also reports the optimization of the cathode formulations, which were prepared by using between 5 wt % of the binder to a lower amount of 2 wt %. Processing of the aqueous slurries and the nature of the binder, in terms of the morphology and electrochemical performance of the electrodes, were also investigated. The Carr binder with 3SO3– groups (3SO3– Carr) exhibited the highest discharge capacities, delivering 133.1 mAh g–1 at 3C and 105.0 mAh g–1 at 5C, which was similar to the organic-based PVDF electrode (136.1 and 108.7 mAh g–1, respectively). Furthermore, 3SO3– Carr reached an outstanding capacity retention of 91% after 90 cycles at 0.5C, which was attributed to a homogeneous NMC811 and a conductive carbon particle dispersion, superior adhesion strength to the current collector (17.3 ± 0.7 N m–1 vs 0.3 ± 0.1 N m–1 for PVDF), and reduced charge-transfer resistance. Postmortem analysis unveiled good preservation of the NMC811 particles, while the 1SO3– Carr and 2SO3– Carr electrodes showed damaged morphologies., The authors acknowledge the Australian Research Council (ARC) Centre for Training Centre for Future Energy Storage Technologies (storEnergy) (IC180100049) for funding. The authors would like to thank the European Commission for financial support through funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 823989 and Spanish AEI-MINECO for funding through project PID2020-119026 GB-I00.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Y6 Organic Thin-Film Transistors with Electron Mobilities of 2.4 cm² V⁻¹ s⁻¹ via Microstructural Tuning

  • Gutiérrez Fernández, Edgar
  • Scaccabarozzi, Alberto D.
  • Basu, Aniruddha
  • Solano, Eduardo
  • Anthopoulos, Thomas D.
  • Martín, Jaime
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] There is a growing demand to attain organic materials with high electron mobility, μe, as current reliable reported values are significantly lower than those exhibited by their hole mobility counterparts. Here, it is shown that a well-known nonfullerene-acceptor commonly used in organic solar cells, that is, BTP-4F (aka Y6), enables solution-processed organic thin-film transistors (OTFT) with a μe as high as 2.4 cm² V⁻¹ s⁻¹. This value is comparable to those of state-of-the-art n-type OTFTs, opening up a plethora of new possibilities for this class of materials in the field of organic electronics. Such efficient charge transport is linked to a readily achievable highly ordered crystalline phase, whose peculiar structural properties are thoroughly discussed. This work proves that structurally ordered nonfullerene acceptors can exhibit intrinsically high mobility and introduces a new approach in the quest of high μe organic materials, as well as new guidelines for future materials design., J.M. thanks MICINN/FEDER for the Ramón y Cajal contract and the grant Ref. PGC2018-094620-A-I00). The Xunta de Galicia is also acknowledged for the grant Proyectos de Consolidación Ref. ED431F 2021/009. J.M and E.G.-F. acknowledge support through the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN-01-2018-2020 (FET-Open Challenging Current Thinking), “LION-HEARTED′, grant agreement no. 828984. J.M would like to thank the financial support provided by the IONBIKE RISE project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 823989. The authors also thank the technical and human support provided by SGIker of UPV/EHU and the European funding (ERDF and ESF), Xunta de Galicia; ED431F 2021/009
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Polymorphism in Non-Fullerene Acceptors Based on Indacenodithienothiophene

  • Marina, Sara
  • Scaccabarozzi, Alberto D.
  • Gutiérrez Fernández, Edgar
  • Solano, Eduardo
  • Khirbat, Aditi
  • Ciammaruchi, Laura
  • Iturrospe, Amaia
  • Balzer, Alex
  • Yu, Liyang
  • Gabirondo, Elena
  • Monnier, Xavier
  • Sardón, Haritz
  • Anthopoulos, Thomas D.
  • Caironi, Mario
  • Campoy-Quiles, Mariano
  • Müller, Christian
  • Cangialosi, Daniele
  • Stingelin, Natalie
  • Martín, Jaime
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] Organic solar cells incorporating non-fullerene acceptors (NFAs) have reached remarkable power conversion efficiencies of over 18%. Unlike fullerene derivatives, NFAs tend to crystallize from solutions, resulting in bulk heterojunctions that include a crystalline acceptor phase. This must be considered in any morphology-function models. Here, it is confirmed that high-performing solution-processed indacenodithienothiophene-based NFAs, i.e., ITIC and its derivatives ITIC-M, ITIC-2F, and ITIC-Th, exhibit at least two crystalline forms. In addition to highly ordered polymorphs that form at high temperatures, NFAs arrange into a low-temperature metastable phase that is readily promoted via solution processing and leads to the highest device efficiencies. Intriguingly, the low-temperature forms seem to feature a continuous network that favors charge transport despite of a poorly order along the π–π stacking direction. As the optical absorption of the structurally more disordered low-temperature phase can surpass that of the more ordered polymorphs while displaying comparable—or even higher—charge transport properties, it is argued that such a packing structure is an important feature for reaching highest device efficiencies, thus, providing guidelines for future materials design and crystal engineering activities., This work was supported by the Ministerio de Ciencia e Innovacion/FEDER (under Ref. PGC2018-094620-A-I00 and PGC2018-095411-B-I00, CEX2019-000917-S, and PGC2018-095411-B-100) and the Basque Country Government (Ref. PIBA19-0051). S.M. is grateful to POLYMAT for the doctoral scholarship. The authors thank A. Arbe, A. Alonso-Mateo, and L. Hueso for their support and access to characterization tools. The authors also thank the technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). GIWAXS experiments were performed at BL11 NCD-SWEET beamline at ALBA Synchrotron (Spain) with the collaboration of ALBA staff. J.M and E.F.-G. acknowledge support through the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN 01-2018-2020 (FET-Open Challenging Current Thinking), “LION-HEARTED,” Grant Agreement No. 828984. J.M and N.S. would like to thank the financial support provided by the IONBIKE RISE project, which received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 823989. N.S., A.K., and A.B. furthermore are grateful to the U.S. National Science Foundation (NSF) for support via Project No. 1905901 within NSF's Division of Materials Research. A.S. and M.C. acknowledge financial support by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program “HEROIC,” Grant Agreement No. 638059. This work was partially carried out at Polifab, the micro- and nanotechnology center of the Politecnico di Milano. C.M. thanks the Knut and Alice Wallenberg Foundation for funding through the project “Mastering Morphology for Solution-borne Electronics.” A.I. thanks MICINN for a Personal Técnico de Apoyo contract (PTA2017-14359-I) and gratefully acknowledge the financial support of the Basque Government (Research Groups IT-1175-19) and the MICINN (PGC2018-094548-B-I00, MCIU/AEI/FEDER, UE. Funding for open access charge: Universidade da Coruña/CISUG., Gobierno Vasco; PIBA19-0051, Gobierno Vasco; IT-1175-19, Estados Unidos. National Science Foundation; 1905901
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Using Spatial Confinement to Decipher Polymorphism in the Organic Semiconductor p-DTS(FBTTh2)2

  • Marina, Sara
  • Martín, Jaime
[Abstrac]: Many molecular semiconductors show a pronounced polymorphism; i.e. they can adopt different crystal arrangements depending, e.g., on temperature, pressure, and selected solidification pathways. This renders reliable fabrication of molecular semiconductor devices challenging, as minute changes in processing can lead to numerous structures and, hence, optoelectronic responses. Here, we demonstrate using the example of p-DTS(FBTTh₂)₂ that spatial confinement at the nanoscale can be exploited to detect specific polymorphs and the conditions under they form. A new polymorph exhibiting a higher charge-carrier mobility compared to previously reported p-DTS(FBTTh₂)₂ crystal forms is found at elevated temperatures and high degree of confinement, illustrating the benefit of our approach and promising that spatial confinement will find wide- spread application to understand and control polymorph formation in organic semiconductors., This work is supported by MCINN/FEDER (under ref. PID2021- 126243NB-I00 and PGC2018-095411-B-I00) and Xunta de Galicia (Proyectos de Consolidacio´n ref. ED431F 2021/009). J. M. thanks MCINN for the Ramo´n y Cajal contract. N. S. in addition gratefully acknowledges support from the IdEx Bordeaux Excellence program (ANR-10-IDEX-03-02). The authors would like to acknowledge the financial support provided by the IONBIKE RISE project. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 823989. All authors acknowledge the synchrotron radiation source ELETTRA (Trieste, Italy) for providing beam time and the staff from the SAXS beamline for support. This work was authored in part by the National Renewable Energy Laboratory, operated by Alliance for Sustainable Energy, LLC, for the U. S. Department of Energy (DOE) under Contract No. DE-AC36- 08GO28308. Funding for TRMC measurements was provided by the Solar Photochemistry Program, Division of Chemical Sciences, Geosciences, and Biosciences, Office of Basic Energy Sciences, U. S. Department of Energy. The views expressed in the article do not necessarily represent the views of the DOE or the U. S. Government. The U. S. Government retains and the publisher, by accepting the article for publication, acknowledges that the U. S. Government retains a nonexclusive, paidup, irrevocable, worldwide license to publish or reproduce the published form of this work, or allow others to do so, for U. S. Government purposes. J. M. thanks MICINN/FEDER for the Grant PID2021-126243NB-I00., Xunta de Galicia; ED431F 2021/009
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High lithium conductivity of miscible poly(ethylene oxide)/methacrylic sulfonamide anionic polyelectrolyte polymer blends

  • Olmedo-Martínez, Jorge L.
  • Porcarelli, Luca
  • Alegría, Ángel
  • Mecerreyes, David
  • Müller, Alejandro J.
In this work, we develop novel single-ion polymer electrolytes by mixing poly(lithium 1-[3-(methacryloyloxy) propylsulfonyl]-1-(trifluoromethanesulfonyl) imide) (PLiMTFSI) and poly(ethylene oxide) (PEO) with different molecular weights. The impact of PLiMTFSI on the crystallization and conductivity of the blends was explored in detail. When PLiMTFSI (an amorphous polymer) is added to PEO, the crystallization ability of PEO decreases. However, blends with high-molecular weight PEO (1000 kg/mol) experience a lower reduction in crystallinity and melting points. As a result, lower conductivity values were obtained in these blends, which is why most of the study was then focused on blends incorporating a lower-molecular weight PEO (100 kg/mol). We show that the melting point, degree of crystallinity, spherulitic growth, and overall crystallization kinetics decrease in the presence of PLiMTFSI, which are all signs of miscibility. Furthermore, the blends show a single glass transition temperature over the whole composition range. Therefore, our results indicate that PEO and PLiMTFSI are miscible, as corroborated by applying the Nishi-Wang equation and obtaining negative χ12 values (i.e., the Flory-Huggins interaction parameter) for all blends. Our results show that intermediate molecular weight blends (100 kg/mol PEO and 50 kg/mol PLiMTFSI) showed the highest ionic conductivity value. Interestingly, a value of 2.1 × 10-4 S/cm was obtained at 70 °C, which is one of the highest reported so far for a free-standing film of single-ion conducting polymer electrolytes. Finally, employing dielectric spectroscopy, the contribution of ion density and ion mobility to ionic conductivity could be separated. It was found that ion mobility is the parameter that has a greater weight in the conduction process., We wish to thank the Consejo Nacional de Ciencia y Tecnología (the National Council of Science and Technology) (CONACYT), Mexico, for the grant awarded to J.L.O.-M. no. 471837. L.P. has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement no. 797295. We acknowledge funding from the Basque Government through grant IT1309-19 and IT1175-19. Authors would like to thank IONBIKE-RISE project, and this project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement no. 823989.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The importance of quantifying the composition of the amorphous intermixed phase in organic solar cells

  • Marina, Sara
  • Kaufmann, Noëmi Petrina
  • Karki, Akchheta
  • Gutiérrez-Meza, Elizabeth
  • Gutiérrez-Fernández, Edgar
  • Vollbrecht, Joachim
  • Solano, Eduardo
  • Walker, Barnaby
  • Bannock, James H.
  • Mello, John de
  • Silva, Carlos
  • Nguyen, Thuc-Quyen
  • Cangialosi, Daniele
  • Stingelin, Natalie
  • Martín, Jaime
The relation of phase morphology and solid‐state microstructure with organic photovoltaic (OPV) device performance has intensely been investigated over the last twenty years. While it has been established that a combination of donor:acceptor intermixing and presence of relatively phase‐pure donor and acceptor domains is needed to get an optimum compromise between charge generation and charge transport/charge extraction, a quantitative picture of how much intermixing is needed is still lacking. This is mainly due to the difficulty in quantitatively analyzing the intermixed phase, which generally is amorphous. Here, fast scanning calorimetry, which allows measurement of device‐relevant thin films (<200 nm thickness), is exploited to deduce the precise composition of the intermixed phase in bulk‐heterojunction structures. The power of fast scanning calorimetry is illustrated by considering two polymer:fullerene model systems. Somewhat surprisingly, it is found that a relatively small fraction (<15 wt%) of an acceptor in the intermixed amorphous phase leads to efficient charge generation. In contrast, charge transport can only be sustained in blends with a significant amount of the acceptor in the intermixed phase (in this case: ≈58 wt%). This example shows that fast scanning calorimetry is an important tool for establishing a complete compositional characterization of organic bulk heterojunctions. Hence, it will be critical in advancing quantitative morphology–function models that allow for the rational design of these devices, and in delivering insights in, for example, solar cell degradation mechanisms via phase separation, especially for more complex high‐performing systems such as nonfullerene acceptor:polymer bulk heterojunctions., J.M. thanks MCIU for the Ramón y Cajal contract and the Ikerbasque Foundation for the Ikerbasque Research Fellow program. J.M is also grateful to MCIU (Ref. PGC2018‐094620‐A‐I00), to Basque Country Government (Ref. PIBA19‐0051). S.M. is grateful to POLYMAT for the doctoral scholarship. J.M and E.G.‐F. acknowledge support through the European Union's Horizon 2020 research and innovation program, H2020‐FETOPEN‐01‐2018‐2020 (FET‐Open Challenging Current Thinking), “LION‐HEARTED”, grant agreement no. 828984. N.S. in addition gratefully acknowledges support from the IdEx Bordeaux Excellence program (ANR‐10‐IDEX‐03‐02). D.C. acknowledges the Basque Country Government (Ref. No. IT‐654‐ 13 (GV)) and MINECO (Grant No. MAT2015‐63704‐P) for their financial support. The work at Georgia Tech was supported by the National Science Foundation (DMR‐1729737). J.V. acknowledges funding by the Alexander‐von‐Humboldt Stiftung. The authors would like to thank the financial support provided by the IONBIKE RISE project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska‐Curie grant agreement No 823989. T.Q.N. acknowledges support from the Organic Materials Chemistry Program, Air Force Office of Scientific Research (grant no. FA9550‐19‐1‐0348)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymorphism in non-fullerene acceptors based on indacenodithienothiophene

  • Marina, Sara
  • Scaccabarozzi, Alberto D.
  • Gutiérrez-Fernández, Edgar
  • Solano, Eduardo
  • Khirbat, Aditi
  • Ciammaruchi, Laura
  • Iturrospe, Amaia
  • Balzer, Alex
  • Yu, Liyang
  • Gabirondo, Elena
  • Monnier, Xavier
  • Sardón, Haritz
  • Anthopoulos, Thomas D.
  • Caironi, Mario
  • Campoy Quiles, Mariano
  • Müller, Christian
  • Cangialosi, Daniele
  • Stingelin, Natalie
  • Martín, Jaime
Organic solar cells incorporating non-fullerene acceptors (NFAs) have reached remarkable power conversion efficiencies of over 18%. Unlike fullerene derivatives, NFAs tend to crystallize from solutions, resulting in bulk heterojunctions that include a crystalline acceptor phase. This must be considered in any morphology-function models. Here, it is confirmed that high-performing solution-processed indacenodithienothiophene-based NFAs, i.e., ITIC and its derivatives ITIC-M, ITIC-2F, and ITIC-Th, exhibit at least two crystalline forms. In addition to highly ordered polymorphs that form at high temperatures, NFAs arrange into a low-temperature metastable phase that is readily promoted via solution processing and leads to the highest device efficiencies. Intriguingly, the low-temperature forms seem to feature a continuous network that favors charge transport despite of a poorly order along the π–π stacking direction. As the optical absorption of the structurally more disordered low-temperature phase can surpass that of the more ordered polymorphs while displaying comparable—or even higher—charge transport properties, it is argued that such a packing structure is an important feature for reaching highest device efficiencies, thus, providing guidelines for future materials design and crystal engineering activities., This work is supported by the Ministerio de Ciencia e Innovacion/FEDER (under Ref. PGC2018-094620-A-I00 and PGC2018-095411-B-I00, CEX2019-000917-S and PGC2018- 095411-B-100) and the Basque Country Government (Ref. PIBA19-0051). S.M. is grateful to POLYMAT for the doctoral scholarship. The authors thank A. Arbe, A. Alonso-Mateo, L. Hueso for their support and access to characterization tools. The authors also thank the technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). GIWAXS experiments were performed at BL11 NCD-SWEET beamline at ALBA Synchrotron (Spain) with the collaboration of ALBA staff. J.M and E.F.-G. acknowledge support through the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN 01- 2018-2020 (FET-Open Challenging Current Thinking), ‘LION-HEARTED', grant agreement n. 828984. J.M and N.S. would like to thank the financial support provided by the IONBIKE RISE project, which has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 823989. N.S. and A.K. and A.B. furthermore are grateful to the U.S. National Science Foundation (NSF) for support via project # 1905901 within NSF’s Division of Materials Research. A. S. and M. C. acknowledge financial support by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program “HEROIC,” grant agreement 638059. This work was partially carried out at Polifab, the micro- and nanotechnology center of the Politecnico di Milano. .C.M. thanks the Knut and Alice Wallenberg Foundation for funding through the project “Mastering Morphology for Solution-borne Electronics”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Using spatial confinement to decipher polymorphism in the organic semiconductor p-DTS(FBTTh2)2

  • Marina, Sara
  • Dyson, Matthew
  • Rodríguez Martínez, Xabier
  • Reid, Obadiah G.
  • Li, Ruipeng
  • Rumbles, Garry
  • Smilgies, Detlef
  • Amassian, Aram
  • Campoy Quiles, Mariano
  • Stingelin, Natalie
  • Martín, Jaime
Many molecular semiconductors show a pronounced polymorphism; i.e. they can adopt different crystal arrangements depending, e.g., on temperature, pressure, and selected solidification pathways. This renders reliable fabrication of molecular semiconductor devices challenging, as minute changes in processing can lead to numerous structures and, hence, optoelectronic responses. Here, we demonstrate using the example of p-DTS(FBTTh2)2 that spatial confinement at the nanoscale can be exploited to detect specific polymorphs and the conditions under they form. A new polymorph exhibiting a higher charge-carrier mobility compared to previously reported p-DTS(FBTTh2)2 crystal forms is found at elevated temperatures and high degree of confinement, illustrating the benefit of our approach and promising that spatial confinement will find wide-spread application to understand and control polymorph formation in organic semiconductors., This work is supported by MCINN/FEDER (under ref. PID2021-126243NB-I00 and PGC2018-095411-B-I00) and Xunta de Galicia (Proyectos de Consolidación ref. ED431F 2021/009). J. M. thanks MCINN for the Ramón y Cajal contract. N. S. in addition gratefully acknowledges support from the IdEx Bordeaux Excellence program (ANR-10-IDEX-03-02). The authors would like to acknowledge the financial support provided by the IONBIKE RISE project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 823989. All authors acknowledge the synchrotron radiation source ELETTRA (Trieste, Italy) for providing beam time and the staff from the SAXS beamline for support. This work was authored in part by the National Renewable Energy Laboratory, operated by Alliance for Sustainable Energy, LLC, for the U. S. Department of Energy (DOE) under Contract No. DE-AC36-08GO28308. Funding for TRMC measurements was provided by the Solar Photochemistry Program, Division of Chemical Sciences, Geosciences, and Biosciences, Office of Basic Energy Sciences, U. S. Department of Energy. The views expressed in the article do not necessarily represent the views of the DOE or the U. S. Government. The U. S. Government retains and the publisher, by accepting the article for publication, acknowledges that the U. S. Government retains a nonexclusive, paid-up, irrevocable, worldwide license to publish or reproduce the published form of this work, or allow others to do so, for U. S. Government purposes. J. M. thanks MICINN/FEDER for the Grant PID2021-126243NB-I00., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PNIPAM/PEDOT:PSS Hydrogels for Multifunctional Organic Electrochemical Transistors

  • Lopez-Larrea, N.
  • Wustoni, S.
  • Peñas, Mario I.
  • Uribe, J.
  • Dominguez-Alfaro, A.
  • Gallastegui, A.
  • Inal, S.
  • Mecerreyes, D.
The development of multifunctional organic materials represents a vibrant area of research, with applications spanning from biosensing to drug delivery. This study shows the development of a multifunctional bioelectronic device suitable for prolonged temperature monitoring and drug delivery applications. The device relies on a conducting and thermo-responsive hydrogel made of poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) (PEDOT:PSS) and poly(N-isopropylacrylamide) (PNIPAM). This multifunctional hydrogel is 4D printable by Digital Light Processing (DLP) method and exhibits optimal biocompatibility. The hydrogel features a low critical solution temperature (LCST) ≈35 °C, above which its resistance changes dramatically due to the shrinkage it undergoes with temperature. The integration of PNIPAM/PEDOT hydrogel into an organic electrochemical transistor (OECT) as the gate electrode allows to generate a miniaturized bioelectronic device with a reversible response to temperature variations between 25 to 45 °C, along with high sensitivity of 0.05 °C. Furthermore, the PNIPAM/PEDOT hydrogel demonstrates its utility in drug delivery, achieving an Insulin-FITC release rate of 82 ± 4% at 37 °C, mimicking human body conditions. The hydrogel's functionality to store and release the insulin does not compromise its thermo-responsivity and the overall performance of the OECT. This multifunctional OECT opens new avenues for the development of customizable and personalized sensing and drug-delivery systems., This work was supported by the Marie Sklodowska-Curie Research and In- novation Staff Exchanges (RISE) under grant agreement No. 823989 “ION- BIKE”. Naroa Lopez-Larrea gratefully acknowledges the support from the Spanish Ministry of Universities (FPU20/03416). The authors thank Dr. Itx- aso Calafel (POLYMAT, UPV/EHU) for her support regarding rheological characterization and Jessica Parrado for OECT fabrication.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biobased acrylic latexes/sodium carboxymethyl cellulose aqueous binders for lithium-Ion NMC 811 cathodes

  • Rolandi, Ana Clara
  • Barquero, Aitor
  • Pozo Gonzalo, Cristina
  • Meatza, I. de
  • Casado, Nerea
  • Forsyth, Maria
  • Leiza, Jose R.
  • Mecerreyes, David
5 figures, 1 table.-- This publication is licensed under CC-BY 4.0., The increasing demands for sustainable energy storage technologies have prompted extensive research in the development of eco-friendly materials for lithium-ion batteries (LIBs). This research article presents the design of biobased latexes, which are fluorine-free and rely on renewable resources, based on isobornyl methacrylate (IBOMA) and 2-octyl acrylate (2OA) to be used as binders in batteries. Three different compositions of latexes were investigated, varying the ratio of IBOMA and 2OA: (1) Poly2OA homopolymer, (2) Poly(2OA0,6-co-IBOMA0,4) random copolymer, and (3) PolyIBOMA homopolymer. The combination of the two monomers provided a balance between rigidity from the hard monomer (IBOMA) and flexibility from the soft one (2OA). The study evaluated the performance of the biobased latexes using sodium carboxymethyl cellulose (CMC) as a thickener and cobinder by fabricating LiNi0.8Mn0.1Co0.1O2 (NMC 811) cathodes. Also, to compare with the state of the art, organic processed PVDF electrodes were prepared. Among aqueous slurries, rheological analysis showed that the CMC + Poly(2OA0,6-co-IBOMA0,4) binder system resulted in the most stable and well-dispersed slurries. Also, the electrodes prepared with this latex demonstrated enhanced adhesion (210 ± 9 N m–1) and reduced cracks compared to other aqueous compositions. Electrochemical characterization revealed that the aqueous processed cathodes using the CMC + Poly(2OA0,6-co-IBOMA0,4) biobased latex displayed higher specific capacities than the control with no latex at high C-rates (100.3 ± 2.1 vs 64.5 ± 0.8 mAh g–1 at 5C) and increased capacity retention after 90 cycles at 0.5C (84% vs 81% for CMC with no latex). Overall, the findings of this study suggest that biobased latexes, specifically the CMC + Poly(2OA0,6-co-IBOMA0,4) composition, are promising as environmentally friendly binders for NMC 811 cathodes, contributing to the broader goal of achieving sustainable energy storage systems., The authors acknowledge the Australian Research Council (ARC) Centre for Training Centre for Future Energy Storage Technologies (storEnergy) (IC180100049) for funding. The authors would like to thank the European Commission for financial support through funding from the European Union’s Horizon 2020 research and innovation programunder the Marie Sklodowska-Curie grant agreement no. 823989 and Spanish AEI-MINECO for funding through project PID2020-119026 GB-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixed Conductive, Injectable, and Fluorescent Supramolecular Eutectogel Composites

  • Criado-González, Miryam
  • Alegret, Nuria
  • Fracaroli, Alejandro M.
  • Mantione, Daniele
  • Guzmán-González, Gregorio
  • Del Olmo, Rafael
  • Tashiro, Kentaro
  • Tomé, Liliana C.
  • Picchio, Matias L.
  • Mecerreyes, David
Eutectogels are an emerging family of soft ionic materials alternative to ionic liquid gels and organogels, offering fresh perspectives for designing functional dynamic platforms in water-free environments. Herein, the first example of mixed ionic and electronic conducting supramolecular eutectogel composites is reported. A fluorescent glutamic acid-derived low-molecular-weight gelator (LMWG) was found to self-assemble into nanofibrillar networks in deep eutectic solvents (DES)/poly(3,4-ethylenedioxythiophene) (PEDOT): chondroitin sulfate dispersions. These dynamic materials displayed excellent injectability and self-healing properties, high ionic conductivity (up to 10-2  S cm-1 ), good biocompatibility, and fluorescence imaging ability. This set of features turns the mixed conducting supramolecular eutectogels into promising adaptive materials for bioimaging and electrostimulation applications., This work was supported by Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) under the grant agreement No 823989 “IONBIKE”. The financial support received from CONICET and ANPCyT (Argenti-na) is also gratefully acknowledged. M. C.-G. thanks Emakiker Grant Program of POLYMAT. L. C. T. is gratefu lto Fundação para a Ciência e a Tecnologia (FCT/MCTES) in Portugal for her research contract under ScientificEmployment Stimulus (2020.01555.CEECIND), and Asso-ciate Laboratory for Green Chemistry—LAQV, which isalso financed by FCT/MCTES (UIDB/50006/2020 and UIDP/50006/2020). D. M. thanks “Ayuda RYC2021-031668-I financiada por MCIN/AEI/10.13039/501100011033 y por laUnión Europea Next GenerationEU/PRTR”. The authors thank the technical and human support provided by SGIker(UPV/EHU/ERDF, EU)., Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Semi-solid electrodes based on injectable hydrogel electrolytes for shape-conformable batteries

  • Borlaf Pinar, Mario
  • Picchio, Matias L.
  • Luque, Gisela Carina
  • Criado-Gonzalez, Miryam
  • Guzmán-Gonzalez, Gregorio
  • Perez Antolin, Daniel
  • Lingua, Gabriele
  • Mecerreyes, David
  • Ventosa Arbaizar, Edgar
The development of new battery concepts, chemistries and fabrication processes is driven by the bloom of emerging applications in a variety of fields ranging from the Internet of Things to Smart Healthcare. Shape factor-free and shape-conformable power sources are highly desired for integration with complex-shape electronic devices. Herein, a new fabrication process for shape-conformable batteries is explored. Battery cells having targeted shapes are fabricated and assisted by 3D printing. Then, flowable semi-solid electrodes are used to fill in the prefabricated parts of the battery cell. The use of injectable hydrogel electrolytes enables semi-solid electrodes to possess special rheological properties as they are flowable during the fabrication process, while gelation of the electrolytes ensures their immobility during battery operation. Herein, poly(vinyl alcohol):gallic acid gels are investigated for aqueous Zn–LiFePO4 batteries. After evaluation of the effect of electrode formulation on the rheological properties as well as the ionic and electronic properties, simple-shape and UBU-shape batteries were fabricated using the best formulation. The prototype achieved areal capacities above 3 mA h cm−2, utilization rate between 150 and 180 mA h g−1 (LFP), and capacity fading of 0.2% h−1. While the prototype demonstrated the feasibility of the proposed fabrication process, improvements are still required. Shrinking of gel electrolytes and parasitic electrochemical reactions associated with the battery chemistry and the operation conditions are identified as the main challenges to be addressed for improving the performance., The authors acknowledge the financial support by the Spanish Ministry of Science and Innovation and NextGenerationEU (TED2021-131651B-C21 and TED2021-131651B-C22) and Ramón y Cajal award (Ministry of Science and Innovation and European Social Funds, RYC2018-026086-I). This work was supported by the Regional Government of Castilla y León (Junta de Castilla y León) and by the Ministry of Science and Innovation MICIN and the European Union NextGenerationEU/PRTR (C17. I1). The Marie Sklodowska-Curie Research and Innovation Staff Exchanges (RISE) support under the grant agreement No 823989 “IONBIKE” is also greatly acknowledged.