Pasar al contenido principal

NANO-OBJETOS BLANDOS A MEDIDA BASADOS EN ENLACES INTRACADENA: DEL DISEÑO A LOS MATERIALES

PGC2018-094548-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 44
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Physical Aging Behavior of a Glassy Polyether

  • Monnier, Xavier
  • Marina, Sara
  • López de Pariza, Xabier
  • Sardón, Haritz
  • Martín, Jaime
  • Cangialosi, Daniele
[Abstract] The present work aims to provide insights on recent findings indicating the presence of multiple equilibration mechanisms in physical aging of glasses. To this aim, we have investigated a glass forming polyether, poly(1-4 cyclohexane di-methanol) (PCDM), by following the evolution of the enthalpic state during physical aging by fast scanning calorimetry (FSC). The main results of our study indicate that physical aging persists at temperatures way below the glass transition temperature and, in a narrow temperature range, is characterized by a two steps evolution of the enthalpic state. Altogether, our results indicate that the simple old-standing view of physical aging as triggered by the α relaxation does not hold true when aging is carried out deep in the glassy state., D.C. research was funded by MICINN-Spain and FEDER-UE, grant PGC2018-094548-B-I00; and the Basque Government, grant IT-1175-19. J.M. thanks MICINN /FEDER for grant Ref. PGC2018-094620-A-I00, Eusko Jaurlaritza; IT-1175-19
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Polymorphism in Non-Fullerene Acceptors Based on Indacenodithienothiophene

  • Marina, Sara
  • Scaccabarozzi, Alberto D.
  • Gutiérrez Fernández, Edgar
  • Solano, Eduardo
  • Khirbat, Aditi
  • Ciammaruchi, Laura
  • Iturrospe, Amaia
  • Balzer, Alex
  • Yu, Liyang
  • Gabirondo, Elena
  • Monnier, Xavier
  • Sardón, Haritz
  • Anthopoulos, Thomas D.
  • Caironi, Mario
  • Campoy-Quiles, Mariano
  • Müller, Christian
  • Cangialosi, Daniele
  • Stingelin, Natalie
  • Martín, Jaime
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] Organic solar cells incorporating non-fullerene acceptors (NFAs) have reached remarkable power conversion efficiencies of over 18%. Unlike fullerene derivatives, NFAs tend to crystallize from solutions, resulting in bulk heterojunctions that include a crystalline acceptor phase. This must be considered in any morphology-function models. Here, it is confirmed that high-performing solution-processed indacenodithienothiophene-based NFAs, i.e., ITIC and its derivatives ITIC-M, ITIC-2F, and ITIC-Th, exhibit at least two crystalline forms. In addition to highly ordered polymorphs that form at high temperatures, NFAs arrange into a low-temperature metastable phase that is readily promoted via solution processing and leads to the highest device efficiencies. Intriguingly, the low-temperature forms seem to feature a continuous network that favors charge transport despite of a poorly order along the π–π stacking direction. As the optical absorption of the structurally more disordered low-temperature phase can surpass that of the more ordered polymorphs while displaying comparable—or even higher—charge transport properties, it is argued that such a packing structure is an important feature for reaching highest device efficiencies, thus, providing guidelines for future materials design and crystal engineering activities., This work was supported by the Ministerio de Ciencia e Innovacion/FEDER (under Ref. PGC2018-094620-A-I00 and PGC2018-095411-B-I00, CEX2019-000917-S, and PGC2018-095411-B-100) and the Basque Country Government (Ref. PIBA19-0051). S.M. is grateful to POLYMAT for the doctoral scholarship. The authors thank A. Arbe, A. Alonso-Mateo, and L. Hueso for their support and access to characterization tools. The authors also thank the technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). GIWAXS experiments were performed at BL11 NCD-SWEET beamline at ALBA Synchrotron (Spain) with the collaboration of ALBA staff. J.M and E.F.-G. acknowledge support through the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN 01-2018-2020 (FET-Open Challenging Current Thinking), “LION-HEARTED,” Grant Agreement No. 828984. J.M and N.S. would like to thank the financial support provided by the IONBIKE RISE project, which received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 823989. N.S., A.K., and A.B. furthermore are grateful to the U.S. National Science Foundation (NSF) for support via Project No. 1905901 within NSF's Division of Materials Research. A.S. and M.C. acknowledge financial support by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program “HEROIC,” Grant Agreement No. 638059. This work was partially carried out at Polifab, the micro- and nanotechnology center of the Politecnico di Milano. C.M. thanks the Knut and Alice Wallenberg Foundation for funding through the project “Mastering Morphology for Solution-borne Electronics.” A.I. thanks MICINN for a Personal Técnico de Apoyo contract (PTA2017-14359-I) and gratefully acknowledge the financial support of the Basque Government (Research Groups IT-1175-19) and the MICINN (PGC2018-094548-B-I00, MCIU/AEI/FEDER, UE. Funding for open access charge: Universidade da Coruña/CISUG., Gobierno Vasco; PIBA19-0051, Gobierno Vasco; IT-1175-19, Estados Unidos. National Science Foundation; 1905901
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mesoscale dynamics in melts of single-chain Polymeric Nanoparticles

  • Arbe, Arantxa
  • Rubio-Cervilla, Jon
  • Alegría, Ángel
  • Moreno Segurado, Ángel J.
  • Pomposo, José A.
  • Robles-Hernández, Beatriz
  • Malo de Molina, Paula
  • Fouquet, Peter
  • Juranyi, Fanni
  • Colmenero de León, Juan
Through a combination of neutron scattering, dielectric spectroscopy, and rheological measurements we study the impact of purely intramolecular cross-linking on a melt fully made of polymeric single-chain nanoparticles (SCNPs) - a novel class of ultrasoft nano-objects. While the α-relaxation is unaffected with respect to the reference melt of linear chains, the emerging polymer/colloid duality of SCNPs leads to the almost complete smearing out of the rubbery plateau. This is the opposite effect to the creation of a permanent 3D network by intermolecular bonds. In addition, neutron scattering shows that a new relaxation mechanism slower than the α-relaxation appears at intermediate length scales. These are beyond the interchain distance but yet far from the hydrodynamic regime. This new slow relaxation - also detected by dielectric spectroscopy - contributes to the hierarchy of processes needed for the full relaxation of the SCNP melt and is tentatively related to the heterogeneities provoked by the internal multiloop topology of the SCNPs and the segregation of their internal domains., The authors gratefully acknowledge the financial support of the BasqueGovernment, code IT-1175-19, and the Ministerio de Economia y Competitividad, code PGC2018-094548-B-I00 (MINECO/FEDER, UE). This work is based on experiments performed at the FOCUS instrument operated by the Swiss Spallation Neutron Source SINQ, Paul Scherrer Institute, Villigen, Switzerland, and has been supported by the European Commission under the seventh Framework Programme through the “Research Infrastructures” action of the“Capacities” Programme, NMI3-II Grant Number 283883.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable properties of MAPLE-Deposited thin films in the presence of suppressed segmental dynamics

  • Wang, Yucheng
  • Gu, Kaichen
  • Monnier, Xavier
  • Chowdhury, Mithun
  • Cangialosi, Daniele
  • Loo, Yueh-Lin
  • Priestley, Rodney D.
Processing polymer thin films by physical vapor deposition has been a major challenge due to material degradation. This challenge has limited our understanding of morphological control by top-down approaches that can be crucial for many applications. Recently, matrix-assisted pulsed laser evaporation (MAPLE) has emerged as an alternative route to fabricate polymer thin films from near-gas phase growth conditions. In this Letter, we investigate how this approach can result in a stable two-phase film structure of semicrystalline polymers via a unique combination of MAPLE and flash calorimetry. In the case of MAPLE-deposited poly(ethylene oxide) (PEO) thin films, we find a 35 °C enhancement in the glass transition temperature relative to melt-crystallized films, which is associated with irreversible chain adsorption in the amorphous region of the film. Remarkably, by varying substrate temperature during deposition, we reveal the ability to significantly tune the crystal orientation, extent of crystallinity, and lamellar thickness of MAPLE-deposited PEO thin films., We acknowledge financial support from the National Science Foundation (NSF) Materials Research Science and Engineering Center Program through the Princeton Center for Complex Materials (DMR-1420541). K.G. and Y.-L.L. acknowledge the support of ExxonMobil through its membership in Princeton E-filliates Partnership of the Andlinger Center for Energy and the Environment. D.C. acknowledges financial support from the Project PGC2018-094548-B-I00 (MICINN-Spain and FEDER-UE) and the Project IT-1175-19 (Basque Government). R.D.P. and D.C. acknowledge the financial support of Princeton University via the International Fund program. A portion of this work was conducted at the Cornell High Energy Synchrotron Source (CHESS), which is supported by the National Science Foundation and the National Institutes of Health/National Institute of General Medical Sciences under NSF Award DMR-1332208., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Human importin α3 and its N-terminal truncated form, without the importin-β-binding domain, are oligomeric species with a low conformational stability in solution

  • Díaz-García, Clara
  • Hornos, Felipe
  • Giudici, A. Marcela
  • Cámara-Artigas, Ana
  • Luque-Ortega, Juan Román
  • Arbe, Arantxa
  • Rizzuti, Bruno
  • Alfonso, Carlos
  • Forwood, Jade K.
  • Iovanna, Juan Lucio
  • Gómez, Javier
  • Prieto, Manuel
  • Coutinho, Ana
  • Neira, José L.
[Background]: Eukaryotic cells have a continuous transit of macromolecules between the cytoplasm and the nucleus. Several carrier proteins are involved in this transport. One of them is importin α, which must form a complex with importin β to accomplish its function, by domain-swapping its 60-residue-long N terminus. There are several human isoforms of importin α; among them, importin α3 has a particularly high flexibility., [Methods]: We studied the conformational stability of intact importin α3 (Impα3) and its truncated form, where the 64-residue-long, N-terminal importin-β-binding domain (IBB) has been removed (ΔImpα3), in a wide pH range, with several spectroscopic, biophysical, biochemical methods and with molecular dynamics (MD)., [Results]: Both species acquired native-like structure between pH 7 and 10.0, where Impα3 was a dimer (with an apparent self-association constant of ~10 μM) and ΔImpα3 had a higher tendency to self-associate than the intact species. The acquisition of secondary, tertiary and quaternary structure, and the burial of hydrophobic patches, occurred concomitantly. Both proteins unfolded irreversibly at physiological pH, by using either temperature or chemical denaturants, through several partially folded intermediates. The MD simulations support the presence of these intermediates., [Conclusions]: The thermal stability of Impα3 at physiological pH was very low, but was higher than that of ΔImpα3. Both proteins were stable in a narrow pH range, and they unfolded at physiological pH populating several intermediate species., [General significance]: The low conformational stability explains the flexibility of Impα3, which is needed to carry out its recognition of complex cargo sequences., This work was supported by Spanish Ministry of Economy and Competitiveness and European FEDER Funds (MCIU/AEI/FEDER, EU) [RTI2018-097991-B-I00 to JLN and JG, BFU2016-75471-C2-1-P to CA, PGC2018-094548-B-I00 to AA and BIO2016-78020-R to ACA], Basque Country [IT-1175-19 to AA], GVA and EU-FEDER funds “Una forma de hacer Europa” [GVA-IDIFEDER 2018/020] and Portuguese FCT [UIDB/04565/2020 and SAICTPAC/0019/2015 to AC and MP]. AUC SV assays were performed at the Molecular Interactions Facility at the CIB Margarita Salas. CD-G acknowledges Medical Biochemistry and Biophysics Doctoral Programme (M2B-PhD) FCT reference: SFRH/PD/BD/135154/2017. BR acknowledges the kind hospitality and use of computational resources in the European Magnetic Resonance Center (CERM), Sesto Fiorentino (Florence), Italy., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How does microstructural design affect the dynamics and rheology of segmented polyurethanes?

  • Heydarnezhad, Hamid Reza
  • Mohammadi, Naser
  • Arbe, Arantxa
  • Alegría, Ángel
To molecularly investigate the role of the microstructure in controlling the dynamics of segmented polyurethanes (PUs), a series of them were systematically designed, synthesized, and experimentally scrutinized. Broadband dielectric spectroscopy and rheometry along with small-angle X-ray scattering and differential scanning calorimetry were applied to provide insights into molecular origins, particularly the role of transitional friction coefficients (ζ), affecting dynamics and rheology of the various microstructures of PUs. In this way, first, the effective ζs of model PUs were extracted from their rheological data using the Bueche-Ferry procedure. Second, the experienced ζ by the hard and soft segments (SS and HS) in pure components and resultant PUs were calculated using BDS data and were applied in a Rouse model based methodology to estimate the effective ζ. Finally, the obtained effective ζ from rheometry (ζeff) and BDS (ζeffRouse) were compared at the same temperatures. For highly microphase-mixed system with liquid-like terminal behavior, ζeffRouse was consistent with ζeff. For microphase-separated PUs with their nonterminal behavior, however, a fairly large difference between ζeff and ζeffRouse was found. A universal curve was also prepared to illustrate the relationship between the dynamics and microstructural features of model PUs. According to these results and the SAXS data analyses, the frictional forces acting at the interfaces between SS-rich and HS-rich phases were suggested as a main origin for the deviation from terminal Rouse-like dynamics in the microphase-separated PUs, while bare friction coefficients in their pure components play an insignificant role in the dynamics of these systems., The authors gratefully acknowledge the financial support of the Basque Government code: IT-1175-19 and the Ministerio de Ciencia, Innovacion y Universidades code: PGC2018-094548- B-I00 (MCIU/AEI/FEDER, UE). We thank Dr. Amaia Iturrospe for her help with the SAXS experiments, Dr. Isabel Asenjo-Sanz in the chemistry synthesis laboratory of CFM, Dr. Silvia Arrese-Igor in the dielectric spectroscopy lab of CFM, and Mr. Mahdi Shahrooz (Ph.D. student) in the College of Engineering and Science of Victoria University Melbourne for valuable discussion about the SAXS data analysis.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Signature of hydrogen bonding association in the dielectric signal of polyalcohols

  • Arrese-Igor, Silvia
  • Alegría, Ángel
  • Colmenero de León, Juan
The recent measurement of what could be interpreted as the signature of hydrogen bond switching in 2-ethyl-1-hexanol monoalcohol [J. Mol. Liq 312(2020)113441] has open again the question about the impact of hydrogen bonds dynamics on the dielectric response of hydrogen bonded liquids. A systematic study of the shear and dielectric response on a series of diverse glass forming systems shows that when comparing the timescales of the dielectric α relaxation and the shear structural relaxation, the dielectric relaxation of 2-ethyl-1,3-hexanediol and glycerol polyalcohols (PA) do not conform to the general trend. Instead, the observed dielectric relaxation for these PAs correlates with a low frequency mode (slower than structural relaxation) emerging in the shear response. We interpret this finding as a signature of the contribution of hydrogen bonds to the relaxation of the polarization. The dielectric response of PAs would then contain overlapped and non-resolved contributions from structural (alpha) relaxation and hydrogen bond dynamics, causing the slowing down of the overall signal relative to the structural relaxation observed by shear measurements., We acknowledge financial support from the projects: PGC2018- 094548-B-I00 by the Spanish Ministry “Ministerio de Ciencia, Innovación y Universidades” (MICINN-Spain) and FEDER-UE; and IT-1175-19 by the Basque Government.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tube dilation in isofrictional polymer blends based on polyisoprene with different topologies: Combination of dielectric and rheological spectroscopy, pulsed-Field-gradient NMR, and neutron Spin Echo (NSE) techniques

  • Malo de Molina, Paula
  • Alegría, Ángel
  • Allgaier, Jürgen
  • Kruteva, Margarita
  • Hoffmann, Ingo
  • Prévost, Sylvain
  • Monkenbusch, Michael
  • Richter, Dieter
  • Arbe, Arantxa
  • Colmenero de León, Juan
We address the dynamics of isofrictional bimodal polyisoprene (PI) blends and emphasize the effect of concentration and topology of the short component on the dynamics of the long-chain component. The experiments were performed on blends of long well-entangled linear chains with shorter linear and star-branched chains varying systematically the concentration of the short component (additive). Small-angle neutron scattering showed that the conformation of the long chains does not change either with concentration or with the additive topology. Applying different spectroscopic techniques, we studied the terminal times of both the long chain and the additives. Thereby, the dielectric and viscoelastic terminal times for the long-chain dynamics, as well as the diffusion times deduced from pulsed-field-gradient (PFG)-NMR measurements, follow the same scaling behavior as a function of the volume fraction of the long chains (φL). For the case of the linear additive, the scaling τL ∼φL is observed in the full concentration range covered (0.1 ≤ φL ≤ 1). In the case of the star additives, deviations from this scaling law are evident at φL ≲ 0.4. The zero-shear viscosity scales as η0 ∼φL3 for φL ≳ 0.4. Deviations are observed at lower values of φL for both additive topologies. On the other hand, the terminal relaxation time of the short chain or the arm retraction time for the stars obtained from dielectric spectroscopy (DS) is only weakly affected by blending and stays nearly constant over the full concentration range. However, the diffusion times of both types of additives depend significantly on φL. Finally, measuring the dynamic structure factor by neutron spin echo (NSE), we directly observe the process of constraint removal at the molecular scale. These results are discussed in terms of the different theoretical approaches available. Thereby, the nearly quantitative agreement of the rheological results with the Read extension of the Viovy theory for long-chain volume fractions φL ≥ 0.5 is emphasized. On the other hand, the low φL results cannot be accounted for. Also, predictions of the tension equilibration mechanism leading to an enhanced φL-dependence are not supported by our data., Authors from the Materials Physics Center (San Sebastian)́ gratefully acknowledge the financial support of the Basque Government, code IT-1175-19, and the Ministerio de Ciencia, Innovacion y Universidades, code PGC2018-094548-B-I00 ́ (MCIU/AEI/FEDER, UE). P.M.d.M. gratefully acknowledges the financial support provided by the SoftComp Consortium for a research visit at Forschungszentrum Jülich, Germany
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-chain nanoparticles: opportunities provided by internal and external confinement

  • Verde-Sesto, Ester
  • Arbe, Arantxa
  • Moreno Segurado, Ángel J.
  • Cangialosi, Daniele
  • Alegría, Ángel
  • Colmenero de León, Juan
  • Pomposo, José A.
In recent decades, self-confinement effects arising from the folding of individual synthetic polymer chains to single-chain nanoparticles (SCNPs) have been exploited for the construction of efficient enzyme-mimetic catalysts, improved drug delivery nanosystems and innovative sensing nanomaterials, among other uses. Remarkably, the imperfect folding of a unimolecular synthetic chain to a functional soft nano-object resembles – to some extent – the folding of a protein to its native, functional state. However, the huge possibilities that can be deployed by determining how external confinement modulates the structure, dynamics and properties of SCNPs have not been totally appreciated yet. In this article, after considering the opportunites that internal confinement in SCNPs offers for catalysis; encapsulation, transport and delivery of therapeutic cargos; and sensing, targeting and bioimaging applications, as well as other diverse advanced applications, we try to provide a unifying vision of what is the expected effect of external confinement – as imposed under different geometrical constraints as well as in solution, in the melt state, on surfaces and in membranes – on the size, shape and, hence, potential functionality/foreseen applications of SCNPs. We anticipate a plethora of opportunities that open up arising from external confinement of SCNPs: from innovative purification techniques and improved all-polymer nanocomposites, to smart responsive surfaces and new topological nanostructures., We gratefully acknowledge funding by Gipuzkoako Foru Aldundia – Programa Red Gipuzkoana de Ciencia, Tecnología e Innovación 2019, grant number 2019-CIEN-000050-01; Basque Government, grant number IT-1175-19; and MCIU/AEI/FEDER, UE, grant number PGC2018-094548-B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure and dynamics of irreversible single-chain nanoparticles in dilute solution. A neutron scattering investigation

  • González-Burgos, Marina
  • Asenjo-Sanz, Isabel
  • Pomposo, José A.
  • Radulescu, Aurel
  • Ivanova, Oxana
  • Pasini, Stefano
  • Arbe, Arantxa
  • Colmenero de León, Juan
We present a small-angle neutron scattering (SANS) and neutron spin echo investigation on the structure and dynamics of irreversible single-chain nanoparticles (SCNPs) in dilute solution. SCNPs are ultra-small soft nano-objects obtained by intramolecular folding/collapse of individual linear polymer chains (precursors). SANS has demonstrated the compaction of macromolecules upon creation of internal cross-links, although their conformation is far from a globular topology. To describe the dynamic structure factor of the SCNPs in solution, we have taken into account their dual polymer/nanoparticle character and applied theoretical approximations based on the Zimm model. The study reveals relaxation of internal degrees of freedom but clearly slowed down with respect to the precursor counterparts. This effect is attributed to the internal friction associated to the compartmentation in domains within the macromolecule. We discuss the structural and dynamical similarities of SCNPs with disordered proteins, in particular with intrinsically disordered proteins. The high internal friction in both cases seems to be associated to the existence of internal domains., The authors gratefully acknowledge the financial support of the Basque Government, code: IT-1175-19 and the Ministerio de Economı́a y Competitividad code: PGC2018-094548-B-I00 (MCIU/AEI/FEDER, UE). This work is based on experiments performed at KWS-2 and J-NSE (Heinz Maier-Leibnitz Zentrum (MLZ), Garching, Germany) and has been supported by the European Commission under the 7th Framework Programme through the “Research Infrastructures” action of the “Capacities” Programme, NMI3-II grant number 283883., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Concentration fluctuations and nanosegregation in a simplified industrial blend with large dynamic asymmetry

  • Gambino, Thomas
  • Shafqat, Numera
  • Alegría, Ángel
  • Malicki, Nicolas
  • Dronet, Séverin
  • Radulescu, Aurel
  • Nemkovski, Kirill
  • Arbe, Arantxa
  • Colmenero de León, Juan
Applying small-angle neutron scattering (SANS) on isotopically labeled samples, we have characterized the thermally driven concentration fluctuations (TCFs), one of the main factors in the phenomenology of blend dynamics, in mixtures of styrene–butadiene rubber (SBR) and oligomers of polystyrene (PS) with different compositions. This system displays a large dynamic asymmetry and is thus a good model to explore the tunability of properties of interest in the rubber industry. The SANS experiments, complemented with neutron diffraction with polarization analysis, have allowed one to determine the UCST behavior of the blend and establish its phase diagram. We find a close vicinity of the spinodal and vitrification lines for intermediate concentrations and samples rich in PS. This induces the freezing of the correlation length for TCF when decreasing the temperature and also has an impact on the reported dielectric response of these mixtures. Furthermore, we have deduced the relevant length scale for segmental relaxation from the comparison of SANS and dielectric results. The values found (≈1.5–2 nm) are close to the Kuhn lengths of the components. The relevance of nanometric length scales in this system could also be tentatively attributed to an underlying nanodomain structure associated with the segregation of phenyl rings and main chains, supported by complementary X-ray diffraction experiments., The authors gratefully acknowledge the financial support of the Basque Government, code: IT-1175-19, and the Ministerio de Economı́a y Competitividad, code: PGC2018-094548-B-I00 (MCIU/AEI/FEDER, UE). This work was based on experiments performed at KWS-2 and DNS (Heinz Maier-Leibnitz Zentrum (MLZ), Garching, Germany) and was supported by the European Commission under the 7th Framework Programme through the “Research Infrastructures” action of the “Capacities” Programme, NMI3-II Grant Number 283883., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coherent structural relaxation of water from meso- to intermolecular scales measured using neutron spectroscopy with polarization analysis

  • Arbe, Arantxa
  • Nilsen, Gøran J.
  • Stewart, J. R.
  • Álvarez González, Fernando
  • García Sakai, Victoria
  • Colmenero de León, Juan
By means of the recent implementation of neutron polarization analysis on a wide-angle time-of-flight spectrometer, we have been able to separately measure coherent and incoherent dynamic structure factors of heavy water with sub-meV resolution in a wide scattering vector (Q) range. The observed decorrelation of collective fluctuations at mesoscales hardly depends on Q. In the crossover towards intermolecular scales, the coherent dynamics is nicely described by the convolution of a Q-independent mode and diffusion, in addition to collective excitations., Authors from the Materials Physics Center (San Sebastián) gratefully acknowledge the financial support of the Eusko Jaurlaritza, code IT-1175-19, and the Ministerio de Economía y Competitividad code PGC2018-094548-B-I00 (MCIU/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Collective motions and mechanical response of a bulk of single-chain nano-particles synthesized by click-chemistry

  • Maiz, Jon
  • Verde-Sesto, Ester
  • Asenjo-Sanz, Isabel
  • Fouquet, Peter
  • Porcar, Lionel
  • Pomposo, José A.
  • Malo de Molina, Paula
  • Arbe, Arantxa
  • Colmenero de León, Juan
This article belongs to the Special Issue Single-Chain Polymer Nanotechnology., We investigate the effect of intra-molecular cross-links on the properties of polymer bulks. To do this, we apply a combination of thermal, rheological, diffraction, and neutron spin echo experiments covering the inter-molecular as well as the intermediate length scales to melts of single-chain nano-particles (SCNPs) obtained through ‘click’ chemistry. The comparison with the results obtained in a bulk of the corresponding linear precursor chains (prior to intra-molecular reaction) and in a bulk of SCNPs obtained through azide photodecomposition process shows that internal cross-links do not influence the average inter-molecular distances in the melt, but have a profound impact at intermediate length scales. This manifests in the structure, through the emergence of heterogeneities at nanometric scale, and also in the dynamics, leading to a more complex relaxation behavior including processes that allow relaxation of the internal domains. The influence of the nature of the internal bonds is reflected in the structural relaxation that is slowed down if bulky cross-linking agents are used. We also found that any residual amount of cross-links is critical for the rheological behavior, which can vary from an almost entanglement-free polymer bulk to a gel. The presence of such inter-molecular cross-links additionally hinders the decay of density fluctuations at intermediate length scales., This research was funded by the Basque Government, code: IT-1175-19 and the Ministerio de Economía y Competitividad code: PGC2018-094548-B-I00 (MCIU/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cyclic polyethylene glycol as nanoparticle surface ligand

  • Aboudzadeh, M. Ali
  • Iturrospe, Amaia
  • Arbe, Arantxa
  • Grzelczak, Marek
  • Barroso-Bujans, Fabienne
Cyclic polymers behave different than linear polymers due to the lack of end groups and smaller coil dimensions. Herein, we demonstrate that cyclic polyethylene glycol (PEG) can be used as an alternative of classical linear PEG ligands for gold nanoparticle (AuNP) stabilization. We observed that the brush height of cyclic PEG on AuNPs of diameter 4.4 and 13.2 nm increases identically as that of linear brushes with (Nσ1/2)0.7 (N, number of monomers in a chain and σ, grafting density) and that cyclic brushes are more stretched than their linear analogues when compared to their unperturbed dimensions. Such structural effect and the reduced footprint diameter in cyclic brushes with the entire chain in a concentrated polymer brush regime explains the distinct response of NPs to ionic strength and temperature, respectively, compared to linear analogues. These experiments are an important step in understanding the effect of polymer brush topology on colloidal properties., We gratefully acknowledge support from the Spanish Ministry “Ministerio de Ciencia, Innovación y Universidades” (PGC2018-094548-B-I00, MICIU/AEI/FEDER, UE), Basque Government (IT-1175-19 and PIBA 2018-34) and Diputación Foral de Guipúzcoa (RED 2018)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct observation of desorption of a melt of long polymer chains

  • Monnier, Xavier
  • Napolitano, Simone
  • Cangialosi, Daniele
Tuning the thermodynamic state of a material has a tremendous impact on its performance. In the case of polymers placed in proximity of a solid wall, this is possible by annealing above the glass transition temperature, Tg, which induces the formation of an adsorbed layer. Whether heating to higher temperatures would result in desorption, thereby reverting the thermodynamic state of the interface, has so far remained elusive, due to the interference of degradation. Here, we employ fast scanning calorimetry, allowing to investigate the thermodynamics of the interface while heating at 104 K s−1. We show that applying such rate to adsorbed polymer layers permits avoiding degradation and, therefore, we provide clear-cut evidence of desorption of a polymer melt. We found that the enthalpy and temperature of desorption are independent of the annealing temperature, which, in analogy to crystallization/melting, indicates that adsorption/desorption is a first order thermodynamic transition., D.C. acknowledges financial support from the project PGC2018-094548-B-I00 (MICINN-Spain and FEDER–UE) and the project IT-1175-19 (Basque Government). S.N. acknowledges financial supports from the Action Concertée Recherche-ULB under project SADI and the Fonds de la Recherche Scientifique FNRS under Grant EXOTICAGE., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of paclitaxel in the water dynamics of MCF-7 breast cancer cells revealed by dielectric spectroscopy

  • Martins, Murillo L.
  • Bordallo, Heloisa N.
  • Arrese-Igor, Silvia
  • Alegría, Ángel
  • Colmenero de León, Juan
Using dielectric spectroscopy experiments performed at multiple temperatures and frequency ranges, we demonstrate how the chemotherapy drug paclitaxel changes the dynamic properties of water in a breast cancer cell line (MCF-7). From the measured data, we present evidence that treatment with paclitaxel leads to a slight increase in activation energy in a relaxation related to bulk-like water. More importantly, we also observe that paclitaxel changes the constraining imposed by the biological interfaces on hydration water, whose single-particle dynamics becomes slower and with higher activation energy. These variations are only observable after freezing the dynamics from other cellular components, such as proteins and DNAs, regardless of the state of the cells, that is, treated or not treated or even if the cells are no longer viable. Therefore, changes in water dynamics could be detected prior to those related to the global dynamics within the cellular environment., They acknowledge the financial support from the European Union’s Horizon 2020 research and innovation programme (grant agreement 731019—EUSMI). M.L.M. is funded by FAPEG (20171026700070) and CNPQ (205609/2014-7 and 300509/2017-0). S.A.I., AA, and J.C.L. also acknowledge the financial support from IT-1175-19 and Ministerio de Ciencia, Innovación y Universidades, project: PGC2018-094548-B-I00 (MCIU/AEI/FEDER UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evidence of nanostructure development from the molecular dynamics of poly(pentamethylene 2,5-furanoate)

  • Martínez-Tong, Daniel E.
  • Soccio, Michelina
  • Robles-Hernández, Beatriz
  • Guidotti, Giulia
  • Gazzano, Massimo
  • Lotti, Nadia
  • Alegría, Ángel
We report on the molecular origin of poly(pentamethylene 2,5-furanoate)’s particular physical properties. From the structural point of view, we found that this polymer can develop crystallinity when stored under room conditions for months. On the other hand, we used broadband dielectric spectroscopy measurements to analyze in great detail the local and segmental molecular dynamics of the material subjected to several thermal treatments. In this way, we evidenced that the molecular dynamics are sensitive to thermal history over a broad temperature range. This behavior has been attributed to possible interchain interactions detected via infrared spectroscopy and rheology measurements in the noncrystallized polymer., A.A. acknowledges funding from Spanish Government ‘‘Ministerio de Ciencia, Innovacion y Universidades’’ (PGC2018-094548-B-I00 (MCIU/AEI/FEDER, UE)). A.A. and B.R.-H. acknowledge funding by Basque Government (IT-1175-19). D.E.M.-T. acknowledges the financial support obtained by the MCIU fellowship “Juan de la Cierva—Incorporación” (IJCI-2017-31600). This research was funded by the European Union: EUSMI, H2020-INFRAIA-2016-1, PROJECT 731019, via proposals E171100043 and E171100040. Authors acknowledge Dr. Elodie Limousin assistance for preparation of PPeF cross-sections. The authors thank Dr. Amaia Iturrospe for assistance in X-ray scattering measurements and Dr. Silvia Arrese-Igor for assistance in FTIR measurements. This publication is based upon work from Cost Action FUR4Sustain, supported by COST., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insight into the structure and dynamics of polymers by neutron scattering combined with atomistic molecular dynamics simulations

  • Arbe, Arantxa
  • Álvarez González, Fernando
  • Colmenero de León, Juan
This article belongs to the Special Issue State-of-the-Art Polymer Science and Technology in Spain (2020,2021)., Combining neutron scattering and fully atomistic molecular dynamics simulations allows unraveling structural and dynamical features of polymer melts at different length scales, mainly in the intermolecular and monomeric range. Here we present the methodology developed by us and the results of its application during the last years in a variety of polymers. This methodology is based on two pillars: (i) both techniques cover approximately the same length and time scales and (ii) the classical van Hove formalism allows easily calculating the magnitudes measured by neutron scattering from the simulated atomic trajectories. By direct comparison with experimental results, the simulated cell is validated. Thereafter, the information of the simulations can be exploited, calculating magnitudes that are experimentally inaccessible or extending the parameters range beyond the experimental capabilities. We show how detailed microscopic insight on structural features and dynamical processes of various kinds has been gained in polymeric systems with different degrees of complexity, and how intriguing questions as the collective behavior at intermediate length scales have been faced., This research was funded by the Basque Government, code: IT-1175-19 and the Ministerio de Economía y Competitividad code: PGC2018-094548-B-I00 (MCIU/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physical aging and glass transition of the rigid amorphous fraction in poly(l-lactic acid)

  • Monnier, Xavier
  • Cavallo, Dario
  • Righetti, Maria Cristina
  • Di Lorenzo, Maria Laura
  • Marina, Sara
  • Martín, Jaime
  • Cangialosi, Daniele
The semicrystalline state of polymers implies the formation of a noncrystalline interphase beside lamellar crystals known as the rigid amorphous fraction (RAF). This devitrifies on heating at temperatures much higher than the one typical of the bulk-amorphous fraction. Its glass transition and physical aging in the glassy state have thus far remained elusive. Here, we study the RAF glassy dynamics in poly(l-lactic acid) (PLLA) applying recently developed aging thermal protocols based on fast scanning calorimetry (FSC). Specifically, semicrystalline samples are aged in different conditions between the glass transition of mobile amorphous fraction and the crystals’ melting temperature (TM). A distinct endothermic peak at temperatures above that of aging develops with time. We provide compelling evidence that in the initial part of aging the origin of this peak is due to the enthalpy recovery of glassy RAF. At longer aging times, the aging peak is at least partly associated with secondary crystallization. Isochronous experiments at different aging temperatures enable to obtain a fair estimate of the RAF glass transition temperature, whose upper limit is about 135 °C. The proposed method holds the promise of gaining new insights into the elusive glassy dynamics of the RAF of semicrystalline polymers., The authors thank Total Corbion (The Netherlands) for kindly providing PLLA as well as Dr. Barbara Immirzi of IPCB-CNR for GPC analyses. D.C. acknowledges funding from Spanish Government “Ministerio de Ciencia, Innovacion y Universidades” (PGC2018-094548-B-I00 (MCIU/AEI/FEDER, UE)) and Basque Government (IT-1175-19)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self‐reporting of folding and aggregation by orthogonal Hantzsch luminophores within a single polymer chain

  • De-La-Cuesta, Julen
  • Verde-Sesto, Ester
  • Arbe, Arantxa
  • Pomposo, José A.
Self‐reporting fluorescence methods for monitoring folding and aggregation of proteins have a long history in biochemistry. Placing orthogonal luminophores within individual synthetic polymer chains for self‐reporting both folding (i.e., its intramolecular compaction to isolated single‐chain nanoparticles, SCNPs) and unbidden aggregation (i.e., the intermolecular association of SCNPs) remains a great challenge. Herein, a simple and efficient platform to identify both single‐chain compaction and intermolecular aggregation phenomena via photoluminescence is presented based on simultaneous synthesis through Hantzsch ester formation of orthogonal luminophores within the same polymer chain. Starting from non‐luminescent β‐ketoester‐decorated chains, intramolecular compaction is visually detected through fluorescence arising from Hantzsch fluorophores generated as intra‐chain connectors during folding. Complementary, intermolecular association is identified via aggregation‐induced emission (AIE) from orthogonal luminophores displaying intense photoluminescence at redshifted wavelengths after formation of multi‐SCNPs assemblies., We gratefully acknowledge funding by Gipuzkoako Foru Aldundia—Programa Red Gipuzkoana de Ciencia, Tecnología e Innovación 2019‐, grant number 2019‐CIEN‐000050‐01; Basque Government, grant number IT‐1175‐19; and MCIU/ EI/FEDER, UE, grant number PGC2018‐094548‐B‐I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of macrocyclic poly(glycidyl phenyl ether) with an inverted-dipole microstructure via ring closure of two-arm linear precursors obtained by initiation with t-BuP4/water

  • Ochs, Jordan
  • Alegría, Ángel
  • González de San Román, Estíbaliz
  • Grayson, Scott M.
  • Barroso-Bujans, Fabienne
Dipolar microstructure is a property related to the orientation of dipole moments along a polymer chain, which is dependent on how asymmetric monomers are oriented (i.e., regio-order). The control over the dipolar microstructure offers the possibility to monitor single-chain behavior in an electric field thus providing important structural and dynamical information. Using broadband dielectric spectroscopy (BDS), in this study, we first demonstrate that the initiation of glycidyl phenyl ether with the t-BuP4 phosphazene base and water leads to the formation of a polyether composed of two symmetric regioregular subchains with an opposite dipole moment orientation. After modification of hydroxyl end groups into alkyne, macrocyclic poly(glycidyl phenyl ether)s with an inverted-dipole microstructure were synthesized via Glaser coupling. The macrocycles obtained using this strategy display a dielectric normal mode relaxation that specifically reflects the fluctuations of the ring diameter. This important characteristic allowed us to evaluate the macrocyclic chain dynamics by BDS resulting in a dipole relaxation of the ring diameter 1.6 times slower compared to the analogous relaxation in the inverted-dipole linear precursor. These results highlight two main points, the power of BDS in the verification of architectural features of polymers having a net dipole moment component along the chain contour, and the potential of inverted-dipole macrocycles in the study of fundamental physical problems in polymer rings., We gratefully acknowledge support from the Spanish Ministry “Ministerio de Ciencia, Innovación y Universidades” (PGC2018-094548-B-I00, MICIU/FEDER, UE), the Basque Government (IT-1175-19 and PIBA 2018-34), and NSF-MRI 0619770 for MALDI-ToF MS investigations., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Water dynamics and self-assembly of single-chain nanoparticles in concentrated solutions

  • Robles-Hernández, Beatriz
  • González, Edurne
  • Pomposo, José A.
  • Colmenero de León, Juan
  • Alegría, Ángel
Single-chain polymer nanoparticles (SCNPs) are soft nano-objects consisting of uni-macromolecular chains collapsed to a certain degree by intramolecular crosslinking. The similarities between the behaviour of SCNPs and that of intrinsically disordered proteins suggest that SCNPs in concentrated solutions can be used as models to design artificial micro-environments, which mimic many of the general aspects of cellular environments. In this work, the self-assembly into SCNPs of an amphiphilic random copolymer, composed by oligo(ethylene glycol)methyl ether methacrylate (OEGMA) and 2-acetoacetoxy ethyl methacrylate (AEMA), has been investigated by means of the dielectric relaxation of water. Direct evidence of segregation of the AEMA repeating units is provided by comparison with the dielectric relaxation of water in similar solutions of the linear hydrophilic polymer, P(OEGMA). Furthermore, the results of comparative studies with similar water solutions of an amphiphilic block copolymer forming multi-chain micelles support the single-chain character of the self-assembly of the random copolymer. The overall obtained results highlight the suitability of the dielectric spectroscopy to confirm the self-assembly of the amphiphilic random copolymers into globular like core–shell single-chain nanoparticles at a concentration well above the overlap concentration., The authors thank the financial support of the Basque Government, project: IT-1175-19, and the Ministerio de Ciencia, Innovación y Universidades, project: PGC2018-094548-B-I00 (MCIU/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advances in the multi-orthogonal folding of single polymer chains into single-chain nanoparticles

  • Blázquez-Martín, Agustín
  • Verde-Sesto, Ester
  • Moreno Segurado, Ángel J.
  • Arbe, Arantxa
  • Colmenero de León, Juan
  • Pomposo, José A.
This article belongs to the Special Issue Single-Chain Polymer Nanotechnology., The folding of certain proteins (e.g., enzymes) into perfectly defined 3D conformations via multi-orthogonal interactions is critical to their function. Concerning synthetic polymers chains, the “folding” of individual polymer chains at high dilution via intra-chain interactions leads to so-called single-chain nanoparticles (SCNPs). This review article describes the advances carried out in recent years in the folding of single polymer chains into discrete SCNPs via multi-orthogonal interactions using different reactive chemical species where intra-chain bonding only occurs between groups of the same species. First, we summarize results from computer simulations of multi-orthogonally folded SCNPs. Next, we comprehensively review multi-orthogonally folded SCNPs synthesized via either non-covalent bonds or covalent interactions. Finally, we conclude by summarizing recent research about multi-orthogonally folded SCNPs prepared through both reversible (dynamic) and permanent bonds., This research was funded by Gipuzkoako Foru Aldundia -Programa Red Gipuzkoana de Ciencia, Tecnología e Innovación 2019-, grant number 2019-CIEN-000050-01; Basque Government, grant number IT-1175-19; and MCIU/AEI/FEDER, UE, grant number PGC2018-094548-B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High magnetization FeCo nanoparticles for magnetorheological fluids with enhanced response

  • Vadillo, Virginia
  • Gómez, Ainara
  • Berasategi, Joanes
  • Gutiérrez, Jon
  • Insausti, Maite
  • Gil de Muro, Izaskun
  • Garitaonandia, J. S.
  • Arbe, Arantxa
  • Iturrospe, Amaia
  • Bou-Ali, M. Mounir
  • Barandiarán, J.M.
We present results concerning the fabrication of a new magnetorheological fluid with FeCo magnetic nanoparticles (NPs) as magnetic fillers. These NPs have been fabricated by using the chemical reduction technique and show a pure crystalline phase with size ranging among 30–50 nm and high magnetization, 212 ± 2 A m2 kg−1. They agglomerate due to the strong magnetic dipolar interaction among them. These FeCo nanoparticles were used to synthesize a magnetorheological fluid by using oleic acid as surfactant, mineral oil as carrier liquid and Aerosil 300 as additive to control the viscosity of the fluid. The synthesized fluid showed a strong magnetorheological response with increasing shear stress values as the magnetic field intensity increases. Thus, we have measured a superior performance up to 616.7 kA m−1, with a yield stress value of 2729 Pa, and good reversibility after demagnetization process. This value competes with the best ones reported in the most recent literature. We have compared the obtained results with our previous reported ones by using high magnetization Fe NPs fabricated by the electrical explosion of wire method (Fe-EEW)., J. Berasategi, A. Gómez and M. M. Bou-Ali would like to thank the financial support provided by the Basque Government under research project PI-2017-1-0055 and MMMfavIN (KK-2020/00099, Elkartek program). V. Vadillo, J. Gutiérrez, J.M. Barandiarán, M. Insausti and I. Gil de Muro would like to thank the financial support provided also by the Basque Government under PI-2017-1-0043, the MMMfavIN (KK-2020/00099, Elkartek program) and Research Groups (IT1245-19 and IT1226-19) research projects. A. A. and A. I. gratefully acknowledge the financial support of the Basque Government (Research Groups IT-1175-19) and the Ministerio de Economía y Competitividad (PGC2018-094548-B-I00, MCIU/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Triggering forces at the nanoscale: Technologies for single-chain mechanical activation and manipulation

  • Martínez-Tong, Daniel E.
  • Pomposo, José A.
  • Verde-Sesto, Ester
Over the past decades, polymer mechanochemistry has focused on the development and application of advanced force application methods to better understand the mechanochemical response of mechanophores. In this regard, techniques such as ultrasonication and single-molecule force spectroscopy (SMFS) are used to activate and detect up to thousands of chemical events within a polymer single chain, allowing the researchers to probe the mechanochemical reactivity of these stress-responsive motifs. Here, the most recent contributions of the single-molecule force spectroscopy technique to this field are presented, putting emphasis on the fundamental parameters of the technique for triggering specific force responses and on the description of force–extension curves measured for single- and multi-mechanophore polymers. Moreover, new contributions of microscopy-based techniques in the field of polymer mechanochemistry, as well as the potential application of single-chain nanoparticles as mechanoresponsive materials, are highlighted., J.A.P and E.V.-S gratefully acknowledge funding by Gipuzkoako Foru Aldundia-Programa Red Gipuzkoana de Ciencia, Tecnología e Innovación 2019 (Grant No. 2019-CIEN-000050-01); Basque Government (Grant No. IT-1175-19); and MCIU/AEI/FEDER, UE (Grant No. PGC2018-094548-B-I00). E.V.-S acknowledges the Materials Physics Center-MPC for her postdoctoral grant. D.E.M.-T. acknowledges the financial support obtained by the MCIU fellowship “Juan de la Cierva—Incorporación” (IJCI-2017-31600)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-Einstein rheology in segmented polyurethane nanocomposites

  • Heydarnezhad, Hamid Reza
  • Mohammadi, Naser
  • Alegría, Ángel
To provide a fundamental understanding regarding the potential of nanoparticle-induced viscosity reduction in segmented block copolymer-based nanocomposites, the shear rheological behavior of segmented polyurethane/C60 nanocomposites (NPUs) was studied up to 2 wt % C60, and the results were complemented by several dynamic and structural probes. The same microstructural features and dynamical relaxations were revealed for each matrix (PU) and its corresponding NPUs in the absence of deformation, representing the lack of difference in their dynamical behaviors at all studied C60 content. Under shear, however, interesting changes in the terminal rheological properties of PUs were observed in the presence of a C60 nanofiller. An anomalous terminal shear viscosity (η0) reduction was found for microphase-mixed PUs at a low C60 content of up to 0.5 wt %. However, the microphase-mixed NPUs containing a higher C60 content as well as the microphase-separated NPUs showed a higher η0 than their matrices. Slippage at the polymer/C60 interfaces was suggested as a possible mechanism behind the viscosity reduction, which appeared controllable by the degree of microphase separation, the ratio of slip length to the nanoparticle size, and the stiffness of segments. Accordingly, an effective slip length, beff, was considered as the key factor in controlling the observed noncontinuum effects regarding the nanoparticle-induced viscosity reduction in the microphase-mixed PUs. When most C60 nanoparticles of radius r are positioned on the hard segments (HSs) of microphase-mixed PUs, beff/r > 1 can lead to viscosity reduction, while the localization of C60 in the vicinity of soft segments (SSs) increased the matrix’s η0. A semiuniversal curve was also found to roughly estimate the η0 values of various NPUs., The authors gratefully acknowledge the financial support of the Basque Government code: IT-1175-19 and Ministerio de Ciencia, Innovacion y Universidades code: PGC2018-094548-B-I00 (MCIU/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reaching the ideal glass in polymer spheres: Thermodynamics and vibrational density of states

  • Monnier, Xavier
  • Colmenero de León, Juan
  • Wolf, Marcel
  • Cangialosi, Daniele
The existence of an ideal glass and the resolution to the Kauzmann paradox is a long-standing open question in materials science. To address this problem, we exploit the ability of glasses with large interfacial area to access low energy states. We submit aggregates of spheres of a polymeric glass former to aging well below their glass transition temperature, Tg; and characterize their thermodynamic state by calorimetry, and the vibrational density of state (VDOS) by inelastic neutron scattering (INS). We show that, when aged at appropriate temperatures, glassy spheres attain a thermodynamic state corresponding to an ideal glass in time scales of about one day. In this state, the boson peak, underlying the deviation from the Debye level of the VDOS, is essentially suppressed. Our results are discussed in the framework of the link between the macroscopic thermodynamic state of glasses and their vibrational properties., D. C. and J. C. acknowledge financial support from the Project No. PGC2018-094548-B-I00 (MICINN-Spain and FEDER-UE) and the Project No. IT-1175-19 (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Crowding Effects on the Structure and Dynamics of the Intrinsically Disordered Nuclear Chromatin Protein NUPR1

  • Bonucci, Alessio
  • Palomino-Schätzlein, Martina
  • Malo de Molina, Paula
  • Arbe, Arantxa
  • Pierattelli, Roberta
  • Rizzuti, Bruno
  • Iovanna, Juan Lucio
  • Neira, José L.
14 pags., 5 figs., 1 tab., The intracellular environment is crowded with macromolecules, including sugars, proteins and nucleic acids. In the cytoplasm, crowding effects are capable of excluding up to 40% of the volume available to any macromolecule when compared to dilute conditions. NUPR1 is an intrinsically disordered protein (IDP) involved in cell-cycle regulation, stress-cell response, apoptosis processes, DNA binding and repair, chromatin remodeling and transcription. Simulations of molecular crowding predict that IDPs can adopt compact states, as well as more extended conformations under crowding conditions. In this work, we analyzed the conformation and dynamics of NUPR1 in the presence of two synthetic polymers, Ficoll-70 and Dextran-40, which mimic crowding effects in the cells, at two different concentrations (50 and 150 mg/ml). The study was carried out by using a multi-spectroscopic approach, including: site-directed spin labelling electron paramagnetic resonance spectroscopy (SDSL-EPR), nuclear magnetic resonance spectroscopy (NMR), circular dichroism (CD), small angle X-ray scattering (SAXS) and dynamic light scattering (DLS). SDSL-EPR spectra of two spin-labelled mutants indicate that there was binding with the crowders and that the local dynamics of the C and N termini of NUPR1 were partially affected by the crowders. However, the overall disordered nature of NUPR1 did not change substantially in the presence of the crowders, as shown by circular dichroism CD and NMR, and further confirmed by EPR. The changes in the dynamics of the paramagnetic probes appear to be related to preferred local conformations and thus crowding agents partially affect some specific regions, further pinpointing that NUPR1 flexibility has a key physiological role in its activity., This work was supported by Spanish Ministry of Economy and Competitiveness and European ERDF Funds (MCIU/AEI/ FEDER, EU) (RTI 2018-097991-B-I00 to JN and PGC 2018- 094548-B-I00 to AA and PM), and the Basque Government (IT1175-19 to AA and PM).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Glass transition and aging of the rigid amorphous fraction in polymorphic poly(butene-1)

  • Wang, Wei
  • Fenni, Seif Eddine
  • Ma, Zhe
  • Righetti, Maria Cristina
  • Cangialosi, Daniele
  • Di Lorenzo, Maria Laura
  • Cavallo, Dario
The origin of “annealing peaks” in semicrystalline polymers, obtained with aging thermal protocols at temperatures between the glass transition and the melting temperature, and revealed by calorimetry as small endotherms preceding the main melting peak, has been recently debated in the literature. On the one side it is claimed that these small endotherms are related to the melting of defective/thinner crystals, on the other side it is proposed that they can be associated to the enthalpy relaxation of the rigid amorphous fraction (RAF), i.e., that part of the amorphous region directly coupled to the crystalline stems. With this work we aim to contribute to the debate, by exploiting the different thermal properties of the RAF coupled with different crystal modifications of polymorphic poly (butene-1) (PB-1). In this polymer the RAF mobilizes at largely different temperatures when it is coupled with crystals of trigonal Form I, or tetragonal Form II. By exploiting this peculiarity, we performed isochronous aging experiments with differential scanning calorimetry (DSC) on both crystalline phases, in a wide temperature range between the glass transition of the mobile (bulk) amorphous fraction and the onset of crystal melting. An endothermic peak above the aging temperature was typically observed. The trend of the enthalpy of this annealing peak with temperature can be described by a bell-shaped curve, approaching zero recovered enthalpy at temperatures of 100–110 °C, and 40–50 °C for Form I and Form II, respectively. These temperatures coincide with previous literature report about mobilization of PB-1 RAF and are thus identified as the upper limit of the RAF glass transition for the two polymorphs. Isothermal aging experiments as a function of time suggest that the enthalpy recovery of Form I RAF show the typical signature of glassy dynamics, similarly to what occurs for Form II RAF after short aging times. At longer times, the superposition of the polymorphic phase transition and RAF aging changes the kinetics of the recovered enthalpy for the latter polymorph, possibly due to the increased stress at the crystal-amorphous interface and creation of additional RAF in parallel with Form II to Form I transformation. Overall, our results demonstrate that for PB-1, at least within the investigated temperature range, the annealing peaks can be related to the RAF strive to attain thermodynamic equilibrium in its glassy state., W.W. thanks the China Scholarship Council (CSC) for funding his Ph. D scholarship. D.C. acknowledges financial support from the project PGC2018-094548-B-I00 (MICINN-Spain and FEDER-UE) and the project IT-1175-19 (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gold nanoparticles endowed with low-temperature colloidal stability by cyclic polyethylene glycol in ethanol

  • Aboudzadeh, M. Ali
  • Kruse, Joscha
  • Sanromán Iglesias, María
  • Cangialosi, Daniele
  • Alegría, Ángel
  • Grzelczak, Marek
  • Barroso-Bujans, Fabienne
The colloidal stability of metal nanoparticles is tremendously dependent on the thermal behavior of polymer brushes. Neat polyethylene glycol (PEG) presents an unconventional upper critical solution temperature in ethanol, where phase segregation and crystallization coexist. This thermal behavior translated to a PEG brush has serious consequences on the colloidal stability in ethanol of gold nanoparticles (AuNPs) modified with PEG brushes upon cooling. We observed that AuNPs (13 nm diameter) stabilized with conventional linear PEG brushes (Mn = 6 and 11 kg mol−1) in ethanol suffer from reversible phase separation upon a temperature drop over the course of a few hours. However, the use of a polymer brush with cyclic topology as a stabilizer prevents sedimentation, ensuring the colloidal stability in ethanol at −25 °C for, at least, four months. We postulate that temperature-driven collapse of chain brushes promotes the interpenetration of linear chains, causing progressive AuNP sedimentation, a process that is unfavorable for cyclic polymer brushes whose topology prevents chain interpenetration. This study reinforces the notion about the importance of polymer topology on the colloidal stability of AuNPs., We gratefully acknowledge support from the Spanish Ministry “Ministerio de Ciencia, Innovación y Universidades” (PGC2018-094548-B-I00, MICINN/FEDER, UE, and PID2019-111772RB-I00), Basque Government (IT-1175-19 and PIBA 2018-34) and Diputación Foral de Guipúzcoa (RED 2018)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physical aging behavior of a glassy polyether

  • Monnier, Xavier
  • Marina, Sara
  • Lopez de Pariza, Xabier
  • Sardón, Haritz
  • Martín, Jaime
  • Cangialosi, Daniele
This article belongs to the Special Issue Recent Developments on Calorimetry and Thermal Analysis of Polymers and Nanocomposites., The present work aims to provide insights on recent findings indicating the presence of multiple equilibration mechanisms in physical aging of glasses. To this aim, we have investigated a glass forming polyether, poly(1-4 cyclohexane di-methanol) (PCDM), by following the evolution of the enthalpic state during physical aging by fast scanning calorimetry (FSC). The main results of our study indicate that physical aging persists at temperatures way below the glass transition temperature and, in a narrow temperature range, is characterized by a two steps evolution of the enthalpic state. Altogether, our results indicate that the simple old-standing view of physical aging as triggered by the α relaxation does not hold true when aging is carried out deep in the glassy state., D.C. research was funded by MICINN-Spain and FEDER-UE, grant PGC2018-094548-B-I00; and the Basque Government, grant IT-1175-19. J.M. thanks MICINN /FEDER for grant Ref. PGC2018-094620-A-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Significant effect of intra-chain distribution of catalytic sites on catalytic activity in “clickase” single-chain nanoparticles

  • Asenjo-Sanz, Isabel
  • Claros, Tatiana
  • González, Edurne
  • Pinacho-Olaciregui, Jokin
  • Verde-Sesto, Ester
  • Pomposo, José A.
“Clickase” single-chain nanoparticles (Ck-SCNPs) are folded, enzyme-mimetic unimolecular polymeric nano-objects containing copper (Cu) ions able to catalyze the azide-alkyne Huisgen cycloaddition reaction in water and/or selected organic solvents often in the presence of a reductant. Herein, we investigate the effect of morphology on catalytic activity of identical Ck-SCNPs either containing a homogeneous distribution of Cu catalytic sites (Ck-SCNPs1) or showing intra-chain clustering of Cu ions (Ck-SCNPs2). A model fluorogenic “click” reaction between 9-(azidomethyl)anthracene and phenylacetylene, which was catalyzed either by Ck-SCNPs1 or Ck-SCNPs2, was used to unravel the effect of intra-chain clustering on catalytic activity. This work paves the way to improve the catalytic activity of other metallo-folded SCNPs through control of the intra-chain distribution of catalytic sites., This research was supported by Basque Government, grant number IT-1175-19; and MCIU / AEI / FEDER, UE, grant number PGC2018-094548-B-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Disentangling self-atomic motions in polyisobutylene by molecular dynamics simulations

  • Khairy, Yasmin
  • Álvarez González, Fernando
  • Arbe, Arantxa
  • Colmenero de León, Juan
This article belongs to the Section Polymer Physics and Theory., We present fully atomistic molecular dynamics simulations on polyisobutylene (PIB) in a wide temperature range above the glass transition. The cell is validated by direct comparison of magnitudes computed from the simulation and measured by neutron scattering on protonated samples reported in previous works. Once the reliability of the simulation is assured, we exploit the information in the atomic trajectories to characterize the dynamics of the different kinds of atoms in PIB. All of them, including main-chain carbons, show a crossover from Gaussian to non-Gaussian behavior in the intermediate scattering function that can be described in terms of the anomalous jump diffusion model. The full characterization of the methyl-group hydrogen motions requires accounting for rotational motions. We show that the usually assumed statistically independence of rotational and segmental motions fails in this case. We apply the rotational rate distribution model to correlation functions calculated for the relative positions of methyl-group hydrogens with respect to the carbon atom at which they are linked. The contributions to the vibrational density of states are also discussed. We conclude that methyl-group rotations are coupled with the main-chain dynamics. Finally, we revise in the light of the simulations the hypothesis and conclusions made in previously reported neutron scattering investigations on protonated samples trying to address the origin of the dielectric β-process., This research was funded by the Basque Government, code: IT-1175-19 and the Ministerio de Economía y Competitividad code: PGC2018-094548-B-I00 (MCIU/AEI/FEDER, UE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unraveling the coherent dynamic structure factor of liquid water at the mesoscale by molecular dynamics simulations

  • Álvarez González, Fernando
  • Arbe, Arantxa
  • Colmenero de León, Juan
We present an investigation by molecular dynamics (MD)-simulations of the coherent dynamic structure factor, S(Q, t) (Q: momentum transfer), of liquid water at the mesoscale (0.1 Å−1 ≤ Q ≤ Qmax) [Qmax ≈ 2 Å−1: Q-value of the first maximum of the static structure factor, S(Q), of water]. The simulation cell—large enough to address the collective properties at the mesoscale—is validated by direct comparison with recent results on the dynamic structure factor in the frequency domain obtained by neutron spectroscopy with polarization analysis [Arbe et al., Phys. Rev. Res. 2, 022015 (2020)]. We have not only focused on the acoustic excitations but also on the relaxational contributions to S(Q, t). The analysis of the MD-simulation results—including the self- and distinct contributions to the diffusive part of S(Q, t)—nicely explains why the relaxation process hardly depends on Q in the low Q-range (Q ≤ 0.4 Å−1) and how it crosses over to a diffusion-driven process at Q ≈ Qmax. Our simulations also give support to the main assumptions of the model used to fit the experimental data in the above mentioned paper. The application of such a model to the simulation S(Q, t) data delivers (i) results for the relaxation component of S(Q, t) in agreement with those obtained from neutron experiments and (ii) longitudinal and transverse hydrodynamic-like components with similar features than those identified in previous simulations of the longitudinal and transverse current spectra directly. On the other hand, in general, our MD-simulations results of S(Q, t) qualitatively agree with the viscoelastic transition framework habitually used to describe inelastic x-ray scattering results., We acknowledge the grant PGC2018-094548-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe,” as well as Grant Code IT-1175-19 funded by Eusko Jaurlaritza (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High throughput optimization procedure to characterize vitrification kinetics

  • Abate, Anabella A.
  • Cangialosi, Daniele
  • Napolitano, Simone
We present VITRIFAST, a high throughput optimization procedure to characterize the vitrification kinetics based on calorimetric measurements. By analyzing the temperature dependence of specific heat capacity, the method determines the fictive temperature, Tf , and the enthalpy change during physical aging, ΔH, within only a few seconds. We tested VITRIFAST on the low molecular weight glass-former o - terphenyl (OTP) and on an archetypal glass forming polymer, polystyrene (PS), by analyzing the outcome of two classical sets of experi- ments. By means of fast scanning calorimetry (FSC), we characterized the vitrification kinetics in a wide range of cooling rates and the isothermal physical aging after vitrification at a given rate. In less than 3 minutes, our method could process 18 different calorimetric scans and provided values of Tf and ΔH in excellent agreement with those reported in the literature. VITRIFAST can be employed in the analysis of the temperature dependence of any type of second order derivative of free energy and represents a tremendous advance in the data analysis of calorimetric scans. The method is particularly helpful for fast scanning calorimetry users, considering the extremely large number of heat capacity scans recorded by this technique within a few minutes., S. N and A. A. acknowledge financial support from Action Concert Recherche-ULB under project SADI, and the Fonds de la Recherche Scientifique FNRS under Grant T.0184.20 EXOTICAGE. D.C. acknowledges financial support from the project PGC2018-094548-B-I00 (MICINN-Spain and FEDER-UE) and the project IT-1175-19 (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Synthesis routes and crowding effects on single-chain polymeric nanoparticles: combining simulations, neutron and X-ray scattering

  • Moreno Segurado, Ángel J.
Trabajo presentado al CECAM Workshop: "“Combining multi-scale simulation and scattering for structural analysis of complex systems", celebrado on-line el 26 y 27 de enero de 2022., Grant PGC2018-094548-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. Grant IT-1175-19 funded by Eusko Jaurlaritza (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A method to estimate the size of single-chain nanoparticles under severe crowding conditions

  • Asenjo-Sanz, Isabel
  • Verde-Sesto, Ester
  • Pomposo, José A.
Single-chain nanoparticles (SCNPs) result from the folding of isolated polymer chains via intramolecular interactions. Currently, there is no theory able to rationalize the astonishing conformational behaviour of SCNPs under severe crowding conditions (e.g., highly concentrated solutions, all-polymer nanocomposites) and, specifically, the significant size reduction observed in highly crowded solutions of covalent-bonded SCNPs and all-polymer nanocomposites containing SCNPs. Herein, we propose a valuable method to estimate the size of SCNPs under crowding. The method – which is based on combining MD simulations results with scaling concepts – is also useful for ring polymers and nanostructured Janus-shaped SCNPs., Financial support by MCIN/AEI/10.13039/501100011033 and “ERDF – A way of making Europe” (PGC2018-094548-B-I00), Eusko Jaurlaritza – Basque Government (IT-1175-19), and Gipuzkoako Foru Aldundia, Programa Red Gipuzkoana de Ciencia, Tecnología e Innovación (2021-CIEN-000010-01) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Disentangling component dynamics in an all-polymer nanocomposite based on single-chain nanoparticles by quasielastic neutron scattering

  • Maiz, Jon
  • Verde-Sesto, Ester
  • Asenjo-Sanz, Isabel
  • Mangin-Thro, Lucile
  • Frick, Bernhard
  • Pomposo, José A.
  • Arbe, Arantxa
  • Colmenero de León, Juan
We have investigated an all-polymer nanocomposite (NC) consisting of single-chain nanoparticles (SCNPs) immersed in a matrix of linear chains of their precursors (25/75% composition in weight). The SCNPs were previously synthesized via “click” chemistry, which induces intramolecular cross-links in the individual macromolecules accompanied by a slight shift (5–8 K) of the glass transition temperature toward higher values and a broadening of the dynamic response with respect to the raw precursor material. The selective investigation of the dynamics of the NC components has been possible by using properly isotopically labeled materials and applying quasielastic neutron scattering techniques. Results have been analyzed in the momentum transfer range where the coherent scattering contribution is minimal, as determined by complementary neutron diffraction experiments with polarization analysis. We observe the development of dynamic heterogeneity in the intermediate scattering function of the NC components, which grows with increasing time. Local motions in the precursor matrix of the NC are accelerated with respect to the reference bulk behavior, while the displacements of SCNPs’ hydrogens show enhanced deviations from Gaussian and exponential behavior compared with the pure melt of SCNPs. The resulting averaged behavior in the NC coincides with that of the pure precursor, in accordance with the macroscopic observations by differential scanning calorimetry (DSC) experiments., We acknowledge the Grant PGC2018-094548-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. We also acknowledge the financial support of Eusko Jaurlaritza, codes: IT-1175-19 and IT1566-22., The Open Access funding provided by University of Basque Country., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Validity of effective potentials in crowded solutions of linear and ring polymers with reversible bonds

  • Paciolla, Mariarita
  • Likos, Christos N.
  • Moreno Segurado, Ángel J.
We perform simulations to compute the effective potential between the centers-of-mass of two polymers with reversible bonds. We investigate the influence of the topology on the potential by employing linear and ring backbones for the precursor (unbonded) polymer, finding that it leads to qualitatively different effective potentials. In the linear and ring cases the potentials can be described by Gaussians and generalized exponentials, respectively. The interactions are more repulsive for the ring topology, in analogy with known results in the absence of bonding. We also investigate the effect of the specific sequence of the reactive groups along the backbone (periodic or with different degrees of randomness), establishing that it has a significant impact on the effective potentials. When the reactive sites of both polymers are chemically orthogonal so that only intramolecular bonds are possible, the interactions become more repulsive the closer to periodic the sequence is. The opposite effect is found if both polymers have the same types of reactive sites and intermolecular bonds can be formed. We test the validity of the effective potentials in solution, in a broad range of concentrations from high dilution to far above the overlap concentration. For this purpose, we compare simulations of the effective fluid and test particle route calculations with simulations of the real all-monomer system. Very good agreement is found for the reversible linear polymers, indicating that unlike in their nonbonding counterparts many-body effects are minor even far above the overlap concentration. The agreement for the reversible rings is less satisfactory, and at high concentration the real system does not show the clustering behavior predicted by the effective potential. Results similar to the former ones are found for the partial self-correlations in ring/linear mixtures. Finally, we investigate the possibility of creating, at high concentrations, a gel of two interpenetrated reversible networks. For this purpose we simulate a 50/50 two-component mixture of reversible polymers with orthogonal chemistry for the reactive sites, so that intermolecular bonds are only formed between polymers of the same component. As predicted by both the theoretical phase diagram and the simulations of the effective fluid, the two networks in the all-monomer mixture do not interpenetrate, and phase separation (demixing) is observed instead., We acknowledge Grant PGC2018-094548-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. We also acknowledge Grant IT-1175-19 funded by Eusko Jaurlaritza (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Zwitterionic polymerization with B(C6F5)3: a simple access to branched cyclic polyglycidol

  • Barroso-Bujans, Fabienne
Trabajo presentado al GEP-SLAP (XVI Reunión del Grupo Especializado de Polímeros GEP de la Real Sociedad Española de Química (RSEQ) y de la Real Sociedad Española de Física (RSEF) - XVII Simposio Latinoamericano de Polímeros), celebrado en San Sebastián (España) del 8 al 12 de mayo de 2022., MICINN/FEDER, UE, PGC2018-094548-B-I00; Basque Government: IT-1175-19, PIBA 2021-1-34 and Prov. Council of Gipuzkoa: RED 2021:ID44., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bio-based semi-crystalline PEF: Temperature dependence of the constrained amorphous interphase and amorphous chain mobility in relation to crystallization

  • Righetti, Maria Cristina
  • Vannini, Micaela
  • Celli, Annamaria
  • Cangialosi, Daniele
  • Marega, Carla
The temperature dependence of the constrained amorphous interphase or rigid amorphous fraction (RAF) in bio-based semi-crystalline poly(ethylene 2,5-furandicarboxylate) (PEF) was assessed. RAF, which is located in proximity of the basal crystal planes, was found to develop in parallel with the crystal phase during crystallization at the lowest investigated Tcs, i.e. 130 and 140 °C, at which the less stable α′-crystal phase grows. At higher Tcs, RAF does not vitrify during crystallization, but only upon the subsequent cooling down to Tg. The rigid amorphous fraction at Tg increases by decreasing the crystallization temperature, ranging approximately from 15 to 25%. This information is useful for the development of PEF products, since many RAF physical properties, for example mechanical and barrier properties, are different from those of the amorphous fraction far from the crystals. RAF decreases with increasing temperature, and becomes zero around 150 °C. The same temperature limit of 150 °C was found to influence the reversing crystallization/melting process at the lateral crystal surfaces, as well as the crystallization rate, which reaches its maximum at temperatures above 150 °C. In addition, singularly, the more ordered crystalline α-form was found to grow only at temperatures higher than 150 °C. The total absence of constraints on the amorphous segments mobility, identified at temperatures higher than 150 °C, also favors additional crystallization upon heating in the PEF samples crystallized at low Tcs, with also α-crystals development. The densities of the RAF connected to α′- and α-crystals were estimated at room temperature., This article is based upon work from COST Action FUR4Sustain, CA18220, supported by COST (European Cooperation in Science and Technology). XRD measurements were performed with a Bruker AXS D8 ADVANCE Plus diffractometer at the PanLab department facility, founded by the MIUR-“Dipartimenti di Eccellenza” grantNExuS. D.C. acknowledges financial support from the project PGC2018-094548-B-I00 (MICINN-Spain and FEDER-UE) and the project IT-1175-19 (Basque Government)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Decoupling of glassy dynamics from viscosity in thin supported poly(n-butyl methacrylate) films

  • Chowdhury, Mithun
  • Monnier, Xavier
  • Cangialosi, Daniele
  • Priestley, Rodney D.
We utilized fast scanning calorimetry to characterize the glass transition temperature (Tg) and intrinsic molecular mobility of low-molecular-weight poly(n-butyl methacrylate) thin films of varying thicknesses. We found that the Tg and intrinsic molecular mobility were coupled, showing no film thickness-dependent variation. We further employed a unique noncontact capillary nanoshearing technique to directly probe layer-resolved gradients in the rheological response of these films. We found that layer-resolved shear mobility was enhanced with a reduction in film thickness, whereas the effective viscosity decreased. Our results highlight the importance of polymer–substrate attractive interactions and free surface-promoted enhanced mobility, establishing a competitive nanoconfinement effect in poly(n-butyl methacrylate) thin films. Moreover, the findings indicate a decoupling in the thickness-dependent variation of Tg and intrinsic molecular mobility with the mechanical responses (shear mobility and effective viscosity)., M.C. acknowledges support from the Science and Engineering Research Board through the Ramanujan Fellowship (Grant No. SB/S2/RJN-084/2018) and the Early Career Research Award (ECR/2018/001740) of the Department of Science and Technology, India. Additionally, support from IIT Bombay through a SEED grant (RD/0519-IRCCSH0-033) is acknowledged. R.D.P. acknowledges support from the National Science Foundation (NSF) Materials Research Science and Engineering Center Program of the Princeton Center for Complex Materials (grant numbers DMR-1420541 and DMR-2011750) and the NSF through grant number CBET-1706012. D.C. acknowledges MICINN-Spain and FEDER-UE (grant PGC2018-094548-BI00) and the Basque Government (grant IT-1175-19)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Intra- vs intermolecular cross-links in poly(methyl methacrylate) networks containing enamine bonds

  • Sharifi, Soheil
  • Asenjo-Sanz, Isabel
  • Pomposo, José A.
  • Alegría, Ángel
The molecular dynamics of a copolymer composed of methyl methacrylate (MMA) and (2-acetoacetoxy)ethyl methacrylate (AEMA) monomers and the influence on it of intra- to intermolecular cross-links of AEMA units with ethylenediamine (EDA) was studied by combining dielectric relaxation experiments and thermal investigations. The dielectric spectra of the non-cross-linked copolymer show three dynamical processes: a slow relaxation (α) and a faster (β), both dominated by the MMA dynamics, and an even faster secondary relaxation (γ) reflecting the AEMA dynamics. Already for low cross-linking densities, the γ process is very much affected and eventually disappears, increasing the cross-linking density. The secondary β relaxation however was nearly unaffected by cross-linking. The effect of cross-linking on the α relaxation was very pronounced with an important increasing of the glass transition temperature Tg. There was also an increase of the dynamic heterogeneity and the relaxation intensity when increasing the cross-linking density (up to the maximum explored, 9 mol % EDA). The quality of the average time scale and Tg value have similarities in behavior for intra- and intermolecular cross-linking, but clear differences in the dynamic heterogeneities where observed. These differences can be interpreted in connection with the sparse internal structure of the collapsed single chains obtained by intramolecular cross-linking., We gratefully acknowledge Grant PGC2018-094548-B-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, the Grants IT-1175-19 and IT-1566-22 from Eusko Jaurlaritza (Basque Government) and the Open Access funding provided by University of Basque Country., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Simulations of gel formation in reversibly cross-linking polymers: Effective potentials, phase behaviour and viscoelastic response

  • Moreno Segurado, Ángel J.
  • Paciolla, Mariarita
  • Formanek, Maud
  • Gosika, Mounika
  • Likos, Christos N.
  • Zaccarelli, Emanuela
  • Rovigatti, Lorenzo
  • Sciortino, Francesco
Trabajo presentado a la Conferencia del Polymer Networks Group (PNG), celebrada en Roma en junio de 2022., PGC2018-094548-B-I00 (MCIN, Spain) IT-1175-19 (GV, Spain), Peer reviewed