Pasar al contenido principal

FASES VITREAS EN POLIMEROS SEMICONDUCTORES

PGC2018-094620-A-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DEL PAIS VASCO EUSKAL HERRIKO UNIBERTSITATEA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Physical Aging Behavior of a Glassy Polyether

  • Monnier, Xavier
  • Marina, Sara
  • López de Pariza, Xabier
  • Sardón, Haritz
  • Martín, Jaime
  • Cangialosi, Daniele
[Abstract] The present work aims to provide insights on recent findings indicating the presence of multiple equilibration mechanisms in physical aging of glasses. To this aim, we have investigated a glass forming polyether, poly(1-4 cyclohexane di-methanol) (PCDM), by following the evolution of the enthalpic state during physical aging by fast scanning calorimetry (FSC). The main results of our study indicate that physical aging persists at temperatures way below the glass transition temperature and, in a narrow temperature range, is characterized by a two steps evolution of the enthalpic state. Altogether, our results indicate that the simple old-standing view of physical aging as triggered by the α relaxation does not hold true when aging is carried out deep in the glassy state., D.C. research was funded by MICINN-Spain and FEDER-UE, grant PGC2018-094548-B-I00; and the Basque Government, grant IT-1175-19. J.M. thanks MICINN /FEDER for grant Ref. PGC2018-094620-A-I00, Eusko Jaurlaritza; IT-1175-19
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Y6 Organic Thin-Film Transistors with Electron Mobilities of 2.4 cm² V⁻¹ s⁻¹ via Microstructural Tuning

  • Gutiérrez Fernández, Edgar
  • Scaccabarozzi, Alberto D.
  • Basu, Aniruddha
  • Solano, Eduardo
  • Anthopoulos, Thomas D.
  • Martín, Jaime
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] There is a growing demand to attain organic materials with high electron mobility, μe, as current reliable reported values are significantly lower than those exhibited by their hole mobility counterparts. Here, it is shown that a well-known nonfullerene-acceptor commonly used in organic solar cells, that is, BTP-4F (aka Y6), enables solution-processed organic thin-film transistors (OTFT) with a μe as high as 2.4 cm² V⁻¹ s⁻¹. This value is comparable to those of state-of-the-art n-type OTFTs, opening up a plethora of new possibilities for this class of materials in the field of organic electronics. Such efficient charge transport is linked to a readily achievable highly ordered crystalline phase, whose peculiar structural properties are thoroughly discussed. This work proves that structurally ordered nonfullerene acceptors can exhibit intrinsically high mobility and introduces a new approach in the quest of high μe organic materials, as well as new guidelines for future materials design., J.M. thanks MICINN/FEDER for the Ramón y Cajal contract and the grant Ref. PGC2018-094620-A-I00). The Xunta de Galicia is also acknowledged for the grant Proyectos de Consolidación Ref. ED431F 2021/009. J.M and E.G.-F. acknowledge support through the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN-01-2018-2020 (FET-Open Challenging Current Thinking), “LION-HEARTED′, grant agreement no. 828984. J.M would like to thank the financial support provided by the IONBIKE RISE project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 823989. The authors also thank the technical and human support provided by SGIker of UPV/EHU and the European funding (ERDF and ESF), Xunta de Galicia; ED431F 2021/009
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Design Rules for Polymer Blends with High Thermoelectric Performance

  • Zapata-Arteaga, Osnat
  • Marina, Sara
  • Zuo, Guangzheng
  • Xu, Kai
  • Dörling, Bernhard
  • Pérez, Luis Alberto
  • Reparaz, Juan Sebastian
  • Martín, Jaime
  • Kemerink, Martijn
  • Campoy-Quiles, Mariano
[Abstract] A combinatorial study of the effect of in-mixing of various guests on the thermoelectric properties of the host workhorse polymer poly[2,5-bis(3-tetradecylthiophen- 2-yl)thieno[3,2-b]thiophene] (PBTTT) is presented. Specifically, the composition and thickness for doped films of PBTTT blended with different polymers are varied. Some blends at guest weight fractions around 10–15% exhibit up to a fivefold increase in power factor compared to the reference material, leading to zT values around 0.1. Spectroscopic analysis of the charge-transfer species, structural characterization using grazing-incidence wide-angle X-ray scattering, differential scanning calorimetry, Raman, and atomic force microscopy, and Monte Carlo simulations are employed to determine that the key to improved performance is for the guest to promote long-range electrical connectivity and low disorder, together with similar highest occupied molecular orbital levels for both materials in order to ensure electronic connectivity are combined., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa’ Program for Centers of Excellence in R&D (No. CEX2019-000917-S) and projects PGC2018-095411- B-I00, PGC2018-094620-A-I00, and MAT2017-90024-P (TANGENTS)-EI/Fondo Europeo de Desarrollo Regional and from the European Research Council (ERC) under Grant Agreements Nos. 648901 and 963954. J.M. thanks Ministerio de Ciencia, Innovación y Universidades for the Ramón y Cajal contract. The authors are thankful to Dr. Agustín Mihi for access and support with the FTIR equipment. The authors acknowledge the European funding (European Regional Development Fund and European Social Fund). The authors thank Andrés Gómez Rodríguez from the Scanning Probe Microscopy Laboratory (ICMAB-CSIC) for a set of fine AFM measurements. GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. Finally, the authors acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unidad de Recursos de Información Científica para la Investigación (URICI). M.K. thanks the Carl Zeiss Foundation for financial support. G.Z. acknowledges the support from Alexander von Humboldt Foundation
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Polymorphism in Non-Fullerene Acceptors Based on Indacenodithienothiophene

  • Marina, Sara
  • Scaccabarozzi, Alberto D.
  • Gutiérrez Fernández, Edgar
  • Solano, Eduardo
  • Khirbat, Aditi
  • Ciammaruchi, Laura
  • Iturrospe, Amaia
  • Balzer, Alex
  • Yu, Liyang
  • Gabirondo, Elena
  • Monnier, Xavier
  • Sardón, Haritz
  • Anthopoulos, Thomas D.
  • Caironi, Mario
  • Campoy-Quiles, Mariano
  • Müller, Christian
  • Cangialosi, Daniele
  • Stingelin, Natalie
  • Martín, Jaime
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] Organic solar cells incorporating non-fullerene acceptors (NFAs) have reached remarkable power conversion efficiencies of over 18%. Unlike fullerene derivatives, NFAs tend to crystallize from solutions, resulting in bulk heterojunctions that include a crystalline acceptor phase. This must be considered in any morphology-function models. Here, it is confirmed that high-performing solution-processed indacenodithienothiophene-based NFAs, i.e., ITIC and its derivatives ITIC-M, ITIC-2F, and ITIC-Th, exhibit at least two crystalline forms. In addition to highly ordered polymorphs that form at high temperatures, NFAs arrange into a low-temperature metastable phase that is readily promoted via solution processing and leads to the highest device efficiencies. Intriguingly, the low-temperature forms seem to feature a continuous network that favors charge transport despite of a poorly order along the π–π stacking direction. As the optical absorption of the structurally more disordered low-temperature phase can surpass that of the more ordered polymorphs while displaying comparable—or even higher—charge transport properties, it is argued that such a packing structure is an important feature for reaching highest device efficiencies, thus, providing guidelines for future materials design and crystal engineering activities., This work was supported by the Ministerio de Ciencia e Innovacion/FEDER (under Ref. PGC2018-094620-A-I00 and PGC2018-095411-B-I00, CEX2019-000917-S, and PGC2018-095411-B-100) and the Basque Country Government (Ref. PIBA19-0051). S.M. is grateful to POLYMAT for the doctoral scholarship. The authors thank A. Arbe, A. Alonso-Mateo, and L. Hueso for their support and access to characterization tools. The authors also thank the technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). GIWAXS experiments were performed at BL11 NCD-SWEET beamline at ALBA Synchrotron (Spain) with the collaboration of ALBA staff. J.M and E.F.-G. acknowledge support through the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN 01-2018-2020 (FET-Open Challenging Current Thinking), “LION-HEARTED,” Grant Agreement No. 828984. J.M and N.S. would like to thank the financial support provided by the IONBIKE RISE project, which received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie Grant Agreement No. 823989. N.S., A.K., and A.B. furthermore are grateful to the U.S. National Science Foundation (NSF) for support via Project No. 1905901 within NSF's Division of Materials Research. A.S. and M.C. acknowledge financial support by the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program “HEROIC,” Grant Agreement No. 638059. This work was partially carried out at Polifab, the micro- and nanotechnology center of the Politecnico di Milano. C.M. thanks the Knut and Alice Wallenberg Foundation for funding through the project “Mastering Morphology for Solution-borne Electronics.” A.I. thanks MICINN for a Personal Técnico de Apoyo contract (PTA2017-14359-I) and gratefully acknowledge the financial support of the Basque Government (Research Groups IT-1175-19) and the MICINN (PGC2018-094548-B-I00, MCIU/AEI/FEDER, UE. Funding for open access charge: Universidade da Coruña/CISUG., Gobierno Vasco; PIBA19-0051, Gobierno Vasco; IT-1175-19, Estados Unidos. National Science Foundation; 1905901
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Gold(III) Porphyrin Was Used as an Electron Acceptor for Efficient Organic Solar Cells

  • Cuesta, Virginia
  • Singh, Manish Kumar
  • Gutiérrez Fernández, Edgar
  • Martín, Jaime
  • Domínguez, Rocío
  • Cruz, Pilar de la
  • Sharma, G. D
  • Langa, Fernando
[Abstract] The widespread use of nonfullerene-based electron-accepting materials has triggered a rapid increase in the performance of organic photovoltaic devices. However, the number of efficient acceptor compounds available is rather limited, which hinders the discovery of new, high-performing donor:acceptor combinations. Here, we present a new, efficient electron-accepting compound based on a hitherto unexplored family of well-known molecules: gold porphyrins. The electronic properties of our electron-accepting gold porphyrin, named VC10, were studied by UV−Vis spectroscopy and by cyclic voltammetry (CV) , revealing two intense optical absorption bands at 500−600 and 700−920 nm and an optical bandgap of 1.39 eV. Blending VC10 with PTB7-Th, a donor polymer, which gives rise to an absorption band at 550−780 nm complementary to that of VC10, enables the fabrication of organic solar cells (OSCs) featuring a power conversion efficiency of 9.24% and an energy loss of 0.52 eV. Hence, this work establishes a new approach in the search for efficient acceptor molecules for solar cells and new guidelines for future photovoltaic material design, F.L. and P.d.l.C. thank MCI (Spain) (PID2019-105049RB-I00), MICIU (RED2018-102815-T), the Junta de Comunidades de Castilla-La Mancha, and the European Social Fund (SBPLY/17/180501/000254) for financial support. V.C. thanks MECD for an FPU grant (FPU15/02170). G.D.S. thanks the Government of India SERI-DST (DST/TMD/SERI/D05(c)) for financial support. J.M. thanks the MICINN for grant PGC2018-094620-A-I00, Junta de Comunidades de Castilla-La Mancha; SBPLY/17/180501/000254, Government of India; DST/TMD/SERI/D05(c)
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

On The Thermal Conductivity of Conjugated Polymers for Thermoelectrics

  • Rodríguez-Martínez, Xabier
  • Martín, Jaime
  • Campoy-Quiles, Mariano
[Abstract]: The thermal conductivity (κ) governs how heat propagates in a material, and thus is a key parameter that constrains the lifetime of optoelectronic devices and the performance of thermoelectrics (TEs). In organic electronics, understanding what determines κ has been elusive and experimentally challenging. Here, by measuring κ in 17 π-conjugated materials over different spatial directions, it is statistically shown how microstructure unlocks two markedly different thermal transport regimes. κ in long-range ordered polymers follows standard thermal transport theories: improved ordering implies higher κ and increased anisotropy. κ increases with stiffer backbones, higher molecular weights and heavier repeat units. Therein, charge and thermal transport go hand-in-hand and can be decoupled solely via the film texture, as supported by molecular dynamics simulations. In largely amorphous polymers, however, κ correlates negatively with the persistence length and the mass of the repeat unit, and thus an anomalous, albeit useful, behavior is found. Importantly, it is shown that for quasi-amorphous co-polymers (e.g., IDT-BT) κ decreases with increasing charge mobility, yielding a 10-fold enhancement of the TE figure-of-merit ZT compared to semi-crystalline counterparts (under comparable electrical conductivities). Finally, specific material design rules for high and low κ in organic semiconductors are provided., The authors would like to acknowledge financial support from the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Programme for Centers of Excellence in R&D and project reference PID2021- 128924OB-I00 as well acknowledge Prof. Alejandro R. Goñi (ICMAB-CSIC, ICREA) for his valuable help in setting up the Raman thermometry measurement platform. The authors are thankful to Dr. Aleksandr Perevedentsev (ICMAB-CSIC) for his know-how regarding the fabrication of free-standing films, as well as for the preparation of the drop cast DH6T films. The authors are very thankful to Prof. Paul Smith (ETH Zürich) for fruitful discussions about polymer processing and Prof. Christian Müller for his useful comments on this work, and the suggestions regarding thermal diffusivity. The authors also thank Andrés Gómez for performing the nanoindentation experiments. I.M. and H.C. acknowledge King Abdullah University of Science and Technology Office of Sponsored Research (OSR) under awards no. OSR-2018-CARF/CCF-3079, and OSR-4106 CPF2019 as well as EC FP7 Project SC2 (610115).as the European Research Council (ERC) under grant agreement no. 648901. This work was financially supported by the European Commission through the Marie Skłodowska-Curie projects HORATES (GA-955837). J.M. is also grateful to the Spanish Ministry of Science and Innovation through project PGC2018-094620-A-I00. The authors also acknowledge the support from the Marie Skłodowska-Curie program (action no. 793726 – TELIOTES) and the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources. The authors, Arabia Saudita. King Abdullah University of Science and Technology; OSR-2018-CARF/CCF-3079, Arabia Saudita. King Abdullah University of Science and Technology; OSR-4106 CPF2019
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reduction of the Lattice Thermal Conductivity of Polymer Semiconductors by Molecular Doping

  • Zapata Arteaga, Osnat
  • Perevedentsev, Aleksandr
  • Marina, Sara
  • Martín, Jaime
  • Reparaz, J. S.
  • Campoy Quiles, Mariano
Here we show that molecular doping of polymer thermoelectrics increases the electrical conductivity while reducing the thermal conductivity. A high-throughput methodology based on annealing and doping gradients within individual films is employed to self-consistently analyze and correlate electrical and thermal characteristics for the equivalent of >100 samples. We focus on the benchmark material system poly(2,5- bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT) doped with molecular acceptor 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ). The thermal conductivity of neat PBTTT films is dominated by the degree of crystallinity, with thermal percolation observed for annealing temperatures >170 °C. Upon doping the samples with a relatively low amount of F4TCNQ (anion content <1 mol %), the thermal conductivity exhibits a two-fold reduction without compromising the crystalline quality, which resembles the effect of alloy scattering observed in several inorganic systems. The analysis of the relation between thermal and electrical conductivities shows that thermal transport is dominated by a doping-induced reduced lattice contribution., We acknowledge financial support from the Spanish Ministry of Science and Innovation through projects PGC2018-095411- B-I00 and MAT2017-90024-P (TANGENTS)-EI/FEDER, UE projects; the Generalitat de Catalunya through grants 2017SGR488 and AGAUR 2018 PROD 00191; and from the European Research Council (ERC) under grant agreement no. 648901. O.Z.-A. acknowledges CONACYT-SENER for his Ph.D. scholarship (no. 472571). J.M. thanks MCIU for the Ramon y Cajal contract and grant PGC2018-094620-A-I00. ́ We thank Dr. Agusti ́ n Mihi for the access to and support with the FTIR equipment. We acknowledge the technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). We thank Andreś Gomez Rodri ́ ́ guez from the Scanning Probe Microscopy Laboratory (ICMAB-CSIC) for a set of AFM measurements. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure dependent photostability of ITIC and ITIC-4F†

  • Ciammaruchi, Laura
  • Zapata Arteaga, Osnat
  • Gutiérrez Fernández, Edgar
  • Martín, Jaime
  • Campoy Quiles, Mariano
Strong synthetic and engineering efforts have taken the efficiency of non-fullerene acceptor (NFA) based organic solar cells above 18% in a few years. Nonetheless, a deep understanding of the fundamental properties of this class of molecules is still missing. Here, we systematically investigated the morphological properties of two high efficient indacenodithienothiophene-based NFAs – namely ITIC and ITIC-4F – in order to correlate the hydrogen/fluorination substitutions with the materials structural and stability properties. We confirm that each NFA structurally evolves with increasing temperature into several polymorphs, identifying through spectroscopy their corresponding narrow temperature ranges. We demonstrate that the materials’ response to accelerated stress tests (ASTs) is both substitution and polymorph dependent. ASTs underlined that the most vulnerable molecular segment corresponds to the thienothiophene C[double bond, length as m-dash]C bond along the central backbone, together with the C[double bond, length as m-dash]C linkage between the electron-rich donor and the electron-deficient acceptor moieties, with a degradation process triggered by oxygen and light. ITIC-4F showed lower oxidation capability and a higher bond strength retaining effect compared to ITIC. Lastly, the AST approach employed here allowed for the extrapolation of morphological and stability-related features within a high-throughput framework, and can be considered as a valuable methodological tool for future stability-related studies., The authors would like to thank Dr Tommaso Salzillo and Dr Valentina Bulova for very fruitful scientific discussions. The authors kindly acknowledge the financial support from Ministerio de Economía y Competitividad of Spain through the “Severo Ochoa” Programme for Centres of Excellence in R&D and projects PGC2018-095411-B-I00 and PGC2018-094620-A-I00, as well as the European Research Council (ERC) under grant agreement no. 648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The importance of quantifying the composition of the amorphous intermixed phase in organic solar cells

  • Marina, Sara
  • Kaufmann, Noëmi Petrina
  • Karki, Akchheta
  • Gutiérrez-Meza, Elizabeth
  • Gutiérrez-Fernández, Edgar
  • Vollbrecht, Joachim
  • Solano, Eduardo
  • Walker, Barnaby
  • Bannock, James H.
  • Mello, John de
  • Silva, Carlos
  • Nguyen, Thuc-Quyen
  • Cangialosi, Daniele
  • Stingelin, Natalie
  • Martín, Jaime
The relation of phase morphology and solid‐state microstructure with organic photovoltaic (OPV) device performance has intensely been investigated over the last twenty years. While it has been established that a combination of donor:acceptor intermixing and presence of relatively phase‐pure donor and acceptor domains is needed to get an optimum compromise between charge generation and charge transport/charge extraction, a quantitative picture of how much intermixing is needed is still lacking. This is mainly due to the difficulty in quantitatively analyzing the intermixed phase, which generally is amorphous. Here, fast scanning calorimetry, which allows measurement of device‐relevant thin films (<200 nm thickness), is exploited to deduce the precise composition of the intermixed phase in bulk‐heterojunction structures. The power of fast scanning calorimetry is illustrated by considering two polymer:fullerene model systems. Somewhat surprisingly, it is found that a relatively small fraction (<15 wt%) of an acceptor in the intermixed amorphous phase leads to efficient charge generation. In contrast, charge transport can only be sustained in blends with a significant amount of the acceptor in the intermixed phase (in this case: ≈58 wt%). This example shows that fast scanning calorimetry is an important tool for establishing a complete compositional characterization of organic bulk heterojunctions. Hence, it will be critical in advancing quantitative morphology–function models that allow for the rational design of these devices, and in delivering insights in, for example, solar cell degradation mechanisms via phase separation, especially for more complex high‐performing systems such as nonfullerene acceptor:polymer bulk heterojunctions., J.M. thanks MCIU for the Ramón y Cajal contract and the Ikerbasque Foundation for the Ikerbasque Research Fellow program. J.M is also grateful to MCIU (Ref. PGC2018‐094620‐A‐I00), to Basque Country Government (Ref. PIBA19‐0051). S.M. is grateful to POLYMAT for the doctoral scholarship. J.M and E.G.‐F. acknowledge support through the European Union's Horizon 2020 research and innovation program, H2020‐FETOPEN‐01‐2018‐2020 (FET‐Open Challenging Current Thinking), “LION‐HEARTED”, grant agreement no. 828984. N.S. in addition gratefully acknowledges support from the IdEx Bordeaux Excellence program (ANR‐10‐IDEX‐03‐02). D.C. acknowledges the Basque Country Government (Ref. No. IT‐654‐ 13 (GV)) and MINECO (Grant No. MAT2015‐63704‐P) for their financial support. The work at Georgia Tech was supported by the National Science Foundation (DMR‐1729737). J.V. acknowledges funding by the Alexander‐von‐Humboldt Stiftung. The authors would like to thank the financial support provided by the IONBIKE RISE project. This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska‐Curie grant agreement No 823989. T.Q.N. acknowledges support from the Organic Materials Chemistry Program, Air Force Office of Scientific Research (grant no. FA9550‐19‐1‐0348)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymorphism in non-fullerene acceptors based on indacenodithienothiophene

  • Marina, Sara
  • Scaccabarozzi, Alberto D.
  • Gutiérrez-Fernández, Edgar
  • Solano, Eduardo
  • Khirbat, Aditi
  • Ciammaruchi, Laura
  • Iturrospe, Amaia
  • Balzer, Alex
  • Yu, Liyang
  • Gabirondo, Elena
  • Monnier, Xavier
  • Sardón, Haritz
  • Anthopoulos, Thomas D.
  • Caironi, Mario
  • Campoy Quiles, Mariano
  • Müller, Christian
  • Cangialosi, Daniele
  • Stingelin, Natalie
  • Martín, Jaime
Organic solar cells incorporating non-fullerene acceptors (NFAs) have reached remarkable power conversion efficiencies of over 18%. Unlike fullerene derivatives, NFAs tend to crystallize from solutions, resulting in bulk heterojunctions that include a crystalline acceptor phase. This must be considered in any morphology-function models. Here, it is confirmed that high-performing solution-processed indacenodithienothiophene-based NFAs, i.e., ITIC and its derivatives ITIC-M, ITIC-2F, and ITIC-Th, exhibit at least two crystalline forms. In addition to highly ordered polymorphs that form at high temperatures, NFAs arrange into a low-temperature metastable phase that is readily promoted via solution processing and leads to the highest device efficiencies. Intriguingly, the low-temperature forms seem to feature a continuous network that favors charge transport despite of a poorly order along the π–π stacking direction. As the optical absorption of the structurally more disordered low-temperature phase can surpass that of the more ordered polymorphs while displaying comparable—or even higher—charge transport properties, it is argued that such a packing structure is an important feature for reaching highest device efficiencies, thus, providing guidelines for future materials design and crystal engineering activities., This work is supported by the Ministerio de Ciencia e Innovacion/FEDER (under Ref. PGC2018-094620-A-I00 and PGC2018-095411-B-I00, CEX2019-000917-S and PGC2018- 095411-B-100) and the Basque Country Government (Ref. PIBA19-0051). S.M. is grateful to POLYMAT for the doctoral scholarship. The authors thank A. Arbe, A. Alonso-Mateo, L. Hueso for their support and access to characterization tools. The authors also thank the technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF). GIWAXS experiments were performed at BL11 NCD-SWEET beamline at ALBA Synchrotron (Spain) with the collaboration of ALBA staff. J.M and E.F.-G. acknowledge support through the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN 01- 2018-2020 (FET-Open Challenging Current Thinking), ‘LION-HEARTED', grant agreement n. 828984. J.M and N.S. would like to thank the financial support provided by the IONBIKE RISE project, which has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 823989. N.S. and A.K. and A.B. furthermore are grateful to the U.S. National Science Foundation (NSF) for support via project # 1905901 within NSF’s Division of Materials Research. A. S. and M. C. acknowledge financial support by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program “HEROIC,” grant agreement 638059. This work was partially carried out at Polifab, the micro- and nanotechnology center of the Politecnico di Milano. .C.M. thanks the Knut and Alice Wallenberg Foundation for funding through the project “Mastering Morphology for Solution-borne Electronics”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physical aging behavior of a glassy polyether

  • Monnier, Xavier
  • Marina, Sara
  • Lopez de Pariza, Xabier
  • Sardón, Haritz
  • Martín, Jaime
  • Cangialosi, Daniele
This article belongs to the Special Issue Recent Developments on Calorimetry and Thermal Analysis of Polymers and Nanocomposites., The present work aims to provide insights on recent findings indicating the presence of multiple equilibration mechanisms in physical aging of glasses. To this aim, we have investigated a glass forming polyether, poly(1-4 cyclohexane di-methanol) (PCDM), by following the evolution of the enthalpic state during physical aging by fast scanning calorimetry (FSC). The main results of our study indicate that physical aging persists at temperatures way below the glass transition temperature and, in a narrow temperature range, is characterized by a two steps evolution of the enthalpic state. Altogether, our results indicate that the simple old-standing view of physical aging as triggered by the α relaxation does not hold true when aging is carried out deep in the glassy state., D.C. research was funded by MICINN-Spain and FEDER-UE, grant PGC2018-094548-B-I00; and the Basque Government, grant IT-1175-19. J.M. thanks MICINN /FEDER for grant Ref. PGC2018-094620-A-I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design Rules for Polymer Blends with High Thermoelectric Performance

  • Zapata Arteaga, Osnat
  • Marina, Sara
  • Zuo, Guangzheng
  • Xu, Kai
  • Dörling, Bernhard
  • Pérez, Luis Alberto
  • Reparaz, J. Sebastian
  • Martín, Jaime
  • Kemerink, Martijn
  • Campoy Quiles, Mariano
A combinatorial study of the effect of in-mixing of various guests on the thermoelectric properties of the host workhorse polymer poly[2,5-bis(3-tetradecylthiophen-2-yl)thieno[3,2-b]thiophene] (PBTTT) is presented. Specifically, the composition and thickness for doped films of PBTTT blended with different polymers are varied. Some blends at guest weight fractions around 10–15% exhibit up to a fivefold increase in power factor compared to the reference material, leading to zT values around 0.1. Spectroscopic analysis of the charge-transfer species, structural characterization using grazing-incidence wide-angle X-ray scattering, differential scanning calorimetry, Raman, and atomic force microscopy, and Monte Carlo simulations are employed to determine that the key to improved performance is for the guest to promote long-range electrical connectivity and low disorder, together with similar highest occupied molecular orbital levels for both materials in order to ensure electronic connectivity are combined., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa" Program for Centers of Excellence in R&D (No. CEX2019-000917-S) and projects PGC2018-095411- B-I00, PGC2018-094620-A-I00, and MAT2017-90024-P (TANGENTS)-EI/Fondo Europeo de Desarrollo Regional and from the European Research Council (ERC) under Grant Agreements Nos. 648901 and 963954. J.M. thanks Ministerio de Ciencia, Innovación y Universidades for the Ramón y Cajal contract. The authors are thankful to Dr. Agustín Mihi for access and support with the FTIR equipment. The authors acknowledge the European funding (European Regional Development Fund and European Social Fund). The authors thank Andrés Gómez Rodríguez from the Scanning Probe Microscopy Laboratory (ICMAB-CSIC) for a set of fine AFM measurements. GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. Finally, the authors acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unidad de Recursos de Información Científica para la Investigación (URICI). M.K. thanks the Carl Zeiss Foundation for financial support. G.Z. acknowledges the support from Alexander von Humboldt Foundation., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unraveling the Influence of the Preexisting Molecular Order on the Crystallization of Semiconducting Semicrystalline Poly(9,9-di-n-octylfluorenyl-2,7-diyl (PFO)

  • Pirela, Valentina
  • Campoy Quiles, Mariano
  • Müller, Alejandro J.
  • Martín Pérez, Jaime
Understanding the complex crystallization process of semiconducting polymers is key for the advance of organic electronic technologies as the optoelectronic properties of these materials are intimately connected to their solid-state microstructure. These polymers often have semirigid backbones and flexible side chains, which results in a strong tendency to organize/order in the liquid state. Therefore, crystallization of these materials frequently occurs from liquid states that exhibit-at least partial-molecular order. However, the impact of the preexisting molecular order on the crystallization process of semiconducting polymers- indeed, of any polymer-remained hitherto unknown. This study uses fast scanning calorimetry (FSC) to probe the crystallization kinetics of poly(9,9-di-n-octylfluorenyl-2,7-diyl (PFO) from both an isotropic disordered melt state (ISO state) and a liquid-crystalline ordered state (NEM state). Our results demonstrate that the preexisting molecular order has a profound impact on the crystallization of PFO. More specifically, it favors the formation of effective crystal nucleation centers, speeding up the crystallization kinetics at the early stages of phase transformation. However, samples crystallized from the NEM state require longer times to reach full crystallization (during the secondary crystallization stage) compared to those crystallized from the ISO state, likely suggesting that the preexisting molecular order slows down the advance in the latest stages of the crystallization, that is, those governed by molecular diffusion. The fitting of the data with the Avrami model reveals different crystallization mechanisms, which ultimately result in a distinct semicrystalline morphology and photoluminescence properties. Therefore, this work highlights the importance of understanding the interrelationships between processing, structure, and properties of polymer semiconductors and opens the door for performing fundamental investigations via newly developed FSC methodologies of such materials that otherwise are not possible with conventional techniques., We acknowledge the support of the Basque Government through grant IT1503-22.J.M. We thank MICINN /FEDER for the Ramón y Cajal contract and the grant ref. PGC2018-094620 A-I00. The Xunta de Galicia is also acknowledged for the grant Proyectos de Consolidación ref. ED431F 2021/009, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymerization within Nanoporous Anodized Alumina Oxide Templates (AAO): A Critical Survey

  • Mijangos, Carmen
  • Martín, Jaime
In the last few years, the polymerization of monomers within the nanocavities of porous materials has been thoroughly studied and developed, allowing for the synthesis of polymers with tailored morphologies, chemical architectures and functionalities. This is thus a subject of paramount scientific and technological relevance, which, however, has not previously been analyzed from a general perspective. The present overview reports the state of the art on polymerization reactions in spatial confinement within porous materials, focusing on the use of anodized aluminum oxide (AAO) templates. It includes the description of the AAO templates used as nanoreactors. The polymerization reactions are categorized based on the polymerization mechanism. Amongst others, this includes electrochemical polymerization, free radical polymerization, step polymerization and atom transfer radical polymerization (ATRP). For each polymerization mechanism, a further subdivision is made based on the nature of the monomer used. Other aspects of “in situ” polymerization reactions in restricted AAO geometries include: conversion monitoring, kinetic studies, modeling and polymer characterization. In addition to the description of the polymerization process itself, the use of polymer materials derived from polymerization in AAO templates in nanotechnology applications, is also highlighted. Finally, the review is concluded with a general discussion outlining the challenges that remain in the field., The authors acknowledge the Spanish Ministry of Science, Innovation and Universities (MINECO) for financial support in the form of grants MAT2020-83014-C2-2-P and PGC2018-094620-A-I00; J.M. thanks MCIU for the Ramón y Cajal and Ikerbasque Foundation for the Ikerbasque Research Fellow program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On The Thermal Conductivity of Conjugated Polymers for Thermoelectrics

  • Rodríguez Martínez, Xabier
  • Saiz, Fernan
  • Dörling, Bernhard
  • Marina, Sara
  • Guo, Jiali
  • Xu, Kai
  • Chen, Hu
  • Martin, Jaime
  • McCulloch, Iain
  • Rurali, Riccardo
  • Reparaz, J. Sebastian
  • Campoy Quiles, Mariano
The thermal conductivity (κ) governs how heat propagates in a material, and thus is a key parameter that constrains the lifetime of optoelectronic devices and the performance of thermoelectrics (TEs). In organic electronics, understanding what determines κ has been elusive and experimentally challenging. Here, by measuring κ in 17 π-conjugated materials over different spatial directions, it is statistically shown how microstructure unlocks two markedly different thermal transport regimes. κ in long-range ordered polymers follows standard thermal transport theories: improved ordering implies higher κ and increased anisotropy. κ increases with stiffer backbones, higher molecular weights and heavier repeat units. Therein, charge and thermal transport go hand-in-hand and can be decoupled solely via the film texture, as supported by molecular dynamics simulations. In largely amorphous polymers, however, κ correlates negatively with the persistence length and the mass of the repeat unit, and thus an anomalous, albeit useful, behavior is found. Importantly, it is shown that for quasi-amorphous co-polymers (e.g., IDT-BT) κ decreases with increasing charge mobility, yielding a 10-fold enhancement of the TE figure-of-merit ZT compared to semi-crystalline counterparts (under comparable electrical conductivities). Finally, specific material design rules for high and low κ in organic semiconductors are provided., The authors would like to acknowledge financial support from the Spanish Ministry of Science and Innovation through the “Severo Ochoa” Programme for Centers of Excellence in R&D and project reference PID2021-128924OB-I00 as well as the European Research Council (ERC) under grant agreement no. 648901. This work was financially supported by the European Commission through the Marie Skłodowska-Curie projects HORATES (GA-955837). J.M. is also grateful to the Spanish Ministry of Science and Innovation through project PGC2018-094620-A-I00. The authors also acknowledge the support from the Marie Skłodowska-Curie program (action no. 793726 – TELIOTES) and the Centro de Supercomputación de Galicia (CESGA) for the use of their computational resources. The authors acknowledge Prof. Alejandro R. Goñi (ICMAB-CSIC, ICREA) for his valuable help in setting up the Raman thermometry measurement platform. The authors are thankful to Dr. Aleksandr Perevedentsev (ICMAB-CSIC) for his know-how regarding the fabrication of free-standing films, as well as for the preparation of the drop cast DH6T films. The authors are very thankful to Prof. Paul Smith (ETH Zürich) for fruitful discussions about polymer processing and Prof. Christian Müller for his useful comments on this work, and the suggestions regarding thermal diffusivity. The authors also thank Andrés Gómez for performing the nanoindentation experiments. I.M. and H.C. acknowledge King Abdullah University of Science and Technology Office of Sponsored Research (OSR) under awards no. OSR-2018-CARF/CCF-3079, and OSR-4106 CPF2019 as well as EC FP7 Project SC2 (610115)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of chemical structure on the crystallization kinetics of triple polymorphic high-sulfur-content polythioethers

  • Pirela, Valentina
  • Unanue, Leire
  • Elgoyhen, Justine
  • Ramos, Javier
  • Vega, Juan Francisco
  • Mugica, Agurtzane
  • Zubitur, Manuela
  • Quoc Le, Cuong Minh
  • Chemtob, Abraham
  • Tomovska, Radmila
  • Reiter, Günter
  • Martín, Jaime
  • Müller, Alejandro J.
15 pages, 10 pages, 1 table, This work studies how the chemical structure of relatively similar high-sulfur alternating polythioether homopolymers (DMDS-alt -DVE, DMDS-alt -TEGDVE, and DMDS-alt -BDDVE) affects their structural properties, morphology, polymorphism, and crystallization kinetics. Differential scanning calorimetry (DSC) and polarized light optical microscopy (PLOM) experiments revealed a complex crystallization for the samples in which up to three different polymorphic phases were identified: a very low melting crystal form (VL-Tm form), a low melting crystal form (L-Tm form) and a high melting crystal form (H-Tm form), characterized by their corresponding melting temperature ranges and confirmed via Wide-Angle X-ray Scattering (WAXS). A coexistence of negative and positive spherulites was found, and their origin was revealed by atomic force microscopy (AFM), which showed how the lamellar arrangement varied in the samples from predominantly radial to a cross-hatched morphology. Additionally, the overall isothermal crystallization kinetics were investigated using a combination of PLOM, DSC, and Fast Scanning Calorimetry (FSC) experiments in which DMDS-alt -BDDVE exhibited the fastest overall crystallization kinetics among the three homopolymers, followed by DMDS-alt -DVE and then DMDS-alt -TEGDVE. These results were explained by molecular dynamics simulations in which the diffusion capabilities of each homopolymer along their density, characteristic ratio, and chain diffusion effects were simulated to understand the polymer backbone flexibility and chain mobility, revealing differences among them. DMDS-alt -BDDVE demonstrated the fastest diffusion in the melt, potentially explaining its exceptionally rapid crystallization kinetics., We acknowledge the support of the Basque Government through grant IT1503-22. J.M. thanks MICINN/FEDER for the Ramón y Cajal contract and the grant Ref. PGC2018- 094620-A-I00). The Xunta de Galicia is also acknowledged for the grant Proyectos de Consolidación Ref. ED431F 2021/009. The authors would like to thank the project PID2019-107710 GB-I00 for its financial support., Peer reviewed