Pasar al contenido principal

ECO DISEÑO DE ENVASES BASADOS EN POLIMEROS CONVENCIONALES MEDIANTE MODELIZACION MULTIESCALA VALIDADA

PID2019-107710GB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A computer simulation of the effect of temperature on melt chain dimensions of random short chain branched polyethylene

  • Ramos, Javier
  • Vega, Juan Francisco
  • Martínez-Salazar, Javier
5 pags., 3 figs., 1 tab., It is well established that the chain dimensions of a polymer are intimately related to the viscoelastic fingerprint and the relevant macroscopic properties of the material such as the entanglement modulus and its melt viscosity. In this work, the chain properties have been obtained by means of molecular dynamics simulations computed at different temperatures in a series of ethylene/1-butene copolymers with constant number of carbons in the backbone but varying branch content, from linear polyethylene to poly(1-butene) with a range of molecular weight extending from 7012 g/mol till 14025 g/mol. The simulations were performed in a time window up to 5 μs at four different temperatures between 450 and 600 K. Simulation results are in good agreement with previous SANS experiments performed in this kind of model polymers. The influence of the amount of ethyl branches on the temperature dependence of the backbone conformation was analyzed. Thus, the observed trends of chain dimensions with increasing SCB content and temperature can be explained by the variation in content of the different trans-trans, gauche-trans and gauche-gauche dyads along the polymer backbone., Ministerio de Ciencia, Innovación y Universidades (MICIU), grant number PID2019-107710GB-I00
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Role of Key Amino Acids in the Antimicrobial Mechanism of a Bacteriocin Model Revealed by Molecular Simulations

  • Cruz, Víctor L.
  • Ramos, Javier
  • Martínez-Salazar, Javier
  • Montalbán-López, Manuel
  • Maqueda, Mercedes
13 pags., 8 figs., 3 tabs., The AS-48 bacteriocin is a potent antimicrobial polypeptide with enhanced stability due to its circular sequence of peptidic bonds. The mechanism of biological action is still not well understood in spite of both the elucidation of the molecular structure some years ago and several experiments performed that yielded valuable information about the AS-48 bacterial membrane poration activity. In this work, we present a computational study at an atomistic scale to analyze the membrane disruption mechanism. The process is based on the two-stage model: (1) peptide binding to the bilayer surface and (2) membrane poration due to the surface tension exerted by the peptide. Indeed, the induced membrane tension mechanism is able to explain stable formation of pores leading to membrane disruption. The atomistic detail obtained from the simulations allows one to envisage the contribution of the different amino acids during the poration process. Clustering of cationic residues and hydrophobic interactions between peptide and lipids seem to be essential ingredients in the process. GLU amino acids have shown to enhance the membrane disrupting ability of the bacteriocin. TRP24-TRP24 interactions make also an important contribution in the initial stages of the poration mechanism. The detailed atomistic information obtained from the simulations can serve to better understand bacteriocin structural characteristics to design more potent antimicrobial therapies., The authors thank the MICIU (Ministerio de Ciencia, Innovación y Universidades), grant number PID2019- 107710GB-I00, for the financial support of this investigation. Thanks are given to SGAI-CSIC for the availability of computational resources. J.R. acknowledges financial support by the CSIC (PIE201860E136 and PIE202050E017).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revisiting Polymer-Particle Interaction in PEO Solutions

  • Espasa Valdepeñas, A.
  • Vega, Juan Francisco
  • Cruz, Víctor L.
  • Ramos, Javier
  • Müller, A.J.
  • Martínez-Salazar, Javier
9 pags., 7 figs., 3 tabs., We have measured the electrophoretic mobility and diffusion coefficient of carboxylate-modified and sulfate-modified polystyrene latex particles in poly(ethylene oxide) aqueous solutions. Carboxylate-modified polystyrene particles have shown a bound polymeric layer as the surface net charge vanishes even at very low poly(ethylene oxide) concentration. The polymeric layer causes a lower electrophoretic mobility and slower Brownian diffusion than that corresponding to the bare particles. We show that the diffusion is the result of a significantly increased effective particle size 2rheff = 30 nm. This bound layer is not present in sulfate-modified polystyrene latex particles. The interaction between the carboxylate-modified particle surface and the macromolecules has been confirmed by means of atomistic computer simulations. The grafted acrylate copolymers, which come from the preparation procedure of the latex particles, confer more hydrophobic surface ready to interact with the polymer. The simulations suggest that the interaction is modulated not only by the nature of the acrylic acid monomer but also by the length of the grafted copolymer. Our results have important implications for particle selection in microrheology experiments., We thank to the MICINN (project PID2019-107710GB-I00) for the financial support of this investigation. A.E.-V. acknowledges a contract (CM_MAD_IEM_013) from CSIC under the “Promoción de Empleo Joven e Implantación de la Garantía Juvenil” 2014-2020 program.J.R. acknowledges financial support by the CSIC (PIE201860E136 and PIE202050E017).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rheology of Poly(glycidyl methacrylate) Macromolecular Nano Assemblies

  • Cardil, Andrés
  • Palenzuela, Miguel
  • Vega, Juan Francisco
  • Mosquera, Marta E. G.
A recently reported combined polymerization process of glycidyl methacrylate, mediated by homometallic and heterobimetallic aluminium complexes, naturally produces nano-sized macromolecular assemblies. In this work, the morphological features and the rheological properties of these novel nanoassemblies are studied. The hydrodynamic sizes of the nanoparticles in the solution range from 10 to 40 nm (in numbers), but on a flat surface they adopt a characteristic thin disk shape. The dynamic moduli have been determined in a broad range of temperatures, and the time—temperature superposition applied to obtain master curves of the whole viscoelastic response from the glassy to the terminal regions. The fragility values obtained from the temperature dependence are of m ~40, typical of van de Waals liquids, suggesting a very effective packing of the macromolecular assemblies. The rheological master curves feature a characteristic viscoelastic relaxation with the absence of elastic intermediate plateau, indicating that the systems behaved as un-entangled polymers. The analysis of the linear viscoelastic fingerprint reveals a Zimm-like dynamics at intermediate frequencies typical of unentangled systems. This behaviour resembles that observed in highly functionalized stars, dendrimers, soft colloids and microgels., Financial support from Spanish Government (RTI2018-094840-B-C31 and AEI PID2019-107710GB-I00), the Alcalá University, Spain (CCG19/CC-037) and Madrid Regional Government (EPU-INV/2020/001) are gratefully acknowledged. M.P. thanks the Universidad de Alcalá for a Pre-doctoral Fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Melting Temperature Depression of Polymer Single Crystals: Application to the Eco-Design of Tie-Layers in Polyolefinic-Based Multilayered Films

  • Vega, Juan Francisco
  • Souza-Egipsy, Virginia
  • Expósito, María T.
  • Ramos, Javier
14 pags., 8 figs., 3 tabs. -- This article belongs to the Section Polymer Applications, In this paper, we describe a method for determining polymer compatibility, which will aid in establishing the requirements of polyolefinic materials for the eco-design of multilayer films for mechanical recycling while avoiding the use of reactive tie layers. Our ultimate goal is to define the molecular characteristics of the polyolefinic structural layer that improve compatibility with the tie layer during mechanical recycling. We have investigated the melting temperature depression of single crystals of various polyethylenes embedded in commercial polymeric matrices with various functionalities (ester, acrylate, acetate and methacrylic acid sodium ionomer), which can be potentially used as tie layers. We demonstrate how the concentration and molecular architecture of the matrices affect the melting temperature of the embedded single crystals differently depending on the latter’s molecular architecture. The main finding indicates that the tie layers are more compatible with linear polyethylene than with branched polyethylenes. Indeed, our results show that the heterogeneous Ziegler–Natta linear low-density polyethylene is incompatible with all of the tie layers tested. The depression of melting temperatures observed are in excellent agreement with the results obtained by investigating the rheological behaviour and morphological features of solution-mixed blends in which segmental interactions between polymeric chains have been, in theory, maximized. Because Ziegler– Natta linear density polyethylene is one of the most commonly used polymers as a structural layer in multi-layer applications, the findings of this study are useful as they clearly show the unsuitability of this type of polyethylene for recycling from an eco-design standpoint. The specific molecular requirements for polyethylene layers (branching content less than 0.5/100 carbon atoms) can be specified for use in packaging, guiding the eco-design and valorisation of recycled multi-layered films containing this material., The authors would like to thank the financial support of the Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spain) through the Project PID2019-107710GB-I00
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the melting behaviour of linear polyethylene single crystals in mixtures with homogeneous short chain branched polyolefins

  • Vega, Juan Francisco
  • Ramos, Javier
  • Souza-Egipsy, Virginia
  • Martínez-Salazar, Javier
7 pags., 8 figs., 2 tabs., The melting temperature depression of linear polyethylene lozenge single crystals is thoroughly examined in mixtures with a series of homogeneous high molecular weight branched polyethylene models, with special emphasis on the effect of short chain branching on the compatibility. The results indicate that the melting temperature of the lamellar single crystals is influenced both by the branching content of the surrounding matrix and by the relative volume concentration of the two polymers in the mixture. The discussion of the results is conducted around the compatibility of polymeric species as a function of the short chain branching content, invoking experimental and computational work performed by other authors. The observed depression indicates that the homogeneous mixing of the two polymers at the melting point may occur whenever the branching content is lower than 6–7 every 100 carbon atoms, a result that is reconciled with computer simulations and other experimental approaches., The TEM-BIOPHYM Service at the IEM-CSIC is acknowledged for granting the use of the facilities. The authors would like to thank the financial sup- port from the Ministerio de Ciencia e Innovacion and Agencia Estatal de Investigacion (Spain) through the project PID2019-107710 GB-I00.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The role of molecular architecture on the viscoelastic properties of thermoreversible polyurethane adhesives

  • Vega, J.F.
  • Salavagione, Horacio J.
  • Quiles-Díaz, Susana
  • Seyler, Helga
  • Gómez-Fatou, Marián A.
  • Flores, Araceli
New polyurethane (PUR) adhesives containing covalent Diels-Alder (DA) bonds that can break and form with temperature have been recently developed for sustainable multilayer packaging. The understanding of the mechanical properties and in particular of creep in terms of molecular architecture appears of outmost importance in view of their applications and potential reutilization. Oscillatory shear rheometry shows a modulus decrease with temperature associated to bond breakage and the enhancement found upon cooling can be associated with network reconstruction. Analysis of storage modulus values above the glass transition and below the retro-DA reaction suggests a lower network crosslinking density with increasing adduct content. Room temperature indentation and shear rheometry tests reveal that DA bonds improve the modulus and reduce the resistance to linear viscoelastic flow. The modulus improvement can be associated to the enhanced chain rigidity introduced by the DA moieties and the reduced creep resistance seems to be related to the decrease of crosslinking density., This project has received funding from the Bio Based Industries Joint Undertaking (BBI-JU) under the European Union’s Horizon 2020 research and innovation program under grant agreement N◦ 837715. The authors wish to thank the MICINN (Ministerio de Ciencia e Innovacion), ´ Spain, for funding under grant PID2019-107710 GB-I00. The TEM-BIOPHYM Service at the IEM-CSIC is acknowledged for granting the use of the rheology facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insight into the melt-processed polylimonene oxide/polylactic acid blends

  • Palenzuela, Miguel
  • Vega, Juan Francisco
  • Souza-Egipsy, Virginia
  • Ramos, Javier
  • Rentero, Christian
  • Sessini, Valentina
  • Mosquera, Marta E.G.
8 pags., 7 figs. 2 tabs., In this work, the polymerization of limonene oxide (LO) has been optimized at room temperature with two different aluminium-based catalysts [AlMeX{2,6-(CHPh2)2-4-tBu-C6H2O}] (X = Me (1), Cl (2)). A fully bio-based ether, polylimonene oxide (PLO), has been synthesized with low molecular weight and good thermal stability, being a potential sustainable polymeric additive for other bio-based and biodegradable polymers such as polylactic acid (PLA). Hence, we have explored its ability to influence the thermal, mechanical and morphological properties of PLA by preparing their blends by melt processing. The addition of a low amount of PLO led to a nearly 10 °C decrease in the PLA glass transition temperature. Moreover, a decrease in the PLA melting temperature and the degree of crystallinity was observed. Interestingly, a remarkable increase in the flexibility of PLA-based films was noticed. All the results point to the existence of strong interactions between the components, suggesting their partial miscibility., The authors would like to thank the Comunidad de Madrid (EPU-INV/2020/001) and the Ministerio de Ciencia e Innovación (Spain) through the projects TED2021-130871B-C22, PID2021-122708OB-C31, PID2019-107710 GB-I00, and RYC2021-033921-I for their financial support. BIOPHYM Service at the IEM-CSIC and POLYMAT (Rheology Lab) are acknowledged for granting the use of their facilities. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754382, GOT ENERGY TALENT., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Titanium-catalyzed synthesis of polymyrcene and polyanethol and application as sustainable additives for poly(lactic acid)

  • Vinueza-Vaca, J.
  • Franco-Mateo, Emma
  • Sessini, V.
  • Mosquera, Marta E.G.
  • Souza-Egipsy, Virginia
  • Ramos, Javier
  • Vega, Juan Francisco
  • Jiménez, Gerardo
  • Tabernero, Vanessa
12 pags., 11 figs., 4 tabs., The replacement of fossil-derived plastics with those obtained from bio-based resources, which present suitable performance to be employed as commodity plastics is currently an important field of research, given the urgent need to transition from a fossil-based to a more sustainable economy. In this context, this work is focused on the application of a catalytic system based on silsesquioxane-cyclopentadienyl titanium complexes for the preparation of bio-based polymers, which can be used as additives to improve the poor material properties of a biodegradable polymer such as poly(lactic acid) (PLA). These titanium complexes, when activated with methylaluminoxane or with triflate salts, are shown to be capable of the polymerization of two bio-based monomers: myrcene and anethole. It is notable that polymerizations with these two distinct monomers take place through different mechanisms. The resulting polymyrcene (PMy) and polyanethol (PAN) have been applied as modifiers for PLA. Binary blends of PMy and PLA exhibited a considerable decrease in T and the promotion of PLA crystallization for a PMy content below 15 wt%. The mechanical properties of the PLA/PMy blends also displayed plasticization, with a decrease in the elastic modulus and enhanced plasticity, which resulted in less fragile systems compared to pure PLA. Morphological analysis has indicated a partially miscible, phase-separated system with micron-sized domains. In contrast, PAN completely inhibited PLA crystallization and the PLA/PAN blends were immiscible, but well-dispersed, a phase-separated system was obtained in solvent-casting film preparation with very small PAN domains. The blends showed higher tensile modulus than pure PLA and an absence of plastic behaviour, resulting in more fragile systems upon the addition of PAN to PLA., The authors would like to thank the financial support from the Ministerio de Ciencia e Innovacion and Agencia Estatal de Investigacion (Spain) through the project PID2021-122708OB-C31, PID2019-107710GB-I00, TED2021-130871B–C22, and RYC2021-033921-I, Project UAHAE-2017-2. J.M.V. thanks the Universidad de Alcala for FPI-572765 Predoctoral Fellowship and the PIUAH21/CC-028 project. The TEMBIOPHYM Service at the IEM-CSIC is acknowledged for granting the use of the facilities
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing the recyclability of ELV plastic bumpers: Characterization of molecular, morphological, rheological, mechanical properties and ageing degradation

  • Castilla Brazales, Juan
  • Expósito, M. Teresa
  • Paredes, Beatriz
  • Lechuga, Daniel
  • Martínez, Cristina
  • Cardil, Andrés
  • Aguilera-Villegas, Lola
  • Ramos, Javier
  • Domínguez, Carlos
  • Vega, Juan Francisco
  • van Grieken, Rafael
  • García-Muñoz, Rafael A.
13 pags., 8 figs., 1 tab., While the automotive industry has traditionally prioritized metal recycling, the increasing use of plastics in vehicles underlines the need for sustainable management of these materials. Recycling rates of plastics from end-of-life vehicles (ELVs) in Europe are low, but recent EU legislation requires 25 % of the plastics in new vehicles to be recycled, forcing innovative designs and strategies to enhance the recovery and quality of recycled resins. This study focuses on post-consumer bumpers, a significant recoverable component of ELVs, by assessing their molecular, morphological, rheological, and mechanical properties to investigate their homogeneity and quality from various sources to assess their suitability for recycling. Since the aging of these materials, caused by thermo-oxidative and thermo-mechanical degradation processes, can compromise the quality of recycled bumpers, we propose a blend of recycled PP from different bumper cars with virgin resin, representing a realistic scenario where the post-consumer ELV bumpers are collected. Interestingly, this blend, which can replace up to 50 % of the virgin resin without additional compatibilizers or additives, mitigates the degradation effects. Furthermore, the study evaluates the degradation resistance of these blends through multiple extrusion cycles and accelerated weathering tests in a temperature-controlled UV chamber to ascertain the number of cycles the material can tolerate without significant quality degradation, and to determine its suitability for long-term applications. Our results not only support the feasibility of using recycled PP for automotive components but also contribute to meeting the EU's recycling targets. This research highlights the potential for significant advances in the circularity of automotive plastics, providing a sustainable pathway for integrating recycled materials into new vehicle production., Grant TED2021-130820B-C21 funded by MCIN/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”. Grant PID2019-107710-GB-I00 funded by MCIN/AEI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of chemical structure on the crystallization kinetics of triple polymorphic high-sulfur-content polythioethers

  • Pirela, Valentina
  • Unanue, Leire
  • Elgoyhen, Justine
  • Ramos, Javier
  • Vega, Juan Francisco
  • Mugica, Agurtzane
  • Zubitur, Manuela
  • Quoc Le, Cuong Minh
  • Chemtob, Abraham
  • Tomovska, Radmila
  • Reiter, Günter
  • Martín, Jaime
  • Müller, Alejandro J.
15 pages, 10 pages, 1 table, This work studies how the chemical structure of relatively similar high-sulfur alternating polythioether homopolymers (DMDS-alt -DVE, DMDS-alt -TEGDVE, and DMDS-alt -BDDVE) affects their structural properties, morphology, polymorphism, and crystallization kinetics. Differential scanning calorimetry (DSC) and polarized light optical microscopy (PLOM) experiments revealed a complex crystallization for the samples in which up to three different polymorphic phases were identified: a very low melting crystal form (VL-Tm form), a low melting crystal form (L-Tm form) and a high melting crystal form (H-Tm form), characterized by their corresponding melting temperature ranges and confirmed via Wide-Angle X-ray Scattering (WAXS). A coexistence of negative and positive spherulites was found, and their origin was revealed by atomic force microscopy (AFM), which showed how the lamellar arrangement varied in the samples from predominantly radial to a cross-hatched morphology. Additionally, the overall isothermal crystallization kinetics were investigated using a combination of PLOM, DSC, and Fast Scanning Calorimetry (FSC) experiments in which DMDS-alt -BDDVE exhibited the fastest overall crystallization kinetics among the three homopolymers, followed by DMDS-alt -DVE and then DMDS-alt -TEGDVE. These results were explained by molecular dynamics simulations in which the diffusion capabilities of each homopolymer along their density, characteristic ratio, and chain diffusion effects were simulated to understand the polymer backbone flexibility and chain mobility, revealing differences among them. DMDS-alt -BDDVE demonstrated the fastest diffusion in the melt, potentially explaining its exceptionally rapid crystallization kinetics., We acknowledge the support of the Basque Government through grant IT1503-22. J.M. thanks MICINN/FEDER for the Ramón y Cajal contract and the grant Ref. PGC2018- 094620-A-I00). The Xunta de Galicia is also acknowledged for the grant Proyectos de Consolidación Ref. ED431F 2021/009. The authors would like to thank the project PID2019-107710 GB-I00 for its financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assessing the mechanical behaviour of reusable polyurethane networks with graphene as internal nano-heater

  • Vega, Juan Francisco
  • Salavagione, Horacio J.
  • Nadin-Ambrosio, Fabio
  • Seyler, H.
  • Cardil, A.
  • Gómez-Fatou, Marián A.
  • Flores, Araceli
This article is part of a special issue entitled: POLY-CHAR 2024 published in Polymer, Polyurethane adhesives with thermoreversible Diels Alder (DA) bonds offer a sustainable approach to improve recyclability of multilayer packaging. This study evaluates the effect of graphene, used as an internal heater to trigger bond breakage, on the mechanical properties by indentation and shear rheology. Particular attention is paid to their reversibility and cyclability upon thermal heating or IR irradiation. Graphene initially reduces the modulus by disrupting network formation resulting in reduced DA bond incorporation and crosslink density. The intrinsic properties of graphene counterbalance this effect at higher loadings. Rheology shows that graphene accelerates the retro-DA reaction during conventional thermal heating. Indentation tests indicate that IR expo- sure temporarily reduces the mechanical properties, with full recovery after 100 min. Both rheological and indentation methods show improved mechanical properties (modulus and hardness) after the initial retro-DA reaction, which stabilise after further thermal treatments and are related to the formation of a new network structure., This project has received funding from the Bio Based Industries Joint Undertaking (BBI-JU) under the European Union’s Horizon 2020 research and innovation program under grant agreement Nº 837715. The authors wish to thank the MICIU/AEI/10.13039/501100011033, Spain, for funding under grants PID2019-107710 GB-I00, PID2020- 117573 GB-I00. Project PIE202250E035 (CSIC) is also acknowledged. The TEM-BIOPHYM Service at the IEM-CSIC is acknowledged for granting the use of the rheology facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic heterogeneity and cooperativity in polyurethane-based vitrimers

  • Pieruccini, M.
  • Fernández, M.
  • Vozzolo, G.
  • Ximenis, M.
  • Aguirresarobe, R.
  • Vega, Juan Francisco
8 pages, 3 figures, 5 tables .-- This article is part of a special issue entitled: POLY-CHAR 2024 published in Polymer, The complex, non-Maxwellian behaviour observed in the mechanical relaxation of polyurethane-based vitrimers, is analysed in the light of dynamical heterogeneity and cooperativity concepts recently formalized within a statistical mechanical framework. Cooperative effects are highlighted at temperatures significantly higher than calorimetric T (≈−53 °C) as an effect of transient dynamic links; the Maxwellian behaviour is recovered when the temperature is raised up to 120 °C. The analysis provides the number of monomers involved both in the collective precursory oscillatory modes, and in the subsequent structural rearrangements. The mean activation energies, which can be derived at each single temperature, are in the same order of those customarily estimated from Arrhenius plots assuming a Maxwellian behaviour. Making the dynamic network inactive at low temperatures results in larger values of both cooperativity and mean activation energy. Overall, a more complete description of the relaxation behaviour is achieved, particularly in the regime where complex segmental dynamics starts to interfere with the ideal Maxwellian behaviour expected at high temperatures., The theoretical framework began to be developed at IEM (CSIC) in Madrid during a sabbatical stay of MP (MCYT Grant SAB-2006-0077) under the auspices of CNR, Italy. MF and RA gratefully acknowledge funding from PROPOL IT1503-22, University of the Basque Country (UPV/EHU). JFV gratefully acknowledges funding from the Spanish Ministry of Science and Innovation (MCINN), under Grant PID2019- 107710 GB-I00, and the Spanish National Research Council (CSIC), under Grant PIE202250E035. MP is grateful to Dr. A. Gradone of CNR- ISNM for useful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Side-Chain gem-dialkyl Substitution on the Crystallization of poly(δ-valerolactone): Competition between Steric Effects and Chain Flexibility

  • Sangroniz, Leire
  • Ramos, Javier
  • Vega, Juan Francisco
  • Li, Xin Lei
  • Xu, Tie Qi
  • Chen, Eugene Y.X.
  • Müller, Alejandro J.
  • Cavallo, Dario
13 pages, 12 figures, 2 tables, The performance of renewable and biodegradable polyesters can be modified by introducing side-chain alkyl substituents into their repeating units. This work examines the impact of gem-alkyl disubstitution (two alkyl substituents on the same carbon) in poly(δ-valerolactone) (PVL) on its thermal properties and crystallization kinetics for the first time. The introduction of alkyl side-chain substituents first increases glass (T<inf>g</inf>) and melting (T<inf>m</inf>) transition temperatures until a specific number of carbon atoms in the side chain is introduced, after which these first-order transitions decrease. Isothermal crystallization experiments indicate that the spherulitic growth rate is governed by secondary nucleation or chain diffusion, depending on the alkyl chain length. Melt memory has also been assessed, revealing a maximum in the temperature region for self-nuclei persistence at intermediate alkyl chain lengths, as shown for T<inf>g</inf>and T<inf>m</inf>, reflecting the role of chain mobility. Molecular dynamics simulations demonstrate that the side-chain length in PVL derivatives regulates the glass transition and diffusion through a balance of chain stiffness and free volume. A nonmonotonic trend is observed in both T<inf>g</inf>and mobility, underscoring the complex interplay of structural and dynamic factors, consistent with the experimental observations., A.J.M. acknowledges the funding from the Basque Government (Grant No. IT1503-22). L.S. acknowledges Margarita Salas fellowship granted by the University of the Basque Country (UPV/EHU) and funded by the European Union-Next Generation EU and the Spanish Government. L.S. also acknowledges the Gipuzkoa Fellow grant from the regional government Diputación de Gipuzkoa. J.R. and J.F.V. gratefully acknowledge SGAI-CSIC’s assistance and help using the DRAGOSupercomputer. Additionally, J.R. and J.F.V. acknowledge the use of FINISTERRAE-CESGA computational resources. J.R. and J.F.V. would like to thank the financial support from the Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spain), through Project No. PID2019-107710 GB-I00. T.-Q.X. acknowledges the funding from the National Natural Science Foundation of China (No. 22371030), and E.Y.-X.C. acknowledges support by RePLACE (Redesigning Polymers to Leverage A Circular Economy), funded by the Office of Science of the U.S. Department of Energy, via Award No. DE-SC0022290., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular interactions between ethylene-vinyl alcohol copolymers and functionalized tie layers for recyclable multilayer films

  • Expósito, M. T.
  • Souza-Egipsy, Virginia
  • Paredes, B.
  • Ramos, Javier
  • Vega, Juan Francisco
10 pages, 8 figures, 1 table, 1 scheme, The increasing demand for recyclable multilayer polymer packaging requires a deeper understanding of the interactions between barrier and tie-layer materials to enable circular design strategies. In this study, the compatibility between polyethylene–co–vinyl alcohol (EVOH) copolymer and typical tie-layer copolymers—polyethylene–co–ethyl acrylate, polyethylene–co–vinyl acetate, and a polyethylene–co–methacrylic acid ionomer partially neutralized with sodium—was investigated. EVOH crystalline nanoaggregates were prepared and embedded in the different matrices to evaluate physical and thermal interactions. Differential Scanning Calorimetry revealed a pronounced melting temperature depression of EVOH crystals when blended with functionalized matrices, particularly with the ionomer, indicating strong intermolecular interactions. In contrast, non-interacting systems retained their original melting behaviour, confirming the absence of chemical affinity. Fourier Transform Infrared Spectroscopy further corroborated these findings, showing hydrogen-bonding interactions between the hydroxyl groups of EVOH and the carbonyl or carboxylate groups of the functionalized tie layers. The combination of the results obtained from the different techniques provides a comprehensive understanding of the molecular mechanisms governing compatibility, offering valuable insights for the eco-design and recyclability enhancement of polyolefin-based multilayer packaging materials., The authors would like to thank the financial support of the Ministerio de Ciencia e Innovación and Agencia Estatal de Investigación (Spain) through the Project PID2019-107710GB-I00. The Macromolecular Physics Service at the IEM-CSIC is acknowledged for granting the use of the facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Closed-loop recycling of ELV fuel-tank HDPE: Multimodal characterization and processability at high recycled content

  • Expósito, M. Teresa
  • Paredes, Beatriz
  • Castilla Brazales, Juan
  • Souza-Egipsy, Virginia
  • Vega , Juan Francisco
  • Domínguez, Carlos
  • van Grieken, Rafael
  • García-Muñoz, Rafael A.
14 pages, 7 figures, 1 table, This study evaluates the technical and environmental viability of reinserting post-consumer high-density polyethylene (rPE) recovered from end-of-life vehicle (ELV) multilayer fuel tanks into blowmoulding–grade blends. Virgin tank-grade HDPE was compounded with 50, 75, and 90 wt% rPE and assessed by multimodal characterization, including thermal and molecular analyses, AFM/SEM morphology, tensile/flexural/impact testing, linear viscoelasticity, capillary rheology, and uniaxial extensional rheology. All blends displayed viscoelastic and capillary flow behaviour comparable to the virgin grade and showed consistent strain hardening across compositions. The 90 wt% rPE/10 wt% virgin blend maintained melt strength and mechanical performance after up to ten extrusion cycles, with only minor microstructural refinement and no measurable deterioration of bulk properties. A cradle-to-gate mini–life cycle assessment (per 1 kg compound) indicates substantial climate benefits, corresponding to approximately 1.2–1.5 kg CO<inf>2</inf>e avoided per kg for the 90 wt% rPE formulation (depending on the electricity mix). Overall, the results show that very high recycled content can be achieved without compromising processability or stability, thereby supporting circular economy strategies for automotive polymers., Grant TED2021-130820B-C21 funded by MCIN/AEI/10.13039/ 501100011033 and by the “European Union NextGenerationEU/PRTR”. The authors wish to thank the MICIN (Ministerio de Ciencia e Innovacion), Spain, for funding under grant PID2019-107710 GB-I00., Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Titanium-catalyzed synthesis of polymyrcene and polyanethol and application as sustainable additives for poly(lactic acid)

  • Vinueza Vaca, Joan Martín|||0000-0002-0885-6394
  • Franco-Mateo, Emma
  • Sessini, Valentina|||0000-0003-1205-4586
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Souza Egipsy, Virginia
  • Ramos, Javier
  • Vega, Juan F
  • Jiménez Pindado, Gerardo Javier|||0000-0002-7057-4750
  • Tabernero Magro, María Vanessa|||0000-0003-1054-1663
The replacement of fossil-derived plastics with those obtained from bio-based resources, which present suitable performance to be employed as commodity plastics is currently an important field of research, given the urgent need to transition from a fossil-based to a more sustainable economy. In this context, this work is focused on the application of a catalytic system based on silsesquioxane-cyclopentadienyl titanium complexes for the preparation of bio-based polymers, which can be used as additives to improve the poor material properties of a biodegradable polymer such as poly(lactic acid) (PLA). These titanium complexes, when activated with methylaluminoxane or with triflate salts, are shown to be capable of the polymerization of two bio-based monomers: myrcene and anethole. It is notable that polymerizations with these two distinct monomers take place through different mechanisms. The resulting polymyrcene (PMy) and polyanethol (PAN) have been applied as modifiers for PLA. Binary blends of PMy and PLA exhibited a considerable decrease in Tg and the promotion of PLA crystallization for a PMy content below 15 wt%. The mechanical properties of the PLA/PMy blends also displayed plasticization, with a decrease in the elastic modulus and enhanced plasticity, which resulted in less fragile systems compared to pure PLA. Morphological analysis has indicated a partially miscible, phase-separated system with micron-sized domains. In contrast, PAN completely inhibited PLA crystallization and the PLA/PAN blends were immiscible, but well-dispersed, a phase-separated system was obtained in solvent-casting film preparation with very small PAN domains. The blends showed higher tensile modulus than pure PLA and an absence of plastic behaviour, resulting in more fragile systems upon the addition of PAN to PLA., Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, Universidad de Alcalá