Pasar al contenido principal

Design of multifunctional stimuli responsive bioplastics and biocomposites for emerging applications

RYC2021-033921-I

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Desarrollar, Atraer y Retener Talento
Subprograma Subprograma Estatal de Incorporación
Convocatoria Ramón y Cajal
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ALCALA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

N-Heterocyclic Carbene-Carbodiimide (NHC-CDI) Betaines as Organocatalysts for β-Butyrolactone Polymerization: Synthesis of Green PHB Plasticizers with Tailored Molecular Weights

  • Sánchez-Roa, David
  • Sessini, Valentina
  • Mosquera, Marta E.G.
  • Cámpora, Juan
The manufacture of poly(3-hydroxybutyrate) (PHB) stands out as a promising alternative to traditional plastics. This polymer is usually produced by bacteria-based biotechnology or metal-catalyzed ring-opening polymerization (ROP) of β-butyrolactone (β-BL). Nevertheless, commercial PHB suffers from different issues, from poor processability to high production costs. Herein, we report the chemical synthesis of PHB from the ROP of rac-β-butyrolactone promoted by a zwitterionic organocatalyst, an N-heterocyclic carbene-carbodiimide (NHC-CDI) betaine adduct. This reaction has been investigated by a combination of experimental and computational methods. The catalyst cleaves the β-BL via nucleophilic displacement of the C-O(carboxyl) bond followed by intramolecular elimination to give protonated betaine-crotonate ion pairs, the active polymerization initiators. Polymer growth is propagated and controlled by these betaine ion pairs, which render amorphous low-molecular-weight PHBs by an unusual mechanism with rapid chain transfer to the monomer regime, analogous to the well-known mechanism of ethylene oligomerization with late transition-metal catalysts. The resulting material is suitable as a biodegradable and biocompatible plasticizer for commercial bacterial or synthetic PHB. Perfect compatibility between the matrix and the additive and a significant reduction of the crystallinity resulted in a more flexible and resilient material., This work was supported by the Ministerio de Ciencia e Innovación (Spain) (TED2021-130871B-C22, PGC2018-095768-B-100 and Thematic Network “OASIS” RED2022-134074-T), Comunidad de Madrid (EPU-INV/2020/001), Junta de Andalucía (PY20_0104), and the University of Alcalá (UAH-AE-2017-2). V.S. would like to thank the Ministerio de Ciencia e Innovación (Spain) and the European Community (Grant Number: RYC2021-033921-I) for the financial support. D.S.-R. thanks the Spanish Government for a Predoctoral Fellowship. The authors gratefully acknowledge Dra. Lucía Álvarez Miguel (UAH) for her assistance in the X-ray data collection and Dr. Javier López-Prados and Dra. Gloria Gutiérrez-Alcalá (Mass Spectrometry services, CIC-Cartuja and IIQ) for sample preparation and recording Maldi-TOF and ESI mass spectra of polymers., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Key factors affecting the piezoelectric response of poly-L-lactic acid electrospun fibers

  • Rentero, C.
  • Amorín, Harvey
  • Jiménez, Ricardo
  • Mosquera, M.E.G.
  • Sessini, V.
Piezoelectric materials are increasingly explored as self-powered platforms in regenerative medicine and tissue engineering. Poly-L-lactic acid (PLLA) is particularly promising for biomedical applications due to its biodegradability, especially when processed via electrospinning which allows simultaneous fiber alignment and chain orientation. However, the mechanisms that enable and enhance the piezoelectric properties of PLLA remain insufficiently understood. This study employs a design-of-experiment approach to systematically examine the effects of chiral purity, molecular weight, and crystallinity on the resulting piezoelectric response of PLLA. In this work, highly aligned electrospun microfibers were successfully fabricated, revealing a direct relationship between the piezoelectric response and the processing method due to dipole orientation along the polymer chains through electrospinning. The piezoelectric properties were strongly influenced by crystallinity and chain orientation. The most crystalline sample (52 %) is characterized by high chiral purity and lower D-isomer content, showing the highest piezoelectric response, while samples with higher D-isomer content exhibited the lowest crystallinity and performance. Thermal treatment at 100 °C enhanced the crystallization of the oriented metastable phase in the as-spun fibers, resulting in increased melting temperature. Samples initially exhibiting amorphous or metastable phases displayed a significant increase in crystallinity and piezoelectric response following thermal treatment, highlighting the potential of controlling crystallization for optimizing piezoelectric performance in biomedical applications. © 2025 Elsevier B.V., All rights reserved., This work was supported by Ministerio de Ciencia e Innovación (Spain) (PID2023-152475OB-100, PID2021-122708OB-C33, TED2021-130871B–C22 and TED2021-130871B–C21), funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ERDF A way of making Europe by the “European Union” or by the “European Union NextGeneration EU/PRTR”; Comunidad de Madrid (EPU-INV/2020/001), and the University of Alcalá (UAH-AE-2017-2). V.S. would like to thank the Ministerio de Ciencia e Innovación (Spain) and the European Community (grant number: RYC2021-033921-I) for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bio-based poly(ethylene brassylate) as a sustainable high-performance thermoplastic: Insights into its crystalline morphology, mechanical properties and rheology

  • Rentero, Christian
  • Sotillo, Alberto
  • Souza-Egipsy, Virginia
  • Vega, Juan Francisco
  • Sessini, Valentina
  • Mosquera, Marta E.G.
14 pages, 17 figures, 5 tables, High-molecular-weight poly(ethylene brassylate) (PEB), a biobased and biodegradable polyester, was synthesized via ring-opening polymerization of ethylene brassylate using a highly active sodium phenoxide catalyst. Reaction conditions were optimized to achieve full monomer conversion and molecular weights up to 600 kDa. A comprehensive characterization has been performed that evidence the strong influence of the molecular weight in the thermal, mechanical, and rheological properties. Differential scanning calorimetry and WAXS confirmed a semicrystalline structure with multiple melting peaks and decreasing crystallinity as molecular weight increased. Mechanical testing revealed a transition from polyethylene-like behavior to a highly ductile, high-strain response in high-M<inf>w</inf> samples, characterized by exceptional extensibility profile. Rheological analysis provided evidence of long-chain branching in polymers prepared without coinitiator, significantly affecting the viscoelastic response and extensional flow. These findings highlight PEB as a promising sustainable alternative to conventional polyolefins, combining favorable thermal stability, tunable mechanical properties, and processability for advanced applications such as packaging, 3D printing, and shape-memory materials., This work was supported by Ministerio de Ciencia e Innovacion (Spain) PID2021-122708OB-C33, funded by MCIN/AEI/10.13039/ 501100011033 and, as appropriate, by ERDF A way of making Europe by the “European Union” or by the “European Union NextGeneration EU/PRTR”; Comunidad de Madrid (EPU-INV/2020/001), and the University of Alcala (UAH-AE-2017-2). V.S. would like to thank the Ministerio de Ciencia e Innovacion (Spain) and the European Community (grant number: RYC2021-033921-I) for the financial support. C.R. would like to thank University of Alcala for a fellowship. J.F.V. acknowledges CSIC for funding under the grant PIE202250E035. The MACROMOLECULAR PHYSICS Service at the IEM-CSIC is acknowledged for granting the use of the rheology facilities., Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Titanium-catalyzed synthesis of polymyrcene and polyanethol and application as sustainable additives for poly(lactic acid)

  • Vinueza Vaca, Joan Martín|||0000-0002-0885-6394
  • Franco-Mateo, Emma
  • Sessini, Valentina|||0000-0003-1205-4586
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Souza Egipsy, Virginia
  • Ramos, Javier
  • Vega, Juan F
  • Jiménez Pindado, Gerardo Javier|||0000-0002-7057-4750
  • Tabernero Magro, María Vanessa|||0000-0003-1054-1663
The replacement of fossil-derived plastics with those obtained from bio-based resources, which present suitable performance to be employed as commodity plastics is currently an important field of research, given the urgent need to transition from a fossil-based to a more sustainable economy. In this context, this work is focused on the application of a catalytic system based on silsesquioxane-cyclopentadienyl titanium complexes for the preparation of bio-based polymers, which can be used as additives to improve the poor material properties of a biodegradable polymer such as poly(lactic acid) (PLA). These titanium complexes, when activated with methylaluminoxane or with triflate salts, are shown to be capable of the polymerization of two bio-based monomers: myrcene and anethole. It is notable that polymerizations with these two distinct monomers take place through different mechanisms. The resulting polymyrcene (PMy) and polyanethol (PAN) have been applied as modifiers for PLA. Binary blends of PMy and PLA exhibited a considerable decrease in Tg and the promotion of PLA crystallization for a PMy content below 15 wt%. The mechanical properties of the PLA/PMy blends also displayed plasticization, with a decrease in the elastic modulus and enhanced plasticity, which resulted in less fragile systems compared to pure PLA. Morphological analysis has indicated a partially miscible, phase-separated system with micron-sized domains. In contrast, PAN completely inhibited PLA crystallization and the PLA/PAN blends were immiscible, but well-dispersed, a phase-separated system was obtained in solvent-casting film preparation with very small PAN domains. The blends showed higher tensile modulus than pure PLA and an absence of plastic behaviour, resulting in more fragile systems upon the addition of PAN to PLA., Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Copolymerization of beta-butyrolactones into functionalized polyhydroxyalkanoates using aluminum catalysts: influence of the initiator in the ring-opening polymerization mechanism

  • Palenzuela Cebrián, Miguel|||0000-0002-1003-6803
  • Mula Herrero, Esther
  • Blanco, Carlos
  • Sessini , Valentina|||0000-0003-1205-4586
  • Shakaroun, Rama M.
  • Li, Hui
  • Guillaume, Sophie M.
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
14 p., Within bioplastics, natural poly(3-hydroxybutyrate) (PHB) stands out as fully biocompatible and biodegradable, even in marine environments; however, its high isotacticity and crystallinity limits its mechanical properties and hence its applications. PHB can also be synthesized with different tacticities via a catalytic ring-opening polymerization (ROP) of rac-?-butyrolactone (BBL), paving the way to PHB with better thermomechanical and processability properties. In this work, the catalyst family is extended based on aluminum phenoxy-imine methyl catalyst [AlMeL2], that reveals efficient in the ROP of BBL, to the halogeno analogous complex [AlClL2]. As well, the impact on the ROP mechanism of different initiators is further explored with a particular focus in dimethylaminopyridine (DMAP), a hardly studied initiator for the ROP of BBL. A thorough mechanistic study is performed that evidences the presence of two concomitant DMAP-mediated mechanisms, that lead to either a DMAP or a crotonate end-capping group. Besides, in order to increase the possibilities of PHB post-polymerization functionalization, the introduction of a side-chain functionality is explored, establishing the copolymerization of BBL with ?-allyloxymethylene propiolactone (BPLOAll), resulting in well-defined P(BBL-co-BPLOAll) copolymers., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Unión Europea
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

A greener process for poly-L-lactic acid production and chemical upcycling under mild conditions using highly active alkali-metal based catalysts

  • Rentero Llorente, Christian|||0000-0001-6087-762X
  • Gaeta, Licia
  • Palenzuela Cebrián, Miguel|||0000-0002-1003-6803
  • Sessini , Valentina|||0000-0003-1205-4586
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
12 p., Non-toxic potassium and sodium metal compounds have been prepared with a bulky aryloxide ligand MOR (1,2), as well, their counterparts containing a crown ether bonded to the alkali metal (3, 4), and fully characterized. The activity of compounds 1?4 as catalysts for the ring-opening polymerization (ROP) process of LLA have been studied, showing that they are extremely active and able to polymerize LLA within a few minutes under mild conditions, achieving PLLA with high molecular weight, similar to the commercial ones. For derivatives 3 and 4, the crown ether coordination to the alkali metal affects the nuclearity of the compounds and consequently its activity, giving a more controlled polymerization. As well the use of BnOH as co-initiator allowed a better control over the polymerization. Detailed studies of the polymerization mechanism have been performed, which confirmed an anionic mechanism in absence of a co-initiator. Furthermore, the nature of the mechanisms provokes the epimerization of the lactide and the existence of D-isomers in the PLLA. Since the percentage of Disomer content in the polymeric chain as well as its distribution can strongly change the properties of PLLA a detailed analysis has been performed. As expected, the different isotacticity leads to a strong variation on the thermal properties. We have also compared the mechanical properties of the different synthetized PLLA, and we clearly observed that the epimerization reactions lead to an increase of the PLLA flexibility compared with commercial PLAs. Furthermore, the alkali metal compounds prepared not only polymerize, as well in the presence of an alcohol they can depolymerized PLLA within 15 min to give alkyl lactates, allowing the easy upcycling of commercial PLLAs., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Unión Europea
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Role of α and δ' phases in the piezoelectric response of in situ poled electrospun ferroelectric polyamide 11 fibers

  • Leonés Gil, Adrián Luis
  • Pascual González, Cristina
  • Amorín, Harvey
  • Fernández Blázquez, Juan P.
  • Algueró, Miguel
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Sessini , Valentina|||0000-0003-1205-4586
15 p., In situ poling of amine dipoles in ferroelectric polyamide 11 (PA11) fibers directly obtained from electrospinning is demonstrated. The combined effect of thermal treatments and mechanical stretching on the crystalline phases and the crystals orientation in the electrospun fibers has been studied. The electrospun PA11 fibers exhibited oriented alpha and & ouml;' phases with Hermans orientation factor, fc, of 0.40 and 0.42, both contributing to the piezoelectric response under transverse mechanical stress (d31 of 0.17 pC/N). Enhanced piezoelectric response was obtained when the PA11 sample was stretched at 15 % of strain ratio, that corresponds to its yield point. Once PA11 transits from elastic to plastic regime, an increase in the degree of crystallinity is observed (Xc of 24.9 %), along with a transition from the triclinic phase (alpha) to the pseudo-hexagonal phase (& ouml;'). The piezoelectric response was significantly increased once the material exceeded its yield point, at which a large piezoelectric coefficient d33 of 0.37 pC/N had resulted. Thermal treatment at 100 degrees C of PA11 fibers also resulted in preferential crystallographic orientation alpha and of & ouml;' phase (fc of 0.47 and 0.44), which is favoured by both mechanical stretching and heat treatment. These findings reveal the strong correlation between the mechanical and thermal treatment, crystalline phases and piezoelectric performance of in situ poled electrospun PA11 fibers., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Unión Europea
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Upcycling orange-based waste into functional CNCs for greener L-lactide ring-opening polymerization

  • Leonés Gil, Adrián Luis
  • Sánchez Solís, Cayetano
  • Medel García, Asier
  • García Aparicio, María P.
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Sessini , Valentina|||0000-0003-1205-4586
20 p., This study demonstrates the valorization of orange peel waste as a sustainable feedstock for the production of cellulose nanocrystals (CNCs). Compositional analysis revealed a cellulose content up to 10.0% in the raw material. After performing the alkaline/peroxide treatment, CNCs were isolated via acid hydrolysis. Different inorganic acids were compared, namely sulfuric, phosphoric, and hydrochloric acids at low molar concentrations. The resulting CNCs showed distinct morphological and physicochemical properties, with sulfuric acid treatment yielding the highest crystallinity index (TCI) of 0.86 under conditions of 3.0 mol/L, 80 ?C, and 225 min. Additionally, the presence of sulfate or phosphate groups significantly influenced the thermal degradation behavior and the inorganic residue content in the obtained CNCs. Finally, the CNCs were successfully tested as co-initiator for lactide ring-opening polymerization. The results show that the molecular weights of the resulting polylactide varied depending on the CNC dispersion. This work supports the use of orange peel waste as a bio-source for CNC production and their potential application as a co-initiator in the synthesis of polyesters., Universidad de Alcalá, Ministerio de Ciencia e Innovación, Unión Europea
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Functionalization of polyolefins via catalytic nitrene addition

  • Pérez Ruíz, Jorge
  • Ramírez Chamond, Manuel Rafael|||0000-0003-4598-339X
  • Rentero Llorente, Christian|||0000-0001-6087-762X
  • Sessini , Valentina|||0000-0003-1205-4586
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Díaz Requejo, M. Mar
  • Pérez, Pedro J.
7 p., The post-polymerization functionalization of polyolefins has emerged as a key tool for obtaining new materials with enhanced properties. With an array of approaches being already reported, the incorporation of N-containing fragments en route to the generation of amino groups in yet scarce and not disclosed for the metal-catalyzed nitrene transfer strategy. Here we introduce such tactics employing silver-based catalysts for the incorporation of nitrene NTs (Ts = p-toluenesulfonyl) groups to commercially available polybutadienes. The process occurs at room temperature without appreciable chain scission or cross-linking processes and enables precise control of the degree of functionalization. Thermal analyses demonstrate a correlation between such degree and the T g values of the functionalized polymers., Ministerio de Ciencia e Innovación, Junta de Andalucía, Universidad de Huelva, Universidad de Alcalá, Unión Europea
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Key factors affecting the piezoelectric response of poly-L-lactic acid electrospun fibers

  • Rentero Llorente, Christian|||0000-0001-6087-762X
  • Amorín, Harvey
  • Jiménez, Ricardo
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Sessini , Valentina|||0000-0003-1205-4586
10 p., Piezoelectric materials are increasingly explored as self-powered platforms in regenerative medicine and tissue engineering. Poly-L-lactic acid (PLLA) is particularly promising for biomedical applications due to its biodegradability, especially when processed via electrospinning which allows simultaneous fiber alignment and chain orientation. However, the mechanisms that enable and enhance the piezoelectric properties of PLLA remain insufficiently understood. This study employs a design-of-experiment approach to systematically examine the effects of chiral purity, molecular weight, and crystallinity on the resulting piezoelectric response of PLLA. In this work, highly aligned electrospun microfibers were successfully fabricated, revealing a direct relationship between the piezoelectric response and the processing method due to dipole orientation along the polymer chains through electrospinning. The piezoelectric properties were strongly influenced by crystallinity and chain orientation. The most crystalline sample (52 %) is characterized by high chiral purity and lower Disomer content, showing the highest piezoelectric response, while samples with higher D-isomer content exhibited the lowest crystallinity and performance. Thermal treatment at 100 ?C enhanced the crystallization of the oriented metastable phase in the as-spun fibers, resulting in increased melting temperature. Samples initially exhibiting amorphous or metastable phases displayed a significant increase in crystallinity and piezoelectric response following thermal treatment, highlighting the potential of controlling crystallization for optimizing piezoelectric performance in biomedical applications., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Unión Europea, Fondo Europeo de Desarrollo Regional