Pasar al contenido principal

APROXIMACION INNOVADORA HACIA DISPOSITIVOS DE NANOENERGIA Y SENSORES BASADOS EN BIOPOLIMEROS IMPRESOS EN 3D

PID2023-152475OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Key factors affecting the piezoelectric response of poly-L-lactic acid electrospun fibers

  • Rentero, C.
  • Amorín, Harvey
  • Jiménez, Ricardo
  • Mosquera, M.E.G.
  • Sessini, V.
Piezoelectric materials are increasingly explored as self-powered platforms in regenerative medicine and tissue engineering. Poly-L-lactic acid (PLLA) is particularly promising for biomedical applications due to its biodegradability, especially when processed via electrospinning which allows simultaneous fiber alignment and chain orientation. However, the mechanisms that enable and enhance the piezoelectric properties of PLLA remain insufficiently understood. This study employs a design-of-experiment approach to systematically examine the effects of chiral purity, molecular weight, and crystallinity on the resulting piezoelectric response of PLLA. In this work, highly aligned electrospun microfibers were successfully fabricated, revealing a direct relationship between the piezoelectric response and the processing method due to dipole orientation along the polymer chains through electrospinning. The piezoelectric properties were strongly influenced by crystallinity and chain orientation. The most crystalline sample (52 %) is characterized by high chiral purity and lower D-isomer content, showing the highest piezoelectric response, while samples with higher D-isomer content exhibited the lowest crystallinity and performance. Thermal treatment at 100 °C enhanced the crystallization of the oriented metastable phase in the as-spun fibers, resulting in increased melting temperature. Samples initially exhibiting amorphous or metastable phases displayed a significant increase in crystallinity and piezoelectric response following thermal treatment, highlighting the potential of controlling crystallization for optimizing piezoelectric performance in biomedical applications. © 2025 Elsevier B.V., All rights reserved., This work was supported by Ministerio de Ciencia e Innovación (Spain) (PID2023-152475OB-100, PID2021-122708OB-C33, TED2021-130871B–C22 and TED2021-130871B–C21), funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ERDF A way of making Europe by the “European Union” or by the “European Union NextGeneration EU/PRTR”; Comunidad de Madrid (EPU-INV/2020/001), and the University of Alcalá (UAH-AE-2017-2). V.S. would like to thank the Ministerio de Ciencia e Innovación (Spain) and the European Community (grant number: RYC2021-033921-I) for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of α and δ’ phases in the piezoelectric response of in situ poled electrospun ferroelectric polyamide 11 fibers

  • Leonés, A.
  • Pascual-González, Cristina
  • Amorín, Harvey
  • Fernandez-Blazquez, J.P.
  • Algueró, Miguel
  • Mosquera, M.E.G.
  • Sessini, V.
In situ poling of amine dipoles in ferroelectric polyamide 11 (PA11) fibers directly obtained from electrospinning is demonstrated. The combined effect of thermal treatments and mechanical stretching on the crystalline phases and the crystals orientation in the electrospun fibers has been studied. The electrospun PA11 fibers exhibited oriented α and δ’ phases with Hermans orientation factor, f<inf>c</inf>, of 0.40 and 0.42, both contributing to the piezoelectric response under transverse mechanical stress (d<inf>31</inf> of 0.17 pC/N). Enhanced piezoelectric response was obtained when the PA11 sample was stretched at 15 % of strain ratio, that corresponds to its yield point. Once PA11 transits from elastic to plastic regime, an increase in the degree of crystallinity is observed (X<inf>c</inf> of 24.9 %), along with a transition from the triclinic phase (α) to the pseudo-hexagonal phase (δ’). The piezoelectric response was significantly increased once the material exceeded its yield point, at which a large piezoelectric coefficient d<inf>33</inf> of 0.37 pC/N had resulted. Thermal treatment at 100 °C of PA11 fibers also resulted in preferential crystallographic orientation α and of δ’ phase (f<inf>c</inf> of 0.47 and 0.44), which is favoured by both mechanical stretching and heat treatment. These findings reveal the strong correlation between the mechanical and thermal treatment, crystalline phases and piezoelectric performance of in situ poled electrospun PA11 fibers. © 2025 Elsevier B.V., All rights reserved., This work was supported by Ministerio de Ciencia e Innovación (Spain) (PID2023-152475OB-100, PID2021-122708OB-C33, PID2021-122708OB-C31, TED2021-130871B-C22 and TED2021-130871B-C21), funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ERDF A way of making Europe by the “European Union” or by the “European Union NextGeneration EU/PRTR”; Comunidad de Madrid (EPU-INV/2020/001), and the University of Alcalá (UAH-AE-2017-2). V.S. and C.P.G. would like to thank the Ministerio de Ciencia e Innovación (Spain) and the European Community (grant number: RYC2021-033921-I and RYC2021-034194-I) for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailorable Piezoelectric Chain Morphology in Biocompatible Poly-l-lactide Induced by Melt-Based 3D Printing

  • Pascual-González, Cristina
  • Pacheco-Carpio, Gustavo
  • Fernandez-Blazquez, J.P.
  • Serrano, María C.
  • Wicklein, Bernd
  • Algueró, Miguel
  • Amorín, Harvey
Biobased and biodegradable poly-l-lactide (PLLA) stands out among piezoelectric polymers for its biocompatibility and environmental sustainability. Its piezoelectric response is closely related to the crystallinity and the alignment of polymer chains, which is conventionally obtained by drawing techniques. These are two-step processes with tight shape constraints, and the material technology implementation would strongly benefit from the demonstration of a single-step process capable of directly achieving tailored piezoelectric morphology in PLLA biopolymer from polymer melt. Fused deposition modeling (FDM) three-dimensional (3D) printing can play this role, directly achieving tailored piezoelectric morphology in PLLA biopolymer by the microscale control of molecular chain orientation through preparation parameters, such as 3D printing speed or bed temperature. The printing-crystal phase content and texture-piezoelectric property relationships are comprehensively presented, and the key 3D printing parameters to obtain optimized piezoelectric chain morphologies are defined. Results reveal melt-based 3D printing to be a suitable technique for manufacturing biocompatible PLLA piezoelectric platforms that are also biodegradable. A commercial PLLA (molecular weight of 160 kDa) has been used, with which a large shear piezoelectric coefficient (d<inf>14</inf> = 8.5 pC/N) was attained after optimized printing. Biocompatibility in vitro with murine L929 fibroblasts is confirmed for this specific material, opening its use not only for smart monitoring but also for biomedical applications, including tissue engineering. © 2025 Elsevier B.V., All rights reserved., Research was funded by projects PID2023-152475OB-100, PID2021-122708OB-C33, CNS2023-144808, and TED2021-130871B–C21, funded by MCIN/AEI/10.13039/501100011033, and, as appropriate, by ERDF A way of making Europe by the “European Union” or by the “European Union NextGeneration EU/PRTR”. CPG and BW also acknowledge the support of Ramón y Cajal programme (grant RYC2021-034194-I, RYC2021-034164-I). Víctor Caz is acknowledged for assistance with biocompatibility studies. The Advanced Light Microscopy Service at the Centro Nacional de Biotecnología (CNB–CSIC) is acknowledged for assistance with confocal microscopy studies and the Scanning Electron Microscopy Service at the Instituto de Micro y Nanotecnología (IMN-CSIC) for FE-SEM. The MiNa Laboratory at IMN-CSIC acknowledges funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4 × 10–1794), and EU (FEDER, FSE)., Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Influence of molecular weight on the printability and piezoelectric morphology of melt-based 3D printed poly-L-lactic acid

  • Pascual González, Cristina
  • Vergara, Guillermo
  • Fernández Blázquez, Juan P.
  • Leonés Gil, Adrián Luis
  • Sessini , Valentina|||0000-0003-1205-4586
  • Wicklein, Bernd
  • Algueró, Miguel
  • Amorín, Harvey
12 p., Fused deposition modeling (FDM) 3D printing has been demonstrated capable of directly producing tailored piezoelectric morphology in poly-L-lactide (PLLA). This is an additive manufacturing technique that has been shown strong potential for developing complex and highly customized smart structures for sensing and actuation, yet relationships between printing, microstructure, and piezoelectric response remain largely unexplored. This work shows that both the molecular weight of the polymer and the printing trajectory critically impact the resulting shear piezoelectric coefficient of 3D-printed laminates. This is accomplished by printing PLLA from two raw sources with well-differentiated molecular weight and using either linear or concentric infill patterns. Results indicate that printing following concentric patterns enhances crystallization and crystal orientation, associated with more favoured thermal history during printing that minimizes chain relaxation and crystal disorientation. Besides, the high molecular weight PLLA showed higher piezoelectric response, despite its slightly lower crystalline fraction. The role of molecular chain entanglements in limiting crystal disorientation is discussed, along with the effect of the size and periodicity of the crystalline lamellas, whose variations are more noticeable in the low molecular weight system., Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional, Unión Europea, Comunidad de Madrid, Ministerio de Ciencia, Innovación y Universidades