Pasar al contenido principal

INGENIERIA DE DEFECTOS PUNTUALES Y DE SUPERFICIE PARA EL CONTROL DE INTERACCIONES ENTRE PARTICULA CERAMICA Y MATRIZ POLIMERICA EN MATERIALES COMPUESTOS HIBRIDOS INTELIGENTES

PID2021-122708OB-C33

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advanced Cellulose–Nanocarbon Composite Films for High-Performance Triboelectric and Piezoelectric Nanogenerators

  • González, Jaime
  • Ghaffarinejad, Ali
  • Ivanov, Maxim
  • Ferreira, Paula
  • Vilarinho, Paula M.
  • Borrás, Ana
  • Amorín, Harvey
  • Wicklein, Bernd
Natural polymers such as cellulose have interesting tribo- and piezoelectric properties for paper-based energy harvesters, but their low performance in providing sufficient output power is still an impediment to a wider deployment for IoT and other low-power applications. In this study, different types of celluloses were combined with nanosized carbon fillers to investigate their effect on the enhancement of the electrical properties in the final nanogenerator devices. Cellulose pulp (CP), microcrystalline cellulose (MCC) and cellulose nanofibers (CNFs) were blended with carbon black (CB), carbon nanotubes (CNTs) and graphene nanoplatelets (GNPs). The microstructure of the nanocomposite films was characterized by scanning electron and probe microscopies, and the electrical properties were measured macroscopically and at the local scale by piezoresponse force microscopy. The highest generated output voltage in triboelectric mode was obtained from MCC films with CNTs and CB, while the highest piezoelectric voltage was produced in CNF-CNT films. The obtained electrical responses were discussed in relation to the material properties. Analysis of the microscopic response shows that pulp has a higher local piezoelectric d33 coefficient (145 pC/N) than CNF (14 pC/N), while the macroscopic response is greatly influenced by the excitation mode and the effective orientation of the crystals relative to the mechanical stress. The increased electricity produced from cellulose nanocomposites may lead to more efficient and biodegradable nanogenerators., This research was supported through the grants PID2019-107022RJ-I00, RYC2021-034164-I and PID2021-122708OB-C33, funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”, is acknowledged. AB and AG thank the ERC StG 3Dscavengers (grant agreement number 851929). MI, PF, and PV thank project CICECO-Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020 and LA/P/0006/2020, financed by national funds through the FCT/MCTES (PIDDAC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fine-grained high-performance Ba0.85Ca0.15 Zr0.1Ti0.9O3 piezoceramics obtained by current-controlled flash sintering of nanopowders

  • López-Blanco, Samuel
  • Ochoa, Diego A.
  • Amorín, Harvey
  • Castro, Alicia
  • Algueró, Miguel
  • García, José E.
[EN] Due to environmental concerns, extensive research has been carried out to develop high-performance lead-free piezoceramics capable of replacing commercial lead-based materials. The lead-free (BaCa)TiO −Ba(ZrTi)O system has emerged as a candidate for room temperature transducer applications because a high piezoelectric charge coefficient is achieved in this system for compositions at the morphotropic phase boundary. However, conventional ceramic processing of these eco-friendly piezoceramics demands high energy consumption because long-lasting, high-temperature heat treatments are needed, which often lead to microstructural degradation that compromises the material reliability. Field-assisted flash sintering has started to be explored since the application of an adequate electric field was shown to significantly reduce the sintering time and temperature, thereby controlling grain growth. In this work, BaCaZrTiO ceramics are obtained by current-controlled flash sintering of mechanosynthesized nanopowders. Exhaustive control of the sintering parameters allows tailoring of the microstructure, which allows dense fine-grained flash-sintered ceramics exhibiting a high electric field-induced strain response to be obtained., This work was supported by the Agencia Estatal de Investigación (AEI), Spain, projects PGC2018-099158-B-I00 and PID2021–122708OB-C33. S. L-B. thanks Agència de Gestió d′Ajuts Universitaris i de Recerca (AGAUR), Catalonia, Spain, for the FI-SDUR contract (2020 FISDU 00489)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetoelectric properties of CoFe2O4/BNT–BT0.08 biphasic nanocomposites, with 0–3 connectivity, prepared by sol-gel method

  • Cernea, Marin
  • Radu, Roxana
  • Amorín, Harvey
  • Vasile, Bogdan Stefan
  • Surdu, Vasile Adrian
  • Trusca, Roxana
  • Gavrila, Raluca
  • Galassi, Carmen
[EN] Motivated by the goal of developing ultralow power, smart and multifunctional nano (micro) electronic devices, research has shown unwavering interest in synthesis methods, architectures and interphase connectivity of composites containing magnetostrictive and piezoelectric phases, known as magnetoelectric (ME) materials. Herein we report on CoFeO/BiNaTiO–BaTiO biphasic ME composites, obtained by sol-gel chemistry, by mixing the precursor sols of the two phases into one precursor sol and further transforming it into gel, with the goal of obtaining homogeneous nanocomposites with magnetoelectric properties. The structural properties, the temperature dependance of dielectric properties, the magnetic and magnetoelectric properties of these biphasic mixtures, with various molar ratios CoFeO/BNT–BT = 0.5:1, 1:1 and 1.5:1, are investigated. It is observed that the amount of CoFeO and the synthesis in situ of these composites influences their macroscopic properties showing a high difficulty of carrying out an efficient poling resulting in small piezoelectric and magnetoelectric response. It was concluded that the synthesis procedure, the type of architecture and the interphase connectivity are of outmost importance for magnetoelectric properties based on lead-free materials., The authors gratefully acknowledge the financial support from Core Program PN19-0.3 (Contract No. 21N/08.02.2019) from the Romanian Ministry of Research. H. Amorín acknowledges financial support from Spanish MINECO projects MAT2017-88788-R and PID2021-122708OB-C33, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights into the Early Size Effects of Lead-Free Piezoelectric Ba0.85Ca0.15Zr0.1Ti0.9O3

  • Amorín, Harvey
  • Venet, Michel
  • García, José E.
  • Ochoa, Diego A.
  • Ramos, Pablo
  • López-Sánchez, Jesús
  • Rubio-Zuazo, J.
  • Castro, Alicia
  • Algueró, Miguel
[EN] Ba0.85Ca0.15Zr0.1Ti0.9O3 (BCZT) stands out among lead-free ferroelectric oxides under consideration to replace state-of-the-art high-sensitivity piezoelectric Pb(Zr,Ti)O3, for a range of energy conversion ceramic technologies. However, the best performances have been reported for very coarse-grained materials, and attempts to refine microstructure below 10 µm grain size consistently result in significant property degradation. Here a comprehensive study of the grain size effects on the properties of BCZT across the micron scale is reported, down to the verge of the submicron one. Results show a distinctive early evolution of properties for grain sizes between 1 and 5 µm. For the larger sizes in this range, an opposite effect is found for the piezoelectric charge coefficient and electric field-induced strain with respect to the very coarse-grained material, while very good overall performance is maintained. For the lower sizes, relaxor features appear, yet materials can still be poled indicating their ferroelectric nature. This strongly resembles size effects in the Pb(Mg1/3Nb2/3)O3-PbTiO3 system, driven by the slowing down of the relaxor to ferroelectric transition with size reduction, though kinetics seem to slow down across much larger grain sizes for BCZT. Concomitant changes in the polymorphic phase coexistence are described and discussed by synchrotron X-ray diffraction., Grants PID2021-122708OB-C33 and TED2021-130871B-C21 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ERDF A way of making Europe, by the “European Union” or by the “European Union NextGeneration EU/PRTR”. Research also supported by Ministerio de Ciencia e Innovación (MCINN) through project PIE 2021-60-E-030. The authors acknowledge the ESRF (The European Synchrotron), MCINN and Consejo Superior de Investigaciones Científicas (CSIC, Spain) for provision of synchrotron radiation facilities. M.V. thanks financial support by Sao Paulo Research Foundation FAPESP (Grants No. 2017/17872-1 and No. 2022/08030-5) and the Brazilian CNPq (Process No. 304144/2021-5). Technical support by Inmaculada Martínez (ICMM) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Flexible and multifunctional P(VDF-TrFE)/BT-BMT polymer composite films: Realizing high piezoelectric performance and electrocaloric effect

  • Coondoo, I.
  • Isfahani, V.B.
  • Amorín, Harvey
  • Bdikin, I.
  • Carvalho, J.
  • Pascual-González, Cristina
  • Silva, B.M.
  • Oliveira, J.
  • Pukazhselvan, D.
  • Almeida, B.G.
  • Miranda, G.
In the era of unprecedented advancement of portable electronics, the utilization of multifunctional materials that enable integration of functionalities, hold great promise since they not only reduce size and weight but also curtail energy consumption of the system. In this regard, this study focused on the development of polyvinylidene fluoride (PVDF)-based polymer composites and achieved excellent piezoelectric performance along with enhanced dielectric, ferroelectric and electrocaloric response. Novel flexible polymer composite films composed of P(VDF-TrFE) 55/45 polymer and BT-BMT (BaTiO<inf>3</inf>-0.2Bi(Mg<inf>0.5</inf>Ti<inf>0.5</inf>)O<inf>3</inf>) oxide filler particles were fabricated using cost-effective solution-casting method. The inclusion of BT-BMT fillers promoted ferroelectric β-phase formation, confirmed by X-ray diffraction (XRD), Fourier-transform infrared (FTIR) and Raman spectroscopy studies. The dielectric permittivity enhanced considerably with the incorporation of filler particles, while the dielectric loss remained low. An excellent piezoelectric coefficient, |d<inf>33</inf>| ∼41 pC/N was achieved in the optimal composite (5 wt% BT-BMT), which was nearly 58 % higher than that obtained in the pure copolymer (|d<inf>33</inf>| ∼26 pC/N). Furthermore, an improved electrocaloric performance in terms of electrocaloric temperature change (ΔT) and electrocaloric strength was noted. A ΔT ∼3.15 °C was achieved in the optimal composite film at a modest electric field of 60 MV/m. Additionally, the investigation of microscale piezoelectric and mechanical responses revealed a correlation with the macroscale properties and suggested a complex interplay of interphase effects (filler–polymer interface; crystalline–amorphous interface) in the films. Thus, this work highlights the significance of the BT-BMT fillers in enhancing prominent functional properties in the P(VDF-TrFE)/BT-BMT polymer composite films, thereby rendering them suitable for multifunctional flexible devices. © 2025 Elsevier B.V., All rights reserved., Coondoo and G. Miranda gratefully acknowledge support through the FCT project “MultiFlex” EXPL/CTM-CTM/0687/2021 (https://doi. org/10.54499/EXPL/CTM-CTM/0687/2021). The author, I. Coondoo would also like to acknowledge financial assistance by national funds (OE), through FCT – Fundaç˜ao para a Ciˆencia e a Tecnologia, I.P., through DL57/2016/CP1482/CT0048 (https://doi.org/10.54499/ DL57/2016/CP1482/CT0048). This work was partially developed within the scope of the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020 & LA/P/0006/2020, financed by national funds through the FCT/MEC (PIDDAC). V. B. Isfahani thank FCT for the grant from the project EXPL/CTM-CTM/0687/2021 and for her contract supported from the project with the reference UIDP/ 04968/2020. V. B. Isfahani also thank the support of Portuguese Foundation for Science and Technology (FCT) and IFIMUP, Portugal with the projects UIDB/04968/2020, UIDP/04968/2020 and LA/P/ 0095/2020 (Associate Laboratory, Laboratory of Physics for Materials and Emergent Technologies (LaPMET)). H. Amorín acknowledges the support through grants PID2021-122708OB-C33 and TED2021- 130871B-C21 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ERDF A way of making Europe, and by the “European Union NextGeneration EU/PRTR”. The support of Fundaç˜ao para a Ciˆencia e Tecnologia through FEDER (European Fund for Regional Development)-COMPETE-QREN-EU (ref. UID/FIS/04650/2013 and UID/FIS/04650/2019); E-Field—“Electric-Field Engineered Lattice Distortions (E-FiELD) for optoelectronic devices”, ref.: PTDC/NANMAT/ 0098/2020 and “Non-linear phononics: Manipulating the hidden quantum phases and dynamical multiferroicity”, Ref. 2022.03564. PTDC, is acknowledged. B. M. Silva, J. Oliveira and J. Carvalho acknowledge their Ph.D. grants from FCT, with references 2021.07277. BD, SFRH/BD/146886/2019 and 2024.00842.BD, respectively. We thank Ms. Phalguni Coondoo for the 3D illustrations., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of α and δ’ phases in the piezoelectric response of in situ poled electrospun ferroelectric polyamide 11 fibers

  • Leonés, A.
  • Pascual-González, Cristina
  • Amorín, Harvey
  • Fernandez-Blazquez, J.P.
  • Algueró, Miguel
  • Mosquera, M.E.G.
  • Sessini, V.
In situ poling of amine dipoles in ferroelectric polyamide 11 (PA11) fibers directly obtained from electrospinning is demonstrated. The combined effect of thermal treatments and mechanical stretching on the crystalline phases and the crystals orientation in the electrospun fibers has been studied. The electrospun PA11 fibers exhibited oriented α and δ’ phases with Hermans orientation factor, f<inf>c</inf>, of 0.40 and 0.42, both contributing to the piezoelectric response under transverse mechanical stress (d<inf>31</inf> of 0.17 pC/N). Enhanced piezoelectric response was obtained when the PA11 sample was stretched at 15 % of strain ratio, that corresponds to its yield point. Once PA11 transits from elastic to plastic regime, an increase in the degree of crystallinity is observed (X<inf>c</inf> of 24.9 %), along with a transition from the triclinic phase (α) to the pseudo-hexagonal phase (δ’). The piezoelectric response was significantly increased once the material exceeded its yield point, at which a large piezoelectric coefficient d<inf>33</inf> of 0.37 pC/N had resulted. Thermal treatment at 100 °C of PA11 fibers also resulted in preferential crystallographic orientation α and of δ’ phase (f<inf>c</inf> of 0.47 and 0.44), which is favoured by both mechanical stretching and heat treatment. These findings reveal the strong correlation between the mechanical and thermal treatment, crystalline phases and piezoelectric performance of in situ poled electrospun PA11 fibers. © 2025 Elsevier B.V., All rights reserved., This work was supported by Ministerio de Ciencia e Innovación (Spain) (PID2023-152475OB-100, PID2021-122708OB-C33, PID2021-122708OB-C31, TED2021-130871B-C22 and TED2021-130871B-C21), funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ERDF A way of making Europe by the “European Union” or by the “European Union NextGeneration EU/PRTR”; Comunidad de Madrid (EPU-INV/2020/001), and the University of Alcalá (UAH-AE-2017-2). V.S. and C.P.G. would like to thank the Ministerio de Ciencia e Innovación (Spain) and the European Community (grant number: RYC2021-033921-I and RYC2021-034194-I) for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailorable Piezoelectric Chain Morphology in Biocompatible Poly-l-lactide Induced by Melt-Based 3D Printing

  • Pascual-González, Cristina
  • Pacheco-Carpio, Gustavo
  • Fernandez-Blazquez, J.P.
  • Serrano, María C.
  • Wicklein, Bernd
  • Algueró, Miguel
  • Amorín, Harvey
Biobased and biodegradable poly-l-lactide (PLLA) stands out among piezoelectric polymers for its biocompatibility and environmental sustainability. Its piezoelectric response is closely related to the crystallinity and the alignment of polymer chains, which is conventionally obtained by drawing techniques. These are two-step processes with tight shape constraints, and the material technology implementation would strongly benefit from the demonstration of a single-step process capable of directly achieving tailored piezoelectric morphology in PLLA biopolymer from polymer melt. Fused deposition modeling (FDM) three-dimensional (3D) printing can play this role, directly achieving tailored piezoelectric morphology in PLLA biopolymer by the microscale control of molecular chain orientation through preparation parameters, such as 3D printing speed or bed temperature. The printing-crystal phase content and texture-piezoelectric property relationships are comprehensively presented, and the key 3D printing parameters to obtain optimized piezoelectric chain morphologies are defined. Results reveal melt-based 3D printing to be a suitable technique for manufacturing biocompatible PLLA piezoelectric platforms that are also biodegradable. A commercial PLLA (molecular weight of 160 kDa) has been used, with which a large shear piezoelectric coefficient (d<inf>14</inf> = 8.5 pC/N) was attained after optimized printing. Biocompatibility in vitro with murine L929 fibroblasts is confirmed for this specific material, opening its use not only for smart monitoring but also for biomedical applications, including tissue engineering. © 2025 Elsevier B.V., All rights reserved., Research was funded by projects PID2023-152475OB-100, PID2021-122708OB-C33, CNS2023-144808, and TED2021-130871B–C21, funded by MCIN/AEI/10.13039/501100011033, and, as appropriate, by ERDF A way of making Europe by the “European Union” or by the “European Union NextGeneration EU/PRTR”. CPG and BW also acknowledge the support of Ramón y Cajal programme (grant RYC2021-034194-I, RYC2021-034164-I). Víctor Caz is acknowledged for assistance with biocompatibility studies. The Advanced Light Microscopy Service at the Centro Nacional de Biotecnología (CNB–CSIC) is acknowledged for assistance with confocal microscopy studies and the Scanning Electron Microscopy Service at the Instituto de Micro y Nanotecnología (IMN-CSIC) for FE-SEM. The MiNa Laboratory at IMN-CSIC acknowledges funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4 × 10–1794), and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bio-based poly(ethylene brassylate) as a sustainable high-performance thermoplastic: Insights into its crystalline morphology, mechanical properties and rheology

  • Rentero, Christian
  • Sotillo, Alberto
  • Souza-Egipsy, Virginia
  • Vega, Juan Francisco
  • Sessini, Valentina
  • Mosquera, Marta E.G.
14 pages, 17 figures, 5 tables, High-molecular-weight poly(ethylene brassylate) (PEB), a biobased and biodegradable polyester, was synthesized via ring-opening polymerization of ethylene brassylate using a highly active sodium phenoxide catalyst. Reaction conditions were optimized to achieve full monomer conversion and molecular weights up to 600 kDa. A comprehensive characterization has been performed that evidence the strong influence of the molecular weight in the thermal, mechanical, and rheological properties. Differential scanning calorimetry and WAXS confirmed a semicrystalline structure with multiple melting peaks and decreasing crystallinity as molecular weight increased. Mechanical testing revealed a transition from polyethylene-like behavior to a highly ductile, high-strain response in high-M<inf>w</inf> samples, characterized by exceptional extensibility profile. Rheological analysis provided evidence of long-chain branching in polymers prepared without coinitiator, significantly affecting the viscoelastic response and extensional flow. These findings highlight PEB as a promising sustainable alternative to conventional polyolefins, combining favorable thermal stability, tunable mechanical properties, and processability for advanced applications such as packaging, 3D printing, and shape-memory materials., This work was supported by Ministerio de Ciencia e Innovacion (Spain) PID2021-122708OB-C33, funded by MCIN/AEI/10.13039/ 501100011033 and, as appropriate, by ERDF A way of making Europe by the “European Union” or by the “European Union NextGeneration EU/PRTR”; Comunidad de Madrid (EPU-INV/2020/001), and the University of Alcala (UAH-AE-2017-2). V.S. would like to thank the Ministerio de Ciencia e Innovacion (Spain) and the European Community (grant number: RYC2021-033921-I) for the financial support. C.R. would like to thank University of Alcala for a fellowship. J.F.V. acknowledges CSIC for funding under the grant PIE202250E035. The MACROMOLECULAR PHYSICS Service at the IEM-CSIC is acknowledged for granting the use of the rheology facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Piezoelectric Polymers and Polymer Composites

  • Fernandes, L.
  • Amorín, Harvey
  • Pascual-González, Cristina
  • Algueró, Miguel
  • Costa, C. M.
  • Lanceros-Méndez, Senentxu
Materials with the capacity to transform mechanical stresses into electrical energy and vice versa include piezoelectric polymers and polymer composites. The chapter introduces the piezoelectric effect and discusses polymer composites, emphasizing the polymer matrix and fillers to enhance performance and tune specific materials characteristics. We illustrate the versatility of these materials by analyzing the impact of filler type, size, and distribution on the composite’s piezoelectric response and its potential applications in biomedical devices, sensors, actuators, and energy harvesting. Lastly, we discuss present issues and needed advancements, such as the development of eco-friendly piezoelectric polymers and composites, which will further promote technological development and implementation., The authors thank the Fundação para a Ciência e Tecnologia (FCT) for financial support under the framework of Strategic Funding UID/ 04650: Physics Centre of Minho and Porto Universities (CF-UM-UP), UIDB/ 04650/2020, UID/FIS/04650/2020, and UID/EEA/04436/2020 and under projects, POCI- 01-0247-FEDER-046985, https://doi.org/10.54499/2022.03781.PTDC and https://doi.org/10.54499/2022.03931.PTDC funded by national funds through FCT and by the ERDF through the COMPETE2020—Programa Operacional Competitividade e Internacionalização (POCI). The authors also thank the FCT investigator contracts 2020.04028.CEECIND (https://doi.org/10.54499/2020.04028.CEECIND/CP1600/CT0018) (C.M.C.). This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by the Basque Government under the IKUR program. This work has been supported by PID2022-138572OB-C42 project funded by MCIN/AEI/https://doi.org/10.13039/501100011033/FEDER, UE and by by project BIOIMP_ACE_MAS_6_E, co-funded by the European Union through the Interreg VI-A Spain-Portugal Programme (POCTEP) 2021-2027. The authors also thank funding by projects PID2021-122708OB-C33 and TED2021-130871B-C21, funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and, as appropriate, by ERDF A way of making Europe by the “European Union” or by the “European Union NextGeneration EU/PRTR”. Dra. Pascual-González also acknowledges the support of Ramón y Cajal programme (grant RYC2021-034194-I)., Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Bio-based poly(ethylene brassylate) as a sustainable high-performance thermoplastic: Insights into its crystalline morphology, mechanical properties and rheology

  • Rentero Llorente, Christian|||0000-0001-6087-762X
  • Sotillo, Alberto
  • Souza Egipsy, Virginia
  • Vega, Juan F
  • Sessini , Valentina|||0000-0003-1205-4586
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
14 p., High-molecular-weight poly(ethylene brassylate) (PEB), a biobased and biodegradable polyester, was synthesized via ring-opening polymerization of ethylene brassylate using a highly active sodium phenoxide catalyst. Reaction conditions were optimized to achieve full monomer conversion and molecular weights up to 600 kDa. A comprehensive characterization has been performed that evidence the strong influence of the molecular weight in the thermal, mechanical, and rheological properties. Differential scanning calorimetry and WAXS confirmed a semicrystalline structure with multiple melting peaks and decreasing crystallinity as molecular weight increased. Mechanical testing revealed a transition from polyethylene-like behavior to a highly ductile, high-strain response in high-Mw samples, characterized by exceptional extensibility profile. Rheological analysis provided evidence of long-chain branching in polymers prepared without coinitiator, significantly affecting the viscoelastic response and extensional flow. These findings highlight PEB as a promising sustainable alternative to conventional polyolefins, combining favorable thermal stability, tunable mechanical properties, and processability for advanced applications such as packaging, 3D printing, and shape-memory materials., Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional, Unión Europea, CSIC, Consejo Superior de Investigaciones Científicas, Universidad de Alcalá, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Role of α and δ' phases in the piezoelectric response of in situ poled electrospun ferroelectric polyamide 11 fibers

  • Leonés Gil, Adrián Luis
  • Pascual González, Cristina
  • Amorín, Harvey
  • Fernández Blázquez, Juan P.
  • Algueró, Miguel
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Sessini , Valentina|||0000-0003-1205-4586
15 p., In situ poling of amine dipoles in ferroelectric polyamide 11 (PA11) fibers directly obtained from electrospinning is demonstrated. The combined effect of thermal treatments and mechanical stretching on the crystalline phases and the crystals orientation in the electrospun fibers has been studied. The electrospun PA11 fibers exhibited oriented alpha and & ouml;' phases with Hermans orientation factor, fc, of 0.40 and 0.42, both contributing to the piezoelectric response under transverse mechanical stress (d31 of 0.17 pC/N). Enhanced piezoelectric response was obtained when the PA11 sample was stretched at 15 % of strain ratio, that corresponds to its yield point. Once PA11 transits from elastic to plastic regime, an increase in the degree of crystallinity is observed (Xc of 24.9 %), along with a transition from the triclinic phase (alpha) to the pseudo-hexagonal phase (& ouml;'). The piezoelectric response was significantly increased once the material exceeded its yield point, at which a large piezoelectric coefficient d33 of 0.37 pC/N had resulted. Thermal treatment at 100 degrees C of PA11 fibers also resulted in preferential crystallographic orientation alpha and of & ouml;' phase (fc of 0.47 and 0.44), which is favoured by both mechanical stretching and heat treatment. These findings reveal the strong correlation between the mechanical and thermal treatment, crystalline phases and piezoelectric performance of in situ poled electrospun PA11 fibers., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Unión Europea
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Influence of molecular weight on the printability and piezoelectric morphology of melt-based 3D printed poly-L-lactic acid

  • Pascual González, Cristina
  • Vergara, Guillermo
  • Fernández Blázquez, Juan P.
  • Leonés Gil, Adrián Luis
  • Sessini , Valentina|||0000-0003-1205-4586
  • Wicklein, Bernd
  • Algueró, Miguel
  • Amorín, Harvey
12 p., Fused deposition modeling (FDM) 3D printing has been demonstrated capable of directly producing tailored piezoelectric morphology in poly-L-lactide (PLLA). This is an additive manufacturing technique that has been shown strong potential for developing complex and highly customized smart structures for sensing and actuation, yet relationships between printing, microstructure, and piezoelectric response remain largely unexplored. This work shows that both the molecular weight of the polymer and the printing trajectory critically impact the resulting shear piezoelectric coefficient of 3D-printed laminates. This is accomplished by printing PLLA from two raw sources with well-differentiated molecular weight and using either linear or concentric infill patterns. Results indicate that printing following concentric patterns enhances crystallization and crystal orientation, associated with more favoured thermal history during printing that minimizes chain relaxation and crystal disorientation. Besides, the high molecular weight PLLA showed higher piezoelectric response, despite its slightly lower crystalline fraction. The role of molecular chain entanglements in limiting crystal disorientation is discussed, along with the effect of the size and periodicity of the crystalline lamellas, whose variations are more noticeable in the low molecular weight system., Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional, Unión Europea, Comunidad de Madrid, Ministerio de Ciencia, Innovación y Universidades
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Upcycling orange-based waste into functional CNCs for greener L-lactide ring-opening polymerization

  • Leonés Gil, Adrián Luis
  • Sánchez Solís, Cayetano
  • Medel García, Asier
  • García Aparicio, María P.
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Sessini , Valentina|||0000-0003-1205-4586
20 p., This study demonstrates the valorization of orange peel waste as a sustainable feedstock for the production of cellulose nanocrystals (CNCs). Compositional analysis revealed a cellulose content up to 10.0% in the raw material. After performing the alkaline/peroxide treatment, CNCs were isolated via acid hydrolysis. Different inorganic acids were compared, namely sulfuric, phosphoric, and hydrochloric acids at low molar concentrations. The resulting CNCs showed distinct morphological and physicochemical properties, with sulfuric acid treatment yielding the highest crystallinity index (TCI) of 0.86 under conditions of 3.0 mol/L, 80 ?C, and 225 min. Additionally, the presence of sulfate or phosphate groups significantly influenced the thermal degradation behavior and the inorganic residue content in the obtained CNCs. Finally, the CNCs were successfully tested as co-initiator for lactide ring-opening polymerization. The results show that the molecular weights of the resulting polylactide varied depending on the CNC dispersion. This work supports the use of orange peel waste as a bio-source for CNC production and their potential application as a co-initiator in the synthesis of polyesters., Universidad de Alcalá, Ministerio de Ciencia e Innovación, Unión Europea
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Key factors affecting the piezoelectric response of poly-L-lactic acid electrospun fibers

  • Rentero Llorente, Christian|||0000-0001-6087-762X
  • Amorín, Harvey
  • Jiménez, Ricardo
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Sessini , Valentina|||0000-0003-1205-4586
10 p., Piezoelectric materials are increasingly explored as self-powered platforms in regenerative medicine and tissue engineering. Poly-L-lactic acid (PLLA) is particularly promising for biomedical applications due to its biodegradability, especially when processed via electrospinning which allows simultaneous fiber alignment and chain orientation. However, the mechanisms that enable and enhance the piezoelectric properties of PLLA remain insufficiently understood. This study employs a design-of-experiment approach to systematically examine the effects of chiral purity, molecular weight, and crystallinity on the resulting piezoelectric response of PLLA. In this work, highly aligned electrospun microfibers were successfully fabricated, revealing a direct relationship between the piezoelectric response and the processing method due to dipole orientation along the polymer chains through electrospinning. The piezoelectric properties were strongly influenced by crystallinity and chain orientation. The most crystalline sample (52 %) is characterized by high chiral purity and lower Disomer content, showing the highest piezoelectric response, while samples with higher D-isomer content exhibited the lowest crystallinity and performance. Thermal treatment at 100 ?C enhanced the crystallization of the oriented metastable phase in the as-spun fibers, resulting in increased melting temperature. Samples initially exhibiting amorphous or metastable phases displayed a significant increase in crystallinity and piezoelectric response following thermal treatment, highlighting the potential of controlling crystallization for optimizing piezoelectric performance in biomedical applications., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Unión Europea, Fondo Europeo de Desarrollo Regional