Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

One-step decomposition pathway for solution-derived metal oxide layers driven by hydroxyl radical atmospheres

  • Rivas, Y. A.
  • Echaniz-Cintora, M.
  • Barreto, A.
  • Molina-Calzada, J. A.
  • Serrano, M. C.
  • Jimenez, R.
  • Bretos, I.
  • Calzada, M. L.
  • Vidal Moya, José Alejandro
[EN] Solution deposition of high-performance oxide films has attracted intense research interest driven by the need for sustainable synthesis strategies that simplify key processes such as ligand removal, oxidation of organic residues, and the formation of amorphous and crystalline oxide phases. These approaches aim not only to reduce the carbon footprint but also to lower the thermal budget required for oxide film formation, thereby enabling direct, large-area deposition on low-cost, temperature-sensitive substrates required for emerging applications in thin-film electronics. In this work, we elucidate the chemical mechanism underlying the crystallization of solution-processed metal oxide films under highly reactive hydroxyl ((OH)-O-center dot) radical atmospheres. These radicals promote a simple, rapid, one-step decomposition of solution-derived films, directly yielding crystalline oxide films with substantially reduced energy input compared with conventional solution-deposition processes. Because this mechanism is independent of solution chemistry and oxide formulation, the platform is broadly applicable to diverse solution chemistries, crystalline oxides, and substrates. As a representative demonstration, BiFeO3 perovskite films are fabricated on flexible polyimide substrates, producing biocompatible, multifunctional flexible films., This work was supported by the Spanish projects PID2022-136790OB-I00, PID2021, CNS2022-135743 and TED2021-130871BC21 funded by MCIN/AEI/10.13039/501100011033 and the European Union through the "NextGeneration EU"/PRTR initiative. The Severo Ochoa Centres of Excellence program is acknowledged through Grant CEX2024-001445-S. A. B acknowledges financial support of the CAM PhD grant from the Comunidad de Madrid (PIPF-2024ECO-33982). The authors acknowledge Teresa Blasco Ibanez for contributing to the interpretation and discussion of the Electron Paramagnetic Resonance (EPR) results of the samples obtained at the Instituto de Tecnologia Quimica (UPV-CSIC), Universitat Politecnica de Valencia - Consejo Superior de Investigaciones Cientificas. The Advanced Light Microscopy Service at the Centro Nacional de Biotecnologia (CNB-CSIC) is acknowledged for assistance with confocal microscopy studies. The Scanning Electron Microscopy Service at the Instituto de Micro y Nanotecnologia (IMN-CSIC) is acknowledged for support with SEM studies. The MiNa Laboratory at IMN acknowledges its funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794), and EU (FEDER, FSE)".
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insights into the Early Size Effects of Lead-Free Piezoelectric Ba0.85Ca0.15Zr0.1Ti0.9O3

  • Amorín, Harvey
  • Venet, Michel
  • García, José E.
  • Ochoa, Diego A.
  • Ramos, Pablo
  • López-Sánchez, Jesús
  • Rubio-Zuazo, J.
  • Castro, Alicia
  • Algueró, Miguel
[EN] Ba0.85Ca0.15Zr0.1Ti0.9O3 (BCZT) stands out among lead-free ferroelectric oxides under consideration to replace state-of-the-art high-sensitivity piezoelectric Pb(Zr,Ti)O3, for a range of energy conversion ceramic technologies. However, the best performances have been reported for very coarse-grained materials, and attempts to refine microstructure below 10 µm grain size consistently result in significant property degradation. Here a comprehensive study of the grain size effects on the properties of BCZT across the micron scale is reported, down to the verge of the submicron one. Results show a distinctive early evolution of properties for grain sizes between 1 and 5 µm. For the larger sizes in this range, an opposite effect is found for the piezoelectric charge coefficient and electric field-induced strain with respect to the very coarse-grained material, while very good overall performance is maintained. For the lower sizes, relaxor features appear, yet materials can still be poled indicating their ferroelectric nature. This strongly resembles size effects in the Pb(Mg1/3Nb2/3)O3-PbTiO3 system, driven by the slowing down of the relaxor to ferroelectric transition with size reduction, though kinetics seem to slow down across much larger grain sizes for BCZT. Concomitant changes in the polymorphic phase coexistence are described and discussed by synchrotron X-ray diffraction., Grants PID2021-122708OB-C33 and TED2021-130871B-C21 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ERDF A way of making Europe, by the “European Union” or by the “European Union NextGeneration EU/PRTR”. Research also supported by Ministerio de Ciencia e Innovación (MCINN) through project PIE 2021-60-E-030. The authors acknowledge the ESRF (The European Synchrotron), MCINN and Consejo Superior de Investigaciones Científicas (CSIC, Spain) for provision of synchrotron radiation facilities. M.V. thanks financial support by Sao Paulo Research Foundation FAPESP (Grants No. 2017/17872-1 and No. 2022/08030-5) and the Brazilian CNPq (Process No. 304144/2021-5). Technical support by Inmaculada Martínez (ICMM) is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Epitaxy-driven ferroelectric/non-ferroelectric polymorph selection in an all-fluorite system

  • Barriuso, Eduardo
  • Jiménez, Ricardo
  • Langenberg, Eric
  • Koutsogiannis, Panagiotis
  • Larrea, Ángel
  • Varela, Manuel
  • Magén, César
  • Algarabel, Pedro A.
  • Algueró, Miguel
  • Pardo, José A.
Films of ferroelectric hafnia have hitherto been deposited on electrodes with a non-fluorite crystal structure. As a result, they are polycrystalline, contain fractions of non-ferroelectric polymorphs or have poor crystal quality. Here, a strategy that circumvents all these limitations is shown. Seven nanometers-thick epitaxial Hf0.5Zr0.5O2 (HZO) films are deposited directly on yttria-stabilized zirconia (YSZ) single-crystals. The fluorite structure of the whole system enables coherent epitaxy, while the substrate orientation induces polymorph-selective growth, being the HZO films orthorhombic on YSZ(111) and monoclinic on YSZ(001). Besides, the YSZ substrate can play the role of a buried floating electrode under the appropriate measuring conditions (temperature and frequency) thanks to its thermally-activated oxygen conductivity. Indeed, out-of-plane ferroelectric switching is confirmed in the orthorhombic HZO samples at 185 °C and 0.01 Hz frequency. This original approach avoids the need to deposit conducting bottom layers, allowing high-quality orthorhombic hafnia to be obtained directly on the substrate and its ferroelectric nature to be studied. Moreover, it constitutes a case of ion-driven ferroelectric switching, and thus gives support to the recently proposed relationship between ionic conductivity, and ferroelectricity in fluorite systems., The authors acknowledge financial support by Spanish Agencia Estatal de Investigación through the following grants funded by MCIN/AEI/10.13039/501100011033: PID2019-107338RB-C64, PID2020-112914RB-I00, and PID2021-128281NA-I00. M.A. and R.J. also recognize funding through project TED2021-130871B-C21 / AEI/10.13039/501100011033/ Unión Europea Next Generation EU/PRTR. The authors acknowledge Javier Blasco from INMA-CSIC (Zaragoza, Spain) for the synthesis of the PLD target. Authors acknowledge the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopías Avanzadas (LMA)” at the University of Zaragoza., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Key factors affecting the piezoelectric response of poly-L-lactic acid electrospun fibers

  • Rentero, C.
  • Amorín, Harvey
  • Jiménez, Ricardo
  • Mosquera, M.E.G.
  • Sessini, V.
Piezoelectric materials are increasingly explored as self-powered platforms in regenerative medicine and tissue engineering. Poly-L-lactic acid (PLLA) is particularly promising for biomedical applications due to its biodegradability, especially when processed via electrospinning which allows simultaneous fiber alignment and chain orientation. However, the mechanisms that enable and enhance the piezoelectric properties of PLLA remain insufficiently understood. This study employs a design-of-experiment approach to systematically examine the effects of chiral purity, molecular weight, and crystallinity on the resulting piezoelectric response of PLLA. In this work, highly aligned electrospun microfibers were successfully fabricated, revealing a direct relationship between the piezoelectric response and the processing method due to dipole orientation along the polymer chains through electrospinning. The piezoelectric properties were strongly influenced by crystallinity and chain orientation. The most crystalline sample (52 %) is characterized by high chiral purity and lower D-isomer content, showing the highest piezoelectric response, while samples with higher D-isomer content exhibited the lowest crystallinity and performance. Thermal treatment at 100 °C enhanced the crystallization of the oriented metastable phase in the as-spun fibers, resulting in increased melting temperature. Samples initially exhibiting amorphous or metastable phases displayed a significant increase in crystallinity and piezoelectric response following thermal treatment, highlighting the potential of controlling crystallization for optimizing piezoelectric performance in biomedical applications. © 2025 Elsevier B.V., All rights reserved., This work was supported by Ministerio de Ciencia e Innovación (Spain) (PID2023-152475OB-100, PID2021-122708OB-C33, TED2021-130871B–C22 and TED2021-130871B–C21), funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ERDF A way of making Europe by the “European Union” or by the “European Union NextGeneration EU/PRTR”; Comunidad de Madrid (EPU-INV/2020/001), and the University of Alcalá (UAH-AE-2017-2). V.S. would like to thank the Ministerio de Ciencia e Innovación (Spain) and the European Community (grant number: RYC2021-033921-I) for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Piezoelectric Polymers and Polymer Composites

  • Fernandes, L.
  • Amorín, Harvey
  • Pascual-González, Cristina
  • Algueró, Miguel
  • Costa, C. M.
  • Lanceros-Méndez, Senentxu
Materials with the capacity to transform mechanical stresses into electrical energy and vice versa include piezoelectric polymers and polymer composites. The chapter introduces the piezoelectric effect and discusses polymer composites, emphasizing the polymer matrix and fillers to enhance performance and tune specific materials characteristics. We illustrate the versatility of these materials by analyzing the impact of filler type, size, and distribution on the composite’s piezoelectric response and its potential applications in biomedical devices, sensors, actuators, and energy harvesting. Lastly, we discuss present issues and needed advancements, such as the development of eco-friendly piezoelectric polymers and composites, which will further promote technological development and implementation., The authors thank the Fundação para a Ciência e Tecnologia (FCT) for financial support under the framework of Strategic Funding UID/ 04650: Physics Centre of Minho and Porto Universities (CF-UM-UP), UIDB/ 04650/2020, UID/FIS/04650/2020, and UID/EEA/04436/2020 and under projects, POCI- 01-0247-FEDER-046985, https://doi.org/10.54499/2022.03781.PTDC and https://doi.org/10.54499/2022.03931.PTDC funded by national funds through FCT and by the ERDF through the COMPETE2020—Programa Operacional Competitividade e Internacionalização (POCI). The authors also thank the FCT investigator contracts 2020.04028.CEECIND (https://doi.org/10.54499/2020.04028.CEECIND/CP1600/CT0018) (C.M.C.). This study forms part of the Advanced Materials program and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by the Basque Government under the IKUR program. This work has been supported by PID2022-138572OB-C42 project funded by MCIN/AEI/https://doi.org/10.13039/501100011033/FEDER, UE and by by project BIOIMP_ACE_MAS_6_E, co-funded by the European Union through the Interreg VI-A Spain-Portugal Programme (POCTEP) 2021-2027. The authors also thank funding by projects PID2021-122708OB-C33 and TED2021-130871B-C21, funded by MCIN/AEI/https://doi.org/10.13039/501100011033 and, as appropriate, by ERDF A way of making Europe by the “European Union” or by the “European Union NextGeneration EU/PRTR”. Dra. Pascual-González also acknowledges the support of Ramón y Cajal programme (grant RYC2021-034194-I)., Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Role of α and δ' phases in the piezoelectric response of in situ poled electrospun ferroelectric polyamide 11 fibers

  • Leonés Gil, Adrián Luis
  • Pascual González, Cristina
  • Amorín, Harvey
  • Fernández Blázquez, Juan P.
  • Algueró, Miguel
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Sessini , Valentina|||0000-0003-1205-4586
15 p., In situ poling of amine dipoles in ferroelectric polyamide 11 (PA11) fibers directly obtained from electrospinning is demonstrated. The combined effect of thermal treatments and mechanical stretching on the crystalline phases and the crystals orientation in the electrospun fibers has been studied. The electrospun PA11 fibers exhibited oriented alpha and & ouml;' phases with Hermans orientation factor, fc, of 0.40 and 0.42, both contributing to the piezoelectric response under transverse mechanical stress (d31 of 0.17 pC/N). Enhanced piezoelectric response was obtained when the PA11 sample was stretched at 15 % of strain ratio, that corresponds to its yield point. Once PA11 transits from elastic to plastic regime, an increase in the degree of crystallinity is observed (Xc of 24.9 %), along with a transition from the triclinic phase (alpha) to the pseudo-hexagonal phase (& ouml;'). The piezoelectric response was significantly increased once the material exceeded its yield point, at which a large piezoelectric coefficient d33 of 0.37 pC/N had resulted. Thermal treatment at 100 degrees C of PA11 fibers also resulted in preferential crystallographic orientation alpha and of & ouml;' phase (fc of 0.47 and 0.44), which is favoured by both mechanical stretching and heat treatment. These findings reveal the strong correlation between the mechanical and thermal treatment, crystalline phases and piezoelectric performance of in situ poled electrospun PA11 fibers., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Unión Europea
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Key factors affecting the piezoelectric response of poly-L-lactic acid electrospun fibers

  • Rentero Llorente, Christian|||0000-0001-6087-762X
  • Amorín, Harvey
  • Jiménez, Ricardo
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Sessini , Valentina|||0000-0003-1205-4586
10 p., Piezoelectric materials are increasingly explored as self-powered platforms in regenerative medicine and tissue engineering. Poly-L-lactic acid (PLLA) is particularly promising for biomedical applications due to its biodegradability, especially when processed via electrospinning which allows simultaneous fiber alignment and chain orientation. However, the mechanisms that enable and enhance the piezoelectric properties of PLLA remain insufficiently understood. This study employs a design-of-experiment approach to systematically examine the effects of chiral purity, molecular weight, and crystallinity on the resulting piezoelectric response of PLLA. In this work, highly aligned electrospun microfibers were successfully fabricated, revealing a direct relationship between the piezoelectric response and the processing method due to dipole orientation along the polymer chains through electrospinning. The piezoelectric properties were strongly influenced by crystallinity and chain orientation. The most crystalline sample (52 %) is characterized by high chiral purity and lower Disomer content, showing the highest piezoelectric response, while samples with higher D-isomer content exhibited the lowest crystallinity and performance. Thermal treatment at 100 ?C enhanced the crystallization of the oriented metastable phase in the as-spun fibers, resulting in increased melting temperature. Samples initially exhibiting amorphous or metastable phases displayed a significant increase in crystallinity and piezoelectric response following thermal treatment, highlighting the potential of controlling crystallization for optimizing piezoelectric performance in biomedical applications., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Unión Europea, Fondo Europeo de Desarrollo Regional