Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insight into the melt-processed polylimonene oxide/polylactic acid blends

  • Palenzuela, Miguel
  • Vega, Juan Francisco
  • Souza-Egipsy, Virginia
  • Ramos, Javier
  • Rentero, Christian
  • Sessini, Valentina
  • Mosquera, Marta E.G.
8 pags., 7 figs. 2 tabs., In this work, the polymerization of limonene oxide (LO) has been optimized at room temperature with two different aluminium-based catalysts [AlMeX{2,6-(CHPh2)2-4-tBu-C6H2O}] (X = Me (1), Cl (2)). A fully bio-based ether, polylimonene oxide (PLO), has been synthesized with low molecular weight and good thermal stability, being a potential sustainable polymeric additive for other bio-based and biodegradable polymers such as polylactic acid (PLA). Hence, we have explored its ability to influence the thermal, mechanical and morphological properties of PLA by preparing their blends by melt processing. The addition of a low amount of PLO led to a nearly 10 °C decrease in the PLA glass transition temperature. Moreover, a decrease in the PLA melting temperature and the degree of crystallinity was observed. Interestingly, a remarkable increase in the flexibility of PLA-based films was noticed. All the results point to the existence of strong interactions between the components, suggesting their partial miscibility., The authors would like to thank the Comunidad de Madrid (EPU-INV/2020/001) and the Ministerio de Ciencia e Innovación (Spain) through the projects TED2021-130871B-C22, PID2021-122708OB-C31, PID2019-107710 GB-I00, and RYC2021-033921-I for their financial support. BIOPHYM Service at the IEM-CSIC and POLYMAT (Rheology Lab) are acknowledged for granting the use of their facilities. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754382, GOT ENERGY TALENT., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

N-Heterocyclic Carbene-Carbodiimide (NHC-CDI) Betaines as Organocatalysts for β-Butyrolactone Polymerization: Synthesis of Green PHB Plasticizers with Tailored Molecular Weights

  • Sánchez-Roa, David
  • Sessini, Valentina
  • Mosquera, Marta E.G.
  • Cámpora, Juan
The manufacture of poly(3-hydroxybutyrate) (PHB) stands out as a promising alternative to traditional plastics. This polymer is usually produced by bacteria-based biotechnology or metal-catalyzed ring-opening polymerization (ROP) of β-butyrolactone (β-BL). Nevertheless, commercial PHB suffers from different issues, from poor processability to high production costs. Herein, we report the chemical synthesis of PHB from the ROP of rac-β-butyrolactone promoted by a zwitterionic organocatalyst, an N-heterocyclic carbene-carbodiimide (NHC-CDI) betaine adduct. This reaction has been investigated by a combination of experimental and computational methods. The catalyst cleaves the β-BL via nucleophilic displacement of the C-O(carboxyl) bond followed by intramolecular elimination to give protonated betaine-crotonate ion pairs, the active polymerization initiators. Polymer growth is propagated and controlled by these betaine ion pairs, which render amorphous low-molecular-weight PHBs by an unusual mechanism with rapid chain transfer to the monomer regime, analogous to the well-known mechanism of ethylene oligomerization with late transition-metal catalysts. The resulting material is suitable as a biodegradable and biocompatible plasticizer for commercial bacterial or synthetic PHB. Perfect compatibility between the matrix and the additive and a significant reduction of the crystallinity resulted in a more flexible and resilient material., This work was supported by the Ministerio de Ciencia e Innovación (Spain) (TED2021-130871B-C22, PGC2018-095768-B-100 and Thematic Network “OASIS” RED2022-134074-T), Comunidad de Madrid (EPU-INV/2020/001), Junta de Andalucía (PY20_0104), and the University of Alcalá (UAH-AE-2017-2). V.S. would like to thank the Ministerio de Ciencia e Innovación (Spain) and the European Community (Grant Number: RYC2021-033921-I) for the financial support. D.S.-R. thanks the Spanish Government for a Predoctoral Fellowship. The authors gratefully acknowledge Dra. Lucía Álvarez Miguel (UAH) for her assistance in the X-ray data collection and Dr. Javier López-Prados and Dra. Gloria Gutiérrez-Alcalá (Mass Spectrometry services, CIC-Cartuja and IIQ) for sample preparation and recording Maldi-TOF and ESI mass spectra of polymers., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Key factors affecting the piezoelectric response of poly-L-lactic acid electrospun fibers

  • Rentero, C.
  • Amorín, Harvey
  • Jiménez, Ricardo
  • Mosquera, M.E.G.
  • Sessini, V.
Piezoelectric materials are increasingly explored as self-powered platforms in regenerative medicine and tissue engineering. Poly-L-lactic acid (PLLA) is particularly promising for biomedical applications due to its biodegradability, especially when processed via electrospinning which allows simultaneous fiber alignment and chain orientation. However, the mechanisms that enable and enhance the piezoelectric properties of PLLA remain insufficiently understood. This study employs a design-of-experiment approach to systematically examine the effects of chiral purity, molecular weight, and crystallinity on the resulting piezoelectric response of PLLA. In this work, highly aligned electrospun microfibers were successfully fabricated, revealing a direct relationship between the piezoelectric response and the processing method due to dipole orientation along the polymer chains through electrospinning. The piezoelectric properties were strongly influenced by crystallinity and chain orientation. The most crystalline sample (52 %) is characterized by high chiral purity and lower D-isomer content, showing the highest piezoelectric response, while samples with higher D-isomer content exhibited the lowest crystallinity and performance. Thermal treatment at 100 °C enhanced the crystallization of the oriented metastable phase in the as-spun fibers, resulting in increased melting temperature. Samples initially exhibiting amorphous or metastable phases displayed a significant increase in crystallinity and piezoelectric response following thermal treatment, highlighting the potential of controlling crystallization for optimizing piezoelectric performance in biomedical applications. © 2025 Elsevier B.V., All rights reserved., This work was supported by Ministerio de Ciencia e Innovación (Spain) (PID2023-152475OB-100, PID2021-122708OB-C33, TED2021-130871B–C22 and TED2021-130871B–C21), funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ERDF A way of making Europe by the “European Union” or by the “European Union NextGeneration EU/PRTR”; Comunidad de Madrid (EPU-INV/2020/001), and the University of Alcalá (UAH-AE-2017-2). V.S. would like to thank the Ministerio de Ciencia e Innovación (Spain) and the European Community (grant number: RYC2021-033921-I) for the financial support., Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Titanium-catalyzed synthesis of polymyrcene and polyanethol and application as sustainable additives for poly(lactic acid)

  • Vinueza Vaca, Joan Martín|||0000-0002-0885-6394
  • Franco-Mateo, Emma
  • Sessini, Valentina|||0000-0003-1205-4586
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Souza Egipsy, Virginia
  • Ramos, Javier
  • Vega, Juan F
  • Jiménez Pindado, Gerardo Javier|||0000-0002-7057-4750
  • Tabernero Magro, María Vanessa|||0000-0003-1054-1663
The replacement of fossil-derived plastics with those obtained from bio-based resources, which present suitable performance to be employed as commodity plastics is currently an important field of research, given the urgent need to transition from a fossil-based to a more sustainable economy. In this context, this work is focused on the application of a catalytic system based on silsesquioxane-cyclopentadienyl titanium complexes for the preparation of bio-based polymers, which can be used as additives to improve the poor material properties of a biodegradable polymer such as poly(lactic acid) (PLA). These titanium complexes, when activated with methylaluminoxane or with triflate salts, are shown to be capable of the polymerization of two bio-based monomers: myrcene and anethole. It is notable that polymerizations with these two distinct monomers take place through different mechanisms. The resulting polymyrcene (PMy) and polyanethol (PAN) have been applied as modifiers for PLA. Binary blends of PMy and PLA exhibited a considerable decrease in Tg and the promotion of PLA crystallization for a PMy content below 15 wt%. The mechanical properties of the PLA/PMy blends also displayed plasticization, with a decrease in the elastic modulus and enhanced plasticity, which resulted in less fragile systems compared to pure PLA. Morphological analysis has indicated a partially miscible, phase-separated system with micron-sized domains. In contrast, PAN completely inhibited PLA crystallization and the PLA/PAN blends were immiscible, but well-dispersed, a phase-separated system was obtained in solvent-casting film preparation with very small PAN domains. The blends showed higher tensile modulus than pure PLA and an absence of plastic behaviour, resulting in more fragile systems upon the addition of PAN to PLA., Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Role of α and δ' phases in the piezoelectric response of in situ poled electrospun ferroelectric polyamide 11 fibers

  • Leonés Gil, Adrián Luis
  • Pascual González, Cristina
  • Amorín, Harvey
  • Fernández Blázquez, Juan P.
  • Algueró, Miguel
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Sessini , Valentina|||0000-0003-1205-4586
15 p., In situ poling of amine dipoles in ferroelectric polyamide 11 (PA11) fibers directly obtained from electrospinning is demonstrated. The combined effect of thermal treatments and mechanical stretching on the crystalline phases and the crystals orientation in the electrospun fibers has been studied. The electrospun PA11 fibers exhibited oriented alpha and & ouml;' phases with Hermans orientation factor, fc, of 0.40 and 0.42, both contributing to the piezoelectric response under transverse mechanical stress (d31 of 0.17 pC/N). Enhanced piezoelectric response was obtained when the PA11 sample was stretched at 15 % of strain ratio, that corresponds to its yield point. Once PA11 transits from elastic to plastic regime, an increase in the degree of crystallinity is observed (Xc of 24.9 %), along with a transition from the triclinic phase (alpha) to the pseudo-hexagonal phase (& ouml;'). The piezoelectric response was significantly increased once the material exceeded its yield point, at which a large piezoelectric coefficient d33 of 0.37 pC/N had resulted. Thermal treatment at 100 degrees C of PA11 fibers also resulted in preferential crystallographic orientation alpha and of & ouml;' phase (fc of 0.47 and 0.44), which is favoured by both mechanical stretching and heat treatment. These findings reveal the strong correlation between the mechanical and thermal treatment, crystalline phases and piezoelectric performance of in situ poled electrospun PA11 fibers., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Unión Europea
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Upcycling orange-based waste into functional CNCs for greener L-lactide ring-opening polymerization

  • Leonés Gil, Adrián Luis
  • Sánchez Solís, Cayetano
  • Medel García, Asier
  • García Aparicio, María P.
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Sessini , Valentina|||0000-0003-1205-4586
20 p., This study demonstrates the valorization of orange peel waste as a sustainable feedstock for the production of cellulose nanocrystals (CNCs). Compositional analysis revealed a cellulose content up to 10.0% in the raw material. After performing the alkaline/peroxide treatment, CNCs were isolated via acid hydrolysis. Different inorganic acids were compared, namely sulfuric, phosphoric, and hydrochloric acids at low molar concentrations. The resulting CNCs showed distinct morphological and physicochemical properties, with sulfuric acid treatment yielding the highest crystallinity index (TCI) of 0.86 under conditions of 3.0 mol/L, 80 ?C, and 225 min. Additionally, the presence of sulfate or phosphate groups significantly influenced the thermal degradation behavior and the inorganic residue content in the obtained CNCs. Finally, the CNCs were successfully tested as co-initiator for lactide ring-opening polymerization. The results show that the molecular weights of the resulting polylactide varied depending on the CNC dispersion. This work supports the use of orange peel waste as a bio-source for CNC production and their potential application as a co-initiator in the synthesis of polyesters., Universidad de Alcalá, Ministerio de Ciencia e Innovación, Unión Europea
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Cyclopentadienyl-Silsesquioxane titanium complexes in the polymerizations of styrene and L-Lactide

  • Vinueza Vaca, Joan Martín|||0000-0002-0885-6394
  • Anwar, Shoaib
  • Impemba, Salvatore
  • Grimaldi, Ilaria
  • Jiménez Pindado, Gerardo Javier|||0000-0002-7057-4750
  • Capacchione, Carmine
  • Tabernero Magro, María Vanessa|||0000-0003-1054-1663
  • Milione, Stefano
15 p., In this contribution, two silsesquioxane-cyclopentadienyl titanium complexes featuring one or two chloride ancillary ligands, [Ti(η5-C5H4SiMeO2Ph7Si7O10-κO)Cl2] (1) and [Ti(η5-C5H4SiMe2OPh7Si7O11-κ2O2)Cl] (2), were synthesized and evaluated in the Ziegler-Natta polymerization of styrene and the ring-opening polymerization (ROP) of L-lactide, respectively. Complex 1, activated with methylaluminoxane (MAO), catalyzed the syndiotactic polymerization of styrene with turnover frequencies up to 28 h-1, affording polymers with narrow dispersity, low number-average molecular weights (Mn = 5.2-8.2 kDa), and high stereoregularity, as confirmed by 13C NMR. Complex 2, in combination with benzyl alcohol, promoted the ring-opening polymerization of L-lactide in solution at 100 °C, achieving conversions up to 95% with good molecular weight control (Mn close to theoretical, Đ = 1.19-1.32). Under melt conditions at 175 °C, it converted up to 3000 equiv. of monomer within 1 h. Kinetic analysis revealed first-order dependence on monomer concentration. The results highlight the ability of these complexes to produce syndiotactic polystyrene with narrow molecular weight distributions and to catalyze controlled ROP of L-lactide under both solution and melt conditions. Computational studies provided insight into key structural and energetic features influencing reactivity, offering a framework for further catalyst optimization. This work broadens the application scope of silsesquioxane-cyclopentadienyl titanium complexes and supports their potential as sustainable and versatile catalysts for both commodity and biodegradable polymer synthesis., Universidad de Alcalá, Ministerio de Ciencia e Innovación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Non-isocyanate polyurethanes (NIPUs) incorporating isomers of abundant sugar-derived 1,4:3,6-dianhydrohexitols

  • Díez Poza, Carlos|||0000-0002-9613-0680
  • Sessini, Valentina|||0000-0003-1205-4586
  • Jaraba Cabrera, Diego
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Whiteoak , Christopher John
12 p., Non-isocyanate polyurethanes (NIPUs) are attracting significant attention as alternatives to traditional polyurethanes (PUs). This interest stems from the replacement of toxic diisocyanates which are combined with diols in their synthesis. These toxic compounds are replaced with bis-cyclic carbonates, which are reacted with diamines, whereby these cyclic carbonates can be obtained from the atom-efficient cycloaddition of epoxides with carbon dioxide (CO2). Still further, at present the preparation of bis-cyclic carbonates incorporating bioderived compounds into their structure is beginning to bring a further increased sustainability profile to these monomers. This work describes the preparation of bis-cyclic carbonates derived from 1,4:3,6-dianhydrohexitols (isosorbide, isomannide, and isoidide) and their application as monomers in the synthesis of NIPUs. The effect of the stereochemistry of the bis-cyclic carbonate monomer and the variation of the structure of the diamine on the properties of the final polymers are presented and discussed. Finally, given the presence of stereochemistry in the bis-cyclic carbonate monomers, examples of the optical properties of the NIPUs obtained are provided., Agencia Estatal de Investigación, Ministerio de Ciencia, Innovación y Universidades, Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Unión Europea
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

N-heterocyclic carbene-carbodiimide (NHC-CDI) betaines as organocatalysts for beta-butyrolactone polymerization: synthesis of green PHB plasticizers with tailored molecular weights

  • Sánchez Roa, David|||0000-0001-8172-5764
  • Sessini , Valentina|||0000-0003-1205-4586
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Campora Pérez, Juan
15 p., The manufacture of poly(3-hydroxybutyrate) (PHB) stands out as a promising alternative to traditional plastics. This polymer is usually produced by bacteria-based biotechnology or metal-catalyzed ring-opening polymerization (ROP) of beta-butyrolactone (beta-BL). Nevertheless, commercial PHB suffers from different issues, from poor processability to high production costs. Herein, we report the chemical synthesis of PHB from the ROP of rac-beta-butyrolactone promoted by a zwitterionic organocatalyst, an N-heterocyclic carbene-carbodiimide (NHC-CDI) betaine adduct. This reaction has been investigated by a combination of experimental and computational methods. The catalyst cleaves the beta-BL via nucleophilic displacement of the C-O(carboxyl) bond followed by intramolecular elimination to give protonated betaine-crotonate ion pairs, the active polymerization initiators. Polymer growth is propagated and controlled by these betaine ion pairs, which render amorphous low-molecular-weight PHBs by an unusual mechanism with rapid chain transfer to the monomer regime, analogous to the well-known mechanism of ethylene oligomerization with late transition-metal catalysts. The resulting material is suitable as a biodegradable and biocompatible plasticizer for commercial bacterial or synthetic PHB. Perfect compatibility between the matrix and the additive and a significant reduction of the crystallinity resulted in a more flexible and resilient material., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Unión Europea, Universidad de Alcalá, Junta de Andalucia
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Key factors affecting the piezoelectric response of poly-L-lactic acid electrospun fibers

  • Rentero Llorente, Christian|||0000-0001-6087-762X
  • Amorín, Harvey
  • Jiménez, Ricardo
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Sessini , Valentina|||0000-0003-1205-4586
10 p., Piezoelectric materials are increasingly explored as self-powered platforms in regenerative medicine and tissue engineering. Poly-L-lactic acid (PLLA) is particularly promising for biomedical applications due to its biodegradability, especially when processed via electrospinning which allows simultaneous fiber alignment and chain orientation. However, the mechanisms that enable and enhance the piezoelectric properties of PLLA remain insufficiently understood. This study employs a design-of-experiment approach to systematically examine the effects of chiral purity, molecular weight, and crystallinity on the resulting piezoelectric response of PLLA. In this work, highly aligned electrospun microfibers were successfully fabricated, revealing a direct relationship between the piezoelectric response and the processing method due to dipole orientation along the polymer chains through electrospinning. The piezoelectric properties were strongly influenced by crystallinity and chain orientation. The most crystalline sample (52 %) is characterized by high chiral purity and lower Disomer content, showing the highest piezoelectric response, while samples with higher D-isomer content exhibited the lowest crystallinity and performance. Thermal treatment at 100 ?C enhanced the crystallization of the oriented metastable phase in the as-spun fibers, resulting in increased melting temperature. Samples initially exhibiting amorphous or metastable phases displayed a significant increase in crystallinity and piezoelectric response following thermal treatment, highlighting the potential of controlling crystallization for optimizing piezoelectric performance in biomedical applications., Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Unión Europea, Fondo Europeo de Desarrollo Regional
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

PRIORITY project in action: advances and future directions on remediation, recovery, and development of sustainable alternatives to plastic materials to combat microplastic pollution

  • Espinoza González, Carlos
  • Ali, Wajid
  • Cavusoglu, Halit
  • Kokotos, Christoforos G.
  • Libralato, Giovanni
  • Milanesio, Marco
  • Safak Seker, Urartu Ozgur
  • Rodríguez Alegre, Rubén
  • Sessini , Valentina|||0000-0003-1205-4586
  • Tubic, Aleksandra
  • Federici, Stefania
  • Raquez, Jean-Marie
  • Cocca, Mariacristina
20 p., Micro- and nanoplastics (MPs and NPs) remain a fragmented challenge across prevention, removal, and circular recovery strategies. At the second meeting of the COST Action PRIORITY ? Plastics monitoRIng detectiOn RemedIaTion recoverY Working Group 5 (WG5, focused on Remediation, Recovery, and Sustainable Alternatives), bringing together over 550 researchers from 53 countries, participants consolidated advances and defined shared priorities. Reported progress spans: (i) removal ? membrane trains, bubble barriers, and graphene-based aerogels enabling water flow with selective adsorption of sub-100 µm polymer particles; (ii) bioroutes ? plastisphere-derived microbial consortia and an engineered whole-cell catalyst co-displaying polyethylene terephthalate (PET)degrading enzymes PETase and MHETase for PET depolymerization to terephthalic acid (TPA) and ethylene glycol (EG); (iii) recovery and upcycling ? image-guided quality control to reduce expandable polystyrene (EPS) production waste and a mild, aerobic photochemical protocol converting polystyrene to benzoic acid; and (iv) sustainable alternatives ? closed-loop poly(lactic acid) (PLA) systems based on room-temperature ring-opening polymerization and catalytic alcoholysis to alkyl lactates, and bio-derived encapsulants (polysaccharides and candelilla-wax nanoparticles) for slow-release agro-inputs that avoid plastic residues. Cross-cutting needs include reference materials, performance metrics (capture thresholds, yields, life-cycle assessment), and alignment with standardization and regulatory pathways. The meeting advocates prevention at the source as the primary strategy, complemented by controllable recovery and evidence-based remediation. The roadmap outlined connects laboratory validation to field deployment and policy uptake, enabling robust, harmonized, and scalable solutions against plastic pollution., European Cooperation in Science and Technology, Scientific and Technological Research Council of Türkiye, Centro para el Desarrollo Tecnológico y la Innovación, Agencia Estatal de Investigación, Universidad de Alcalá, Consejo Nacional de Humanidades, Ciencias y Tecnologías (México), Centro de Investigación en Química Aplicada, Fondo Europeo de Desarrollo Regional, Université de Lille, Institut français de recherche pour l’exploitation de la mer
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Combining bio- and chemo-catalysis for cyclic carbonate synthesis at very low pressure: efficient 'online" utilization of CO2 obtained directly from the fermentation of sugars

  • Jaraba Cabrera, Diego
  • Álvarez Miguel, Lucia|||0000-0002-6748-1158
  • Díez Poza, Carlos|||0000-0002-9613-0680
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Whiteoak , Christopher John
7 p., A very low-pressure set-up for the synthesis of cyclic carbonates and polycarbonates from epoxides/CO2 has been constructed using our previously reported Ga-catalyst. This set-up is based on the direct use of unpurified CO2 obtained from the fermentation of sugars, which exemplifies a potentially important advancement for the future application of this widely explored CO2 utilization reaction. Using this approach, it has been possible to produce cyclic carbonates with a high bio-derived atom content when starting from bio-based epoxides, such as, eugenol oxide. Use of alternative sources of sugar beyond sucrose have also been exemplified (grapes), highlighting the potential for direct coupling to important industrial fermentation processes which emit large amounts of CO2. Finally, use of 13C6-glucose as sugar-source has allowed for the preparation of 13C-containing cyclic carbonates, with the bis-cyclic carbonates being readily converted through reaction with a diamine to form 13C-labelled polymers (13C-Non-Isocyanate PolyUrethanes; 13C-NIPU?s)., Agencia Estatal de Investigación, Ministerio de Ciencia e Innovación, Comunidad de Madrid, Universidad de Alcalá, Unión Europea