Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 45
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic Processes for Biomass-Derived Platform Molecules Valorisation

  • Ventura, Maria
  • Marinas, Alberto
  • Domine, Marcelo Eduardo
[EN] Nowadays, biomass is an interesting raw material for chemical industry, and the valorisation of its derivatives becomes in a sustainable alternative against to the depletion of fossil sources necessary for the production of energy, fuels and chemicals. Different organic compounds, such as sugars, polyols, furanics, as well as several acids (i.e. levulinic acid, succinic acid, itaconic acid, 3-hydroxy-propionic acid, among others) can be obtained after a primary treatment of the lignocellulosic-type biomass. These bio-derived molecules can be used as "platform chemicals" for the synthesis of numerous chemical products (i.e. components and additives for fuels, solvents and paintings, new monomers for polymer industry, etc.). In this review, the possibilities of valorisation via novel catalytic processes of some of the most promising biomass(cellulose/hemicellulose)-derived intermediates and platform chemicals for obtaining both conventional and new high added-value chemicals for industry will be assessed, also including cascade-type (or "one-pot") catalytic processes recently developed., MED acknowledges financial support by the Spanish Government (PGC2018-097277-B-I00 and SEV-2016-0683) and Generalitat Valenciana (GVA, PROMETEO/2018/006). AMA is thankful to MINECO financial support (ENE2016-81013-R (AEI/FEDER, UE) and Andalusian Government (UCO-FEDER Project CATOLIVAL, re. 1264113-R, 2018 call). MV thanks the EU H2020 for the Marie Skodowska-Curie (GA 754382), GOT ENERGY TALENT. The content of this article does not reflect the official opinion of the European Union. Responsibility for the information and views expressed herein lies entirely with the author(s).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hf/porphyrin-based metal-organic framework PCN-224 for CO2 cycloaddition with epoxides

  • Carrasco, Sergio
  • Orcajo, Gisela
  • Martínez, Fernando
  • Imaz, Inhar
  • Kavak, Safiyye
  • Arenas Esteban, Daniel
  • Maspoch, Daniel
  • Bals, Sara
  • Calleja, Guillermo
  • Horcajada, Patricia
Herein, we describe for the first time the synthesis of the highly porous Hf-tetracarboxylate porphyrin-based metal-organic framework (MOF) (Hf)PCN-224(M) (M = H2, Co2+). (Hf)PCN-224(H2) was easily and efficiently prepared following a simple microwave-assisted procedure with good yields (56–67%; space-time yields: 1100–1270 kg m−3·day−1), high crystallinity and phase purity by using trifluoromethanesulfonic acid and benzoic acid as modulators in less than 30 min. By simply introducing a preliminary step (10 min), 5,10,15,20-(tetra-4-carboxyphenyl)porphyrin linker (TCPP) was quantitatively metalated with Co2+ without additional purification and/or time consuming protection/deprotection steps to further obtain (Hf)PCN-224(Co). (Hf)PCN-224(Co) was then tested as catalyst in CO2 cycloaddition reaction with different epoxides to yield cyclic carbonates, showing the best catalytic performance described to date compared to other PCNs, under mild conditions (1 bar CO2, room temperature, 18–24 h). Twelve epoxides were tested, obtaining from moderate to excellent conversions (35–96%). Moreover, this reaction was gram scaled-up (x50) without significant loss of yield to cyclic carbonates. (Hf)PCN-224(Co) maintained its integrity and crystallinity even after 8 consecutive runs, and poisoning was efficiently reverted by a simple thermal treatment (175 °C, 6 h), fully recovering the initial catalytic activity., H2020-MSCA-COFUND GOT Energy Talent (ref. 754382), “Comunidad de Madrid” and European Regional Development Fund-FEDER 2014-2020-OE REACT-UE 1 for their financial support to VIRMOF-CM project associated to R&D projects in response to COVID-19, H2020-MSCA-ITN-2019 HeatNMof (ref. 860942), M-ERA-NET C-MOF-cell (grant PCI2020-111998 funded by MCIN/AEI /10.13039/501100011033 and European Union NextGenerationEU/PRTR), Retos Investigación MOFSEIDON (grant PID2019-104228RB-I00 funded by MCIN/AEI/10.13039/501100011033)., This work has been also supported by the Regional Government of Madrid (Project ACES2030-CM, S2018/EMT-4319) and the Universidad Rey Juan Carlos IMPULSO Project (grant MATER M − 3000)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Insight into the melt-processed polylimonene oxide/polylactic acid blends

  • Palenzuela, Miguel
  • Vega, Juan Francisco
  • Souza-Egipsy, Virginia
  • Ramos, Javier
  • Rentero, Christian
  • Sessini, Valentina
  • Mosquera, Marta E.G.
8 pags., 7 figs. 2 tabs., In this work, the polymerization of limonene oxide (LO) has been optimized at room temperature with two different aluminium-based catalysts [AlMeX{2,6-(CHPh2)2-4-tBu-C6H2O}] (X = Me (1), Cl (2)). A fully bio-based ether, polylimonene oxide (PLO), has been synthesized with low molecular weight and good thermal stability, being a potential sustainable polymeric additive for other bio-based and biodegradable polymers such as polylactic acid (PLA). Hence, we have explored its ability to influence the thermal, mechanical and morphological properties of PLA by preparing their blends by melt processing. The addition of a low amount of PLO led to a nearly 10 °C decrease in the PLA glass transition temperature. Moreover, a decrease in the PLA melting temperature and the degree of crystallinity was observed. Interestingly, a remarkable increase in the flexibility of PLA-based films was noticed. All the results point to the existence of strong interactions between the components, suggesting their partial miscibility., The authors would like to thank the Comunidad de Madrid (EPU-INV/2020/001) and the Ministerio de Ciencia e Innovación (Spain) through the projects TED2021-130871B-C22, PID2021-122708OB-C31, PID2019-107710 GB-I00, and RYC2021-033921-I for their financial support. BIOPHYM Service at the IEM-CSIC and POLYMAT (Rheology Lab) are acknowledged for granting the use of their facilities. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754382, GOT ENERGY TALENT., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bimetallic metal-organic frameworks for efficient visible-light-driven photocatalytic CO2 reduction and H2 generation

  • Ezugwu, C.I.
  • Ghosh, S.
  • Bera, S.
  • Faraldos, Marisol
  • Mosquera, M.E.G.
  • Rosal, R.
A series of robust octahedral bimetallic metal-organic frameworks, NH2-UiO-66(Zr/M), denoted as Zr/M-ATA, (where M is Fe, Co, or Cu) were prepared by solvothermal de novo reaction of 2-aminoterephthalic acid (denoted as H2ATA) and mixed metal salts using benzoic acid as a modulator. Photocatalytic studies revealed that Zr/Fe-ATA, Zr/Cu-ATA and Zr/Co-ATA containing double metals outperformed that of the monometallic Zr-ATA. Zr/Cu-ATA displayed excellent performance for visible-light-driven CO2 reduction with a formate formation rate of 122 μmol h−1 mmolMOF-1, which is among the highest performance of NH2-UiO-66 based MOFs. Furthermore, Zr/Cu-ATA is an efficient catalyst that can generate 12.8 mmol of H2 in 2 h under visible light irradiation. The light absorption band of Zr/Cu-ATA shifted to the near-IR region and the presence of Cu-oxo clusters significantly narrowed the bandgap from 2.95 eV (Zr-ATA) to 1.93 eV (Zr/Cu-ATA). Other photoelectrochemical studies further confirmed that the high catalytic performance of Zr/Cu-ATA can be ascribed to optimized bandgap, facile charge transfer and availability of large number of active sites. © 2022 Elsevier B.V., C.I.E. acknowledge the financial support of the European Union Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 754382., Supplementary data to this article can be found online at https://doi.org/10.1016/j.seppur.2022.122868., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zirconium-based Metal-Organic Frameworks for highly efficient solar light-driven photoelectrocatalytic disinfection

  • Valenzuela, Laura
  • Amariei, G.
  • Ezugwu, C.I.
  • Faraldos, Marisol
  • Bahamonde, A.
  • Mosquera, M.E.G.
  • Rosal, Roberto
Two synthesized zirconium-based Metal-Organic Frameworks (Zr-MOFs), using 2,6-naphthalenedicarboxylic acid (NDC) and amino-functionalized NDC (4,8-diaminonaphthalene-2,6-dicarboxylic acid, NDC-2NH2) as linkers, have been studied in photoelectrocatalytic disinfection processes. The Zr-based MOFs were deposited onto graphite paper and were deeply analysed to unravel their behaviour in electrocatalytic (EC), photocatalytic (PC) and photoelectrocatalytic (PEC) configurations under solar (Xe-arc lamp), visible (Xe-arc lamp + 400 nm cut-off filter) and 365 nm UV-LED irradiation. TPC results showed reproducible photocurrent response upon repeated on–off cycles and bandgaps were calculated to be 3.13 and 2.11 eV for Zr-NDC and Zr-NDC-2NH2, respectively. The highest photocurrent was obtained for 365 nm UVA in Zr-NDC and was similar for both UVA and solar irradiation in the case of Zr-NDC-2NH2. The Zr-MOFs catalytic electrodes were evaluated for their disinfection activity using a strain of Staphylococcus aureus and performance tracked by measuring colony forming units (CFU). The disinfection efficiency was higher in PEC than PC studies (>2-log reduction or 99 % CFU inhibition) under 365 nm UVA irradiation, suggesting that the anodic bias potential effectively minimized the recombination of the photogenerated electron-hole pairs. A complete disinfection was reached after 60 and 20 min under irradiation of full Xe-arc (solar) spectrum in PC and PEC runs, respectively, for both Zr-MOFs. The high disinfection capacity under solar irradiation was attributed to the transfer of photoexcited electrons from ligand to cluster by high energy photons. © 2021 Elsevier B.V., the FPU grant FPU17/03096. CIE acknowledges the funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 754382., Peer reviewed
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Performance map analysis of a solar-driven and fully unfired closed-cycle micro gas turbine

  • Rovense, Francesco|||0000-0002-5743-530X
  • Sebastián Herrera, Andrés|||0000-0002-2667-5909
  • Abbas Cámara, Rubén|||0000-0003-3948-3292
  • Romero Álvarez, Manuel|||0000-0001-8152-1331
  • González Aguilar, José|||0000-0001-9641-2330
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hf/porphyrin-based metal-organic framework PCN-224 for CO2 cycloaddition with epoxides

  • Carrasco, Sergio|||0000-0003-0024-1392
  • Orcajo, Gisela
  • Martínez Castillejo, Fernando
  • Imaz, Inhar|||0000-0002-0278-1141
  • Kavak, Safiyye
  • Arenas Esteban, Daniel|||0000-0002-5626-9848
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Bals, Sara|||0000-0002-4249-8017
  • Calleja, Guillermo
  • Horcajada, Patricia|||0000-0002-6544-5911
Herein, we describe for the first time the synthesis of the highly porous Hf-tetracarboxylate porphyrin-based metal-organic framework (MOF) (Hf)PCN-224(M) (M = H, Co). (Hf)PCN-224(H) was easily and efficiently prepared following a simple microwave-assisted procedure with good yields (56-67%; space-time yields: 1100-1270 kg m·day), high crystallinity and phase purity by using trifluoromethanesulfonic acid and benzoic acid as modulators in less than 30 min. By simply introducing a preliminary step (10 min), 5,10,15,20-(tetra-4-carboxyphenyl)porphyrin linker (TCPP) was quantitatively metalated with Co without additional purification and/or time consuming protection/deprotection steps to further obtain (Hf)PCN-224(Co). (Hf)PCN-224(Co) was then tested as catalyst in CO cycloaddition reaction with different epoxides to yield cyclic carbonates, showing the best catalytic performance described to date compared to other PCNs, under mild conditions (1 bar CO, room temperature, 18-24 h). Twelve epoxides were tested, obtaining from moderate to excellent conversions (35-96%). Moreover, this reaction was gram scaled-up (x50) without significant loss of yield to cyclic carbonates. (Hf)PCN-224(Co) maintained its integrity and crystallinity even after 8 consecutive runs, and poisoning was efficiently reverted by a simple thermal treatment (175 °C, 6 h), fully recovering the initial catalytic activity.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

On power line positioning systems

  • Lovisolo, Lisandro
  • Cruz Roldán, Fernando|||0000-0001-6843-5199
  • Blanco Velasco, Manuel|||0000-0001-6593-1517
Power line infrastructure is available almost everywhere. Positioning systems aim to estimate where a device or target is. Consequently, there may be an opportunity to use power lines for positioning purposes. This survey article reports the different efforts, working principles, and possibilities for implementing positioning systems relying on power line infrastructure for power line positioning systems (PLPS). Since Power Line Communication (PLC) systems of different characteristics have been deployed to provide communication services using the existing mains, we also address how PLC systems may be employed to build positioning systems. Although some efforts exist, PLPS are still prospective and thus open to research and development, and we try to indicate the possible directions and potential applications for PLPS., European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

A semi-supervised learning approach to study the energy consumption in smart buildings

  • Quintero Gull, Carlos
  • Aguilar Castro, José Lisandro|||0000-0003-4194-6882
  • Rodríguez Moreno, María Dolores|||0000-0002-7024-0427
IEEE Symposium Series on Computational Intelligence (IEEE SSCI 2021), 05/12/2021-07/12/2021., In this work, we use the semi-supervised LAMDA-HSCC algorithm for characterizing the energy consumption in smart buildings, which can work with labeled and unlabeled data. Particularly, it uses the LAMDA-RD approach for the clustering problem and the LAMDA-HAD approach for the classification problem. Additionally, this algorithm uses three submodels for merging, partition groups (classes/cluster) and migrating individuals from a group to another. For the performance evaluation, several datasets of energetic consumption are used, with different percent of labeled data, showing very encouraging results according to two metrics in the semi-supervised context., European Commission, Agencia Estatal de Investigación, Junta de Comunidades de Castilla-La Mancha
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Autonomous cycle of data analysis tasks for scheduling the use of controllable load appliances using renewable energy

  • Aguilar Castro, José Lisandro|||0000-0003-4194-6882
  • Giraldo, Juan
  • Zapata, Manuela
  • Jaramillo, Andrés
  • Zuluaga, Luis
  • Rodríguez Moreno, María Dolores|||0000-0002-7024-0427
International Conference on Computational Science and Computational Intelligence, 15/12/2021-17/12/2021, Estados Unidos., With the arrival of smart edifications with renewable energy generation capacities, new possibilities for optimizing the use of the energy network appear. In particular, this work defines a system that automatically generates hours of use of the controllable load appliances (washing machine, dishwasher, etc.) within these edifications, in such a way that the use of renewable energy is maximized. To achieve this, we are based on the hypothesis that depending on the climate, a prediction can be made of how much energy will be generated and, according to the behavior of the users, the energy demand required by these appliances. Following this hypothesis, we build an autonomous cycle of data analysis tasks composed of three tasks, two tasks for estimating the required load (demand) and the renewable energy produced (supply), coupled with a scheduling task to generate the plans of use of appliances. The results indicate that it is possible to carry out optimal scheduling of the use of appliances, but that they depend on the quality of the predictions of supply and demand., European Commission, Agencia Estatal de Investigación, Junta de Comunidades de Castilla-La Mancha
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

High-order input-reflectionless quasi-elliptic-type wideband bandpass filter using dual-mode slotline resonator

  • Yang, Li|||0000-0002-1264-4810
  • Psychogiou, Dimitra
  • Gómez García, Roberto|||0000-0001-9132-6927
2022 Asia-Pacific Microwave Conference (APMC), 29 November to 02 December 2022, Yokohama, Japan., A high-order input-reflectionless quasi-elliptic-type wideband bandpass filter (BPF) that exploits a complementary-diplexer-based topology is reported. Firstly, a fourth-order wideband microstrip-to-microstrip vertical transition employing a dual-mode slotline resonator as the reflective-type BPF channel is designed. It features a sharp-rejection BPF response with two close-to-passband transmission zeros (TZs). To attain broadband input-reflectionless behavior, a shunt resistively-terminated microstrip π-shape network is used as the absorptive bandstop-filter (BSF) channel. The RF theoretical operational principle of the conceived broadband BPF is detailed. Compared to prior-art high-order input-/two-port-reflectionless wideband BPFs, the proposed BPF features not only improved passband flatness at the passband edges, but also relatively-high stopband power-attenuation levels and power-absorption ratios. For experimental-validation purposes, a two-layer fourth-order BPF microstrip prototype centered at 1 GHz is developed and tested., European Commission, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Planar high-order broad-band bandpass filters based on two-stage quadrature couplers and their digital modeling

  • Yang, Li|||0000-0002-1264-4810
  • Martínez Piqueras, Gaspar
  • Muñoz Ferreras, José María|||0000-0003-1929-3934
  • Gómez García, Roberto|||0000-0001-9132-6927
2022 24th International Microwave and Radar Conference (MIKON), 12-14 September 2022, Gdansk, Poland., Planar two-stage branch-line directional power couplers are applied in this paper to the design of transversalsignal-interference high-order wide-band bandpass filters (BPFs) with very-sharp-rejection characteristics. In comparison with the previously-reported experimental BPF demonstrators of their precursors—i.e., those using transversal filtering sections (TFSs) with one-stage branch-line couplers loaded by longer dissimilar stubs—, an enlarged-bandwidth passband with a higher number of in-band reflection zeros and lower amplitude variation can be obtained. Moreover, multiple transmission zeros (TZs) can be created in the out-of-band region owing to the intrinsic signal-energy cancelation phenomena of the transversal signal-interference philosophy, which result in highselectivity filtering capabilities. As further conceptual understanding of the devised two-stage-coupler signal-interference BPFs, a digital-modeling interpretation for various illustrative synthesis examples is provided. In addition, for experimentalvalidation purposes, single- and two-TFS-based microstrip prototypes of wide-band BPFs centered at 2 GHz are manufactured and characterized. In these circuits, inter-digital-type input/output feeding sections are co-integrated. They allow to extend the lower/upper stopband bandwidths with regard to those inherent to their isolated two-stage-coupler-based TFSs., Agencia Estatal de Investigación, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Model Guided Road Intersection Classification

  • Ballardini, Augusto Luis|||0000-0001-6688-5081
  • Hernández Saz, Álvaro|||0000-0002-3779-6474
  • Sotelo Vázquez, Miguel Ángel|||0000-0001-8809-2103
2021 IEEE Intelligent Vehicles Symposium (IV), 11/07/2021-17/07/2021, Nagoya, Japón., Understanding complex scenarios from in-vehicle cameras is essential for safely operating autonomous driving systems in densely populated areas. Among these, intersection areas are one of the most critical as they concentrate a considerable number of traffic accidents and fatalities. Detecting and understanding the scene configuration of these usually crowded areas is then of extreme importance for both autonomous vehicles and modern Advanced Driver Assistance Systems (ADAS), aimed at preventing road crashes and increasing the safety of Vulnerable Road Users (VRU). This work investigates how to classify intersection areas from RGB images using well-consolidated neural network approaches along with a method to enhance the results based on the teacher/student training paradigm. An extensive experimental activity aimed at identifying the best input configuration and evaluating different network parameters on both the well-known KITTI dataset and the new KITTI-360 sequences shows that our method outperforms current state-of-the-art intersection classification approaches on per-frame basis, proving the effectiveness of the proposed learning scheme., European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Evaluating the use of a Net-Metering mechanism in microgrids to reducepower generation costs with a swarm-intelligent algorithm

  • Gil Marcelino, Carolina
  • Matos Cardoso Leite, Gabriel|||0000-0002-1486-346X
  • Fialho Wanner, Elizabeth
  • Jiménez Fernández, Silvia|||0000-0002-2065-1754
  • Salcedo Sanz, Sancho|||0000-0002-4048-1676
The micro-generation of electricity arises as a clean and efficient alternative to provide electrical power. However, the unpredictability of wind and solar radiation poses a challenge to attend load demand, while maintaining a stable operation of the microgrids (MGs). This paper proposes the modeling and optimization, using a swarm-intelligent algorithm, of a hybrid MG system (HMGS) with a Net-Metering compensation policy. Using real industrial and residential data from a Spanish region, a HMGS with a generic ESS is used to analyze the influence of four different Net-Metering compensation levels regarding costs, percentage of renewable energy sources (RESs), and LOLP. Furthermore, the performance of two ESSs, Lithium Titanate Spinel (Li4Ti5O12 (LTO)) and Vanadium redox flow batteries (VRFB), is assessed in terms of the final $/kWh costs provided by the MG. The results obtained indicate that the Net-Metering policy reduces the surplus from over 14% to less than 0.5% and increases RESs participation in the MG by more than 10%. Results also show that, in a yearly projection, a MG using a VRFB system with a 25% compensation policy can yield more than 100000$ dollars of savings, when compared to a MG using a LTO system without Net-Metering., European Commission, Agencia Estatal de Investigación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

CAPformer: pedestrian crossing action prediction using transformer

  • Lorenzo Diaz, Javier|||0000-0001-6350-2460
  • Parra Alonso, Ignacio|||0000-0002-3889-018X
  • Izquierdo Gonzalo, Rubén|||0000-0002-6722-3036
  • Ballardini , Augusto Luis|||0000-0001-6688-5081
  • Hernández Saz, Álvaro|||0000-0002-3779-6474
  • Fernández Llorca, David|||0000-0003-2433-7110
  • Sotelo Vázquez, Miguel Ángel|||0000-0001-8809-2103
Anticipating pedestrian crossing behavior in urban scenarios is a challenging task for autonomous vehicles. Early this year, a benchmark comprising JAAD and PIE datasets have been released. In the benchmark, several state-of-the-art methods have been ranked. However, most of the ranked temporal models rely on recurrent architectures. In our case, we propose, as far as we are concerned, the first self-attention alternative, based on transformer architecture, which has had enormous success in natural language processing (NLP) and recently in computer vision. Our architecture is composed of various branches which fuse video and kinematic data. The video branch is based on two possible architectures: RubiksNet and TimeSformer. The kinematic branch is based on different configurations of transformer encoder. Several experiments have been performed mainly focusing on pre-processing input data, highlighting problems with two kinematic data sources: pose keypoints and ego-vehicle speed. Our proposed model results are comparable to PCPA, the best performing model in the benchmark reaching an F1 Score of nearly 0.78 against 0.77. Furthermore, by using only bounding box coordinates and image data, our model surpasses PCPA by a larger margin (F1=0.75 vs. F1=0.72). Our model has proven to be a valid alternative to recurrent architectures, providing advantages such as parallelization and whole sequence processing, learning relationships between samples not possible with recurrent architectures., European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

A multi-label approach for diagnosis problems in energy systems using LAMDA algorithm

  • Quintero Gull, Carlos
  • Aguilar Castro, José Lisandro|||0000-0003-4194-6882
  • Rodríguez Moreno, María Dolores|||0000-0002-7024-0427
2022 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE), 18-23 July 2022, Italia., In this paper, we propose a supervised multilabel algorithm called Learning Algorithm for Multivariate Data Analysis for Multilabel Classification (LAMDA-ML). This algorithm is based on the algorithms of the LAMDA family, in particular, on the LAMDA-HAD (Higher Adequacy Grade) algorithm. Unlike previous algorithms in a multi-label context, LAMDA-ML is based on the Global Adequacy Degree (GAD) of an individual in multiple classes. In our proposal, we define a membership threshold (Gt), such that for all GAD values above this threshold, it implies that an individual will be assigned to the respective classes. For the evaluation of the performance of this proposal, a solar power generation dataset is used, with very encouraging results according to several metrics in the context of multiple labels., European Commission, Agencia Estatal de Investigación, Junta de Comunidades de Castilla-La Mancha
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Fail-aware LIDAR-based odometry for autonomous vehicles

  • García Daza, Iván|||0000-0001-8940-6434
  • Rentero Alonso de Linaje, Mónica|||0000-0002-5543-3247
  • Salinas Maldonado, Carlota|||0000-0003-2330-1001
  • Izquierdo Gonzalo, Rubén|||0000-0002-6722-3036
  • Hernández Parra, Noelia|||0000-0002-6644-9498
  • Ballardini, Augusto Luis|||0000-0001-6688-5081
  • Fernández Llorca, David|||0000-0003-2433-7110
Autonomous driving systems are set to become a reality in transport systems and, so, maximum acceptance is being sought among users. Currently, the most advanced architectures require driver intervention when functional system failures or critical sensor operations take place, presenting problems related to driver state, distractions, fatigue, and other factors that prevent safe control. Therefore, this work presents a redundant, accurate, robust, and scalable LiDAR odometry system with fail-aware system features that can allow other systems to perform a safe stop manoeuvre without driver mediation. All odometry systems have drift error, making it difficult to use them for localisation tasks over extended periods. For this reason, the paper presents an accurate LiDAR odometry system with a fail-aware indicator. This indicator estimates a time window in which the system manages the localisation tasks appropriately. The odometry error is minimised by applying a dynamic 6-DoF model and fusing measures based on the Iterative Closest Points (ICP), environment feature extraction, and Singular Value Decomposition (SVD) methods. The obtained results are promising for two reasons: First, in the KITTI odometry data set, the ranking achieved by the proposed method is twelfth, considering only LiDAR-based methods, where its translation and rotation errors are 1.00% and 0.0041 deg/m, respectively. Second, the encouraging results of the fail-aware indicator demonstrate the safety of the proposed LiDAR odometry system. The results depict that, in order to achieve an accurate odometry system, complex models and measurement fusion techniques must be used to improve its behaviour. Furthermore, if an odometry system is to be used for redundant localisation features, it must integrate a fail-aware indicator for use in a safe manner., Universidad de Alcalá, Comunidad de Madrid, Agencia Estatal de Investigación, Ministerio de Economía y Competitividad, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Input-absorptive high-order wideband balun bandpass filters with quasi-elliptic-type response

  • Yang, Li|||0000-0002-1264-4810
  • Gómez García, Roberto|||0000-0001-9132-6927
2022 52th European Microwave Conference (EuMC), 27-29 September 2022, Milan, Italy., A class of input-reflectionless high-order wideband balun bandpass filters (BPFs) with quasi-elliptic-type response are reported. They consist of two main circuit parts: 1) a three-port reflective-type high-order balun BPF network and 2) a resistivelyterminated microstrip T-junction that is shunt connected at the unbalanced port. The reflective-type balun BPFs developed with 5th- and 6th-order Chebyshev equal-ripple responses are firstly described. By replacing the last two virtually-short-circuit-ended quarter-wavelength transmission-line (TL) stubs with opencircuit-ended half-wavelength TL stubs, their balun counterparts with two close-to-passband transmission zeros (TZs) are then presented. As design example, a 5th-order input-reflectionless quasi-elliptic-type wideband balun BPF is theoretically discussed. Furthermore, for experimental-validation purposes, a proof-ofconcept two-layer microstrip prototype of 5th-order balun BPF is simulated and tested. Its measured metrics are 2.05-GHz center frequency, 3-dB fractional bandwidth of 63.61% for the two output ports, input-power-matching levels higher than 10 dB, and stopband-power-rejection levels above 26.1 dB from DC to 5 GHz., European Commission, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

An improved C-DEEPSO algorithm for optimal active-reactive power dispatch in microgrids with electric vehicles

  • Gil Marcelino, Carolina
  • Matos Cardoso Leite, Gabriel|||0000-0002-1486-346X
  • Jiménez Fernández, Silvia|||0000-0002-2065-1754
  • Salcedo Sanz, Sancho|||0000-0002-4048-1676
In the last years, our society's high energy demand has led to the proposal of novel ways of consuming and producing electricity. In this sense, many countries have encouraged micro generation, including the use of renewable sources such as solar irradiation and wind generation, or considering the insertion of electric vehicles as dispatchable units on the grid. This work addresses the Optimal active&-reactive power dispatch (OARPD) problem (a type of optimal power flow (OPF) task) in microgrids considering electric vehicles. We used the modified IEEE 57 and IEEE 118 bus-systems test scenarios, in which thermoelectric generators were replaced by renewable generators. In particular, under the IEEE 118 bus system, electric vehicles were integrated into the grid. To solve the OARDP problem, we proposed the use and improvement of the Canonical Differential Evolutionary Particle Swarm Optimization (C-DEEPSO) algorithm. For further refinement in the search space, C-DEEPSO relies on local search operators. The results indicated that the proposed improved C-DEEPSO was able to show generation savings (in terms ofmillions of dollars) acting as a dispatch controller against two algorithms based on swarm intelligence., European Commission, Agencia Estatal de Investigación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Cross-entropy boosted CRO-SL for optimal power flow in smart grids

  • Gil Marcelino, Carolina
  • Pérez Aracil, Jorge|||0000-0002-4456-9886
  • Fialho Wanner, Elizabeth
  • Jiménez Fernández, Silvia|||0000-0002-2065-1754
  • Matos Cardoso Leite, Gabriel|||0000-0002-1486-346X
  • Salcedo Sanz, Sancho|||0000-0002-4048-1676
Optimal power flow (OPF) is a complex, highly nonlinear, NP-hard optimization problem, in which the goal is to determine the optimal operational parameters of a power-related system (in many cases a type of smart or micro grid) which guarantee an economic and effective power dispatch. In recent years, a number of approaches based on metaheuristics algorithms have been proposed to solve OPF problems. In this paper, we propose the use of the Cross-Entropy (CE) method as a first step depth search operator to assist population-based evolutionary methods in the framework of an OPF problem. Specifically, a new variant of the Coral Reefs Optimization with Substrate Layers algorithm boosted with CE method (CE+CRO-SL) is presented in this work. We have adopted the IEEE 57-Bus System as a test scenario which, by default, has seven thermal generators for power production for the grid. We have modified this system by replacing three thermal generators with renewable source generators, in order to consider a smart grid approach with renewable energy production. The performance of CE+CRO-SL in this particular case study scenario has been compared with that of well-known techniques such as population?s methods CMA-ES and EPSO (both boosted with CE). The results obtained indicate that CE+CRO-SL showed a superior performance than the alternative techniques in terms of efficiency and accuracy. This is justified by its greater exploration capacity, since it has internally operations coming from different heuristics, thus surpassing the performance of classic methods. Moreover, in a projection analysis, the CE+CRO-SL provides a profit of millions of dollars per month in all cases tested considering the modified version of the IEEE 57-Bus smart grid system., European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Vehicle Localization Using 3D Building Models and Point Cloud Matching

  • Ballardini, Augusto Luis|||0000-0001-6688-5081
  • Fontana, Simone
  • Cattaneo, Daniele
  • Matteucci, Matteo
  • Sorrenti, Domenico Giorgio
Detecting buildings in the surroundings of an urban vehicle and matching them to building models available on map services is an emerging trend in robotics localization for urban vehicles. In this paper, we present a novel technique, which improves a previous work by detecting building facade, their positions, and finding the correspondences with their 3D models, available in OpenStreetMap. The proposed technique uses segmented point clouds produced using stereo images, processed by a convolutional neural network. The point clouds of the facades are then matched against a reference point cloud, produced extruding the buildings' outlines, which are available on OpenStreetMap (OSM). In order to produce a lane-level localization of the vehicle, the resulting information is then fed into our probabilistic framework, called Road Layout Estimation (RLE). We prove the effectiveness of this proposal, testing it on sequences from the well-known KITTI dataset and comparing the results concerning a basic RLE version without the proposed pipeline., European Union, Marie Skłodowska Curie
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Approaches based on LAMDA control applied to regulate HVAC systems for buildings

  • Morales, L.
  • Pozo-Espín, D.
  • Aguilar Castro, José Lisandro|||0000-0003-4194-6882
  • Rodríguez Moreno, María Dolores|||0000-0002-7024-0427
The control of HVAC (Heating Ventilation and Air Conditioning) systems is usually complex because its modeling in certain cases is difficult, since these systems have a large number of components. Heat exchangers, chillers, valves, sensors, and actuators, increase the non-linear characteristics of the complete model, so it is necessary to propose new control strategies that can handle the uncertainty generated by all these elements working together. On the other hand, artificial intelligence is a powerful tool that allows improving the performance of control systems with inexact models and uncertainties. This paper presents new control alternatives for HVAC systems based on LAMDA (Learning Algorithm for Multivariable Data Analysis). This algorithm has been used in the field of machine learning, however, we have taken advantage of its learning characteristics to propose different types of intelligent controllers to improve the performance of the overall control system in tasks of regulation and reference change. In order to perform a comparative analysis in the context of HVAC systems, conventional methods such as PID and Fuzzy-PID are compared with LAMDA-PID, LAMDA-Sliding Mode Control based on Z-numbers (ZLSMC), and Adaptive LAMDA. Specifically, two HVAC systems are implemented by simulations to evaluate the proposals: an MIMO (Multiple-input Multiple-output) HVAC system and an HVAC system with dead time, which are used to compare the results qualitatively and quantitatively. The results show that ZLSMC is the most robust controller, which efficiently controls HVAC systems in cases of reference changes and the presence of disturbances., European Commission, Agencia Estatal de Investigación, Junta de Comunidades de Castilla-La Mancha
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Polymeric ruthenium precursor as a photoactivated antimicrobial agent

  • Ghosh , Srabanti
  • Amariei , Georgiana|||0000-0002-5412-6325
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
  • Rosal García, Roberto|||0000-0003-0816-8775
12 p., Ruthenium coordination compounds have demonstrated a promising anticancer and antibacterial activity, but their poor water solubility and low stability under physiological conditions may limit their therapeutic appli-cations. Physical encapsulation or covalent conjugation with polymers may overcome these drawbacks, but generally involve multistep reactions and purification processes. In this work, the antibacterial activity of the polymeric precursor dicarbonyldichlororuthenium (II) [Ru(CO)(2)Cl-2]n has been studied against Escherichia coli and Staphylococcus aureus. This Ru-carbonyl precursor shows minimum inhibitory concentration at nanogram per millilitre, which renders it a novel antimicrobial polymer without any organic ligands. Besides, [Ru(CO)(2)Cl-2](n) antimicrobial activity is markedly boosted under photoirradiation, which can be ascribed to the enhanced generation of reactive oxygen species under UV irradiation. [Ru(CO)(2)Cl-2](n) has been able to inhibit bacterial growth via the disruption of bacterial membranes and triggering upregulation of stress responses as shown in microscopic measurements. The activity of polymeric ruthenium as an antibacterial material is significant even at 6.6 ng/mL while remaining biocompatible to the mammalian cells at much higher concentrations. This study proves that this simple precursor, [Ru(CO)(2)Cl-2](n), can be used as an antimicrobial compound with high activity and a low toxicity profile in the context of need for new antimicrobial agents to fight bacterial infections., Unión Europea, Ministerio de Economía y Competitividad, Universidad de Alcalá
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Urban intersection classification: a comparative analysis

  • Ballardini, Augusto Luis|||0000-0001-6688-5081
  • Hernández Saz, Álvaro|||0000-0002-3779-6474
  • Carrasco Limeros, Sandra
  • Lorenzo Diaz, Javier|||0000-0001-6350-2460
  • Parra Alonso, Ignacio|||0000-0002-3889-018X
  • Hernández Parra, Noelia|||0000-0002-6644-9498
  • García Daza, Iván|||0000-0001-8940-6434
  • Sotelo Vázquez, Miguel Ángel|||0000-0001-8809-2103
Understanding the scene in front of a vehicle is crucial for self-driving vehicles and Advanced Driver Assistance Systems, and in urban scenarios, intersection areas are one of the most critical, concentrating between 20% to 25% of road fatalities. This research presents a thorough investigation on the detection and classification of urban intersections as seen from onboard front-facing cameras. Different methodologies aimed at classifying intersection geometries have been assessed to provide a comprehensive evaluation of state-of-the-art techniques based on Deep Neural Network (DNN) approaches, including single-frame approaches and temporal integration schemes. A detailed analysis of most popular datasets previously used for the application together with a comparison with ad hoc recorded sequences revealed that the performances strongly depend on the field of view of the camera rather than other characteristics or temporal-integrating techniques. Due to the scarcity of training data, a new dataset is created by performing data augmentation from real-world data through a Generative Adversarial Network (GAN) to increase generalizability as well as to test the influence of data quality. Despite being in the relatively early stages, mainly due to the lack of intersection datasets oriented to the problem, an extensive experimental activity has been performed to analyze the individual performance of each proposed systems., European Commission, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Analysis of customer energy consumption patterns using an online fuzzy clustering technique

  • Aguilar Castro, José Lisandro|||0000-0003-4194-6882
  • Quintero Gull, Carlos
  • Rodríguez Moreno, María Dolores|||0000-0002-7024-0427
  • Viera, Juan
2022 IEEE International Conference on Fuzzy Systems (FUZZ-IEEE), 18/07/2022-23/07/2022, Italia., Currently, there is a high rate of generation of new information about the Energy Consumption of customers. It is important the traceability of its consumption pattern evolution to determine in real-time the services of a smart energy management system. This paper analyses the evolution of the Energy Consumption Pattern of customers using the Learning Algorithm for Multivariable Data Analysis (LAMDA). LAMDA is a fuzzy approach for supervised and unsupervised learning, based on the calculation of the Global Adequacy Degree (GAD) of one individual to a class/cluster, through the contributions of all its descriptors. LAMDA can create new classes/clusters after the training stage (online learning). If an individual does not have enough similarity to the preexisting classes/clusters, it is evaluated with respect to a threshold called the Non-Informative Class (NIC) to define if it is a new class/cluster. Particularly, the algorithm of the LAMDA family used in this paper is LAMDA-RD (Robust Distance). In the paper is analyzed the patterns of the initial grouping of the data, as well as, the patterns through their evolution (traceability). For the analysis of the patterns different metrics are considers: Calinski- Harabasz Index and Silhouette Score., European Commission, Agencia Estatal de Investigación, Junta de Comunidades de Castilla-La Mancha
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Balanced quasi-elliptic-type dual-passband filters using planar transversal coupled-line sections and their digital modeling

  • Yang, Li|||0000-0002-1264-4810
  • Malki, Mohamed
  • Muñoz Ferreras, José María|||0000-0003-1929-3934
  • Gómez García, Roberto|||0000-0001-9132-6927
A class of balanced dual-band bandpass filters (BPFs) with planar transversal-signal-interference coupled-line sections is reported. In their building balanced dual-band BPF stage under differential-mode excitation, a second-order quasi-elliptic-type dual-band bandpass filtering transfer function is obtained. Specifically, from the transversal interaction among their two open-ended and virtually-short-ended half-wavelength coupled-line paths, sharp-rejection differential-mode dual passbands with several out-of-band transmission zeros at both sides are realized. To attain high common-mode suppression levels within the differential-mode passbands, two open-ended line segments are connected at the symmetry plane of the devised balanced dual-band BPF stage. Moreover, higher-order schemes based on in-series-cascaded multi-stage designs to further increase differential-mode selectivity and in-band common-mode rejection are illustrated. The operational principles and parametric-analysis design rules of the engineered transversal-coupled-line-based balanced dual-band BPF approach are detailed. Additionally, for a rigorous interpretation of their zero/pole characteristics, a digital-modeling framework is applied to them to connect RF balanced filters with their discrete-time versions. For practical-validation purposes, a microstrip prototype of two-stage/fourth-order balanced dual-band BPF is built and tested. It exhibits measured differential-mode dual passbands with center frequencies of 1.464 GHz and 2.294 GHz, 3-dB fractional bandwidths of 8.74% and 9.68%, and in-band common-mode rejection levels above 23.16 dB and 31.36 dB, respectively., European Commission, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Input-reflectionless low-pass filter on multilayered diplexer-based topology

  • Yang, Li|||0000-0002-1264-4810
  • Gómez García, Roberto|||0000-0001-9132-6927
  • Muñoz Ferreras, José María|||0000-0003-1929-3934
  • Zhang, Runqi
A class of two-layered input-reflectionless diplexer-based LPF is reported in this letter. By using a resistively-terminated wideband microstrip vertical transition by the first time for this application, an input-reflectionless response for the conceived LPF device is realized. The RF operational foundations and theoretical examples of this input-reflectionless LPF design approach have been shown and experimentally verified with the development and characterization of a two-LPF-unit microstrip prototype with extended reflectionless stopband., Ministerio de Economía, Industria y Competitividad, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Bio-Based Polyether from Limonene Oxide Catalytic ROP as Green Polymeric Plasticizer for PLA

  • Sessini, Valentina|||0000-0003-1205-4586
  • Palenzuela Cebrián, Miguel|||0000-0002-1003-6803
  • Damián Burgoa, Jesús|||0000-0002-0335-6227
  • González Mosquera, Marta Elena|||0000-0003-2248-3050
In this work, the polymerization of Limonene Oxide (LO) has been achieved using an Earth abundant metal-based catalyst developed in our group, that is very active in ring opening polymerization (ROP) processes. The bio-based polylimonene ether (PLO) obtained had low molecular weight and good thermal properties, thus being a potential green polymeric additive for other bio-based polymers such as PLA. Hence, we have explored its ability to influence PLA properties. The addition of only 10 wt %, led to the modification and improvement of PLA properties in terms of flexibility, thermal stability, and hydrophobicity. The results obtained are promising and open up the potential industrial application of PLO for the melt-processing of blends based on PLA/PLO. These new materials are totally based on renewable sources and may be interesting for many applications where biodegradability and reduced water adsorption is required, such as food packaging or agricultural mulch films.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Balanced quasi-elliptic-type combline diplexer with multiextracted-pole junction/output sections

  • Gómez García, Roberto|||0000-0001-9132-6927
  • Yang, Li|||0000-0002-1264-4810
  • Muñoz Ferreras, José María|||0000-0003-1929-3934
A class of coupled-multiline quasi-elliptic-type balanced diplexer device with closely spaced channels and its balanced coupling-routing-diagram formalism to simultaneously model its differential- and common-mode operation are reported. It employs third-order combline-type bandpass filters (BPFs) in its filtering channels, whose resonating lines are connected at one of their extremes to the symmetry plane of the balanced-circuit structure (i.e., virtual grounds for the differential mode), along with a multiextracted-pole/coupled-multiline dual-band BPF junction and single-band BPF output cells. In differential-mode operation, the dual-band BPF junction adds one in-band pole to each diplexer channel and three transmission zeros (TZs) to both channels, whereas the single-band BPF output cells incorporate one in-band pole and two TZs in their corresponding channels. In this manner, increased-selectivity differential-mode BPF transfer functions for the diplexer channels when compared to those of its third-order combline-type BPFs are obtained. Grounded resistors are connected at the symmetry plane of the balanced diplexer for all the resonating lines of the combline-type BPFs, which become detuned with regard to the poles associated with the dual-band BPF junction and the single-band BPF output cells under common-mode excitation. This allows for high common-mode suppression levels in wide spectral ranges to be realized for both channels while maintaining the same TZs as in differential-mode operation. For practical-validation purposes, a 1.6-GHz/1.8-GHz microstrip prototype is manufactured and tested., Ministerio de Economía, Industria y Competitividad, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

A systematic literature review on the use of artificial intelligence in energy self-management in smart buildings

  • Aguilar Castro, José Lisandro|||0000-0003-4194-6882
  • Garcés Jiménez, Alberto|||0000-0002-1365-9280
  • Rodríguez Moreno, María Dolores|||0000-0002-7024-0427
  • García, Rodrigo
Buildings are one of the main consumers of energy in cities, which is why a lot of research has been generated around this problem. Especially, the buildings energy management systems must improve in the next years. Artificial intelligence techniques are playing and will play a fundamental role in these improvements. This work presents a systematic review of the literature on researches that have been done in recent years to improve energy management systems for smart building using artificial intelligence techniques. An originality of the work is that they are grouped according to the concept of "Autonomous Cycles of Data Analysis Tasks", which defines that an autonomous management system requires specialized tasks, such as monitoring, analysis, and decision-making tasks for reaching objectives in the environment, like improve the energy efficiency. This organization of the work allows us to establish not only the positioning of the researches, but also, the visualization of the current challenges and opportunities in each domain. We have identified that many types of researches are in the domain of decision-making (a large majority on optimization and control tasks), and defined potential projects related to the development of autonomous cycles of data analysis tasks, feature engineering, or multi-agent systems, among others., European Commission, Junta de Comunidades de Castilla-La Mancha, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Low emission zones: Effects on alternative-fuel vehicle uptake and fleet CO2 emissions

  • Peters, Jens|||0000-0002-4802-7806
  • Burguillo Cuesta, María Mercedes|||0000-0003-3328-4487
  • Arranz Muñoz, José María|||0000-0001-8112-2867
This study analyses the effect of a representative low-emission zone (LEZ) in Madrid on shifting vehicle registrations towards alternative fuel technologies and its effectiveness for reducing vehicle fleet CO2 emissions. Vehicle registration data is combined with real life fuel consumption values on individual vehicle model level, and the impact of the LEZ is then determined via an econometric approach. The increase in alternative fuel vehicles (AFV) registration shares due to the LEZ is found to be significant but fosters rather fossil fuel powered AFV and plug-in hybrid electric vehicles (PHEV) than zero emission vehicles. This is reflected in the average CO2 emissions of newly registered vehicles, which do not decrease significantly. In consequence, while the LEZ is a suitable measure for stimulating the shift towards low emission vehicles, a true zero emission zone would be required for effectively fostering also the decarbonization of the vehicle fleet.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Reinventing exergy as indicator for resource depletion impacts in LCA

  • Peters, Jens|||0000-0002-4802-7806
While resource aspects are gaining increasing importance for the sustainability assessment of new technologies, the question of how to assess the depletion of abiotic resources is still controversially discussed. Different methodologies exist for their quantification within life cycle assessment (LCA). Among them, thermodynamic approaches have the advantage of considering aspects of absolute quantity (reserves or amount of a substance contained in total in earth's crust) and of quality (concentration of the target element in the mined resource), making them a potentially appealing approach for assessing resource depletion. However, existing approaches are either far from the original thermodynamic idea of exergy or far too complex and not applicable for resource accounting. This work briefly discusses the suitability of exergy-based approaches for resource assessment, and then suggests a simple but comprehensive methodology for quantifying resource depletion related with the concept of chemical concentration exergy (MDPces). It provides a calculation approach for quantifying the MDPces and estimates the corresponding values for some representative key metals.
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

An efficient multi-objective evolutionary approach for solving the operation of multi-reservoir system scheduling in hydro-power plants

  • Gil Marcelino, Carolina
  • Matos Cardoso Leite, Gabriel|||0000-0002-1486-346X
  • Delgado, C.A.D.M.
  • Oliveira, L.B. de
  • Fialho Wanner, Elizabeth
  • Jiménez Fernández, Silvia|||0000-0002-2065-1754
  • Salcedo Sanz, Sancho|||0000-0002-4048-1676
This paper tackles the short-term hydro-power unit commitment problem in a multi-reservoir system ? a cascade-based operation scenario. For this, we propose a new mathematical modeling in which the goal is to maximize the total energy production of the hydro-power plant in a sub-daily operation, and, simultaneously, to maximize the total water content (volume) of reservoirs. For solving the problem, we discuss the Multi-objective Evolutionary Swarm Hybridization (MESH) algorithm, a recently proposed multi-objective swarm intelligence-based optimization method which has obtained very competitive results when compared to existing evolutionary algorithms in specific applications. The MESH approach has been applied to find the optimal water discharge and the power produced at the maximum reservoir volume for all possible combinations of turbines in a hydro-power plant. The performance of MESH has been compared with that of well-known evolutionary approaches such as NSGA-II, NSGA-III, SPEA2, and MOEA/D in a realistic problem considering data from a hydro-power energy system with two cascaded hydro-power plants in Brazil. Results indicate that MESH showed a superior performance than alternative multi-objective approaches in terms of efficiency and accuracy, providing a profit of $412,500 per month in a projection analysis carried out., European Commission, Agencia Estatal de Investigación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Dynamic electric dispatch for wind power plants: a new automatic controller system using evolutionary algorithms

  • Gil Marcelino, Carolina
  • Avancini, Joäo V.C.
  • Delgado, C.A.D.M.
  • Fialho Wanner, Elizabeth
  • Jiménez Fernández, Silvia|||0000-0002-2065-1754
  • Salcedo Sanz, Sancho|||0000-0002-4048-1676
In this paper, we use an evolutionary swarm intelligence approach to build an automatic electric dispatch controller for an offshore wind power plant (WPP). The optimal power flow (OPF) problem for this WPP is solved by the Canonical Differential Evolutionary Particle Swarm Optimization algorithm (C-DEEPSO). In this paper, C-DEEPSO works as a control system for reactive sources in energy production. The control operation takes place in a daily energy dispatch, scheduled into 15 min intervals and resulting in 96 operating test scenarios. As the nature of the optimization problem is dynamic, a fine-tuning of the initialization parameters of the optimization algorithm is performed at each dispatch interval. Therefore, a version of the C-DEEPSO algorithm has been built to automatically learn the best set of initialization parameters for each scenario. For this, we have coupled C-DEEPSO with the irace tool (an extension of the iterated F-race (I/F-Race)) by using inferential statistic techniques. The experiments carried out showed that the methodology employed here is robust and able to tackle this OPF-like modeling. Moreover, the methodology works as an automatic control system for a dynamic schedule operation., European Commission, Agencia Estatal de Investigación, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

WiFiNet: WiFi-based indoor localisation using CNNs

  • Hernández Parra, Noelia|||0000-0002-6644-9498
  • Parra Alonso, Ignacio|||0000-0002-3889-018X
  • Corrales Sánchez, Héctor|||0000-0003-0240-0246
  • Izquierdo Gonzalo, Rubén|||0000-0002-6722-3036
  • Ballardini, Augusto Luis|||0000-0001-6688-5081
  • Salinas Maldonado, Carlota|||0000-0003-2330-1001
  • García Daza, Iván|||0000-0001-8940-6434
Different technologies have been proposed to provide indoor localisation: magnetic field, Bluetooth, WiFi, etc. Among them, WiFi is the one with the highest availability and highest accuracy. This fact allows for an ubiquitous accurate localisation available for almost any environment and any device. However, WiFi-based localisation is still an open problem. In this article, we propose a new WiFi-based indoor localisation system that takes advantage of the great ability of Convolutional Neural Networks in classification problems. Three different approaches were used to achieve this goal: a custom architecture called WiFiNet, designed and trained specifically to solve this problem, and the most popular pre-trained networks using both transfer learning and feature extraction. Results indicate that WiFiNet is as a great approach for indoor localisation in a medium-sized environment (30 positions and 113 access points) as it reduces the mean localisation error (33%) and the processing time when compared with state-of-the-art WiFi indoor localisation algorithms such as SVM., Agencia Estatal de Investigación, Universidad de Alcalá, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Autonomic management of a building's multi-HVAC system start-up

  • Aguilar Castro, José Lisandro|||0000-0003-4194-6882
  • Garcés Jiménez, Alberto|||0000-0002-1365-9280
  • Gómez Pulido, José Manuel|||0000-0002-6897-8262
  • Rodríguez Moreno, María Dolores|||0000-0002-7024-0427
  • Gutiérrez de Mesa, José Antonio|||0000-0002-3073-4369
  • Gallego Salvador, Nuria
Most studies about the control, automation, optimization and supervision of building HVAC systems concentrate on the steady-state regime, i.e., when the equipment is already working at its setpoints. The originality of the current work consists of proposing the optimization of building multi-HVAC systems from start-up until they reach the setpoint, making the transition to steady state-based strategies smooth. The proposed approach works on the transient regime of multi-HVAC systems optimizing contradictory objectives, such as the desired comfort and energy costs, based on the "Autonomic Cycle of Data Analysis Tasks" concept. In this case, the autonomic cycle is composed of two data analysis tasks: one for determining if the system is going towards the defined operational setpoint, and if that is not the case, another task for reconfiguring the operational mode of the multi-HVAC system to redirect it. The first task uses machine learning techniques to build detection and prediction models, and the second task defines a reconfiguration model using multiobjective evolutionary algorithms. This proposal is proven in a real case study that characterizes a particular multi-HVAC system and its operational setpoints. The performance obtained from the experiments in diverse situations is impressive since there is a high level of conformity for the multi-HVAC system to reach the setpoint and deliver the operation to the steady-state smoothly, avoiding overshooting and other non-desirable transitional effects., European Commission, Junta de Comunidades de Castilla-La Mancha, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Study on the compressive behaviour of sustainable cement-based composites under one-hour of direct flame exposure

  • Vedrtnam, Ajitanshu
  • Barluenga Badiola, Gonzalo|||0000-0002-2996-3412
  • Bedon, Chiara
Fire is a significant threat to human life and civil infrastructures. Builders and architects are hankering for safer and sustainable alternatives of concrete that do not compromise with their design intent or fire safety requirements. The aim of the present work is to improve the residual compressive performance of concrete in post-fire exposure by incorporating by-products from urban residues. Based on sustainability and circular economy motivations, the attention is focused on rubber tire fly ash, aged brick powder, and plastic (PET) bottle residuals used as partial sand replacement. The selected by-products from urban residues are used for the preparation of Cement-Based Composites (CBCs) in two different proportions (10% and 15%). Thermal CBC behaviour is thus investigated under realistic fire scenarios (i.e., Direct Flame (DF) for 1 h), by following the International Organization for Standardization (ISO) 834 standard provisions, but necessarily resulting in nonuniform thermal exposure for the cubic specimens. The actual thermal exposure is further explored with a Finite Element (FE) model, giving evidence of thermal boundaries effects. The post-fire residual compressive strength of heated concrete and CBC samples is hence experimentally derived, and compared to unheated specimens in ambient conditions. From the experimental study, the enhanced post-fire performance of CBCs with PET bottle residual is generally found superior to other CBCs or concrete. The structure-property relation is also established, with the support of Scanning Electron Microscopy (SEM) micrographs. Based on existing empirical models of literature for the prediction of the compressive or residual compressive strength of standard concrete, newly developed empirical relations for both concrete and CBCs are assessed., This project has received funding from the European Union"s Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No 754382, GOT ENERGY TALENT
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Optimal generation scheduling in hydro-power plants with the Coral Reefs Optimization algorithm

  • Gil Marcelino, Carolina
  • Salcedo Sanz, Sancho|||0000-0002-4048-1676
  • Jiménez Fernández, Silvia|||0000-0002-2065-1754
  • Camacho Gómez, Carlos
Hydro-power plants are able to produce electrical energy in a sustainable way. A known format for producing energy is through generation scheduling, which is a task usually established as a Unit Commitment problem. The challenge in this process is to define the amount of energy that each turbine-generator needs to deliver to the plant, to fulfill the requested electrical dispatch commitment, while coping with the operational restrictions. An optimal generation scheduling for turbine-generators in hydro-power plants can offer a larger amount of energy to be generated with respect to non-optimized schedules, with significantly less water consumption. This work presents an efficient mathematical modelling for generation scheduling in a real hydro-power plant in Brazil. An optimization method based on different versions of the Coral Reefs Optimization algorithm with Substrate Layers (CRO) is proposed as an effective method to tackle this problem.This approach uses different search operators in a single population to refine the search for an optimal scheduling for this problem. We have shown that the solution obtained with the CRO using Gaussian search in exploration is able to produce competitive solutions in terms of energy production. The results obtained show a huge savings of 13.98 billion (liters of water) monthly projected versus the non-optimized scheduling., European Commission, Ministerio de Economía y Competitividad, Comunidad de Madrid
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Multilayered input-reflectionless quasi-elliptic-type wideband bandpass filtering devices on diplexer-based structures

  • Yang, Li|||0000-0002-1264-4810
  • Gómez García, Roberto|||0000-0001-9132-6927
  • Fan, Maoyu
  • Zhang, Runqi
This article is an expanded version from the 2020 Asia-Pacific Microwave Conference (APMC2020), Hong Kong, Dec. 8–11, 2020 [DOI: 10.1109/APMC47863.2020.9331419]. (Corresponding authors: Li Yang; Roberto Gómez-García.), Classes of input-reflectionless wideband bandpass filters (BPFs) and balun BPF with quasi-elliptic-type (QET) responses are reported. They consist of two signal-transmission parts in multilayered diplexer-based topologies, as follows: 1) a BPF channel shaped by a two-/three-port reflective-type BPF/balun on a microstrip-to-microstrip vertical transition and 2) an input-absorptive bandstop filter (BSF) channel built with a shunt resistively terminated lowpass filter (LPF) that is composed of hybrid microstrip sections and open-circuit-ended microstrip stubs. Two real-frequency out-of-band transmission zeros (TZs) are generated in these RF filtering devices using a cascaded short-circuit-ended two-section microstrip line and two shunt open-circuit-ended half-wavelength microstrip lines, respectively. Using a higher order LPF network, enhanced passband amplitude flatness and improved stopband power absorption ratio levels for the devised BPFs are attained. As design examples, two third-order BPFs with a shunt resistively terminated microstrip T-junction and a $\pi $ -shape structure, respectively, are first provided. Afterward, a higher order BPF based on two cascaded replicas of a third-order BPF unit is designed to show highly increased stopband power attenuation levels and enhanced power absorption ratio profile within the stopband-to-passband transitions. Subsequently, their application to an input-absorptive QET fourth-order wideband balun BPF is presented. The operational principles of these BPFs and balun are detailed by the developed design procedures, in which their associated impedance-type design parameters are synthetically determined. As practical validation, four microstrip prototypes corresponding to three 2-GHz wideband BPFs and one 1-GHz broadband balun BPF are manufactured and tested. These input-reflectionless wideband filtering components experimentally feature the desired merits in terms of QET responses, enhanced passband amplitude flatness, and improved stopband power absorption ratio levels., Agencia Estatal de Investigación, European Comission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Multilayer microstrip closely-spaced-channel wideband diplexer with highly-selective fourth-order filtering responses

  • Yang, Li|||0000-0002-1264-4810
  • Gómez García, Roberto|||0000-0001-9132-6927
A type of multilayer microstrip diplexer with highlyselectivewidebandfiltering channels is reported. Its closely-spaced fourth-order passbands are attributed to two circuit parts: (i) two third-order quasi-elliptic-type microstrip-to-microstrip wideband vertical transitions and (ii) a shunt two-stub dual-band bandpass filter (BPF) junction printed on the top layer. The two microstrip vertical transitions are developed by means of open-/short-circuitended microstrip lines and slotline stepped-impedance resonators (SIRs), respectively, and they correspond to the constituent lower and upper channels. The shunt dual-band BPF junction produces one additional transmission pole and one more pair of close-topassband transmission zeros (TZs) for each channel to further increase their filtering selectivity. The RF theoretical foundations and design procedure of the engineered broadband diplexer are detailed. For practical-validation purposes, a proof-of-concept prototype of two-layer fourth-order microstrip wideband diplexer is simulated, manufactured, and tested. Its measured lower and upper channels has two closely-spaced sharp-rejection passbands with center frequencies of 1.496 GHz and 2.759 GHz and 3-dB fractional bandwidths of 62.83% and 24.83%, respectively, while featuring power-isolation levels above 27.39 dB from 0.5 to 4 GHz., European Commission, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Audio feature engineering for occupancy and activity estimation in smart buildings

  • Santiago, Gabriela
  • Jiménez, Marvin
  • Aguilar Castro, José Lisandro|||0000-0003-4194-6882
  • Montoya, Edwin
The occupancy and activity estimation are fields that have been severally researched in the past few years. However, the different techniques used include a mixture of atmospheric features such as humidity and temperature, many devices such as cameras and audio sensors, or they are limited to speech recognition. In this work is proposed that the occupancy and activity can be estimated only from the audio information using an automatic approach of audio feature engineering to extract, analyze and select descriptors/variables. This scheme of extraction of audio descriptors is used to determine the occupation and activity in specific smart environments, such that our approach can differentiate between academic, administrative or commercial environments. Our approach from the audio feature engineering is compared to previous similar works on occupancy estimation and/or activity estimation in smart buildings (most of them including other features, such as atmospherics and visuals). In general, the results obtained are very encouraging compared to previous studies., European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Multilayered balanced wideband bandpass filter with high filtering selectivity

  • Yang, Li|||0000-0002-1264-4810
  • Gómez García, Roberto|||0000-0001-9132-6927
2021 IEEE MTT-S International Microwave Filter Workshop (IMFW), 17-19 Nov. 2021, Peruggia, Italy., A type of multilayered balanced wideband bandpass filter (BPF) with high filtering selectivity is presented. It is composed of two back-to-back cascaded microstrip-tomicrostrip vertical transitions using slotline stepped-impedance resonators (SIRs). Under differential-mode excitation, a sharprejection fifth-order wideband filtering transfer function with two paired close-to-passband transmission zeros can be attained in the proposed balanced BPF. Moreover, high common-mode suppression levels within the differential-mode passband range are achieved. For experimental-demonstration purposes, a microstrip prototype of the devised balanced wideband BPF architecture is developed and tested. It exhibits a measured differential-mode fifth-order high-selectivity wideband filtering response with center frequency of 4.015 GHz, 3-dB fractional bandwidth of 38.06%, and minimum in-band power-insertionloss level of 0.947 dB. The common-mode suppression levels are above 20 dB from 2.075 to 5.588 GHz., European Commission, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Optimisation-based design of transversal signal-interference microwave bandpass and lowpass filters with extended stopband

  • Gómez García, Roberto|||0000-0001-9132-6927
  • Yang, Li|||0000-0002-1264-4810
  • Muñoz Ferreras, José María|||0000-0003-1929-3934
Generalised bi-path stepped-impedance-line signal-interference bandpass and lowpass transversal filtering sections (TFSs) with increased stopband bandwidth above the main transmission band are presented. They are realised by partitioning the two in-parallel transmission-line paths in their related classic spectrally periodic TFS approach into a plurality of line sub-segments, whose characteristic-impedance and electrical-length values are derived through optimisation. It is demonstrated that the stopband range above the transmission band in these generalised non-frequency-periodic TFSs can be remarkably broadened with regard to those intrinsic to their conventional bandpass and lowpass TFS counterparts. Furthermore, as added benefits, this is achieved for shorter transmission-line paths and a sharper cut-off slope between the transmission band and the extended stopband. For experimental-validation purposes, three proof-of-concept microstrip prototypes are manufactured and characterised. They correspond to a 1-GHz bandpass TFS, a 1-GHz two-TFS-in-series-cascade-based bandpass filter (BPF) with augmented selectivity and out-of-band power-rejection levels, and one lowpass TFS with a designed 3-dB cut-off frequency of 1.25 GHz., Agencia Estatal de Investigación, European Commission
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

Two-layered microstrip diplexer based on high-selectivity wideband bandpass filters

  • Yang, Li|||0000-0002-1264-4810
  • Gómez García, Roberto|||0000-0001-9132-6927
2022 IEEE Radio and Wireless Symposium (RWS), 16-19 Jan. 2022, Las Vegas, NV, USA., This paper presents a microstrip diplexer based on two high-selectivity wideband bandpass filters (BPFs) in a twolayered structure. Both the lower and upper channels are designed with third-order microstrip-to-microstrip vertical transitions using open-circuit-ended slotline stepped-impedance resonators (SIRs). Specifically, open-circuit-ended microstrip lines on the top and bottom layers for the lower channel are employed, whereas the upper channel is equipped with short-circuit-ended ones. Thus, owing to the slotline SIRs, two close-to-passband transmission zeros (TZs) leading to sharp-rejection capabilities for both BPF channels are attained. The theoretical foundations and RF operating principles of the devised diplexer are discussed in detail. For practical-validation purposes, a two-layered microstrip wideband diplexer prototype is designed, simulated, and tested. It features two three-pole high-selectivity filtering responses for the measured lower and upper channels that are centered at 1.52 GHz and 2.76 GHz, and exhibit 3-dB fractional bandwidths of 60% and 24.93%, respectively., European Commission, Agencia Estatal de Investigación
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Contribución de congreso (ConferenceOutput)

CMRNet: camera to LiDAR-map registration

  • Cattaneo, Daniele
  • Vaghi, Matteo
  • Ballardini, Augusto Luis|||0000-0001-6688-5081
  • Fontana, Simone
  • Sorrenti, Domenico Giorgio
  • Burgard, Wolfram
IEEE Conference on Intelligent Transportation Systems - ITSC 2019, 27-30/10/2019, Auckland, Nueva Zelanda., In this paper we present CMRNet, a realtime approach based on a Convolutional Neural Network (CNN) to localize an RGB image of a scene in a map built from LiDAR data. Our network is not trained in the working area, i. e., CMRNet does not learn the map. Instead it learns to match an image to the map. We validate our approach on the KITTI dataset, processing each frame independently without any tracking procedure. CMRNet achieves 0.27m and 1.07° median localization accuracy on the sequence 00 of the odometry dataset, starting from a rough pose estimate displaced up to 3.5m and 17°. To the best of our knowledge this is the first CNN-based approach that learns to match images from a monocular camera to a given, preexisting 3D LiDAR-map., European Commission