Pasar al contenido principal

SEPARACION Y (FOTO)DEGRADACION COMBINADA DE CONTAMINANTES EN AGUA UTILIZANDO DISPOSITIVOS BASADOS EN REDES METAL-ORGANICAS POROSAS

PID2019-104228RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACION IMDEA ENERGIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robust hybrid bismuth perovskites as potential photocatalysts for overall water splitting

  • Chacón-García, Antonio J.
  • Babaryk, Artem A.
  • Rodríguez-Diéguez, Antonio
  • Pérez, Yolanda
  • Horcajada, Patricia
  • Garcia-Baldovi, Hermenegildo
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Organic-inorganic hybrid perovskites have gained great attention as promising photocatalysts for hydrogen generation. However, due to their poor stability in water, the use of aqueous hydrohalic acid solutions is specifically required for an efficient hydrogen evolution. Herein, three novel photoactive lead-free hybrid perovskites based on bismuth and triazolium cations (denoted as IEF-15, IEF-16, and IEF-17 (IEF stands for IMDEA energy frameworks)) were synthesized and fully characterized (structural, compositional, optical, etc.). Further, these solids were proposed as photocatalysts for the challenging gas phase overall water splitting (OWS) reaction. Accordingly, IEF-16 thin films exhibited a remarkable photocatalytic activity in both H-2 and O-2 evolution, as a consequence of its appropriate bandgap and energy-band alignment, achieving hydrogen evolution rates of 846 and 360 mu mol center dot gH(2)(-1) after 24 h under ultraviolet-visible (UV-vis) irradiation or simulated solar irradiation, respectively. This study additionally highlights the remarkable structural and photochemical stability of IEF-16 under different operational conditions (i.e. water volume, irradiation and temperature), paving the way for green hydrogen production from OWS using perovskite-based photocatalysts., A. J. C.-G.; Y. P.; and P. H. acknowledge the National MICIU project Retos "MOFieidon" (No. PID2019-104228RB-I00), Strategic Projects Oriented to Ecological Transition and Digital Transition "H2-MOF" (No. TED2021-132092B-C21) and MADRID-PV2-CM/ EMT-4308 project from Comunidad de Madrid. S.N. thanks the support of grant (No. PID2021-123856MBI00) funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nickel phosphonate MOF as efficient water splitting photocatalyst

  • Salcedo-Abraira, Pablo
  • Vilela, Sérgio M. F.
  • Babaryk, Artem A.
  • Salles, Fabrice
  • Horcajada, Patricia
  • Cabrero-Antonino, Maria
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Ponce Gregorio, Pedro|||0000-0002-9548-767X
[EN] A novel microporous two-dimensional (2D) Ni-based phosphonate metal-organic framework (MOF; denoted as IEF-13) has been successfully synthesized by a simple and green hydrothermal method and fully characterized using a combination of experimental and computational techniques. Structure resolution by single-crystal X-ray diffraction reveals that IEF-13 crystallizes in the triclinic space group P-i having bi-octahedra nickel nodes and a photo/electroactive tritopic phosphonate ligand. Remarkably, this material exhibits coordinatively unsaturated nickel(II) sites, free-PO3H2 and-PO3H acidic groups, a CO2 accessible microporosity, and an exceptional thermal and chemical stability. Further, its in-deep optoelectronic characterization evidences a photoresponse suitable for photocatalysis. In this sense, the photocatalytic activity for challenging H-2 generation and overall water splitting in absence of any co-catalyst using UV-Vis irradiation and simulated sunlight has been evaluated, constituting the first report for a phosphonate-MOF photocatalyst. IEF-13 is able to produce up to 2,200 mu mol of H-2 per gram using methanol as sacrificial agent, exhibiting stability, maintaining its crystal structure and allowing its recycling. Even more, 170 mu mol of H-2 per gram were produced using IEF-13 as photocatalyst in the absence of any co-catalyst for the overall water splitting, being this reaction limited by the O-2 reduction. The present work opens new avenues for further optimization of the photocatalytic activity in this type of multifunctional materials., This work was supported by MOFseidon project (Retos project, PID2019-104228RB-I00, MICIU-AEI/FEDER, UE), and the Ramon Areces Foundation project H+MOFs. P. H. acknowledges the Spanish Ramon y Cajal Programme (2014-15039). S. N. thanks financial support by the Fundacion Ramon Areces (XVIII Concurso Nacional para la Adjudicacion de Ayudas a la Investigation en Ciencias de la Vida y de la Materia, 2016), Ministerio de Ciencia, Innovation y Universidades RTI2018-099482-A-I00 project and Generalitat Valenciana grupos de investigacion consolidables 2019 (AICO/2019/214) project and Agencia Valenciana de la Innovacio (AVI, INNEST/2020/111) project. H. G. thanks financial support to the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-098237-CO21) and Generalitat Valenciana (Prometeo2017/083). In memory of our dear colleague, Prof. Emilio Moran, who recently passed away.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Novel Porous Ti-Squarate as Efficient Photocatalyst in the Overall Water Splitting Reaction under Simulated Sunlight Irradiation

  • Salcedo-Abraira, Pablo
  • Babaryk, Artem A.
  • Montero-Lanzuela, Eva
  • Contreras Almengor, Oscar R.
  • Cabrero-Antonino, Maria
  • Svensson, Erik
  • Willhammar, Tom
  • Elkäim, Erik
  • Horcajada, Patricia
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] A new porous titanium(IV) squarate metal¿organic framework (MOF), denoted as IEF-11, having a never reported titanium secondary building unit, is successfully synthesized and fully characterized. IEF-11 not only exhibits a permanent porosity but also an outstanding chemical stability. Further, as a consequence of combining the photoactive Ti(IV) and the electroactive squarate, IEF-11 presents relevant optoelectronic properties, applied here to the photocatalytic overall water splitting reaction. Remarkably, IEF-11 as a photocatalyst is able to produce record H2 amounts for MOF-based materials under simulated sunlight (up to 672 µmol gcatalyst in 22 h) without any activity loss during at least 10 d., P.S.-A. and A.A.B. contributed equally to this work. The authors acknowledge the Ramón Areces Foundation project H+MOFs, the M-ERA-NET C-MOF-cell (grant PCI2020-111998 funded by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/ PRTR) project, and Retos Investigación MOFSEIDON (grant PID2019-104228RB-I00 funded by MCIN/AEI/10.13039/501100011033) project. S.N. thanks financial support by Ministerio de Ciencia, Innovatión y Universidades RTI2018-099482-A-I00 project and Agència Valenciana de la Innovació (AVI, INNEST/2020/111) project. H.G. thanks financial support to the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-098237-CO21) and Generalitat Valenciana (Prometeo2017/083). T.W. acknowledges financial support from the Swedish Research Council (VR, 2019-05465). Parts of this research were carried out at ¿CRISTAL¿ at SOLEIL. P.S. and A.A.B. sincerely thank to the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020 for the support of the synchrotron experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Two Cu-Based Phosphonate Metal-Organic Frameworks as Efficient Water-Splitting Photocatalysts

  • Salcedo-Abraira, Pablo
  • Serrano Nieto, Rubén
  • Biglione, Catalina
  • Vilela, Sérgio M.F.
  • Babaryk, Artem A.
  • Tilve-Martínez, David
  • Rodriguez-Diéguez, Antonio
  • Horcajada, Patricia
  • Cabrero-Antonino, Maria
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Two novel three-dimensional metal-organic frameworks(MOFs)based on the photoactive pyrene tetraphosphonate ligand and copper(denoted as IEF-8 and IEF-9) have been hydrothermally synthesizedand fully characterized (XRD, FTIR, TGA, SEM, XPS, etc.). Their crystalstructures were unveiled by single-crystal X-ray diffraction. Remarkably,these materials exhibit coordinatively unsaturated copper (II) sites,free -PO3H2 and -PO3H acidic groups, and good thermal and chemical stability. Further,their optoelectronic characterization evidenced a photoresponse suitablefor photocatalysis. In this sense, the photocatalytic activity ofpyrene phosphonate MOFs was evaluated for the first time for the challenginghydrogen evolution reaction. In particular, IEF-8 exhibited a catalyticefficiency higher than that of the benchmarked Ti carboxylate photocatalystMIL-125-(Ti)-NH2, producing 1800 mu mol center dot g(-1) after 22 h under UV-vis irradiation in theabsence of any co-catalyst. Furthermore, this material presented goodreusability (at least up to 4 cycles), preserving its activity andstructural integrity., The authors acknowledge the Maria de Maeztu IMDEA Energy Institute, the M-ERA-NET C-MOF-cell project, the Retos Investigacion MOFSEIDON project (PID2019-104228RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union, MICIU-AEI/FEDER, UE), and the H2-MOF project (TED2021-132092B-C21 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR). They thank "Comunidad de Madrid" and European Regional Development Fund-FEDER 2014-2020-OE REACT-UE 1for their financial support to the VIRMOF-CM project associated to R & D projects in response to COVID-19. S.N. thanks the support of grant PID2021-123856OBI00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fully supercritical CO2 preparation of a nanostructured MOF composite with application in cutaneous drug delivery

  • Kubovics, Márta
  • Rojas, Sara
  • López Periago, Ana M.
  • Fraile, Julio
  • Horcajada, Patricia
  • Domingo Pascual, M. Concepción
Supercritical CO2 (scCO2) technology is used here as an efficient method to assist in the preparation of a cutaneous polymeric formulation based on drug containing metal-organic framework composites. The supercritical fluid is used in three steps: (i) as a drying agent for the nanosized mesoporous matrix, (ii) as the impregnation vector of a topical antibiotic drug, and (iii) as a plasticizing and foaming fluid to obtain dispersions of the hybrid material into a biocompatible polymer, e.g., the macroporous patch. The materials were characterized using solid state techniques. The drug delivery and permeation profiles of the patches were investigated applying in vitro and ex vivo tests by using porcine skin. These analyses suggest that scCO2 impregnation is an easy and fast strategy to prepare composite devices able to progressively release and diffuse the incorporated drug throughout the skin, paving the way to efficiently prepare cutaneous devices for topical or systemic therapies., This work was supported by the Spanish Ministry of Science and Innovation MICINN through the Severo Ochoa Program for Centers of Excellence (CEX2019–000917-S) and the Spanish National Plan of Research with projects CTQ2017–83632 and PID2020–115631GB-I00 (Concepción Domingo, Ana M. López and Márta Kubovics). Sara Rojas and Patricia Horcajada acknowledge the regional Madrid founding (Talento 2017 Modality 2, 2017-T2/IND-5149), the MOFSEIDON project (PID2019–104228RB-I00, MCI/AEI/FEDER, UE), and the Multifunctional Metallodrugs in Diagnosis and Therapy Network (MICIU, RED2018–102471-T). Márta Kubovics acknowledge the financial support from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie Cofund grant (agreement no MSCA-COFUND-DP/0320–754397). Patricia Horcajada acknowledges the Spanish Ramon y Cajal Programme (grant agreement no. 2014–16823). Sara Rojas acknowledges the Spanish Juan de la Cierva Incorporación Fellowship (grant agreement no. IJC2019–038894-I). This work has been done in the framework of the doctoral program “Chemistry” of the Universitat Autònoma de Barcelona by Márta Kubovics., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Novel Porous Ti-Squarate as Efficient Photocatalyst in the Overall Water Splitting Reaction under Simulated Sunlight Irradiation

  • Salcedo-Abraira, Pablo
  • Babaryk, Artem A.
  • Montero-Lanzuela, E.
  • Contreras Almengor, O.R
  • Cabrero-Antonino, María
  • Grape, Erik Svensson
  • Willhammar, Tom
  • Navalón, Sergio
  • Elkaim, Erik
  • García Gómez, Hermenegildo
  • Horcajada, Patricia
A new porous titanium(IV) squarate metal–organic framework (MOF), denoted as IEF-11, having a never reported titanium secondary building unit, is successfully synthesized and fully characterized. IEF-11 not only exhibits a permanent porosity but also an outstanding chemical stability. Further, as a consequence of combining the photoactive Ti(IV) and the electroactive squarate, IEF-11 presents relevant optoelectronic properties, applied here to the photocatalytic overall water splitting reaction. Remarkably, IEF-11 as a photocatalyst is able to produce record H amounts for MOF-based materials under simulated sunlight (up to 672 µmol g in 22 h) without any activity loss during at least 10 d., P.S.-A. and A.A.B. contributed equally to this work. The authors acknowledge the Ramón Areces Foundation project H+MOFs, the M-ERA-NET C-MOF-cell (grant PCI2020-111998 funded by MCIN/AEI /10.13039/501100011033 and European Union NextGenerationEU/PRTR) project, and Retos Investigación MOFSEIDON (grant PID2019-104228RB-I00 funded by MCIN/AEI/10.13039/501100011033) project. S.N. thanks financial support by Ministerio de Ciencia, Innovatión y Universidades RTI2018-099482-A-I00 project and Agència Valenciana de la Innovació (AVI, INNEST/2020/111) project. H.G. thanks financial support to the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-098237-CO21) and Generalitat Valenciana (Prometeo2017/083). T.W. acknowledges financial support from the Swedish Research Council (VR, 2019-05465). Parts of this research were carried out at “CRISTAL” at SOLEIL. P.S. and A.A.B. sincerely thank to the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020 for the support of the synchrotron experiment.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly Aligned Bacterial Nanocellulose Films Obtained During Static Biosynthesis in a Reproducible and Straightforward Approach

  • Murugarren, Nerea
  • Roig Sánchez, Soledad 
  • Anton Sales, Irene
  • Malandain, Nanthilde
  • Xu, Kai
  • Solano, Eduardo
  • Reparaz, J. Sebastian
  • Laromaine, Anna
Bacterial nanocellulose (BNC) is usually produced as randomly-organized highly pure cellulose nanofibers films. Its high water-holding capacity, porosity, mechanical strength, and biocompatibility make it unique. Ordered structures are found in nature and the properties appearing upon aligning polymers fibers inspire everyone to achieve highly aligned BNC (A-BNC) films. This work takes advantage of natural bacteria biosynthesis in a reproducible and straightforward approach. Bacteria confined and statically incubated biosynthesized BNC nanofibers in a single direction without entanglement. The obtained film is highly oriented within the total volume confirmed by polarization-resolved second-harmonic generation signal and Small Angle X-ray Scattering. The biosynthesis approach is improved by reusing the bacterial substrates to obtain A-BNC reproducibly and repeatedly. The suitability of A-BNC as cell carriers is confirmed by adhering to and growing fibroblasts in the substrate. Finally, the thermal conductivity is evaluated by two independent approaches, i.e., using the well-known 3ω-method and a recently developed contactless thermoreflectance approach, confirming a thermal conductivity of 1.63 W mK-1 in the direction of the aligned fibers versus 0.3 W mK-1 perpendicularly. The fivefold increase in thermal conductivity of BNC in the alignment direction forecasts the potential of BNC-based devices outperforming some other natural polymer and synthetic materials., Authors acknowledge the critical reading of Prof. Anna Roig, and the discussions of Dr. Martí Gich and Dr. Mariano Campoy. The also acknowledge the funding from: RTI2018-096273-B-I00 and PID2021-122645O-BI00 funded by MCIN/AEI//10.13039/501100011033/FEDER “Una manera de hacer Europa,” PID2019-104228RB-I00 funded by MCIN/AEI/10.13039/501100011033, the Generalitat de Catalunya (2017SGR765), the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496 and CEX2019-000917-S (FUNFUTURE)), and Grant No. PID2020-119777GB-I00 (THERM2MAIN). SAXS experiments were performed at NCD-SWEET beamline at ALBA synchrotron (Cerdanyola del Vallès, Spain) with the collaboration of ALBA staff. PSHG imaging was performed at the SLN Research Facility, Dr. Pablo Loza-Alvarez, Institute of Photonic Sciences (ICFO) (Castelldefells, Spain). Cell culture was performed at the Cell Culture facility of the University Autonomous of Barcelona (SCAC-UAB). The authors acknowledge the use of Biorender.com. Nanthilde Malandain (Ph.D. scholarship PRE2019-089754) is enrolled in the Ph.D. program of Biotechnology of the UAB., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hf/porphyrin-based metal-organic framework PCN-224 for CO2 cycloaddition with epoxides

  • Carrasco, Sergio
  • Orcajo, Gisela
  • Martínez, Fernando
  • Imaz, Inhar
  • Kavak, Safiyye
  • Arenas Esteban, Daniel
  • Maspoch, Daniel
  • Bals, Sara
  • Calleja, Guillermo
  • Horcajada, Patricia
Herein, we describe for the first time the synthesis of the highly porous Hf-tetracarboxylate porphyrin-based metal-organic framework (MOF) (Hf)PCN-224(M) (M = H2, Co2+). (Hf)PCN-224(H2) was easily and efficiently prepared following a simple microwave-assisted procedure with good yields (56–67%; space-time yields: 1100–1270 kg m−3·day−1), high crystallinity and phase purity by using trifluoromethanesulfonic acid and benzoic acid as modulators in less than 30 min. By simply introducing a preliminary step (10 min), 5,10,15,20-(tetra-4-carboxyphenyl)porphyrin linker (TCPP) was quantitatively metalated with Co2+ without additional purification and/or time consuming protection/deprotection steps to further obtain (Hf)PCN-224(Co). (Hf)PCN-224(Co) was then tested as catalyst in CO2 cycloaddition reaction with different epoxides to yield cyclic carbonates, showing the best catalytic performance described to date compared to other PCNs, under mild conditions (1 bar CO2, room temperature, 18–24 h). Twelve epoxides were tested, obtaining from moderate to excellent conversions (35–96%). Moreover, this reaction was gram scaled-up (x50) without significant loss of yield to cyclic carbonates. (Hf)PCN-224(Co) maintained its integrity and crystallinity even after 8 consecutive runs, and poisoning was efficiently reverted by a simple thermal treatment (175 °C, 6 h), fully recovering the initial catalytic activity., H2020-MSCA-COFUND GOT Energy Talent (ref. 754382), “Comunidad de Madrid” and European Regional Development Fund-FEDER 2014-2020-OE REACT-UE 1 for their financial support to VIRMOF-CM project associated to R&D projects in response to COVID-19, H2020-MSCA-ITN-2019 HeatNMof (ref. 860942), M-ERA-NET C-MOF-cell (grant PCI2020-111998 funded by MCIN/AEI /10.13039/501100011033 and European Union NextGenerationEU/PRTR), Retos Investigación MOFSEIDON (grant PID2019-104228RB-I00 funded by MCIN/AEI/10.13039/501100011033)., This work has been also supported by the Regional Government of Madrid (Project ACES2030-CM, S2018/EMT-4319) and the Universidad Rey Juan Carlos IMPULSO Project (grant MATER M − 3000)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust hybrid bismuth perovskites as potential photocatalysts for overall water splitting

  • Chacón-García, Antonio J.
  • Baldoví, Herme G.
  • Babaryk, Artem A.
  • Rodríguez-Diéguez, Antonio
  • Navalón, Sergio
  • Pérez, Yolanda
  • García Gómez, Hermenegildo
  • Horcajada, Patricia
Organic–inorganic hybrid perovskites have gained great attention as promising photocatalysts for hydrogen generation. However, due to their poor stability in water, the use of aqueous hydrohalic acid solutions is specifically required for an efficient hydrogen evolution. Herein, three novel photoactive lead-free hybrid perovskites based on bismuth and triazolium cations (denoted as IEF-15, IEF-16, and IEF-17 (IEF stands for IMDEA energy frameworks)) were synthesized and fully characterized (structural, compositional, optical, etc.). Further, these solids were proposed as photocatalysts for the challenging gas phase overall water splitting (OWS) reaction. Accordingly, IEF-16 thin films exhibited a remarkable photocatalytic activity in both H and O evolution, as a consequence of its appropriate bandgap and energy-band alignment, achieving hydrogen evolution rates of 846 and 360μmol⋅g after 24 h under ultraviolet–visible (UV–vis) irradiation or simulated solar irradiation, respectively. This study additionally highlights the remarkable structural and photochemical stability of IEF-16 under different operational conditions (i.e. water volume, irradiation and temperature), paving the way for green hydrogen production from OWS using perovskite-based photocatalysts., A. J. C.-G.; Y. P.; and P. H. acknowledge the National MICIU project Retos “MOFieidon” (No. PID2019-104228RB-I00), Strategic Projects Oriented to Ecological Transition and Digital Transition “H2-MOF” (No. TED2021-132092B-C21) and MADRID-PV2-CM/ EMT-4308 project from Comunidad de Madrid. S.N. thanks the support of grant (No. PID2021-123856MBI00) funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Ultrafast Reproducible Synthesis of a Ag-nanocluster@MOF Composite and its Superior Visible-Photocatalytic Activity in Batch and in Continuous Flow

  • Arenas Vivo, Ana
  • Rojas, Sara
  • Ocaña, Iván
  • Torres, Ana
  • Liras, Marta
  • Salles, Fabrice
  • Arenas Esteban, Daniel
  • Bals, Sara
  • Ávila Brande, David
  • Horcajada, Patricia
The (photo)catalytic properties of metal–organic frameworks (MOFs) can be enhanced by post-synthetic inclusion of metallic species in their porosity. Due to their extraordinarily high surface area and well defined porous structure, MOFs can be used for the stabilization of metal nanoparticles with adjustable size within their porosity. Originally, we present here an optimized ultrafast photoreduction protocol for the in situ synthesis of tiny and monodisperse silver nanoclusters (AgNCs) homogeneously supported on a photoactive porous titanium carboxylate MIL-125-NH2 MOF. The strong metal–framework interaction between –NH2 and Ag atoms influences the AgNC growth, leading to the surfactant-free efficient catalyst AgNC@MIL-125-NH2 with improved visible light absorption. The potential use of AgNC@MIL-125-NH2 was further tested in challenging applications: (i) the photodegradation of the emerging organic contaminants (EOCs) methylene blue (MB-dye) and sulfamethazine (SMT-antibiotic) in water treatment, and (ii) the catalytic hydrogenation of p-nitroaniline (4-NA) to p-phenylenediamine (PPD) with industrial interest. It is noteworthy that compared with the pristine MIL-125-NH2, the composite presents an improved catalytic activity and stability, being able to photodegrade 92% of MB in 60 min and 96% of SMT in 30 min, and transform 100% of 4-NA to PPD in 30 min. Aside from these very good results, this study describes for the first time the use of a MOF in a visible light continuous flow reactor for wastewater treatment. With only 10 mg of AgNC@MIL-125-NH2, high SMT removal efficiency over 70% is maintained after >2 h under water flow conditions found in real wastewater treatment plants, signaling a future real application of MOFs in water remediation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly Aligned Bacterial Nanocellulose Films Obtained During Static Biosynthesis in a Reproducible and Straightforward Approach

  • Murugarren, Nerea|||0000-0003-0251-4358
  • Roig-Sanchez, Soledad|||0000-0002-7474-3769
  • Anton-Sales, Irene|||0000-0003-3511-2574
  • Malandain, Nanthilde|||0000-0001-6447-2726
  • Xu, Kai|||0000-0001-6999-1904
  • Solano, Eduardo|||0000-0002-2348-2271
  • Reparaz, Juan Sebastian
  • Laromaine, Anna|||0000-0002-4764-0780
Bacterial nanocellulose (BNC) is usually produced as randomly-organized highly pure cellulose nanofibers films. Its high water-holding capacity, porosity, mechanical strength, and biocompatibility make it unique. Ordered structures are found in nature and the properties appearing upon aligning polymers fibers inspire everyone to achieve highly aligned BNC (A-BNC) films. This work takes advantage of natural bacteria biosynthesis in a reproducible and straightforward approach. Bacteria confined and statically incubated biosynthesized BNC nanofibers in a single direction without entanglement. The obtained film is highly oriented within the total volume confirmed by polarization-resolved second-harmonic generation signal and Small Angle X-ray Scattering. The biosynthesis approach is improved by reusing the bacterial substrates to obtain A-BNC reproducibly and repeatedly. The suitability of A-BNC as cell carriers is confirmed by adhering to and growing fibroblasts in the substrate. Finally, the thermal conductivity is evaluated by two independent approaches, i.e., using the well-known 3 ω -method and a recently developed contactless thermoreflectance approach, confirming a thermal conductivity of 1.63 W mK -1 in the direction of the aligned fibers versus 0.3 W mK -1 perpendicularly. The fivefold increase in thermal conductivity of BNC in the alignment direction forecasts the potential of BNC-based devices outperforming some other natural polymer and synthetic materials. Bacteria confined and statically incubated for a few days biosynthesized bacterial nanocellulose (BNC) nanofibers in a single direction without entanglement. The obtained film is highly oriented within the total volume of the film, and it shows a five-fold increase in thermal conductivity in the parallel direction forecasting the potential of BNC-based devices outperforming some other natural polymer and synthetic materials.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Hf/porphyrin-based metal-organic framework PCN-224 for CO2 cycloaddition with epoxides

  • Carrasco, Sergio|||0000-0003-0024-1392
  • Orcajo, Gisela
  • Martínez Castillejo, Fernando
  • Imaz, Inhar|||0000-0002-0278-1141
  • Kavak, Safiyye
  • Arenas Esteban, Daniel|||0000-0002-5626-9848
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Bals, Sara|||0000-0002-4249-8017
  • Calleja, Guillermo
  • Horcajada, Patricia|||0000-0002-6544-5911
Herein, we describe for the first time the synthesis of the highly porous Hf-tetracarboxylate porphyrin-based metal-organic framework (MOF) (Hf)PCN-224(M) (M = H, Co). (Hf)PCN-224(H) was easily and efficiently prepared following a simple microwave-assisted procedure with good yields (56-67%; space-time yields: 1100-1270 kg m·day), high crystallinity and phase purity by using trifluoromethanesulfonic acid and benzoic acid as modulators in less than 30 min. By simply introducing a preliminary step (10 min), 5,10,15,20-(tetra-4-carboxyphenyl)porphyrin linker (TCPP) was quantitatively metalated with Co without additional purification and/or time consuming protection/deprotection steps to further obtain (Hf)PCN-224(Co). (Hf)PCN-224(Co) was then tested as catalyst in CO cycloaddition reaction with different epoxides to yield cyclic carbonates, showing the best catalytic performance described to date compared to other PCNs, under mild conditions (1 bar CO, room temperature, 18-24 h). Twelve epoxides were tested, obtaining from moderate to excellent conversions (35-96%). Moreover, this reaction was gram scaled-up (x50) without significant loss of yield to cyclic carbonates. (Hf)PCN-224(Co) maintained its integrity and crystallinity even after 8 consecutive runs, and poisoning was efficiently reverted by a simple thermal treatment (175 °C, 6 h), fully recovering the initial catalytic activity.