Pasar al contenido principal

FOTOCATALIZADORES MULTIFUNCIONALES BASADOS EN MATERIALES HIBRIDOS METAL-ORGANICO PARA LA REDUCCION SELECTIVA DE CO2 IMPULSADA POR LA ENERGIA SOLAR A COMBUSTIBLES Y PRODUCTOS

PID2021-123856OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 52
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Unveiling the mechanism of ozone activation in water via singlet oxygen over cyclodextrin derived graphitic carbocatalysts

  • López-Francés, Antón
  • García-Mulero, Ana
  • Accardo, Emanuela
  • Ferrer, Belén|||0000-0002-9703-9045
  • Franconetti, Antonio|||0000-0002-7972-8795
  • Primo, Ana|||0000-0001-9205-2278
  • Dhakshinamoorthy, Amarajothi|||0000-0003-0991-6608
  • Navalón, Sergio|||0000-0001-8423-0759
  • García, Hermenegildo|||0000-0002-9664-493X
Metal-free heterogeneous ozonation catalysis is recognized as a promising technology for water decontamination. Herein, we report the development of cyclodextrin (CD) derived graphitic (G) carbons through pyrolysis of α-, β- and γ-CDs under Ar atmosphere with fine-tuned activity as ozonation carbocatalysts for the degradation of oxalic acid in water. The G carbon obtained from α-CD showed the highest activity compared to its analogous solids under similar conditions. This solid was reused several times with a slight decrease in its activity, but after deactivation the performance of the fresh material can be restored in a large extent by a thermal pyrolysis treatment. Selective quenching experiments and electron spin resonance measurements with trapping agents revealed that O3 is transformed by interaction with G into 1O2 that becomes the active species. Experimental and computational evidence indicated that 1O2 reacts with the graphitic domains of Gs via endoperoxide intermediate that is the responsible species for oxalic acid degradation. These novel findings underscore the unforeseen importance of carbocatalytic O3 transformation into 1O2 species that further react with graphitic domains of the carbocatalyst leading to the formation of endoperoxide intermediate that is a bis oxyl radical precursor responsible for oxalic acid degradation.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solar-assisted photocatalytic water splitting using defective UiO-66 solids from modulated synthesis

  • Rueda-Navarro, Celia Maria|||0000-0002-9569-7722
  • Cabrero-Antonino, Maria
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Ferrer Ribera, Rosa Belén
  • Vayá Pérez, Ignacio|||0000-0003-1682-9342
  • Garcia-Baldovi, Hermenegildo
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Escamilla, Paula
  • Díez-Cabanes, Valentín
  • Fan, Dong
  • Maurin, Guillaume
[EN] Metal-organic frameworks (MOFs) are attracting increasing interests as photocatalysts for solar-driven hydrogen production from water. This paper reports on a comparative study of using either acetic acid (AA) or trifluoroacetic acid (TFA) as the representative UiO-66 organic modulators for synthesizing visible light responsive UiO-66(Zr)-X (X: NH2 or NO2) photocatalysts for water splitting. The results show that photocatalytic hydrogen generation from a water/methanol mixture can be improved by varying the nature and amount of the modulator employed to prepare the different UiO-66(Zr)-X (X: NH2 or NO2) solid derivatives. UiO-66(Zr)-NH2 was the most active photocatalyst, followed by UiO-66(Zr)-NO2, both prepared with 12 equivalents of AA with respect to the organic ligand. This UiO-66(Zr)-NH2 solid was more active than the parent MOF in photocatalytic overall water splitting (OWS) (H-2 and O-2 production of 450 and 160 mu mol.g(-1), respectively, in 5 h; apparent quantum yield (AQY) at 400 nm of 0.06%) in the absence of methanol and compares favourably with analogous reports. Information on the photocatalytic activity of the most active solids of both series was obtained by means of a series of techniques, including ultraviolet-visible (UV-vis) diffuse reflectance, X-ray photoelectron spectroscopy (XPS), laser flash photolysis (LFP), electron spin resonance (ESR), photoluminescence and photoelectrochemical measurements together with density functional theory (DFT) calculations. The results showed that organic acid modulators can be used to enhance the photocatalytic activity of missing linker UiO-66 defective materials in solar-powered water splitting., C. M. R. thanks the support of PRE2019-089877 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. V. D-C. is grateful to the European Union's Horizon 2020 Research and Innovation Program project MOF2H2 (GA No. 101084131) for the financial support. Computational ressources were provided by the Centre informatique national de l'enseignement superieur (CINES) Supercomputing facilities and the local ICGM clusters. I. V. thanks the support of grant PID2020-115010RB-I00 funded by MCIN/AEI/10.13039/501100011033. S. N. thanks the support of grant PID2021-123856OBI00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Porphyrin-Based MOF Thin Film on Transparent Conducting Oxide: Investigation of Growth, Porosity and Photoelectrochemical Properties

  • Gikonyo, Ben
  • Liu, Fangbing
  • Hawila, Saly
  • Demessence, Aude
  • Marichy, Catherine
  • Fateeva, Alexandra
  • Garcia-Baldovi, Hermenegildo
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] Synthesizing metal-organic frameworks (MOFs) composites with a controlled morphology is an important requirement to access materials of desired patterning and composition. Since the last decade, MOF growth from sacrificial metal oxide layer is increasingly developed as it represents an efficient pathway to functionalize a large number of substrates. In this study, porphyrin-based Al-PMOF thin films were grown on conductive transparent oxide substrates from sacrificial layers of ALD-deposited alumina oxide. The control of the solvent composition and the number of atomic layer deposition (ALD) cycles allow us to tune the crystallinity, morphology and thickness of the produced thin films. Photophysical studies evidence that Al-PMOF thin films present light absorption and emission properties governed by the porphyrinic linker, without any quenching upon increasing the film thickness. Al-PMOF thin films obtained through this methodology present a remarkably high optical quality both in terms of transparency and coverage. The porosity of the samples is demonstrated by ellipsometry and used for Zn(II) insertion inside the MOF thin film. The multifunctional transparent, porous and luminescent thin film grown on fluorine-doped tin oxide (FTO) is used as an electrode capable of photoinduced charge separation upon simulated sunlight irradiation., This research was funded by the French National Research Agency grant (ANR-17-CE09- 0029-01 and ANR-10-LABX-0064), and the Region Auvergne Rhone Alpes for the Subvention SCUSI. The authors thank the French Ministry of National Education, Research and Technology, the University Lyon 1 and the CNRS for financial support. S.N. thanks the support of grant PID2021-123856OBI00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Valorization of Field-Spent Granular Activated Carbon as Heterogeneous Ozonation Catalyst for Water Treatment

  • López-Francés, Antón|||0000-0002-1639-592X
  • Cabrero-Antonino, Maria
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Bernat-Quesada, Francisco
  • Ferrer, Belén
  • Blanes, María
  • García, Rafael
  • Almenar, Pura
  • Baldovi, Herme G.
[EN] Developing sustainable cost-effective strategies for valorization of field-spent granular activated carbon (s-GAC) from industrial water treatment has gained much interest. Here, we report a cost-effective strategy for the regeneration of s-GAC as an adsorbent in a large-scale drinking water treatment plant and used as an efficient and durable ozonation catalyst in water. To achieve this, a series of samples is prepared by subjecting s-GAC to thermally controlled combustion treatments with and without pyrolysis. The catalytic performance of the optimized sample is evaluated for oxalic acid degradation as the model pollutant under batch (>15 h) and continuous flow operations (>200 h). The partially deactivated catalyst upon reuse is restored by thermal treatment. Electron paramagnetic resonance and selective quenching experiments show the formation of singlet oxygen (O-1(2)) during catalytic ozonation. The GAC-ozonation catalyst is efficient to minimize the formation of chlorinated disinfection by-products like trihalomethanes and haloacetic acids in an urban wastewater effluent., A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, Next Generation EU). HG thanks the financial support by the Health Research Institute of the Balearic Islands (grant COVID-19/25) by the Regional Ministry of European funds and Generalitat Valencia project (AICO/2019/21421). H.G. thanks to Ayuda RYC2022-037287-I financiada por MCIN/AEI /10.13039/501100011033 y por El FSE invierte en tu future. S.N. thanks financial support by Agencia Valenciana de la Innovacio (AVI, INNEST/2020/111) project and is also grateful from Grant PID2021-123856OB-00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Active site imprinting on Ti oxocluster metal-organic frameworks for photocatalytic hydrogen release from formic acid

  • García-Baldoví, Alberto
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Del Angel, Raquel
  • Mouchaham, Georges
  • Liu, Shanping
  • Fan, Dong
  • Maurin, Guillaume
  • Serre, Christian
[EN] On-board hydrogen release from liquid organic carriers is a process that can make feasible the use of H-2 as a transportation fuel. Formic acid is considered as one of the most convenient liquid hydrogen organic carriers, and since it can be easily obtained from CO2, it is water soluble which makes it unnecessary to recover the H-2-depleted byproducts. Compared to the more conventional thermal catalytic decomposition of formic acid, the use of light in combination with a photocatalyst has been much less explored. Herein, we report a new paradigm in MOF photocatalysis with the use of a microporous titanium oxocluster based metal-organic framework (Ti-MOF) endowed with formate-imprinted active sites, namely MIP-177-LT (MIP stands for Materials from Institute of Porous Materials of Paris, LT for Low Temperature), as a highly efficient photocatalyst for H-2 release from formic acid without the need to neutralize acidity or use sacrificial agents or noble metals. Noteworthily, a quantum efficiency of 22% has been determined for the photocatalytic H-2 release that is highly remarkable for a non-toxic noble metal-free photocatalyst., Financial support from Spanish Ministerio de Ciencia e Innovacion (PID2021-126071OB-C21 and Severo Ochoa) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. R. D. A. is thankful to CONACYT for the PhD grant 2018-000003-01EXTF00075 (CVU: 697332). S. N. is gracious for the financial support from Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ``ERDF A way of making Europe''. The computational work was performed using HPC resources from GENCI-CINES (Grant A0120907613).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrogel composites based on chitosan and CuAuTiO2 photocatalysts for hydrogen production under simulated sunlight irradiation

  • Ramírez, Oscar
  • Baldovi, Herme G.
  • Saldías, Cesar
  • Leiva, Angel
  • Díaz, David
  • López-Francés, Antón|||0000-0002-1639-592X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] This study explored the photocatalytic hydrogen evolution reaction (HER) using novel biohydrogel composites comprising chitosan, and a photocatalyst consisting in TiO2 P25 decorated with Au and/or Cu mono- and bimetallic nanoparticles (NPs) to boost its optical and catalytic properties. Low loads of Cu and Au (1 mol%) were incorporated onto TiO2 via a green photodeposition methodology. Characterization techniques confirmed the incorporation of decoration metals as well as improvements in the light absorption properties in the visible light interval (lambda > 390 nm) and electron transfer capability of the semiconductors. Thereafter, Au and/or Cu NP- supported TiO2 were incorporated into chitosan-based physically crosslinked hydrogels revealing significant interactions between chitosan functional groups (hydroxyls, amines and amides) with the NPs to ensure its encapsulation. These materials were evaluated as photocatalysts for the HER using water and methanol mixtures under simulated sunlight and visible light irradiation. Sample CuAuTiO2/ChTPP exhibited a maximum hydrogen generation of 1790 mu mol g(-1) h(-1) under simulated sunlight irradiation, almost 12-folds higher compared with TiO2/ChTPP. Also, the nanocomposites revealed a similar tendency under visible light with a maximum hydrogen production of 590 mu mol g(-1) h(-1) . These results agree with the efficiency of photoinduced charge separation revealed by transient photocurrent and EIS., O.R. acknowledges ANID doctoral scholarship number 21191002. H. G. thanks Ayuda RYC2022-037287-I financiada por MCIN/AEI/10.13039/501100011033 y por El FSE invierte en tu futuro. C.S. thanks FONDECYT project 121022. S.N. thanks the support of grant PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. A.L. thanks to FONDECYT project number 1211122 and FONDAP 1522A006, for financial support for the research. D.D.D. thanks the Spanish Government for the following projects: TED2021-132847B I00/AEI/10.13039/501100011033/Union Europea NextGenerationEU/PRTR and PID2022-142118OB-I00/MCIN/AEI/10.13039/501100011033/UE. D.D.D. also thanks Nanotec, INTech, Cabildo de Tenerife and ULL for laboratory facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Room temperature design of Ce(IV)-MOFs: from photocatalytic HER and OER to overall water splitting under simulated sunlight irradiation

  • Dai, Shan
  • Montero-Lanzuela, Eva
  • Tissot, Antoine
  • Serre, C.
  • Garcia-Baldovi, Hermenegildo
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] The development of MOF-based efficient and reusable catalysts for hydrogen production under simulated sunlight irradiation, especially through overall water splitting, remains challenging. This is mainly due to either the inappropriate optical features or poor chemical stability of the given MOFs. Room temperature synthesis (RTS) of tetravalent MOFs is a promising strategy to design robust MOFs and their related (nano)composites. By employing these mild conditions, herein, we report for the first time that RTS leads to the efficient formation of highly redox active Ce(IV)-MOFs that are inaccessible at elevated temperatures. Consequently, not only highly crystalline Ce-UiO-66-NH2 is synthesized, but also many other derivatives and topologies (8 and 6-connected phases) without compromise in space-time yield. Their photocatalytic HER and OER activities under simulated sunlight irradiation are in good agreement with their energy level band diagrams: Ce-UiO-66-NH2 and Ce-UiO-66-NO2 are the most active photocatalysts for the HER and OER, respectively, with a higher activity than other metal-based UiOtype MOFs. Combining Ce-UiO-66-NH2 with supported Pt NPs results finally in one of the most active and reusable photocatalysts for overall water splitting into H2 and O2 under simulated sunlight irradiation, due to its efficient photoinduced charge separation evidenced by laser flash photolysis and photoluminescence spectroscopies., S. D. thanks the nancial support from CSC grant (grant number 201706140196). The authors appreciate the help of Dr S. Nandi and Dr G. Mouchaham for water isotherms measurements. S. N. appreciates the support from Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe , by the European Union and from grant FPU20/03140 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by ESF Investing in your future or by European Union NextGenerationEU/PRTR . Ministry of Innovation and Science (Severo Ochoa CEX2021-001230-S and RTI2018-89237-CO2-1, both funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021-38) are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improving the water resistance of Bi-based perovskite-inspired materials for vapor-phase photocatalytic overall water splitting

  • Chacón-García, Antonio J.
  • Pols, Mike
  • Tao, Shuxia
  • Calero, Sofía
  • Vitorica-Yrezabal, Iñigo J.
  • Rodríguez-Diéguez, Antonio
  • Horcajada, Patricia
  • Pérez, Yolanda
  • Garcia-Baldovi, Hermenegildo
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Lead halide perovskites are well known for their exceptional photophysical and electronic properties, which have placed them at the forefront of challenging optoelectronic applications and solar-to-fuel conversion. However, their air/water instability, combined with their toxicity, is still a critical problem that has slowed down their commercialization. In this sense, bismuth-based halide derivatives attract much interest as a potentially safer, air-stable alternative. Herein, a novel Bi-based perovskite-inspired material, IEF-19 (IEF stands for IMDEA Energy Framework), which contains a bulky aromatic cation (1,5-diammonium naphthalene), is prepared. Additionally, an N-alkylation strategy is successfully employed to achieve four water-stable perovskite-inspired materials, which contains diammonium naphthalene cations that are tetra-alkylated by methyl, ethyl, propyl, and butyl groups. Moreover, computational studies are performed to gain a deeper understanding of the intrinsic structural stability and affinity of water molecules for Bi-based perovskite-inspired materials. Importantly, the air- and water-stable IEF-19-Et (i.e., stable at least 12 months under ambient conditions and 3 weeks in contact with water) is found to be an active photocatalyst for vapor-phase overall water splitting in the absence of any sacrificial agent under both ultraviolet-visible or simulated sunlight irradiation. This material exhibits an estimated apparent quantum yield of 0.08% at 400 nm, partially explained by its adequate energy band level diagram., A.J.C.-G., Y.P., and P.H. acknowledge Strategic Projects Oriented to Ecological Transition and Digital Transition "H2-MOF" TED2021-132092B-C21 and MADRID-PV2-CM/EMT-4308 project from Comunidad de Madrid. H.G.B. thanks the support of grant no. RYC2022-037287-I funded by MCIN/AEI/10.13039/501100011033 and El FSE invierte en tu futuro. S.N. thanks the support of Grant no. PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, a way of making Europe. S.T. acknowledges funding from VIDI (project no. VI.Vidi.213.091) from NWO, The Netherlands.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Heteroepitaxial MOF-on-MOF Photocatalyst for Solar-Driven Water Splitting

  • Le Huec, Thibaut
  • Abánades Lázaro, Isabel
  • Gimenez Marques, Monica
  • López-Francés, Antón|||0000-0002-1639-592X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Garcia-Baldovi, Hermenegildo
[EN] Assembly of different metal¿organic frameworks (MOFs) into hybrid MOF-on-MOF heterostructures has been established as a promising approach to develop synergistic performances for a variety of applications. Here, we explore the performance of a MOF-on-MOF heterostructure by epitaxial growth of MIL-88B(Fe) onto UiO-66(Zr)¿NH2 nanoparticles. The face-selective design and appropriate energy band structure alignment of the selected MOF constituents have permitted its application as an active heterogeneous photocatalyst for solar-driven water splitting. The composite achieves apparent quantum yields for photocatalytic overall water splitting at 400 and 450 nm of about 0.9%, values that compare much favorably with previous analogous reports. Understanding of this high activity has been gained by spectroscopic and electrochemical characterization together with scanning transmission and transmission electron microscopy (STEM, TEM) measurements. This study exemplifies the possibility of developing a MOF-on-MOF heterostructure that operates under a Zscheme mechanism and exhibits outstanding activity toward photocatalytic water splitting under solar light., The work has been supported by grants PID2020-118564GAI00, PID2021-123856OBI00, and CEX2019-000919-M, funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe . This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana MFA/2022/031, PROMETEO CIPROM/2022/48, and IDIFEDER/ 2021/075. M.G.-M. thanks MICINN for a Ramón y Cajal (RYC2019-027902-I) contract. IAL thanks the la Caixa Foundation for a Junior Leader la Caixa Fellowship (LCF/BQ/PR23/11980041).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solar-driven gas phase photocatalytic CO2 methanation by multimetallic UiO-66 solids decorated with RuOx nanoparticles

  • Cabrero-Antonino, Maria
  • Melillo, Arianna
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • Ferrer Ribera, Rosa Belén
  • Vayá Pérez, Ignacio|||0000-0003-1682-9342
  • Garcia-Baldovi, Hermenegildo
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Montero-Lanzuela, Eva
[EN] As there is an urgent need to produce solar fuels from CO2, we here report on the development of a series of multimetallic UiO-66(Zr/Ce/Ti) solids-supported RuOx nanoparticles as photocatalysts for selective gas phase CO2 methanation by H-2 under simulated sunlight irradiation. The trimetallic UiO-66(Zr/Ce/Ti) based-photocatalyst exhibits higher activity (1,900 mu mol g(-1) of CH4 after 22 h) than analogous mono- [UiO-66(Zr) or UiO-66 (Ce)] and bimetallic [UiO-66(Zr/Ce) or UiO-66(Zr/Ti)] derivatives, as well as higher than previous reports on metal-organic frameworks (MOFs). The experimental evidence on the observed order of photocatalytic activity and insights into the occurrence of a dual photochemical and photothermal mechanism for the most active trimetallic sample were obtained by means of spectroscopic techniques including fluorescence and laser flash photolysis, photoelectrochemical and additional photocatalytic measurements. This study exemplifies the benefits of developing multimetallic MOF-supported metal nanoparticles to achieve high photocatalytic activity for solar-driven gas phase CO2 conversion., Grant FPU20/03140 funded by MCIN/mAEI/10.13039/501100011033 ESF Investing in your future. I.V. thanks the support of grant PID2020-115010RB-I00 funded by MCIN/AEI/10.13039/501100011033. S.N. thanks the support of grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. S.N acknowledges the funding for open access charge from "CRUE-Universitat Politecnica de Valencia."
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photo-thermal Catalytic CO2 Methanation by RuO x @MIL-101(Cr) with 9.2% Apparent Quantum Yield under Visible Light Irradiation

  • Ramirez-Hernandez, Juan Jose
  • Fernandes-de Almeida, Vitor
  • Ferrer Ribera, Rosa Belén
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
  • Vayá Pérez, Ignacio|||0000-0003-1682-9342
  • Garcia-Baldovi, Hermenegildo
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Abou-Khalil, Zahraa
  • Daturi, M
  • Clet, Guillaume
  • El-Roz, Mohamad
[EN] Solar-assisted gaseous CO2 hydrogenation to CH4 is a potential strategy for favoring the transition to net zero emissions. Here, we report the development of a series of efficient metal-organic frameworks with MIL-101(Cr or Fe) topology decorated with RuOx nanoparticles (ca. 0.2-2 wt %) as heterogeneous photocatalysts for the selective methanation of CO2 by H-2 under simulated sunlight irradiation. The activity of RuOx(1 wt %)@MIL-101(Cr) is between 3 and 50 times higher than related MOF-based photocatalysts under similar reaction conditions. Among the different photocatalysts, the optimized RuOx(2 wt %)@MIL-101(Cr) photocatalyst showed 98.1% CO2 conversion with 98.8% CH4 selectivity reaching a production rate of 7.85 mmol g(-1) h(-1) with 720 mW cm(-2) at 200 degrees C. Further, this photocatalyst exhibited a record apparent quantum yield of 9.2% at 600 nm and 200 degrees C after subtracting thermal activity contribution compared to any previous MOF- or other heterogeneous-based photocatalyst reported so far. The photocatalyst retained its activity and integrity upon reuse for about 110 h. Transient photocurrent, electrochemical impedance, photoluminescence, and laser flash photolysis spectroscopies together with additional photocatalytic experiments suggest the occurrance of dual photochemical and photothermal reaction pathways. The photocatalytic CO2 methanation reaction mechanism was further investigated using operando Fourier transform infrared spectroscopy., J.J.R.-H. thanks the Universitat Politecnica de Valencia for the Ph.D. financial support of the PAID-01-21 project. I.V. appreciates the support of Grant PID2020-115010RB-I00 funded by MICIU/AEI/10.13039/501100011033. H.G.B. appreciates the support of Grant No. RYC2022-037287-I funded by MCIN/AEI/1013039/501100011033. The METHASOL project receives funding from the European Union Horizon 2020 research and innovation programme under Grant Agreement No. 10102264. Funding for open access charge: CRUE-Universitat Politecnica de Valencia. A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). F.X.L.X the Spanish Ministry of Science and Innovation (PID2020-112590GB-C21, PID2023-146114NB-C21, and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) for support. This study forms part of the Advanced Materials Program and was supported by MICIN with funding from European Union NextGeneration (PRTR-C17.I1) and by the Generalitat Valenciana (MFA/2022/003). M.E.-R. acknowledges the Normandy Region and the European Union for financial support (project SuntoChem). S.N. appreciates the support received from Grant PID2021-123856OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Regioselectivity in Pyrene-Templated Polymerization Using MOFs as 1D Porous Scaffolds

  • Armani-Calligaris, Giacomo
  • Carrasco, Sergio
  • Martineau-Corcos, Charlotte
  • Ávila, David
  • O'Shea, Víctor A.
  • Salles, Fabrice
  • Horcajada, Patricia
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Physicochemical properties of polymers strongly depend on the arrangement and distribution of attached monomers. Templated polymerization using porous crystalline materials appears as a promising route to gain control on the process. Thus, we demonstrate here the potential of metal-organic frameworks as scaffolds with a versatile and very regular porosity, well adapted for the regioselective oxidative polymerization of pyrene. This photoresponsive monomer was first encapsulated within the one-dimensional (1D) microporosity of the robust zirconium(IV) carboxylate metal-organic framework (MOF) (MIL-140D) to, later, undergo in situ oxidative polymerization, enabling the growth of a highly selective polypyrene (PPyr) regioisomer over other potential polymer configurations. To confirm the polymerization and the geometry control of pyrene, the resulting composites were exhaustively characterized by powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), N-2 sorption measurements, scanning transmission electron microscopy coupled with energy-dispersive X-ray (STEM-EDX) spectroscopy, and fluorescence spectroscopy. Among others, photoluminescence quenching and emission shift in the solid state demonstrated the presence of PPyr inside the MOF porosity. Furthermore, an in-depth joint analysis combining solid-state, magic-angle spinning (MAS) H-1 and C-13 NMR spectroscopy, Fourier transform infrared (FTIR) spectroscopy, matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy (MALDI-TOF MS), and molecular simulations (grand canonical Monte Carlo (GCMC) and density functional theory (DFT)) allowed the elucidation of the spatial, host-guest interactions driving the polymerization reaction., The work has been supported by the 2017 Leonardo Grant for Researchers and Cultural Creators from the BBVA Foundation (ref: IN[17] CBB_QUI_0197). The Foundation accepts no responsibility for the opinions, statements, and contents included in the project and/or the results thereof, which are entirely the responsibility of the authors. This work was also supported by M-ERA.net (2019, C-MOF.cell, MCI/AEI/FEDER, UE) and the Maria de Maeztu excellence label (CEX2019-000931-M) funded by MCIN/AEI/10.13039/501100011033. G.A.-C. thanks the FPI fellowship (BES-2017-082749) associated with the Raphuel project (ENE2016-79608-C2-1-R, MINECOAEI/FEDER, UE). Finally, we would like to thank Christian Sanchez and Laura Garcia from the Central laboratories at IMDEA Energy for their valuable help in the ICP-OES optimization and the team from the proteomics facility of the SCSIE University of Valencia (Spain) for the useful comments on the MALDI-TOF results; this proteomics laboratory is a member of Proteored. S.N. thanks the support received from Grant PID2021-123856OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MOF-on-MOF Composites with UiO-66-Based Materials as Photocatalysts for the Overall Water Splitting under Sunlight Irradiation

  • Melillo, Arianna
  • Cabrero-Antonino, Maria
  • Ferrer Ribera, Rosa Belén
  • Garcia-Baldovi, Hermenegildo
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Dhakshinamoorthy, Amarajothi
[EN] There is a large interest in the sustainable conversion of H2O into H2 and O2, assisted by sunlight. In recent times, metal-organic frameworks (MOFs) have evolved as promising photocatalysts for this reaction. In the present study, a number of novel MOF-on-MOF composites possessing UiO-66 topologies, namely UiO-66(Ce), UiO-66(Zr)-NH2, UiO-66(Zr)NH2@UiO-66(Ce), and UiO-66(Ce)@UiO-66(Zr)-NH2, are prepared, and their photocatalytic activity is examined in the overall water splitting under simulated sunlight irradiation. Among these photocatalysts, promising activity is observed with the UiO-66(Zr)-NH2@UiO-66(Ce) photo catalyst, exhibiting 708 and 320 mu mol g-1 at 22 h for H2 and O2, respectively. This enhanced photocatalytic activity of UiO-66(Zr)-NH2@UiO-66(Ce) is associated with its adequate energy band diagram and ability for photoinduced charge separation, as revealed by several spectroscopic measurements, such as photoluminescence and transient absorption spectroscopy together with specific photocatalytic measurements. This study is an illustrative investigation showing the photocatalytic activity of MOF-on-MOF composites for the overall water splitting under simulated sunlight irradiation., S.N. is gracious for the financial support from the grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. A.D. thanks the Spanish Ministry of Science and Education for a Maria Zambrano contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal Node Control of Bronsted Acidity in Heterobimetallic Titanium-Organic Frameworks

  • Rubio-Gaspar, Ana
  • Tatay, Sergio
  • Cirujano, Francisco G.
  • Fernández-Conde, Carmen
  • Padial, Natalia M.
  • Martí-Gastaldo, Carlos
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] Compared to indirect framework modification, synthetic control of cluster composition can be used to gain direct access to catalytic activities exclusive of specific metal combinations. We demonstrate this concept by testing the aminolysis of epoxides with a family of isostructural mesoporous frameworks featuring five combinations of homometallic and heterobimetallic metal-oxo trimers (Fe3, Ti3, TiFe2, TiCo2, and TiNi2). Only TiFe2 nodes display activities comparable to benchmark catalysts based on grafting of strong acids, which here originate from the combination of Lewis Ti4+ and Bronsted Fe3+-OH acid sites. The applicability of MUV-101(Fe) to the synthesis of beta-amino alcohols is demonstrated with a scope that also includes the gram scale synthesis of propranolol, a natural beta-blocker listed as an essential medicine by the World Health Organization, with excellent yield and selectivity., This work was supported by the EU (ERC Stg Chem-fs-MOF 714122), the Generalitat Valenciana (PROMETEU/2021/054, SEJIGENT/2021/059 and IDIFEDER/2021/075) and the Spanish government (CEX2019-000919-M , PID2020-118117RB-I00, and EUR2021-121999). S.N. is gratef u l to grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", by the "European Union". A.R.-G. tha n k s the Generalitat Valenciana for a PhD fellowship (ACIF/2020/090). N.M.P. and F.G.C. thank La Caixa Foundation for Postdoctoral Junior Leader-Retaining Fellowships (ID 100010434 and 100010434, and fellowship codes LCF/BQ/PR20/11770014 and LCF/BQ/PI19/11690011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nanographite: A highly active and durable metal-free ozonation catalyst with application in natural waters

  • López-Francés, Antón|||0000-0002-1639-592X
  • Cabrero-Antonino, Maria
  • Ferrer Ribera, Rosa Belén
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Garcia-Baldovi, Hermenegildo
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Bernat-Quesada, Francisco
[EN] The development of metal-free heterogeneous catalysts for advanced oxidation processes has emerged as a key focus for both academia and industry. We report on research that seeks to establish a correlation between the crystallographic, physicochemical, textural, and morphological properties of a series of graphite-based solids and their activities as metal-free ozonation catalysts in aqueous media. Our findings show that nanographite (NG) outperforms traditional graphite-based solids, activated carbon and Co3O4. The enhanced activity of NG is due to defective nanosized graphitic structures with high surface areas. NG exhibits an exceptional activity, durability, and recyclability that surpasses other known catalysts. Our study employs electron spin resonance and selective quenching experiments that reveal the generation of 1O2 during catalytic ozonation. Significantly, NG shows excellent catalytic efficiency even when using natural surface river water or seawater. This study illustrates the importance of the natural properties of graphite-based materials as active and durable ozonation catalysts in water., S.N. wishes to thank the Agencia Valenciana de la Innovacio for its financial support (AVI, INNEST/2020/111). S.N. also thanks the support received from Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". S.N acknowledges the funding for open access charge from "CRUE-Universitat Politecnica de Valencia". A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robust hybrid bismuth perovskites as potential photocatalysts for overall water splitting

  • Chacón-García, Antonio J.
  • Babaryk, Artem A.
  • Rodríguez-Diéguez, Antonio
  • Pérez, Yolanda
  • Horcajada, Patricia
  • Garcia-Baldovi, Hermenegildo
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Organic-inorganic hybrid perovskites have gained great attention as promising photocatalysts for hydrogen generation. However, due to their poor stability in water, the use of aqueous hydrohalic acid solutions is specifically required for an efficient hydrogen evolution. Herein, three novel photoactive lead-free hybrid perovskites based on bismuth and triazolium cations (denoted as IEF-15, IEF-16, and IEF-17 (IEF stands for IMDEA energy frameworks)) were synthesized and fully characterized (structural, compositional, optical, etc.). Further, these solids were proposed as photocatalysts for the challenging gas phase overall water splitting (OWS) reaction. Accordingly, IEF-16 thin films exhibited a remarkable photocatalytic activity in both H-2 and O-2 evolution, as a consequence of its appropriate bandgap and energy-band alignment, achieving hydrogen evolution rates of 846 and 360 mu mol center dot gH(2)(-1) after 24 h under ultraviolet-visible (UV-vis) irradiation or simulated solar irradiation, respectively. This study additionally highlights the remarkable structural and photochemical stability of IEF-16 under different operational conditions (i.e. water volume, irradiation and temperature), paving the way for green hydrogen production from OWS using perovskite-based photocatalysts., A. J. C.-G.; Y. P.; and P. H. acknowledge the National MICIU project Retos "MOFieidon" (No. PID2019-104228RB-I00), Strategic Projects Oriented to Ecological Transition and Digital Transition "H2-MOF" (No. TED2021-132092B-C21) and MADRID-PV2-CM/ EMT-4308 project from Comunidad de Madrid. S.N. thanks the support of grant (No. PID2021-123856MBI00) funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solar-Assisted CO2 Methanation via Photocatalytic Sabatier Reaction by Calcined Titanium-based Organic Framework Supported RuOx Nanoparticles

  • Rueda-Navarro, Celia Maria|||0000-0002-9569-7722
  • Marta
  • Cabrero-Antonino, Maria
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Ferrer Ribera, Rosa Belén
  • Garcia-Baldovi, Hermenegildo
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] CO2 reduction by sunlight under mild reaction conditions is a research area of increasing interest expected to favor decarbonization and produce fuels and chemicals in the circular economy. We hereby report on the development of a series of titanium oxide-based solids produced by calcination of MIL-125(Ti)-NH2 decorated with RuOx nanoparticles (1 wt %) material at temperatures from 350 to 650 degrees C and used as photocatalysts for CO2 methanation under simulated sunlight irradiation (45 mW/cm(2)) at <200 degrees C and 1.5 atm total pressure. The material synthesized at 350 degrees C produced the highest photoactivity of the series (4.73 mmol g(-1) CH4 at 22 h and an apparent quantum yield at 400, 500 and 750 nm of 0.76, 0.65 and 0.54 %, respectively), comparing favorably with the activities of other MOF-based materials reported so far. Insights into the material's photocatalytic performance and a study of the possible reaction pathways during CO2 methanation were obtained by electrochemical impedance, electron spin resonance, photoluminescence and in situ FT-IR spectroscopies together with transient photocurrent and hydrogen temperature programed desorption measurements. The study showed the possibility of using MOF-based materials as precursors to develop metal oxide photocatalysts with enhanced activities for solar-driven gaseous CO2 photomethanation., C.M.R.N. thanks the support of PRE2019-089877 funded by MICIU/AEI/10.13039/501100011033. M.G.F. thanks the support of PRE2022-101327 funded by MICIU /AEI/10.13039/501100011033. A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). The METHASOL project receives funding from the European Union Horizon 2020 research and innovation programme under Grant Agreement No10102264. Funding for open access charge: CRUE-Universitat Politecnica de Valencia. H.G.B. Thanks the support of grant number RYC2022-037287-I funded by MCIN/AEI/10.13039/501100011033. S.N. thanks the support of grant PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Novel Ti12-Based Metal-Organic Framework for Photocatalytic Hydrogen Evolution

  • Chen, Bingbing
  • Mansouri, Asma
  • Dovgaliuk, Iurii
  • Boullay, Philipe
  • Xiao, Beibei
  • Fan, Dong
  • Arabindani, Lokuge
  • Patriarche, Gilles
  • Cornu, Ieuan
  • Florian, Pierre
  • Maurin, Guillaume
  • Rueda-Navarro, Celia Maria|||0000-0002-9569-7722
  • Melillo, Arianna
  • Ramirez-Hernandez, Juan Jose
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Garcia-Baldovi, Hermenegildo
[EN] A new microporous titanium-based metal-organic framework (Ti-MOF), labeled as MIP-209(Ti) (MIP: Materials from Institute of Porous Materials of Paris), features nitro terephthalate ligands and Ti12O15 oxo-clusters, as revealed by continuous rotation electron diffraction (cRED). MIP-209(Ti) can be obtained using two different terephthalate (1, 4-BDC2¿) derivatives such as NO2-BDC and 2Cl-BDC in an eco-friendly solvent, suggesting the isostructural versatility of Ti12-MOFs. Alternatively, its Ti-oxo-cluster can be tuned, similarly to MIP-177(Ti)-LT bearing the same Ti12O15 sub-unit. Typically, low percentage Cr3+ doping (¿5 at%) in MIP-209(Ti) favorably enhances the water stability. MIP-209(Ti-Cr)-NO2 shows a significant hydrogen production rate, with good reusability and stability under simulated solar light irradiation. Compared to the benchmark Ti-MOF IEF-11, the hydrogen production of MIP-209(Ti-Cr)-NO2 with 5 at% Cr doping has a fourfold enhancement in photocatalytic hydrogen evolution from water splitting reaction (HER) during 5 h in presence of methanol (5 812 µmol/gcat against 1 391 µmol/gcat), as well as, without any noble metal co-catalyst, a sixfold enhancement in overall water splitting reaction (OWS) (681 and 325 µmol/gcat of H2 and O2, respectively, against 94 and 53 µmol/gcat of H2 and O2, respectively). This work represents a leap forward in the synthesis of Ti-MOFs and their practical photocatalytic applications., The authors acknowledge the European Union under the Grant Agreement 101084131 (MOF2H2 project) for the financial support, and the CNRS-CEA "METSA" French network (FR CNRS 3507) on the platform IRMA (CRISMAT-Caen) for the support in cRED data collection and analysis. The CRISTAL beamline staff members from Soleil synchrotron are acknowledged for the high-energy PXRD data. A.M. is thankful for the financial support by the Spanish Government and Generalitat Valenciana (CIAPOS/2022/071). H.G. is thankful for the financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MICIU/AEI/ 10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). S.N. is thankful for the support of grant PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. The computational work was performed using HPC resources from GENCI-CINES (Grant A0160907613).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of Multivariate Biological Metal-Organic Frameworks: Toward Mimicking Active Sites of Enzymes

  • Navarro-Alapont, Javier
  • Negro, Cristina
  • Navalón, Sergio
  • Armentano, Donatella
  • Ferrando-Soria, Jesus
  • Pardo, Emilio
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
[EN] Mimicking enzymatic processes carried out by natural enzymes, which are highly efficient biocatalysts with key roles in living organisms, attracts much interest but constitutes a synthetic challenge. Biological metal-organic frameworks (bioMOFs) are potential candidates to be enzyme catalysis mimics, as they offer the possibility to combine biometals and biomolecules into open-framework porous structures capable of simulating the catalytic pockets of enzymes. In this work, we first study the catalase activity of a previously reported bioMOF, derived from the amino acid L-serine, with formula {(CaCu6II)-Cu-II[(S,S)-serimox](3)(OH)(2)(H2O)} <middle dot> 39H(2)O (1) (serimox = bis[(S)-serine]oxalyl diamide), which is indeed capable to mimic catalase enzymes, in charge of preventing cell oxidative damage by decomposing, efficiently, hydrogen peroxide to water and oxygen (2H(2)O(2) -> 2 H2O + O-2). With these results in hand, we then prepared a new multivariate bioMOF (MTV-bioMOF) that combines two different types of bioligands derived from L-serine and L-histidine amino acids with formula (CaCu6II)-Cu-II[(S,S)-serimox](2)[(S,S)-hismox](1)(OH)(2)(H2O)}<middle dot>27H(2)O (2) (hismox = bis[(S)-histidine]oxalyl diamide ligand). MTV-bioMOF 2 outperforms 1 degrading hydrogen peroxide, confirming the importance of the amino acid residue from the histidine amino acid acting as a nucleophile in the catalase degradation mechanism. Despite displaying a more modest catalytic behavior than other reported MOF composites, in which the catalase enzyme is immobilized inside the MOF, this work represents the first example of a MOF in which an attempt is made to replicate the active center of the catalase enzyme with its constituent elements and is capable of moderate catalytic activity., This work was supported by the Ministero dell'Istruzione, dell'Universita e della Ricerca (Italy) and the MINECO (Spain) (Projects PID2019-104778GB-I00, PID2021-123856OBI00 PID2022-136349OB-I00 and Excellence Unit "Maria de Maeztu" CEX2019-000919-M). D.A. acknowledges the financial support of the Fondazione CARIPLO/"Economia Circolare: Ricerca per un futuro sostenibile" 2019, Project code: 2019-2090. Thanks are also extended to the "Generalitat Valenciana" (Project PROMETEO/2021/054). E.P. acknowledges the financial support of the European Research Council under the European Union's Horizon 2020 research and innovation programme/ERC Grant Agreement No 814804, MOF-reactors. Thanks are also extended to the Ramon y Cajal Program, RYC2019-027940-I (J.F.-S.). D.A. acknowledges Diamond Light Source (I-19, CY28808-1) for the access to Synchrotron beamtime. This study forms part of the Advanced Materials programme (MFA/2022/048) and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). S.N. thanks the support of grant PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mixed-metal Zr/Ti MIL-173 porphyrinic metal-organic frameworks as efficient photocatalysts towards solar-driven overall water splitting

  • Gikonyo, Ben
  • Montero-Lanzuela, Eva
  • De, Siddhartha
  • Journet, Catherine
  • Devic, Thomas
  • Guillou, Nathalie
  • Tiana, Davide
  • Fateeva, Alexandra
  • Garcia-Baldovi, Hermenegildo
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] Hydrolytically stable MOFs combining Ti(iv) ions and porphyrin ligands are expected to display outstanding photophysical properties, making them ideal photocatalysts for the overall water splitting reaction under solar light. We report here the one-pot synthesis of a microporous MOF built up from a phenolate-based porphyrin ligand and a mixture of Zr(iv) and Ti(iv) ions. A broad set of characterization tools (PXRD, SEM-EDX, TEM, STEM-EDX, solid state UV-vis spectroscopy, XPS, nitrogen sorption) along with DFT calculations were used to confirm that Ti(iv) ions are uniformly inserted in the MIL-173 structure and located in the inorganic building unit. MIL-173(Zr/Ti)-40, containing 40 at% of Ti(iv), exhibits exceptional photocatalytic activity for the overall water splitting into H-2 and O-2 under simulated sunlight irradiation, without the use of any co-catalyst or sacrificial agent. This material operates efficiently under a photoinduced charge separation mechanism as revealed by photocurrent measurements and photoluminescence spectroscopy. This study provides insights for the development of efficient MOF-based materials as photocatalysts for the solar-driven overall water splitting., The authors would like to thank the French National Research Agency for the JCJC STREAM research grant (ANR-17-CE09-0029-01). Grant PID2021-123856OB-I00 was funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", by the "European Union". Grant FPU20/03140 was funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by "ESF Investing in your future" or by "European Union NextGenerationEU/PRTR". The French Ministry of Higher Education and Research is acknowledged for the studentship of B. G. and the Centre Technologique des Microstructures of Lyon University for providing electronic microscopy facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Engineering of Activated Biochar Derived from Pine Needle Waste Biomass as Ozonation Catalyst in Water

  • López-Francés, Antón|||0000-0002-1639-592X
  • Ferrer Ribera, Rosa Belén
  • Garcia-Baldovi, Hermenegildo
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Baldovi, Herme G.
[EN] Valorization of biomass wastes into carbon-based catalysts for water treatment is a clear paradigm of sustainability.Herein, we investigate an unprecedented transformation of pine needle waste biomass into activated biochars (PNCs) as ozonation catalysts for aqueous oxalic acid degradation. The physico-chemical and textural properties of PNCs are tailored by combining pyrolysis temperatures up to 1200 degrees C and the use or not of KOH or K2CO3 as activating agents. The physico-chemical and structural properties of these carbocatalysts are correlated with their catalytic activities. The PNC catalyst pyrolized at 1200 degrees C for 4 h using K2CO3 (PNC1200-4K2CO3) provides a complete pollutant degradation after 150 min, while PNC catalyst pyrolized at 1200 degrees C for 4 h without activation requires 300 min. PNC1200-4K2CO3 performance compares favorably with previous reports. The superior catalytic activity of this reusable catalyst is attributed to its highest population of pi-extended aromatic domains as active sites together with high porosity. The catalytic formation of 1O2, HO. and HOO. radicals are supported by electron paramagnetic resonance measurements and selective quenching experiments. Unlike most of the previous analogous reports, herein, we demonstrate that 1O2 in the presence of PNC1200-4K2CO3 can degrade oxalic acid even in the presence of common radical scavengers., A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, Next Generation EU). H.G. thanks to Ayuda RYC2022-037287-I financiada por MCIN/AEI /10.13039/501100011033 y por El FSE invierte en tu future. S.N. thanks the support received from Grant PID2021-123856OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective Gas-Phase Hydrogenation of CO2 to Methanol Catalysed by Metal-Organic Frameworks

  • Dhakshinamoorthy, Amarajothi
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Large scale production of green CH3OH obtained from CO2 and green H-2 is a highly wanted process due to the role of CH3OH as H-2/energy carrier and for producing chemicals. Starting with a short summary of the advantages of metal-organic frameworks (MOFs) as catalysts in liquid-phase reactions, the present article highlights the opportunities that MOFs may offer also for some gas-phase reactions, particularly for the selective CO2 hydrogenation to CH3OH. It is commented that there is a temperature compatibility window that combines the thermal stability of some MOFs with the temperature required in the CO2 hydrogenation to CH3OH that frequently ranges from 250 to 300 degrees C. The existing literature in this area is briefly organized according to the role of MOF as providing the active sites or as support of active metal nanoparticles (NPs). Emphasis is made to show how the flexibility in design and synthesis of MOFs can be used to enhance the catalytic activity by adjusting the composition of the nodes and the structure of the linkers. The influence of structural defects and material crystallinity, as well as the role that should play theoretical calculations in models have also been highlighted., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). AD is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). S.N. thanks the support of Grant PID2021-123856OBI00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. The METHASOL project receives funding from the European Union Horizon 2020 research and innovation programme under Grant Agreement No 101022649.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Porous Metal Organic Frameworks as Multifunctional Catalysts for Cyclohexane Oxidation

  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • López-Francés, Antón|||0000-0002-1639-592X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Catalysis drives the conversion of substrates to the wanted products under amenable reaction conditions. In this context, one reaction that is particularly important from the industrial point of view is cyclohexane aerobic oxidation to a mixture of the corresponding cyclohexanone and cyclohexanol. This industrial oxidation is key for the production of Nylon 6 and Nylon 6,6, two polyamides of growing production. The industrial process is clearly unsatisfactory since it is run at low cyclohexane conversions to avoid the formation of complex mixtures, difficult to isolate. The present review shows the progress made in the use of metal-organic frameworks as solid catalysts for this important reaction, with emphasis in the intrinsic activity of metal nodes, tuning of the polarity of the internal voids or incorporation of active metal nanoparticles. It is shown that using MOFs as catalysts, it is possible to reach high cyclohexane conversions, while the combined alcohol+ketone selectivity still close to the 90 % limit., AD thanks Universitat Politecnica de Valencia for Maria Zambrano support. AD also thanks University Grants Commission for the award of UGC-Assistant Professor. Financial support from the Spanish Ministry of Science and Innovation (Severo Ochoa and PID2021-126071OB-C21) and Generalitat Valenciana is gratefully acknowledged. SN thanks Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biopolymer-derived structured graphitic carbons as metal-free heterogeneous ozonation catalysts in water

  • López-Francés, Antón|||0000-0002-1639-592X
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Peng, Lu
  • Bernat-Quesada, Francisco
  • Ferrer, Belén
  • Navalón, Sergio
[EN] The development of metal-free heterogeneous catalysts for advanced oxidation processes is an important area of research, advancing in sustainability, with potential practical applications in water treatment. In this work, we report the development of defective structured graphitic carbons synthesized from biomass including alginate or chitosan polysaccharides and used as metal-free ozonation catalysts in water. These solids were characterized by several techniques, including powder X-ray diffraction, several spectroscopies (i.e. X-ray photoelectron, Raman or Fourier Transform infrared), elemental combustion analyses, thermogravimetric measurements, and electron microscopic techniques. The catalytic performance of graphitic carbon was examined in the ozonation reaction and the graphitic carbon derived from alginate (G) was found to be the most active catalyst by showing complete degradation in less than 4 h under the operational conditions as oxalic acid (50 mg L -1 ), catalyst (100 mg L -1 ), 20 degrees C, O 3 dosage (140 mg h -1 ) at pH 3. Importantly, this solid retains its activity mostly upon reuse for more than 20 h, an observation that compares favorably with previous reports using graphene-based materials. In addition, activity of partially deactivated catalyst can be recovered by a pyrolysis process associated to the reconstitution of graphitic active sites of the catalyst. Experimental evidence by electron spin resonance together with specific (photo)catalytic experiments is provided to support the role of 1 O 2 as key intermediate during the oxalic acid degradation in water in the presence of G. This study exemplifies the activity of active graphitic-based solids from biomass precursors as ozonation heterogeneous catalysts in water in the absence of any metal., S.N. thanks the support received from Grant PID2021-123856OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU) . H.G. thanks the financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MICIU/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17. I1) . Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photocatalytic Hydrogen Production from Glycerol Aqueous Solutions as Sustainable Feedstocks Using Zr-Based UiO-66 Materials under Simulated Sunlight Irradiation

  • Rueda-Navarro, Celia Maria|||0000-0002-9569-7722
  • Ferrer Ribera, Rosa Belén
  • Garcia-Baldovi, Hermenegildo
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] There is an increasing interest in developing cost-effective technologies to produce hydrogen from sustainable resources. Herein we show a comprehensive study on the use of metal-organic frameworks (MOFs) as heterogeneous photocatalysts for H-2 generation from photoreforming of glycerol aqueous solutions under simulated sunlight irradiation. The list of materials employed in this study include some of the benchmark Zr-MOFs such as UiO-66(Zr)-X (X: H, NO2, NH2) as well as MIL-125(Ti)-NH2 as the reference Ti-MOF. Among these solids, UiO-66(Zr)-NH2 exhibits the highest photocatalytic H-2 production, and this observation is attributed to its adequate energy level. The photocatalytic activity of UiO-66(Zr)-NH2 can be increased by deposition of small Pt NPs as the reference noble metal co-catalyst within the MOF network. This photocatalyst is effectively used for H-2 generation at least for 70 h without loss of activity. The crystallinity of MOF and Pt particle size were maintained as revealed by powder X-ray diffraction and transmission electron microscopy measurements, respectively. Evidence in support of the occurrence of photoinduced charge separation with Pt@UiO-66(Zr)-NH2 is provided from transient absorption and photoluminescence spectroscopies together with photocurrent measurements. This study exemplifies the possibility of using MOFs as photocatalysts for the solar-driven H-2 generation using sustainable feedstocks., Y S.N. is gracious for the financial support from the Agencia Valenciana de la Innovacio (AVI, INNEST/2020/111) project and Grant PID2021-123856OB-I00 fundedby MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Two-dimensional Co-based porphyrin metal-organic framework as heterogeneous catalyst for the aerobic oxidation of benzylic hydrocarbon

  • Uscategui-Linares, Andrés Felipe|||0000-0003-2448-9966
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Santiago-Portillo, Andrea
  • Dhakshinamoorthy, Amarajothi
  • Parvulescu, Vasile
[EN] The development of heterogeneous catalysts for hydrocarbon oxidation by molecular oxygen as oxidant is an area of increasing interest from academia and chemical industry points of views. Herein, the catalytic activity of two-dimensional (2D) porphyrin metal -organic frameworks (MOFs) constituted by Co 2 + , Cu 2 + or Mn 3 + as transition metal ions coordinated to tetra(4-carboxyphenyl)porphyrin (TCPP) organic ligand as heterogeneous catalysts for the aerobic oxidation of benzylic hydrocarbon oxidation is reported. Selective radical quenching experiments and in -situ Raman measurements reveal the formation of superoxide/hydroperoxide and hydroxyl radicals during the catalytic reaction using Co-CoTCPP., Financial support the Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S financed support by MCIN/AEI/10.13039/501100011033) , and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) are gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR) . S.N. thanks the support of grant PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU) .r (Severo Ochoa CEX2021-1230-S financed support by MCIN/AEI/10.13039/501100011033) , and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Gen-eration EU, through the Conselleria de Innovaci on, Universidades, Ciencia y Sociedad Digital) are gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR) . S.N. thanks the support of grant PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Uni-versities, financed by the European Union, NextGeneration EU) .
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rational design of a carbon/potassium poly(heptazine imide) heterojunction for enhanced photocatalytic H2 and H2O2 evolution

  • Pelicano, Christian Mark
  • Li, Jiaxin
  • Silva, Ingrid F.
  • Peng, Lu
  • Tarakina, Nadezda V.
  • Antonietti, Markus
  • Cabrero-Antonino, Maria
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] We present the rational design of carbon/potassium poly(heptazine imide) (KPHI) heterostructures via one-step salt-melt assisted condensation for efficient photocatalysis. Hybridizing KPHI with an adenine-derived carbonaceous material (Ad-carbon) displayed an outstanding photocatalytic H-2 evolution activity (738 mu mol h(-1) g(cat)(-1); with 3 wt% Pt as the cocatalyst) and photocatalytic H2O2 production (3.94 mmol h(-1) g(cat)(-1)). We establish that the Ad-carbon simultaneously operates as an electron acceptor and a photosensitizer based on structural, optical and photo(electro)chemical characterization. Building an intimate heterojunction between the Ad-carbon and KPHI induced spatial charge separation and prolonged the carrier lifetime. From electrocatalysis, we confirmed that coupling Ad-carbon with KPHI enhanced the surface reaction kinetics towards H-2 evolution and O-2 reduction reactions. Moreover, visual evidence of superior charge transport in the hybrid photocatalyst is revealed through the photodeposition of smaller Pt nanoparticles (similar to 7 nm) with uniform distribution on the carbon regions, which also accounts for the increased catalytic activity., The authors gratefully acknowledge Bolortuya Badamdorj for the SEM and TEM measurements, Antje Voelkel for measuring elemental analysis, Jessica Brandt for ICP-OES measurements, Ursula Lubahn for technical support, and Volker Strauss for the synthesis of HPPT-carbon. We acknowledge the financial support of the Max Planck Society. I. F. S. thanks the Alexander von Humboldt Foundation for her postdoctoral fellowship. S. N. acknowledges the support of Grant PID2021-123856OBI00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. Open Access funding was provided by the Max Planck Society.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Solar Gas-Phase CO2 Hydrogenation by Multifunctional UiO-66 Photocatalysts

  • Rueda-Navarro, Celia Maria|||0000-0002-9569-7722
  • Melillo, Arianna
  • Vayá Pérez, Ignacio|||0000-0003-1682-9342
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Abou Khalil, Zahraa
  • Ferrer, Belen
  • Montero, Raul
  • Longarte, Asier
  • Daturi, Marco
  • El-Roz, Mohamad
  • Martínez-Martínez, Virginia
  • Baldovi, Herme G.
[EN] Solar-assisted CO2 conversion into fuels and chemical products involves a range of technologies aimed at driving industrial decarbonization methods. In this work, we report on the development of a series of multifunctional metal-organic frameworks (MOFs) based on nitro- or amino-functionalized UiO-66(M) (M: Zr or Zr/Ti) supported RuOx NPs as photocatalysts, having different energy band level diagrams, for CO2 hydrogenation under simulated concentrated sunlight irradiation. RuOx(1 wt %; 2.2 +/- 0.9 nm)@UiO-66(Zr/Ti)-NO2 was found to be a reusable photocatalyst, to be selective for CO2 methanation (5.03 mmol g(-1) after 22 h;, apparent quantum yield at 350, 400, and 600 nm of 1.67, 0.25, and 0.01%, respectively), and to show about 3-6 times activity compared with previous investigations. The photocatalysts were characterized by advanced spectroscopic techniques like femto- and nanosecond transient absorption, spin electron resonance, and photoluminescence spectroscopies together with (photo)electrochemical measurements. The photocatalytic CO2 methanation mechanism was assessed by operando FTIR spectroscopy. The results indicate that the most active photocatalyst operates under a dual photochemical and photothermal mechanism. This investigation shows the potential of multifunctional MOFs as photocatalysts for solar-driven CO2 recycling., C.M.R.N. thanks the support of PRE2019-089877 funded by MICIU/AEI/10.13039/501100011033. I.V. thanks the support of grant PID2020-115010RB-I00 funded by MICIU/AEI/10.13039/501100011033. A.L. thanks the support from the MICIU through grant PID2021-127918NB-I00. V.M.M. thanks financial support of grants PID2020-114347RB-C32 funded by MICIU/AEI/10.13039/501100011033 as well as Vasco-Eusko Jaurlaritza (project IT1639-22) and by ERDF "A way of making Europe". The METHASOL project receives funding from the European Union Horizon 2020 research and innovation programme under Grant Agreement N degrees 10102264. Funding for open access charge: CRUE-Universitat Politecnica de Valencia. S.N. thanks the support of grant PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF "A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Translocation and Confinement of Tetraamines in Adaptable Microporous Cavities

  • Rubio-Gaspar, Ana
  • Misturini, Alechania
  • Millan, Reisel
  • Almora-Barrios, Neyvis
  • Tatay, S.
  • Bon, Volodymyr
  • Bonneau, Mickaele
  • Guillerm, Vincent
  • Eddaoudi, Mohamed
  • Kaskel, Stefan
  • Armentano, Donatella
  • Marti-Gastaldo, Carlos
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] Metal-Organic Frameworks can be grafted with amines by coordination to metal vacancies to create amine-appended solid adsorbents, which are being considered as an alternative to using aqueous amine solutions for CO2 capture. In this study, we propose an alternative mechanism that does not rely on the use of neutral metal vacancies as binding sites but is enabled by the structural adaptability of heterobimetallic Ti2Ca2 clusters. The combination of hard (Ti4+) and soft (Ca2+) metal centers in the inorganic nodes of the framework enables MUV-10 to adapt its pore windows to the presence of triethylenetetramine molecules. This dynamic cluster response facilitates the translocation and binding of tetraamine inside the microporous cavities to enable the formation of bis-coordinate adducts that are stable in water. The extension of this grafting concept from MUV-10 to larger cavities not restrictive to CO2 diffusion will complement other strategies available for the design of molecular sorbents for decarbonization applications.; We introduce an alternative to the use of open metal vacancies in the design of amine-appended adsorbents based on the use of secondary building units combining of hard and soft metal sites. This endows MUV-10 with a flexible response to the uptake of tetraamines that facilitates their translocation into the microporous cavities of the framework to form stable bis-coordinate adducts that can remain stable in water. image, This work was supported by the H2020 program (ERC-2021-COG-101043428), the Generalitat Valenciana (PROMETEU/2021/054, IDIFEDER/2021/075 and MFA/2022/026) and the Spanish government (CEX2019-000919-M, PID2020-118117RB-I00 and CNS2022-135677). A. R.-G. acknowledges the Generalitat Valenciana for a predoctoral grant (ACIF/2020/090). We also thank the University of Valencia for research facilities (NANBIOSIS). S.N. thanks the support of grant PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. We also thank ALBA (XALOC BL13, 2022086946) and Diamond Light Source (I-19, CY28808-1) for the access to Synchrotron beamtime. BSC-RES is also acknowledged for computational resources (QHS-2023-2-0016 and QHS-2023-3-0022).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unveiling the mechanism of ozone activation in water via singlet oxygen over cyclodextrin derived graphitic carbocatalysts

  • López-Francés, Antón|||0000-0002-1639-592X
  • Emanuela Accardo
  • Ferrer Ribera, Rosa Belén
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Garcia-Mulero, Ana
  • Franconetti, Antonio
  • Primo, Ana
  • Navalón, Sergio
[EN] Metal-free heterogeneous ozonation catalysis is recognized as a promising technology for water decontamination. Herein, we report the development of cyclodextrin (CD) derived graphitic (G) carbons through pyrolysis of alpha-, beta- and gamma-CDs under Ar atmosphere with fine-tuned activity as ozonation carbocatalysts for the degradation of oxalic acid in water. The G carbon obtained from alpha-CD showed the highest activity compared to its analogous solids under similar conditions. This solid was reused several times with a slight decrease in its activity, but after deactivation the performance of the fresh material can be restored in a large extent by a thermal pyrolysis treatment. Selective quenching experiments and electron spin resonance measurements with trapping agents revealed that O3 is transformed by interaction with G into 1O2 that becomes the active species. Experimental and computational evidence indicated that 1O2 reacts with the graphitic domains of Gs via endoperoxide intermediate that is the responsible species for oxalic acid degradation. These novel findings underscore the unforeseen importance of carbocatalytic O3 transformation into 1O2 species that further react with graphitic domains of the carbocatalyst leading to the formation of endoperoxide intermediate that is a bis oxyl radical precursor responsible for oxalic acid degradation., A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). The center of Supercomputing of Galicia (CESGA) for the computational facilities is acknowledged. S.N. thanks the support received from Grant PID2021-123856OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. Funding for open access charge: CRUE-Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal-Organic Frameworks as Photocatalysts for Solar-Driven Overall Water Splitting

  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • Ferrer Ribera, Rosa Belén
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Metal-organic frameworks (MOFs) have been frequently used as photocatalysts for the hydrogen evolution reaction (HER) using sacrificial agents with UV-vis or visible light irradiation. The aim of the present review is to summarize the use of MOFs as solar-driven photocatalysts targeting to overcome the current efficiency limitations in overall water splitting (OWS). Initially, the fundamentals of the photocatalytic OWS under solar irradiation are presented. Then, the different strategies that can be implemented on MOFs to adapt them for solar photocatalysis for OWS are discussed in detail. Later, the most active MOFs reported until now for the solar-driven HER and/or oxygen evolution reaction (OER) are critically commented. These studies are taken as precedents for the discussion of the existing studies on the use of MOFs as photocatalysts for the OWS under visible or sunlight irradiation. The requirements to be met to use MOFs at large scale for the solar-driven OWS are also discussed. The last section of this review provides a summary of the current state of the field and comments on future prospects that could bring MOFs closer to commercial application., S.N. is gracious for the financial support from Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe. The MOF2H2 project receives funding from the European Union Horizon Europe research and innovation programme under Grant Agreement No101084131. The METHASOL project receives funding from the European Union Horizon 2020 research and innovation programme under Grant Agreement No101022649. A.D. thanks the Universitat Politecnica de Valencia for financial assistance through Maria Zambrano. H.G. is thankful for financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa) and the Generalitat Valenciana (Prometeo2021-038). H.G. is also gracious for the financial support from Grant PID2021-126071OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe."
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Two Cu-Based Phosphonate Metal-Organic Frameworks as Efficient Water-Splitting Photocatalysts

  • Salcedo-Abraira, Pablo
  • Serrano Nieto, Rubén
  • Biglione, Catalina
  • Vilela, Sérgio M.F.
  • Babaryk, Artem A.
  • Tilve-Martínez, David
  • Rodriguez-Diéguez, Antonio
  • Horcajada, Patricia
  • Cabrero-Antonino, Maria
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Two novel three-dimensional metal-organic frameworks(MOFs)based on the photoactive pyrene tetraphosphonate ligand and copper(denoted as IEF-8 and IEF-9) have been hydrothermally synthesizedand fully characterized (XRD, FTIR, TGA, SEM, XPS, etc.). Their crystalstructures were unveiled by single-crystal X-ray diffraction. Remarkably,these materials exhibit coordinatively unsaturated copper (II) sites,free -PO3H2 and -PO3H acidic groups, and good thermal and chemical stability. Further,their optoelectronic characterization evidenced a photoresponse suitablefor photocatalysis. In this sense, the photocatalytic activity ofpyrene phosphonate MOFs was evaluated for the first time for the challenginghydrogen evolution reaction. In particular, IEF-8 exhibited a catalyticefficiency higher than that of the benchmarked Ti carboxylate photocatalystMIL-125-(Ti)-NH2, producing 1800 mu mol center dot g(-1) after 22 h under UV-vis irradiation in theabsence of any co-catalyst. Furthermore, this material presented goodreusability (at least up to 4 cycles), preserving its activity andstructural integrity., The authors acknowledge the Maria de Maeztu IMDEA Energy Institute, the M-ERA-NET C-MOF-cell project, the Retos Investigacion MOFSEIDON project (PID2019-104228RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union, MICIU-AEI/FEDER, UE), and the H2-MOF project (TED2021-132092B-C21 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR). They thank "Comunidad de Madrid" and European Regional Development Fund-FEDER 2014-2020-OE REACT-UE 1for their financial support to the VIRMOF-CM project associated to R & D projects in response to COVID-19. S.N. thanks the support of grant PID2021-123856OBI00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Challenges and opportunities for N-hydroxyphthalimide supported over heterogeneous solids for aerobic oxidations

  • Caruso, Manfredi
  • Cametti, Massimo
  • Punta, Carlo
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Organocatalysis, in combination with, or as an alternative to the use of metals, is attracting increasing interest as a sustainable route to promote selective transformations. In this context, N- hydroxyphthalimide (NHPI) has found ample application as an effective organocatalyst capable to pro-mote the aerobic oxidation of a wide range of organic substrates, including saturated and unsaturated hydrocarbons, alcohols, amines and sulphides among others. However, most of these transformations required the use of NHPI dissolved in solution, with consequent limits in the scale-up of the process. Leaving aside the reviews of NHPI as organocatalyst in homogeneous phase, the present review describes the strategies reported to support or anchor NHPI on a wide range of insoluble solids, thus converting this homogeneous organocatalyst into a heterogeneous system, with the consequent advantages related to the ease of separation and recovery of the catalyst from the reaction medium, its recyclability and the possibility to develop continuous flow reactions. After a brief introductory section, a detailed description of the catalytic mechanism is here presented, also providing a comparison between NHPI and 2,2,6,6-tet ramethylpiperidine-1-oxyl (TEMPO) radical, and by highlighting the main challenges associated to NHPI heterogenization. The critical description of the heterogeneous solutions is organized according to the nature of the support, focusing on metal-organic frameworks (MOFs), organic polymers, carbon-based materials, and inorganic supports, while the growing use of NHPI-containing photocatalysts is presented separately. In the final section, we outline the main achievements on the use of NHPI heterogeneous catalysis and provide our views for future developments in the area., S.N. is gracious for the financial support from Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe. A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). H.G. is thankful for financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa Financial support by Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/5011000110 33) and the Generalitat Valenciana (Prometeo2021-038). H.G. is also gracious for the financial support from Grant PID2021-126071OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Titanium MXenes as Heterogeneous Catalysts for the Styrene-to-Benzaldehyde Oxidation: Influence of the Etching Conditions

  • Rapeyko, Anastasia|||0000-0002-8309-3702
  • Barjola-Ruiz, Arturo
  • Seva-Rejón, Maria Dolores
  • Sahuquillo, Oscar|||0000-0001-5360-3743
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Giménez Torres, Enrique|||0000-0002-6330-0209
  • Llabrés i Xamena, Francesc Xavier|||0000-0002-4238-5784
[EN] Ti3C2Tz MXenes are prepared under different etching conditions and tested as heterogeneous catalysts for the selective oxidation of styrene to benzaldehyde. A clear dependence is observed between the etching conditions (hydrofluoric acid concentration and etching time) and the surface chemistry, morphology and catalytic performance of the resulting MXenes. Under appropriate conditions, etching of the Ti3AlC2 MAX phase precursor with concentrated HF produces Ti3C2Tz MXenes with highly accessible accordion-like structures and accessible Ti¿O surface terminations that can act as active species for the catalytic process, keeping up with the best catalysts reported so far for this reaction. The present study represents one of the few existing reports on catalytic properties of MXenes under mild liquid-phase conditions, paving the way for future developments of this new family of 2D materials for fine chemical applications., Financial support from the Spanish Ministry of Science and Innovation (PID2020-112590GB C21 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. This study forms part of the Advanced Materials Program and was supported by MICIN with funding from European Union Next Generation (PRTR C17.I1) and by the Generalitat Valenciana (MFA/2022/003). S.N. thanks the support of grant PID2021-123856OB I00 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photoaccumulation of Long-Lived Reactive Electrons in a Microporous Ti(IV) Oxocluster-Based Metal-Organic Framework for Light and Dark Photocatalysis

  • Yao, Shilin
  • Heinzerling, Katrin
  • Hillman, Sam A. J.
  • Podjaski, Filip
  • He, Tianhao
  • Baghdadi, Yasmine
  • Dassouki, Khaled
  • Eslava, Salvador
  • Steunou, Nathalie
  • Gonzalez-Carrero, Soranyel
  • Mouchaham, Georges
  • Serre, Christian
  • García-Baldoví, Alberto
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] The microporous Ti12 oxocluster-based metal-organic framework (MOF) MIP-177(Ti)-LT exhibits excellent stability and photoactivity, making it highly promising for photocatalysis. Using transient and photoinduced absorption spectroscopies, the behavior of reactive electrons in MIP-177(Ti)-LT across femtosecond-to-second timescales is investigated. The framework shows efficient charge separation and slow decay kinetics, with photogenerated charges persisting into the microsecond-second (mu s-s) range and displaying higher yields and slower recombination than benchmark MOFs MIL-125(Ti)-NH2 and UiO-66(Zr)-NH2. Photogenerated holes oxidize water with an O2 yield of 335 mu mol g-1 h-1 in the presence of electron scavengers. Under continuous irradiation, long-lived electrons accumulate, further enhanced by a hole scavenger (methanol). Remarkably, these electrons persist over 48 h post-excitation under argon, accompanied by a reversible white-to-black color change. The stored electrons remain redox-active, efficiently reducing added O2 and methyl viologen. Dark addition of a Pt co-catalyst to photocharged MIP-177(Ti)-LT induces H2 evolution at approximate to 300 mu mol g-1 (approximate to 58 C g-1), corresponding to an accumulated electron density of one electron per 12 Ti atoms. These results highlight the photocharging properties of MIP-177(Ti)-LT and its potential for sustainable photocatalytic applications., This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 101022649 (Methasol). S.Y. acknowledges financial support from China Scholarship Council-Imperial Scholarship, and lab support from Dr. Xiaoe Li and Dr. Pabitra Shakya Tuladhar. S.N., H.G., G.M., and C.S. acknowledge the European Union under the Grant Agreement 101084131 (MOF2H2 project) for the financial support. F.P. and J.D. acknowledge funding from UKRI (grant reference EP/X027449/1) and EPSRC (grant reference EP/T028513/1). H.G. thanks financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PDI2021-0126071-OB-CO21) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). S.N. thanks the support received from Grant PID2021-123856OB-I00, both funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. S.G-C. acknowledge financial support from Generalitat de Valenciana (CIDEIG/2023/17).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphitic Carbon Nitride as Visible-Light Photocatalyst Boosting Ozonation in Wastewater Treatment

  • Dhakshinamoorthy, Amarajothi
  • López-Francés, Antón
  • Navalón, Sergio
  • García Gómez, Hermenegildo
Light can boost ozone efficiency in advanced oxidation processes (AOPs), either by direct ozone photolysis with UV light or by using a photocatalyst that can be excited with UV-Vis or solar light. The present review summarizes literature data on the combination of ozone and the g-CN photocatalyst for the degradation of probe molecules in water, including oxalic, p-hydroxybenzoic and oxamic acids as well as ciprofloxacin and parabens. g-CN is a metal-free visible-light photocatalyst based on abundant elements that establishes a synergistic effect with ozone, the efficiency of the combination of the photocatalysis and ozonation being higher than the sum of the two treatments independently. Available data indicate that this synergy derives from the higher efficiency in the generation of hydroxyl radicals due to the efficient electron quenching by O of photogenerated conduction band electrons in the g-CN photocatalyst. Given the wide use of ozonizers in water treatment, it is proposed that their implementation with g-CN photocatalysis could also boost ozone efficiency in the AOPs of real waste waters., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and PIDS2021-126071OB-C21) and Generalitat Valenciana (Prometeo 2021-038) is gratefully acknowledged. S.N. thanks financial support by Agència Valenciana de la Innovació (AVI, INNEST/2020/111) project and Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Active site imprinting on Ti oxocluster metal-organic frameworks for photocatalytic hydrogen release from formic acid

  • García-Baldoví, Alberto
  • Del Angel, Raquel
  • Mouchaham, Georges
  • Liu, Shanping
  • Fan, Dong
  • Maurin-Pasturel, Guillaume
  • Navalón, Sergio
  • Serre, Christian
  • García Gómez, Hermenegildo
On-board hydrogen release from liquid organic carriers is a process that can make feasible the use of H as a transportation fuel. Formic acid is considered as one of the most convenient liquid hydrogen organic carriers, and since it can be easily obtained from CO, it is water soluble which makes it unnecessary to recover the H-depleted byproducts. Compared to the more conventional thermal catalytic decomposition of formic acid, the use of light in combination with a photocatalyst has been much less explored. Herein, we report a new paradigm in MOF photocatalysis with the use of a microporous titanium oxocluster based metal-organic framework (Ti-MOF) endowed with formate-imprinted active sites, namely MIP-177-LT (MIP stands for Materials from Institute of Porous Materials of Paris, LT for Low Temperature), as a highly efficient photocatalyst for H release from formic acid without the need to neutralize acidity or use sacrificial agents or noble metals. Noteworthily, a quantum efficiency of 22% has been determined for the photocatalytic H release that is highly remarkable for a non-toxic noble metal-free photocatalyst., Financial support from Spanish Ministerio de Ciencia e Innovación (PID2021-126071OB-C21 and Severo Ochoa) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. R. D. A. is thankful to CONACYT for the PhD grant 2018-000003-01EXTF-00075 (CVU: 697332). S. N. is gracious for the financial support from Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. The computational work was performed using HPC resources from GENCI-CINES (Grant A0120907613)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Challenges and opportunities for N-hydroxyphthalimide supported over heterogeneous solids for aerobic oxidations

  • Caruso, Manfredi
  • Navalón, Sergio
  • Cametti, Massimo
  • Dhakshinamoorthy, Amarajothi
  • Punta, Carlo
  • García Gómez, Hermenegildo
Organocatalysis, in combination with, or as an alternative to the use of metals, is attracting increasing interest as a sustainable route to promote selective transformations. In this context, N-hydroxyphthalimide (NHPI) has found ample application as an effective organocatalyst capable to promote the aerobic oxidation of a wide range of organic substrates, including saturated and unsaturated hydrocarbons, alcohols, amines and sulphides among others. However, most of these transformations required the use of NHPI dissolved in solution, with consequent limits in the scale-up of the process. Leaving aside the reviews of NHPI as organocatalyst in homogeneous phase, the present review describes the strategies reported to support or anchor NHPI on a wide range of insoluble solids, thus converting this homogeneous organocatalyst into a heterogeneous system, with the consequent advantages related to the ease of separation and recovery of the catalyst from the reaction medium, its recyclability and the possibility to develop continuous flow reactions. After a brief introductory section, a detailed description of the catalytic mechanism is here presented, also providing a comparison between NHPI and 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical, and by highlighting the main challenges associated to NHPI heterogenization. The critical description of the heterogeneous solutions is organized according to the nature of the support, focusing on metal–organic frameworks (MOFs), organic polymers, carbon-based materials, and inorganic supports, while the growing use of NHPI-containing photocatalysts is presented separately. In the final section, we outline the main achievements on the use of NHPI heterogeneous catalysis and provide our views for future developments in the area., S.N. is gracious for the financial support from Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe. A.D. is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). H.G. is thankful for financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa Financial support by Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033) and the Generalitat Valenciana (Prometeo2021-038). H.G. is also gracious for the financial support from Grant PID2021-126071OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solar-driven gas phase photocatalytic CO2 methanation by multimetallic UiO-66 solids decorated with RuOx nanoparticles

  • Cabrero-Antonino, María
  • Melillo, A.
  • Montero-Lanzuela, E.
  • Álvaro Rodríguez, Mercedes
  • Ferrer, B.
  • Vayá, Ignacio
  • Baldoví, Herme G.
  • Navalón, Sergio
As there is an urgent need to produce solar fuels from CO, we here report on the development of a series of multimetallic UiO-66(Zr/Ce/Ti) solids-supported RuO nanoparticles as photocatalysts for selective gas phase CO methanation by H under simulated sunlight irradiation. The trimetallic UiO-66(Zr/Ce/Ti) based-photocatalyst exhibits higher activity (1,900 μmol g of CH after 22 h) than analogous mono- [UiO-66(Zr) or UiO-66(Ce)] and bimetallic [UiO-66(Zr/Ce) or UiO-66(Zr/Ti)] derivatives, as well as higher than previous reports on metal–organic frameworks (MOFs). The experimental evidence on the observed order of photocatalytic activity and insights into the occurrence of a dual photochemical and photothermal mechanism for the most active trimetallic sample were obtained by means of spectroscopic techniques including fluorescence and laser flash photolysis, photoelectrochemical and additional photocatalytic measurements. This study exemplifies the benefits of developing multimetallic MOF-supported metal nanoparticles to achieve high photocatalytic activity for solar-driven gas phase CO conversion., Grant FPU20/03140 funded by MCIN/mAEI/ 10.13039/501100011033 ESF Investing in your future. I.V. thanks the support of grant PID2020-115010RB-I00 funded by MCIN/AEI/10.13039/501100011033. S.N. thanks the support of grant PID2021-123856OB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe. S.N acknowledges the funding for open access charge from “CRUE-Universitat Politècnica de València.”
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rational design of a carbon/potassium poly(heptazine imide) heterojunction for enhanced photocatalytic H2 and H2O2 evolution

  • Pelicano, Christian Mark
  • Li, Jiaxin
  • Cabrero-Antonino, María
  • Silva, Ingrid F.
  • Peng, Lu
  • Tarakina, Nadezda V.
  • Navalón, Sergio
  • García Gómez, Hermenegildo
  • Antonietti, Markus
We present the rational design of carbon/potassium poly(heptazine imide) (KPHI) heterostructures via one-step salt-melt assisted condensation for efficient photocatalysis. Hybridizing KPHI with an adenine-derived carbonaceous material (Ad-carbon) displayed an outstanding photocatalytic H evolution activity (738 μmol h g; with 3 wt% Pt as the cocatalyst) and photocatalytic HO production (3.94 mmol h g). We establish that the Ad-carbon simultaneously operates as an electron acceptor and a photosensitizer based on structural, optical and photo(electro)chemical characterization. Building an intimate heterojunction between the Ad-carbon and KPHI induced spatial charge separation and prolonged the carrier lifetime. From electrocatalysis, we confirmed that coupling Ad-carbon with KPHI enhanced the surface reaction kinetics towards H evolution and O reduction reactions. Moreover, visual evidence of superior charge transport in the hybrid photocatalyst is revealed through the photodeposition of smaller Pt nanoparticles (∼7 nm) with uniform distribution on the carbon regions, which also accounts for the increased catalytic activity., The authors gratefully acknowledge Bolortuya Badamdorj for the SEM and TEM measurements, Antje Völkel for measuring elemental analysis, Jessica Brandt for ICP-OES measurements, Ursula Lubahn for technical support, and Volker Strauss for the synthesis of HPPT-carbon. We acknowledge the financial support of the Max Planck Society. I. F. S. thanks the Alexander von Humboldt Foundation for her postdoctoral fellowship. S. N. acknowledges the support of Grant PID2021-123856OBI00 funded by MCIN/AEI/10.13039/501100011033 and by ERDFA way of making Europe. Open Access funding was provided by the Max Planck Society.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Room temperature design of Ce(iv)-MOFs: from photocatalytic HER and OER to overall water splitting under simulated sunlight irradiation

  • Dai, Shan
  • Montero-Lanzuela, E.
  • Tissot, Antoine
  • Baldoví, Herme G.
  • García Gómez, Hermenegildo
  • Navalón, Sergio
  • Serre, Christian
The development of MOF-based efficient and reusable catalysts for hydrogen production under simulated sunlight irradiation, especially through overall water splitting, remains challenging. This is mainly due to either the inappropriate optical features or poor chemical stability of the given MOFs. Room temperature synthesis (RTS) of tetravalent MOFs is a promising strategy to design robust MOFs and their related (nano)composites. By employing these mild conditions, herein, we report for the first time that RTS leads to the efficient formation of highly redox active Ce(iv)-MOFs that are inaccessible at elevated temperatures. Consequently, not only highly crystalline Ce-UiO-66-NH is synthesized, but also many other derivatives and topologies (8 and 6-connected phases) without compromise in space-time yield. Their photocatalytic HER and OER activities under simulated sunlight irradiation are in good agreement with their energy level band diagrams: Ce-UiO-66-NH and Ce-UiO-66-NO are the most active photocatalysts for the HER and OER, respectively, with a higher activity than other metal-based UiO-type MOFs. Combining Ce-UiO-66-NH with supported Pt NPs results finally in one of the most active and reusable photocatalysts for overall water splitting into H and O under simulated sunlight irradiation, due to its efficient photoinduced charge separation evidenced by laser flash photolysis and photoluminescence spectroscopies., S. D. thanks the financial support from CSC grant (grant number 201706140196). The authors appreciate the help of Dr S. Nandi and Dr G. Mouchaham for water isotherms measurements. S. N. appreciates the support from Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by the “European Union” and from grant FPU20/03140 funded by MCIN/AEI/10.13039/501100011033 and, as appropriate, by “ESF Investing in your future” or by “European Union NextGenerationEU/PRTR”. Ministry of Innovation and Science (Severo Ochoa CEX2021-001230-S and RTI2018-89237-CO2-1, both funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021-38) are gratefully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Acid-catalyzed diastereoselective reactions inside MOF pores

  • García Baldoví, Hermenegildo
  • Navalón, Sergio
  • Llabrés i Xamena, Francesc X.
Grant PID2020-112590GB-C21 funded by MCIN/AEI/10.13039/501100011033. S.N. thanks the support of grant PID2021-123856OB-I00 funded byMCIN/AEI/10.13039/ 501100011033 and by ERDF A way of making Europe
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solar-assisted photocatalytic water splitting using defective UiO-66solids from modulated synthesis

  • Rueda-Navarro, Celia M.
  • Cabrero-Antonino, María
  • Escamilla, Paula
  • Díez-Cabanes, Valentín
  • Fan, Dong
  • Atienzar, Pedro
  • Ferrer, B.
  • Vayá, Ignacio
  • Maurin, Guillaume
  • Baldoví, Herme G.
  • Navalón, Sergio
C. M. R. thanks the support of PRE2019-089877 funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future. V. D-C. is grateful to the European Union’s Horizon 2020 Research and Innovation Program project MOF2H2 (GA No. 101084131) for the financial support. Computational ressources were provided by the Centre informatique national de l’enseignement supérieur (CINES) Supercomputing facilities and the local ICGM clusters. I. V. thanks the support of grant PID2020-115010RB-I00 funded by MCIN/AEI/10.13039/501100011033. S. N. thanks the support of grant PID2021-123856OBI00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective Gas-Phase Hydrogenation of CO2 to Methanol Catalysed by Metal-Organic Frameworks

  • Dhakshinamoorthy, Amarajothi
  • Navalón, Sergio
  • Primo, Ana
  • García Gómez, Hermenegildo
Large scale production of green CHOH obtained from CO and green H is a highly wanted process due to the role of CHOH as H/energy carrier and for producing chemicals. Starting with a short summary of the advantages of metal–organic frameworks (MOFs) as catalysts in liquid-phase reactions, the present article highlights the opportunities that MOFs may offer also for some gas-phase reactions, particularly for the selective CO hydrogenation to CHOH. It is commented that there is a temperature compatibility window that combines the thermal stability of some MOFs with the temperature required in the CO hydrogenation to CHOH that frequently ranges from 250 to 300 °C. The existing literature in this area is briefly organized according to the role of MOF as providing the active sites or as support of active metal nanoparticles (NPs). Emphasis is made to show how the flexibility in design and synthesis of MOFs can be used to enhance the catalytic activity by adjusting the composition of the nodes and the structure of the linkers. The influence of structural defects and material crystallinity, as well as the role that should play theoretical calculations in models have also been highlighted., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). AD is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). S.N. thanks the support of Grant PID2021-123856OBI00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. The METHASOL project receives funding from the European Union Horizon 2020 research and innovation programme under Grant Agreement N°101022649.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust hybrid bismuth perovskites as potential photocatalysts for overall water splitting

  • Chacón-García, Antonio J.
  • Baldoví, Herme G.
  • Babaryk, Artem A.
  • Rodríguez-Diéguez, Antonio
  • Navalón, Sergio
  • Pérez, Yolanda
  • García Gómez, Hermenegildo
  • Horcajada, Patricia
Organic–inorganic hybrid perovskites have gained great attention as promising photocatalysts for hydrogen generation. However, due to their poor stability in water, the use of aqueous hydrohalic acid solutions is specifically required for an efficient hydrogen evolution. Herein, three novel photoactive lead-free hybrid perovskites based on bismuth and triazolium cations (denoted as IEF-15, IEF-16, and IEF-17 (IEF stands for IMDEA energy frameworks)) were synthesized and fully characterized (structural, compositional, optical, etc.). Further, these solids were proposed as photocatalysts for the challenging gas phase overall water splitting (OWS) reaction. Accordingly, IEF-16 thin films exhibited a remarkable photocatalytic activity in both H and O evolution, as a consequence of its appropriate bandgap and energy-band alignment, achieving hydrogen evolution rates of 846 and 360μmol⋅g after 24 h under ultraviolet–visible (UV–vis) irradiation or simulated solar irradiation, respectively. This study additionally highlights the remarkable structural and photochemical stability of IEF-16 under different operational conditions (i.e. water volume, irradiation and temperature), paving the way for green hydrogen production from OWS using perovskite-based photocatalysts., A. J. C.-G.; Y. P.; and P. H. acknowledge the National MICIU project Retos “MOFieidon” (No. PID2019-104228RB-I00), Strategic Projects Oriented to Ecological Transition and Digital Transition “H2-MOF” (No. TED2021-132092B-C21) and MADRID-PV2-CM/ EMT-4308 project from Comunidad de Madrid. S.N. thanks the support of grant (No. PID2021-123856MBI00) funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Regioselectivity in Pyrene-Templated Polymerization Using MOFs as 1D Porous Scaffolds

  • Armani-Calligaris, Giacomo
  • Carrasco, Sergio
  • Atienzar, Pedro
  • Navalón, Sergio
  • Martineau-Corcos, Charlotte
  • Ávila, David
  • Peña O'Shea, Víctor A. de la
  • García Gómez, Hermenegildo
  • Salles, Fabrice
  • Horcajada, Patricia
Physicochemical properties of polymers strongly depend on the arrangement and distribution of attached monomers. Templated polymerization using porous crystalline materials appears as a promising route to gain control on the process. Thus, we demonstrate here the potential of metal-organic frameworks as scaffolds with a versatile and very regular porosity, well adapted for the regioselective oxidative polymerization of pyrene. This photoresponsive monomer was first encapsulated within the one-dimensional (1D) microporosity of the robust zirconium(IV) carboxylate metal-organic framework (MOF) (MIL-140D) to, later, undergo in situ oxidative polymerization, enabling the growth of a highly selective polypyrene (PPyr) regioisomer over other potential polymer configurations. To confirm the polymerization and the geometry control of pyrene, the resulting composites were exhaustively characterized by powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), N sorption measurements, scanning transmission electron microscopy coupled with energy-dispersive X-ray (STEM-EDX) spectroscopy, and fluorescence spectroscopy. Among others, photoluminescence quenching and emission shift in the solid state demonstrated the presence of PPyr inside the MOF porosity. Furthermore, an in-depth joint analysis combining solid-state, magic-angle spinning (MAS) H and C NMR spectroscopy, Fourier transform infrared (FTIR) spectroscopy, matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy (MALDI-TOF MS), and molecular simulations (grand canonical Monte Carlo (GCMC) and density functional theory (DFT)) allowed the elucidation of the spatial, host-guest interactions driving the polymerization reaction., The work has been supported by the 2017 Leonardo Grant for Researchers and Cultural Creators from the BBVA Foundation (ref: IN[17] CBB_QUI_0197). The Foundation accepts no responsibility for the opinions, statements, and contents included in the project and/or the results thereof, which are entirely the responsibility of the authors. This work was also supported by M-ERA.net (2019, C-MOF.cell, MCI/AEI/FEDER, UE) and the Maria de Maeztu excellence label (CEX2019-000931-M) funded by MCIN/AEI/10.13039/501100011033. G.A.-C. thanks the FPI fellowship (BES-2017-082749) associated with the Raphuel project (ENE2016-79608-C2-1-R, MINECOAEI/FEDER, UE). Finally, we would like to thank Christian Sánchez and Laura García from the Central laboratories at IMDEA Energy for their valuable help in the ICP-OES optimization and the team from the proteomics facility of the SCSIE University of Valencia (Spain) for the useful comments on the MALDI-TOF results; this proteomics laboratory is a member of Proteored. S.N. thanks the support received from Grant PID2021–123856OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Valorization of Field-Spent Granular Activated Carbon as Heterogeneous Ozonation Catalyst for Water Treatment

  • López-Francés, Antón
  • Cabrero-Antonino, María
  • Bernat-Quesada, Francisco
  • Ferrer, Belén
  • Blanes, María
  • García, Rafael
  • Almenar, Pura
  • Álvaro, Mercedes
  • Dhakshinamoorthy, Amarajothi
  • Baldoví, Herme G.
  • Navalón, Sergio
Developing sustainable cost-effective strategies for valorization of field-spent granular activated carbon (s-GAC) from industrial water treatment has gained much interest. Here, we report a cost-effective strategy for the regeneration of s-GAC as an adsorbent in a large-scale drinking water treatment plant and used as an efficient and durable ozonation catalyst in water. To achieve this, a series of samples is prepared by subjecting s-GAC to thermally controlled combustion treatments with and without pyrolysis. The catalytic performance of the optimized sample is evaluated for oxalic acid degradation as the model pollutant under batch (>15 h) and continuous flow operations (>200 h). The partially deactivated catalyst upon reuse is restored by thermal treatment. Electron paramagnetic resonance and selective quenching experiments show the formation of singlet oxygen (O) during catalytic ozonation. The GAC-ozonation catalyst is efficient to minimize the formation of chlorinated disinfection by-products like trihalomethanes and haloacetic acids in an urban wastewater effluent., A.D. is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, Next Generation EU). HG thanks the financial support by the Health Research Institute of the Balearic Islands (grant COVID-19/25) by the Regional Ministry of European funds and Generalitat València project (AICO/2019/21421). H.G. thanks to Ayuda RYC2022-037287-I financiada por MCIN/AEI /10.13039/501100011033 y por El FSE invierte en tu future. S.N. thanks financial support by Agència Valenciana de la Innovació (AVI, INNEST/2020/111) project and is also grateful from Grant PID2021-123856OB-00 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biopolymer-derived structured graphitic carbons as metal-free heterogeneous ozonation catalysts in water

  • López-Francés, Antón
  • Peng, Lu
  • Bernat-Quesada, Francisco
  • Ferrer, Belén
  • Navalón, Sergio
  • Dhakshinamoorthy, Amarajothi
  • García Gómez, Hermenegildo
The development of metal-free heterogeneous catalysts for advanced oxidation processes is an important area of research, advancing in sustainability, with potential practical applications in water treatment. In this work, we report the development of defective structured graphitic carbons synthesized from biomass including alginate or chitosan polysaccharides and used as metal-free ozonation catalysts in water. These solids were characterized by several techniques, including powder X-ray diffraction, several spectroscopies (i.e. X-ray photoelectron, Raman or Fourier Transform infrared), elemental combustion analyses, thermogravimetric measurements, and electron microscopic techniques. The catalytic performance of graphitic carbon was examined in the ozonation reaction and the graphitic carbon derived from alginate (G) was found to be the most active catalyst by showing complete degradation in less than 4 h under the operational conditions as oxalic acid (50 mg L), catalyst (100 mg L), 20 °C, O dosage (140 mg h) at pH 3. Importantly, this solid retains its activity mostly upon reuse for more than 20 h, an observation that compares favorably with previous reports using graphene-based materials. In addition, activity of partially deactivated catalyst can be recovered by a pyrolysis process associated to the reconstitution of graphitic active sites of the catalyst. Experimental evidence by electron spin resonance together with specific (photo)catalytic experiments is provided to support the role of O as key intermediate during the oxalic acid degradation in water in the presence of G. This study exemplifies the activity of active graphitic-based solids from biomass precursors as ozonation heterogeneous catalysts in water in the absence of any metal., S.N. thanks the support received from Grant PID2021–123856OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. A.D. is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). H.G. thanks the financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MICIU/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17. I1). Funding for open access charge: CRUE-Universitat Politècnica de València.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improving the Water Resistance of Bi-Based Perovskite-Inspired Materials for Vapor-Phase Photocatalytic Overall Water Splitting

  • Chacón-García, Antonio J.
  • Baldoví, Herme G.
  • Pols, Mike
  • Tao, Shuxia
  • Calero, Sofia
  • Navalón, Sergio
  • Vitórica-Yrezábal, Iñigo J.
  • Rodríguez-Diéguez, Antonio
  • García Gómez, Hermenegildo
  • Horcajada, Patricia
  • Pérez, Yolanda
Lead halide perovskites are well known for their exceptional photophysical and electronic properties, which have placed them at the forefront of challenging optoelectronic applications and solar-to-fuel conversion. However, their air/water instability, combined with their toxicity, is still a critical problem that has slowed down their commercialization. In this sense, bismuth-based halide derivatives attract much interest as a potentially safer, air-stable alternative. Herein, a novel Bi-based perovskite-inspired material, IEF-19 (IEF stands for IMDEA Energy Framework), which contains a bulky aromatic cation (1,5-diammonium naphthalene), is prepared. Additionally, an N-alkylation strategy is successfully employed to achieve four water-stable perovskite-inspired materials, which contains diammonium naphthalene cations that are tetra-alkylated by methyl, ethyl, propyl, and butyl groups. Moreover, computational studies are performed to gain a deeper understanding of the intrinsic structural stability and affinity of water molecules for Bi-based perovskite-inspired materials. Importantly, the air- and water-stable IEF-19-Et (i.e., stable at least 12 months under ambient conditions and 3 weeks in contact with water) is found to be an active photocatalyst for vapor-phase overall water splitting in the absence of any sacrificial agent under both ultraviolet–visible or simulated sunlight irradiation. This material exhibits an estimated apparent quantum yield of 0.08% at 400 nm, partially explained by its adequate energy band level diagram., .J.C.-G., Y.P., and P.H. acknowledge Strategic Projects Oriented to Ecological Transition and Digital Transition “H2-MOF” TED2021-132092B-C21 and MADRID-PV2-CM/ EMT-4308 project from Comunidad de Madrid. H.G.B. thanks the support of grant no. RYC2022-037287-I funded by MCIN/AEI/10.13039/501100011033 and El FSE invierte en tu futuro. S.N. thanks the support of Grant no. PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, a way of making Europe. S.T. acknowledges funding from VIDI (project no. VI.Vidi.213.091) from NWO, The Netherlands.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solar Gas-Phase CO2 Hydrogenation by Multifunctional UiO-66 Photocatalysts

  • Rueda-Navarro, Celia M.
  • Abou Khalil, Zahraa
  • Melillo, A.
  • Ferrer, B.
  • Montero, R.
  • Longarte Aldama, Asier
  • Daturi, Marco
  • Vayá, Ignacio
  • El-Roz, M.
  • Martínez-Martínez, Virginia
  • Baldoví, Herme G.
  • Navalón, Sergio
Solar-assisted CO conversion into fuels and chemical products involves a range of technologies aimed at driving industrial decarbonization methods. In this work, we report on the development of a series of multifunctional metal-organic frameworks (MOFs) based on nitro- or amino-functionalized UiO-66(M) (M: Zr or Zr/Ti) supported RuO NPs as photocatalysts, having different energy band level diagrams, for CO hydrogenation under simulated concentrated sunlight irradiation. RuO(1 wt %; 2.2 ± 0.9 nm)@UiO-66(Zr/Ti)-NO was found to be a reusable photocatalyst, to be selective for CO methanation (5.03 mmol g after 22 h;, apparent quantum yield at 350, 400, and 600 nm of 1.67, 0.25, and 0.01%, respectively), and to show about 3-6 times activity compared with previous investigations. The photocatalysts were characterized by advanced spectroscopic techniques like femto- and nanosecond transient absorption, spin electron resonance, and photoluminescence spectroscopies together with (photo)electrochemical measurements. The photocatalytic CO methanation mechanism was assessed by operando FTIR spectroscopy. The results indicate that the most active photocatalyst operates under a dual photochemical and photothermal mechanism. This investigation shows the potential of multifunctional MOFs as photocatalysts for solar-driven CO recycling., C.M.R.N. thanks the support of PRE2019-089877 funded by MICIU/AEI/10.13039/501100011033. I.V. thanks the support of grant PID2020-115010RB-I00 funded by MICIU/AEI/10.13039/501100011033. A.L. thanks the support from the MICIU through grant PID2021-127918NB-I00. V.M.M. thanks financial support of grants PID2020-114347RB-C32 funded by MICIU/AEI/10.13039/501100011033 as well as Vasco-Eusko Jaurlaritza (project IT1639-22) and by ERDF “A way of making Europe”. The METHASOL project receives funding from the European Union Horizon 2020 research and innovation programme under Grant Agreement N°10102264. Funding for open access charge: CRUE-Universitat Politècnica de València. S.N. thanks the support of grant PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF “A way of making Europe”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solar-Assisted CO2 Methanation via Photocatalytic Sabatier Reaction by Calcined Titanium-based Organic Framework Supported RuOx Nanoparticles

  • Rueda-Navarro, Celia M.
  • González-Fernández, M.
  • Cabrero-Antonino, María
  • Dhakshinamoorthy, Amarajothi
  • Ferrer, B.
  • Baldoví, Herme G.
  • Navalón, Sergio
CO reduction by sunlight under mild reaction conditions is a research area of increasing interest expected to favor decarbonization and produce fuels and chemicals in the circular economy. We hereby report on the development of a series of titanium oxide-based solids produced by calcination of MIL-125(Ti)-NH decorated with RuO nanoparticles (1 wt %) material at temperatures from 350 to 650 °C and used as photocatalysts for CO methanation under simulated sunlight irradiation (45 mW/cm) at <200 °C and 1.5 atm total pressure. The material synthesized at 350 °C produced the highest photoactivity of the series (4.73 mmol g CH at 22 h and an apparent quantum yield at 400, 500 and 750 nm of 0.76, 0.65 and 0.54 %, respectively), comparing favorably with the activities of other MOF-based materials reported so far. Insights into the material's photocatalytic performance and a study of the possible reaction pathways during CO methanation were obtained by electrochemical impedance, electron spin resonance, photoluminescence and in situ FT-IR spectroscopies together with transient photocurrent and hydrogen temperature programed desorption measurements. The study showed the possibility of using MOF-based materials as precursors to develop metal oxide photocatalysts with enhanced activities for solar-driven gaseous CO photomethanation., C.M.R.N. thanks the support of PRE2019-089877 funded by MICIU/AEI/10.13039/501100011033. M.G.F. thanks the support of PRE2022-101327 funded by MICIU /AEI/10.13039/501100011033. A.D. is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). The METHASOL project receives funding from the European Union Horizon 2020 research and innovation programme under Grant Agreement N°10102264. Funding for open access charge: CRUE-Universitat Politècnica de València. H.G.B. Thanks the support of grant number RYC2022-037287-I funded by MCIN/AEI/10.13039/501100011033. S.N. thanks the support of grant PID2021-123856OBI00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Titanium MXenes as Heterogeneous Catalysts for the Styrene-to-Benzaldehyde Oxidation: Influence of the Etching Conditions

  • Rapeyko, Anastasia
  • Barjola, Arturo
  • Seva, M.D.
  • Sahuquillo, O.
  • Navalón, Sergio
  • Giménez, E.
  • Llabrés i Xamena, Francesc X.
TiCT MXenes are prepared under different etching conditions and tested as heterogeneous catalysts for the selective oxidation of styrene to benzaldehyde. A clear dependence is observed between the etching conditions (hydrofluoric acid concentration and etching time) and the surface chemistry, morphology and catalytic performance of the resulting MXenes. Under appropriate conditions, etching of the TiAlC MAX phase precursor with concentrated HF produces TiCT MXenes with highly accessible accordion-like structures and accessible Ti−O surface terminations that can act as active species for the catalytic process, keeping up with the best catalysts reported so far for this reaction. The present study represents one of the few existing reports on catalytic properties of MXenes under mild liquid-phase conditions, paving the way for future developments of this new family of 2D materials for fine chemical applications., Financial support from the Spanish Ministry of Science and Innovation (PID2020-112590GB−C21 and CEX2021-001230-S grants funded by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. This study forms part of the Advanced Materials Program and was supported by MICIN with funding from European Union Next Generation (PRTR−C17.I1) and by the Generalitat Valenciana (MFA/2022/003). S.N. thanks the support of grant PID2021-123856OB−I00 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe.