Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Unlocking mixed oxides with unprecedented stoichiometries from heterometallic metal-organic frameworks for the catalytic hydrogenation of CO2

  • Castells-Gil, Javier
  • Ould-Chikh, Samy
  • Ramírez, Adrian
  • Ahmad, Rafia
  • Rodríguez Gómez, Alberto
  • Garzón-Tovar, Luis
  • Telalovic, Selvedin
  • Liu, Lingmei
  • Genovese, Alessandro
  • Padial, Natalia M.
  • Aguilar-Tapia, Antonio
  • Bordet, Pierre
  • Cavallo, Luigi
  • Martí-Gastaldo, Carlos
  • Prieto González, Gonzalo|||0000-0002-0956-3040
[EN] Their complex surface chemistry and high oxygen lattice mobilities place mixed-metal oxides among the most important families of materials. Modulation of stoichiometry in mixed-metal oxides has been shown to be a very powerful tool for tuning optical and catalytic properties. However, accessing different stoichiometries is not always synthetically possible. Here, we show that the thermal decomposition of the recently reported metal-organic framework MUV-101(Fe, Ti) results in the formation of carbon-supported titanomaghemite nanoparticles with an unprecedented Fe/Ti ratio close to 2, not achievable by soft-chemistry routes. The resulting titanomaghemite phase displays outstanding catalytic activity for the production of CO from CO2 via the reverse water-gas shift (RWGS) reaction with CO selectivity values of ca. 100% and no signs of deactivation after several days on stream. Theoretical calculations suggest that the reaction proceeds through the formation of COOH¿ species, favoring in this way CO over other byproducts., Daliang Zhang is acknowledged for his help with Digital Micrograph scripts used to acquire image stacks during our in situ TEM experiments. This work was supported by the European Union (ERC Stg Chem-fs-MOF 714122) and the Spanish government (CTQ2017-83486-P and CEX2019-000919-M). N.M.P. thanks the European Union for a Marie Sklodowska-Curie Global Fellowship (H2020-MSCA-IF-2016-GF749359-EnanSET).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal Node Control of Bronsted Acidity in Heterobimetallic Titanium-Organic Frameworks

  • Rubio-Gaspar, Ana
  • Tatay, Sergio
  • Cirujano, Francisco G.
  • Fernández-Conde, Carmen
  • Padial, Natalia M.
  • Martí-Gastaldo, Carlos
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] Compared to indirect framework modification, synthetic control of cluster composition can be used to gain direct access to catalytic activities exclusive of specific metal combinations. We demonstrate this concept by testing the aminolysis of epoxides with a family of isostructural mesoporous frameworks featuring five combinations of homometallic and heterobimetallic metal-oxo trimers (Fe3, Ti3, TiFe2, TiCo2, and TiNi2). Only TiFe2 nodes display activities comparable to benchmark catalysts based on grafting of strong acids, which here originate from the combination of Lewis Ti4+ and Bronsted Fe3+-OH acid sites. The applicability of MUV-101(Fe) to the synthesis of beta-amino alcohols is demonstrated with a scope that also includes the gram scale synthesis of propranolol, a natural beta-blocker listed as an essential medicine by the World Health Organization, with excellent yield and selectivity., This work was supported by the EU (ERC Stg Chem-fs-MOF 714122), the Generalitat Valenciana (PROMETEU/2021/054, SEJIGENT/2021/059 and IDIFEDER/2021/075) and the Spanish government (CEX2019-000919-M , PID2020-118117RB-I00, and EUR2021-121999). S.N. is gratef u l to grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe", by the "European Union". A.R.-G. tha n k s the Generalitat Valenciana for a PhD fellowship (ACIF/2020/090). N.M.P. and F.G.C. thank La Caixa Foundation for Postdoctoral Junior Leader-Retaining Fellowships (ID 100010434 and 100010434, and fellowship codes LCF/BQ/PR20/11770014 and LCF/BQ/PI19/11690011).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Wrapping up Metal-Organic Framework Crystals with Carbon Nanotubes

  • Lerma-Berlanga, Belén|||0000-0003-3686-8576
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Padial, Natalia M.
  • Galbiati, Marta
  • Brotons-Alcázar, Isaac
  • Forment-Aliaga, Alicia
  • Ganivet, Carolina R.
  • Marti-Gastaldo, Carlos
[EN] The presence of tetrazine units in the organic nodes of UiO-68-TZCD controls the formation of ultrathin coatings of single-wall nanotubes that decorate the surface of the crystal. These crystal hybrids can be prepared straightforwardly in one step and are extraordinarily respectful with the properties of the framework for combination of mesoporosity and surface areas approximate to 4.000 m(2) g(-1), with excellent stability in water, and conductivities at room temperature of 4 x 10(-2) S cm(-1) even at very low carbon weight contents (2.3 wt.%)., B.L.-B. and N.M.P. contributed equally to the work. This work was supported by the EU H2020 program (ERC-2021-COG-101043428 & ERC-2016-STG-714122), the Generalitat Valenciana (PROMETEU/2021/054 and SEJIGENT/2021/059) and the Spanish government (CEX2019-000919-M, PID2020-118117RB-I00 & EUR2021-121999). B.L.-B. thanks the Spanish government for an FPU (FPU16/04162). N.M.P. and M.G. thanks La Caixa Foundation for a Postdoctoral Junior Leader-Retaining Fellowship (ID 100010434 & ID 100010434 and fellowship code LCF/BQ/PR20/11770014 & LCF/BQ/PR21/11840011). The authors also thank the University of Valencia for its research facilities (NANBIOSIS). J.A. and H. G. are grateful to the Spanish Ministry of Science and Innovation (RTI2018-98237-CO2-1) and Generalitat Valenciana (Prometeo 2021-038) for the financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Epitaxial Thin-Film vs Single Crystal Growth of 2D Hofmann-Type Iron(II) Materials: A Comparative Assessment of their Bi-Stable Spin Crossover Properties

  • Bartual-Murgui, Carlos
  • Rubio-Giménez, Victor
  • Meneses-Sánchez, Manuel
  • Valverde-Muñoz, Francisco Javier
  • Tatay, Sergio
  • Marti-Gastaldo, Carlos
  • Real, José Antonio
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] Integration of the ON-OFF cooperative spin crossover (SCO) properties of FeII coordination polymers as components of electronic and/or spintronic devices is currently an area of great interest for potential applications. This requires the selection and growth of thin films of the appropriate material onto selected substrates. In this context, two new series of cooperative SCO two-dimensional FeII coordination polymers of the Hofmann-type formulated {FeII(Pym)2[MII(CN)4]·xH2O}n and {FeII(Isoq)2[MII(CN)4]}n (Pym = pyrimidine, Isoq = isoquinoline; MII = Ni, Pd, Pt) have been synthesized, characterized, and the corresponding Pt derivatives selected for fabrication of thin films by liquid-phase epitaxy (LPE). At ambient pressure, variable-temperature single-crystal X-ray diffraction, magnetic, and calorimetric studies of the Pt and Pd microcrystalline materials of both series display strong cooperative thermal induced SCO properties. In contrast, this property is only observed for higher pressures in the Ni derivatives. The SCO behavior of the {FeII(L)2[PtII(CN)4]}n thin films (L = Pym, Isoq) were monitored by magnetization measurements in a SQUID magnetometer and compared with the homologous samples of the previously reported isostructural {FeII(Py)2[PtII(CN)4]}n (Py = pyridine). Application of the theory of regular solutions to the SCO of the three derivatives allowed us to evaluate the effect on the characteristic SCO temperatures and the hysteresis, as well as the associated thermodynamic parameters when moving from microcrystalline bulk solids to nanometric thin films., We thank the Spanish Ministerio de Economia y Competitividad (MINECO) and FEDER funds (CTQ2016-78341-P, CTQ2017-83486-P, RTI2018-098568-A-100 and Unidad de Excelencia Maria de Maeztu MDM-2015-0538), Generalitat Valenciana (PROMETEO/2016/147) and EU Framework FET-OPEN project COSMICS (grant agreement 766726) and ERC Stg Chem-fs-MOF (714122). S.T. thanks the Ramon y Cajal Fellowship (RYC-2016-19817). V.R.-G. thanks the Spanish Ministerio de Ciencia, Innovacion y Universidades (MCIU) for his FPU (FPU13/03203) predoctoral fellowship. FJVM and MMS thank MINECO for a predoctoral FPI grant. The atomic spectroscopy section of SCSIE (Universitat deValencia) is gratefully acknowledged for the Elemental CHNSO analysis. We also thank Francisco Palazon for his assistance with GIXRD measurements and Alejandra SorianoPortillo and Angel Lopez-Muñoz for their technical support
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

De novo synthesis of mesoporous photoactive titanium(iv)-organic frameworks with MIL-100 topology

  • Castells-Gil, Javier
  • Padial, Natalia M.
  • Almora-Barrios, Neyvis
  • da Silva, Ivan
  • Mateo-Mateo, Diego
  • Martí-Gastaldo, Carlos
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Most developments in the chemistry and applications of metal-organic frameworks (MOFs) have been made possible thanks to the value of reticular chemistry in guiding the unlimited combination of organic connectors and secondary building units (SBUs) into targeted architectures. However, the development of new titanium-frameworks still remains limited by the difficulties in controlling the formation of persistent Ti-SBUs with predetermined directionality amenable to the isoreticular approach. Here we report the synthesis of a mesoporous Ti-MOF displaying a MIL-100 topology. MIL-100(Ti) combines excellent chemical stability and mesoporosity, intrinsic to this archetypical family of porous materials, with photoactive Ti-3((3)-O) metal-oxo clusters. By using high-throughput synthetic methodologies, we have confirmed that the formation of this SBU is thermodynamically favored as it is not strictly dependent on the metal precursor of choice and can be regarded as an adequate building block to control the design of new Ti-MOF architectures. We are confident that the addition of a mesoporous solid to the small number of crystalline, porous titanium-frameworks available will be a valuable asset to accelerate the development of new porous photocatalysts without the pore size limitations currently imposed by the microporous materials available., This work was supported by the EU (ERC Stg Chem-fs-MOF 714122) and Spanish MINECO (MDM-2015-0538 & CTQ2017-83486-P). C. M.-G. and J. C.-G. thank the Spanish MINECO for a Ramon y Cajal Fellowship (RYC-2012-10894) and FPI Scholarship (CTQ2014-59209-P). N. M. P. thanks the European Union for a Marie Skodowska-Curie Global Fellowship (H2020-MSCA-IF-2016-GF-749359-EnanSET). We thank the ISIS Facility for the access to synchrotron radiation, BSC-RES and Prof. Enrique Orti for computational resources and Belen Lerma-Berlanga for technical help.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of Linker Distribution in the Photocatalytic Activity of Multivariate Mesoporous Crystals

  • Lerma-Berlanga, Belen
  • Ganivet, Carolina R.
  • Almora-Barrios, Neyvis
  • Tatay, Sergio
  • Peng, Yong
  • Fabelo, Oscar
  • Gonzalez-Platas, Javier
  • Padial, Natalia M.
  • Marti-Gastaldo, Carlos
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The use of Metal-Organic Frameworks as crystalline matrices for the synthesis of multiple component or multivariate solids by the combination of different linkers into a single material has emerged as a versatile route to tailor the properties of single-component phases or even access new functions. This approach is particularly relevant for Zr-6-MOFs due to the synthetic flexibility of this inorganic node. However, the majority of materials are isolated as polycrystalline solids, which are not ideal to decipher the spatial arrangement of parent and exchanged linkers for the formation of homogeneous structures or heterogeneous domains across the solid. Here we use high-throughput methodologies to optimize the synthesis of single crystals of UiO-68 and UiO-68-TZDC, a photoactive analogue based on a tetrazine dicarboxylic derivative. The analysis of the single linker phases reveals the necessity of combining both linkers to produce multivariate frameworks that combine efficient light sensitization, chemical stability, and porosity, all relevant to photocatalysis. We use solvent-assisted linker exchange reactions to produce a family of UiO-68-TZDC(%) binary frameworks, which respect the integrity and morphology of the original crystals. Our results suggest that the concentration of TZDC in solution and the reaction time control the distribution of this linker in the sibling crystals for a uniform mixture or the formation of core-shell domains. We also demonstrate how the possibility of generating an asymmetric distribution of both linkers has a negligible effect on the electronic structure and optical band gap of the solids but controls their performance for drastic changes in the photocatalytic activity toward proton or methyl viologen reduction., This work was supported by the EU (ERC Stg Chem-fs-MOF 714122) and Spanish government (CTQ2017-83486-P, RTI2018-098568-A-I00, RYC-2016-1981, CEX2019-000919M, PID2019-106383GB-C44/AEI/10.13039/501100011033 and RTI2018-098568-A-I00). B.L.-B. thanks the Spanish government for a FPU (FPU16/04162). S.T. thanks the Spanish government for a Ramo ' n y Cajal Fellowship (RYC2016-60719817). N.M.P. thanks the European Union for a Marie Sklodowska-Curie Global Fellowship (H2020-MSCAIF-2016-GF-749359-EnanSET). J.G.P. thanks to the SIDIX at Servicios Generales de Apoyo a la Investigacion (SEGAI) at La Laguna University. We also thank BSC-RES for computational resources (QS-2020-2-0024) and the University of Valencia for research facilities (Tirant and NANBIOSIS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Chemical Engineering of Photoactivity in Heterometallic Titanium-Organic Frameworks by Metal Doping

  • Castells-Gil, Javier
  • Padial, Natalia M.
  • Almora-Barrios, Neyvis
  • Ruiz-Salvador, A. Rabdel
  • Gonzalez-Platas, Javier
  • Marti-Gastaldo, Carlos
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] We report a new family of titanium-organic frameworks that enlarges the limited number of crystalline, porous materials available for this metal. They are chemically robust and can be prepared as single crystals at multi-gram scale from multiple precursors. Their heterometallic structure enables engineering of their photoactivity by metal doping rather than by linker functionalization. Compared to other methodologies based on the post-synthetic metallation of MOFs, our approach is well-fitted for controlling the positioning of dopants at an atomic level to gain more precise control over the band-gap and electronic properties of the porous solid. Changes in the band-gap are also rationalized with computational modelling and experimentally confirmed by photocatalytic H-2 production., This work was supported by the EU (ERC Stg Chem-fs-MOF 714122) and Spanish MINECO (MDM-2015-0538, MAT2016-75586-C4-4-P & CTQ2017-83486-P). C.M.-G. and J.C.-G. thank the Spanish MINECO for a Ramon y Cajal Fellowship and FPI Scholarship (CTQ2014-59209-P), respectively. N.M.P. thanks the Junta de Andalucia for post-doctoral fellowship (P10-FQM-6050). BSC-RES and UG-Alhambra are acknowledged for the computational resources and F. Lloret for helpful discussions.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Guest induced reversible on¿off switching of elastic frustration in a 3D spin crossover coordination polymer with room temperature hysteretic behaviour

  • Piñeiro-López, Lucía
  • Valverde-Muñoz, Francisco Javier
  • Trzop, Elzbieta
  • Seredyuk, Maksym
  • Castells-Gil, Javier
  • da Silva, Iván
  • Marti-Gastaldo, Carlos
  • Collet, Eric
  • Real, José Antonio
  • Muñoz Roca, María Del Carmen|||0000-0003-2630-3897
[EN] A binary reversible switch between low-temperature multi-step spin crossover (SCO), through the evolution of the population gamma(HS)(T) with high-spin (HS)-low-spin (LS) sequence: HS1LS0 (state 1) <-> HS2/3LS1/3 (state 2) <-> HS1/2LS1/2 (state 3) <-> HS1/3LS2/3 (state 4) <-> HS0LS1 (state 5), and complete one step hysteretic spin transition featuring 20 K wide thermal hysteresis centred at 290 K occurs in the three-dimensional (3D) Hofmann-type porous coordination polymer {Fe-II(3,8phen)[Au(CN)(2)](2)}center dot xPhNO(2) (3,8phen = 3,8-phenanthroline, PhNO2 = nitrobenzene), made up of two identical interpenetrated pcu-type frameworks. The included PhNO2 guest (x = 1, 1 center dot PhNO2) acts as a molecular wedge between the interpenetrated 3D frameworks via PhNO2-3,8phen intermolecular recognition and is the source of the strong elastic frustration responsible for the multi-step regime. Detailed X-ray single crystal analysis reflects competition between spatial periodicities of structurally inequivalent HS and LS SCO centres featuring: (i) symmetry breaking (state 3) with MIDLINE HORIZONTAL ELLIPSISHS-LSMIDLINE HORIZONTAL ELLIPSIS ordering with gamma(HS) = 1/2; and (ii) occurrence of spatial modulation of the structure providing evidence for stabilization of local or aperiodic ordered mixed spin states for states 2 and 4 (with gamma(HS) approximate to 2/3) and 4 (with gamma(HS) approximate to 1/3), respectively. Below c.a. 20 K, structural and magnetic analyses show the photogeneration of a metastable HS*, state 6. The room-temperature single-step hysteretic regime appears with release of the guest (x = 0, 1) and the elastic frustration, and reversibly switches back to the original four-step behaviour upon guest re-adsorption. Both uncommon relevant SCO events meeting in the same material represent a rare opportunity to compare them in the frame of antiferro- and ferro-elastic transitions., This work was supported by the Spanish Ministerio de Economia y Competitividad (MINECO)/Ministerio de Ciencia e Innovacion FEDER (CTQ2016-78341-P/PID2019-106147GB-I00), Unidad de Excelencia Maria de Maeztu (CEX2019-000919-M), the Generalitat Valenciana through PROMETEO/2016/147 and an EU Framework Programme for Research and Innovation (RISE project number 734322). F. J. V. M. thanks MINECO for a predoctoral (FPI) grant. C. M. G. thanks the funding from the European Research Council (grant agreement No. 714122).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective Implantation of Diamines for Cooperative Catalysis in Isoreticular Heterometallic Titanium-Organic Frameworks

  • López-Maya, Elena
  • Padial, Natalia M.
  • Castells-Gil, Javier
  • Ganivet, Carolina R.
  • Rubio-Gaspar, Ana
  • García Cirujano, Francisco
  • Almora-Barrios, Neyvis
  • Tatay, Sergio
  • Marti-Gastaldo, Carlos
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] We introduce the first example of isoreticular titanium-organic frameworks, MUV-10 and MUV-12, to show how the different affinity of hard Ti(IV) and soft Ca(II) metal sites can be used to direct selective grafting of amines. This enables the combination of Lewis acid titanium centers and available -NH, sites in two sizeable pores for cooperative cycloaddition of CO2 to epoxides at room temperature and atmospheric pressure. The selective grafting of molecules to heterometallic clusters adds up to the pool of methodologies available for controlling the positioning and distribution of chemical functions in precise positions of the framework required for definitive control of pore chemistry., This work was supported by the EU (ERC Stg Chem-fs-MOF 714122) and Spanish Government (CTQ2017-83486-P, RTI2018-098568-A-I00 & CEX2019-000919-M). E.L.-M. and S.T. thanks the Spanish Government for their Juan de la Cierva Fellowship (FJCI-2017-32956) and Ramon y Cajal contract (RYC-2016-1981), respectively. A.R.G. acknowledges funding from Generalitat Valencia (ACIF/2020/090)and Fondo Social Europeo. N.M.P. thanks the European Union for a Marie Sklodowska-Curie Global Fellowship (H2020MSCA-IF-2016-GF-749359-EnanSET) and to the "2020 Postdoctoral Junior Leader-Retaining Fellowship, la Caixa Foundation (ID 100010434 and fellowship code LCF/BQ/PR20/11770014)". F.G.C. acknowledges the support of a fellowship from "la Caixa" Foundation (ID 100010434 and the fellowship code LCF/BQ/PI19/11690011). S.N. thanks financial support by the Ministerio de Ciencia, Innovacion y Universidades (RTI 2018-099482-A-I00 project), Fundacion Ramon Areces (XVIII Concurso Nacional para la Adjudicacion de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia, 2016) and Agencia Valenciana de la Innovacion (AVI-GVA, Carboagua project, INNEST/2020/111).
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

A Crystalline 1D Dynamic Covalent Polymer

  • de Bolòs Sánchez, Elisabet
  • Martínez Abadía, Marta
  • Hernández Culebras, Félix
  • Haymaker, Alison
  • Swain, Kyle
  • Strutynski, Karol
  • Weare, Benjamin L.
  • Castells Gil, Javier
  • Muñoz Padial, Natalia
  • Martí Gastaldo, Carlos
  • Khlobystov, Andrei N.
  • Saeki, Akinori
  • Melle Franco, Manuel
  • Nannenga, Brent L.
  • Mateo Alonso, Aurelio
The synthesis of crystalline one-dimensional polymers provides a fundamental understanding about the structure??? property relationship in polymeric materials and allows the preparation of materials with enhanced thermal, mechanical, and conducting properties. However, the synthesis of crystalline one-dimensional polymers remains a challenge because polymers tend to adopt amorphous or semicrystalline phases. Herein, we report the synthesis of a crystalline one-dimensional polymer in solution by dynamic covalent chemistry. The structure of the polymer has been unambiguously confirmed by microcrystal electron diffraction that together with charge transport studies and theoretical calculations show how the ir-stacked chains of the polymer generate optimal channels for charge transport., This work was carried out with support from the Basque Science Foundation for Science (Ikerbasque) , POLYMAT, the University of the Basque Country, Diputaci?n de Guipu ? zcoa, Gobierno Vasco (PIBA_2022_1_0031 and BERC program) , Generalitat Valenciana (PROMETEU/2021/054) and Go- bierno de Espan ? a (Projects CEX2020-001067-M, PID2021- 124484OB-I00,PID2020-118117RB-I00 and CEX2019- 0 0 0 9 1 9-M financed by MCIN/AEI/10.13039/501100011033) . Project (PCI2022-132921) funded by the Agencia Estatal de Investigaci?n through the PCI 2022 and M- ERA.NET 2021 calls. Technical and human support provided by SGIker of UPV/EHU and European funding (ERDF and ESF) is acknowledged. This project has received funding from the European Research Council (ERC) under the European Union?s Horizon 2020 research and innovation program (Grant Agreement No. 722951 and 714122) . This project has received funding from the European Union?s Horizon 2020 research and innovation program under grant agreement No. 899895. This work was funded by the ? uropean Union under the Horizon Europe grant 101046231. This project has received support from the National Institutes of Health (R21GM135784) and the use of the Titan Krios within the Eyring Materials Center at Arizona State University (NSF DBI 1531991) . Support through project IF/00894/2015 and within the scope of the project CICECO-Aveiro Institute of Materials, UIDB/50011/2020, UIDP/50011/2020 & LA/P/0006/2020, financed by national funds through the FCT/MEC (PID- DAC) , is gratefully acknowledged. We thank the Nanoscale and Microscale Research Centre (nmRC) , University of Nottingham, for access to EM instrumentation. N.M.P. thanks La Caixa Foundation for a Postdoctoral Junior Leader - Retaining Fellowship (ID 100010434 and fellowship code LCF/BQ/PR20/11770014) .
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

An Expanded 2D Fused Aromatic Network with 90-Ring Hexagons

  • Riaño, Alberto
  • Strutynski, Karol
  • Liu, Meng
  • Stoppiello, Craig T.
  • Lerma Berlanga, Belén
  • Saeki, Akinori
  • Martí Gastaldo, Carlos
  • Khlobystov, Andrei N.
  • Valenti, Giovanni
  • Paolucci, Francesco
  • Melle Franco, Manuel
  • Mateo Alonso, Aurelio
[EN]Two-dimensional fused aromatic networks (2D FANs) have emerged as a highly versatile alternative to holey graphene. The synthesis of 2D FANs with increasingly larger lattice dimensions will enable new application perspectives. However, the synthesis of larger analogues is mostly limited by lack of appropriate monomers and methods. Herein, we describe the synthesis, characterisation and properties of an expanded 2D FAN with 90-ring hexagons, which exceed the largest 2D FAN lattices reported to date., This work was carried out with support from the Basque Science Foundation for Science (Ikerbasque),POLYMAT, the University of the Basque Country,Gobierno Vasco (BERC programme) and Gobierno de España (Ministerio de Economía y Competitividad CTQ2016-77970-R).This work was performed under the Maria de Maeztu Units of Excellence Programme–Grant No.CEX-2019-000919-M Ministry of Science, nnovation and Universities.Technica land human support provided by SGIker of UPV/EHU and European funding (ERDFand ESF) is acknowledged.This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (GrantAgreementsNo.722951andNo.714122).This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreements No.664878 and No.899895. In addition,support through the project IF/00894/2015,the advanced computing project CPCA/A2/2524/2020 granting access to the Navigator cluster at LCA-UC and within the scope of the project CICECO-Aveiro Institute of Materials,UIDB/50011/2020&UIDP/50011/2020 funded by national fund sthrough thePortuguese Foundation for Science andTechnologyI. P./MCTES is gratefully acknowl-edged.The Nanoscale & Microscale Research Centre (nmRC), University of Nottingham,is acknowledged fore nabling access to electron microscopy facilities.
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

A Wavy Two-Dimensional Covalent Organic Framework from Core- Twisted Polycyclic Aromatic Hydrocarbons

  • Martínez Abadía, Marta
  • Stoppiello, Craig T.
  • Strutynski, Karol
  • Lerma Berlanga, Belén
  • Martí Gastaldo, Carlos
  • Saeki, Akinori
  • Melle Franco, Manuel
  • Mateo Alonso, Aurelio
A high degree of crystallinity is an essential aspect in two-dimensional covalent organic frameworks, as many properties depend strongly on the structural arrangement of the different layers and their constituents. We introduce herein a new design strategy based on core-twisted polycyclic aromatic hydrocarbon as rigid nodes that give rise to a two-dimensional covalent organic framework with a wavy honeycomb (chairlike) lattice. The concave–convex self-complementarity of the wavy two-dimensional lattice guides the stacking of framework layers into a highly stable and ordered covalent organic framework that allows a full 3D analysis by transmission electron microscopy revealing its chairlike honeycomb facets and aligned mesoporous channels. Remarkably, the waviness of the framework does not disrupt the interlayer π–π stacking that shows charge transporting properties similar to those of planar covalent organic frameworks. The implementation of core-twisted aromatics as building blocks for covalent organic frameworks brings new possibilities in the design of highly ordered organic materials., M.M.-A. and A.M.-A. acknowledge support of the Basque Science Foundation for Science (Ikerbasque), POLYMAT, the University of the Basque Country (Grupo de Investigación GIU17/054 and SGIker), Diputación Foral de Guipúzcoa (OF215/2016(ES)), Gobierno Vasco (BERC program), and Gobierno de España (Ministerio de Economía y Competitividad CTQ2016-77970-R). M.M.-F. acknowledges support from the Portuguese Foundation for Science and Technology (FCT), under the projects PTDC/FIS-NAN/4662/2014, IF/00894/2015, and FCT ref. UID/CTM/50011/2019 for CICECO - Aveiro Institute of Materials. This project has received funding from the European Union’s Horizon 2020 research and innovation programme under grant agreement no. 664878. This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement nos. 722951 and 714122).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface functionalization of metal–organic framework crystals with catechol coatings for enhanced moisture tolerance

  • Castells-Gil, Javier
  • Novio, Fernando
  • Padial, Natalia M.
  • Tatay, Sergio
  • Ruiz Molina, Daniel
  • Martí-Gastaldo, Carlos
Robust catechol coatings for enhanced moisture tolerance were produced in one step by direct reaction of Hong Kong University of Science and Technology (HKUST) with synthetic catechols. We ascribe the rapid formation of homogeneous coatings around the metal–organic framework particles to the biomimetic catalytic activity of Cu(II) dimers in the external surface of the crystals. Use of fluorinated catechols results in hydrophobic, permeable coatings that protect HKUST from water degradation while retaining close to 100% of its original sorption capacity., This work was supported by the EU (ERC Stg Chem-fs-MOF 714122), Spanish MINECO (Unit of Excellence Maria de Maeztu MDM-2015-0538), and the Generalitat Valenciana (Grant GV/2016/137). C.M.-G. and J.C.-G. thank the Spanish MINECO for a Ramon y Cajal Fellowship and FPI Scholarship (CTQ2014-59209-P), respectively. N.M.P. thanks the Junta de Andalucia for postdoctoral fellowship P10-FQM-6050. F.N. and D.R.M. are also grateful to the financial support offered by Project MAT2015-70615-R from the Spanish Government and by FEDER funds. The ICN2 is funded by the CERCA programme/Generalitat de Catalunya and supported by the Severo Ochoa programme of the Spanish Ministry of Economy, Industry and Competitiveness (MINECO, grant no. SEV-2013-0295)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Linker Distribution in the Photocatalytic Activity of Multivariate Mesoporous Crystals

  • Lerma-Berlanga, Belén
  • Ganivet, Carolina R.
  • Almora-Barrios, N.
  • Tatay, Sergio
  • Peng, Y.
  • Albero, J.
  • Fabelo, Oscar
  • González-Platas, Javier
  • García Gómez, Hermenegildo
  • Padial, Natalia M.
  • Martí-Gastaldo, Carlos
The use of Metal-Organic Frameworks as crystalline matrices for the synthesis of multiple component or multivariate solids by the combination of different linkers into a single material has emerged as a versatile route to tailor the properties of single-component phases or even access new functions. This approach is particularly relevant for Zr6-MOFs due to the synthetic flexibility of this inorganic node. However, the majority of materials are isolated as polycrystalline solids, which are not ideal to decipher the spatial arrangement of parent and exchanged linkers for the formation of homogeneous structures or heterogeneous domains across the solid. Here we use high-throughput methodologies to optimize the synthesis of single crystals of UiO-68 and UiO-68-TZDC, a photoactive analogue based on a tetrazine dicarboxylic derivative. The analysis of the single linker phases reveals the necessity of combining both linkers to produce multivariate frameworks that combine efficient light sensitization, chemical stability, and porosity, all relevant to photocatalysis. We use solvent-assisted linker exchange reactions to produce a family of UiO-68-TZDC% binary frameworks, which respect the integrity and morphology of the original crystals. Our results suggest that the concentration of TZDC in solution and the reaction time control the distribution of this linker in the sibling crystals for a uniform mixture or the formation of core-shell domains. We also demonstrate how the possibility of generating an asymmetric distribution of both linkers has a negligible effect on the electronic structure and optical band gap of the solids but controls their performance for drastic changes in the photocatalytic activity toward proton or methyl viologen reduction., This work was supported by the EU (ERC Stg Chem-fs-MOF 714122) and Spanish government (CTQ2017-83486-P, RTI2018-098568-A-I00, RYC-2016-1981, CEX2019-000919-M, PID2019-106383GB-C44/AEI/10.13039/501100011033 and RTI2018-098568-A-I00). B.L.-B. thanks the Spanish government for a FPU (FPU16/04162). S.T. thanks the Spanish government for a Ramón y Cajal Fellowship (RYC-2016-60719817). N.M.P. thanks the European Union for a Marie Skłodowska-Curie Global Fellowship (H2020-MSCA-IF-2016-GF-749359-EnanSET). J.G.P. thanks to the SIDIX at Servicios Generales de Apoyo a la Investigación (SEGAI) at La Laguna University. We also thank BSC-RES for computational resources (QS-2020-2-0024) and the University of Valencia for research facilities (Tirant and NANBIOSIS)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Surface functionalization of metal-organic frameworks for improved moisture resistance

  • Castells Gil, Javier
  • Novio, Fernando|||0000-0002-1517-3612
  • Padial, Natalia M.|||0000-0001-6067-3360
  • Tatay, Sergio|||0000-0003-0785-866X
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Martí Gastaldo, Carlos
Metal-organic frameworks (MOFs) are a class of porous inorganic materials with promising properties in gas storage and separation, catalysis and sensing. However, the main issue limiting their applicability is their poor stability in humid conditions. The common methods to overcome this problem involve the formation of strong metal-linker bonds by using highly charged metals, which is limited to a number of structures, the introduction of alkylic groups to the framework by post-synthetic modification (PSM) or chemical vapour deposition (CVD) to enhance overall hydrophobicity of the framework. These last two usually provoke a drastic reduction of the porosity of the material. These strategies do not permit to exploit the properties of the MOF already available and it is imperative to find new methods to enhance the stability of MOFs in water while keeping their properties intact. Herein, we report a novel method to enhance the water stability of MOF crystals featuring Cu(OC) paddlewheel units, such as HKUST (where HKUST stands for Hong Kong University of Science & Technology), with the catechols functionalized with alkyl and fluoro-alkyl chains. By taking advantage of the unsaturated metal sites and the catalytic catecholase-like activity of Cu ions, we are able to create robust hydrophobic coatings through the oxidation and subsequent polymerization of the catechol units on the surface of the crystals under anaerobic and water-free conditions without disrupting the underlying structure of the framework. This approach not only affords the material with improved water stability but also provides control over the function of the protective coating, which enables the development of functional coatings for the adsorption and separations of volatile organic compounds. We are confident that this approach could also be extended to other unstable MOFs featuring open metal sites.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Surface Functionalization of Metal-Organic Framework Crystals with Catechol Coatings for Enhanced Moisture Tolerance

  • Castells Gil, Javier
  • Novio, Fernando|||0000-0002-1517-3612
  • Padial, Natalia M.|||0000-0001-6067-3360
  • Tatay, Sergio|||0000-0003-0785-866X
  • Ruiz-Molina, Daniel|||0000-0002-6844-8421
  • Martí Gastaldo, Carlos
Robust catechol coatings for enhanced moisture tolerance were produced in one step by direct reaction of Hong Kong University of Science and Technology (HKUST) with synthetic catechols. We ascribe the rapid formation of homogeneous coatings around the metal-organic framework particles to the biomimetic catalytic activity of Cu(II) dimers in the external surface of the crystals. Use of fluorinated catechols results in hydrophobic, permeable coatings that protect HKUST from water degradation while retaining close to 100% of its original sorption capacity.