Pasar al contenido principal

HETEROUNIONES DE GRAFENO CON CONFIGURACION CONTROLADA. SINTESIS Y APLICACIONES COMO SOPORTE EN CATALISIS Y EN ELECTRODOS

RTI2018-098237-B-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 75
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tuning the Photocatalytic Activity of Ti-Based Metal-Organic Frameworks through Modulator Defect-Engineered Functionalization

  • Abánades Lázaro, Isabel
  • Szalad, Horatiu
  • Valiente, Pablo
  • Martí-Gastaldo, Carlos
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Defect engineering is a valuable tool to tune the photocatalytic activity of metal-organic frameworks (MOFs). Inducing defects through the attachment of functionalized modulators can introduce cooperative units that can tune the bandgap of the material and enhance their chemical, thermal, and photostabilities among other properties. However, the majority of defect engineering studies for photocatalytic applications are limited to Zr-based MOFs, and there is still a lack of interrelation between synthetic variables, the resultant MOF properties, and their effect on their photocatalytic performance. We report a comprehensive study on the defect engineering of the titanium heterometallic MOF MW-10 by fluoro- and hydroxy-isophthalic acid (Iso) modulators, rationalizing the effect of the materials' properties on their photocatalytic activity for hydrogen production. The Iso-OH modified MOFs present a volcano-type profile with a 2.3-fold increase in comparison to the pristine materials, whereas the Iso-F modified samples have a gradual increase with up to a 4.2-fold enhancement. It has been demonstrated that similar to 9% of Iso-OH modulator incorporation produces similar to 40% defects, inducing band gap reduction and longer excited states lifetime. Similar defect percentages have been generated upon near 40% Iso-F modulator incorporation; however, negligible band gap changes and shorter excited states lifetimes were determined. The higher photocatalytic activity in Iso-F modulator derived MOF has been attributed to the effect of the divergent defect-compensation modes on the materials' photostability and to the increase in the external surface area upon introduction of Iso-F modulator., This publication is part of a project that has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska (Grant Agreement No. 837804, DefTiMOFs, MSCA-IF-2018). I.A.L. thanks the European Union's Horizon 2020 research and innovation programme for the receipt of Marie Sklodowska-Curie Actions Individual Fellowship and thanks The University of Valencia and Functional Materials Research Group for research facilities and the Maria de Maeztu Units of Excellence Programme (CEX-2019-000919-M). H.S. also thanks the European Union's Horizon 2020 research and innovation programme Solar2Chem, under the Marie Sklodowska-Curie Grant Agreement No. 861151. H.G. and J.A. acknowledge financial support by the Spanish Ministry of Science and Innovation (RTI2018-98237-CO2-1) and Generalitat Valenciana (Prometeo 2017-083).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MIL-101(Cr)-NO2 as efficient catalyst for the aerobic oxidation of thiophenols and the oxidative desulfurization of dibenzothiophenes

  • Vallés-García, Cristina
  • Santiago-Portillo, Andrea
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] A series of MIL-101(Cr)-X functionalized with electron withdrawing (NO2, SO3H or Cl) or electron donor (NH2 or CH3) groups has been tested for the solvent-free oxidative coupling of thiophenol to disulfides. No byproducts were observed. A relationship between the catalytic activity of these MOFs with the substituent meta Hammet constant on the terephthalate ligand and with their redox potential was found, MIL-101(Cr)-NO2 being the most active catalyst. NO2-substituted MIL-101 is also more efficient than the parent MIL-101(Cr) to promote the aerobic desulfurization of dibenzothiophenes in n-dodecane or commercial Diesel as solvent. No byproduct formation was observed. Mechanistic studies reveal that MIL-101(Cr)-NO2 is acting as heterogeneous catalyst in thiophenol oxidation and as radical initiator for the aerobic desulfurization. For both reactions, the catalyst can be reused without deactivation, maintaining its crystallinity and with negligible metal leaching., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-098237-CO21) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. S.N. thanks financial support by the Fundacion Ramon Areces (XVIII Concurso Nacional para la Adjudicacion de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia, 2016), Ministerio de Ciencia, Innovacion y Universidades CTQ-2018 RTI2018-099482-A-I00 project and Generalitat Valenciana grupos de investigacion consolidables 2019 (AICO2019/214 project).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Encapsulation of Metal Nanoparticles within Metal¿Organic Frameworks for the Reduction of Nitro Compounds

  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Nitro group reduction is a reaction of a considerable importance for the preparation of bulk chemicals and in organic synthesis. There are reports in the literature showing that incorporation of metal nanoparticles (MNPs) inside metal-organic frameworks (MOFs) is a suitable strategy to develop catalysts for these reactions. Some of the examples reported in the literature have shown activity data confirming the superior performance of MNPs inside MOFs. In the present review, the existing literature reports have been grouped depending on whether these MNPs correspond to a single metal or they are alloys. The final section of this review summarizes the state of the art and forecasts future developments in the field., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-098237-CO21) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. S.N. is thankful for financial support by the Fundacion Ramon Areces (XVIII Concurso Nacional para la Adjudicacion de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia, 2016) and Ministerio de Ciencia, Innovacion y Universidades CTQ-2018 RTI2018-099482-A-I00 project. AD also thanks the Science Engineering Research Board, India, for the financial support through Extra Mural Research Funding (EMR/2016/006500).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nanometer-thick defective graphene films decorated with oriented ruthenium nanoparticles. Higher activity of 101 vs 002 plane for silane- alcohol coupling and hydrogen transfer reduction

  • Anouar, Aicha
  • Ramírez-Grau, Rubén
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Katir, Nadia
  • Franconetti, Antonio
  • El Kadib, Abdelkrim
[EN] Pyrolysis of ammonium alginate films containing Ru(NH3)(6)Cl-3 leads to the formation of Ru nanoparticles (NPs) supported on defective graphene films. The procedure allows controlling the preferential facet orientation of small Ru NPs (5-20 nm), either 002 when the pyrolysis is carried out under Ar atmosphere or the 002 and 101 planes for pyrolysis in the presence of H2. Ru is a metal difficult to prepare in preferential facet orientation compared to noble metals due to its higher reactivity and smaller particle size. Theoretical calculations substantiated the inhibition of Ru(0 0 2) growth by H-2 adsorption, with restructuration to Ru(002-101) NPs. The defective graphene films of about 15 nm thickness containing one of the two types of Ru NPs (150 ng/cm(2)) exhibit distinctive catalytic activity for the dehydrogenative coupling of silanes and alcohols and hydrogen transfer reduction of cyclohexanone. Comparison of turnover frequencies indicates that the 101 facet is more efficient than the 002 plane. Overall, this study illustrates that pyrolysis conditions can control the preferential crystallographic orientation of the growing Ru NPs and the relative catalytic activity of their specific crystallographic planes., Support by the Ministerio de Ciencia e Innovacion (Severo Ochoa and RTI2018-098237-B-C21) and Generalitat Valenciana (Prome-teo 2017/083) is acknowledged. Thanks are due to Galicia Super-computing Center. AA thanks UEMF and UPV for an Erasmus + 2019-1-ES01-KA107-062073 Scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bifunctional metal-organic frameworks for the hydrogenation of nitrophenol using methanol as the hydrogen source

  • Melillo, Arianna
  • Ferrer Ribera, Rosa Belén
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • García-Vallés, Cristina
[EN] This work reports the reduction of 4-nitrophenol to 4-aminophenol using UiO-66(Zr) as a bifunctional photocatalyst and hydrogenation catalyst using methanol as the hydrogen source. In particular, a series of UiO-66(Zr)-X (X: NH2, NO2 and H) and MIL-125(Ti)-NH2 catalysts have been screened as bifunctional catalysts for this process. UiO-66(Zr)-NH2 was found to be the most active material to promote light-assisted nitro hydrogenation under both UV-Vis and simulated sunlight irradiation. The tandem reaction occurs via hydrogen generation from a water/methanol mixture in the first step and, then, reduction of 4-nitrophenol to 4-aminophenol. UiO-66(Zr)-NH2 acts as a truly heterogeneous catalyst and can be reused several times without significant loss of activity, maintaining its crystallinity. This work shows the possibility of using MOFs as solar-driven bifunctional catalysts to promote the hydrogenation of organic compounds using methanol as the hydrogen source., S. N. acknowledges the financial support by the Fundacion Ramon Areces (XVIII Concurso Nacional para la Adjudicacion de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia, 2016), Ministerio de Ciencia, Innovacion y Universidades RTI 2018-099482-A-I00 project and Generalitat Valenciana grupos de investigacion consolidables 2019 (ref: AICO/2019/214) project. Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa and RTI2018-098237-B-C21) and Generalitat Valenciana (Prometeo 2017-083) is also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthetic Fuels from Biomass: Photocatalytic Hydrodecarboxylation of Octanoic Acid by Ni Nanoparticles Deposited on TiO2

  • Du, Xiangze
  • Peng, Yong
  • Li, Dan
  • Hu, Changwei
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Decarboxylation of low-value fatty acids from biomass is a simple process to produce synthetic fuels suitable to be blended with gasoline or diesel. The present study reports the photocatalytic decarboxylation of octanoic acid in the presence of H-2 by a series of modified TiO2 to form mixtures of n-heptane and tetradecane as major products in variable proportions, depending on the photocatalyst and the reaction conditions. It was found that the photocatalytic activity increases upon an optimal reductive NaBH4 treatment, presumably by generation of surface oxygen vacancies and by the deposition of Ni nanoparticles in the appropriate loading. Under the optimized conditions, an almost complete octanoic acid conversion and a combined selectivity to n-heptane and tetradecane over 80 % were reached at 10 h of UV/Vis light irradiation with a 300 W Xe lamp. No changes in the photocatalytic performance were observed for six consecutive runs. The present results illustrate the possibility that photocatalytic decarboxylation offers for the transformation of biomass into synthetic fuels under mild conditions., This work is financially supported by National Natural Science Foundation of China (No. 21972099), the Application Foundation Program of Sichuan Province (No. 2021YJ0305), and 111 project (No. B17030). Financial support by the Spanish Ministry of Science and innovation (RTI2018-98237-CO2-1) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. X. Du is also grateful for financial support from CSC (China Scholarship Council).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

All-carbon microporous graphitic photocatalyst-promoted reduction of CO2 to CO in the absence of metals or dopant elements

  • Garcia-Mulero, Ana
  • Asiri, Abdullah M
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Microporous graphitic carbon (mp-C) derived from the pyrolysis of alpha-, beta-, and gamma-cyclodextrins exhibited photocatalytic activity in CO2-saturated acetonitrile-water upon irradiation with UV-Vis light and in the presence of triethanolamine, forming H-2 (19 mu mol h(-1)) and CO (23 mu mol h(-1)) accompanied by a lesser proportion of CH4 (4 mu mol h(-1)). The most efficient was the mp-C material derived from alpha-cyclodextrin (mp-C-alpha) and having a pore dimension of 0.68 nm. The process also occured, although to a much lesser extent, under simulated sunlight or with UV-Vis irradiation in the absence of a sacrificial agent, with H2O being the electron donor. The origin of the CO was proved by isotopic C-13 labelling experiments. Photocurrent measurements proved the occurrence of charge separation and the increase in photocurrent intensity in the presence of CO2. Transient absorption spectroscopy was used to detect the charge separate state decay in the microsecond time scale and proved that a fraction of the photogenerated electrons were able to react with CO2., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa, PID-2021-12607OB-C21 and RTI2018-89237-CO2-1) and Generalitat Valenciana (Prometeo 2021/083) are gratefully acknowledged. A. G.-M. thanks the Spanish Ministry of Science and Innovation for a postgraduate scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Role of Defects on the Particle Size-Capacitance Relationship of Zn-Co Mixed Metal Oxide Supported on Heteroatom-Doped Graphenes as Supercapacitors

  • Hu, Hu Jiajun
  • Peng, Yong
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Supercapacitors are considered among the most promising electrical energy storage devices, there being a need to achieve the highest possible energy storage density. Herein small mixed Zn-Co metal oxide nanoparticles are grown on doped graphene (O-, N- and, B-doped graphenes). The electrochemical properties of the resulting mixed Zn-Co metal oxide nanoparticles (4 nm) grown on B-doped graphene exhibit an outstanding specific capacitance of 2568 F g-1 at 2 A g-1 , ranking this B-doped graphene composite among the best performing electrodes. The energy storage capacity is also remarkable even at large current densities (i.e., 640 F g-1 at 40 A g-1 ). In contrast, larger nanoparticles are obtained using N- and O-doped graphenes as support, the resulting materials exhibiting lower performance. Besides energy storage, the Zn-Co oxide on B-doped graphene shows notable electrochemical performance and stability obtaining a maximum energy density of 77.6 W h Kg-1 at 850 W Kg-1 , a power density of 8500 W Kg-1 at 28.3 W h Kg-1 , and a capacitance retention higher than 85% after 5000 cycles. The smaller nanoparticle size and improved electrochemical performance on B-doped graphene-based devices are attributed to the higher defect density and nature of the dopant element on graphene., The authors gratefully acknowledge the financial support by the "MCIN/AEI/10.13039/501100011033/, the FEDER funds (PDI2021-126071-OB-C21)", the Generalitat Valenciana (Prometeo 2021-038), and the European Union project H2020-LC-CS3-2020-RES-RIA "Eco2Fuel"(grant agreement 101006701). J.H. thanks the Chinese Scholarship Council for doctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photocatalytic Water Splitting Promoted by 2D and 3D Porphyrin Covalent Organic Polymers Synthesized by Suzuki-Miyaura Carbon-Carbon Coupling

  • Nóvoa-Cid, María
  • Melillo, Arianna
  • Ferrer Ribera, Rosa Belén
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • Garcia-Baldovi, Hermenegildo
[EN] This work deals with the synthesis of metal-free and porphyrin-based covalent organic polymers (COPs) by the Suzuki-Miyaura coupling carbon-carbon bond forming reaction to study the photocatalytic overall water splitting performance. Apart from using 5,10,15,20-Tetrakis-(4-bromophenyl)porphyrin, we have chosen different cross-linker monomers to induce 2-dimensional (2D) or 3-dimensional (3D) and different rigidity in their resulting polymeric molecular structure. The synthesised COPs were extensively characterised to reveal that the dimensionality and flexibility of the molecular structure play an intense role in the physical, photochemical, and electronic properties of the polymers. Photoinduced excited state of the COPs was evaluated by nanosecond time-resolved laser transient absorption spectroscopy (TAS) by analysing excited state kinetics and quenching experiments, photocurrent density measurements and photocatalytic deposition of Ru3+ to RuO2, and photocatalysis. In summary, TAS experiments demonstrated that the transient excited state of these polymers has two decay kinetics and exhibit strong interaction with water molecules. Moreover, photocurrent and photocatalytic deposition experiments proved that charges are photoinduced and are found across the COP molecular network, but more important charges can migrate from the surface of the COP to the medium. Among the various COPs tested, COP-3 that has a flexible and 3D molecular structure reached the best photocatalytic performances, achieving a photocatalytic yield of 0.4 mmol H-2 x g(COP-3)(-1) after 3 h irradiation., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa with grant code RTI2018-098237-CO21), Generalitat Valenciana (Prometeo 2017/083) and European Union [APOSTD2018/216] are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synthesis of metal-free lightweight materials with sequence-encoded properties

  • Azoulay, Adi
  • Barrio, Jesús
  • Tzadikov, Jonathan
  • Volokh, Michael
  • Gervais, Christel
  • Amo-Ochoa, Pilar
  • Zamora, Félix
  • Shalom, Menny
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] A high-temperature solid-state synthesis is a widespread tool for the construction of metal-free materials, owing to its simplicity and scalability. However, no method is currently available for the synthesis of metal-free materials, which enables control over the atomic ratio and spatial organization of several heteroatoms. Here we report a general and large-scale synthesis of phosphorus-nitrogen-carbon (PNC) materials with highly controllable elemental composition and structural, electronic, and thermal stability properties. To do so, we designed four different crystals consisting of melamine and phosphoric acid with different monomers sequences as the starting precursors. The monomer sequence of the crystals is preserved upon calcination (up to 800 degrees C) to an unprecedented degree, which leads to precise control over the composition of the final PNC materials. The latter exhibit a remarkable stability up to 970 degrees C in air, positioning them as sustainable, lightweight supports for catalysts in high-temperature reactions as well as halogen-free fire-retardant materials., The authors would like to thank Dr Volodiya Ezersky, Dr Natalya Froumin, Dr Anna Milionshchik, Dr Radion Vainer, Dr Einat Nativ-Roth, and Mr Nitzan Shauloff for analytical HRTEM, XPS, TGA, SC-XRD, HRSEM, and technical support, respectively. This research was partly funded by the following: the Planning & Budgeting Committee/Israel Council for Higher Education (CHE) and Fuel Choice Initiative (Prime Minister Office of Israel), within the framework of "Israel National Research Center for Electrochemical Propulsion" (INREP); the Minerva Center No. 117873; the Spanish Ministerio de Economia y Competitividad (MAT2016-77608-C3-1-P, MAT2016-75883-C2-2-P); J. A. and H. G. also gratefully acknowledges financial support from the Spanish Ministry of Economy and Competitiveness (Severo Ochoa SEV2016-0683 and RTI2018-89023-CO2-R1) and by the Generalitat Valenciana (Prometeo 2017-083). This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (grant agreement No. [849068]). NMR spectroscopic calculations were performed using HPC resources from GENCI-IDRIS (Grant 097535). The French Region Ile de France-SESAME program is acknowledged for financial support (700 MHz spectrometer).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microporous 3D graphitic carbons obtained by soft templating as carbocatalysts for aerobic oxidation

  • Garcia-Mulero, Ana
  • Dhakshinamoorthy, Amarajothi
  • Garcia-Baldovi, Hermenegildo
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Corma Canós, Avelino|||0000-0002-2232-3527
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Herein it is reported that chitosan, a natural filmogenic biopolymer, can undergo soft-templating in liquid phase under hydrothermal conditions by two typical structure directing agents, namely hexamethyleneimine (HMI) and tetraethylammonium (TEA) employed in the synthesis of zeolites MCM-22 and Beta, respectively. After templation, pyrolysis of chitosan under inert atmosphere renders 3D graphitic sponges with defined ultra- and microporous channels. These porous structured graphitic carbons exhibit much enhanced activity as metal-free catalyst in the aerobic oxidation of benzylamine compared to other analogous 2D graphene oxide and reduced graphene oxide, as well as large area active carbons. It is proposed that this superior activity of these 3D structured microporous carbons derives from confinement effects activating molecular oxygen and benzylamine within the micropores. Quenching studies indicate that the reactive oxygen species are mostly adsorbed within the pores of the 3D graphitic carbons, Financial support by the Spanish Ministry of Science and Innovation (RTI2018-098237-CO2-R1 and Severo Ochoa) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. H.G.B. and A.P. thank the Generalitat Valenciana and Spanish Ministry of Science and Innovation for their research associate contracts. A.G.M. thanks the Spanish Ministry of Science and Innovation for the scholarship FPU18/02706. A.D. thanks University Grants Commission for awarding Assistant Professorship under the Faculty recharge program
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal-Organic Framework Derived Bimetallic Materials for Electrochemical Energy Storage

  • Sanati, Soheila
  • Abazari, Reza
  • Morsali, Ali
  • Liang, Zibin
  • Zou, Ruqiang
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Supercapacitors (SCs), showing excellent power density, long service life, and high reversibility, have received great attention because of the increasing demand for energy storage devices. To further improve their performance, it is essential to develop advanced electrode materials. One group of materials, porous crystalline solids referred to as metal-organic frameworks (MOFs), have proved to be excellent templates for synthesizing functional materials to be employed in the preparation of electrodes for SCs. In comparison to monometallic MOFs, bimetallic MOFs and their derivatives offer a number of advantages, including tunable electrochemical activity, high charge capacity, and improved electrical conductivity. This review focuses on the use of MOF-derived bimetallic materials in SCs, the origin of the improved performance, and the latest developments in the field. Furthermore, the challenges and perspectives in this research area are discussed., This work was supported by Tarbiat Modares University and College of Engineering, Peking University. Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-98237-CO2-1) and Generalitat Valenciana (Prometeo 2017-083) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Visible and NIR Light Assistance of the N2 Reduction to NH3 Catalyzed by Cs-promoted Ru Nanoparticles Supported on Strontium Titanate

  • Peng, Yong
  • Franconetti, Antonio
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • Concepción Heydorn, Patricia|||0000-0003-2058-3103
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] NH3 production accounts for more than 1% of the total CO2 emissions and is considered one of the most energy-intensive industrial processes currently (T > 400 degrees C and P > 80 bars). The development of atmospheric-pressure N2 fixation to NH3 under mild conditions is attracting much attention, especially using additional renewable energy sources. Herein, efficient photothermal NH3 evolution in continuous flow upon visible and NIR light irradiation at near 1 Sun power using Cs-decorated strontium titanate-supported Ru nanoparticles is reported. Notably, for the optimal photocatalytic composition, a constant NH3 rate near 3500 mu molNH3 gcatalyst-1 h-1 was achieved for 120 h reactions, being among the highest values reported at atmospheric pressure under 1 Sun irradiation., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-98237-CO2-1), Generalitat Valenciana (Prometeo 2017-083), and European Union's Horizon 2020 research and innovation programme under grant agreement no. 862453 is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Remarkable Activity of 002 Facet of Ruthenium Nanoparticles Grown on Graphene Films on the Photocatalytic CO2 Methanation

  • Anouar, Aicha
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • García-Aboal, Rocío
  • Franconetti, Antonio
  • Katir, Nadia
  • El Kadib, Abdelkrim
[EN] In the context of diminishing atmospheric CO2 emissions, there is an urgent need to develop processes that can be carried out at a scale commensurate with appropriate CO2 volumes. One possible reaction is the transformation of CO2 to methane (Sabatier reaction). Due to its chemical stability, catalytic CO2 hydrogenation to methane is carried out at temperatures of 450 degrees C or higher and pressures above 5 bars, thus, requiring a significant energy input. One alternative possibility to conventional thermal catalysis is the use of solar light as the primary energy, performing the photocatalytic CO2 hydrogenation. In this broad context, the present study shows the photocatalytic activity of nanometric films of oriented Ru nanoparticles (NPs) strongly grafted on defective graphene. These graphene films (thinner than 20 nm) containing Ru NPs nanoplatelets (less than 2 nanomol(Ru)/cm(2)) are among the most active photocatalysts ever prepared for CO2 hydrogenation and operate through photoinduced charge separation, Support by the Ministerio de Ciencia e Innovacion (Severo Ochoa and RTI2018-098237-B-C21) and Generalitat Valenciana (Prometeo 2017/083) was acknowledged. Thanks are due to Galicia Supercomputing Center. A.A. thanks UEMF (Euromed Unniversity Fes) and UPV for an Erasmus+ 2019-1-ES01-KA107-062073 Scholarship. A.P. thanks the Spanish Ministry for a Ramon y Cajal research associate contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Improved catalytic hydrogen release of quasi HKUST-1 compared to HKUST-1

  • Bagheri, Minoo
  • Masoomi, Mohammad Yaser
  • Melillo, Arianna
  • Ferrer Ribera, Rosa Belén
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] On-demand hydrogen release could be an important process for the transportation of fuel in the near future. Herein it is reported that the controlled thermolysis of HKUST-1 under optimal conditions generates structural defects resulting in a quasi-HKUST-1 material showing a 20-fold enhancement of the H-2 release turnover frequency at room temperature in the absence of a base, This work is based upon research funded by the Iran National Science Foundation (INSF) under project no. 4000089 and Spanish Ministry of Science and Innovation (Severo Ochoa and RTI201898237-CO2-1). Also, support for this investigation from Arak University is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

alpha,beta-Enone Borylation by Bis(Pinacolato)Diboron Catalyzed by Cu-3(BTC)(2) Using Cesium Carbonate as a Base

  • Dhakshinamoorthy, Amarajothi
  • Asiri, Abdullah M.
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Cu-3(BTC)(2) (BTC: 1,3,5-benzenetricarboxylate) as a heterogeneous catalyst in the presence of cesium carbonate as a base is reported for the borylation of alpha,beta-conjugated enones by bis(pinacolato)diboron (B(2)pin(2)). According to the hot-filtration test, Cu-3(BTC)(2) is acting as a heterogeneous catalyst. Further, Cu-3(BTC)(2) exhibits a wide substrate scope and can be reused in consecutive runs, maintaining a crystal structure as evidenced by powder X-ray diffraction (XRD). A suitable mechanism is also proposed for this transformation using Cu-3(BTC)(2) as catalyst., Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa and RTI2018-089231-CO2-R1) and Generalitat Va-lenciana (Prometeo 2017-083).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Wrapping up Metal-Organic Framework Crystals with Carbon Nanotubes

  • Lerma-Berlanga, Belén|||0000-0003-3686-8576
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Padial, Natalia M.
  • Galbiati, Marta
  • Brotons-Alcázar, Isaac
  • Forment-Aliaga, Alicia
  • Ganivet, Carolina R.
  • Marti-Gastaldo, Carlos
[EN] The presence of tetrazine units in the organic nodes of UiO-68-TZCD controls the formation of ultrathin coatings of single-wall nanotubes that decorate the surface of the crystal. These crystal hybrids can be prepared straightforwardly in one step and are extraordinarily respectful with the properties of the framework for combination of mesoporosity and surface areas approximate to 4.000 m(2) g(-1), with excellent stability in water, and conductivities at room temperature of 4 x 10(-2) S cm(-1) even at very low carbon weight contents (2.3 wt.%)., B.L.-B. and N.M.P. contributed equally to the work. This work was supported by the EU H2020 program (ERC-2021-COG-101043428 & ERC-2016-STG-714122), the Generalitat Valenciana (PROMETEU/2021/054 and SEJIGENT/2021/059) and the Spanish government (CEX2019-000919-M, PID2020-118117RB-I00 & EUR2021-121999). B.L.-B. thanks the Spanish government for an FPU (FPU16/04162). N.M.P. and M.G. thanks La Caixa Foundation for a Postdoctoral Junior Leader-Retaining Fellowship (ID 100010434 & ID 100010434 and fellowship code LCF/BQ/PR20/11770014 & LCF/BQ/PR21/11840011). The authors also thank the University of Valencia for its research facilities (NANBIOSIS). J.A. and H. G. are grateful to the Spanish Ministry of Science and Innovation (RTI2018-98237-CO2-1) and Generalitat Valenciana (Prometeo 2021-038) for the financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Turning Carbon Dioxide and Ethane into Ethanol by Solar-Driven Heterogeneous Photocatalysis over RuO2- and NiO-co-Doped SrTiO3

  • Paulista, Larissa O.
  • Martins, Ramiro J. E.
  • Boaventura, Rui A. R.
  • Vilar, Vítor J. P.
  • Silva, Tania F. C. V.
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The current work focused on the sunlight-driven thermo-photocatalytic reduction of carbon dioxide (CO2), the primary greenhouse gas, by ethane (C2H6), the second most abundant element in shale gas, aiming at the generation of ethanol (EtOH), a renewable fuel. To promote this process, a hybrid catalyst was prepared and properly characterized, comprising of strontium titanate (SrTiO3) co-doped with ruthenium oxide (RuO2) and nickel oxide (NiO). The photocatalytic activity towards EtOH production was assessed in batch-mode and at gas-phase, under the influence of different conditions: (i) dopant loading; (ii) temperature; (iii) optical radiation wavelength; (vi) consecutive uses; and (v) electron scavenger addition. From the results here obtained, it was found that: (i) the functionalization of the SrTiO3 with RuO2 and NiO allows the visible light harvest and narrows the band gap energy (ca. 14-20%); (ii) the selectivity towards EtOH depends on the presence of Ni and irradiation; (iii) the catalyst photoresponse is mainly due to the visible photons; (iv) the photocatalyst loses > 50% efficiency right after the 2nd use; (v) the reaction mechanism is based on the photogenerated electron-hole pair charge separation; and (vi) a maximum yield of 64 mu mol EtOH g(cat)(-1) was obtained after 45-min (85 mu mol EtOH g(cat)(-1) h(-1)) of simulated solar irradiation (1000 W m(-2)) at 200 degrees C, using 0.4 g L-1 of SrTiO3:RuO2:NiO (0.8 wt.% Ru) with [CO2]:[C2H6] and [Ru]:[Ni] molar ratios of 1:3 and 1:1, respectively. Notwithstanding, despite its exploratory nature, this study offers an alternative route to solar fuels' synthesis from the underutilized C2H6 and CO2., This work was financially supported by the Base Funding-UIDB/50020/2020 of the Associate Laboratory LSRE-LCM-funded by national funds through FCT/MCTES (PIDDAC). Larissa O. Paulista also wants to acknowledge for her doctoral fellowship (reference SFRH/BD/137639/2018), supported by FCT. Tania F. C. V. Silva and Vitor J. P. Vilar acknowledge the FCT Individual Call to Scientific Employment Stimulus 2017 (CEECIND/01386/2017 and CEECIND/01317/2017, respectively). Josep Albero and Hermenegildo Garcia are also grateful to the Spanish Ministry of Science and Innovation (RTI2018-098237-CO2-R1 and Severo Ochoa), Generalitat Valencia (Prometeo 2017/083) and European Union's Horizon 2020 research and innovation programme under grant agreement No 862453, project FlowPhotochem, by financial contribution.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synergistic effect of Cu and Fe small nanoparticles supported on porous N-doped graphitic framework for selective electrochemical CO2 reduction at low overpotential

  • Du, Xiangze
  • Peng, Lu
  • Hu, Jiajun
  • Peng, Yong
  • Li, Dan
  • Hu, Changwei
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Electrochemical CO2 reduction is an appealing approach to diminish CO2 emissions, while obtaining valuable chemicals and fuels from renewable electricity. However, efficient electrocatalysts exhibiting high selectivity and low operating potentials are still needed. Herein it is reported that Cu and Fe nanoparticles supported on porous N-doped graphitic carbon matrix are efficient and selective electrocatalysts for CO2 reduction to CO at low overpotentials. XRD and Raman spectroscopy confirmed independent Cu and Fe metals as the main phases. HRSEM and HRTEM images show the coral-like morphology of the porous N-doped graphitic carbon matrix supporting Cu and Fe metal nanoparticles (about 10 wt%) homogeneously distributed with an average size of 1.5 nm and narrow size distribution. At the optimum Fe/Cu ratio of 2, this material present high activity for CO2 reduction to CO at -0.3 V vs. RHE with a faradaic efficiency of 96%. Moreover, at -0.5 V vs. RHE this electrocatalyst produces 27.8 mmol of CO g(cat)(-1) h(-1), the production rate being stable for 17 h. A synergy between Cu and Fe nanoparticles due to their close proximity in comparison with independent Cu or Fe electrocatalysts was observed., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-89237-CO2-R1) and Generalitat Valenciana (Prometeo 2021/038) and European Union (ECO2Fuel) is gratefully acknowledged. X. D. thanks the Chinese Scholarship Council for financial support to his stay at Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Engineering Active Sites in Reduced Graphene Oxide: Tuning the Catalytic Activity for Aerobic Oxidation

  • Espinosa-López, Juan Carlos
  • Dhakshinamoorthy, Amarajothi
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The influence of the graphene oxide (GO) reduction method on the activity of the resulting reduced graphene oxide (rGO) for the aerobic oxidation of benzylamine is reported. Starting from GO obtained by the Hummers method, a series of rGO samples were obtained either by chemical (hydroquinone (HQ), hydrazine (HZ) or ascorbic acid (ASC)) or by thermal reduction were prepared. Analytical and spectroscopic techniques provide evidence showing that chemical reducing agents reduce GO with different functional groups that influence the catalytic activity of the resulting rGO for the activation of molecular oxygen in benzylamine oxidation. The highest activity in the aerobic oxidation of benzylamine at 80 degrees C was found for the rGO-HQ1 sample prepared using HQ as a reducing agent. It is proposed that HQ introduces hydroquinone/p-benzoquinone-like moieties on the graphene sheet that act as active sites in the oxidation reaction. This proposal is supported by the activity of HQand/or p-benzoquinone as organocatalysts and by selective masking of oxygen-functional groups present in the most active rGO sample. The most active rGO sample exhibited good reusability and stability in five consecutive uses. Selective quenching experiments revealed that hydroperoxyl radicals are the primary reactive oxygen species generated in the system., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-098237-CO21) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. S.N. thanks financial support by the Fundacion RamOn Areces (XVIII Concurso Nacional para la Adjudication de Ayudas a la Investigation en Ciencias de la Vida y de la Materia, 2016) and Ministerio de Ciencia, Innovation y Universidades RTI2018-099482-A-I00 project and Generalitat Valenciana (grupos de investigation consolidables 2019, AICO/2019/214). A.D. thanks the University Grants Commission, New Delhi, for the award of an Assistant Professorship under its Faculty Recharge Programme. A.D. also thanks the Department of Science and Technology, India, for the financial support through Extramural Research Funding (EMR/2016/006500).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Exploring the catalytic performance of a series of bimetallic MIL-100(Fe, Ni) MOFs

  • Giménez-Marqués, Mónica
  • Santiago-Portillo, Andrea
  • Briois, Valérie
  • Nouar, Farid
  • Serre, Christian
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] A series of mixed-metal Fe-III/Ni-II metal-organic frameworks (MOFs) of the MIL-100 type containing different metal ratios have been synthesized de novo, following an approach that requires tuning of the Fe-III/Ni-II reactivity. The resulting heterometallic MIL-100(Fe, Ni) materials maintain thermal, chemical and structural stability with respect to the parent MIL-100(Fe) MOF as can be deduced from various techniques. The nature and the oxidation state of the accessible metal cations have been evaluated by in situ infrared spectroscopy and extended X-ray absorption fine structure measurements. The obtained mixed-metal MOFs and the parent material have been evaluated as heterogeneous catalysts in a model acid-catalyzed reaction, i.e., the Prins reaction. It is found that the catalytic activity improves by more than one order of magnitude upon incorporation of Ni-II, with a complete selectivity for the formation of nopol. This increase in the catalytic activity upon incorporation of Ni-II correlates with the enhancement in the Lewis acidity of the material as determined by CO adsorption. The heterometallic MOF can be recycled without observation of metal leaching, while maintaining the crystal structure under the reaction conditions., This work was supported by the European Commission under the Marie Sklodowska-Curie agreement H2020-MSCA-IF-658224. Measurements at the ROCK synchrotron beamline of SOLEIL were supported by a public grant overseen by the French National Research Agency (ANR) as part of the "Investissements d'Avenir" program (reference: ANR10-EQPX45). H. G. thanks financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-098237-CO21) and Generalitat Valenciana (Prometeo 2017/083). S. N. thanks financial support by the Fundacion Ramon Areces (XVIII Concurso Nacional para la Adjudicacion de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia, 2016) and Ministerio de Ciencia, Innovacion y Universidades CTQ-2018 RTI2018-099482-A-I00 project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Co-Fe Clusters Supported on N-Doped Graphitic Carbon as Highly Selective Catalysts for Reverse Water Gas Shift Reaction

  • Peng, Lu
  • Jurca, Bogdan
  • Gordillo, Alvaro
  • Parvulescu, Vasile I.
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Graphitic carbons are suitable supports of metal nanoparticles with catalytic activity. In the present study, the preparation of N-doped graphitic carbon supporting clusters of Fe-Co alloys starting from biomass waste is reported. These sub-nanometric Co-Fe clusters supported on N-doped graphitic carbon at a metal loading below 0.2 wt % exhibit high activity for the selective hydrogenation of CO2 to CO. Operating at 500 degrees C and 10 bar with an H-2/CO2 molar ratio of 7 and a space velocity of 600 h(-1), a conversion of 56% with a selectivity of over 98% to CO, and remarkable stability over 30 h operation was obtained. Interestingly, analogous catalysts based on N-doped graphitic carbon with much higher Co-Fe loadings and an average particle size range of 1-5 nm exhibit only half of this activity, with similar CO selectivity. This contrasting behavior reveals the dramatic effect of the particle size on the catalytic activity. In comparison, SiO2 as support under similar conditions affords CH4 as the main product., Financial support by the Spanish Ministry of Science, Innovation, and University (Severo Ochoa and RTI2018.98237-B-CO1) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. L.P. thanks the Generalitat Valenciana for a Santiago Grisolia scholarship. BASF is thanked for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Increased photocatalytic activity and selectivity towards methane of trimetallic NiTiAl-LDH

  • Molina-Muriel, Manuel
  • Peng, Yong
  • Ribera, Antonio
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Layered double hydroxides is a rising family of materials with interesting photocatalytic properties that are starting to be employed on the CO2 photoreduction to useful chemicals. However, the selectivity control towards high energy value products, such as methane or methanol, is one of the main issues of this process due to the easier formation of CO, which requires fewer electrons to be transferred, and the competition of hydrogen evolution reaction. In this work, a new LDH material containing Ni, Ti and Al within the structure was synthesised with the purpose of increasing the selectivity towards methane production. The material was tested under solar simulator conditions, yielding a methane production of 148 mu mol g-1 h-1, with a selectivity of 86%, one of the highest values reported for this kind of material, while the competition from hydrogen evolution was almost suppressed. The role of Ti directing the selectivity towards methane was confirmed, since no CH4 was produced when NiAl-LDH catalyst was used instead., We thank the grant CTQ2017-87201-P, Severo Ochoa and RTI2018.98237-B-CO1 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe" for financial support. Generalitat Valenciana (Prometeo 2017/083 and Prometeo 2019/076) is also gratefully acknowledged. M.M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Quality Improvement of Few-Layers Defective Graphene from Biomass and Application for H-2 Generation

  • He, Jinbao
  • Anouar, Aicha
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Pyrolysis of filmogenic natural polymers gives rise to the formation of films of few-layers defective, undoped, and doped graphenes with low electrical conductivity (3000 to 5000 ohm /sq). For the sake of valorization of biomass wastes, it would be of interest to decrease the density of structural defects in order to increase the conductivity of the resulting few-layers graphene samples. In the present study, analytical and spectroscopic evidence is provided showing that by performing the pyrolysis at the optimal temperature (1100 degrees C), under a low percentage of H-2, a significant decrease in the density of defects related to the presence of residual oxygen can be achieved. This improvement in the quality of the resulting few-layers defective graphene is reflected in a decrease by a factor of about 3 or 5 for alginic acid and chitosan, respectively, of the electrical resistance. Under optimal conditions, few-layers defective graphene films with a resistance of 1000 ohm /sq were achieved. The electrode made of high-quality graphene prepared at 1100 degrees C under Ar/H-2 achieved a H-2 production of 3.62 mu mol with a positive applied bias of 1.1 V under LED illumination for 16 h., Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa and RTI2018-098237-B-C21) and Generalitat Valencia (Prometeo 2017/083) is gratefully acknowledged. J. H. thanks the Chinese Scholarship Council (CSC) for supporting his doctoral stage at Valencia. A. P. also acknowledges the Spanish Ministry of Economy and Competitiveness for a Ramon y Cajal research associate contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Palladium Supported on Porous Chitosan-Graphene Oxide Aerogels as Highly Efficient Catalysts for Hydrogen Generation from Formate

  • Anouar, Aicha
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Katir, Nadia
  • El Kadib, Abdelkrim
[EN] Adsorption of Pd(NH3)(4)(2+) in preformed chitosan-graphene oxide (CS-GO) beads and their subsequent reduction with NaBH4 afford well-dispersed, high dispersion (similar to 21%) of uniformly sized Pd nanoparticles (similar to 1.7 nm). The resulting Pd/CS-GO exhibits interesting catalytic activity for hydrogen generation by ammonium formate decomposition. The optimal GO proportion of 7 wt% allows reaching, at 60 degrees C, a turnover frequency above 2200 h(-1)-being outstanding among the highest values reported for this process to date. Interestingly, no formation of CO or CH4 was detected. The catalyst did not leach, although it underwent gradual deactivation, probably caused by the increase in the Pd average size that became over 3 nm after three uses. Our results are relevant in the context of efficient on-board hydrogen generation from liquid organic hydrogen carriers in transportation., This research was funded by the Spanish Ministry of Science, Innovation and Universities (Grant RTI2018-098237-B-C21 and Severo Ochoa). A.P. also thanks the Spanish Ministry of Science and Education a research associate Ramon y Cajal contract. A.A. thanks UEMF for scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Aqueous Phase Methanol Reforming Catalyzed by Fe-Cu Alloy Nanoparticles Wrapped on Nitrogen-Doped Graphene

  • García-Baldoví, Alberto
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Peng, Lu
  • Santiago-Portillo, Andrea
  • Asiri, Abdullah M.
[EN] Small Fe-Cu nanoparticles (NPs) (about 1 nm) supported at a high loading (over 10 wt %) on N-doped graphitic carbon have been prepared in a single pyrolytic step from chitosan adsorbing Cu2+ and Fe2+ salts. The presence of N atoms appears to be crucial in the formation of small-sized metallic NPs. Interactions between Fe and Cu are reflected by a shift in the binding energy to higher (Fe) or lower (Cu) values and by H-2 thermo-programmed reduction measurements, showing a new reduction peak at intermediate temperature (375 degrees C) between that of Cu (175 degrees C) and that of Fe (450 degrees C). Fe-Cu NPs embedded within the N-doped graphitic carbon matrix are extremely active (TOF 315 h(-1)) and selective (no CO detected) catalysts for methanol reforming in the aqueous phase with stoichiometric H2O amounts to H-2 and CO2. The results achieved with Fe-Cu compare favorably with those reported in the literature for catalysts based on Pt, Pd, or Ru., Financial support by the Spanish Ministry of Innovation and Science (Severo Ochoa and RTI2018-89237-CO2-1) and Generalitat Valenciana (Prometeo 2021-083) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Plasma-Induced Defects Enhance the Visible-Light Photocatalytic Activity of MIL-125(Ti)-NH2 for Overall Water Splitting

  • Cabrero-Antonino, Maria
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • García-Vallés, Cristina
[EN] Defect engineering in metal-organic frameworks is commonly performed by using thermal or chemical treatments. Herein we report that oxygen plasma treatment generates structural defects on MIL-125(Ti)-NH2, leading to an increase in its photocatalytic activity. Characterization data indicate that plasma-treated materials retain most of their initial crystallinity, while exhibiting somewhat lower surface area and pore volume. XPS and FT-IR spectroscopy reveal that oxygen plasma induces MIL-125(Ti)-NH2 partial terephthalate decarboxylation and an increase in the Ti-OH population. Thermogravimetric analyses confirm the generation of structural defects by oxygen plasma and allowed an estimation of the resulting experimental formula of the treated MIL-125(Ti)-NH2 solids. SEM analyses show that oxygen plasma treatment of MIL-125(Ti)-NH2 gradually decreases its particle size. Importantly, diffuse reflectance UV/Vis spectroscopy and valence band measurements demonstrate that oxygen plasma treatment alters the MIL-125(Ti)-NH2 band gap and, more significantly, the alignment of highest occupied and lowest unoccupied crystal orbitals. An optimal oxygen plasma treatment to achieve the highest efficiency in water splitting with or without methanol as sacrificial electron donor under UV/Vis or simulated sunlight was determined. The optimized plasma-treated MIL-125(Ti)-NH2 photocatalyst acts as a truly heterogeneous photocatalyst and retains most of its initial photoactivity and crystallinity upon reuse., S.N. thanks the Fundacion Ramon Areces (XVIII Concurso Nacional para la Adjudicacion de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia, 2016), the Ministerio de Ciencia, Innovacion y Universidades RTI 2018-099482-A-I00 project, the Generalitat Valenciana grupos de investigacion consolidables 2019 (ref: AICO/2019/214) project, and the AVI project (INNEST/2020/111) for financial support. Financial support by the European Union (LoterCO2M), Spanish Ministry of Science, Innovation and Universities (Severo Ochoa and RTI2018-098237-B-C21), and Generalitat Valenciana (Prometeo 2017-083) is also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-current water electrolysis performance of metal phosphides grafted on porous 3D N-doped graphene prepared without using phosphine

  • Hu, Hu Jiajun
  • Peng, Lu
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Development of efficient and stable electrodes for hydrogen and oxygen evolution from water constituted of abundant elements and prepared by sustainable and scalable procedures is of considerable importance for producing green hydrogen from renewable electricity. Herein, a method for the preparation of Ni2P, Fe2P, and FeP supported on N-doped graphene (NiP/NG and FeP/NG) is reported. The procedure uses metal salts, phosphorous oxide, and chitosan as precursors of metal phosphide and N-doped graphene, avoiding the use of undesirable and hazardous precursors, such as PH3 or NaH2PO2, and rendering a material with a strong metal phosphide-graphene interaction. Moreover, NiP/NG and FeP/NG electrodes are demonstrated to be more efficient than the benchmark catalysts Pt/C and RuO2, for hydrogen evolution reaction and oxygen evolution reaction, respectively, at a large current density (300 mA/cm(2)). In addition, water electrolysis was carried out using NiP/NG//FeP/NG electrodes, also demonstrating improved efficiency and stability compared with Pt/C//RuO2 at a current density (400 mA/cm(2)) near industrial requirements., Financial support by the "MCIN/AEI/10.13039/501100011033/y por FEDER Una manera de hacer Europa'' (RTI2018-098237-B-C21) and Generalitat Valenciana (Prometeo 2021-038) are gratefully acknowledged. The European Union project H2020-LC-SC3-2020-RES-RIA "EcoFuel''(grant agreement 101006701) is also gratefully acknowledged. J.H. thanks the Chinese Scholarship Council for doctoral fellowship. L.P. also thanks the Generalitat Valenciana for a Grisolia postgraduate scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nickel phosphonate MOF as efficient water splitting photocatalyst

  • Salcedo-Abraira, Pablo
  • Vilela, Sérgio M. F.
  • Babaryk, Artem A.
  • Salles, Fabrice
  • Horcajada, Patricia
  • Cabrero-Antonino, Maria
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Ponce Gregorio, Pedro|||0000-0002-9548-767X
[EN] A novel microporous two-dimensional (2D) Ni-based phosphonate metal-organic framework (MOF; denoted as IEF-13) has been successfully synthesized by a simple and green hydrothermal method and fully characterized using a combination of experimental and computational techniques. Structure resolution by single-crystal X-ray diffraction reveals that IEF-13 crystallizes in the triclinic space group P-i having bi-octahedra nickel nodes and a photo/electroactive tritopic phosphonate ligand. Remarkably, this material exhibits coordinatively unsaturated nickel(II) sites, free-PO3H2 and-PO3H acidic groups, a CO2 accessible microporosity, and an exceptional thermal and chemical stability. Further, its in-deep optoelectronic characterization evidences a photoresponse suitable for photocatalysis. In this sense, the photocatalytic activity for challenging H-2 generation and overall water splitting in absence of any co-catalyst using UV-Vis irradiation and simulated sunlight has been evaluated, constituting the first report for a phosphonate-MOF photocatalyst. IEF-13 is able to produce up to 2,200 mu mol of H-2 per gram using methanol as sacrificial agent, exhibiting stability, maintaining its crystal structure and allowing its recycling. Even more, 170 mu mol of H-2 per gram were produced using IEF-13 as photocatalyst in the absence of any co-catalyst for the overall water splitting, being this reaction limited by the O-2 reduction. The present work opens new avenues for further optimization of the photocatalytic activity in this type of multifunctional materials., This work was supported by MOFseidon project (Retos project, PID2019-104228RB-I00, MICIU-AEI/FEDER, UE), and the Ramon Areces Foundation project H+MOFs. P. H. acknowledges the Spanish Ramon y Cajal Programme (2014-15039). S. N. thanks financial support by the Fundacion Ramon Areces (XVIII Concurso Nacional para la Adjudicacion de Ayudas a la Investigation en Ciencias de la Vida y de la Materia, 2016), Ministerio de Ciencia, Innovation y Universidades RTI2018-099482-A-I00 project and Generalitat Valenciana grupos de investigacion consolidables 2019 (AICO/2019/214) project and Agencia Valenciana de la Innovacio (AVI, INNEST/2020/111) project. H. G. thanks financial support to the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-098237-CO21) and Generalitat Valenciana (Prometeo2017/083). In memory of our dear colleague, Prof. Emilio Moran, who recently passed away.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Novel Porous Ti-Squarate as Efficient Photocatalyst in the Overall Water Splitting Reaction under Simulated Sunlight Irradiation

  • Salcedo-Abraira, Pablo
  • Babaryk, Artem A.
  • Montero-Lanzuela, Eva
  • Contreras Almengor, Oscar R.
  • Cabrero-Antonino, Maria
  • Svensson, Erik
  • Willhammar, Tom
  • Elkäim, Erik
  • Horcajada, Patricia
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] A new porous titanium(IV) squarate metal¿organic framework (MOF), denoted as IEF-11, having a never reported titanium secondary building unit, is successfully synthesized and fully characterized. IEF-11 not only exhibits a permanent porosity but also an outstanding chemical stability. Further, as a consequence of combining the photoactive Ti(IV) and the electroactive squarate, IEF-11 presents relevant optoelectronic properties, applied here to the photocatalytic overall water splitting reaction. Remarkably, IEF-11 as a photocatalyst is able to produce record H2 amounts for MOF-based materials under simulated sunlight (up to 672 µmol gcatalyst in 22 h) without any activity loss during at least 10 d., P.S.-A. and A.A.B. contributed equally to this work. The authors acknowledge the Ramón Areces Foundation project H+MOFs, the M-ERA-NET C-MOF-cell (grant PCI2020-111998 funded by MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/ PRTR) project, and Retos Investigación MOFSEIDON (grant PID2019-104228RB-I00 funded by MCIN/AEI/10.13039/501100011033) project. S.N. thanks financial support by Ministerio de Ciencia, Innovatión y Universidades RTI2018-099482-A-I00 project and Agència Valenciana de la Innovació (AVI, INNEST/2020/111) project. H.G. thanks financial support to the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-098237-CO21) and Generalitat Valenciana (Prometeo2017/083). T.W. acknowledges financial support from the Swedish Research Council (VR, 2019-05465). Parts of this research were carried out at ¿CRISTAL¿ at SOLEIL. P.S. and A.A.B. sincerely thank to the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020 for the support of the synchrotron experiment.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Subphthalocyanine encapsulated within MIL-101(Cr)-NH2 as a solar light photoredox catalyst for dehalogenation of alpha-haloacetophenones

  • Santiago-Portillo, Andrea
  • Remiro-Buenamañana, Sonia|||0000-0002-5393-5729
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Subphthalocyanine has been incorporated into a robust metal-organic framework having amino groups as binding sites. The resulting SubPc@MIL-101(Cr)-NH2 composite has a loading of 2 wt%. Adsorption of subphthalocyanine does not deteriorate host crystallinity, but decreases the surface area and porosity of MIL-101(Cr)-NH2. The resulting SubPc@MIL-101(Cr)-NH2 composite exhibits a 575 nm absorption band responsible for the observed photoredox catalytic activity under simulated sunlight irradiation for hydrogenative dehalogenation of alpha-haloacetophenones and for the coupling of alpha-bromoacetophenone and styrene. The material undergoes a slight deactivation upon reuse. In comparison to the case of phthalocyanines the present study is one of the few cases showing the use of subphthalocyanine as a photoredox catalyst, with its activity derived from site isolation within the MOF cavities., Financial support from the Spanish Ministry of Economy and Competitiveness (Severo Ochoa and RTI2018-098237-B-C21) and Generalitat Valenciana (Prometeo 2017-083) is gratefully acknowledged. S. N. is thankful for the financial support from the Fundacion Ramon Areces (XVIII Concurso Nacional para la Adjudicacion de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia, 2016), the Ministerio de Ciencia, Innovacion y Universidades RTI 2018-099482-A-I00 project and the Generalitat Valenciana grupos de investigacion consolidables 2019 (ref: AICO/2019/214) project. S. R.-B. also thanks the Research Executive Agency (REA) and the European Commission for the funding received under the Marie Sklodowska Curie actions (H2020-MSCA-IF-2015/Grant agreement number 709023/ZESMO).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Robust Titanium Isophthalate Metal-Organic Framework for Visible-Light Photocatalytic CO2 Methanation

  • Wang, Sujing
  • Cao, Chen-chen
  • Tissot, Antoine
  • Dovgaliuk, Iurii
  • Marrot, Jerome
  • Martineau-Corcos, Charlotte
  • Yu, Liang
  • Wang, Hao
  • Shepard, William
  • Serre, Christian
  • Cabrero-Antonino, Maria
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Isophthalic acid (IPA) has been considered to build metal-organic frameworks (MOFs), owing to its facile availability, unique connection angle-mode, and a wide range of functional groups attached. Constructing titanium-IPA frameworks that possess photoresponse properties is an alluring characteristic with respect to the challenge of synthesizing new titanium-based MOFs (Ti-MOFs) Here, we report the first Ti-IPA MOF (MIP-208) that efficiently combines the use of preformed Ti-8 oxoclusters and in situ acetylation of the 5-NH2-IPA linker. The mixed solid-solution linkers strategy was successfully applied, resulting in a series of multivariate MIP-208 structures with tunable chemical environments and sizable porosity. MIP-208 shows the best result among the pure MOF catalysts for the photocatalytic methanation of carbon dioxide. To improve the photocatalytic performance, ruthenium oxide nanoparticles were photo-deposited on MIP-208, forming a highly active and selective composite catalyst, MIP-208@RuOx, which features a notable visible-light response coupled with excellent stability and recycling ability., S.W. acknowledges the support from the National Natural Science Foundation of China (22071234) and the Fundamental Research Funds for the Central Universities (WK2480000007). S.N. thanks the Ministerio de Ciencia, Innovacion y Universidades (RTI2018-099482-A-I00 project, the Fundacion Ramon Areces (XVIII Concurso Nacional para la Adjudicacion de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia, 2016), and Generalitat Valenciana grupos de investigacion consolidables (AICO/2019/214 project) and Agencia Valenciana de la Innovacion (INNEST/2020/111 project) for financial support. C.-C.C. acknowledges the support from the Program of China Scholarship Council (201700260093) and PHC Cai YuanPei Project (38893VJ). C.M.-C. is grateful for financial support from the Institut Universitaire de France (IUF) and the Paris Ile-de-France Region -DIM "Respore.'' H.G. thanks the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-098237-CO2-1) and Generalitat Valenciana (Prometeo2017/083) for financial support. The authors thank the staff at Synchrotron SOLEIL and the associated scientists for beamtime and assistance during SCXRD data collections on PROXIMA 2A, as well as Dr. Peng Guo and Dr. Nana Yan from Dalian Institute of Chemical Physics (Chinese Academy of Sciences) for the collection of high-resolution PXRD data for Rietveld refinement.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Large area continuous multilayer graphene membrane for water desalination

  • Presumido, Pedro H.
  • Vilar, Vítor J. P.
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] This manuscript reports the preparation of a large area (84 cm2) desalination membrane based on multilayers (11 nm thickness) of B,N-codoped defective graphene. The process consists of coating a porous ceramic ?-Al2O3 support (100 nm pore size) with a continuous nanometric (50 nm) chitosan film containing adsorbed (NH4)3BO3. Subsequent pyrolysis in the presence of hydrogen converts chitosan into multilayer defective B,N-codoped graphene. The partial removal of B and N dopant atoms by H2 during the pyrolysis causes the generation of subnanometric pores due to atom vacancy, as determined by control experiments in the absence of this gas. A NaCl and KCl removal efficiency from brackish water higher than 95% for a permeate flux of 24.3 L m- 2 h-1 at 10 bars were achieved., This work was financially supported by: i) Project NOR-WATER funded by INTERREG VA SpainPortugal cooperation programme, CrossBorder North Portugal/Galiza Spain Cooperation Program (POC-TEP) and ii) Base Funding UIDB/50020/2020 of the Associate Laboratory LSRELCMfunded by national funds through FCT/MCTES (PIDDAC) . P.H. Presumido acknowledges FCT for his scholarship (SFRH/BD/138756/2018) . V.J.P. Vilar acknowledges the FCT Individual Call to Scientific Employment Stimulus 2017 (CEECIND/01317/2017) . Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa SEV2016 and RTI2018-890237-CO2-R1) and Generalitat Valenciana (Prometeo 2017-83) is also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Engineering catalytic sites for oxidation and condensation reactions using metal-organic frameworks or graphene-based materials

  • Vallés García, Cristina
[ES] La presente tesis doctoral ha mostrado la posibilidad de diseñar sitios activos de MOFs y materiales basados en grafeno para ser utilizados como catalizadores con actividad mejorada para reacciones de oxidación y condensación. Específicamente, el desarrollo de una combinación de metales MIL-101(Cr,Fe) ha dado como resultado un catalizador con actividad catalítica mejorada para la reacción de Prins entre ß-pineno y formaldehído con respecto al MIL-101(Cr) o el inestable MIL-101(Fe) en las condiciones de reacción estudiadas. La presencia de iones Fe3+ en los nodos metálicos del MIL-101(Cr, Fe) aumenta la densidad y la fuerza de los sitios ácidos de Lewis del material, mientras que la presencia de Cr+3 en los nodos metálicos proporciona estabilidad al catalizador. Además, esta Tesis ha demostrado que la presencia de grupos NO2 en el ligando orgánico tereftalato de MIL-101(Cr) aumenta la densidad y la fuerza de los sitios ácidos de Lewis del material. Por lo tanto, MIL-101(Cr)-NO2 exhibe una actividad catalítica superior para la síntesis de bencimidazoles a partir de o-fenilendiaminas y derivados de benzaldehído, así como para la oxidación aeróbica del tiofenol y la desulfuración oxidativa aeróbica de dibenzotiofenos. Esta Tesis también ha demostrado que la selección de un agente reductor apropiado como la hidroquinona para la preparación de rGO a partir de GO aumenta la densidad de los sitios activos para promover las oxidaciones aeróbicas de tiofenol e indano., [CA] La present Tesi doctoral ha mostrat la possibilitat de dissenyar llocs actius de MOFs i materials basats en grafè per ser utilitzats com a catalitzadors amb activitat millorada per a reaccions d'oxidació i condensació. Específicament, el desenvolupament d'una combinació de metalls MIL-101(Cr,Fe) ha donat com a resultat un catalitzador amb activitat catalítica millorada per a la reacció de Prins entre ß-pinè i formaldehíd pel que fa a MIL-101(Cr) o l'inestable MIL-101(Fe) en les condicions de reacció estudiades. La presència de ions Fe3+ en els nodes metàl·lics de MIL-101(Cr,Fe) augmenta la densitat i la força dels llocs àcids de Lewis del material, mentre que la presència de Cr3+ en els nodes metàl·lics proporciona estabilitat al catalitzador. A més a més, aquesta Tesi ha demostrat que la presència de grups NO2 al lligam orgànic tereftalat de MIL-101(Cr) augmenta la densitat i la força dels llocs àcids de Lewis del material. Per tant, MIL 101(Cr)-NO2 exhibeix una activitat catalítica superior per a la síntesis de bencimidazols a partir de o-fenilendiamines i derivats de benzaldehid, així com per a l'oxidació aeròbica del tiofenol i la desulfuració oxidativa aeròbica de dibenzotiofens. Aquesta Tesi també ha demostrat que la sel·lecció d'un agent reductor apropiat com la hidroquinona per a la preparació de rGO a partir de GO augmenta la densitat dels llocs actius per a promoure les oxidacions aeròbiques de tiofenol i indano., [EN] The present doctoral thesis has shown the possibility of engineering the active sites of MOFs and graphene-based materials as catalysts with enhanced activity for oxidation and condensation reactions. Specifically, the development of a mixed-metal MIL-101(Cr, Fe) has resulted in a catalyst with enhanced catalytic activity for the Prins reaction between ß-pinene and formaldehyde with respect to the use of MIL-101(Cr) or the unstable MIL 101(Fe) under the studied reaction conditions. The presence of Fe3+ ions in the metal nodes of the MIL-101(Cr, Fe) increases the density and strength of the Lewis acid sites of the material and the presence of Cr3+ in the metal nodes provides catalyst stability. Furthermore, this thesis has demonstrated that the presence of NO2 groups in the terephthalate organic ligand of MIL 101(Cr) increases the density and strength of Lewis acid sites of the material. Thus, MIL-101(Cr)-NO2 exhibits a superior catalytic activity for the synthesis of benzimidazoles from o-phenylenediamines and benzaldehyde derivatives, as well as for the aerobic oxidation of thiophenol and the aerobic oxidative desulfuration of dibenzothiophenes. This thesis has also shown that the selection of an appropriate reducing agent (such as hydroquinone) for the preparation of rGO from GO increases the density of active sites and promotes the aerobic oxidations of thiophenol and indane., Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa, CTQ2018-890237-CO2-R1 and Maria de Maeztu, CEX2019-000919-M), is gratefully acknowledged. Generalidad Valenciana is also thanked for funding (Prometeo 2017/083). S.N. thanks financial support by the Ministerio de Ciencia, Innovación y Universidades (RTI 2018-099482-A-100 project), Fundación Ramón Areces (XVIII Concurso Nacional para la Adjudicación de Ayudas a la Investigación en Ciencias de la Vida y de la Materia, 2016), and Generalitat Valenciana grupos de investigación consolidables 2019 (ref: AICO/2019/214) Project. E. G. thanks the ANR-11-LABEX-0039 (LabEx CHARM3AT) for financial support. M.G.-M thanks support from “la Caixa” Fundation (LCF/BQ/PI19/11690022) and Generalitat Valenciana (SEJI/2020/036). Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-098237-CO21) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High hydrogen release catalytic activity by quasi-MOFs prepared via post-synthetic pore engineering

  • Bagheri, Minoo
  • Masoomi, Mohammad Yaser
  • Domínguez Torres, Esther
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The catalytic activity of metal-organic frameworks (MOFs) depends largely on the presence of structural defects. In the present study, cobalt based metal-organic framework TMU-10, [Co-6(oba)(5)(OH)(2)(H2O)(2)(DMF)(4)](n)center dot 2DMF has been subjected to controlled thermolysis under air atmosphere at different temperatures in the range of 100-700 degrees C. This treatment results in the removal of ligands, and generation of structural defects and additional porosity in a controlled manner. The resulting materials, denoted as quasi MOFs according to the literature, were subsequently employed as catalysts for hydrogen release from NaBH4 by hydrolysis. The quasi TMU-10 framework obtained at 300 degrees C (QT-300) shows the highest turnover frequency of the series with a value of 13 333 mL min(-1) g(-1) at room temperature in the absence of a base, with an activation energy of 56.8 kJ mol(-1). The simultaneous presence of micro- and mesopores in QT-300 with unsaturated Lewis acid sites on cobalt nodes due to the conversion of a fraction of Co(ii) centers to Co(iii) as well as the presence of tetrahedral Co(ii) sites is responsible for this catalytic behavior. The influence of the catalyst dosage and BH4- concentration is in good agreement with the Langmuir-Hinshelwood model in which both reactants must be adsorbed onto the catalyst surface. Further investigation on the hydrolysis of the NaBH4 + D2O system presents a primary kinetic isotope effect indicating that water O-H bond cleavage occurs in the rate determining step., Support of this investigation by Arak University and Iran National Science Foundation (INSF) (grant No. 4000089) are gratefully acknowledged. Ministerio de Ciencia e Innovacion (Severo Ochoa and RTI2018-98237-CO2-1) and Generalitat Valenciana (Prometeo 2017/083) are also acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Porous Single-Crystal-Based Inorganic Semiconductor Photocatalysts for Energy Production and Environmental Remediation: Preparation, Modification, and Applications

  • Niu, Jinan
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Semiconductor photocatalytic and photovoltaic performance depends on crystallinity and surface area to a large extent. One strategy that has recently emergyed to improve semiconductor photoresponse efficiency is their synthesis as porous single crystals (PSCs), therefore providing simultaneously high crystallinity, minimization of grain boundaries, and large specific surface area. Other factors, such as high density of active sites, and enhanced light absorption, also contribute to increased PSC photoresponse with respect to analogous bulk or amorphous materials. This review initially presents the concept and main properties of PSCs. Then, the synthetic routes and the applications as photocatalysts and as photovoltaic devices, mainly in sunlight applications, are summarized. The synthetic procedures have been classified according to the mechanism of pore generation. Applications cover photocatalysis for environmental remediation, solar fuels production, selective photooxidation of organic compounds, and photovoltaic devices. Finally, a summary and views on future developments are provided. The purpose of this review is to show how the use of PSCs is a powerful general methodology applicable beyond metal oxides and can ultimately lead to sufficient photoresponse efficiency, bringing these processes close to commercial application., Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa SEV2016-0683 and RTI2018-89023-CO2-R1) and by the Generalitat Valenciana (Prometeo 2017-083) is gratefully acknowledged. J.N. also gratefully acknowledges financial support from the Fundamental Research Funds for the Central Universities (2019XKQYMS76).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nanometric-Thick Metal-Free h-Boron Nitride/Graphene Films as Base Catalyst for the Synthesis of Benzoxazoles

  • Rendón-Patiño, Alejandra
  • Cojocaru, Bogdan
  • Ion, Sabina Gabriela
  • Popescu, Dana G.
  • Parvulescu, Vasile
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Catalysts are frequently used as pelletized powdered materials, but rarely as thin films. The present work reports the use of 2D h-boron nitride on few layers defective graphene (h-BN/fl-G) films of about 10 nm thickness as base catalyst for the synthesis of benzoxazoles by coupling a 2-amino-phenol with p-substituted benzaldehydes. The synthesis of benzoxazole derivatives has aroused much interest in the last decades due to their application as potent anticancer agents against MCF-7 and MDA-MB-231 breast cancer cells. The results demonstrate that these nanometer-thick films exhibit three orders of magnitude higher activity than K2CO3 taken as benchmark base catalyst. The activity and selectivity of h-BN/fl-G films depend on the nature of substituents on benzaldehyde, the solvent and reaction temperature., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-89237-CO2-R1), Generalitat Valenciana (Promoteo 2021-032) and UEFISCD (PN-III-P4-ID-PCCF-2016-0088, PN-III-P4-ID-PCE-2020-1532) is gratefully acknowledged. A. P. thanks the Ministerio de Ciencia e Innovacion for a Ramon y Cajal research associate contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nitro functionalized chromium terephthalate metal-organic framework as multifunctional solid acid for the synthesis of benzimidazoles

  • Vallés-García, Cristina
  • Dhakshinamoorthy, Amarajothi
  • Cabrero-Antonino, Maria
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] In the present work, nitro functionalized chromium terephthalate [MIL-101(Cr)-NO2] metal-organic framework is prepared and characterized by powder X-ray diffraction (XRD), elemental analysis, infrared spectroscopy (IR), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM) and Brun auer-Emmett-Teller (BET) surface area. The inherent Lewis acidity of MIL-101(Cr)-NO2 is confirmed by FT-IR spectroscopy using CD3CN as a probe molecule. The performance of MIL-101(Cr)-NO2 as bifunctional catalyst (acid and redox) promoting the synthesis of wide range of benzimidazoles has been examined by catalyzed condensation on acid sites and subsequent oxidative dehydrogenation. The catalytic activity of MIL-101(Cr)-NO2 is found to be superior than analogues catalysts like MIL-101(Cr)-S0(3)H, MIL-101(Cr)-NH2, U10-66(Zr), Ui0-66(Zr)-NO2, MIL-100(Fe) and Cu-3(BTC)(2) (BTC: 1,35-benzenetricarboxylate) under identical reaction conditions, The structural stability of MIL-101(Cr)-NO2 is supported by leaching analysis and reusability tests. MIL-101(Cr)-NO2 solid is used five times without decay in its activity. Comparison of the fresh and five times used MIL-101(Cr)-NO2 solids by powder XRD, SEM and elemental analysis indicate identical crystallinity, morphology and the absence of chromium leaching, respectively. (C) 2019 Elsevier Inc. All rights reserved., AD thanks the University Grants Commission, New Delhi, for the award of an Assistant Professorship under its Faculty Recharge Programme. AD also thanks the Department of Science and Technology, India, for the financial support through Extra Mural Research Funding (EMR/2016/006500). Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-098237-CO21) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. S.N. thanks financial support by the Fundacion Ramon Areces (XVIII Concurso Nacional para la Adjudication de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia, 2016), Ministerio de Ciencia, Innovation y Universidades RTI2018-099482-A-I00 project and Generalitat Valenciana grupos de investigacion consolidables 2019 (AICO/2019/214) project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Co-Fe Nanoparticles Wrapped on N-Doped Graphitic Carbons as Highly Selective CO2 Methanation Catalysts

  • Jurca, Bogdan
  • Peng, Lu
  • Gordillo, Alvaro
  • Parvulescu, Vasile I.
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Pyrolysis of chitosan containing various loadings of Co and Fe renders Co-Fe alloy nanoparticles supported on N-doped graphitic carbon. Transmission electron microscopy (TEM) images show that the surface of Co-Fe NPs is partially covered by three or four graphene layers. These Co-Fe@(N)C samples catalyze the Sabatier CO2 hydrogenation, increasing the activity and CH4 selectivity with the reaction temperature in the range of 300-500 degrees C. Under optimal conditions, a CH4 selectivity of 91% at an 87% CO2 conversion was reached at 500 degrees C and a space velocity of 75 h(-1) under 10 bar. The Co-Fe alloy nanoparticles supported on N-doped graphitic carbon are remarkably stable and behave differently as an analogous Co-Fe catalyst supported on TiO2., Financial support by the Spanish Ministry of Science, Innovation and University (Severo Ochoa and RTI2018.98237-B-CO1) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. L.P. thanks the Generalitat Valenciana for a Santiago Grisolia scholarship, and A.P. thanks the Spanish Ministry of Science and Education for a Ramon y Cajal research associate contract. V.I.P. thanks the UEFISCDI for continued funding through the projects PN-IIIP1-1.2-PCCDI-2017-0541 1/2018, PN-III-P4-ID-PCCF-20160088 17/2021, and PN-III-P4-ID-PCE-2020-1532. BASF is thanked for the financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Engineering hydrogenation active sites on graphene oxide and N-doped graphene by plasma treatment

  • Magureanu, Monica
  • Mandache, N. B.
  • Rizescu, C.
  • Bucur, Cristina
  • Cojocaru, Bogdan
  • Man, Isabela C.
  • Parvulescu, Vasile, I.
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Graphene oxide (GO) and N-doped graphene [(N)G] graphenes were submitted to H-2 glow discharge under different discharge regimes, in both the negative glow and positive column plasma regions. The resulted catalysts were fully characterized using several techniques such as Raman, DRIFT and XPS spectroscopy, powder X-ray diffraction, H-2 pulse chemisorption and H-2-, CO2- and NH3-TPD experiments. Density functional theory calculations were performed taking a slab model of graphene sheet with an optimized C-C bond length (1.426 angstrom) and a 16 angstrom vacuum layer between sheets. An overview of these characterizations showed that the O/C atomic ratio of GO is influenced by the plasma regime, indicating the occurrence of O removal, as also predicted by DFT calculations. In the case of (N)G, the plasma treatment also removes pyridinic N with an increase of the C/N ratio. The efficiency of the plasma modification has been checked through catalytic tests in hydroisomerization of 1-octene and hydrogenation of alpha-methyl-styrene. Contrarily to classical thermal activation requiring high temperatures, the generation of the defects by treating with plasma occurs at voltages in the range of 2 5 kV. In consequence, the hydrogenation and isomerization of alkenes resulted with high yields and good selectivities. Graphene prepared from sodium alginate from brown algae was considered as reference in these investigations., This work was supported by the Romanian Ministry of Education and Research UEFISCDI (projects PN-III-P4-ID-PCE-2016-0146, nr. 121/2017, PN-III-P1-1.1-TE-2016-2191, nr. 89/2018 and 16N/2019) and by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-89237-CO2-R1). MM thanks Dr. F. Gherendi for the calibration of the OES system.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photocatalytic CO2 Reduction to C2+Products

  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Peng, Yong
[EN] There is a considerable interest in the development of photocatalytic CO2 conversion by sunlight, since this process has similarities with natural photosynthesis on which life on Earth is based. At the moment, most of the efforts in this field have been aimed at increasing the productivity, rather than at the control of the product distribution. Particularly, compounds with two or more carbons (C2+) have higher added value than methane, carbon monoxide, or formate, which are typically the major products of CO2 reduction. This review focuses on those reports that have described the formation of compounds of two or more carbon atoms (C2+) in the photocatalytic CO2 reduction either by H2O or as H-2 as a source of electrons and protons. The existing literature has been organized according to the main factor considered to be responsible for the selectivity to C2+ products, including photocatalyst structuration, nature of the co-catalyst, influence of defects, and effects of surface plasmon band. Emphasis has been made on remarking the current empirical knowledge based on experimental results and the lack of predictive capability that could lead to the development of efficient photocatalytic systems for C2+ production., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and No. CTQ2018-89237-CO2R1) and Generalitat Valenciana (Prometeo 2017/83) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Reduced Graphene Oxides as Carbocatalysts in Acceptorless Dehydrogenation of N-Heterocycles

  • Mollar-Cuni, Andrés
  • Ventura-Espinosa, David
  • Martin, Santiago
  • Mata, Jose A.
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The catalytic properties of graphene-derived materials are evaluated in acceptorless dehydrogenation of N-heterocycles. Among them, reduced graphene oxides (rGOs) are active (quantitative yields in 23 h) under mild conditions (130 degrees C) and act as efficient heterogeneous carbocatalysts. rGO exhibits reusability and stability at least during eight consecutive runs. Mechanistic investigations supported by experimental evidence (i.e., organic molecules as model compounds, purposely addition of metal impurities and selective functional group masking experiments) suggest a preferential contribution of ketone carbonyl groups as active sites for this transformation., Supported by MCIN/AEI/10.13039/501100011033/FEDER (Grant Nos. RTI2018-098237-B-C21, RTI2018-098237-BC22, and PID2019-105881RB-I00), Generalitat Valenciana (No. PROMETEU/2020/028), and Universitat Jaume I (No. UJI-B2018-23).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Promotional Effects on the Catalytic Activity of Co-Fe Alloy Supported on Graphitic Carbon for CO2 Hydrogenation

  • Jurca, Bogdan
  • Peng, Lu
  • Gordillo, Alvaro
  • Dhakshinamoorthy, Amarajothi
  • Parvulescu, Vasile I.
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Starting from the reported activity of Co-Fe nanoparticles wrapped onto graphitic carbon (Co-Fe@C) as CO2 hydrogenation catalysts, the present article studies the influence of a series of metallic (Pd, Ce, Ca, Ca, and Ce) and non-metallic (S in various percentages and S and alkali metals) elements as Co-Fe@C promoters. Pd at 0.5 wt % somewhat enhances CO2 conversion and CH4 selectivity, probably due to H-2 activation and spillover on Co-Fe. At similar concentrations, Ce does not influence CO2 conversion but does diminish CO selectivity. A 25 wt % Fe excess increases the Fe-Co particle size and has a detrimental effect due to this large particle size. The presence of 25 wt % of Ca increases the CO2 conversion and CH4 selectivity remarkably, the effect being attributable to the CO2 adsorption capacity and basicity of Ca. Sulfur at a concentration of 2.1% or higher acts as a strong poison, decreasing CO2 conversion and shifting selectivity to CO. The combination of S and alkali metals as promoters maintain the CO selectivity of S but notably increase the CO2 conversion. Overall, this study shows how promoters and poisons can alter the catalytic activity of Co/Fe@C catalysts, changing from CH4 to CO. It is expected that further modulation of the activity of Co/Fe@C catalysts can serve to drive the activity and selectivity of these materials to any CO2 hydrogenation products that are wanted., This research was funded by the Spanish Ministry of Science and Innovation and the University (Severo Ochoa SEV2021 and RTI2018.98237-B-CO1) and Generalitat Valenciana (Prometeo 2017/083). A.P. is the recipient of a Ramon y Cajal research associate contract awarded by the Spanish Ministry of Science and Innovation. L.P. thanks the Generalitat Valenciana for a Santiago Grisolia scholarship. BASF is thanked for financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Band Engineering of Semiconducting Microporous Graphitic Carbons by Phosphorous Doping: Enhancing of Photocatalytic Overall Water Splitting

  • Garcia-Mulero, Ana
  • Rendón-Patiño, Alejandra
  • Asiri, Abdullah M.
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Carbon-based solar photocatalysts for overall water splitting could provide H2 as an energy vector in a clean and sustainable way. Band engineering to align energy levels can be achieved, among other ways, by doping. Herein, it is shown that phosphorous doping of microporous graphitic carbons derived from pyrolysis of ¿-, ß-, and ¿-cyclodextrin increases the valence band edge energy of the material, and the energy value of the conduction band decreases with the P content. In this way, P doping increases the activity of these metal-free materials in photocatalytic overall water splitting under simulated sunlight and visible-light illumination. The optimal P-doped photocatalyst in the absence of any metal as a cocatalyst affords, after 4 h of irradiation with simulated sunlight, a H2 production of 2.5 mmol of H2 × gcatalyst¿1 in the presence of methanol as the sacrificial agent or 225 ¿mol of H2 × gcatalyst¿1 from pure H2O., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI-2018-98237-CO2-R1) and Generalitat Valenciana (Prometeo 2021/038) is gratefully acknowledged. A.G.M. and A. P. also thank the Spanish Ministry of Science and Innovation by a postgraduate scholarship and a Ramon y Cajal research associate contract, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High C2-C4 selectivity in CO2 hydrogenation by particle size control of Co-Fe alloy nanoparticles wrapped on N-doped graphitic carbon

  • Peng, Lu
  • Jurca, Bogdan
  • Gordillo, Alvaro
  • Parvulescu, Vasile I.
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] A catalyst based on first-row Fe and Co with a record of 51% selectivity to C-2-C-4 hydrocarbons at 36% CO2 conversion is disclosed. The factors responsible for the C2+ selectivity are a narrow Co-Fe particle size distribution of about 10 nm and embedment in N-doped graphitic matrix. These hydrogenation catalysts convert CO2 into C-2-C-4 hydrocarbons, including ethane, propane, n-butane, ethylene and propylene together with methane, CO. Selectivity varies depending on the catalyst, CO2 conversion, and the operation conditions. Operating with an H-2/ CO2 ratio of 4 at 300 degrees C and pressure on 5 bar, a remarkable combined 30% of ethylene and propylene at 34% CO2 conversion was achieved. The present results open the way to develop an economically attractive process for CO2 reduction leading to products of higher added value and longer life cycles with a substantial selectivity., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-98237-CO2-R1) and Generalitat Valenciana (Prometeo 2021/38) is gratefully acknowledged. Partial funding by BASF is thankfully acknowledged. V.I.P. thanks UEFISCDI ((PN-III-P4-ID-PCE-2016-0146, 121/2017 and PN-III-P4-ID-PCE-2020-1532) for funding.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing visible-light photocatalytic activity for overall water splitting in UiO-66 by controlling metal node composition

  • Melillo, Arianna
  • Cabrero-Antonino, Maria
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • Ferrer Ribera, Rosa Belén
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The photocatalytic activity of a series of five UiO-66 (M: Zr, Zr/Ti, Zr/Ce, Zr/Ce/Ti, Ce) materials for overall water splitting with generation of hydrogen and oxygen has been herein measured. The most efficient photocatalyst for the overall water splitting is the trimetallic MOF UiO-66(Zr/Ce/Ti) which achieves 230 mu mol.g(-1) of H-2 and 110 mu mol.g(-1) of O-2, upon UV light irradiation, and 210 mu mol.g(-1) of H-2 and 70 mu mol.g(-1) of O-2, under visible light irradiation. These productivity data indicate that a considerable percentage of its photocatalytic activity derives from the visible region of the spectrum (lambda > 450 nm). The photocatalytic activity of trimetallic UiO-66(Zr/Ce/Ti) was maintained upon reuse. Kinetics of the charge separated state monitored by transient absorption spectroscopy shows similar deactivation profiles for the five UiO-66 samples, suggesting that it is the charge separation efficiency the main factor responsible for the differences in the photocatalytic activity. The use of methanol as sacrificial agent during the photocatalytic experiments indicated that the high photocatalytic efficiency for overall water splitting in UiO-66(Zr/Ce/Ti) derives from the favorable kinetics of oxygen evolution. These results show the potential of multimetallic metal-organic frameworks as solar photocatalysts by tuning light absorption towards the visible region., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-098237-CO21) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. S.N. thanks financial support by the Fundacion Ramon Areces (XVIII Concurso Nacional para la Adjudicacion de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia, 2016), Ministerio de Ciencia, Innovacion y Universidades RTI2018-099482-A-I00 project and Generalitat Valenciana grupos de investigacion consolidables 2019 (ref: AICO/2019/214) project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic Ozonation Using Edge-Hydroxylated Graphite-Based Materials

  • Bernat-Quesada, Francisco
  • Espinosa-López, Juan Carlos
  • Barbera, Vincenzina
  • Galimberti, Maurizio
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] This work reports the catalytic ozonation activity of high surface area graphite materials selectively functionalized at the edges with hydroxyl groups. The graphite-based catalyst shows higher activity than the parent graphite, commercial activated carbon, commercial multiwall carbon nanotubes, commercial diamond nanoparticles, graphene oxide, or reduced graphene oxide. Importantly, the catalytic activity of the graphite-based material is also higher than those of benchmark ozonation catalysts such as Co3O4 or Fe2O3. The graphite catalyst was reused up to 10 times with only a minor decrease in the catalytic activity. Catalytic activation of O-3 leads to the generation of hydroperoxide radicals and O-1(2). These results have been interpreted as derived from the combination of a suitable work function and the presence of phenolic/semiquinone-like redox pairs, as well as high dispersibility in water due to the presence of -OH groups. This work highlights the possibility of engineering active and stable carbocatalysts for reactions typically promoted by transition metals., Financial support by the Spanish Ministry of Science and Innovation (Severn Ochoa and RTI2018-098237-CO21) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. S.N. is thankful for financial support from the Fundacion Ramon Areces (XVIII Concurso Nacional para la Adjudication de Ayudas a la Investigacion en Ciencias de la Vida y de la Materia, 2016), Ministerio de Ciencia, Innovacion y Universidades RTI2018-099482-A-I00 project and Generalitat Valenciana grupos de investigacion consolidables 2019 (ref: AICO/2019/214) project.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photocatalytic Overall Water Splitting Activity of Templateless Structured Graphitic Nanoparticles Obtained from Cyclodextrins

  • Peng, Yong
  • Rendon-Patiño, Alejandra
  • Franconetti, Antonio
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Pyrolysis of alpha-, beta-, and gamma-cyclodextrins at 900 degrees C under Ar forms porous 3D graphitic carbon nanoparticles with remarkable crystallinity, in which the pore dimensions range from 0.74 to 1.1 nm in the ultra/micropore range as determined by N-2, Ar, and CO2 adsorption. These materials behave as semiconductors with the potential energy of the conduction and valence bands being remarkably dependent in as much as 0.57 eV on the dimensions of the micropores. The photogeneration of electrons and holes was confirmed by photodeposition of Pt (electrons) and PbO2 (holes) nanoparticles by reduction and oxidation, respectively. Importantly, these 3D porous graphitic carbons generate H-2 and O-2 from H2O in the absence of any metal cocatalyst. Theoretical calculations at the DFT level confirm in models the influence of the dimensions of the pores, the presence of defects, and residual oxygen on the band energy and that the occurrence of H2O dissociation is favored inside the pores by a confinement effect. Considering the interest in developing metal-free photocatalyst, the present results show the possibility to tune the band alignment of porous carbon semiconductors by appropriate selection of precursors and the convenient generation of defects., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and CTQ2018-98237-CO2-1) and Generalitat Valenciana (Prometeo 2017-083) is gratefully acknowledged. We also thank the Center of Supercomputing of Galicia (CESGA) for the computational facilities. A.P. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Catalytic transformation of the marine polysaccharide ulvan into rare sugars, tartaric and succinic acids

  • Podolean, Iunia
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Coman, Simona M.
  • Bucur, Cristina
  • Teodorescu, Christian
  • Kikionis, Stefanos
  • Ioannou, Efstathia
  • Roussis, Vassilios
  • Parvulescu, Vasile I.
[EN] The green macroalga Ulva rigida represents a promising feedstock for biorefinary due to its fast growth and cosmopolitan distribution. The main component of the cell walls of U. rigida is a sulfated glucuronorhamnan polysaccharide known as ulvan. Herein it was found that due to the high (hydrogen)sulfate group content of ulvan, hydrothermal autohydrolysis at 130 degrees C renders a high percentage of rhamnose (78-79 % recovery from the initial content in the raw material), a rare sugar of high added value. In addition, acid catalysis by a triflate-based graphene oxide under oxygen-free conditions at 180 degrees C affords moderate amounts of tartaric acid (24-26 %). The same triflate-based graphene oxide catalyst under oxygen pressure yields remarkably high percentages of succinic acid (65 %). The catalyst preserves its activity for at least five consecutive reuses., Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa SEV2016-0683, RTI2018-890237-CO2R1) and Generalitat Valenciana (Prometeo 2017 083) is gratefully acknowledged. Vasile I. Parvulescu kindly acknowledges UEFISCDI for financial support (project PN-III-P4-ID-PCE-2016-0146, Nr. 121/2017).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Fe clusters embedded on N-doped graphene as a photothermal catalyst for selective CO2 hydrogenation

  • Szalad, Horatiu
  • Peng, Lu
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] In comparison with the Co analog, small Fe clusters incorporated in a graphene matrix exhibit a photo-assisted increase of 110% in reverse water gas shift CO2 hydrogenation under UV-Vis light irradiation. Available data indicate that the photo-assistance derives from light absorption by the N-doped graphene followed by charge recombination at the Fe clusters, increasing their local temperature., L. P. prepared and characterized the catalysts. H. S. performed the photocatalytic reactions and mechanistic experiments. A. P. supervised the materials preparation and characterization. J. A. performed the TA measurements. This work was supervised by J. A. and H. G. who wrote the draft. The manuscript was revised by all the authors. Financial support by the Spanish Ministry of Science and Innovation (RTI201898237-CO2-1) and Generalitat Valenciana (Prometeo 2017-083) is gratefully acknowledged. This project has also received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 861151.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

3D defective graphenes with subnanometric porosity obtained by soft-templating following zeolite procedures

  • Peng, Lu
  • Doménech-Carbó, Antonio
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] By applying the well-known templating mechanism employed for the synthesis of mesoporous silicas to the structuration of sodium alginate, a novel defective 3D tubular graphene material (graphenolite) with hierarchical macro/meso/micro-porous structure, very high powder specific surface area (1820 m(2) g(-1)) and regular micropore size (0.6 nm) has been obtained. The key feature of the process is the filmogenic property of alginate that is able to replicate the liquid crystal rods formed by the CTAC template in the aqueous phase. The 3D graphene exhibits 2.5 times higher capacitance using Li+ electrolyte compared to K+, indicating that Li+ can ingress to the ultramicropores which, in contrast, are not accessible to K+. Electrochemical impedance measurements also indicate much lower resistance for Li+ in comparison to K+ electrolyte, confirming the benefits of controlled microporosity of 3D graphene granting selective access to Li+, but not to K+. The present report opens the door for the synthesis of a wide range of 3D graphene materials that could be prepared following similar strategies to those employed for the preparation of zeolites and periodic mesoporous aluminosilicates., Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa and RTI2018-98237-CO2-R1) and Generalitat Valenciana (Prometeo 2017-083) is gratefully acknowledged. A.P. thanks the Spanish Ministry of Science and Education for a Ramon y Cajal research associate contract. We are indebted to Dr Miguel Palomino for CO2 adsorption measurements and Dr Pedro Atienzar for measurement of the electrical conductivity.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Bimetallic Ni and Mo Nitride as an Efficient Catalyst for Hydrodeoxygenation of Palmitic Acid

  • Du, Xiangze
  • Lei, Xiaomei
  • Zhou, Linyuan
  • Peng, Yong
  • Zeng, Yan
  • Yang, Huiru
  • Li, Dan
  • Hu, Changwei
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] In the context of the preparation of liquid fuelsderived from biomass with zero CO2footprint, fatty acids appearas suitable feedstocks. However, reduction of carboxylic acidgroups usually requires harsh reaction conditions and thedevelopment of efficient solid catalysts. Herein, bimetallic Ni-Mo nitrides have been obtained by a procedure not involvingnitridation of the corresponding oxide, but reductive decom-position of the tris(ethylenediamine)nickel molybdate at temper-atures between 550 and 700 degrees C. Successful formation of the Ni3Mo3N nitride is confirmed by X-ray diffraction. Ni3Mo3N samplesare found to be efficient catalysts for the hydrodeoxygenation of palmitic acid to C15/C16alkanes with a combined selectivity over 90and 100% palmitic acid conversion and higher activity than analogous Ni-Mo nitrides obtained by NH3nitridation of NiMoO4.Ni3Mo3N is found recyclable with only a slight decay in the catalytic activity upon consecutive reuses attributable to theneutralization of acid sites. The present results show an opportunity that bimetallic nitrides offer as robust advanced solid catalystsfor reactions of biomass conversion requiring harsh conditions., This work was financially supported by National Natural Science Foundation of China (no. 21972099), the Application Foundation Program of Sichuan Province (no. 2021YJ0305), and 111 project (no. B17030). Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-89237-CO2-R1) and Generalitat Valenciana is gratefully acknowledged. We thank Yunfei Tian of the Analytical & Testing Center of Sichuan University for XPS experiments. X.D. is also grateful for financial support from China Scholarship Council (CSC).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Band gap alignment of structured microporous graphitic carbons by N doping and its influence on photocatalytic overall water splitting

  • Rendon-Patiño, Alejandra
  • Torres-Martí, Ferrán|||0000-0002-2076-7087
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Hydrogen generation from water using solar light could be a process of paramount importance in the forthcoming decarbonized society. This reaction requires efficient photocatalysts based on earthabundant elements. Metal-free carbon semiconducting materials are very appealing in this regard. This manuscript shows that N-doping is a convenient strategy to increase the photocatalytic activity of microporous graphitic carbons obtained from the pyrolysis of a-, b- and g-cyclodextrins. These (N)C carbons exhibit enhanced photocatalytic activity for H2 generation in the presence of methanol with respect to their undoped analogs. The optimal (N)C material (pore size, 0.65 nm) was the one derived from a-cyclodextrin at a N content of 3.1%, achieving a H2 productivity of 1.8 mmol g1 at 4 h in the presence of methanol. These materials also exhibit photocatalytic activity for overall water splitting, although with lower efficiency than for H2 generation in the presence of sacrificial electron donors. The present results illustrate the tuning of band alignment by N-doping in the graphitic matrix, Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and CTQ2018-98237-CO2-1) and Generalitat Valenciana (Prometeo 2017-083) is gratefully acknowledged. AR and AP thanks the Spanish Ministry of Economy and Competitiveness for a postgraduate scholarship and a Ramon y Cajal research associate contract, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tridimensional N, P-Codoped Carbon Sponges as Highly Selective Catalysts for Aerobic Oxidative Coupling of Benzylamine

  • Peng, Lu
  • Garcia-Baldovi, Hermenegildo
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Two tridimensional N-doped porous carbon sponges (3DC-X) have been prepared by using cetyltrimethylammonium chloride ( CTAC) and cetyltrimethylammonium bromide (CTAB) as soft templates and alginate to replicate the liquid crystals formed by CTA+ in water. Alginate is a filmogenic polysaccharide of natural origin having the ability to form nanometric defectless films around objects. Subsequent pyrolysis at 900 degrees C under an Ar flow of the resulting CTA(+)-polysaccharide assemblies result in 3DC-1 and 3DC-2, with the N percentages of 0.48 and 0.36 wt % for the materials resulting from CTAC and CTAB, respectively. Another four 3DC materials were obtained via pyrolysis of the adduct of phytic acid and chitosan, rendering an amorphous, N and P-codoped carbon sample (3DC-3 to 3DC-6). The six 3DC samples exhibit a large area (>650 m(2) x g(-1)) and porosity, as determined by Ar adsorption. The catalytic activity of these materials in promoting the aerobic oxidation of benzylamine increases with the specific surface area and doping, being the largest for 3DC-4, which is able to achieve 73% benzylamine conversion to N-benzylidene benzylamine in solventless conditions at 70 degrees C in 5 h. Quenching studies and hot filtration tests indicate that 3DC-4 acts as a heterogeneous catalyst rather than an initiator, triggering the formation of hydroperoxyl and hydroxyl radicals as the main reactive oxygen species involved in the aerobic oxidation., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa 2016 and RTI2018-890237-CO2-R1) and Generalitat Valenciana is gratefully acknowledged. A.P. thanks the Spanish Ministry for a Ramon y Cajal Research associate contract. A.D. is thankful to the University Grants Commission, New Dekhi, for awarding Assistant Professorship through the Faculty Recharge Programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photoelectrochemical alcohols oxidation over polymeric carbon nitride photoanodes with simultaneous H-2 production

  • Karjule, Neeta
  • Phatake, Ravindra S.
  • Barzilai, Shmuel
  • Mondal, Biswajit
  • Azoulay, Adi
  • Shames, Alexander I.
  • Volokh, Michael
  • Shalom, Menny
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The photoelectrochemical oxidation of organic molecules into valuable chemicals is a promising technology, but its development is hampered by the poor stability of photoanodic materials in aqueous solutions, low faradaic efficiency, low product selectivity, and a narrow working pH range. Here, we demonstrate the synthesis of value-added aldehydes and carboxylic acids with clean hydrogen (H-2) production in water using a photoelectrochemical cell based solely on polymeric carbon nitride (CN) as the photoanode. Isotope labeling measurements and DFT calculations reveal a preferential adsorption of benzyl alcohol and molecular oxygen to the CN layer, enabling fast proton abstraction and oxygen reduction, which leads to the synthesis of an aldehyde at the first step. Further oxidation affords the corresponding acid. The CN photoanode exhibits excellent stability (>40 h) and activity for the oxidation of a wide range of substituted benzyl alcohols with high yield, selectivity (up to 99%), and faradaic efficiency (>90%), This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grant agreement No. [849068]). This work was also partially supported by the joint Israel Science Foundation-National Science Foundation of China (ISF-NSFC), grant No. 2969/19, the ISF grant No.601/21, and by the Pazy Foundation (grant No. 119-2020). J.A. and H.G. gratefully acknowledge.nancial support by the Spanish Ministry of Science and Innovation (RTI2018-98237-CO2-1) and Generalitat Valenciana (Prometeo 2021/038). The authors thank Liel Abisdris, Jonathan Tzadikov, Ayelet Tashakory, and Rotem Geva for help with material characterization. We thank Dr Chabanne for fruitful discussion.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ligand effects in the stabilization of gold nanoparticles anchored on the surface of graphene: Implications in catalysis

  • Ventura Espinosa, David
  • Martín, Santiago
  • García Gómez, Hermenegildo
  • Mata, José A.
Gold nanoparticles (Au NPs) functionalized with N-heterocyclic carbene (NHC) ligands immobilized onto graphene are obtained via spontaneous decomposition of well-defined gold-NHC complexes by reduced graphene oxide (rGO) without reducing agents. NHC ligands are responsible for the formation of air-stable, crystalline and small (3.0–4-0 nm) Au NPs homogeneously distributed on the surface of graphene. The catalytic properties of three Au NPs functionalized with different ligands were tested in two benchmark reactions (hydration of alkynes and intramolecular hydroamination of alkynes). The results reveal a pronounced ligand effect on the stability of Au NPs on graphene, by acting as a bridge between them. The Au NPs functionalized with a NHC ligand lacking a polyaromatic group or having a naphthyl tag displayed limited stability and fast deactivation in the first run. On the contrary, the Au NPs functionalized with a NHC ligand containing a pyrenyl handle showed superior catalytic activity and can be recycled at least ten times. The particle size of the Au NPs is preserved after the recycling process indicating a high stability. These results illustrate the use of purposely designed ligands having affinity for both Au NPs and graphene to increase the stability of the hybrid catalyst., The authors thank the financial support from MICIU/AEI/FEDER (RTI2018-098237-B-C21, RTI2018-098237-B-C22 and PID2019-105881RB-I00) and Universitat Jaume I (UJI-B2018-23). S. M. acknowledges DGA/fondos FEDER (construyendo Europa desde Aragón) for funding the research group Platón (E31_17R). D. V-E. thanks the MINECO for the FPU grant (FPU15/03011)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Co-Fe Nanoparticles Wrapped on N-Doped Graphitic Carbons as Highly Selective CO2Methanation Catalysts

  • Jurca, Bogdan
  • Peng, Lu
  • Primo, Ana
  • Gordillo, Alvaro
  • Parvulescu, Vasile I.
  • García Gómez, Hermenegildo
Pyrolysis of chitosan containing various loadings of Co and Fe renders Co-Fe alloy nanoparticles supported on N-doped graphitic carbon. Transmission electron microscopy (TEM) images show that the surface of Co-Fe NPs is partially covered by three or four graphene layers. These Co-Fe@(N)C samples catalyze the Sabatier CO2 hydrogenation, increasing the activity and CH4 selectivity with the reaction temperature in the range of 300-500 °C. Under optimal conditions, a CH4 selectivity of 91% at an 87% CO2 conversion was reached at 500 °C and a space velocity of 75 h-1 under 10 bar. The Co-Fe alloy nanoparticles supported on N-doped graphitic carbon are remarkably stable and behave differently as an analogous Co-Fe catalyst supported on TiO2., Financial support by the Spanish Ministry of Science, Innovation and University (Severo Ochoa and RTI2018.98237-B-CO1) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. L.P. thanks the Generalitat Valenciana for a Santiago Grisolía scholarship, and A.P. thanks the Spanish Ministry of Science and Education for a Ramón y Cajal research associate contract. V.I.P. thanks the UEFISCDI for continued funding through the projects PN-III-P1-1.2-PCCDI-2017-0541 1/2018, PN-III-P4-ID-PCCF-2016-0088 17/2021, and PN-III-P4-ID-PCE-2020-1532. BASF is thanked for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Novel Porous Ti-Squarate as Efficient Photocatalyst in the Overall Water Splitting Reaction under Simulated Sunlight Irradiation

  • Salcedo-Abraira, Pablo
  • Babaryk, Artem A.
  • Montero-Lanzuela, E.
  • Contreras Almengor, O.R
  • Cabrero-Antonino, María
  • Grape, Erik Svensson
  • Willhammar, Tom
  • Navalón, Sergio
  • Elkaim, Erik
  • García Gómez, Hermenegildo
  • Horcajada, Patricia
A new porous titanium(IV) squarate metal–organic framework (MOF), denoted as IEF-11, having a never reported titanium secondary building unit, is successfully synthesized and fully characterized. IEF-11 not only exhibits a permanent porosity but also an outstanding chemical stability. Further, as a consequence of combining the photoactive Ti(IV) and the electroactive squarate, IEF-11 presents relevant optoelectronic properties, applied here to the photocatalytic overall water splitting reaction. Remarkably, IEF-11 as a photocatalyst is able to produce record H amounts for MOF-based materials under simulated sunlight (up to 672 µmol g in 22 h) without any activity loss during at least 10 d., P.S.-A. and A.A.B. contributed equally to this work. The authors acknowledge the Ramón Areces Foundation project H+MOFs, the M-ERA-NET C-MOF-cell (grant PCI2020-111998 funded by MCIN/AEI /10.13039/501100011033 and European Union NextGenerationEU/PRTR) project, and Retos Investigación MOFSEIDON (grant PID2019-104228RB-I00 funded by MCIN/AEI/10.13039/501100011033) project. S.N. thanks financial support by Ministerio de Ciencia, Innovatión y Universidades RTI2018-099482-A-I00 project and Agència Valenciana de la Innovació (AVI, INNEST/2020/111) project. H.G. thanks financial support to the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-098237-CO21) and Generalitat Valenciana (Prometeo2017/083). T.W. acknowledges financial support from the Swedish Research Council (VR, 2019-05465). Parts of this research were carried out at “CRISTAL” at SOLEIL. P.S. and A.A.B. sincerely thank to the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020 for the support of the synchrotron experiment.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Co-Fe Clusters Supported on N-Doped Graphitic Carbon as Highly Selective Catalysts for Reverse Water Gas Shift Reaction

  • Peng, Lu
  • Jurca, Bogdan
  • Primo, Ana
  • Gordillo, Alvaro
  • Parvulescu, Vasile I.
  • García Gómez, Hermenegildo
Graphitic carbons are suitable supports of metal nanoparticles with catalytic activity. In the present study, the preparation of N-doped graphitic carbon supporting clusters of Fe-Co alloys starting from biomass waste is reported. These sub-nanometric Co-Fe clusters supported on N-doped graphitic carbon at a metal loading below 0.2 wt % exhibit high activity for the selective hydrogenation of CO2 to CO. Operating at 500 °C and 10 bar with an H2/CO2 molar ratio of 7 and a space velocity of 600 h-1, a conversion of 56% with a selectivity of over 98% to CO, and remarkable stability over 30 h operation was obtained. Interestingly, analogous catalysts based on N-doped graphitic carbon with much higher Co-Fe loadings and an average particle size range of 1-5 nm exhibit only half of this activity, with similar CO selectivity. This contrasting behavior reveals the dramatic effect of the particle size on the catalytic activity. In comparison, SiO2 as support under similar conditions affords CH4 as the main product., Financial support by the Spanish Ministry of Science, Innovation, and University (Severo Ochoa and RTI2018.98237-B-CO1) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. L.P. thanks the Generalitat Valenciana for a Santiago Grisolía scholarship. BASF is thanked for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High hydrogen release catalytic activity by quasi-MOFs preparedviapost-synthetic pore engineering

  • Bagheri, Minoo
  • Masoomi, Mohammad Y.
  • Domínguez, Esther
  • García Gómez, Hermenegildo
The catalytic activity of metal-organic frameworks (MOFs) depends largely on the presence of structural defects. In the present study, cobalt based metal-organic framework TMU-10, [Co(oba)(OH)(HO)(DMF)]·2DMF has been subjected to controlled thermolysis under air atmosphere at different temperatures in the range of 100-700 °C. This treatment results in the removal of ligands, and generation of structural defects and additional porosity in a controlled manner. The resulting materials, denoted as quasi MOFs according to the literature, were subsequently employed as catalysts for hydrogen release from NaBHby hydrolysis. The quasi TMU-10 framework obtained at 300 °C (QT-300) shows the highest turnover frequency of the series with a value of 13 333 mL mingat room temperature in the absence of a base, with an activation energy of 56.8 kJ mol. The simultaneous presence of micro- and mesopores in QT-300 with unsaturated Lewis acid sites on cobalt nodes due to the conversion of a fraction of Co(ii) centers to Co(iii) as well as the presence of tetrahedral Co(ii) sites is responsible for this catalytic behavior. The influence of the catalyst dosage and BHconcentration is in good agreement with the Langmuir-Hinshelwood model in which both reactants must be adsorbed onto the catalyst surface. Further investigation on the hydrolysis of the NaBH+ DO system presents a primary kinetic isotope effect indicating that water O-H bond cleavage occurs in the rate determining step., Support of this investigation by Arak University and Iran National Science Foundation (INSF) (grant No. 4000089) are gratefully acknowledged. Ministerio de Ciencia e Innovación (Severo Ochoa and RTI2018-98237-CO2-1) and Generalitat Valenciana (Prometeo 2017/083) are also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineering hydrogenation active sites on graphene oxide and N-doped graphene by plasma treatment

  • Magureanu, Monica
  • Mandache, N.B.
  • Rizescu, C.
  • Bucur, C.
  • Cojocaru, B.
  • Man, Isabela C.
  • Primo, Ana
  • Parvulescu, Vasile I.
  • García Gómez, Hermenegildo
Graphene oxide (GO) and N-doped graphene [(N)G] graphenes were submitted to H glow discharge under different discharge regimes, in both the negative glow and positive column plasma regions. The resulted catalysts were fully characterized using several techniques such as Raman, DRIFT and XPS spectroscopy, powder X-ray diffraction, H pulse chemisorption and H-, CO- and NH-TPD experiments. Density functional theory calculations were performed taking a slab model of graphene sheet with an optimized C[sbnd]C bond length (1.426 Å) and a 16 Å vacuum layer between sheets. An overview of these characterizations showed that the O/C atomic ratio of GO is influenced by the plasma regime, indicating the occurrence of O removal, as also predicted by DFT calculations. In the case of (N)G, the plasma treatment also removes pyridinic N with an increase of the C/N ratio. The efficiency of the plasma modification has been checked through catalytic tests in hydroisomerization of 1-octene and hydrogenation of α-methyl-styrene. Contrarily to classical thermal activation requiring high temperatures, the generation of the defects by treating with plasma occurs at voltages in the range of 2−5 kV. In consequence, the hydrogenation and isomerization of alkenes resulted with high yields and good selectivities. Graphene prepared from sodium alginate from brown algae was considered as reference in these investigations., This work was supported by the Romanian Ministry of Education and Research UEFISCDI (projects PN-III-P4-ID-PCE-2016-0146, nr. 121/2017, PN-III-P1-1.1-TE-2016-2191, nr. 89/2018 and 16N/2019) and by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-89237-CO2-R1). MM thanks Dr. F. Gherendi for the calibration of the OES system., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bifunctional metal-organic frameworks for the hydrogenation of nitrophenol using methanol as the hydrogen source

  • Melillo, A.
  • García-Vallés, Cristina
  • Ferrer, B.
  • Álvaro Rodríguez, Mercedes
  • Navalón, Sergio
  • García Gómez, Hermenegildo
This work reports the reduction of 4-nitrophenol to 4-aminophenol using UiO-66(Zr) as a bifunctional photocatalyst and hydrogenation catalyst using methanol as the hydrogen source. In particular, a series of UiO-66(Zr)-X (X: NH, NOand H) and MIL-125(Ti)-NHcatalysts have been screened as bifunctional catalysts for this process. UiO-66(Zr)-NHwas found to be the most active material to promote light-assisted nitro hydrogenation under both UV-Vis and simulated sunlight irradiation. The tandem reaction occursviahydrogen generation from a water/methanol mixture in the first step and, then, reduction of 4-nitrophenol to 4-aminophenol. UiO-66(Zr)-NHacts as a truly heterogeneous catalyst and can be reused several times without significant loss of activity, maintaining its crystallinity. This work shows the possibility of using MOFs as solar-driven bifunctional catalysts to promote the hydrogenation of organic compounds using methanol as the hydrogen source., S. N. acknowledges the financial support by the Fundación Ramón Areces (XVIII Concurso Nacional para la Adjudicación de Ayudas a la Investigación en Ciencias de la Vida y de la Materia, 2016), Ministerio de Ciencia, Innovación y Universidades RTI 2018-099482-A-I00 project and Generalitat Valenciana grupos de investigación consolidables 2019 (ref: AICO/2019/214) project. Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa and RTI2018-098237-B-C21) and Generalitat Valenciana (Prometeo 2017-083) is also gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microporous 3D graphitic carbons obtained by soft templating as carbocatalysts for aerobic oxidation

  • García-Mulero, Ana
  • García Baldoví, Hermenegildo
  • Dhakshinamoorthy, Amarajothi
  • Primo, Ana
  • Corma, Avelino
  • García Gómez, Hermenegildo
Herein it is reported that chitosan, a natural filmogenic biopolymer, can undergo soft-templating in liquid phase under hydrothermal conditions by two typical structure directing agents, namely hexamethyleneimine (HMI) and tetraethylammonium (TEA) employed in the synthesis of zeolites MCM-22 and Beta, respectively. After templation, pyrolysis of chitosan under inert atmosphere renders 3D graphitic sponges with defined ultra- and microporous channels. These porous structured graphitic carbons exhibit much enhanced activity as metal-free catalyst in the aerobic oxidation of benzylamine compared to other analogous 2D graphene oxide and reduced graphene oxide, as well as large area active carbons. It is proposed that this superior activity of these 3D structured microporous carbons derives from confinement effects activating molecular oxygen and benzylamine within the micropores. Quenching studies indicate that the reactive oxygen species are mostly adsorbed within the pores of the 3D graphitic carbons., Financial support by the Spanish Ministry of Science and Innovation (RTI2018-098237-CO2-R1 and Severo Ochoa) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cobalt-Based Metal Organic Frameworks as Solids Catalysts for Oxidation Reactions

  • Dhakshinamoorthy, Amarajothi
  • Montero-Lanzuela, E.
  • Navalón, Sergio
  • García Gómez, Hermenegildo
Metal organic frameworks (MOFs) are porous crystalline solids whose frameworks are constituted by metal ions/nodes with rigid organic linkers leading to the formation of materials having high surface area and pore volume. One of the unique features of MOFs is the presence of coordinatively unsaturated metal sites in their crystalline lattice that can act as Lewis acid sites promoting organic transformations, including aerobic oxidation reactions of various substrates such as hydrocarbons, alcohols, and sulfides. This review article summarizes the existing Co-based MOFs for oxidation reactions organized according to the nature of substrates like hydrocarbon, alcohol, olefin, and water. Both aerobic conditions and peroxide oxidants are discussed. Emphasis is placed on comparing the advantages of using MOFs as solid catalysts with respect to homogeneous salts in terms of product selectivity and long-term stability. The final section provides our view on future developments in this field., H.G. is thankful for financial assistance from the Spanish Ministry of Science and Innovation (Severo Ochoa and CTQ2018-980237-CO2-1) and Generalitat Valenciana (Prometeo 2017–083). A.D. is thankful for the University Grants Commission, New Delhi, for awarding an Assistant Professorship through the Faculty Recharge Programme. A.D. acknowledges financial assistance from the Science Engineering Research Board, India, through its Extra Mural Research project (EMR/2016/006500). S.N. is thankful for financial support by the Ministerio de Ciencia, Innovación y Universidades (RTI 2018-099482-A-I00 project), Fundación Ramón Areces (XVIII Concurso Nacional para la Adjudicación de Ayudas a la Investigación en Ciencias de la Vida y de la Materia, 2016) and Agencia Valenciana de la Innovación (AVI-GVA, Carboagua project, INNEST/2020/111)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reduced graphene oxides as carbocatalysts in acceptorless dehydrogenation of N-heterocycles

  • Mollar-Cuni, Andrés
  • Ventura Espinosa, David
  • Martín, Santiago
  • García Gómez, Hermenegildo
  • Mata, José A.
Thecatalytic properties of graphene-derived materials are evaluated in acceptorless dehydrogenation of N-heterocycles. Among them, reduced graphene oxides (rGOs) are active (quantitative yields in 23 h) under mild conditions (130 °C) and act as efficient heterogeneous carbocatalysts. rGO exhibits reusability and stability at least during eight consecutive runs. Mechanistic investigations supported by experimental evidence (i.e., organic molecules as model compounds, purposely addition of metal impurities and selective functional group masking experiments) suggest a preferential contribution of ketone carbonyl groups as active sites for this transformation., Supported by MCIN/AEI/10.13039/501100011033/FEDER (Grant Nos. RTI2018-098237-B-C21, RTI2018-098237-B-C22, and PID2019-105881RB-I00), Generalitat Valenciana (No. PROMETEU/2020/028), and Universitat Jaume I (No. UJI-B2018-23)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Band Engineering of Semiconducting Microporous Graphitic Carbons by Phosphorous Doping: Enhancing of Photocatalytic Overall Water Splitting

  • García-Mulero, Ana
  • Rendón-Patiño, Alejandra
  • Asiri, Abdullah M.
  • Primo, Ana
  • García Gómez, Hermenegildo
Carbon-based solar photocatalysts for overall water splitting could provide H2 as an energy vector in a clean and sustainable way. Band engineering to align energy levels can be achieved, among other ways, by doping. Herein, it is shown that phosphorous doping of microporous graphitic carbons derived from pyrolysis of α-, β-, and γ-cyclodextrin increases the valence band edge energy of the material, and the energy value of the conduction band decreases with the P content. In this way, P doping increases the activity of these metal-free materials in photocatalytic overall water splitting under simulated sunlight and visible-light illumination. The optimal P-doped photocatalyst in the absence of any metal as a cocatalyst affords, after 4 h of irradiation with simulated sunlight, a H2 production of 2.5 mmol of H2 × gcatalyst-1 in the presence of methanol as the sacrificial agent or 225 μmol of H2 × gcatalyst-1 from pure H2O., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI-2018-98237-CO2-R1) and Generalitat Valenciana (Prometeo 2021/038) is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fe clusters embedded on N-doped graphene as a photothermal catalyst for selective CO2hydrogenation

  • Szalad, Horatiu
  • Peng, Lu
  • Primo, Ana
  • Albero, J.
  • García Gómez, Hermenegildo
In comparison with the Co analog, small Fe clusters incorporated in a graphene matrix exhibit a photo-assisted increase of 110% in reverse water gas shift COhydrogenation under UV-Vis light irradiation. Available data indicate that the photo-assistance derives from light absorption by the N-doped graphene followed by charge recombination at the Fe clusters, increasing their local temperature., Financial support by the Spanish Ministry of Science and Innovation (RTI2018-98237-CO2-1) and Generalitat Valenciana (Prometeo 2017-083) is gratefully acknowledged. This project has also received funding from the European Union’s Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No. 861151., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-current water electrolysis performance of metal phosphides grafted on porous 3D N-doped graphene prepared without using phosphine

  • Hu, Jiajun
  • Peng, Lu
  • Primo, Ana
  • Albero, J.
  • García Gómez, Hermenegildo
Development of efficient and stable electrodes for hydrogen and oxygen evolution from water constituted of abundant elements and prepared by sustainable and scalable procedures is of considerable importance for producing green hydrogen from renewable electricity. Herein, a method for the preparation of NiP, FeP, and FeP supported on N-doped graphene (NiP/NG and FeP/NG) is reported. The procedure uses metal salts, phosphorous oxide, and chitosan as precursors of metal phosphide and N-doped graphene, avoiding the use of undesirable and hazardous precursors, such as PH or NaHPO, and rendering a material with a strong metal phosphide-graphene interaction. Moreover, NiP/NG and FeP/NG electrodes are demonstrated to be more efficient than the benchmark catalysts Pt/C and RuO, for hydrogen evolution reaction and oxygen evolution reaction, respectively, at a large current density (300 mA/cm). In addition, water electrolysis was carried out using NiP/NG//FeP/NG electrodes, also demonstrating improved efficiency and stability compared with Pt/C//RuO at a current density (400 mA/cm) near industrial requirements., Financial support by the ‘‘MCIN/AEI/10.13039/501100011033/ y por FEDER Una manera de hacer Europa’’ (RTI2018-098237-B-C21) and Generalitat Valenciana (Prometeo 2021-038) are gratefully acknowledged. The European Union project H2020-LC-SC3-2020-RES-RIA ‘‘EcoFuel’’(grant agreement 101006701)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Doped microporous graphitic carbons as metal-free catalysts for the selective hydrogenation of alkynes to alkenes

  • Primo, Ana
  • Rendón-Patiño, Alejandra
  • Bucur, C.
  • Jurca, Alina
  • Cojocaru, Bogdan
  • Parvulescu, Vasile I.
  • García Gómez, Hermenegildo
Microporous graphitic carbons obtained by pyrolysis of α-cyclodextrin have been conveniently doped with N and P elements by performing the thermal graphitization adding urea or phosphoric acid as source of these elements. Electron microscopy shows that doping does not influence the structure and dimensions of the micropores, while XPS reveals the distribution of these dopant elements in two main families corresponding to pyridinic and pryrrolic N atoms and to triphenylphosphine and triphenylphosphine oxide for P doping. Thermo-programmed desorption of H CO and NH indicates that the presence of dopant element is responsible for chemisorption of these gases and introduces basic and acid sites. These desorption measurements agree with the catalytic performance of the series of carbons for the chemo and stereo selective hydrogenation of internal aliphatic and aromatic alkynes to cis configured alkenes. N/P doped microporous carbons were found to be stable under the reaction conditions, according to the constant TOF values and XRD and XPS characterization of the materials after their use as catalysts. In addition microporosity appears to play a positive effect by comparing the activity of microporous carbons with the performance of analogous N/P-doped graphenes., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-98237-CO2-1) and the Generalitat Valenciana (Prometeo 2021/038) is gratefully acknowledged. V.P. acknowledge support from UEFISCDI (PN-III-P4-ID-PCE-2016-0146, 121/2017 and PN-III-P4-ID-PCE-2020-1532).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Increased photocatalytic activity and selectivity towards methane of trimetallic NiTiAl-LDH

  • Molina-Muriel, Manuel
  • Peng, Y.
  • García Gómez, Hermenegildo
  • Ribera, Antonio
Layered double hydroxides is a rising family of materials with interesting photocatalytic properties that are starting to be employed on the CO photoreduction to useful chemicals. However, the selectivity control towards high energy value products, such as methane or methanol, is one of the main issues of this process due to the easier formation of CO, which requires fewer electrons to be transferred, and the competition of hydrogen evolution reaction. In this work, a new LDH material containing Ni, Ti and Al within the structure was synthesised with the purpose of increasing the selectivity towards methane production. The material was tested under solar simulator conditions, yielding a methane production of 148 µmol g h, with a selectivity of 86%, one of the highest values reported for this kind of material, while the competition from hydrogen evolution was almost suppressed. The role of Ti directing the selectivity towards methane was confirmed, since no CH was produced when NiAl-LDH catalyst was used instead., We thank the grant CTQ2017-87201-P, Severo Ochoa and RTI2018.98237-B-CO1 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” for financial support. Generalitat Valenciana (Prometeo 2017/083 and Prometeo 2019/076) is also gratefully acknowledged. M.M. thanks the Universitat Politecnica de Valencia for a postgraduate scholarship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Remarkable Activity of 002 Facet of Ruthenium Nanoparticles Grown on Graphene Films on the Photocatalytic CO2 Methanation

  • Anouar, A.
  • García-Aboal, R.
  • Atienzar, Pedro
  • Franconetti, A.
  • Katir, N.
  • El Kadib, A.
  • Primo, Ana
  • García Gómez, Hermenegildo
In the context of diminishing atmospheric CO emissions, there is an urgent need to develop processes that can be carried out at a scale commensurate with appropriate CO volumes. One possible reaction is the transformation of CO to methane (Sabatier reaction). Due to its chemical stability, catalytic CO hydrogenation to methane is carried out at temperatures of 450 °C or higher and pressures above 5 bars, thus, requiring a significant energy input. One alternative possibility to conventional thermal catalysis is the use of solar light as the primary energy, performing the photocatalytic CO hydrogenation. In this broad context, the present study shows the photocatalytic activity of nanometric films of oriented Ru nanoparticles (NPs) strongly grafted on defective graphene. These graphene films (thinner than 20 nm) containing Ru NPs nanoplatelets (less than 2 nanomol/cm) are among the most active photocatalysts ever prepared for CO hydrogenation and operate through photoinduced charge separation., Support by the Ministerio de Ciencia e Innovación (Severo Ochoa and RTI2018-098237-B-C21) and Generalitat Valenciana (Prometeo 2017/083) was acknowledged. Thanks are due to Galicia Supercomputing Center. A.A. thanks UEMF (Euromed Unniversity Fes) and UPV for an Erasmus+ 2019-1-ES01-KA107-062073 Scholarship. A.P. thanks the Spanish Ministry for a Ramón y Cajal
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanometer-thick defective graphene films decorated with oriented ruthenium nanoparticles. Higher activity of 101 vs 002 plane for silane-alcohol coupling and hydrogen transfer reduction

  • Anouar, A.
  • Ramírez Grau, Rubén
  • Katir, N.
  • Franconetti, Antonio
  • El Kadib, A.
  • Primo, Ana
  • García Gómez, Hermenegildo
Pyrolysis of ammonium alginate films containing Ru(NH)Cl leads to the formation of Ru nanoparticles (NPs) supported on defective graphene films. The procedure allows controlling the preferential facet orientation of small Ru NPs (5–20 nm), either 002 when the pyrolysis is carried out under Ar atmosphere or the 002 and 101 planes for pyrolysis in the presence of H. Ru is a metal difficult to prepare in preferential facet orientation compared to noble metals due to its higher reactivity and smaller particle size. Theoretical calculations substantiated the inhibition of Ru(0 0 2) growth by H adsorption, with restructuration to Ru(002–101) NPs. The defective graphene films of about 15 nm thickness containing one of the two types of Ru NPs (150 ng/cm) exhibit distinctive catalytic activity for the dehydrogenative coupling of silanes and alcohols and hydrogen transfer reduction of cyclohexanone. Comparison of turnover frequencies indicates that the 101 facet is more efficient than the 002 plane. Overall, this study illustrates that pyrolysis conditions can control the preferential crystallographic orientation of the growing Ru NPs and the relative catalytic activity of their specific crystallographic planes., Support by the Ministerio de Ciencia e Innovación (Severo Ochoa and RTI2018-098237-B-C21) and Generalitat Valenciana (Prometeo 2017/083) is acknowledged. Thanks are due to Galicia Supercomputing Center. AA thanks UEMF and UPV for an Erasmus + 2019-1-ES01-KA107-062073 Scholarship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photocatalytic Water Splitting Promoted by 2D and 3D Porphyrin Covalent Organic Polymers Synthesized by Suzuki-Miyaura Carbon-Carbon Coupling

  • Novoa-Cid, María
  • Melillo, A.
  • Ferrer, B.
  • Álvaro Rodríguez, Mercedes
  • García Baldoví, Hermenegildo
This work deals with the synthesis of metal-free and porphyrin-based covalent organic polymers (COPs) by the Suzuki–Miyaura coupling carbon-carbon bond forming reaction to study the photocatalytic overall water splitting performance. Apart from using 5,10,15,20-Tetrakis-(4-bromophenyl)porphyrin, we have chosen different cross-linker monomers to induce 2-dimensional (2D) or 3-dimensional (3D) and different rigidity in their resulting polymeric molecular structure. The synthesised COPs were extensively characterised to reveal that the dimensionality and flexibility of the molecular structure play an intense role in the physical, photochemical, and electronic properties of the polymers. Photoinduced excited state of the COPs was evaluated by nanosecond time-resolved laser transient absorption spectroscopy (TAS) by analysing excited state kinetics and quenching experiments, photocurrent density measurements and photocatalytic deposition of Ru to RuO and photocatalysis. In summary, TAS experiments demonstrated that the transient excited state of these polymers has two decay kinetics and exhibit strong interaction with water molecules. Moreover, photocurrent and photocatalytic deposition experiments proved that charges are photoinduced and are found across the COP molecular network, but more important charges can migrate from the surface of the COP to the medium. Among the various COPs tested, COP–3 that has a flexible and 3D molecular structure reached the best photocatalytic performances, achieving a photocatalytic yield of 0.4 mmol H × g after 3 h irradiation., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa with grant code RTI2018-098237-CO21), Generalitat Valenciana (Prometeo 2017/083) and European Union [APOSTD2018/216] are gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymeric triazine/heptazine imide heterostructures enable photocatalytic O2 reduction to H2O2

  • Szalad, Horatiu
  • Galushchinskiy, Alexey
  • Jianu, Teodor
  • Roddatis, Vladimir
  • Tarakina, Nadezda V.
  • Savateev, Oleksandr
  • Antonietti, Markus
  • Albero, J.
  • García Gómez, Hermenegildo
Heptazine-based carbon nitrides are a class of transition metal free semiconductors, which are extensively studied in various photocatalytic processes. The localized nature of the excitons, incomplete exciton conversion into the charge-separated state and the recombination of the charge carriers are the factors that limit performance of the pristine heptazine-based carbon nitrides. Herein, we design heterojunctions composed of poly(triazine imide) intercalated by LiCl and poly(heptazine imide) phases. The donor-acceptor character of the heterojunctions improves the charge separation yield. The heterojunction with the optimal composition of the phases shows an apparent quantum yield of HO formation of 14 % at 365 nm and 7 % at 465 nm, while the HO production rate reaches 7.8 mol L g h (39 mmol L h produced by 5 mg of photocatalyst) in batch and 15.9 mol kg h in flow using a packed-bed photoreactor. The heterojunction undergoes photocharging under anaerobic conditions. The charges stored in the material after irradiation enable O reduction to HO in the dark with the rate 367 µmol g h (1.8 µmol h stored in 5 mg of photocatalyst)., This work was part of the Solar2Chem ITN project funded by the EU. Financial support by the Ministry of Science and Innovation (Severo Ochoa CEX2021–001230-S and RTI2018–89237-CO2–1, both funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021–38) is gratefully acknowledged. This study forms part of the Advanced Materials programme Graphica MFA/2022/023 and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021–031006-I funded by MCIN/AEI/10.13039/501100011033 and by “European Union NextGenerationEU/PRTR), and the financial support (PID2022-141099OA-I00 funded by MCIN/AEI/10.13039/501100011033 and, by “European Union NextGenerationEU/PRTR). We gratefully acknowledge The Max Planck Society for financial support., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Reduced graphene oxides as carbocatalysts in acceptorless dehydrogenation of N-heterocycles

  • Mollar-Cuni A.
  • Ventura-Espinosa D.
  • Martín S.
  • García H.
  • Mata J.A.
The catalytic properties of graphene-derived materials are evaluated in acceptorless dehydrogenation of N-heterocycles. Among them, reduced graphene oxides (rGOs) are active (quantitative yields in 23 h) under mild conditions (130 °C) and act as efficient heterogeneous carbocatalysts. rGO exhibits reusability and stability at least during eight consecutive runs. Mechanistic investigations supported by experimental evidence (i.e., organic molecules as model compounds, purposely addition of metal impurities and selective functional group masking experiments) suggest a preferential contribution of ketone carbonyl groups as active sites for this transformation. ©