Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Carbon-Phosphorus-Nitrogen Materials as Highly Thermally Stable Catalyst Supports for CO2 Hydrogenation to Methanol

  • Azoulay, Adi
  • Azaria, Noa
  • Tzadikov, Jonathan
  • Tashakory, Ayelet
  • Karjule, Neeta
  • Hayun, Shmuel
  • Shalom, Menny
  • García-Baldoví, Alberto
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The direct conversion of CO2 into methanol through hydrogenation reactions by heterogeneous catalysts is considered a promising green approach for fuel production. The most researched catalyst for methanol formation is Cu, usually in combination with other metals dispersed on different substrates. However, several challenges, such as the low stability, activity, and selectivity of the catalyst, hinder further progress. Here, we present catalysts consisting of Cu and Fe nanoparticles deposited on lightweight carbon-phosphorous-nitrogen (CPN) materials as the support for CO2 hydrogenation to methanol. Detailed analysis reveals a correlation between the elemental composition of the CPN supports and their CO2 adsorption capability, which benefits CO2 conversion to methanol. The unique elemental composition ensures uniform dispersion of both Cu and Fe nanoparticles on CPN and prevents the oxidation of the Cu active sites during the reaction. The best performing sample of the catalysts exhibits a remarkable methanol production yield of 9.82 mol kgcat-1 h-1 at 250 degrees C under 20 bar, with good methanol selectivity, negligible CO formation, and good stability for 12 h under harsh conditions., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (grant agreement no. [849068]). The research was partly funded by the following: the Planning & Budgeting Committee/Israel Council for Higher Education (CHE) and Fuel Choice Initiative (Prime Minister Office of Israel), within the framework of "Israel National Research Center for Electrochemical Propulsion" (INREP); the Minerva Center no. 117873; the Israel Science Foundation grant no. 601/21; and the Spanish Ministerio de Economi ' a y Competitividad (MAT2016-77608-C3-1-P and MAT2016-75883-C2-2-P); J.A. and H.G. also gratefully acknowledges financial support from the Spanish Ministry of Economy and Competitiveness (Severo Ochoa SEV2016-0683 and RTI2018-89023-CO2-R1) and by the Generalitat Valenciana (Prometeo 2017-083).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tridimensional N, P-Codoped Carbon Sponges as Highly Selective Catalysts for Aerobic Oxidative Coupling of Benzylamine

  • Peng, Lu
  • Garcia-Baldovi, Hermenegildo
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Two tridimensional N-doped porous carbon sponges (3DC-X) have been prepared by using cetyltrimethylammonium chloride ( CTAC) and cetyltrimethylammonium bromide (CTAB) as soft templates and alginate to replicate the liquid crystals formed by CTA+ in water. Alginate is a filmogenic polysaccharide of natural origin having the ability to form nanometric defectless films around objects. Subsequent pyrolysis at 900 degrees C under an Ar flow of the resulting CTA(+)-polysaccharide assemblies result in 3DC-1 and 3DC-2, with the N percentages of 0.48 and 0.36 wt % for the materials resulting from CTAC and CTAB, respectively. Another four 3DC materials were obtained via pyrolysis of the adduct of phytic acid and chitosan, rendering an amorphous, N and P-codoped carbon sample (3DC-3 to 3DC-6). The six 3DC samples exhibit a large area (>650 m(2) x g(-1)) and porosity, as determined by Ar adsorption. The catalytic activity of these materials in promoting the aerobic oxidation of benzylamine increases with the specific surface area and doping, being the largest for 3DC-4, which is able to achieve 73% benzylamine conversion to N-benzylidene benzylamine in solventless conditions at 70 degrees C in 5 h. Quenching studies and hot filtration tests indicate that 3DC-4 acts as a heterogeneous catalyst rather than an initiator, triggering the formation of hydroperoxyl and hydroxyl radicals as the main reactive oxygen species involved in the aerobic oxidation., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa 2016 and RTI2018-890237-CO2-R1) and Generalitat Valenciana is gratefully acknowledged. A.P. thanks the Spanish Ministry for a Ramon y Cajal Research associate contract. A.D. is thankful to the University Grants Commission, New Dekhi, for awarding Assistant Professorship through the Faculty Recharge Programme.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal organic frameworks as solid catalysts for liquid-phase continuous flow reactions

  • Dhakshinamoorthy, Amarajothi
  • Navalón, Sergio
  • Asiri, Abdullah M.
  • García Gómez, Hermenegildo
A. D. thanks the University Grants Commission, New Delhi, for the award of an Assistant Professorship under its Faculty Recharge Programme. A. D. also thanks the Department of Science and Technology, India, for the financial support through Extramural Research Funding (EMR/2016/006500). Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa and RTI2018-890237-CO2-R1) and Generalitat Valenciana (Prometeo 2017-083) is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface Silylation of Hybrid Benzidinium Lead Perovskite and its Influence on the Photocatalytic Activity

  • Peng, Y.
  • Albero, J.
  • García Gómez, Hermenegildo
ments Financial support from the Spanish Ministry of Economy and Competitiveness (Severo Ochoa, and RTI2018-890237-CO2-R1) and the Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. Yong Peng also thanks the Universitat Politecnica de Valencia for a predoctoral schol
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of metal-free lightweight materials with sequence-encoded properties

  • Azoulay, A.
  • Barrio, Jesús
  • Tzadikov, J.
  • Volokh, M.
  • Albero, J.
  • Gervais, C.
  • Amo-Ochoa, Pilar
  • García Gómez, Hermenegildo
  • Zamora, Felix
  • Shalom, Menny
A high-temperature solid-state synthesis is a widespread tool for the construction of metal-free materials, owing to its simplicity and scalability. However, no method is currently available for the synthesis of metal-free materials, which enables control over the atomic ratio and spatial organization of several heteroatoms. Here we report a general and large-scale synthesis of phosphorus-nitrogen-carbon (PNC) materials with highly controllable elemental composition and structural, electronic, and thermal stability properties. To do so, we designed four different crystals consisting of melamine and phosphoric acid with different monomers sequences as the starting precursors. The monomer sequence of the crystals is preserved upon calcination (up to 800 °C) to an unprecedented degree, which leads to precise control over the composition of the final PNC materials. The latter exhibit a remarkable stability up to 970 °C in air, positioning them as sustainable, lightweight supports for catalysts in high-temperature reactions as well as halogen-free fire-retardant materials., The authors would like to thank Dr Volodiya Ezersky, Dr Natalya Froumin, Dr Anna Milionshchik, Dr Radion Vainer, Dr Einat Nativ-Roth, and Mr Nitzan Shauloff for analytical HRTEM, XPS, TGA, SC-XRD, HRSEM, and technical support, respectively. This research was partly funded by the following: the Planning & Budgeting Committee/Israel Council for Higher Education (CHE) and Fuel Choice Initiative (Prime Minister Office of Israel), within the framework of “Israel National Research Center for Electrochemical Propulsion” (INREP); the Minerva Center No. 117873; the Spanish Ministerio de Economía y Competitividad (MAT2016-77608-C3-1-P, MAT2016-75883-C2-2-P); J. A. and H. G. also gratefully acknowledges financial support from the Spanish Ministry of Economy and Competitiveness (Severo Ochoa SEV2016-0683 and RTI2018-89023-CO2-R1) and by the Generalitat Valenciana (Prometeo 2017-083). This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 Research and Innovation Programme (grant agreement No. [849068]). NMR spectroscopic calculations were performed using HPC resources from GENCI-IDRIS (Grant 097535). The French Region Ile de France-SESAME program is acknowledged for financial support (700 MHz spectrometer).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis, post-synthetic modification and stability of 2D styrylammonium lead iodide hybrid material

  • Peng, Y.
  • Albero, J.
  • García Gómez, Hermenegildo
Financial support from the Spanish Ministry of Economy and Competitiveness (Severo Ochoa SEV2016, and RTI2018-890237-CO2-R1) and the Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. Yong Peng also thanks the Universitat Politecnica de Valencia for a predoctoral scholarship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bimetallic iron-copper oxide nanoparticles supported on nanometric diamond as efficient and stable sunlight-assisted Fenton photocatalyst

  • Manickam-Periyaraman, P.
  • Espinosa López, Juan Carlos
  • Ferrer, B.
  • Subramanian, S.
  • Álvaro Rodríguez, Mercedes
  • García Gómez, Hermenegildo
  • Navalón, Sergio
Bimetallic iron and copper oxide nanoparticles (NPs) supported on hydroxylated diamond (D3) exhibits an improved activity for the heterogeneous Fenton phenol degradation under natural or simulated sunlight irradiation with respect to analogous monometallic samples or than analogous FeCu NPs on graphite, activated carbon and P25 TiO semiconductor. FeCu/D3 catalyst exhibits good recyclability and stability especially working at pH 6. Overall, the high activity of the FeCu(0.2 wt%)/D3 catalyst is mainly due to the combination of the high activity of reduced copper species decomposing HO to HO radical, while Fe allows the regeneration of these reduced copper species., S.N. thanks financial support by the Fundación Ramón Areces (XVIII Concurso Nacional para la Adjudicación de Ayudas a la Investigación en Ciencias de la Vida y de la Materia, 2016), Ministerio de Ciencia, Innovación y Universidades RTI2018-099482-A-I00 project and Generalitat Valenciana grupos de investigación consolidables 2019 (ref: AICO/2019/214) project. H.G. thanks financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa SEV2016 and RTI2018-890237-CO2-1) and Generalitat Valenciana (Prometeo 2017/083) is also gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large area continuous multilayer graphene membrane for water desalination

  • Presumido, P.H.
  • Primo, Ana
  • Vilar, V.J.P.
  • García Gómez, Hermenegildo
This manuscript reports the preparation of a large area (84 cm) desalination membrane based on multilayers (11 nm thickness) of B,N-codoped defective graphene. The process consists of coating a porous ceramic α-AlO support (100 nm pore size) with a continuous nanometric (50 nm) chitosan film containing adsorbed (NH)BO. Subsequent pyrolysis in the presence of hydrogen converts chitosan into multilayer defective B,N-codoped graphene. The partial removal of B and N dopant atoms by H during the pyrolysis causes the generation of subnanometric pores due to atom vacancy, as determined by control experiments in the absence of this gas. A NaCl and KCl removal efficiency from brackish water higher than 95% for a permeate flux of 24.3 L m h at 10 bars were achieved., This work was financially supported by: i) Project NOR-WATER funded by INTERREG VA Spain-Portugal cooperation programme, Cross-Border North Portugal/Galiza Spain Cooperation Program (POCTEP) and ii) Base Funding - UIDB/50020/2020 of the Associate Laboratory LSRE-LCM - funded by national funds through FCT/MCTES (PIDDAC). P.H. Presumido acknowledges FCT for his scholarship (SFRH/BD/138756/2018). V.J.P. Vilar acknowledges the FCT Individual Call to Scientific Employment Stimulus 2017 (CEECIND/01317/2017). Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa SEV2016 and RTI2018-890237-CO2-R1) and Generalitat Valenciana (Prometeo 2017-83) is also gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanometer-thick films of antimony oxide nanoparticles grafted on defective graphenes as heterogeneous base catalysts for coupling reactions

  • Simion, A.
  • Candu, N.
  • Cojocaru, Bogdan
  • Coman, S.
  • Bucur, C.
  • Forneli, Amparo
  • Primo, Ana
  • Man, Isabela C.
  • Parvulescu, Vasile I.
  • García Gómez, Hermenegildo
Films of few-layers defective N-doped or undoped graphene (10–15 nm) containing antimony oxide nanoparticles (15–30 nm) have been prepared on quartz by pyrolysis of alginate or chitosan adsorbing Sb(OAc). XPS shows that the prevalent Sb oxidation state is +III, while thermoprogrammed CO desorption shows that these films exhibit basic sites. These thin films have used as basic catalysts to promote the Michael addition of active methylene compounds and the Henry condensation. These results have been rationalized by DFT calculations that have shown that undercoordinated or two-fold coordinated oxygen atoms on SbOx clusters can act as basic sites, providing a wide range of basic strength., This work was supported by UEFISCDI (PN-III-P4-ID-PCE-2016-0146, nr. 121/2017 and project number PN-III-P1-1.1-TE-2016-2191, nr. 89/2018) and by the Spanish Ministry of Science and Innovation (Severo Ochoa and RTI2018-890237-CO2-1).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porous Single-Crystal-Based Inorganic Semiconductor Photocatalysts for Energy Production and Environmental Remediation: Preparation, Modification, and Applications

  • Niu, Jinan
  • Albero, J.
  • Atienzar, Pedro
  • García Gómez, Hermenegildo
Semiconductor photocatalytic and photovoltaic performance depends on crystallinity and surface area to a large extent. One strategy that has recently emergyed to improve semiconductor photoresponse efficiency is their synthesis as porous single crystals (PSCs), therefore providing simultaneously high crystallinity, minimization of grain boundaries, and large specific surface area. Other factors, such as high density of active sites, and enhanced light absorption, also contribute to increased PSC photoresponse with respect to analogous bulk or amorphous materials. This review initially presents the concept and main properties of PSCs. Then, the synthetic routes and the applications as photocatalysts and as photovoltaic devices, mainly in sunlight applications, are summarized. The synthetic procedures have been classified according to the mechanism of pore generation. Applications cover photocatalysis for environmental remediation, solar fuels production, selective photooxidation of organic compounds, and photovoltaic devices. Finally, a summary and views on future developments are provided. The purpose of this review is to show how the use of PSCs is a powerful general methodology applicable beyond metal oxides and can ultimately lead to sufficient photoresponse efficiency, bringing these processes close to commercial application., Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa SEV2016‐0683 and RTI2018‐89023‐CO2‐R1) and by the Generalitat Valenciana (Prometeo 2017–083) is gratefully acknowledged. J.N. also gratefully acknowledges financial support from the Fundamental Research Funds for the Central Universities (2019XKQYMS76).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Templateless Synthesis of Ultra-Microporous 3D Graphitic Carbon from Cyclodextrins and Their Use as Selective Catalyst for Oxygen Activation

  • Rendón-Patiño, Alejandra
  • Santiago-Portillo, Andrea
  • Vallés-García, C.
  • Palomino, Miguel
  • Navalón, Sergio
  • Franconetti, Antonio
  • Primo, Ana
  • García Gómez, Hermenegildo
Pyrolysis of α-, β-, and γ-cyclodextrins at 900 °C gives rise to the formation of crystalline graphitic porous nanoparticles (G), where the dimensions of the pores are uniform in the range from 0.63 to 0.97 nm, from G to G, as determined by transmission electron microscopy. It is found that, while for G and G, the surface area measured by N adsorption is about 330–550 m g, respectively, no area can be measured for G with N or Ar due to its small pore dimensions. However, CO adsorption reveals for G the presence of ultra-microporosity and a surface area of 727 m g. G exhibits activity as metal-free catalysts for the aerobic oxidation of alcohols and the activity increases as the pore dimension decreases. Density functional theory calculations indicate that this high catalytic activity for O activation derives from confinement effects that favor charge transfer from the graphitic walls to O. Studies on the formation mechanism shows that the key step leading to the formation of the channels is the melting of cyclodextrin precursors that makes possible the assembly of these capsules before their transformation into microporous graphitic particles., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and Grant No. RTI2018‐890237‐CO2‐1) and Generalitat Valenciana (Prometeo Grant No. 2017‐083) is gratefully acknowledged. A.R.P. thanks the Spanish Ministry of Education for a Ramon y Cajal research associate contract. S.N. thanks financial support by the Fundación Ramón Areces (XVIII Concurso Nacional para la Adjudicación de Ayudas a la Investigación en Ciencias de la Vida y de la Materia, 2016), Ministerio de Ciencia, Innovación y Universidades Grant No. RTI2018‐099482‐A‐I00 project and Generalitat Valenciana grupos de investigación consolidables 2019 (ref: Grant No. AICO/2019/214) project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Catalytic transformation of the marine polysaccharide ulvan into rare sugars, tartaric and succinic acids

  • Podolean, I.
  • Coman, S.M.
  • Bucur, C.
  • Teodorescu, C.
  • Kikionis, Stefanos
  • Ioannou, E.
  • Roussis, V.
  • Primo, Ana
  • García Gómez, Hermenegildo
  • Parvulescu, Vasile I.
The green macroalga Ulva rigida represents a promising feedstock for biorefinary due to its fast growth and cosmopolitan distribution. The main component of the cell walls of U. rigida is a sulfated glucuronorhamnan polysaccharide known as ulvan. Herein it was found that due to the high (hydrogen)sulfate group content of ulvan, hydrothermal autohydrolysis at 130 °C renders a high percentage of rhamnose (78–79 % recovery from the initial content in the raw material), a rare sugar of high added value. In addition, acid catalysis by a triflate-based graphene oxide under oxygen-free conditions at 180 °C affords moderate amounts of tartaric acid (24–26 %). The same triflate-based graphene oxide catalyst under oxygen pressure yields remarkably high percentages of succinic acid (65 %). The catalyst preserves its activity for at least five consecutive reuses., Financial support by the Spanish Ministry of Economy and Competitiveness (Severo Ochoa SEV2016-0683, RTI2018-890237-CO2-R1) and Generalitat Valenciana (Prometeo 2017−083) is gratefully acknowledged. Vasile I. Parvulescu kindly acknowledges UEFISCDI for financial support (project PN-III-P4-ID-PCE-2016-0146, Nr. 121/2017).