Pasar al contenido principal

APLICANDO MXENOS COMO CATALIZADORES DEFINITIVOS PARA LA PRODUCCION DE COMBUSTIBLES SOLARES

PID2021-126071OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 70
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Liquid phase laser ablation as a general green physical etching method to prepare MXene dots with arbitrary surface functionalization. Implications in overall water splitting photocatalysis

  • Ramírez-Grau, Rubén
  • Cabrero-Antonino, Maria
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Rey Cortes, Francís
  • Mínguez-Vega, Gladys
  • Quesne, Matthew G.
  • Catlow, C. Richard A.
  • Mata, Jose A.
[EN] A novel green, fluoride-free etching method allowing installation of surface groups at will for the preparation 0D MXene dots with notable photocatalytic activity is reported. The method consists in the liquid-phase laser ablation using a pulsed Nd-YAG laser (532 nm, 7 ns fwhp, 30 mJ pulse(-1), 10 Hz) that produces the physical Al etching of the Ti3AlC2 precursor forming nanometric Ti3C2 particles. Simultaneously with etching, the surface of the MXene dots become functionalized with organic moieties inherited from the liquid phase as confirmed by XPS and in several cases by FT-IR spectroscopy. The lateral particle size of the Ti3C2 dots depends on the viscosity of the liquid medium and varies from a few nm to above 50 nm. Crystallinity and structure of the Ti3C2 dot is confirmed by high resolution TEM and by selected area electron diffraction of the samples. Ti3C2 dots promote photocatalytic overall water splitting into H-2 and O-2, the activity depending on the nature of the surface terminal groups. However, upon reuse the Ti3C2 dots become significantly degraded into amorphous material, decreasing gradually in photocatalytic activity. This degradation is proposed to be caused by self-oxidation of Ti3C2 dots by the photogenerated holes, as evidenced by the fact that the use of methanol as hole quencher stops deactivation during H-2 production. In sharp contrast with the decay in photocatalytic activity the presence of hole quenchers, the Ti3C2 dots even increase substantially their photocatalytic activity upon reuse, a fact that has been attributed to the optimization of the nature of the surface terminal groups during the photocatalytic process., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 and PDI2021-0126071-OB-CO22 funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) and European Commission (ERC Discovery) are gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Light-assistance in nitrogen fixation to ammonia by highly dispersed Cs-promoted Ru clusters supported on ZrO2

  • Yong, Peng
  • Shi, Run
  • Antonio Franconetti
  • Melillo, Arianna
  • Forneli Rubio, Mª Amparo
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Light-assisted N-2 fixation to NH3 under mild conditions is attracting massive attention to circumvent energy crisis and global warming. Herein, highly dispersed Cs-decorated Ru sub-nanometric clusters supported on ZrO2 NPs have been prepared by means of MOF-templated transformation method. The obtained catalyst exhibited N-2 hydrogenation activity of 1.6 mmolNH3 g(cat)(-1) h (-1) in the dark (350.C, 0.1 MPa). Remarkably this value increased by over 300 %, reaching 5.1 mmolNH3 g(cat)(-1) h (-1) (204 mmolNH3 g(Ru)(-1) h (-1)) under 1 Sun power illumination (1080 W/ m2) The influence of the incident light wavelength has been evaluated, revealing 81 % and 213 % enhancement in the NIR and visible region, respectively. DFT calculations were carried out to understand the static adsorption states of Ru sub-nanoclusters. Mechanistic studies have confirmed the co-existence of a photothermal and a nonthermal-hot electron mechanism. XPS, PXRD and FTIR analysis have determined that the Cs species block surface Zr4+ acidity, increasing the basicity of the ZrO2 support. Moreover, partially reduced Cs delta+ (0 <delta < 1) species surrounding the Ru active sites are donating electron density to the adjacent Ru sites, favoring N-2 adsorption and subsequent activation. Finally, this photocatalyst has shown an extended stability for 100 h irradiation under continuous flow., Financial support by the Spanish Ministry of Science and Innovation (PDI2021-126071-OB-C21 financed support by MCIN/AEI/10.13039/ 501100011033 and by FEDER "Una manera de hacer Europa"), and Severo Ochoa (CEX2021-1230-S financed support by MCIN/AEI/ 10.13039/501100011033) is gratefully acknowledged. Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) and European Union Horizon 2020 Research and Innovation Programme (Flow-PhotoChem Grant Agreement 862453) are also gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MOF-derived ZnO-promoted NiCoP nanoparticles as efficient anodes for battery-supercapacitor hybrid devices

  • Hu, Jiajun
  • Rendon-Patiño, Alejandra
  • Khan, Il Son
  • Garzon-Tovar, Luis
  • Mateo, Diego
  • Gascon, Jorge
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Battery-supercapacitor hybrid devices are very convenient energy storage devices since they offer the combined advantages of both batteries (excellent energy density) and supercapacitors (high power density, long service life and high reversibility). However, cost-effective electrodes based on abundant and non-toxic materials exhibiting high energy storage density are still to be discovered. Herein, we have prepared ZnO promoted-NiCoP nanoparticles supported on graphitic carbon (ZnNiCoP/C) from heterotrimetallic MOF-74 derivatization. The electrochemical properties for energy storage of the resulting material have been investigated. The performance of ZnNiCoP/C as hybrid anode displays an improved capacity (343.3 mA & sdot;h & sdot;g- 1 at 2 A & sdot;g- 1) compared with its bimetallic counterparts. Performance-structure relationships have been established, demonstrating that ZnO works cooperatively with NiCoP maintaining the structural properties of the MOF-74 precursor, while the NiCoP particles have been determined as the electrochemically active sites. Moreover, complete asymmetric batterysupercapacitor hybrid devices have been fabricated comprising ZnNiCoP/C as anode and a N-doped carbon cathode, obtaining energy densities from 44.6 W & sdot;h & sdot;Kg- 1 at 1500 W & sdot;Kg- 1 using a liquid electrolyte, and 35.4 W & sdot;h & sdot;Kg- 1 at 1500 W & sdot;Kg- 1 with a quasi-solid-state electrolyte, highlighting the applicability of this material in energy storage applications. Furthermore, the fabricated device has demonstrated to retain more than 90 % of its initial performance after 5000 charge-discharge cycles, highlighting the stability of this material., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S financed support by MCIN/AEI/10.13039/501100011033 and PDI2021-126071-OB-C21 financed support by MCIN/AEI/10.13039/501100011033 and by FEDER "Una manera de hacer Europa") , King Abdullah University of Science and Technology (KAUST) and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Socie-dad Digital) are gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR) and Generalitat Valenciana (CIGE 2022-093) financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital. J.H. thanks the Chinese Scholarship Council for doctoral fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Active site imprinting on Ti oxocluster metal-organic frameworks for photocatalytic hydrogen release from formic acid

  • García-Baldoví, Alberto
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Del Angel, Raquel
  • Mouchaham, Georges
  • Liu, Shanping
  • Fan, Dong
  • Maurin, Guillaume
  • Serre, Christian
[EN] On-board hydrogen release from liquid organic carriers is a process that can make feasible the use of H-2 as a transportation fuel. Formic acid is considered as one of the most convenient liquid hydrogen organic carriers, and since it can be easily obtained from CO2, it is water soluble which makes it unnecessary to recover the H-2-depleted byproducts. Compared to the more conventional thermal catalytic decomposition of formic acid, the use of light in combination with a photocatalyst has been much less explored. Herein, we report a new paradigm in MOF photocatalysis with the use of a microporous titanium oxocluster based metal-organic framework (Ti-MOF) endowed with formate-imprinted active sites, namely MIP-177-LT (MIP stands for Materials from Institute of Porous Materials of Paris, LT for Low Temperature), as a highly efficient photocatalyst for H-2 release from formic acid without the need to neutralize acidity or use sacrificial agents or noble metals. Noteworthily, a quantum efficiency of 22% has been determined for the photocatalytic H-2 release that is highly remarkable for a non-toxic noble metal-free photocatalyst., Financial support from Spanish Ministerio de Ciencia e Innovacion (PID2021-126071OB-C21 and Severo Ochoa) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. R. D. A. is thankful to CONACYT for the PhD grant 2018-000003-01EXTF00075 (CVU: 697332). S. N. is gracious for the financial support from Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by ``ERDF A way of making Europe''. The computational work was performed using HPC resources from GENCI-CINES (Grant A0120907613).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Polyoxometalate-Stabilized Silver Nanoparticles and Hybrid Electrode Assembly Using Activated Carbon

  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Cots, Laia
  • Perxés Perich, Marta
  • Zhu, Jun-Jie
  • Gomez-Romero, Pedro
[EN] The intersection between the field of hybrid materials and that of electrochemistry is a quickly expanding area. Hybrid combinations usually consist of two constituents, but new routes toward more complex and versatile electroactive hybrid designs are quickly emerging. The objective of the present work is to explore novel triple hybrid material integrating polyoxometalates (POMs), silver nanoparticles (Ag-0 NPs), and activated carbon (AC) and to demonstrate its use as a hybrid electrode in a symmetric supercapacitor. The tri-component nanohybrid (AC/POM-Ag-0 NPs) was fabricated through the combination of AC with pre-synthesized & SIM;27 nm POM-protected Ag-0 NPs (POM-Ag-0 NPs). The POM-Ag-0 NPs were prepared using a green electrochemical method and characterized via UV-vis and IR spectroscopy, electron microscopy, dynamic light scattering (DLS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV). Afterward, the AC/POM-Ag-0 NPs ternary nanocomposite material was constructed and characterized. The electrochemical behavior of AC/POM-Ag-0 NPs' modified electrodes reveal that the nanomaterial is electroactive and exhibits a moderately higher specific capacitance (81 F/g after 20 cycles) than bare AC electrodes (75 F/g) in a symmetrical supercapacitor configuration in the voltage range 0 to 0.75 V and 20 mV/s, demonstrating the potential use of this type of tri-component nanohybrid for electrochemical applications., This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant agreement No 894270. This research was funded by the postdoctoral fellowship program Beatriu de Pinos, funded by the Commission for Universities and Research of the Department of Innovation, Universities, and Enterprise of the Generalitat de Catalunya and by the Horizon 2020 program of research and innovation of the European Union under the Marie Sklodowska-Curie grant agreement No 801370.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Molten Salt Derived MXenes: Synthesis and Applications

  • Kruger, Dawid Daniël
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
[EN] About one decade after the first report on MXenes, these 2D early transition metal carbides or nitrides have become among the best-performing materials in electrode applications related to electrical energy storage devices and power-to-fuels conversion. MXenes are obtained by a top-down approach starting from the appropriate 3D MAX phase that undergoes etching of the A-site metal. Initial etching procedures are based on the use of concentrated HF or the in situ generation of this highly corrosive and poisonous reagent. Etching of the MAX phase is one of the major hurdles limiting the progress of the field. The present review summarizes an alternative, universal, and easily scalable etching procedure based on treating the MAX precursor with a Lewis acid molten salt. The review starts with presenting the current state of the art of the molten salt etching procedure to obtain or modify MXene, followed by a summary of the applications of these MXene samples. The aim of the review is to show the versatility and advantages of molten salt etching in terms of general applicability, control of the surface terminal groups, and uniform deposition of metal nanoparticles, among other features of the procedure., This work was financially support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

All-carbon microporous graphitic photocatalyst-promoted reduction of CO2 to CO in the absence of metals or dopant elements

  • Garcia-Mulero, Ana
  • Asiri, Abdullah M
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Microporous graphitic carbon (mp-C) derived from the pyrolysis of alpha-, beta-, and gamma-cyclodextrins exhibited photocatalytic activity in CO2-saturated acetonitrile-water upon irradiation with UV-Vis light and in the presence of triethanolamine, forming H-2 (19 mu mol h(-1)) and CO (23 mu mol h(-1)) accompanied by a lesser proportion of CH4 (4 mu mol h(-1)). The most efficient was the mp-C material derived from alpha-cyclodextrin (mp-C-alpha) and having a pore dimension of 0.68 nm. The process also occured, although to a much lesser extent, under simulated sunlight or with UV-Vis irradiation in the absence of a sacrificial agent, with H2O being the electron donor. The origin of the CO was proved by isotopic C-13 labelling experiments. Photocurrent measurements proved the occurrence of charge separation and the increase in photocurrent intensity in the presence of CO2. Transient absorption spectroscopy was used to detect the charge separate state decay in the microsecond time scale and proved that a fraction of the photogenerated electrons were able to react with CO2., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa, PID-2021-12607OB-C21 and RTI2018-89237-CO2-1) and Generalitat Valenciana (Prometeo 2021/083) are gratefully acknowledged. A. G.-M. thanks the Spanish Ministry of Science and Innovation for a postgraduate scholarship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mixed Fe-Mo carbide prepared by a sonochemical synthesis as highly efficient nitrate reduction electrocatalyst

  • Hu, Jiajun
  • Osella, Silvio
  • Arizono dos Reis, Eduardo
  • Brunca da Silva, Anelisse
  • Ribeiro, Caue
  • Helena Mascaro, Lucia
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Ammonia, a versatile compound that can be used as a fertilizer, chemical or fuel, has since long been produced through the energy-intensive Haber-Bosch process. Recently, the electrochemical nitrate reduction reaction (NO3RR) using electricity generated from renewable sources has attracted widespread attention. However, the complex reaction pathway of NO3RR leads to the formation of many undesirable by-products. Herein we successfully prepared a mixed (FeMo)2C catalyst with good electrocatalytic NO3RR, having a NH3 yield of 14.66¿mg¿h-1 cm-2 and an FE of 94.35% at low potential -0.3¿V vs RHE. DFT calculations show that the presence of Fe in Mo2C lattice changes the reaction mechanism, decreasing the potential barrier to be overcome from 1.36 to 0.89¿eV. In addition, mixed Fe-Mo carbide facilitates the adsorption of intermediates and promotes NH3 desorption, facilitating NO3¿ reduction to NH3. In addition, (FeMo)2C was used as cathode for Zn-NO3 battery to generate electricity, producing ammonia at the same time, with a power density of 3.8 mWcm-2 and an NH3 FE of 88%. This work describes a new synthesis method for mixed metal carbides and provides a promising strategy for NH3 production., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). J.H. thanks the Chinese Scholarship Council for a postgraduate scholarship to perform his PhD at Valencia. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021 031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/PRTR), and Generalitat Valenciana financial support (CIGE 2022-093) financed by European Union-Next Generation EU, through the Conselleria de Innovacion, ¿ Universidades, Ciencia y Sociedad Digital. S.O. thanks the National Science Centre, Poland (grant no. UMO/2020/39/I/ST4/01446) and the Excellence Initiative Research University (IDUB) Program, Action I.3.3 Establishment of the Institute for Advanced Studies (IAS) for funding (grant no. UW/IDUB/2020/25). The computation was carried out with the support of the Interdisciplinary Center for Mathematical and Computational Modeling at the University of Warsaw (ICM UW) under grants no. G83-28 and GB80-24.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photocatalytic activity of a 2D copper porphyrin metal-organic framework for visible light overall water splitting

  • Uscategui-Linares, Andrés Felipe|||0000-0003-2448-9966
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Szalad, Horatiu
[EN] A 2D copper tetrakis(4-carboxyphenyl)porphyrin metal-organic framework has been prepared and used as a photocatalyst for overall water splitting, measuring under visible light irradiation (lambda > 450 nm) under one sun power conditions a H2 production rate of 120 mu molH2 gcatalyst-1 h-1 that is among the highest ever reported. While the 2D Cu porphyrin MOF undergoes substantial degradation in 3 h upon UV irradiation (320-380 nm) in the presence of air, it appears to be photostable under the conditions of the overall water splitting and visible light exposure, exhibiting similar temporal profiles for H2 and O2 evolution. Photocurrent experiments and band energy measurements indicate that the photocatalytic efficiency derives from an efficient charge separation in the visible region (apparent electron charge extraction efficiency at 540 nm of 0.1%) and adequate alignment of the redox potential of the conduction (-0.59 V vs. NHE) and valence (+1.48 V vs. NHE) bands for water splitting., Financial support from the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1), and the European Commission (MOF2H2; Grant Agreement 101084131) is gratefully acknowledged. J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR) and the financial support (PID2022-141099OA-I00 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Defect-Engineered Metal-Organic Framework/Polyimide Mixed Matrix Membrane for CO2 Separation

  • Mashhadikhan, Samaneh
  • Amooghin, Abtin Ebadi
  • Masoomi, Mohammad Yaser
  • Sanaeepur, Hamidreza
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Defect-engineered metal-organic frameworks (MOFs) with outstanding structural and chemical features have become excellent candidates for specific separation applications. The introduction of structural defects in MOFs as an efficient approach to manipulate their functionality provides excellent opportunities for the preparation of MOF-based mixed matrix membranes (MMMs). However, the use of this strategy to adjust the properties and develop the separation performance of gas separation membranes is still in its early stages. Here, a novel defect-engineered MOF (quasi ZrFum or Q-ZrFum) was synthesized via a controlled thermal deligandation process and incorporated into a CO2-philic 6FDA-durene polyimide (PI) matrix to form Q-ZrFum loaded MMMs. Defect-engineered MOFs and fabricated MMMs were investigated regarding their characteristic properties and separation performance. The incorporation of defects into the MOF structure increases the pore size and provides unsaturated active metal sites that positively affect CO2 molecule transport. The interfacial compatibility between the Q-ZrFum particles and the PI matrix increases via the deligandation process, which improves the mechanical strength of Q-ZrFum loaded membranes. MMM containing 5 wt.% of defect-engineered Q-ZrFum exhibits excellent CO2 permeability of 1308 Barrer, which increased by 99 % compared to the pure PI membrane (656 Barrer) at a feed pressure of 2 bar. CO2/CH4 and CO2/N-2 selectivity reached 44 and 26.6 which increased by about 70 and 16 %, respectively. This study emphasizes that defect-engineered MOFs can be promising candidates for use as fillers in the preparation of MMMs for the future development of membrane-based gas separation applications., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union Next Generation EU PRTR-C17.I1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of the surface terminal groups on the efficiency of two-electron oxygen reduction reaction by iron single atoms on Ti3C2Tx (Tx=Cl, Br, NH) MXene

  • Kruger, Dawid Daniël
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Delgado, Juan Jose
  • Recio, F. Javier
[EN] Two Ti3C2 MXenes having single atom Fe were prepared from a Ti3AlC2 precursor by Al etching using an FeX2 (X = Cl, Br) Lewis acid as an etching reagent in NaCl/KCl molten salt. After removal of the excess Fe metal using concentrated aqueous HX solution, the resulting MXenes having Cl or Br surface terminations were concomitantly doped with single Fe atoms. A third sample was prepared from Fe(SA)-Ti3C2Brx by exchanging Br with -NH- using LiNH2 in molten salt. The presence of single atom Fe was determined by aberration corrected high-angle annular dark-field scanning transmission electron microscopy (AC-HAADF-STEM) with atomic resolution where isolated Fe atoms were observed. These Fe(SA)-Ti3C2Tx materials exhibit electrocatalytic activity for the oxygen reduction reaction (ORR), with the selectivity to H2O2 depending on the surface termination and the electrolyte pH. Involvement of Fe SA was inferred from the onset potential of the ORR and the Fe(III)/Fe(II) reduction potential and the change of the Tafel slope in this region. Under the best conditions, at pH 13, Fe(SA)-Ti3C2(NH)(x) exhibits for the ORR an average electron transfer number (n) of 2.5, which corresponds to an H2O2 generation efficiency of 75%; these data compare well with those of the best Fe single-atom electrocatalysts., Financial support was provided by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-126071OB-C21\ and PID2021-123431OB-I00 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). The European Commission (ERC Adv., Grant Discovery) is also acknowledged. We thank the Advanced Microscopy Center of the University of Cadiz for granting instrument time.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Co-doped hydroxyapatite as photothermal catalyst for selective CO2 hydrogenation

  • Peng, Yong
  • Szalad, Horatiu
  • Nikacevic, Pavle
  • Gorni, Giulio
  • Simonelli, Laura
  • López, Núria
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The rational design and in deep understanding of efficient, affordable and stable materials to promote the light-assisted production of fuels and commodity chemicals is very appealing for energy crisis and climate change amelioration. Herein, we have prepared a series of Co-doped hydroxyapatite (HAP) catalysts with different Co content. The materials structure has been widely investigated by XRD, FT-IR, HRTEM, XPS, XAS, as well as computational simulations based on Density Functional Theory (DFT) with PBE functional. At low Co loading, there is a partial substitution of Ca cations in the HAP structure, while higher loadings promote the precipitation of small (similar to 2 nm) Co nanoparticles on the HAP surface. For the optimal Co content, a constant CO rate of 62 mmol center dot g(-1)center dot h(-1) at 1 sun illumination and 400 degrees C, with the material being stable for 90 h. Visible and NIR photons have been determined responsible of the light-assisted activity enhanced. Mechanistic studies based on both experimental and DFT simulations show that H-2 preferentially adsorbs to metallic Co, while CO2 adsorbs to the HAP surface oxygen. Moreover, both direct photo- and plasmon-driven contributions have been separated in order to study their mechanisms independently., Financial support by European Comission (FlowPhotoChem Grant Agreement 862453 and Solar2Chem grant agreement 861151), The Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S financed by MCIN/AEI/10.13039/501100011033, PDI2021-126071-OB-C21 financed by MCIN/AEI/10.13039/501100011033 and by FEDER "Una manera de hacer Europa", and PLEC2021-7831 financed by MCIN/AEI/10.13039/501100011033 and by European Union Next-Generation EU/PRTR), and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital) are gratefully acknowledged. J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I) financed by MCIN/AEI/10.13039/501100011033 and by European Union/Next Generation EU/PRTR). P. N. and N. L. thank the Spanish Ministry of Science and Innovation for financial support PID2021-122515OB-I00, and Severo Ochoa Grant MCIN/AEI/10.13039/501100011033 CEX2019-000925-S) and Barcelona Supercomputing Center-MareNostrum (BSC-RES) for providing generaous computational resources.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

MXene dots as photocatatlysts for CO&lt, sub&gt, 2 &lt, /sub&gt, hydrogenation

  • Ramírez-Grau, Rubén
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Cabrero-Antonino, Maria
[EN] Four MXene dots (MDs) (Ti3C2, Ti2C, V2C and Nb2C) have been prepared by laser ablation of the corresponding MAX phases in aqueous medium and subsequent separation by double centrifugation. These MDs were characterized by atomic force and transmission electron microscopy that show, respectively, thickness between 3 and 7.5 nm corresponding to few-layer nanoparticles and homogeneous lateral dimensions between 2.5 and 5 nm with high crystallinity. IR spectroscopy indicates that Ti3C2 and Ti2C contain OH as surface terminal groups, while XPS indicates the presence of O on the surface for the four samples. MDs present the most intense absorption band in the UV region with onset below 400 nm. These samples exhibit photocatalytic activity for CO2 hydrogenation to CO and methane, following the order Ti3C2>Nb2C>Ti2C>V2C. Isotopic label experiments confirm CO2 as the origin of the photo products. Most of the photoresponse derives from the UV photons, the photocatalytic activity increasing with the temperature in the range from 200 to 300 degrees C. These results show the possibility of tuning the composition, surface terminal groups, and other structural parameters of MXenes to produce semiconducting materials exhibiting important photocatalytic activity. Considering their versatility, flexible composition, and tunability, MXenes appear as promising 2D materials with intrinsic photoresponse to develop highly efficient photocatalysts., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials program Graphica MFA/ 2022/023 with funding from European Union Next Generation EU PRTR-C17. I1).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Positive influence of minute Pt addition on the activity of Ni supported on defective graphene for hydrogenation/dehydrogenation of N-ethylcarbazole as liquid organic carrier

  • García-Baldoví, Alberto
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Peng, Lu
  • Dhakshinamoorthy, Amarajothi
  • Asiri, Abdullah M.
[EN] Ni nanoparticles (approximate to 8 nm) have been prepared at about 15 wt% loading strongly grafted on N-doped graphitic carbon matrix [Ni@(N)C] by pyrolysis of Ni(OAc)2 adsorbed on chitosan. Ni@(N)C was used as catalyst for H2 storage/release on N-ethylcarbazole (EC). Ni@(N)C exhibits higher H2 storage capacity than analogous Ni nanoparticles (NPs) supported on silica. The addition of minute amounts (18 ppm) of Pt increases significantly the H2 storage/release activity of Ni@(N)C due to effect of Pt promoting H spill over the Ni NPs. There is no linear correlation between Pt concentration and hydrogenation/dehydrogenation activity of Ni@(N)C, the lowest Pt loading (18 ppm) resulting in the most efficient Pt/Ni@(N)C for hydrogenation-dehydrogenation of EC. This fact was attributed to the presence of small Pt clusters or single atoms, while higher concentration would correspond to a less-efficient larger cluster regime. The most efficient Pt/Ni@(N)C-18 catalyst was used for four consecutive hydrogenation/dehydrogenation cycles, exhibiting some fatigue in the H2 storage/release of the same EC batch that was attributed to the increase in the product mixture complexity upon cycling, with the formation of some intermediates that undergo more difficult hydrogenation/dehydrogenation reaction as well as partial catalyst deactivation. After four cycles, (Pt)Ni@(N)C exhibits in the fifth use a H2 storage capacity of 5.2 wt%, somewhat lower than the 5.8 wt% H2 capacity of the fresh sample, while no changes in the XRD, TEM and XPS characterization of the five-times used catalyst compared to the fresh material is observed., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa Center of Excellence CEX2021-001230-S and PDI2021- 12607108-C21, both funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021-38 and MFA/2022/023) is gratefully acknowledged. A.D. thanks the Spanish Ministry of Science and Education for a Maria Zambrano contract. L.P. was the recipient of a Grisolia fellowship.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective Gas-Phase Hydrogenation of CO2 to Methanol Catalysed by Metal-Organic Frameworks

  • Dhakshinamoorthy, Amarajothi
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Large scale production of green CH3OH obtained from CO2 and green H-2 is a highly wanted process due to the role of CH3OH as H-2/energy carrier and for producing chemicals. Starting with a short summary of the advantages of metal-organic frameworks (MOFs) as catalysts in liquid-phase reactions, the present article highlights the opportunities that MOFs may offer also for some gas-phase reactions, particularly for the selective CO2 hydrogenation to CH3OH. It is commented that there is a temperature compatibility window that combines the thermal stability of some MOFs with the temperature required in the CO2 hydrogenation to CH3OH that frequently ranges from 250 to 300 degrees C. The existing literature in this area is briefly organized according to the role of MOF as providing the active sites or as support of active metal nanoparticles (NPs). Emphasis is made to show how the flexibility in design and synthesis of MOFs can be used to enhance the catalytic activity by adjusting the composition of the nodes and the structure of the linkers. The influence of structural defects and material crystallinity, as well as the role that should play theoretical calculations in models have also been highlighted., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). AD is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). S.N. thanks the support of Grant PID2021-123856OBI00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. The METHASOL project receives funding from the European Union Horizon 2020 research and innovation programme under Grant Agreement No 101022649.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Porous Metal Organic Frameworks as Multifunctional Catalysts for Cyclohexane Oxidation

  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • López-Francés, Antón|||0000-0002-1639-592X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Catalysis drives the conversion of substrates to the wanted products under amenable reaction conditions. In this context, one reaction that is particularly important from the industrial point of view is cyclohexane aerobic oxidation to a mixture of the corresponding cyclohexanone and cyclohexanol. This industrial oxidation is key for the production of Nylon 6 and Nylon 6,6, two polyamides of growing production. The industrial process is clearly unsatisfactory since it is run at low cyclohexane conversions to avoid the formation of complex mixtures, difficult to isolate. The present review shows the progress made in the use of metal-organic frameworks as solid catalysts for this important reaction, with emphasis in the intrinsic activity of metal nodes, tuning of the polarity of the internal voids or incorporation of active metal nanoparticles. It is shown that using MOFs as catalysts, it is possible to reach high cyclohexane conversions, while the combined alcohol+ketone selectivity still close to the 90 % limit., AD thanks Universitat Politecnica de Valencia for Maria Zambrano support. AD also thanks University Grants Commission for the award of UGC-Assistant Professor. Financial support from the Spanish Ministry of Science and Innovation (Severo Ochoa and PID2021-126071OB-C21) and Generalitat Valenciana is gratefully acknowledged. SN thanks Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hydrogenation of amides to amines by heterogeneous catalysis: a review

  • Yang, Huiru
  • Hu, Changwei
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Amines are pivotal building blocks for a range of applications, including pharmaceuticals, polymers, agrochemicals, and organic synthesis. The hydrogenation of amides using molecular hydrogen via heterogeneous catalysis is considered a promising method for producing amines with considerably high atom efficiency, environmental friendliness, and eonomic viability. Continued developments have occurred in this area, with milestones reached in the hydrogenation of various amides to amines via heterogeneous catalysis. At present, no systematic analysis of the influence of amide structures on their reactivity and the required type of catalyst has been reported. This review describes the most recent advances in catalytic amide hydrogenation, paying special attention to the influence of structural features (cyclic amides and aliphatic acyclic amides) on catalyst performance. Structural features endow amides with specific reactivities, reflected in considerable differences in the ease of hydrogenation and diverse product selectivity. In addition, insights into the conversion of polyamides, fatty acids, and triglycerides to amines are provided. This review provides new perspectives for designing and applying heterogeneous catalysts adapted to specific conditions and amide structures. A comprehensive summary of heterogeneous catalysts for the hydrogention of various amides with differnent structural feactures to amines., This work was financially supported by the National Natural Science Foundation of China (No. 21536007) and the 111 Project (B17030). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGeneration EU PRTR-C17.I1) is gratefully acknowledged. Huiru Yang also acknowledges the support from the China Scholarship Council (CSC No. 202206240141).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ligand decorated nickel-based nanoparticles supported onto MXenes in catalytic hydrogenation of N-heterocycles

  • Medina-Vargas, Judith
  • Martin, Santiago
  • Sorribes-Terrés, Iván
  • Mata, Jose A.
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] The development of efficient first-row transition metal catalysts is essential for advancing sustainable chemical processes. In this study, we report the synthesis of nickel-based nanoparticles (NiNPs) functionalized with N-heterocyclic carbene ligands and immobilized onto Ti3C2 MXene. Our convergent synthetic approach enables comprehensive and straightforward characterization of each component within the final hybrid material. The NiNPs are obtained through chemical reduction of a well-defined nickel organometallic complex, resulting in the formation of small nickel metal nanoparticles (3.0 +/- 0.8 nm) that are rapidly oxidized to the corresponding NiO and Ni(OH)2 based nanoparticles containing surface NHC ligands. The hybrid catalyst exhibits high activity and selectivity in the hydrogenation of N-heterocycles under hydrogenation conditions, achieving quantitative yields at low catalyst loadings, particularly notable for a nickel-based system. Recycling studies revealed progressive catalyst deactivation, primarily due to sintering of NiNPs, which reduces the number of active surface sites. However, the catalytic activity can be fully restored through a mild regeneration treatment under reducing conditions. These findings underscore the potential of NiNP/MXene-based materials for selective hydrogenation reactions, and highlight the importance of addressing key challenges in sustainability such as the use of non-noble metals, catalyst stability and recyclability. Further design modifications aimed at preventing nanoparticle sintering may enhance the long-term viability of these systems in catalytic hydrogenation processes., Thanks to the Spanish Ministry of Science and Innovation for financial support through the projects PID2021-126071OB-C21, PID2021-126071OB-C22 and CEX2023-001286-S, funded by MICIN/AEI/10.13039/501100011033/FEDER "Una manera de hacer Europa". Generalitat Valenciana (MFA/2022/043) with funding from European Union NextGenerationEU and Universitat Jaume I (UJI-B2022-23 and GACUJIMB/2023/13) is also gratefully acknowledged. I. S. thanks the Grant CNS2022-136183 funded by MICIU/AEI/10.13039/501100011033 and by "European Union NextGenerationEU/PRTR", and the Grant PID2022-143164OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by "ERDF/EU". I.S. also gratefully acknowledges the program ESGENT from Generalitat valenciana (CIESGT/2024/16). J. M.-V. thanks the program "Santiago Grisolia" (GrisoliaP2021/114). The authors thank 'Servei Central d'Instrumentacio Cientifica (SCIC) de la Universitat Jaume I '. S. M. is grateful to Gobierno de Aragon for the grant E31_23R with European Social Funds (Construyendo Europa desde Aragon).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhanced Fatty Acid Photodecarboxylation over Bimetallic Au-Pd Core-Shell Nanoparticles Deposited on TiO2

  • Yang, Huiru
  • Hu, Jiajun
  • Hu, Changwei
  • Tian, Liang|||0000-0002-3801-653X
  • Grirrane, Abdessamad|||0000-0001-5388-3554
  • García-Baldoví, Alberto
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Photodecarboxylation of biomass-derived fatty acids to alkanes offers significant potential to obtain hydrocarbons and economic benefits due to the mild conditions and high activity. Herein, the photodecarboxylation of hexanoic acid into alkanes using TiO2-supported monometallic Au or Pd and bimetallic Au-Pd catalysts is reported. It was found that bimetallic Au-Pd catalysts, featuring a core-shell structure evidenced by EDX-mapping and element line profile, show better photocatalytic performance, achieving 94.7% conversion of hexanoic acid and nearly 100% selectivity to pentane under UV-vis irradiation in the absence of H2 than the monometallic Au analogue. This remarkable enhancement in activity compared to its TiO2 supported monometallic Au or Pd analogues can be attributed to the synergistic effect between Au and Pd within the nanostructured Au(core)-Pd(shell) alloy for achieving more efficient charge-separation efficiency upon visible light excitation. This photocatalyst exhibits a wide scope converting multiple fatty acids into hydrocarbons. Moreover, it can even photocatalyze the conversion of raw bio-oils into alkanes directly. No obvious activity loss was observed during the reusability tests, demonstrating the good stability of the present catalyst. Density functional theory (DFT) calculations indicate that oxidation of carboxylates on TiO2 leads to alkyl radicals that become bound to metal nanoparticles. The superior catalytic performance of Au(core)-Pd(shell)/TiO2 is derived from the weaker adsorption for H on the alloy and the lower hydrogen evolution reaction overpotential. Our research can result in an efficient bio-oil upgrading, resulting in the synthesis of biofuels from biomass under mild conditions., This work was financially supported by the National Natural Science Foundation of China (No. 21536007) and the 111 Project (B17030). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) is gratefully acknowledged. Huiru Yang also acknowledges the support from China Scholarship Council (CSC).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Synergistic effect on the photocatalytic CO2 hydrogenation to methanol using dual atom Co-Cu poly(heptazine imide) and influence of pressure on the product selectivity.

  • García-Baldoví, Alberto
  • Cabrero-Antonino, Maria
  • Tian, Liang|||0000-0002-3801-653X
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
  • Peng, Lu
  • Antonietti, Markus
[EN] Single metal atom-doped materials are gaining importance in photocatalysis since they offer potential maximum atom economy in a system. Herein, the preparation of poly- (heptazine imide) (PHI) carbon nitride materials having Cu2+ or Co2+ single atom sites or dual Cu2+ and Co2+ sites is reported. The materials have been characterized by chemical analysis, X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS), while the single-atom nature of the metal dopants is supported by high-resolution high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) and X-ray absorption spectroscopy (XAS). The latter also shows a pronounced Cu2+¿ Co2+ coordination. The resulting three metal-PHI samples were then explored as photocatalysts for the photocatalytic activation of CO2 reduction at various pressures from ambient to 35 bar. A drastic change in the products from CO and CH4 under ambient pressure to formic acid and methanol at high pressure was observed, with formic acid being the predominant product at intermediate pressures. The products derived from CO2 were firmly confirmed by 13C isotopic labeling monitored by gas chromatography-mass spectrometry (GC-MS) (gas products) or 1 H NMR spectroscopy (liquid products). A synergy between Cu2+ and Co2+ was observed in the photocatalytic experiments, the activity following the order Co¿Cu/PHI > Cu/PHI > Co/PHI and interpreted as derived from the complementary action of each cation, Cu promoting H2 activation better than Co and Co promoting hydrogenation of adsorbed CO at lower energy than Cu. These findings show the potential of synergistic effects among different single atoms on a semiconducting support to enhance photocatalytic activity. In addition, the data through light on the importance of pressure to control the product distribution in the photocatalytic CO2 hydrogenation toward the more valuable liquid products., Financial support from the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OBCO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials Programme Graphica MFA/2022/023 with funding from the European Union NextGenerationEU PRTR-C17.I1). Financial support from the EU through the Methasol project is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

3D Structured Graphenes as (Photo)Catalysts

  • García Mulero, Ana
[ES] En la actualidad, el elevado consume energético y el aumento de la concentración de CO2 en la atmósfera han hecho necesaria la búsqueda de nuevas opciones para los procesos actuales. Una respuesta ha sido el aprovechamiento de la radiación solar para producir H2 a partir de la ruptura fotocatalítica del agua o la reducción del CO2 emulando a la naturaleza. Para ello, se propone el uso de materiales basados en carbono, de mayor abundancia y accesibilidad que los metales y óxidos metálicos. Además, un punto a tener en cuenta es la morfología, ya que haciendo uso del denominado "efecto de confinamiento" de los materiales 3D mejora notablemente la capacidad catalítica de los mismos. Es por esto por lo que, en la presente Tesis Doctoral, se ha desarrollado la posibilidad de obtener materiales grafénicos con estructuración tridimensional, presentado microporos en los que tiene lugar dicho efecto de confinamiento. De este modo, estos materiales son capaces de promover tanto la reacción de oxidación de la benzilamina como la reacción fotocatalítica de obtención de H2 a partir de agua y la de reducción de CO2. Concretamente, los materiales se han obtenido, por un lado, mediante el uso de agentes plantilla y la capacidad de recubrimiento de polisacáridos naturales como es el quitosano; y por otro, sin agentes plantilla, aprovechando la estructura de las ciclodextrinas como precursores del grafeno microporoso. Además, estos últimos materiales se han dopado con heteroátomos, en concreto fósforo, para mejorar la actividad fotocatalítica de estos materiales microporosos basados en carbono., [CA] En l'actualitat, l'elevat consum energètic i l'augment de la concentració de CO2 en l'atmosfera han fet necessària la cerca de noves opcions per als processos actuals. Una resposta ha sigut l'aprofitament de la radiació solar per a produir H2 a partir de la ruptura fotocatalítica de l'aigua o la reducció del CO2 emulant a la naturalesa. Per a això, es proposa l'ús de materials basats en carboni, de major abundància i accessibilitat que els metalls i òxids metàl·lics. A més, un punt a tindre en compte és la morfologia, ja que fent ús del denominat "efecte de confinament" dels materials 3D millora notablement la capacitat catalítica d'aquests. És per això que, en la present Tesi Doctoral, s'ha desenvolupat la possibilitat d'obtindre materials grafénics amb estructuració tridimensional, presentat microporus en els quals té lloc aquest efecte de confinament. D'aquesta manera, aquests materials són capaços de promoure tant la reacció d'oxidació de la benzilamina com la reacció fotocatalítica d'obtenció d'H2 a partir d'aigua i la de reducció de CO2. Concretament, els materials s'han obtingut, d'una banda, mitjançant l'ús d'agents plantilla i la capacitat de recobriment de polisacàrids naturals com és el quitosan; i per un altre, sense agents plantilla, aprofitant l'estructura de les ciclodextrines com a precursors del grafé microporós. A més, aquests últims materials s'han dopat amb heteroàtoms, en concret fòsfor, per a millorar l'activitat fotocatalítica d'aquests materials microporosos basats en carboni., [EN] Nowadays, the high energy consumption and the increase of the concentration of CO2 in the atmosphere have made it necessary to search for new options for the current processes. One possible answer has been the use of solar radiation to produce H2 from the overall photocatalytic water splitting or the photoreduction of CO2, by emulating nature. In this context, carbon-based materials, which are more abundant and accessible than metals and metal oxides, are proposed as catalysts. In addition, a point to take into account is the morphology, since making use of the so-called "confinement effect" of 3D materials significantly improves their catalytic capacity. This is the reason why, in this Doctoral Thesis, the possibility of obtaining graphene materials with three-dimensional structuring has been developed, presenting micropores in which this confinement effect takes place. In this way, these materials have been able to promote both the oxidation reaction of benzylamine and the photocatalytic reaction of obtaining H2 from water and the reduction of CO2. Specifically, the materials have been obtained, on the one hand, by using template agents and the coating capacity of natural polysaccharides such as chitosan; and on the other hand, without template agents, taking advantage of the structure of cyclodextrins as precursors of microporous graphene. In addition, the latter materials have been doped with heteroatoms, specifically phosphorus, to improve the photocatalytic activity of these carbon-based microporous materials., El autor agradece el proyecto PID2021-126071OB-C21 financiado por MICINN/AEI /10.13039/501100011033/ a FEDER Una manera de hacer Europa, por la financiación recibida, y al Ministerio por la FPU que me ha permitido desarrollar estos 4 años de trabajo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Epitaxial Fe Coating on Single- and Few-Layer Mo2C MXene as Highly Efficient Catalyst for Ambient Electrochemical Ammonia Synthesis

  • Midre, Sabine Eliane
  • Tian, Liang|||0000-0002-3801-653X
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Goberna-Ferrón, Sara|||0000-0002-3306-3791
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
[EN] Iron-intercalated Mo2C MXene (Fe/Mo2C) is presented as a robust, earth-abundant electrocatalyst for ambient ammonia synthesis. An in situ HF protocol converts Mo2Ga2C MAX into few-layer Mo2C terminated with =O/-F groups; subsequent wet impregnation followed by mild reduction deposits 7 wt % Fe(0) as an epitaxial coating that lines the internal van der Waals galleries and simultaneously blankets the external basal planes of the Mo2C MXene. Aberration-corrected STEM, FFT/inverse-FFT analysis, and STEM-EDX depth profiling verify lamellar Fe domains that connect neighboring Mo2C sheets while preserving crystallinity. This hybrid architecture halves the charge-transfer resistance (EIS) and provides a high density of Fe sites that preferentially adsorb N-2 over protons. In neutral 0.1 M Na2SO4, the optimized material achieves a Faradaic efficiency of 28.8% and an NH3 yield of 19.1 mu mol h(-1) mg(Fe)(-1) at 0.25 V vs RHE, matching or surpassing noble-metal benchmarks under ambient conditions. Operando ATR-SEIRAS detects N-N and -NHx vibrations consistent with an associative pathway, and N-15(2) labeling confirms the nitrogen source. The catalyst maintains stable performance for 10 h with no detectable Fe leaching. Thus, the combination of the activity of Fe overlayers with the conductive, mechanically resilient Mo2C framework renders a material with remarkable electrocatalytic activity for green-ammonia production., Financial support was provided by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-126071OB-C21\, and PID2021-123431OB-I00 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). The European Commission (ERC Adv., Grant Discovery) is also acknowledged. We thank Dr. Abdessamad Grirrane for his help and support with isotopic labeling experiments.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Ti3C2 MXene as heterogeneous catalyst for carbodiimides guanylation with over 102 h-1 turnover frequencies

  • Anouar, Aicha
  • Romero-Salicio, Elena
  • García-Aznar, Pablo|||0000-0003-0586-0037
  • Grirrane, Abdessamad|||0000-0001-5388-3554
  • Forneli Rubio, Mª Amparo
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Primo Arnau, Ana Maria|||0000-0001-9205-2278
[EN] A series of Ti3C2 samples has been prepared from Ti3AlC2 by NH4F-HCl etching, followed by subsequent posttreatments, such as DMSO expansion, ultrasound exfoliation, thermal annealing at 500 degrees C, surface modification by ammonium persulfate, tetrabutylammonium hydroxide and hydrochloric acid. These Ti3C2 samples have been tested as heterogeneous catalysts for guanylation of symmetrical carbodiimides by aromatic and secondary aliphatic amines, observing the formation of the corresponding guanidines, accompanied by dialkylureas. The initial reaction rates between N,N'-diisopropylcarbodiimide and p-toluidine correlate linearly with the density of weak strength acid sites of the Ti3C2 sample measured by NH3 thermo-programed desorption. This has led us to propose these weak acid sites as active centers of the reaction. Based on the population of weak acid sites, the estimated turnover numbers and frequencies were calculated to be 101 and 114 h- 1 for the most active Ti3C2 sample. These values rank Ti3C2 among the most active noble metal-free solid guanylation catalysts reported so far. Upon reuse, the Ti3C2 sample undergoes gradual deactivation, characterization of the four-times used Ti3C2 sample indicates that the crystallinity is preserved. Catalyst deactivation derives from deposition of the reaction products on the surface and/or from the increase of the oxygenated surface functional groups upon reuse. Deactivation can be partially reversed by thermal product desorption. DFT calculations indicate that the rate determining step in the reaction mechanism is the cycloaddition between the carbodiimide and the deprotonated toluidine anchored to the Ti3C2 surface. The present results illustrate the potential that MXenes have as solid catalysts for organic reactions, particularly Ti MXenes to promote reactions requiring amine activation, such as the present guanylation reaction., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) , Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) and European Commission through the ERC Adv. Grant 101141466 DISCOVERY is gratefully acknowledged. Pablo Garcia-Aznarand German Sastre f would like to thank ASIC-UPV and SGAI-CSIC for the use of their computational facilities. We also thank MICIN for the Severo Ochoa Excellence Research Grant.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanistic Insights in Acceptorless Dehydrogenation of N-Heterocycles Using Graphenes as Carbocatalysts

  • Mollar-Cuni, Andres
  • Martín, S
  • Mata, Jose A.
  • García-Aznar, Pablo|||0000-0003-0586-0037
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Catalytic dehydrogenation is a critical transformation in the chemical and energy sectors, particularly for reversible hydrogen storage systems. One of the most promising systems for hydrogen storage is the development of liquid organic hydrogen carriers (LOHCs), which have the potential capacity of storing and releasing hydrogen gas on demand. Catalytic direct dehydrogenation represents a greener, promising method to generate hydrogen in situ from these hydrogen-dense carriers. The catalytic activity of graphene materials as metal-free carbocatalysts in the acceptorless dehydrogenation of Nheterocycles has been explored. Herein, a detailed mechanistic investigation has been conducted through both experimental (stoichiometric and masking experiments) and DFT calculations on the reaction mechanism. The proposed mechanism identifies o-quinone groups as the active sites responsible for catalysis, involving the transformation of o-quinone groups into epoxide intermediates, which release molecular hydrogen and regenerate the o-quinone groups, completing the catalytic cycle. This work provides insight into the design of efficient metal-free catalysts for their use in LOHCs storage systems, paving the way for sustainable energy solutions, MICIU/AEI/FEDER (PID2021-126071OB-C22, PID2021-126071OB-C21 and PID2022-141433OB-I00), Universitat Jaume I (UJI-B2022-23), Generalitat Valenciana (MFA/2022/043, MFA/2022/023 and CIAPOS/2024/124). European Project SUPERVAL (Grant Agreement No. 101115456).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Metal Nodes of Metal-Organic Frameworks can Activate Molecular Hydrogen

  • Melillo, Arianna
  • Alvaro Rodríguez, Maria Mercedes|||0000-0001-5070-4207
  • Ferrer Ribera, Rosa Belén
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Franconetti, Antonio
[EN] Hydrogenation of multiple bonds are among the most general and important organic reactions. Typical heterogeneous catalysts are based on transition metal nanoparticles, including noble metals. Data are presented here showing that metal nodes of MIL-101(Cr) and UiO-66 in the absence of occluded metal nanoparticles can promote hydrogenation of polarized X=Y double bonds of nitro and carbonyl groups. The catalytic activity is a function of the composition of the metal node and the organic linker. It is proposed that the reaction mechanism is based on the operation of frustrated Lewis acid/base pairs., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and PDI2021-126071-OB-CO21) and Generalitat Valenciana (Prometeo 2021-083) are gratefully acknowledged. Authors also thank the Galicia Supercomputing Centre (CESGA) for computational facilities.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Selective oxidative coupling of amines through light-activated bismuth halide perovskites

  • Lopes, Joana C.
  • Sampaio, Maria J.
  • Silva, Claudia G.
  • Faria, Joaquim L.
  • Albero-Sancho, Josep|||0000-0002-4841-7206
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Bismuth halide perovskites have emerged as promising alternatives for sustainable and efficient photocatalysts for light-induced organic transformations. Caesium bismuth halide perovskites (Cs3Bi2(ClxBr1-x)9) with different ratios of chloride and bromide were synthesised using a one-step solution process. These perovskites were then employed as photocatalysts for the photocatalytic oxidative coupling of benzylamine (BZA) to produce N-benzylidenebenzylamine (BZI) under ultraviolet-visible light radiation at ambient conditions. The incorporation of bromide ions into the chloride-based perovskite resulted in a noticeable reduction in the bandgap, leading to an enhancement in the photocatalytic activity. Conversely, the addition of chloride ions within the bromide-based perovskite was found to be beneficial for the material's photostability while simultaneously maintaining its high photocatalytic activity. The optimal compromise between the stability and photocatalytic activity for the BZI production was achieved using Cs3Bi2(Cl0.8Br0.2)9, being attained a total BZA conversion and the maximum BZI production with 100 % of selectivity after 6 hours of irradiation. The efficiency of this photocatalyst was ascribed to the highest current density observed during the photocurrent experiments, which improves the charge carrier mobility of the resulting material., This work was supported by national funds through FCT/MCTES (PIDDAC): LSRE-LCM, UIDB/50020/2020 (DOI: 10.54499/UIDP/50020/2020) and UIDP/50020/2020 (DOI: 10.54499/UIDP/50020/2020); and ALiCE, LA/P/0045/2020 (DOI: 10.54499/LA/P/0045/2020). The authors also thank the project ClimActic (NORTE-01-0145-FEDER-000071), funded by European Regional Development Fund (ERDF) through COMPETE2020 - Programa Operacional Competitividade e Internacionalizacao (POCI) and by national funds (PIDDAC) through FCT/MCTES. H.G. and J. A. thank the financial support from the Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S financed by MCIN/AEI/10.13039/501100011033, PDI2021-126071-OB-C21 financed by MCIN/AEI/10.13039/501100011033 and by FEDER "Una manera de hacer Europa", and PLEC2021-7831 financed by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/ PRTRCEX2021-1230-S) and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital). J.A. also thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR)). JCL acknowledges the PhD research grant from FCT, Ref. 2020.04651.BD. . MJS acknowledges FCT funding under the Scientific Employment Stimulus - Institutional Call (CEECINST/00010/2021).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Challenges and opportunities for N-hydroxyphthalimide supported over heterogeneous solids for aerobic oxidations

  • Caruso, Manfredi
  • Cametti, Massimo
  • Punta, Carlo
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
  • Amarajothi, Dhakshina Moorthy|||0000-0003-0991-6608
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Organocatalysis, in combination with, or as an alternative to the use of metals, is attracting increasing interest as a sustainable route to promote selective transformations. In this context, N- hydroxyphthalimide (NHPI) has found ample application as an effective organocatalyst capable to pro-mote the aerobic oxidation of a wide range of organic substrates, including saturated and unsaturated hydrocarbons, alcohols, amines and sulphides among others. However, most of these transformations required the use of NHPI dissolved in solution, with consequent limits in the scale-up of the process. Leaving aside the reviews of NHPI as organocatalyst in homogeneous phase, the present review describes the strategies reported to support or anchor NHPI on a wide range of insoluble solids, thus converting this homogeneous organocatalyst into a heterogeneous system, with the consequent advantages related to the ease of separation and recovery of the catalyst from the reaction medium, its recyclability and the possibility to develop continuous flow reactions. After a brief introductory section, a detailed description of the catalytic mechanism is here presented, also providing a comparison between NHPI and 2,2,6,6-tet ramethylpiperidine-1-oxyl (TEMPO) radical, and by highlighting the main challenges associated to NHPI heterogenization. The critical description of the heterogeneous solutions is organized according to the nature of the support, focusing on metal-organic frameworks (MOFs), organic polymers, carbon-based materials, and inorganic supports, while the growing use of NHPI-containing photocatalysts is presented separately. In the final section, we outline the main achievements on the use of NHPI heterogeneous catalysis and provide our views for future developments in the area., S.N. is gracious for the financial support from Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe. A.D. is beneficiary of a grant Maria Zambrano in Universitat Politecnica de Valencia within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). H.G. is thankful for financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa Financial support by Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/5011000110 33) and the Generalitat Valenciana (Prometeo2021-038). H.G. is also gracious for the financial support from Grant PID2021-126071OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photoaccumulation of Long-Lived Reactive Electrons in a Microporous Ti(IV) Oxocluster-Based Metal-Organic Framework for Light and Dark Photocatalysis

  • Yao, Shilin
  • Heinzerling, Katrin
  • Hillman, Sam A. J.
  • Podjaski, Filip
  • He, Tianhao
  • Baghdadi, Yasmine
  • Dassouki, Khaled
  • Eslava, Salvador
  • Steunou, Nathalie
  • Gonzalez-Carrero, Soranyel
  • Mouchaham, Georges
  • Serre, Christian
  • García-Baldoví, Alberto
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
  • Navalón Oltra, Sergio|||0000-0001-8423-0759
[EN] The microporous Ti12 oxocluster-based metal-organic framework (MOF) MIP-177(Ti)-LT exhibits excellent stability and photoactivity, making it highly promising for photocatalysis. Using transient and photoinduced absorption spectroscopies, the behavior of reactive electrons in MIP-177(Ti)-LT across femtosecond-to-second timescales is investigated. The framework shows efficient charge separation and slow decay kinetics, with photogenerated charges persisting into the microsecond-second (mu s-s) range and displaying higher yields and slower recombination than benchmark MOFs MIL-125(Ti)-NH2 and UiO-66(Zr)-NH2. Photogenerated holes oxidize water with an O2 yield of 335 mu mol g-1 h-1 in the presence of electron scavengers. Under continuous irradiation, long-lived electrons accumulate, further enhanced by a hole scavenger (methanol). Remarkably, these electrons persist over 48 h post-excitation under argon, accompanied by a reversible white-to-black color change. The stored electrons remain redox-active, efficiently reducing added O2 and methyl viologen. Dark addition of a Pt co-catalyst to photocharged MIP-177(Ti)-LT induces H2 evolution at approximate to 300 mu mol g-1 (approximate to 58 C g-1), corresponding to an accumulated electron density of one electron per 12 Ti atoms. These results highlight the photocharging properties of MIP-177(Ti)-LT and its potential for sustainable photocatalytic applications., This project has received funding from the European Union's Horizon 2020 research and innovation programme under grant agreement no. 101022649 (Methasol). S.Y. acknowledges financial support from China Scholarship Council-Imperial Scholarship, and lab support from Dr. Xiaoe Li and Dr. Pabitra Shakya Tuladhar. S.N., H.G., G.M., and C.S. acknowledge the European Union under the Grant Agreement 101084131 (MOF2H2 project) for the financial support. F.P. and J.D. acknowledge funding from UKRI (grant reference EP/X027449/1) and EPSRC (grant reference EP/T028513/1). H.G. thanks financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PDI2021-0126071-OB-CO21) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). S.N. thanks the support received from Grant PID2021-123856OB-I00, both funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. S.G-C. acknowledge financial support from Generalitat de Valenciana (CIDEIG/2023/17).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphitic Carbon Nitride as Visible-Light Photocatalyst Boosting Ozonation in Wastewater Treatment

  • Dhakshinamoorthy, Amarajothi
  • López-Francés, Antón
  • Navalón, Sergio
  • García Gómez, Hermenegildo
Light can boost ozone efficiency in advanced oxidation processes (AOPs), either by direct ozone photolysis with UV light or by using a photocatalyst that can be excited with UV-Vis or solar light. The present review summarizes literature data on the combination of ozone and the g-CN photocatalyst for the degradation of probe molecules in water, including oxalic, p-hydroxybenzoic and oxamic acids as well as ciprofloxacin and parabens. g-CN is a metal-free visible-light photocatalyst based on abundant elements that establishes a synergistic effect with ozone, the efficiency of the combination of the photocatalysis and ozonation being higher than the sum of the two treatments independently. Available data indicate that this synergy derives from the higher efficiency in the generation of hydroxyl radicals due to the efficient electron quenching by O of photogenerated conduction band electrons in the g-CN photocatalyst. Given the wide use of ozonizers in water treatment, it is proposed that their implementation with g-CN photocatalysis could also boost ozone efficiency in the AOPs of real waste waters., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and PIDS2021-126071OB-C21) and Generalitat Valenciana (Prometeo 2021-038) is gratefully acknowledged. S.N. thanks financial support by Agència Valenciana de la Innovació (AVI, INNEST/2020/111) project and Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of Defects on the Particle Size–Capacitance Relationship of Zn–Co Mixed Metal Oxide Supported on Heteroatom-Doped Graphenes as Supercapacitors

  • Hu, Jiajun
  • Peng, Y.
  • Albero, J.
  • García Gómez, Hermenegildo
Supercapacitors are considered among the most promising electrical energy storage devices, there being a need to achieve the highest possible energy storage density. Herein small mixed Zn–Co metal oxide nanoparticles are grown on doped graphene (O-, N- and, B-doped graphenes). The electrochemical properties of the resulting mixed Zn–Co metal oxide nanoparticles (4 nm) grown on B-doped graphene exhibit an outstanding specific capacitance of 2568 F g at 2 A g, ranking this B-doped graphene composite among the best performing electrodes. The energy storage capacity is also remarkable even at large current densities (i.e., 640 F g at 40 A g). In contrast, larger nanoparticles are obtained using N- and O-doped graphenes as support, the resulting materials exhibiting lower performance. Besides energy storage, the Zn–Co oxide on B-doped graphene shows notable electrochemical performance and stability obtaining a maximum energy density of 77.6 W h Kg at 850 W Kg, a power density of 8500 W Kg at 28.3 W h Kg, and a capacitance retention higher than 85% after 5000 cycles. The smaller nanoparticle size and improved electrochemical performance on B-doped graphene-based devices are attributed to the higher defect density and nature of the dopant element on graphene., The authors gratefully acknowledge the financial support by the “MCIN/AEI/10.13039/501100011033/, the FEDER funds (PDI2021-126071-OB-C21)”, the Generalitat Valenciana (Prometeo 2021–038), and the European Union project H2020-LC-CS3-2020-RES-RIA “Eco2Fuel”(grant agreement 101006701). J.H. thanks the Chinese Scholarship Council for doctoral fellowship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phosphorus-Rich Ruthenium Phosphide Embedded on a 3D Porous Dual-Doped Graphitic Carbon for Hydrogen Evolution Reaction

  • Anouar, A.
  • Doménech-Carbó, Antonio
  • García Gómez, Hermenegildo
Metal phosphides have recently emerged as promising electrocatalysts for hydrogen evolution reaction (HER). Herein, we report the synthesis of ruthenium diphosphide embedded on a dual-doped graphitic carbon by pyrolyzing chitosan beads impregnated with ruthenium chloride and phosphorus pentoxide. The as-synthesized RuP@N-P-C displays a good electrocatalytic activity in acidic, neutral and alkaline media. We show that the HER activity of the electrocatalyst can be tuned by varying the concentration of Li cations. Co-diffusion effects on H exerted by Li on HER in the porous carbon matrix have been observed., Financial support by the Spanish Ministry of Science and Innovation (PDI2022- 126071OB-C21 and Severo Ochoa) and the Generalitat Valenciana (Prometeo 2021-038) are gratefully acknowledged. A.A. thanks assistance from Erasmus+ for partial support of her stay at Valencia. The European Commission is acknowledged for partial funding through the ECO2Fuel project.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

All-carbon microporous graphitic photocatalyst-promoted reduction of CO2 to CO in the absence of metals or dopant elements

  • García-Mulero, Ana
  • Asiri, Abdullah M.
  • Albero, J.
  • Primo, Ana
  • García Gómez, Hermenegildo
Microporous graphitic carbon (mp-C) derived from the pyrolysis of α-, β-, and γ-cyclodextrins exhibited photocatalytic activity in CO-saturated acetonitrile-water upon irradiation with UV-Vis light and in the presence of triethanolamine, forming H (19 μmol h) and CO (23 μmol h) accompanied by a lesser proportion of CH (4 μmol h). The most efficient was the mp-C material derived from α-cyclodextrin (mp-C) and having a pore dimension of 0.68 nm. The process also occured, although to a much lesser extent, under simulated sunlight or with UV-Vis irradiation in the absence of a sacrificial agent, with HO being the electron donor. The origin of the CO was proved by isotopic C labelling experiments. Photocurrent measurements proved the occurrence of charge separation and the increase in photocurrent intensity in the presence of CO. Transient absorption spectroscopy was used to detect the charge separate state decay in the microsecond time scale and proved that a fraction of the photogenerated electrons were able to react with CO, Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa, PID-2021-12607OB-C21 and RTI2018-89237-CO2-1) and Generalitat Valenciana (Prometeo 2021/083) are gratefully acknowledged. A. G.-M. thanks the Spanish Ministry of Science and Innovation for a postgraduate scholarship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal Nodes of Metal-Organic Frameworks can Activate Molecular Hydrogen

  • Melillo, A.
  • Franconetti, Antonio
  • Álvaro Rodríguez, Mercedes
  • Ferrer, B.
  • García Gómez, Hermenegildo
Hydrogenation of multiple bonds are among the most general and important organic reactions. Typical heterogeneous catalysts are based on transition metal nanoparticles, including noble metals. Data are presented here showing that metal nodes of MIL-101(Cr) and UiO-66 in the absence of occluded metal nanoparticles can promote hydrogenation of polarized X=Y double bonds of nitro and carbonyl groups. The catalytic activity is a function of the composition of the metal node and the organic linker. It is proposed that the reaction mechanism is based on the operation of frustrated Lewis acid/base pairs., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and PDI2021-126071-OB-CO21) and Generalitat Valenciana (Prometeo 2021-083) are gratefully acknowledged. Authors also thank the Galicia Supercomputing Centre (CESGA) for computational facilities., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Active site imprinting on Ti oxocluster metal-organic frameworks for photocatalytic hydrogen release from formic acid

  • García-Baldoví, Alberto
  • Del Angel, Raquel
  • Mouchaham, Georges
  • Liu, Shanping
  • Fan, Dong
  • Maurin-Pasturel, Guillaume
  • Navalón, Sergio
  • Serre, Christian
  • García Gómez, Hermenegildo
On-board hydrogen release from liquid organic carriers is a process that can make feasible the use of H as a transportation fuel. Formic acid is considered as one of the most convenient liquid hydrogen organic carriers, and since it can be easily obtained from CO, it is water soluble which makes it unnecessary to recover the H-depleted byproducts. Compared to the more conventional thermal catalytic decomposition of formic acid, the use of light in combination with a photocatalyst has been much less explored. Herein, we report a new paradigm in MOF photocatalysis with the use of a microporous titanium oxocluster based metal-organic framework (Ti-MOF) endowed with formate-imprinted active sites, namely MIP-177-LT (MIP stands for Materials from Institute of Porous Materials of Paris, LT for Low Temperature), as a highly efficient photocatalyst for H release from formic acid without the need to neutralize acidity or use sacrificial agents or noble metals. Noteworthily, a quantum efficiency of 22% has been determined for the photocatalytic H release that is highly remarkable for a non-toxic noble metal-free photocatalyst., Financial support from Spanish Ministerio de Ciencia e Innovación (PID2021-126071OB-C21 and Severo Ochoa) and Generalitat Valenciana (Prometeo 2017/083) is gratefully acknowledged. R. D. A. is thankful to CONACYT for the PhD grant 2018-000003-01EXTF-00075 (CVU: 697332). S. N. is gracious for the financial support from Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”. The computational work was performed using HPC resources from GENCI-CINES (Grant A0120907613)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal-Organic Frameworks as Photocatalysts for Solar-Driven Overall Water Splitting

  • Navalón, Sergio
  • Dhakshinamoorthy, Amarajothi
  • Álvaro Rodríguez, Mercedes
  • Ferrer, B.
  • García Gómez, Hermenegildo
Metal-organic frameworks (MOFs) have been frequently used as photocatalysts for the hydrogen evolution reaction (HER) using sacrificial agents with UV-vis or visible light irradiation. The aim of the present review is to summarize the use of MOFs as solar-driven photocatalysts targeting to overcome the current efficiency limitations in overall water splitting (OWS). Initially, the fundamentals of the photocatalytic OWS under solar irradiation are presented. Then, the different strategies that can be implemented on MOFs to adapt them for solar photocatalysis for OWS are discussed in detail. Later, the most active MOFs reported until now for the solar-driven HER and/or oxygen evolution reaction (OER) are critically commented. These studies are taken as precedents for the discussion of the existing studies on the use of MOFs as photocatalysts for the OWS under visible or sunlight irradiation. The requirements to be met to use MOFs at large scale for the solar-driven OWS are also discussed. The last section of this review provides a summary of the current state of the field and comments on future prospects that could bring MOFs closer to commercial application., S.N. is gracious for the financial support from Grant PID2021- 123856OB-I00 funded by MCIN/AEI/10.13039/ 501100011033 and by “ERDF A way of making Europe. The MOF2H2 project receives funding from the European Union Horizon Europe research and innovation programme under Grant Agreement N°101084131. The METHASOL project receives funding from the European Union Horizon 2020 research and innovation programme under Grant Agreement N°101022649. A.D. thanks the Universitat Politècnica de València for financial assistance through Maria Zambrano. H.G. is thankful for financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa) and the Generalitat Valenciana (Prometeo2021-038). H.G. is also gracious for the financial support from Grant PID2021-126071OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal–Organic Frameworks as Electrocatalysts

  • Peng, Yong
  • Sanati, Soheila
  • Morsali, Ali
  • García Gómez, Hermenegildo
Transition metal complexes are well-known homogeneous electrocatalysts. In this regard, metal–organic frameworks (MOFs) can be considered as an ensemble of transition metal complexes ordered in a periodic arrangement. In addition, MOFs have several additional positive structural features that make them suitable for electrocatalysis, including large surface area, high porosity, and high content of accessible transition metal with exchangeable coordination positions. The present review describes the current state in the use of MOFs as electrocatalysts, both as host of electroactive guests and their direct electrocatalytic activity, particularly in the case of bimetallic MOFs. The field of MOF-derived materials is purposely not covered, focusing on the direct use of MOFs or its composites as electrocatalysts. Special attention has been paid to present strategies to overcome their poor electrical conductivity and limited stability., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and PDI2021-126071-OB-C21), Generalitat Valenciana (Prometeo 2021-038) and Tarbiat Modares University is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Recent Advances in the Use of Covalent Organic Frameworks as Heterogenous Photocatalysts in Organic Synthesis

  • López Mangano, Alberto
  • Dalirian, Saba
  • Reza Oveisi, Ali
  • Mas-Ballesté, Rubén
  • Dhakshinamoorthy, Amarajothi
  • Alemán, José
  • García Gómez, Hermenegildo
  • Luque, Rafael
Organic photochemistry is intensely developed in the 1980s, in which the nature of excited electronic states and the energy and electron transfer processes are thoroughly studied and finally well-understood. This knowledge from molecular organic photochemistry can be transferred to the design of covalent organic frameworks (COFs) as active visible-light photocatalysts. COFs constitute a new class of crystalline porous materials with substantial application potentials. Featured with outstanding structural tunability, large porosity, high surface area, excellent stability, and unique photoelectronic properties, COFs are studied as potential candidates in various research areas (e.g., photocatalysis). This review aims to provide the state-of-the-art insights into the design of COF photocatalysts (pristine, functionalized, and hybrid COFs) for organic transformations. The catalytic reaction mechanism of COF-based photocatalysts and the influence of dimensionality and crystallinity on heterogenous photocatalysis performance are also discussed, followed by perspectives and prospects on the main challenges and opportunities in future research of COFs and COF-based photocatalysts., A.L.-M. and S.D. contributed equally to this work (both co-authors are the first author). The authors acknowledge financial support from the Iran Science Elites Federation (ISEF) and the University of Zabol (grant number: IR-UOZ-GR-9381). This work was supported by RUDN University strategic academic leadership program (R.L.). Financial support was provided by the Spanish Government (PID2021-122299NB-100), “Comunidad de Madrid” for European Structural Funds (S2018/NMT-4367) and proyectos sinergicos I+D (Y2020/NMT-6469). H.G. acknowledges financial support received from various funding agencies (PDI-2021-0126071-OB-CO21, Prometeo 2021-038 and CEX-2021-001230-S). A.D. thanks the Spanish Ministry of Science and Education for a Maria Zambrano contract. A.L.-M. thanks UAM for a FPI-UAM predoctoral fellowship., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Positive influence of minute Pt addition on the activity of Ni supported on defective graphene for hydrogenation/dehydrogenation of N-ethylcarbazole as liquid organic carrier

  • García-Baldoví, Alberto
  • Peng, Lu
  • Dhakshinamoorthy, Amarajothi
  • Asiri, Abdullah M.
  • Primo, Ana
  • García Gómez, Hermenegildo
Ni nanoparticles (≈ 8 nm) have been prepared at about 15 wt% loading strongly grafted on N-doped graphitic carbon matrix [Ni@(N)C] by pyrolysis of Ni(OAc) adsorbed on chitosan. Ni@(N)C was used as catalyst for H storage/release on N-ethylcarbazole (EC). Ni@(N)C exhibits higher H storage capacity than analogous Ni nanoparticles (NPs) supported on silica. The addition of minute amounts (18 ppm) of Pt increases significantly the H storage/release activity of Ni@(N)C due to effect of Pt promoting H spill over the Ni NPs. There is no linear correlation between Pt concentration and hydrogenation/dehydrogenation activity of Ni@(N)C, the lowest Pt loading (18 ppm) resulting in the most efficient Pt/Ni@(N)C for hydrogenation-dehydrogenation of EC. This fact was attributed to the presence of small Pt clusters or single atoms, while higher concentration would correspond to a less-efficient larger cluster regime. The most efficient Pt/Ni@(N)C-18 catalyst was used for four consecutive hydrogenation/dehydrogenation cycles, exhibiting some fatigue in the H storage/release of the same EC batch that was attributed to the increase in the product mixture complexity upon cycling, with the formation of some intermediates that undergo more difficult hydrogenation/dehydrogenation reaction as well as partial catalyst deactivation. After four cycles, (Pt)Ni@(N)C exhibits in the fifth use a H storage capacity of 5.2 wt%, somewhat lower than the 5.8 wt% H capacity of the fresh sample, while no changes in the XRD, TEM and XPS characterization of the five-times used catalyst compared to the fresh material is observed., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa Center of Excellence CEX2021-001230-S and PDI2021-12607108-C21, both funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021-38 and MFA/2022/023) is gratefully acknowledged. A.D. thanks the Spanish Ministry of Science and Education for a Maria Zambrano contract. L.P. was the recipient of a Grisolia fellowship., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal organic framework composites for reduction of CO2

  • Liu, Kuan-Guan
  • Bigdeli, Fahime
  • Panjehpour, Akram
  • Morsali, Ali
  • Dhakshinamoorthy, Amarajothi
  • García Gómez, Hermenegildo
Global warming due to greenhouse gases is a major current environmental threat. In today's world those applicable technologies which convert CO into valuable and environmentally friendly fuels and chemicals are of great importance. Thanks to functional sites or guests embedded in the structure, metal organic frameworks (MOFs) show a superb potential for such a conversion that is even further enhanced in MOF composites. The present review discusses the use of MOF composites, with an emphasis on their constituent components, as catalysts for CO reduction, converting it into various value-added and environmentally friendly chemicals such as saturated and unsaturated hydrocarbons, carboxylic acids and carboxylates, and carbon monoxide. The present review covers four major approaches for CO reduction, including electroreduction, photoreduction, photoelectroreduction, and hydrogenation. All reports on the design and development of appropriate MOF composites to be used in the above-mentioned CO reductions have been considered. Finally, the future outlook on the use of MOF composites in CO reduction is provided, giving some ideas for further design highly efficient MOF composites capable of converting CO to value-added products., The authors gratefully acknowledge from Tarbiat Modares University and the support received from the Niroo Research Institute (NRI) under the contract number 99/50420/152. This work was supported by the National Natural Science Foundation of China (Grant No. 92161106), the Natural Science Foundation of Ningxia (Grant No. 2022AAC05017), and the Foundation of State Key Laboratory of Physical Chemistry of Solid Surfaces (Grant No. 202013). Financial support by the Spanish Ministry of Science and Innovation (PDI-2021-0126071-OB-CO21) and Generalitat Valenciana (Prometeo 2021-038) is gratefully acknowledged. This study forms part of the Advanced Materials programme and was supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat Valenciana (Graphica MFA/2022/023. The Institute is a Center of Excellence Severo Ochoa (CEX-2021-001230-S). A.D. is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Challenges and opportunities for N-hydroxyphthalimide supported over heterogeneous solids for aerobic oxidations

  • Caruso, Manfredi
  • Navalón, Sergio
  • Cametti, Massimo
  • Dhakshinamoorthy, Amarajothi
  • Punta, Carlo
  • García Gómez, Hermenegildo
Organocatalysis, in combination with, or as an alternative to the use of metals, is attracting increasing interest as a sustainable route to promote selective transformations. In this context, N-hydroxyphthalimide (NHPI) has found ample application as an effective organocatalyst capable to promote the aerobic oxidation of a wide range of organic substrates, including saturated and unsaturated hydrocarbons, alcohols, amines and sulphides among others. However, most of these transformations required the use of NHPI dissolved in solution, with consequent limits in the scale-up of the process. Leaving aside the reviews of NHPI as organocatalyst in homogeneous phase, the present review describes the strategies reported to support or anchor NHPI on a wide range of insoluble solids, thus converting this homogeneous organocatalyst into a heterogeneous system, with the consequent advantages related to the ease of separation and recovery of the catalyst from the reaction medium, its recyclability and the possibility to develop continuous flow reactions. After a brief introductory section, a detailed description of the catalytic mechanism is here presented, also providing a comparison between NHPI and 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) radical, and by highlighting the main challenges associated to NHPI heterogenization. The critical description of the heterogeneous solutions is organized according to the nature of the support, focusing on metal–organic frameworks (MOFs), organic polymers, carbon-based materials, and inorganic supports, while the growing use of NHPI-containing photocatalysts is presented separately. In the final section, we outline the main achievements on the use of NHPI heterogeneous catalysis and provide our views for future developments in the area., S.N. is gracious for the financial support from Grant PID2021-123856OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe. A.D. is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). H.G. is thankful for financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa Financial support by Spanish Ministry of Science and Innovation (CEX2021-001230-S/funding by MCIN/AEI/10.13039/501100011033) and the Generalitat Valenciana (Prometeo2021-038). H.G. is also gracious for the financial support from Grant PID2021-126071OB-C21 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancement of the photocatalytic hydrogen production with the exfoliation degree of Nb2C cocatalyst

  • Ramírez Grau, Rubén
  • Lewandowska-Andralojc, Anna
  • Primo, Ana
  • García Gómez, Hermenegildo
Niobium-carbide, NbC, a member of MXene family, has recently drawn considerable attention in photocatalytic H production as potential candidate to replace Pt as co-catalyst owing to its favorable physical and chemical properties. The present study explored the influence of the exfoliation level and surface area in suspension on the photocatalytic activity toward hydrogen production of NbC as cocatalyst and Eosin Y as photosensitizer. It was found that a NbC sample obtained by chemical etching and 4 h sonication (NbC-4h) with a high specific surface area in aqueous suspension of 161 m ×g measured by the methylene blue method showed the highest hydrogen generation rate (10,290μmolhg), 3.2 (1 mg m L) or 1.7 (0.7 mg m L) times higher than that of NbC obtained by chemical etching without post-synthetic sonication that has 55 m ×g of specific surface area in suspension. The increased performance of NbC-4h surpassing many reported photocatalysts was attributed to the beneficial influence of the exposed surface area and level of exfoliation of the MXene sheets. Our results demonstrate the importance of exfoliation to achieve a high surface area in suspension, diminishing the number of layers of the MXene flakes on photocatalytic applications., Financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa and PID2021-126071-OB-CO21) and Generalitat Valenciana (Prometeo 2021-038) are gratefully acknowledged. R.R.-G. also thanks the Ministry of Science and Innovation for a postgraduate scholarship. A.L-A thanks for funding under the project at AMU “Initiative of Excellence - Research University” (proposal no. 038/04/NŚ/0012)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Co-doped hydroxyapatite as photothermal catalyst for selective CO2 hydrogenation

  • Peng, Yong
  • Szalad, Horatiu
  • Nikacevic, Pavle
  • Gorni, Giulio
  • Goberna-Ferrón, Sara
  • Simonelli, Laura
  • Albero, J.
  • López, Nuria
  • García Gómez, Hermenegildo
The rational design and in deep understanding of efficient, affordable and stable materials to promote the light-assisted production of fuels and commodity chemicals is very appealing for energy crisis and climate change amelioration. Herein, we have prepared a series of Co-doped hydroxyapatite (HAP) catalysts with different Co content. The materials structure has been widely investigated by XRD, FT-IR, HRTEM, XPS, XAS, as well as computational simulations based on Density Functional Theory (DFT) with PBE functional. At low Co loading, there is a partial substitution of Ca cations in the HAP structure, while higher loadings promote the precipitation of small (∼ 2 nm) Co nanoparticles on the HAP surface. For the optimal Co content, a constant CO rate of 62 mmol·g·h at 1 sun illumination and 400 °C, with the material being stable for 90 h. Visible and NIR photons have been determined responsible of the light-assisted activity enhanced. Mechanistic studies based on both experimental and DFT simulations show that H preferentially adsorbs to metallic Co, while CO adsorbs to the HAP surface oxygen. Moreover, both direct photo- and plasmon-driven contributions have been separated in order to study their mechanisms independently., Financial support by European Comission (FlowPhotoChem Grant Agreement 862453 and Solar2Chem grant agreement 861151), The Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S financed by MCIN/AEI/10.13039/501100011033, PDI2021-126071-OB-C21 financed by MCIN/AEI/10.13039/501100011033 and by FEDER "Una manera de hacer Europa", and PLEC2021-7831 financed by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR), and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital) are gratefully acknowledged. J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I) financed by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR). P. N. and N. L. thank the Spanish Ministry of Science and Innovation for financial support PID2021-122515OB-I00, and Severo Ochoa Grant MCIN/AEI/10.13039/501100011033 CEX2019-000925-S) and Barcelona Supercomputing Center-MareNostrum (BSC-RES) for providing generaous computational resources., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-1230-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000925-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient bifunctional hydrogen and oxygen evolution reaction electrocatalyst based on the NU-1000/CuCo2S4 heterojunction

  • Sanati, Soheila
  • Morsali, Ali
  • García Gómez, Hermenegildo
One of the current necessities to produce clean energy is the logical design of inexpensive noble-metal free electrocatalysts with developed structure and composition for electrochemical water splitting. In this study, we introduce a new core-shell-structured bifunctional electrocatalyst of NU-1000/CuCoS for oxygen evolution reaction (OER), hydrogen evolution reaction (HER) and overall water splitting for the first time. Own to unique structure with rich porosity, high electrical conductivity, high stability and larger density of active sites, this nanocomposite can produce water electrolysis in a 1 M KOH solution. The electrochemical measurements show overpotentials of 335 mV for OER and 93 mV for HER at a current density of 10 mAcm. Also, the NU-1000/CuCoS nanocomposite exhibits Tafel slope values of 110 mV dec and 103 mV dec for HER and OER, respectively. Besides, NU-1000/CuCoS presents a significant long-term stability in a 72 h run. Additionally, NU-1000/CuCoS requires 1.55 V to deliver 10 mA cm current density in overall water splitting. According to these results, we hope to use this electrocatalyst in producing oxygen and hydrogen from water., This work was supported by Tarbiat Modares University and financial support by the Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S and PDI2021-126071OB-C2198237-CO2-1) and Generalitat Valenciana (Prometeo 2021-038) is gratefully acknowledged., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021-1230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New Opportunities in Metal-Organic Framework Catalysis: From Bifunctional to Frustrated Lewis Pairs Catalysis

  • Dhakshinamoorthy, Amarajothi
  • Asiri, Abdullah M.
  • García Gómez, Hermenegildo
This article highlights novel prospects for metal–organic frameworks (MOFs) in heterogeneous catalysis as having frustrated Lewis acid-base pairs (FLPs) or as bifunctional acid-base solid catalysts able to activate molecular hydrogen. Starting from the extensive application MOFs as Lewis acid and Lewis base catalysts, this article uses catalytic hydrogenation to briefly summarize the efforts made to heterogenize boron and amine in MOFs to mimic molecular FLP systems. The core of this concept is based on recent findings which demonstrate the ability of two commonly used MOFs, namely UiO-66 and MIL-101, to catalyze the selective hydrogenation of polar double X=Y bonds at moderate H pressures below 10 bar. The influence of electron-donating, the withdrawal of substituents on the linker, and the aniline poisoning effect highlight the significance of Lewis acid sites, while density-functional theory calculations indicate the heterolytic H−H bond cleavage at the MOF metal oxo clusters. It is expected that this new perspective on MOFs as solid FLP systems will spur further research to explore and define the potential of dual sites in the catalytic activation of small molecules., Financial support by the Spanish Ministry of Science and Innovation (PDI-2021-0126071-OB-CO21) and Generalitat Valenciana (Prometeo 2021-038) is gratefully acknowledged. The Institute is a Center of Excellence Severo Ochoa (CEX-2021-001230-S). AD is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX-2021-001230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Light-assistance in nitrogen fixation to ammonia by highly dispersed Cs-promoted Ru clusters supported on ZrO2

  • Peng, Y.
  • Melillo, A.
  • Shi, Run
  • Forneli, Amparo
  • Franconetti, Antonio
  • Albero, J.
  • García Gómez, Hermenegildo
Light-assisted N fixation to NH under mild conditions is attracting massive attention to circumvent energy crisis and global warming. Herein, highly dispersed Cs-decorated Ru sub-nanometric clusters supported on ZrO NPs have been prepared by means of MOF-templated transformation method. The obtained catalyst exhibited N hydrogenation activity of 1.6 mmol g h in the dark (350 °C, 0.1 MPa). Remarkably this value increased by over 300 %, reaching 5.1 mmol g h (204 mmol g h) under 1 Sun power illumination (1080 W/m) The influence of the incident light wavelength has been evaluated, revealing 81 % and 213 % enhancement in the NIR and visible region, respectively. DFT calculations were carried out to understand the static adsorption states of Ru sub-nanoclusters. Mechanistic studies have confirmed the co-existence of a photothermal and a nonthermal-hot electron mechanism. XPS, PXRD and FTIR analysis have determined that the Cs species block surface Zr acidity, increasing the basicity of the ZrO support. Moreover, partially reduced Cs (0 <δ < 1) species surrounding the Ru active sites are donating electron density to the adjacent Ru sites, favoring N adsorption and subsequent activation. Finally, this photocatalyst has shown an extended stability for 100 h irradiation under continuous flow., Financial support by the Spanish Ministry of Science and Innovation (PDI2021–126071-OB-C21 financed support by MCIN/AEI/10.13039/501100011033 and by FEDER "Una manera de hacer Europa"), and Severo Ochoa (CEX2021–1230-S financed support by MCIN/AEI/10.13039/501100011033) is gratefully acknowledged. Generalitat Valenciana (Prometeu 2021–038 and MFA-2022–023 financed by European Union-Next Generation EU, through the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital) and European Union Horizon 2020 Research and Innovation Programme (FlowPhotoChem Grant Agreement 862453) are also gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021–031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2021–1230-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polyoxometalate-Stabilized Silver Nanoparticles and Hybrid Electrode Assembly Using Activated Carbon

  • Goberna-Ferrón, Sara
  • Cots, Laia
  • Perxés Perich, Marta
  • Zhu, Jun-Jie
  • Gómez-Romero, P.
The intersection between the field of hybrid materials and that of electrochemistry is a quickly expanding area. Hybrid combinations usually consist of two constituents, but new routes toward more complex and versatile electroactive hybrid designs are quickly emerging. The objective of the present work is to explore novel triple hybrid material integrating polyoxometalates (POMs), silver nanoparticles (Ag NPs), and activated carbon (AC) and to demonstrate its use as a hybrid electrode in a symmetric supercapacitor. The tri-component nanohybrid (AC/POM-Ag NPs) was fabricated through the combination of AC with pre-synthesized ∼27 nm POM-protected Ag NPs (POM-Ag NPs). The POM-Ag NPs were prepared using a green electrochemical method and characterized via UV-vis and IR spectroscopy, electron microscopy, dynamic light scattering (DLS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and cyclic voltammetry (CV). Afterward, the AC/POM-Ag NPs ternary nanocomposite material was constructed and characterized. The electrochemical behavior of AC/POM-Ag NPs’ modified electrodes reveal that the nanomaterial is electroactive and exhibits a moderately higher specific capacitance (81 F/g after 20 cycles) than bare AC electrodes (75 F/g) in a symmetrical supercapacitor configuration in the voltage range 0 to 0.75 V and 20 mV/s, demonstrating the potential use of this type of tri-component nanohybrid for electrochemical applications., This project has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No 894270. This research was funded by the postdoctoral fellowship program Beatriu de Pinós, funded by the Commission for Universities and Research of the Department of Innovation, Universities, and Enterprise of the Generalitat de Catalunya and by the Horizon 2020 program of research and innovation of the European Union under the Marie Skłodowska-Curie grant agreement No 801370. This work was supported by the project PID2021-126071OB-C21 funded by MCIN/ AEI /10.13039/501100011033/ and by FEDER finance programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Long-Lived Photo-Response of Multi-Layer N-Doped Graphene-Based Films

  • Odutola, Jokotadeola A.
  • Szalad, Horatiu
  • Albero, J.
  • García Gómez, Hermenegildo
  • Tkachenko, Nikolai V.
New insights into the mechanism of the improved photo(electro)catalytic activity of graphene by heteroatom doping were explored by transient transmittance and reflectance spectroscopy of multi-layer N-doped graphene-based samples on a quartz substrate prepared by chitosan pyrolysis in the temperature range 900-1200 °C compared to an undoped graphene control. All samples had an expected photo-response: fast relaxation (within 1 ps) due to decreased plasmon damping and increased conductivity. However, the N-doped graphenes had an additional transient absorption signal of roughly 10 times lower intensity, with 10-50 ps formation time and the lifetime extending into the nanosecond domain. These photo-induced responses were recalculated as (complex) dielectric function changes and decomposed into Drude-Lorentz parameters to derive the origin of the opto(electronic) responses. Consequently, the long-lived responses were revealed to have different dielectric function spectra from those of the short-lived responses, which was ultimately attributed to electron trapping at doping centers. These trapped electrons are presumed to be responsible for the improved catalytic activity of multi-layer N-doped graphene-based films compared to that of multi-layer undoped graphene-based films., The authors thank the European Union’s Horizon 2020 research and innovation program for the funding received under the Marie Skłodowska-Curie grant agreement no. 861151 (SOLAR2CHEM). N.V.T. thanks the Academy of Finland Flagship Programme, Photonics Research and Innovation (PREIN), Decision no. 320165 for the financial support. J.A. and H.G. thank the European Union’s Horizon 2020 research and innovation programme METHASOL under grant agreement no. 101022649, the Spanish Ministry of Science and Innovation (PDI2021-126071OB-C2), and Generalitat Valenciana (Prometeo 2021-038) for the financial support. J.A. is also grateful to the Ramon y Cajal grant (RYC2021-031006-I funded by MCIN/AEI/10.13039/501100011033 and EU NextGenerationEU/PRTR.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective Gas-Phase Hydrogenation of CO2 to Methanol Catalysed by Metal-Organic Frameworks

  • Dhakshinamoorthy, Amarajothi
  • Navalón, Sergio
  • Primo, Ana
  • García Gómez, Hermenegildo
Large scale production of green CHOH obtained from CO and green H is a highly wanted process due to the role of CHOH as H/energy carrier and for producing chemicals. Starting with a short summary of the advantages of metal–organic frameworks (MOFs) as catalysts in liquid-phase reactions, the present article highlights the opportunities that MOFs may offer also for some gas-phase reactions, particularly for the selective CO hydrogenation to CHOH. It is commented that there is a temperature compatibility window that combines the thermal stability of some MOFs with the temperature required in the CO hydrogenation to CHOH that frequently ranges from 250 to 300 °C. The existing literature in this area is briefly organized according to the role of MOF as providing the active sites or as support of active metal nanoparticles (NPs). Emphasis is made to show how the flexibility in design and synthesis of MOFs can be used to enhance the catalytic activity by adjusting the composition of the nodes and the structure of the linkers. The influence of structural defects and material crystallinity, as well as the role that should play theoretical calculations in models have also been highlighted., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). AD is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). S.N. thanks the support of Grant PID2021-123856OBI00 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe. The METHASOL project receives funding from the European Union Horizon 2020 research and innovation programme under Grant Agreement N°101022649.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unraveling the Influence of Shell Thickness in Organic Functionalized Cu2O Nanoparticles on C2+ Products Distribution in Electrocatalytic CO2 Reduction

  • Hu, Jiajun
  • Osella, Silvio
  • Albero, J.
  • García Gómez, Hermenegildo
Cu-based electrocatalysts exhibit enormous potential for electrochemical CO conversion to added-value products. However, high selectivity, specially toward C products, remains a critical challenge for its implementation in commercial applications. Herein, the study reports the preparation of a series of electrocatalysts based on octadecyl amine (ODA) coated CuO nanoparticles (NPs). HRTEM images show ODA coatings with thickness from 1.2 to 4 nm. DFT calculations predict that at low surface coverage, ODA tends to lay on the CuO surface, leaving hydrophilic regions. Oppositely, at high surface coverage, the ODA molecules are densely packed, being detrimental for both mass and charge transfer. These changes in ODA molecular arrangement explain differences in product selectivity. In situ Raman spectroscopy has revealed that the optimum ODA thickness contributes to the stabilization of key intermediates in the formation of C products, especially ethanol. Electrochemical impedance spectroscopy and pulse voltammetry measurements confirm that the thicker ODA shells increase charge transfer resistance, while the lowest ODA content promotes faster intermediate desorption rates. At the optimum thickness, the intermediates desorption rates are the slowest, in agreement with the maximum concentration of intermediates observed by in situ Raman spectroscopy, thereby resulting in a Faradaic efficiency to ethanol and ethylene over 73%., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). Participation in the EU project ECO2Fuel is gratefully acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021–031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR), and Generalitat Valenciana (CIGE 2022–093) financed by European Union-Next Generation EU, through the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital. J.H. thanks the Chinese Scholarship Council for doctoral fellowship. S.O. acknowledges the National Science Centre, Poland (grant no. UMO/2020/39/I/ST4/01446) and the “Excellence Initiative – Research University” (IDUB) Program, Action I.3.3 – “Establishment of the Institute for Advanced Studies (IAS)” for funding (grant no. UW/IDUB/2020/25). The computation was carried out with the support of the Interdisciplinary Center for Mathematical and Computational Modeling at the University of Warsaw (ICM UW) under grants no. G83-28 and GB80-24., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective oxidative coupling of amines through light-activated bismuth halide perovskites

  • Lopes, J. C.
  • Albero, J.
  • Sampaio, Maria J.
  • Silva, Cláudia G.
  • García Gómez, Hermenegildo
  • Faria, Joaquim L.
Bismuth halide perovskites have emerged as promising alternatives for sustainable and efficient photocatalysts for light-induced organic transformations. Caesium bismuth halide perovskites (CsBi(ClBr)) with different ratios of chloride and bromide were synthesised using a one-step solution process. These perovskites were then employed as photocatalysts for the photocatalytic oxidative coupling of benzylamine (BZA) to produce N-benzylidenebenzylamine (BZI) under ultraviolet-visible light radiation at ambient conditions. The incorporation of bromide ions into the chloride-based perovskite resulted in a noticeable reduction in the bandgap, leading to an enhancement in the photocatalytic activity. Conversely, the addition of chloride ions within the bromide-based perovskite was found to be beneficial for the material's photostability while simultaneously maintaining its high photocatalytic activity. The optimal compromise between the stability and photocatalytic activity for the BZI production was achieved using CsBi(ClBr), being attained a total BZA conversion and the maximum BZI production with 100 % of selectivity after 6 hours of irradiation. The efficiency of this photocatalyst was ascribed to the highest current density observed during the photocurrent experiments, which improves the charge carrier mobility of the resulting material., This work was supported by national funds through FCT/MCTES (PIDDAC): LSRE-LCM, UIDB/50020/2020 (DOI: 10.54499/UIDP/50020/2020) and UIDP/50020/2020 (DOI: 10.54499/UIDP/50020/2020); and ALiCE, LA/P/0045/2020 (DOI: 10.54499/LA/P/0045/2020). The authors also thank the project ClimActic (NORTE-01-0145-FEDER-000071), funded by European Regional Development Fund (ERDF) through COMPETE2020 – Programa Operacional Competitividade e Internacionalização (POCI) and by national funds (PIDDAC) through FCT/MCTES. H.G. and J. A. thank the financial support from the Spanish Ministry of Science and Innovation (Severo Ochoa CEX2021-1230-S financed by MCIN/AEI/10.13039/501100011033, PDI2021-126071-OB-C21 financed by MCIN/AEI/10.13039/501100011033 and by FEDER “Una manera de hacer Europa”, and PLEC2021-7831 financed by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/ PRTRCEX2021-1230-S) and Generalitat Valenciana (Prometeu 2021-038 and MFA-2022-023 financed by European Union-Next Generation EU, through the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital). J.A. also thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I financed by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR)). JCL acknowledges the PhD research grant from FCT, Ref. 2020.04651.BD. . MJS acknowledges FCT funding under the Scientific Employment Stimulus - Institutional Call (CEECINST/00010/2021)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of morphology and composition of spherical layered double hydroxide particles and derived mixed oxides on photocatalytic CO2 reduction

  • Molina-Muriel, Manuel
  • Eledath-Changarath, Mahesh
  • Dhingra, Archit
  • Albero, J.
  • Sánchez-Royo, Juan F
  • Ribera, Antonio
  • García Gómez, Hermenegildo
Considering the flexibility in the synthesis that allows the formation of materials with more than two metals, the present study reports the preparation of trimetallic layered double hydroxides (LDHs) having Al as structural tri-positive cation, Ti as photocatalytically active d transition metal and either Ni or Co as dipositive cation. In addition, these LDHs were used as precursors of the corresponding trimetallic mixed oxides (MO). LDH and MO materials in combination with Ru(bpy)Cl as photosensitizer and triethanolamine as sacrificial electron donor were used as catalysts for CO reduction under solar light irradiation. A different product selectivity, either CH for Ni-LDH or CO and H for Co-MO, was observed with production rates for CH or CO that are among the highest reported for these systems. The role of the inorganic materials in the photocatalytic process was supported by transient absorption spectroscopy that revealed the quenching of the Ru(bpy)Cl triplet excited state by Ni-LDH or Co-MO. An important finding was that the trimetallic Co-Ti-Al oxide with cobaltite structure is able to perform CO reduction in spite that the reduction potential of its conduction band is not sufficient to perform the process, evidence by photoluminescence revealing the existence of an upper electronic state responsible for the reduction. These results show the interest in screening multimetallic materials in photocatalysis due to their improved performance and diverse properties., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021–001230-S, PID2021–0126071-OB-CO21 and PID2021–125907NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER) and Generalitat Valenciana (Prometeo 2021–038, CIPROM-2022–60 and Advanced Materials Program MFA-2022–023 and MFA-2022–057 with funding from European Union Next Generation EU PRTR-C17.I1) are gratefully acknowledged. M. M. thanks the Universitat Politècnica de Valencia for a postgraduate scholarship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Natural Sunlight-Driven Photocatalytic Overall Water Splitting with 5.5% Quantum Yield Promoted by Porphyrin-Sensitized Zn Poly(heptazine imide)

  • Szalad, Horatiu
  • Uscategui, Andres
  • García-Muelas, Rodrigo
  • Galushchinskiy, Alexey
  • Savateev, Oleksandr
  • Antonietti, Markus
  • Albero, J.
  • García Gómez, Hermenegildo
Meso-tetrakis(4-carboxyphenyl)porphyrin (HTCPP) has been loaded on a partially exchanged Zn poly(heptazine imide) (PHI), changing the light harvesting properties of the system, without altering the PHI structure. At the optimal loading (20 wt %), the photosensitized (Zn/K)-PHI is able to produce 1.06 mmol/g and 0.46 mmol/g after 12 h of reaction irradiation of Milli-Q water under visible light by a 100 mW/cm white LED. The apparent quantum yield for the overall water splitting reaction was 5.5% at 400 nm and 2% at 700 nm. Outdoor water splitting irradiation with natural sunlight shows the feasibility of the process. The photocatalytic performance of TCPP20%@(Zn/K)-PHI is considerably higher than that of analyzed reference samples such as graphitic carbon nitride, poly(triazine imide), and potassium PHI with HTCPP photosensitization. These relative photocatalytic activities point out the relevance of the PHI structure and the presence of Zn. It is proposed that Zn simultaneously binds PHI and HTCPP. Transient absorption spectroscopy supports the occurrence of photoinduced electron transfer in which electrons are located at the HTCPP and holes at the PHI moiety. Transient photocurrent measurements show a higher charge separation efficiency on TCPP20%@-(Zn/K)-PHI compared to (Zn/K)-PHI, and measurement of the frontier orbitals indicates an adequate energy alignment of the HOMO/LUMO levels of TCPP with respect to (Zn/K)-PHI. The results show the possibility of developing efficient noble metal-free photocatalytic systems based on PHI dye sensitization., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials program Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1) is acknowledged. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR) and for the financial support (PID2022-141099OA-I00 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR). R.G.M. gratefully acknowledges the generous high-performance computing time provided by CETA-CIEMAT in their Turgalium cluster. H.S. thanks the European ITN Solar2Chem for a postgraduate fellowship. The authors gratefully acknowledge The Max Planck Society for financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photocatalytic activity of a 2D copper porphyrin metal-organic framework for visible light overall water splitting

  • Uscategui, Andres
  • Szalad, Horatiu
  • Albero, J.
  • García Gómez, Hermenegildo
A 2D copper tetrakis(4-carboxyphenyl)porphyrin metal-organic framework has been prepared and used as a photocatalyst for overall water splitting, measuring under visible light irradiation (λ > 450 nm) under one sun power conditions a H production rate of 120 μmol g h that is among the highest ever reported. While the 2D Cu porphyrin MOF undergoes substantial degradation in 3 h upon UV irradiation (320-380 nm) in the presence of air, it appears to be photostable under the conditions of the overall water splitting and visible light exposure, exhibiting similar temporal profiles for H and O evolution. Photocurrent experiments and band energy measurements indicate that the photocatalytic efficiency derives from an efficient charge separation in the visible region (apparent electron charge extraction efficiency at 540 nm of 0.1%) and adequate alignment of the redox potential of the conduction (−0.59 V vs. NHE) and valence (+1.48 V vs. NHE) bands for water splitting., Financial support from the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1), and the European Commission (MOF2H2; Grant Agreement 101084131) is gratefully acknowledged. J. A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021-031006-I funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR) and the financial support (PID2022-141099OA-I00 funded by MCIN/AEI/10.13039/501100011033 and by European Union NextGenerationEU/PRTR).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanometric Cu-ZnO Particles Supported on N-Doped Graphitic Carbon as Catalysts for the Selective CO2 Hydrogenation to Methanol

  • Peng, Lu
  • Jurca, Bogdan
  • García-Baldoví, Alberto
  • Tian, Liang
  • Sastre, Germán
  • Primo, Ana
  • Parvulescu, Vasile
  • Dhakshinamoorthy, Amarajothi
  • García Gómez, Hermenegildo
The quest for efficient catalysts based on abundant elements that can promote the selective CO hydrogenation to green methanol still continues. Most of the reported catalysts are based on Cu/ZnO supported in inorganic oxides, with not much progress with respect to the benchmark Cu/ZnO/AlO catalyst. The use of carbon supports for Cu/ZnO particles is much less explored in spite of the favorable strong metal support interaction that these doped carbons can establish. This manuscript reports the preparation of a series of Cu-ZnO@(N)C samples consisting of Cu/ZnO particles embedded within a N-doped graphitic carbon with a wide range of Cu/Zn atomic ratio. The preparation procedure relies on the transformation of chitosan, a biomass waste, into N-doped graphitic carbon by pyrolysis, which establishes a strong interaction with Cu nanoparticles (NPs) formed simultaneously by Cu salt reduction during the graphitization. Zn ions are subsequently added to the Cu–graphene material by impregnation. All the Cu/ZnO@(N)C samples promote methanol formation in the CO hydrogenation at temperatures from 200 to 300 °C, with the temperature increasing CO conversion and decreasing methanol selectivity. The best performing Cu-ZnO@(N)C sample achieves at 300 °C a CO conversion of 23% and a methanol selectivity of 21% that is among the highest reported, particularly for a carbon-based support. DFT calculations indicate the role of pyridinic N doping atoms stabilizing the Cu/ZnO NPs and supporting the formate pathway as the most likely reaction mechanism., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Defect-Engineered Metal-Organic Framework/Polyimide Mixed Matrix Membrane for CO2 Separation

  • Mashhadikhan, Samaneh
  • Amooghin, Abtin Ebadi
  • Masoomi, Mohammad Y.
  • Sanaeepur, Hamidreza
  • García Gómez, Hermenegildo
Defect-engineered metal–organic frameworks (MOFs) with outstanding structural and chemical features have become excellent candidates for specific separation applications. The introduction of structural defects in MOFs as an efficient approach to manipulate their functionality provides excellent opportunities for the preparation of MOF-based mixed matrix membranes (MMMs). However, the use of this strategy to adjust the properties and develop the separation performance of gas separation membranes is still in its early stages. Here, a novel defect-engineered MOF (quasi ZrFum or Q-ZrFum) was synthesized via a controlled thermal deligandation process and incorporated into a CO-philic 6FDA-durene polyimide (PI) matrix to form Q-ZrFum loaded MMMs. Defect-engineered MOFs and fabricated MMMs were investigated regarding their characteristic properties and separation performance. The incorporation of defects into the MOF structure increases the pore size and provides unsaturated active metal sites that positively affect CO molecule transport. The interfacial compatibility between the Q-ZrFum particles and the PI matrix increases via the deligandation process, which improves the mechanical strength of Q-ZrFum loaded membranes. MMM containing 5 wt.% of defect-engineered Q-ZrFum exhibits excellent CO permeability of 1308 Barrer, which increased by 99 % compared to the pure PI membrane (656 Barrer) at a feed pressure of 2 bar. CO/CH and CO/N selectivity reached 44 and 26.6 which increased by about 70 and 16 %, respectively. This study emphasizes that defect-engineered MOFs can be promising candidates for use as fillers in the preparation of MMMs for the future development of membrane-based gas separation applications., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union Next Generation EU PRTR-C17.I1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

LDH-derived CoTiAl mixed oxide as catalyst for photo-assisted CO2 hydrogenation

  • Molina-Muriel, Manuel
  • Peng, Yong
  • Szalad, Horatiu
  • Ribera, Antonio
  • García Gómez, Hermenegildo
A layered double hydroxide (LDH) has been used as precursor for the synthesis of a multimetallic mixed oxide with photocatalytic activity. Thus, a trimetallic CoTiAl LDH has been synthesized as spherical aggregates of nanosheets. Analysis at short synthesis times indicates that CoTiAl-LDH particles grow perpendicular to initially formed oligomeric Ti-lactate nuclei. Calcination of CoTiAl-LDH at 400 °C affords the corresponding CoTiAl mixed oxide (MO) with low crystallinity having a cobaltite structure, while also maintaining the morphology. This CoTiAl-MO exhibits at 200 °C photocatalytic activity for CO hydrogenation to CO, accompanied with lesser amounts of CH, with remarkable apparent quantum yields at 365 nm of 7.0 and 4.6 for CO and CH, respectively and very low apparent activation energy for 10 kJ/mol. The present results show a promising direction to exploit the potential that the preparation of multimetallic LDH offers for the synthesis of mixed oxides with optimal compositions for an even more enhanced photocatalytic activity., Financial support by the Spanish Ministry of Science, Innovation and Universities (CEX-2021–001230-S, PID2021–0126071-OB-CO21 and PID2021–125907NB-I00 funded by MCIN/AEI/10.13039/501100011033/FEDER) and Generalitat Valenciana (Prometeo 2021–038, CIPROM-2022–60 and Advanced Materials Program MFA-2022–023 and MFA-2022–057 with funding from European Union Next Generation EU PRTR-C17.I1) are gratefully acknowledged. M. M. thanks the Universitat Politècnica de Valencia for a postgraduate scholarship. H. S. thanks the EU-funded Solar2Chem ITN project for a contract.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Defects and Disorder in Covalent Organic Frameworks for Advanced Applications

  • Daliran, Saba
  • Blanco, Matías
  • Dhakshinamoorthy, Amarajothi
  • Oveisi, Ali Reza
  • Alemán, José
  • García Gómez, Hermenegildo
Crystalline porous organic polymers (CPPs) or covalent organic frameworks (COFs), are composed by light elements linked by covalent bonds. Despite the remarkable progress attained, there are still bottlenecks limiting further development, some of them related to the presence of defects during their synthesis as well as in-depth understanding of structure of active centers and/or details of the reaction mechanism. Indeed, very often the proposed structures are far from reality because defects and disorders have not been considered. The present review provides an illustrative overview of “defects and disorder in COFs”. These defects include those not only generated during the synthesis and manipulation of COFs, but also lack of crystallinity, stacking disorder and network vacancies. The review starts giving general remarks on organic COFs and their synthetic methods, followed by different methods to play and manage defects, how to minimize them or how to take advantage of them to gain new properties and applications. Selected characterization techniques to quantify defective structures and active sites in COFs are also presented. Finally, the challenges and future opportunities in the field have been summarized in the last section., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). The University of Zabol is acknowledged for financial support (Grant numbers: IR-UOZ-GR-9381). A.D. is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). Authors also thank the Lorestan University for the grant support. Financial support was provided by the Spanish Government (PID2021-122299NB-I00, TED2021-130470B-I00, TED2021-129999B-C32), “Comunidad de Madrid”, European Structural Funds (S2018/NMT-4367), proyectos sinérgicos I+D (Y2020/NMT6469) and Comunidad Autónoma de Madrid (SI1/PJI/2019–00237)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biopolymer-derived structured graphitic carbons as metal-free heterogeneous ozonation catalysts in water

  • López-Francés, Antón
  • Peng, Lu
  • Bernat-Quesada, Francisco
  • Ferrer, Belén
  • Navalón, Sergio
  • Dhakshinamoorthy, Amarajothi
  • García Gómez, Hermenegildo
The development of metal-free heterogeneous catalysts for advanced oxidation processes is an important area of research, advancing in sustainability, with potential practical applications in water treatment. In this work, we report the development of defective structured graphitic carbons synthesized from biomass including alginate or chitosan polysaccharides and used as metal-free ozonation catalysts in water. These solids were characterized by several techniques, including powder X-ray diffraction, several spectroscopies (i.e. X-ray photoelectron, Raman or Fourier Transform infrared), elemental combustion analyses, thermogravimetric measurements, and electron microscopic techniques. The catalytic performance of graphitic carbon was examined in the ozonation reaction and the graphitic carbon derived from alginate (G) was found to be the most active catalyst by showing complete degradation in less than 4 h under the operational conditions as oxalic acid (50 mg L), catalyst (100 mg L), 20 °C, O dosage (140 mg h) at pH 3. Importantly, this solid retains its activity mostly upon reuse for more than 20 h, an observation that compares favorably with previous reports using graphene-based materials. In addition, activity of partially deactivated catalyst can be recovered by a pyrolysis process associated to the reconstitution of graphitic active sites of the catalyst. Experimental evidence by electron spin resonance together with specific (photo)catalytic experiments is provided to support the role of O as key intermediate during the oxalic acid degradation in water in the presence of G. This study exemplifies the activity of active graphitic-based solids from biomass precursors as ozonation heterogeneous catalysts in water in the absence of any metal., S.N. thanks the support received from Grant PID2021–123856OB-I00 funded by MICIU/AEI/10.13039/501100011033 and by ERDF A way of making Europe. A.D. is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). H.G. thanks the financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MICIU/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17. I1). Funding for open access charge: CRUE-Universitat Politècnica de València.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of surface terminal groups on the efficiency of two-electron oxygen reduction reaction catalyzed by iron single atoms on Ti3C2Tx (T = Cl, Br, NH) MXene

  • Kruger, Dawid Daniël
  • Delgado, Juan José
  • Recio, F. Javier
  • Goberna-Ferrón, Sara
  • Primo, Ana
  • García Gómez, Hermenegildo
Two TiC MXenes having single atom Fe were prepared from a TiAlC precursor by Al etching using an FeX (X = Cl, Br) Lewis acid as an etching reagent in NaCl/KCl molten salt. After removal of the excess Fe metal using concentrated aqueous HX solution, the resulting MXenes having Cl or Br surface terminations were concomitantly doped with single Fe atoms. A third sample was prepared from Fe(SA)-TiCBr by exchanging Br with -NH- using LiNH in molten salt. The presence of single atom Fe was determined by aberration corrected high-angle annular dark-field scanning transmission electron microscopy (AC-HAADF-STEM) with atomic resolution where isolated Fe atoms were observed. These Fe(SA)-TiCT materials exhibit electrocatalytic activity for the oxygen reduction reaction (ORR), with the selectivity to HO depending on the surface termination and the electrolyte pH. Involvement of Fe SA was inferred from the onset potential of the ORR and the Fe(iii)/Fe(ii) reduction potential and the change of the Tafel slope in this region. Under the best conditions, at pH 13, Fe(SA)-TiC(NH) exhibits for the ORR an average electron transfer number (n) of 2.5, which corresponds to an HO generation efficiency of 75%; these data compare well with those of the best Fe single-atom electrocatalysts., Financial support was provided by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S, PID2021-126071OB-C21\ and PID2021-123431OB-I00 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). The European Commission (ERC Adv., Grant Discovery) is also acknowledged. We thank the Advanced Microscopy Center of the University of Cadiz for granting instrument time.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Probing Defects in Covalent Organic Frameworks

  • Daliran, Saba
  • Oveisi, Ali Reza
  • Dhakshinamoorthy, Amarajothi
  • García Gómez, Hermenegildo
Defects in covalent organic frameworks (COFs) play a pivotal role in determining their properties and performance, significantly influencing interactions with adsorbates, guest molecules, and substrates as well as affecting charge carrier dynamics and light absorption characteristics. The present review focuses on the diverse array of techniques employed for characterizing and quantifying defects in COFs, addressing a critical need in the field of materials science. As will be discussed in this review, there are basically two types of defects referring either to missing organic moieties leaving free binding groups in the material or structural imperfections resulting in lower crystallinity, grain boundary defects, and incomplete stacking. The review summarizes an in-depth analysis of state-of-the-art characterization techniques, elucidating their specific strengths and limitations for each defect type. Key techniques examined in this review include powder X-ray diffraction (PXRD), infrared spectroscopy (IR), thermogravimetric analysis (TGA), nuclear magnetic resonance (NMR), X-ray photoelectron spectroscopy (XPS), scanning electron microscope (SEM), scanning transmission electron microscopy (STEM), scanning tunneling microscope (STM), high resolution transmission electron microcoe (HRTEM), gas adsorption, acid-base titration, advanced electron microscopy methods, and computational calculations. We critically assess the capability of each technique to provide qualitative and quantitative information about COF defects, offering insights into their complementary nature and potential for synergistic use. The last section summarizes the main concepts of the review and provides perspectives for future development to overcome the existing challenges., A.R.O. extend his acknowledgment to the University of Zabol (grant number: IR-UOZ-GR-9381) and Iran National Science Foundation (INSF) for providing funding under grant number 4025637. S.D. also thanks the support from the Lorestan University (LU). A.D. is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU). Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molten Salt Derived MXenes: Synthesis and Applications

  • Kruger, Dawid Daniël
  • García Gómez, Hermenegildo
  • Primo, Ana
About one decade after the first report on MXenes, these 2D early transition metal carbides or nitrides have become among the best-performing materials in electrode applications related to electrical energy storage devices and power-to-fuels conversion. MXenes are obtained by a top-down approach starting from the appropriate 3D MAX phase that undergoes etching of the A-site metal. Initial etching procedures are based on the use of concentrated HF or the in situ generation of this highly corrosive and poisonous reagent. Etching of the MAX phase is one of the major hurdles limiting the progress of the field. The present review summarizes an alternative, universal, and easily scalable etching procedure based on treating the MAX precursor with a Lewis acid molten salt. The review starts with presenting the current state of the art of the molten salt etching procedure to obtain or modify MXene, followed by a summary of the applications of these MXene samples. The aim of the review is to show the versatility and advantages of molten salt etching in terms of general applicability, control of the surface terminal groups, and uniform deposition of metal nanoparticles, among other features of the procedure., This work was financially support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metal-free carbon dot-microporous graphitic carbon heterojunctions as photocatalysts for CO2 reduction

  • García-Mulero, Ana
  • Cabrero-Antonino, María
  • García Gómez, Hermenegildo
  • Primo, Ana
A series of photocatalysts containing various loadings of carbon dots (CD) on microporous graphitic carbons (mpC) was prepared by pyrolysis at 900 °C under inert atmosphere of α-cyclodextrin containing preformed CDs. CDs were obtained by microwave hydrothermal conversion of citric acid and urea, and they were purified by centrifugation and partition between aqueous and organic solvents. The CD/mpC composites exhibit the expected morphology for mpC in TEM with particles of about 20 nm and microporous channels of 0.6 nm. XRD and Raman spectra of CD/mpC were also coincident with those of pristine mpC, but XPS and elemental analysis detected the presence of pyridinic N from the CDs. The optimal CD/mpC sample exhibits higher photocatalytic activity for the simultaneous H evolution and CO reduction to CH than the independent components or than a mechanical CD and mpC mixture reaching a productivity rate of 29 and 5 μmol g h for H and CH, respectively. CD/mpC photocatalysts were stable for four consecutive runs., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials program Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Opportunities of MXenes in Heterogeneous Catalysis: V2C as Aerobic Oxidation Catalyst

  • Dhakshinamoorthy, Amarajothi
  • Ramírez Grau, Rubén
  • García Gómez, Hermenegildo
  • Primo, Ana
MXenes are two-dimensional nanomaterials having alternating sheets of one atom-thick early transition metal layer and one atom-thick carbide or nitride layer. The external surface contains termination groups, whose nature depends on the etching agent used in the preparation procedure from the MAX phase. The present concept proposes that, due to their composition, the metal-surface termination groups make MXenes particularly suited as heterogeneous catalysts for some reactions. This proposal comes from the consideration that early transition metal atoms bonded to hydroxyl and oxo groups are a general type of active sites in heterogeneous catalysis and that similar catalytic centers can also be present in the MXene structure. After having presented the concept, we have selected VC Mxene as an example to illustrate its catalytic activity and to show how the catalytic performance varies when the surface groups are modified. As a test reaction, we selected the aerobic oxidation of indane to the corresponding indanol/indanone mixture using molecular oxygen as terminal oxidizing reagent. Two previously reported procedures to modify the surface groups, namely surface dehydroxylation by thermal treatment under diluted hydrogen flow and surface oxidation with ammonium persulfate to convert some surface groups into oxo groups were used, observing in both cases a decrease in the catalytic activity of VC. Based on this, V-OH are proposed as catalytic centers in this aerobic oxidation. Overall, the present concept shows the merits of MXenes in heterogeneous catalysis, based on their chemical composition and the surface functionality., Financial support by the Spanish Ministry of Science and Innovation (PDI-2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021-038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGeneration EU PRTR-C17.I1) is gratefully acknowledged. The Institute is a Center of Excellence Severo Ochoa (CEX-2021-001230-S). AD is beneficiary of a grant María Zambrano in Universitat Politècnica de València within the framework of the grants for the retraining in the Spanish university system (Spanish Ministry of Universities, financed by the European Union, NextGeneration EU).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

MXene dots as photocatalysts for CO2 hydrogenation

  • Ramírez Grau, Rubén
  • Cabrero-Antonino, María
  • García Gómez, Hermenegildo
  • Primo, Ana
Four MXene dots (MDs) (TiC, TiC, VC and NbC) have been prepared by laser ablation of the corresponding MAX phases in aqueous medium and subsequent separation by double centrifugation. These MDs were characterized by atomic force and transmission electron microscopy that show, respectively, thickness between 3 and 7.5 nm corresponding to few-layer nanoparticles and homogeneous lateral dimensions between 2.5 and 5 nm with high crystallinity. IR spectroscopy indicates that TiC and TiC contain OH as surface terminal groups, while XPS indicates the presence of O on the surface for the four samples. MDs present the most intense absorption band in the UV region with onset below 400 nm. These samples exhibit photocatalytic activity for CO hydrogenation to CO and methane, following the order TiC>NbC>TiC>VC. Isotopic label experiments confirm CO as the origin of the photo products. Most of the photoresponse derives from the UV photons, the photocatalytic activity increasing with the temperature in the range from 200 to 300 °C. These results show the possibility of tuning the composition, surface terminal groups, and other structural parameters of MXenes to produce semiconducting materials exhibiting important photocatalytic activity. Considering their versatility, flexible composition, and tunability, MXenes appear as promising 2D materials with intrinsic photoresponse to develop highly efficient photocatalysts., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials program Graphica MFA/2022/023 with funding from European Union Next Generation EU PRTR-C17. I1).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Supramolecular interaction of a molecular catalyst with a polymeric carbon nitride photoanode enhances photoelectrochemical activity and stability at neutral pH

  • Mondal, Sanjit
  • Salati, Martina
  • Nicaso, Marco
  • Albero, J.
  • Segado-Centellas, Mireia
  • Volokh, Michael
  • Bo, Carles
  • García Gómez, Hermenegildo
  • Gil-Sepulcre, Marcos
  • Llobet, Antoni
  • Shalom, Menny
Polymeric carbon nitride (CN) emerged as an alternative, metal-free photoanode material for water-splitting photoelectrochemical cells (PECs). However, the performance of CN photoanodes is limited due to the slow charge separation and water oxidation kinetics due to poor interaction with water oxidation catalysts (WOCs). Moreover, operation under benign, neutral pH conditions is rarely reported. Here, we design a porous CN photoanode connected to a highly active molecular Ru-based WOC, which also acts as an additional photo-absorber. We show that the strong interaction between the π-system of the heptazine units within the CN with the CH groups of the WOC's equatorial ligand enables a strong connection between them and an efficient electronic communication path. The optimized photoanode exhibits a photocurrent density of 180 ± 10 μA cm−2 at 1.23 V vs. the reversible hydrogen electrode (RHE) with 89% faradaic efficiency for oxygen evolution with turnover numbers (TONs) in the range of 3300 and a turnover frequency (TOF) of 0.4 s−1, low onset potential, extended incident photon to current conversion, and good stability up to 5 h. This study may lead to the integration of molecular catalysts and polymeric organic absorbers using supramolecular interactions., This project has received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement No. 849068). This work was also partially supported by the Israel Science Foundation (ISF), Grant No. 601/21. MS and MN acknowledge the Ministerio de Ciencia e Innovación (MICINN) for the grants PRE2020-093789 and PRE2020-093521, respectively. CB gratefully acknowledges MCINN/AEI/10.13039/501100011033 for projects PID2020-112806RB-I00 and CEX2019-000925-S, the ICIQ Foundation and the CERCA program of the Generalitat de Catalunya for funding. HG thanks MICINN (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/10.13039/501100011033), Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union Next Generation EU PRTR-C17.I1). JA thanks the MICINN for a Ramon y Cajal research associate contract (RYC2021–031006-I funded by MCIN/AEI/10.13039/501100011033 and by “European Union Next Generation EU/PRTR), and acknowledges the financial support (PID2022-141099OA-I00 funded by MCINN/AEI/10.13039/501100011033 and by “European Union Next Generation EU/PRTR). AL acknowledges MICINN through the project PID2022-140143OB-I00, Generalitat de Catalunya for the project 2017 SGR 1631 and Severo Ochoa (CEX2019-000925-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixed Fe-Mo carbide prepared by a sonochemical synthesis as highly efficient nitrate reduction electrocatalyst

  • Hu, Jiajun
  • Osella, Silvio
  • Arizono dos Reis, Eduardo
  • Brunca da Silva, Anelisse
  • Ribeiro, Caue
  • Mascaro, Lucia Helena
  • Albero, J.
  • García Gómez, Hermenegildo
Ammonia, a versatile compound that can be used as a fertilizer, chemical or fuel, has since long been produced through the energy-intensive Haber-Bosch process. Recently, the electrochemical nitrate reduction reaction (NO3RR) using electricity generated from renewable sources has attracted widespread attention. However, the complex reaction pathway of NO3RR leads to the formation of many undesirable by-products. Herein we successfully prepared a mixed (FeMo)2C catalyst with good electrocatalytic NO3RR, having a NH3 yield of 14.66 mg h-1 cm-2 and an FE of 94.35% at low potential -0.3 V vs RHE. DFT calculations show that the presence of Fe in Mo2C lattice changes the reaction mechanism, decreasing the potential barrier to be overcome from 1.36 to 0.89 eV. In addition, mixed Fe-Mo carbide facilitates the adsorption of intermediates and promotes NH3 desorption, facilitating NO3− reduction to NH3. In addition, (FeMo)2C was used as cathode for Zn-NO3 battery to generate electricity, producing ammonia at the same time, with a power density of 3.8 mWcm-2 and an NH3 FE of 88%. This work describes a new synthesis method for mixed metal carbides and provides a promising strategy for NH3 production., Financial support by the Spanish Ministry of Science and Innovation (CEX-2021-001230-S and PDI2021-0126071-OB-CO21 funded by MCIN/AEI/ 10.13039/501100011033) and Generalitat Valenciana (Prometeo 2021/038 and Advanced Materials programme Graphica MFA/2022/023 with funding from European Union NextGenerationEU PRTR-C17.I1). J.H. thanks the Chinese Scholarship Council for a postgraduate scholarship to perform his PhD at Valencia. J.A. thanks the Spanish Ministry of Science and Innovation for a Ramon y Cajal research associate contract (RYC2021–031006-I financed support by MCIN/AEI/10.13039/501100011033 and by European Union/NextGenerationEU/ PRTR), and Generalitat Valenciana financial support (CIGE 2022-093) financed by European Union-Next Generation EU, through the Conselleria de Innovación, Universidades, Ciencia y Sociedad Digital. S.O. thanks the National Science Centre, Poland (grant no. UMO/2020/39/I/ST4/01446) and the “Excellence Initiative – Research University” (IDUB) Program, Action I.3.3 – “Establishment of the Institute for Advanced Studies (IAS)” for funding (grant no. UW/IDUB/2020/25). The computation was carried out with the support of the Interdisciplinary Center for Mathematical and Computational Modeling at the University of Warsaw (ICM UW) under grants no. G83-28 and GB80-24., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanistic insights in acceptorless dehydrogenation of N-heterocycles using graphenes as carbocatalysts

  • Mollar-Cuni, Andrés
  • García-Aznar, Pablo
  • Martín, Santiago
  • Sastre, Germán
  • García Gómez, Hermenegildo
  • Mata, José A.
Catalytic dehydrogenation is a critical transformation in the chemical and energy sectors, particularly for reversible hydrogen storage systems. One of the most promising systems for hydrogen storage is the development of liquid organic hydrogen carriers (LOHCs), which have the potential capacity of storing and releasing hydrogen gas on demand. Catalytic direct dehydrogenation represents a greener, promising method to generate hydrogen in situ from these hydrogen-dense carriers. The catalytic activity of graphene materials as metal-free carbocatalysts in the acceptorless dehydrogenation of N-heterocycles has been explored. Herein, a detailed mechanistic investigation has been conducted through both experimental (stoichiometric and masking experiments) and DFT calculations on the reaction mechanism. The proposed mechanism identifies o-quinone groups as the active sites responsible for catalysis, involving the transformation of o-quinone groups into epoxide intermediates, which release molecular hydrogen and regenerate the o-quinone groups, completing the catalytic cycle. This work provides insight into the design of efficient metal-free catalysts for their use in LOHCs storage systems, paving the way for sustainable energy solutions., MICIU/AEI/FEDER (PID2021-126071OB-C22, PID2021-126071OB-C21 and PID2022-141433OB-I00), Universitat Jaume I (UJI-B2022-23), Generalitat Valenciana (MFA/2022/043, MFA/2022/023 and CIAPOS/2024/124). European Project SUPERVAL (Grant Agreement No. 101115456)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ligand decorated nickel-based nanoparticles supported onto MXenes in catalytic hydrogenation of N-heterocycles

  • Medina-Vargas, Judith
  • Martín, Santiago
  • Sorribes, Iván
  • García Gómez, Hermenegildo
  • Mata, José A.
The development of efficient first-row transition metal catalysts is essential for advancing sustainable chemical processes. In this study, we report the synthesis of nickel-based nanoparticles (NiNPs) functionalized with N-heterocyclic carbene ligands and immobilized onto Ti3C2 MXene. Our convergent synthetic approach enables comprehensive and straightforward characterization of each component within the final hybrid material. The NiNPs are obtained through chemical reduction of a well-defined nickel organometallic complex, resulting in the formation of small nickel metal nanoparticles (3.0 ± 0.8 nm) that are rapidly oxidized to the corresponding NiO and Ni(OH)2 based nanoparticles containing surface NHC ligands. The hybrid catalyst exhibits high activity and selectivity in the hydrogenation of N-heterocycles under hydrogenation conditions, achieving quantitative yields at low catalyst loadings, particularly notable for a nickel-based system. Recycling studies revealed progressive catalyst deactivation, primarily due to sintering of NiNPs, which reduces the number of active surface sites. However, the catalytic activity can be fully restored through a mild regeneration treatment under reducing conditions. These findings underscore the potential of NiNP/MXene-based materials for selective hydrogenation reactions, and highlight the importance of addressing key challenges in sustainability such as the use of non-noble metals, catalyst stability and recyclability. Further design modifications aimed at preventing nanoparticle sintering may enhance the long-term viability of these systems in catalytic hydrogenation processes., Thanks to the Spanish Ministry of Science and Innovation for financial support through the projects PID2021-126071OB-C21, PID2021-126071OB-C22 and CEX2023-001286-S, funded by MICIN/AEI/10.13039/501100011033/FEDER “Una manera de hacer Europa”. Generalitat Valenciana (MFA/2022/043) with funding from European Union NextGenerationEU and Universitat Jaume I (UJI-B2022-23 and GACUJIMB/2023/13) is also gratefully acknowledged. I. S. thanks the Grant CNS2022-136183 funded by MICIU/AEI/10.13039/501100011033 and by “European Union NextGenerationEU/PRTR”, and the Grant PID2022-143164OA-I00 funded by MICIU/AEI/10.13039/501100011033 and by “ERDF/EU”. I.S. also gratefully acknowledges the program ESGENT from Generalitat valenciana (CIESGT/2024/16). J. M.-V. thanks the program “Santiago Grisolia” (GrisoliaP2021/114). The authors thank ‘Servei Central d'Instrumentació Científica (SCIC) de la Universitat Jaume I′. S. M. is grateful to Gobierno de Aragón for the grant E31_23R with European Social Funds (Construyendo Europa desde Aragón)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mechanistic Insights in Acceptorless Dehydrogenation of N-Heterocycles Using Graphenes as Carbocatalysts

  • Mollar-Cuni, Andrés
  • García-Aznar, Pablo
  • Martín, Santiago
  • Sastre, German
  • García, Hermenegildo
  • Mata, Jose A.
Catalytic dehydrogenation is a critical transformation in the chemical and energy sectors, particularly for reversible hydrogen storage systems. One of the most promising systems for hydrogen storage is the development of liquid organic hydrogen carriers (LOHCs), which have the potential capacity of storing and releasing hydrogen gas on demand. Catalytic direct dehydrogenation represents a greener, promising method to generate hydrogen in situ from these hydrogen-dense carriers. The catalytic activity of graphene materials as metal-free carbocatalysts in the acceptorless dehydrogenation of N-heterocycles has been explored. Herein, a detailed mechanistic investigation has been conducted through both experimental (stoichiometric and masking experiments) and DFT calculations on the reaction mechanism. The proposed mechanism identifies o-quinone groups as the active sites responsible for catalysis, involving the transformation of o-quinone groups into epoxide intermediates, which release molecular hydrogen and regenerate the o-quinone groups, completing the catalytic cycle. This work provides insight into the design of efficient metal-free catalysts for their use in LOHCs storage systems, paving the way for sustainable energy solutions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Ligand decorated nickel-based nanoparticles supported onto MXenes in catalytic hydrogenation of N-heterocycles

  • Medina-Vargas, Judith
  • Martín, Santiago
  • Sorribes, Iván
  • García, Hermenegildo
  • Mata, José A.
The development of efficient first-row transition metal catalysts is essential for advancing sustainable chemical processes. In this study, we report the synthesis of nickel-based nanoparticles (NiNPs) functionalized with N-heterocyclic carbene ligands and immobilized onto Ti3C2 MXene. Our convergent synthetic approach enables comprehensive and straightforward characterization of each component within the final hybrid material. The NiNPs are obtained through chemical reduction of a well-defined nickel organometallic complex, resulting in the formation of small nickel metal nanoparticles (3.0 ± 0.8 nm) that are rapidly oxidized to the corresponding NiO and Ni(OH)2 based nanoparticles containing surface NHC ligands. The hybrid catalyst exhibits high activity and selectivity in the hydrogenation of N-heterocycles under hydrogenation conditions, achieving quantitative yields at low catalyst loadings, particularly notable for a nickel-based system. Recycling studies revealed progressive catalyst deactivation, primarily due to sintering of NiNPs, which reduces the number of active surface sites. However, the catalytic activity can be fully restored through a mild regeneration treatment under reducing conditions. These findings underscore the potential of NiNP/MXene-based materials for selective hydrogenation reactions, and highlight the importance of addressing key challenges in sustainability such as the use of non-noble metals, catalyst stability and recyclability. Further design modifications aimed at preventing nanoparticle sintering may enhance the long-term viability of these systems in catalytic hydrogenation processes.