Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanistic Insights in Acceptorless Dehydrogenation of N-Heterocycles Using Graphenes as Carbocatalysts

  • Mollar-Cuni, Andres
  • Martín, S
  • Mata, Jose A.
  • García-Aznar, Pablo|||0000-0003-0586-0037
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Catalytic dehydrogenation is a critical transformation in the chemical and energy sectors, particularly for reversible hydrogen storage systems. One of the most promising systems for hydrogen storage is the development of liquid organic hydrogen carriers (LOHCs), which have the potential capacity of storing and releasing hydrogen gas on demand. Catalytic direct dehydrogenation represents a greener, promising method to generate hydrogen in situ from these hydrogen-dense carriers. The catalytic activity of graphene materials as metal-free carbocatalysts in the acceptorless dehydrogenation of Nheterocycles has been explored. Herein, a detailed mechanistic investigation has been conducted through both experimental (stoichiometric and masking experiments) and DFT calculations on the reaction mechanism. The proposed mechanism identifies o-quinone groups as the active sites responsible for catalysis, involving the transformation of o-quinone groups into epoxide intermediates, which release molecular hydrogen and regenerate the o-quinone groups, completing the catalytic cycle. This work provides insight into the design of efficient metal-free catalysts for their use in LOHCs storage systems, paving the way for sustainable energy solutions, MICIU/AEI/FEDER (PID2021-126071OB-C22, PID2021-126071OB-C21 and PID2022-141433OB-I00), Universitat Jaume I (UJI-B2022-23), Generalitat Valenciana (MFA/2022/043, MFA/2022/023 and CIAPOS/2024/124). European Project SUPERVAL (Grant Agreement No. 101115456).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective adsorption of CO2 in TAMOF-1 for the separation of CO2/CH4 gas mixtures

  • Capelo-Avilés, Santiago
  • Fez-Febré, Mabel de
  • Balestra, Salvador R. G.
  • Cabezas-Giménez, Juanjo
  • Tomazini de Oliveira, Raiana
  • Gallo Stampino, Irene I.
  • Vidal-Ferran, Anton
  • González-Cobos, Jesús
  • Lillo, Vanesa
  • Fabelo, Oscar
  • Escudero-Adán, Eduardo C.
  • Falvello, Larry R.
  • Parra, José B.
  • Rumori, Paolo
  • Turnes Palomino, Gemma
  • Palomino Cabello, Carlos
  • Giancola, Stefano
  • Calero, Sofía
  • Galán-Mascarós, José Ramón
TAMOF-1 is a robust, highly porous metal–organic framework built from Cu2+ centers linked by a L-histidine derivative. Thanks to its high porosity and homochirality, TAMOF-1 has shown interesting molecular recognition properties, being able to resolve racemic mixtures of small organic molecules in gas and liquid phases. Now, we have discovered that TAMOF-1 also offers a competitive performance as solid adsorbent for CO2 physisorption, offering promising CO2 adsorption capacity ( > 3.8 mmol g–1) and CO2/CH4 Ideal Adsorbed Solution Theory (IAST) selectivity ( > 40) at ambient conditions. Moreover, the material exhibits favorable adsorption kinetics under dynamic conditions, demonstrating good stability in high-humidity environments and minimal degradation in strongly acidic media. We have identified the key interactions of CO2 within the TAMOF-1 framework by a combination of structural (neutron diffraction), spectroscopic and theoretical analyses which conclude a dual-site adsorption mechanism with the majority of adsorbed CO2 molecules occupying the empty voids in the TAMOF-1 channels without strong, directional supramolecular interactions. This very weak dominant binding opens the possibility of a low energy regeneration process for convenient CO2 purification. These features identify TAMOF-1 as a viable solid-state adsorbent for the realization of affordable biogas upgrading., The authors acknowledge the financial support from MCIN/AEI through projects PID2021-124796OB-I00, PID2021-124880NB-I00, PID2020-115658GB-I00, PDC2022-133214-I00; and from the Generalitat de Catalunya (SGR-2021-1154 and SGR-2021-01107). ICIQ is supported by the Ministerio de Ciencia e Innovación through the Severo Ochoa Excellence Accreditation CEX2021-001214-S; and by the CERCA Programme/Generalitat de Catalunya. This work was partially funded by the European Union’s Horizon Europe through the SUPERVAL project (The SUstainable Photo-ElectRochemical VALorization of flue gases), grant agreement no. 101115456. S.G.A. thanks AGAUR for a PhD industrial fellowship (2019 DI 73). S.R.G.B. thanks the Spanish Ministry of Science Innovation MCIN/AEI/10.13039/501100011033 (grants FJC2018-035697-I and RYC2022-036070-I), and the Consejería de Universidades, Investigación e Innovación, Junta de Andalucía (grant POSTDOC_21_00069). We also thank C3UPO (Centro de Cálculo Científico de la Universidad Pablo de Olavide) for providing high-performance computing facilities., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2021-001214-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrochemical transformation of copper sulfide electrodes for selective CO2-to-formate conversion

  • Fernández-Climent, Roser
  • Giusi, Daniele
  • Miceli, Matteo
  • Mesa, Camilo A.
  • Gutiérrez-Blanco, Ana
  • Li, Junnan
  • Redondo, Jesús
  • Schiller, Frederik
  • Barja, Sara
  • Celorrio, Veronica
  • Kornienko, Nikolay
  • Ampelli, Claudio
  • Giménez, Sixto
The data that support the findings of this study are available from the corresponding author upon reasonable request., Precise control over the dynamic transformations that electrocatalysts undergo under operating conditions offers a powerful strategy for tailoring catalytic selectivity. Herein, the electrochemical modification of Cu2−xS-derived catalysts to generate selective active sites for the electroreduction of CO2 to formate is investigated. Through a combination of in situ and ex situ characterization techniques, it is demonstrated that electrochemical cycling induces sulfur leaching, resulting in the formation of reduced, amorphous copper structures that exhibit enhanced selectivity toward formate production. Compared to the pristine material, the electrochemically modified catalyst achieves a twofold improvement in Faradaic efficiency, reaching values as high as 75% for CO2-to-formate conversion. These findings not only establish a cost-effective and scalable platform for catalyst fabrication and activation, but also open new avenues for advancing sustainable CO2 conversion technologies toward industrial implementation., The authors thank the support from the projects (RED2022-134508-T, PID2023-152771OB-I00, PID2023-149158OB-C44), funded by MICIU/AEI/10.13039/501100011033/, by “ERDF A way of making Europe.” S.B. and F.S. thank Basque Government (IT-1591-22). J.R. acknowledges the Czech Science Foundation and funding from PIF outgoing project number 22-18079O. The authors are also grateful to the Serveis Centrals d’Instrumentació Científica from the Universitat Jaume I (SCIC-UJI) for providing all the characterization facilities. D.G., M.M., and C.A. also acknowledge support from the H2020 Project SUPERVAL (ID: 101115456), funded by the European Union, and from the PRIN Project HYDREAM (ID: 2022YXHXH5ID), funded by the Italian MUR. The authors also thank Diamond light source for providing beamtime with experiment reference SP36993., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanistic insights in acceptorless dehydrogenation of N-heterocycles using graphenes as carbocatalysts

  • Mollar-Cuni, Andrés
  • García-Aznar, Pablo
  • Martín, Santiago
  • Sastre, Germán
  • García Gómez, Hermenegildo
  • Mata, José A.
Catalytic dehydrogenation is a critical transformation in the chemical and energy sectors, particularly for reversible hydrogen storage systems. One of the most promising systems for hydrogen storage is the development of liquid organic hydrogen carriers (LOHCs), which have the potential capacity of storing and releasing hydrogen gas on demand. Catalytic direct dehydrogenation represents a greener, promising method to generate hydrogen in situ from these hydrogen-dense carriers. The catalytic activity of graphene materials as metal-free carbocatalysts in the acceptorless dehydrogenation of N-heterocycles has been explored. Herein, a detailed mechanistic investigation has been conducted through both experimental (stoichiometric and masking experiments) and DFT calculations on the reaction mechanism. The proposed mechanism identifies o-quinone groups as the active sites responsible for catalysis, involving the transformation of o-quinone groups into epoxide intermediates, which release molecular hydrogen and regenerate the o-quinone groups, completing the catalytic cycle. This work provides insight into the design of efficient metal-free catalysts for their use in LOHCs storage systems, paving the way for sustainable energy solutions., MICIU/AEI/FEDER (PID2021-126071OB-C22, PID2021-126071OB-C21 and PID2022-141433OB-I00), Universitat Jaume I (UJI-B2022-23), Generalitat Valenciana (MFA/2022/043, MFA/2022/023 and CIAPOS/2024/124). European Project SUPERVAL (Grant Agreement No. 101115456)., Peer reviewed