Pasar al contenido principal

DISEÑO QUIMICO INTELIGENTE COMBINADO CON METODOLOGIAS DE NANOARQUITECTURA MOLECULAR PARA EL DESARROLLO DE DISPOSITIVOS TERMOELECTRICOS ORGANICOS

PID2022-141433OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Towards scalable high-performance molecular electronics devices based on diketopyrrolopyrrole derivatives

  • Bonastre, José María
  • Giglio, Maria Elisabetta
  • Mas-Torrent, Marta|||0000-0002-1586-005X
  • Davidson, Ross J.
  • Beeby, Andrew|||0000-0002-2134-4668
  • Cea, Pilar|||0000-0002-4729-9578
  • Crivillers, Núria|||0000-0001-6538-2482
  • Martin, Santiago|||0000-0001-9193-3874
Large-area molecular junctions offer a promising pathway toward the scalable implementation of molecular electronic devices, where charge transport is strongly governed by molecular structure and supramolecular organization. In this work, two diketopyrrolopyrrole (DPP) derivatives featuring tailored alkyl chain lengths designed to isolate the DPP moiety from the anchor groups, are used to form well-ordered Langmuir–Blodgett (LB) films. By bridging the gap between single-molecule behavior and collective transport in large-area devices, molecular junctions were first characterized using the ‘scanning tunneling microscopy (STM) touch-to-contact’ method. These junctions exhibit higher conductance than conventional single molecule I(s) measurements, attributed to intermolecular charge-transfer processes enabled by the ordered LB assemblies. Consistent with this enhanced conductance, low transition voltages (Vtrans) indicate favorable alignment between the metal electrode Fermi level and the frontier molecular orbitals. To assess device-relevant performance, large-area molecular junctions were fabricated using Eutectic Gallium–Indium (EGaIn) alloy as a soft top electrode. These junctions exhibit high yield and reproducibility, confirming the formation of robust and high-quality junctions that mirror the transport behavior observed at the single-molecule scale. Together, these results establish a consistent transport picture across both small- and large-area junctions identifying the DPP moiety as a highly effective molecular wire. This effectiveness stems from the capability of these DPP derivatives to form well-ordered films exhibiting intermolecular charge-transfer processes, which, combined with a favorable energy-level alignment with the electrodes, ultimately results in high device conductance.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Mechanistic Insights in Acceptorless Dehydrogenation of N-Heterocycles Using Graphenes as Carbocatalysts

  • Mollar-Cuni, Andres
  • Martín, S
  • Mata, Jose A.
  • García-Aznar, Pablo|||0000-0003-0586-0037
  • Sastre Navarro, German Ignacio|||0000-0003-0496-6331
  • García Gómez, Hermenegildo|||0000-0002-9664-493X
[EN] Catalytic dehydrogenation is a critical transformation in the chemical and energy sectors, particularly for reversible hydrogen storage systems. One of the most promising systems for hydrogen storage is the development of liquid organic hydrogen carriers (LOHCs), which have the potential capacity of storing and releasing hydrogen gas on demand. Catalytic direct dehydrogenation represents a greener, promising method to generate hydrogen in situ from these hydrogen-dense carriers. The catalytic activity of graphene materials as metal-free carbocatalysts in the acceptorless dehydrogenation of Nheterocycles has been explored. Herein, a detailed mechanistic investigation has been conducted through both experimental (stoichiometric and masking experiments) and DFT calculations on the reaction mechanism. The proposed mechanism identifies o-quinone groups as the active sites responsible for catalysis, involving the transformation of o-quinone groups into epoxide intermediates, which release molecular hydrogen and regenerate the o-quinone groups, completing the catalytic cycle. This work provides insight into the design of efficient metal-free catalysts for their use in LOHCs storage systems, paving the way for sustainable energy solutions, MICIU/AEI/FEDER (PID2021-126071OB-C22, PID2021-126071OB-C21 and PID2022-141433OB-I00), Universitat Jaume I (UJI-B2022-23), Generalitat Valenciana (MFA/2022/043, MFA/2022/023 and CIAPOS/2024/124). European Project SUPERVAL (Grant Agreement No. 101115456).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large area arrays of discrete single-molecule junctions derived from host-guest complexes

  • Escorihuela, Enrique
  • Barrio, Jesús del
  • Davidson, Ross J.
  • Beeby, Andrew
  • Low, Paul J.
  • Perez Murano, Francesc X.
  • Cea, Pilar
  • Martín, Santiago
The desire to continually reduce the lower limits of semiconductor integrated circuit (IC) fabrication methods continues to inspire interest in unimolecular electronics as a platform technology for the realization of future (opto)electronic devices. However, despite successes in developing methods for the construction and measurement of single-molecule and large-area molecular junctions, exercising control over the precise junction geometry remains a significant challenge. Here, host–guest complexes of the wire-like viologen derivative 1,1′-bis(4-(methylthio)-phenyl)-[4,4′-bipyridine]-1,1′-diium chloride ([1][Cl]2) and cucurbit[7]uril (CB[7]) have been self-assembled in a regular pattern over a gold substrate. Subsequently, ligandless gold nanoparticles (AuNPs) synthesized in situ are deposited over the host–guest array. The agreement between the conductance of individual mono-molecular junctions, appropriately chosen as a function of the AuNP diameter, within this array determined by conductive probe atomic force microscope (c-AFM) and true single-molecule measurements for a closely similar host–guest complex within a scanning tunneling microscope break-junction (STM-BJ) indicates the formation of molecular junctions derived from these host–guest complexes without deleterious intermolecular coupling effects., E. E. gratefully acknowledges the award of a DGA fellowship from the Government of Aragon. P. C. and S. M. are grateful for financial assistance in the framework of the projects PID2019-105881RB-I00, TED2021-131318B-I00, and PID2022-141433OB-I00 funded by MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR as well as Gobierno de Aragón through the grant E31_23R with European Social Funds (Construyendo Europa desde Aragón). J. D. B acknowledges grant RYC-2015-18471, funded by MCIN/AEI/10.13039/501100011033 and by “European Social Fund Investing in your future”; and the grant CTQ2017-84087-R supported by MCIN/AEI/10.13039/501100011033, and by “European Regional Development Fund a way of making Europe” by the European Union. R. J. D. and A. B. gratefully acknowledge the EPSRC grant EP/M029204/1. P. J. L. gratefully acknowledges support for work in the area of molecular electronics from the Australian Research Council Discovery Program (DP190100073, DP190100075 and DP220100790)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust large area molecular junctions based on transparent and flexible electrodes

  • García-Serrano, Aitor
  • Cea, Pilar
  • Osorio, Henrry M.
  • Perez Murano, Francesc X.
  • Rius, Gemma
  • Low, Paul J.
  • Martín, Santiago
Electrografting of an oligophenylene ethynylene monolayer (OPEH) onto a Mylar®-supported PEDOT : PSS and graphene substrate prior to wet-transfer of a graphene top-electrode has been used to create flexible and transparent large-area Mylar–PEDOT : PSS|OPEH|Graphene molecular junctions. The electrical conductance of the Mylar–PEDOT : PSS|OPEH|Graphene structure was determined by conductive probe atomic force microscopy (c-AFM), sampling various regions across the surfaces of multiple devices. All registered I–V curves (sampling size ∼150 tests) give a sigmoidal response, consistent with through molecule conductance and ruling out the presence of direct electrode contacts or short-circuits. The demonstration of the combined use of Mylar-supported PEDOT : PSS and graphene as alternative electrode materials to conventional metal thin film electrodes in large-area molecular junctions opens avenues to enable flexible and transparent molecular (opto)electronic devices., P. C. and S. M. acknowledge PID2019-105881RB-I00 (MCIN/AEI/10.13039/501100011033), PID2022-14143300B-I00 and TED2021-131318B-I00 grant funded by the MCIN/AEI/10.13039/501100011033 and “European Union NextGenerationEU/PRTR”. These authors also acknowledge DGA/Fondos FEDER (Construyendo Europa desde Aragón) for funding the research group Platón (E31-23R). H. M. O. is grateful for financial assistance from Escuela Politécnica Nacional in the framework of project PIGR-19-04. G. R. acknowledges her contract under the programme Ayudas Ramon y Cajal, Reference RYC-2016-21412. P. J. L. gratefully acknowledges support from the Australian Research Council (DP220100790)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Discarding metal incorporation in pyrazole macrocycles and the role of the substrate on single-layer assemblies

  • Lobo-Checa, Jorge
  • Rodríguez, Sindy Julieth
  • Hernández-López, Leyre
  • Herrer, Lucía
  • Passeggi Jr., Mario C. G.
  • Cea, Pilar
  • Serrano, José Luis
Pyrazole derivatives are key in crystal engineering and liquid crystal fields and thrive in agriculture, pharmaceutical, or biomedicine industries. Such versatility relies in their supramolecular bond adaptability when forming hydrogen bonds or metal-pyrazole complexes. Interestingly, the precise structure of pyrazole-based macrocycles forming widespread porous structures is still unsolved. We bring insight into such fundamental question by studying the self-assembled structures of a bis-pyrazole derivative sublimed in ultra-high-vacuum conditions (without solvents) onto the three (111) noble metal surfaces. By means of high-resolution scanning tunneling microscopy that is validated by gas phase density functional theory calculations, we find a common hexagonal nanoporous network condensed by triple hydrogen bonds at the molecule–metal interface. Such assembly is disrupted and divergent after annealing: (i) on copper, the molecular integrity is compromised leading to structural chaos, (ii) on silver, an incommensurate new oblique structure requiring molecular deprotonation is found and, (iii) on gold, metal–organic complexes are promoted yielding irregular chain structures. Our findings confirm the critical role of these metals on the different pyrazole nanoporous structure formation, discarding their preference for metal incorporation into the connecting nodes whenever there is no solvent involved., We gratefully acknowledge financial support from the Spanish Ministries of Economy, Industry and Competitiveness (MINECO, grants MAT2016-78293-C6-4-R and MAT2016-78293-C6-6) and of Science and Innovation (MICINN, grant PID2019-107338RBC64, PID2019-105881RB-I00, PID2021-122882NB-I00, PID2022-141433OB-I00 and PID2022_138750NB-C21/AEI/10.13039/501100011033 and RED2018-102833-T) including the Spanish Research Agency (AEI) and the European Regional Development Fund (ERDF), from the regional Governments of Aragon (E12_23R, E47_23R and E31_23R) and from the European Commission through the project ULTIMATE-I, grant ID 101007825. The present work used computational resources of the Pirayu cluster, acquired with funds from the Santa Fe Science, Technology and Innovation Agency (ASACTEI), Government of the Province of Santa Fe, through Project AC-00010-18, resolution no. 117/14., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring the impact of the HOMO-LUMO gap on molecular thermoelectric properties: A comparative study of conjugated aromatic, quinoidal, and donor-acceptor core systems

  • Blankevoort, Nickel
  • Bastante, Pablo
  • Davidson, Ross J.
  • Salthouse, Rebecca J.
  • Daaoub, Abdalghani
  • Cea, Pilar
  • Martín, Santiago
  • Batsanov, Andrei S.
  • Sangtarash, Sara
  • Bryce, Martin R.
  • Agrait, Nicolas
  • Sadeghi, Hatef
Thermoelectric materials have garnered significant interest for their potential to efficiently convert waste heat into electrical energy at room temperature without moving parts or harmful emissions. This study investigated the impact of the HOMO–LUMO (H-L) gap on the thermoelectric properties of three distinct classes of organic compounds: conjugated aromatics (isoindigos (IIGs)), quinoidal molecules (benzodipyrrolidones (BDPs)), and donor–acceptor systems (bis(pyrrol-2-yl)squaraines (BPSs)). These compounds were chosen for their structural simplicity and linear π-conjugated conductance paths, which promote high electrical conductance and minimize complications from quantum interference. Single-molecule thermoelectric measurements revealed that despite their low H-L gaps, the Seebeck coefficients of these compounds remain low. The alignment of the frontier orbitals relative to the Fermi energy was found to play a crucial role in determining the Seebeck coefficients, as exemplified by the BDP compounds. Theoretical calculations support these findings and suggest that anchor group selection could further enhance the thermoelectric behavior of these types of molecules., N.B. thanks the School of Engineering, University of Warwick, studentships for Ph.D. funding. H.S. acknowledges UKRI for Future Leaders Fellowship numbers MR/S015329/2 and MR/X015181/1. S.S. acknowledges Leverhulme Trust for Early Career Fellowship no. ECF-2018-375. P.C. and S.M. are grateful for financial assistance in the framework of the projects PID2022-141433OB-I00 and TED2021-131318B-I00 funded by MCIN/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR as well as Gobierno de Aragón through grant E31_23R with European Social Funds (Construyendo Europa desde Aragón). P.B. acknowledges financial support from Spanish MICINN ref PRE2019-091388. N.A. acknowledges funding by Spanish MICINN (grant PID2020-114880GB-I00 and “Maria de Maeztu” Programme for Units of Excellence in R&D CEX2018-000805-M). N.A., R.J.D., R.J.S., and M.R.B. acknowledge funding from EC H2020 FET Open project grant agreement number 767187 “QuIET”., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2018-000805-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of palladium-enriched metallic structures by direct focused He+ and Ne+ beam nanowriting from organometallic thin films: a comparison with Ga+ and e- beams

  • Herrer, Lucía
  • Salvador-Porroche, Alba
  • Hlawacek, Gregor
  • Cea, Pilar
  • Teresa, José María de
A direct nanowriting procedure using helium- and neon-focused ion beams and spin-coated organometallic thin films is introduced and applied to the fabrication of Pd-enriched metallic structures in a single lithography step. This process presents significant advantages over multi-step resist-based lithography and focused beam-induced deposition using gaseous precursors, such as its simplicity and speed, respectively. The optimized process leads to Pd-rich structures with low electrical resistivity values of 141 and 152 μΩ cm under Ne+ or He+ fluences of 1000 and 5000 μC cm−2, respectively. These resistivity values correlate well with compositional and microstructural studies, indicating a high Pd metallic content in a dense structure with a few-nm grain size. The obtained results are compared to similar structures fabricated by direct electron and gallium beam nanowriting, demonstrating the full potential of nanopatterned Pd-based organometallic thin films under the most common focused charged beams. The practical applications of combining spin-coated organometallic thin films with focused beam nanowriting in micro- and nano-lithography modern procedures are also discussed in this contribution., The authors are thankful for the financial support from the Gobierno de Aragón through the grant numbers E13_23R and E31_23R, for the financial support from the grants PID2020-11223914RB-I00, PID2022-141433OB-I00 PDC2023-145810-I00, PID2023-146451OB-I00, RED2022-134096-T and TED2021-131318B-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union “NextGenerationEU”/PRTR. This research work has also been funded by the European Commission – NextGenerationEU (Regulation EU 2020/2094), through CSIC's Quantum Technologies Platform (QTEP). The authors acknowledge the use of the facilities as well as the technical advice provided by the National Facility ELECMI ICTS, node “Laboratorio de Microscopias Avanzadas (LMA)” at “Universidad de Zaragoza”, and thefinancial support through a short-term scientific mission funded by the COST Action CA19140 – Focused Ion Technology for Nanomaterials, supported by COST (European Cooperation in Science and Technology) – https://www.fit4nano.eu/., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular templates on surfaces by exploiting supramolecular chemistry in langmuir–blodgett monolayers

  • Escorihuela, Enrique
  • Concellón, Alberto
  • Cardona, Teresa
  • Zuccheri, Giampaolo
  • Martín, Santiago
  • Serrano, José Luis
  • Cea, Pilar
Attaining precise control over molecular arrangements is of paramount importance for numerous applications in nanotechnology, particularly in constructing molecular templates to accurately immobilize target materials on surfaces. A strategic combination of supramolecular and interfacial chemistry may serve to build a well-organized molecular network, enabling the subsequent location of target molecules on specific positions of a surface. A supramolecular complex (compound 1) comprised of a melamine unit forming hydrogen bonds with dendritic arms terminated in a coumarin unit is utilized, which readily undergoes photodimerization. The research demonstrates the formation of well-organized Langmuir films of compound 1 which can be transferred on substrates at low surface pressures adopting a lying-flat orientation. Upon irradiation of the pristine films at 365 nm the coumarin units undergo photo-cross linking, leading to the formation of a compact photo-crosslinked film. Incubation of these photo-crosslinked films in a solution containing 1-hexanethiol results in the withdrawal of the melamine and the chemisorption of two thiol molecules per each melamine unit. The nanopores created by the removal of the melamine core are attributed to the disruption of hydrogen bonds in compound 1 by the thiols. This precisely defined molecular network holds significant promise as a template for orchestrating the arrangement of functional materials on surfaces., E.E., S.M., and P.C. thank PID2019-105881RB-I00 and PID2022-141433OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” as well as TED2021-131318B-I00 funded by MCIN/ AEI/10.13039/501100011033/ and Unión Europea NextGenerationEU/PRTR. J.L.S. and A.C. acknowledge PGC2018-097583-I00 and PID2021-122882NBI00 funded by MCIN/AEI/10.13039/501100011033/and by “ERDF A way of making Europe”. A.C. is grateful for grant RYC2021-031154-I funded by MICINN/AEI/FEDER/EU-NextGenerationEU. The authors also acknowledge Gobierno de Aragón–FEDER (Construyendo Europa desde Aragón) for funding the research groups Platón (E31_23R) and CLIP (E47_23R). E.E. thanks the award of a DGA fellowship from the Government of Aragon and the mobility funding for international research stays. G.Z. acknowledges funding through AlmaAttrezzature from the University of Bologna. The authors would like to acknowledge the use of the SAI (UNIZAR), CEQMA (UNIZAR–CSIC) Services, and Laboratorio de Microscopias Avanzadas-LMA (UNIZAR)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The conductance and thermopower behavior of pendent trans-coordinated palladium(II) complexes in single-molecule junctions

  • Bastante, Pablo
  • Davidson, Ross J.
  • Al Malki, Wafa
  • Salthouse, Rebecca J.
  • Cea, Pilar
  • Martín, Santiago
  • Batsanov, Andrei S.
  • Lambert, Colin J.
  • Bryce, Martin R.
  • Agrait, Nicolas
The present work provides insight into the effect of connectivity within isomeric 1,2-bis(2-pyridylethynyl)benzene (bpb) palladium complexes on their electron transmission properties within gold|single-molecule|gold junctions. The ligands 2,2'-((4,5-bis(hexyloxy)-1,2-phenylene)bis(ethyne-2,1-diyl))bis(4-(methylthio)pyridine) (Lm ) and 6,6'-((4,5-bis(hexyloxy)-1,2-phenylene)bis(ethyne-2,1-diyl))bis(3-(methylthio)pyridine) (Lp ) were synthesized and coordinated with PdCl2 to give the trans-Pd(Lm or p )Cl2 complexes. X-ray photoelectron spectroscopy (XPS) measurements shed light on the contacting modes of the molecules in the junctions. A combination of scanning tunneling microscopy-break junction (STM-BJ) measurements and density functional theory (DFT) calculations demonstrate that the typical lower conductance of meta- compared with para-connected isomers in a molecular junction was suppressed upon metal coordination. Simultaneously there was a modest increase in both conductance and Seebeck coefficient due to the contraction of the HOMO-LUMO gap upon metal coordination. It is shown that the low Seebeck coefficient is primarily a consequence of how the resonances shift relative to the Fermi energy., R.J.D., R.J.S., P.B., N.A., and M.R.B. acknowledge funding from EC H2020 FET Open project grant agreement number 767187 “QuIET”. P.C. and S.M. thank PID2022-141433OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” and TED2021-131318B-I00 funded by MCIN/EI/10.13039/501100011033/and Unión Europea NextGenerationEU/PRTR as well as Gobierno de Aragón-FEDER (Construyendo Europa desde Aragón) for funding the research groups Platón (E31_23R). C.J.L. acknowledges support from the EPSRC Programme Grant “QMol” EP/X026876/1. W.A.M. acknowledges support and computational guidance from Dr. Iain Grace. N.A. acknowledges funding from the Comunidad de Madrid NANOMAGCOST-CM (P2018/NMT-4321) and from the Spanish Ministry of Science and Innovation through grants PID2020-114880GB-I00 and the “María de Maeztu” Programme for Units of Excellence in R&D (CEX2018-000805-M). P.B. acknowledges financial support from Spanish MICINN ref PRE2019-091388., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2018-000805-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrical gating based on ion and electron beam irradiation of PdAc films: Application to superconducting nanowires

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Cea, Pilar
  • Teresa, José María de
Focused ion beam (FIB) is a nanopatterning technique commonly used for material removal, but in combination with a precursor material it gives rise to additive nanomanufacturing, of great interest in nanotechnology and semiconductor applications. The precursor material can be delivered onto the substrate either in the gas form, through a gas-injection system, or in thin-film form, through spin coating. Recently, it has been found that the electrical resistance of spin-coated PdAc organometallic films submitted to FIB irradiation can be metallic at an optimized ion dose, without the need of any post-processing purification step. On the other hand, if such PdAc films are submitted to low-dose focused electron beam irradiation (FEB), they become an insulating material. Here, we combine the use of FIB and FEB irradiation to produce (additively) micro- and nano-structured materials that act as gates in electronic devices. Three different gate configurations have been explored and applied to suppress superconductivity in metallic nanowires through electric-field effects, including lateral and top gating. This new fabrication technique for investigation of electrical gating effects at the micro- and nano-scales stands out by its precision and resolution (due to the use of focused charged beams), by the absence of sacrificial resist layers, and by the process speed., The authors thank the Gobierno de Aragón through the grant numbers E13_23R and E31_23R, the networks NANOLITO (RED2022-134096-T) and FIT4NANO (COST action CA19140), and the grants PID2020-11223914RB-I00, PID2023-146451OB-I00, PDC2023-145810-I00, PID2022-141433OB-I00, TED2021-131318B-I00 and Ayuda CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033 and European Union “NextGenerationEU”/PRTR. Authors acknowledge the use of the facilities as well as the technical advice provided by the National Facility ELECMI ICTS, node «Laboratorio de Microscopias Avanzadas (LMA)» at «Universidad de Zaragoza». This research work has been funded by the European Commission –NextGenerationEU (Regulation EU 2020/2094), through CSIC's Quantum Technologies Platform (QTEP)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Molecular electronics meets direct-write carbon nanofabrication via focused electron-beam-induced deposition (FEBID): A platform for junction architecture design

  • García-Serrano, Aitor
  • Sangtarash, Sara
  • González-Orive, Alejandro
  • Sadeghi, Hatef
  • Martín, Santiago
  • Herrer, Lucía
  • Nichols, Richard J.
  • Low, Paul J.
  • Lambert, Colin J.
  • Teresa, José María de
  • Sangiao, Soraya
  • Cea, Pilar
The electrical characteristics of a molecular junction are highly sensitive to the nature and uniformity of the molecule|electrode contacts. This gives rise to significant interest in the development of not only the active molecular structures that modulate charge transport and the anchor groups that contact them to the electrodes, but also methods for assembling uniform molecular monolayers on a substrate electrode and subsequent fabrication of a “top electrode” to achieve the reliable fabrication of viable molecular electronic devices. In this contribution, 4-(4-(4-(trimethylsilylethynyl)phenylethynyl)phenylethynyl)aniline was converted to the corresponding diazonium salt and electrografted onto highly oriented pyrolytic graphite (HOPG), resulting in an organized monolayer covalently bonded to the HOPG “substrate” electrode. Subsequently, focused electron-beam-induced deposition was used to form an amorphous carbon top electrode (C-FEBID) onto the monolayer from a naphthalene precursor. By guiding the raster scanning of the electron beam, the position, shape, and thickness of the carbon electrode “written” onto the monolayer can be controlled with nanometer precision. In addition, as a proof-of-principle demonstration of the construction of the interconnects necessary for integration of molecular devices, platinum was deposited precisely on top of the C-FEBID electrodes, using focused-ion-beam-induced deposition of PtMe3CpMe (CpMe = η5-C5H4Me) (Pt-FIBID). The HOPG|molecule|C-FEBID|Pt-FIBID “large area” junctions produced in this manner exhibited excellent reproducibility and were free of short circuits for top-electrode dimensions ranging from 4 × 4 to 8 × 8 μm2. The electrical characteristics of these devices were measured and modeled by using quantum chemical approaches. These results illustrate alternative routes toward the fabrication of planar 2D devices based on molecular monolayers and carbon electrodes., S.M. and P.C. acknowledge grant PID2022-141433OB-I00 funded by MICIU/AEI//10.13039/501100011033 and by FEDER, UE. S.M. and P.C. also gratefully acknowledge grant TED2021-131318B-I00 funded by MICIU/AEI/10.13039/501100011033 and UE NextGenerationEU/PRTR. J.M.D.T. and So.S. are grateful for financial assistance from Ministerio de Economía y Competitividad from Spain in the framework of projects, PID2023-146451OB-I00 and PDC2023-145810-I00, funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. Authors (S.M., J.M.D.T., So.S., and P.C) also acknowledge support from DGA and Fondos Feder for funding Platon (E31_23) and Nanomidas (E13_23R) research groups. S.M., J.M.D.T., So.S., and P.C. acknowledge financial support from the Spanish Ministry of Science and Innovation and the Spanish State Research Agency (AEI) through the Severo Ochoa Programme of Excellence for Research Units, with Grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033. P.J.L. gratefully acknowledges support from the Australian Research Council (DP220100790). R.J.N. thanks EPSRC for funding (grants EP/M029522/1, EP/M005046/1, and EP/K007785/1). C.J.L. and S.S. thank the EPSRC (grant nos. EP/M014452/1 and EP/N017188/1). H.S. acknowledges UKRI for Future Leaders Fellowships MR/S015329/2 and MR/X015181/1. S.S. acknowledges EPSRC New Investigator Grant APP17327. This work is supported by the UKRI Programme grant EP/X026876/1 “QMol”. Authors acknowledge Dr. César Magen for the EELS experiment and its interpretation. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza and the use of instrumentation as well as the technical advice provided by the National Facility ELECMI ICTS, node ≪Laboratorio de Microscopias Avanzadas (LMA)≫ at ≪Universidad de Zaragoza≫., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanistic insights in acceptorless dehydrogenation of N-heterocycles using graphenes as carbocatalysts

  • Mollar-Cuni, Andrés
  • García-Aznar, Pablo
  • Martín, Santiago
  • Sastre, Germán
  • García Gómez, Hermenegildo
  • Mata, José A.
Catalytic dehydrogenation is a critical transformation in the chemical and energy sectors, particularly for reversible hydrogen storage systems. One of the most promising systems for hydrogen storage is the development of liquid organic hydrogen carriers (LOHCs), which have the potential capacity of storing and releasing hydrogen gas on demand. Catalytic direct dehydrogenation represents a greener, promising method to generate hydrogen in situ from these hydrogen-dense carriers. The catalytic activity of graphene materials as metal-free carbocatalysts in the acceptorless dehydrogenation of N-heterocycles has been explored. Herein, a detailed mechanistic investigation has been conducted through both experimental (stoichiometric and masking experiments) and DFT calculations on the reaction mechanism. The proposed mechanism identifies o-quinone groups as the active sites responsible for catalysis, involving the transformation of o-quinone groups into epoxide intermediates, which release molecular hydrogen and regenerate the o-quinone groups, completing the catalytic cycle. This work provides insight into the design of efficient metal-free catalysts for their use in LOHCs storage systems, paving the way for sustainable energy solutions., MICIU/AEI/FEDER (PID2021-126071OB-C22, PID2021-126071OB-C21 and PID2022-141433OB-I00), Universitat Jaume I (UJI-B2022-23), Generalitat Valenciana (MFA/2022/043, MFA/2022/023 and CIAPOS/2024/124). European Project SUPERVAL (Grant Agreement No. 101115456)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-molecule and π–π-stacked dimer electron transport in carbazole and folded bicarbazole derivatives in molecular junctions

  • Alrehaili, Adel Amer
  • Davidson, Ross J.
  • Hurtado-Gallego, Juan
  • Alajmi, Asma
  • Alwhaibi, Noorah
  • Batsanov, Andrei S.
  • Martín, Santiago
  • Cea, Pilar
  • Bryce, Martin R.
  • Agrait, Nicolas
  • Ismael, Ali K.
  • Lambert, Colin J.
The present work provides insight into how the conformations of flexible molecules can impact their single-molecule conductance. Six thiol-substituted carbazole-based molecules are synthesized and characterized. In four, two carbazole groups are joined by a linking group (1,3-propane or meta-xylene) while the remaining two are model monocarbazoles. Using a combination of X-ray photoelectron spectroscopy (XPS), single-molecule conductance measurements, and density functional theory (DFT) calculations, we demonstrate that upon transitioning from a self-assembled monolayer (SAM) to a single-molecule junction, the intermolecular interactions give way to intramolecular interactions. This resulted in the flexible bicarbazole molecular wire switching conductance mechanisms, which occurred primarily via the covalent conjugated aromatic part of the molecule in the SAM to one including conductance via noncovalent π–π interactions in the single-molecule junction., This work is supported by the UKRI Programme grant EP/X026876/1 “QMol”. R.J.D., M.R.B., J.H.-G., and N.A. acknowledge funding from EC H2020 FET Open project grant agreement number 767187 “QuIET”. A.K.I. is grateful for the financial assistance from Tikrit University (Iraq) and the Iraqi Ministry of Higher Education (SL-20). A.A.A. is grateful for the financial assistance from Islamic University of Madinah (Saudi Arabia) and the Saudi Ministry of Education. A.A. is grateful to the Deanship of Scientific Research at Prince Sattam bin Abdulaziz University, Al-Kharj (KSA). P.C. and S.M. are grateful for the financial assistance in the framework of the project PID2022-141433OBI00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” as well as Gobierno de Aragón through the grant E31_23R with European Social Funds (Construyendo Europa desde Aragón) and from the Spanish Ministry of Science and Innovation and the Spanish State Research Agency (AEI) through the Severo Ochoa Programme of Excellence for Research Units, with Grant CEX2023-001286-S funded by MICIU/AEI/10.13039/501100011033. N.A. is supported by the Comunidad de Madrid NANOMAGCOST-CM (P2018/NMT-4321) and the Spanish Ministry of Science and Innovation through grants PID2020-114880GB-I00 and the “María de Maeztu” Program for Units of Excellence in R&D (CEX2018-000805-M)., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2018-000805-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancement of molecular conductance through a supramolecular five-molecule assembly

  • Escorihuela, Enrique
  • Regalado Aguilar, Mauricio
  • Mondal, Biswajit
  • Cuscó, Sara
  • Romero, Pilar
  • Davidson, Ross J.
  • Cea, Pilar
  • Benet-Buchholz, Jordi
  • Ruiz, Eliseo
  • Aragonès, Albert C.
  • Martín, Santiago
Achieving a comprehensive understanding and precise control of non-covalent interactions is crucial in molecular design and the development of functional molecular electronic devices, where supramolecular interactions enable the control of the local environment in molecular assemblies. Here, intermolecular interactions are used to create a complex supramolecular assembly by π stacking of 1,1′-bis(4-(methylthio)-phenyl)-[4,4′-bipyridine]-1,1′-diium chloride (1[Cl]2) and tetracyanoquinodimethane radical anion (TCNQ·−), whose crystal structure is determined by an electron diffraction technique, showing the presence of stacked 12+-2(TCNQ·−) units. This solid dissolves in aqueous solutions of cucurbit[8]uril (CB[8]), which acts as the host, to form a supramolecular five-molecule {12+-2(TCNQ·−)@2CB[8]} assembly. Its transport properties result in a significant enhancement of conductance. Theoretical studies confirm the stability of the supramolecular assembly and corroborate the enhancement in conductance. These results present a simple and effective method for stabilizing and enhancing charge transport efficiency through a combination of non-covalent and supramolecular interactions, with significant implications for the development of future (opto)electronic devices., E.E. gratefully acknowledges the award of a DGA fellowship from the government of Aragon and Campus Iberus e Erasmus-Programme, Universidad de Zaragoza; Fundación Bancaria Ibercaja; and Fundación CAI (CB 7/21) for international research stay cofunding. P.C. and S.M. are grateful for financial assistance in the framework of the project PID2022-141433OBI00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” as well as Gobierno de Aragón through grant E31_23R with European Social Funds (Construyendo Europa desde Aragón). P.R. acknowledges financial support from project PID2021-126132NB-I00 from MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe.” We received financial support from Ministerio de Ciencia, Innovación y Universidades (PID2024-155562NB-I00, TED2021-129593B-I00, and Maria de Maeztu CEX2021-001202-M). We also acknowledge the Generalitat de Catalunya for the 2021-SGR-00286 grant, E.R. for an ICREA Academia grant, B.M. for a Beatriu de Pinós grant, and A.C.A. as a Serra Hunter Fellow. A.C.A. is grateful for generous funding through the Max Planck Society. We are thankful for the use of computational resources from the CSUC and BSC supercomputer centers. The authors would like to acknowledge the use of the SAI (Unizar), CEQMA (UNIZAR-CSIC) Services, and Laboratorio de Microscopias Avanzadas (LMA, UNIZAR). The authors also thank Dr. Inés García for technical support in EPR studies, Dr. Andrea Vezzoli for technical support in the preliminary single-molecule conductance experiments, and Laura Ortiz for the electrospray mass spectra carried out in the CCiTUB. The ICIQ and J.B.-B., as those responsible for the electron diffractometer, thank the Ministerio de Ciencia e Innovación and the European Union NextGenerationEU for financing the Electron Diffractometer Synergy-ED with the project EQC2021-006956-P/AEI/10.13039/501100011033., With funding from the Spanish government through the "Unit of Excellence Maria de Maeztu" accreditation (CEX2021-001202-M)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental and theoretical studies of isomeric metal (N^C^N)Cl coordination complexes (metal = Pt, Pd) with multiple conductance pathways in single-molecule junctions

  • Bastante, Pablo
  • Davidson, Ross J.
  • Chelli, Yahia
  • Daaoub, Abdalghani
  • Cea, Pilar
  • Martín, Santiago
  • Batsanov, Andrei S.
  • Sangtarash, Sara
  • Sadeghi, Hatef
  • Bryce, Martin R.
  • Agrait, Nicolas
The present work provides insight into the effect of connectivity within isomeric 3,5-bis-(pyridin-2-yl)-phenyl (N^C^N) platinum and palladium complexes on their electron transmission properties within gold|molecule|gold junctions. The ligands 3,5-bis-(4-(methylthio)-pyridin-2-yl)-phenyl hexanoate (L m H) and 3,5-bis-(5-(methylthio)-pyridin-2-yl)-phenyl hexanoate (L p H) were synthesized and coordinated with either PtCl or PdCl to form complexes Pt m , Pt p , Pd m and Pd p . X-ray photoelectron spectroscopy (XPS) measurements evaluated the contacting modes of the molecules in the junctions. A combination of scanning tunneling microscopy-break junction (STM-BJ) measurements and density functional theory (DFT) calculations demonstrate that for the single-molecule S···S contacted junctions metal coordination enhanced the conductance compared with the free ligands. Notably, the higher degree of orbital mixing between the metal center and the ligand π-orbitals in the metal complexes plays a greater role than quantum interference to the extent that the complexes that incorporate ligands substituted with thiomethyl groups in meta positions relative to the pyridine-benzene linkages have a higher conductance than their para-analogs, e.g., Pt p -3.8 log-(G/G 0) and Pt m -3.3 log-(G/G 0), in contrast to the usual conductance trend (para > meta) for purely organic π-electron systems., R.J.D. and M.R.B. acknowledge funding from EC H2020 FET Open project grant agreement number 767187 “QuIET”. P.C. and S.M. thank PID2022-141433OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe” as well as Gobierno de Aragón–FEDER (Construyendo Europa desde Aragón) for funding the research groups Platón (E31_23R). H.S. acknowledges UKRI for Future Leaders Fellowships MR/S015329/2 and R/X015181/1. S.S. acknowledges EPSRC New Investigator Grant APP17327., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conductive cobalt-based deposits grown by Cryo-FEBID for application as top-contact electrodes in large-area molecular electronic devices

  • Salvador-Porroche, Alba
  • Gómez-González, Alejandro
  • Bonastre, José María
  • Martín, Santiago
  • Sangiao, Soraya
  • Teresa, José María de
  • Cea, Pilar
The growth of functional materials at precise locations using focused electron irradiation has recently attracted considerable attention, including techniques such as Focused Electron Beam Induced Deposition (FEBID), growth by decomposition of spin-coated organometallic films, ice lithography, and others. Ice lithography requires lowering the substrate temperature, which can be achieved by means of a cryogenic module or a Peltier accessory. The same approach is applied to FEBID growth under cryogenic conditions (Cryo-FEBID) and to the related technique Cryo-FIBID, where ions constitute the irradiating charge instead of electrons. These techniques outperform their corresponding room-temperature processes due to their higher speed. In this manuscript, we present the optimization of cobalt-based deposit growth using Cryo-FEBID. For the first time, a conductive material grown using Cryo-FEBID is demonstrated, opening the possibility of applying this technique to create nanoscale electrical contacts. These cobalt-based Cryo-FEBID deposits are used to fabricate the top-contact electrode in vertical, large-area molecular electronic devices, achieving state-of-the-art yield and performance. Importantly, this nanofabrication method offers unique advantages, including direct-writing with precise control over substrate location, size, shape and thickness, paving the way for the integration of molecular-scale functionalities into conventional microelectronic platforms., S.M. and P.C. acknowledge grant PID2022-141433OB-I00 funded by MICIU/AEI//10.13039/501100011033 and by FEDER, UE. S.M. and P.C. also gratefully acknowledge grant TED2021-131318B-I00 funded by MICIU/AEI /10.13039/501100011033 and UE NextGenerationEU/ PRTR. J.M.D.T. and S.S. are grateful for financial assistance from Ministerio de Economía y Competitividad from Spain in the framework of projects, PID2023-146451OB-I00 and PDC2023-145810-I00, funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. Authors (S.M., J.M.D.T., S.S., and P.C.) also acknowledge support from DGA and Fondos FEDER for funding Platon (E31_23) and Nanomidas (E13_23R) research groups. S.M., J.M.D.T., S.S., and P.C. acknowledge financial support from the Spanish Ministry of Science and Innovation and the Spanish State Research Agency (AEI) through the Severo Ochoa Programme of Excellence for Research Units, with Grant CEX2023e for Research Units, withAEI/10.13039/501100011033. A.G acknowledges the award of a DGA fellowship from the Government of Aragon. A.S.P. acknowledges funding received from project PIE202060E187 from the Spanish National Research Council (CSIC). J.M.B. acknowledges grant PID2019-105881RB-I00 and PhD Fellowship PRE2020-093409 funded by MCIU/AEI/10.13039/50110001133 and by FEDER, EU., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Large area arrays of discrete single-molecule junctions derived from host–guest complexes

  • Escorihuela, Enrique
  • Barrio, Jesús del
  • Davidson, Ross J.
  • Beeby, Andrew
  • Low, Paul J.
  • Prez-Murano, Francesc
  • Cea, Pilar
  • Martin, Santiago
The desire to continually reduce the lower limits of semiconductor integrated circuit (IC) fabrication methods continues to inspire interest in unimolecular electronics as a platform technology for the realization of future (opto)electronic devices. However, despite successes in developing methods for the construction and measurement of single-molecule and large-area molecular junctions, exercising control over the precise junction geometry remains a significant challenge. Here, host–guest complexes of the wire-like viologen derivative 1,1′-bis(4-(methylthio)-phenyl)-[4,4′-bipyridine]-1,1′-diium chloride ([1][Cl]2) and cucurbit[7]uril (CB[7]) have been self-assembled in a regular pattern over a gold substrate. Subsequently, ligandless gold nanoparticles (AuNPs) synthesized in situ are deposited over the host–guest array. The agreement between the conductance of individual mono-molecular junctions, appropriately chosen as a function of the AuNP diameter, within this array determined by conductive probe atomic force microscope (c-AFM) and true single-molecule measurements for a closely similar host–guest complex within a scanning tunneling microscope break-junction (STM-BJ) indicates the formation of molecular junctions derived from these host–guest complexes without deleterious intermolecular coupling effects.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Exploring the Impact of the HOMO–LUMO Gap on Molecular Thermoelectric Properties: A Comparative Study of Conjugated Aromatic, Quinoidal, and Donor–Acceptor Core Systems

  • Blankevoort, Nickel
  • Bastante, Pablo
  • Davidson, Ross J.
  • Salthouse, Rebecca J.
  • Daaoub, Abdalghani H. S.
  • Cea, Pilar
  • Martin Solans, Santiago
  • Batsanov, Andrei S.
  • Sangtarash, Sara
  • Bryce, Martin R.
  • Agrait, Nicolas
  • Sadeghi, Hatef
Thermoelectric materials have garnered significant interest for their potential to efficiently convert waste heat into electrical energy at room temperature without moving parts or harmful emissions. This study investigated the impact of the HOMO–LUMO (H-L) gap on the thermoelectric properties of three distinct classes of organic compounds: conjugated aromatics (isoindigos (IIGs)), quinoidal molecules (benzodipyrrolidones (BDPs)), and donor–acceptor systems (bis(pyrrol-2-yl)squaraines (BPSs)). These compounds were chosen for their structural simplicity and linear π-conjugated conductance paths, which promote high electrical conductance and minimize complications from quantum interference. Single-molecule thermoelectric measurements revealed that despite their low H-L gaps, the Seebeck coefficients of these compounds remain low. The alignment of the frontier orbitals relative to the Fermi energy was found to play a crucial role in determining the Seebeck coefficients, as exemplified by the BDP compounds. Theoretical calculations support these findings and suggest that anchor group selection could further enhance the thermoelectric behavior of these types of molecules.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Discarding metal incorporation in pyrazole macrocycles and the role of the substrate on single-layer assemblies

  • Lobo-Checa, Jorge
  • Rodríguez, Sindy Julieth
  • Hernández-López, Leyre
  • Herrer, Lucía
  • Passeggi, Mario C. G.
  • Cea, Pilar
  • Serrano, José Luis
Pyrazole derivatives are key in crystal engineering and liquid crystal fields and thrive in agriculture, pharmaceutical, or biomedicine industries. Such versatility relies in their supramolecular bond adaptability when forming hydrogen bonds or metal-pyrazole complexes. Interestingly, the precise structure of pyrazole-based macrocycles forming widespread porous structures is still unsolved. We bring insight into such fundamental question by studying the self-assembled structures of a bis-pyrazole derivative sublimed in ultra-high-vacuum conditions (without solvents) onto the three (111) noble metal surfaces. By means of high-resolution scanning tunneling microscopy that is validated by gas phase density functional theory calculations, we find a common hexagonal nanoporous network condensed by triple hydrogen bonds at the molecule–metal interface. Such assembly is disrupted and divergent after annealing: (i) on copper, the molecular integrity is compromised leading to structural chaos, (ii) on silver, an incommensurate new oblique structure requiring molecular deprotonation is found and, (iii) on gold, metal–organic complexes are promoted yielding irregular chain structures. Our findings confirm the critical role of these metals on the different pyrazole nanoporous structure formation, discarding their preference for metal incorporation into the connecting nodes whenever there is no solvent involved.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Molecular templates on surfaces by exploiting supramolecular chemistry in Langmuir–Blodgett monolayers

  • Escorihuela, Enrique
  • Concellón, Alberto
  • Cardona, Teresa
  • Zuccheri, Giampaolo
  • Martín, Santiago
  • Serrano, José L.
  • Cea, Pilar
Attaining precise control over molecular arrangements is of paramount importance for numerous applications in nanotechnology, particularly in constructing molecular templates to accurately immobilize target materials on surfaces. A strategic combination of supramolecular and interfacial chemistry may serve to build a well‐organized molecular network, enabling the subsequent location of target molecules on specific positions of a surface. A supramolecular complex (compound 1) comprised of a melamine unit forming hydrogen bonds with dendritic arms terminated in a coumarin unit is utilized, which readily undergoes photodimerization. The research demonstrates the formation of well‐organized Langmuir films of compound 1 which can be transferred on substrates at low surface pressures adopting a lying‐flat orientation. Upon irradiation of the pristine films at 365 nm the coumarin units undergo photo‐cross linking, leading to the formation of a compact photo‐crosslinked film. Incubation of these photo‐crosslinked films in a solution containing 1‐hexanethiol results in the withdrawal of the melamine and the chemisorption of two thiol molecules per each melamine unit. The nanopores created by the removal of the melamine core are attributed to the disruption of hydrogen bonds in compound 1 by the thiols. This precisely defined molecular network holds significant promise as a template for orchestrating the arrangement of functional materials on surfaces.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

The conductance and thermopower behavior of pendent trans-coordinated Palladium(II) complexes in cingle-molecule junctions

  • Bastante, Pablo
  • Davidson, Ross J.
  • Al Malki, Wafa
  • Salthouse, Rebecca J.
  • Cea, Pilar
  • Martin, Santiago
  • Batsanov, Andrei S.
  • Lambert, Colin J.
  • Bryce, Martin R.
  • Agrait, Nicolas
The present work provides insight into the effect of connectivity within isomeric 1,2-bis(2-pyridylethynyl)benzene (bpb) palladium complexes on their electron transmission properties within gold|single-molecule|gold junctions. The ligands 2,2′-((4,5-bis(hexyloxy)-1,2-phenylene)bis(ethyne-2,1-diyl))bis(4-(methylthio)pyridine) (Lm) and 6,6′-((4,5-bis(hexyloxy)-1,2-phenylene)bis(ethyne-2,1-diyl))bis(3-(methylthio)pyridine) (Lp) were synthesized and coordinated with PdCl2 to give the trans-Pd(Lm or p)Cl2 complexes. X-ray photoelectron spectroscopy (XPS) measurements shed light on the contacting modes of the molecules in the junctions. A combination of scanning tunneling microscopy–break junction (STM–BJ) measurements and density functional theory (DFT) calculations demonstrate that the typical lower conductance of meta- compared with para-connected isomers in a molecular junction was suppressed upon metal coordination. Simultaneously there was a modest increase in both conductance and Seebeck coefficient due to the contraction of the HOMO–LUMO gap upon metal coordination. It is shown that the low Seebeck coefficient is primarily a consequence of how the resonances shift relative to the Fermi energy
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fabrication of palladium-enriched metallic structures by direct focused He<sup>+</sup> and Ne<sup>+</sup> beam nanowriting from organometallic thin films: a comparison with Ga<sup>+</sup> and e<sup>-</sup> beams

  • Herrer, Lucía
  • Salvador-Porroche, Alba
  • Hlawacek, Gregor
  • Cea, Pilar
  • De Teresa, José María
A direct nanowriting procedure using helium- and neon-focused ion beams and spin-coated organometallic thin films is introduced and applied to the fabrication of Pd-enriched metallic structures in a single lithography step. This process presents significant advantages over multi-step resist-based lithography and focused beam-induced deposition using gaseous precursors, such as its simplicity and speed, respectively. The optimized process leads to Pd-rich structures with low electrical resistivity values of 141 and 152 μΩ cm under Ne+ or He+ fluences of 1000 and 5000 μC cm−2, respectively. These resistivity values correlate well with compositional and microstructural studies, indicating a high Pd metallic content in a dense structure with a few-nm grain size. The obtained results are compared to similar structures fabricated by direct electron and gallium beam nanowriting, demonstrating the full potential of nanopatterned Pd-based organometallic thin films under the most common focused charged beams. The practical applications of combining spin-coated organometallic thin films with focused beam nanowriting in micro- and nano-lithography modern procedures are also discussed in this contribution.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Electrical gating based on ion and electron beam irradiation of PdAc films: Application to superconducting nanowires

  • Salvador-Porroche, Alba
  • Herrer, Lucía
  • Sangiao, Soraya
  • Cea, Pilar
  • De Teresa, José María
Focused ion beam (FIB) is a nanopatterning technique commonly used for material removal, but in combination with a precursor material it gives rise to additive nanomanufacturing, of great interest in nanotechnology and semiconductor applications. The precursor material can be delivered onto the substrate either in the gas form, through a gas-injection system, or in thin-film form, through spin coating. Recently, it has been found that the electrical resistance of spin-coated PdAc organometallic films submitted to FIB irradiation can be metallic at an optimized ion dose, without the need of any post-processing purification step. On the other hand, if such PdAc films are submitted to low-dose focused electron beam irradiation (FEB), they become an insulating material. Here, we combine the use of FIB and FEB irradiation to produce (additively) micro- and nano-structured materials that act as gates in electronic devices. Three different gate configurations have been explored and applied to suppress superconductivity in metallic nanowires through electric-field effects, including lateral and top gating. This new fabrication technique for investigation of electrical gating effects at the micro- and nano-scales stands out by its precision and resolution (due to the use of focused charged beams), by the absence of sacrificial resist layers, and by the process speed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Molecular Electronics Meets Direct-Write Carbon Nanofabrication via Focused Electron-Beam-Induced Deposition (FEBID): A Platform for Junction Architecture Design

  • García-Serrano, Aitor
  • Sangtarash, Sara
  • González-Orive, Alejandro
  • Sadeghi, Hatef
  • Martín, Santiago
  • Herrer, Lucía
  • Nichols, Richard J.
  • Low, Paul J.
  • Lambert, Colin J.
  • de Teresa, José María
  • Sangiao, Soraya
  • Cea, Pilar
The electrical characteristics of a molecular junction are highly sensitive to the nature and uniformity of the molecule|electrode contacts. This gives rise to significant interest in the development of not only the active molecular structures that modulate charge transport and the anchor groups that contact them to the electrodes, but also methods for assembling uniform molecular monolayers on a substrate electrode and subsequent fabrication of a “top electrode” to achieve the reliable fabrication of viable molecular electronic devices. In this contribution, 4-(4-(4-(trimethylsilylethynyl)phenylethynyl)phenylethynyl)aniline was converted to the corresponding diazonium salt and electrografted onto highly oriented pyrolytic graphite (HOPG), resulting in an organized monolayer covalently bonded to the HOPG “substrate” electrode. Subsequently, focused electron-beam-induced deposition was used to form an amorphous carbon top electrode (C-FEBID) onto the monolayer from a naphthalene precursor. By guiding the raster scanning of the electron beam, the position, shape, and thickness of the carbon electrode “written” onto the monolayer can be controlled with nanometer precision. In addition, as a proof-of-principle demonstration of the construction of the interconnects necessary for integration of molecular devices, platinum was deposited precisely on top of the C-FEBID electrodes, using focused-ion-beam-induced deposition of PtMe3CpMe (CpMe = η5-C5H4Me) (Pt-FIBID). The HOPG|molecule|C-FEBID|Pt-FIBID “large area” junctions produced in this manner exhibited excellent reproducibility and were free of short circuits for top-electrode dimensions ranging from 4 × 4 to 8 × 8 μm2. The electrical characteristics of these devices were measured and modeled by using quantum chemical approaches. These results illustrate alternative routes toward the fabrication of planar 2D devices based on molecular monolayers and carbon electrodes.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Single-Molecule and π–π-Stacked Dimer Electron Transport in Carbazole and Folded Bicarbazole Derivatives in Molecular Junctions

  • Alrehaili, Adel Amer
  • Davidson, Ross J.
  • Hurtado-Gallego, Juan
  • Alajmi, Asma
  • Alwhaibi, Noorah
  • Batsanov, Andrei S.
  • Martin, Santiago
  • Cea, Pilar
  • Bryce, Martin R.
  • Agraït, Nicolás
  • Ismael, Ali K.
  • Lambert, Colin J.
The present work provides insight into how the conformations of flexible molecules can impact their single-molecule conductance. Six thiol-substituted carbazole-based molecules are synthesized and characterized. In four, two carbazole groups are joined by a linking group (1,3-propane or meta-xylene) while the remaining two are model monocarbazoles. Using a combination of X-ray hotoelectron spectroscopy (XPS), single-molecule conductance measurements, and density functional theory (DFT) calculations, we demonstrate that upon transitioning from a self-assembled monolayer (SAM) to a single-molecule junction, the intermolecular interactions give way to intramolecular interactions. This resulted in the flexible bicarbazole molecular wire switching conductance mechanisms, which occurred primarily via the covalent conjugated aromatic part of the molecule in the SAM to one including conductance via noncovalent π−π interactions in the single-molecule junction.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Mechanistic Insights in Acceptorless Dehydrogenation of N-Heterocycles Using Graphenes as Carbocatalysts

  • Mollar-Cuni, Andrés
  • García-Aznar, Pablo
  • Martín, Santiago
  • Sastre, German
  • García, Hermenegildo
  • Mata, Jose A.
Catalytic dehydrogenation is a critical transformation in the chemical and energy sectors, particularly for reversible hydrogen storage systems. One of the most promising systems for hydrogen storage is the development of liquid organic hydrogen carriers (LOHCs), which have the potential capacity of storing and releasing hydrogen gas on demand. Catalytic direct dehydrogenation represents a greener, promising method to generate hydrogen in situ from these hydrogen-dense carriers. The catalytic activity of graphene materials as metal-free carbocatalysts in the acceptorless dehydrogenation of N-heterocycles has been explored. Herein, a detailed mechanistic investigation has been conducted through both experimental (stoichiometric and masking experiments) and DFT calculations on the reaction mechanism. The proposed mechanism identifies o-quinone groups as the active sites responsible for catalysis, involving the transformation of o-quinone groups into epoxide intermediates, which release molecular hydrogen and regenerate the o-quinone groups, completing the catalytic cycle. This work provides insight into the design of efficient metal-free catalysts for their use in LOHCs storage systems, paving the way for sustainable energy solutions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Enhancement of molecular conductance through a supramolecular five-molecule assembly

  • Escorihuela, Enrique
  • Regalado Aguilar, Mauricio
  • Mondal, Biswajit
  • Cuscó, Sara
  • Romero, Pilar
  • Davidson, Ross J.
  • Cea, Pilar
  • Benet-Buchholz, Jordi
  • Ruiz, Eliseo
  • Aragonès, Albert C.
  • Martín, Santiago
Achieving a comprehensive understanding and precise control of non-covalent interactions is crucial in molecular design and the development of functional molecular electronic devices, where supramolecular interactions enable the control of the local environment in molecular assemblies. Here, intermolecular interactions are used to create a complex supramolecular assembly by π stacking of 1,1′-bis(4-(methylthio)-phenyl)-[4,4′-bipyridine]-1,1′-diium chloride (1[Cl]2) and tetracyanoquinodimethane radical anion (TCNQ·−), whose crystal structure is determined by an electron diffraction technique, showing the presence of stacked 12+-2(TCNQ·−) units. This solid dissolves in aqueous solutions of cucurbit[8]uril (CB[8]), which acts as the host, to form a supramolecular five-molecule {12+-2(TCNQ·−)@2CB[8]} assembly. Its transport properties result in a significant enhancement of conductance. Theoretical studies confirm the stability of the supramolecular assembly and corroborate the enhancement in conductance. These results present a simple and effective method for stabilizing and enhancing charge transport efficiency through a combination of non-covalent and supramolecular interactions, with significant implications for the development of future (opto)electronic devices.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Experimental and theoretical studies of isomeric metal (N^C^N)Cl coordination complexes (Metal = Pt, Pd) with multiple conductance pathways in single-molecule junctions

  • Bastante, Pablo
  • Davidson, Ross J.
  • Chelli, Yahia
  • Daaoub, Abdalghani H. S.
  • Cea, Pilar
  • Martin, Santiago
  • Batsanov, Andrei S.
  • Sangtarash, Sara
  • Sadeghi, Hatef
  • Bryce, Martin R.
  • Agrait, Nicolas
The present work provides insight into the effect of connectivity within isomeric 3,5-bis(pyridin-2-yl)phenyl (N^C^N) platinum and palladium complexes on their electron transmission properties within gold|molecule|gold junctions. The ligands 3,5-bis(4-(methylthio)pyridin-2-yl)phenyl hexanoate (LmH) and 3,5-bis(5-(methylthio)pyridin-2-yl)phenyl hexanoate (Lp H) were synthesized and coordinated with either PtCl or PdCl to form complexes Ptm, Ptp, Pdm and Pdp. X-ray photoelectron spectroscopy (XPS) measurements evaluated the contacting modes of the molecules in the junctions. A combination of scanning tunneling microscopy-break junction (STM-BJ) measurements and density functional theory (DFT) calculations demonstrate that for the single-molecule S···S contacted junctions metal coordination enhanced the conductance compared with the free ligands. Notably, the higher degree of orbital mixing between the metal center and the ligand π-orbitals in the metal complexes plays a greater role than quantum interference to the extent that the complexes that incorporate ligands substituted with thiomethyl groups in meta positions relative to the pyridine-benzene linkages have a higher conductance than their para-analogs, e.g., Ptp −3.8 log(G/G0) and Ptm −3.3 log(G/G0), in contrast to the usual conductance trend (para > meta) for purely organic π-electron systems.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Conductive cobalt-based deposits grown by Cryo-FEBID for application as top-contact electrodes in large-area molecular electronic devices

  • Salvador-Porroche, Alba
  • Gómez-González, Alejandro
  • Bonastre, José María
  • Martín, Santiago
  • Sangiao, Soraya
  • De Teresa, José María
  • Cea, Pilar
The growth of functional materials at precise locations using focused electron irradiation has recently attracted considerable attention, including techniques such as Focused Electron Beam Induced Deposition (FEBID), growth by decomposition of spin-coated organometallic films, ice lithography, and others. Ice lithography requires lowering the substrate temperature, which can be achieved by means of a cryogenic module or a Peltier accessory. The same approach is applied to FEBID growth under cryogenic conditions (Cryo-FEBID) and to the related technique Cryo-FIBID, where ions constitute the irradiating charge instead of electrons. These techniques outperform their corresponding room-temperature processes due to their higher speed. In this manuscript, we present the optimization of cobalt-based deposit growth using Cryo-FEBID. For the first time, a conductive material grown using Cryo-FEBID is demonstrated, opening the possibility of applying this technique to create nanoscale electrical contacts. These cobalt-based Cryo-FEBID deposits are used to fabricate the top-contact electrode in vertical, large-area molecular electronic devices, achieving state-of-the-art yield and performance. Importantly, this nanofabrication method offers unique advantages, including direct-writing with precise control over substrate location, size, shape and thickness, paving the way for the integration of molecular-scale functionalities into conventional microelectronic platforms.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Application of Ag-Enriched Nanostructures Through Ga+ Irradiation of Silver Butyrate Films in Surface-Enhanced Raman Spectroscopy (SERS)

  • Ocaña-Parral, Juan Ignacio
  • Herrer, Lucía
  • Tejedor, Inés
  • Salvador-Porroche, Alba
  • Barth, Sven
  • Cea, Pilar
  • Sangiao, Soraya
  • De Teresa, José María
Spin-coated films based on silver butyrate precursor solutions are submitted to focused Ga+ irradiation for the direct fabrication of Ag-enriched nanostructures. We report that, through the optimization of the solutions’ concentration, the spin-coating conditions, and the irradiation parameters, Ag-enriched patterned films with a tunable microstructure are obtained. In the case of a microstructure consisting of large and continuous Ag-enriched platelets, the patterned film is metallic, with resistivity down to 90 µΩ·cm. In the case of a microstructure consisting of small and discontinuous Ag-enriched nanoparticles, the corresponding patterned film is found to be suitable as a Surface-Enhanced Raman Spectroscopy (SERS) substrate. As proof of concept, the SERS signals produced by thiophenol solutions are measured and compared to a rough Ag film grown by sputtering, leading to a 200 times higher signal. Given the low Ga+ irradiation fluence required to produce tunable Ag nanostructures with metallic or SERS functionality, the obtained results highlight the potential of silver butyrate precursor solutions for the high-throughput printing of a nanomaterial with applications in nanoelectronics (metallic interconnects) and nanophotonics (SERS substrates).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Towards scalable high-performance molecular electronics devices based on diketopyrrolopyrrole derivatives

  • Bonastre, José María
  • Giglio, Maria Elisabetta
  • Mas-Torrent, Marta
  • Davidson, Ross J.
  • Beeby, Andrew
  • Cea, Pilar
  • Crivillers, Núria
  • Martin, Santiago
Large-area molecular junctions offer a promising pathway toward the scalable implementation of molecular electronic devices, where charge transport is strongly governed by molecular structure and supramolecular organization. In this work, two diketopyrrolopyrrole (DPP) derivatives featuring tailored alkyl chain lengths designed to isolate the DPP moiety from the anchor groups, are used to form well-ordered Langmuir–Blodgett (LB) films. By bridging the gap between single-molecule behavior and collective transport in large-area devices, molecular junctions were first characterized using the ‘scanning tunneling microscopy (STM) touch-to-contact’ method. These junctions exhibit higher conductance than conventional single molecule I(s) measurements, attributed to intermolecular charge-transfer processes enabled by the ordered LB assemblies. Consistent with this enhanced conductance, low transition voltages (Vtrans) indicate favorable alignment between the metal electrode Fermi level and the frontier molecular orbitals. To assess device-relevant performance, large-area molecular junctions were fabricated using Eutectic Gallium–Indium (EGaIn) alloy as a soft top electrode. These junctions exhibit high yield and reproducibility, confirming the formation of robust and high-quality junctions that mirror the transport behavior observed at the single-molecule scale. Together, these results establish a consistent transport picture across both small- and large-area junctions identifying the DPP moiety as a highly effective molecular wire. This effectiveness stems from the capability of these DPP derivatives to form well-ordered films exhibiting intermolecular charge-transfer processes, which, combined with a favorable energy-level alignment with the electrodes, ultimately results in high device conductance.