Pasar al contenido principal

INGENIERIA MOLECULAR DE SUPERFICIES PARA APLICACIONES ELECTRICAS Y APROVECHAMIENTO DE CALOR RESIDUAL

PRE2020-093409

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Formación
Convocatoria Contratos Predoctorales
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Towards scalable high-performance molecular electronics devices based on diketopyrrolopyrrole derivatives

  • Bonastre, José María
  • Giglio, Maria Elisabetta
  • Mas-Torrent, Marta|||0000-0002-1586-005X
  • Davidson, Ross J.
  • Beeby, Andrew|||0000-0002-2134-4668
  • Cea, Pilar|||0000-0002-4729-9578
  • Crivillers, Núria|||0000-0001-6538-2482
  • Martin, Santiago|||0000-0001-9193-3874
Large-area molecular junctions offer a promising pathway toward the scalable implementation of molecular electronic devices, where charge transport is strongly governed by molecular structure and supramolecular organization. In this work, two diketopyrrolopyrrole (DPP) derivatives featuring tailored alkyl chain lengths designed to isolate the DPP moiety from the anchor groups, are used to form well-ordered Langmuir–Blodgett (LB) films. By bridging the gap between single-molecule behavior and collective transport in large-area devices, molecular junctions were first characterized using the ‘scanning tunneling microscopy (STM) touch-to-contact’ method. These junctions exhibit higher conductance than conventional single molecule I(s) measurements, attributed to intermolecular charge-transfer processes enabled by the ordered LB assemblies. Consistent with this enhanced conductance, low transition voltages (Vtrans) indicate favorable alignment between the metal electrode Fermi level and the frontier molecular orbitals. To assess device-relevant performance, large-area molecular junctions were fabricated using Eutectic Gallium–Indium (EGaIn) alloy as a soft top electrode. These junctions exhibit high yield and reproducibility, confirming the formation of robust and high-quality junctions that mirror the transport behavior observed at the single-molecule scale. Together, these results establish a consistent transport picture across both small- and large-area junctions identifying the DPP moiety as a highly effective molecular wire. This effectiveness stems from the capability of these DPP derivatives to form well-ordered films exhibiting intermolecular charge-transfer processes, which, combined with a favorable energy-level alignment with the electrodes, ultimately results in high device conductance.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Towards the fabrication of molecular assemblies with optoelectronic properties

  • Bonastre, José María
  • Cea, Pilar
  • Martín, Santiago
Resumen del póster presentado a la XXXVIII Reunión Bienal de la Real Sociedad Española de Química, celebrada en el Palacio de Congresos de Granada, del 27 de junio al 30 de junio de 2022., Although technical improvements of electronic devices in the last decades have been remarkable, the empirical law that predicts this trend (Moore’s law) is beginning to fail. One of the alternatives to conventional silicon electronics attempting to meet society’s demands is molecular electronics, which studies the use of single molecules, or molecular assemblies as components in electronic circuits. In this approach, custom-made molecules with different structures are synthesized to perform as diodes, transistors, wires, switches... Working with molecules allows continuing downsizing devices and also exploring and applying the new phenomena that appear at the nanoscale. In this work, we describe the study of a compound containing a diketopyrrolopyrrole moiety (DPP), (Figure 1.A: Structure of the compound here studied), an electron acceptor, which bonded to donor groups forms donor-acceptor-donor complexes. Depending on the donor groups used, the resulting complex will have a specific band gap, and consequently, tunable optical properties. Moreover, these compounds exhibit a large tendency to form bidimensional aggregates, which results in highly ordered films. Once the compound was characterized in solution and at the air-water interphase, Langmuir-Blodgett (LB) and self-assembled films were prepared to study the structure of the transferred monolayers onto solid substrates. Formation of J-aggregates in the Langmuir-Blodgett films has been observed, with a distinctive shift of the DPP UV-vis peak to higher wavelengths (Figure 1.B: UV-vis spectrum in solution (red) and spectrum of a LB film (blue)). On the other hand, molecules in self-assembled films interacted differently, without forming J-aggregates. This result paves the way for the application of the obtained molecular assemblies by the LB method, with tunable optical properties, in optoelectronic devices., Authors acknowledge grant PID2019-105881RB-I00 funded by MCIN/AEI/ 10.13039/501100011033. J.M. B acknowledges Grant PRE2020-093409 funded by MCIN/AEI/ 10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Conductive cobalt-based deposits grown by Cryo-FEBID for application as top-contact electrodes in large-area molecular electronic devices

  • Salvador-Porroche, Alba
  • Gómez-González, Alejandro
  • Bonastre, José María
  • Martín, Santiago
  • Sangiao, Soraya
  • Teresa, José María de
  • Cea, Pilar
The growth of functional materials at precise locations using focused electron irradiation has recently attracted considerable attention, including techniques such as Focused Electron Beam Induced Deposition (FEBID), growth by decomposition of spin-coated organometallic films, ice lithography, and others. Ice lithography requires lowering the substrate temperature, which can be achieved by means of a cryogenic module or a Peltier accessory. The same approach is applied to FEBID growth under cryogenic conditions (Cryo-FEBID) and to the related technique Cryo-FIBID, where ions constitute the irradiating charge instead of electrons. These techniques outperform their corresponding room-temperature processes due to their higher speed. In this manuscript, we present the optimization of cobalt-based deposit growth using Cryo-FEBID. For the first time, a conductive material grown using Cryo-FEBID is demonstrated, opening the possibility of applying this technique to create nanoscale electrical contacts. These cobalt-based Cryo-FEBID deposits are used to fabricate the top-contact electrode in vertical, large-area molecular electronic devices, achieving state-of-the-art yield and performance. Importantly, this nanofabrication method offers unique advantages, including direct-writing with precise control over substrate location, size, shape and thickness, paving the way for the integration of molecular-scale functionalities into conventional microelectronic platforms., S.M. and P.C. acknowledge grant PID2022-141433OB-I00 funded by MICIU/AEI//10.13039/501100011033 and by FEDER, UE. S.M. and P.C. also gratefully acknowledge grant TED2021-131318B-I00 funded by MICIU/AEI /10.13039/501100011033 and UE NextGenerationEU/ PRTR. J.M.D.T. and S.S. are grateful for financial assistance from Ministerio de Economía y Competitividad from Spain in the framework of projects, PID2023-146451OB-I00 and PDC2023-145810-I00, funded by MCIN/AEI/10.13039/501100011033/FEDER, UE. Authors (S.M., J.M.D.T., S.S., and P.C.) also acknowledge support from DGA and Fondos FEDER for funding Platon (E31_23) and Nanomidas (E13_23R) research groups. S.M., J.M.D.T., S.S., and P.C. acknowledge financial support from the Spanish Ministry of Science and Innovation and the Spanish State Research Agency (AEI) through the Severo Ochoa Programme of Excellence for Research Units, with Grant CEX2023e for Research Units, withAEI/10.13039/501100011033. A.G acknowledges the award of a DGA fellowship from the Government of Aragon. A.S.P. acknowledges funding received from project PIE202060E187 from the Spanish National Research Council (CSIC). J.M.B. acknowledges grant PID2019-105881RB-I00 and PhD Fellowship PRE2020-093409 funded by MCIU/AEI/10.13039/50110001133 and by FEDER, EU., Peer reviewed