Pasar al contenido principal

DISPOSITIVOS BASADOS EN MATERIALES MOLECULARES: OPTIMIZACION DE SUS PRESTACIONES PARA APLICACIONES EN SENSORES E INTERRUPTORES

PID2022-141393OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Vertical Phase Separation in Blended Organic Semiconducting Films and Impact on Their Electrical and Direct X-Ray Detection Properties

  • Giglio, Maria Elisabetta
  • Colantoni, Elisabetta
  • Fratelli, Ilaria
  • Martinez Domingo, Carme|||0000-0002-1897-5362
  • Martinez Zaragoza, Pedro
  • Napolitano, Giulia
  • Campari, Enrico
  • Branchini, Paolo
  • Fraboni, Beatrice|||0000-0002-4875-3816
  • Basiricò, Laura|||0000-0002-0852-1770
  • Tortora, Luca
  • Mas-Torrent, Marta|||0000-0002-1586-005X
Blends of small-molecule organic semiconductors (OSCs) and insulating polymers in Organic Field-Effect Transistors (OFETs) are mainly used to assist the solution-processing of OSCs, but they can also reduce interfacial charge traps due to vertical phase separation. Such charge traps are known to affect both the electrical response and radiation-induced charge collection capability in these devices. This study aims to optimize vertical phase separation in blend films of 1,4,8,11-tetramethyl-6,13-triethylsilylethynyl pentacene (TMTES) and polystyrene (PS) to minimize charge trap density at the semiconductor/dielectric interface, thereby enhancing the electrical performance and direct X-ray detection sensitivity in OFETs. A PS mass concentration of 33% is identified as optimal for achieving high-quality phase separation and favorable film morphology. This formulation led to films with reduced interfacial hole trap density and improved electrical and detection capacity, demonstrating a hole field-effect mobility of (1.3 ± 0.4) cmV s and X-ray sensitivity of (5.6 ± 0.2) × 10 µC Gy cm at low applied voltages. Remarkably, the molecular weight of PS does not significantly impact vertical phase separation, thin film morphology, or electrical properties. These findings are crucial for the development of high-performance OFETs and their application as X-ray detectors.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Solution-Processed Thin Film of a Novel Organic Charge-Transfer Complex for Near-Infrared Detection in Field-Effect Transistors

  • Giglio, Maria Elisabetta
  • Salzillo, Tommaso|||0000-0002-9737-2809
  • Kos, Dean
  • Martinez Domingo, Carme|||0000-0002-1897-5362
  • Riera Galindo, Sergi
  • Asensi, Jose Miguel
  • D'Agostino, Simone|||0000-0003-3065-5860
  • Venuti, Elisabetta|||0000-0003-3493-7953
  • Mas-Torrent, Marta|||0000-0002-1586-005X
Charge-transfer complexes (CTCs) have garnered considerable attention owing to their tunable electronic properties, which arise from the unique interactions between electron donor and acceptor molecules. However, reported fabrication methods remain largely restricted to single crystals produced via drop-casting and coevaporation or thin films prepared by cosublimation, thereby limiting their practical applicability. In this work, we successfully synthesized cocrystals of (Ph-BTBT-C)(FTCNQ) with a charge transfer degree (ρ) of 0.19. More importantly, we demonstrated the deposition of these cocrystals as thin films in organic field-effect transistors (OFETs) using a low-cost, rapid, and scalable solution-shearing technique compatible with large-area fabrication. The resulting CTC thin films exhibited n-type semiconducting behavior and showed a pronounced response to infrared light at 1050 nm. The combination of a single-component active layer whose near-infrared (NIR) absorption band can be chemically tuned through donor-acceptor engineering with a scalable solution-based processing method highlights the promise of CTC-based OFETs for advanced IR detection and sensing applications. These results open new perspectives for the technological exploitation of CTCs, a class of materials long studied but rarely integrated into practical devices.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Towards scalable high-performance molecular electronics devices based on diketopyrrolopyrrole derivatives

  • Bonastre, José María
  • Giglio, Maria Elisabetta
  • Mas-Torrent, Marta|||0000-0002-1586-005X
  • Davidson, Ross J.
  • Beeby, Andrew|||0000-0002-2134-4668
  • Cea, Pilar|||0000-0002-4729-9578
  • Crivillers, Núria|||0000-0001-6538-2482
  • Martin, Santiago|||0000-0001-9193-3874
Large-area molecular junctions offer a promising pathway toward the scalable implementation of molecular electronic devices, where charge transport is strongly governed by molecular structure and supramolecular organization. In this work, two diketopyrrolopyrrole (DPP) derivatives featuring tailored alkyl chain lengths designed to isolate the DPP moiety from the anchor groups, are used to form well-ordered Langmuir–Blodgett (LB) films. By bridging the gap between single-molecule behavior and collective transport in large-area devices, molecular junctions were first characterized using the ‘scanning tunneling microscopy (STM) touch-to-contact’ method. These junctions exhibit higher conductance than conventional single molecule I(s) measurements, attributed to intermolecular charge-transfer processes enabled by the ordered LB assemblies. Consistent with this enhanced conductance, low transition voltages (Vtrans) indicate favorable alignment between the metal electrode Fermi level and the frontier molecular orbitals. To assess device-relevant performance, large-area molecular junctions were fabricated using Eutectic Gallium–Indium (EGaIn) alloy as a soft top electrode. These junctions exhibit high yield and reproducibility, confirming the formation of robust and high-quality junctions that mirror the transport behavior observed at the single-molecule scale. Together, these results establish a consistent transport picture across both small- and large-area junctions identifying the DPP moiety as a highly effective molecular wire. This effectiveness stems from the capability of these DPP derivatives to form well-ordered films exhibiting intermolecular charge-transfer processes, which, combined with a favorable energy-level alignment with the electrodes, ultimately results in high device conductance.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fluorescent Switchable Surfaces Based on Quantum Dots Modified With Redox-Active Molecules

  • Campos Lendínez, Ángel
  • Muñoz Martín, José M.
  • Crivillers, Núria
  • Mas Torrent, Marta
By combining the switching ability of redox molecules with the unique fluorescence properties of quantum dots (QDs), a robust electrochemical fluorescence switch is developed here. This is realized by grafting CdSe/ZnS QDs on transparent indium tin oxide (ITO) substrates and, subsequently, modifying them with a Ferrocene (Fc) molecular monolayer. The application of oxidation/reduction voltage pulses to tune the Fc redox state leads to the tuning of the surface fluorescence output. Interestingly, the ON/OF ratio can be enhanced by reducing the distance between the redox active unit and the QD due to a more efficient electronic coupling. Remarkably, by defining a mixed-valence state, a ternary switch has also been achieved. It is highlighted that the QD surface immobilization is key to realize this switch to avoid aggregation and fluorescence quenching in suspension. Hence, an efficient and versatile novel route to fabricate robust fluorescent redox switches is demonstrated, opening a wide avenue of possibilities to be explored in the field of sensing and information storage., This work was funded by MCIN/AEI/10.13039/501100011033/ERDF,UE with projects GENESIS PID2019-111682RB-I00 and SENSATION PID2022-141393OB-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S) and the Generalitat de Catalunya (2021-SGR-00443). Á.C.-L. is enrolled in the UAB Materials Science Ph.D.program. The authors acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High Polymer Molecular Weight Yields Solar Cells with Simultaneously Improved Performance and Thermal Stability

  • Riera Galindo, Sergi
  • Sanz Lleó, Marta
  • Gutiérrez Fernández, Edgar
  • Ramos, Nicolás
  • Mas Torrent, Marta
  • Martín, Jaime
  • López Mir, Laura
  • Campoy Quiles, Mariano
Simple synthetic routes, high active layer thickness tolerance as well as stable organic solar cells are relentlessly pursued as key enabling traits for the upscaling of organic photovoltaics. Here, the potential to address these issues by tuning donor polymer molecular weight is investigated. Specifically, the focus is on PTQ10, a polymer with low synthetic complexity, with number average molecular weights of 2.4, 6.2, 16.8, 52.9, and 54.4 kDa, in combination with three different non-fullerene acceptors, namely Y6, Y12, and IDIC. Molecular weight, indeed, unlocks a threefold increase in power conversion efficiency for these blends. Importantly, efficiencies above 10% for blade coated devices with thicknesses between 200 and 350 nm for blends incorporating high molecular weight donor are shown. Spectroscopic, GIWAXS and charge carrier mobility data suggest that the strong photocurrent improvement with molecular weight is related to both, improved electronic transport and polymer contribution to exciton generation. Moreover, it is demonstrated that solar cells based on high molecular weight PTQ10 are more thermally stable due to a higher glass transition temperature, thus also improving device stability., The authors are grateful to 1-Material for providing custom molecular weight PTQ10 polymer and for the fruitful discussions. S.R.-G. is thankful to the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2020) for grant agreement No. 101025608, IDEAL; for the financial support provided by Ajuntament de Barcelona and the Ministeri de Ciència i Innovació within the framework of Barcelona Capital Cultural i Científic, through the project Bus Stop Integrated Organic Photovoltaic (TERRA) (22S09542-001). The authors acknowledge Dr. Bernhard Dörling for building the electronic controller of the accelerated blade coater and Dr. M. Gibert-Roca for designing the corresponding multiplexor. M.C.-Q. thanks to the Spanish Ministry of Science and Innovation for funding through projects PID2021-128924OB-I00 and TED2021-131911B-I00. This work was supported by the MADRAS project funded from the European Union Horizon 2020 research and innovation programme under grant agreement No. 862492. .This work was also funded by MCIN/AEI/10.13039/501100011033/ERDF,UE with projects GENESIS PID2019-111682RB-I00 and SENSATION PID2022-141393OB-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Probing molecular arrangements of the organic semiconductor 2,7-Dioctyl[1]benzothieno[3,2- b][1]benzothiophene thin film at the interface by UV Resonant Raman scattering

  • Salzillo, Tommaso
  • Li, Jinghai
  • Pfattner, Raphael
  • Venuti, Elisabetta
  • Mas Torrent, Marta
  • D'Amico, Francesco
Raman spectroscopy was employed to investigate nanometric thick films of the organic semiconductor 2,7-Dioctyl[1]benzothieno[3,2-b][1]benzothiophene, following a comprehensive vibrational characterization of the compound condensed phases at various excitation wavelengths. UV Raman excitation enabled the characterization of the thin films, revealing that the molecular orientation at the film/air interface is characterized by a different organization and/or a high degree of disorder compared to the bulk phase. The low penetration depth of the UV Raman excitation allows for the retrieval of this information, unlike the XRD data., T.S. thanks the Programma per Giovani Ricercatori “Rita Levi Montalcini” year 2020 (grant PGR20QN52R) of the Italian Ministry of University and Research (MUR) for the financial support. T. S. and F. D. acknowledge CERIC-ERIC for providing access to the Elettra IUVS-OFF beamline (beamtime number 20187028). J. L., R. P. and M. M-T. also a acknowledge. funding from MCIN/AEI/10.13039/501100011033/ERDF,UE with projects GENESIS PID2019–111682RB-I00 and SENSATION PID2022–141393OB-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURECEX2019–000917-S) and the Generalitat de Catalunya (2021-SGR-00443). R.P. acknowledges support from the Ramón y Cajal Fellowship (Ref. RyC2019–028474-I). This work has been supported by the project ”POLYPHON - Polymorph screening to enable electron-phonon coupling engineering in organic semiconductors” funded by the MUR Progetti di Ricerca di Rilevante Interesse Nazionale (PRIN) Bando 2022 - grant 2022XZ2ZM8., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Redox-Active Au Nanoparticles Self-Assembled at Liquid-Liquid Interface via C-Au Functionalization for Dye Degradation Electrocatalysis

  • Catalán Toledo, José
  • Djafari, Jamila
  • Mas Torrent, Marta
  • Crivillers, Núria
This work presents the synthesis of poly(vinylpyrrolidone)-stabilized gold nanoparticles (Au NPs) and their subsequent functionalization with molecules bearing terminal alkynes. The ligand exchange occurs at the liquid-liquid interface (LLI), resulting in the formation of Au NPs stabilized through the covalent C-Au functionalization. Simultaneously, structured composite films are formed, driven by the self-assembly of the Au NPs supported by the polymer. A comparative analysis involving three distinct alkyne-terminated derivatives reveals that film formation is favored when the ligand includes an aromatic unit such as in a ferrocenyl-stilbene derivative. The LLI films can be easily transferred to solid a support for their characterization. Additionally, it is demonstrated that these films serve as a potential electrocatalytic platform. As a proof of concept, we demonstrate that the electrochemically active ferrocene-based Au NPs films can efficiently remove methylene blue via an electro-Fenton-like reaction, surpassing the efficiency of the non-redox phenylacetylene Au NP films., The authors thank Dr. J. A. De Sousa for his help with the technical aspects of the synthesis. Dr. T. Jawhari for the Raman spectroscopy measurements (CCiT-UB), Prof. Dr. I. Moreno-Villoslada for discussing the results, and Dr. F. Minges for providing the academic license of the Spectragryph software for spectroscopy data processing and the electron microscopy service at the ICMAB-CSIC and ICN2. This work was funded by the Spanish Ministry (MCIN/AEI/10.13039/501100011033/ERDF, UE) with projects GENESIS PID2019-111682RB-I00 and SENSATION PID2022-141393OB-I0, the “Severo Ochoa” Programme for Centres of Excellence in R&D (FUNFUTURE CEX2019-000917-S), the ERASAM project (TED2021-132550B–C22) and the Generalitat de Catalunya (2021-SGR-00443). This research is part of the CSIC program within the Interdisciplinary Thematic Platform on Quantum Technologies (PTI QTEP+) for the Spanish Recovery, Transformation, and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094. J.C.-T. thanks the DOC-FAM Fellowship, grant agreement no. 754397 through H2020-MSCA-COFUND-2016. The authors acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). J.C.-T. is enrolled in the UAB Materials Science Ph.D. program., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Interrogating the CISS effect in chiral and paramagnetic organic radicals: the impact of the molecular spin over the total spin polarization

  • Sousa, J. Alejandro de
  • Mayorga-Burrezo, Paula
  • Míguez Lago, Sandra
  • Catalán Toledo, José
  • Ramos Tomás, Raúl
  • Ortuño, Ana
  • Zotti, Linda A.
  • Palacios, Juan José
  • Campaña, Araceli G.
  • Veciana, Jaume
  • Crivillers, Núria
Continuous research on new chiral molecular materials brings new exciting properties to the field of molecular electronics. The discovery of the chirality-induced spin selectivity (CISS) effect has expanded the list of applications for chiral structures, opening promising avenues for their exploitation in molecular spintronics. In this work, the persistent propeller-like organic perchlorotriphenylmethyl (PTM) radical is investigated as a potential spin filter combining chirality and paramagnetism. In particular, two different PTM derivatives, mono- and bis-functionalized, with one or two terminal alkyne groups have been used for the preparation of enantioenriched solid-state assemblies. The analysis of their chiroptical properties reveals that the functionalization does not play a crucial role in their final conformational stability and highlights the dissimilarities of the racemization barriers in solution and solid states. Spin-dependent electrochemical and charge transport measurements of enantioenriched PTM-based self-assembled monolayers did not reveal the existence of the CISS effect. Density functional theory quantum transport calculations show that the most dominant contribution to the spin polarization would not be CISS-related polarization, but the one intrinsically associated with the radical spin. Nevertheless, at room temperature this contribution is affected by thermal fluctuations averaging to a net zero spin polarization., The work was supported by Generalitat de Catalunya (2021SGR00443), PID2019-111682RB-I00, PID2022-141393OB-I0, PID2021-127521NB-I00, PID2021-125604NB-I00, PID2019- 109539GB-C43, and PID2022-141712NB-C21 funded by MCIN/AEI/10.13039/501100011033 and ERDF “A way of making Europe” and TED2021-131323B-I00 NextGenerationEU, the “Severo Ochoa” Programme for Centers of Excellence in R&D FUNFUTURE CEX2019-000917-S through the competitive FUNMAT-FIP-2018 grant and the European Commission – NextGenerationEU (Regulation EU 2020/2094), through CSIC's Quantum Technologies Platform (QTEP). J. C.-T. thanks the DOC-FAM fellowship, grant agreement No. 754397 (H2020-MSCA-COFUND-2016). J. C.-T. is enrolled at the UAB Materials Science PhD program. S. M-L. acknowledges the funding received from the Spanish Junta de Andalucía (DOC 01165). The authors thank the Centro de Servicios de Informática y Redes de Comunicación (CSIRC), UGR, for providing the computing time. L. A. Z. and J. J. P. acknowledge María de Maeztu Program for Units of Excellence in R&D (Grant No. CEX2018-000805-M), Generalitat Valenciana through Programa Prometeo (2021/017) and Centro de Computación Científica of the Universidad Autónoma de Madrid., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Automated Scanning Dielectric Microscopy Toolbox for Operando Nanoscale Electrical Characterization of Electrolyte-Gated Organic Transistors

  • Tanwar, Shubham
  • Millan Solsona, Ruben
  • Ruiz Molina, Sara
  • Mas Torrent, Marta
  • Kyndiah, Adrica
  • Gomila, Gabriel
Electrolyte-gated organic transistors (EGOTs) leveraging organic semiconductors' electronic and ionic transport characteristics are the key enablers for many biosensing and bioelectronic applications that can selectively sense, record, and monitor different biological and biochemical processes at the nanoscale and translate them into macroscopic electrical signals. Understanding such transduction mechanisms requires multiscale characterization tools to comprehensively probe local electrical properties and link them with device behavior across various bias points. Here, an automated scanning dielectric microscopy toolbox is demonstrated that performs operando in-liquid scanning dielectric microscopy measurements on functional EGOTs and carries out extensive data analysis to unravel the evolution of local electrical properties in minute detail. This paper emphasizes critical experimental considerations permitting standardized, accurate, and reproducible data acquisition. The developed approach is validated with EGOTs based on blends of organic small molecule semiconductor and insulating polymer that work as accumulation-mode field-effect transistors. Furthermore, the degradation of local electrical characteristics at high gate voltages is probed, which is apparently driven by the destruction of local crystalline order due to undesirable electrochemical swelling of the organic semiconducting material near the source electrode edge. The developed approach paves the way for systematic probing of EGOT-based technologies for targeted optimization and fundamental understanding., This work received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreement No 813863 (BORGES), the EIC Pathfinder PRINGLE project (grant agreement No 101046719), from the Spanish Ministerio de Economıa, Industria y Competitividad, and EU FEDER, through grant no. PID2019-110210GB-I00 (BIGDATASPM), from the Ministerio de Ciencia e Innovacion through grant no. PID2022-142297NB-I00 (BIOMEDSPM40), from the Generalitat de Catalunya through CERCA, and from the ICREA foundation (ICREA Academia award to G.G.). S.T. acknowledges the support from Joerg Barner (JPK) regarding automating the AFM operations. S.R.-M. and M.M.-T. acknowledge MCIN/AEI/10.13039/501100011033/ERDF,UE with project SENSATION PID2022-141393OB-I00, the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURECEX2019-000917-S) and Generalitat de Catalunya (2021-SGR-00443)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of hydrophilic side chains on the thin film transistor performance of a benzothieno-benzothiophene derivative

  • Gicevičius, Mindaugas
  • James, Ann Maria
  • Reicht, Lukas
  • McIntosh, Nemo
  • Greco, Alessandro
  • Fijahi, Lamiaa
  • Devaux, Félix
  • Mas Torrent, Marta
  • Cornil, Jérôme
  • Geerts, Yves Henri
  • Zojer, Egbert
  • Resel, Roland
  • Sirringhaus, Henning
Side-chain engineering in molecular semiconductors provides a versatile toolbox for precisely manipulating the material's processability, crystallographic properties, as well as electronic and optoelectronic characteristics. This study explores the impact of integrating hydrophilic side chains, specifically oligoethylene glycol (OEG) units, into the molecular structure of the small molecule semiconductor, 2,7-bis(2(2-methoxy ethoxy)ethoxy) benzo[b]benzo[4,5] thieno[2,3-d] thiophene (OEG-BTBT). The investigation includes a comprehensive analysis of thin film morphology and crystallographic properties, along with the optimization of deposition parameters for improving the device performance. Despite the anticipated benefits, such as enhanced processability, our investigation into OEG-BTBT-based organic field-effect transistors (OFETs) reveals suboptimal performance marked by a low effective charge carrier mobility, a low on/off ratio, and a high threshold voltage. The study unveils bias stress effects and device degradation attributed to the high ionization energy of OEG-BTBT alongside the hydrophilic nature of the ethylene-glycol moieties, which lead to charge trapping at the dielectric interface. Our findings underscore the need for a meticulous balance between electronic properties and chemical functionalities in molecular semiconductors to achieve stable and efficient performance in organic electronic devices., This project has received funding from the European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement no. 811284 (UHMob). Part of this work was undertaken using equipment facilities provided by the Henry Royce Institute, via the grant Henry Royce Institute, Cambridge Equipment: EP/P024947/1. Some of the work in Graz was funded by the Austrian Science Fund (FWF) [Grant-DOI: 10.55776/P33903-N]. Part of the computational results presented have been generated using the Vienna Scientific Cluster (VSC). The work in Mons has been funded by the Fund for Scientific Research (FRS) of FNRS within the Consortium des Equipements de Calcul Intensif (CECI) under grant 2.5020.11 and by the Walloon Region (ZENOBE Tier-1 supercomputer) under grant 1117545. J. C. is an FNRS research director. L. F. and M. M.-T. also acknowledge funds by MCIN/AEI/10.13039/501100011033/ERDF,UE with project SENSATION PID2022-141393OB-I00, and the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURECEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bioreceptors' immobilization by hydrogen bonding interactions and differential pulse voltammetry for completely label-free electrochemical biosensors

  • López Marzo, Adaris
  • Mas Torrent, Marta
Label-free electrochemical biosensors show great potential for the development of point-of-care devices (POCDs) for environmental and clinical applications. These sensors operate with shorter analysis times and are more economic than the labelled ones. Here, four completely label-free biosensors without electron transfer mediators were developed for hepatitis B virus (HBV) detection. The approach consisted in (i) the modification of gold surfaces with cysteamine (CT) or cysteine (CS) linkers, (ii) the subsequent antibody (Ab) immobilization, either directly by hydrogen bonding (HB) interactions or by covalent bonds (CB) using additional reagents, and (iii) measuring the biosensor response by electrochemical impedance spectroscopy (EIS) and differential pulse voltammetry (DPV). The electrode surfaces at each stage of the modification process were characterised by X-ray photo-electron spectroscopy (XPS) and atomic force microscopy (AFM). The combination of Ab immobilization by HB with the DPV analysis displayed improved repeatability, lower interference to serum matrix and similar limits of detection and quantification than the traditional biosensors that immobilize the Ab via CB and use EIS as readout technique. The Ab immobilization by HB is shown as a simple, efficient and low-cost alternative to CB ones, while DPV was faster and showed better performance than EIS. The CT-HB biosensor displayed the lowest limits of detection and quantification of 0.14 and 0.46 ng/mL, respectively, a 0.46-12.5 ng/mL linear analytical range, and 100% of recovery for 1/10 human serum media during HBV surface antigen detection by DPV. Even, it preserved the initial sensing capability after 7 days of its fabrication., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported by the Project CARESS PDC2021-121511-I00 funded by MCIN/AEI/10.13039/501100011033 and the European Union through “NextGeneration EU/PRTR”. The authors also thank funding from the Spanish Government within the research project PID2022-141393OB-I00 and the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2023-001263-S). Funding was also provided by the Generalitat de Catalunya (2021 SGR 00443)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single-Cell Membrane Potential Stimulation and Recording by an Electrolyte-Gated Organic Field-Effect Transistor

  • Lago, Nicolò
  • Galli, Alessandra
  • Tonello, Sarah
  • Ruiz Molina, Sara
  • Marino, Saralea
  • Casalini, Stefano
  • Buonomo, Marco
  • Pisu, Simona
  • Mas Torrent, Marta
  • Giorgi, Giada
  • Pedersen, Morten Gram
  • Bortolozzi, Mario
  • Cester, Andrea
The reliable stimulation and recording of electrical activity in single cells by means of organic bio-electronics will be an important milestone in developing new low-cost and highly biocompatible medical devices. This paper demonstrates extracellular voltage stimulation and single-cell membrane potential recording by means of a dual-gate electrolyte-gated organic field-effect transistors (EGOFET) employing 2,8-Difluoro-5,11-bis(triethylsilylethynyl)anthradithiophene blended with polystyrene as active material. To obtain a sufficiently small footprint to allow bidirectional communication at the single cell level, the EGOFET technology has been scaled down implementing a Corbino layout, paving the way to the development of novel bidirectional Electrocorticography (ECoG) devices with a high spatial resolution. A specific and thorough analysis of the working mechanisms of EGOFET-based bio-sensors is reported, highlighting the importance of the device design and using an appropriate batch of measurements for the recording of the electrical activity of cells., This work was partially supported by the University of Padova, Department of Information Engineering, under the initiative Project PROACTIVE 2018; and the PRIN project (No. 2017228L3J), Department of Physics and Astronomy “G. Galilei”, University of Padua. S.R-M. and M.M-T. acknowledge the funds from MCIN/AEI/10.13039/501100011033/ERDF, UE with project SENSATION PID2022-141393OB-I00, the State Investigation Agency, through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S), and the Generalitat de Catalunya (2021 SGR 00443). S.R-M. acknowledges the FPI fellowship from MCINN. S.C. acknowledges two national projects: i) “Nanochemistry for Energy andHealth, NexuS” and ii) “Complessità Chimica C2” funded by Italian Ministry of Education, Universities and research within the funding network termed “Dipartimenti di Eccellenza”. Furthermore, S.C. acknowledges financial support of the University of Padova through grant P-DiSC#11NexuS_BIRD2020-UNIPD (CARBON-FET)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-bandgap oligothiophene-naphthalimide oligomeric semiconductors for thermoelectric applications

  • Alonso Navarro, Matías J.
  • Zapata Arteaga, Osnat
  • Riera Galindo, Sergi
  • Guo, Jiali
  • Perevedentsev, Aleksandr
  • Gutiérrez Fernández, Edgar
  • Reparaz, J. Sebastian
  • Ramos, Mar
  • Müller, Christian
  • Martín, Jaime
  • Mas Torrent, Marta
  • Segura, José L.
  • Campoy Quiles, Mariano
State-of-the-art p-type organic conjugated polymers are mostly thiophene-based semiconductors. Still, novel chemical design and a fresh perspective on different polymer backbones could pave the way for new high-performing materials and a deep understanding of donor-acceptor conjugated assemblies. Herein we designed and synthesized two novel electroactive oligomeric materials based on a donor terthiophene unit endowed with a strong electron-withdrawing naphthalimide unit. This molecular assembly has been polymerized using a palladium cross-coupling reaction with two different linkers, 1,1,1,2,2,2-hexabutyldistannane and (4,8-bis((2-ethylhexyl)oxy)benzo[1,2-b:4,5-b’]dithiophene-2,6diyl)bis(trimethylstannane), to obtain the target polymers NIP3T-poly and NIP3T-BDT-poly, respectively. Both polymers exhibited an extended absorption up to 1000 nm and higher hole field-effect mobilities of up to 1.8 x 10-3 cm2V-1s-1, in comparison to the molecular assembly NIP3T, and precisely tuned energy levels that make them compatible with common p-type dopants like 2,3,5,6-tetrafluoro-7,7,8,8-tetracyanoquinodimethane (F4TCNQ). After optimizing the doping level, we obtained a thermoelectric figure of merit up to zT = 0.02 for NIP3T-BDT-poly, comparable with benchmark F4TCNQ-vapor doped polythiophenes., This work was financially supported by the European Commission through the Marie Skłodowska-Curie project HORATES (GA-955837), MICINN (PID2022-138908NB-C33, PID2022-141393OB-I00 and TED2021-129886BC43), through the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2023-001263-S) and the UCM (INV.GR.00.1819.10759). MJAN gratefully acknowledges Universidad Rey Juan Carlos for his postdoctoral contract. S. RG. is thankful to Marie Skłodowska Curie Cofund, Beatriu de Pinós Fellowship (AGAUR-2019 BP 00200) and Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2020) for Grant Agreement No. 101025608, IDEAL. We thank Anders Mårtensson for help with SEC measurements and Dr. Agustín Mihi (ICMAB-CSIC) for providing access to the Bruker IR spectrophotometry equipment, and Prof. Joaquim Puigdollers (UPC) for fruitful discussions, With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrolyte-Gated Organic Field-Effect Transistor for Monitoring Amyloid Aggregation

  • Ruiz Molina, Sara
  • Martínez Domingo, Carme
  • Ricci, Simona
  • Casalini, Stefano
  • Mas Torrent, Marta
Amyloid-β peptide aggregation is a crucial process in neurological disorders such as Alzheimer’s and Parkinson’s diseases. Amyloids tend to assemble first into oligomers and, subsequently, into larger fibrils. The oligomer species are regarded as the primary cause of neurological dysfunction, and hence, they are key biomarkers for diagnosis and therapy. However, this aggregation process is complex to study, typically requiring the use of a combination of techniques and labeling of the biomolecules. Here, we demonstrate that the electrolyte-gated organic field-effect transistor (EGOFET) device is a promising low-cost transducer that can be used to monitor amyloid aggregation using an electrical readout and without the need of labeling. For this purpose, the gold surface of the gate contact was modified with an amyloid-β 1-40 (Aβ1-40) oligomer-specific antibody using cysteine-protein G (cys-PG). The bioengineered Au electrode was implemented as a recognition element to monitor the aggregation kinetics of Aβ1-40, employing two complementary detection measurements: EGOFET and electrochemical impedance spectroscopy (EIS). The maximum amount of oligomer species was detected after 1 h of incubation. Additionally, dynamic light scattering (DLS) data corroborated these results. More broadly, this work shows the potential of EGOFETs as a label-free platform for studying in vitro protein aggregation, which could be appealing in the future for exploring systematically the experimental parameters affecting the aggregation process or for the development of medical treatments that target the reduction of such aggregation., This work was funded by MCIN/AEI/10.13039/501100011033/ERDF,UE with project SENSATION PID2022-141393OB-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2023-001263-S) and the Generalitat de Catalunya (2021-SGR-00443). S.R.-M. is enrolled in the UAB Chemistry Ph.D. S.C. acknowledges two national projects: (i) “Nanochemistry for Energy and Health, NexuS” and (ii) “Complessità Chimica C2” funded by the Italian Ministry of Education, Universities and Research within the funding network termed “Dipartimenti di Eccellenza.” S.C. also acknowledges financial support from the University of Padova through grant P-DiSC#11NexuS_BIRD2020-UNIPD (CARBON-FET)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of mechanical stress on flexible electrolyte-gated organic field-effect transistors

  • Ruiz Molina, Sara
  • Ricci, Simona
  • Martínez Domingo, Carme
  • Ortiz Aguayo, María Jesús
  • Pfattner, Raphael
  • Schweicher, Guillaume
  • Geerts, Yves H.
  • Salzillo, Tommaso
  • Mas Torrent, Marta
Electrolyte-gated organic field-effect transistors (EGOFETs) are attracting great attention for the development of low-cost and flexible sensors. However, in order to progress towards such applications, it is key to understand the stability of these devices in aqueous media and under mechanical deformation. Here, we have fabricated flexible EGOFETs based on two small molecule organic semiconductors blended with polystyrene. These materials have been printed employing a low-cost solution-based technique, obtaining large area crystalline films. The devices revealed a good EGOFET performance in terms of mobility. Finally, the devices were operated under tensile and compressive strain, observing a current increase (decrease) when a compressive (tensile) deformation was applied, revealing large gauge factors. Thus, this work shows the importance of assessing the device response under mechanical deformation when flexible EGOFET-based sensors are developed, in order to achieve a reliable response., This work was funded by MCIN/AEI/10.13039/501100011033/ERDF, UE with project SENSATION PID2022-141393OB-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2023-001263-S) and the Generalitat de Catalunya (2021-SGR-00443). This work was also funded by European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 811284 (UHMob). S. R.-M. is enrolled in the UAB Chemistry PhD program. C. M. acknowledges her Juan de la Cierva fellowship. T. S. thanks the Programma per Giovani Ricercatori “Rita Levi Montalcini” year 2020 (grant PGR20QN52R) of the Italian Ministry of University and Research (MUR) for the financial support. Project funded under the National Recovery and Resilience Plan (NRRP), Mission 04 Component 2 Investment 1.5—NextGenerationEU, call for tender no. 3277 dated 30/12/2021 (award number: 0001052 dated 23/06/2022). Y. G. thanks the Belgian National Fund for Scientific Research (FNRS) for financial support through research projects: PDR T.0058.14, Pi-Fast PDR T.0072.18, PICHIR PDR T.0094.22, DIFFRA GEQ U.G001.19, POLYP EQP U.N032.21F, POLYP2 EQP U.N03323F, CHIRI CDR J. 0088.24. G. S. thanks the FNRS for financial support through research project COHERENCE2 No F.4536.23. G. S. is a FNRS Research Associate. G. S. acknowledges financial support from the Francqui Foundation (Francqui Start-Up Grant) and Wiener-Anspach Foundation (FWA, ZT1 research project)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vertical Phase Separation in Blended Organic Semiconducting Films and Impact on Their Electrical and Direct X-Ray Detection Properties

  • Giglio, Maria Elisabetta
  • Colantoni, Elisabetta
  • Fratelli, Ilaria
  • Martínez Domingo, Carme
  • Martinez Zaragoza, Pedro
  • Napolitano, Giulia
  • Campari, Enrico
  • Branchini, Paolo
  • Basiricó, Laura
  • Tortora, Luca
  • Mas Torrent, Marta
Blends of small-molecule organic semiconductors (OSCs) and insulating polymers in Organic Field-Effect Transistors (OFETs) are mainly used to assist the solution-processing of OSCs, but they can also reduce interfacial charge traps due to vertical phase separation. Such charge traps are known to affect both the electrical response and radiation-induced charge collection capability in these devices. This study aims to optimize vertical phase separation in blend films of 1,4,8,11-tetramethyl-6,13-triethylsilylethynyl pentacene (TMTES) and polystyrene (PS) to minimize charge trap density at the semiconductor/dielectric interface, thereby enhancing the electrical performance and direct X-ray detection sensitivity in OFETs. A PS mass concentration of 33% is identified as optimal for achieving high-quality phase separation and favorable film morphology. This formulation led to films with reduced interfacial hole trap density and improved electrical and detection capacity, demonstrating a hole field-effect mobility of (1.3 ± 0.4) cm<sup>2</sup>V<sup>−1</sup> s<sup>−1</sup> and X-ray sensitivity of (5.6 ± 0.2) × 10<sup>3</sup> µC Gy<sup>−1</sup> cm<sup>−2</sup> at low applied voltages. Remarkably, the molecular weight of PS does not significantly impact vertical phase separation, thin film morphology, or electrical properties. These findings are crucial for the development of high-performance OFETs and their application as X-ray detectors., M.E.G., E.C., and I.F. contributed equally to this work. This work was funded by Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033/ERDF, UE with project SENSATION PID2022-141393OB-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2023-001263-S) and the Generalitat de Catalunya (2021-SGR-00443). M.E. acknowledges her FPI fellowship and is enrolled in the UAB Materials Science PhD program. L.B. and G.N. acknowledge the RELOAD project funded by Fondazione Cariplo and Fondazione CDP, Grant No. 2022–1834. I.F. received funding from the European Union's Horizon Europe research and innovation program under the Marie Skłodowska-Curie Actions grant agreement No 101105245. The Grant of Excellence Departments 2023–2027, MIUR (ARTICOLO 1, COMMI 314–337 LEGGE 232/2016), is gratefully acknowledged by L.T. The authors acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymorph Screening and Investigation of Charge Transport of ditBuC6-BTBT

  • Pandey, Priya
  • Modesti, Federico
  • McIntosh, Nemo
  • Ruzié, Christian
  • Turetta, Nicholas
  • Fijahi, Lamiaa
  • Remigio, Massimiliano
  • Schweicher, Guillaume
  • Geerts, Yves Henri
  • Mas Torrent, Marta
  • Erk, Peter
  • Cornil, Jérôme
  • Samorì, Paolo
  • Modena, Enrico
  • Maini, Lucia
In this study, we investigate the relationship between the polymorphism and crystallographic parameters and the charge transport properties achieved through the fabrication of organic field-effect transistors (OFETs) based on a novel molecular semiconductor, i.e., 2,7-bis-(7,7-dimethyloctyl)-benzo-[b]-benzo-[4,5]-thieno-[2,3-d]-thiophene (ditBuC6-BTBT). Four polymorphs of ditBuC6-BTBT were identified: three observed at room temperature (Forms I, Ia, and II), and one appearing above 100 °C (Form III). While cell parameters were measured for all forms, full crystal structures were determined only for Forms Ia and II. Although a direct correlation between molecular packing and charge transport properties could not be established from the present study, the structural analysis of the polymorphs contributes to a broader understanding of the packing motifs in ditBuC6-BTBT. A meticulous examination of the minute discrepancies in the powder patterns substantiated the existence of both the metastable Form I and Form Ia, which became more difficult to isolate due to unintentional seeding of the thermodynamically stable Form II. Nonequilibrium crystallization techniques utilizing thermal gradient and bar-assisted meniscus shearing methods were explored to enhance control over polymorph selection. The intrinsic charge transport properties ruled by the overlap of the frontier orbitals were studied by computing the transfer integrals. Optimized devices fabricated by depositing thin films by solution shearing and vacuum evaporation led to field-effect mobility in the linear regime of ca. 0.05 cm2 V-1 s-1. The observed device performances were interpreted as a result of the combined effects of crystal packing features, ionization potential values, and polymorphic coexistence, highlighting the challenges in deriving clear structure-property correlations and underscoring the complexities in achieving high-performance organic electronics with this material., This work has received funding from the European Union’s Horizon 2020 research and innovation program under the Marie Sklodowska-Curie grant UHMob (Ultrahigh Charge Carrier Mobility to Elucidate Transport Mechanisms in Molecular Semiconductors) Nos. 811284 and 801505. The authors thank the Belgian National Fund for Scientific Research (FNRS) for financial support through research projects: PHASETRANS BTBT PDR 2.4565.11, PDR T.0058.14, Pi-Fast PDR T.0072.18, PICHIR PDR T.0094.22, DIFFRA GEQ U.G001.19, POLYP EQP U.N032.21F, POLYP2 EQP U.N03323F, CHIRI CDR J. 0088.24, CISSCA WEAVE T.W.023.23, WEL-T-CR-2023 A-04, 2D to 3D no. 30489208, and CHISUB no. 40007495. Financial support from ULB and the French Community of Belgium through the concerted research action ARC SADI, no. 20061, is also gratefully acknowledged. G.S. thanks the FNRS for financial support through the research project COHERENCE2 No. F.4536.23. G.S. is an FNRS Research Associate. G.S. acknowledges financial support from the Francqui Foundation (Francqui Start-Up Grant). M.M.-T. and L.F. also acknowledge financial support from MCIN/AEI/10.13039/501100011033/ERDF, UE with project SENSATION PID2022-141393OB-I00, the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURECEX2019-000917-S), and the Generalitat de Catalunya (2021-SGR-00443). The research in Mons is supported by the Belgian National Fund for Scientific Research (FRS-FNRS) within the Consortium des Équipements de Calcul Intensif-CÉCI (grant number U.G.018.18), and by the Walloon Region (LUCIA Tier-1 supercomputer; grant number 1910247). J.C. is an FNRS research director., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Surface Modification and Stabilization of Eutectic Gallium Indium Nanoparticles with an Electrochemically Active Ligand Using Low Molecular Weight Phosphorothioates in Water

  • Catalán Toledo, José
  • Romero Pallejà, Jordi
  • Crivillers, Núria
Liquid metal nanoparticles (LM NPs) have attracted significant attention owing to their unique properties and wide range of potential applications from electronics to biomedicine. In this study, we investigate the surface chemistry of eutectic gallium indium (EGaIn) NPs using different phosphonic acid derivatives in aqueous media. Our findings show that EGaIn NPs exhibit significant surface chemical composition changes when exposed to these ligands in solution during the ultrasonication-assisted synthesis in water, displaying optimal long-term colloidal stability in alkaline media. Interestingly, it is demonstrated for the first time that the use of sulfur-containing phosphonic acids, particularly phosphorothioates, leads to improved colloidal suspension stability and higher control over the NP size distribution. In addition, using a phosphorothioate derivative with a terminal N-hydroxysuccinimide group, a novel synthetic conjugation strategy to incorporate redox-active molecules, in particular ferrocene, onto the NP surface has been developed, permitting broadening of their potential applications in (electro)-catalysis and sensing., The authors thank Dr. Judith Oró from the Electron Microscopy Service at the ICMAB-CSIC and Kapil Gupta and Marcos Rosado from ICN2. We also thank the SOFT service at ICMAB-CSIC and Dr. Djafari for fruitful discussions and help on this project. This work was funded by the Spanish Ministry (MCIN/AEI/10.13039/501100011033/ERDF) with the project SENSATION PID2022-141393OB-I0, TED2021-122550B–C22, the “Severo Ochoa” Programme for Centres of Excellence in R&D (CEX2019-000917-S and CEX2023-001263-S), and the Generalitat de Catalunya (2021-SGR-00443). J.C.-T. thanks the DOC-FAM Fellowship, grant agreement no. 754397 through H2020-MSCA-COFUND-2016. The authors acknowledge the support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). J.C.-T. is enrolled in the UAB Materials Science Ph.D. programme., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploration of alternative gate dielectric materials for RADFET sensors

  • Amat, Esteve
  • Martínez Domingo, Carme
  • Fleta, Celeste
  • Mas Torrent, Marta
  • Santos Lozano, M. Asunción
RADFETs are a low-cost option for implementing a radiation sensor. The characteristics of their gate dielectric material is the key element due to its sensitivity to ionizing radiation. We have studied alternative (high-K and organic) materials to the conventional SiO<inf>2</inf>-based gate dielectric in order to improve the device performance. Electrical characterization in irradiated samples has been carried on to study the radiation response of each material to low levels of ionizing radiation. The HfO<inf>2</inf>-based samples have a much higher sensitivity per unit thickness than the SiO<inf>2</inf>-based ones. High-K based RADFETs show promising performance as gate dielectrics for future silicon based radiation sensors., This work received funding from the European Union’s H2020 research and innovation program under grant agreement N° 101018596 (NEST). C.M. and M.M. acknowledge funds from MCIN/AEI/10.13039/501100011033/ERDF, UE with projects SENSATION PID2022-141393OB-I00 and PDC2022-133750-I00, and the “Severo Ochoa” Program for Excellence Centers in R&D (CEX2023-001263-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gate-Dielectric Surface Engineering With Fluorinated Monolayers: Minimizing Contact Resistance and Nonidealities in OFETs

  • Mesforush, Shaghayegh
  • Cazorla, Alba
  • Melville, Hayley
  • Blanchard, Philippe
  • Klauk, Hagen
  • Zschieschang, Ute
  • Zhang, Min
  • Fijahi, Lamiaa
  • Mas Torrent, Marta
  • Barrena, Esther
Organic field-effect transistors (OFETs) hold great potential for flexible, large-area electronics, but face challenges related to hysteresis in the transfer characteristics, contact resistance, and charge trapping. This study examines the growth and electrical properties of 2-decyl-7-phenyl[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT-10) organic-semiconductor films on Al 2 O 3 as gate dielectric, focusing on the effects of surface functionalization with a self-assembled monolayer (SAM) of either a non-fluorinated or a more or less strongly fluorinated phosphonic acid. This functionalization of the gate dielectric surface is found not to significantly affect the structural organization of Ph-BTBT-10 thin films grown at room temperature. Thin films grown at room temperature exhibit a single-layer lamella with a step height of 26.7 & Aring;, although there is evidence of a bilayer arrangement at the semiconductor-dielectric interface. Remarkably, the use of Al 2 O 3 functionalized with a fluorinated SAM leads to significant improvements in OFET performance, including near-zero threshold voltages, reduced hysteresis, reduced contact resistance, and more ideal electrical characteristics compared to bare Al 2 O 3. This work highlights the significant yet non-trivial benefits of gate-dielectric surface functionalization in reducing contact resistance and mitigating non-ideal behaviors in OFETs, offering an alternative to traditional approaches like contact doping or functionalization of the source/drain contacts in bottom-contact organic thin-film transistors (TFTs)., This work was funded by the Spanish Ministry of Science and Innovation (MCIN) and State Investigation Agency (AEI) under project PID2022-136802NB-I00 and RED2022-134503-T funded by MICIU/AEI/10.13039/ 501100011033 and FEDER, UE, and through the Severo Ochoa Programme for Centres of Excellence in R&D (CEX2023-001263-S). This study is part of the Advanced Materials programme (In-CAEM project) and was partially supported by the MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1) and by Generalitat de Catalunya. This work was carried out within the framework of the doctoral PhD program of Material Science, Department of Physics of the Universitat Autonoma de Barcelona (UAB). M.M. thanks financial funding by MCIN/AEI/10.13039/501100011033/ERDF, UE with project SENSATION PID2022-141393OB-I00, and by the Generalitat de Catalunya (2021-SGR-00443). M.Z. acknowledges her CSC fellowship. The authors also thank European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 811284 (UHMob)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase Transformations in Evaporated Ph-BTBT-10 Thin Films and Impact on the Device Performance

  • Fijahi, Lamiaa
  • Yan, Shunya
  • James, Ann Maria
  • Zhang, Min
  • Cazorla, Alba
  • Tamayo, Adrián
  • Li, Jinghai
  • Ocal, Carmen
  • Barrena, Esther
  • Resel, Roland
  • Mas Torrent, Marta
This paper reports on the phase transformation occurring in evaporated thin films of the organic semiconductor 2-decyl-7-phenyl[1]benzothieno[3,2-b][1]benzothiophene (Ph-BTBT-10), along with its impact on the performance of organic thin-film field-effect transistors (OFETs). Temperature-dependent X-ray reflectivity (XRR) studies reveal that the films crystallize in a single-layer structure, which converts to a bilayer phase in the temperature range of 110°C –140°C; at further elevated temperatures, a liquid-crystal phase is formed. The conversion of the as-evaporated films to the bilayer structure is investigated by atomic force microscopy (AFM) and Kelvin probe force microscopy (KPFM) at specific annealing temperatures. The combination of XRR, AFM, and KPFM points out that only at the higher annealing temperature the phase transformation is completed. In a subsequent stage, the films are investigated as active layers in OFETs. An enhanced performance is observed in the annealed films with a higher mobility and reduced level of charge traps. The best electrical characteristics are realized when the bilayer transformation is fully accomplished., This work was funded by European Union's Horizon 2020 research and innovation programme under the Marie Skłodowska-Curie grant agreement No 811284 (UHMob) and by MCIN/AEI/10.13039/501100011033/ERDF, UE with projects SENSATION PID2022-141393OB-I00, RED2022-134503-T, and PDC2022-133750-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2023-001263-S). The authors also thank Generalitat de Catalunya (2021-SGR-00443). This study is part of the Advanced Materials programme (In-CAEM project) and is partially supported by MCIN with funding from European Union NextGenerationEU (PRTR-C17.I1). M.Z. and S.Y. are financially supported by the China Scholarship Council (CSC) under Grant No. 202006990034. This work has been carried out within the framework of the doctoral PhD program of Material Science of the Universitat Autònoma de Barcelona (UAB)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Immobilising molecular redox mediators for the oxygen evolution reaction using self-assembled monolayers

  • Gharbi, Samar
  • Alcón, Isaac
  • Ribas Ariño, Jordi
  • Crivillers, Núria
  • Bromley, Stefan T.
  • Mas Torrent, Marta
The development of efficient and economical electrocatalysts for the oxygen evolution reaction (OER) that are stable and free of noble metals remains a significant scientific and technological challenge. The use of redox mediators (RMs) offers a promising approach to enhance the efficiency of electrocatalysts for a range of applications. However, the migration of the RM molecules between the electrodes, also known as shuttle effect, leads to undesirable redox side reactions and a reduction of the OER performance. Here, we introduce a novel approach to overcome this limitation by showing how covalently attaching RMs to the electrode surface through self-assembled monolayers (SAMs) is a promising route to immobilize them and prevent their diffusion into the electrolyte. For this purpose, we prepared different SAMs using two types of RMs based on tetrathiafulvalene (TTF) derivatives and using indium tin oxide (ITO) and fluorine doped tin oxide (FTO) as substrates. All electrodes showed efficient electrocatalytic activity under alkaline conditions. In this small proof-of-concept set of systems, we could achieve an OER performance with an overpotential of 400 mV at 0.25 mA cm<sup>−2</sup> and a Tafel slope of 103 mV dec<sup>−1</sup>. We rationalise these experimental findings with computational chemical modelling, which suggests that further improvements could be achieved through targeted chemical modifications to tune the highest occupied molecular orbital energy in these TTF-based RMs. Thus, this work demonstrates that covalent immobilization of RMs via SAMs offers a robust platform for the rational molecular engineering of electrocatalysts., This work was funded by MCIN/AEI/10.13039/501100011033/ERDF, UE with projects SENSATION PID2022-141393OB-I00, TED2021-132550B-C22, TED2021-132550B-C21 and PID2021-127957NB-I00 and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2023-001263-S) and María de Maeztu program for Spanish Structures of Excellence (CEX2021-001202-M). The authors also acknowledge funds from Generalitat de Catalunya with projects 2021-SGR-00443, 2021-SGR-00354 and HYDROCAT 2023 CLIMA 00064., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning Intersystem Crossing to Triplet Excitons in sp3-Functionalized (6,5) Carbon Nanotubes through Defect Density and Functional Groups

  • Sousa, J. Alejandro de
  • Settele, Simon
  • Biktagirov, Timur
  • Djafari, Jamila
  • Gerstmann, Uwe
  • Goovaerts, Etienne
  • Zaumseil, Jana
  • Crivillers, Núria
  • Cambré, Sofie
Manipulation of triplet states lies at the origin of the emerging applications in quantum sensing and spin-based optoelectronics. In this work, we employ optically detected magnetic resonance (ODMR) spectroscopy to investigate how sp3 functionalization of (6,5) single-walled carbon nanotubes (SWCNTs) influences triplet exciton (TE) behavior. Functionalization with closed-shell 4-nitrophenyl groups at varying defect densities reveals that similar to singlet excitons, the TEs localize at the defect sites, leading to reduced zero-field splitting (ZFS) parameters and a distortion from the axial symmetry typically observed for pristine tubes. ODMR contrast is highest at low defect densities, suggesting that interdefect interactions significantly affect TE generation and spin polarization. Density functional theory (DFT) confirms the experimental observations that a reduced ZFS is observed for the sp3-functionalized SWCNTs. Open-shell (radical) functionalization introduces strong exchange interactions between the radical's unpaired electron and the TEs, resulting in an effective S = 3/2 system with enhanced ODMR contrast. These findings highlight how tuning the nature and spatial arrangement of sp3 defects offers a powerful strategy to control TE dynamics in SWCNTs, toward their integration into advanced quantum materials and devices., J.A.d.S. acknowledges support from FPI from MINECO for a research stay at the University of Antwerp to conduct these experiments and funding from the European Union through a HORIZON-MSCA postdoctoral fellowship (Grant agreement No 101148568 “C-BRIGHT”). S.S. and J.Z. acknowledge funding by the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (Grant agreement No. 817494 “TRIFECTs”). Views and opinions expressed are those of the authors only and do not necessarily reflect those of the European Union. N.C. and S.C. acknowledge funding from the Quantera project OPTRIBITS (FWO: G0AHV24N, AEI: PC2024-153480). S.C. thanks the FWO for providing infrastructure funding for the ESR instrumentation (I004920N). N.C. thanks the MCIN/AEI/10.13039/501100011033/ ERDF, UE with project SENSATION PID2022-141393OB-I00, the ‘‘Severo Ochoa’’ Programme for Centers of Excellence in R&D (CEX2023-001263-S) and the Generalitat de Catalunya (2021-SGR-00443). The Paderborn theory group (U.G. and T.B.) acknowledges financial support from Deutsche Forschungsgemeinschaft, DFG (TRR 142/3-2025 – Project No. 231447078) and grants of high-performance computer time at the Paderborn Center for Parallel Computing (PC2)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrically Readable Lateral Flow Assay Using Organic Transistors for Diagnostic Applications

  • Ortiz Aguayo, María Jesús
  • Martínez Domingo, Carme
  • Gutiérrez, Diego
  • Kos, Dean
  • Mas Torrent, Marta
Electrolyte-gated organic field-effect transistors (EGOFETs) are emerging as powerful, ultrasensitive label-free biosensors, but their applicability as portable diagnostic tools remains constrained by poor microfluidic miniaturization and complex multi-step ex situ assays. Simultaneously, paper-based lateral flow (LF) immunoassays hold significant relevance for integrated diagnostic applications in the market, but are limited by the low sensitivity of optical detection. To address these challenges, a simple EGOFET integrated with LF paper fluidics are reported to obtain a reusable, highly portable, and cost-effective point-of-care (PoC) test with rapid results (≈20–30 min). The test is validated for Human Immunoglobulin G detection, achieving a wide linear range, high selectivity, reproducibility, and a low limit of detection of 0.1 fm. The portability of the system is demonstrated in a designed prototype with a miniaturized electronic reader, operating via an adapted USB-connected smart device. This work fulfills the requirements of low-cost PoC tests and offers a foundation for the next generation of digital LF assays., This work was funded by the MCIN/AEI/10.13039/501100011033/ERDF, UE, with projects SENSATION PID2022-141393OB-I00 and PDC2021-121511-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2023-001263-S). The authors also acknowledge funds from the Generalitat de Catalunya (2021-SGR-00443 and 2023 PROD 00118). M.O. acknowledges her FPI fellowship and is enrolled in the UAB Chemistry PhD program. D.K. acknowledges the Beatriu de Pinós postdoctoral programme (AGAUR 2023 BP 00236), funded by the Secretariat of Universities and Research of the Department of Business and Knowledge of the Government of Catalonia, and the Marie Skłodowska-Curie Actions programme of Horizon Europe with project “OPTOCHARGE” (ID: 101066319). Special acknowledgments to Engineer Carlos Villegas for his advice on 3D printing., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microwave transmission and dynamical response of three on-chip superconducting resonators coupled to the same molecular spin ensemble

  • Río, Carolina del
  • Roca-Jerat, Sebastián
  • Pakulski, Paweł
  • García-Palacios, José Luis
  • Pallarés, María C.
  • Sesé Monclús, Javier
  • Pinkowicz, Dawid
  • Lostao, Anabel
  • Zueco, David
  • Luis, Fernando
We study the simultaneous interaction of a sample of organic free radicals, which realize the spin-1/2 model with a quasi-isotropic g factor ≈ 2, with three ≈ 5.5 GHz lumped-element superconducting resonators in a chip. Each resonator consists of a finger capacitor in parallel with a single wire inductor, which maximizes the coupling intensity of the spins to the photon magnetic field. Their frequencies have been detuned relative to one another in order to make them individually addressable. Each resonator within the trio is capacitively coupled to its nearest neighbor and inductively coupled to a common readout transmission line, and only the central one hosts a molecular deposit. The device has been characterized by microwave transmission experiments performed as a function of frequency (between 5.3 and 5.7 GHz) and magnetic field (170–220 mT) at very low temperatures (T ≃ 13 mK). The results evidence a strong local interaction of the spins to the central resonator, which reaches the coherent coupling regime. In addition, they show that the same spins also couple to the modes associated with the distant resonators. These data have been analyzed on the basis of a theoretical model that incorporates the direct spin-photon interactions as well as those mediated by the circuit. The results provide a relatively simple, practical method for investigating spin resonance of a material at multiple frequencies. Besides, this method allows designing each resonator differently, to fulfill a specific role, e.g., for optimized control or readout of the spin states, which can be of relevance for the implementation of hybrid quantum computation schemes based on molecular spin qubits., This work has received support from grants TED2021-131447B-C21, PID2022-140923NB-C21, PID2022-141393OB-I00, and CEX2023-001286-S funded by MCIN/AEI/10.13039/501100011033, ERDF “A way of making Europe” and ESF “Investing in your future”, from the Gobierno de Aragón grant E09-23R-QMAD, from the European Union Horizon 2020 research and innovation programme through FET-OPEN grant FATMOLS-No862893, from the Novo Nordisk Foundation Exploratory Interdisciplinary Synergy Programme 2021 through grant NNF21OC0070832, and from the Spanish Ministry for Digital Transformation and Civil Service and Next Generation EU through the Quantum Spain project (Digital Spain Agenda 2026). It also forms part of the Advanced Materials and Quantum Communication programmes with funding from European Union Next Generation EU (PRTR-C17.I1), MCIN, Gobierno de Aragón, and CSIC (QTEP-PT-001). D.P. acknowledges the financial support of the National Science Centre (Poland) within the Opus project 2020/37/B/ST5/02735. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza., With funding from the Spanish government through the "Severo Ochoa Centre of Excellence" accreditation (CEX2023-001286-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solution-Processed Thin Film of a Novel Organic Charge-Transfer Complex for Near-Infrared Detection in Field-Effect Transistors

  • Giglio, Maria Elisabetta
  • Salzillo, Tommaso
  • Kos, Dean
  • Martínez Domingo, Carme
  • Riera Galindo, Sergi
  • Asensi, Jose Miguel
  • D'Agostino, Simone
  • Venuti, Elisabetta
  • Mas Torrent, Marta
Charge-transfer complexes (CTCs) have garnered considerable attention owing to their tunable electronic properties, which arise from the unique interactions between electron donor and acceptor molecules. However, reported fabrication methods remain largely restricted to single crystals produced via drop-casting and coevaporation or thin films prepared by cosublimation, thereby limiting their practical applicability. In this work, we successfully synthesized cocrystals of (Ph-BTBT-C10)(F4TCNQ) with a charge transfer degree (ρ) of 0.19. More importantly, we demonstrated the deposition of these cocrystals as thin films in organic field-effect transistors (OFETs) using a low-cost, rapid, and scalable solution-shearing technique compatible with large-area fabrication. The resulting CTC thin films exhibited n-type semiconducting behavior and showed a pronounced response to infrared light at 1050 nm. The combination of a single-component active layer whose near-infrared (NIR) absorption band can be chemically tuned through donor-acceptor engineering with a scalable solution-based processing method highlights the promise of CTC-based OFETs for advanced IR detection and sensing applications. These results open new perspectives for the technological exploitation of CTCs, a class of materials long studied but rarely integrated into practical devices., This work was funded by MCIN/AEI/10.13039/501100011033/ERDF, UE with project SENSATION PID2022-141393OB-I00, and through the “Severo Ochoa” Program for Centers of Excellence in R&D (CEX2023-001263-S) and by the Generalitat de Catalunya (2021-SGR-00443). M.E. acknowledges her FPI fellowship and is enrolled in the UAB Materials Science PhD program. D.K. acknowledges funding from Horizon Europe under the Marie Skłodowska-Curie project OPTOCHARGE (grant agreement no. 101066319). S.R.-G. and D.K. acknowledge support from the Beatriu de Pinós postdoctoral program (AGAUR 2019 BP 00200 and AGAUR 2023 BP 00236), funded by the Secretariat of Universities and Research of the Department of Business and Knowledge of the Government of Catalonia, and cofunded by the European Union’s Horizon 2020 research and innovation program under the Marie Skłodowska-Curie grant agreements no. 801370. T.S. thanks the Programma per Giovani Ricercatori “Rita Levi Montalcini” year 2020 (Grant No. PGR20QN52R) of the Italian Ministry of University and Research (MUR) for the financial support. This project was funded under the National Recovery and Resilience Plan (NRRP), Mission 04 Component 2 Investment 1.5-NextGenerationEU, call for tender no. 3277 dated 30/12/2021 (award number: 0001052 dated 23/06/2022)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Redox-Active Au Nanoparticles Self-Assembled at Liquid-Liquid Interface via C-Au Functionalization for Dye Degradation Electrocatalysis

  • Catalán-Toledo, José|||0000-0001-6165-1286
  • Djafari, Jamila|||0000-0003-2817-0338
  • Mas-Torrent, Marta|||0000-0002-1586-005X
  • Crivillers, Núria|||0000-0001-6538-2482
This work presents the synthesis of poly(vinylpyrrolidone)-stabilized gold nanoparticles (Au NPs) and their subsequent functionalization with molecules bearing terminal alkynes. The ligand exchange occurs at the liquid-liquid interface (LLI), resulting in the formation of Au NPs stabilized through the covalent C-Au functionalization. Simultaneously, structured composite films are formed, driven by the self-assembly of the Au NPs supported by the polymer. A comparative analysis involving three distinct alkyne-terminated derivatives reveals that film formation is favored when the ligand includes an aromatic unit such as in a ferrocenyl-stilbene derivative. The LLI films can be easily transferred to solid a support for their characterization. Additionally, it is demonstrated that these films serve as a potential electrocatalytic platform. As a proof of concept, we demonstrate that the electrochemically active ferrocene-based Au NPs films can efficiently remove methylene blue via an electro-Fenton-like reaction, surpassing the efficiency of the non-redox phenylacetylene Au NP films.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Interrogating the CISS effect in chiral and paramagnetic organic radicals, the impact of the molecular spin over the total spin polarization

  • De Sousa, J. Alejandro|||0000-0002-7948-8162
  • Mayorga-Burrezo, Paula|||0000-0002-2747-9344
  • Míguez-Lago, Sandra|||0000-0002-0424-3574
  • Catalán-Toledo, José|||0000-0001-6165-1286
  • Ramos-Tomás, Raúl|||0000-0001-8325-7140
  • Ortuño, Ana|||0000-0001-8562-7248
  • Zotti, Linda A.|||0000-0002-5292-6759
  • Palacios, Juan Jose|||0000-0003-2378-0866
  • González Campaña, Araceli|||0000-0001-5483-5642
  • Veciana i Miró, Jaume|||0000-0003-1023-9923
  • Crivillers, Núria|||0000-0001-6538-2482
Continuous research on new chiral molecular materials brings new exciting properties to the field of molecular electronics. The discovery of the chirality-induced spin selectivity (CISS) effect has expanded the list of applications for chiral structures, opening promising avenues for their exploitation in molecular spintronics. In this work, the persistent propeller-like organic perchlorotriphenylmethyl (PTM) radical is investigated as a potential spin filter combining chirality and paramagnetism. In particular, two different PTM derivatives, mono- and bis-functionalized, with one or two terminal alkyne groups have been used for the preparation of enantioenriched solid-state assemblies. The analysis of their chiroptical properties reveals that the functionalization does not play a crucial role in their final conformational stability and highlights the dissimilarities of the racemization barriers in solution and solid states. Spin-dependent electrochemical and charge transport measurements of enantioenriched PTM-based self-assembled monolayers did not reveal the existence of the CISS effect. Density functional theory quantum transport calculations show that the most dominant contribution to the spin polarization would not be CISS-related polarization, but the one intrinsically associated with the radical spin. Nevertheless, at room temperature this contribution is affected by thermal fluctuations averaging to a net zero spin polarization.