Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Vertical Phase Separation in Blended Organic Semiconducting Films and Impact on Their Electrical and Direct X-Ray Detection Properties

  • Giglio, Maria Elisabetta
  • Colantoni, Elisabetta
  • Fratelli, Ilaria
  • Martinez Domingo, Carme|||0000-0002-1897-5362
  • Martinez Zaragoza, Pedro
  • Napolitano, Giulia
  • Campari, Enrico
  • Branchini, Paolo
  • Fraboni, Beatrice|||0000-0002-4875-3816
  • Basiricò, Laura|||0000-0002-0852-1770
  • Tortora, Luca
  • Mas-Torrent, Marta|||0000-0002-1586-005X
Blends of small-molecule organic semiconductors (OSCs) and insulating polymers in Organic Field-Effect Transistors (OFETs) are mainly used to assist the solution-processing of OSCs, but they can also reduce interfacial charge traps due to vertical phase separation. Such charge traps are known to affect both the electrical response and radiation-induced charge collection capability in these devices. This study aims to optimize vertical phase separation in blend films of 1,4,8,11-tetramethyl-6,13-triethylsilylethynyl pentacene (TMTES) and polystyrene (PS) to minimize charge trap density at the semiconductor/dielectric interface, thereby enhancing the electrical performance and direct X-ray detection sensitivity in OFETs. A PS mass concentration of 33% is identified as optimal for achieving high-quality phase separation and favorable film morphology. This formulation led to films with reduced interfacial hole trap density and improved electrical and detection capacity, demonstrating a hole field-effect mobility of (1.3 ± 0.4) cmV s and X-ray sensitivity of (5.6 ± 0.2) × 10 µC Gy cm at low applied voltages. Remarkably, the molecular weight of PS does not significantly impact vertical phase separation, thin film morphology, or electrical properties. These findings are crucial for the development of high-performance OFETs and their application as X-ray detectors.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vertical Phase Separation in Blended Organic Semiconducting Films and Impact on Their Electrical and Direct X-Ray Detection Properties

  • Giglio, Maria Elisabetta
  • Colantoni, Elisabetta
  • Fratelli, Ilaria
  • Martínez Domingo, Carme
  • Martinez Zaragoza, Pedro
  • Napolitano, Giulia
  • Campari, Enrico
  • Branchini, Paolo
  • Basiricó, Laura
  • Tortora, Luca
  • Mas Torrent, Marta
Blends of small-molecule organic semiconductors (OSCs) and insulating polymers in Organic Field-Effect Transistors (OFETs) are mainly used to assist the solution-processing of OSCs, but they can also reduce interfacial charge traps due to vertical phase separation. Such charge traps are known to affect both the electrical response and radiation-induced charge collection capability in these devices. This study aims to optimize vertical phase separation in blend films of 1,4,8,11-tetramethyl-6,13-triethylsilylethynyl pentacene (TMTES) and polystyrene (PS) to minimize charge trap density at the semiconductor/dielectric interface, thereby enhancing the electrical performance and direct X-ray detection sensitivity in OFETs. A PS mass concentration of 33% is identified as optimal for achieving high-quality phase separation and favorable film morphology. This formulation led to films with reduced interfacial hole trap density and improved electrical and detection capacity, demonstrating a hole field-effect mobility of (1.3 ± 0.4) cm<sup>2</sup>V<sup>−1</sup> s<sup>−1</sup> and X-ray sensitivity of (5.6 ± 0.2) × 10<sup>3</sup> µC Gy<sup>−1</sup> cm<sup>−2</sup> at low applied voltages. Remarkably, the molecular weight of PS does not significantly impact vertical phase separation, thin film morphology, or electrical properties. These findings are crucial for the development of high-performance OFETs and their application as X-ray detectors., M.E.G., E.C., and I.F. contributed equally to this work. This work was funded by Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033/ERDF, UE with project SENSATION PID2022-141393OB-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2023-001263-S) and the Generalitat de Catalunya (2021-SGR-00443). M.E. acknowledges her FPI fellowship and is enrolled in the UAB Materials Science PhD program. L.B. and G.N. acknowledge the RELOAD project funded by Fondazione Cariplo and Fondazione CDP, Grant No. 2022–1834. I.F. received funding from the European Union's Horizon Europe research and innovation program under the Marie Skłodowska-Curie Actions grant agreement No 101105245. The Grant of Excellence Departments 2023–2027, MIUR (ARTICOLO 1, COMMI 314–337 LEGGE 232/2016), is gratefully acknowledged by L.T. The authors acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed