Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Interconnected Donor–Acceptor-Additive Effects on the Microstructure and Device Performance of PM6:Y6 Solar Cells

  • Gutiérrez Fernández, Edgar
  • Harillo-Baños, Albert
  • Solano, Eduardo
  • Bikondoa, Oier
  • Gutierrez, Junkal
  • Tercjak, Agnieszka
  • Campoy-Quiles, Mariano
  • Riera Galindo, Sergi
  • Martín, Jaime
[Abstract] The microstructure of the donor and acceptor materials within a bulk heterojunction is critical to the performance of organic solar cells, significantly influencing charge generation, transport, and overall efficiency and stability. Here, we studied the role of the donor[thin space (1/6-em)]:[thin space (1/6-em)]acceptor ratio and the use of additives on the resulting microstructure in films and devices based on PM6[thin space (1/6-em)]:[thin space (1/6-em)]Y6. A detailed study of the resulting structures, mainly by X-ray scattering, indicates that the molecular arrangement leading to higher efficiencies is correlated with the presence of a single, well-mixed phase. In this phase, the diffusion of the Y6 molecules is constrained within the PM6 matrix. Interestingly, this microstructure can be achieved either by tuning the composition or by incorporating a solvent additive. Consequently, either approach can be employed to enhance photovoltaic performance., J. M and E. G-F. acknowledge support from the European Union's Horizon 2020 research and innovation program, H2020-FETOPEN-01-2018-2020 “LION-HEARTED”, grant agreement no. 828984. J. M. thanks MICINN for the grant Ref. PID2021-126243NB-I00 and the European Research Council ERC-CoG with reference 101086805. We also acknowledge Ana Martinez Amesti, technician in Electron Microscopy at UPV/EHU, and the teams of the NCD-SWEET beamline at ALBA synchrotron and the XMaS/BM28 beamline at the European Synchrotron. XMaS is a UK national research facility supported by EPSRC. S. R.-G. is thankful to the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2020) for grant agreement no. 101025608, IDEAL. The authors also thank the financial support of the Spanish Ministerio de Ciencia, Innovación y Universidades, under Grants PID2021-128924OB-I00, TED2021-131911B-I00, and CEX2019-000917-S in the framework of the Spanish Severo Ochoa Centre of Excellence.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Combinatorial screening of wide band-gap organic solar cell materials with open-circuit voltage between 1.1 and 1.4

  • Casademont-Viñas, Miquel
  • Capolat, Daniel
  • Quesada-Ramírez, Arianna
  • Reinfelds, Matiss
  • Trimmel, Gregor
  • Sanviti, Matteo
  • Martín, Jaime
  • Goñi, Alejandro R.
  • Kirchartz, Thomas
  • Campoy-Quiles, Mariano
[Abstract]: Wide band-gap organic solar cells are gaining interest due to their applications in emergent light-harvesting technologies such as underwater photovoltaics, multi-junction solar cells, or indoor photovoltaics. In this work, a combinatorial screening approach is used to explore binary combinations of three wide band-gap donors (PTQ10, PM6, and D18) and three wide band-gap acceptors (PMI-FF-PMI, O-IDFBR, and IO-4Cl) deposited from solution in two solvents (CB and CF). In total, 18 combinations are blade-coated with active layers exhibiting a thickness gradient generating solar cells with 12 different thicknesses. PTQ10:IO-4Cl and PTQ10:O-IDFBR are the most efficient blends with efficiencies of 7.31% and 6.87%, respectively. The voltage loss analysis shows that PTQ10-based devices exhibit the lowest non-radiative voltage losses, whereby the PTQ10:O-IDFBR combination has the lowest voltage loss of all studied blends, with a remarkably high open-circuit voltage (Voc) of 1.35 V. Due to their high performance and Voc, PTQ10:O-IDFBR devices were also studied for indoor light harvesting, achieving an efficiency of 22.6% and a Voc of 1.21 V under 560 lux indoor illumination. To the best of our knowledge, this indoor Voc value is the highest achieved in the field of indoor organic photovoltaics., The Spanish “Ministerio de Ciencia e Innovación (MICINN)” is gratefully acknowledged for its support through grant No. CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) grants PGC2018-095411-B-I00 (RAINBOW), TED2021-131911B-I00, and PID2021-128924OB-I00 (ISOSCELLES). The authors also thank the Catalan agency AGAUR for grant 2021-SGR-00444. M. C. V. acknowledges an FPI fellowship (PRE2019-089855) from MICINN co-financed by the European Social Fund. M. C. V. and A. Q. also thank the PhD program in Materials Science from Universitat Autònoma de Barcelona in which both were enrolled. M. C. V. acknowledges Dr Benjamin Klingebiel and Mr Markus Hülsbeck for their help during EL and PL measurements, Mr Wilfried Reetz for his help during EQEPV measurements. Dr Markus Scharber is acknowledged for his insights in PMI-FF-PMI-based solar cells. Dr Alfonsina A. A. Torimtubun is acknowledged for her helpful discussions on device fabrication. M. R. and G. T. thank Birgit Ehmann, Colien Purkathofer, and Stefan Weber for synthesis of PMI-FF-PM, Generalitat de Catalunya; 2021-SGR-00444
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

On the Impact of Selective Donor:acceptor Structural Ordering in PBDB-T:ITIC Organic Solar Cells

  • Rodríguez-Martínez, Xabier
  • Marina, Sara
  • Harillo-Baños, Albert
  • Campoy-Quiles, Mariano
  • Martín, Jaime
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract]: The bulk heterojunction (BHJ) is the standard configuration of the photoactive layer in single-junction organic solar cells. Therein, electron-rich (a donor polymer) and electron deficient (a small molecule acceptor) organic semiconductors are intimately blended to form a complex 3D network of crystallites and vitrified regions that altogether determine the final device performance. Studying the relationship between said performance and the structural order achieved in the photoactive materials individually is desirable to discern the underlying structure–function relationship in organic solar cells, hence isolating, with no ambiguities, the role played by the structural order achieved in the donor and acceptor domains themselves on the device performance. This work precisely tackles the archetypal PBDB-T:ITIC blend to demonstrate how the structural order of the donor and acceptor fractions in the BHJ can be selectively tailored through an adequate selection of co-solvents during the film formation process. When using chloroform as unique solvent, both components exhibit a low degree of order in the BHJ. Conversely, the use of ortho-xylene yields BHJs in which PBDB-T shows enhanced structural order. Furthermore, the addition of 1,8-diiodooctane as co-solvent is found to spark the crystallization of ITIC without effect on the degree of order of PBDB-T, resulting in downgraded photovoltaic performance. Overall, BHJs in which ITIC remains in its vitrified state are beneficial, in which case the structural order achieved by PBDB-T has little to no effect. Notwithstanding, BHJs that contain ordered materials (donor and/or acceptor) show virtually no degradation after more than 3.5 years of shelf storage. This study, thus, pinpoints to (i) the microstructure attained by the acceptor domains and (ii) the presence of crystalline domains of either type (donor and/or acceptor) as the main determinants of the maximum achievable performance and the shelf stability of organic solar cells, respectively., J. M. and S. M. thank financial support from the MICIU (PID2021-126243NB-I00). J. M. and X. R.-M. acknowledge funding from the European Research Council (Grant 101086805). GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. M. C.-Q. and A. H.-B. acknowledge support by the MICIU/AEI/ 10.13039/501100011033 for the ‘‘Severo Ochoa’’ program for Centres of Excellence CEX2023-001263-S and grants PID2021- 128924OB-I00 and TED2021-131911B-I00. The authors acknowledge Universidade da Corun˜a/CISUG for the funding received for open access charge.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High Polymer Molecular Weight Yields Solar Cells with Simultaneously Improved Performance and Thermal Stability

  • Riera Galindo, Sergi
  • Sanz Lleó, Marta
  • Gutiérrez Fernández, Edgar
  • Ramos, Nicolás
  • Mas Torrent, Marta
  • Martín, Jaime
  • López Mir, Laura
  • Campoy Quiles, Mariano
Simple synthetic routes, high active layer thickness tolerance as well as stable organic solar cells are relentlessly pursued as key enabling traits for the upscaling of organic photovoltaics. Here, the potential to address these issues by tuning donor polymer molecular weight is investigated. Specifically, the focus is on PTQ10, a polymer with low synthetic complexity, with number average molecular weights of 2.4, 6.2, 16.8, 52.9, and 54.4 kDa, in combination with three different non-fullerene acceptors, namely Y6, Y12, and IDIC. Molecular weight, indeed, unlocks a threefold increase in power conversion efficiency for these blends. Importantly, efficiencies above 10% for blade coated devices with thicknesses between 200 and 350 nm for blends incorporating high molecular weight donor are shown. Spectroscopic, GIWAXS and charge carrier mobility data suggest that the strong photocurrent improvement with molecular weight is related to both, improved electronic transport and polymer contribution to exciton generation. Moreover, it is demonstrated that solar cells based on high molecular weight PTQ10 are more thermally stable due to a higher glass transition temperature, thus also improving device stability., The authors are grateful to 1-Material for providing custom molecular weight PTQ10 polymer and for the fruitful discussions. S.R.-G. is thankful to the Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2020) for grant agreement No. 101025608, IDEAL; for the financial support provided by Ajuntament de Barcelona and the Ministeri de Ciència i Innovació within the framework of Barcelona Capital Cultural i Científic, through the project Bus Stop Integrated Organic Photovoltaic (TERRA) (22S09542-001). The authors acknowledge Dr. Bernhard Dörling for building the electronic controller of the accelerated blade coater and Dr. M. Gibert-Roca for designing the corresponding multiplexor. M.C.-Q. thanks to the Spanish Ministry of Science and Innovation for funding through projects PID2021-128924OB-I00 and TED2021-131911B-I00. This work was supported by the MADRAS project funded from the European Union Horizon 2020 research and innovation programme under grant agreement No. 862492. .This work was also funded by MCIN/AEI/10.13039/501100011033/ERDF,UE with projects GENESIS PID2019-111682RB-I00 and SENSATION PID2022-141393OB-I00, and through the “Severo Ochoa” Programme for Centers of Excellence in R&D (FUNFUTURE CEX2019-000917-S)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the Electron-Deficient Central Core on Fused-Ring Nonfullerene Acceptors: Deciphering the Relationships Between Structure, Property, and Photovoltaic Performance

  • Suárez Blas, Fátima
  • Pandolfi, Lorenzo
  • Alonso Navarro, Matías J.
  • Riera Galindo, Sergi
  • Martínez, José I.
  • Dörling, Bernhard
  • Funes, Alejandro
  • Harillo Baños, Albert
  • Venuti, Elisabetta
  • Ramos, María Mar
  • Campoy Quiles, Mariano
  • Segura, José L.
In the field of organic solar cells, organic semiconductors with Y6-based chemical structure and their corresponding quinoxaline-based assemblies are settled down as promising materials in the field of OSCs. However, the chemical structure of Y6 derivatives does not allow an expansion in the electron-withdrawing central core, in contrast to their quinoxaline-based analogues. For this reason, herein, two different quinoxaline-based A–D–A′–D–A derivatives with 2D π-extended cores endowed with electroactive rylenimide moieties, named as Y6-1Napht and Y6-1Pery, are designed and synthesized. These enlarged fused-ring electron acceptors (FREAs) allow to study the influence of the length of the ryleneimide moiety on its structural, optical, electrochemical, and thermal properties as well as the tailoring of the frontier molecular orbitals. These results are also supported by quantum chemical calculations and photoluminescence measurements that provide additional information about their thermal stability and the microstructure of the films. Finally, as a proof of concept and to study the influence of these chemical modifications on the central core, solar cells based on these π-conjugated nonfullerene acceptors are fabricated., This work was financially supported by the Spanish Ministry of Science and Innovation (grant nos. PID2022-138908NB-C33, PID2021-128924OB-I00, PID2020-113142RB-C21, PLEC2021-007906, TED2021-131911B-I00, TED2021-129886B-C43, and TED2021-129416A-I00) and the Complutense University of Madrid (INV.GR.00.1819.10759). F.S.B. and M.J.A.N. gratefully acknowledge Universidad Rey Juan Carlos for their predoctoral and postdoctoral contracts. L.P. acknowledges funding by the “Toso Montanari” scholarship N.3280 (ID 1887). S.R.G. is thankful to Marie Sklodowska-Curie Actions (H2020-MSCA-IF-2020) for Grant Agreement No. 101025608, IDEAL. J.I.M. also acknowledges funding from Comunidad de Madrid (grant nos. S2018/NMT-4367 and Y2020/NMT-6469)., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combinatorial screening of wide band-gap organic solar cell materials with open-circuit voltage between 1.1 and 1.4 V

  • Casademont Viñas, Miquel
  • Capolat, Daniel
  • Quesada Ramírez, Arianna
  • Reinfelds, Matiss
  • Trimmel, Gregor
  • Sanviti, Matteo
  • Martín, Jaime
  • Goñi, Alejandro R.
  • Kirchartz, Thomas
  • Campoy Quiles, Mariano
Wide band-gap organic solar cells are gaining interest due to their applications in emergent light-harvesting technologies such as underwater photovoltaics, multi-junction solar cells, or indoor photovoltaics. In this work, a combinatorial screening approach is used to explore binary combinations of three wide band-gap donors (PTQ10, PM6, and D18) and three wide band-gap acceptors (PMI-FF-PMI, O-IDFBR, and IO-4Cl) deposited from solution in two solvents (CB and CF). In total, 18 combinations are blade-coated with active layers exhibiting a thickness gradient generating solar cells with 12 different thicknesses. PTQ10:IO-4Cl and PTQ10:O-IDFBR are the most efficient blends with efficiencies of 7.31% and 6.87%, respectively. The voltage loss analysis shows that PTQ10-based devices exhibit the lowest non-radiative voltage losses, whereby the PTQ10:O-IDFBR combination has the lowest voltage loss of all studied blends, with a remarkably high open-circuit voltage (Voc) of 1.35 V. Due to their high performance and Voc, PTQ10:O-IDFBR devices were also studied for indoor light harvesting, achieving an efficiency of 22.6% and a Voc of 1.21 V under 560 lux indoor illumination. To the best of our knowledge, this indoor Voc value is the highest achieved in the field of indoor organic photovoltaics., The Spanish “Ministerio de Ciencia e Innovaci´ on (MICINN)” is gratefully acknowledged for its support through grant No. CEX2019-000917-S (FUNFUTURE) in the framework of the Spanish Severo Ochoa Centre of Excellence program and the AEI/FEDER(UE) grants PGC2018-095411-B-I00 (RAINBOW), TED2021-131911B-I00, and PID2021-128924OB-I00 (ISOSCELLES). The authors also thank the Catalan agency AGAUR for grant 2021-SGR-00444. M. C. V. acknowledges an FPI fellowship (PRE2019-089855) from MICINN co-nanced by the European Social Fund. M. C. V. and A. Q. also thank the PhD program in Materials Science from Universitat Aut` onoma de Barcelona in which both were enrolled. M. C. V. acknowledges Dr Benjamin Klingebiel and Mr Markus Hülsbeck for their help during EL and PL measurements, Mr Wilfried Reetz for his help during EQEPVmeasurements. Dr Markus Scharber is acknowledged for his insights in PMI-FF-PMI-based solar cells. Dr Alfonsina A. A. Torimtubun is acknowledged for her helpful discussions on device fabrication. M. R. and G. T. thank Birgit Ehmann, Colien Purkathofer, and Stefan Weber for synthesis of PMI-FF-PMI., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Throughput Screening of Low-Bandgap Organic Semiconductors for Photovoltaic Applications: In the Search of Correlations

  • Torimtubun, Alfonsina Abat Amelenan
  • Alonso Navarro, Matías Jesús
  • Quesada Ramírez, Arianna
  • Rodríguez Martínez, Xabier
  • Segura, José L.
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
Low-bandgap nonfullerene acceptors (NFAs) offer a unique potential for photovoltaic (PV) applications, such as transparent PV and agrivoltaics. Evaluating each new PV system to achieve the optimum thickness, microstructure, and device performance is, however, a complex multiparametric challenge with large time and resource requirements. Herein, the PV potential of low-bandgap donor and NFA materials by combining high-throughput screening and statistical methods is evaluated. The use of thickness gradients (20–600 nm) facilitates the fabrication of more than 2000 doctor-bladed devices from 24 different low-bandgap blend combinations. The corresponding power conversion efficiencies varies significantly, from 0.06% to 10.45% across materials and thicknesses. The self-consistency of the large dataset allows to perform a parameter sensitivity study as well as parameter correlation analysis. These reveal that the choice of materials and energy alignment-related features (i.e., electron affinity offset, ionization energy offset, bandgap, and energy loss) has the largest influence on final device performance, while processing conditions appear less important for the final efficiencies. Our study demonstrates that high-throughput experimentation is a perfect match for correlation analyses in order to gain a statistically meaningful understanding of these systems, potentially accelerating the discovery of new materials., The authors acknowledge financial support from the Spanish Ministerio de Ciencia e Innovación under grant PID2021-128924OB-I00 in the framework of the Spanish R&D program Generacion de Conocimiento 2021, TED2021-131911B-I00, and CEX2019-000917-S in the framework of the Spanish Severo Ochoa Centre of Excellence. X.R.-M. acknowledges the Alexander von Humboldt Foundation for funding his postdoctoral fellowship., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Film thickness dependence of nanoscale arrangement of a chiral electron donor in its blends with an achiral electron acceptor

  • Pancotti, Giulia
  • Killalea, C. Elizabeth
  • Rees, Thomas W.
  • Liirò-Peluso, Letizia
  • Riera Galindo, Sergi
  • Beton, Peter H.
  • Campoy Quiles, Mariano
  • Siligardi, Giuliano
  • Amabilino, David B.
The nanoscale chiral arrangement in a bicomponent organic material system comprising donor and acceptor small molecules is shown to depend on the thickness of a film that is responsive to chiral light in an optoelectronic device. In this bulk heterojunction, a previously unreported chiral bis(diketopyrrolopyrrole) derivative was combined with an achiral non-fullerene acceptor. The optical activity of the chiral compound is dramatically different in the pure material and the composite, showing how the electron acceptor influences the donor's arrangement compared with the pure molecule. Mueller matrix polarimetric imaging shows the authenticity of this effect and the homogeneity of short range chiral orientations between the molecules, as well as more heterogeneous short and longer range arrangements in the films observed in linear dichroic and birefringent effects. The two-dimensional circular dichroism (CD) maps and spectra show the uniformity of the short range supramolecular interactions both in spun-cast films on quartz and blade-coated films on photovoltaic device substrates, where evidence for the chiral arrangement is uniquely provided by the synchrotron CD measurements. The external quantum efficiency of the devices depends upon the handedness of the light used to excite them and the film thickness, that influences the supramolecular arrangement and organization in the film, and determines the selectivity for left or right circularly polarised light. The difference in external quantum efficiency of the photovoltaic devices between the two handedness' of light correlates with the apparent differential absorbance (g-factor) of the films., We thank most warmly Dr Flavia Pop for preliminary syntheses of asymmetric DPP monomers and Dr Christopher Mellor for the VASE data analysis. We are grateful to the University of Nottingham through the Propulsion Futures Beacon of Excellence, the MICIU/AEI/10.13039/501100011033 for the “Severo Ochoa” program for Centres of Excellence CEX2019-000917-S and CEX2023-001263-S as well as project TED2021-131911B-I00, and the EPSRC through the LDMI DTP under grant EP/R513283/1. DBA thanks the MICIU/AEI PID2021-123873NB-I00 and the Agència de Gestió d'Ajuts Universitaris i de Recerca (AGAUR), Grant 2021SGR01085. GP thanks La Caixa Foundation for a predoctoral contract (ID 100010434, code LCF/BQ/DI23/11990066). MCQ and SR acknowledge funding from the European Union through Marie Curie IDEAL, with grant reference 101025608. We thank Dr Markos Paradinas from the ICMAB Scanning Probe Microscopy Laboratory for the AFM images along the gradient of the solar cells. We also thank Dr Sebastian Reparaz for his help with the setup of the EQE measurements. We warmly thank Dr Martin Kreuzer at BL01–MIRAS beamline of ALBA synchrotron for IR measurements. The Diamond Light Source Ltd (beamline B23) is thanked for providing beamtime (SM30198) and Drs T.-M. Gianga and T. Jávorfi for beamline assistance., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S). With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the impact of selective donor:acceptor structural ordering in PBDB-T:ITIC organic solar cells

  • Rodríguez Martínez, Xabier
  • Marina, Sara
  • Harillo Baños, Albert
  • Campoy Quiles, Mariano
  • Martin, Jaime
The bulk heterojunction (BHJ) is the standard configuration of the photoactive layer in single-junction organic solar cells. Therein, electron-rich (a donor polymer) and electron deficient (a small molecule acceptor) organic semiconductors are intimately blended to form a complex 3D network of crystallites and vitrified regions that altogether determine the final device performance. Studying the relationship between said performance and the structural order achieved in the photoactive materials individually is desirable to discern the underlying structure-function relationship in organic solar cells, hence isolating, with no ambiguities, the role played by the structural order achieved in the donor and acceptor domains themselves on the device performance. This work precisely tackles the archetypal PBDB-T:ITIC blend to demonstrate how the structural order of the donor and acceptor fractions in the BHJ can be selectively tailored through an adequate selection of co-solvents during the film formation process. When using chloroform as unique solvent, both components exhibit a low degree of order in the BHJ. Conversely, the use of ortho-xylene yields BHJs in which PBDB-T shows enhanced structural order. Furthermore, the addition of 1,8-diiodooctane as co-solvent is found to spark the crystallization of ITIC without effect on the degree of order of PBDB-T, resulting in downgraded photovoltaic performance. Overall, BHJs in which ITIC remains in its vitrified state are beneficial, in which case the structural order achieved by PBDB-T has little to no effect. Notwithstanding, BHJs that contain ordered materials (donor and/or acceptor) show virtually no degradation after more than 3.5 years of shelf storage. This study, thus, pinpoints to (i) the microstructure attained by the acceptor domains and (ii) the presence of crystalline domains of either type (donor and/or acceptor) as the main determinants of the maximum achievable performance and the shelf stability of organic solar cells, respectively., J. M. and S. M. thank financial support from the MICIU (PID2021-126243NB-I00). J. M. and X. R.-M. acknowledge funding from the European Research Council (Grant 101086805). GIWAXS experiments were performed at NCD-SWEET beamline at ALBA Synchrotron with the collaboration of ALBA staff. M. C.-Q. and A. H.-B. acknowledge support by the MICIU/AEI/10.13039/501100011033 for the “Severo Ochoa” program for Centres of Excellence CEX2023-001263-S and grants PID2021-128924OB-I00 and TED2021-131911B-I00. The authors acknowledge Universidade da Coruña/CISUG for the funding received for open access charge., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

What Makes Thickness-Tolerant Organic Solar Cells?

  • Rodríguez Martínez, Xabier
  • Tormann, Constantin
  • Sanz Lleó, Marta
  • Dörling, Bernhard
  • Gibert Roca, Martí
  • Harillo Baños, Albert
  • Torimtubun, Alfonsina Abat Amelenan
  • Pascual San José, Enrique
  • Jurado, José Piers
  • López Mir, Laura
  • Kemerink, Martijn
  • Campoy Quiles, Mariano
Relatively thick-film organic photovoltaics (OPVs) are desirable to spark commercialization through mass-printing methods. Thickness-resilient donor:acceptor blends are, however, scarce and not fully understood. The interplay between electronic, optical, and microstructural properties of the photoactive layer (PAL) generates a multi-parametric space where rationalization is far from trivial. In this work, high-throughput experimentation, simulations, and machine learning (ML) methods are leveraged to provide material and device insights toward thickness-resilient OPVs. From a database of 720 inverted devices and 20 different donor:acceptor blends, two main blend families are identified in terms of their resilience against increased PAL thickness (>200 nm). These are archetypically represented by PBDB-T:ITIC (thickness-sensitive) and PTQ10:Y6 (thickness-resilient). Kinetic Monte Carlo (kMC) simulations elucidate that the blend morphology alone, either in the form of an effective medium or energy cascade, can explain the experimental short-circuit current density and open-circuit voltage trends without tweaking the recombination parameters (cf. drift-diffusion, DD). High fill factors (FFs) in thick-film devices cannot, however, be reproduced by the kMC or DD simulations. ML models show that complementary absorbing donors and acceptors (shifted absorption onsets) mixed in balanced weight ratios provide a favorable hole back-transfer efficiency to increase the FF in thick-film devices., The authors acknowledge Prof. Martin Heeney and Dr. Zhuping Fei for the synthesis of ITIC-C8 and ITIC-C2C6 in a previous work. This work was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades under Grants PID2021-128924OB-I00, TED2021-131911B-I00 and CEX2019-000917-S in the framework of the Spanish Severo Ochoa Centre of Excellence. The authors acknowledge financial support from the European Research Council through project ERC CoG 648901. This work was supported by the MADRAS project funded by the European Union Horizon 2020 research and innovation program under grant agreement No. 862492. X.R.M. acknowledges the Alexander von Humboldt Foundation for funding. J.P.J. has received financial support through the “la Caixa” INPhINIT Fellowship Grant (Grant code: LCF/BQ/IN17/11620035). M.K. thanks the Carl Zeiss Foundation for financial support. The authors thank all past and present FOREMATICS for fruitful discussions., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analysis of the degradation mechanisms in roll-to-roll P3HT-based organic photovoltaic modules

  • Adel, Rana
  • Grüne, Jeannine
  • Klotz, Jannis
  • Stella, Marco
  • Dyakonov, Vladimir
  • Campoy Quiles, Mariano
  • Sperlich, Andreas
  • Martínez Ferrero, Eugenia
Solution-processed organic solar modules offer a promising approach for low-cost and flexible organic photovoltaic (OPV) technology. However, one of the key challenges of these devices is the degradation of materials over time, leading to overall limited module stability, which ultimately results in a decrease in efficiency. In this study, the environmental degradation mechanisms of roll-to-roll slot-die organic solar modules have been investigated by means of photovoltaic, spectroscopic and electron paramagnetic resonance (EPR) measurements. The degradation of modules based on blends of P3HT with PC61BM fullerene or with non-fullerene o-IDTBR acceptors has been analyzed following the ISOS-L-1 protocol. Moreover, two different encapsulating materials have also been studied. Our results indicate that the fullerene acceptor provides better stabilization to the donor polymer than the non-fullerene acceptor. Additionally, oxygen diffusion affects not only the photoactive layer components but also the hole transport layer. Finally, the encapsulation with adequate materials, such as a barrier foil offering UV protection, allows for longer lifetimes., All the authors acknowledge financial support from the European Commission through the Horizon 2020 Marie Sklodowska-Curie ITN Programme, SEPOMO, Grant Number: 722651. MCQ thanks the Ministry of Science and Education of Spain and the European Union NextGenerationEU/PRTR for funding through grant TED2021-131911B-I00 and PLEC2022-009323., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed