Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Comparing the microstructure and photovoltaic performance of 3 perylene imide acceptors with similar energy levels but different packing tendencies

  • Adel, Rana
  • Gala, Elena
  • Alonso-Navarro, Matías J.
  • Gutiérrez Fernández, Edgar
  • Martín Pérez, Jaime
  • Stella, Marco
  • Martinez-Ferrero, Eugenia
  • De la Peña, Alejandro
  • Harbuzaru, Alexandra
  • Ramos, M. Mar
  • Ponce Ortiz, Rocío
  • Segura, José L.
  • Campoy Quiles, Mariano
While it is widely recognized that microstructure plays an important role in the performance of organic photovoltaics (OPV), systematic studies are often challenging, as varying the molecular packing through typical chemical means (such as sidechain tuning) often affects the molecular energy levels, thus preventing a clear correlation. In this work we present the synthesis of three perylene imide (PI) based electron acceptors with almost identical energy levels, but distinct packing tendencies. We confirm our initial hypothesis by measuring solution and solid-state absorption, and cyclic voltammetry as well as characterizing the films by grazing incidence wide angle X-ray scattering (GIWAXS). In a second step, we repeat the characterization of the three materials in blends with two polymer donors, namely PCDTBT or PBDBT, whose energy levels are well aligned with those of the PI acceptors, and which, additionally, exhibit different degrees of structural order. We show how the initial strong difference between acceptors is partially blurred in blends, but still critical. Finally, we correlate our structural data with OPV devices made with the corresponding six blends. Our data suggest that a good donor acceptor marriage should ensure good energy alignment but also exhibit complementary crystallization tendencies of the two components., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa Program for Centers of Excellence in R&D (No. CEX2019-000917-S), and projects PGC2018-095411-B-I00, PID2019-106268GB-C33 and PID2019-110305GB-I00, as well as the European Commission through the Horizon 2020 Marie Sklodowska-Curie ITN Programme, SEPOMO, Grant Number: 722651, and the UCM (INV.GR.00.1819.10759). E. G. specially acknowledges Comunidad de Madrid and Universidad Complutense de Madrid for a post-doctoral contract (CT20/19-CT21/19/PEJD-2018-POST/IND-8661PAI). M. J. A. N. acknowledges URJC for a post-doctoral contract. R. P. O. and A. H. also acknowledge support from Junta de Andalucia (project UMA18-FEDERJA-080). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). Dedicated to the memory of our friend and colleague Prof. Alasdair Campbell.
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Comparing the Microstructure and Photovoltaic Performance of 3 Perylene Imide Acceptors With Similar Energy Levels but Different Packing Tendencies

  • Adel, Rana
  • Gala, Elena
  • Alonso Navarro, Matías Jesús
  • Gutiérrez Fernández, Edgar
  • Martín, Jaime
  • Stella, Marco
  • Martínez-Ferrero, Eugenia
  • De la Peña, Alejandro
  • Harbuzaru Harbuzaru, Alexandra
  • Ramos, M.Mar
  • Ponce Ortiz, Rocío
  • Segura, José L.
  • Campoy-Quiles, Mariano
[Abstract] While it is widely recognized that microstructure plays an important role in the performance of organic photovoltaics (OPV), systematic studies are often challenging, as varying the molecular packing through typical chemical means (such as sidechain tuning) often affects the molecular energy levels, thus preventing a clear correlation. In this work we present the synthesis of three perylene imide (PI) based electron acceptors with almost identical energy levels, but distinct packing tendencies. We confirm our initial hypothesis by measuring solution and solid-state absorption, and cyclic voltammetry as well as characterizing the films by grazing incidence wide angle X-ray scattering (GIWAXS). In a second step, we repeat the characterization of the three materials in blends with two polymer donors, namely PCDTBT or PBDBT, whose energy levels are well aligned with those of the PI acceptors, and which, additionally, exhibit different degrees of structural order. We show how the initial strong difference between acceptors is partially blurred in blends, but still critical. Finally, we correlate our structural data with OPV devices made with the corresponding six blends. Our data suggest that a good donor acceptor marriage should ensure good energy alignment but also exhibit complementary crystallization tendencies of the two components., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa Program for Centers of Excellence in R&D (No. CEX2019-000917-S), and projects PGC2018-095411-B-I00, PID2019-106268GB-C33 and PID2019-110305GB-I00, as well as the European Commission through the Horizon 2020 Marie Sklodowska-Curie ITN Programme, SEPOMO, Grant Number: 722651, and the UCM (INV.GR.00.1819.10759). E. G. specially acknowledges Comunidad de Madrid and Universidad Complutense de Madrid for a post-doctoral contract (CT20/19-CT21/19/PEJD-2018-POST/IND-8661PAI). M. J. A. N. acknowledges URJC for a post-doctoral contract. R. P. O. and A. H. also acknowledge support from Junta de Andalucía (project UMA18-FEDERJA-080). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI), Universidad Complutense de Madrid; INV.GR.00.1819.10759, Universidad Complutense de Madrid; CT20/19-CT21/19/PEJD-2018-POST/IND-8661PAI, Junta de Andalucía; UMA18-FEDERJA-080
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Blade coated P3HT:non-fullerene acceptor solar cells: a high-throughput parameter study with a focus on up-scalability

  • Pascual San José, Enrique
  • Rodríguez Martínez, Xabier
  • Adel Abdelaleim, Rana
  • Stella, Marco
  • Martínez Ferrero, Eugenia
  • Campoy Quiles, Mariano
Combining non-fullerene acceptors (NFAs) with novel low band gap polymers has led to very promising performances. However, research on donors that can reduce the performance–cost gap, such as poly(3-hexylthiophene) (P3HT), can play an instrumental role in the upscaling of this technology. In this paper, we have analysed the influence of several processing parameters on the performance of solar cells based on P3HT:NFA binaries deposited by blade coating. The investigated NFAs include molecules with variations in the side chains and end-capping groups. More precisely, we have looked at devices based on P3HT blended with five NFAs, namely ITIC, ITIC-M, O-IDTBR, EH-IDTBR, and O-IDFBR, and employed PC60BM and ICBA as reference acceptors. More than one thousand doctor-bladed P3HT:NFA samples were manufactured using high throughput techniques using gradients of both thickness and annealing temperature. The combined data for all samples were employed to perform a parameter sensitivity study in order to identify the most influential parameters for P3HT based devices. For all material combinations, we have found that blade coated solar cells fabricated from chlorobenzene/dichlorobenzene mixtures outperform those based on chlorobenzene. For the most promising binary (i.e. P3HT:O-IDTBR), we have investigated in more depth the effects resulting from the choice of solvent, as well as casting temperature and post-deposition thermal annealing. Devices with power conversion efficiencies greater than 5% were obtained regardless of the casting temperature and for a relatively wide thickness range (80–250 nm). Finally, we have shown that encapsulated devices exhibit a stable performance for more than 3000 h and that degradation progresses faster in thicker devices. O-IDTBR has been identified to play a major role in the device degradation., This work was supported by the Spanish Ministerio de Economía y Competitividad (MINECO) under Grants MAT2015-70850-P, PGC2018-095411-B-I00 and SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence, the EURECAT Technology Centre, European Research Council through project ERC CoG648901 and H2020 Marie Curie actions through the SEPOMO project (Grant number 722651). We are also very thankful to Mr Fernando Gallegos for manufacturing the metallic holder, Mr Martí Gibert for the useful multiplexer/switcher design, Dr Bernhard Dörling for designing the doctor blade controller, Mr Adrián Francisco for helping with Raman fittings and Dr Marta Riba, Mrs Marta Gerbolés, Mrs Anna Crespí and Mr Andrés Gómez for helping with contact angle, XRD and AFM measurements, respectively. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards photovoltaic windows: scalable fabrication of semitransparent modules based on non-fullerene acceptors via laser-patterning

  • Pascual San José, Enrique
  • Sadoughi, Golnaz
  • Lucera, Luca
  • Stella, Marco
  • Martínez Ferrero, Eugenia
  • Morse, Graham Edward
  • Campoy Quiles, Mariano
  • Burgués Ceballos, Ignasi
Semitransparent organic photovoltaics (OPV) possess unique properties that make them highly appealing for their integration into semitransparent architectonic elements such as windows or glazings. In order to provide sufficient transparency, non-opaque electrodes and thin photoactive layers are typically used, thus limiting the light-harvesting capacity. This can be partially overcome by using materials that absorb light mostly in the infrared region. On the other hand, the use of scalable techniques for the fabrication of semitransparent devices is often disregarded. In this work, we combine the blue, low-bandgap polymer PBTZT-stat-BDTT-8 with the near-infrared absorbing non-fullerene acceptor 4TICO, adapting the module fabrication to low-cost manufacturing processes that are compatible with large-scale production. Fully solution-processed semitransparent solar cells over 4.7% performance are prepared from non-chlorinated formulations, in air and using scalable techniques such as blade coating. Our prototypes of semitransparent laser-patterned OPV modules exceed 30% of transparency (measured as human perception transmittance, HPT) and yield efficiencies in the range of 4%, geometrical fill factors surpassing 90% and an active area above 1 cm2. We verify the quality of cell-to-cell interconnection and optimise the geometry of the modules with the help of local optoelectronic imaging techniques. This work highlights the relevance of non-fullerene acceptors with strong absorption in the near-infrared, as they can meet industrial and technical requirements for the upscaling and integration of high-performance semitransparent OPV modules with low production costs., This work was supported by the Spanish Ministerio de Economía y Competitividad (MINECO) under Grant PGC2018-095411-B-I00 and No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence and by EURECAT Technological Centre. We acknowledge financial support from European Research Council through project ERC CoG 648901 and H2020 Marie Curie actions through the SEPOMO project (Grant number 722651). E.P.-S.-J. wants to thank Mr Pierluigi Mondelli for his help in the laser patterning experimental setup and Mrs Léa Silvestre for her help manufacturing devices. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of Nanomorphology on Surface Doping of Organic Semiconductors: The Pentacene−C60F48 Interface

  • Silvestri, Francesco
  • Prieto, Mauricio J.
  • Babuji, Adara
  • Tănase, Liviu C.
  • Caldas, Lucas de Souza
  • Solomeshch, Olga
  • Schmidt, Thomas
  • Ocal, Carmen
  • Barrena, Esther
Establishing the rather complex correlation between the structure and the charge transfer in organic−organic heterostructures is of utmost importance for organic electronics and requires spatially resolved structural, chemical, and electronic details. Insight into this issue is provided here by combining atomic force microscopy, Kelvin probe force microscopy, photoemission electron microscopy, and low-energy electron microscopy for investigating a case study. We select the interface formed by pentacene (PEN), benchmark among the donor organic semiconductors, and a p-type dopant from the family of fluorinated fullerenes. As for Buckminsterfullerene (C60), the growth of its fluorinated derivative C60F48 is influenced by the thickness and crystallinity of the PEN buffer layer, but the behavior is markedly different. We provide a microscopic description of the C60F48/PEN interface formation and analyze the consequences in the electronic properties of the final heterostructure. For just one single layer of PEN, a laterally complete but noncompact C60F48/PEN interface is created, importantly affecting the surface work function. Nonetheless, from the very beginning of the second layer formation, the presence of epitaxial and nonepitaxial PEN domains dramatically influences the growth dynamics and extremely well packed two-dimensional C60F48 islands develop. Insightful elemental maps of the C60F48/PEN surface spatially resolve the nonuniform distribution of the dopant molecules, which leads to a heterogeneous work function landscape., This work has been supported by the Spanish government under the projects MAT2016-77852-C2-1-R (AEI/FEDER, UE) and the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496) and by the European Union’s Horizon 2020 Research and Innovation Program under grant Agreement No. 730872 and the Marie Skłodowska-Curie Grant Agreement No. 722651 (SEPOMO project). We also acknowledge the Generalitat de Catalunya grant 2017 SGR668. F.S. has been developing this work as part of his doctorate in Materials Science at the Universitat Autonoma de Barcelona (UAB). The SMART instrument was ̀ financially supported by the Federal German Ministry of Education and Research (BMBF) under the contract 05 KS4WWB/4, as well as by the Max-Planck Society. We thank the Helmholtz-Center Berlin for Materials and Energy (HZB) for the allocation of beamtime 192-08486-ST. L.d.S.C. is grateful for the funding through the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) under Germany′s Excellence StrategyEXC 2008390540038 (UniSysCat). O.S. acknowledges the support from the Israel Ministry of Science, the Center for Absorption in Science of the Ministry of Immigrant Absorption, the Committee for Planning and budgeting of the Council for Higher Education under the framework of the KAMEA Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the organic semiconductor side groups on the structural and electronic properties of their interface with dopants

  • Babuji, Adara
  • Silvestri, Francesco
  • Pithan, Linus
  • Richard, Audrey
  • Geerts, Yves Henry
  • Tessler, Nir
  • Solomeshch, Olga
  • Ocal, Carmen
  • Barrena, Esther
Two derivatives of [1]benzothieno[3,2-b][1]benzothiophene (BTBT), namely, 2,7-dioctyl-BTBT (C8-BTBT) and 2,7-diphenyl-BTBT (DPh-BTBT), belonging to one of the best performing organic semiconductor (OSC) families, have been employed to investigate the influence of the substitutional side groups on the properties of the interface created when they are in contact with dopant molecules. As a molecular p-dopant, the fluorinated fullerene C60F48 is used because of its adequate electronic levels and its bulky molecular structure. Despite the dissimilarity introduced by the OSC film termination, dopant thin films grown on top adopt the same (111)-oriented FCC crystalline structure in the two cases. However, the early stage distribution of the dopant on each OSC film surface is dramatically influenced by the group side, leading to distinct host–dopant interfacial morphologies that strongly affect the nanoscale local work function. In this context, Kelvin probe force microscopy and photoelectron emission spectroscopy provide a comprehensive picture of the interfacial electronic properties. The extent of charge transfer and energy level alignment between OSCs and dopant are debated in light of the differences in the ionization potential of the OSC in the films, the interface nanomorphology, and the electronic coupling with the substrate., This work has been funded by the Spanish Government through projects PID2019-110907GB-I00, MAT2016-77852-C2-1-R (AEI/FEDER, UE), and the “Severo Ochoa” Programme for Centers of Excellence in R&D (CEX2019-000917-S). We thank the 2017-SGR668 recognition. A.B. thanks the Spanish Government financial support through BES-2016-077519 FPI fellowship. F.S. acknowledges the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 730872 and the Marie Skłodowska-Curie grant agreement no. 722651 (SEPOMO project). This work has been carried out within the framework of the doctoral program (PhD) of Material Science (Department of Physics) of the Universitat Autònoma de Barcelona (UAB). O.S. acknowledges the support of the Israel Ministry of Science, the Center for Absorption in Science of the Ministry of Immigrant Absorption, the Committee for Planning and budgeting of the Council for Higher Education under the framework of the KAMEA Program. Y.H.G. is thankful to the Belgian National Fund for Scientific Research (FNRS) for financial support through research projects BTBT no. 2.4565.11, Phasetrans no. T.0058.14, Pi-Fast no. T.0072.18, and 2Dto3D no. 30489208. Financial supports from the French Community of Belgian (ARC no. 20061) are also acknowledged. A.R. acknowledges doctoral fellowship support from the FRIA. We thank the European Synchrotron Radiation Facility (ESRF) for providing access to ID03 for the time of the experiment. We are indebted to G. Sauthier from the ICN2 Photoemission Spectroscopy Facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Predicting the photocurrent–composition dependence in organic solar cells

  • Rodríguez Martínez, Xabier
  • Pascual San José, Enrique
  • Fei, Zhuping
  • Heeney, Martin
  • Guimerà, Roger
  • Campoy Quiles, Mariano
Dataset complementario en Digital.CSIC: https://digital.csic.es/handle/10261/223231 (10.20350/digitalCSIC/12719), The continuous development of improved non-fullerene acceptors and deeper knowledge of the fundamental mechanisms governing performance underpin the vertiginous increase in efficiency witnessed by organic photovoltaics. While the influence of parameters like film thickness and morphology are generally understood, what determines the strong dependence of the photocurrent on the donor and acceptor fractions remains elusive. Here we approach this problem by training artificial intelligence algorithms with self-consistent datasets consisting of thousands of data points obtained by high-throughput evaluation methods. Two ensemble learning methods are implemented, namely a Bayesian machine scientist and a random decision forest. While the former demonstrates large descriptive power to complement the experimental high-throughput screening, the latter is found to predict with excellent accuracy the photocurrent–composition phase space for material systems outside the training set. Interestingly, we identify highly predictive models that only employ the materials band gaps, thus largely simplifying the rationale of the photocurrent–composition space., This work was supported by the Spanish Ministerio de Ciencia e Innovación under Grants PGC2018-095411-B-I00, FIS2016-78904-C3-1-P, and SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence. We acknowledge financial support from the European Research Council through project ERC CoG 648901 and the H2020 Marie Curie actions through the SEPOMO project (grant number 722651). X. R.-M., E. P.-S.-J. and M. C.-Q. thank Dr Bernhard Dörling for designing the doctor blade controller and Mr Martí Gibert-Roca for designing the multiplexer/switcher. X. R.-M. acknowledges the departments of Physics, Chemistry and Geology of the Autonomous University of Barcelona (UAB) as coordinators of the PhD program in Materials Science. M. H. acknowledges the Royal Society and the Wolfson Foundation. The authors thank Dr Mathieu Linares and Dr Jasper Michels for inspiring discussions at the early stages of this work. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design Dependence of the Interface Structure and Crystalline Order of Organic Semiconductor/Dopant Heterojunctions: Pentacene/C60F48

  • Silvestri, Francesco
  • Linus Pithan
  • Babuji, Adara
  • Ocal, Carmen
  • Barrena, Esther
Planar and mixed heterojunctions are the common architectures respectively used for contact and bulk doping in organic electronics. Beyond the success of empirical methods, knowing how the incorporation of dopant molecules affects the structural properties of the organic semiconductor film is essential for the design optimization of devices with efficient electrical properties. With this aim, we exploit out-of-plane and grazing incidence X-ray diffraction (GIXD) to characterize engineered heterojunctions fabricated on native SiO2 substrates with pentacene as an organic semiconductor and C60F48 as a dopant. A strong interaction between the two species is inferred, which dramatically influences the crystalline order in the different architectures. While C60F48 crystalline domains orient randomly on the SiO2 surface, the ulterior deposition of pentacene is demonstrated to induce the orientational order and reorganization of the underlying C60F48. In the inverse architecture, the highly [001]-oriented pentacene film on SiO2 has a template effect on C60F48, inducing the formation of a face-centered cubic [111]-oriented film and leading to an ordered planar heterostructure. Real-time GIXD reveals the presence of a strained C60F48 layer at the interface with a gradual relaxation and transition to 3D crystallite formation with increasing coverage. When mixed in the bulk by co-evaporation, the dopant adopts an amorphous state, embedded in a polycrystalline pentacene matrix. The interfacial effects reported here would have relevant repercussion on the efficiency of molecular doping, which makes it possible to foresee the establishment of guidelines for device performance improvement through interface engineering., This work has been supported by the Spanish Government under the project PID2019-110907GB-I00, MAT2016-77852-C2-1-R (AEI/FEDER, UE) and the “Severo Ochoa” Program for Centres of Excellence in R&D (CEX2019-000917-S) and by the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 730872 and the Marie Skłodowska-Curie grant agreement no. 722651 (SEPOMO project). The authors also acknowledge the Generalitat de Catalunya grant 2017 SGR668. This work has been carried out within the framework of the doctoral program (PhD) of Material Science (Department of Physics) of the Universitat Autonoma de Barcelona (UAB). A.B. thanks the Spanish Government financial support through BES-2016-077519 FPI fellowship. The authors thank the European Synchrotron Radiation Facility (ESRF) for providing access to ID03 for the time of the experiment. The authors are grateful to Nir Tessler and Olga Solomeshch from the Nanoelectronic Center of Technion (Haifa, Israel) for providing the dopant molecule., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Liquid-Crystalline Non-Fullerene Acceptor Enabling HighPerformance Organic Solar Cells

  • Mondelli, Pierluigi
  • Silvestri, Francesco
  • Ciammaruchi, Laura
  • Solano, Eduardo
  • Beltrán Gracia, Eduardo
  • Barrena, Esther
  • Riede, Moritz
  • Morse, Graham
cThe use of liquid crystalline (LC) compounds in organic photovoltaics has revealed to be an effective strategy to optimise the bulk heterojunction morphology, repairing structural defects through their self-assembling properties. Nonetheless, the design of LC materials has mostly been limited to donor molecules in previous reports. Here we introduce a Non-Fullerene Acceptor (NFA), 4TICO, characterised by an improved structural flexibility, which is imparted by the alkoxy sidechain and favours the formation of LC phases at high temperature. This structural polymorphism also occurs in films where the 4TICO is blended with the PBTZT-stat-BDTT-8 polymer. The high-temperature LC polymorph brings to the formation of a smooth surface morphology with less structural defects, providing solar cells with improved short-circuit current (Jsc) and fill factor (FF), by 14% and 20% respectively. An in-depth investigation of the NFA structural properties in relation to the solar cells performance and charge transport is carried out in comparison to the 4TIC crystalline isomer., P. M. and F. S. acknowledge the European Union’s Horizon 2020 research and innovation programme under Marie Skłodowska Curie Grant agreement no. 722651 (SEPOMO) for the support in the realization of this work. This work has been supported by the Spanish Government under the project PID2019-110907GB-I00, the “Severo Ochoa” Program for Centres of Excellence in R&D (CEX2019-000917-S) and by the European Union’s Horizon 2020 Research and Innovation Program under grant agreement no. 730872. E.B. and F.S. also acknowledge the Generalitat de Catalunya grant 2017 SGR668. P.M has carried out his work within the framework of the doctoral program (PhD) in Optics and Photonics of Condensed Matter Physics (Department of Physics) at the Chemnitz University of Technology and F. S. in Material Science (Department of Physics) at the Universitat Autònoma de Barcelona (UAB). GIWAXS experiments were performed at NCD-SWEET beamline at ALBA synchrotron (Beamtime ID: 2019093873) with the collaboration of ALBA staff. The authors thank Dr Pascal Kaienburg of the University of Oxford and Dr Mariano Campoy-Quiles of ICMAB for their valuable suggestions and fruitful discussions., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparing the microstructure and photovoltaic performance of 3 perylene imide acceptors with similar energy levels but different packing tendencies

  • Adel Abdelaleim, Rana
  • Gala, Elena
  • Alonso Navarro, Matías J.
  • Gutiérrez Fernández, Edgar
  • Martín, Jaime
  • Stella, Marco
  • Martínez Ferrero, Eugenia
  • Peña, Alejandro de la
  • Harbuzaru, Alexandra
  • Ramos, M. Mar
  • Ponce Ortiz, Rocío
  • Segura, José L.
  • Campoy Quiles, Mariano
While it is widely recognized that microstructure plays an important role in the performance of organic photovoltaics (OPV), systematic studies are often challenging, as varying the molecular packing through typical chemical means (such as sidechain tuning) often affects the molecular energy levels, thus preventing a clear correlation. In this work we present the synthesis of three perylene imide (PI) based electron acceptors with almost identical energy levels, but distinct packing tendencies. We confirm our initial hypothesis by measuring solution and solid-state absorption, cyclic voltammetry as well as characterizing the films by grazing incident wide angle X-ray scattering (GIWAXS). In a second step, we repeat the characterization of the three materials in blends with two polymer donors, namely PCDTBT or PBDBT, whose energy levels are well aligned with those of the PI acceptors, and which, additionally, exhibit different degrees of structural order. We show how the initial strong difference between acceptors is partially blurred in blends, but still critical. Finally, we correlate our structural data with OPV devices made with the corresponding six blends. Our data suggest that a good donor acceptor marriage should ensure good energy alignment but also exhibit complementary crystallization tendencies of the two components., The authors acknowledge financial support from the Spanish Ministry of Science and Innovation through the Severo Ochoa” Program for Centers of Excellence in R&D (No. CEX2019-000917-S), and projects PGC2018-095411-B-I00, PID2019-106268GB-C33 and PID2019-110305GB-I00, as well as the European Commission through the Horizon 2020 Marie Sklodowska-Curie ITN Programme, SEPOMO, Grant Number: 722651, and the UCM (INV.GR.00.1819.10759). E.G. specially acknowledges Comunidad de Madrid and Universidad Complutense de Madrid for a post-doctoral contract (CT20/19- CT21/19/PEJD-2018-POST/IND-8661PAI). M.J.A.N. acknowledges URJC for a post-doctoral contract. R.P.O and A.H. also acknowledge support from Junta de Andalucía (projects UMA18-FEDERJA-080). We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the blade coated to roll-to-roll coated performance gap in organic photovoltaics

  • Adel Abdelaleim, Rana
  • Morse, Graham
  • Silvestri, Francesco
  • Barrena, Esther
  • Martínez Ferrero, Eugenia
  • Campoy Quiles, Mariano
  • Tiwana, Priti
  • Stella, Marco
The fabrication of efficient organic photovoltaic (OPV) modules via high throughput methods is a crucial milestone to facilitate their commercialization. The achievement of reliable printing and coating processes for large-scale modules has, however, been challenging thus far. Indeed, the performance gap is large between cells produced at lab-scale and those resulting from industrial methods. Therefore, understanding the critical steps in the upscaling process is decisive to address the research efforts towards decreasing the aforementioned gap. In this contribution, we analyze the efficiency losses associated with several of the main steps involved in the up-scaling pathway of the OPV devices, from lab-scale blade coating to pre-industrial slot die roll-to-roll coating. We show that when using materials in the active layer for which the performance is tolerant to thickness/microstructure variations, the critical steps are related to the charge carrier blocking layers, as well as potential losses due to parasitic absorption in the semitransparent electrodes., The authors acknowledge financial support from the European Commission through the Horizon 2020 Marie Sklodowska-Curie ITN Programme, SEPOMO, Grant Number: 722651 and from the Spanish Ministry of Science and Innovation through the Severo Ochoa” Program for Centers of Excellence in R&D (No. CEX2019-000917-S), and project PGC2018-095411-B-I00., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the role of non-fullerene acceptor crystallinity in the charge transport properties and performance of organic solar cells

  • Mondelli, Pierluigi
  • Kaienburg, Pascal
  • Silvestri, Francesco
  • Scatena, Rebecca
  • Welton, Claire
  • Grandjean, Martine
  • Lemaur, Vincent
  • Solano, Eduardo
  • Nyman, Mathias
  • Horton, Peter N.
  • Coles, Simon J.
  • Barrena, Esther
  • Riede, Moritz
  • Radaelli, Paolo
  • Beljonne, David
  • Reddy, G. N.Manjunatha
  • Morse, Graham
The acceptor crystallinity has long been associated with favourable Organic Solar Cell (OSC) properties such as high mobility and fill factor. In particular, this applies to acceptor materials such as fullerene derivatives and the most recent Non-Fullerene Acceptors (NFAs), which are now surpassing a Power Conversion Efficiency (PCE) of 19%. Although these advantages are commonly attributed to their 3-dimensional crystal packing motif in the single crystal, the bridge that links the acceptor crystal packing from single crystals to solar cells has not clearly been shown yet. In this work, we investigate the molecular organisation of seven NFAs (o-IDTBR, IDIC, ITIC, m-ITIC, 4TIC, 4TICO, and m-4TICO), following the evolution of their packing motif in single-crystals, powder, and thin films made with pure NFAs and donor:NFA blends. We observed a good correlation between the NFA single crystal packing motif and their molecular arrangement in the bulk heterojunction. The NFA packing motif affects the material's propensity to form a highly crystalline domain in the blend. We specifically found that 3D reticular packing motifs show stronger ordering than 0D herringbone ones. However, the NFA packing motif is not directly correlating with device performance parameters. Although higher NFA crystallinity yields higher mobility, we found the domain purity to be more important for obtaining high efficiency organic solar cells by governing bimolecular recombination., P. Mondelli, F. Silvestri, E. Barrena and M. Riede acknowledge the European Union's Horizon 2020 research and innovation programme under Marie Skłodowska Curie Grant agreement no. 722651 (SEPOMO) for the support in the realization of this work. P. Kaienburg acknowledges funding from the Global Challenges Research Fund (GCRF) through STFC, START project ST/R002754/1; and from EPSRC for a Postdoctoral Fellowship EP/V035770/1. GIWAXS experiments were performed at the NCD-SWEET beamline at the ALBA synchrotron with the collaboration of ALBA staff (proposal 2019093873). M. Nyman acknowledges funding from the Academy of Finland through project #326000. M. Reddy acknowledges European Union's Horizon 2020 Research and Innovation Programme under the Skłodowska-Curie Grant (No. 79529). ss-NMR experiments were performed at the large-scale NMR facilities cofounded by IR INFRANALYTICS FR-2040. E. Barrena acknowledges funding by the Spanish Ministry under project PID2019-110907GB-I00 (AEI/FEDER, UE). P. Mondelli acknowledges support under the European Union’s Horizon 2020 research and innovation programme “GREENELIT”, Grant Agreement No. 951747., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analysis of the degradation mechanisms in roll-to-roll P3HT-based organic photovoltaic modules

  • Adel, Rana
  • Grüne, Jeannine
  • Klotz, Jannis
  • Stella, Marco
  • Dyakonov, Vladimir
  • Campoy Quiles, Mariano
  • Sperlich, Andreas
  • Martínez Ferrero, Eugenia
Solution-processed organic solar modules offer a promising approach for low-cost and flexible organic photovoltaic (OPV) technology. However, one of the key challenges of these devices is the degradation of materials over time, leading to overall limited module stability, which ultimately results in a decrease in efficiency. In this study, the environmental degradation mechanisms of roll-to-roll slot-die organic solar modules have been investigated by means of photovoltaic, spectroscopic and electron paramagnetic resonance (EPR) measurements. The degradation of modules based on blends of P3HT with PC61BM fullerene or with non-fullerene o-IDTBR acceptors has been analyzed following the ISOS-L-1 protocol. Moreover, two different encapsulating materials have also been studied. Our results indicate that the fullerene acceptor provides better stabilization to the donor polymer than the non-fullerene acceptor. Additionally, oxygen diffusion affects not only the photoactive layer components but also the hole transport layer. Finally, the encapsulation with adequate materials, such as a barrier foil offering UV protection, allows for longer lifetimes., All the authors acknowledge financial support from the European Commission through the Horizon 2020 Marie Sklodowska-Curie ITN Programme, SEPOMO, Grant Number: 722651. MCQ thanks the Ministry of Science and Education of Spain and the European Union NextGenerationEU/PRTR for funding through grant TED2021-131911B-I00 and PLEC2022-009323., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed