Pasar al contenido principal

HIBRIDOS DE MATERIALES ORGANICOS E INORGANICOS PARA APLICACIONES HIBRIDAS FOTOVOLTAICA Y TERMOELECTRICA

MAT2015-70850-P

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 36
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploring different doping mechanisms in thermoelectric polymer/ carbon nanotube composites

  • Dörling, Bernhard
  • Sandoval, Stefania
  • Kankla, Pacharapon
  • Fuertes, Amparo
  • Tobias, Gerard
  • Campoy Quiles, Mariano
This work compares various methods to prepare polymer/carbon nanotube (CNT) composites for thermoelectric applications, focusing on the different doping mechanisms. We first look at the general trends observed in the Seebeck coefficient and power factor for a large number of composites as a function of electrical conductivity. Then we discuss two methods of nitrogen doping the carbon nanotubes in these composites, namely either during synthesis, or afterwards by ammonolysis. Finally, we discuss doping of the carbon nanotubes through charge transfer from the polymer counterpart, including photo-induced switching of the majority carrier type. As a general remark, we note that processability is negatively influenced by some doping procedures. Best results were achieved for unfunctionalized single-walled carbon nanotubes with a high content of semiconducting CNT species., The authors would like to thank Prof. Michael L. Chabinyc, Prof. Christian Müller and Prof. Alejandro R. Goñi for useful discussions. We are grateful to John D. Craddock, Prof. Matthew C. Weisen- berger and Prof. John E. Anthony for providing the n-MWCNTs. The authors would also like to acknowledge financial support from the Ministerio de Economía y Competitividad of Spain through projects CSD2010–00044 (Consolider NANOTHERM), MAT2015- 70850-P and MAT2014-53500-R; and the European Research Council (ERC) under grant agreement no. 648901. S. Sandoval acknowledges a contract though PIE 201660E013 and P. Kankla the Development and Promotion of Science and Technology Talents Project (DPST). We are grateful to Thomas Swan Co. Ltd for supplying Elicarb1 SWCNTs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic disorder, phonon lifetimes, and the assignment of modes to the vibrational spectra of methylammonium lead halide perovskites

  • Leguy, Aurélien M. A.
  • Goñi, Alejandro R.
  • Rodríguez Martínez, Xabier
  • Alonso Carmona, M. Isabel
  • Campoy Quiles, Mariano
  • Barnes, Piers R. F.
Leguy, Aurélien M. A. et al., We present Raman and terahertz absorbance spectra of methylammonium lead halide single crystals (MAPbX3, X = I, Br, Cl) at temperatures between 80 and 370 K. These results show good agreement with density-functional-theory phonon calculations.1 Comparison of experimental spectra and calculated vibrational modes enables confident assignment of most of the vibrational features between 50 and 3500 cm-1. Reorientation of the methylammonium cations, unlocked in their cavities at the orthorhombic-to-tetragonal phase transition, plays a key role in shaping the vibrational spectra of the different compounds. Calculations show that these dynamics effects split Raman peaks and create more structure than predicted from the independent harmonic modes. This explains the presence of extra peaks in the experimental spectra that have been a source of confusion in earlier studies. We discuss singular features, in particular the torsional vibration of the C-N axis, which is the only molecular mode that is strongly influenced by the size of the lattice. From analysis of the spectral linewidths, we find that MAPbI3 shows exceptionally short phonon lifetimes, which can be linked to low lattice thermal conductivity and supressed electron-phonon scattering events., The authors thank Juraj Sibik and Axel Zeitler for their contribution in the measurement and interpretation of the terahertz absorption spectra, and Philip Calado and Davide Moia for their helpful discussions regarding the TOC graphic. PB and AL are grateful to the EPSRC (EP/J002305/1, EP/M014797/1 and EP/M023532/1) for financial support. The work at Bath was supported by the EPSRC (EP/K016288/1, EP/K004956/1, EP/L000202, and EP/M009580/1) and the ERC (Grant 277757). ARG, MIA and MCQ thank the Spanish Ministry of Economy and Competitiveness (MINECO) for its support through Grant No. CSD2010-00044 (Consolider NANOTHERM) and MAT2015-70850-P (HIBRI2). The work at ICMAB was carried out under the auspices of the Spanish Severo Ochoa Centre of Excellence program (grant SEV-2015-0496). F. B. is funded through the EU DESTINY Network (Grant No. 316494). JN acknowledges the EPSRC for founding (EP/J017361). AP would like to thank the Royal Irish Academy for the Charlemont grant for funding the research visit that made the terahertz work possible., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlled Pinning of Conjugated Polymer Spherulites and Its Application in Detectors

  • Dörling, Bernhard
  • Sánchez Díaz, Antonio
  • Arteaga, Oriol
  • Veciana, Andrea
  • Alonso Carmona, M. Isabel
  • Campoy Quiles, Mariano
The nucleation of single macroscopic spherulites at desired positions, as well as ordered arrays of multiple spherulites, is demonstrated by combining the use of crystallizable solvents with local control of solvent evaporation during solution deposition. Moreover, the temperature assisted localized frustration of molecular orientation is shown, enabling the fabrication of samples containing both isotropic areas and spherulites. These macroscopic circular polycrystalline structures are characterized using a range of polarized spectroscopic techniques that allow quantifying their large degree of chain orientation. In order to show the potential of these large conjugated polymer spherulites centered at desired locations, graded bilayer organic photovoltaic devices were fabricated to be used as polarimeters, solid state light polarization detectors with no moving parts, and position sensitive photodetectors., The authors would like to acknowledge financial support from the Ministerio de Economía y Competitividad of Spain through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015- 0496) and projects CSD2010-00044 (Consolider NANOTHERM) and MAT2015-70850-P; CSIC through project 201560I032; and the European Research Council (ERC) under grant agreement no. 648901. The authors would like to thank Mr. Javier Fernández Tejero and Ms. Laura Córcoles Guija for their contribution toward putting together the LBIC system and Andrés Gomez for the AFM measurements. The authors are grateful to Dr. Miquel Garriga (ICMAB) and Dr. Alejandro Goñi (ICMAB) for useful discussions. The residents of Sant Pol de Mar are sincerely acknowledged for inspiration regarding a sundial that works in the shade., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantifying local thickness and composition in thin films of organic photovoltaic blends by Raman scattering

  • Rodríguez Martínez, Xabier
  • Vezie, Michelle S.
  • Shi, Xingyuan
  • McCulloch, Iain
  • Nelson, Jenny
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
We report a methodology based on Raman spectroscopy that enables the non-invasive and fast quantitative determination of local thickness and composition in thin films (from few monolayers to hundreds of nm) of one or more components. We apply our methodology to blends of organic conjugated materials relevant in the field of organic photovoltaics. As a first step, we exploit the transfer-matrix formalism to describe the Raman process in thin films including reabsorption and interference effects of the incoming and scattered electric fields. This allows determining the effective solid-state Raman cross-section of each material by studying the dependence of the Raman intensity on film thickness. These effective cross sections are then used to estimate the local thickness and composition in a series of polymer:fullerene blends. We find that the model is accurate within ±10 nm in thickness and ±5 vol% in composition provided that (i) the film thickness is kept below the thickness corresponding to the first maximum of the calculated Raman intensity oscillation; (ii) the materials making up the blend show close enough effective Raman cross-sections; and (iii) the degree of order attained by the conjugated polymer in the blend is similar to that achieved when cast alone. Our methodology opens the possibility to make quantitative maps of composition and thickness over large areas (from microns to centimetres squared) with diffraction-limited resolution and in any multi-component system based thin film technology., We are indebted to Bernhard Dörling from ICMAB for the development of the accelerated blade coating platform. We also acknowledge Antonio Sánchez-Díaz from ICMAB for the evaporation of MoO3/Ag electrodes. The Spanish Ministerio de Economía y Competitividad (MINECO) is gratefully acknowledged for its support through Grant No. SEV-2015- 0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program and through Grants No. MAT2012-37776, MAT2015-70850-P and No. CSD2010-00044 (Consolider NANOTHERM). We also acknowledge financial support from the European Research Council through project ERC CoG648901. M.S.V. acknowledges support from the Engineering and Physical Sciences Research Council (EPSRC) via a post-graduate research studentship. J.N. and X.S. thank the EPSRC for support via grants EP/M025020/1 and EP/K029843/1. M.S.V. and X.S. acknowledge additional supports from European COST Action MP1307 (StableNextSol) for inter-institutional research visits., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectroscopic imaging ellipsometry of self-assembled SiGe/Si nanostructures

  • Alonso Carmona, M. Isabel
  • Funke, S.
  • González, A.
  • Garriga Bacardi, Miquel
  • Vaccaro, Pablo Óscar
  • Goñi, Alejandro R.
  • Ruiz, A.
  • Alonso, María
  • Thiesen, P.H.
Spectroscopic imaging ellipsometry is used to characterize films containing self-assembled SiGe/Si in-plane nanowires grown by molecular beam epitaxy on a Si(001) substrate. The spatial resolution of the order of ∼1 μm allows to study individual nanowires. The obtained images consist of both ψ and Δ values measured in every pixel. From them, spatially resolved contributions to the dielectric function within the films are well visible, coming for example from composition variations. In particular, a strong in-plane anisotropy of the optical response of the nanowires is evidenced. Spectroscopic measurements from different regions of the film are analyzed and compared to spectra calculated using standard ellipsometry multilayer models. The results show the potential of imaging ellipsometry to study micro- and nanostructured semiconductor samples., We acknowledge funding by the Spanish Ministry of Economy and Competitiveness (MINECO) through grants CSD2010-00044 (Consolider NANOTHERM), MAT2013-47878-C2-1-R, MAT2015-70850-P, and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of the dielectric function of colloidal Cd1 − xHgxTe quantum dot films by spectroscopic ellipsometry

  • Bejaoui, A.
  • Alonso Carmona, M. Isabel
  • Garriga Bacardi, Miquel
  • Campoy Quiles, Mariano
  • Goñi, Alejandro R.
  • Zapien, J. Antonio
Bejaoui, A. et al., We report on the investigation by spectroscopic ellipsometry of films containing Cd1 − xHgxTe alloy quantum dots (QDs). The alloy QDs were fabricated from colloidal CdTe QDs grown by an aqueous synthesis process followed by an ion-exchange step in which Hg2+ ions progressively replace Cd2+. For ellipsometric studies, several films were prepared on glass substrates using layer-by-layer (LBL) deposition. The contribution of the QDs to the measured ellipsometric spectra is extracted from a multi-sample, transmission and multi- angle-of-incidence ellipsometric data analysis fitted using standard multilayer and effective medium models that include surface roughness effects, modeled by an effective medium approximation. The relationship of the dielectric function of the QDs retrieved from these studies to that of the corresponding II–VI bulk material counterparts is presented and discussed., The authors acknowledge financial support from the RGC/CSIC Joint Research Scheme with Refs. S-HK001/12 (RGC) and 2011HK0016 (CSIC). MIA, MG, MCQ and ARG thank the Spanish Ministry of Economy and Competitiveness for funding through grant MAT2015-70850-P, and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496). JAZ acknowledges partial support from Project CityU 122812 from the Research Grants Council of Hong Kong. SVK and ALR acknowledge support from the Research Grants Council of Hong Kong (project CityU 11302114), and from the CityU Research Project 9610350., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymer:Fullerene Bimolecular Crystals for Near‐Infrared Spectroscopic Photodetectors

  • Zheng, Tang
  • Sánchez Díaz, Antonio
  • Campoy Quiles, Mariano
  • Vandewal, Koen
Zheng, Tang et al., Spectroscopic photodetection is a powerful tool in disciplines such as medical diagnosis, industrial process monitoring, or agriculture. However, its application in novel fields, including wearable and biointegrated electronics, is hampered by the use of bulky dispersive optics. Here, solution‐processed organic donor–acceptor blends are employed in a resonant optical cavity device architecture for wavelength‐tunable photodetection. While conventional photodetectors respond to above‐gap excitation, the cavity device exploits weak subgap absorption of intermolecular charge‐transfer states of the intercalating poly[2,5‐bis(3‐tetradecylthiophen‐2‐yl)thieno[3,2‐b]thiophene] (PBTTT):[6,6]‐phenyl‐C61‐butyric acid methyl ester (PCBM) bimolecular crystal. This enables a highly wavelength selective, near‐infrared photoresponse with a spectral resolution down to 14 nm, as well as dark currents and detectivities comparable with commercial inorganic photodetectors. Based on this concept, a miniaturized spectrophotometer, comprising an array of narrowband cavity photodetectors, is fabricated by using a blade‐coated PBTTT:PCBM thin film with a thickness gradient. As an application example, a measurement of the transmittance spectrum of water by this device is demonstrated., The authors thank Prof. Olle Inganäs for discussions and use of his laboratory for carrying out parts of this work. This work was supported by the Alexander von Humboldt‐Foundation, through fellowships to Z.T. and Z.M., and the German Federal Ministry for Education and Research (BMBF) through the InnoProfile project “Organische p–i–n Bauelemente 2.2”. W.L. acknowledges financial support by the National Natural Science Foundation of China (Grant Nos. 51603209 and 21574138) and the Strategic Priority Research Program (XDB12030200) of the Chinese Academy of Sciences. A.M. acknowledges financial support by the Deutsche Forschungsgemeinschaft, project number LE747/53‐1. A.S.D. and M.C.Q. thank the European Research Council for financial support through grant CoG648901 and Ministerio de Economía y Competitividad of Spain through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV‐2015‐0496) and project MAT2015‐70850‐P., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Topological distribution of reversible and non-reversible degradation in perovskite solar cells

  • Gómez Rodríguez, Andrés
  • Sánchez, Sandy
  • Campoy Quiles, Mariano
  • Abate, Antonio
Lead halide perovskites have recently raised as an easy to process and cost-effective photovoltaic material. However, stability issues have to be addressed to meet the market need for 25 years durable technology. The stability of the perovskite itself, as well as the stability of the perovskite embedded in a complete device under real working conditions, are a key challenge for perovskite solar cells. Within this study, we used Photoconductive Atomic Force Microscopy (pcAFM) and Photoluminescence imaging (PL) to investigate at the nanoscale level the degradation of the perovskite film under light and voltage stress. Then, we correlate the nanoscale pcAFM and PL analysis to the macroscopic device behaviour in similar ageing condition. We found that non-reversible performance losses in a complete device originate from degradation localised at the grain boundaries of the perovskite film. Interesting, within the bulk of the perovskite grains we observed fully reversible behaviours. We conclude that the grain boundaries are detrimental to the device stability and they need to be minimized or passivated to achieve fully stable perovskite solar cells even under anhydrous conditions., NFFA-Europe has received funding from the EU's H2020 framework programme for research and innovation under grant agreement n. 654360. ICMAB acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496) and projects ENE2015-68995-REDT and MAT2015-70850-P., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High‐Throughput Multiparametric Screening of Solution Processed Bulk Heterojunction Solar Cells

  • Sánchez Díaz, Antonio
  • Rodríguez Martínez, Xabier
  • Córcoles, Laura
  • Mora, Germán
  • Campoy Quiles, Mariano
One of the major bottlenecks in the development of organic photovoltaics is the time needed to evaluate each material system. This time ranges from weeks to months if different variables such as blend composition, thickness, annealing, and additives are to be explored. In this study, the use of lateral gradients is proposed in order to evaluate the photovoltaic potential of a material system up to 50 times faster. A platform that combines blade coating using controllable velocity profiles (thickness gradients) with multichannel dispensers (composition gradients) and controlled lateral annealing variations (nanostructure gradients) is introduced. These samples are then analyzed using photocurrent and Raman imaging in order to correlate one to one the device performance, thickness, composition, and annealing temperature. The strength of the developed technology is shown by optimizing three different systems, namely PCDTBT:PC70BM, PTB7‐Th:PC70BM, and PffBT4T‐2OD:PC70BM, obtaining efficiencies ≈5%, 8%, and 9.5%, respectively, using less than 10 mg of each polymer in the process., The authors are indebted to Dr. Bernhard Dörling for the development of the blade coating accelerating electronics, and Xavier Tejero and Prof. Alejandro Goñi for their help with setting up the LBIC system. The authors would also like to thank Dr. Juan Cabanillas (IMDEA) for useful discussions. The authors would like to acknowledge financial support from the Ministerio de Economía y Competitividad of Spain through the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV‐2015‐0496) and project MAT2015‐70850‐P; and the European Research Council (ERC) under grant agreement No. 648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Conjugated Polymers: Relationship Between Morphology and Optical Properties

  • Alonso Carmona, M. Isabel
  • Campoy Quiles, Mariano
In this Chapter we will start by briefly summarising the basic concepts of the electronic structure of conjugated polymers. This will enable the discussion of the relevant descriptions of the dielectric function. We will relate these descriptions to the model parameterisations which are used in advanced ellipsometric analysis of thin films such as those used in devices for organic photovoltaics (OPVs) and light emitting diodes (OLEDs). Amongst other things, such parametric descriptions are useful to deal with structural changes in conjugated polymer thin films. Once the models are presented, we will provide representative examples of the nexus between morphology and optical constants, and how the latter can be employed to infer aspects of the former. First, we will discuss how chain conformation affects the optical properties. Then, we will explain the anisotropic behaviour of conjugated polymer films due to their intrinsic molecular anisotropy and review different cases (f. i., oriented films or semicrystalline polymers). We will also describe structural changes that occur upon blending polymers with fullerenes and concomitant variations of the optical properties. Here we will focus on state of the art low band gap polymers mixed with fullerenes. Finally, real-time ellipsometric experiments in which these structure-property relationships can be exploited will be presented., The authors acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through grant MAT2015-70850-P and the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparing the potential of different strategies for colour tuning in thin film photovoltaic technologies

  • Pascual San José, Enrique
  • Sánchez Díaz, Antonio
  • Stella, Marco
  • Martínez Ferrero, Eugenia
  • Alonso Carmona, M. Isabel
  • Campoy Quiles, Mariano
While the performance of some emerging solar cell technologies is rocketing, there are other important parameters that also need to be considered for industrialization, including aesthetics, payback time or long-term stability. More specifically, aesthetical features of the solar cells play a very important role in the path towards the integration of these semi-transparent technologies into the buildings and windows of the future. In this work, we have implemented a theoretical methodology to study in depth colour tuning in polymer-based organic photovoltaic cells that uses experimentally complex refractive indices. We compare quantitatively basic interference effects (through active layer thickness), binaries with different donors and different acceptors, and ternary systems where the third component is either active or a simple dye. For hybrid perovskite solar cells, we compare the colour tuning capability of blending and alloying. Additionally, we show that the same theoretical framework can be employed for the so-called inverse problem, i.e. determining the best solar cell parameters (specific materials, donor:acceptor ratio and photoactive film thickness) that can reproduce a desired set of chromaticity coordinates., This work was supported by the Spanish Ministerio de Economía y Competitividad (MINECO); under Grant MAT2015-70850-P (HIBRI2) and No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence; EURECAT, Centre Tecnològic de Catalunya through a research contract and European Research Council through project ERC CoG648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Defect tolerant perovskite solar cells from blade coated non-toxic solvents

  • Bi, Zhuoneng
  • Rodríguez Martínez, Xabier
  • Aranda, Clara
  • Pascual San José, Enrique
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
  • Xu, Xueqing
  • Guerrero, Antonio
Understanding crystallization of lead halide perovskites by industrially relevant techniques using non-toxic solvents is a topic that needs development. To this date, highest efficiency devices are prepared by deposition of the perovskite layer using non-scalable techniques, toxic solvents and/or require additional processing steps. In this work, we show that efficient one-step perovskite solar cells can be obtained by doctor blade. The perovskite film is formed under supersaturation regime from non-toxic solvents following spherulitic growth. This method results in highly crystalline perovskite films with preferential crystal orientation. Co-local photoluminescence and light-beam induced current experiments show that generated chemical defects are confined at the boundary of spherulites and these do not have a negative effect on the extracted photocurrent. Strikingly, spherulitic formation, rather than being detrimental, can lead to better photovoltaic performance in hybrid perovskite films. This is further confirmed in photovoltaic devices with record efficiencies of 18.0% for MAPbI3 (MA= Methyl ammonium) for doctor bladed processing using non-toxic solvents. Moreover, large area devices (1.53 cm2) fabricated using doctor blade show remarkable efficiencies (14.2%) reinforcing the viability of this solar technology towards industrialization., We greatly thank financial support by the Spanish Ministerio de Economía y Competitividad (MINECO) under projects MAT2016-76892-C3-1-R, MAT2015-70850-P (HIBRI2), Ramón y Cajal Fellowship number RYC-2014-16809 and through Grant No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence (ICMAB). X.X. and Z.B. would like to thank the Project on the Collaborative Innovation and Environmental Construction Platform of Guangdong Province (2014A050503051). We also thank the University Jaume I for financial support with the project (UJI-B2017-32) and its Serveis Centrals (SCIC) are acknowledged for the SEM measurement assistance. Finally, the authors at ICMAB would like to acknowledge financial support from the European Research Council (ERC) under grant agreement no. 648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pressure-Induced Locking of Methylammonium Cations versus Amorphization in Hybrid Lead Iodide Perovskites

  • Francisco López, Adrián
  • Charles, Bethan
  • Weber, Oliver J.
  • Alonso Carmona, M. Isabel
  • Garriga Bacardi, Miquel
  • Campoy Quiles, Mariano
  • Weller, Mark T.
  • Goñi, Alejandro R.
The structural phase behavior of high-quality single crystals of methylammonium lead iodide (CH3NH3PbI3 or MAPbI3) was revisited by combining Raman scattering and photoluminescence (PL) measurements under high hydrostatic pressure up to ca. 10 GPa. The single crystals were specially grown with the final thickness needed for pressure experiments, retaining their high quality due to a less invasive preparation procedure, which avoids sample thinning. Both PL and Raman spectra show simultaneous changes in their profiles that indicate the occurrence of three phase transitions subsequently at around 0.4, 2.7, and 3.3 GPa. At the second phase transition, the Raman spectra exhibit a pronounced reduction in the line width of the phonon modes of the inorganic cage, similar to the changes observed at the tetragonal-to-orthorhombic phase transition occurring at around 160 K but ambient pressure. This behavior is interpreted as evidence for the locking of the organic cations in the cage voids above 2.7 GPa due to the reduced volume and symmetry of the unit cell. At the third phase transition, reported here for the first time, the PL is greatly affected, whereas the Raman spectrum experiences only subtle changes related to a splitting of some of the peaks. This behavior may indicate a change mostly in the electronic structure with little effect on the crystal structure. Strikingly, the sharp Raman features observed at high pressures do not support amorphization of MAPbI3 with onset at 3 GPa, as claimed by most of the high-pressure (X-ray) literature. We interpret this apparent discrepancy in terms of the degree of disorder introduced at different length scales in the perovskite lattice by the pressure-induced freeze-out of the methylammonium cation motion., The Spanish Ministerio de Economí a, Industria y Competitividad, is gratefully acknowledged for its support through Grant No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program and through Grants MAT2015-70850-P (HIBRI2) and CSD2010-00044 (Consolider NANOTHERM). A.F.-L. acknowledges a FPI fellowship from the Spanish Ministerio co-financed by the European Social Fund. B.C. and O.J.W. thank the EPSRC for Ph.D. studentship funding via the CSCT CDT (EP/ G03768X/1, EP/L016354/1). Financial support is also acknowledged from the European Research Council through project ERC CoG648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Band gap tuning of solution processed ferroelectric perovskite BiFe1-xCoxO3 thin films

  • Machado, Pamela
  • Scigaj, Mateusz
  • Gázquez, Jaume
  • Rueda, Estel
  • Sánchez Díaz, Antonio
  • Fina, Ignasi
  • Gibert Roca, Martí
  • Puig Molina, Teresa
  • Obradors, Xavier
  • Campoy Quiles, Mariano
  • Coll, Mariona
Ferroelectric perovskite oxides are emerging as a promising photoactive layer for photovoltaic applications due to their very high stability and their alternative ferroelectricity-related mechanism for solar energy conversion that could lead to extraordi-narily high efficiencies. One of the biggest challenges so far is to reduce their band gap towards the visible while simultane-ously retaining ferroelectricity. To address these two issues, herein it is performed an elemental composition engineering of BiFeO3 by substituting Fe by Co cations, as means to tune the characteristics of the transition metal-oxygen bond. We demonstrate by solution processing the formation of epitaxial, pure phase and stable BiFe1-xCoxO3 thin films for x=0.3 and film thickness up to 100 nm. Importantly, the band gap can be tuned from 2.7 eV to 2.3 eV upon cobalt substitution while simultaneously enhancing ferroelectricity. As a proof of concept, non-optimized vertical devices have been fabricated and, reassuringly, the electrical photoresponse in the visible of the Co-substituted phase is improved with respect to the unsubsti-tuted oxide., We would like to acknowledge Prof. Josep Fontcuberta for fruitful discussions and comments on this study and for providing access to his experimental facilities. This research was supported by the Spanish MINECO (“Severo Ochoa” Programme for Centres of Excellence in R&D SEV-2015-0496 and FIPNANOSOLE- 2016, MAT2017-83169-R, MAT2014-51778-C2- 1-R, MAT2015-70850-P, MAT2017-85232-R (AEI/FEDER, EU)), the Generalitat de Catalunya (2017-SGR-1519, 2017 SGR- 1377), the European Research Council-ERC (FOREMAT under grant agreement no. 648901) and “L’Oreal UNESCO For Women in Science”. M.C., J.G. and I.F. acknowledge RyC contracts (2013-12448, 2012-11709 and RYC-2017-22531). I.F. is grateful to MINECO for MAT2015-73839-JIN project. The HRTEM microscopy work was conducted at the Center for Nanophase Materials Sciences at Oak Ridge National Laboratory, which is a DOE Office of Science User Facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Optical properties of semiconductors

  • Alonso Carmona, M. Isabel
  • Garriga Bacardi, Miquel
In this chapter we present basic concepts which are relevant to link the results obtained from ellipsometry data analysis with fundamental properties of semiconductors for photovoltaic applications. The linear optical properties of semiconductors are best discussed in terms of the relationship between the dielectric function ε and the band structure., The authors thank the Spanish Ministry of Economy and Competitiveness (MINECO) for funding through grants CSD2010-00044, MAT2015-70850-P, and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV- 2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Organic Solar Cells

  • Alonso Carmona, M. Isabel
  • Campoy Quiles, Mariano
Organic solar cells attract both scientific and economic interest due to their potential for clean and cost-effective photovoltaic energy conversion. Continuous evolution of this field relies on materials research, including synthesis of new compounds and fine control over film microstructure, as well as improved device architectures. In this context, spectroscopic ellipsometry is a helpful characterization tool, stretching over material preparation, device structure, and device modelling. This chapter will provide a general perspective of aspects that can be investigated by ellipsometry in these systems. The acquired insights enhance our capability to understand and model the optoelectronic properties of photovoltaic devices., The authors thank Ms. Andrea Pitillas help in the preparation of devices studied in Fig. 15.8 and the Spanish Ministry of Economy and Competitiveness for funding through grants MAT2012-37776, MAT2015-70850-P, and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Organic-Inorganic Hybrid Perovskite Solar Cells

  • Fujiwara, Hiroyuki
  • Podraza, Nikolas J.
  • Alonso Carmona, M. Isabel
  • Kato, Masato
  • Ghimire, Kiran
  • Miyadera, Tetsuhiko
  • Chikamatsu, Masayuki
Quite high efficiencies exceeding 20% have been realized in solar cells incorporating organic-inorganic hybrid perovskites (APbX3), which have a unique structure with a center cation [A = CH3NH3+, HC(NH2) 2 + ] located within a PbX3− cage (X = I, Br, Cl). Superior characteristics of hybrid perovskite solar cells can be understood from the nature of optical transitions and the efficient carrier collection in the device. From these points of view, this chapter provides details on optical properties of various hybrid perovskite materials and carrier dynamics in the solar cells. In particular, based on the first-principles analyses of different perovskite materials, we present universal rules that allow the unified interpretation of the optical absorption phenomenon in APbX3 perovskites. The external quantum efficiency (EQE) analysis further reveals that high short-circuit current densities (>20 mA/cm2) observed in the perovskite solar cells originate from electric-field-assisted carrier collection and the suppressed optical losses in the devices. Although hybrid perovskites have quite favorable characteristics for solar cells, these materials exhibit rather intense phase change upon exposure to humid air. In this chapter, the degradation process of CH3NH3PbI3 in humid air, characterized by applying ellipsometry technique, is further presented and discussed., N. J. Podraza and K. Ghimire would like to acknowledge D. Zhao, A. Cimaroli, Y. Ke, F. Hong, T. Shi, and Prof. Y. Yan for providing samples and materials; M. Junda for graphical assistance; and the National Science Foundation for financial support (CHE-1230246). M. I. Alonso acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through grants CSD2010-00044, MAT2015-70850-P, and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Equal Footing of Thermal Expansion and Electron–Phonon Interaction in the Temperature Dependence of Lead Halide Perovskite Band Gaps

  • Francisco López, Adrián
  • Charles, Bethan
  • Weber, Oliver J.
  • Alonso Carmona, M. Isabel
  • Garriga Bacardi, Miquel
  • Campoy Quiles, Mariano
  • Weller, Mark T.
  • Goñi, Alejandro R.
Lead halide perovskites, which are causing a paradigm shift in photovoltaics, exhibit an atypical temperature dependence of the fundamental gap: it decreases in energy with decreasing temperature. Reports ascribe such a behavior to a strong electron−phonon renormalization of the gap, neglecting contributions from thermal expansion. However, high-pressure experiments performed on the archetypal perovskite MAPbI3 (MA stands for methylammonium) yield a negative pressure coefficient for the gap of the tetragonal room-temperature phase, which speaks against the assumption of negligible thermal expansion effects. Here we show that for MAPbI3 the temperature-induced gap renormalization due to electron−phonon interaction can only account for about 40% of the total energy shift, thus implying thermal expansion to be more if not as important as electron− phonon coupling. Furthermore, this result possesses general validity, holding also for the tetragonal or cubic phase, stable at ambient conditions, of most halide perovskite counterparts., We gratefully acknowledge fruitful discussions with H. Míguez, M. Calvo and A. Rubino from the Institute of Materials Science of Seville, Spain. The Spanish Ministerio de Ciencia, Innovación y Universidades is gratefully acknowledged for its support through Grant No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program and through Grant MAT2015-70850-P (HIBRI2). AFL acknowledges a FPI fellowship (BES-2016-076913) from the Spanish Ministerio co-financed by the European Social Fund and the PhD programme in Materials Science from Universitat Autònoma de Barcelona in which he is enrolled. BC and OJW thank the EPSRC for PhD studentship funding via the CSCT CDT (EP/G03768X/1, EP/L016354/1). Financial support from is also acknowledged from the European Research Council through project ERC CoG648901., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ferroelectricity-free lead halide perovskites

  • Gómez Rodríguez, Andrés
  • Wang, Qiong
  • Goñi, Alejandro R.
  • Campoy Quiles, Mariano
  • Abate, Antonio
Direct piezoelectric force microscopy (DPFM) is employed to examine whether or not lead halide perovskites exhibit ferroelectricity. Compared to conventional piezoelectric force microscopy, DPFM is a novel technique capable of measuring piezoelectricity directly. This fact is fundamental to be able to examine the existence of ferroelectricity in lead halide perovskites, an issue that has been under debate for several years. DPFM is used to detect the current signals, i.e. changes in the charge distribution under the influence of the scan direction and applied force of the atomic force microscope (AFM) tip in contact mode. For comparison, (i) we use DPFM on lead halide perovskites and well-known ferroelectric materials (i.e. periodically poled lithium niobate and lead zirconate titanate); and (ii) we conduct parallel experiments on MAPbI3 films of different grain sizes, film thicknesses, substrates, and textures using DPFM as well as piezoelectric force microscopy (PFM) and electrostatic force microscopy (EFM). In contrast to previous work that claimed there were ferroelectric domains in MAPbI3 perovskite films, our work shows that the studied perovskite films Cs0.05(FA0.83MA0.17)0.95Pb(I0.83Br0.17)3 and MAPbI3 are ferroelectricity-free. The observed current profiles of lead halide perovskites possibly originate from ion migration that happens under an applied electrical bias and in strained samples under mechanical stress. This work provides a deeper understanding of the fundamental physical properties of the organic–inorganic lead halide perovskites and solves a longstanding dispute about their non-ferroelectric character: an issue of high relevance for optoelectronic and photovoltaic applications., The authors gratefully acknowledge the Spanish Ministerio de Economía, Industria y Competitividad for its support through Grant No. MAT2015-70850-P, PGC2018-095411-B-I00 and SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program and through Grant MAT2015-70850-P (HIBRI2). We thank the financial support from the European Research Council through project ERC CoG648901. We thank the Program under grant agreement No. 654360 within the framework of NFFA-Europe that benefits us with access to ICMAB-CSIC in Barcelona. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI). A. A. thanks the National Natural Science Foundation of China under the grant number 21750110442., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Assembly-Induced Bright-Light Emission from Solution-Processed Platinum(II) Inorganic Polymers

  • Perevedentsev, Aleksandr
  • Bargardi, Fabio L.
  • Sanchez Ferrer, Antoni
  • Cheetham, Nathan J.
  • Sousaraei, Ahmad
  • Busato, Stephan
  • Gierschner, Johannes
  • Milian Medina, Begoña
  • Mezzenga, Raffaele
  • Wannemacher, Reinhold
  • Cabanillas–Gonzalez, Juan
  • Campoy Quiles, Mariano
  • Caseri, Walter R.
Synthesis, processing, and characterization are reported for a series of tetracyanoplatinate Magnus' salt (TCN-MS) derivatives-soluble derivatives of the generally intractable Magnus' green salt-that feature the general structure [Pt(NH2R)(4)] [Pt(CN)(4)] where R is a branched alkyl group or a w-phenylalkyl group. In solutions, these coordination compounds generally dissolve on the level of individual ion pairs as shown by X-ray diffraction analysis. To enable the formation of quasi-one-dimensional linear stacks of Pt(II) atoms in thin films, the matrix-assisted assembly is employed, whereby the compounds are codissolved with poly(ethylene oxide) (PEO), followed by film casting, thermally activated assembly, and eventual removal of PEO. Remarkably, assembled TCN-MS inorganic polymers exhibit bright blue-green photoluminescence. A detailed investigation of the assembly process and simultaneously modified solid-state optical properties is performed using a range of microscopy, optical and vibrational spectroscopy, and thermal analysis techniques. Given their unusual combination of optical properties, namely, transparency in the visible region, high photoluminescence quantum efficiencies (up to 13% in first-demonstration samples), and large Stokes shifts (up to 1 eV), TCN-MS derivatives are proposed as a promising class of light-emitting materials for emerging applications in molecular optoelectronics, the potential and challenges of which are discussed., The work in Barcelona was financially supported by the Ministerio de Economía y Competitividad of Spain through the Severo Ochoa Programme for Centres of Excellence in R&D (SEV-2015-0496) and project MAT2015-70850-P and the European Research Council (ERC) under grant agreement no. 648901. The work in Madrid and Valencia was supported by the Spanish Ministerio de Economía y Competitividad (MINECO-FEDER project CTQ2017-87054); the work in Madrid was further supported by the Severo Ochoa Programme for Centers of Excellence in R&D program of the MINECO (SEV-2016-0686) and by the Campus of International Excellence (CEI) UAM + CSIC., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Farming thermoelectric paper

  • Abol Fotouh, Deyaa
  • Dörling, Bernhard
  • Zapata Arteaga, Osnat
  • Rodríguez Martínez, Xabier
  • Gómez Rodríguez, Andrés
  • Reparaz, J. S.
  • Laromaine, Anna
  • Roig Serra, Anna
  • Campoy Quiles, Mariano
Waste heat to electricity conversion using thermoelectric generators is emerging as a key technology in the forthcoming energy scenario. Carbon-based composites could unleash the as yet untapped potential of thermoelectricity by combining the low cost, easy processability, and low thermal conductivity of biopolymers with the mechanical strength and good electrical properties of carbon nanotubes (CNTs). Here we use bacteria in environmentally friendly aqueous media to grow large area bacterial nanocellulose (BC) films with an embedded highly dispersed CNT network. The thick films (≈10 μm) exhibit tuneable transparency and colour, as well as low thermal and high electrical conductivity. Moreover, they are fully bendable, can conformally wrap around heat sources and are stable above 500 K, which expands the range of potential uses compared to typical conducting polymers and composites. The high porosity of the material facilitates effective n-type doping, enabling the fabrication of a thermoelectric module from farmed thermoelectric paper. Because of vertical phase separation of the CNTs in the BC composite, the grown films at the same time serve as both the active layer and separating layer, insulating each thermoelectric leg from the adjacent ones. Last but not least, the BC can be enzymatically decomposed, completely reclaiming the embedded CNTs., The authors would like to thank Prof. A. Goñi for useful discussions, Dr A. Mihi for help with the FTIR equipment and integrating sphere, Mr J. Jurado for assistance with the IR camera, and Mrs S. Roig-Sánchez for the mechanical characterization. We also greatly acknowledge financial support from the Spanish Ministry of Economy, Industry and Competitiveness through the “Severo Ochoa” Programme for Centers of Excellence in R&D (SEV-2015-0496) and MAT2015-70850-P and MAT2015-64442-R projects; Generalitat de Catalunya (2017SGR765 and 2017SGR488 projects); CSIC through project 201560I032; and the European Research Council (ERC) under grant agreement no. 648901. DAF is grateful to the Egyptian Ministry of Higher Education and scientific research for his PhD grant. We also kindly thank Zeon Nano Technology for providing the Supergrowth CNTs., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Blade coated P3HT:non-fullerene acceptor solar cells: a high-throughput parameter study with a focus on up-scalability

  • Pascual San José, Enrique
  • Rodríguez Martínez, Xabier
  • Adel Abdelaleim, Rana
  • Stella, Marco
  • Martínez Ferrero, Eugenia
  • Campoy Quiles, Mariano
Combining non-fullerene acceptors (NFAs) with novel low band gap polymers has led to very promising performances. However, research on donors that can reduce the performance–cost gap, such as poly(3-hexylthiophene) (P3HT), can play an instrumental role in the upscaling of this technology. In this paper, we have analysed the influence of several processing parameters on the performance of solar cells based on P3HT:NFA binaries deposited by blade coating. The investigated NFAs include molecules with variations in the side chains and end-capping groups. More precisely, we have looked at devices based on P3HT blended with five NFAs, namely ITIC, ITIC-M, O-IDTBR, EH-IDTBR, and O-IDFBR, and employed PC60BM and ICBA as reference acceptors. More than one thousand doctor-bladed P3HT:NFA samples were manufactured using high throughput techniques using gradients of both thickness and annealing temperature. The combined data for all samples were employed to perform a parameter sensitivity study in order to identify the most influential parameters for P3HT based devices. For all material combinations, we have found that blade coated solar cells fabricated from chlorobenzene/dichlorobenzene mixtures outperform those based on chlorobenzene. For the most promising binary (i.e. P3HT:O-IDTBR), we have investigated in more depth the effects resulting from the choice of solvent, as well as casting temperature and post-deposition thermal annealing. Devices with power conversion efficiencies greater than 5% were obtained regardless of the casting temperature and for a relatively wide thickness range (80–250 nm). Finally, we have shown that encapsulated devices exhibit a stable performance for more than 3000 h and that degradation progresses faster in thicker devices. O-IDTBR has been identified to play a major role in the device degradation., This work was supported by the Spanish Ministerio de Economía y Competitividad (MINECO) under Grants MAT2015-70850-P, PGC2018-095411-B-I00 and SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence, the EURECAT Technology Centre, European Research Council through project ERC CoG648901 and H2020 Marie Curie actions through the SEPOMO project (Grant number 722651). We are also very thankful to Mr Fernando Gallegos for manufacturing the metallic holder, Mr Martí Gibert for the useful multiplexer/switcher design, Dr Bernhard Dörling for designing the doctor blade controller, Mr Adrián Francisco for helping with Raman fittings and Dr Marta Riba, Mrs Marta Gerbolés, Mrs Anna Crespí and Mr Andrés Gómez for helping with contact angle, XRD and AFM measurements, respectively. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectroscopic ellipsometry study of FAxMA1−xPbI3 hybrid perovskite single crystals

  • Alonso Carmona, M. Isabel
  • Charles, Bethan
  • Francisco López, Adrián
  • Garriga Bacardi, Miquel
  • Weller, Mark T.
  • Goñi, Alejandro R.
Conference Collection: 8th International Conference on Spectroscopic Ellipsometry 2019, ICSE, Organic-inorganic hybrid perovskites have the generic formula ABX3, where X denotes a halide anion and A and B stand for an organic and a metal cation, respectively. These hybrid compounds are semiconductors with highly interesting and tunable properties. They are the subject of intense research for several applications, mainly in solar cells but also as light-emitting diodes and lasers. Tunability of the optical properties may be accomplished by site-substituted solid solutions in A, B, or X sites. In particular, some mixed-cation systems show increased stability for these applications. In this work, the authors report on the variation of the optical constants in mixed A-site cation methylammonium/formamidinium (MA/FA) lead iodide perovskites FAxMA1−xPbI3 evaluated by spectroscopic ellipsometry in single crystal samples. The two main polymorphs of FAPbI3 are measured. The study is complemented by photoluminescence measurements to gain a better insight into observed spectroscopic features related to the electronic interband transitions of the crystals and their structural integrity. The main result is a continuous variation of the pseudocubic perovskite band structure of the solid solutions between the two end compounds MAPbI3 and α-FAPbI3., The authors gratefully acknowledge Oliver J. Weber and Mariano Campoy-Quiles for their helpful comments. The Spanish Ministerio de Ciencia, Innovación y Universidades is acknowledged for its support through Grant No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program and through Grant Nos. MAT2015-70850-P (HIBRI2) and PGC2018-095411-B-100 (RAINBOW). The authors also acknowledge the AGAUR for Grant No. 2017-SGR-00488. B.C. acknowledges the Engineering and Physical Sciences Research Council (EPSRC) for Ph.D. studentship funding via the CSCT CDT (No. EP/G03768X/1). A.F.L. acknowledges the Ph.D. program in Materials Science from Universitat Autònoma de Barcelona in which he is enrolled and an FPI fellowship (No. BES-2016-076913) from the Spanish Ministerio, co-financed by the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solar Harvesting: a Unique Opportunity for Organic Thermoelectrics?

  • Jurado, José Piers
  • Dörling, Bernhard
  • Zapata Arteaga, Osnat
  • Roig Serra, Anna
  • Mihi, Agustín
  • Campoy Quiles, Mariano
Thermoelectrics have emerged as a strategy for solar‐to‐electricity conversion, as they can complement photovoltaic devices as IR harvesters or operate as stand‐alone systems often under strong light and heat concentration. Inspired by the recent success of inorganic‐based solar thermoelectric generators (STEGs), in this manuscript, the potential of benchmark organic thermoelectric materials for solar harvesting is evaluated. It is shown that the inherent properties of organic semiconductors allow the possibility of fabricating organic STEGs (SOTEGs) of extraordinary simplicity. The broadband light absorption exhibited by most organic thermoelectrics combined with their low thermal conductivities results in a significant temperature rise upon illumination as seen by IR thermography. Under 2 sun illumination, a temperature difference of 50 K establishes between the illuminated and the non‐illuminated sides of a poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) film, and ≈40 K for a carbon nanotube/cellulose composite. Moreover, when using light as a heat source, the Seebeck coefficient remains unaffected, while a small photoconductivity effect is observed in PEDOT:PSS and carbon nanotubes. Then, the effect of several geometrical factors on the power output of a solar organic thermoelectric generator is investigated, enabling us to propose simple SOTEG geometries that capitalize on the planar geometry typical of solution‐processable materials. Finally, a proof‐of‐concept SOTEG is demonstrated, generating 180 nW under 2 suns., The authors acknowledge financial support from the Spanish Ministry of Economy, Industry, and Competitiveness through the ‘‘Severo Ochoa'' Program for Centers of Excellence in R&D (SEV‐2015‐0496), MAT2015‐70850‐P and PGC2018‐095411‐B‐I00 projects; from the Generalitat de Catalunya through grants 2017SGR488 and AGAUR 2018 PROD 00191; from CSIC through project 201560I032; and from the European Research Council (ERC) under grant agreement no. 648901. This project has received funding from the European Union's Horizon 2020 research and innovation program under the Marie Skłodowska‐Curie grant agreement No. 713673. J.P.J. has received financial support through the “la Caixa” INPhINIT Fellowship Grant for Doctoral studies at Spanish Research Centers of Excellence (Grant code: LCF/BQ/IN17/11620035), “la Caixa” Banking Foundation (ID100010434), Barcelona, Spain. O.Z.A. acknowledges CONACYT‐SENER for his Ph.D. scholarship (No 472571). The authors thank Dr. Deyaa Abol‐Fotouh (ICMAB) for the CNT:cellulose sample preparation. The authors thank Dr. Anna Laromaine (ICMAB), Dr. Sebastian Reparaz (ICMAB), and Dr. Carlos Prieto (ICMM) for fruitful discussions. The authors also thank Mr. Martí Gibert Roca for his help with the 3D printer and Dr. Alexander Stangl for his help with the nanovoltmeter., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coercivity modulation in Fe–Cu pseudo-ordered porous thin films controlled by an applied voltage: A sustainable, energy-efficient approach to magnetoelectrically driven materials

  • Dislaki, Evangelia
  • Robbennolt, Shauna
  • Campoy Quiles, Mariano
  • Nogués, Josep
  • Pellicer, Eva
  • Sort, Jordi
Fe–Cu films with pseudo‐ordered, hierarchical porosity are prepared by a simple, two‐step procedure that combines colloidal templating (using sub‐micrometer‐sized polystyrene spheres) with electrodeposition. The porosity degree of these films, estimated by ellipsometry measurements, is as high as 65%. The resulting magnetic properties can be controlled at room temperature using an applied electric field generated through an electric double layer in an anhydrous electrolyte. This material shows a remarkable 25% voltage‐driven coercivity reduction upon application of negative voltages, with excellent reversibility when a positive voltage is applied, and a short recovery time. The pronounced reduction of coercivity is mainly ascribed to electrostatic charge accumulation at the surface of the porous alloy, which occurs over a large fraction of the electrodeposited material due to its high surface‐area‐to‐volume ratio. The emergence of a hierarchical porosity is found to be crucial because it promotes the infiltration of the electrolyte into the structure of the film. The observed effects make this material a promising candidate to boost energy efficiency in magnetoelectrically actuated devices., This work was supported by the SELECTA (No. 642642) H2020‐MSCA‐ITN‐2014 project. Partial financial support by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) (Project Nos. MAT2017‐86357‐C3‐1‐R, MAT2015‐70850‐P and associated FEDER), the Generalitat de Catalunya (2017‐SGR‐292), and the European Research Council (SPIN‐PORICS and FOREMAT, with Agreement Nos. 648454 and 648901, respectively) is acknowledged. E.P. is grateful to MINECO for the “Ramon y Cajal” contract (RYC‐2012‐10839). The ICN2 is funded by the CERCA programme/Generalitat de Catalunya. The ICN2 is supported by the Severo Ochoa programme of MINECO, grant no. SEV‐2013‐0295., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Closing the Stability–Performance Gap in Organic Thermoelectrics by Adjusting the Partial to Integer Charge Transfer Ratio

  • Zapata Arteaga, Osnat
  • Dörling, Bernhard
  • Perevedentsev, Aleksandr
  • Martín, Jaime
  • Reparaz, J. S.
  • Campoy Quiles, Mariano
Two doping mechanisms are known for the well-studied materials poly(3-hexylthiophene) (P3HT) and poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT), namely, integer charge transfer (ICT) and charge transfer complex (CTC) formation. Yet, there is poor understanding of the effect of doping mechanism on thermal stability and the thermoelectric properties. In this work, we present a method to finely adjust the ICT to CTC ratio. Using it, we characterize electrical and thermal conductivities as well as the Seebeck coefficient and the long-term stability under thermal stress of P3HT and PBTTT of different ICT/CTC ratios. We establish that doping through the CTC results in more stable, yet lower conductivity samples compared to ICT doped films. Importantly, moderate CTC fractions of ∼33% are found to improve the long-term stability without a significant sacrifice in electrical conductivity. Through visible and IR spectroscopies, polarized optical microscopy, and grazing-incidence wide-angle X-ray scattering, we find that the CTC dopant molecule access sites within the polymer network are less prone to dedoping upon thermal exposure., We thank Dr. Martijn Kemerink for fruitful discussions at the early stages of this project. The authors acknowledge financial support from the Spanish Ministry of Economy, Industry, and Competitiveness through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496), MAT2015-70850-P, PGC2018-095411-B-I00, and No. MAT2017-90024-P (TANGENTS)-EI/FEDER, UE projects; from the Generalitat de Catalunya through grants 2017SGR488 and AGAUR 2018 PROD 00191; from CSIC through project 201560I032; and from the European Research Council (ERC) under grant agreement no. 648901. O.Z.-A. acknowledges CONACYT-SENER for his Ph.D. scholarship (No. 472571). J.M. furthermore thanks MINECO for the Ramón y Cajal contract and the PGC2018-094620-A-I00 grant. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On the impact of the stress situation on the optical properties of WSe2 monolayers under high pressure

  • Francisco López, Adrián
  • Han, Bo
  • Lagarde, D.
  • Marie, X.
  • Urbaszek, B.
  • Robert, Cédric
  • Goñi, Alejandro R.
We have studied the optical properties of WSe2 monolayers (ML) by means of photoluminescence (PL), PL excitation (PLE) and Raman scattering spectroscopy at room temperature and as a function of hydrostatic pressure up to ca. 12 GPa. For comparison, the study comprises two cases: A single WSe2 ML directly transferred onto one of the diamonds of the diamond anvil cell and a WSe2 ML encapsulated into hexagonal boron nitride (hBN) layers. The pressure dependence of the A and B exciton, as determined by PL and PLE, respectively, is very different for the case of the bare WSe2 ML and the hBN/WSe2-ML/hBN heterostructure. Whereas for the latter the A and B exciton energy increases linearly with increasing pressure at a rate of 3.5 to 3.8 meV/GPa, for the bare WSe2 ML the A and B exciton energy decreases with a coefficient of -3.1 and -1.3 meV/GPa, respectively. We interpret that this behavior is due to a different stress situation. For a single ML the stress tensor is essentially uniaxial with the compressive stress component in the direction perpendicular to the plane of the ML. In contrast, for the substantially thicker hBN/WSe2-ML/hBN heterostructure, the compression is hydrostatic. The results from an analysis of the pressure dependence of the frequency of Raman active modes comply with the interpretation of having a different stress situation in each case., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Non-reciprocal diffraction in magnetoplasmonic gratings

  • Cichelero, Rafael
  • Kataja, Mikko
  • Campoy Quiles, Mariano
  • Herranz, Gervasi
Phase-matching conditions—used to bridge the wave vector mismatch between light and surface plasmon polaritons (SPPs)—have been exploited recently to enable nonreciprocal optical propagation and enhanced magneto-optic responses in magnetoplasmonic systems. Here we show that using diffraction in conjunction with plasmon excitations leads to a photonic system with a more versatile and flexible response. As a testbed, we analyzed diffracted magneto-optical effects in magnetoplasmonic gratings, where broken time-reversal symmetry induces frequency shifts in the energy and angular spectra of plasmon resonance. These result in exceptionally large responses in the diffracted magnetooptical effect. The concepts presented here can be used to develop non-reciprocal optical devices that exploit diffraction, in order to achieve tailored electromagnetic responses., Spanish Ministerio de Economía y Competitividad through projects MAT2017-85232-R (AEI/FEDER,UE), MAT2014-56063-C2-1-R, Severo Ochoa (SEV-2015-0496) and MAT2015-70850-P, by the Generalitat de Catalunya (2017 SGR 1377), by CNPq – Brazil, and by the European Comission (Marie Skłodowska-Curie IF EMPHASIS - DLV-748429)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase Diagram of Methylammonium/Formamidinium Lead Iodide Perovskite Solid Solutions from Temperature-Dependent Photoluminescence and Raman Spectroscopies

  • Francisco López, Adrián
  • Charles, Bethan
  • Alonso Carmona, M. Isabel
  • Garriga Bacardi, Miquel
  • Campoy Quiles, Mariano
  • Weller, Mark T.
  • Goñi, Alejandro R.
The complete phase diagram of organic-cation solid solutions of lead iodide perovskites [FAxMA1–xPbI3, where MA stands for methylammonium, CH3NH3, and FA for formamidinium, CH(NH2)2] with compositions x ranging from 0 to 1 in steps of 0.1 was constructed in the temperature range from 10 to 365 K by combining Raman scattering and photoluminescence (PL) measurements. The occurrence of phase transitions was inferred from both the temperature-induced changes in the optical emission energies and/or the phonon frequencies and line widths, complementing X-ray and neutron scattering literature data. For MA-rich perovskites (x ≤ 0.2), the same structural behavior as for MAPbI3 was observed with decreasing temperature: cubic Pm3̅m → tetragonal-I I4/mcm → orthorhombic Pnma. As the FA molecule is larger and more symmetric but less polar than MA, a tetragonal crystal structure is favored at low temperatures and FA compositions x > 0.4, to the detriment of the orthorhombic phase. As a consequence, with decreasing temperature, the phase transition sequence for FA-rich compounds is cubic Pm3̅m → tetragonal-II P4/mbm → tetragonal-III. The latter presumably belongs to the P4bm symmetry group, according to neutron scattering data. Strikingly, the isostructural (tetragonal-to-tetragonal) transformation, which occurs between 200 and 150 K, exhibits a kind of critical point for x = 0.7. For intermediate FA contents, the perovskite solid solution transforms close to 250 K directly from the cubic phase to the tetragonal-III phase. The latter is characterized by a nonmonotonic dependence of the band-gap energy on temperature. We ascribe such behavior to a substantial tilting of the PbI6 octahedra in the tetragonal-III phase. In this way, we established important links between crystal-phase stability and the electronic as well as vibrational properties of mixed organic-cation halide perovskites, which might impact the current search for more stable best-performing optoelectronic materials., The Spanish Ministerio de Ciencia, Innovación y Universidades is gratefully acknowledged for its support through Grant No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program and through Grants MAT2015-70850-P (HIBRI2) and PGC2018-095411-B-100 (RAINBOW). We also thank the Catalan agency AGAUR for grant 2017-SGR-00488. AFL acknowledges an FPI fellowship (BES-2016-076913) from the Spanish Ministerio co-financed by the European Social Fund and the Ph.D. programme in Materials Science from Universitat Autònoma de Barcelona in which he is enrolled. B.C. thanks the EPSRC for Ph.D. studentship funding via the CSCT CDT (EP/G03768X/1)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Investigating Thermoelectric Stability under Encapsulation Using PEI-Doped CNT Films as a Model System

  • Abdallah, Fatma
  • Ciammaruchi, Laura
  • Jiménez Arguijo, Álex
  • Duraia, El-Shazly M.
  • Ragab, Hossam. S.
  • Dörling, Bernhard
  • Campoy Quiles, Mariano
The stability of organic semiconductors is an important topic, which in the case of organic thermoelectrics (OTEs), has not yet got the attention it deserves. This work presents a simple method which allows to characterize the stability of OTEs, using patterned ITO substrates to electrically contact encapsulated samples. The method is applied to n‐doped carbon nanotube films, a well‐suited reference system due to their sensitivity to changes in doping level, and used to compare the effectiveness of different encapsulation methods. In the observed films, oxygen adsorption leads to a gradual p‐doping. Among the investigated barrier materials, glass performs best. Flexible alternatives like transferred films of barrier polymers also show promise, while barrier films deposited by dropcast performed worse, likely due to their inhomogeneity. Finally, Raman imaging is shown to be a useful technique to investigate degradation in OTEs., The authors would like to thank Aleksandr Perevedentsev for advice with the EVOH film transfer. The authors acknowledge financial support from the Spanish Ministry of Economy, Industry, and Competitiveness through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV‐2015‐0496), MAT2015‐70850‐P, and from the Generalitat de Catalunya through AGAUR 2018 PROD 00191; from CSIC through project 201560I032; and from the European Research Council (ERC) under grant agreement no. 648901. F.A., E.‐S.M.D., and H.S.R would like to acknowledge the Ministry of Higher Education (MOHE) of Egypt, the National Bank of Egypt and Banque Misr for funding the fellowship to conduct this study., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Near infrared organic photodetectors based on enhanced charge transfer state absorption by photonic architectures

  • Gibert Roca, Martí
  • Molet, Pau
  • Mihi, Agustín
  • Campoy Quiles, Mariano
Near infrared photodetectors are a widespread and fundamental technology in many disciplines, from astronomy and telecommunications to medical sciences. Current technologies are now striving to include new aspects in this technology such as wearability, flexibility and tunability. Organic photodetectors easily offer many of those advantages but their relatively high bandgaps hinder NIR operation. In this work, we demonstrate solution processed organic photodetectors with improved NIR response thanks to a nanostructured active layer in the shape of a photonic crystal. The latter strongly increases the charge transfer state absorption, which is normally weak but broadband, increasing the optical path of light and resulting in remarkable photoresponse significantly below the band gap of the blend. We show responsivities up to 50 mA W−1 at 900 nm for PBTTT:PC71BM based photodetectors. On top of that, by varying the lattice parameter of the photonic crystal structure, the spectral response of the photodetectors can be tuned beyond 1000 nm. Furthermore, our photonic structure can be easily implemented in the device in a single nanoimprinting step, with minimal disruption on the fabrication process, which makes this approach very promising for upscaling., We greatly acknowledge financial support from the Ministerio de Ciencia, Innovación y Universidades MICINN with projects PGC2018-095411-B-I00, MAT2016-79053-P and MAT2015-70850-P and the “Severo Ochoa” excellence program SEV-2015-0496; Generalitat de Catalunya program AGAUR 2017-SGR-00488; and the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grants no. CoG648901 and StG637116). P. M. acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofounded by the ESF. M. G. R. acknowledges financial support from an FPU grant (no. 16/02631) (2017) of the MICINN (Spain). M. G. R. and P. M. B. acknowledge the departments of Physics, Chemistry and Geology of the Autonomous University of Barcelona (UAB) as coordinators of the PhD programme in Materials Science. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Beating the thermal conductivity alloy limit using long-period compositionally graded Si1–xGex superlattices

  • Ferrando Villalba, P.
  • Chen, Shunda
  • Lopeandía, Aitor
  • Álvarez, Francesc Xavier
  • Alonso Carmona, M. Isabel
  • Garriga Bacardi, Miquel
  • Santiso, José
  • García, Gemma
  • Goñi, Alejandro R.
  • Donadio, Davide
  • Rodríguez-Viejo, Javier
Superlattices with scattering mechanisms at multiple length scales efficiently scatter phonons at all relevant wavelengths and provide a convenient route to reduce thermal transport. Here, we show, both experimentally and by atomistic simulations, that SiGe superlattices with well-established compositional gradients and a sufficient number of interfaces exhibit extremely low thermal conductivity. Our results reveal that the thermal conductivity of long-period (30–50 nm) superlattices with thicknesses below 200 nm is still thickness-dependent and higher than that of the corresponding alloy thin film. Increasing the number of periods up to 16 has a strong impact on heat propagation, leading to thermal conductivity values below the thin-film alloy limit. Lattice dynamics calculations confirm that the reduced thermal conductivity stems from the simultaneous effects of mass scattering, graded interface scattering, and coherent interference from the lattice periodicity. This study provides a significant step forward in understanding the role of compositional gradients in heat transport across nanostructures. The strategy of employing long-period graded superlattices with extremely low thermal conductivities has great potential for micro- and nano-thermoelectric generation and cooling of Si-based devices., The Spanish Ministerio de Ciencia, Innovacion y Universidades, is gratefully acknowledged for its support through Grant No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program and through Grants MAT2016-79759-R (PHONTANNA), MAT2015-70850-P (HIBRI2), and CSD2010-00044 (Consolider NANOTHERM). The authors also thank the Catalan agency AGAUR for Grant 2017-SGR-00488., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of Nb-doping on the local structure and thermoelectric properties of transparent TiO2:Nb thin films

  • Ribeiro, J.M.
  • Correia, Filipe C.
  • Kuzmin, A.
  • Jonane, I.
  • Kong, M.
  • Goñi, Alejandro R.
  • Reparaz, J. S.
  • Kalinko, A.
  • Welter, E.
  • Tavares, C.J.
Transparent n-type niobium-doped titanium dioxide thin films (TiO2:1.5 at.%Nb) with pronounced thermoelectric properties were produced from a composite Ti:Nb target by reactive magnetron sputtering. The thin films were comprehensively characterized by X-ray diffraction, X-ray photoelectron spectroscopy, optical spectroscopy, electrical conductivity, and thermoelectric measurement techniques. The local structure of the thin films was investigated in detail by X-ray absorption spectroscopy at the Ti and Nb K-edges. A set of radial distribution functions were extracted from the simultaneous analysis of EXAFS data at two absorption edges using the reverse Monte Carlo method. It was found that Nb dopant atoms modify the local environment of the films, but their average structure remains close to that of the anatase phase. This conclusion is also supported by the ab initio simulations of XANES. A very high absolute Seebeck coefficient (S = 155 μV/K) for n-type TiO2 was achieved with Nb doping, yielding a maximum power factor and thermoelectric figure of merit of 0.5 mW m−1 K−2 and 0.18 at a temperature of 300 K, respectively, for a 150 nm thick film. From frequency-domain thermoreflectance experiments, a thermal conductivity value of 1.3 W m−1 K−1 was obtained for the optimized TiO2:Nb film., The experiment at HASYLAB/DESY was performed within the project I-20180036 EC. The research leading to this result has been supported by the project CALIPSOplus under the Grant Agreement 730872 from the EU Framework Programme for Research and Innovation HORIZON 2020. Filipe Correia is grateful to the Fundação para a Ciência e Tecnologia (FCT, Portugal) for the Ph.D. Grant SFRH/BD/111720/2015. Joana Ribeiro is grateful to the Project WinPSC - POCI-01-0247-FEDER-017796, for the research grant, co-funded by the European Regional Development Fund (ERDF), through the Operational Programme for Competitiveness and Internationalisation (COMPETE 2020), under the PORTUGAL 2020 Partnership Agreement. The authors acknowledge the funding from the following institution Fundação para a Ciência e Tecnologia (FCT, Portugal)/PIDDAC through the Strategic Funds project reference UID/FIS/04650/2013. The Spanish Ministry of Economy, Industry, and Competitiveness through the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2015-0496), projects No. MAT2017-90024-P (TANGENTS)-EI/FEDER and MAT2015-70850-P (HIBRI2), and the Generalitat de Catalunya through grant 2017-SGR-00488. M. K. acknowledges the Ph.D. programme in Materials Science from Universitat Autonoma de Barcelona in which she is enrolled., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Disentangling Electron–Phonon Coupling and Thermal Expansion Effects in the Band Gap Renormalization of Perovskite Nanocrystals

  • Rubino, Andrea
  • Francisco López, Adrián
  • Barker, Alex J.
  • Petrozza, Annamaria
  • Calvo, Mauricio E.
  • Goñi, Alejandro R.
  • Míguez, Hernán
The complex electron−phonon interaction occurring in bulk lead halide perovskites gives rise to anomalous temperature dependences, like the widening of the electronic band gap as temperature increases. However, possible confinement effects on the electron−phonon coupling in the nanocrystalline version of these materials remain unexplored. Herein, we study the temperature (ranging from 80 K to ambient) and hydrostatic pressure (from atmospheric to 0.6 GPa) dependence of the photoluminescence of ligand-free methylammonium lead triiodide nanocrystals with controlled sizes embedded in a porous silica matrix. This analysis allowed us to disentangle the effects of thermal expansion and electron−phonon interaction. As the crystallite size decreases, the electron−phonon contribution to the gap renormalization gains in importance. We provide a plausible explanation for this observation in terms of quantum confinement effects, showing that neither thermal expansion nor electron−phonon coupling effects may be disregarded when analyzing the temperature dependence of the optoelectronic properties of perovskite lead halide nanocrystals., Funding for this work was provided by the Spanish “Ministerio de Ciencia, Innovacion y Universidades (MCIU) ́ ” through Grants SEV-2015-0496 and CEX2019-000917-S, in the framework of the Spanish Severo Ochoa Centre of Excellence program; the AEI/FEDER(UE) Grants MAT2015-70850-P (HIBRI2), MAT2017-88584-R (MODO), and PGC2018- 095411-B-100 (RAINBOW); and the FPI fellowships BES2016-076913 (AFL) and BES-2015-072687 (AR). The Catalan agency AGAUR is also acknowledged for Grant 2017-SGR-00488. The authors are also grateful to the National Network “Red Perovskitas” (MCIU funded) and the Center of Technological Research and Innovation of the University of Seville (CITIUS), where structural characterization was performed., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Localized thinning for strain concentration in suspended germanium membranes and optical method for precise thickness measurement

  • Vaccaro, Pablo Oscar
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Garriga, Miquel|||0000-0002-6683-0790
  • Gutiérrez, Joffre
  • Peró, Damià
  • Wagner, Markus R.|||0000-0002-7367-5629
  • Reparaz, Juan Sebastián|||0000-0001-9679-0075
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
  • Vidal, Xavier|||0000-0001-8026-2016
  • Carter, E. A.
  • Lay, P. A.
  • Yoshimoto, M.
  • Goñi, Alejandro|||0000-0002-1193-3063
We deposited Ge layers on (001) Si substrates by molecular beam epitaxy and used them to fabricate suspended membranes with high uniaxial tensile strain. We demonstrate a CMOS-compatible fabrication strategy to increase strain concentration and to eliminate the Ge buffer layer near the Ge/Si hetero-interface deposited at low temperature. This is achieved by a two-steps patterning and selective etching process. First, a bridge and neck shape is patterned in the Ge membrane, then the neck is thinned from both top and bottom sides. Uniaxial tensile strain values higher than 3% were measured by Raman scattering in a Ge membrane of 76 nm thickness. For the challenging thickness measurement on micrometer-size membranes suspended far away from the substrate a characterization method based on pump-and-probe reflectivity measurements was applied, using an asynchronous optical sampling technique.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Coercivity Modulation in Fe-Cu Pseudo-Ordered Porous Thin Films Controlled by an Applied Voltage, A Sustainable, Energy-Efficient Approach to Magnetoelectrically Driven Materials

  • Dislaki, Evangelia|||0000-0002-3360-1588
  • Robbennolt, Shauna|||0000-0001-5723-7971
  • Campoy-Quiles, Mariano|||0000-0002-8911-640X
  • Nogués, Josep|||0000-0003-4616-1371
  • Pellicer, Eva|||0000-0002-8901-0998
  • Sort, Jordi|||0000-0003-1213-3639
Fe-Cu films with pseudo-ordered, hierarchical porosity are prepared by a simple, two-step procedure that combines colloidal templating (using sub-micrometer-sized polystyrene spheres) with electrodeposition. The porosity degree of these films, estimated by ellipsometry measurements, is as high as 65%. The resulting magnetic properties can be controlled at room temperature using an applied electric field generated through an electric double layer in an anhydrous electrolyte. This material shows a remarkable 25% voltage-driven coercivity reduction upon application of negative voltages, with excellent reversibility when a positive voltage is applied, and a short recovery time. The pronounced reduction of coercivity is mainly ascribed to electrostatic charge accumulation at the surface of the porous alloy, which occurs over a large fraction of the electrodeposited material due to its high surface-area-to-volume ratio. The emergence of a hierarchical porosity is found to be crucial because it promotes the infiltration of the electrolyte into the structure of the film. The observed effects make this material a promising candidate to boost energy efficiency in magnetoelectrically actuated devices.