Pasar al contenido principal

SUSTRATOS BASADOS EN CRISTALES PLASMONICOS PARA LA DETECCION DE LA DISPERSION RAMAN AMPLIFICADA EN SUPERFICIES

MAT2016-79053-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultrathin Semiconductor Superabsorbers from the Visible to the Near-Infrared

  • Molet, Pau
  • García Pomar, Juan Luis
  • Matricardi, Cristiano
  • Garriga Bacardi, Miquel
  • Alonso Carmona, M. Isabel
  • Mihi, Agustín
The design of ultrathin semiconducting materials that achieve broadband absorption is a long-sought-after goal of crucial importance for optoelectronic applications. To date, attempts to tackle this problem consisted either of the use of strong—but narrowband—or broader—but moderate—light-trapping mechanisms. Here, a strategy that achieves broadband optimal absorption in arbitrarily thin semiconductor materials for all energies above their bandgap is presented. This stems from the strong interplay between Brewster modes, sustained by judiciously nanostructured thin semiconductors on metal films, and photonic crystal modes. Broadband near-unity absorption in Ge ultrathin films is demonstrated, which extends from the visible to the Ge bandgap in the near-infrared and is robust against angle of incidence variation. The strategy follows an easy and scalable fabrication route enabled by soft nanoimprinting lithography, a technique that allows seamless integration in many optoelectronic fabrication procedures., The authors thank the Spanish Ministry of Economy and Competitiveness (MINECO) for its support through Grant MAT2016-79053-P. A.M. was funded by a Ramón y Cajal fellowship (RYC-2014-16444). The work at ICMAB was carried out under the auspices of the Spanish Severo Ochoa Centre of Excellence programme (Grant No. SEV-2015-0496). This project has received funding from the European Research Council (ERC ENLIGHTMENT) under the European Union's Horizon 2020 research and innovation programme (Grant No. 637116)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydroxypropyl cellulose photonic architectures by soft nanoimprinting lithography

  • Espinha, André
  • Dore, Camilla
  • Matricardi, Cristiano
  • Alonso Carmona, M. Isabel
  • Goñi, Alejandro R.
  • Mihi, Agustín
As contamination and environmental degradation increase nowadays, there is a huge demand for new eco-friendly materials. Despite its use for thousands of years, cellulose and its derivatives have gained renewed interest as favourable alternatives to conventional plastics, due to their abundance and lower environmental impact. We report the fabrication of photonic and plasmonic structures by moulding hydroxypropyl cellulose into sub-micrometric periodic lattices, using soft lithography. This is an alternative way to achieve structural colour in this material which is usually obtained exploiting its chiral nematic phase. Cellulose based photonic crystals are biocompatible and can be dissolved in water or not depending on the derivative employed. Patterned cellulose membranes exhibit tuneable colours and may be used to boost the photoluminescence of a host organic dye. Furthermore, we show how metal coating these cellulose photonic architectures leads to plasmonic crystals with excellent optical properties acting as disposable surface enhanced Raman spectroscopy substrates., The authors would like to acknowledge M. Simón and A. Gómez for AFM measurements. The Spanish Ministerio de Economía, Industria y Competitividad (MINECO) is gratefully acknowledged for its support through Grant No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program and also for its support through Grant MAT2016-79053-P. AM was funded by a Ramón y Cajal fellowship (RYC-2014-16444). This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant agreement No 637116, ENLIGHTMENT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gold Nanoparticle Plasmonic Superlattices as Surface Enhanced Raman Spectroscopy Substrates

  • Matricardi, Cristiano
  • Hanske, Christoph
  • García Pomar, Juan Luis
  • Langer, Judith
  • Mihi, Agustín
  • Liz-Marzán, Luis Manuel
Metal colloids are of great interest in the field of nanophotonics, mainly due to their morphology-dependent optical properties, but also because they are high quality building blocks for complex plasmonic architectures. Close-packed colloidal supercrystals not only serve for investigating the rich plasmonic resonances arising in strongly coupled arrangements, but also enables tailoring the optical response, on both the nano- and the macroscale. Bridging these vastly different length scales at reasonable fabrication costs has remained fundamentally challenging, but is essential for applications in sensing, photovoltaics or optoelectronics, among other fields. We present here a scalable approach to engineer plasmonic supercrystal arrays, based on the template-assisted assembly of gold nanospheres with topographically patterned polydimethylsiloxane molds. Regular square arrays of hexagonally packed supercrystals were achieved, reaching periodicities down to 400 nm and feature sizes around 200 nm, over areas up to 0.5 cm2. These two-dimensional supercrystals exhibit well-defined collective plasmon modes that can be tuned from the visible through the near-infrared by simple variation of the lattice parameter. We present electromagnetic modelling of the physical origin of the underlying hybrid modes, and demonstrate the application of superlattice arrays as surface-enhanced Raman scattering (SERS) spectroscopy substrates which can be tailored for a specific probe laser. We therefore investigated the influence of the lattice parameter, local degree of order, and cluster architecture, to identify the optimal configuration for highly efficient SERS of a non-resonant Raman probe with 785 nm excitation., The authors thank Dr. Guillermo González-Rubio for providing nanoparticles and assistance with the synthesis. C.H. acknowledges funding from the Alexander von Humboldt Foundation through a Feodor Lynen fellowship. Funding by the Spanish Ministerio de Economía, Industria y Competitividad (MINECO) is gratefully acknowledged (Grant SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program, and Grants MAT2016-79053-P and MAT2017-86659-R). A.M. is grateful to the funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 637116, ENLIGHTMENT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A water-processable cellulose-based resist for advanced nanofabrication

  • Dore, Camilla
  • Osmond, Johann
  • Mihi, Agustín
The ideal nanofabrication technique is one that allows the mass production of high resolution submicrometric features in a cost efficient and environmentally friendly fashion. A great step towards achieving this goal has been the development of nanoimprinting lithography, a procedure with tenths of nanometres resolution while being compatible with roll-to-roll manufacturing. However, an ecofriendly resist that can be efficiently combined with this process is still missing. In this work, we demonstrate the use of hydroxypropyl cellulose (HPC) as a biocompatible, biodegradable, and water processable resist for temperature assisted nanoimprint lithography (tNIL) by fabricating different photonic architectures. The cellulose derivative is easily patterned with submicrometric features with aspect ratios greater than 1 using an elastomeric stamp and a hot plate. Silicon photonic crystals and metal nanoparticle arrays are fabricated combining cellulose with traditional nanofrabrication processes such as spincasting, reactive ion etching and metal lift off. Furthermore, advanced nanofabrication possibilities are within reach by combining the HPC with traditional resists. In particular, poly(methyl methacrylate) and HPC stacks are easily produced by liquid phase processing, where one of the two materials can be selectively removed by developing in orthogonal solvents. This capability becomes even more interesting by including nanoimprinted layers in the stack, leading to the encapsulation of arrays of air features in the resist., The Spanish Ministerio de Economía, Industria y Competitividad (MINECO) is gratefully acknowledged for its support through Grant No. MAT2016-79053-P and through Grant No. SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program. AM was funded by a Ramón y Cajal fellowship (RYC-2014-16444). This project has received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (Grant Agreement No. 637116, ENLIGHTMENT). The authors would like to acknowledge M. Simón and A. Gómez for AFM measurements., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable index metamaterials made by bottom-up approaches

  • Gómez Castaño, Mayte
  • Hanbin, Zheng
  • García Pomar, Juan Luis
  • Vallée, Renaud
  • Mihi, Agustín
  • Ravaine, Serge
Despite the exciting optical properties metamaterials exhibit, their implementation in nowadays technology is being hampered by the inherent losses of their metal constituents and the expensive and low-throughput used procedures. As an alternative, we present a new design of double fishnet metamaterials that can be easily realized combining two inexpensive and up scalable techniques: nanosphere lithography and metallic electrodeposition. A monolayer of polystyrene spheres is used as template for the infiltration of two symmetric gold layers separated by an air gap. The effective refractive index of the metamaterial can be easily tuned by the proper choice of the diameter of the spheres and the gap width between the metallic layers, varying its value from positive to negative. The good agreement between optical measurements and finite-difference time-domain simulations confirms the success of our process. Fishnet metamaterials with refractive index going from 1.5 until -1.0 in the near infrared range are demonstrated and the key parameters for these architectures provided., This work was supported by the French National Research Agency (ANR) as part of the Initiative for Excellence IdEx Bordeaux program (ANR-10-IDEX-03-02) and the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) through grant MAT2016-79053-P and through grant SEV-2015-0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program. This project received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant no. 637116, ENLIGHTMENT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solvent-Assisted Self-Assembly of Gold Nanorods into Hierarchically Organized Plasmonic Mesostructures

  • Hanske, Christoph
  • Hill, Eric H.
  • Vila Liarte, David
  • González-Rubio, Guillermo
  • Matricardi, Cristiano
  • Mihi, Agustín
  • Liz-Marzán, Luis Manuel
Plasmonic supercrystals and periodically structured arrays comprise a class of materials with unique optical properties that result from the interplay of plasmon resonances, as well as near and far field coupling. Controlled synthesis of such hierarchical structures remains a fundamental challenge, as it demands strict control over the assembly morphology, array size, lateral spacing, and macroscale homogeneity. Current fabrication approaches involve complicated multi-step procedures lacking scalability and reproducibility, which has hindered the practical application of plasmonic supercrystal arrays. Herein, these challenges are addressed by adding an organic solvent to achieve kinetic control over the template-assisted colloidal assembly of nanoparticles from aqueous dispersion. This method yields highly regular periodic arrays, with feature sizes ranging from less than 200 nm up to tens of microns. A combined experimental/computational approach reveals that the underlying mechanism is a combination of the removal of interfacial surfactant micelles from the particle interface and altered capillary flows. Assessing the efficacy of such square arrays for surface-enhanced Raman scattering spectroscopy, we find that a decrease of the lattice periodicity from 750 nm down to 400 nm boosts the signal by more than an order of magnitude, thereby enabling sensitive detection of analytes, such as the bacterial quorum sensing molecule pyocyanin, even in complex biological media., This work has been funded by the Spanish MINECO (Grant MAT2017- 86659-R). C.H. acknowledges the Alexander von Humboldt Foundation for funding in the framework of a Feodor Lynen fellowship. E.H.H. acknowledges receipt of a Juan de la Ciervafellowship (FJCI-2014-22598). A.M. is grateful to the funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation program (grant agreement No. 637116, ENLIGHTMENT) and funding by the Spanish Ministerio de Economía, Industria y Competitividad (MINECO) (Grant SEV-2015-0496 and MAT2016-79053-P. We further thank Mathias Charconnet for fruitful discussions and Vished Kumar for TEM imaging. This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency – Grant No. MDM-2017-0720., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Energy Transfer and Interference by Collective Electromagnetic Coupling

  • Gómez Castaño, Mayte
  • Redondo Cubero, Andres
  • Buisson, Lionel
  • Pau, José Luis
  • Mihi, Agustín
  • Ravaine, Serge
  • Vallée, Renaud
  • Nitzan, Abraham
  • Sukharev, Maxim
The physics of collective optical response of molecular assemblies, pioneered by Dicke in 1954, has long been at the center of theoretical and experimental scrutiny. The influence of the environment on such phenomena is also of great interest due to various important applications in, e.g., energy conversion devices. In this Letter, we demonstrate both experimentally and theoretically the spatial modulations of the collective decay rates of molecules placed in proximity to a metal interface. We show in a very simple framework how the cooperative optical response can be analyzed in terms of intermolecular correlations causing interference between the response of different molecules and the polarization induced on a nearby metallic boundary and predict similar collective interference phenomena in excitation energy transfer between molecular aggregates., The physics of collective optical response of molecular assemblies, pioneered by Dicke in 1954, has long been at the center of theoretical and experimental scrutiny. The influence of the environment on such phenomena is also of great interest due to various important applications in, e.g., energy conversion devices. In this Letter, we demonstrate both experimentally and theoretically the spatial modulations of the collective decay rates of molecules placed in proximity to a metal interface. We show in a very simple framework how the cooperative optical response can be analyzed in terms of intermolecular correlations causing interference between the response of different molecules and the polarization induced on a nearby metallic boundary and predict similar collective interference phenomena in excitation energy transfer between molecular aggregates., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A CO2 optical sensor based on self-assembled metal–organic framework nanoparticles

  • Chocarro Ruiz, Blanca
  • Pérez-Carvajal, Javier
  • Avci-Camur, Civan
  • Calvo-Lozano, Olalla
  • Alonso Carmona, M. Isabel
  • Maspoch, Daniel
  • Lechuga, Laura M.
The development of devices for sensing and monitoring CO2 levels is crucial for many fields such as food packaging and for human safety indoors. Herein the fabrication of an optical CO2 sensor by integration of a metal–organic framework (MOF) onto bimodal optical waveguides is reported. This sensor is constructed via self-assembly of a transparent film of zeolitic imidazolate framework-8 (ZIF-8) nanoparticles (size: 32 ± 5 nm) on the waveguides. The nanoZIF-8-based sensor exhibits a broad linear response, with limits of detection of 3130 ppm at room temperature and 774 ppm at 278 K. Furthermore, it is robust, selective, fast and reusable, and can be stored under humid conditions with no loss in performance., This work was supported by a grant from the Fundación Domingo Martínez (Ayuda a la Investigación 2016. Área de Aplicaciones Materiales), the Spanish MINECO (projects PN MAT2015-65354-C2-1-R and MAT2016-79053-P), the Catalan AGAUR (project 2014 SGR 80 and 2014 SGR 624), and the ERC, under the EU FP7 (ERC-Co 615954). It was also funded by the CERCA Program/Generalitat de Catalunya. This work also made use of the Spanish ICTS Network MICRONANOFABS, which is partially supported by MEINCOM. ICN2 and ICMAB acknowledge the support of the Spanish MINECO through the Severo Ochoa Centers of Excellence Program, under Grants SEV-2013-0295 and SEV-2015-0496., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanostructured Back Reflectors for Efficient Colloidal Quantum-Dot Infrared Optoelectronics

  • Baek, Se-Woong
  • Molet, Pau
  • Choi, Min-Jae
  • Biondi, Margherita
  • Ouellette, Olivier
  • Fan, James
  • Hoogland, Sjoerd
  • García de Arquer, F. Pelayo
  • Mihi, Agustín
  • Sargent, Edward H.
Colloidal quantum dots (CQDs) can be used to extend the response of solar cells, enabling the utilization of solar power that lies to the red of the bandgap of c‐Si and perovskites. To achieve largely complete absorption of infrared (IR) photons in CQD solids requires thicknesses on the micrometer range; however, this exceeds the typical diffusion lengths (≈300 nm) of photoexcited charges in these materials. Nanostructured metal back electrodes that grant the cell efficient IR light trapping in thin active layers with no deterioration of the electrical properties are demonstrated. Specifically, a new hole‐transport layer (HTL) is developed and directly nanostructured. Firstly, a material set to replace conventional rigid HTLs in CQD devices is developed with a moldable HTL that combines the mechanical and chemical requisites for nanoimprint lithography with the optoelectronic properties necessary to retain efficient charge extraction through an optically thick layer. The new HTL is nanostructured in a 2D lattice and conformally coated with MoO3/Ag. The photonic structure in the back electrode provides a record photoelectric conversion efficiency of 86%, beyond the Si bandgap, and a 22% higher IR power conversion efficiency compared to the best previous reports., S.-W.B., P.M., and M.-J.C. contributed equally to this work. This work was supported by Ontario Research Fund-Research Excellence program (ORF7-Ministry of Research and Innovation, Ontario Research FundResearch Excellence Round 7), and by the Natural Sciences and Engineering Research Council (NSERC) of Canada. This work was also supported by the National Research Foundation of Korea (NRF) funded by NRF-2018R1A6A3A03012630. The authors thank the Spanish Ministry of Economy and Competitiveness (MINECO) for its support through grant nos. MAT2016-79053-P and SEV-2015-0496. This project received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 research and innovation programme (grant no. 637116). The authors thank L. Levina, R. Wolowiec, D. Kopilovic, E. Palmiano, and J. L. Garcia-Pomar for their help over the course of this research., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large area metasurfaces made with spherical silicon resonators

  • Molet, Pau
  • Gil Herrera, Luz Karimé
  • García Pomar, Juan Luis
  • Caselli, Niccolò
  • Blanco Montes, Álvaro
  • López, Cefe
  • Mihi, Agustín
High-index dielectric nanostructures have emerged as an appealing complement to plasmonic nanostructures, offering similar light management capabilities at the nanoscale but free from the inherent optical losses. Despite the great interest in these all-dielectric architectures, their fabrication still requires cumbersome fabrication techniques that limit their implementation in many applications. Hence, the great interest in alternative scalable procedures. Among those, the fabrication of silicon spheres is at the forefront, with several routes available in the literature. However, the exploitation of the Mie modes sustained by these silicon resonators is limited over large areas by polydispersity or a lack of long-range order. Here, we present an all-dielectric metamaterial fabricated with a low cost and highly scalable technique: a combination of soft imprinting nanolithography and chemical vapor deposition. The resulting all-dielectric metasurface is composed of an array of silicon hemispheres on top of a high refractive index dielectric substrate. This architecture allows the exploitation of high-quality Mie resonances at a large scale due to the high monodispersity of the hemispheres organized in a single crystal two-dimensional lattice. The optical response of the metasurface can be engineered by the design parameters of the nanoimprinted structure. We further demonstrate the potential of this platform to enhance light emission by coupling dye molecules to the sustained Mie resonances and measuring both an eight-fold amplified signal and a triple lifetime reduction., We greatly acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities with projects MAT2016-79053-P and RTI2018-093921-B-C41 and the excellence program SEV-2015-0496; Generalitat de Catalunya program AGAUR 2017-SGR-00488; and the European Research Council under the European Union’s Horizon 2020 research and innovation program (grant number 637116, Funder Id: http://dx.doi.org/10.13039/100010663). P.M acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofounded by the ESF and UAB school doctoral program. L.K.G. acknowledges a COLCIENCIAS doctoral grant. N.C. acknowledges the JdlC programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Near infrared organic photodetectors based on enhanced charge transfer state absorption by photonic architectures

  • Gibert Roca, Martí
  • Molet, Pau
  • Mihi, Agustín
  • Campoy Quiles, Mariano
Near infrared photodetectors are a widespread and fundamental technology in many disciplines, from astronomy and telecommunications to medical sciences. Current technologies are now striving to include new aspects in this technology such as wearability, flexibility and tunability. Organic photodetectors easily offer many of those advantages but their relatively high bandgaps hinder NIR operation. In this work, we demonstrate solution processed organic photodetectors with improved NIR response thanks to a nanostructured active layer in the shape of a photonic crystal. The latter strongly increases the charge transfer state absorption, which is normally weak but broadband, increasing the optical path of light and resulting in remarkable photoresponse significantly below the band gap of the blend. We show responsivities up to 50 mA W−1 at 900 nm for PBTTT:PC71BM based photodetectors. On top of that, by varying the lattice parameter of the photonic crystal structure, the spectral response of the photodetectors can be tuned beyond 1000 nm. Furthermore, our photonic structure can be easily implemented in the device in a single nanoimprinting step, with minimal disruption on the fabrication process, which makes this approach very promising for upscaling., We greatly acknowledge financial support from the Ministerio de Ciencia, Innovación y Universidades MICINN with projects PGC2018-095411-B-I00, MAT2016-79053-P and MAT2015-70850-P and the “Severo Ochoa” excellence program SEV-2015-0496; Generalitat de Catalunya program AGAUR 2017-SGR-00488; and the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation programme (grants no. CoG648901 and StG637116). P. M. acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofounded by the ESF. M. G. R. acknowledges financial support from an FPU grant (no. 16/02631) (2017) of the MICINN (Spain). M. G. R. and P. M. B. acknowledge the departments of Physics, Chemistry and Geology of the Autonomous University of Barcelona (UAB) as coordinators of the PhD programme in Materials Science. We acknowledge support of the publication fee by the CSIC Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrodeposited Negative Index Metamaterials with Visible and Near Infrared Response

  • Gómez Castaño, Mayte
  • García Pomar, Juan Luis
  • Pérez, Luis Alberto
  • Shanmugathasan, Sharvina
  • Ravaine, Serge
  • Mihi, Agustín
Negative index metamaterials have revolutionized the field of photonics because of their unconventional electromagnetic properties absent in naturally occurring materials. It remains a challenge however, to achieve strong negative refractive index at optical frequencies over large areas in a device compatible fashion. In this work, a scalable method for the straightforward production of fishnet‐like negative index metamaterials combining soft nanoimprinting and electrodeposition is reported. In four simple steps, 2D arrays of pillars surrounded by metal–insulator–metal stacks made of gold and air gaps are created. The proper design of the geometrical features leads to negative indices from the visible to the near infrared, with values from ‐1.2 at 700 nm to ‐2.8 at 910 nm. The metamaterials are prepared on transparent conductive electrodes hence ready for device implementation. In addition, the nanostructures display high optical quality, which is corroborated with numerical simulations under normal and oblique incidence. As a proof of concept, the accessibility to the porosity of the metamaterial by studying the spectral changes produced when infiltrating different liquids through the metallic layers is demonstrated. The resonant wavelength increasing with the refractive index of the media makes the metamaterials potential platforms for both negative index structures and optical sensors., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) through grant MAT2016‐79053‐P, the excellence program SEV‐2015‐0496, Generalitat de Catalunya program AGAUR 2017‐SGR‐00488, and by the French National Research Agency (ANR) as part of the program Initiative for Excellence IdEx Bordeaux (ANR‐10‐IDEX‐03‐02). This project received funding from the European Research Council (ERC) under the European Union’s Horizon 2020 and innovation program (grant number 637116, ENLIGHTMENT)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Throughput Nanofabrication of Metasurfaces with Polarization-Dependent Response

  • Matricardi, Cristiano
  • García Pomar, Juan Luis
  • Molet, Pau
  • Pérez, Luis Alberto
  • Alonso Carmona, M. Isabel
  • Campoy Quiles, Mariano
  • Mihi, Agustín
Metal nanostructures offer exciting ways to manage light at the nanoscale exploited in fields such as imaging, sensing, energy conversion, and information processing. The optical response of the metallic architectures can be engineered to exhibit photonic properties that span from plasmon resonances to more complex phenomena such as negative refractive index, optical chirality, artificial magnetism, and more. However, the latter optical properties are only observed in intricate architectures, which are highly demanding in terms of nanofabrication and hence less scalable and far away from device implementation. Here, a series of metasurfaces covering centimeter areas and operating in the visible spectrum are presented, which are produced from the combination of nanoimprinting lithography and oblique angle metal evaporation. The potential of this scalable approach is illustrated by easily fabricating metasurfaces engineered to exhibit artificial optical magnetism, tunable linear polarization dependent response, chirality with g‐factor of 0.2, and photoluminescence enhancement of 20 times over a 9 mm2 area., The Spanish Ministerio de Economía, Industria y Competitividad (MINECO) is gratefully acknowledged for its support through Grant No. MAT2016‐79053‐P and through Grant No. SEV‐2015‐0496 in the framework of the Spanish Severo Ochoa Centre of Excellence program. This project received funding from the European Research Council (ERC) under the European Union's Horizon 2020 research and innovation program (Grant Agreement Nos. 637116, ENLIGHTMENT and 648901, FOREMAT) and the Generalitat de Catalunya program AGAUR 2017‐SGR‐00488. P.M. acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofunded by the ESF. L.A.P. is thankful to the Marie Sklodowska‐Curie Actions (H2020‐MSCA‐IF‐2018) for grant agreement No. 839402, PLASMIONICO., Peer reviewed
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

A CO2 optical sensor based on self-assembled metal-organic framework nanoparticles

  • Chocarro Ruiz, Blanca|||0000-0003-3835-9046
  • Pérez-Carvajal, Javier|||0000-0002-6916-1158
  • Avci, Civan|||0000-0001-7202-7454
  • Calvo Lozano, Olalla|||0000-0001-5486-2237
  • Alonso Carmona, Maria Isabel|||0000-0001-7669-5871
  • Maspoch, Daniel|||0000-0003-1325-9161
  • Lechuga, Laura M.|||0000-0001-5187-5358
The development of devices for sensing and monitoring CO levels is crucial for many fields such as food packaging and for human safety indoors. Herein the fabrication of an optical CO sensor by integration of a metal-organic framework (MOF) onto bimodal optical waveguides is reported. This sensor is constructed via self-assembly of a transparent film of zeolitic imidazolate framework-8 (ZIF-8) nanoparticles (size: 32 ± 5 nm) on the waveguides. The nanoZIF-8-based sensor exhibits a broad linear response, with limits of detection of 3130 ppm at room temperature and 774 ppm at 278 K. Furthermore, it is robust, selective, fast and reusable, and can be stored under humid conditions with no loss in performance.