Pasar al contenido principal

MATERIALES ESTRUCTURADOS PARA APLICACIONES FOTONICAS, OPTOMECANICAS Y TERMICAS

RTI2018-093921-B-C41

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large area metasurfaces made with spherical silicon resonators

  • Molet, Pau
  • Gil Herrera, Luz Karimé
  • García Pomar, Juan Luis
  • Caselli, Niccolò
  • Blanco Montes, Álvaro
  • López, Cefe
  • Mihi, Agustín
High-index dielectric nanostructures have emerged as an appealing complement to plasmonic nanostructures, offering similar light management capabilities at the nanoscale but free from the inherent optical losses. Despite the great interest in these all-dielectric architectures, their fabrication still requires cumbersome fabrication techniques that limit their implementation in many applications. Hence, the great interest in alternative scalable procedures. Among those, the fabrication of silicon spheres is at the forefront, with several routes available in the literature. However, the exploitation of the Mie modes sustained by these silicon resonators is limited over large areas by polydispersity or a lack of long-range order. Here, we present an all-dielectric metamaterial fabricated with a low cost and highly scalable technique: a combination of soft imprinting nanolithography and chemical vapor deposition. The resulting all-dielectric metasurface is composed of an array of silicon hemispheres on top of a high refractive index dielectric substrate. This architecture allows the exploitation of high-quality Mie resonances at a large scale due to the high monodispersity of the hemispheres organized in a single crystal two-dimensional lattice. The optical response of the metasurface can be engineered by the design parameters of the nanoimprinted structure. We further demonstrate the potential of this platform to enhance light emission by coupling dye molecules to the sustained Mie resonances and measuring both an eight-fold amplified signal and a triple lifetime reduction., We greatly acknowledge financial support from the Spanish Ministry of Science, Innovation and Universities with projects MAT2016-79053-P and RTI2018-093921-B-C41 and the excellence program SEV-2015-0496; Generalitat de Catalunya program AGAUR 2017-SGR-00488; and the European Research Council under the European Union’s Horizon 2020 research and innovation program (grant number 637116, Funder Id: http://dx.doi.org/10.13039/100010663). P.M acknowledges financial support from an FPI contract (2017) of the MICINN (Spain) cofounded by the ESF and UAB school doctoral program. L.K.G. acknowledges a COLCIENCIAS doctoral grant. N.C. acknowledges the JdlC programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Self-Assembled 2D Thermofunctional Material for Radiative Cooling

  • Jaramillo-Fernandez, Juliana
  • Whitworth, Guy L.
  • Pariente González, J. Ángel
  • Blanco Montes, Álvaro
  • García Fernández, Pedro David
  • López, Cefe
  • Sotomayor Torres, C. M.
[EN] The regulation of temperature is a major energy-consuming process of humankind. Today, around 15% of the global-energy consumption is dedicated to refrigeration and this figure is predicted to triple by 2050, thus linking global warming and cooling needs in a worrying negative feedback-loop. Here, an inexpensive solution is proposed to this challenge based on a single layer of silica microspheres self-assembled on a soda-lime glass. This 2D crystal acts as a visibly translucent thermal-blackbody for above-ambient radiative cooling and can be used to improve the thermal performance of devices that undergo critical heating during operation. The temperature of a silicon wafer is found to be 14 K lower during daytime when covered with the thermal emitter, reaching an average temperature difference of 19 K when the structure is backed with a silver layer. In comparison, the soda-lime glass reference used in the measurements lowers the temperature of the silicon by just 5 K. The cooling power of this simple radiative cooler under direct sunlight is found to be 350 W m when applied to hot surfaces with relative temperatures of 50 K above the ambient. This is crucial to radiatively cool down devices, i.e., solar cells, where an increase in temperature has drastic effects on performance., The European Union’s Horizon 2020 research and innovation program under the Marie Sklodoswa-Curie grant agreement N 665919 supported J.J.-F. and funded this project. Moreover, the research received funds from the Spanish Minister of Science, Innovation and Universities via the Severo Ochoa Program (Grant No. SEV-2017-0706), RTI2018-093921-B-C41 and RTI2018-093921-A-C44 (SMOOTH), as well as by the CERCA Program/Generalitat de Catalunya. P.D.G. was supported by a Ramon y Cajal fellowship nr. RyC-2015-18124. J.J
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Silicon-Based Photonic Architectures from Hierarchically Porous Carbon Opals

  • Gil-Herrera, Luz Karime
  • Gallego-Gómez, Francisco
  • Torres-Pardo, Almudena
  • González-Calbet, José M.
  • Palomares, F. Javier
  • Blanco Montes, Álvaro
  • Juárez, Beatriz H.
  • López, Cefe
[EN] Silicon-based materials are needed in cutting-edge technological fields, for which hierarchical porosity and photonic properties help improve performance. In this work, the versatility of several fabrication routes that combine silicon infiltration by chemical vapor deposition (CVD), reactive ion etching (RIE), and carbon calcination, which produce a palette of novel silicon-based material architectures, is demonstrated. Design strategies are discussed and the main features of the processing steps are addressed to provide a variety of new silicon-based materials with high morphological versatility and photonic quality. Three-dimensional hollow carbon opals (HCO) permit control of the porosity of subsequent architectures through the initial silicon infiltration, while open or closed surfaces are achieved primarily as a function of RIE conditions. The composition of derived structures depends on the sequence in which the processes are applied. As a result, pure Si and hybrid C–Si inverse structures can be produced with open or closed spheres in the top layer and with an optional passivation layer. Remarkably, by properly choosing the Si infiltration parameters and the calcination/RIE procedure, final structures are achieved with double-shell spheres., This work was partially funded by the Spanish MCIU CSIC13-4E-1794, MAT2014-58731-JIN, MAT2016-80394-R, MAT2017-85617-R and RTI2018-093921-B-C41 and the excellence programs MDM-2014-0377 and SEV- 2016-0686. The authors acknowledge the service from the MiNa Laboratory at IMN, and funding from Comunidad de Madrid project S2018/NMT-4291 (TEC2SPACE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Micropore Filling and Multilayer Formation in Stöber Spheres upon Water Adsorption

  • Gallego-Gómez, Francisco
  • Farrando-Pérez, Judit
  • López, Cefe
  • Silvestre-Albero, Joaquín
The presence of porosity critically affects the performance of solid systems. The pore accessibility to adsorbate molecules and the corresponding adsorption/desorption behavior are crucial aspects to understand the properties of porous materials but are difficult to address, principally when dealing with narrow micropores. A prominent example is colloidal silica (Stöber) spheres whose microporosity, inaccessible for some adsorbates, can be readily filled by water molecules to a large extent but exhibiting a complex adsorption behavior with unexpected hystereses. Here, we perform water adsorption isotherms on Stöber spheres at different temperatures using an original analysis of the Dubinin-Radushkevich representation to examine both the accessibility to the microporosity and the formation of water multilayers on the outer sphere surface. The micropore filling (and emptying) is found to be limited by the kinetic energy of the water molecules, causing low-pressure hysteresis. We further discover that the (temperature-dependent) completion of the micropore filling delays the onset of multilayer adsorption, leading to hysteresis at a high relative pressure. The number of adsorbed water layers is determined, and the adsorption-induced swelling of the spheres is discussed., This work was funded by Spanish MINECO projects MAT2014-58731-JIN and MAT2016-80285-p, and Spanish MCIU project RTI2018-093921-B-C41.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Imbibition and dewetting of silica colloidal crystals: An NMR relaxometry study

  • Gallego-Gómez, Francisco
  • Cadar, Calin
  • López, Cefe
  • Ardelean, Ioan
[EN] Hypothesis: The wettability of the inner surfaces in a porous network is challenging to be accessed but essential to understand the complex performance of e.g. particulate systems. Experiments: Here we investigate the water behavior in the macroporous (50–100 nm) voids of dense particle packings by performing low-field H NMR relaxometry in solid silica colloid crystals. The systems chosen guarantee a regular, known void size distribution with controllable water affinity (through thermal annealing), where the NMR experiment clearly discriminates the void water from micropore or bound water contributions, allowing separate monitoring. Findings: Analysis of the saturated state indicates that the interparticle voids are completely filled after imbibition, even for less hydrophilic spheres. Due to the interaction with the silica surface, proton relaxation in void water is up to 100 times faster than that in bulk water, serving for assessment of the hydrophilicity within the sample. The relaxation time evolution upon dewetting provides an empirical measurement of the wettability inside the ensemble, revealing a progressively inhomogeneous wetting of increasingly hydrophobic surfaces. Our results provide insight into the imbibition state and dewetting performance in meso- and macroporous systems, with emphasis in the marked influence of the surface nature on the pore wetting distribution., This work was supported by the Spanish MINECO project MAT2014- 58731-JIN and MCIU grant RTI2018-093921-B-C41. I. A. acknowledges the partial support of the project 21 PFE in the frame of the program PDIPFE- CDI 2018.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Simulations of micro-sphere/shell 2D silica photonic crystals for radiative cooling

  • Whitworth, Guy L.
  • Jaramillo-Fernandez, Juliana
  • Pariente González, J. Ángel
  • García Fernández, Pedro David
  • Blanco Montes, Álvaro
  • López, Cefe
  • Sotomayor Torres, C. M.
Passive daytime radiative cooling has recently become an attractive approach to address the global energy demand associated with modern refrigeration technologies. One technique to increase the radiative cooling performance is to engineer the surface of a polar dielectric material to enhance its emittance atwavelengths in the atmospheric infrared transparency window (8-13 ìm) by outcoupling surface-phonon polaritons (SPhPs) into free-space. Here we present a theoretical investigation of new surface morphologies based upon self-assembled silica photonic crystals (PCs) using an in-house built rigorous coupled-wave analysis (RCWA) code. Simulations predict that silica micro-sphere PCs can reach up to 73 K below ambient temperature, when solar absorption and conductive/convective losses can be neglected. Micro-shell structures are studied to explore the direct outcoupling of the SPhP, resulting in near-unity emittance between 8 and 10 ìm. Additionally, the effect of material composition is explored by simulating soda-lime glass micro-shells, which, in turn, exhibit a temperature reduction of 61 K below ambient temperature. The RCWA code was compared to FTIR measurements of silica micro-spheres, self-assembled on microscope slides., Horizon 2020 Framework Programme (721062); H2020 Marie Skłodowska-Curie Actions (665919); Ministerio de Ciencia, Innovación y Universidades (PGC2018-101743-B-I00, RTI2018-093921-B-C41, SEV-2017-0706, RTI2018-093921-B-44, RyC-2015-18124, FPI programme); Centres de Recerca de Catalunya.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Simulations of micro-sphere/shell 2D silica photonic crystals for radiative cooling

  • Whitworth, Guy L.|||0000-0002-5060-6946
  • Jaramillo Fernández, Juliana|||0000-0002-4787-3904
  • Pariente, Jose Angel|||0000-0003-2649-9164
  • Garcia, Pedro David
  • Blanco, Alvaro|||0000-0002-0015-4873
  • Lopez, Cefe
  • Sotomayor Torres, Clivia M.|||0000-0001-9986-2716
Passive daytime radiative cooling has recently become an attractive approach to address the global energy demand associated with modern refrigeration technologies. One technique to increase the radiative cooling performance is to engineer the surface of a polar dielectric material to enhance its emittance atwavelengths in the atmospheric infrared transparency window (8-13 ìm) by outcoupling surface-phonon polaritons (SPhPs) into free-space. Here we present a theoretical investigation of new surface morphologies based upon self-assembled silica photonic crystals (PCs) using an in-house built rigorous coupled-wave analysis (RCWA) code. Simulations predict that silica micro-sphere PCs can reach up to 73 K below ambient temperature, when solar absorption and conductive/convective losses can be neglected. Micro-shell structures are studied to explore the direct outcoupling of the SPhP, resulting in near-unity emittance between 8 and 10 ìm. Additionally, the effect of material composition is explored by simulating soda-lime glass micro-shells, which, in turn, exhibit a temperature reduction of 61 K below ambient temperature. The RCWA code was compared to FTIR measurements of silica micro-spheres, self-assembled on microscope slides.