Pasar al contenido principal

PROPAGACION DE ONDAS DE ESPIN EN MATERIALES METALICOS NANOESTRUCTURADOS DE BAJO AMORTIGUAMIENTO PRECESIONAL PARA LA IMPLEMENTACION DE UN DISPOSITIVO MAGNONICO DE PRUEBA

MAT2016-80394-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

DIGITAL.INTA Repositorio Digital del Instituto Nacional de Técnica Aeroespacial
Publicación Artículo científico (JournalArticle)

Antiphase resonance at X-ray irradiated microregions in amorphous Fe80B20 stripes

  • Urdiroz, U.
  • Gómez, Alicia
  • Magaz, M.
  • Granados, D.
  • Sánchez Agudo, M.
  • Rubio Zuazo, J.
  • Castro, G. R.
  • Stan, C.
  • Tamura, N.
  • Padmore, H. A.
  • Müller, C.
  • McCord, J.
  • Cebollada, F.
  • Palomares, F. J.
  • González, J. M.
Highlights X-ray irradiation of amorphous stripes allows to stabilize a transverse 180o wall. An inhomogeneous resonance can be excited with a 180° phase-shift across the wall. That phase-shift can be exploited into the design of magnonic devices., We report on the induction, through X-ray irradiation, of local anisotropy modifications in amorphous Fe80B20 stripes prepared by laser lithography from 15 nm thick films deposited by pulsed laser ablation. Those anisotropy modifications, taking place in a zone having a dimension of 15 μm around the X-ray beam (2 µm width) incidence area center point, lead to an effective transverse-to-the-stripe long axis local magnetic easy axis that can be exploited to stably localize a 180° domain wall, in remanence after saturation with a transverse-to the stripe easy axis dc field. Upon stabilizing that wall it is possible to excite spatially inhomogeneous ferromagnetic resonances nearby the irradiated region (IR). The time dependencies of the magnetization precession at both sides of the IR exhibit a uniform phase shift of 180° over distances of the order of 20 μm from the stabilized domain wall., This work has been developed with funds corresponding to project MAT2016-80394-R financed by the Spanish Research Agency (AEI). We also acknowledge the Spanish Ministerio de Ciencia e Innovaci ' on and Consejo Superior de Investigaciones Cientificas for financial support and for provision of synchrotron radiation at beamline BM25-SpLine (ESRF). This research used resources of the Advanced Light Source, a DOE Office of Science User Facility under contract no. DE-AC02-05CH11231. FC and JMG would like to dedicate this work to the memory of Dr. Dominique Givord with gratitude for the many things they were able to learn from him, Peerreview
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the medium composition on the Zn2+ lixiviation and the antifouling properties of a glass with a high ZnO content

  • Esteban-Tejeda, Leticia
  • Palomares, F. Javier
  • Cabal, Belén
  • López-Píriz, Roberto
  • Fernández, Adolfo
  • Sevillano, David
  • Alou, Luis
  • Torrecillas, Ramón
  • Moya, J. S.
The dissolution of an antimicrobial ZnO-glass in the form of powder and in the form of sintered pellets were studied in water, artificial seawater, biological complex media such as common bacterial/yeast growth media (Luria Bertani (LB), yeast extract, tryptone), and human serum. It has been established that the media containing amino acids and proteins produce a high lixiviation of Zn2+ from the glass due to the ability of zinc and zinc oxide to react with amino acids and proteins to form complex organic compounds. The process of Zn2+ lixiviation from the glass network has been studied by X-ray photoelectron spectroscopy (XPS). From these results we can state that the process of lixiviation of Zn2+ from the glass network is similar to the one observed in sodalime glasses, where Na+ is lixiviated to the media first and the fraction of Zn that acts as modifiers (~2/3) is lixiviated in second place. After the subsequent collapse of the outer surface glass layer (about 200–300 nm thick layer) the dissolution process starts again. Antifouling properties against different bacteria (S. epidermidis, S. aureus, P. aeruginosa, E. coli, and M. lutea) have also been established for the glass pellets., FJP acknowledges the support from the “Ministerio de Ciencia e Innovacion” (MICINN, Spain) through the grant MAT2016-80394-R. Belén Cabal acknowledges financial support from Jovellanos program (IDEPA, cofounded by FEDER)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Core@shell, Au@TiOx nanoparticles by gas phase synthesis

  • Martínez Orellana, Lidia
  • Mayoral, Álvaro
  • Espiñeira, Martín
  • Román García, Elisa Leonor
  • Palomares, F. Javier
  • Huttel, Yves
Herein, gas phase synthesis and characterization of multifunctional core@shell, Au@TiOx nanoparticles have been reported. The nanoparticles were produced via a one-step process using a multiple-ion cluster source under a controlled environment that guaranteed the purity of the nanoparticles. The growth of the Au cores (6 nm diameter) is stopped when they pass through the Ti plasma where they are covered by an ultra-thin (1 nm thick) and homogeneous titanium shell that is oxidized in-flight before the soft-landing of the nanoparticles. The Au cores were found to be highly crystalline with icosahedral (44%) and decahedral (66%) structures, whereas the shell, mainly composed of TiO2 (79%), was not ordered. The highly electrical insulating behaviour of the titanium oxide shell was confirmed by the charging effect produced during X-ray photoemission spectroscopy., This work was supported by the European ERC-2013-SyG 610256 NANOCOSMOS and European Union Seventh Framework Programme under grant agreement no. 604391 FET Graphene Flagship and by the Spanish Ministerio de Ciencia e Innovación under projects no. MAT2014-59772-C2-2-P and MAT2016-80394-R. A. M. acknowledges the Government of Aragon and the European Social Fund under the project grant number E/26 “Construyendo Europa desde Aragón” 2014–2020., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly selective covalent organic functionalization of epitaxial graphene

  • Aceituno Bueno, Rebeca
  • Martínez, José I.
  • Luccas, Roberto F.
  • Ruiz del Árbol, Nerea
  • Munuera, C.
  • Palacio, Irene
  • Palomares, F. Javier
  • Lauwaet, Koen
  • Thakur, Sangeeta
  • Baranowski, Jacek M.
  • Strupinski, Wlodek
  • López, María Francisca
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Martín-Gago, José A.
Graphene functionalization with organics is expected to be an important step for the development of graphene-based materials with tailored electronic properties. However, its high chemical inertness makes difficult a controlled and selective covalent functionalization, and most of the works performed up to the date report electrostatic molecular adsorption or unruly functionalization. We show hereafter a mechanism for promoting highly specific covalent bonding of any amino-terminated molecule and a description of the operating processes. We show, by different experimental techniques and theoretical methods, that the excess of charge at carbon dangling-bonds formed on single-atomic vacancies at the graphene surface induces enhanced reactivity towards a selective oxidation of the amino group and subsequent integration of the nitrogen within the graphene network. Remarkably, functionalized surfaces retain the electronic properties of pristine graphene. This study opens the door for development of graphene-based interfaces, as nano-bio-hybrid composites, fabrication of dielectrics, plasmonics or spintronics., The research leading to these results has received funding from the Spanish MINECO (through Grants No. MAT2014-54231-C4-1-P, MAT2016-80394-R, RYC-2014-16626 and RYC-2015-17730), from the EU via the ERC-Synergy Program (Grant No. ERC-2013-SYG-610256 Nanocosmos) and the European Union Seventh Framework Program (Grant No. 604391 Graphene Flagship), and from the Comunidad Autónoma de Madrid (CAM) via the MAD2D-CM Program (Grant No. S2013/MIT-3007). We also thank the computing resources from CTI-CSIC. R.L. acknowledges financial support from Spanish MINECO under Grant agreement No. CONSOLIDER INGENIO CSD2009-00013., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Myelinated axons and functional blood vessels populate mechanically compliant rGO foams in chronic cervical hemisected rats

  • Domínguez-Bajo, Ana
  • González-Mayorga, Ankor
  • Guerrero, Carlos R.
  • Palomares, F. Javier
  • García-González, Ricardo
  • López-Dolado, Elisa
  • Serrano, María C.
Neural diseases at the central nervous system including spinal cord injury (SCI) remain therapeutic challenges. Graphene materials are being delineated as alternative tools for neural repair. Herein, the regenerative ability of reduced graphene oxide (rGO) scaffolds to support pivotal features of neural repair at 4 months after SCI is assessed by an interdisciplinary approach. 3D randomly porous foams have been prepared in mechanical compliance with neural cells and tissues (Young's modulus of 1.3 ± 1.0 kPa) as demonstrated by atomic force microscopy techniques applied ex vivo. After implantation, the significant increase in Young's modulus caused by massive cell/protein infiltration does not alter the mechanical performance of the contralateral spinal cord but provides mechanical stability to the lesion. These aerogels appear fully vascularized and populated with neurites, some of them being myelinated excitatory axons. Clinically-inspired magnetic resonance imaging studies demonstrate that the scaffolds significantly reduce perilesional damage with respect to rats without implants and cause no compressive damage in the contralateral hemicord and rostral/caudal regions. The rGO implants do not either alter the rat spontaneous behaviour or induce toxicity in major organs. Finally, preliminary data suggest hints of rGO sheets dissociation and eventual degradation at the injured spinal cord for the first time. In summary, these 3D porous rGO scaffolds are able to induce, without any further biological functionalization, a compilation of positive effects that have been rarely described before, if ever, for any other material implanted in the injured spinal cord to date., This work was supported by the Ministerio de Economía y Competitividad and the Fondo Europeo de Desarrollo Regional (MAT2016-78857-R, MAT2016-76507-R and MAT2016-80394-R, MINECO/FEDER, UE) and the European Research Council ERC-AdG-340177 (3DNanoMech)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Dataset of the publication "Myelinated axons and functional blood vessels populate mechanically compliant rGO foams in chronic cervical hemisected rats"

  • Domínguez-Bajo, Ana
  • González-Mayorga, Ankor
  • Guerrero, Carlos R.
  • Palomares, F. Javier
  • García García, Ricardo
  • López-Dolado, Elisa
  • Serrano, María C.
The copyright of the content of this dataset belongs to the authors of the article indicated above. Permission must be requested to the authors for the reproduction and/or use of any parts of this dataset. Access to this dataset has been made public through the use of the public repository of CSIC (DIGITAL.CSIC). For any further questions, please contact the corresponding author of the article at mc.terradas@csic.es, Spinal cord injury (SCI) remain a therapeutic challenge. In this work, we have explored the regenerative ability of reduced graphene oxide (rGO) scaffolds to support pivotal features of neural repair at 4 months after SCI. 3D randomly porous foams have been prepared in mechanical compliance with neural cells and tissues. After 4 months, these scaffolds are fully vascularized and populated with neurites, some of them identified as myelinated excitatory axons. Magnetic resonance imaging studies demonstrate reduce perilesional damage in the presence of the scaffolds. In summary, these 3D porous rGO scaffolds are able to induce a compilation of positive effects that have been rarely described before, if ever, for any other material implanted in the injured spinal cord. The techniques used in this study include: immunofluorescence, scanning electron microscopy, atomic force microscopy, transmission electron microscopy, confocal laser scanning microscopy, histology, behavioral tests, magnetic resonance imaging, and X-ray photoelectron spectroscopy., This work was supported by the Ministerio de Economía y Competitividad and the Fondo Europeo de Desarrollo Regional (MAT2016-78857-R, MAT2016-76507-R and MAT2016-80394-R, MINECO/FEDER, UE) and the European Research Council ERC-AdG-340177 (3DNanoMech)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning the size, composition and structure of Au and Co50Au50 nanoparticles by high-power impulse magnetron sputtering in gas-phase synthesis

  • Mayoral, Álvaro
  • Martínez Orellana, Lidia
  • García-Martín, José Miguel
  • Fernández-Martínez, I.
  • García-Hernández, Mar
  • Galiana, Beatriz
  • Ballesteros Pérez, Carmen Inés
  • Huttel, Yves
Gas-phase synthesis of nanoparticles with different structural and chemical distribution is reported using a circular magnetron sputtering in an ion cluster source by applying high-power impulses. The influence of the pulse characteristics on the final deposit was evaluated on Au nanoparticles. The results have been compared with the more common direct current approach. In addition, it is shown for the first time that high-power impulses in magnetron based gas aggregation sources allows the growth of binary nanoparticles, CoAu in this case, with a variety of crystalline and chemical arrangements which are analyzed at the atomic level., This work was supported by the EU agreement No. 696656 (GrapheneCore1-Graphene-based disruptive technologies), Spanish Ministerio de Economía, Industria y Competitividad under project MAT2014-59772-C2-1-P, Spanish Ministerio de Economía, Industria y Competitividad under project MAT2014-59772-C2-2-P, Spanish Ministerio de Economía, Industria y Competitividad under project MAT2016-80394-R, ERC-2013-SyG 610256 NANOCOSMOS., National Science Foundation of China (21850410448), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Phase selectivity in Cr and N Co-Doped TiO2 films by modulated sputter growth and post-deposition flash-lamp-annealing

  • Gago, Raúl
  • Prucnal, Slawomir
  • Hübner, René
  • Munnik, Frans
  • Esteban-Mendoza, David
  • Jiménez, Ignacio
  • Palomares, F. Javier
In this paper, we report on the phase selectivity in Cr and N co-doped TiO2 (TiO2:Cr,N) sputtered films by means of interface engineering. In particular, monolithic TiO2:Cr,N films produced by continuous growth conditions result in the formation of a mixed-phase oxide with dominant rutile character. On the contrary, modulated growth by starting with a single-phase anatase TiO2:N buffer layer, can be used to imprint the anatase structure to a subsequent TiO2:Cr,N layer. The robustness of the process with respect to the growth conditions has also been investigated, especially regarding the maximum Cr content (<5 at.%) for single-phase anatase formation. Furthermore, post-deposition flash-lamp-annealing (FLA) in modulated coatings was used to improve the as-grown anatase TiO2:Cr,N phase, as well as to induce dopant activation (N substitutional sites) and diffusion. In this way, Cr can be distributed through the whole film thickness from an initial modulated architecture while preserving the structural phase. Hence, the combination of interface engineering and millisecond-range-FLA opens new opportunities for tailoring the structure of TiO2-based functional materials., The research leading to these results has received funding from projects RTI2018-095137-B-I00 and MAT2016-80394-R from Ministerio de Ciencia, Innovación y Universidades (Spain) and grant agreement n° 226716 from the European Community’s Seventh Framework Programme (FP7/2007-2013). Funding of TEM Talos F200X by the German Federal Ministry of Education of Research (BMBF) through Grant No. 03SF0451 in the framework of HEMCP is gratefully acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Press-transferred carbon black nanoparticles for class-selective antioxidant electrochemical detection

  • Pelle, Flavio Della
  • Battista, Roberto di
  • Vázquez Burgos, Luis
  • Palomares, F. Javier
  • Carlo, Michele del
  • Sergi, Manuel
  • Compagnone, Dario
  • Escarpa, Alberto
Carbon black nanoparticles (CBNPs) press imprinted films are proposed for class-selective electrochemical detection of ortho-diphenols (o-diphenols) and mono-phenols (m-phenols) antioxidants. In order to optimize the sensor construction, different surface immobilizations of CBNPs electroactive films on a PMMA support were assayed by using different amounts of CBNPs dispersions. The best sensor in terms of selectivity, sensitivity and stability was obtained when 30 mL of a CBNPs dispersion (0.50 mg/100 mL in 1,2-dichloroethane) were transferred onto PMMA substrates applying a pressure of 4.6 ton. The electrodes were characterized by Electrochemical Impedance Spectroscopy (EIS) and Cyclic Voltammetry (CV) to explore their electrical properties. The effective transfer of CBNPs on the PMMA support and the CBNPs film conductivity have been evaluated by Atomic Force Microscopy (AFM) confirming that the carbon black film is effectively imprinted on the polymer surface and that retains its good conductivity. X-ray Photoelectron Spectroscopy (XPS) and Raman spectroscopy have been employed to investigate the CBNPs composition and the CBNPs electrode surface, respectively. CBNPs electrodes exclusively supported the o-diphenols and m-phenols sensing, at low detection potentials (+0.100 and +0.560 V, respectively) and with negligible surface fouling (peak intensity RSDs <12% and oxidation potential <6%, n = 28). Class-selective electrochemical indexes (EIs) for o-diphenols and m-phenols are proposed for the evaluation of the phenols antioxidant contents in complex samples such as olive oils., E and LV acknowledge financial support from the Spanish Ministry of Economy and Competitiveness (CTQ2014-58643-R and BIO2016-79618-R, respectively), and the NANOAVANSENS program (S2013/MIT-3029) from the Community of Madrid. The Authors acknowledge the financial contribution of the Italian Ministry of Foreign Affairs for the Project “Materiali nanostrutturati per sistemi (bio)chimici sensibili ai pesticidi”. This research has also been financed by the “Spanish Ministry of Economy and Competitiveness (MINECO) under projects MAT2016-80394-R (FJP), MAT2014-54231-C4-1-P (LV).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable plasmonic resonance of gallium nanoparticles by thermal oxidation at low temperatures

  • Catalán-Gómez, S.
  • Redondo-Cubero, A.
  • Palomares, F. Javier
  • Nucciarelli, F.
  • Pau, J.L.
The effect of the oxidation of gallium nanoparticles (Ga NPs) on their plasmonic properties is investigated. Discrete dipole approximation has been used to study the wavelength of the out-of-plane localized surface plasmon resonance in hemispherical Ga NPs, deposited on silicon substrates, with oxide shell (GaO) of different thickness. Thermal oxidation treatments, varying temperature and time, were carried out in order to increase experimentally the GaO shell thickness in the NPs. The optical, structural and chemical properties of the oxidized NPs have been studied by spectroscopic ellipsometry, scanning electron microscopy, grazing incidence x-ray diffraction and x-ray photoelectron spectroscopy. A clear redshift of the peak wavelength is observed, barely affecting the intensity of the plasmon resonance. A controllable increase of the GaO thickness as a consequence of the thermal annealing is achieved. In addition, simulations together with ellipsometry results have been used to determine the oxidation rate, whose kinetics is governed by a logarithmic dependence. These results support the tunable properties of the plasmon resonance wavelength in Ga NPs by thermal oxidation at low temperatures without significant reduction of the plasmon resonance intensity., This research is supported by the MINECO (CTQ2014-53334-C2-2-R and MAT2016-80394-R) and Comunidad de Madrid (NANOAVANSENS ref. S2013/MIT-3029) projects. ARC acknowledges Ramón y Cajal program (under contract number RYC-2015-18047). FN acknowledges support from Marie Sklodowska-Curie grant agreement No 641899 from the European Union's Horizon 2020 research and innovation programme.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultra-thin NaCl films as protective layers for graphene

  • Palacio, Irene
  • Lauwaet, Koen
  • Vázquez Burgos, Luis
  • Palomares, F. Javier
  • González-Herrero, Héctor
  • Martínez, José I.
  • Aballe, Lucía
  • Foerster, Michael
  • García-Hernández, Mar
  • Martín-Gago, José A.
The ageing of graphene is an important issue for technological applications. Capping layers are a good way of circumventing this problem. In this work, we propose the use of ultra-thin NaCl films as easilyremovable protective layers. We have carried out a detailed characterization of the NaCl/graphene interface on metal substrates, namely Cu(111) and Ir(111), by means of complementary microscopies, electron diffraction and spectroscopic techniques. Interestingly, we show that NaCl neither interacts in a chemical way with graphene nor intercalates through it. We demonstrate that the NaCl film is stable under ambient conditions, protecting the graphene surface from oxidation. In addition, after removing the protective layer, graphene remains intact., This work has been supported by the EU Graphene Flagship funding (Grant Graphene Core2 785219), the Spanish MINECO (MAT2017-85089-C2-1R, MAT2016-80394-R and RYC-2015-17730) and the EU via the ERC-Synergy Program (Grant ERC-2013-SYG-610256 NANOCOSMOS) and the European Structural Funds via FotoArt-CM project (P2018/NMT-4367)., We acknowledge support of the publication fee by the CSIC Open Access Support Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unexpected optical blue shift in large colloidal quantum dots by anionic migration and exchange

  • Acebrón, María
  • Galisteo-López, Juan F.
  • López, Cefe
  • Herrera, Facundo C.
  • Mizrahi, Martín
  • Requejo, Félix G.
  • Palomares, F. Javier
  • Juárez, Beatriz H.
Compositional changes taking place during the synthesis of alloyed CdSeZnS nanocrystals (NCs) allow shifting of the optical features to higher energy as the NCs grow. Under certain synthetic conditions, the effect of those changes on the surface/interface chemistry competes with and dominates over the conventional quantum confinement effect in growing NCs. These changes, identified by means of complementary advanced spectroscopic techniques such as XPS (X-ray photoelectron spectroscopy) and XAS (X-ray absorption spectroscopy), are understood in the frame of an ion migration and exchange mechanism taking place during the synthesis. Control over the synthetic routes during NC growth represents an alternative tool to tune the optical properties of colloidal quantum dots, broadening the versatility of the wet chemical methods., This work has been partially supported through the following projects: S2013/MIT-2740 from Comunidad de Madrid and FIS2015-67367-C2-1-P and MAT2016-80394-R from the Spanish Ministry of Economy and Competitiveness. F.C.H., M.M., and F.G.R. acknowledge CONICET and ANPCYT (Project PICT 2015-2285). XAFS experiments were partially supported by Projects XAFS2-20170359 and SXS-20160690 (LNLS, Campinas, Brazil).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improvement in heavy metal removal from wastewater using an external magnetic inductor

  • Rivera, Fernanda Lyzeth
  • Palomares, F. Javier
  • Herrasti, Pilar
  • Mazarío, Eva
Magnetite nanoparticles (Fe3O4) of 12 ± 4 nm diameter are electrochemically synthesized for the adsorption and magnetic harvesting of Cr(VI) from contaminated simulated solutions. The removal of Cr(VI) from aqueous media follows pseudo-second-order kinetics. The adsorption efficiency is evaluated in three different scenarios. In standard conditions, i.e., at room temperature; in a thermal bath working at 60 °C, where the temperature could be considered homogeneous within the solution; and finally, under magnetic induction heating, while adjusting the frequency and magnetic field used to attain the same temperature as in the bath experiments. Two benefits of using a magnetic inductor are demonstrated. First, the removal efficiency is almost doubled in comparison to that of the room temperature experiments, and it is higher by 30% compared to that of the bath setup. At the same time as the adsorption occurs, a redox reaction occurs on the surface of the nanoparticles, and Cr(VI), the predominant species in the contaminated solution, is significantly reduced to Cr(III). Through X-ray photoelectron spectroscopy, it is shown that a greater reduction effect is achieved when working in induction conditions than at room temperature. This is the first time that this synergistic effect using magnetic induction heating has been demonstrated for heavy metal decontamination of wastewater., This research was funded by the Spanish Ministry of Economy and Competitiveness under projects MAT2016-80394-R and PGC2018-095642-B-I00. The authors also thanks to the Consejo Nacional de Ciencia y Tecnología de Mexico (CONACYT) for the scholarship 709903., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low temperature superspin glass behavior in a Co/Ag multilayer

  • Navarro, Enrique
  • Alonso, María
  • Ruiz, A.
  • Magén, César
  • Urdiroz, Unai
  • Cebollada, F.
  • Balcells, Lluis
  • Martínez Perea, Benjamín
  • Palomares, F. Javier
  • González Fernández, Jesús María
This paper was presented at the 64th Annual Conference on Magnetism and Magnetic Materials., We report on the low temperature magnetic behavior of an epitaxially grown multilayer formed by 32 repetitions of a nominal period corresponding to 1 monolayer (ML) Co and 16 ML Ag. The study of the magnetic properties was based on the measurement of the temperature dependencies of the dc magnetization upon field cooling (FC) and zero field cooling (ZFC) and of the ac field real and imaginary parts of the susceptibility. From our results we conclude about the occurrence of i) a well-defined bilayers stacking sequence matching the nominal one, ii) a discontinuous growth in the Co layers resulting on close-to-monodisperse, spherical Co nanoparticles having an average diameter of 1.6 nm, iii) a frequency dependent peak in the temperature dependence of the real part of the ac susceptibility exhibiting a per decade relative temperature variation of 4.5 x 10−2, iv) an applied dc field, Hdc, variation of the temperature at which the irreversibility is detected in the FC/ZFC curves corresponding to the Almeida-Thouless prediction, and v) a critical behavior characterized by a glass-transition temperature slightly below the peak temperatures observed at low frequency in the temperature dependence of the ac susceptibility and a dynamic scaling exponent in the range of the values usually obtained for spin glass systems. From our results we conclude that i) our sample experiences a superspin-glass/paramagnetic phase transition, ii) the interactions mediating the spin glass freezing process are the dipolar ones taking place among the Co particles (creating fields at the average interparticle distance of the order of 8 x 105 A/m) which provide competitiveness that combined with the reduced amount of disorder built-in the Co layers results on frustration., The authors gratefully acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness and the Spanish Research Agency under grant no. MAT2016-80394-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Superspin glass behavior of Co nanocrystal arrays in MBE-grown Co/Ag multilayers

  • Navarro, Enrique
  • Alonso, María
  • Ruiz, A.
  • Magén, César
  • Urdiroz, Unai
  • Cebollada, F.
  • Balcells, Lluis
  • Martínez Perea, Benjamín
  • Palomares, F. Javier
  • González Fernández, Jesús María
Resumen del póster presentado al 10th International Symposium on Metallic Multilayers (MML), celebrado en Madrid (España) del 17 al 21 de junio de 2019., Superspin glass (SSG) magnetic order has been often reported for granular metallic alloys, where a high degree of disorder in the magnetic particles positions constitutes a key ingredient of the collective behavior. Granular multilayers would in principle offer a reduced disorder in comparison to granular solids, due to the stacking periodicity. In fact, SSG behavior has been also reported for discontinuous metal-insulator multilayers, although we are not aware of similar SSG reports for metallic multilayers. In the present investigation we study the structure and magnetic properties of granular Co/Ag multilayers grown by molecular beam epitaxy (MBE) on MgO(001) substrates. The nominal thickness of the Co layers was 0.5 and 1 monolayers (ML) and that of Ag layers was 8 ML and 16 ML. X-ray reflectivity and diffraction measurements confirmed that a clear superlattice periodicity was built in the samples, see Fig.1. The cross-section transmission electron microscopy (TEM) images also illustrate a well-defined multilayer sequence and show that Co layers are discontinuous, presenting a highly monodisperse Co particle distribution. The magnetometry (VSM and SQUID) and acsusceptibility studies indicated that these multilayers exhibited hysteresis below temperatures in the range 5 - 20 K, magnetization not saturable at fields of up to 6 T, and sharp peaks in the zero-field cooling dc- and ac- susceptibility curves at low temperatures (Tp). The frequency dependence of Tp in the ac- curves can be explained according to the Vogel-Fulcher law and yielded values of the frequency shift parameter Γ in the range 0.04-0.05. Henkel plots indicated demagnetizing interactions at the whole field range of the magnetization process. Hence, we conclude that, below the critical temperatures identified from the ac- susceptibility curves, our samples behave as a SSG, originated by the interparticle dipolar interactions. The degree of disorder within the Co layers seems thus to be sufficient to cause this magnetic collective behavior. Finally, the dependence of some of the magnetic properties on Co concentration is discussed, including also results from Co/Ag multilayers with thicker Co layers (up to 4 ML)., Financial support from the Project MAT2016-80394-R is acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Slow magnetic relaxation in well crystallized, monodispersed, octahedral and spherical magnetite nanoparticles

  • Navarro, Enrique
  • Luengo, Yurena
  • Veintemillas-Verdaguer, S.
  • Morales, María Del Puerto
  • Palomares, F. Javier
  • Urdiroz, Unai
  • Cebollada, Alfonso
  • González Fernández, Jesús María
[EN] Thermally activated relaxation over energy barriers concurrently related to local properties and interparticle interactions constitutes a major contribution to both the coercivity and the applied field frequency dependence of that quantity. We have measured the slow magnetic relaxation of magnetite nanoparticles (NPs), synthetized by using the oxidative precipitation technique, having spherical and octahedral shapes, monodispersed size distributions and similar transverse dimensions. From our relaxation data we evaluated the temperature dependencies of a) the irreversible demagnetization susceptibility, b) the fluctuation field (associated to the thermally induced demagnetization occurring during the measuring time range) and c) the activation volume (corresponding to the demagnetization produced by the fluctuation field). We conclude that i) the irreversible susceptibility peaks in both samples at ca. 135 K (Verwey transition temperature) and ii) the monotonically increasing temperature variation of the activation volume shows the same values in both samples for temperatures below ca. 135 K and at 290 K reaches values corresponding to 10 and 30 times the average particle volume of the spherical and octahedral NPs, respectively. Those large increases of the activation volume are compatible with a transition from local to collective of the thermally activated processes., The authors gratefully acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness and Spanish Research Agency under grants no. MAT2016-80394-R and MAT2017-88148-R (FEDER EU). FC and JMG would like to dedicate this work to the memory of Dr. D. Givord
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the visible light photoactivity of un-doped defective TiO2 anatase nanoparticles through a simple two-step solvothermal process

  • Calatayud, David G.
  • Flores, Raquel M.
  • Castellanos-Aliaga, Ana
  • Peiteado, Marco
  • Palomares, F. Javier
  • Caballero Cuesta, Amador
  • Jardiel, Teresa
[EN] Anatase TiO2 has become a material of great interest for photocatalytic production of hydrogen, environmental purification and solar energy conversion. Among the key parameters boosting the photocatalytic efficiency of the anatase nanoparticles, an increased light absorption to expand its optical response to the visible region, together with an improved charge separation of the photo- generated electrons and holes, can be enumerated. In this work, yellow-coloured, single-phase anatase nanoparticles have been obtained using a simple two-step solvothermal routine which requires no external addition of dopants, nor the use of a harassing/aggressive synthesis atmosphere. The obtained powders display a lowered bandgap (<3.0 eV) and significantly reduce the recombination processes, eventually leading to an improved photocatalytic performance under visible light, as exemplified by an enhanced degradation of phenol. This exceptional response is linked to the presence of intrinsic defects in the yellowish particles and, hence, the specific conditions of the proposed methodology become crucial to produce a propitious TiO2-defective nanomaterial capable of photo-degrade the phenol molecule, in contrast with the lack of photocatalytic activity currently exhibited by commercial photocatalysts under visible light., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through MAT2014-59210-JIN, MAT2016-80182-R, MAT2016-80394-R and CSIC 201760E012 projects. Dr T Jardiel acknowledges the European Science Foundation (ESF) and the Ramon y Cajal Program of MICINN for the financial support. Dr D G Calatayud also acknowledges the Fundación General CSIC (ComFuturo Program) for the financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Radio- and nano-chemistry of aqueous Ga(III) ions anchored onto graphene oxide-modified complexes

  • Sarpaki, S.
  • Cortezon-Tamarit, Fernando
  • de-Aguiar, S. R. M. M.
  • Exner, R. M.
  • Divall, D.
  • Arrowsmith, Rory L.
  • Ge, Haobo
  • Palomares, F. Javier
  • Carroll, Laurence
  • Calatayud, David G.
  • Paisey, S. J.
  • Aboagye, Eric O.
  • Pascu, Sofia I.
[EN] The gallium-68 radiolabelling of new functional graphene oxide composites is reported herein along with kinetic stability investigations of the radio-nanohybrids under different environments and insights into their surface characteristics by SEM and XPS. The present work highlights the potential of graphene oxides as nanocarriers for small molecules such as bis (thiosemicarbazonato) complexes to act as multifunctional platforms for rapid and effective radioimaging agent incorporation., The S. I. P. group thanks the Centre for Doctoral Training in Sustainable Chemical Technologies (EP/L016354/1). SIP also acknowledges the EU funding through the ERC for the Consolidator Grant O2SENSE (617107, 2014–2020). The authors thank EPSRC National Service for Mass Spectrometry at Swansea and for data collection. We thank Professor Stan Botchway for training in confocal fluorescence microscopy and Professor Jon Dilworth for helpful discussions in the radiochemistry of bis (thiosemicarbazones). The EOA group acknowledges support from Imperial College NIHR Biomedical Research Centre, Cancer Research UK (C2536/A16584) and the UK Medical Research Council (MR/J007986/1). D. G. C. also acknowledges the Fundación General CSIC (ComFuturo Program) for the financial support and F. J. P. the Spanish Ministry of Economy and Competitiveness (MINECO) (MAT2016-80394-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superparamagnetic nanosorbent for water purification: Assessment of the adsorptive removal of lead and methyl orange from aqueous solutions

  • Gallo-Cordova, Álvaro
  • Lemus, J.
  • Palomares, F. Javier
  • Morales, María Del Puerto
  • Mazarío, Eva
[EN] The present study describes the preparation of 50.3 nm superparamagnetic nanosorbents with high surface area for the adsorptive removal of lead and methyl orange from water. This material is based on the surface modification of iron oxide superparamagnetic nanoparticles with a double-shell coating of mesoporous silica whose porosity was increased up to 570 m/g by the addition of a porogenic material and its calcination. The adsorptive performance of the nanosorbent was evaluated as a function of several parameters (e.g. solution pH, pollutant initial concentration, and contact time), concluding that pHs around 5 are needed to avoid precipitation of Pb as Pb(OH) and the equilibrium adsorption capacity is reached after 2 h in all cases. The experimental data on the adsorption capacity of lead and methyl orange onto the nanosorbent were fit to a pseudo-second order kinetic model and Langmuir isotherm model. The maximum adsorption capacity value increases from 35 up to 50 mg/g for lead removal with increasing nanosorbent surface area. Contrary, for methyl orange the maximum adsorption goes up to 240 mg/g, indicating a larger nanosorbent surface affinity for the organic matter that is able to diffuse through the silica pores as probed by the intraparticle diffusion model. In addition, we found an good reusability (100% recovering after 4 sorption/desorption cycles for methyl orange removal), which makes of this magnetic nanosorbent suitable for remediation technologies., This research was funded by the Spanish Ministry of Economy and Competitiveness under grants MAT2017-88148-R, PIE-201760E007, MAT2016-80394-R, PGC2018-095642-B-I00 and Juan de la Cierva Formación FJCI-2015-23702
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly ordered silicide ripple patterns induced by medium-energy ion irradiation

  • Redondo-Cubero, Andrés
  • Palomares, F. Javier
  • Hübner, René
  • Gago, Raúl
  • Vázquez Burgos, Luis
[EN] We study the nanopatterning of silicon surfaces under near-normal 40-keV Ar+ sputtering with simultaneous Fe oblique codeposition. The ion-beam incidence was kept at 15°, for which no pattern is produced in the absence of metal incorporation. Morphological and compositional analyses were performed by atomic force microscopy, in its morphological and electrical modes, Rutherford backscattering spectrometry, X-ray photoelectron spectroscopy, scanning Auger, as well as transmission and scanning electron microscopy. Initially, nanodot structures randomly emerge, which, with increasing ion fluence, become progressively aligned along the perpendicular direction to the Fe flux. With increasing fluence, they coalesce, leading to a ripple pattern. The pattern dynamics and characteristics are faster and enhanced, respectively, as the distance to the metal source decreases (i.e., as the metal content increases). For the highest metal flux, the ripples can become rather large (up to 18 μm) and straighter, with few defects, and a pattern wavelength close to 500 nm, while keeping the surface roughness close to 15 nm. Furthermore, for a fixed ion fluence, the pattern order is improved for higher metal flux. In contrast, the pattern order enhancement rate with ion fluence does not depend on the metal flux. Our experimental observations agree with the predictions and assumptions of the model by Bradley [R. M. Bradley, Phys. Rev. B 87, 205408 (2013)10.1103/PhysRevB.87.205408] Several compositional and morphological studies reveal that the ripple pattern is also a compositional one, in which the ripple peaks have a higher iron silicide content, in agreement with the model. Likewise, the ripple structures develop along the perpendicular direction to the Fe flux, and the pattern wavelength increases as the metal flux decreases with a behavior qualitatively consistent with the model predictions., This research is supported by Spanish MINECO (Grants No. MAT2016-80394-R and No. MAT2017-85089-C2-1R) and the TRANSNANOAVANSENS program (Grant No. S2018/NMT-4349) from the Comunidad de Madrid. A.R.C. acknowledges Ramón y Cajal program (under Contract No. RYC-2015-18047). F.J.P. is thankful for financial support by A.E. Consejo Superior de Investigaciones Científicas (under Grant No. CSIC-2019AEP150). The use of HZDR Ion Beam Center TEM facilities is gratefully acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Silicon-Based Photonic Architectures from Hierarchically Porous Carbon Opals

  • Gil-Herrera, Luz Karime
  • Gallego-Gómez, Francisco
  • Torres-Pardo, Almudena
  • González-Calbet, José M.
  • Palomares, F. Javier
  • Blanco Montes, Álvaro
  • Juárez, Beatriz H.
  • López, Cefe
[EN] Silicon-based materials are needed in cutting-edge technological fields, for which hierarchical porosity and photonic properties help improve performance. In this work, the versatility of several fabrication routes that combine silicon infiltration by chemical vapor deposition (CVD), reactive ion etching (RIE), and carbon calcination, which produce a palette of novel silicon-based material architectures, is demonstrated. Design strategies are discussed and the main features of the processing steps are addressed to provide a variety of new silicon-based materials with high morphological versatility and photonic quality. Three-dimensional hollow carbon opals (HCO) permit control of the porosity of subsequent architectures through the initial silicon infiltration, while open or closed surfaces are achieved primarily as a function of RIE conditions. The composition of derived structures depends on the sequence in which the processes are applied. As a result, pure Si and hybrid C–Si inverse structures can be produced with open or closed spheres in the top layer and with an optional passivation layer. Remarkably, by properly choosing the Si infiltration parameters and the calcination/RIE procedure, final structures are achieved with double-shell spheres., This work was partially funded by the Spanish MCIU CSIC13-4E-1794, MAT2014-58731-JIN, MAT2016-80394-R, MAT2017-85617-R and RTI2018-093921-B-C41 and the excellence programs MDM-2014-0377 and SEV- 2016-0686. The authors acknowledge the service from the MiNa Laboratory at IMN, and funding from Comunidad de Madrid project S2018/NMT-4291 (TEC2SPACE).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Critical magnetic behavior in [Ag8/Co0.5]x64, [Ag8/Co1]x32 and [Ag16/Co1]x32 epitaxial multilayers

  • Navarro, Enrique
  • Alonso, María
  • Ruiz, Ana
  • Magén, César
  • Urdiroz, Unai
  • Cebollada, F.
  • Balcells, Lluis
  • Martínez Perea, Benjamín
  • González Fernández, Jesús María
  • Palomares, F. Javier
We investigate the low temperature magnetic behavior of three epitaxial Co/Ag multilayers, grown onto MgO (001) substrates, with a nominal content per period of either half a monolayer or one monolayer of Co, and either 8 or 16 Ag monolayers. The samples were studied by Xray reflectivity and diffraction, transmission electron microscopy, magnetometry and ac susceptometry. The results indicated a well defined stacking sequence in the growth direction, the number of periods and of Ag monolayers per period being coincident with the nominal values for each sample. The Co layers were found to be discontinuous and corresponded to a quasi-monodisperse in-plane distribution of Co nanoparticles embedded in a Ag(001) matrix. The zero-field cooled and field cooled temperature variations of the low field magnetization indicated the presence of irreversibilities at temperatures below 20 K. The ac field frequency (f) and temperature (T) dependencies of the real part of the susceptibility (χ′) corresponded to a Vogel–Fulcher behavior in the three samples, and indicated a frequency shift parameter (Γ) of the order of 4 x 10-2. For each sample, the experimental data corresponding to the variations of the imaginary part of the ac susceptibility (χ′′) with f and T were found to collapse into a single curve according to the dynamic scaling law. Taken together, these results allow us to conclude that the three multilayers experience a phase transition of the paramagnetic to superspin glass type, driven by the dipolar interactions betweenthe Co nanoparticles. Regarding the influence of the multilayer features, we found a clear dependence of the order parameter of the transition on the nominal number of Co monolayers per period., This work has been developed with funds corresponding to project MAT2016-80394-R financed by the Spanish Research Agency (AEI). We also acknowledge the Spanish Ministerio de Ciencia e Innovación and Consejo Superior de Investigaciones Científicas for financial support and for provision of synchrotron radiation at beamline BM25-SpLine (ESRF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of the interfaces in the crystallization and hysteresis mechanisms of amorphous Fe-B thin films

  • Urdiroz, Unai
  • Palomares, F. Javier
  • Mayoral, Álvaro
  • Soldatov, I. V.
  • Schäfer, R.
  • González Fernández, Jesús María
  • Sánchez-Agudo, Marta
  • Navarro, Enrique
  • Ruiz, Ana
  • Alonso, María
  • Vázquez Burgos, Luis
  • Cebollada, F.
In this work we study the crystallization processes of two sets of amorphous Fe80B20 films fabricated by Pulsed Laser Ablation Deposition on substrates with different nature, Corning glass® and MgO(001). We analyze their magnetic hysteresis mechanisms by means of magneto-optic techniques and Transmission Electron Microscopy. The as-deposited amorphous films present a highly homogeneous uniaxial magnetic anisotropy with the easy axis orientation dependent on the type of substrate and much weaker than that of bulk alloys with similar composition. The onset of crystallization for the films deposited on glass and MgO appears, respectively, at temperatures 150 °C and 250 °C below that of their bulk counterparts. We study the role of the substrate in the crystallization mechanism and the resulting nanostructure of the magnetic films. While the crystallization of the MgO-deposited films proceeds in a broad front growing from the substrate to the surface, that of the glass-deposited films takes place through the nucleation and growth of isolated crystallites. We analyze the evolution of the coercivity during the crystallization of the films. It follows a similar trend for both types, remaining in values close to those of the amorphous precursors until it rises steeply at a given annealing temperature. The threshold of the steep coercivity increase of the glass-deposited films is shifted to lower temperatures with respect to the MgO ones, in spite of the higher crystallization onset temperature of the former. The coercivity mechanisms have been analyzed, correlated to the films interfacial characteristics and compared to those of bulk alloys., We thank the financial support by the Spanish Research Agency (AEI), project MAT2016-80394-R, and Consejo Superior de Investigaciones Científicas (CSIC), Ref. 2019AEP150. U.U. acknowledges FPI grant BES-2014-070387. The microscopy works have been conducted in the “Laboratorio de Microscopias Avanzadas (LMA)” at Instituto de Nanociencia de Aragon (INA) - Universidad de Zaragoza. Authors acknowledge the LMA-INA for offering access to their instruments and expertise. A.M. acknowledges the Spanish Ministry of Science through the Ramon y Cajal program (RYC2018-024561-I). I.S. is grateful to Deutsche Forschungsgemeinschaft for support through project SO 1623/2-1., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of the metal supply pathway on silicon patterning by oblique ion beam sputtering

  • Redondo-Cubero, A.
  • Palomares, F. Javier
  • Lorenz, K.
  • Rubio-Zuazo, J.
  • Hübner, R.
  • Mompean, Federico J.
  • García-Hernández, Mar
  • Castro, Germán R.
  • Vázquez Burgos, Luis
The dynamics of the pattern induced on a silicon surface by oblique incidence of a 40 keV Fe ion beam is studied. The results are compared with those obtained for two reference systems, namely a noble gas ion beam either without or with Fe co-deposition. The techniques employed include Atomic Force Microscopy, Rutherford Backscattering Spectrometry, Transmission Electron Microscopy, X-ray Photoelectron and hard X-ray photoelectron spectroscopies, as well as Superconducting Quantum Interference Device measurements. The Fe-induced pattern differs from those of both reference systems since a pattern displaying short hexagonal ordering develops, although it shares some features with them. In both Fe systems a chemical pattern, with iron silicide-rich and -poor regions, is formed upon prolonged irradiation. The metal pathway has a marked influence on the patterns’ morphological properties and on the spatial correlation between the chemical and morphological patterns. It also determines the iron silicide stoichiometry and the surface pattern magnetic properties that are better for the Fe-implanted system. These results show that in ion-beam-induced silicon surface patterning with reactive metals, the metal supply pathway is critical to determine not only the morphological pattern properties, but also the chemical and magnetic ones. © 2021, This research is supported by Spanish MINECO (Grant No. MAT2016-80394-R and No. PID2020-113142RB-C21) and the TRANSNANOAVANSENS program (Grant No.S2018/NMT-4349) from the Comunidad de Madrid. A.R.C. acknowledges Ram´on y Cajal program (under Contract No. RYC-2015-18047). F.J.P. is thankful for financial support by A.E. Consejo Superior de Investigaciones Científicas (under Grant No. CSIC-2019AEP150). The use of the HZDR Ion Beam Center TEM facilities is gratefully acknowledged. We acknowledge the Spanish Ministerio de Ciencia e Innovaci´on and Consejo Superior de Investigaciones Científicas for financial support -PIE 201060E013 and PIE 2021 60 E 030- and for provision of synchrotron radiation facilities. We want to thank the operators of the SPLINE-BM25b beamline, and ESRF for the allocated beamtime (MA-2482, 25-02-849).We are grateful to M. Missbach for TEM specimen preparation as well as R. Cuerno, R. Gago, and E. García-Michel for useful discussions., Supplementary data to this article can be found online at https://doi. org/10.1016/j.apsusc.2021.152267, Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tuning the size, composition and structure of Au and Co50Au50 Nanoparticles by High-Power Impulse Magnetron Sputtering in gas-phase Synthesis

  • Mayoral, A.
  • Martinez, L.
  • García-Martín, J. M.
  • Fernández-Martínez, I.
  • García-Hernández, M.
  • Galiana, B.
  • Ballesteros, C.
  • Huttel, Y.
Gas-phase synthesis of nanoparticles with different structural and chemical distribution is reported using a circular magnetron sputtering in an ion cluster source by applying high-power impulses. The influence of the pulse characteristics on the final deposit was evaluated on Au nanoparticles. The results have been compared with the more common direct current approach. In addition, it is shown for the first time that high-power impulses in magnetron based gas aggregation sources allows the growth of binary nanoparticles, CoAu in this case, with a variety of crystalline and chemical arrangements which are analyzed at the atomic level.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Low temperature superspin glass behavior in a Co/Ag multilayer

  • Navarro, E.
  • Alonso, M.
  • Ruiz, A.
  • Magen, C.
  • Urdiroz, U.
  • Cebollada, F.
  • Balcells, L.
  • Martínez, B.
  • Palomares, F.J.
  • González, J.M.
We report on the low temperature magnetic behavior of an epitaxially grown multilayer formed by 32 repetitions of a nominal period corresponding to 1 monolayer (ML) Co and 16 ML Ag. The study of the magnetic properties was based on the measurement of the temperature dependencies of the dc magnetization upon field cooling (FC) and zero field cooling (ZFC) and of the ac field real and imaginary parts of the susceptibility. From our results we conclude about the occurrence of i) a well-defined bilayers stacking sequence matching the nominal one, ii) a discontinuous growth in the Co layers resulting on close-To-monodisperse, spherical Co nanoparticles having an average diameter of 1.6 nm, iii) a frequency dependent peak in the temperature dependence of the real part of the ac susceptibility exhibiting a per decade relative temperature variation of 4.5 x 10-2, iv) an applied dc field, Hdc, variation of the temperature at which the irreversibility is detected in the FC/ZFC curves corresponding to the Almeida-Thouless prediction, and v) a critical behavior characterized by a glass-Transition temperature slightly below the peak temperatures observed at low frequency in the temperature dependence of the ac susceptibility and a dynamic scaling exponent in the range of the values usually obtained for spin glass systems. From our results we conclude that i) our sample experiences a superspin-glass/paramagnetic phase transition, ii) the interactions mediating the spin glass freezing process are the dipolar ones taking place among the Co particles (creating fields at the average interparticle distance of the order of 8 x 105 A/m) which provide competitiveness that combined with the reduced amount of disorder built-in the Co layers results on frustration.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dynamic magnetic properties of amorphous Fe80B20 thin films and their relation to interfaces

  • Urdiroz, U.
  • Teixeira, B. M. S.
  • Palomares, F. J.
  • Gonzalez, J. M.
  • Sobolev, N. A.
  • Cebollada, F.
  • Mayoral, A.
We present a ferromagnetic resonance study of the dynamic properties of a set of amorphous Fe-B films deposited on Corning Glass® and MgO (001) substrates, either with or without capping. We show that the in plane anisotropy of the MgO grown films contains both uniaxial and biaxial components whereas it is just uniaxial for those grown on glass. The angular dependence of the linewidth strongly differs in terms of symmetry and magnitude depending on the substrate and capping. We discuss the role of the interfaces on the magnetization damping and the generation of the anisotropy. We obtained values of the intrinsic damping parameters comparable to the lowest ones reported for amorphous films of similar compositions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Critical magnetic behavior in [Ag8/Co0.5]x64, [Ag8/Co1]x32 and [Ag16/Co1]x32 epitaxial multilayers

  • Navarro, E.
  • Alonso, M.
  • Ruiz, A.
  • Magen, C.
  • Urdiroz, U.
  • Cebollada, F.
  • Balcells, L.
  • Martínez, B.
  • González, J.M.
  • Palomares, F.J.
We investigate the low temperature magnetic behavior of three epitaxial Co/Ag multilayers, grown onto MgO (001) substrates, with a nominal content per period of either half a monolayer or one monolayer of Co, and either 8 or 16 Ag monolayers. The samples were studied by X-ray reflectivity and diffraction, transmission electron microscopy, magnetometry and ac susceptometry. The results indicated a well defined stacking sequence in the growth direction, the number of periods and of Ag monolayers per period being coincident with the nominal values for each sample. The Co layers were found to be discontinuous and corresponded to a quasi-monodisperse in-plane distribution of Co nanoparticles embedded in a Ag(001) matrix. The zero-field cooled and field cooled temperature variations of the low field magnetization indicated the presence of irreversibilities at temperatures below 20 K. The ac field frequency (f) and temperature (T) dependencies of the real part of the susceptibility (¿') corresponded to a Vogel-Fulcher behavior in the three samples, and indicated a frequency shift parameter (G) of the order of 4 x 10-2. For each sample, the experimental data corresponding to the variations of the imaginary part of the ac susceptibility (¿¿) with f and T were found to collapse into a single curve according to the dynamic scaling law. Taken together, these results allow us to conclude that the three multilayers experience a phase transition of the paramagnetic to superspin glass type, driven by the dipolar interactions between the Co nanoparticles. Regarding the influence of the multilayer features, we found a clear dependence of the order parameter of the transition on the nominal number of Co monolayers per period.