Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 8
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Two-step doping approach releasing thepiezoelectric response of BiFeO3 bulk ceramicsco-doped with titanium and samarium, Desarrollo de una estrategia de dopado en dos etapas para liberar larespuesta piezoeléctrica de cerámicas en volumen de BiFeO3co-dopadocon titanio y samario

  • Gumiel, Carlos
  • Bernardo, M. S.
  • Villanueva, Pablo G.
  • Calatayud, David G.
  • Peiteado, Marco
  • Jardiel, Teresa
[EN] The conventional solid state processing of bulk Ti,Sm co-doped BiFeO ceramics typically produces a complex micro-nanostructure which exhibits an effective decrease of the leakage conductivity. This same nanostructured configuration however confines the mobility of the ferroelectric domains and in this way the potential piezoelectric response of the formulated composition remains restrained. Hereby, a two-step doping strategy based on a simple surface modification approach is proposed which eventually allows for suitably engineering the microstructural development of the material, leading to a coarsened configuration where the conductivity is kept in low levels while the piezoelectric response is satisfactorily released for practical purposes., [ES] El procesamiento convencional en estado sólido de materiales cerámicos en volumen deBiFeO3co-dopado con Ti y Sm, típicamente produce una compleja micro-nanoestructuraque permite una reducción efectiva de la conductividad eléctrica del material (corrientesde fuga). Sin embargo, esta misma configuración nano-estructurada también reduce lamovilidad de los dominios ferroeléctricos y por ello, la potencial respuesta piezoeléctricade la composición formulada permanece confinada. En este trabajo se propone el empleo de una estrategia de dopado en dos etapas, basada en una sencilla aproximación de modi-ficación superficial, con la cual es posible dise ̃nar y controlar adecuadamente el desarrollomicroestructural del sistema, dando lugar a un engrosamiento de la microestructura quepermite mantener la conductividad del material en bajos niveles al tiempo que libera sat-isfactoriamente su respuesta piezoeléctrica., This work was supported by the Spanish Ministry of Economyand Competitiveness (MINECO) through MAT2016-80182-Rand MAT2014-59210-JIN projects. Dr. T. Jardiel acknowledgesthe European Science Foundation (ESF) and the Ramon y Cajal Program of MINECO for the financial support. Dr. D.G.Calatayud also acknowledges the Fundación General CSIC(ComFuturo Program) for the financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thin film composites in the BiFeO3–Bi4Ti3O12 system obtained by an aqueous solution-gel deposition methodology, Obtención de láminas delgadas del sistema compuesto BiFeO3-Bi4Ti3O12 mediante procesamiento disolución-gel en medio acuoso

  • Gumiel, Carlos
  • Vranken, Thomas
  • Bernardo, M. S.
  • Jardiel, Teresa
  • Hardy, An
  • Van Bael, Marlies K.
  • Peiteado, Marco
[EN] Thin film multiferroic composites, with a high quantity of interfaces between the different materials, represent a more feasible alternative to single phase systems in which the multifunctional response is usually hampered due to intrinsic physical constraints. Nowadays some of these composites can be produced by applying deposition techniques such as PLD, CVD, MBE or the like, which allow a high degree of crystallographic control. However, despite their effectiveness, all these techniques also involve a high consumption of energy in terms of temperature and/or vacuum. Within this frame, the present contribution proposes a sustainable chemical solution deposition process to prepare thin films of the multiferroic BiFeO–BiTiO composite system. More specifically an aqueous solution-gel plus spin-coating methodology is employed which also avoids the organic solvents typically used in a conventional sol–gel method, so further keeping an eye on the environmentally friendly conditions. Attempts are conducted that demonstrate how by systematically controlling the processing parameters it is possible to obtain thin film composites with a promising 3-3 type connectivity at temperatures as low as 600 °C., [ES] Los materiales compuestos (composites) multiferroicos en forma de lámina delgada y conun gran número de intercaras entre los distintos componentes, representan una alternativa más práctica y viable frente a los sistemas monofásicos, en los cuales la respuestamultiferroica se encuentra típicamente impedida debido a restricciones físicas de carácter intrínseco. Actualmente algunos de estos composites son obtenidos mediante diversas técnicas de deposición tales como PLD, CVD, MBE o similares, las cuales permiten un alto grado de control a nivel cristalográfico. No obstante, a pesar de su efectividad, todas estas técnicas también engloban un alto consumo de energía en términos de temperatura y/o vacío. En este contexto, el presente trabajo de investigación propone un método de deposición química en disolución para obtener láminas delgadas del sistema multiferroico compuesto BiFeO3-Bi4Ti3O12. En concreto se plantea la utilización de una metodología disolución-gel en medio acuoso seguida de deposición por spin coating, metodología con la que además se evita el empleo de los disolventes orgánicos típicamente utilizados en un método sol-gel convencional y que por tanto acentúa el carácter sostenible del proceso. Para ello se han llevado a cabo diferentes experimentos con los cuales se pone de manifiesto cómo llevando a cabo un control sistemático de las distintas variables del proceso, es posible obtener composites en forma de lámina delgada con una prometedora configuración 3-3 a temperaturas no superiores a 600 ◦C., This work was supported by the Spanish Ministry of Economy and Competitiveness, MINECO (Projects MAT2016-80182-Rand MAT2014-59210-JIN). This work was also conducted in theframe of “Grupo de Propiedades Ópticas, Eléctricas y Magnéticas y sus Aplicaciones”, (UPM), Unidad Asociada al Instituto de Cerámica y Vidrio (CSIC).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailoring the visible light photoactivity of un-doped defective TiO2 anatase nanoparticles through a simple two-step solvothermal process

  • Calatayud, David G.
  • Flores, Raquel M.
  • Castellanos-Aliaga, Ana
  • Peiteado, Marco
  • Palomares, F. Javier
  • Caballero Cuesta, Amador
  • Jardiel, Teresa
[EN] Anatase TiO2 has become a material of great interest for photocatalytic production of hydrogen, environmental purification and solar energy conversion. Among the key parameters boosting the photocatalytic efficiency of the anatase nanoparticles, an increased light absorption to expand its optical response to the visible region, together with an improved charge separation of the photo- generated electrons and holes, can be enumerated. In this work, yellow-coloured, single-phase anatase nanoparticles have been obtained using a simple two-step solvothermal routine which requires no external addition of dopants, nor the use of a harassing/aggressive synthesis atmosphere. The obtained powders display a lowered bandgap (<3.0 eV) and significantly reduce the recombination processes, eventually leading to an improved photocatalytic performance under visible light, as exemplified by an enhanced degradation of phenol. This exceptional response is linked to the presence of intrinsic defects in the yellowish particles and, hence, the specific conditions of the proposed methodology become crucial to produce a propitious TiO2-defective nanomaterial capable of photo-degrade the phenol molecule, in contrast with the lack of photocatalytic activity currently exhibited by commercial photocatalysts under visible light., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through MAT2014-59210-JIN, MAT2016-80182-R, MAT2016-80394-R and CSIC 201760E012 projects. Dr T Jardiel acknowledges the European Science Foundation (ESF) and the Ramon y Cajal Program of MICINN for the financial support. Dr D G Calatayud also acknowledges the Fundación General CSIC (ComFuturo Program) for the financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly photoactive TiO2 microspheres for photocatalytic production of hydrogen

  • Pulido Melián, E.
  • Nereida Suárez, M.
  • Jardiel, Teresa
  • Calatayud, David G.
  • Campo, Ángel Adolfo del
  • Doña Rodríguez, J. M.
  • Araña, J.
  • González Díaz, O.M.
[EN] In this study, the photocatalytic activity in hydrogen production of a TiO catalyst with hierarchical structure and microsphere morphology was tested. This catalyst was synthesised by hydrolysis and condensation processes from a Ti(OBut) precursor and calcined at 150 °C, 400 °C and 630 °C. Hydrogen production of the subsequent photocatalysts rose by two and three orders of magnitude after the incorporation of Au or Pt particles by photodeposition. The microspheres with and without metal modification were characterised by scanning electron microscopy-energy dispersive X-ray spectroscopy (SEM-EDX), X-ray diffraction (XRD), Raman, Brunauer–Emmett–Teller (BET) surface area, Fourier transform infrared spectroscopy (FTIR) and diffuse reflectance measurements. The highest production rates were obtained for the metal-modified photocatalysts calcined at 400 °C. Hydrogen production increased with Au loading, attaining a rate of 1118 μmol·h for the 1.5 wt% Au photocatalyst. However, the highest production rate in the case of Pt was attained with just 0.27 wt% and was almost twice as high as that obtained with Au, 2125 μmol·h. When compared with previous studies by our team under the same conditions, this high production rate, obtained with a very low Pt loading, was only exceeded by the reference Aeroxide P25 TiO catalyst with a Pt loading greater than 1.5 wt%., This work was supported by the Spanish Ministry of Science and Innovation through the project IPT-120000-2010-033(GESHTOS). We would also like to thank the Spanish Ministry of Science and Innovation for the UNLP10-3E-726 infra-structure, co-financed with ERDF funds. T. Jardiel alsoacknowledges the financial support of the MAT2014-59210-JIN project of MINECO. M. Nereida Suárez would also like to thankthe University of Las Palmas de Gran Canaria for its fundingthough the PhD Grant Program.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combination of structural and microstructural effects in the multiferroic response of Nd and Ti co-doped BiFeO3 bulk ceramics

  • Gumiel, Carlos
  • Jardiel, Teresa
  • Bernardo, M. S.
  • Villanueva, Pablo G.
  • Urdiroz, Unai
  • Cebollada, F.
  • Aragó, C.
  • Caballero Cuesta, Amador
  • Peiteado, Marco
[EN] Different dopant strategies are currently under investigation in order to overcome the many problems that limit the commercial viability of BiFeO-based ceramic devices. Neodymium substitution onto the A site of the perovskite lattice provokes significant changes in the crystal structure of the parent material which can derive in enhanced multiferroic properties, but the conductivity in the bulk system is still too high. Titanium doping on the other hand generates a distinctive micro-nanostructure in the consolidated ceramics which can largely increase the dc resistivity of the whole material. A combination of these two effects is here attempted in a co-doping approach which evidences that the microstructural effect caused upon Ti-doping, provoking a reduction of the leakage currents, eventually allows the co-doped material to capitalize on the unique piezoelectric and magnetic properties structurally triggered by the Nd-doping., This work has been conducted in the frame of MAT2016-80182-R and MAT2014-59210-JIN research projects.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electric current activated sintering (ECAS) of undoped and titanium-doped BiFeO3 bulk ceramics with homogeneous microstructure

  • Bernardo, M. S.
  • Jardiel, Teresa
  • Caballero Cuesta, Amador
  • Bram, M.
  • González Julián, Jesús
  • Peiteado, Marco
[EN] BiFeO ceramics have been consolidated applying an electric current activated/assisted sintering (ECAS) methodology under different electrical conditions. DC experiments produce a flash sintering regime by which the bulk cylindrical specimens densify in a few seconds; however, this goes together with a strong localization of the current flow within the material, leading to a dramatic lack of microstructural and compositional homogeneity. The situation changes under the alternate field; a more gradual FAST (Field Assisted Sintering) event is produced which allows the attainment of an exceptional microstructural homogeneity through the whole sintered compacts. Upon Ti-doping the overall diffusivity of the system is delayed but the AC conditions again yield a remarkable microstructural homogeneity in the consolidated material, this time even at the nanoscale level. Accordingly, bulk BiFeO ceramics with homogeneous micro-nanostructure can be successfully prepared by an ECAS methodology and at lower temperatures and much shorter times than by conventional solid-state sintering., This work was supported by the Spanish Ministry of Economy and Competitiveness in the frame of projects MAT2016-80182-R and MAT2014-59210-JIN. It was also supported by the JECS Trust under contract 2016118.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Ga-doped ZnO self-assembled nanostructures obtained by microwave-assisted hydrothermal synthesis: Effect on morphology and optical properties

  • Bernardo, M. S.
  • Villanueva, Pablo G.
  • Jardiel, Teresa
  • Calatayud, David G.
  • Peiteado, Marco
  • Caballero Cuesta, Amador
Highly homogeneous gallium doped ZnO assembled nanostructures comprised by thin hexagonal platelets showing a striking preferred orientation along the ab plane have been obtained by an ultra-fast and eco-friendly microwave-assisted hydrothermal synthesis method. Although the incorporation of gallium into the ZnO lattice is found to be relatively low, namely ≤1 mol.%, the gallium nitrate addition plays a key role in the size and morphology of the obtained ZnO nanostructures. The observed morphology is attributed to the selective adsorption of the gallium species on the basal planes of ZnO, which inhibits the growth along the ± [0001] direction. Additionally, the optical band-gap and the fluorescence emission are modified upon gallium addition. The observed changes in the optical properties are ascribed to both the decreased crystal size and to the gallium incorporation into the ZnO structure, which lead to the modification in the energy levels., This work has been conducted within the MAT2013-40722-R, MAT2014-59210-JIN and MAT2016-80182-R projects. This work was also conducted in the frame of “Grupo de Propiedades Ópticas, Eléctricas y Magnéticas y sus Aplicaciones”, (UPM), Unidad Asociada al Instituto de Cerámica y Vidrio (CSIC).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solid state diffusion and reactivity in the multiferroic BiFeO3–Bi4Ti3O12 composite system

  • Gumiel, Carlos
  • Bernardo, M. S.
  • Villanueva, Pablo G.
  • Jardiel, Teresa
  • Frutos, José de
  • Caballero Cuesta, Amador
  • Peiteado, Marco
[EN] In the search of multiferroic materials with enhanced magnetoelectric response, the BiFeO–BiTiO composite system has been proposed as a promising candidate. However, in order to ensure an effective coupling between the antiferromagnetic and the ferroelectric-order parameters, a high structural quality of the oxide heterostructure (well-matched interface) must be attained. This implies the absence of any inter-diffusion process across the interface during the consolidation of the composite assembly. In this contribution, we have analysed the different diffusion scenarios that could be established in this nominal BiFeO–BiTiO system as a function of the specific reactivity of the involved compounds. The obtained results clearly identify how and when that diffusion is produced, so now it can be controlled to ensure the maximum exploitation of the potential multiferroic properties of this candidate system., This work was supported by the Spanish Ministry of Economy and Competitiveness, MINECO [projects MAT2013-40722-R and MAT2014-59210-JIN] and the Spanish Council of Scientific Research, CSIC [project CSIC 201460E104]. Marco Peiteado also acknowledges the Ramon y Cajal grant for the financial support.