Pasar al contenido principal

PROCESAMIENTO SOSTENIBLE DE NANOARQUITECTURAS COMPLEJAS BASADAS EN OXIDOS

MAT2013-40722-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD POLITECNICA DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of blue faceted anatase nanoparticles through extensive fluorine lattice doping

  • Calatayud, David G.
  • Jardiel, Teresa
  • Peiteado, Marco
  • Illas, Francesc
  • Giamello, Elio
  • Palomares, F. Javier
  • Fernández Hevia, D.
  • Caballero Cuesta, Amador
An effective synthesis strategy for the extensive fluorination of the TiO2 anatase lattice has been developed which provides a highly stable blue-colored titania powder. The process also produces a convenient faceted morphology of the doped nanoparticles. Both theoretical and experimental data indicate an ordered atomic structure, in which an exceptionally high amount of fluorine ions substitute oxygen ions in the TiO2 lattice. The extra-electrons borne by fluorine are stabilized by lattice Ti cations via a mechanism of valence induction, eventually leading to a consequent high amount of reduced Ti3+ centers. Such structure, whose general formula can be expressed as Ti4+(1-x)Ti3+xO2–(2-x)F–x, confers an excellent stability to the as-synthesized nanoparticles (in spite of the excess electrons), explaining for example why the blue color is retained even upon storage in ambient atmosphere. But moreover, the high concentration of the relatively shallow Ti3+ generated states also form a sort of sub-band close to the bottom of the conduction band itself. The whole effect results in a tangible decrease (0.2 eV) of the anatase band gap which allows an inspiring upgrading of its UV photocatalytic activity. Our results also suggest that narrowing the band gap is insufficient for a substantial improvement in the visible light harvesting., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through the projects IPT-2011-1113-310000 (NANOBAC), MAT2013-40722-R (SCOBA), MAT2013-47878-C2-1-R and CTQ2012-30751 and by the Comunidad de Madrid through the project MULTIMAT-CHALLENGE P2013/MIT-2862. T.J. also acknowledges the European Science Foundation (ESF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analysis of the rhombohedral-tetragonal symmetries coexistence in lead-free 0.94(Bi0.5Na0.5)TiO3–0.06BaTiO3 ceramics from nanopowders

  • Gonzalez, A. M.
  • Pardo, Lorena
  • Montero-Cabrera, Maria Elena
  • Fuentes-Cobas, L. E.
Ceramics with perovskite-type structure and 0.94(BiNa)TiO-0.06BaTiO (BNBT) composition have been studied by conventional powder X-ray diffraction in Bragg-Brentano geometry. Ceramics were obtained from sol-gel autocombustion nanopowders and processed either by hot pressing and subsequent recrystallisation or pressureless sintering in two steps. These methods provided single-phase, sub-micron grain size (<700 nm), dense ceramics with good piezoelectric performance (96-94% of theoretical density and d = 143-124 pC N, respectively). For the considered ceramics, the splitting of the peaks of the cubic perovskitetype structure with 111 and 200 Miller indices has been repeatedly used as a symmetry identification criterion. In this work a simple, yet powerful, procedure to validate the consistency of the mentioned splitting interpretation is presented. Based on peaks fitting and well-known crystallographic expressions, the rhombohedral and tetragonal symmetries' coexistence is verified. The suggested procedure can be applied to the study of peak splitting in ceramics at Morphotropic Phase Boundaries in a general way. In a given series of BNBT ceramics, inconsistencies for interplanar distances, intensities' ratios and the evolution of these from notpoled to poled samples have been found. In poled ceramics, special care has been taken when carrying out this analysis, due to the anisotropic strains arising from ferroelectric (FE) domain orientation. Poling gives rise to a displacement of the peaks angular positions and modification of the intensity ratios. However, the interplanar distance changes associated with the angular deviations here observed are one order of magnitude higher than those expected from anisotropic strains. These results set up a doubt on the sufficiency of the [rhombohedral + tetragonal] model to characterise the considered ceramics. A model of a mesoscopic FE phase with rhombohedral symmetry, a mesoscopic and globally weakly polar phase, with cubic symmetry, and a nanosised phase, also cubic, is presented as a plausible alternative., Spanish projects CSIC #201060E069 and MAT2013-40722-R are acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

SPS driven lithium differential diffusion in NASICON-like structures, Difusión diferencial de Litio en estructuras tipo NASICON durante su consolidación mediante SPS

  • Perez-Estébanez, Marta
  • Peiteado, Marco
  • Caballero Cuesta, Amador
  • Palomares, F. Javier
  • Nygren, Mats
  • Isasi-Marín, Josefa
[EN] Samples of nominal composition LiFeTi(PO) with a NASICON-type crystal structure, can be sintered up to 95% of the theoretical density at only 600 °C using spark plasma sintering, SPS. The final pellets however show different colouration in their upper and lower faces, being the upper face white and the lower one pink. The analysis of both surfaces by XPS shows a higher concentration of lithium on the white upper face, as a consequence of the polar diffusion of ions from the positive to the negative rams during SPS. On the other hand the study by XRD and SEM shows the formation of an extra phase in the upper face with nominal composition LiOPO. A change in the cell parameters of the original NASICON structure is also observed, confirming the diffusion of lithium ions., [ES] Muestras de composición nominal Li1.3Fe0.3Ti1.7(PO4)3 y estructura tipo NASICON se han logrado consolidar mediante SPS (spark plasma sintering) a tan sólo 600 °C y alcanzando una densidad del 95% de la densidad teórica. No obstante, las pastillas obtenidas muestran una diferente coloración en sus caras, siendo la cara superior de colour blanco y la cara inferior de colour rosado. El análisis de ambas superficies mediante XPS evidencia una mayor concentración de litio en la cara superior blanquecina, como resultado de un proceso de difusión polar de iones entre los polos positivo y negativo durante el tratamiento por SPS. Por su parte el estudio mediante DRX y SEM de ambas caras indica la formación de una fase extra en dicha cara superior, con una composición nominal LiOPO4. Además se observa un cambio en los parámetros de red de la estructura NASICON original, confirmando dicha difusión de los iones litio., This research has been financed by the Spanish Ministry of Economy and Competitiveness (MINECO) in the frame of projects MAT2010-18432 and MAT2013-40722-R, as well as by the “Fundación Neurociencias y Envejecimiento” (Spain) through grants 4153592 and 4143942. M. Peiteado also acknowledges the Ramon y Cajal Program of MINECO for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Piezoelectric ceramics of the (1 - x)Bi0.50Na0.50TiO3-xBa0.90Ca0.10TiO3 lead-free solid solution: Chemical shift of the morphotropic phase boundary, a case study for x = 0.06

  • Vivar-Ocampo, Rodrigo
  • Pardo, Lorena
  • Ávila, David
  • Morán, Emilio
  • González, Amador M.
  • Bucio, Lauro
  • Villafuerte-Castrejón, María-Elena
Research and development of lead-free piezoelectric materials are still the hottest topics in the field of piezoelectricity. One of the most promising lead-free family of compounds to replace lead zirconate-titanate for actuators is that of BiNaTiO (BNT) based solid solutions. The pseudo-binary (1 - x)BiBiNaTiO-xBaCaTiO system has been proposed for high temperature capacitors and not yet fully explored as piezoelectric material. In this work, the solid solution with x = 0.06 and y = 0.10 was obtained by two different synthesis routes: solid state and Pechini, aiming at using reduced temperatures, both in synthesis (<800 °C) and sintering ( < 1150 °C), while maintaining appropriated piezoelectric performance. Crystal structure, ceramic grain size, and morphology depend on the synthesis route and were analyzed by X-ray diffraction, together with scanning and transmission electron microscopy. The effects of processing and ceramic microstructure on the structural, dielectric, ferroelectric, and piezoelectric properties were discussed in terms of a shift of the Morphotropic Phase Boundary, chemically induced by the synthesis route., R. Vivar-Ocampo would like to thank CONACyT-México for providing a PhD scholarship. M.E. Villafuerte-Castrejón also kindly acknowledges the financial support of PAPIIT-UNAM by DGAPA under project IN 102715. E. Morán and D. Ávila thank Ministerio de Economía y Competitividad and Comunidad de Madrid for funding the projects MAT2013-46452-C4-4-R and S2013/MIT-2753. A. M. González thanks to Ministerio de Economia y Competitividad for funding the project MAT2013-40722-R. Villafuerte-Castrejón and the Short Stay of R. Vivar-Ocampo at ICMM-CSIC (Madrid, Spain) with the support of PASPA-UNAM and CONACYT.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metastable nature of donor-doped BiFeO3 obtained by mechanochemical synthesis

  • Bernardo, M. S.
  • Jardiel, Teresa
  • Peiteado, Marco
  • Caballero Cuesta, Amador
[EN] Nb or W donor-doped powders were synthesized by applying a mechanochemical synthesis route, in an attempt to improve the multiferroic properties of BiFeO3 based materials. The as-synthesized samples evidence a highly efficient incorporation of Nb or W into the BiFeO perovskite lattice, together with a low presence of secondary phases. The relatively high purity of the mechanosynthetized products is even more appealing when it is compared with the multiphase scenario obtained by a mixed oxides route for these compositions. This confirms this technique as a good alternative to conventional solid state processing; however the thermal evolution of the as-prepared powders also reveals a metastable nature of the synthesized phases which upon an external energy input leads to an unwelcome multiphase system., This work was conducted in the frame of project MAT2013-40722-R. M. S. Bernardo acknowledges the Spanish Ministry of Education, Culture and Sport for the financial support (FPU scholarship program). M. Peiteado also acknowledges the Ramon y Cajal Program of MINECO for the financial funding.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Titanium doping of BiFeO3 ceramics and identification of minor phases by Raman spectroscopy

  • Bernardo, M. S.
  • Calatayud, David G.
  • Jardiel, Teresa
  • Makovec, D.
  • Peiteado, Marco
  • Caballero Cuesta, Amador
[EN] Titanium substitution can improve the multiferroic properties of bismuth ferrite materials, albeit the structural changes that this dopant produces in the perovskite structure of BiFeO are still not well understood. Due to its high sensitivity, Raman spectroscopy can be a useful tool for trailing the dopant incorporation. In this work, we study the Raman spectra of undoped and Ti-doped BiFeO ceramics that also contain small amounts of secondary phases – as it is usual for materials of this system. The micro-Raman study together with a rigorous derivative analysis of the experimental Raman spectra recorded at low temperature (73 K) enables, for the first time, the identification of the Raman bands associated with the BiFeO phase together with those belonging to the minor secondary phases. The comparison between the Raman spectra of the undoped and the Ti-doped materials indicates that some of the titanium added to the composition interacts with the secondary phases while only a partial amount of this dopant actually incorporates into the BiFeO phase. Copyright © 2017 John Wiley & Sons, Ltd., This work has been conducted within the CSIC 201460E104 and MAT2013-40722-R projects. M.P. also acknowledges the Ramón yCajal Program of MINECO for the financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Ga-doped ZnO self-assembled nanostructures obtained by microwave-assisted hydrothermal synthesis: Effect on morphology and optical properties

  • Bernardo, M. S.
  • Villanueva, Pablo G.
  • Jardiel, Teresa
  • Calatayud, David G.
  • Peiteado, Marco
  • Caballero Cuesta, Amador
Highly homogeneous gallium doped ZnO assembled nanostructures comprised by thin hexagonal platelets showing a striking preferred orientation along the ab plane have been obtained by an ultra-fast and eco-friendly microwave-assisted hydrothermal synthesis method. Although the incorporation of gallium into the ZnO lattice is found to be relatively low, namely ≤1 mol.%, the gallium nitrate addition plays a key role in the size and morphology of the obtained ZnO nanostructures. The observed morphology is attributed to the selective adsorption of the gallium species on the basal planes of ZnO, which inhibits the growth along the ± [0001] direction. Additionally, the optical band-gap and the fluorescence emission are modified upon gallium addition. The observed changes in the optical properties are ascribed to both the decreased crystal size and to the gallium incorporation into the ZnO structure, which lead to the modification in the energy levels., This work has been conducted within the MAT2013-40722-R, MAT2014-59210-JIN and MAT2016-80182-R projects. This work was also conducted in the frame of “Grupo de Propiedades Ópticas, Eléctricas y Magnéticas y sus Aplicaciones”, (UPM), Unidad Asociada al Instituto de Cerámica y Vidrio (CSIC).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Solid state diffusion and reactivity in the multiferroic BiFeO3–Bi4Ti3O12 composite system

  • Gumiel, Carlos
  • Bernardo, M. S.
  • Villanueva, Pablo G.
  • Jardiel, Teresa
  • Frutos, José de
  • Caballero Cuesta, Amador
  • Peiteado, Marco
[EN] In the search of multiferroic materials with enhanced magnetoelectric response, the BiFeO–BiTiO composite system has been proposed as a promising candidate. However, in order to ensure an effective coupling between the antiferromagnetic and the ferroelectric-order parameters, a high structural quality of the oxide heterostructure (well-matched interface) must be attained. This implies the absence of any inter-diffusion process across the interface during the consolidation of the composite assembly. In this contribution, we have analysed the different diffusion scenarios that could be established in this nominal BiFeO–BiTiO system as a function of the specific reactivity of the involved compounds. The obtained results clearly identify how and when that diffusion is produced, so now it can be controlled to ensure the maximum exploitation of the potential multiferroic properties of this candidate system., This work was supported by the Spanish Ministry of Economy and Competitiveness, MINECO [projects MAT2013-40722-R and MAT2014-59210-JIN] and the Spanish Council of Scientific Research, CSIC [project CSIC 201460E104]. Marco Peiteado also acknowledges the Ramon y Cajal grant for the financial support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thin film processing of multiferroic BiFeO3: From sophistication to simplicity. A review, Procesamiento de láminas delgadas multiferroicas basadas en BiFeO3: de la sofisticación a la simplicidad. Una revisión

  • Gumiel, Carlos
  • Calatayud, David G.
[EN] The obtaining of BiFeO3 in the form of a thin film represents a critical issue for its application in electronic devices since this is the required geometry for the integration of this material in microelectronic circuits. There are several techniques for this purpose, from those that use a gas or plasma phase to transport the precursors to the substrate, which would be included within the PVD or CVD techniques (for its acronym Physical Vapor Deposition and Chemical Vapor Deposition) to those that use a phase liquid for this transport, which would be included under the CSD (Chemical Vapor Deposition) techniques. However, among the large number of published papers, there is much controversy about which of them would be most suitable. It has been clearly demonstrated that all of them have the sufficient capacity to produce uniform and homogeneous thin films in thickness throughout the entire substrate, and although in many articles pure BiFeO3 films have been obtained with an exploitable functional response, others have reported the typical drawbacks that usually entails the obtaining this material: appearance of secondary phases, high leakages or a poor functional response. Nevertheless, there is a common aspect in the specialized literature that seems to be in agreement: the first group of techniques require very sophisticated equipment that involves high energy consumption in terms of temperature and pressure (vaccum), while the techniques that are based on solutions are characterized by their higher simplicity. In this context, the purpose of the present review is to summarize the main aspects of each technique in the obtaining of BiFeO3 thin films, from those that are more sophisticated to the simplest and environmentally benevolent ones, in order to provide an easier understanding of them., [ES] La obtención de BiFeO3 en forma de lámina delgada representa una cuestión crítica para su aplicación en dispositivos electrónicos ya que es la geometría requerida para la integración de este material en circuitos microelectrónicos. Existen varias técnicas para este fin, desde las que utilizan una fase gaseosa o plasmática para transportar los precursores al sustrato, que se englobarían dentro de las técnicas PVD o CVD (por sus siglas en inglés de Physical Vapor Deposition y Chemical Vapor Deposition) hasta las que utilizan una fase líquida para este transporte, que se englobarían dentro de las técnicas CSD (Chemical Vapor Deposition). Sin embargo, entre el gran número de trabajos publicados, hay mucha controversia sobre cuál de ellas sería la más adecuada. Se ha demostrado claramente que todas ellas tienen la capacidad suficiente para producir películas delgadas uniformes y homogéneas en espesor a lo largo de todo el sustrato, y aunque en muchos artículos se han obtenido películas puras de BiFeO3 con una respuesta funcional aprovechable, otros han reportado los típicos inconvenientes que suele conllevar la obtención de este material: aparición de fases secundarias, corrientes de fuga altas o una pobre respuesta funcional. Sin embargo, hay un aspecto común en la literatura especializada que parece coincidir: el primer grupo de técnicas requiere de equipos muy sofisticados que implican un consumo energético alto en términos de temperatura y presión (vacío), mientras que las técnicas que se basan en disoluciones se caracterizan por su mayor simplicidad. En este contexto, el propósito de la presente revisión es resumir los principales aspectos de cada técnica en la obtención de películas delgadas de BiFeO3, desde las más sofisticadas hasta las más sencillas y respetuosas con el medio ambiente, con el fin de facilitar su comprensión., This work was conducted within the FPI program (Ref: BES-2014-067779). It was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through MAT2016-80182-R and MAT2013-40722-R projects. D.G.C. also acknowledges the Fundación General CSIC (ComFuturo Program) for the financial support., Peer reviewed