Pasar al contenido principal

CONTROL DEL GUIADO Y LA CONMUTACION DE EXCITACIONES DE ESPIN PARA PROCESADO MAGNONICO: ANISOTROPIAS DE INTERCARA Y REDES DE MOTIVOS LITOGRAFIADOS

MAT2013-47878-C2-1-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2013
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning Eu3+ emission in europium sesquioxide films by changing the crystalline phase

  • Mariscal, A.
  • Quesada, Adrián
  • Camps, I.
  • Palomares, F. Javier
  • Fernández Lozano, José Francisco
  • Serna, Rosalía
6 págs.; 6 figs., We report the growth of europium sesquioxide (EuO) thin films by pulsed laser deposition (PLD) in vacuum at room temperature from a pure EuO ceramic bulk target. The films were deposited in different configurations formed by adding capping and/or buffer layers of amorphous aluminum oxide (a-AlO). The optical properties, refractive index and extinction coefficient of the as deposited EuO layers were obtained. X-ray photoelectron spectroscopy (XPS) measurements were done to assess its chemical composition. Post-deposition annealing was performed at 500 °C and 850 °C in air in order to achieve the formation of crystalline films and to accomplish photoluminescence emission. According to the analysis of X-ray diffraction (XRD) spectra, cubic and monoclinic phases were formed. It is found that the relative amount of the phases is related to the different film configurations, showing that the control over the crystallization phase can be realized by adequately designing the structures. All the films showed photoluminescence emission peaks (under excitation at 355 nm) that are attributed to the intra 4f-transitions of Eu ions. The emission spectral shape depends on the crystalline phase of the EuO layer. Specifically, changes in the hypersensitive D → F emission confirm the strong influence of the crystal field effect on the Eu energy levels.© 2015 Elsevier B.V, Spanish Ministry of Economy and Competitiveness through the projectsTEC2012-38901-C02-01, MAT2013-47878-C2-1-R and MAT2013-48009-C4-1-P co-funded with FEDER funds. A.M. acknowledges thefinancial support through BES-2013-062593. I.C. acknowledges thefinancial support through JAE-Pre-2011 00578., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spectroscopic imaging ellipsometry of self-assembled SiGe/Si nanostructures

  • Alonso Carmona, M. Isabel
  • Funke, S.
  • González, A.
  • Garriga Bacardi, Miquel
  • Vaccaro, Pablo Óscar
  • Goñi, Alejandro R.
  • Ruiz, A.
  • Alonso, María
  • Thiesen, P.H.
Spectroscopic imaging ellipsometry is used to characterize films containing self-assembled SiGe/Si in-plane nanowires grown by molecular beam epitaxy on a Si(001) substrate. The spatial resolution of the order of ∼1 μm allows to study individual nanowires. The obtained images consist of both ψ and Δ values measured in every pixel. From them, spatially resolved contributions to the dielectric function within the films are well visible, coming for example from composition variations. In particular, a strong in-plane anisotropy of the optical response of the nanowires is evidenced. Spectroscopic measurements from different regions of the film are analyzed and compared to spectra calculated using standard ellipsometry multilayer models. The results show the potential of imaging ellipsometry to study micro- and nanostructured semiconductor samples., We acknowledge funding by the Spanish Ministry of Economy and Competitiveness (MINECO) through grants CSD2010-00044 (Consolider NANOTHERM), MAT2013-47878-C2-1-R, MAT2015-70850-P, and the “Severo Ochoa” Programme for Centres of Excellence in R&D (SEV-2015-0496)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-surface self-organization of a robust metal–organic cluster based on copper(I) with chloride and organosulphur ligands

  • Otero, Gonzalo
  • Hernández-Rodríguez, Irene
  • Martínez, José I.
  • Palacios-Rivera, Rogger
  • Palomares, F. Javier
  • López, María Francisca
  • Gallego, Almudena I.
  • Delgado, Salomé
  • Zamora, Félix
  • Méndez, Javier
  • Martín-Gago, José A.
Direct sublimation of a Cu4Cl4 metal–organic cluster on Cu(110) under ultra-high vacuum allows the formation of ultra-large well-organized metal–organic supramolecular wires. Our results show that the large monomers assemble with each other by π–π interactions connecting dipyrimidine units and are stabilized by the surface., We thank Spanish MINECO (Grants: MAT2013-46753-C2-1-P, MAT2013-47878-C2-1-R and MAT2011-26534) for financial support. JIM acknowledges a CSIC-JaeDoc fellowship, cofunded by ESF., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Europium monoxide nanocrystalline thin films with high near-infrared transparency

  • Mariscal, A.
  • Quesada, Adrián
  • Tarazaga Martín-Luengo, Aitana
  • García García-Tuñón, Miguel Ángel
  • Bonanni, A.
  • Fernández Lozano, José Francisco
  • Serna, Rosalía
5 pags., 3 figs., Nanocrystalline textured EuO thin films are prepared by an oxygen loss process from a pure EuO bulk ceramic target through pulsed laser deposition in vacuum at room temperature. X-ray diffraction spectra evidence a well-defined diffraction peak corresponding to the EuO phase textured along the (1 1 0) direction. Analysis of the XRD peak profile indicates that the films are nanocrystalline (average crystallite size of 11 nm) with a compressive residual strain. The formation of stoichiometric EuO is further confirmed by a strong signal from Eu in the X-ray photoelectron spectra. The complex refractive index in the near infrared has been determined by spectroscopic ellipsometry and shows that the EuO films have a high transparency (k < 10) and a refractive index of 2.1. A band-gap shift of 0.25 eV is found with respect to the EuO bulk. These films, deposited by an accessible and efficient method, open a new route to produce EuO films with optical quality, suitable for NIR optoelectronic components., This work has been financially supported by the Spanish Ministry of Economy and Competitiveness through the projects MINECO/FEDER TEC2015-69916-C2-1-R, MAT2013-47878-C2-1-R and MAT2013-48009-C4-1-P co-funded with FEDER funds. Support by the EC’s Horizon2020 Research and Innovation Programme (grant 645776), by the Austrian Science Fund – FWF (P24471 and P26830), and by the NATO Science for Peace Programme (grant 984735) is acknowledged. A.M. acknowledges the financial support through BES-2013-062593., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Growth and characterization of epitaxial in-plane SiGe alloy nanowires

  • Alonso Carmona, M. Isabel
  • Ruiz, Ana
  • Alonso, María
  • Bailo, Elena
  • Garriga Bacardi, Miquel
  • Molero, Alejandro
  • Vaccaro, Pablo Óscar
  • Goñi, Alejandro R.
Paper presented at the 12th European Conference on Thermoelectricity (ECT Madrid 2014), held in Madrid (Spain) 24-26th September 2014., We study the growth of in-plane SiGe alloy nanowires by molecular beam epitaxy on Si substrates using the vapor-liquid-solid mechanism. These horizontal nanowires grow from liquid AuSi seeds which are obtained by annealing Au layers deposited on clean Si(001) surfaces. By continuously supplying Ge to the liquid droplets, an epitaxial process takes place, where wires crawl along <110> directions of the Si substrate, giving rise to the reproducible achievement of self-assembled in-plane SiGe nanowires. The morphology of the obtained nanostructures is characterized by scanning electronic and atomic force microscopies, and their composition and strain status is evaluated by micro-Raman imaging., This work was supported by Spanish Ministry of Economy and Competitiveness (MINECO) through Grants No. CSD2010-00044 (Consolider NANOTHERM), MAT2010-18432, and MAT2013-47878-C2-1-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coercivity and morphology in Fe/NiO films deposited on nanoporous Al2O3 membranes

  • Navarro, Enrique
  • Palomares, F. Javier
  • Alonso, María
  • Cebollada, Federico
  • Domínguez-Cañizares, Guillermo
  • Gutiérrez, Alejandro
  • Soriano, Leonardo
  • González Fernández, Jesús María
[EN] The occurrence of ferro-antiferromagnetic (F/AF) interfaces in Fe/NiO bilayers brings about the possibility of controlling the Fe layer hysteretic properties through the unidirectional anisotropy induced by the presence of unbalanced, antiferromagnetic phase moments at that interface. In this work, we report on the Fe thickness and temperature dependencies of the hysteretic parameters measured in Fe/NiO bilayers deposited on AlO nanoporous membranes. The Fe/NiO bilayers grew in a six-fold columnar way around each one of the membrane nanopores. The in-plane hysteresis loops measured by field cooling the samples down to different temperatures below 300 K, evidenced the occurrence of coercive forces larger than that associated to the Fe anisotropy field and also of significant loop shifts, both of them clearly linked to the occurrence of exchange bias at the Fe/NiO interfaces. The magnetization reversal mechanism active in the Fe/NiO bilayers essentially differs from that responsible for the reversal occurring in continuous films incorporating lithographed antidots, due to the fact that in our samples it does not involve either domain wall propagation or pinning, and the reversal events are spatially restricted to the Fe-covered, hexagonally closely packed dot-like tops of the NiO columns., [ES] La presencia de intercaras ferro-antiferromagnéticas (F/AF) en bicapas de Fe/NiO permite modificar significativamente las propiedades de histéresis de la película de Fe mediante la anisotropía unidireccional, debido a la presencia de momentos de la fase antiferromagnética descompensados en la intercara. En este trabajo estudiamos la influencia del espesor de Fe y de la temperatura sobre los parámetros de histéresis de bicapas de Fe/NiO depositadas sobre membranas porosas de Al2O3. Dichas bicapas crecen con estructura columnar hexagonal en torno a los poros de las membranas. Los ciclos de histéresis, medidos tras enfriar con campo a varias temperaturas por debajo de 300 K, han mostrado campos coercitivos mayores que los esperables considerando el campo de anisotropía del Fe y la existencia de desplazamientos de los ciclos hacia campos negativos, efectos ligados a la existencia de «exchange bias» en las intercaras Fe/NiO. El mecanismo de conmutación activo en las bicapas difiere del que tiene lugar en películas continuas litografiadas con «antidots». Ello es debido a que en nuestras muestras no se producen propagación y enganches de paredes y, además, a que la inversión de la imanación está espacialmente localizada en las estructuras de Fe tipo «dot» que recubren las columnas de NiO., Work supported by the Spanish MINECO (Ministerio de Economía y Competitividad) under Projetcs MAT2013-47878-C2-1-R and MAT2013-47878-C2-2-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adsorption of chromium(VI) onto electrochemically obtained magnetite nanoparticles

  • Martínez, L. J.
  • Muñoz-Bonilla, Alexandra
  • Mazarío, Eva
  • Recio, F. J.
  • Palomares, F. Javier
  • Herrasti, P.
Well-dispersed magnetite nanoparticles of different sizes between 15 and 43 nm were synthesized by an electrochemical method in a controlled manner by simply changing the synthesis temperature. These nanoparticles were used as a reusable adsorbent to remove Cr(VI) from aqueous solution. The recovery efficiency was found to be highly dependent on environmental parameters, such as temperature and pH. In addition, it was demonstrated that the initial concentrations of both Cr(VI) and magnetite nanoparticles strongly influence the removal capability of these nanomaterials. Remarkably, the nanoparticle size has a key role on the Cr(VI) adsorption efficiency, which gradually increases as the diameter decreases due to the augmentation of the surface area. The low aggregation in the case of small particles that results from the low magnetization saturation values also contributes to the enhancement of the surface area available for Cr(VI) adsorption. In contrast, nanoparticles with larger sizes are more easily manipulated by a magnet, and the efficiency is largely maintained after five cycles. The adsorption process fits the Langmuir isotherm model well, and the reaction was found to follow a pseudo-second-order rate., The authors are grateful to the Spanish Ministry of Science and Innovation (MAT2012-37109-C02-02, MAT2013-47878-C2-1-R and CSD2008-00023).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of blue faceted anatase nanoparticles through extensive fluorine lattice doping

  • Calatayud, David G.
  • Jardiel, Teresa
  • Peiteado, Marco
  • Illas, Francesc
  • Giamello, Elio
  • Palomares, F. Javier
  • Fernández Hevia, D.
  • Caballero Cuesta, Amador
An effective synthesis strategy for the extensive fluorination of the TiO2 anatase lattice has been developed which provides a highly stable blue-colored titania powder. The process also produces a convenient faceted morphology of the doped nanoparticles. Both theoretical and experimental data indicate an ordered atomic structure, in which an exceptionally high amount of fluorine ions substitute oxygen ions in the TiO2 lattice. The extra-electrons borne by fluorine are stabilized by lattice Ti cations via a mechanism of valence induction, eventually leading to a consequent high amount of reduced Ti3+ centers. Such structure, whose general formula can be expressed as Ti4+(1-x)Ti3+xO2–(2-x)F–x, confers an excellent stability to the as-synthesized nanoparticles (in spite of the excess electrons), explaining for example why the blue color is retained even upon storage in ambient atmosphere. But moreover, the high concentration of the relatively shallow Ti3+ generated states also form a sort of sub-band close to the bottom of the conduction band itself. The whole effect results in a tangible decrease (0.2 eV) of the anatase band gap which allows an inspiring upgrading of its UV photocatalytic activity. Our results also suggest that narrowing the band gap is insufficient for a substantial improvement in the visible light harvesting., This work was supported by the Spanish Ministry of Economy and Competitiveness (MINECO) through the projects IPT-2011-1113-310000 (NANOBAC), MAT2013-40722-R (SCOBA), MAT2013-47878-C2-1-R and CTQ2012-30751 and by the Comunidad de Madrid through the project MULTIMAT-CHALLENGE P2013/MIT-2862. T.J. also acknowledges the European Science Foundation (ESF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the low magnetic field on the electrodeposition of CoxNi100 − x alloys

  • Olvera, S.
  • Arce Estrada, E. M.
  • Sánchez-Marcos, J.
  • Palomares, F. Javier
  • Vázquez Burgos, Luis
  • Herrasti, P.
Magnetic, chemical and structural properties of electrosynthesized CoxNi100 − x have been studied. The electrodeposition has been conducted both in the presence and absence of a low magnetic field. The application of a perpendicular magnetic field during the synthesis modified slightly the morphology of the alloys. These changes depend more on the film composition than on the applied field, as demonstrated by AFM images. In the absence of magnetic field, the CoxNi100 − x film grows along the (200) direction. However, when the magnetic field was applied, a preferential orientation along the (111) direction was observed. No important magnetic changes are induced by the presence of the magnetic field during the growth. Based on X-ray photoelectron spectroscopy (XPS) and energy dispersive X-ray spectroscopy (EDX) experiments, the chemical composition of the films was preserved during preparation regardless of whether or not magnetic field is applied. There has been observed an increase in deposition rate in the presence of field even at these low magnetic fields., The authors are grateful to the Spanish Ministry of Science and Innovation (MAT2012-37109-C02-02, MAT2013-47878-C2-1-R, FIS2012-38866-C05-05 and SIP-IPN (20130361)) and Comunidad Autónoma de Madrid (NANOAVANSENS S2013/MIT 3029) for their financial support. S. Olvera also wishes to thank IPN-PIFI-ESIQIE and CONACYT for a scholarship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Self-organised silicide nanodot patterning by medium-energy ion beam sputtering of Si(100): local correlation between the morphology and metal content

  • Redondo-Cubero, A.
  • Galiana, Beatriz
  • Lorenz, K.
  • Palomares, F. Javier
  • Bahena, D.
  • Ballesteros, C.
  • Hernández-Calderón, I.
  • Vázquez Burgos, Luis
We have produced self-organised silicide nanodot patterns by medium-energy ion beam sputtering (IBS) of silicon targets with a simultaneous and isotropic molybdenum supply. Atomic force microscopy (AFM) studies show that these patterns are qualitatively similar to those produced thus far at low ion energies. We have determined the relevance of the ion species on the pattern ordering and properties. For the higher ordered patterns produced by Xe ions, the pattern wavelength depends linearly on the ion energy. The dot nanostructures are silicide-rich as assessed by x-ray photoelectron spectroscopy (XPS) and emerge in height due to their lower sputtering yield, as observed by electron microscopy. Remarkably, a long wavelength corrugation is observed on the surface which is correlated with both the Mo content and the dot pattern properties. Thus, as assessed by electron microscopy, the protrusions are Mo-rich with higher and more spaced dots on their surface whereas the valleys are Mo-poor with smaller dots that are closer to each other. These findings indicate that there is a correlation between the local metal content of the surface and the nanodot pattern properties both at the nanodot and the large corrugation scales. These results contribute to advancing the understanding of this interesting nanofabrication method and aid in developing a comprehensive theory of nanodot pattern formation and evolution., This work has been partially supported by MINECO (Spain) grants FIS2012-38866-C05-05 and MAT2013-47878-C2-1-R, and the Spanish Government (Project ENARDECEL50 TEC2014-54260-C3-2-P), as well as by the Comunidad Autónoma de Madrid (Project NANOAVANSENS S2013/MIT-3029). TEM work has been conducted at the LABMET laboratory, associated with Red de Laboratorios of CAM, Spain, and also at LANE-Cinvestav in Mexico City. A.R.C. acknowledges funding from the Juan de la Cierva program (Spain) under contract no. JCI-2012-14509; KL acknowledges funding from FCT (Portugal) through the program Investigador FCT.