Pasar al contenido principal

COLOIDES DE NANOPARTICULAS MAGNETICAS PARA CATALISIS, SALUD Y MEDIOAMBIENTE

MAT2017-88148-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Whither magnetic hyperthermia? A tentative roadmap

  • Rubia Rodríguez, Irene
  • Santana Otero, Antonio
  • Spassov, Simo
  • Tombácz, Etelka
  • Johansson, Christer
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Teran, Francisco J.
  • Puerto Morales, María del
  • Veintemillas Verdaguer, Sabino
  • Thanh, Nguyen T. K
  • Ortega, Daniel
The scientific community has made great efforts in advancing magnetic hyperthermia for the last two decades after going through a sizeable research lapse from its establishment. All the progress made in various topics ranging from nanoparticle synthesis to biocompatibilization and in vivo testing have been seeking to push the forefront towards some new clinical trials. As many, they did not go at the expected pace. Today, fruitful international cooperation and the wisdom gain after a careful analysis of the lessons learned from seminal clinical trials allow us to have a future with better guarantees for a more definitive takeoff of this genuine nanotherapy against cancer. Deliberately giving prominence to a number of critical aspects, this opinion review offers a blend of state-of-the-art hints and glimpses into the future of the therapy, considering the expected evolution of science and technology behind magnetic hyperthermia.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the Sodium Polyacrylate on the Magnetite Nanoparticles Produced by Green Chemistry Routes: Applicability in Forward Osmosis

  • Zufía-Rivas, Juan
  • Morales, María Del Puerto
  • Veintemillas-Verdaguer, S.
Aqueous dispersions of magnetic nanocomposites have been proposed as draw electrolytes in forward osmosis. One possible approach for the production of nanocomposites based on magnetite nanoparticles and sodium polyacrylate is the synthesis of the magnetic iron oxide by coprecipitation or oxidative precipitation in the presence of an excess of the polymer. In this work, we explored the effect of the polymer proportion on the nanomaterials produced by these procedures. The materials obtained were compared with those obtained by the coating of magnetite nanocrystals produced beforehand with the same polymer. The samples were characterized by chemical analysis, photon correlation spectroscopy, thermogravimetry, X-ray diffraction, infrared spectroscopy, transmission electron microscopy, and magnetometry. The general trend observed is that the polymers heavily modify the texture of the magnetic material during the synthesis, with a drastic reduction of the particle size and magnetic response. The polycrystalline texture that is generated permits the incorporation of the polymer both on the external surface and in the intergranular space. The aqueous dispersions of the nanocomposites were highly stable, with a hydrodynamic size that was roughly independent of the polymer/magnetite ratio. Such dispersions show an osmotic pressure that is proportional to the concentration of the polymer. Interestingly, the proportionality constant was similar to that of the free polymer only in the case of the samples prepared by oxidative precipitation, being lower in the case of the samples prepared by coprecipitation. Finally, the possibilities of using these materials as draw electrolytes in forward osmosis will be briefly discussed., This research was funded by the Spanish Ministry of Economy and Competitiveness grant number MAT2017-88148-R and by several research contracts with Jayim Mayim S. L., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biomineral reactivity: the kinetics of the replacement reaction of biological aragonite to apatite

  • Greiner, Martina
  • Fernández Díaz, Lurdes
  • Griesshaber, Erika
  • Zenkert, Moritz N.
  • Yin, Xiaofei
  • Ziegler, Andreas
  • Veintemillas-Verdaguer, S.
  • Schmahl, Wolfgang W.
We present results of bioaragonite to apatite conversion in bivalve, coral and cuttlebone skeletons, biological hard materials distinguished by specific microstructures, skeletal densities, original porosities and biopolymer contents. The most profound conversion occurs in the cuttlebone of the cephalopod Sepia officinalis, the least effect is observed for the nacreous shell portion of the bivalve Hyriopsis cumingii. The shell of the bivalve Arctica islandica consists of cross-lamellar aragonite, is dense at its innermost and porous at the seaward pointing shell layers. Increased porosity facilitates infiltration of the reaction fluid and renders large surface areas for the dissolution of aragonite and conversion to apatite. Skeletal microstructures of the coral Porites sp. and prismatic H. cumingii allow considerable conversion to apatite. Even though the surface area in Porites sp. is significantly larger in comparison to that of prismatic H. cumingii, the coral skeleton consists of clusters of dense, acicular aragonite. Conversion in the latter is sluggish at first as most apatite precipitates only onto its surface area. However, the process is accelerated when, in addition, fluids enter the hard tissue at centers of calcification. The prismatic shell portion of H. cumingii is readily transformed to apatite as we find here an increased porosity between prisms as well as within the membranes encasing the prisms. In conclusion, we observe distinct differences in bioaragonite to apatite conversion rates and kinetics depending on the feasibility of the reaction fluid to access aragonite crystallites. The latter is dependent on the content of biopolymers within the hard tissue, their feasibility to be decomposed, the extent of newly formed mineral surface area and the specific biogenic ultra- and microstructures., This research was partially funded by projects CGL2016-77138-C2-1-P (MECC-Spain) and MAT2017-88148-R (MECC-Spain) (S.V.V. and L.F.-D.). M.G. is supported by the Deutsche Forschungsgemeinschaft, DFG Grant Gr 959/20-1,2., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cu-doped extremely small iron oxide nanoparticles with large longitudinal relaxivity: One-pot synthesis and in vivo targeted molecular imaging

  • Fernández-Barahona, Irene
  • Gutiérrez, Lucía
  • Veintemillas-Verdaguer, S.
  • Pellico, Juan
  • Morales, María Del Puerto
  • Catala, Mauro
  • Pozo, Miguel A. del
  • Ruiz-Cabello, Jesús
  • Herranz, Fernando
Synthesizing iron oxide nanoparticles for positive contrast in magnetic resonance imaging is the most promising approach to bring this nanomaterial back to the clinical field. The success of this approach depends on several aspects: the longitudinal relaxivity values, the complexity of the synthetic protocol, and the reproducibility of the synthesis. Here, we show our latest results on this goal. We have studied the effect of Cu doping on the physicochemical, magnetic, and relaxometric properties of iron oxide nanoparticles designed to provide positive contrast in magnetic resonance imaging. We have used a one-step, 10 min synthesis to produce nanoparticles with excellent colloidal stability. We have synthesized three different Cu-doped iron oxide nanoparticles showing modest to very large longitudinal relaxivity values. Finally, we have demonstrated the in vivo use of these kinds of nanoparticles both in angiography and targeted molecular imaging. ©, This study was supported by grants from the Spanish Ministry for Economy and Competitiveness (MEyC) (SAF2016-79593-P, MAT2017-88148-R, and SAF2017-84494-C2-R), Comunidad de Madrid (S2017/BMD-3875), and Instituto de Salud Carlos III (DTS16/00059). L.G. received financial support from the Ramońy Cajal subprogram (RYC-2014-15512). J.R.-C. acknowledges funding from the Programa Red Guipuzcoana de Ciencia, Tecnología e Información (2018-CIEN-000058-01). I.F.-B. thanks Comunidad de Madrid (B2017/BMD-3875). This work was performed under the Maria de Maeztu Units of Excellence Program from the Spanish State Research Agency (Grant No. MDM-2017-0720), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aggregation effects on the magnetic properties of iron oxide colloids

  • Gutiérrez, Lucía
  • Cueva, Leonor de la
  • Moros, María
  • Mazarío, Eva
  • Bernardo, Sara de
  • Fuente, Jesús M. de la
  • Morales, María Del Puerto
  • Salas, Gorka
Magnetic nanoparticles (MNPs), and in particular iron oxide nanoparticles (mainly magnetite and maghemite), are being widely used in the form of aqueous colloids for biomedical applications. In such colloids, nanoparticles tend to form assemblies, either aggregates, if the union is permanent, or agglomerates, if it is reversible. These clustering processes have a strong impact on the MNPs' properties that are often not well understood. In this review, the causes and consequences of MNPs aggregation/agglomeration are reviewed and discussed. Special attention has been paid to the impact of the MNPs aggregation/agglomeration on their magnetic properties and heating properties, when exposed to an alternating magnetic field in the frame of magnetic hyperthermia. In addition, a model system with MNPs of two different sizes coated with three different molecules oleic acid, meso-2, 3-dimercaptosuccinic acid and poly(maleic anhydride-alt-1-octadecene) has been characterized and the results used to support the ideas reviewed., This work was supported by Fondo Social de la DGA (grupos DGA, BIONANOSURF), Ministerio de la Economía y Competitividad del Gobierno de España for the public funding of Proyectos I+D+I—Programa Estatal de Investigación, Desarrollo e Innovación Orientada a los Retos de la Sociedad (projects MAT2017-88148-R, MAT2015-71806-R and SAF2014-54763-C2-2-R), Comunidad de Madrid (Project NANOFRONTMAG-CM, S2013/MIT-2850), and ERCStarting Grant 239931-NANOPUZZLE. IMDEA Nanociencia acknowledges support from the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686). LG acknowledges financial support from the Ramón y Cajal subprogram (RYC-2014-15512)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the influence of a bifunctional polyethylene glycol derivative in protein corona formation around iron oxide nanoparticles

  • Ruiz, Amalia
  • Alpízar, Adán
  • Beola, Lilianne
  • Rubio, Carmen
  • Gavilán, Helena
  • Marciello, Marzia
  • Rodríguez-Ramiro, Ildefonso
  • Ciordia, Sergio
  • Morris, Christopher J.
  • Morales, María Del Puerto
Superparamagnetic iron oxide nanoparticles are one of the most prominent agents used in theranostic applications, with MRI imaging the main application assessed. The biomolecular interface formed on the surface of a nanoparticle in a biological medium determines its behaviour in vitro and in vivo. In this study, we have compared the formation of the protein corona on highly monodisperse iron oxide nanoparticles with two different coatings, dimercaptosuccinic acid (DMSA), and after conjugation, with a bifunctional polyethylene glycol (PEG)-derived molecule (2000 Da) in the presence of Wistar rat plasma. The protein fingerprints around the nanoparticles were analysed in an extensive proteomic study. The results presented in this work indicate that the composition of the protein corona is very difficult to predict. Proteins from different functional categories—cell components, lipoproteins, complement, coagulation, immunoglobulins, enzymes and transport proteins—were identified in all samples with very small variability. Although both types of nanoparticles have similar amounts of bonded proteins, very slight differences in the composition of the corona might explain the variation observed in the uptake and biotransformation of these nanoparticles in Caco-2 and RAW 264.7 cells. Cytotoxicity was also studied using a standard 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay. Controlling nanoparticles’ reactivity to the biological environment by deciding on its surface functionalization may suggest new routes in the control of the biodistribution, biodegradation and clearance of multifunctional nanomedicines, This work was partially supported by the collaborative project CSIC-CITMA (B01CU2009; ICMM, 2011–2014, MAT2017-88148R). A.R. was supported by FP7-People Framework–Marie Curie Industry and Academia Partnerships and Pathways scheme (DNA-TRAP project, grant agreement nr. 612338)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Flower-like Mn-doped magnetic nanoparticles functionalized with αvβ3-integrin-ligand to efficiently induce intracellular heat after alternating magnetic field exposition, triggering glioma cell death

  • Del Sol-Fernández, Susel
  • Portilla, Yadileiny
  • Gutiérrez, Lucía
  • Odio, Oscar F.
  • Reguera, E.
  • Barber, Domingo F.
  • Morales, María Del Puerto
Despite the potential of magnetic nanoparticles (NPs) to mediate intracellular hyperthermia when exposed to an alternating magnetic field (AMF), several studies indicate that the intracellular heating capacity of magnetic NPs depends on factors such as cytoplasm viscosity, nanoparticle aggregation within subcellular compartments, and dipolar interactions. In this work, we report the design and synthesis of monodispersed flowerlike superparamagnetic manganese iron oxide NPs with maximized SAR (specific absorption rate) and evaluate their efficacy as intracellular heaters in the human tumor-derived glioblastoma cell line U87MG. Three main strategies to tune the particle anisotropy of the core and the surface to reach the maximum heating efficiency were adopted: (1) varying the crystalline anisotropy by inserting a low amount of Mn2+ in the inverse spinel structure, (2) varying the NP shape to add an additional anisotropy source while keeping the superparamagnetic behavior, and (3) maximizing NP-cell affinity through conjugation with a biological targeting molecule to reach the NP concentration required to increase the temperature within the cell. We investigate possible effects produced by these improved NPs under the AMF (f = 96 kHz, H = 47 kA/m) exposure in the glioblastoma cell line U87MG by monitoring the expression of hsp70 gene and reactive oxygen species (ROS) production, as both effects have been described to be induced by increasing the intracellular temperature. The induced cell responses include cellular membrane permeabilization and rupture with concomitant high ROS appearance and hsp70 expression, followed by cell death. The responses were largely limited to cells that contained the NPs exposed to the AMF. Our results indicate that the developed strategies to optimize particle anisotropy in this work are a promising guidance to improve the heating efficiency of magnetic NPs in the human glioma cell line., This work was supported by the Spanish Ministerio de Ciencia, Innovación y Universidades, under the following projects: Project MAT2017-88148-R, SAF-2017-82223-R, PIE-201760E007, and Nanobioap cluster of excellence under project MAT2016-81955-REDT., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of the surface charge on the adsorption capacity of chromium(VI) of iron oxide magnetic nanoparticles prepared by microwave-assisted synthesis

  • Gallo-Cordova, Álvaro
  • Morales, María Del Puerto
  • Mazarío, Eva
Solid phase extraction using magnetic nanoparticles has represented a leap forward in terms of the improvement of water quality, preventing the contamination of industrial effluents from discharge in a more efficient and affordable way. In the present work, superparamagnetic iron oxide nanoparticles (MNP) with different surface charges are tested as nanosorbents for the removal of chromium(VI) in aqueous solution. Uniform magnetic nanoparticles (~12 nm) were synthesized by a microwave polyol-mediated method, and tetraethyl orthosilicate (TEOS) and (3-aminopropyl) triethoxysilane (APTES) were grafted onto their surface, providing a variation in the surface charge. The adsorptive process of chromium was evaluated as a function of the pH, the initial concentration of chromium and contact time. Kinetic studies were best described by a pseudo-second order model in all cases. TEOS@MNP barely removed the chromium from the media, while non-grafted particles and APTES@TEOS@MNP followed the Langmuir model, with maximum adsorption capacities of 15 and 35 mgCr/g, respectively. The chromium adsorption capacities abruptly increased when the surface became positively charged as the species coexisting at the experimental pH are negatively charged. Furthermore, these particles have proven to be highly efficient in water remediation due their 100% reusability after more than six consecutive adsorption/desorption cycles., This research was funded by the Spanish Ministry of Economy and Competitiveness under grants MAT2017-88148-R, PGC2018-095642-B-I00 and Juan de la Cierva Formación FJCI-2015-23702., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Continuous production of magnetic iron oxide nanocrystals by oxidative precipitation

  • Asimakidou, T.
  • Makridis, A.
  • Veintemillas-Verdaguer, S.
  • Morales, María Del Puerto
  • Kellartzis, I.
  • Mitrakas, M.
  • Vourlias, G.
  • Angelakeris, M.
  • Simeonidis, K.
[EN] Continuous processes are always preferred over batch ones when reproducible and scalable industrial procedures are needed. This work illustrates the production of magnetite nanoparticles by oxidative precipitation in aqueous media, following a continuous approach that offers additional advantages. Particularly, the developed reaction setup succeeds (i) the complete separation of the green rust’s precipitation from Fe3O4 nucleation, (ii) the achievement of constant concentrations in all ionic and solid forms throughout the production line when steady-state is reached, what means constant supersaturation from both the formation of green rust and Fe3O4, and (iii) the possibility to control critical parameters, such as OH- excess over the initial stoichiometric Fe(OH)2 precipitation, through online regulation of synthesis parameters such as the reactor’s pH and redox potential. Importantly, continuous flow synthesis of Fe3O4 nanoparticles enables high production capacities, low energy consumption and proportional scale-up at any volume. As a proof of concept, obtained nanoparticles were evaluated according to their magnetic response as potential magnetic hyperthermia agents indicating significant improvement of heating efficiency that goes up to 1.5-2 kW/gFe3O4 for both smaller (~40 nm) and larger (~200 nm) particles., Scientific work was financially supported through an IKY scholarship (MIS 5033021) co-financed by E.U. (European Social Fund - ESF) and Greek national funds through the action "Reinforcement of Postdoctoral Researchers-2nd call" of the Operational Programme "Human Resources Development Program, Education and Lifelong Learning" of the National Strategic Reference Framework (NSRF) 2014 – 2020. Part of the study was implemented within the frame of MagnoTher project funded by Stavros Niarchos Foundation and Eastern Macedonia and Thrace Institute of Technology fellowships for assisting young scientists in prototyping innovative products by using cutting-edge technology. Funding by the Spanish Ministry of Economy and Competitiveness, COMANCHE project, No MAT2017-88148-R and the EU project H2020-FETOPEN- RIA 829162, HOTZYMES is also acknowledged., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Doped-Iron Oxide Nanocrystals Synthesized by One-Step Aqueous Route for Multi-Imaging Purposes

  • Luengo, Yurena
  • Roldán, Manuel A.
  • Varela, María
  • Herranz, Fernando
  • Morales, María Del Puerto
  • Veintemillas-Verdaguer, S.
[EN] New doped inorganic nanocrystals (NC) consisting on iron oxide and other metal integrated into the structure have been synthesized in one-step by adapting the oxidant precipitation synthesis route for magnetite. Different metals have been chosen to confer extra and unique properties to the resulting magnetic hetero-nanostructure: Co and Gd for enhancing transversal and longitudinal relaxivities for magnetic resonance imaging and Bi and Au for achieving X-ray absorption for computed tomography imaging. Apart of that, gold optical properties are interesting for photothermal therapy and iron oxides for magnetic hyperthermia. All metals have been incorporated into the magnetite structure in different ways during the synthesis: by forming a solid solution, by modifying the surface of the NCs, or by co-crystallization with the magnetite. The nanostructure formed in each case depends on the ionic radius of the secondary metal ion and the solubility of its hydroxide that control the co-precipitation in the initial steps of the reaction. Magnetic properties and imaging capabilities of the hetero-nanostructures have been analyzed as a function of the element distribution. Due to the synergistic combination of the different element properties, these magnetic hetero-nanostructures have great potential for biomedical applications., Thanks to the general services from ICMM (X-ray, ICP) and URJC, in particular to Jesus Gonzalez for TEM images, and to the NAP group of Institute of Nanoscience of Aragon (INA), in particular to Laura Asín and Lucía Gutiérrez for the SAR measurement assistance. The work has been supported by the Spanish Ministerio de Ciencia, Innovación y Universidades under the following projects: Project MAT2017-88148-R and PIE-201760E007. STEM/EELS observations at Oak Ridge National Laboratory (ORNL) U.S. Department of Energy (DOE), Basic Energy Sciences (BES), Materials Sciences and Engineering Division and through the Center for Nanophase Materials Sciences (CNMS), which is sponsored by the Scientific User Facilities Division, DOE-BES. Research at UCM supported by MINECO-FEDER MAT2015-66888-C3-3-R. Thanks to SAF2016-79593-P project and to Nanobioapcluster of excellence supported by the Ministry of Economy and Competitiveness of Spanish Government through MAT2016-81955-REDT.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

99mTc-, 90Y-, and 177Lu-Labeled Iron Oxide Nanoflowers Designed for Potential Use in Dual Magnetic Hyperthermia/Radionuclide Cancer Therapy and Diagnosis

  • Ognjanović, Miloš
  • Radović,Magdalena
  • Mirković, Marija
  • Prijović, Željko
  • Morales, María Del Puerto
  • Čeh, Miran
  • Vranješ-Đurić, Sanja
  • Antic, Bratislav
[EN] Development of a complex based on iron oxide nanoparticles (IONPs) for diagnosis and dual magnetic hyperthermia/radionuclide cancer therapy accomplishing high yields of radiolabeling and great magnetic heat induction is still a challenge. We report here the synthesis of citric acid, poly(acrylic acid) (PAA) and poly(ethylene glycol) coated IONPs and their labeling with three radionuclides, namely, technetium (Tc), yttrium (Y), and lutetium (Lu), aiming at potential use in cancer diagnosis and therapy. Polyol-synthesized IONPs are a flowerlike structure with 13.5 nm spherically shaped cores and 24.8 nm diameter. PAA-coated nanoparticles (PAA@IONP) showed the best characteristics such as easy radiolabeling with very high yields (>97.5%) with all three radionuclides, and excellent in vitro stabilities with less than 10% of radionuclides detaching after 24 h. Heating ability of PAA@IONP in an alternating external magnetic field showed intrinsic loss power value of 7.3 nH m/kg, which is one of higher reported values. Additionally, PAA@IONP itself presented no significant cytotoxicity to the CT-26 cancer cells, reaching IC50 at 60 μg/mL. However, under the external magnetic field, they show hyperthermia-mediated cells killing, which correlated with the magnetic field strength and time of exposure. Since PAA@IONP are easy to prepare, biocompatible, and with excellent magnetic heat induction, these nanoparticles radiolabeled with high-energy beta emitters Y and Lu have valuable potential as agent for dual magnetic hyperthermia/radionuclide therapy, while radiolabeled with Tc could be used in diagnostic imaging., The authors gratefully acknowledge the support provided by the Eureka Project (E!9982) and Project No. III45015 funded by the Serbian Ministry of Education, Science and Technological Development, EU funded project FP7-EraChairs-MagBioVin (Grant No. 621375) and by the Spanish Ministerio de Ciencia, Innovación y Universidades (MAT2017-88148-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Combined magnetoliposome formation and drug loading in one step for efficient AC-magnetic Field Remote Controlled Drug Release

  • Fortes Brollo, María Eugenia
  • Domínguez-Bajo, Ana
  • Tabero, Andrea
  • Domínguez-Arca, Vicente
  • García-Gisbert, Víctor
  • Prieto, Gerardo
  • Johansson, Christer
  • García García, Ricardo
  • Villanueva, Angeles
  • Serrano, María C.
  • Morales, María Del Puerto
[EN] We have developed a reproducible and facile one step strategy for the synthesis of doxorubicin loaded magnetoliposomes by using a thin-layer evaporation method. Liposomes of around 200 nm were made of 1,2-Dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and iron oxide nanoparticles (NP) with negative, positive and hydrophobic surfaces that were incorporated outside, inside or between the lipid bilayers, respectively. To characterize how NP are incorporated in liposomes, advanced cryoTEM and atomic force microscope (AFM) techniques have been used. It was observed that only when the NP are attached outside the liposomes, the membrane integrity is preserved (lipid melt transition shifts to 38.7 ºC with high enthalpy 34.8 J/g) avoiding the leakage of encapsulated drug while having good colloidal properties and the best heating efficiency under an alternating magnetic field (AMF). These magnetoliposomes were tested with two cancer cell lines, MDA-MB-231 and HeLa cells. First, 100 % of cellular uptake was achieved with a high cell survival (above 80 %), which is preserved for doxorubicin loaded magnetoliposomes (83 %). Then, we demonstrate that doxorubicin release can be triggered by remote control using a non-invasive external AMF for 1 hour, leading to a cell survival reduction of 20 %. Magnetic field conditions of 202 kHz and 30 mT seem to be enough to produce an effective heating avoiding drug degradation. In conclusion, these drug loaded magnetoliposomes prepared in one step could be used for an efficient drug release on demand at a specific time and place using an external AMF and reducing or even eliminating side effects., M. E. F. Brollo acknowledges the Brazilian agency CNPq for the grant [232947/2014-7] within the Science without Borders program and the COST action program for the grant [TD1402 – 38989]. The work was supported by the Spanish Government under projects MAT2017-88148-R (AEI/FEDER, UE), MAT2016-76507-R, CTQ2016-78454-C2-2-R, by the Comunidad de Madrid (S2018/NMT-4321 NANOMAGCOST-CM), the European Research Council through ERC-AG grant 340177. IMDEA Nanociencia acknowledges support from the ‘Severo Ochoa’ Programme for Centres of Excellence in R&D (MINECO, Grant SEV-2016-0686). The characterization was performed using the ICMM/CSIC general services (X-ray, ICP). ACS analyses were performed at RISE Acreo in Gothenburg, Sweden and cryo-TEM images were taken by Dr. Francisco Javier Chichón at the Cryo-EM facility (CiB-CNB-CSIC) placed on the National Center for Biotechnology in Madrid, Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Slow magnetic relaxation in well crystallized, monodispersed, octahedral and spherical magnetite nanoparticles

  • Navarro, Enrique
  • Luengo, Yurena
  • Veintemillas-Verdaguer, S.
  • Morales, María Del Puerto
  • Palomares, F. Javier
  • Urdiroz, Unai
  • Cebollada, Alfonso
  • González Fernández, Jesús María
[EN] Thermally activated relaxation over energy barriers concurrently related to local properties and interparticle interactions constitutes a major contribution to both the coercivity and the applied field frequency dependence of that quantity. We have measured the slow magnetic relaxation of magnetite nanoparticles (NPs), synthetized by using the oxidative precipitation technique, having spherical and octahedral shapes, monodispersed size distributions and similar transverse dimensions. From our relaxation data we evaluated the temperature dependencies of a) the irreversible demagnetization susceptibility, b) the fluctuation field (associated to the thermally induced demagnetization occurring during the measuring time range) and c) the activation volume (corresponding to the demagnetization produced by the fluctuation field). We conclude that i) the irreversible susceptibility peaks in both samples at ca. 135 K (Verwey transition temperature) and ii) the monotonically increasing temperature variation of the activation volume shows the same values in both samples for temperatures below ca. 135 K and at 290 K reaches values corresponding to 10 and 30 times the average particle volume of the spherical and octahedral NPs, respectively. Those large increases of the activation volume are compatible with a transition from local to collective of the thermally activated processes., The authors gratefully acknowledge the financial support from the Spanish Ministry of Economy and Competitiveness and Spanish Research Agency under grants no. MAT2016-80394-R and MAT2017-88148-R (FEDER EU). FC and JMG would like to dedicate this work to the memory of Dr. D. Givord
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Smartphone‐based colorimetric method to quantify iron concentration and to determine the nanoparticle size from suspensions of magnetic nanoparticles

  • Fernández-Afonso, Yilian
  • Salas, Gorka
  • Fernández-Barahona, Irene
  • Herranz, Fernando
  • Grüttner, Cordula
  • Fuente, Jesús M. de la
  • Morales, María Del Puerto
  • Gutiérrez, Lucía
Advanced uses of smartphones are changing lifestyles, and may have a great impact in materials science in the near future. In this work, the use of these devices to develop fast, simple, and cheap methods to characterize magnetic nanoparticle suspensions is tested. A series of dilutions of a wide library of magnetic nanoparticles, composed of iron oxide materials in the range between 3 and 43 nm, with two different shapes and four different coatings is prepared. The colloid color is analyzed using the RGB (red, green, blue) color model. Ratios of these parameters are correlated with the suspension iron concentration and with the nanoparticles average size. A linear relationship between the color (in particular the G/R ratio) and both the colloid iron content and the particles size is found. The link between these parameters allows the development of two new methods to determine either the concentration or the particle size of magnetic nanoparticle suspensions just by acquiring images from suspensions of iron oxide magnetic nanoparticles with a smartphone., This work was funded by European Commission (project NoCanTher, H2020, GA 685795), Spanish MINECO (SAF2016‐79593‐P to F.H., MAT2017‐88148R (AEI/FEDER, UE) to M.P.M., MAT2015‐71806‐R to G.S. and PGC2018‐096016‐B‐I00 to L.G.), and Fondo Social de la DGA (grupos DGA). Support from the Nanocare Network (RED2018‐102469‐T financed by the Spanish MCIU) is also acknowledged. Y.F‐A. thanks Santander‐Universidad Zaragoza Fellowship program for her Ph.D. position. L.G. acknowledges financial support from the Ramón y Cajal program (RYC‐2014‐15512)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Superparamagnetic nanosorbent for water purification: Assessment of the adsorptive removal of lead and methyl orange from aqueous solutions

  • Gallo-Cordova, Álvaro
  • Lemus, J.
  • Palomares, F. Javier
  • Morales, María Del Puerto
  • Mazarío, Eva
[EN] The present study describes the preparation of 50.3 nm superparamagnetic nanosorbents with high surface area for the adsorptive removal of lead and methyl orange from water. This material is based on the surface modification of iron oxide superparamagnetic nanoparticles with a double-shell coating of mesoporous silica whose porosity was increased up to 570 m/g by the addition of a porogenic material and its calcination. The adsorptive performance of the nanosorbent was evaluated as a function of several parameters (e.g. solution pH, pollutant initial concentration, and contact time), concluding that pHs around 5 are needed to avoid precipitation of Pb as Pb(OH) and the equilibrium adsorption capacity is reached after 2 h in all cases. The experimental data on the adsorption capacity of lead and methyl orange onto the nanosorbent were fit to a pseudo-second order kinetic model and Langmuir isotherm model. The maximum adsorption capacity value increases from 35 up to 50 mg/g for lead removal with increasing nanosorbent surface area. Contrary, for methyl orange the maximum adsorption goes up to 240 mg/g, indicating a larger nanosorbent surface affinity for the organic matter that is able to diffuse through the silica pores as probed by the intraparticle diffusion model. In addition, we found an good reusability (100% recovering after 4 sorption/desorption cycles for methyl orange removal), which makes of this magnetic nanosorbent suitable for remediation technologies., This research was funded by the Spanish Ministry of Economy and Competitiveness under grants MAT2017-88148-R, PIE-201760E007, MAT2016-80394-R, PGC2018-095642-B-I00 and Juan de la Cierva Formación FJCI-2015-23702
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New insights into the structural analysis of maghemite and (MFe2O4, M = Co, Zn) ferrite nanoparticles synthesized by a microwave-assisted polyol process

  • Gallo-Cordova, Álvaro
  • Espinosa, Ana
  • Serrano Rubio, Aída
  • Gutiérrez, Lucía
  • Menéndez, Nieves
  • Morales, María Del Puerto
  • Mazarío, Eva
[EN] The search for more efficient, scalable, reproducible and standardized synthesis methods able to control particle size and crystallinity is still a challenge in nanotechnology. The one-pot microwave-assisted polyol process has been optimized for the synthesis of well-defined ferrite nanoparticles. Highly uniform and crystalline γ-Fe2O3, CoFe2O4 and ZnFe2O4 nanoparticles, with diameters below 14 nm have been prepared by an easy and reproducible one-pot microwave-assisted heating procedure in a polyol medium. A pure single phase and cubic spinel structure were confirmed by powder X-ray diffraction and Raman spectroscopy. Depending on the metal precursors, nanoparticles display magnetic features from superparamagnetic behaviour (Fe- A nd Zn-ferrites) to ferrimagnetism (Co ferrite) at room temperature. The iron oxidation state of 3+ and its short-range order coordination were studied by XAS (X-ray absorption spectroscopy). External field Mössbauer spectra, recorded at low temperature, confirmed the ferrimagnetic order with a Fe3+ and M2+ partial cationic distribution within both the A and B sites in zinc and cobalt ferrite, respectively. According to these results, the ferrite stoichiometry was (Zn0.70Fe0.30)[Zn0.30Fe1.70]O4 and (Co0.28Fe0.72)[Co0.72Fe1.28]O4. This journal is, This research was funded by the Spanish Ministry of Economy and Competitiveness under grants MAT2017-88148-R, MAT2017-86540-C4-1-R, RTI2018-095303-A-C52, and PGC2018-095642-B-I00. E. M. acknowledges financial support from the Juan de la Cierva Formación (FJCI-2015-23702) and to Comunidad de Madrid – Jóvenes Doctores project (SI1-PJI-2019-00366). L. G. acknowledges financial support from the Ramón y Cajal program (RYC-2014-15512). The authors would like to acknowledge the use of the Advanced Microscopy Laboratory (INA-Universidad de Zaragoza). A. S. and A. E. acknowledge financial support from the Comunidad de Madrid for the ‘‘Atracción de Talento Investigador’’ contracts (No. 2017-T2/IND5395 and 2018-T1/IND10058). A. E. is also grateful to the 2018/NMT-4321 and SEV-2016-0686 projects. The European Synchrotron (ESRF),Ministerio Español de Ciencia, Innovación y Universidades (MCIU) and Consejo Superior de Investigaciones Cientificas (CSIC) are acknowledged for the provision of synchrotron radiation facilities. We also thank the BM25- SpLine staff for the technical support beyond their duties.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Superparamagnetic nanoreactors: Heterogeneous catalyst for oxidative degradation of organic pollutants by fenton-like reaction

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Smartphone-Based Colorimetric Method to Quantify Iron Concentration and to Determine the Nanoparticle Size from Suspensions of Magnetic Nanoparticles

  • Fernández-Afonso, Yilian
  • Salas, Gorka
  • Fernández-Barahona, Irene
  • Herranz, Fernando
  • Grüttner, Cordula
  • Fuente, Jesús M. de la
  • Morales, María Del Puerto
  • Gutiérrez, Lucía
Advanced uses of smartphones are changing lifestyles, and may have a great impact in materials science in the near future. In this work, the use of these devices to develop fast, simple, and cheap methods to characterize magnetic nanoparticle suspensions is tested. A series of dilutions of a wide library of magnetic nanoparticles, composed of iron oxide materials in the range between 3 and 43 nm, with two different shapes and four different coatings is prepared. The colloid color is analyzed using the RGB (red, green, blue) color model. Ratios of these parameters are correlated with the suspension iron concentration and with the nanoparticles average size. A linear relationship between the color (in particular the G/R ratio) and both the colloid iron content and the particles size is found. The link between these parameters allows the development of two new methods to determine either the con- centration or the particle size of magnetic nanoparticle suspensions just by acquiring images from suspensions of iron oxide magnetic nanoparticles with a smartphone., This work was funded by European Commission (project NoCanTher, H2020, GA 685795), Spanish MINECO (SAF2016-79593-P to F.H., MAT2017-88148R (AEI/FEDER, UE) to M.P.M., MAT2015-71806-R to G.S. and PGC2018-096016-B-I00 to L.G.), and Fondo Social de la DGA (grupos DGA). Support from the Nanocare Network (RED2018-102469-T financed by the Spanish MCIU) is also acknowledged. Y.F-A. thanks Santander- Universidad Zaragoza Fellowship program for her Ph.D. position. L.G. acknowledges financial support from the Ramón y Cajal program (RYC- 2014-15512). G.S. acknowledges technical support from Dr. Leonor de la Cueva and Rebeca Amaro. Authors would like to acknowledge the use the Advanced Microscopy Laboratory (INA-Universidad de Zaragoza).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Improving degradation of real wastewaters with self-heating magnetic nanocatalysts

  • Gallo-Cordova, Álvaro
  • Castro, Juan J.
  • Winkler, Elin L.
  • Lima, Enio
  • Zysler, Roberto D.
  • Morales, María Del Puerto
  • Ovejero, Jesús G.
  • Almeida Streitwieser, Daniela
[EN] Industrial effluents contain a wide range of organic pollutants that present harmful effects on the environment and deprived communities with no access to clean water. As this organic matter is resistant to conventional treatments, Advanced Oxidation Processes (AOPs) have emerged as a suitable option to counteract these envi-ronmental challenges. Engineered iron oxide nanoparticles have been widely tested in AOPs catalysis, but their full potential as magnetic induction self-heating catalysts has not been studied yet on real and highly contam-inated industrial wastewaters. In this study we have designed a self-heating catalyst with a finely tuned structure of small cores (10 nm) aggregates to develop multicore particles (40 nm) with high magnetic moment and high colloidal stability. This nanocatalyst, that can be separated by magnetic harvesting, is able to increase reaction temperatures (up to 90 ◦C at 1 mg/mL suspension in 5 min) under the action of alternating magnetic fields. This efficient heating was tested in the degradation of a model compound (methyl orange) and real wastewaters, such as leachate from a solid landfill (LIX) and colored wastewater from a textile industry (TIW). It was possible to increase reaction rates leading to a reduction of the chemical oxygen demand of 50 and 90%, for TIW and LIX. These high removal and degradation ability of the magnetic nanocatalyst was sustained with the formation of strong reactive oxygen species by a Fenton-like mechanism as proved by electron paramagnetic resonance. These findings represent an important advance for the industrial implementation of a scalable, non-toxic, self-heating catalysts that can certainly enhance AOP for wastewater treatment in a more sustainable and efficient way., This research was funded by the Spanish Ministry of Economy and Competitiveness under grant MAT2017-88148-R (AEI/FEDER, UE) and Consejo Superior de Invetigaciones Científícas PIE- 201960E062. This study was also supported by the USFQ Collaboration Grant 2018 Nº 11197 and the USFQ PoliGrants 2018–2019 Nº 12501. E.W., E.L.Jr and R.D.Z. acknowledge Argentine governmental agency ANPCyT (Project No. PICT-2016-0288 and PICT-2018-02565) and UNCuyo (Project No.06/ C527 and 06/C528) for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mixing iron oxide nanoparticles with different shape and size for tunable magneto-heating performance

  • Ovejero, Jesús G.
  • Spizzo, Federico
  • Morales, María Del Puerto
  • Bianco, L. Del
[EN] Tuning the magnetic properties of nanoparticles is a strategic goal to use them in the most effective way to perform specific functions in the nanomedicine field. We report a systematic study carried out on a set of samples obtained by mixing together iron oxide nanoparticles with different shape: elongated with aspect ratio ~5.2 and mean volume of the order of 103 nm3 (excluding the silica coating) and spherical with mean volume one order of magnitude larger. These structural features of the nanoparticles together with their aggregation state determine the magnetic anisotropy and the magnetic relaxation processes. In particular, the spherical nanoparticles turn out to be more stable against superparamagnetic relaxation. Mixing the nanoparticles in different proportions allows to modulate the magnetic response of the samples. The two populations of nanoparticles magnetically influence each other through a mean field mechanism, which depends crucially on temperature and rules the hysteretic magnetic properties and their thermal evolution. This magnetic phenomenology has a direct impact on the ability of the mixed samples to generate heat under an alternating magnetic field, a key function in view of nanomedicine applications. Under proper testing conditions, the heating efficiency of the mixed samples is larger compared to that obtained as the sum of those of the parent nanoparticles. This occurs thanks to the mean field produced by the magnetically blocked spherical nanoparticles that stabilizes the thermally fluctuating moments of the elongated ones, which therefore contribute more effectively to the heat production. This journal is, the Spanish Ministry of Economy and Competitiveness under grant MAT2017-88148-R (AEI/FEDER, UE), PIE-201960E062 project and from the EU project H2020-FETOPEN-RIA 829162, HOTZYMES.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How size, shape and assembly of magnetic nanoparticles give rise to different hyperthermia scenarios

  • Gavilán, Helena
  • Simeonidis, Konstantinos
  • Myrovali, Eirini
  • Mazarío, Eva
  • Chubykalo-Fesenko, Oksana
  • Chantrell, Roy W.
  • Balcells, Lluis
  • Angelakeris, Mavroidis
  • Morales, María Del Puerto
  • Serantes, David
The use of magnetic nanoparticles (MNPs) to locally increase the temperature at the nanoscale under the remote application of alternating magnetic fields (magnetic particle hyperthermia, MHT) has become an important subject of nanomedicine multidisciplinary research, focusing among other topics on the optimization of the heating performance of MNPs and their assemblies under the effect of the magnetic field. We report experimental data of heat released by MNPs using a wide range of anisometric shapes and their assemblies in different media. We outline a basic theoretical investigation, which assists the interpretation of the experimental data, including the effect of the size, shape and assembly of MNPs on the MNPs’ hysteresis loops and the maximum heat delivered. We report heat release data of anisometric MNPs, including nanodisks, spindles (elongated nanoparticles) and nanocubes, analysing, for a given shape, the size dependence. We study the MNPs either acting as individuals or assembled through a magnetic-field-assisted method. Thus, the physical geometrical arrangement of these anisometric particles, the magnetization switching and the heat release (by means of the determination of the specific adsorption rate, SAR values) under the application of AC fields have been analysed and compared in aqueous suspensions and after immobilization in agar matrix mimicking the tumour environment. The different nano-systems were analysed when dispersed at random or in assembled configurations. We report a systematic fall in the SAR for all anisometric MNPs randomly embedded in a viscous environment. However, certain anisometric shapes will have a less marked, an almost total preservation or even an increase in SAR when embedded in a viscous environment with certain orientation, in contrast to the measurements in water solution. Discrepancies between theoretical and experimental values reflect the complexity of the systems due to the interplay of different factors such as size, shape and nanoparticle assembly due to magnetic interactions. We demonstrate that magnetic assembly holds great potential for producing materials with high functional and structural diversity, as we transform our nanoscale building blocks (anisometric MNPs) into a material displaying enhanced SAR properties., K. S. acknowledges Stavros Niarchos Foundation for financial support. SQUID measurements received funding from the EU-H2020 research and innovation program under grant agreement no 654360 having benefitted from the access provided by CSIC-ICMAB in Barcelona within the framework of the NFFA-Europe Transnational Access Activity. This work was also partially supported by grants from the MINEICO (MAT2017-88148R to M. P. Morales; Severo Ochoa Program (CEX2019-000917-S), RTI2018-099960-B-I00 to Ll. Balcells), the Spanish Agencia Estatal de Investigación (PID2019-109514RJ-100 to D. Serantes) and from the EU, H2020 program through HOTZYME-829162 project. E. M. acknowledges financial support from the Madrid Government (Comunidad de Madrid-Spain) under the Multiannual Agreement with Universidad Autónoma de Madrid in the line of action encouraging youth research doctors, in the context of the V PRICIT (Regional Programme of Research and Technological Innovation, SI1-PJI-2019-00366)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective magnetic nanoheating: Combining iron oxide nanoparticles for multi-hot-spot induction and sequential regulation

  • Ovejero, Jesús G.
  • Armenia, Ilaria
  • Serantes, David
  • Veintemillas-Verdaguer, S.
  • Zeballos, Nicoll
  • López-Gallego, Fernando
  • Grüttner, Cordula
  • Fuente, Jesús M. de la
  • Morales, María Del Puerto
  • Grazú, Valeria
The contactless heating capacity of magnetic nanoparticles (MNPs) has been exploited in fields such as hyperthermia cancer therapy, catalysis, and enzymatic thermal regulation. Herein, we propose an advanced technology to generate multiple local temperatures in a single-pot reactor by exploiting the unique nanoheating features of iron oxide MNPs exposed to alternating magnetic fields (AMFs). The heating power of the MNPs depends on their magnetic features but also on the intensity and frequency conditions of the AMF. Using a mixture of diluted colloids of MNPs we were able to generate a multi-hot-spot reactor in which each population of MNPs can be selectively activated by adjusting the AMF conditions. The maximum temperature reached at the surface of each MNP was registered using independent fluorescent thermometers that mimic the molecular link between enzymes and MNPs. This technology paves the path for the implementation of a selective regulation of multienzymatic reactions., This work was funded by the European Commission through the HOTZYMES Project (H2020-FETOPEN-RIA 829162), the Spanish Ministry of Economy and Competitiveness under Grant No. MAT2017-88148-R (AEI/FEDER, UE) and the PIE-201960E062 project, AEI (BIO2017-84246-C2-1-R project to V.G. and J.M.F., and PID2019-109514RJ-100 to D.S.), Nanotechnology in translational hyperthermia (HIPERNANO) - RED2018-102626-T, and Fondo Social de la DGA (grupos DGA)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Whither magnetic hyperthermia? A tentative roadmap

  • Rubia-Rodríguez, Irene
  • Santana-Otero, Antonio
  • Spassov, Simo
  • Tombácz, Etelka
  • Johansson, Christer
  • Presa, Patricia de la
  • Teran, Francisco J.
  • Morales, María Del Puerto
  • Veintemillas-Verdaguer, S.
  • Thanh, Nguyen Thi Kim
  • Besenhard, Maximilian O.
  • Wilhelm, Claire
  • Gazeau, Florence
  • Harmer, Quentin
  • Mayes, Eric
  • Manshian, Bella B.
  • Soenen, Stefaan J.
  • Gu, Yuanyu
  • Millán, Ángel
  • Efthimiadou, Eleni K.
  • Gaudet, Jeff
  • Goodwill, Patrick
  • Mansfield, James
  • Steinhoff, Uwe
  • Wells, James
  • Wiekhorst, Frank
  • Ortega, Daniel
This article belongs to the Special Issue Magnetic Nanoparticles as High-Frequency Nano-Heater., The scientific community has made great efforts in advancing magnetic hyperthermia for the last two decades after going through a sizeable research lapse from its establishment. All the progress made in various topics ranging from nanoparticle synthesis to biocompatibilization and in vivo testing have been seeking to push the forefront towards some new clinical trials. As many, they did not go at the expected pace. Today, fruitful international cooperation and the wisdom gain after a careful analysis of the lessons learned from seminal clinical trials allow us to have a future with better guarantees for a more definitive takeoff of this genuine nanotherapy against cancer. Deliberately giving prominence to a number of critical aspects, this opinion review offers a blend of state-of-the-art hints and glimpses into the future of the therapy, considering the expected evolution of science and technology behind magnetic hyperthermia., This work was supported by the NoCanTher project, which has received funding from the European Union’s Horizon 2020 research and innovation program under grant agreement No 685795. The authors acknowledge support from the COST Association through the COST actions “RADIOMAG” (TD1402) and “MyWAVE” (CA17115). D.O., A.S.-O. and I.R.-R. acknowledge financial support from the Community of Madrid under Contracts No. PEJD-2017-PRE/IND-3663 and PEJ-2018-AI/IND-11069, from the Spanish Ministry of Science through the Ramón y Cajal grant RYC2018-025253-I and Research Networks RED2018-102626-T, as well as the Ministry of Economy and Competitiveness through the grants MAT2017-85617-R, MAT2017-88148R and the “Severo Ochoa” Program for Centers of Excellence in R&D (SEV-2016-0686). M.B. and N.T.K.T. would like to thank EPSRC for funding (grant EP/K038656/1 and EP/M015157/1) and AOARD (FA2386-17-1-4042) award. This work was additionally supported by the EMPIR program co-financed by the Participating States and from the European Union’s Horizon 2020 research and innovation program, grant no. 16NRM04 “MagNaStand”. The work was further supported by the DFG grant CRC “Matrix in Vision” (SFB 1340/1 2018, no 372486779, project A02)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tunable control of the structural features and related physical properties of MnxFe3- xO4 nanoparticles: Implication on their heating performance by magnetic hyperthermia

  • Del Sol-Fernández, Susel
  • Odio, Oscar F.
  • Crespo, Paula M.
  • Obed Pérez, E.
  • Salas, Gorka
  • Gutiérrez, Lucía
  • Morales, María Del Puerto
  • Reguera, Edilso
Four different manganese ferrite (MnxFe3–xO4) nanostructures (9 and 15 nm spheres (S1, S2), 18 nm nanoflowers (NFs), and 20 nm cubes (NC)) were prepared in this work through a thermal decomposition method by tuning the critical synthetic parameters. In all of the prepared materials, the cation composition of the ferrite phase was rather similar. The occurrence of a secondary phase of mangano-wüstite within MnxFe3–xO4 nanoparticles and its impact on the magnetic properties were studied in detail from static and dynamic magnetic measurements complemented with Mössbauer spectroscopy, X-ray diffraction, high-resolution transmission electron microscopy (HRTEM) analysis, and X-ray photoelectron spectroscopy (XPS). All of the computed data were consistent with a deterioration of the magnetic output as the reduced phase becomes progressively important, leading to a marked spin disorder and the reduction of either the effective magnetic size or the saturation magnetization. The heating efficiency was measured from 100 up to 300 kHz and from 8 up to 24 kA/m, the NF sample being the one displaying the highest specific absorption rate (SAR) under all tested conditions. These results agreed with the physicochemical and magnetic characterization of the particles, highlighting the interest of the detailed characterization of the particles to understand their heating properties relevant for biomedical applications and others such as catalysis., S.D.S.F. acknowledges the economic support by CONACyT and Instituto Politécnico Nacional SIP 20180252 (México). The authors thank the Laboratorio Nacional de Conversión y Almacenamiento de Energía (LNCAE) for access to its experimental facility. This research was partially funded by the Spanish Ministry of Economy and Competitiveness under grant MAT2017-88148-R (AEI/FEDER, UE) and by the Spanish Ministry of Science, Innovation and Universities (MCIU) through projects PGC2018-096016-B-I00 (MCIU/AEI/FEDER to L.G.) and PID2019-106301RB-I00 (G.S.)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Cu-Doped Extremely Small Iron Oxide Nanoparticles with Large Longitudinal Relaxivity: One-Pot Synthesis and in Vivo Targeted Molecular Imaging

  • Fernández-Barahona, I.
  • Gutiérrez, L.
  • Veintemillas-Verdaguer, S.
  • Pellico, J.
  • Morales, M.D.P.
  • Catala, M.
  • Del Pozo, M.A.
  • Ruiz-Cabello, J.
  • Herranz, F.
Synthesizing iron oxide nanoparticles for positive contrast in magnetic resonance imaging is the most promising approach to bring this nanomaterial back to the clinical field. The success of this approach depends on several aspects: the longitudinal relaxivity values, the complexity of the synthetic protocol, and the reproducibility of the synthesis. Here, we show our latest results on this goal. We have studied the effect of Cu doping on the physicochemical, magnetic, and relaxometric properties of iron oxide nanoparticles designed to provide positive contrast in magnetic resonance imaging. We have used a one-step, 10 min synthesis to produce nanoparticles with excellent colloidal stability. We have synthesized three different Cu-doped iron oxide nanoparticles showing modest to very large longitudinal relaxivity values. Finally, we have demonstrated the in vivo use of these kinds of nanoparticles both in angiography and targeted molecular imaging.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Design strategies for shape-controlled magnetic iron oxide nanoparticles

  • Roca, A.G.
  • Gutiérrez, L.
  • Gavilán, H.
  • Fortes Brollo, M.E.
  • Veintemillas-Verdaguer, S.
  • Morales, M.D.P.
Ferrimagnetic iron oxide nanoparticles (magnetite or maghemite) have been the subject of an intense research, not only for fundamental research but also for their potentiality in a widespread number of practical applications. Most of these studies were focused on nanoparticles with spherical morphology but recently there is an emerging interest on anisometric nanoparticles. This review is focused on the synthesis routes for the production of uniform anisometric magnetite/maghemite nanoparticles with different morphologies like cubes, rods, disks, flowers and many others, such as hollow spheres, worms, stars or tetrapods. We critically analyzed those procedures, detected the key parameters governing the production of these nanoparticles with particular emphasis in the role of the ligands in the final nanoparticle morphology. The main structural and magnetic features as well as the nanotoxicity as a function of the nanoparticle morphology are also described. Finally, the impact of each morphology on the different biomedical applications (hyperthermia, magnetic resonance imaging and drug delivery) are analysed in detail. We would like to dedicate this work to Professor Carlos J. Serna, Instituto de Ciencia de Materiales de Madrid, ICMM/CSIC, for his outstanding contribution in the field of monodispersed colloids and iron oxide nanoparticles. We would like to express our gratitude for all these years of support and inspiration on the occasion of his retirement.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Aggregation effects on the magnetic properties of iron oxide colloids

  • Gutiérrez, L.
  • de la Cueva, L.
  • Moros, M.
  • Mazarío, E.
  • de Bernardo, S.
  • de la Fuente, J.M.
  • Morales, M.P.
  • Salas, G.
Magnetic nanoparticles (MNPs), and in particular iron oxide nanoparticles (mainly magnetite and maghemite), are being widely used in the form of aqueous colloids for biomedical applications. In such colloids, nanoparticles tend to form assemblies, either aggregates, if the union is permanent, or agglomerates, if it is reversible. These clustering processes have a strong impact on the MNPs'' properties that are often not well understood. In this review, the causes and consequences of MNPs aggregation/agglomeration are reviewed and discussed. Special attention has been paid to the impact of the MNPs aggregation/agglomeration on their magnetic properties and heating properties, when exposed to an alternating magnetic field in the frame of magnetic hyperthermia. In addition, a model system with MNPs of two different sizes coated with three different molecules oleic acid, meso-2, 3-dimercaptosuccinic acid and poly(maleic anhydride-alt-1-octadecene) has been characterized and the results used to support the ideas reviewed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Understanding the Influence of a Bifunctional Polyethylene Glycol Derivative in Protein Corona Formation around Iron Oxide Nanoparticles

  • Ruiz, A.
  • Alpizar, A.
  • Beola, L.
  • Rubio, C.
  • Gavilan, H.
  • Marciello, M.
  • Rodriguez-Ramiro, I.
  • Ciordia, S.
  • Morris, C.J.
  • Morales, M.D.
Superparamagnetic iron oxide nanoparticles are one of the most prominent agents used in theranostic applications, with MRI imaging the main application assessed. The biomolecular interface formed on the surface of a nanoparticle in a biological medium determines its behaviour in vitro and in vivo. In this study, we have compared the formation of the protein corona on highly monodisperse iron oxide nanoparticles with two different coatings, dimercaptosuccinic acid (DMSA), and after conjugation, with a bifunctional polyethylene glycol (PEG)-derived molecule (2000 Da) in the presence of Wistar rat plasma. The protein fingerprints around the nanoparticles were analysed in an extensive proteomic study. The results presented in this work indicate that the composition of the protein corona is very difficult to predict. Proteins from different functional categories cell components, lipoproteins, complement, coagulation, immunoglobulins, enzymes and transport proteins were identified in all samples with very small variability. Although both types of nanoparticles have similar amounts of bonded proteins, very slight differences in the composition of the corona might explain the variation observed in the uptake and biotransformation of these nanoparticles in Caco-2 and RAW 264.7 cells. Cytotoxicity was also studied using a standard 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide assay. Controlling nanoparticles' reactivity to the biological environment by deciding on its surface functionalization may suggest new routes in the control of the biodistribution, biodegradation and clearance of multifunctional nanomedicines.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Smartphone-based colorimetric method to quantify iron concentration and to determine the nanoparticle size from suspensions of magnetic nanoparticles

  • Fernández-Afonso, Y.
  • Salas, G.
  • Fernández-Barahona, I.
  • Herranz, F.
  • Grüttner, C.
  • Martínez de la Fuente, J.
  • del Puerto Morales, M.
  • Gutiérrez, L.
Advanced uses of smartphones are changing lifestyles, and may have a great impact in materials science in the near future. In this work, the use of these devices to develop fast, simple, and cheap methods to characterize magnetic nanoparticle suspensions is tested. A series of dilutions of a wide library of magnetic nanoparticles, composed of iron oxide materials in the range between 3 and 43 nm, with two different shapes and four different coatings is prepared. The colloid color is analyzed using the RGB (red, green, blue) color model. Ratios of these parameters are correlated with the suspension iron concentration and with the nanoparticles average size. A linear relationship between the color (in particular the G/R ratio) and both the colloid iron content and the particles size is found. The link between these parameters allows the development of two new methods to determine either the concentration or the particle size of magnetic nanoparticle suspensions just by acquiring images from suspensions of iron oxide magnetic nanoparticles with a smartphone.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Selective Magnetic Nanoheating: Combining Iron Oxide Nanoparticles for Multi-Hot-Spot Induction and Sequential Regulation

  • Ovejero J.G.
  • Armenia I.
  • Serantes D.
  • Veintemillas-Verdaguer S.
  • Zeballos N.
  • López-Gallego F.
  • Grüttner C.
  • De La Fuente J.M.
  • Puerto Morales M.D.
  • Grazu V.
The contactless heating capacity of magnetic nanoparticles (MNPs) has been exploited in fields such as hyperthermia cancer therapy, catalysis, and enzymatic thermal regulation. Herein, we propose an advanced technology to generate multiple local temperatures in a single-pot reactor by exploiting the unique nanoheating features of iron oxide MNPs exposed to alternating magnetic fields (AMFs). The heating power of the MNPs depends on their magnetic features but also on the intensity and frequency conditions of the AMF. Using a mixture of diluted colloids of MNPs we were able to generate a multi-hot-spot reactor in which each population of MNPs can be selectively activated by adjusting the AMF conditions. The maximum temperature reached at the surface of each MNP was registered using independent fluorescent thermometers that mimic the molecular link between enzymes and MNPs. This technology paves the path for the implementation of a selective regulation of multienzymatic reactions.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Design strategies for shape-controlled magnetic iron oxide nanoparticles

  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Gutiérrez, Lucía|||0000-0003-2366-3598
  • Gavilán, Helena
  • Fortes Brollo, Maria Eugênia
  • Veintemillas Verdaguer, Sabino
  • Morales, María del Puerto|||0000-0002-7290-7029
Ferrimagnetic iron oxide nanoparticles (magnetite or maghemite) have been the subject of an intense research, not only for fundamental research but also for their potentiality in a widespread number of practical applications. Most of these studies were focused on nanoparticles with spherical morphology but recently there is an emerging interest on anisometric nanoparticles. This review is focused on the synthesis routes for the production of uniform anisometric magnetite/maghemite nanoparticles with different morphologies like cubes, rods, disks, flowers and many others, such as hollow spheres, worms, stars or tetrapods. We critically analyzed those procedures, detected the key parameters governing the production of these nanoparticles with particular emphasis in the role of the ligands in the final nanoparticle morphology. The main structural and magnetic features as well as the nanotoxicity as a function of the nanoparticle morphology are also described. Finally, the impact of each morphology on the different biomedical applications (hyperthermia, magnetic resonance imaging and drug delivery) are analysed in detail. We would like to dedicate this work to Professor Carlos J. Serna, Instituto de Ciencia de Materiales de Madrid, ICMM/CSIC, for his outstanding contribution in the field of monodispersed colloids and iron oxide nanoparticles. We would like to express our gratitude for all these years of support and inspiration on the occasion of his retirement.