Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 36
Encontrada(s) 1 página(s)

UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

Colloidal flower-shaped iron oxide nanoparticles: Synthesis strategies and Coatings

  • Gavilán, Helena
  • Kowalski, Anja
  • Heinke, David
  • Sugunan, Abhilash
  • Sommertune, Jens
  • Varón, Miriam
  • Bogart, Lara K
  • Posth, Oliver
  • Zeng, Lunjie
  • González Alonso, David|||0000-0002-2871-6479
  • Balceris, Christoph
  • Fock, Jeppe
  • Wetterskog, Erik
  • Frandsen, Cathrine
  • Gehrke, Nicole
  • Grüttner, Cordula
  • Fornara, Andrea
  • Ludwig, Frank
  • Veintemillas Verdaguer, Sabino
  • Johansson, Christer
The assembly of magnetic cores into regular structures may notably influence the properties displayed by a magnetic colloid. Here, key synthesis parameters driving the self-assembly process capable of organizing colloidal magnetic cores into highly regular and reproducible multi-core nanoparticles are determined. In addition, a self-consistent picture that explains the collective magnetic properties exhibited by these complex assemblies is achieved through structural, colloidal, and magnetic means. For this purpose, different strategies to obtain flower-shaped iron oxide assemblies in the size range 25?100 nm are examined. The routes are based on the partial oxidation of Fe(OH)2, polyol-mediated synthesis or the reduction of iron acetylacetonate. The nanoparticles are functionalized either with dextran, citric acid, or alternatively embedded in polystyrene and their long-term stability is assessed. The core size is measured, calculated, and modeled using both structural and magnetic means, while the Debye model and multi-core extended model are used to study interparticle interactions. This is the first step toward standardized protocols of synthesis and characterization of flower-shaped nanoparticles., This work was partially supported by the European Commission Framework Program 7 (NanoMag project, NO 604448) and by the Spanish Ministry of Economy and Competitiveness (Mago project, N◦ MAT2014-52069-R).
Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Anisotropic magnetic nanoparticles for biomedicine: bridging frequency separated AC-field controlled domains of actuation

  • Serantes Abalo, David
  • Chantrell, Roy W.
  • Gavilán, Helena
  • Puerto Morales, María del
  • Chubykalo-Fesenko, Oksana
  • Baldomir Fernández, Daniel
  • Satoh, Akira
Magnetic nanoparticles (MNPs) constitute promising nanomedicine tools based on the possibility of obtaining different actuations (for example, heating or mechanical response) triggered by safe remote stimuli. Particularly, the possibility of performing different tasks using the same entity constitutes a main research target towards optimizing the treatment. But such a goal represents, in general, a very difficult step because the requisites for achieving efficient responses for separate actuations are often disparate – if not completely incompatible. An example of this is the response of MNPs to external AC fields, which could in principle be exploited for either magneto-mechanical actuation (MMA) at low frequencies (tens of Hz); or heat release at high frequency (0.1–1 MHz range) for magnetic fluid hyperthermia (MFH). The problem is that efficient MMA involves large torque, the required material parameters for which are detrimental to high heating, thus hindering the possibility of effective alternation between both responses. To overcome such apparent incompatibility, we propose a simple approach based on the use of anisotropic MNPs. The key idea is that the AC-frequency change must be concurrent with a field-amplitude variation able to promote – or impede – the reversal over the shape-determined anisotropy energy barrier. This way it is possible to switch the particle response between an efficient (magnetically dissipationless) rotation regime at low-f, for MMA, and a “frozen” (non-rotatable) high-energy-dissipation regime at high-f, for MFH. Furthermore, we show that such an alternation can also be achieved within the same high-f MFH regime. We use combined Brownian dynamics and micromagnetic simulations, based on real experimental samples, to show how such a field threshold can be tuned to working conditions with hexagonal-disk shape anisotropy
Addi. Archivo Digital para la Docencia y la Investigación
Publicación Artículo científico (JournalArticle)

Probing the Stability and Magnetic Properties of Magnetosome Chains in Freeze-Dried Magnetotactic Bacteria

  • Bender, Philipp
  • Marcano Prieto, Lourdes
  • Orue Goikuria, Iñaki
  • Alba Venero, Diego
  • Honecker, Dirk
  • Fernández Barquín, Luis
  • Muela Blázquez, Alicia
  • Fernández Gubieda Ruiz, María Luisa
Magnetospirillum gryphiswaldense biosynthesize high-quality magnetite nanoparticles, called magnetosomes, and arrange them into a chain that behaves like a magnetic compass. Here we perform magnetometry and polarized small-angle neutron scattering (SANS) experiments on a powder of freeze-dried and immobilized M. gryphiswaldense. We confirm that the individual magnetosomes are single-domain nanoparticles and that an alignment of the particle moments along the magnetic field direction occurs exclusively by an internal, coherent rotation. Our magnetometry results of the bacteria powder indicate an absence of dipolar interactions between the particle chains and a dominant uniaxial magnetic anisotropy. Finally, we can verify by SANS that the chain structure within the immobilized, freeze-dried bacteria is preserved also after application of large magnetic fields up to 1 T., Bender acknowledges financial support from the National Research Fund of Luxembourg (CORE SANS4NCC grant) and L. Marcano acknowledges the Basque Government for her fellowship (POS_2018_1_0070). This project has received additional funding from the European Commission Framework Programme 7 under grant agreement no 604448 (NanoMag), and the Spanish Government is acknowledged for funding under project MAT2017-83631-C3-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Classification of magnetic nanoparticle systems—synthesis, standardization and analysis methods in the nanomag project

  • Bogren, Sara
  • Fornara, Andrea
  • Ludwing, Frank
  • Morales, María Del Puerto
  • Steinhoff, Uwe
  • Fougt-Hansen, Mikkel
  • Kazakova, Olga
  • Johansson, Christer
This article belongs to the Special Issue "Magnetic Nanoparticles 2015".-- This is an open access article distributed under the Creative Commons Attribution License (CC BY)., This study presents classification of different magnetic single- and multi-core particle systems using their measured dynamic magnetic properties together with their nanocrystal and particle sizes. The dynamic magnetic properties are measured with AC (dynamical) susceptometry and magnetorelaxometry and the size parameters are determined from electron microscopy and dynamic light scattering. Using these methods, we also show that the nanocrystal size and particle morphology determines the dynamic magnetic properties for both single- and multi-core particles. The presented results are obtained from the four year EU NMP FP7 project, NanoMag, which is focused on standardization of analysis methods for magnetic nanoparticles., This project has received funding from the European Commission Framework Programme 7 under grant agreement no 604448. We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis methods to prepare single- and multi-core iron oxide nanoparticles for biomedical applications

  • Gutiérrez, Lucía
  • Costo, Rocío
  • Morales, María Del Puerto
Gutiérrez, Lucía et al., We review current synthetic routes to magnetic iron oxide nanoparticles for biomedical applications. We classify the different approaches used depending on their ability to generate magnetic particles that are either single-core (containing only one magnetic core, i.e. a single domain nanocrystal) or multi-core (containing several magnetic cores, i.e. single domain nanocrystals). The synthesis of single-core magnetic nanoparticles requires the use of surfactants during the particle generation, and careful control of the particle coating to prevent aggregation. Special attention has to be paid to avoid the presence of any toxic reagents after the synthesis if biomedical applications are intended. Several approaches exist to obtain multi-core particles based on the coating of particle aggregates; nevertheless, the production of multi-core particles with good control of the number of magnetic cores per particle, and of the degree of polydispersity of the core sizes, is still a difficult task. The control of the structure of the particles is of great relevance for biomedical applications as it has a major influence on the magnetic properties of the materials., This work was supported by the European Commission Framework Programme 7 under grant agreement no [604448], Nanomag project. LG is the beneficiary of a post-doctoral grant from the AXA Research Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of Nanoclustering and Dipolar Interactions in Heat Generation for Magnetic Hyperthermia

  • Coral, Diego Fernando
  • Mendoza Zélis, Pedro
  • Marciello, Marzia
  • Morales, María Del Puerto
  • Craievich, Aldo
  • Sánchez, Francisco H.
  • Fernández van Raap, Marcela B.
Biomedical magnetic colloids commonly used in magnetic hyperthermia experiments often display a bidisperse structure, i.e., are composed of stable nanoclusters coexisting with well-dispersed nanoparticles. However, the influence of nanoclusters in the optimization of colloids for heat dissipation is usually excluded. In this work, bidisperse colloids are used to analyze the effect of nanoclustering and long-range magnetic dipolar interaction on the magnetic hyperthermia efficiency. Two kinds of colloids, composed of magnetite cores with mean sizes of around 10 and 18 nm, coated with oleic acid and dispersed in hexane, and coated with meso-2,3-dimercaptosuccinic acid and dispersed in water, were analyzed. Small-angle X-ray scattering was applied to thoroughly characterize nanoparticle structuring. We proved that the magnetic hyperthermia performances of nanoclusters and single nanoparticles are distinctive. Nanoclustering acts to reduce the specific heating efficiency whereas a peak against concentration appears for the well-dispersed component. Our experiments show that the heating efficiency of a magnetic colloid can increase or decrease when dipolar interactions increase and that the colloid concentration, i.e., dipolar interaction, can be used to improve magnetic hyperthermia. We have proven that the power dissipated by an ensemble of dispersed magnetic nanoparticles becomes a nonextensive property as a direct consequence of the long-range nature of dipolar interactions. This knowledge is a key point in selecting the correct dose that has to be injected to achieve the desired outcome in intracellular magnetic hyperthermia therapy., We acknowledge CONICET and UNLP of Argentina for financial support with grants PIP 0720 and X11/680 and the European Union for Multifun (EU-FP ref 262943) and NanoMag (EU-FP7 ref 60448) projects and MAT2014-52069-R from the Spanish Ministry of Economy and Competitiveness., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

How shape and internal structure affect the magnetic properties of anisometric magnetite nanoparticles

  • Gavilán, Helena
  • Posth, Oliver
  • Bogart, Lara K.
  • Steinhoff, Uwe
  • Gutiérrez, Lucía
  • Morales, María Del Puerto
A three-step aqueous approach to obtain large (>50 nm) magnetite single-core particles has been developed. The steps are a) synthesis of antiferromagnetic nanoparticles, b) particle coating and c) subsequent reduction of the core material to magnetite. By variation of precursor material and process conditions, the synthesis yielded rhombohedra, discs or needles below 200 nm. A combination of X-ray diffraction, 57Fe Mössbauer spectroscopy and infrared spectroscopy confirmed magnetite to be the dominant final core material. From transmission electron microscopy, we identified porous structures after the reduction. Magnetic characterization of the different magnetic nanopaticles revealed strikingly different magnetic behaviour depending on their shape, internal structure and reduction process. We conclude that each of these parameters have to be considered in further characterization of large magnetite nanoparticles., This work was supported by the EC FP-7 grant “NanoMag” (grant agreement no 604448) and the Spanish Government by MAGO project (MAT2014-52069-R). The magnetic characterization was supported by COST Action TD1402. LG acknowledges financial support from the Ramón y Cajal subprogram (RYC-2014-15512)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In-situ particles reorientation during magnetic hyperthermia application: Shape matters twice

  • Simeonidis, Konstantinos
  • Morales, María Del Puerto
  • Marciello, Marzia
  • Angelakeris, Makis
  • Presa, Patricia de la
  • Lázaro-Carrillo, Ana
  • Tabero, Andrea
  • Villanueva, Ángeles
  • Chubykalo-Fesenko, O.
  • Serantes, David
Promising advances in nanomedicine such as magnetic hyperthermia rely on a precise control of the nanoparticle performance in the cellular environment. This constitutes a huge research challenge due to difficulties for achieving a remote control within the human body. Here we report on the significant double role of the shape of ellipsoidal magnetic nanoparticles (nanorods) subjected to an external AC magnetic field: first, the heat release is increased due to the additional shape anisotropy; second, the rods dynamically reorientate in the orthogonal direction to the AC field direction. Importantly, the heating performance and the directional orientation occur in synergy and can be easily controlled by changing the AC field treatment duration, thus opening the pathway to combined hyperthermic/mechanical nanoactuators for biomedicine. Preliminary studies demonstrate the high accumulation of nanorods into HeLa cells whereas viability analysis supports their low toxicity and the absence of apoptotic or necrotic cell death after 24 or 48 h of incubation., This work was partially supported by the EC FP-7 grant “NanoMag” (grant agreement no. 604448), the Spanish Ministry of Economy and Competitiveness (MAT2013-47078-C2-2-P, MAT2014-52069-R, MAT2013-47395-C4-3-R, MAT2015- 67557-C2-1-P - MICINN, CONSOLIDER CSD2007-00041, CTQ2013-48767-C3-3-R), and Gobierno de la Comunidad de Madrid (NANOFRONTMAG, S2013/MIT-2850). D.S. acknowledges financial support from Xunta de Galicia (I2C Postdoctoral Plan). A.T. thanks UAM for a predoctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Colloidal Flower-Shaped Iron Oxide Nanoparticles: Synthesis Strategies and Coatings

  • Gavilán, Helena
  • Morales, María Del Puerto
Gavilán, Helena et al., The assembly of magnetic cores into regular structures may notably influence the properties displayed by a magnetic colloid. Here, key synthesis parameters driving the self-assembly process capable of organizing colloidal magnetic cores into highly regular and reproducible multi-core nanoparticles are determined. In addition, a self-consistent picture that explains the collective magnetic properties exhibited by these complex assemblies is achieved through structural, colloidal, and magnetic means. For this purpose, different strategies to obtain flower-shaped iron oxide assemblies in the size range 25–100 nm are examined. The routes are based on the partial oxidation of Fe(OH)2, polyol-mediated synthesis or the reduction of iron acetylacetonate. The nanoparticles are functionalized either with dextran, citric acid, or alternatively embedded in polystyrene and their long-term stability is assessed. The core size is measured, calculated, and modeled using both structural and magnetic means, while the Debye model and multi-core extended model are used to study interparticle interactions. This is the first step toward standardized protocols of synthesis and characterization of flower-shaped nanoparticles., This work was partially supported by the European Commission Framework Program 7 (NanoMag project, NO 604448) and by the Spanish Ministry of Economy and Competitiveness (Mago project, No. MAT2014-52069-R)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning morphology and magnetism of magnetite nanoparticles by calix[8]arene-induced oriented aggregation

  • Vita, Francesco
  • Gavilán, Helena
  • Rossi, Francesca
  • Julián Fernández, César de
  • Secchi, Andrea
  • Arduini, Arturo
  • Albertini, Franca
  • Morales, María Del Puerto
Magnetite nanoparticles have been prepared by oriented aggregation exploiting the action of calix[8]arene, an organic macrocycle capable of complexing Fe ions, during the synthesis. Control over the degree of aggregation enables tuning of the morphology of the product, which can vary from multicore aggregated nanoparticles to nano-octahedra, with a dramatic change in the magnetic properties. Octahedral magnetite nanoparticles display ferrimagnetic behavior, which is typical of magnetite above 40 nm in size. In contrast, multicore nanostructures exhibit a narrower hysteresis loop and remarkable heating capacity under an alternating magnetic field. With the aim of producing a material useful for biomedical applications, all samples were made to be dispersible in water and biocompatible by ligand exchange with 2,3-dimercaptosuccinic acid. Their morphology and magnetic properties were maintained after functionalization, as well as their good colloidal properties, which were characterized by dynamic light scattering., This work was supported by the EU FP-7 grant “NanoMag” (grant agreement no. 604448), the Spanish Ministry of Economy and Competitiveness under the MAGO project (MAT2014-52069-R), the Cariparma Foundation through the BioNiMed project, the Italian Ministero dell'Università e della Ricerca (MIUR) (PRIN 2010CX2TLM “InfoChem”) and the University of Parma., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Degradation of magnetic nanoparticles mimicking lysosomal conditions followed by AC susceptibility

  • Gutiérrez, Lucía
  • Romero, Sonia
  • Silva, Gustavo B. da
  • Costo, Rocío
  • Vargas, María D.
  • Ronconi, Célia M.
  • Serna Pereda, Carlos J.
  • Veintemillas-Verdaguer, S.
  • Morales, María Del Puerto
[Background] A deeper knowledge on the effects of the degradation of magnetic nanoparticles on their magnetic properties is required to develop tools for the identification and quantification of magnetic nanoparticles in biological media by magnetic means., [Methods] Citric acid and phosphonoacetic acid-coated magnetic nanoparticles have been degraded in a medium that mimics lysosomal conditions. Magnetic measurements and transmission electron microscopy have been used to follow up the degradation process., [Results] Particle size is reduced significantly in 24 h at pH 4.5 and body temperature. These transformations affect the magnetic properties of the compounds. A reduction of the interparticle interactions is observed just 4 h after the beginning of the degradation process. A strong paramagnetic contribution coming from the degradation products appears with time., [Conclusions] A model for the in vivo degradation of magnetic nanoparticles has been followed to gain insight on the changes of the magnetic properties of iron oxides during their degradation. The degradation kinetics is affected by the particle coating, in our case being the phosphonoacetic acid-coated particles degraded faster than the citric acid-coated ones., LG is the beneficiary of a postdoctoral grant from the AXA Research Fund and GBdS, of a sandwich-PhD grant from the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq – Brazil). This work was also supported by the 7th framework programme of the European Commission Directorate-General for Research and Innovation (Nanomag 604448). X-ray diffraction, FTIR spectroscopy, and thermogravimetric and chemical analysis were carried out in the support laboratories of Instituto de Ciencia de Materiales de Madrid (CSIC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Studies of the Colloidal Properties of Superparamagnetic Iron Oxide Nanoparticles Functionalized with Platinum Complexes in Aqueous and PBS Buffer Media

  • Silva, Gustavo B. da
  • Marciello, Marzia
  • Morales, María Del Puerto
  • Serna Pereda, Carlos J.
  • Vargas, María D.
  • Ronconi, Célia M.
  • Costo, Rocío
This work has focused on the synthesis of three nanosystems composed of superparamagnetic iron oxide nanoparticles (SPIONs) coated either with a carboxylate platinum(IV) complex (PD = cis,cis,trans-[Pt(NH3)2Cl2(HOOCCH2CH2COO)(OH)]) or with platinum(II) complex functionalized dextrans (DexPt1 = [Pt(Dex-NH2)Cl3] and DexPt2 = [Pt(Dex-NH2)(NH3)2(H2O)]). All nanosystems have shown superparamagnetic behavior. Powder X-ray diffraction (XRD) has confirmed that the SPIONs were iron oxide phase and transmission electron microscopy (TEM) has shown average size of 6 nm (M6). Characterization of the nanosystems by inductively coupled plasma atomic emission spectroscopy (ICP AES) has revealed the presence of platinum on their surface (M6@PD, 0.54 mmol g-1 of Fe and M6@CA@DexPt1-2, 0.32-1.20 mmol g-1 of Fe); infrared spectroscopy (IR) and thermogravimetric and differential thermal analyses (TG-DTA) have confirmed the presence of dextran. Furthermore, the colloidal properties of these nanosystems (M6@PD and M6@CA@DexPt1-2) have been evaluated in water and in PBS buffer. Although M6@PD has shown good colloidal dispersion in water in the pH range of 2.0-8.0, the system underwent rapid agglomeration in PBS buffer. The M6@CA@DexPt1-2 nanosystems have exhibited improved colloidal behavior both in water and in PBS, where hydrodynamic sizes were kept below 100 nm over a large pH range (2.0-12.0). Furthermore, the latter systems have displayed isoelectric points below pH 5.0 and low surface charges at pH 7.0 (ζ-potential = -10 mV) and therefore PBS did not affect their colloidal stability., The authors would like to thank the Brazilian agencies National Council for Scientific and Technological Development (CNPq: Jovens Pesquisadores em Nanotecnologia grant number 550572/2012-0 and G. B. da Silva was recipient of Science without borders fellowship grant number 279444/2013-9), Brazilian Federal Agency for Support and Evaluation of Graduate Education (CAPES) and Rio de Janeiro Research Foundation (FAPERJ) for financial support. M. D. Vargas and C. M. Ronconi are recipients of CNPq research fellowships. We also thank the Multiuser Laboratory of Material Characterization (http://www.uff.br/lamate/). R. Costo and M. P. Morales would like to thank NANOMAG project (EC FP-7 grant agreement number 604448) for funding. X-ray diffraction, FTIR spectroscopy and thermogravimetric and chemical analysis were carried out in the support laboratories of Instituto de Ciencia de Materiales de Madrid (ICMM/CSIC)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Counterion and solvent effects on the size of magnetite nanocrystals obtained by oxidative precipitation

  • Luengo, Yurena
  • Morales, María Del Puerto
  • Gutiérrez, Lucía
  • Veintemillas-Verdaguer, S.
We present the effect of the counterions and the proportion of ethanol in the preparation of uniform magnetite nanocrystals by oxidative precipitation. In this work we compared the materials produced using iron(II) chloride, bromide and sulfate, sodium and potassium nitrates and hydroxides in water and ethanol 25%–water solution. The process was followed by chemical analysis of the remaining iron(II), and the variation of the pH. The magnetite nanoparticles were characterized by X-ray powder diffraction, transmission electron microscopy and specific surface area. Although the final product was always magnetite nanocrystals, the morphology and particle size distributions depended significantly on the nature of the counterions and the ethanol content. The morphologies observed ranged between cubic and octahedral depending on the size. Particle sizes were correlated with the Hofmeister scale that reflects the influence of the cosmotropic or caotropic character of the counterions in water or in water/ethanol mixtures. The Hofmeister effect accounts for the competition that occurs between the counterions and the magnetite precursors for the water molecules. The main conclusion is that cosmotropic counterions in the presence of ethanol favor the nucleation of magnetite and generate smaller nanocrystals. Nanoparticle size variations are greater than 50%, which is extremely relevant to their magnetic properties and therefore to their biomedical applications., This work was partially supported by grant No. MAT2014-52069-R from the Spanish Ministry of Economy and Competitiveness and the NanoMag project from the European Commission Framework Program 7 under grant agreement No. 604448. Lucía Gutiérrez acknowledges financial support from the Ramón y Cajal subprogram (RYC-2014-15512)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Formation mechanism of maghemite nanoflowers synthesized by a polyol-mediated process

  • Gavilán, Helena
  • Sánchez, Helena H.
  • Fortes Brollo, María Eugenia
  • Asín, Laura
  • Moerner, Kimmie K.
  • Frandsen, Cathrine
  • Lázaro, Francisco J.
  • Serna Pereda, Carlos J.
  • Veintemillas-Verdaguer, S.
  • Morales, María Del Puerto
  • Gutiérrez, Lucía
Magnetic nanoparticles are being developed as structural and functional materials for use in diverse areas, including biomedical applications. Here, we report the synthesis of maghemite (γ-FeO) nanoparticles with distinct morphologies: single-core and multicore, including hollow spheres and nanoflowers, prepared by the polyol process. We have used sodium acetate to control the nucleation and assembly process to obtain the different particle morphologies. Moreover, from samples obtained at different time steps during the synthesis, we have elucidated the formation mechanism of the nanoflowers: the initial phases of the reaction present a lepidocrocite (γ-FeOOH) structure, which suffers a fast dehydroxylation, transforming to an intermediate >undescribed> phase, possibly a partly dehydroxylated lepidocrocite, which after some incubation time evolves to maghemite nanoflowers. Once the nanoflowers have been formed, a crystallization process takes place, where the γ-FeO crystallites within the nanoflowers grow in size (from ∼11 to 23 nm), but the particle size of the flower remains essentially unchanged (∼60 nm). Samples with different morphologies were coated with citric acid and their heating capacity in an alternating magnetic field was evaluated. We observe that nanoflowers with large cores (23 nm, controlled by annealing) densely packed (tuned by low NaAc concentration) offer 5 times enhanced heating capacity compared to that of the nanoflowers with smaller core sizes (15 nm), 4 times enhanced heating effect compared to that of the hollow spheres, and 1.5 times enhanced heating effect compared to that of single-core nanoparticles (36 nm) used in this work., This work was supported by the EC FP-7 grant “NanoMag” (grant agreement no. 604448) and the Spanish Government by MAGO project (MAT2014-52069-R). L.G. acknowledges financial support from the Ramon y Cajal subprogram (RYC-2014-15512) and M.E.F.B. acknowledges financial support from the Brazilian agency CNPq grant (232947/2014-7)., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Prospects for magnetic nanoparticles in in vivo biomedical applications: synthesis, biodistribution and degradation

  • Morales, María Del Puerto
  • Gavilán, Helena
  • Ruiz, Amalia
  • Luengo, Yurena
  • Costo, Rocío
  • Gutiérrez, Lucía
  • Marzia, Marciello
  • González Carreño, T.
  • Veintemillas-Verdaguer, S.
  • Serna Pereda, Carlos J.
Oral presentation given at the 7th International Conference on Nanomaterials - Research & Application (NANOCON 2015), held on October 14th-16th, 2015, Brno (Czech Republic)., Recent developments indicate that magnetic nanoparticles could help to improve clinical practice in the treatment of cancer, most probably in synergy with other conventional treatments [1]. There already exist methods to obtain magnetic nanoparticles with the appropriate properties to be used in diagnosis and therapy but these properties need to be optimized to avoid its alteration after intravenous injection, via interaction between the nanoparticles and the blood components, aggregation in lysosomes inside cells or accumulation in tissues [2]. In this work we will describe a number of proven synthesis routes for magnetic nanoparticles intended for their use in biomedical applications [3]. We will show the effect of different characteristics of the magnetic colloids, such as particle size and size distribution, colloidal properties of the aqueous suspensions, such as hydrodynamic size and surface modification, and magnetic properties on their MRI relaxivity and heating capacity. Finally, it will be shown that magnetic nanoparticles biodistribution following systemic administration and its transformation over time can be tracked by AC magnetic susceptibility measurements, which allow identifying and quantifying magnetic nanoparticles in tissues, differentiating them from other endogenous species such as the ferritin iron cores [4]., This work was partially supported by projects from the Spanish Ministry of Economy and Competitiveness (MAT2011-23641), EU-FP7 MULTIFUN project (246479), EU-FP7 NANOMAG (604448), and AXA Research Fund (L.G.).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

SAXS analysis of single-and multi-core iron oxide magnetic nanoparticles

  • Szczerba, Wojciech
  • Costo, Rocío
  • Veintemillas-Verdaguer, S.
  • Morales, María Del Puerto
  • Thünemann, Andreas F.
This article reports on the characterization of four superparamagnetic iron oxide nanoparticles stabilized with dimercaptosuccinic acid, which are suitable candidates for reference materials for magnetic properties. Particles p1 and p2 are single-core particles, while p3 and p4 are multi-core particles. Small-Angle X-ray scattering analysis reveals a lognormal type of size distribution for the iron oxide cores of the particles. Their mean radii are 6.9nm (p1), 10.6nm (p2), 5.5nm (p3) and 4.1nm (p4), with narrow relative distribution widths of 0.08, 0.13, 0.08 and 0.12. The cores are arranged as a clustered network in the form of dense mass fractals with a fractal dimension of 2.9 in the multi-core particles p3 and p4, but the cores are well separated from each other by a protecting organic shell. The radii of gyration of the mass fractals are 48 and 44nm, and each network contains 117 and 186 primary particles, respectively. The radius distributions of the primary particle were confirmed with transmission electron microscopy. All particles contain purely maghemite, as shown by X-ray absorption fine structure spectroscopy., WS acknowledges funding from the European Union Seventh Framework Programme (FP7/2007–2013) under grant agreement No. 604448.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Size analysis of single-core magnetic nanoparticles

  • Ludwig, F.
  • Balceris, C.
  • Viereck, T.
  • Posth, O.
  • Steinhoff, U.
  • Gavilán, Helena
  • Costo, Rocío
  • Zeng, L.
  • Olsson, E.
  • Jonasson, Christian
  • Johansson, C.
Single-core iron-oxide nanoparticles with nominal core diameters of 14 nm and 19 nm were analyzed with a variety of non-magnetic and magnetic analysis techniques, including transmission electron microscopy (TEM), dynamic light scattering (DLS), static magnetization vs. magnetic field (M-H) measurements, ac susceptibility (ACS) and magnetorelaxometry (MRX). From the experimental data, distributions of core and hydrodynamic sizes are derived. Except for TEM where a number-weighted distribution is directly obtained, models have to be applied in order to determine size distributions from the measurand. It was found that the mean core diameters determined from TEM, M-H, ACS and MRX measurements agree well although they are based on different models (Langevin function, Brownian and Néel relaxation times). Especially for the sample with large cores, particle interaction effects come into play, causing agglomerates which were detected in DLS, ACS and MRX measurements. We observed that the number and size of agglomerates can be minimized by sufficiently strong diluting the suspension., This work was supported by the European Commission Framework Programme 7 under the NanoMag project (grant agreement no: 604448).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Distribution functions of magnetic nanoparticles determined by a numerical inversion method

  • Bender, P.
  • Balceris, C.
  • Ludwig, F.
  • Posth, O.
  • Bogart, L. K.
  • Szczerba, W.
  • Castro Dorado, Antonio
  • Nilsson, L.
  • Costo, Rocío
  • Gavilán, Helena
  • González-Alonso, D.
  • Pedro, I. D.
  • Barquin, L. F.
  • Johansson, C.
In the present study, we applied a regularized inversion method to extract the particle size, magnetic moment and relaxation-time distribution of magnetic nanoparticles from small-angle x-ray scattering (SAXS), DC magnetization (DCM) and AC susceptibility (ACS) measurements. For the measurements the particles were colloidally dispersed in water. At first approximation the particles could be assumed to be spherically shaped and homogeneously magnetized single-domain particles. As model functions for the inversion, we used the particle form factor of a sphere (SAXS), the Langevin function (DCM) and the Debye model (ACS). The extracted distributions exhibited features/peaks that could be distinctly attributed to the individually dispersed and non-interacting nanoparticles. Further analysis of these peaks enabled, in combination with a prior characterization of the particle ensemble by electron microscopy and dynamic light scattering, a detailed structural and magnetic characterization of the particles. Additionally, all three extracted distributions featured peaks, which indicated deviations of the scattering (SAXS), magnetization (DCM) or relaxation (ACS) behavior from the one expected for individually dispersed, homogeneously magnetized nanoparticles. These deviations could be mainly attributed to partial agglomeration (SAXS, DCM, ACS), uncorrelated surface spins (DCM) and/or intra-well relaxation processes (ACS). The main advantage of the numerical inversion method is that no ad hoc assumptions regarding the line shape of the extracted distribution functions are required, which enabled the detection of these contributions. We highlighted this by comparing the results with the results obtained by standard model fits, where the functional form of the distributions was a priori assumed to be log-normal shaped., This project has received funding from the European Commission Framework Programme 7 under grant agreement no 604448.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modelling the effect of different core sizes and magnetic interactions inside magnetic nanoparticles on hyperthermia performance

  • Jonasson, Christian
  • Schaller, Vincent
  • Zeng, Lunjie
  • Olsson, Eva
  • Frandsen, Cathrine
  • Castro, Alejandra
  • Nilsson, Lars
  • Bogart, Lara K.
  • Southern, Paul
  • Pankhurst, Quentin A.
  • Morales, María Del Puerto
  • Johansson, Christer
We present experimental intrinsic loss power (ILP) values, measured at an excitation frequency of 1 MHz and at relatively low field amplitudes of 3.4–9.9 kA/m, as a function of the mean core diameter, for selected magnetic nanoparticles (MNPs). The mean core sizes ranged from ca. 8 nm to 31 nm. Transmission electron microscopy indicated that those with smaller core sizes (less than ca. 22 nm) were single-core MNPs, while those with larger core sizes (ca. 29 nm to 31 nm) were multi-core MNPs. The ILP data showed a peak at core sizes of ca. 20 nm. We show here that this behaviour correlates well with the predicted ILP values obtained using either a non-interacting Debye model, or via dynamic Monte-Carlo simulations, the latter including core-core magnetic interactions for the multi-core particles. This alignment of the models is a consequence of the low field amplitudes used. We also present interesting results showing that the core-core interactions affect the ILP value differently depending on the mean core size., The work in this study was financed by the EU FP7 NMP project NanoMag, grant agreement no: 604448
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Identifying the presence of magnetite in an ensemble of iron-oxide nanoparticles: a comparative neutron diffraction study between bulk and nanoscale

  • González-Alonso, D.
  • Espeso, J. I.
  • Gavilán, Helena
  • Zeng, L. J.
  • Fernández-Díaz, M. T.
  • Subías, Gloria
  • Pedro, I. de
  • Rodríguez Fernández, J.
  • Bender, P.
  • Fernández Barquín, L.
  • Johansson, Christer
Scientific interest in iron-oxides and in particular magnetite has been renewed due to the broad scope of their fascinating properties, which are finding applications in electronics and biomedicine. Specifically, iron oxide nanoparticles (IONPs) are gathering attraction in biomedicine. Their cores are usually constituted by a mixture of maghemite and magnetite phases. In view of this, to fine-tune the properties of an ensemble of IONPs towards their applications, it is essential to enhance mass fabrication processes towards the production of monodisperse IONPs with controlled size, shape, and stoichiometry. We exploit the vacancy sensitivity of the Verwey transition to detect the presence of magnetite. Here we provide direct evidence for the Verwey transition in an ensemble of IONPs through neutron diffraction. This transition is observed as a variation in the Fe magnetic moment at octahedral sites and, in turn, gives rise to a change of the net magnetic moment. Finally, we show this variation as the microscopic ingredient driving the characteristic kink that hallmarks the Verwey transition in thermal variation of magnetization., This work has received funding from EU FP7 604448 (NanoMag) and MAT2017-83631-C3-R. The Institute Laue-Langevin is acknowledged for provision of beamtime on the D1B instrument., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

How shape and internal structure affect the magnetic properties of anisometric magnetite nanoparticles

  • Gavilán, H.
  • Posth, O.
  • Bogart, L. K.
  • Steinhoff, U.
  • Gutiérrez, L.
  • Morales, M. P.
A three-step aqueous approach to obtain large (>50 nm) magnetite single-core particles has been developed. The steps are a) synthesis of antiferromagnetic nanoparticles, b) particle coating and c) subsequent reduction of the core material to magnetite. By variation of precursor material and process conditions, the synthesis yielded rhombohedra, discs or needles below 200 nm. A combination of X-ray diffraction, 57Fe Mössbauer spectroscopy and infrared spectroscopy confirmed magnetite to be the dominant final core material. From transmission electron microscopy, we identified porous structures after the reduction. Magnetic characterization of the different magnetic nanopaticles revealed strikingly different magnetic behaviour depending on their shape, internal structure and reduction process. We conclude that each of these parameters have to be considered in further characterization of large magnetite nanoparticles.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Unravelling the mechanisms that determine the uptake and metabolism of magnetic single and multicore nanoparticles in a: Xenopus laevis model

  • Marín-Barba, M.
  • Gavilán, H.
  • Gutiérrez, L.
  • Lozano-Velasco, E.
  • Rodríguez-Ramiro, I.
  • Wheeler, G.N.
  • Morris, C.J.
  • Morales, M.P.
  • Ruiz, A.
Multicore superparamagnetic nanoparticles have been proposed as ideal tools for some biomedical applications because of their high magnetic moment per particle, high specific surface area and long term colloidal stability. Through controlled aggregation and packing of magnetic cores it is possible to obtain not only single-core but also multicore and hollow spheres with internal voids. In this work, we compare toxicological properties of single and multicore nanoparticles. Both types of particles showed moderate in vitro toxicity (MTT assay) tested in Hep G2 (human hepatocellular carcinoma) and Caco-2 (human colorectal adenocarcinoma) cells. The influence of surface chemistry in their biological behavior was also studied after functionalization with O, O'-bis(2-aminoethyl) PEG (2000 Da). For the first time, these nanoparticles were evaluated in a Xenopus laevis model studying their whole organism toxicity and their impact upon iron metabolism. The degree of activation of the metabolic pathway depends on the size and surface charge of the nanoparticles which determine their uptake. The results also highlight the potential of Xenopus laevis model bridging the gap between in vitro cell-based assays and rodent models for toxicity assessment to develop effective nanoparticles for biomedical applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Design strategies for shape-controlled magnetic iron oxide nanoparticles

  • Roca, A.G.
  • Gutiérrez, L.
  • Gavilán, H.
  • Fortes Brollo, M.E.
  • Veintemillas-Verdaguer, S.
  • Morales, M.D.P.
Ferrimagnetic iron oxide nanoparticles (magnetite or maghemite) have been the subject of an intense research, not only for fundamental research but also for their potentiality in a widespread number of practical applications. Most of these studies were focused on nanoparticles with spherical morphology but recently there is an emerging interest on anisometric nanoparticles. This review is focused on the synthesis routes for the production of uniform anisometric magnetite/maghemite nanoparticles with different morphologies like cubes, rods, disks, flowers and many others, such as hollow spheres, worms, stars or tetrapods. We critically analyzed those procedures, detected the key parameters governing the production of these nanoparticles with particular emphasis in the role of the ligands in the final nanoparticle morphology. The main structural and magnetic features as well as the nanotoxicity as a function of the nanoparticle morphology are also described. Finally, the impact of each morphology on the different biomedical applications (hyperthermia, magnetic resonance imaging and drug delivery) are analysed in detail. We would like to dedicate this work to Professor Carlos J. Serna, Instituto de Ciencia de Materiales de Madrid, ICMM/CSIC, for his outstanding contribution in the field of monodispersed colloids and iron oxide nanoparticles. We would like to express our gratitude for all these years of support and inspiration on the occasion of his retirement.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Identifying the presence of magnetite in an ensemble of iron-oxide nanoparticles: a comparative neutron diffraction study between bulk and nanoscale

  • González-Alonso, D.
  • Espeso, J.I.
  • Gavilán, H.
  • Zeng, L.J.
  • Fernández-Díaz, M.T.
  • Subías, G.
  • de Pedro, I.
  • Fernández, J.R.
  • Bender, P.
  • Barquín, L.F.
  • Johansson, C.
Scientific interest in iron-oxides and in particular magnetite has been renewed due to the broad scope of their fascinating properties, which are finding applications in electronics and biomedicine. Specifically, iron oxide nanoparticles (IONPs) are gathering attraction in biomedicine. Their cores are usually constituted by a mixture of maghemite and magnetite phases. In view of this, to fine-tune the properties of an ensemble of IONPs towards their applications, it is essential to enhance mass fabrication processes towards the production of monodisperse IONPs with controlled size, shape, and stoichiometry. We exploit the vacancy sensitivity of the Verwey transition to detect the presence of magnetite. Here we provide direct evidence for the Verwey transition in an ensemble of IONPs through neutron diffraction. This transition is observed as a variation in the Fe magnetic moment at octahedral sites and, in turn, gives rise to a change of the net magnetic moment. Finally, we show this variation as the microscopic ingredient driving the characteristic kink that hallmarks the Verwey transition in thermal variation of magnetization.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

Dipolar-coupled moment correlations in clusters of magnetic nanoparticles

  • Bender, Philipp Florian
  • Wetterskog, Erik
  • Honecker, Dirk
  • Fock, Jeppe
  • Frandsen, Cathrine
  • Moerland, Christian P.
  • Bogart, Lara Katrina
  • Posth, Oliver
  • Szczerba, Wojciech
  • Gavilán Rubio, Helena
  • Costo, Rocio
  • Fernández Díaz, María Teresa
  • González Alonso, David|||0000-0002-2871-6479
  • Fernández Barquín, Luis|||0000-0003-4722-3722
  • Johansson, Christer I.
Here, we resolve the nature of the moment coupling between 10-nm dimercaptosuccinic acid?coated magnetic nanoparticles. The individual iron oxide cores were composed of >95% maghemite and agglomerated to clusters. At room temperature the ensemble behaved as a superparamagnet according to Mössbauer and magnetization measurements, however, with clear signs of dipolar interactions. Analysis of temperature-dependent ac susceptibility data in the superparamagnetic regime indicates a tendency for dipolar-coupled anticorrelations of the core moments within the clusters. To resolve the directional correlations between the particle moments we performed polarized small-angle neutron scattering and determined the magnetic spin-flip cross section of the powder in low magnetic field at 300 K. We extract the underlying magnetic correlation function of the magnetization vector field by an indirect Fourier transform of the cross section. The correlation function suggests nonstochastic preferential alignment between neighboring moments despite thermal fluctuations, with anticorrelations clearly dominating for next-nearest moments. These tendencies are confirmed by Monte Carlo simulations of such core clusters., We thank the Institut Laue Langevin for provision of beamtime at the instruments D2B and D33. This Project has received funding from the European Commission Framework Programme 7 under Grant Agreement No. 604448 (NanoMag). C.F. also acknowledges funding from the Independent Research Fund Denmark.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

Distribution functions of magnetic nanoparticles determined by a numerical inversion method

  • Bender, Philipp Florian
  • Balceris, Christoph
  • Ludwig, Francis L.
  • Posth, Oliver
  • Bogart, Lara Katrina
  • Szczerba, Wojciech
  • Castro, Alejandra
  • Nilsson, Lars
  • Costo, R.
  • Gavilán, H.
  • González Alonso, David|||0000-0002-2871-6479
  • Pedro del Valle, Imanol de|||0000-0002-5581-2220
  • Fernández Barquín, Luis|||0000-0003-4722-3722
  • Johansson, Christer
In the present study, we applied a regularized inversion method to extract the particle size, magnetic moment and relaxation-time distribution of magnetic nanoparticles from small-angle x-ray scattering (SAXS), DC magnetization (DCM) and AC susceptibility (ACS) measurements. For the measurements the particles were colloidally dispersed in water. At first approximation the particles could be assumed to be spherically shaped and homogeneously magnetized single-domain particles. As model functions for the inversion, we used the particle form factor of a sphere (SAXS), the Langevin function (DCM) and the Debye model (ACS). The extracted distributions exhibited features/peaks that could be distinctly attributed to the individually dispersed and non-interacting nanoparticles. Further analysis of these peaks enabled, in combination with a prior characterization of the particle ensemble by electron microscopy and dynamic light scattering, a detailed structural and magnetic characterization of the particles. Additionally, all three extracted distributions featured peaks, which indicated deviations of the scattering (SAXS), magnetization (DCM) or relaxation (ACS) behavior from the one expected for individually dispersed, homogeneously magnetized nanoparticles. These deviations could be mainly attributed to partial agglomeration (SAXS, DCM, ACS), uncorrelated surface spins (DCM) and/or intra-well relaxation processes (ACS). The main advantage of the numerical inversion method is that no ad hoc assumptions regarding the line shape of the extracted distribution functions are required, which enabled the detection of these contributions. We highlighted this by comparing the results with the results obtained by standard model fits, where the functional form of the distributions was a priori assumed to be log-normal shaped., This project has received funding from the European Commission Framework Programme 7 under grant agreement no 604448
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

Probing the stability and magnetic properties of magnetosome chains in freeze-dried magnetotactic bacteria

  • Marcano Prieto, Lourdes
  • Orue Goikuria, Iñaki
  • Alba Venero, Diego
  • Honecker, Dirk
  • Fernández Barquín, Luis|||0000-0003-4722-3722
  • Bender, Philipp Florian
  • Muela Blázquez, Alicia
  • Fernández-Gubieda Ruiz, María Luisa
Magnetospirillum gryphiswaldense biosynthesize high-quality magnetite nanoparticles, called magnetosomes, and arrange them into a chain that behaves like a magnetic compass. Here we perform magnetometry and polarized small-angle neutron scattering (SANS) experiments on a powder of freeze-dried and immobilized M. gryphiswaldense. We confirm that the individual magnetosomes are single-domain nanoparticles and that an alignment of the particle moments along the magnetic field direction occurs exclusively by an internal, coherent rotation. Our magnetometry results of the bacteria powder indicate an absence of dipolar interactions between the particle chains and a dominant uniaxial magnetic anisotropy. Finally, we can verify by SANS that the chain structure within the immobilized, freeze-dried bacteria is preserved also after application of large magnetic fields up to 1 T., This project has received additional funding from the European Commission Framework Programme 7 under grant agreement no 604448 (NanoMag), and the Spanish Government is acknowledged for funding under project MAT2017-83631-C3-R.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

Magnetic structure factor of correlated moments in small-angle neutron scattering

  • Honecker, D
  • Fernández Barquín, Luis|||0000-0003-4722-3722
  • Bender, P.
The interplay between structural and magnetic properties of nanostructured magnetic materials allows one to realize unconventional magnetic effects, which results in a demand for experimental techniques to determine the magnetization profile with nanoscale resolution. Magnetic small-angle neutron scattering (SANS) probes both the chemical and magnetic nanostructure and is thus a powerful technique, e.g., for the characterization of magnetic nanoparticles. Here, we show that the conventionally used particle-matrix approach to describe SANS of magnetic particle assemblies, however, leads to a flawed interpretation. As a remedy, we provide general expressions for the field-dependent two-dimensional magnetic SANS cross section of correlated moments. It is shown that for structurally disordered ensembles the magnetic structure factor is in general, and contrary to common assumptions, (i) anisotropic also in zero field and (ii) that even in saturation the magnetic structure factor deviates from the nuclear one. These theoretical predictions explain qualitatively the intriguing experimental, polarized SANS data of an ensemble of dipolar-coupled iron oxide nanoparticles., This project has received funding from the European Commission Framework Programme 7 under Grant Agreement No. 604448 (NanoMag).
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

Influence of clustering on the magnetic properties and hyperthermia performance of iron oxide nanoparticles

  • Bender, Philipp Florian
  • Fock, Jeppe
  • Hansen, Mikkel Fougt
  • Bogart, Lara Katrina
  • Southern, Paul
  • Ludwig, Frank
  • Wiekhorst, Frank
  • Szczerba, Wojciech
  • Zeng, Lunjie
  • Heinke, David
  • Gehrke, Nicole
  • Fernández Díaz, M. T.
  • González Alonso, David|||0000-0002-2871-6479
  • Espeso Martínez, José Ignacio|||0000-0002-4018-7186
  • Rodríguez Fernández, Jesús|||0000-0002-4046-2969
  • Johansson, Christer I.
Clustering of magnetic nanoparticles can drastically change their collective magnetic properties, which in turn may influence their performance in technological or biomedical applications. Here, we investigate a commercial colloidal dispersion (FeraSpin (TM) R), which contains dense clusters of iron oxide cores (mean size around 9 nm according to neutron diffraction) with varying cluster size (about 18-56 nm according to small angle x-ray diffraction), and its individual size fractions (FeraSpin (TM) XS, S, M, L, XL, XXL). The magnetic properties of the colloids were characterized by isothermal magnetization, as well as frequency-dependent optomagnetic and AC susceptibility measurements. From these measurements we derive the underlying moment and relaxation frequency distributions, respectively. Analysis of the distributions shows that the clustering of the initially superparamagnetic cores leads to remanent magnetic moments within the large clusters. At frequencies below 10(5) rad s(-1), the relaxation of the clusters is dominated by Brownian (rotation) relaxation. At higher frequencies, where Brownian relaxation is inhibited due to viscous friction, the clusters still show an appreciable magnetic relaxation due to internal moment relaxation within the clusters. As a result of the internal moment relaxation, the colloids with the large clusters (FSL, XL, XXL) excel in magnetic hyperthermia experiments., We acknowledge the Institut Laue Langevin for provision of beamtime at the instrument D2B. This project (NanoMag) has received funding from the European Commission Framework Programme 7 under grant agreement no 604448.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

On the 'centre of gravity' method for measuring the composition of magnetite/maghemite mixtures, or the stoichiometry of magnetite-maghemite solid solutions, via 57Fe Mössbauer spectroscopy

  • Fock, Jeppe
  • Bogart, Lara Katrina
  • González Alonso, David|||0000-0002-2871-6479
  • Espeso Martínez, José Ignacio|||0000-0002-4018-7186
  • Hansen, Mikkel Fougt
  • Varón, Miriam
  • Frandsen, Cathrine
  • Pankhurst, Quentin A.
We evaluate the application of 57Fe Mössbauer spectroscopy to the determination of the composition of magnetite (Fe3O4)/maghemite (?-Fe2O3) mixtures and the stoichiometry of magnetite-maghemite solid solutions. In particular, we consider a recently proposed model-independent method which does not rely on a priori assumptions regarding the nature of the sample, other than that it is free of other Fe-containing phases. In it a single parameter, ?RT-the 'centre of gravity', or area weighted mean isomer shift at room temperature, T = 295 ± 5 K - is extracted by curve-fitting a sample's Mössbauer spectrum, and is correlated to the sample's composition or stoichiometry. We present data on high-purity magnetite and maghemite powders, and mixtures thereof, as well as comparison literature data from nanoparticulate mixtures and solid solutions, to show that a linear correlation exists between ?RT and the numerical proportion of Fe atoms in the magnetite environment: ? = Femagnetite/Fetotal = (?RT - ?o)/m, where ?o= 0.3206 ± 0.0022 mm s-1 and m = 0.2135 ± 0.0076 mm s-1. We also present equations to relate ? to the weight percentage w of magnetite in mixed phases, and the magnetite stoichiometry x = Fe2+/Fe3+ in solid solutions. The analytical method is generally applicable, but is most accurate when the absorption profiles are sharp; in some samples this may require spectra to be recorded at reduced temperatures. We consider such cases and provide equations to relate ?(T) to the corresponding ? value., This work was supported by the European Union Seventh Framework Programme through the NanoMag project ‘Nanometrology standardisation methods for magnetic nanoparticles’, under grant agreement no. 604448
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

Structural and magnetic properties of multi-core nanoparticles analysed using a generalised numerical inversion method

  • Bender, Philipp Florian
  • Bogart, Lara Katrina
  • Posth, Oliver
  • Szczerba, Wojciech
  • Rogers, Sarah E.
  • Castro, Alejandra
  • Nilsson, Lars
  • Zeng, Lunjie
  • Sugunan, Abhilash
  • Sommertune, Jens
  • Fornara, Andrea
  • González Alonso, David|||0000-0002-2871-6479
  • Fernández Barquín, Luis|||0000-0003-4722-3722
  • Johansson, Christer
The structural and magnetic properties of magnetic multi-core particles were determined by numerical inversion of small angle scattering and isothermal magnetisation data. The investigated particles consist of iron oxide nanoparticle cores (9 nm) embedded in poly(styrene) spheres (160 nm). A thorough physical characterisation of the particles included transmission electron microscopy, X-ray diffraction and asymmetrical flow field-flow fractionation. Their structure was ultimately disclosed by an indirect Fourier transform of static light scattering, small angle X-ray scattering and small angle neutron scattering data of the colloidal dispersion. The extracted pair distance distribution functions clearly indicated that the cores were mostly accumulated in the outer surface layers of the poly(styrene) spheres. To investigate the magnetic properties, the isothermal magnetisation curves of the multi-core particles (immobilised and dispersed in water) were analysed. The study stands out by applying the same numerical approach to extract the apparent moment distributions of the particles as for the indirect Fourier transform. It could be shown that the main peak of the apparent moment distributions correlated to the expected intrinsic moment distribution of the cores. Additional peaks were observed which signaled deviations of the isothermal magnetisation behavior from the non-interacting case, indicating weak dipolar interactions., This project has received funding from the European Commission Framework Programme 7 under grant agreement no 604448. ISIS-STFC is thanked for granting SANS beam time on SANS2D and Diego A. Venero (ISIS-STFC) for valuable discussions. José I. Espeso (Universidad de Cantabria) is acknowledged for helping with the XRD analysis.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

Revealing a masked Verwey transition in nanoparticles of coexisting Fe-oxide phases

  • González Alonso, David|||0000-0002-2871-6479
  • González Gómez, Jesús Antonio|||0000-0002-0381-6393
  • Gavilan, Helena
  • Fock, Jeppe
  • Zeng, Lunjie
  • Witte, Kerstin
  • Bender, Philipp
  • Fernández Barquín, Luis|||0000-0003-4722-3722
  • Johansson, Christer
The attractive electronic and magnetic properties together with their biocompatibility make iron-oxide nanoparticles appear as functional materials. In Fe-oxide nanoparticle (IONP) ensembles, it is crucial to enhance their performance thanks to controlled size, shape, and stoichiometry ensembles. In light of this, we conduct a comprehensive investigation in an ensemble of ca. 28 nm cuboid-shaped IONPs in which all the analyses concur with the coexistence of magnetite/maghemite phases in their cores. Here, we are disclosing the Verwey transition by temperature dependent (4?210 K) Raman spectroscopy., This work was supported by EU FP7 604448 (NanoMag) and MAT2017-83631-C3-R. Dr Norbert Schell is acknowledged for the time at the HEMS beamline, and J. F. thanks MUDP (MST- 141-01415).
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

Identifying the presence of magnetite in an ensemble of iron-oxide nanoparticles: a comparative neutron diffraction study between bulk and nanoscale

  • González Alonso, David|||0000-0002-2871-6479
  • Espeso Martínez, José Ignacio|||0000-0002-4018-7186
  • Gavilán, H.
  • Zeng, L.J.
  • Fernández-Díaz, M.T.
  • Subías Peruga, María Gloria
  • Pedro del Valle, Imanol de|||0000-0002-5581-2220
  • Rodríguez Fernández, Jesús|||0000-0002-4046-2969
  • Bender, Philipp Florian
  • Fernández Barquín, Luis|||0000-0003-4722-3722
  • Johansson, C.
Scientific interest in iron-oxides and in particular magnetite has been renewed due to the broad scope of their fascinating properties, which are finding applications in electronics and biomedicine. Specifically, iron oxide nanoparticles (IONPs) are gathering attraction in biomedicine. Their cores are usually constituted by a mixture of maghemite and magnetite phases. In view of this, to fine-tune the properties of an ensemble of IONPs towards their applications, it is essential to enhance mass fabrication processes towards the production of monodisperse IONPs with controlled size, shape, and stoichiometry. We exploit the vacancy sensitivity of the Verwey transition to detect the presence of magnetite. Here we provide direct evidence for the Verwey transition in an ensemble of IONPs through neutron diffraction. This transition is observed as a variation in the Fe magnetic moment at octahedral sites and, in turn, gives rise to a change of the net magnetic moment. Finally, we show this variation as the microscopic ingredient driving the characteristic kink that hallmarks the Verwey transition in thermal variation of magnetization., This work has received funding from EU FP7 604448 (NanoMag) and MAT2017-83631-C3-R. The Institute Laue-Langevin is acknowledged for provision of beamtime on the D1B instrument. We thank Dr Oscar Fabelo for his initial guidance in the Rietveld analysis. Dr Lorena Gonz´alez-Legarreta is acknowledged for her critical review and support during the preparation of this manuscript.
UCrea Repositorio Abierto de la Universidad de Cantabria
Publicación Artículo científico (JournalArticle)

Relating Magnetic Properties and High Hyperthermia Performance of Iron Oxide Nanoflowers

  • Bender, Philipp Florian
  • Fock, Jeppe
  • frandsen, Catherine
  • Hansen, Mikkel F.
  • Balceris, Christoph
  • Ludwig, Frank
  • Posth, Oliver
  • Wetterskog, Erik
  • Bogart, Lara K.
  • Southern, Paul
  • Szczerba, Wojciech
  • Zeng, Lunjie
  • Witte, Kerstin
  • Grüttner, Cordula
  • Westphal, Fritz
  • Honecker, Dirk
  • González Alonso, David|||0000-0002-2871-6479
  • Fernández Barquín, Luis|||0000-0003-4722-3722
  • Johansson, Christer
We investigated, in depth, the interrelations among structure, magnetic properties, relaxation dynamics and magnetic hyperthermia performance of magnetic nanoflowers. The nanoflowers are about 39 nm in size, and consist of densely packed iron oxide cores. They display a remanent magnetization, which we explain by the exchange coupling between the cores, but we observe indications for internal spin disorder. By polarized small-angle neutron scattering, we unambiguously confirm that, on average, the nanoflowers are preferentially magnetized along one direction. The extracted discrete relaxation time distribution of the colloidally dispersed particles indicates the presence of three distinct relaxation contributions. We can explain the two slower processes by Brownian and classical Néel relaxation, respectively. The additionally observed very fast relaxation contributions are attributed by us to the relaxation of disordered spins within the nanoflowers. Finally, we show that the intrinsic loss power (ILP, magnetic hyperthermia performance) of the nanoflowers measured in colloidal dispersion at high frequency is comparatively large and independent of the viscosity of the surrounding medium. This concurs with our assumption that the observed relaxation in the high frequency range is primarily a result of internal spin relaxation, and possibly connected to the disordered spins within the individual nanoflowers., The authors thank the Institute Laue-Langevin for provision of neutron beamtime at instrument D33. This project has received funding from the European Commission Framework Programme 7 under Grant Agreement No. 604448 (NanoMag).
Docta Complutense
Publicación Artículo científico (JournalArticle)

In-situ particles reorientation during magnetic hyperthermia application: Shape matters twice

  • Simeonidis, Konstantinos
  • Puerto Morales Herrero, María Del
  • Marciello, Marzia
  • Angelakeris, Makis
  • Presa Muñoz De Toro, Patricia Marcela De La
  • Lázaro Carrillo, Ana
  • Tabero Truchado, Andrea
  • Villanueva Oroquieta, Ángeles
  • Chubykalo-Fesenko, Oksana
  • Serantes Abalo, David
Promising advances in nanomedicine such as magnetic hyperthermia rely on a precise control of the nanoparticle performance in the cellular environment. This constitutes a huge research challenge due to difficulties for achieving a remote control within the human body. Here we report on the significant double role of the shape of ellipsoidal magnetic nanoparticles (nanorods) subjected to an external AC magnetic field: first, the heat release is increased due to the additional shape anisotropy; second, the rods dynamically reorientate in the orthogonal direction to the AC field direction. Importantly, the heating performance and the directional orientation occur in synergy and can be easily controlled by changing the AC field treatment duration, thus opening the pathway to combined hyperthermic/mechanical nanoactuators for biomedicine. Preliminary studies demonstrate the high accumulation of nanorods into HeLa cells whereas viability analysis supports their low toxicity and the absence of apoptotic or necrotic cell death after 24 or 48 h of incubation.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Design strategies for shape-controlled magnetic iron oxide nanoparticles

  • Gómez Roca, Alejandro|||0000-0001-6610-9197
  • Gutiérrez, Lucía|||0000-0003-2366-3598
  • Gavilán, Helena
  • Fortes Brollo, Maria Eugênia
  • Veintemillas Verdaguer, Sabino
  • Morales, María del Puerto|||0000-0002-7290-7029
Ferrimagnetic iron oxide nanoparticles (magnetite or maghemite) have been the subject of an intense research, not only for fundamental research but also for their potentiality in a widespread number of practical applications. Most of these studies were focused on nanoparticles with spherical morphology but recently there is an emerging interest on anisometric nanoparticles. This review is focused on the synthesis routes for the production of uniform anisometric magnetite/maghemite nanoparticles with different morphologies like cubes, rods, disks, flowers and many others, such as hollow spheres, worms, stars or tetrapods. We critically analyzed those procedures, detected the key parameters governing the production of these nanoparticles with particular emphasis in the role of the ligands in the final nanoparticle morphology. The main structural and magnetic features as well as the nanotoxicity as a function of the nanoparticle morphology are also described. Finally, the impact of each morphology on the different biomedical applications (hyperthermia, magnetic resonance imaging and drug delivery) are analysed in detail. We would like to dedicate this work to Professor Carlos J. Serna, Instituto de Ciencia de Materiales de Madrid, ICMM/CSIC, for his outstanding contribution in the field of monodispersed colloids and iron oxide nanoparticles. We would like to express our gratitude for all these years of support and inspiration on the occasion of his retirement.