Pasar al contenido principal

DISEÑO DE NANOHILOS MAGNETICOS PARA SU USO EN TECNOLOGIAS LIMPIAS

MAT2016-76824-C3-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2016
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Anisotropic magnetic nanoparticles for biomedicine: bridging frequency separated AC-field controlled domains of actuation

  • Serantes Abalo, David
  • Chantrell, Roy W.
  • Gavilán, Helena
  • Puerto Morales, María del
  • Chubykalo-Fesenko, Oksana
  • Baldomir Fernández, Daniel
  • Satoh, Akira
Magnetic nanoparticles (MNPs) constitute promising nanomedicine tools based on the possibility of obtaining different actuations (for example, heating or mechanical response) triggered by safe remote stimuli. Particularly, the possibility of performing different tasks using the same entity constitutes a main research target towards optimizing the treatment. But such a goal represents, in general, a very difficult step because the requisites for achieving efficient responses for separate actuations are often disparate – if not completely incompatible. An example of this is the response of MNPs to external AC fields, which could in principle be exploited for either magneto-mechanical actuation (MMA) at low frequencies (tens of Hz); or heat release at high frequency (0.1–1 MHz range) for magnetic fluid hyperthermia (MFH). The problem is that efficient MMA involves large torque, the required material parameters for which are detrimental to high heating, thus hindering the possibility of effective alternation between both responses. To overcome such apparent incompatibility, we propose a simple approach based on the use of anisotropic MNPs. The key idea is that the AC-frequency change must be concurrent with a field-amplitude variation able to promote – or impede – the reversal over the shape-determined anisotropy energy barrier. This way it is possible to switch the particle response between an efficient (magnetically dissipationless) rotation regime at low-f, for MMA, and a “frozen” (non-rotatable) high-energy-dissipation regime at high-f, for MFH. Furthermore, we show that such an alternation can also be achieved within the same high-f MFH regime. We use combined Brownian dynamics and micromagnetic simulations, based on real experimental samples, to show how such a field threshold can be tuned to working conditions with hexagonal-disk shape anisotropy
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A comparative study of magnetic properties of large diameter Co nanowires and nanotubes

  • Fernández-Roldán, José A.
  • Chrischon, Dieivase
  • Dorneles, Lucio Strazzabosco
  • Chubykalo-Fesenko, O.
  • Vázquez Villalabeitia, Manuel
  • Bran, Cristina
A comparative study of the magnetic properties of the arrays of Co nanowires and nanotubes with large external diameters (180 nm) has been carried out. The nanowires/nanotubes were grown by electrodeposition into the self-assembled pores of anodic alumina membranes. The experimental study of their magnetic behavior was focused on the angular dependence of hysteresis loops and their parameters. In both nanowire and nanotube arrays, from the analysis of experimental data, effective longitudinal magnetic anisotropy is concluded, which is stronger in the case of the nanotube array. In addition, the extremely small remanence observed for all loops indicates the important role played by magnetostatic interactions. Micromagnetic simulations were first performed considering intrinsic shape and magnetocrystalline anisotropy terms, together with an effective easy-plane anisotropy to account for those magnetostatic interactions. A qualitative agreement between experiments and simulations is found despite the complexity introduced by the intrinsic and extrinsic array properties (i.e., large diameters, grain structure, and array configuration). In addition, simulations were also carried out for individual nanowire/nanotube with a particular emphasis to understand their differences at the remanence, due to pure geometry contribution., This work was supported by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) under the grants MAT2016-76824-C3-1-R and FIS2016-78591-C3-3-R, and the Regional Government of Madrid under project under project S2013/MIT2850 NANOFRONTMAG-CM.; D.C. and L.S.D. acknowledge Brazilian PDSE Doctoral Programme and Bolsista da CAPES - Proc. n° BEX 7845/14-6.; L.S.D. acknowledges support from Brazilian agency CNPq (Grant 302950/2017-6). J.A. F.-R. acknowledges the support from MINECO and European Social Fund though fellowship BES-2014-068789., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effective anisotropies in magnetic nanowires using the torque method

  • Rotarescu, C.
  • Moreno, R.
  • Fernández-Roldán, José A.
  • Trabada, D. G.
  • Nemes, N. M.
  • Fehér, T.
  • Bran, Cristina
  • Vázquez Villalabeitia, Manuel
  • Chiriac, H.
  • Lupu, N.
  • Óvári, T. A.
  • Chubykalo-Fesenko, O.
The effective anisotropy of Co-based nanowires such as CoFe, monocrystalline hcp Co and polycrystalline Co with a mixture of fcc and hcp grains has been evaluated through micromagnetic modeling based on the magnetization torque simulations. We retrieve the experimental profile of the torque curves and show that the non-harmonic forms observed at low fields correspond to the presence of open vortices at the nanowire ends. Our results show that strong hcp anisotropy of Co cannot overcome the uniaxial character of the effective anisotropy which always remains parallel to the nanowire axis, even in the case of magnetocrystalline easy axis perpendicular to the nanowire. We evaluate effective anisotropy values for monocrystalline Co nanowires with different easy axis orientations and polycrystalline Co nanowires with different mixtures of hcp and fcc grains., Work supported by the Romanian Executive Agency for Higher Education, Research, Development and Innovation Funding (UEFISCCDI) under project PN 16 37 02 02 (Nucleu Program) and by the European Commission under Grant no. 316194 (NANOSENS). The work of R.M., N.N., M.V and O.C. F was partially supported by Spanish MINECO Grant MAT2016-76824-C3-1-R, MAT2014-52405-C02-02 and MAT2013-48054-C2-1-R. The work of T.F. was partially supported by the Hungarian research fund OTKA K 107228.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Doubling of the magnetic energy product in ferromagnetic nanowires at ambient temperature by capping their tips with an antiferromagnet

  • Wang, F. Z.
  • Salikhov, R.
  • Spasova, M.
  • Liébana-Viñas, S.
  • Bran, Cristina
  • Chen, Y. S.
  • Vázquez Villalabeitia, Manuel
  • Farle, M.
  • Wiedwald, U.
We present an approach to prepare free-standing tips of micrometer-long nanowires electrodeposited in anodic aluminum oxide nanopores. Such open tips can be further processed, e.g. for vertical interconnects of functional layers or for tailoring the magnetization reversal of ferromagnetic nanowires. The magnetic switching of nanowires is usually initiated by vortex or domain formation at the nanowire tips. We show that coating the tips of FeCo nanowires (diameter 40 nm, length 16 μm) with thin antiferromagnetic FeMn capping layers (thickness ≈10 nm) leads to magnetic hardening with a more than doubled energy product at ambient temperature., RS acknowledges funding by the Deutsche Forschungsgemeinschaft (DFG) under Grant No. SA 3095/2-1. This work has been partly supported by the Spanish Ministry of Economy and Competitiveness under project MAT2013-48054-C2-1-R and MAT2016-76824-C3-1-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct observation of transverse and vortex metastable magnetic domains in cylindrical nanowires

  • Bran, Cristina
  • Fernández-Roldán, José A.
  • Palmero, Ester M.
  • Berganza, Eider
  • Guzmán, J.
  • Pérez del Real, Rafael
  • Asenjo Barahona, Agustina
  • Fraile Rodríguez, A.
  • Foerster, Michael
  • Aballe, Lucía
  • Chubykalo-Fesenko, O.
  • Vázquez Villalabeitia, Manuel
We present experimental evidence of transverse magnetic domains, previously observed only in nanostrips, in CoNi cylindrical nanowires with designed crystal symmetry and tailored magnetic anisotropy. The transverse domains are found together with more conventional vortex domains along the same cylindrical nanowire, denoting a bistable system with similar energies. The surface and the inner magnetization distribution in both types of domains are analyzed by photoemission electron microscopy with x-ray magnetic circular dichroism contrast, and hysteresis loop in individual nanowires are measured by magneto-optical Kerr effect. These experimental data are understood and compared with complementary micromagnetic simulations., The study has been performed under the framework of the Projects No. MAT2013-48054-C2-1-R, MAT2016-76824-C3-1-R, MAT-2015-68772-P, MAT2015-64110-C2-2-P supported by the MINECO from Spain and DURSI 2014SGR220 supported by the Catalan Government. J.A.F.-R. acknowledges financial support from MINECO and the ESF through the “Ayudas para contratos predoctorales para la formación de doctores 2014.”
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Oscillatory behavior of the domain wall dynamics in a curved cylindrical magnetic nanowire

  • Moreno, R.
  • Carvalho-Santos, V. L.
  • Espejo, A. P.
  • Laroze, D.
  • Chubykalo-Fesenko, O.
  • Altbir, Dora
Understanding the domain wall dynamics is an important issue in modern magnetism. Here we present results of domain wall displacement in curved cylindrical nanowires at a constant magnetic field. We show that the average velocity of a transverse domain wall increases with curvature. Contrary to what is observed in stripes, in a curved wire the transverse domain wall oscillates along and rotates around the nanowire with the same frequency. These results open the possibility of new oscillation-based applications., In Chile, we thank the following for partial financial support: the Centers of Excellence with BASAL/CONICYT financing (Grant No. FB0807), Fondecyt (Grant No. 1160198), and CONICYT-ANILLO-ATC 1410. In Brazil, we thank the CNPq (Grants No. 301015/2015-5 and No. 401132/2016-1) and Fapesb (Grant No. JCB0063/2016). We thank the Spanish Ministry of Economy and Competitiveness (Grants No. MAT2013-47078-C2-2-P, No. MAT2016-76824-C3-1-R, and No. FIS2016-78591-C3-3-R).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multisegmented nanowires: a step towards the control of the domain wall configuration

  • Berganza, Eider
  • Jaafar, Miriam
  • Bran, Cristina
  • Fernández-Roldán, José A.
  • Chubykalo-Fesenko, O.
  • Vázquez Villalabeitia, Manuel
  • Asenjo Barahona, Agustina
Cylindrical nanowires synthesized by controlled electrodeposition constitute excellent strategic candidates to engineer magnetic domain configurations. In this work, multisegmented CoNi/Ni nanowires are synthesized for tailoring a periodic magnetic structure determined by the balance between magnetocrystalline and magnetostatic energies. High-resolution Transmission Electron Microscopy confirms the segmented growth and the sharp transition between layers. Although both CoNi and Ni segments have similar fcc cubic crystal symmetry, their magnetic configuration is quite different as experimentally revealed by Magnetic Force Microscopy (MFM) imaging. While the Ni segments are single domain with axial magnetization direction, the CoNi segments present two main configurations: A single vortex state or a complex multivortex magnetic configuration, which is further interpreted with the help of micromagnetic simulations. This original outcome is ascribed to the tight competition between anisotropies. The almost monocrystalline fcc structure of the CoNi segments, as revealed by the electron diffraction patterns, which is atypical for its composition, contributes to balance the magnetocrystalline and shape anisotropies. The results of MFM measurements performed under in-plane magnetic field demonstrate that it is possible to switch from the multivortex configuration to a single vortex configuration with low magnetic fields., We acknowledge the support from the Spanish Ministerio de Economia y Competitividad (MINECO) under projects no. MAT2013-48054-C2-1-R, Consolider CSD2010-00024, MAT2015-73775-JIN and MAT2016-76824-C3-1-R. J.A. acknowledges the support from MINECO and the ESF though ‘Ayudas para contratos predoctorales para la formación de doctores 2014’.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanopatterned hard/soft bilayer magnetic antidot arrays with long-range periodicity

  • Kaidatzis, Andreas
  • Pérez del Real, Rafael
  • Álvaro Bruna, Raquel
  • Niarchos, Dimitrios
  • Vázquez Villalabeitia, Manuel
  • García-Martín, José Miguel
A top-down approach using focused ion beam has been employed to fabricate Co/Permalloy hard-soft bilayer magnetic antidot arrays. These nanopatterned films are studied with particular emphasis on magnetic coercivity. The antidots have a diameter of 40 nm and the studied antidot symmetries are square and hexagonal. A dependence of magnetic coercivity on the relative thicknesses of the magnetically hard (Co) and soft (Permalloy) layers is found; increasing Permalloy thickness results in lower magnetic coercivity. Furthermore, the long-range periodicity of top-down nanopatterned antidots results in higher magnetic coercivity and a stronger magnetic domain-wall pinning, compared to identical hard/soft bilayers of short-range order deposited on porous anodic alumina. The combination of antidot symmetry and hard/soft thickness, allow for efficient tailoring of the magnetic properties of nanopatterned thin films. Finally, magnetic force microscopy imaging of the antidot array magnetic configuration shows striking qualitative differences between the two array symmetries: square symmetry arrays have inhomogeneous magnetic state and a high density of immobile super-domain walls, whereas hexagonal symmetry arrays show a homogeneous magnetic configuration., The authors acknowledge the service from the MiNa Laboratory at IMN. The study was funded by Comunidad de Madrid under projects S2018/NMT-4291 TEC2SPACE and S2018/NMT-4321 NANOMAGCOST), the Spanish MINECO under projects CSIC13-4E-1794, and MAT2016-76824-C3-1-R and the EU (FEDER, FSE). The authors acknowledge partial support by the project MIS5002567, implemented under the“Action for the Strategic Development on the Research and Technological Sector”, funded by the Operational Programme “Competitiveness, Entrepreneurship and Innovation” (NSRF 2014-2020) and co-financed by Greece and the European Union (European Regional Development Fund). Finally, the authors would like to thank Dr Vasillis Psycharis (Institute of Nanoscience and Nanotechnology) for advice on XRD characterization., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling magnetic-field-induced domain wall propagation in modulated-diameter cylindrical nanowires

  • Fernández-Roldán, José A.
  • De Riz, A.
  • Trapp, B.
  • Thirion, C.
  • Vázquez Villalabeitia, Manuel
  • Toussaint, J.-C.
  • Fruchart, Olivier
  • Gusakova, D.
[EN] Domain wall propagation in modulated-diameter cylindrical nanowires is a key phenomenon to be studied with a view to designing three-dimensional magnetic memory devices. This paper presents a theoretical study of transverse domain wall behavior under the influence of a magnetic field within a cylindrical nanowire with diameter modulations. In particular, domain wall pinning close to the diameter modulation was quantified, both numerically, using finite element micromagnetic simulations, and analytically. Qualitative analytical model for gently sloping modulations resulted in a simple scaling law which may be useful to guide nanowire design when analyzing experiments. It shows that the domain wall depinning field value is proportional to the modulation slope., We acknowledge financial support from the French National Research Agency (ANR) (Grant No. JCJC MATEMAC-3D) and from the European Union’s Seventh Framework Programme (FP7/2007–2013) under grant agreement No. 309589 (M3d). J. A. F.-R. is grateful for financial support from the Spanish MINECO under MAT2016-76824-C3-1-R and co-support from the ESF though BES-2014-068789 and EEBB-I-16-10934.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Geometrically designed domain wall trap in tri-segmented nickel magnetic nanowires for spintronics devices

  • Nasirpouri, Farzad
  • Peighambari-Sattari, Seyed-Majid
  • Bran, Cristina
  • Palmero, Ester M.
  • Berganza, Eider
  • Vázquez Villalabeitia, Manuel
  • Patsopoulos, Aristotelis
  • Kechrakos, Dimitris
[EN] “Domain wall traps” have been engineered and well-exploited in nanostrips by creating a geometrical trapping site, e.g. a single notch along a stripe, compared to diameter-modulated (DM) cylindrical magnetic nanowires (NWs) where multi-segmented DM-NWs have been generally studied. Here, we report our systematic study on the magnetization behavior, domain wall structure and its nucleation/propagation in tri-segmented diameter-modulated Ni nanowires, a simple system to investigate the magnetization reversal as function of segment geometry and lay-out order. We find out that the magnetization behavior of single Ni DM-NWs exhibits the significance of positional ordering of thick and thin segments, distinguished by two distinct geometries including: dumbbell-type (type I) and rolling pin-type (type II). Based on experimental and theoretical simulations, it was evidenced that the wide-narrow junctions create trap sites for domain walls where the narrow segment restricts their motion. This type of geometrically engineered nanowires exhibit potential efficiency for future novel spintronic devices in particular when assembled in arrays of DM-NWs as a practical three-dimensional memory device., The financial support of Iranian National Science Foundation (INSF) under a grant number of 94010670 is acknowledged. F.N. acknowledges the financial support of CSIC to visit ICMM at Madrid. S.M.P. acknowledges the visiting scholarship to ICMM from Iranian Ministry of Science, Research and Technology and Sahand University research affair’s research studentship grant. Authors wish to thank Agustina Asenjo from ICMM/CSIC for her support in the MFM imaging and interpretation. This work has been partly supported by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) under project MAT2016-76824-C3-1-R and by the Regional Government of Madrid under project S2018/NMT-4321 NANOMAGCOST-CM. A.P. is co-financed by Greece and the European Union (European Social Fund ESF) through the Operational Programme «Human Resources Development, Education and Lifelong Learning» in the context of the project “Strengthening Human Resources Research Potential via Doctorate Research” (MIS-5000432), implemented by the State Scholarships Foundation (ΙΚΥ). DK acknowledges financial support from the Special Account for Research of ASPETE through project NANOSKY (No 80146).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Controlling domain wall oscillations in bent cylindrical magnetic wires

  • Cacilhas, R.
  • De Araujo, C.I.L.
  • Carvalho-Santos, V. L.
  • Moreno, R.
  • Chubykalo-Fesenko, O.
  • Altbir, Dora
[EN] Magnetic cylindrical nanowires are promising candidates for future three-dimensional nanotechnology. Domain walls (DWs) in magnetic nanowires play the role of information carriers, and the development of applications requires proper description of their dynamics. Here we perform a detailed analytical and numerical analysis of the DW motion along a bent magnetic nanowire under the action of tangential magnetic fields. Our results show that the DW velocity, precession, and oscillation frequencies can be controlled by the interplay between the curvature and the external magnetic field. Small magnetic fields induce a DW motion without precession and oscillatory behavior, while higher magnetic fields yield a Walker breakdown regime, in which an oscillatory forward and backward DW motion is observed. Controlled DW motion under the Walker breakdown regime makes magnetic nanowires potential candidates for nanoscale microwave generation and sensing., In Brazil, this study was financed in part by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior -Brasil (CAPES) - Finance Code 001. The authors also thank CNPq (Grants No. 401132/2016-1 and No. 302084/2019-3). In Scotland, we acknowledge the Natural Environment Research Council (Grant No. NE/S011978/1). In Chile, we acknowledge financial support from FONDECYT Grant No. 1160198 and CONICYT through Centro Basal FB0807. In Spain, we acknowledge the financial support from the Ministry of Economy and Competitivity under Grant No.MAT2016-76824-C3-1-R.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Customized MFM probes based on magnetic nanorods

  • Jaafar, Miriam
  • Pablo-Navarro, Javier
  • Berganza, Eider
  • Ares, Pablo
  • Magén, César
  • Masseboeuf, Aurélien
  • Gatel, Christophe
  • Snoeck, Etienne
  • Gómez-Herrero, Julio
  • Teresa, José María de
  • Asenjo Barahona, Agustina
Focused Electron Beam Induced Deposition (FEBID) for magnetic tip fabrication is presented in this work as an alternative to conventional sputtering-based Magnetic Force Microscopy (MFM) tips. FEBID enables the growth of a high-aspect-ratio magnetic nanorod with customized geometry and composition to overcome the key technical limitations of MFM probes currently on the market. The biggest advantage of these tips, in comparison with CoCr coated pyramidal probes, lies in the capability of creating sharp ends, nearly 10 nm in diameter, which provides remarkable (topographic and magnetic) lateral resolution in samples with magnetic features close to the resolution limits of the MFM technique itself. The shape of the nanorods produces a very confined magnetic stray field, whose interaction with the sample is extremely localized and perpendicular to the surface, with negligible in-plane components. This effect can lead to a better analytical and numerical modelling of the MFM probes and to an increase in the sensitivity without perturbing the magnetic configuration of soft samples. Besides, the high-aspect ratio achievable in FEBID nanorod tips makes them magnetically harder than the commercial ones, reaching coercive fields higher than 900 Oe. According to the results shown, tips based on magnetic nanorods grown by FEBID can be eventually used for quantitative analysis in MFM measurements. Moreover, the customized growth of Co- or Fe-based tips onto levers with different mechanical properties allows MFM studies that demand different measuring conditions. To showcase the versatility of this type of probe, as a last step, MFM is performed in a liquid environment, which still remains a challenge for the MFM community largely due to the lack of appropriate probes on the market. This opens up new possibilities in the investigation of magnetic biological samples., M. J., E. B. and A. A. acknowledge the support from the Spanish Ministry of Economy and Competitiveness (MINECO) under project nos. MAT2015-73775-JIN and MAT2016-76824-C3-1-R. M. J. and J. G.-H acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through The “María de Maeztu” Programme for Units of Excellence in R&D (MDM-2014-0377). M. J. also acknowledges financial support from the Universidad Autónoma de Madrid and Comunidad Autónoma de Madrid through the project SI1/PJI/2019-00055. J. P.-N., C. M. and J. M. D. T. acknowledge financial support from the Spanish MINECO through the projects MAT2017-82970-C2-1-R, MAT2017-82970-C2-2-R and RED2018-102627-T, from the Aragon Regional Government (Construyendo Europa desde Aragón) through the project E13_20R with European Social Fund funding. This project has received funding from the European's Union Horizon 2020 research and innovation programme under Grant No. 823717-ESTEEM3. J. P.-N. grant is funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores (BES-2015-072950) of the Spanish MINECO with the participation of the European Social Fund., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Half-hedgehog spin textures in sub-100 nm soft magnetic nanodots

  • Berganza, Eider
  • Jaafar, Miriam
  • Fernández-Roldán, José A.
  • Goiriena-Goikoetxea, Maite
  • Pablo-Navarro, Javier
  • García Arribas, Alfredo
  • Guslienko, K. Yu.
  • Magén, César
  • Teresa, José María de
  • Chubykalo-Fesenko, O.
  • Asenjo Barahona, Agustina
Topologically non-trivial structures such as magnetic skyrmions are nanometric spin textures of outstanding potential for spintronic applications due to their unique features. It is well known that Néel skyrmions of definite chirality are stabilized by the Dzyaloshinskii–Moriya exchange interaction (DMI) in bulk non-centrosymmetric materials or ultrathin films with strong spin–orbit coupling at the interface. In this work, we show that soft magnetic (permalloy) hemispherical nanodots are able to host three-dimensional chiral structures (half-hedgehog spin textures) with non-zero tropological charge. They are observed at room temperature, in absence of DMI interaction and they can be further stabilized by the magnetic field arising from the Magnetic Force Microscopy probe. Micromagnetic simulations corroborate the experimental data. Our work implies the existence of a new degree of freedom to create and manipulate complex 3D spin-textures in soft magnetic nanodots and opens up future possibilities to explore their magnetization dynamics., M. J., E. B., J. A. F. R and A. A. acknowledge the support from the Spanish Ministerio de Economia y Competitividad (MINECO) under projects no. S2018/NMT 4321, MAT2015-73775-JIN and MAT2016-76824-C3-1-R. E. B. acknowledges the financial support from the Alexander von Humboldt Foundation. M. G-G. and A.G-A. acknowledge the financial support from the Spanish MINECO project MAT2017-83632-C3 and from the Basque Government through IT1245-19 project and M. G. G. postdoctoral fellowship. M. J. also acknowledges financial support from the Spanish Ministry of Economy and Competitiveness, through The “María de Maeztu” Programme for Units of Excellence in R&D (MDM-2014-0377) and from Universidad Autónoma de Madrid and Comunidad Autónoma de Madrid through the project SI1/PJI/2019-00055. J. P.-N., C. M. and J. M. D. T. acknowledge financial support from the Spanish Ministry of Economy and Competitiveness through Projects MAT2018-102627-T and MAT2017-82970-C2, and from the Aragon Regional Government (Construyendo Europa desde Aragón) through Project E13_20R, with European Social Fund funding. A grant to J. P.-N. was funded by the Ayuda para Contratos Predoctorales para la Formación de Doctores, Convocatoria Res. 05/06/15 (BOE 12/06/15) of the Secretaría de Estado de Investigación, Desarrollo e Innovación in the Subprograma Estatal de Formación of the Spanish Ministry of Economy and Competitiveness with the participation of the European Social Fund. K. G. acknowledges support by IKERBASQUE (the Basque Foundation for Science). The work of K. G. and O. C.-F. was supported by the Spanish Ministry of Economy and Competitiveness under the project FIS2016-78591-C3-3-R., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Plasmonic coupling in closed-packed ordered gallium nanoparticles

  • Catalán-Gómez, S.
  • Bran, Cristina
  • Vázquez Villalabeitia, Manuel
  • Vázquez Burgos, Luis
  • Pau, J.L.
  • Redondo-Cubero, A
Plasmonic gallium (Ga) nanoparticles (NPs) are well known to exhibit good performance in numerous applications such as surface enhanced fluorescence and Raman spectroscopy or biosensing. However, to reach the optimal optical performance, the strength of the localized surface plasmon resonances (LSPRs) must be enhanced particularly by suitable narrowing the NP size distribution among other factors. With this purpose, our last work demonstrated the production of hexagonal ordered arrays of Ga NPsby using templates of aluminium (Al) shallow pit arrays, whose LSPRs were observed in the VIS region. The quantitative analysis of the optical properties by spectroscopic ellipsometry confirmed an outstanding improvement of the LSPR intensity and full width at half maximum (FWHM) due to the imposed ordering. Here, by engineering the template dimensions, and therefore by tuning Ga NPs size, we expand the LSPRs of the Ga NPs to cover a wider range of the electromagnetic spectrum from the UV to the IR regions. More interestingly, the factors that cause this optical performance improvement are studied with the universal plasmon ruler equation,supported with discrete dipole approximation simulations. The results allow us to conclude that the plasmonic coupling between NPs originated in the ordered systems is the main cause for the optimized optical response., Te research is supported by the MINECO (CTQ2014-53334-C2-2-R, CTQ2017-84309-C2-2-R and MAT2016-76824-C3-1-R) and Comunidad de Madrid (P2018/NMT4349 and S2018/NMT-4321 NANOMAGCOST) projects. ARC acknowledges Ramón y Cajal program (under contract number RYC-2015-18047). We also would like to thank Dra. Nuria Gordillo for her technical assistance and fruitful discussions.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tuning domain wall dynamics by shaping nanowires cross-sections

  • Altbir, Dora
  • Fonseca, Jakson M.
  • Chubykalo-Fesenko, O.
  • Corona, Rosa M.
  • Carvalho-Santos, V. L.
  • Ivanov, Yurii P.
The understanding of the domain wall (DW) dynamics along magnetic nanowires is crucial for spintronic applications. In this work, we perform a detailed analysis of the transverse DW motion along nanowires with polygonal cross-sections. If the DW displaces under a magnetic field above the Walker limit, the oscillatory motion of the DW is observed. The amplitude, the frequency of oscillations, and the DW velocity depend on the number of sides of the nanowire cross-section, being the DW velocity in a wire with a triangular cross-section one order of magnitude larger than that in a circular nanowire. The decrease in the nanowire cross-section area yields a DW behavior similar to the one presented in a cylindrical nanowire, which is explained using an analytical model based on the general kinetic momentum theorem. Micromagnetic simulations reveal that the oscillatory behavior of the DW comes from energy changes due to deformations of the DW shape during the rotation around the nanowire., We thank the fnancial support from Financiamiento Basal AFB 180001 para Centros Científcos y Tecnológicos de Excelencia and proyecto FONDECYT 1200867. In Brazil, we thank CNPq (Grant numbers 401132/2016-1 and 302084/2019-3) and Fapemig for fnantial support. YPI acknowledges the support from the state task of the Ministry of Science and Higher Education of the Russian Federation No. 0657-2020-0005. O.C.-F. thanks the support from the Spanish MINECO under Grant MAT2016-76824-C3-1-R. R.C. acknowledge University of Santiago de Chile through Grant Dicyt 041831AD.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetization Ratchet in Cylindrical Nanowires

  • Bran, Cristina
  • Berganza, Eider
  • Fernández-Roldán, José A.
  • Palmero, Ester M.
  • Calle, Esther
  • Jaafar, Miriam
  • Pérez del Real, Rafael
  • Asenjo Barahona, Agustina
  • Chubykalo-Fesenko, O.
  • Vázquez Villalabeitia, Manuel
[EN] The unidirectional motion of information carriers such as domain walls in magnetic nanostrips is a key feature for many future spintronic applications based on shift registers. This magnetic ratchet effect has so far been achieved in a limited number of complex nanomagnetic structures, for example, by lithographically engineered pinning sites. Here we report on a simple remagnetization ratchet originated in the asymmetric potential from the designed increasing lengths of magnetostatically coupled ferromagnetic segments in FeCo/Cu cylindrical nanowires. The magnetization reversal in neighboring segments propagates sequentially in steps starting from the shorter segments, irrespective of the applied field direction. This natural and efficient ratchet offers alternatives for the design of three-dimensional advanced storage and logic devices., This work has been supported by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) undergrants MAT2016-76824-C3-1-R and FIS2016-78591-C3-3-Rand by the Regional Government of Madrid under project S2013/MIT2850 NANOFRONTMAG-CM. We acknowledgethe service from the MiNa Laboratory at IMN and fundingfrom CM (project SpaceTec, S2013/ICE2822), MINECO(project CSIC13-4E-1794), and EU (FEDER, FSE). J.M.acknowledges DAAD support during her stay at ICMM/CSIC.M.J. acknowledges a funding grant from Spanish MINECO under the MAT2015-73775-JIN research project. J.A.F.-R.acknowledges support from Spanish MINECO and FSE thoughfellowship BES-2014-068789
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stochastic vs. deterministic magnetic coding in designed cylindrical nanowires for 3D magnetic networks

  • Bran, Cristina
  • Saugar, Elías
  • Fernández-Roldán, José A.
  • Pérez del Real, Rafael
  • Asenjo Barahona, Agustina
  • Aballe, Lucía
  • Foerster, Michael
  • Fraile Rodríguez, A.
  • Palmero, Ester M.
  • Vázquez Villalabeitia, Manuel
  • Chubykalo-Fesenko, O.
[EN] Advances in cylindrical nanowires for 3D information technologies profit from intrinsic curvature that introduces significant differences with regards to planar systems. A model is proposed to control the stochastic and deterministic coding of remanent 3D complex vortex configurations in designed multilayered (magnetic/non-magnetic) cylindrical nanowires. This concept, introduced by micromagnetic simulations, is experimentally confirmed by magnetic imaging in FeCo/Cu multilayered nanowires. The control over the random/deterministic vortex states configurations is achieved by a suitable geometrical interface tilting of almost non-interacting FeCo segments with respect to the nanowire axis, together with the relative orientation of the perpendicular magnetic field. The proper design of the segments' geometry (e.g. tilting) in cylindrical nanowires opens multiple opportunities for advanced nanotechnologies in 3D magnetic networks., Spanish Ministry of Science and Innovation under Projects MAT2016-76824-C3-1-R, PID2019-108075RB-C31/ AEI / 10.13039/501100011033 and PGC2018-097789-B-I00 and the Regional Government of Madrid under Project S2018/NMT-4321 NANOMAGCOST-CM. LA and MF acknowledge project RTI2018-095303-B-C53., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetization pinning in modulated nanowires: from topological protection to the “corkscrew” mechanism

  • Fernández-Roldán, José A.
  • Pérez del Real, Rafael
  • Bran, Cristina
  • Vázquez Villalabeitia, Manuel
  • Chubykalo-Fesenko, O.
[EN] Diameter-modulated nanowires offer an important paradigm to design the magnetization response of 3D magnetic nanostructures by engineering the domain wall pinning. With the aim to understand its nature and to control the process, we analyze the magnetization response in FeCo periodically modulated polycrystalline nanowires varying the minor segment diameter. Our modelling indicates a very complex behavior with a strong dependence on the disorder distribution and an important role of topologically non-trivial magnetization structures. We demonstrate that modulated nanowires with a small diameter difference are characterized by an increased coercive field in comparison to the straight ones, which is explained by a formation of topologically protected walls formed by two 3D skyrmions with opposite chiralities. For a large diameter difference we report the occurrence of a novel pinning type called here the ¿corkscrew¿: the magnetization of the large diameter segment forms a skyrmion tube with a core position in a helical modulation along the nanowire. This structure is pinned at the constriction and in order to penetrate the narrow segments the vortex/skyrmion core size should be reduced., Spanish Ministry of Economy, Industry and Competitiveness (MINECO) under the grants MAT2016-76824-C3-1-R and FIS2016-78591-C3-3-R. J. A. F.-R. acknowledges support from MINECO and ESF though the fellowship BES-2014-068789, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic Configurations in Modulated Cylindrical Nanowires

  • Bran, Cristina
  • Fernández-Roldán, José A.
  • Pérez del Real, Rafael
  • Asenjo Barahona, Agustina
  • Chubykalo-Fesenko, O.
  • Vázquez Villalabeitia, Manuel
[EN] Cylindrical magnetic nanowires show great potential for 3D applications such as magnetic recording, shift registers, and logic gates, as well as in sensing architectures or biomedicine. Their cylindrical geometry leads to interesting properties of the local domain structure, leading to multifunctional responses to magnetic fields and electric currents, mechanical stresses, or thermal gradients. This review article is summarizing the work carried out in our group on the fabrication and magnetic characterization of cylindrical magnetic nanowires with modulated geometry and anisotropy. The nanowires are prepared by electrochemical methods allowing the fabrication of magnetic nanowires with precise control over geometry, morphology, and composition. Different routes to control the magnetization configuration and its dynamics through the geometry and magnetocrystalline anisotropy are presented. The diameter modulations change the typical single domain state present in cubic nanowires, providing the possibility to confine or pin circular domains or domain walls in each segment. The control and stabilization of domains and domain walls in cylindrical wires have been achieved in multisegmented structures by alternating magnetic segments of different magnetic properties (producing alternative anisotropy) or with non-magnetic layers. The results point out the relevance of the geometry and magnetocrystalline anisotropy to promote the occurrence of stable magnetochiral structures and provide further information for the design of cylindrical nanowires for multiple applications., Regional Government of Madrid under the framework of the project S2018/NMT-4321 NANOMAGCOST-CM and by the Spanish Ministry of Science and Innovation through the projects MAT2016-76824-C3-1-R and PID2019-108075RB-C31/AEI/10.13039/501100011033.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stepwise magnetization reversal of geometrically tuned in diameter Ni and FeCo bi-segmented nanowire arrays

  • Palmero, Ester M.
  • Méndez, Miguel
  • González, Silvia
  • Bran, Cristina
  • Vega, Víctor
  • Vázquez Sulleiro, Manuel
  • Prida, V. M.
Magnetization reversal processes of hexagonal dense arrays of bi-segmented Ni and Fe50Co50 nanowires consisting of two well defined diameters (45 and 80 nm) have been studied. The nanowires were grown inside of tailored pores of anodic alumina templates by combined anodization, atomic layer deposition (ALD) and electrodeposition techniques. The experiments have allowed to identify their two-step magnetization reversal process ascribed to the respective segments of different diameter. This is concluded from the differential susceptibility observed in the hysteresis loops, contrary to those for nanowires with homogeneous diameter. These results are also confirmed by the first-order reversal curve (FORC) distribution diagrams, where an elongation parallel to the interaction axis around two coercive field values is obtained, which is correlated to the difference in diameter of the two segments. This well-defined two-step magnetization reversal process through the nanowire diameter design is thought to be very useful for the advanced control of the remagnetization in arrays of magnetic multidomain systems., The authors acknowledge financial support from the Spanish Ministerio de Economía y Competitividad (MINECO) through the research Projects MAT2013-48054-C2-1-R, MAT2013-48054-C2-2-R, MAT2016-76824-C3-1-R and MAT2016-76824-C3-3-R. The scientific support from the SCTs of the University of Oviedo is also acknowledged., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Half-hedgehog spin textures in sub-100 nm soft magnetic nanodots

  • Berganza, E.
  • Jaafar, M.
  • Fernandez-Roldan, J.A.
  • Goiriena-Goikoetxea, M.
  • Pablo-Navarro, J.
  • Garcia-Arribas, A.
  • Guslienko, K.
  • Magen, C.
  • De Teresa, J.M.
  • Chubykalo-Fesenko, O.
  • Asenjo, A.
Topologically non-trivial structures such as magnetic skyrmions are nanometric spin textures of outstanding potential for spintronic applications due to their unique features. It is well known that Neel skyrmions of definite chirality are stabilized by the Dzyaloshinskii-Moriya exchange interaction (DMI) in bulk non-centrosymmetric materials or ultrathin films with strong spin-orbit coupling at the interface. In this work, we show that soft magnetic (permalloy) hemispherical nanodots are able to host three-dimensional chiral structures (half-hedgehog spin textures) with non-zero tropological charge. They are observed at room temperature, in absence of DMI interaction and they can be further stabilized by the magnetic field arising from the Magnetic Force Microscopy probe. Micromagnetic simulations corroborate the experimental data. Our work implies the existence of a new degree of freedom to create and manipulate complex 3D spin-textures in soft magnetic nanodots and opens up future possibilities to explore their magnetization dynamics.