Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 680
Encontrada(s) 7 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Electrochemical immunosensor for simultaneous determination of interleukin-1 beta and tumor necrosis factor alpha in serum and saliva using dual screen printed electrodes modified with functionalized doubleewalled carbon nanotubes

  • Sánchez Tirado, Esther
  • Salvo, Coral
  • González Cortés, Araceli
  • Yáñez-Sedeño Orive, Paloma
  • Langa, Fernando
  • Pingarrón Carrazón, José Manuel
Dual screen-printed carbon electrodes modified with 4-carboxyphenyl-functionalized double-walled carbon nanotubes (HOOC-Phe-DWCNTs/SPCEs) have been used as scaffolds for the preparation of electrochemical immunosensors for the simultaneous determination of the cytokines Interleukin-1b (IL-1b) and factor necrosis tumor a (TNF-a). IL-1b. Capture antibodies were immobilized onto HOOC-PheDWCNTs/SPCEs in an oriented form making using the commercial polymeric coating Mix&Go™. Sandwich type immunoassays with amperometric signal amplification through the use of poly-HRPstreptavidin conjugates and H2O2 as HRP substrate and hydroquinone as redox mediator were implemented. Upon optimization of the experimental variables affecting the immunosensor performance, the dual immunosensor allows ranges of linearity extending between 0.5 and 100 pg/mL and from 1 to 200 pg/mL for IL-1b and TNF-a, respectively, these ranges being adequate for the determination of the cytokines in clinical samples. The achieved limits of detection were 0.38 pg/mL (IL-1b) and 0.85 pg/mL (TNF-a). In addition, the dual immunosensor exhibits excellent reproducibility of the measurements, storage stability of the anti-IL-Phe-DWCNTs/SPCE and anti-TNF-Phe-DWCNTs/SPCE conjugates, and selectivity as well as negligible cross-talking. The dual immunosensor was applied to the simultaneous determination of IL-1b and TNF-a in human serum spiked at clinically relevant concentration levels and in real saliva samples.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Addition of fermented and unfermented grape skin in broilers’ diets: effect on digestion, growth performance, intestinal microbiota and oxidative stability of meat

  • Nardoia, María
  • Romero, Carlos
  • Brenes, Agustín
  • Arija Martín, Ignacio
  • Viveros Montoro, Agustín
  • Ruiz Capillas, C.
  • Chamorro Francisco, Susana
Grape skin is a source of polyphenols with antioxidant and antimicrobial properties. Little information is available regarding its application in animal feeding. The present study investigated the effect of inclusion of fermented (FS) and unfermented (UFS) grape skin at two different doses (30 g/kg, FS30 and UFS30, and 60 g/kg, FS60 and UFS60) and 200 mg/kg vitamin E (α-tocopheryl acetate) in a corn–soybean diet on growth performance, ileal protein digestibility, ileal and excreta total extractable polyphenols content and digestibility, intestinal microbiota and thigh meat oxidation in broiler chickens. Growth performance was depressed in chickens fed UFS and FS diets. A reduction in ileal protein digestibility was also observed in birds fed UFS, being this effect more pronounced in those fed 60 g/kg. The dietary inclusion of grape skin increased both ileal and excreta polyphenols contents, being higher in birds fed UFS than in those fed FS. Excreta moisture content increased in birds fed UFS and FS diets. No effect of dietary inclusion of grape skin was observed on ileal counts of lactic-acid bacteria and Clostridium, but UFS inclusion in the diet reduced ileal count of Escherichia coli as compared with FS dietary inclusion. After 7 days of refrigerated storage, values of thiobarbituric acid reactive substances (TBARS) were lower in chicken meat when grape skin was added in the diet at 60 g/kg instead of 30 g/kg, and meat from birds fed 60 g/kg of grape skin reached TBARS values similar to those of birds supplemented with vitamin E. In conclusion, high doses of grape skin polyphenols depressed growth performance and protein digestibility, and increased excreta moisture content. Unfermented grape skin contained more polyphenols than FS, and its inclusion in the diet led to higher ileal and excreta polyphenols contents and to a lower ileal count of E. coli. Furthermore, the antioxidant potential of the polyphenols present in grape skin was observed after 7 days of meat storage, with the dose of 60 g/kg of grape skin being as effective as vitamin E supplementation in maintaining oxidative stability of meat.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Characterization of Limnospira platensis PCC 9108 R-M and CRISPR-Cas systems, Caracterizacion de Limnospira platensis PCC 9108 R-M y los sistemas CrispR-Cas

  • Castillo López, María
  • Guevara Acosta, Flor Govinda
  • Baldanta Callejo, Sara
  • Suárez Rodríguez, Patricia
  • Agudo, Lucía
  • Nogales, Juan
  • Díaz Carrasco, Asunción
  • Arribas-Aguilar, Fernando
  • Pérez-Pérez, Julián
  • García, Jose Luis
  • Galán, Beatriz
  • Navarro Llorens, Juana María
The filamentous cyanobacterium Limnospira platensis, formerly known as Arthrospira platensis or spirulina, is one of the most commercially important species of microalgae. Due to its high nutritional value, pharmacological and industrial applications it is extensively cultivated on a large commercial scale. Despite its widespread use, its precise manipulation is still under development due to the lack of effective genetic protocols. Genetic transformation of Limnospira has been attempted but the methods reported have not been generally reproducible in other laboratories. Knowledge of the transformation defense mechanisms is essential for understanding its physiology and for broadening their applications. With the aim to understand more about the genetic defenses of L. platensis, in this work we have identified the restriction-modification and CRISPR-Cas systems and we have cloned and characterized thirteen methylases. In parallel, we have also characterized the methylome and orphan methyltransferases using genome-wide analysis of DNA methylation patterns and RNA-seq. The identification and characterization of these enzymes will be a valuable resource to know how this strain avoids being genetically manipulated and for further genomics studies.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Electrochemical immunosensor for sensitive determination of transforming growth factor (TGF) - β1 in urine

  • Sánchez Tirado, Esther
  • Martínez García, Gonzalo
  • González Cortés, Araceli
  • Yáñez-Sedeño Orive, Paloma
  • Pingarrón Carrazón, José Manuel
The first amperometric immunosensor for the quantification of TGF-β1, a cytokine proposed as a biomarker for patients having or at risk for renal disease, is described in this work. The immunosensor design involves disposable devices using carboxylic acid-functionalized magnetic microparticles supported onto screen-printed carbon electrodes and covalent immobilization of the specific antibody for TGF-β1 using Mix&Go polymer. A sandwich-type immunoassay was performed using biotin-anti-TGF and conjugation with peroxidase-labeled streptavidin (poly-HRP-Strept) polymer. Amperometric measurements were carried out at 0.20 V by adding hydrogen peroxide solution onto the electrode surface in the presence of hydroquinone as the redox mediator. The calibration plot allowed a range of linearity extending between 15 and 3000 pg/mL TGF-β1 which is adequate for the determination of the cytokine in plasma and urine. The limit of detection, 10 pg/mL, is notably improved with respect to those obtained with ELISA kits. The usefulness of the immunosensor for the determination of low TGF-β1 concentrations in real samples was evaluated by analyzing spiked urine at different pg/mL concentration levels.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Addition of exogenous enzymes to diets containing grape pomace: effects on intestinal utilization of catechins and antioxidant status of chickens

  • Chamorro Francisco, Susana
  • Viveros Montoro, Agustín
  • Rebolé Garrigós, Almudena
  • Arija Martín, Ignacio
  • Romero, Carlos
  • Álvarez, Inmaculada
  • Rey Muñoz, Ana Isabel
  • Brenes, Agustín
Grape pomace (GP) is a rich source of polyphenols with antioxidant capacity. An experiment was conducted to study the effect of GP phenolic compounds included at 5 and 10%, and the addition (individually or combined) of hydrolyzing enzymes (carbohydrase enzyme complex and tannase at 500 ppm) on intestinal utilization of catechins and antioxidant status in broiler chickens. A diet supplemented with 200 ppm of α-tocopheryl acetate was also used. Our findings demonstrate the capacity of chickens to digest the monomeric (catechin, epicatechin, gallic acid, and epicatechin-O-gallate) and dimeric (procyanidin B1 and procyanidin B2) catechins present in grape pomace. The addition of enzymes (mainly tannase) hydrolyzed the polymeric structures into smaller catechins, but also promoted a lower digestibility of the monomeric and dimeric catechins suggesting that polymeric structures might favour the intestinal utilization of these catechins. The intestinal accumulation of phenolic compounds generated with tannase and with 10% GP reversed the antimicrobial effect against Clostridium perfringens observed with 5% of GP. Grape pomace improved the antioxidant status of the bird, increasing the α-tocopherol and reducing the iron content on plasma, not affecting the plasma gluthatione. Enzymes modified the intestinal utilization of catechins but not additional protective effect was detected on any of the parameters analyzed to evaluate the antioxidant status.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Estimation of the melting threshold of Ti supersaturated Si using time resolved reflectometry and haze measurements

  • Montero Álvarez, Daniel
  • Caudevilla Gutiérrez, Daniel
  • Algaidy, Sari
  • García Hernansanz, Rodrigo
  • Suler, Andrej
  • Acosta Alba, Pablo
  • Kerdiles, Sébastien
  • Pastor Pastor, David
  • García Hemme, Eric
  • Roy, Francois
  • Olea Ariza, Javier
Hyperdoped or supersaturated semiconductors are gathering the attention of industry and research institutions due to their sub-bandgap photon absorption properties. In this study, two fast and non-invasive techniques, time-resolved reflectometry (TRR) and Haze Measurements, are applied to infer the melt and solidification regimes of Ti supersaturated 300 mm silicon wafers, aiming to ease the characterization process towards high volume manufacturing of supersaturated materials. Ti supersaturation is attained by using an ion implantation process with a dose 3 x 10(15) cm(-2), which amorphizes the surface. Crystalline quality is then recovered by means of a XeCl UV nanosecond laser annealing process. TRR technique is used to determine two different melting and solidification processes of the laser annealed implanted surface. A first brief, low temperature peak (alpha peak) is associated with the melting process of the amorphized surface, followed by a longer peak/plateau (beta (1) peak/plateau), linked to the melting process of the crystalline phase below the amorphized layer, at sufficiently high laser fluences. Haze technique is used to indirectly measure the crystalline quality after the solidification process of the laser-annealed surface. Atomic force microscopy measurements are used to obtain the surface roughness value and cross-section high resolution transmission electron microscopy micrographs to check crystalline quality.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrochemical fingerprint of archaeological lead silicate glasses from the voltammetry of microparticles approach

  • Doménech Carbó, Antonio
  • Villegas Broncano, María Ángeles
  • Martínez Ramírez, Sagrario
  • Martínez Pla, Betlem
  • Domenech Carbo, Mª Teresa|||0000-0003-3660-2161
[EN] The application of a solid-state electrochemical technique, voltammetry of microparticles (VMP), for studying archeological lead glass is described. Upon attachment to graphite electrodes immersed into aqueous acetate buffer, characteristic voltammetric profiles were obtained for submicrosamples of archeological glasses dated between the 9th and 19th centuries. Bivariate and multivariate chemometric analyses of the VMP data allowed us to characterize individual workshops/provenances which enabled a clear discrimination between soda-rich and potash-rich glasses. An analysis of the VMP data, combined by XRF, FESEM, AFM and ATR-FTIR and Micro-Raman spectroscopies, denoted the presence of Pb(IV) centers accompanying network-former and network-modifier Pb(II)., Financial support from the MINECO Projects CTQ2014-53736-C3-1-P, CTQ2014-53736-C3-2-P and MAT2015-65445-C2-2-R, which are supported with ERDF funds is gratefully acknowledged. Likewise financial support of the Comunidad de Madrid and structural funds of the EU through Programa Geomateriales 2 ref. S2013/MIT-2914 is acknowledged. The authors thank the Seccion de Investigacion Arqueologica Municipal de Valencia for kindly authorizing sampling to carry out this research. The authors also thank Dr. Jose Luis Moya Lopez and Mr. Manuel Planes Insausti (Microscopy Service of the Universitat Politecnica de Valencia) for their technical support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cucurbit[7]uril-stabilized gold nanoparticles as catalysts of the nitro compound reduction reaction

  • Blanco, Elias
  • Esteve-Adell, Iván
  • Casas, J.A.
  • Hernández, P.
  • Quintana, C.
  • Atienzar Corvillo, Pedro Enrique|||0000-0002-0356-021X
[EN] The catalytic performance of cucurbit[7]uril-protected gold nanoparticles is reported for the first time for the reductive degradation of the banned but still used antibacterial compound nitrofurantoin. The cucurbit[7]uril-protected gold nanoparticles were produced by Au(III) reduction by sodium borohydride and subsequent addition of cucurbit[7]uril as a ligand. Working in this way, 5.7 nm gold nanoparticles were obtained and characterised by spectrophotometric and high-resolution transmission electron microscopic techniques. For a 1 : 100 nitro compound : sodium borohydride molar ratio, a normalised pseudo-first order apparent constant of 0.27 L s(-1) m(-2) at 25 degrees C and an activation energy of 34 kJ mol(-1) were obtained. For comparative purposes, the reduction reaction of the pollutant 4-nitrophenol was also studied and an apparent kinetic constant of 0.12 L s(-1) m(-2) at 25 degrees C and an activation energy of 68 kJ mol-1 were obtained, data that, when compared with recently reported work, demonstrates that these nanoparticles are an efficient catalyst., The authors would like to thank the Comunidad Aut´onoma de Madrid (S2013/MIT-3029, NANOAVANSENS).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Toward chemical communication between nanodevices

  • Llopis-Lorente, Antoni|||0000-0002-6987-9506
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Diez-Sánchez, Paula
  • Sánchez, A.
  • Martinez-Ruiz, Paloma
  • Villalonga, R.
[EN] Although many nanodevices have been described in recent years, nanoparticles capable of communicating with each other have been barely reported. Traditional communication technologies cannot be applied on the nanoscale, but a potential approach to achieve this goal is to mimic how nature communicates by exchanging information using molecules. Based on these concepts, some examples using DNA, enzymes and small molecules for information processing, nanoparticles capable of modulating chemical communication between cells and nanoparticles that can communicate with each another have been reported. Communication between nanodevices may find applications in different areas and a number of future new results are envisioned in this research field. (C) 2017 Elsevier Ltd. All rights reserved., A. Llopis-Lorente is thankful to the La Caixa Banking Foundation for his PhD grant. The authors are grateful to the Spanish Government (MINECO Projects MAT2015-64139-C4-1, CTQ2014-58989-P, CTQ2015-71936-REDT and AGL2015-70235-C2-2-R) and the Generalitat Valenciana (Project PROMETEOII/2014/047). The authors also thank the Comunidad de Madrid (S2013/MIT-3029, Programme NANOAVANSENS) for support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diet management to effectively abate N2O emissions from surface applied pig slurry

  • Sánchez-Martín, L.
  • Beccaccia, A.
  • de Blas, C.
  • Sanz-Cobeña, A.
  • García-Rebollar, P.
  • Mardsen, K.A.
  • Chadwick, D.R.
  • Vallejo, A.
  • Estellés, F.|||0000-0001-6774-6075
[EN] Application of manure (urine and/or feces) to agricultural soils enhances emissions of gases such as nitrous oxide (N2O) and carbon dioxide (CO2). Some minor N compounds such as hippuric acid and benzoic acid present in urine can be controlled through diet manipulation to mitigate these emissions. The aim of this study was to evaluate how the inclusion of fibrous by-products in the diet of pigs affects hippuric and benzoic acid concentrations in the excreted urine/slurry, and their possible effect on N2O emissions following application of these manures to soil. Slurries were obtained from growing-finishing pigs fed five contrasting diets: a conventional diet (pig slurry control, PSC); and orange pulp and carob meal at a dietary fiber level of 75 or 150 g kg(-1) (OP-75; OP-150; CM-75; CM-150) and were then applied to mesocosms containing young ryegrass plants. A control treatment without slurry was also included. The N2O and CO2 emissions were measured using static chambers following slurry application, alongside measurements of soil ammonium (NH4), nitrate (NO3-), and dissolved organic carbon. Soils amended with slurries obtained from fibre by-products, OP and CM, decreased N2O emissions by 65 and 47%, respectively, compared with slurries obtained through a conventional pig diet. Benzoic acid was negatively correlated with N2O emission for slurries from OP diets, which had over double the hippuric acid content, and more than 1.8 times the benzoic acid content than the CM. However, this effect only occurred during the first week due to rapid degradation of this compound within soil. The possible toxic effect of benzoic acid did not appear to affect soil respiration, since a positive correlation was found. Results of a benzoic acid balance (considering both intake through feed and release through urine) indicated that the source of both acids were phenolic compounds (polyphenolic or lignin) present in the fibrous fraction. These results show that N2O emissions are more affected than CO2 by to compounds within urine/faeces that can be manipulated indirectly through the diet., The authors are grateful to the Spanish Ministry of Science and Innovation and the Autonomous Community of Madrid for their economic support through Projects AGL2011-30023, AGL2012-37815-CO5-01,AGL2015-64582-C3-3-R and the Agrisost Project S2013/ABI-2717. This study would not have been possible without technical assistance from the technicians and researchers at the Department of Agricultural Chemistry and Analysis of the Agronomy Faculty (Technical University of Madrid, UPM) especially Gemma Andreu Cadenas. We are also grateful to Dr. Pedro Aparicio for his support in determination of BA in feeds. The input from DRC and KAM contribute to the UK-China Virtual Joint Centre for Improved Nitrogen Agronomy (CINAg), funded by the Newton Fund via UK BBSRC/NERC (BB/N013468/1)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

In vitro caecal fermentation of carbohydrate-rich feedstuffs in rabbits as affected by substrate pre-digestion and donors&apos, diet

  • Ocasio-Vega, C.
  • Abad-Guamán, R.
  • Delgado, R.
  • Carabaño, R.
  • Carro, M.D.
  • García, Javier
[EN] The influence of substrate pre-digestion and donors’ diet on in vitro caecal fermentation of different substrates in rabbits was investigated. Eight crossbreed rabbits were fed 2 experimental diets containing either low (LSF; 84.0 g/kg dry matter [DM]) or high soluble fibre (HSF; 130 g/kg DM) levels. In vitro incubations were conducted using batch cultures with soft faeces as inoculum and four fibrous or fibre-derived, low-starch and low-protein substrates: D-cellobiose (CEL), sugar beet pectin (PEC), sugar beet pulp (SBP) and wheat straw (WS). Substrates in half of the cultures were subjected to a 2-step pepsin/pancreatin in vitro digestion without filtration, and the whole residue (soluble, insoluble and added enzymes) was incubated at 39°C. Gas production was measured until 144 h, and volatile fatty acid (VFA) production at 24 h incubation was determined. Cultures without substrate (blanks) were included to correct gas production values for gas released from endogenous substrates and added enzymes. Pre-digestion had no influence on in vitro gas production kinetic of WS, and only reduced the time before gas production begins (lag time; by 31%; P=0.042) for SBP, but for both substrates the pre-digestion decreased the molar proportion of acetate (by 9%; P≤0.003) and increased those of propionate and butyrate (P≤0.014). For CEL, the pre-digestion increased the gas and total VFA production (by 30 and 114%), shortened the lag time (by 32%), and only when it was combined with LSF inoculum 38 percentage units of acetate were replaced by butyrate (P≤0.039). Treatments had a minor influence on in vitro fermentation traits of SBP pectin. The results showed that the pre-digestion process influenced the in vitro caecal fermentation in rabbits, but the effects were influenced by donors’ diet and the incubated substrate. Pre-digestion of substrate is recommended before conducting in vitro caecal fermentations. The level of soluble fibre in the donors’ diet also influenced the in vitro caecal fermentation, but its effect depended on the type of substrate., Funding from the Spanish Ministry of Economy and Competitiveness (Projects AGL2011-23885 and AGL2011-22628) and the Comunidad Autónoma de Madrid (CAM; Project MEDGAN ABI-2913) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Towards smart open dynamic fleets

  • Billhardt, Holger
  • Fernández, Alberto
  • Lujak, Marin
  • Ossowski, Sascha
  • Paz, Juan F. De
  • Hernández, Josefa Z.
  • Julian, Vicente|||0000-0002-2743-6037
Nowadays, vehicles of modern fleets are endowed with advanced devices that allow the operators of a control center to have global knowledge about fleet status, including existing incidents. Fleet management systems support real-time decision making at the control center so as to maximize fleet perform‐ ance. In this paper, setting out from our experience in dynamic coordination of fleet management systems, we focus on fleets that are open, dynamic and highly autonomous. Furthermore, we propose how to cope with the scalability problem as the number of vehicles grows. We present our proposed architecture for open fleet management systems and use the case of taxi services as example of our proposal., Work partially supported by Spanish Government through the projects iHAS (grant TIN2012-36586-C03) and SURF (grant TIN2015-65515-C4-X-R), the Autonomous Region of Madrid through grant S2013/ICE-3019 (“MOSI-AGIL-CM”, cofunded by EU Structural Funds FSE and FEDER) and URJC-Santander (30VCPIGI15).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gap Waveguide Technology for Millimeter-Wave Antenna Systems

  • Rajo Iglesias, Eva
  • Uz Zaman, Ashraf
  • Ferrando-Rocher, Miguel|||0000-0003-4098-7180
[EN] Millimeter-wave communication systems require many innovative antennas adapted for future application scenarios such as the upcoming 5G cellular networks. Due to the strong path loss in free space at the millimeter-wave frequency range, high gain and low-cost antennas are in great demand. Also, advanced features such as multi-beam for multiple user, dual-polarization, or even complete phased arrays with enormous degrees of freedom in beamforming are some of the key research lines for antenna designers nowadays. In this article an overview of a new type of family of low-loss antennas and components based on the recently developed gap waveguide technology is presented. With the advent of new millimeter-wave applications, this low-cost and low-loss waveguide technology can be considered as a good candidate to be used as the core RF building block., This work has been partly funded by the Spanish Government through projects TEC2013-44019-R, TEC2016-79700-C2-1-R and TEC2016-79700-C2-2-R and by Madrid Regional Government under the project S2013/ICE-3000.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Taxi dispatching strategies with compensations

  • Billhardt, Holger
  • Fernandez Gil, Alberto
  • Ossowski, Sascha
  • Bajo, Javier
  • Palanca Cámara, Javier|||0000-0002-6209-9603
[EN] Urban mobility efficiency is of utmost importance in big cities. Taxi vehicles are key elements in daily traffic activity. The advance of ICT and geo-positioning systems has given rise to new opportunities for improving the efficiency of taxi fleets in terms of waiting times of passengers, cost and time for drivers, traffic density, CO2 emissions, etc., by using more informed, intelligent dispatching. Still, the explicit spatial and temporal components, as well as the scale and, in particular, the dynamicity of the problem of pairing passengers and taxis in big towns, render traditional approaches for solving standard assignment problem useless for this purpose, and call for intelligent approximation strategies based on domain-specific heuristics. Furthermore, taxi drivers are often autonomous actors and may not agree to participate in assignments that, though globally efficient, may not be sufficently beneficial for them individually. This paper presents a new heuristic algorithm for taxi assignment to customers that considers taxi reassignments if this may lead to globally better solutions. In addition, as such new assignments may reduce the expected revenues of individual drivers, we propose an economic compensation scheme to make individually rational drivers agree to proposed modifications in their assigned clients. We carried out a set of experiments, where several commonly used assignment strategies are compared to three different instantiations of our heuristic algorithm. The results indicate that our proposal has the potential to reduce customer waiting times in fleets of autonomous taxis, while being also beneficial from an economic point of view., This work was supported by the Autonomous Region of Madrid (grant "MOSI-AGIL-CM" (S2013/ICE-3019) co-funded by EU Structural Funds FSE and FEDER), project "SURF" (TIN2015-65515-C4-X-R (MINECO/FEDER)) funded by the Spanish Ministry of Economy and Competitiveness, and through the Excellence Research Group GES2ME (Ref. 30VCPIGI05) co-funded by URJC and Santander Bank.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamic slicing of concurrent specification languages

  • Llorens Agost, María Luisa|||0000-0002-2790-0055
  • Oliver Villarroya, Javier|||0000-0002-1169-1260
  • Silva, Josep|||0000-0001-5096-0008
  • Tamarit Muñoz, Salvador
[EN] Dynamic slicing is a technique to extract the part of the program (called slice) that influences or is influenced, in a particular execution, by a given point of interest in the source code (called slicing criterion). Since a single execution is considered, the technique often uses a trace of this execution to analyze data and control dependencies. In this work we present the first formulation and implementation of dynamic slicing in the context of CSP. Most of the ideas presented can be directly applied to other concurrent specification languages such as Promela or CCS, but we center the discussion and the implementation on CSP. We base our technique on a new data structure to represent CSP computations called track. A track is a data structure which represents the sequence of expressions that have been evaluated during the computation, and moreover, it is labeled with the location of these expressions in the specification. The implementation of a dynamic slicer for CSP is useful for debugging, program comprehension, and program specialization, and it is also interesting from a theoretical perspective because CSP introduces difficulties such as heavy concurrency and non-determinism, synchronizations, frequent absence of data dependence, etc. © 2016 Elsevier B.V. All rights reserved, This work has been partially supported by the EU (FEDER) and the Spanish Ministerio de Economia y Competitividad under Grant TIN2013-44742-C4-1-R and by the Generalitat Valenciana under Grant PROMETEOII/2015/013 (SmartLogic). Salvador Tamarit was partially supported by Madrid regional projects N-GREENS Software-CM (S2013/ICE-2731), and by European Union project POLCA (STREP FP7-ICT-20133.4 610686).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Luminescence Dynamics of Silica-Encapsulated Quantum Dots During Optical Trapping

  • Rodríguez-Rodríguez, H.
  • Acebrón, M.
  • Juárez, B.H.
  • Arias-Gonzalez, J. R.|||0000-0001-6802-0874
[EN] The trade-off between photobrightening and photobleaching controls the emission stability of colloidal quantum dots. This balance is critical in optical trapping configurations, where irradiances that confine and simultaneously excite the nanocrystals in the focal region cannot be indefinitely lowered. In this work, we studied the photobrightening and bleaching behaviors of two types of silica-encapsulated quantum dots excited upon two-photon absorption in an optical trap. The first type consists of alloyed CdSeZnS quantum dots covered with a silica shell. We found that the dynamics of these as-prepared architectures are similar to those previously reported for bare surface-deposited quantum dots, where thousands of times smaller irradiances were used. We then analyzed the same quantum dot systems treated with an extra intermediate sulfur passivating shell for the better understanding of the surface traps influence in the temporal evolution of their emission in the optical trap. We found that these latter systems exhibit better homogeneity in their photodynamic behavior compared to the untreated ones. These features strengthen the value of quantum dot preparations in optical manipulation as well as for applications where both long and maximal emission stability in physiological and other polar media are required., The authors thank A. Blanco and D. Granados for fruitful discussion and S. de Lorenzo for technical help. H.R-R. is supported by an FPI-UAM fellowship and M. A. by a contract from Fundacion IMDEA Nanociencia. The research leading to these results has received funding from the Spanish Ministry of Economy and Competitiveness (grant numbers MAT2015-71806-R and FIS2015-67367-C2-1-P), from Comunidad de Madrid (S2013/MIT-2740) and from UAM-Banco Santander (CEAL-AL/2015-15).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Simulation Study of the Effect of Decreasing Truck Traffic Flow on Safety on Almeria-Barcelona Corridor

  • Dadashova, Bahar
  • Arenas Ramirez, Blanca
  • González Fernandez, Camino
  • Aparicio Izquierdo, Francisco
[EN] In this paper the effect of truck traffic on road safety has been analyzed through simulation study. The main objective of the study is to quantify the effect of the decreasing average annual daily traffic of heavy duty vehicles (trucks) on road safety. As the road safety indicators the frequency road accidents is considered. The data used in the study were collected from one of the most crowded routes in Spain which connects Almeria (south-east) with Barcelona (northeast). The observed data covers year 2010 and were classified into 2 road types: dual carriageways and toll roads. The estimation was carried out using negative binomial model and Markov Chain Monte Carlo simulation. Using the estimation results new traffic scenarios were proposed where the traffic flow is assumed to change its values. A total of 33 scenarios were proposed and new accidents data were generated through MCMC sampling. The comparison of the simulated and observed accident data shows that the effect of decreasing truck traffic flow could meliorate road safety in the route. The simulation tool could be applied to evaluate the effects of freight modal shift from road to rail., This work has been carried out in the framework of the MODALTRAM - TRA2011- 28647-C02-01 Research Project "Development of an integrated methodology for the assessment of effects on Safety and Environment, for the road and rail modal shift", of the Spanish National Research Plan 2011-2014, Ministry of Economy and Competitiveness (MINECO). The authors would also like to thanks the Community of Madrid, that contributed to this work through the SEGVAUTO-TRIES-CM (S2013-MIT2713) Programme.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Capítulo o parte de un libro (BookPart)

Matlab-based tool for drainage network ordering by Horton and Hack hierarchies, Herramienta diseñada en Matlab para la ordenación de redes de drenaje por las jerarquías de Horton y Hack

  • Pastor-Martín, Candela
  • Antón, Loreto
  • Fernández-González, Carlos
[EN] This work presents a new MATLAB-based tool designed for network extraction and drainage network orderings by Horton and Hack hierarchies. Most GIS software offers only topological network orderings, based on joining segments, such as Stahler or Shreve, providing segments between junctions but not entire streams. Differently, Hack and Horton orderings allow organizing a drainage network in a hierarchy, identifying the parent segment over the child segment, giving as a result a drainage network where the value of a river remains unchanged from the mouth upstream to the headwater, allowing extracting entire streams. Horton and Hack hierarchies ease the interpretation of a drainage system compared to Strahler and Shreve. To extract the drainage network, this tool uses TopoToolbox 2 functions, to compute the prior steps of the channel network extraction and channel network ordering processes, and develops new functions. To sort a network, this tool allows selecting the parameter that defines the network hierarchy. This parameter is the socalled hierarchy attribute and could be the distance upstream, which refers to the distance between a junction upstream to the headwater, or the upstream accumulation, which is the accumulation at the junction. In addition to these mandatory parameters, the tool offers a set of optional parameters which turns it into a competitive alternative to generate a highly tailored ordered drainage network. The continuous channel network provided by the tool facilitates the use of other multiple applications for landscape analysis, such as the extraction longitudinal profiles or basin analysis through geomorphic indices., [ES] Este trabajo presenta una nueva herramienta diseñada en MATLAB para la extracción y ordenación de redes de drenaje por las jerarquías de Horton y Hack. La mayoría de software GIS ofrece sólo ordenaciones topológicas de redes, basadas en la unión de segmentos, como las ordenaciones de Stahler o Shreve, que proveen segmentos entre puntos de confluencia pero no canales completos. En cambio, las ordenaciones de Hack y Horton permiten organizar una red de drenaje en una jerarquía, identificando el segmento primario sobre el segmento secundario, dando como resultado una red de drenaje donde el valor de un río permanece inalterado desde la desembocadura aguas arriba hasta la cabecera. Las ordenaciones de Horton y Hack facilitan la interpretación de un sistema de drenaje comparado con Strahler y Shreve. Para extraer la red de drenaje, esta herramienta utiliza funciones de TopoToolbox 2 para calcular los pasos previos de los procesos de extracción y ordenación de la red y además desarrolla nuevas funciones. Para ordenar la red, esta herramienta permite seleccionar el parámetro que define la jerarquía de la red. Este parámetro es el llamado atributo de jerarquía que puede ser la distancia aguas arriba, que se refiere a la distancia desde el punto de confluencia a la cabecera, o la acumulación ascendente, que es la acumulación en el punto de confluencia. Además de estos parámetros obligatorios, la herramienta ofrece un conjunto de parámetros opcionales que la convierten en una alternativa competitiva para generar una red de drenaje ordenada personalizada. Esta herramienta permite generar de una red fluvial continua que es requerida en otras múltiples aplicaciones como puede ser para la extracción perfiles longitudinales y/o el análisis de cuencas a través de índices geomórficos., This work was supported by MEC under Grant PEJ2014-A-93258; by UNED under Grant GID2016-19; and it was partially funded by MITE under Grant CGL2014- 59516-P and CARESOIL S2013/MAE-2739 projects.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robots Hiper-Redundantes: Clasificación, Estado del Arte y Problemática, Hyper-Redundant Robots: Classification, State-of-the-Art and Issues

  • Martín Barrio, Andrés
  • Terrile, Silvia
  • Barrientos, Antonio
  • del Cerro, Jaime
[ES] Los robots hiper-redundantes son aquellos que tienen un número muy elevado de grados de libertad. En su uso cotidiano, la redundancia es referida para indicar una repetición o un uso excesivo de un concepto. En el campo de la robótica, la redundancia puede ofrecer numerosos beneficios frente a los robots convencionales. Los robots hiper-redundantes poseen una mayor habilidad para sortear obstáculos, son tolerantes a fallos en algunas de sus articulaciones y también pueden ofrecer ventajas cinemáticas. En este artículo se presentan los conceptos generales para entender este tipo de robots, así como una clasificación de los mismos, su potencial, su problemática y su evolución a lo largo de la historia., [EN] Hyper-redundant robots are characterized by having a high number of degrees of freedom. The word redundant is commonly used to mean a repetition or excess of a concept. In the robotics scope, redundancy offers numerous advantages against traditional robots. Hyper-redundant robots provide better skills to avoid obstacles, they are fault-tolerant in some of their joints and exhibit kinematic advantages. This article presents general concepts to understand this kind of robots as well as a classification, their potential, drawbacks and an analysis of their evolution throughout their history., Este trabajo es resultado de las actividades de investigación llevadas a cabo en el Centro de Automática y Robótica (CARUPM-CSIC) de la Universidad Politécnica de Madrid (España), en el seno del grupo de investigación de Robótica y Cibernética (RobCib). Las actividades se enmarcan en los proyectos RoboCity2030-III-CM (Robótica aplicada a la mejora de la calidad de vida de los ciudadanos. Fase III; S2013/MIT-2748) y en el proyecto DPI2014-56985-R (Protección Robotizada de Infraestructuras Críticas) financiado por el Ministerio de Economía y Competitividad del Gobierno de España.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Coordinating open fleets. A taxi assignment example

  • Billhardt, Holger
  • Fernández, Alberto
  • Lujak, Marin
  • Ossowski, Sascha
  • De Paz, Juan F.
  • Hernandez, Josefa Z.
  • Julian, Vicente|||0000-0002-2743-6037
[EN] Nowadays, vehicles of modern fleets are endowed with advanced devices that allow the operators of a control center to have global knowledge about fleet status, including existing incidents. Fleet management systems support real-time decision making at the control center so as to maximize fleet performance. In this paper, setting out from our experience in dynamic coordination of fleet management systems, we focus on fleets that are open, dynamic and highly autonomous. Furthermore, we propose how to cope with the scalability problem as the number of vehicles grows. We present our proposed architecture for open fleet management systems and use the case of taxi services as example of our approach. We carried out some experiments, which showed our proposed algorithm outperform the most common assignment method both in waiting times of clients and taxi costs., Work partially supported by Spanish Government through the projects iHAS (grant TIN2012-36586-C03 MINECO) and SURF (grant TIN2015-65515-C4-X-R MINECO/FEDER, UE), the Autonomous Region of Madrid through grant S2013/ICE-3019 ("MOSI-AGIL-CM", co-funded by EU Structural Funds FSE and FEDER) and URJC-Santander (30VCPIGI15).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Dynamic Slicing of CSP via Tracking

  • Llorens Agost, María Luisa|||0000-0002-2790-0055
  • Oliver Villarroya, Javier|||0000-0002-1169-1260
  • Silva, Josep|||0000-0001-5096-0008
  • Tamarit Muñoz, Salvador
Dynamic slicing is a technique to extract the part of the program (called slice) that influences or is influenced, in a particular execution, by a given point of interest in the source code (called slicing criterion). Since a single execution is considered, the technique often uses a trace of this execution to analyze data and control dependencies. In this work we present the first formulation and implementation of dynamic slicing in the context of CSP. The implementation of a dynamic slicer for CSP is useful for debugging, program comprehension, and program specialization, and it is also interesting from a theoretical perspective because CSP introduces difficulties such as heavy concurrency and non-determinism, synchronizations, frequent absence of data dependence, etc. We base our technique on a new data structure to represent CSP computations called track., This work has been partially supported by the EU (FEDER) and the Spanish Ministerio de Economía y Competitividad (Secretaría de Estado de Investigación, Desarrollo e Innovación) under grant TIN2013-44742-C4-1-R (CAVI-ROSE) and by the Generalitat Valenciana under grant PROMETEOII/2015/013. Salvador Tamarit was partially supported by EU FP7-ICT-2013.3.4 project 610686 POLCA, Comunidad de Madrid project S2013/ICE-2731 N-Greens Software and MINECO Projects TIN2012-39391-C0-03 and TIN2012-39391-C04-04 (StrongSoft).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermally-activated shape memory effect on biodegradable nanocomposites based on PLA/PCL blend reinforced with hydroxyapatite

  • Peponi, Laura
  • Sessini, V.
  • Arrieta, Marina Patricia
  • Navarro-Baena, Iván
  • Dominici, F.
  • Torre, L.
  • Tercjak, Agnieszka
  • López García, Daniel
  • Kenny, J.M.
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Giménez Torres, Enrique|||0000-0002-6330-0209
[EN] In this work, the effect of the addition of different amount of nanosized hydroxyapatite (nHA) on the shape memory behavior of blends based on poly (lactic acid) (PLA) and poly (epsilon-caprolactone) (PCL) has been studied. In particular PLA/PCL blend with 70 wt % PLA has been reinforced with 0.5, 1 and 3 wt % nHA. Moreover, the relationship between the morphology and the final properties of the nanocomposites has been investigated by field emission scanning electron microscopy, confocal Raman spectroscopy and atomic force microscopy. In particular, PeakForce has been used to study quantitative nanomechanical properties of the multifunctional materials leading to conclusion that nHA increase the phase separation between PLA and PCL as well as act as reinforcements for the PCL-rich phase of the nanocomposites. Furthermore, excellent thermally-activated shape memory response has been obtained for all the nanocomposites at 55 degrees C. Finally, the disintegration under composting conditions at laboratory scale level was studied in order to confirm the biodegradable character of these nanocomposites. Indeed, these materials are able to be used for biomedical issues as well as for packaging applications where both thermally-activated shape memory effect and biodegradability are requested., Authors thank the Spanish Ministry of Economy, Industry and Competitiveness, MINEICO, (MAT2017-88123-P) and the Regional Government of Madrid (S2013/MIT-2862) for the economic support. M.P.A. and L.P. acknowledge the Juan de la Cierva (FJCI-2014-20630) and Ramon y Cajal (RYC-2014-15595) contracts from the MINEICO, respectively. The authors also thanks CSIC for the I-Link project (I-Link1149).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradable nanocomposites based on poly(ester-urethane) and nanosized hydroxyapatite: Plastificant and reinforcement effects

  • NAVARRO-BAENA, IVÁN
  • Arrieta, Marina Patricia
  • Sonseca Olalla, Agueda
  • Torre, Luigi
  • López, Daniel
  • Kenny, Jose Mª
  • PEPONI, LAURA
  • Giménez Torres, Enrique|||0000-0002-6330-0209
The processing and characterization of biodegradable nanocomposites based on poly(ester-urethane) reinforced with different amounts (0.5, 1 and 3 wt %) of nanosized hydroxyapatite (nHA) are reported. The selected poly(ester-urethane) was synthesized starting from a tri-block copolymer based on poly(epsilon-caprolactone) (PCL) and poly(L-lactic acid) (PLLA). The nanocomposites were prepared by extrusion and by press molding. Several techniques were applied to investigate the properties of the nanocomposites. Electron microscopy revealed that the poly(ester-urethane) matrix is able to phase separate and that the addition of well-dispersed nanofillers modifies the dimension of the segregated phase. The thermal stability of the PU matrix, regulated by the PLLA block, decreased when low contents of nHA (0.5 and 1 wt %) were added, even if the thermal stability of the PCL-block was increased for each nHA amount. The good mechanical response of the nanocomposites confirmed the absence of agglomerates in the dispersion of the nanofillers in the polymeric matrix. The nHA presence also increased the surface hydrophilicity. Furthermore, rheology measurements, mechanical and thermal tests demonstrated the different behavior induced by the addition of nHA in different amounts. In fact, nHA acts as plasticizer at low concentrations (0.5, 1 wt %) and as reinforcement at a higher nHA amount (3 wt %). In vitro degradation tests were performed using a phosphate buffer solution. The results reported here are relevant for the development of nanocomposites based on a biodegradable and biocompatible polymeric matrix reinforced with small amounts of biocompatible nanofillers for different applications, especially in the biomedical field. (C) 2015 Elsevier Ltd. All rights reserved., We are indebted to the Spanish Ministry of Science and Innovation (MICINN) for their economic support of this research (MAT2013-48059-C2-1-R and MAT2014-55778-REDT) as well as the Regional Government of Madrid (S2013/MIT-2862). LP acknowledges also, the support of a JAEDoc grant from CSIC cofinanced by FSE. We thank the technical support of Prof. Juan Lopez Martinez from Universitat Politecnica de Valencia (Spain) for his assistance with water contact angle measurements, as well as Marco Rallini and Franco Dominici from the STM group of the University of Perugia for FE-SEM photographs and microextruder blending, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Survey of Algorithmic Debugging

  • Caballero, Rafael
  • Riesco, Adrián
  • Silva, Josep|||0000-0001-5096-0008
[EN] Algorithmic debugging is a technique proposed in 1982 by E. Y. Shapiro in the context of logic programming. This survey shows how the initial ideas have been developed to become a widespread debugging schema ftting many diferent programming paradigms and with applications out of the program debugging feld. We describe the general framework and the main issues related to the implementations in diferent programming paradigms and discuss several proposed improvements and optimizations. We also review the main algorithmic debugger tools that have been implemented so far and compare their features. From this comparison, we elaborate a summary of desirable characteristics that should be considered when implementing future algorithmic debuggers., This work has been partially supported by the EU (FEDER) and the Spanish Ministerio de Economia y Competitividad under grant TIN2013-44742-C4-1-R, TIN2016-76843-C4-1-R, StrongSoft (TIN2012-39391-C04-04), and TRACES (TIN2015-67522-C3-3-R) by the Generalitat Valenciana under grant PROMETEO-II/2015/013 (SmartLogic) and by the Comunidad de Madrid project N-Greens Software-CM (S2013/ICE-2731).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

On the use of many-core machines for the acceleration of a mesh truncation technique for FEM

  • Belloch Rodríguez, José Antonio
  • Amor-Martin, Adrian
  • García-Donoro, Daniel
  • Garcia-Castillo, Luis E.
  • Martínez Zaldívar, Francisco José|||0000-0002-7845-6273
[EN] Finite element method (FEM) has been used for years for radiation problems in the field of electromagnetism. To tackle problems of this kind, mesh truncation techniques are required, which may lead to the use of high computational resources. In fact, electrically large radiation problems can only be tackled using massively parallel computational resources. Different types of multi-core machines are commonly employed in diverse fields of science for accelerating a number of applications. However, properly managing their computational resources becomes a very challenging task. On the one hand, we present a hybrid message passing interface + OpenMP-based acceleration of a mesh truncation technique included in a FEM code for electromagnetism in a high-performance computing cluster equipped with 140 compute nodes. Results show that we obtain about 85% of the theoretical maximum speedup of the machine. On the other hand, a graphics processing unit has been used to accelerate one of the parts that presents high fine-grain parallelism., This work has been financially supported by TEC2016-80386-P, TIN2017-82972-R, CAM S2013/ICE-3004 projects and "Ayudas para contratos predoctorales de Formacion del Profesorado Universitario FPU".
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of inoculum type (ileal, caecal and faecal) on the in vitro fermentation of different sources of carbohydrates in rabbits

  • Abad-Guamán, Rodrigo
  • Larrea-Dávalos, Jose Antonio
  • Carabaño, Rosa
  • García, Javier
  • Carro, Maria Dolores
[EN] Two in vitro experiments were performed to analyse the fermentative potential of ileal content, caecal content, soft faeces and hard faeces from adult rabbits. Experiment 1 evaluated 3 doses (0.5, 1.0 and 2.0 g fresh digesta/g substrate dry matter [DM]) of ileal and caecal digesta as inoculum in 28 h-incubations. Two ileal and 2 caecal inocula were obtained, each by pooling the ileal or caecal digesta of 2 adult rabbits. Pectin from sugar beet pulp (SBP) and the insoluble residue obtained after a 2-step in vitro pre-digestion of SBP and wheat straw were used as substrates. The 0.5 dose produced the lowest (P<0.05) amount of gas at 28 h, with no differences (P>0.05) between the 1.0 and 2.0 doses (44.9, 51.6 and 53.8 mL/g substrate DM, respectively; values averaged across inocula and substrates). Experiment 2 evaluated two doses of ileal inoculum (1 and 1.5 g fresh digesta/g substrate DM) and compared ileal digesta, caecal digesta, soft faeces and hard faeces as inoculum for determining in vitro gas production (144-h incubations) of the 3 substrates used in Experiment 1 and wheat starch. Three inocula of each type were obtained, each by pooling either digesta or faeces from 3 rabbits. There were no differences (P>0.05) between the 2 ileal doses tested in gas production parameters, and therefore the 1.0 dose was selected for further ileal fermentations. Starch and pectin showed similar (P>0.05) values of gas production rate and maximal gas production rate when they were fermented with caecal digesta (0.038 vs. 0.043%/h, and 13.7 vs. 15.2 mL/h, respectively), soft (0.022 vs. 0.031%/h, and 9.97 vs. 9.33 mL/h) and hard faeces (0.031 vs. 0.038%/h, and 13.6 vs. 10.8 mL/h), and values were higher than those for SBP and wheat straw; in contrast, values for starch and pectin differed with the ileal inoculum (0.046 vs. 0.024%/h, and 18.4 vs. 6.60 mL/h). Both ileal and caecal gas production parameters were well correlated with those for hard and soft faeces inocula, respectively (r≥0.77; P≤0.040). The ileal inoculum showed a relevant fermentative potential, but lower than that of caecal digesta and soft and hard faeces for all substrates except wheat starch., Funding from the Spanish Ministry of Economy and Competitiveness (Project AGL2011-22628) and the Comunidad Autónoma de Madrid (CAM; Project MEDGAN ABI-2913) is gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Entorno Docente Universitario para la Programación de los Robots, Academic framework for teaching robot programming at university

  • Cañas Plaza, José María
  • Martín Florido, Alberto
  • Perdices García, Eduardo
  • Rivas Montero, Francisco
  • Calvo Palomino, Roberto
[ES] Se presenta un entorno docente de robótica universitaria orientado al aprendizaje práctico. Es software libre, multiplataforma (Linux, Windows, MacOS) y hace énfasis en la programación de la inteligencia de los robots. Consta de una colección de prácticas variadas, cercanas a las aplicaciones robóticas que están llegando a la sociedad recientemente (coches autónomos, drones, aspiradoras...).Utiliza el simulador Gazebo como referencia y Python como lenguaje. Para cada práctica se ha programado una aplicación académica que realiza tareas auxiliares como la interfaz gráfica, la conexión con sensores y actuadores concretos, la temporización, etc. y aloja al código del estudiante, que así se concentra en los algoritmos de percepción y control. Cada aplicación está formada por una parte específica preparada, que queda oculta, y el código del estudiante, que simplemente rellena un sencillo fichero plantilla con la lógica del robot. Se ha utilizado con éxito en varios cursos de grado, de máster y cursos de introducción a la robótica., [EN] This paper presents a framework for teaching robotics at engineering university degrees in a practical way. It is open source, multiplatform (Linux, Windows, MacOS) and emphasizes the programming of the robot intelligence. It consists of a collection of exercises of several types, which are similar to the new robotic applications (autonomous vehicles, drones, vacuum cleaners...). It uses the Gazebo simulator and the Python programming language. For each exercise an academic application has been created which performs all the auxiliary tasks like graphical interface, connection to the sensors and actuators, timing of the code, etc. and hosts the student’s code, who can focus on the perception and control algorithms. Each academic application combines an infrastructure part, which it is provided and remains hidden, and the student part, who simply fills a form file with the robot logic for such exercise. It has been successfully used in several subjects at engineering degree, master and robotics introductory courses., Este trabajo ha sido financiado parcialmente por la Comunidad de Madrid a través del proyecto RoboCity2030-III ((S2013/MIT-2748) y por el Ministerio de Economía y Competitividad de España a través del proyecto RETOGAR (TIN2016-76515-R). Los autores agradecen a Google la financiación al proyecto JdeRobot en sus convocatorias Google Summer of Code de 2015 y 2017.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The impact of Flipped Classroom on the motivation and learning of students in Operations Management, El impacto del flipped classroomen la motivación y en el aprendizaje de los estudiantes en la asignatura Dirección de Operaciones

  • Díaz Garrido, Eloísa
  • Martín-Peña, María Luz
  • Sánchez-López, José María
[EN] The objective of this work is to analyze the effectiveness of the Flipped Classroom methodology in the discipline of Operations Management, analyzing for this the motivation of the students and their learning results in terms of the acquisition of skills and qualifications obtained. Specifically, a comparative analysis is carried out with two teaching groups, having applied the methodology of Flipped Classroom only in one of them., Esta investigación ha sido parcialmente financiada por el Gobierno de la Comunidad de Madrid bajo el proyecto SICOMORo-CM (S2013/ICE-3006), por el proyecto ELASTIC (TIN2014-52938-C2-1-R), financiado por el Ministerio de Ciencia e Innovación del Gobierno de España y por el Grupo de Excelencia Investigadora en Service Science, Management and Engineering-GES2ME (Ref. Orgánica 30VCPIGI05) cofinanciado por la Universidad Rey Juan Carlos y el Banco Santander.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Runtime verification in Erlang by using contracts

  • Fredlund, Lars-Åke
  • Mariño, Julio
  • Pérez-Rubio, Sergio
  • Tamarit Muñoz, Salvador
[EN] During its lifetime, a program regularly undergoes changes that seek to improve its functionality or efficiency. However, such modifications may also introduce new errors. In this work, we use the designby-contract approach to allow programmers to formally state, in the code, some of the knowledge and assumptions originally made when the code was first written. Such contracts can then be checked at runtime, to ensure that modifications made to a program did not violate those assumptions. Applying these principles we have designed a runtime verification system for the Erlang language, permitting to specify as annotations the contracts needed for both sequential and concurrent code. As a second contribution we extend the commonly used Erlang gen server behaviour (a design pattern) permitting to specify declaratively when a server is ready to service a client request. The ideas presented in this paper have been implemented in a tool named EDBC. Its source code is available at github.com as an open-source and free project., This work has been partially supported by MINECO/AEI/FEDER (EU) under grant TIN2016-76843-C4-1-R, by the Comunidad de Madrid under grant S2013/ICE-2731 (N-Greens Software), and by the Generalitat Valenciana under grant PROMETEOII/2015/013 (SmartLogic). Salvador Tamarit was partially supported by the Conselleria de Educación, Investigación, Cultura y Deporte de la Generalitat Valenciana under grant APOSTD/2016/036.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Versatile New Paradigm for the Design of Optical Nanosensors Based on Enzyme-Mediated Detachment of Labeled Reporters: The Example of Urea Detection

  • Llopis-Lorente, Antoni|||0000-0002-6987-9506
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • VILLALONGA, REYNALDO
[EN] Here, a new bio-inspired nanoarchitectonics approach for the design of optical probes is presented. It is based on nanodevices that combine 1) an enzymatic receptor subunit, 2) a signaling subunit (consisting of a labeled reporter attached to a silica surface), and 3) a mechanism of communication between the two sites based on the production of chemical messengers by the enzymatic subunit, which induces the detachment of the reporter molecules from the silica surface. As a proof of concept, a urea nanosensor based on the release of Alexa-Fluor-647-labeled oligonucleotide from enzyme-functionalized Janus gold-mesoporous-silica nanoparticles (Au-MSNPs) was developed. The Janus particles were functionalized on the silica face with amino groups to which the labeled oligonucleotides were attached by electrostatic interactions, whereas the gold face was used for grafting urease enzymes. The nanodevice was able to release the fluorescent oligonucleotide through the enzyme-mediated hydrolysis of urea to ammonia and the subsequent deprotonation of amino groups on the silica face. This simple nanodevice was applied for the fluorometric detection of urea in real human blood samples and for the identification of adulterated milk. Given the large variety of enzymes and reporter species that could be combined, this is a general new paradigm that could be applied to the design of a number of optical probes for the detection of target analytes., A.L.-L. is grateful to "La Caixa" Banking Foundation for his Ph.D. fellowship. The authors thank to the Spanish Government (MINECO Projects MAT2015-64139-C4-1, AGL2015-70235-C2-2-R, CTQ2014-58989-P and CTQ2015-71936-REDT) and the Generalitat Valencia (Projects PROMETEOII/2014/047, PROMETEO2018/024) for support. The Comunidad de Madrid (S2013/MIT-3029, Programme NANOAVANSENS) is also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Relevance of Translational Regulation on Plant Growth and Environmental Responses

  • Ferrando Monleón, Alejandro Ramón|||0000-0002-1903-9111
  • Lisón, Purificación|||0000-0002-1662-8084
  • Castellano, Mar
  • Leister, Dario
  • Stepanova, Anna N.
  • Hanson, Johannes
The authors acknowledge funding by MINECO BIO2015-70483-R to AF, by CAM S2013/ABI-2734 and by ERC GA260468 to MMC, by the Deutsche Forschungsgemeinschaft (DFG, grant TRR175-C05) to DL, by NSF IOS 1444561 and NSF IOS PAPM-EAGER 1650139 to AS, and by Bio4Energy, a Strategic Research Environment appointed by the Swedish government to JH.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradable electrospun bionanocomposite fibers based on plasticized PLA-PHB blends reinforced with cellulose nanocrystals

  • ARRIETA, Marina Patricia
  • López-Martínez, Juan
  • López, Daniel
  • Kenny, J.M.
  • Peponi, L.
[EN] Electrospun biobased and biodegradable nanocomposites for sustainable flexible films were developed. Poly(lactic acid) (PLA) was blended with 25 wt% of poly(hydroxybutyrate) (PHB) to produce bead-less fibers and plasticized with 15 wt% of acetyl(tributyl citrate) (ATBC) to obtain flexible materials. The system was further loaded with cellulose nanocrystals (CNC) in 1 wt% and 5 wt% to obtain bionanocomposites with improved thermal and mechanical resistance. The morphological, structural, thermal and mechanical performance of electrospun bionanocomposites was investigated. The effect of ATBC was characterized by a decrease of the glasstransition temperature and an increase in the elongation at break. Meanwhile, CNC improved the thermal and mechanical resistance of mats. Thus, good performance for the intended use was achieved for the bionanocomposite loaded with 1 wt% of CNC (PLA-PHB-ATBC-CNC1), which also showed appropriate surface water resistance. All electrospun bionanocomposites were fully disintegrated under composting conditions showing their possible applications as compostable flexible film materials. (C) 2015 Elsevier B.V. All rights reserved., Authors thank Spanish Ministry of Science and Innovation (MAT2013-48059-C2-1-R and MAT2014-55778-REDT) and Regional Government of Madrid (S2013/MIT-2862). L.P. and M.P.A. acknowledge the “Ramon y Cajal” and the “Juan de la Cierva” contracts from the MINECO, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

EvoDeep: A new evolutionary approach for automatic Deep Neural Networks parametrisation

  • Martín, Alejandro
  • Lara-Cabrera, Raúl
  • Fuentes-Hurtado, Félix José
  • Camacho, David
  • Naranjo Ornedo, Valeriana|||0000-0002-0181-3412
[EN] Deep Neural Networks (DNN) have become a powerful, and extremely popular mechanism, which has been widely used to solve problems of varied complexity, due to their ability to make models fitted to non-linear complex problems. Despite its well-known benefits, DNNs are complex learning models whose parametrisation and architecture are made usually by hand. This paper proposes a new Evolutionary Algorithm, named EvoDeep. devoted to evolve the parameters and the architecture of a DNN in order to maximise its classification accuracy, as well as maintaining a valid sequence of layers. This model is tested against a widely used dataset of handwritten digits images. The experiments performed using this dataset show that the Evolutionary Algorithm is able to select the parameters and the DNN architecture appropriately, achieving a 98.93% accuracy in the best run. (C) 2017 Elsevier Inc. All rights reserved., This work has been co-funded by the next research projects: EphemeCH (TIN2014-56494-C4-4-P) and DeepBio (TIN2017-85727-C4-3-P) Spanish Ministry of Economy and Competitivity and European Regional Development Fund FEDER, Justice Programme of the European Union (2014-2020) 723180 -RiskTrack-JUST-2015-JCOO-AG/JUST-2015-JCOO-AG-1, and by the CAM grant S2013/ICE-3095 (CIBERDINE:Cybersecurity, Data and Risks). The contents of this publication are the sole responsibility of their authors and can in no way be taken to reflect the views of the European Commission.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Dynamic nonlinear focal shift in amplitude modulated moderately focused acoustic beams

  • Jimenez, Noe|||0000-0002-6539-670X
  • Camarena Femenia, Francisco|||0000-0002-6713-1414
  • González-Salido, Nuria
[EN] The phenomenon of the displacement of the position of the pressure, intensity and acoustic radiation force maxima along the axis of focused acoustic beams under increasing driving amplitudes (nonlinear focal shift) is studied for the case of a moderately focused beam excited with continuous and 25 kHz amplitude modulated signals, both in water and tissue. We prove that in amplitude modulated beams the linear and nonlinear propagation effects coexist in a semi-period of modulation, giving place to a complex dynamic behavior, where the singular points of the beam (peak pressure, rarefaction, intensity and acoustic radiation force) locate at different points on axis as a function of time. These entire phenomena are explained in terms of harmonic generation and absorption during the propagation in a lossy nonlinear medium both for a continuous and an amplitude modulated beam. One of the possible applications of the acoustic radiation force displacement is the generation of shear waves at different locations by using a focused mono-element transducer excited by an amplitude Modulated signal. (C) 2016 Elsevier B.V. All rights reserved., FC acknowledge financial support from the AICO/2016-108 program of the Generalitat Valenciana. NJ acknowledge financial support from the FPI Grant PAID-2011 from the Universitat Politecnica de Valencia. NGS acknowledge financial support from DPI2013-42236-R Project of the Spanish Ministry of Economy and Competitiveness, S2013/MIT-3024 of the Community of Madrid and from FPU Grant 12/02187 from the Spanish Ministry of Education, Culture and Sport.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Adaptive Filtered-x Algorithms for Room Equalization Based on Block-Based Combination Schemes

  • Fuster Criado, Laura
  • Azpicueta-Ruiz, Luis A.
  • de Diego Antón, María|||0000-0001-9948-3396
  • Ferrer Contreras, Miguel|||0000-0002-8743-1887
[EN] Room equalization has become essential for sound reproduction systems to provide the listener with the desired acoustical sensation. Recently, adaptive filters have been proposed as an effective tool in the core of these systems. In this context, this paper introduces different novel schemes based on the combination of adaptive filters idea: a versatile and flexible approach that permits obtaining adaptive schemes combining the capabilities of several independent adaptive filters. In this way, we have investigated the advantages of a scheme called combination of block-based adaptive filters which allows a blockwise combination splitting the adaptive filters into nonoverlapping blocks. This idea was previously applied to the plant identification problem, but has to be properly modified to obtain a suitable behavior in the equalization application. Moreover, we propose a scheme with the aim of further improving the equalization performance using the a priori knowledge of the energy distribution of the optimal inverse filter, where the block filters are chosen to fit with the coefficients energy distribution. Furthermore, the biased block-based filter is also introduced as a particular case of the combination scheme, especially suited for low signal-to-noise ratios (SNRs) or sparse scenarios. Although the combined schemes can be employed with any kind of adaptive filter, we employ the filtered-x improved proportionate normalized least mean square algorithm as basis of the proposed algorithms, allowing to introduce a novel combination scheme based on partitioned block schemes where different blocks of the adaptive filter use different parameter settings. Several experiments are included to evaluate the proposed algorithms in terms of convergence speed and steady-state behavior for different degrees of sparseness and SNRs., The work of L. A. Azpicueta-Ruiz was supported in part by the Comtmidad de Madrid through CASI-CAM-CM under Grant S2013/ICE-2845, in part by the Spanish Ministry of Economy and Competitiveness through DAMA under Grant TIN2015-70308-REDT, and Grant TEC2014-52289-R, and in part by the European Union. The work of L. Fuster, M. Ferrer, and M. de Diego was supported in part by EU together with the Spanish Government under Grant TEC2015-67387-C4-1-R (MINECO/FEDER), and in part by the Cieneralitat Valenciana under Grant PROMETEOII/2014/003. The associate editor coordinating the review of this manuscript and approving it for publication was Prof. Simon Dodo.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Development of flexible materials based on plasticized electrospun PLA PHB blends: Structural, thermal, mechanical and disintegration properties

  • ARRIETA, Marina Patricia
  • López. D.
  • Kenny, J. M.
  • Peponi, L.
  • López-Martínez, Juan|||0000-0001-6904-2282
In this work flexible PLA-PHB electrospun materials were developed by means of electrospinning technique. The processing parameters to obtain PLA-PHB electrospun fibers in different proportions (100:0; 75:25; 50:50, 25:75 and 0:100) were conditioned. A complete morphological, structural, thermal and mechanical characterization of the developed materials was conducted. The addition of PHB to PLA matrix, reduced considerably the formation of beads. PHB acts as nucleating agent for PLA in PLA-PHB blends. FTIR and Raman studies have showed interactions between PLA-PHB, mainly at proportion 75:25. The influence of the presence of plasticizer was also studied to obtain information on the possibility to use these thin mats as flexible films. Thus, PLA and PLA75-PHB25 electrospun mats were further plasticized with acetyl tri-n-butyl citrate (ATBC), which provoked an increase in elongation at break, achieving the ductility required for flexible films. The ternary system, PLA75-PHB25/ATBC, showed improved thermal stability due to the good interaction among three components. Disintegrability tests under composting conditions confirmed the biodegradable character of all electrospun mat formulations. Also, it was found that PHB slowed down the disintegration, while ATBC speeded it up. (C) 2015 Elsevier Ltd. All rights reserved., We are intended to the Spanish Ministry of Economy and Competitiveness (MAT2013-48059-C2-1-R and MAT2014-55778-REDT) and to the Regional Government of Madrid (S2013/MIT-2862) for their economic support. LP acknowledges also, the support of JAEDoc grant from CSIC cofinanced by FSE.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hybrid Mesoporous Nanocarriers Act by Processing Logic Tasks: Toward the Design of Nanobots Capable of Reading Information from the Environment

  • Llopis-Lorente, Antoni|||0000-0002-6987-9506
  • García-Fernández, Alba|||0000-0002-8416-1674
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • de Luis-Fernández, Beatriz
  • Jiménez-Falcao, Sandra
  • Orzaez, Mar
  • Villalonga, Reynaldo
[EN] Here, we present the design of smart nano-devices capable of reading molecular information from the environment and acting accordingly by processing Boolean logic tasks. As proof of concept, we prepared Au-mesoporous silica (MS) nanoparticles functionalized with the enzyme glucose dehydrogenase (GDH) on the Au surface and with supramolecular nanovalves as caps on the MS surface, which is loaded with a cargo (dye or drug). The nanodevice acts as an AND logic gate and reads information from the solution (presence of glucose and nicotinamide adenine dinucleotide (NADI), which results in cargo release. We show the possibility of coimmobilizing GDH and the enzyme urease on nanoparticles to mimic an INHIBIT logic gate, in which the AND gate is switched off by the presence of urea. We also show that such nanodevices can deliver cytotoxic drugs in cancer cells by recognizing intracellular NAD(+) and the presence of glucose., A.L.-L. is grateful to "La Caixa" Banking Foundation for his Ph.D. grant. A.G.-F. and B.de L. thank the Spanish government for FPU fellowships. The authors are grateful to the Spanish Government (MINECO Projects MAT2015-64139-C4-1, CTQ2014-58989-P, and CTQ2015-71936-REDT) and the Generalitat Valencia (Project PROMETEOII/2014/047 and PROMETEOII/2014/061) for support. The Comunidad de Madrid (S2013/MIT-3029, Programme NANOAVANSENS) is also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Au-Mesoporous silica nanoparticles gated with disulfide-linked oligo(ethylene glycol) chains for tunable cargo delivery mediated by an integrated enzymatic control unit

  • Llopis-Lorente, Antoni|||0000-0002-6987-9506
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • de Luis-Fernández, Beatriz
  • García-Fernández, Alba
  • Diez, Paula
  • Sánchez, Alfredo
  • Villalonga, Reynaldo
[EN] We report a delivery system based on Au-mesoporous silica (MS) nanoparticles functionalized with acetylcholinesterase on the Au face as a control unit and with disulfide-containing oligo(ethylene glycol) chains on the MS face as caps. The control unit handles the chemical information in the environment (the presence of acetyl-thiocholine or enzyme inhibitors) that results in a tuned cargo delivery from the nanocarrier. The nanodevice displayed an enhanced cargo delivery in cancer cells (safranin O and doxorubicin) in the presence of acetylthiocholine., A. Llopis-Lorente thanks "La Caixa" Banking Foundation for his PhD fellowship. A. Garcia-Fernandez is grateful to the Spanish government for an FPU grant. The authors are grateful to the Spanish Government (MINECO Projects MAT2015-64139-C4-1, CTQ2014-58989-P and CTQ2015-71936-REDT) and the Generalitat Valencia (Project PROMETEOII/2014/047) for support. The Comunidad de Madrid (S2013/MIT-3029, Programme NANOAVANSENS) is also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Interactive models of communication at the nanoscale using nanoparticles that talk to one another

  • Llopis-Lorente, Antoni|||0000-0002-6987-9506
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Díez, P.
  • Sánchez, A.
  • Martínez-Ruiz, Paloma
  • Villalonga, Reynaldo
[EN] 'Communication' between abiotic nanoscale chemical systems is an almost-unexplored field with enormous potential. Here we show the design and preparation of a chemical communication system based on enzyme-powered Janus nanoparticles, which mimics an interactive model of communication. Cargo delivery from one nanoparticle is governed by the biunivocal communication with another nanoparticle, which involves two enzymatic processes and the interchange of chemical messengers. The conceptual idea of establishing communication between nanodevices opens the opportunity to develop complex nanoscale systems capable of sharing information and cooperating., A. L.-L. is grateful to 'La Caixa' Banking Foundation for his PhD fellowship. We wish to thank the Spanish Government (MINECO Projects MAT2015-64139-C4-1, CTQ2014-58989-P and CTQ2015-71936-REDT and AGL2015-70235-C2-2-R) and the Generalitat Valenciana (Project PROMETEOII/2014/047) for support. The Comunidad de Madrid (S2013/MIT-3029, Programme NANOAVANSENS) is also gratefully acknowledged.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enzyme-Controlled Nanodevice for Acetylcholine-Triggered Cargo Delivery Based on Janus Au-Mesoporous Silica Nanoparticles

  • Llopis-Lorente, Antoni|||0000-0002-6987-9506
  • Sancenón Galarza, Félix|||0000-0002-5205-7135
  • Aznar, Elena|||0000-0003-0361-3876
  • Marcos Martínez, María Dolores|||0000-0001-7079-8589
  • Martínez-Máñez, Ramón|||0000-0001-5873-9674
  • Díez, Paula
  • De La Torre-Paredes, Cristina
  • Sanchez, Alfredo
  • Martínez-Ruíz, Paloma
  • Villalonga, Reynaldo
[EN] This work reports a new gated nanodevice for acetylcholine-triggered cargo delivery. We prepared and characterized Janus Au-mesoporous silica nanoparticles functionalized with acetylcholinesterase on the Au face and with supramolecular b-cyclodextrin: benzimidazole inclusion complexes as caps on the mesoporous silica face. The nanodevice is able to selectively deliver the cargo in the presence of acetylcholine via enzyme-mediated acetylcholine hydrolysis, locally lowering the pH and opening the supramolecular gate. Given the key role played by ACh and its relation with Parkinson's disease and other nervous system diseases, we believe that these findings could help design new therapeutic strategies., A.L.L. is grateful to "La Caixa" Banking Foundation for his PhD fellowship. The authors are gratitude to the Spanish Government (MINECO Projects MAT2012-38429-C04-01, MAT2015-64139-C4-1, CTQ2014-58989-P and CTQ2015-71936-REDT) and the Generalitat Valencia (Project PROMETEOII/2014/047) for support. The Comunidad de Madrid (S2013/MIT-3029, Programme NANOAVANSENS) is also gratefully acknowledged.
Repositorio Institucional del Instituto Madrileño de Estudios Avanzados en Nanociencia
Publicación Artículo científico (JournalArticle)

Microwave-Driven Exfoliation of Bulk 2H-MoS2 after Acetonitrile Prewetting Produces Large-Area Ultrathin Flakes with Exceptionally High Yield

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Estudio arqueométrico preliminar de los materiales cerámicoas bajoimperiales de Cubas de la Sagra

  • Peña Poza, Javier
  • Agua Martínez, Fernando
  • Oñate, Pilar
  • Sanguino, Juan
  • Villegas Broncano, María Ángeles
  • García Heras, Manuel
  • Conde Moreno, Juan Félix
[EN] The preliminary results derived from an archaeometric study of Late Roman ceramic materials found at the archaeological site Camino de Santa Juana from Cubas de la Sagra (Madrid) are presented. The study included the analysis of selected potsherds from Terra Sigillata (TSHT), imitation of Sigillata (CIS), molds of Sigillata, and common ceramic wares. Together with these potsherds several clay sediments collected in the vicinity of the archaeological site were also analyzed. Both sets were characterized by conventional chemical-physical techniques such as petrographic observation of thin sections, X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectrometry microanalysis (EDS), and X-ray fluorescence (XRF) spectrometry. The scope of results with respect to technology and likely provenance of distinct ceramic assemblages analyzed is discussed, [ES] Se presenta un avance de los resultados del estudio arqueométrico de los materiales cerámicos tardorromanos hallados en el yacimiento Camino de Santa Juana de Cubas de la Sagra (Madrid). El estudio comprendió el análisis de una selección de fragmentos cerámicos de Terra Sigillata (TSHT), de imitación de Sigillata (CIS), de moldes de Sigillata y de cerámica común. Junto a estos fragmentos también se analizaron varios sedimentos arcillosos recogidos en el entorno del yacimiento. Ambos conjuntos se caracterizaron mediante técnicas químico-físicas convencionales como observación petrográfica de láminas delgadas, difracción de rayos X (DRX), microscopía electrónica de barrido de emisión de campo (MEBEC), microanálisis de espectrometría de dispersión de energía de rayos X (EDS) y espectrometría de fluorescencia de rayos X (FRX). Se discute el alcance de los resultados respecto a la tecnología y posible procedencia de los distintos conjuntos cerámicos analizados., Este trabajo ha contado con la ayuda del Programa Geomateriales 2 (S2013/MIT-2914, Comunidad de Madrid y Unión Europea-Fondos Estructurales). Los autores agradecen el apoyo profesional de la Red TechnoHeritage de Ciencia y Tecnología para la Conservación del Patrimonio Cultural, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In vitro degradation of biodegradable polylactic acid/Mg composites: Influence of nature and crystalline degree of the polymeric matrix

  • Cifuentes, Sandra C.
  • Lieblich, Marcela
  • Saldaña, Laura
  • González-Carrasco, José Luis
  • Benavente, Rosario
A deeper knowledge on the degradation pattern of a biodegradable material is required before considering it for a specific application as a bioabsorbable implant. In the last few years, composites formed by polylactic-acid reinforced with Mg-based particles have been proposed for biodegradable implants. The aim of the present work is to study the effect of the type and crystalline degree of the polymeric matrix on in vitro degradation kinetics of PLA/Mg composites. The effect of the nature of the matrix has been studied by comparing a composite with a poly-L-lactic (PLLA) matrix with another with a poly-L,D-lactic (PLDA) matrix. The influence of the crystalline degree has been studied by comparing a near amorphous with a high crystalline composite. The degradation behaviour has been determined through a joint analysis of the microstructure, the changes in mass and water intake, the pH evolution in buffered and non-buffered media, and the amount of H released up to 28 days of immersion. The viability of human mesenchymal stem cells (MSCs) on the composites was also evaluated. Results show that a PLDA matrix is more effective lowering the degradation rate of Mg particles than PLLA. The crystalline degree plays a major role in PLA/Mg composites degradation. The composite with the near amorphous matrix exhibited the lowest degradation rate and the highest cell viability. Whereas, cell viability decreases markedly on the high-crystalline composites, which is likely related to the accelerated release of degradation products. These data highlight the importance of matrix crystallinity on the degradation kinetics and cytocompatibility of PLA/Mg composites., The authors thank funding from MAT2015-63974-C4-1-R , MAT2016-79869-C2-1-P, PCIN-2017-036, S2013/MIT-2862 and PI15/00752 ( ISCIII -MINECO-AES) projects. LS is supported by a Miguel Servet contract from ISCIII-MINECO-AES-FEDER-FSE. SCC is supported by a Juan de la Cierva contract FJCI-2016-29004 ., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preservation of electronic properties of double-decker complexes on metallic supports

  • Cirera, B.
  • Matarrubia, J.
  • Kaposi, T.
  • Giménez-Agulló, N.
  • Paszkiewicz, M.
  • Klappenberger, Florian
  • Otero, Roberto
  • Gallego, José M.
  • Ballester, P.
  • Barth, Johannes V.
  • Miranda, Rodolfo
  • Galán-Mascarós, José Ramón
  • Auwärter, W.
  • Écija, David
Single-molecule magnets based on lanthanide double-deckers are attracting significant attention due to their unrivaled single-ion anisotropy. To exploit their fascinating electronic and magnetic properties in devices for information storage or spin transport, studies on the preservation or variation of electronic and magnetic functionalities upon adsorption on surfaces are necessary. Herein, we introduced a comprehensive scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS) surface science study, complemented by density functional theory (DFT) simulations, of a recently synthesized single-molecule magnet based on porphyrazine deckers, conveniently equipped with ethyl moieties to make them soluble and sublimable. We demonstrated that the double-decker species were intactly adsorbed on Au(111), Ag(111), and Cu(111) in a flat-on fashion and self-assembled in hexagonal close-packed layers. Systematic multi- and monolayer XPS was performed on the surface-confined species, confirming the preservation of the electronic properties of the ligands and the lanthanide center upon adsorption., We acknowledge the financial support received from the EU (projects ERC Advanced Grant MolArt (no. 247299), ERC Consolidator Grant Nanosurfs (no. 615233), ERC Starting Grant CHEMCOMP (no. 279313), EC FP7-PEOPLE-2011-COFUND AMAROUT II program), the Spanish Ministerio de Economía y Competitividad (MINECO) (RYC-2012-11133, FIS 2013-40667-P, FIS 2015-67287-P and Severo Ochoa Excellence Accreditation 2014-2018 SEV-2013-0319), the Comunidad de Madrid (project MAD2D), Generalitat de Catalunya (2014-SGR-797), the IMDEA Foundation, the ICIQ Foundation, the German Research Foundation (DFG) via KL 2294/3-1, and the Munich-Center for Advanced Photonics (MAP). WA acknowledges funding received by the DFG via a Heisenberg professorship.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Diseño y ejecución de un proyecto didáctico sobre la conservación del Patrimonio Cultural para EI, EP y ESO, Design and implementation of a didactic project about conservation of cultural heritage for pre‐university

  • Gil Puente, Cristina
  • Peña Poza, Javier
  • Agua Martínez, Fernando
  • García Heras, Manuel
  • Villegas Broncano, María Ángeles
[EN] This study presents a sequence of teaching‐learning focused on the conservation of cultural heritage and adapted to different educational levels. It is carried out with groups of students of Early Children’s Education, second interlevel of Elementary Education and first cycle of Secondary Education of the Regional Community of Madrid. With the set of activities included in the proposal, it is intended that students acquire competences and contents from different areas of knowledge based on the curriculum. For this purpose it has being worked through active methodologies. In this work, in addition to describing the didactic sequence used, the results obtained through different assessment instruments are analyzed and several conclusions are raised, which can be used for their future implementation by teachers., [ES] En este estudio se presenta una secuencia de enseñanza‐aprendizaje enfocada a la conservación de Patrimonio Cultural y adaptada a diferentes niveles educativos. Se lleva a cabo con grupos de estudiantes de Educación Infantil, segundo internivel de Educación Primaria y primer ciclo de Educación Secundaria de la Comunidad de Madrid. Con el conjunto de actividades incluidas en la propuesta se pretende que el alumnado adquiera competencias y contenidos de diferentes áreas de conocimiento en base al currículo, para ello se ha trabajado mediante metodologías activas. En este trabajo, además de describir la secuencia didáctica utilizada, se analizan los resultados obtenidos mediante diferentes instrumentos de evaluación, y se plantean varias conclusiones que pueden servir para su implementación futura por parte del profesorado., Los autores agradecen la inestimable colaboración de los docentes y equipos de dirección del CEIP García Lorca (Alcalá de Henares), Colegio Lagomar (Valdemoro) y CEIPSO Eugenio Muro (Cadalso de los Vidrios). Asimismo, al Programa Geomateriales 2 (S2013/MIT‐2914) financiado por la Comunidad de Madrid y Fondos Estructurales (FSE y FEDER), al proyecto MAT2015‐65445‐C2‐2‐R (MINEICO/FEDER) y al apoyo profesional de TechnoHeritage, Red de Ciencia y Tecnología para la Conservación del Patrimonio Cultural., Peer reviewed, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Propuesta de protocolo de valoración de la acidez ambiental en salas y vitrinas de la exposición temporal El último viaje de la fragata Mercedes. La razón frente al expolio (Museo Naval, Madrid), Proposed protocol for assessing environmental acidity in exhibition rooms and showcases of the temporary exhibition The last trip of the Mercedes frigate. The reason against the expolio (The Navy Museum, Madrid), Proposta de protocolo de avaliação da acidez ambiental em salas e montras da exposição tem-porária A última viagem da fragata Mercedes. A razão frente ao espolio (Museu Naval de Madrid)

  • Peña Poza, Javier
  • Gálvez Farfán, José María
  • González Rodrigo, Mercedes
  • García Ramírez, Susana
  • Villegas Broncano, María Ángeles
  • García Heras, Manuel
[EN] In this work an environmental valuation, either in exhibition rooms or inside showcases, has been undertaken in the temporary exhibition “The last trip of the Mercedes frigate. The reason against the expolio”, held in the Navy Museum of Madrid. The study was accomplished through a protocol for monitoring environmental acidity which uses optical sensors. The results obtained demonstrated that average values of pH were located near the theoretical neutrality (low risk of acid shock), except in some showcases in which slightly acid values were detected. The data indicated that ventilation systems and materials employed in exhibition rooms and showcases (e.g. paints, varnishes, adhesives, etc.) were adequate since they did not cause dangerous pH values for the proper conservation of collections., [ES] En este trabajo se ha realizado la valoración ambiental, tanto en salas como en el interior de vitrinas, en la exposición temporal El último viaje de la fragata Mercedes. La razón frente al expolio, celebrada en el Museo Naval de Madrid. El estudio se realizó mediante un protocolo de seguimiento de la acidez ambiental que utiliza sensores ópticos. Los resultados obtenidos demostraron que los valores promedio de pH se situaban cercanos a la neutralidad teórica (riesgo de choque ácido bajo), excepto en algunas vitrinas en las que se detectaron valores ligeramente ácidos. Los datos indicaron que los sistemas de ventilación y los materiales empleados en salas y vitrinas (p. ej. pinturas, barnices, adhesivos, etc.) eran adecuados ya que no provocaron valores de pH perjudiciales para la correcta conservación de las colecciones., [PT] Neste trabalho efectuou-se a avaliação ambiental, tanto em relação às salas como em relação ao interior das montras, da exposição temporária “A última viagem da fragata Mercedes. A razão frente ao espolio”, realizada no Museu Naval de Madrid. O estudo realizou-se mediante um protocolo de seguimento da acidez ambiental que utiliza sensores ópticos. Os resultados obtidos demonstraram que os valores médios de pH se situavam perto da neutralidade teórica ( risco leve de choque ácido), excepto em algumas montras em que foram detectados valores ligeiramente ácidos. Os dados indicaram que os sistemas de ventilação e os materiais utilizados nas salas e nas montras ( por ex: tintas, vernizes, colas, etc) foram os adequados visto não terem causado valores de pH prejudiciais para a conservação correta das colecções, Los autores agradecen a Fernando Agua y Juan Félix Conde (Instituto de Historia, CSIC) su inestimable ayuda y colaboración en la realización del estudio. También desean expresar su agradecimiento a los proyectos ref. HAR-2012-30769 (Ministerio de Economía y Competitividad) y S2013/MIT-2914 (Comunidad de Madrid y fondos estructurales UE). Asimismo agradecen a la TechnoHeritage de Ciencia y Tecnología para la Conservación del Patrimonio Cultural su apoyo profesional., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Secure elliptic curves and their performance

  • Gayoso Martínez, Víctor
  • Hernández Encinas, Luis
  • Martín Muñoz, Agustín
  • Durán Díaz, Raúl
13 páginas, 2 tablas, Elliptic Curve Cryptography (ECC) is a branch of public-key cryptography based on the arithmetic of elliptic curves. In the short life of ECC, most standards have proposed curves defined over prime finite fields satisfying the curve equation in the short Weierstrass form. However, some researchers have started to propose as a securer alternative the use of Edwards and Montgomery elliptic curves, which could have an impact in current ECC deployments. This contribution evaluates the performance of the three types of elliptic curves using some of the examples provided by the initiative SafeCurves and a Java implementation developed by the authors, which allows us to offer some conclusions about this topic., This work has been partially supported by Ministerio de Econom´ıa, Industria y Competitividad (MINECO), Agencia Estatal de Investigaci´on (AEI), and Fondo Europeo de Desarrollo Regional (FEDER, UE) under project COPCIS, reference TIN2017-84844-C2-1-R, and by Comunidad de Madrid (Spain) under project CIBERDINE, reference S2013/ICE-3095-CM, also co-financed by European Union FEDER funds.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Comparing low and medium cost computer-based technologies suitable for cryptographic attacks

  • Gayoso Martínez, Víctor
  • Hernández Encinas, Luis
  • Martín Muñoz, Agustín
  • Martínez-Graullera, Óscar
14 páginas, 4 figuras, 10 tablas, Initially developed for tasks related to computer graphics, GPUs are increasingly being used for general purpose processing, including scientific and engineering applications. In this contribution, we have compared the performance of two graphics cards that belong to the parallel computing CUDA platform with two C++ and Java multi-threading implementations, using as an example of computation a brute-force attack on Hitag2, a well known remote keyless entry application. The results allow us to provide valuable information regarding the compared capabilities of the tested platforms and to confirm that such a weak encryption system could be broken in less than a day with medium cost equipment., This work has been partially supported by Ministerio de Econom´ıa, Industria y Competitividad (MINECO), Agencia Estatal de Investigaci´on (AEI), and Fondo Europeo de Desarrollo Regional (FEDER, UE) under project COPCIS, reference TIN2017-84844-C2-1-R, and by Comunidad de Madrid (Spain) under project CIBERDINE, reference S2013/ICE-3095-CM, also co-financed by European Union FEDER funds.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetization Ratchet in Cylindrical Nanowires

  • Bran, Cristina
  • Berganza, Eider
  • Fernández-Roldán, José A.
  • Palmero, Ester M.
  • Calle, Esther
  • Jaafar, Miriam
  • Pérez del Real, Rafael
  • Asenjo Barahona, Agustina
  • Chubykalo-Fesenko, O.
  • Vázquez Villalabeitia, Manuel
[EN] The unidirectional motion of information carriers such as domain walls in magnetic nanostrips is a key feature for many future spintronic applications based on shift registers. This magnetic ratchet effect has so far been achieved in a limited number of complex nanomagnetic structures, for example, by lithographically engineered pinning sites. Here we report on a simple remagnetization ratchet originated in the asymmetric potential from the designed increasing lengths of magnetostatically coupled ferromagnetic segments in FeCo/Cu cylindrical nanowires. The magnetization reversal in neighboring segments propagates sequentially in steps starting from the shorter segments, irrespective of the applied field direction. This natural and efficient ratchet offers alternatives for the design of three-dimensional advanced storage and logic devices., This work has been supported by the Spanish Ministry of Economy, Industry and Competitiveness (MINECO) undergrants MAT2016-76824-C3-1-R and FIS2016-78591-C3-3-Rand by the Regional Government of Madrid under project S2013/MIT2850 NANOFRONTMAG-CM. We acknowledgethe service from the MiNa Laboratory at IMN and fundingfrom CM (project SpaceTec, S2013/ICE2822), MINECO(project CSIC13-4E-1794), and EU (FEDER, FSE). J.M.acknowledges DAAD support during her stay at ICMM/CSIC.M.J. acknowledges a funding grant from Spanish MINECO under the MAT2015-73775-JIN research project. J.A.F.-R.acknowledges support from Spanish MINECO and FSE thoughfellowship BES-2014-068789
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rare earth-free hard magnetic microwires

  • Betancourt, I.
  • Zamora, J
  • Jiménez, A.
  • Pérez del Real, Rafael
  • Vázquez Villalabeitia, Manuel
[EN] Novel microwires of composition MnBi were obtained by means of quenching and drawing technique having a metallic nucleus of 50 μm diameter. Phase distribution analysis showed a composite microstructure comprising extensive zones of the ferromagnetic hexagonal MnBi phase (of up to 12 μm), interspersed within a matrix of diamagnetic Bi and some inclusions of pure Mn varying between 1 and 2 μm in length. A coercive field in excess of 4000 Oe was measured. Coercivity mechanism is described in terms of nucleation of reverse domains, for which the interface MnBi/Bi largely determines the hard magnetic response of the composite microwire., Project UNAM-PAPIIT IN103216. J. Zamora is grateful for the scholarship received from UNAM-PAPIIT IN103216 and CONACYT-Mexico. Special thanks are given to Adriana Tejeda, Omar Novelo and Josue Romero (IIM-UNAM) for their valuable technical assistance. The work has been Fig. 3. Temperature dependence for a) maximum magnetization and b) coercive field of the MnBi microwire. Fig. 4. Fitting of experimental data for Eq. (1) (R2 = 0.998). 42 I. Betancourt et al. / Scripta Materialia 153 (2018) 40–43 partly supported by the Regional Government of Madrid under Project S2013/MIT-1942850, NANOFRONTMAG-CM
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Spirulina extract improves age-induced vascular dysfunction

  • Majewski, M.
  • Klett-Mingo, M.
  • Verdasco-Martín, Carlos M.
  • Otero Hernández, Cristina
  • Ferrer, Mercedes
Context: Vascular dysfunction is considered a hallmark of ageing that has been associated with altered vasomotor responses, in which nitric oxide (NO) and reactive oxygen species participate. The consumption of Spirulina extracts, with antioxidant properties, increased recently. Objective: This study investigates the effect of Spirulina aqueous extract (SAE) on the vascular function of the aorta from aged rats. Materials and methods: Aortic segments from aged male Sprague-Dawley rats (20–22 months old) were exposed to SAE (0.1% w/v, for 3 h) to analyse: (i) the vasodilator response induced by acetylcholine (ACh), by the NO donor sodium nitroprusside (SNP), by the carbon monoxide releasing molecule (CORM) and by the KATP channel opener, cromakalim (CK); (ii) the vasoconstrictor response induced by KCl and noradrenaline (NA); (iii) the production of NO and superoxide anion, and (iv) the expression of the p-eNOS and HO-1 proteins. Results: Incubation with SAE increased the expression of p-eNOS (1.6-fold) and HO-1 (2.0-fold), enhanced NO release (1.4-fold in basal and 1.9-fold in ACh-stimulated conditions) while decreased the production of superoxide (0.7-fold). SAE also increased the sensitivity (measured as pEC50) to ACh (control: −7.06 ± 0.11; SAE: −8.16 ± 0.21), SNP (control: −7.96 ± 0.16; SAE: −9.11 ± 0.14) and CK (control: −7.05 ± 0.39; SAE: −8.29 ± 0.53), and potentiated the response to KCl (1.3-fold) and to NA (1.7-fold). Conclusion: The antioxidant properties of SAE improved the vasomotor responses of aorta from aged rats. These results may support the use of Spirulina as a protection against vascular dysfunction. © 2022 The Author(s). Published by Informa UK Limited, trading as Taylor & Francis Group., This study was supported by grants from Comunidad de Madrid (S2013/ABI-2783, ‘INSPIRΑ1-CM’) and Fondo Europeo de Desarrollo Regional to C. O. and M. F., the Spanish Ministerio de Ciencia e Innovación (CTQ2017-86170-R) to C. O. and by the Fondo de Investigaciones Sanitarias del Instituto de Salud Carlos III (PI19/01282) to M. F., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Selective synthesis of partial glycerides of conjugated linoleic acids via modulation of the catalytic properties of lipases by immobilization on different supports

  • Verdasco-Martín, Carlos M.
  • García-Verdugo, Eduardo
  • Porcar, Raúl
  • Fernández-Lafuente, Roberto
  • Otero Hernández, Cristina
Lipases B from Candida antarctica (CALB), Rhizomucor miehei (RML) and Thermomyces lanuginosus (TLL) were immobilized on octadecyl methacylate (OM) or octadecyl methacrylate (OMC) beads. Their specific activity and regioselectivity were studied in the synthesis of conjugated linoleic acid (CLA) partial glycerides, which presented nutraceutical properties. TLL derivatives were poor catalysts. Novozym® 435 was much better than Lipozyme® RM IM. RML activity (a GRAS enzyme) was modulated via immobilization. After only 3 h, OM−RML gave the highest CLA conversion (54% at 40 °C with 1:3 M ratio of glycerol to CLA). OM-RML reduced by a factor of 3.12 and 1.16 the activation energy of the reaction with Lipozyme® RM IM and Novozym® 435, respectively. The new GRAS preparation OM-RML brings forth an optimal regioselective preparation of sn-1 mono and sn-1,3 diacylglycerols rich in CLA, with a ratio of sn-1,3/sn-1,2 regioisomers of 21.8, compared to 2.3 for Novozym® 435. © 2017 Elsevier Ltd, This work was partially supported by the Program of I+D Activities of the Autonomous Community of Madrid, Spain: Tecnología 2013 (Project INSPIRA1-CM Ref. S2013/ABI-2783 “Aplicaciones industriales de la Espirulina”., and co-financed by the European Structural Found (European Social Found -EFS- and European Found for Regional Development-FEDER-). We recognize the support from the MINECO of Spanish Government, CTQ2013-41507-R and CTQ2017-86170-R. The authors wish to thank Mr. Ramiro Martínez (Novozymes, Spain) for kindly supplying the enzymes used in this research. The help and suggestions made by Dr. Ángel Berenguer (Instituto de Materiales, Universidad de Alicante) and Dr Malcolm Yates (ICP-CSIC) are gratefully recognized., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Advantageous enzyme selective extraction process of essential spirulina oil

  • Verdasco-Martín, Carlos M.
  • Díaz-Lozano, Azahara
  • Otero Hernández, Cristina
Spirulina is an important source of metabolites and nutrients. It grows rapidly with low land requirements, and it is an ideal feedstock for implementation of a biofactory of bioactive products. A Part of intracelular biocomponents are not extracted with conventional methods, but they can be using green and selective enzyme-assisted extractions. Different selective degradations of cyanobacterial murein layer with peptidoglycans and lipopolysaccharide polymers were studied for extraction of spirulina oil. The effects of most important parameters of biomass degradation with two proteases and two glucanases were studied in the range of pH (5–9), temperature (30–50 °C), enzyme loading (0.5%–2% v/w) and time (0–24 h). Each procedure yields different products and oil recovery yields. Vinoflow® gave the highest oil extraction effectiveness (8.1% w/w), resulting 74% higher and being 1.8 times richer in unsaturated fatty acids (64.92 mol %) than with the simple solvent extraction; the more abundant acids in this oil extract were: palmitic (32.7%), palmitoleic (19.6%), linolenic (18.8%) and linoleic (18.9%). However, Alcalase® gives rise to the most important destruction of cell integrity by transmission electronic microscopy and the highest extraction yield of hydrophilic biocomponents recovery (36.50% w/w). © 2019, This work was partially supported by the Program of I+D Activities of the Autonomous Community of Madrid, Spain: Tecnología 2013 (Project INSPIRA1-CM Ref. S2013/ABI-2783″Aplicaciones industriales de la Espirulina"., and co-financed by the European Structural Found (European Social Found -EFS- and European Found for Regional Development- FEDER-). The authors wish to thank Mr. Rafael Montoro Carrillo, Manager of ASN Leader S.L. for the generous support with a spirulina free sample and information provided. Also thanks to Mr. Ramiro Martínez (Novozymes, Spain) for kindly supplying the enzymes used in this research. Authors thanks helpful support in the manuscript edition to Dr. Antonio López de Lacey., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Rapid and high yield production of phospholipids enriched in CLA via acidolysis: The critical role of the enzyme immobilization protocol

  • Verdasco-Martín, Carlos M.
  • Corchado-Lopo, Carlos
  • Fernández-Lafuente, Roberto
  • Otero Hernández, Cristina
Phospholipids (PL) rich in conjugated linolenic acid (CLA) have important health effects. Yields of phosphatidylcholine (PC) acidolysis with CLA use to be limited to <30%, due to competitive side-hydrolysis. Duolite A658–Lecitase is a very suitable biocatalyst for this reaction. In this study, PC hydrolysis has been practically eliminated using extremely dried lyophilized PC (279 ± 4 mg water/Kg PC), obtaining close to 100% molar yield of modified PC (72.3% CLA) with Duolite-Lecitase in 24 h, the highest yield reported in the literature for this reaction. It has been better improved by changing the immobilization support, using three food grade hydrophobic supports (Styrene, and two Octadecyl methacrylates (OM and OMC)). In only 2 h, with a 1/12 PC/CLA molar ratio at 50 °C, similar almost quantitative yields of PC with 74.4% CLA content has been obtained using OM-Lecitase. The fatty acid composition of modified PCs is not affected by the enzyme immobilization protocol. © 2019 Elsevier Ltd, This work was partially supported by the Program of I + D Activities of the Autonomous Community of Madrid, Spain: Tecnología 2013 (Project INSPIRA1-CM Ref. S2013/ABI-2783 “Aplicaciones industriales de la Espirulina”., and co-financed by the European Structural Found (European Social Found -EFS- and European Found for Regional Development- FEDER-). We recognize the support from the MINECO of Spanish Government, CTQ2017-86170-R. The authors wish to thank Mr. Ramiro Martínez (Novozymes, Spain) for kindly supplying the enzymes used in this research and Dr Alessandra Basso (Purolite) and Dow Chemical Company by the kind donation of the supports. The English supervision from Dr. Ángel Berenguer (Departamento de Química Inorgánica, Universidad de Alicante) is gratefully recognized., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of nickel loading of mixed oxide catalyst ex-hydrotalcite for H2 production by methane decomposition

  • García-Sancho, Cristina
  • Guil-López, Rut
  • Pascual, Laura
  • Maireles-Torres, Pedro
  • Navarro Yerga, Rufino Manuel
  • García Fierro, José Luis
Hydrogen production free of CO and CO<inf>2</inf> was carried out by methane decomposition process using Ni-mixed oxides from hydrotalcite like-materials (ex-HTs) as catalysts. The chemical composition was changed in order to evaluate the influence of the Ni-loading on the main physicochemical (ICP-AES, XRD, XPS, TPR, adsorption/desorption of N<inf>2</inf> at 77 K and CO<inf>2</inf>-TPD) properties and on the catalytic performance. For all Ni-loadings (from 7.5 to 58 atomic%), the hydrotalcite structure was the only precursor. After calcination at 850 °C, different mixed oxides were formed as a function of Ni-loading, although Ni-Mg-Al mixed oxide matrix or non-stoichiometric spinel phase was the main phase for all catalysts, with the exception of the 58 Ni atomic% sample, in which the NiO segregated from the Mg-Al matrix was the main phase. Methane conversion close to 55% was achieved, hydrogen was the only gaseous product. The most active catalyst was that containing 46% Ni at. Transmission Electron Microscopy (TEM) images of the spent catalysts showed the appearance of multiwall carbon nanotubes (MWCNTs) although under severe reaction conditions, e.g. high temperatures for thermo-programmed temperature experiments, and the long reaction times for isothermal experiments produced low quality MWCNTs. © 2017, This work was performed within the research program supported by CAM (Spain) under project no. S2013/MAE-2882. C.G.S. wishes to express thanks to MINECÓs Juan de la Cierva Program for grant (FJCI- 2014-19887)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Evaluation of polyaniline-Nafion® composite membranes for direct methanol fuel cells durability tests

  • Escudero-Cid, Ricardo
  • Montiel, Manuel
  • Sotomayor, L.
  • Loureiro, B.
  • Fatás, Enrique
  • Ocón, Pilar
8 figures, 2 tables., A Nafion® membrane has been both electrochemically and chemically modified in-situ to incorporate polyaniline (PANi) into its structure. The proposed objective was to decrease the methanol (MeOH) permeability and thus improve the durability of a direct methanol fuel cell device. Permeability and conductivity of the modified membranes were measured using the unmodified Nafion® 117 as a reference. The permeability was determined from the electrochemical oxidation of permeated methanol, and the conductivity was determined via electrochemical impedance spectroscopy. To evaluate the effect of these modifications, the performance of a MeOH/O2 single-cell was measured using different MeOH flows and concentrations. The device durability was evaluated under a constant potential and at different operating times. The power density, p, at high MeOH flows and concentrations was 7 times higher for the PANi-modified membrane than the unmodified Nafion® 117. The durability of the modified membranes containing small amounts of PANi was 2 times higher using low MeOH flows and concentrations, while the power densities were similar. Impedance measurements were performed before and after the long-term durability tests in order to identify the improvements at the different parts of the fuel cell., The authors would like to acknowledge to MICINN for funding the project with reference ENE2013-42322-R and CAM for Project S2013/MAE-2882 (RESTOENE-2)., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Emergent causality and the N-photon scattering matrix in waveguide QED

  • Sánchez-Burillo, E.
  • Cadarso, A.
  • Martín-Moreno, L.
  • García-Ripoll, J.J.
  • Zueco, D.
In this work we discuss the emergence of approximate causality in a general setup from waveguide QED - i.e. a one-dimensional propagating field interacting with a scatterer. We prove that this emergent causality translates into a structure for the N-photon scattering matrix. Our work builds on the derivation of a Lieb-Robinson-type bound for continuous models and for all coupling strengths, as well as on several intermediate results, of which we highlight: (i) the asymptotic independence of space-like separated wave packets, (ii) the proper definition of input and output scattering states, and (iii) the characterization of the ground state and correlations in the model. We illustrate our formal results by analyzing the two-photon scattering from a quantum impurity in the ultrastrong coupling regime, verifying the cluster decomposition and ground-state nature. Besides, we generalize the cluster decomposition if inelastic or Raman scattering occurs, finding the structure of the -matrix in momentum space for linear dispersion relations. In this case, we compute the decay of the fluorescence (photon-photon correlations) caused by this S-matrix.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

An axiomatic approach to finite means

  • Campión, M.J.
  • Candeal, J.C.
  • Catalán, R.G.
  • Giarlotta, A.
  • Greco, S.
  • Induráin, E.
  • Montero, J.
In this paper we analyze the notion of a finite mean from an axiomatic point of view. We discuss several axiomatic alternatives, with the aim of establishing a universal definition reconciling all of them and exploring theoretical links to some branches of Mathematics as well as to multidisciplinary applications.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Asymmetrical flow field-flow fractionation coupled to inductively coupled plasma mass spectrometry for sizing SeNPs for packaging applications

  • Palomo-Siguero, M.
  • Vera, P.
  • Echegoyen, Y.
  • Nerin, C.
  • Cámara, C.
  • Madrid, Y.
This paper describes the application of Asymmetrical Flow Field-Flow Fractionation (AF4) coupled to diode array detector (DAD) and inductively coupled plasma mass spectrometry (AF4-UV-ICP-MS) to characterize selenium nanoparticles (SeNPs) in an aqueous acrylic adhesive to be used in a multilayer food packaging material. SeNPs were synthesized using a solution-phase approach based on the reduction of selenite with ascorbic acid in presence of different stabilizers compatible with food industry such as polysaccharides (chitosan (poly(D-glucosamine) and hydroxyethylcellulose (HEC)) and non-ionic surfactants (Triton X-100 (t-octylphenoxypolyethoxyethanol), 2, 4, 7, 9-tetramethyl 5decyne-4, 7-diol ethoxylate, and isotridecanol ethoxylate). Several parameters such as pH, ascorbic acid and stabilizers concentration, and compatibility of the stabilizer with the adhesive were evaluated. SeNPs suspensions with spherical morphology were obtained except when isotridecanol ethoxylate was employed which provides SeNPs with a nanorod morphology. AF4-DAD-ICP-MS was further applied for sizing the different SeNPs preparations. DAD was used as detector for selecting the best AF4 separation conditions before coupling to ICP-MS to ensure unequivocal identification of NPs. AF4 calibration with polystyrene latex (PSL) beads of known sizes allowed size determination of the different SeNPs. The following estimated hydrodynamic sizes (expressed as the mean ± standard deviation, n = 6 replicates) were found: chitosan-SeNPs- (26 ± 3 nm), TritonX100-SeNPs (22 ± 10 nm) HEC- SeNPs (91 ± 8 nm) and 2, 4, 7, 9-tetramethyl 5decyne-4, 7-diol ethoxylate- SeNPs (59 ± 4 nm). The proposed methodology was successfully applied to the characterization in terms of size of aqueous acrylic adhesives containing SeNPs Results from AF4-ICP-MS and TEM shown that only those SeNPs obtained with non-ionic surfactants and HEC were compatible with the adhesive. The results reported here evidence the usefulness of AF4-ICP-MS as analytical tool for controlling those manufacturing process involving nanoparticles which opens new frontiers in applicability of AF4-ICP-MS.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Effectiveness of carbon pricing policies for promoting urban freight electrification: analysis of last mile delivery in Madrid

  • Arroyo, Jose
  • Felipe Ortega, Ángel
  • Ortuño Sánchez, María Teresa
  • Tirado Domínguez, Gregorio
This research analyzes the effect of carbon pricing policies in transport electrification. It combines a heuristic algorithm to solve the Green Vehicle Routing Problem with Multiple Technologies and Partial Recharges with an economic Total Cost of Ownership model. The paper compares the performance of battery electric (BEV) and internal combustion vehicles (ICEV) for last mile delivery, using real data of Madrid (Spain). The results show that carbon pricing is scarcely effective when daily mileage is low (precisely when BEVs require incentives), and its effectivity increases as mileage increases (precisely when it is not so necessary to incentivize BEVs). Hence, carbon pricing is not an effective tool for promoting electric vehicles in the short term, and as a result, any political decision to fix CO2 prices must be adopted with a long-term view in mind. Specifically for the case of Spain, this research shows that current aids to BEVs are insufficient, with the exception of some regions like Madrid, which complement national subsidies with regional ones.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Multi-objective optimization for a strategic ATM network redesign problem

  • Denstad, Are
  • Ulsund, Einar
  • Christiansen, Marielle
  • Hvattum, Lars Magnus
  • Tirado Domínguez, Gregorio
During the last decades, the banking industry has been facing multiple challenges, from changes in regulations and legal systems, to the irruption of new technologies. A constant adaptation to the rapidly changing business ecosystem is therefore required. This paper deals with one type of efficiency improvement that is required from traditional banking operations as a result of the current shift in the industry towards more use of technology. That is, we deal with the decision-making process related to the redesign of existing ATM networks, which is currently being considered by many banksworldwide. This redesign is mainly a consequence of an increased use of electronic payment methods and card transactions, which have made the demand for cash decrease significantly. We describe a multi-objective mathematical programming model to be used as a tool when making strategic decisions regarding the bank ATMnetwork redesign. Total costs and the coverage of customers and turnover are considered as conflicting performance attributes and analyzed through several multi-criteria techniques, namely the weighted sum and Tchebycheff methods and Archimedean goal programming. Among other insights, the results on a realistic case study show that the potential for cost reductions is high and that the consideration of both customer coverage and turnover coverage is crucial for the performance of the network.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Phenolic metabolites in plasma and thigh meat of chickens supplemented with grape byproducts

  • Muñoz González, Irene
  • Chamorro Francisco, Susana
  • Pérez Jiménez, Jara
  • López Andrés, Patricia
  • Álvarez Acero, Inmaculada
  • Herrero Herranz, Ana María
  • Nardoia, Marı́a
  • Brenes, Agustín
  • Viveros Montoro, Agustín
  • Arija Martín, Ignacio
  • Rey Muñoz, Ana Isabel
  • Ruiz Capillas, Claudia
Grape byproducts are rich sources of polyphenols with powerful antioxidant and health-promoting effects. The impact of supplementing chicken diets with grape byproducts on plasma and thigh meat concentrations of phenolic metabolites was evaluated by analyzing samples by high-performance liquid chromatography quadrupole time of flight mass spectrometry. Chickens were fed three experimental diets: Control diet, Control+8% grape pomace, and Control+0.1% grape seed extract. In plasma, 32 phenolic metabolites were identified, some of which were conjugated catechin/epicatechin metabolites exclusively identified in chickens fed diets enriched in grape byproducts. Also, these chickens showed significantly higher plasmatic concentrations of 21 phenolic metabolites. In thigh meat, 14 phenolic metabolites were identified, but no differences were found between diets. Higher plasmatic tocopherol was found when supplementing diets with grape byproducts, while no changes were observed in meat. Thus, supplementing chicken diets with grape byproducts leads to a significant increase in the circulation of phenolic metabolites and tocopherol.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Multi-criteria optimization for last mile distribution of disaster relief aid: Test cases and applications

  • Ferrer Caja, José María
  • Martín Campo, Francisco Javier
  • Ortuño Sánchez, María Teresa
  • Pedraza Martínez, Alfonso
  • Tirado Domínguez, Gregorio
  • Vitoriano Villanueva, Begoña
Humanitarian organizations transport large quantities of aid for distribution in the aftermath of disasters. Transportation for last mile distribution includes multiple, and often conflicting, performance criteria that include time (deprivation), cost, coverage, equity and security. We build a compromise programming model for multi-criteria optimization in humanitarian last mile distribution. Regarding security, ours is the first multi-criteria model able to produce an actual vehicle schedule while forcing vehicles to form convoys in humanitarian operations research. We illustrate the multi-criteria optimization using a realistic test case based on the Pakistan floods, 2010. We standardize and share this case as well as cases based on the Niger famine, 2005 and the Haiti earthquake, 2010. By sharing test cases, we encourage basic scientific tasks such as replicability and model comparison within the humanitarian operations research community.
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Quantum metropolitan optical network based on wavelength division multiplexing

  • Ciurana Aguilar, Alex
  • Martínez Mateo, Jesús|||0000-0002-4579-6458
  • Peev, Momtchil
  • Poppe, Andreas
  • Walenta, Nino
  • Zbinden, Hugo
  • Martín Ayuso, Vicente|||0000-0002-2559-3979
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Multi-dimensional classification of GABAergic interneurons with Bayesian network-modeled label uncertainty

  • Mihaljevic, Bojan|||0000-0002-1656-6135
  • Benavides Piccione, Ruth
  • Bielza Lozoya, María Concepción|||0000-0001-7109-2668
  • Felipe Oroquieta, Javier de|||0000-0001-5484-0660
  • Larrañaga Múgica, Pedro María|||0000-0003-0652-9872
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Conditional density approximations with mixtures of polynomials

  • Varando, Gherardo
  • López Cruz, Pedro Luis
  • Nielsen, Thomas D.
  • Larrañaga Múgica, Pedro María|||0000-0003-0652-9872
  • Bielza Lozoya, María Concepción|||0000-0001-7109-2668
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Classifying GABAergic interneurons with semi-supervised projected model-based clustering

  • Mihaljevic, Bojan|||0000-0002-1656-6135
  • Benavides Piccione, Ruth
  • Guerra Velasco, Luis Pelayo
  • Felipe Oroquieta, Javier de|||0000-0001-5484-0660
  • Larrañaga Múgica, Pedro María|||0000-0003-0652-9872
  • Bielza Lozoya, María Concepción|||0000-0001-7109-2668
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Performance evaluation of database replication systems.

  • Dhamane, Rohit
  • Patiño Martínez, Marta|||0000-0003-2997-3722
  • Vianello, Valerio
  • Jiménez Peris, Ricardo|||0000-0002-5130-9927
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Aplicación móvil para el diagnóstico de cultivos

  • Fernández López-Rey, David
  • Hernández Díaz-Ambrona, Carlos Gregorio|||0000-0003-1452-8757
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

El cultivo de la stevia revolucionará la agricultura andaluza

  • Benítez Villanueva, Gustavo
  • Hernández Díaz-Ambrona, Carlos Gregorio|||0000-0003-1452-8757
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Methodology of quantifying curvature of Fresnel lenses and its effect on CPV module performance

  • Herrero Martín, Rebeca|||0000-0003-4309-6084
  • Domínguez Domínguez, César|||0000-0002-2751-7208
  • Askins, Stephen Alex|||0000-0002-9988-2917
  • Antón Hernández, Ignacio|||0000-0002-6890-5477
  • Sala Pano, Gabriel|||0000-0002-7016-3564
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Deposition reactors for solar grade silicon: a comparative thermal analysis of a Siemens reactor and a fluidized bed reactor

  • Ramos Cabal, Alba
  • Filtvedt, W.O.
  • Lindholm, D.
  • Ramachandran, P.A.
  • Rodríguez, A.
  • Cañizo Nadal, Carlos del|||0000-0003-1287-6854
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Manufacturing arbitrarily-shaped active waveguides with liquid crystal cladding

  • Caño García, Manuel|||0000-0002-4437-4296
  • Delgado, Rodrigo
  • Zuo, Tianyi
  • Geday, Morten Andreas|||0000-0002-5625-1162
  • Quintana Arregui, Patxi Xabier|||0000-0003-4315-2701
  • Otón Sánchez, José Manuel|||0000-0001-8070-9180
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Thermally tunable polarization by nanoparticle plasmonic resonance in photonic crystal fibers

  • Poudereux Sánchez, David
  • Caño García, Manuel|||0000-0002-4437-4296
  • Algorri Genaro, José Francisco
  • García Cámara, Braulio
  • Sánchez Pena, José Manuel
  • Quintana Arregui, Patxi Xabier|||0000-0003-4315-2701
  • Geday, Morten Andreas|||0000-0002-5625-1162
  • Otón Sánchez, José Manuel|||0000-0001-8070-9180
Archivo Digital UPM
Publicación Libro o Monografía (Book)

Libro de Actas del VII Congreso de estudiantes de Ciencia, Tecnología e Ingeniería Agronómica

  • García Rebollar, María del Pilar|||0000-0003-4418-0157
  • Mauleón Pérez, Iñigo
  • Rodríguez Francisco, María
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Determination of spectral variations by means of component cells useful for CPV rating and design

  • Núñez Júdez, Rubén|||0000-0001-9160-5416
  • Domínguez Domínguez, César|||0000-0002-2751-7208
  • Askins, Stephen Alex|||0000-0002-9988-2917
  • Victoria Pérez, Marta
  • Herrero Martín, Rebeca|||0000-0003-4309-6084
  • Antón Hernández, Ignacio|||0000-0002-6890-5477
  • Sala Pano, Gabriel|||0000-0002-7016-3564
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Multi-distributed wireless sensors for monitoring a long distance transport in a reefer container

  • Jiménez Ariza, Heidi Tatiana|||0000-0002-4581-1355
  • Correa Hernando, Eva Cristina|||0000-0002-4508-5066
  • Diezma Iglesias, Belen|||0000-0001-6882-2842
  • Moya Gonzalez, Adolfo|||0000-0001-7313-1851
  • Arranz Saiz, Francisco Javier|||0000-0003-1270-0701
  • Barreiro Elorza, Pilar|||0000-0003-4702-6059
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Thermal shields for heat loss reduction in Siemens-type CVD reactors

  • Ramos Cabal, Alba
  • Valdehita Torija, Javier
  • Zamorano Saavedra, Juan Carlos
  • Cañizo Nadal, Carlos del|||0000-0003-1287-6854
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Demonstration of the operation principles of intermediate band solar cells at room temperature

  • López Estrada, Esther|||0000-0003-4256-9329
  • Datas Medina, Alejandro|||0000-0001-5964-3818
  • Ramiro González, Iñigo|||0000-0002-9663-4002
  • García-Linares Fontes, Pablo|||0000-0003-2369-3017
  • Antolín Fernández, Elisa|||0000-0002-5220-2849
  • Artacho Huertas, Irene|||0000-0003-0213-2966
  • Martí Vega, Antonio|||0000-0002-8841-7091
  • Luque López, Antonio|||0000-0002-8357-6413
  • Shoji, Y.
  • Sogabe, T.
  • Ogura, A.
  • Okada, Y.
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

3D Maize Plant Reconstruction Based on Georeferenced Overlapping LiDAR Point Clouds

  • Garrido Izard, Miguel|||0000-0002-7880-6499
  • Paraforos, Dimitris S.
  • Reiser, David
  • Vázquez Arellano, Manuel
  • Griepentrog, Hans W.
  • Valero Ubierna, Constantino|||0000-0003-4473-3209
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Effect of Sb on the quantum efficiency of GaInP solar cells

  • Barrigón Montañés, Enrique
  • Barrutia Poncela, Laura|||0000-0001-9363-6662
  • Ochoa Gómez, Mario|||0000-0002-7108-3638
  • Rey-Stolle Prado, Ignacio|||0000-0002-4919-5609
  • Algora del Valle, Carlos|||0000-0003-1872-7243
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Inorganic Photovoltaics - Planar and Nanostructured Devices

  • Ramanujam, J.
  • Verma, A.
  • González-Díaz, B.
  • Guerrero-Lemus, R.
  • Cañizo Nadal, Carlos del|||0000-0003-1287-6854
  • García-Tabarés Valdivieso, Elisa|||0000-0002-4080-376X
  • Rey-Stolle Prado, Ignacio|||0000-0002-4919-5609
  • Granek, F.
  • Korte, L.
  • Tucci, M.
  • Rath, J.
  • Singh, U.P.
  • Todorov, T.
  • Gunawan, O.
  • Rubioara, S.S.
  • Plaza, J.L.
  • Dieguez, E.
  • Hoffmann, B.
  • Christiansen, S.
  • Cirlin, G.E.
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Glycerin and lecithin inclusion in diets for brown egg-layinghens: Effects on egg production and nutrient digestibility

  • Mandalawi, H. A.
  • Lázaro García, Rosa Pilar|||0000-0002-0299-5932
  • Redón, Miguel
  • Herrera, J.
  • Menoyo Luque, David|||0000-0002-2813-1024
  • González Mateos, Gonzalo|||0000-0001-9438-7207
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Semi-quantitative temperature accelerated life test (ALT) for the reliability qualification of concentrator solar cells and cell on carriers

  • Núñez Mendoza, Neftalí|||0000-0003-2339-2441
  • Vázquez López, Manuel|||0000-0003-1070-1751
  • Orlando, Vincenzo
  • Espinet González, Pilar
  • Algora del Valle, Carlos|||0000-0003-1872-7243
Archivo Digital UPM
Publicación Contribución de congreso (ConferenceOutput)

Plan de ordenación de los pastos en la dehesa Lomo Peral, monte de utilidad pública número 106 en Prádena del Rincón (Madrid)

  • Cruz Martín, Irene de la
  • Hernández Díaz-Ambrona, Carlos Gregorio|||0000-0003-1452-8757
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Manufacturing of self-passivating tungsten based alloys by different powder metallurgical routes

  • Calvo, A.
  • Ordás, N.
  • Iturriza, I.
  • Pastor Caño, Jose Ygnacio|||0000-0003-3561-5999
  • Tejado Garrido, Elena María|||0000-0002-5240-6702
  • Palacios García, Teresa|||0000-0001-7777-6518
  • García-Rosales, C.
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Failure detectors in homonymous distributed systems (with an application to consensus)

  • Arévalo Viñuales, Sergio|||0000-0002-0807-0631
  • Jiménez Merino, José Ernesto|||0000-0002-3432-6581
  • Fernández Anta, Antonio
  • Imbs, Damien
  • Raynal, Michel
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Spectral study and classification of worldwide locations considering several multijunction solar cell technologies

  • Núñez Júdez, Rubén|||0000-0001-9160-5416
  • Jin, Chen
  • Victoria Pérez, Marta
  • Domínguez Domínguez, César|||0000-0002-2751-7208
  • Askins, Stephen Alex|||0000-0002-9988-2917
  • Herrero Martín, Rebeca|||0000-0003-4309-6084
  • Antón Hernández, Ignacio|||0000-0002-6890-5477
  • Sala Pano, Gabriel|||0000-0002-7016-3564
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Optimizing phosphorus diffusion for photovoltaic applications: peak doping, inactive phosphorus,gettering, and contact formation

  • Wagner, Hannes
  • Dastgheib-Shirazi, Amir
  • Min, Byungsul
  • Morishige, Ashley E.
  • Steyer, Michael
  • Hahn, Giso
  • Cañizo Nadal, Carlos del|||0000-0003-1287-6854
  • Buonassisi, Tonio
  • Altermatt, Pietro P.
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Solar driven energy conversion applications based on 3C-SiC

  • Sun, Jianwu
  • Jokubavicius, Valdas
  • Gao, Lu
  • Booker, Ian
  • Jansson, Mattias
  • Liu, Xinyu
  • Hofmann, Jan P.
  • Hensen, Emiel J.M.
  • Linnarsson, Margareta
  • Wellmann, Peter
  • Ramiro González, Iñigo|||0000-0002-9663-4002
  • Martí Vega, Antonio|||0000-0002-8841-7091
  • Yakimova, Rositsa
  • Syväjärvi, Mikael
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Ultra high temperature latent heat energy storage and thermophotovoltaic energy conversion

  • Datas Medina, Alejandro|||0000-0001-5964-3818
  • Ramos Cabal, Alba
  • Martí Vega, Antonio|||0000-0002-8841-7091
  • Cañizo Nadal, Carlos del|||0000-0003-1287-6854
  • Luque López, Antonio|||0000-0002-8357-6413
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

The peculiar electrical response of liquid crystal-carbon nanotube systems as seen by impedance spectroscopy

  • García García, Amanda
  • Vergaz Benito, Ricardo|||0000-0002-2304-129X
  • Algorri Genaro, José Francisco
  • Geday, Morten Andreas|||0000-0002-5625-1162
  • Otón Sánchez, José Manuel|||0000-0001-8070-9180
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Mechanical behaviour at high temperature of alkali-activated aluminosilicates (geopolymers)

  • Martin Sanz, Antonia|||0000-0003-1291-948X
  • Pastor Caño, Jose Ygnacio|||0000-0003-3561-5999
  • Palomo, Ángel
  • Fernández Jiménez, A.
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

A survey on multi-output regression

  • Borchani, Hanen
  • Varando, Gherardo
  • Bielza Lozoya, María Concepción|||0000-0001-7109-2668
  • Larrañaga Múgica, Pedro María|||0000-0003-0652-9872
Archivo Digital UPM
Publicación Artículo científico (JournalArticle)

Passenger Exposure to Magnetic Fields due to the Batteries of an Electric Vehicle

  • Moreno-Torres, Pablo
  • Velez García, Pablo
  • Lafoz Pastor, Marcos
  • Rodríguez Arribas, Jaime|||0000-0003-3586-4522