Pasar al contenido principal

PROTECCION ROBOTIZADA DE INFRAESTRUCTURAS CRITICAS

DPI2014-56985-R

•
Nombre agencia financiadora Ministerio de Economía y Competitividad
Acrónimo agencia financiadora MINECO
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2014
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Secretaría de Estado de Educación, Formación Profesional y Universidades
Centro beneficiario UNIVERSIDAD POLITECNICA DE MADRID
Identificador persistente http://dx.doi.org/10.13039/501100003329

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robots Hiper-Redundantes: Clasificación, Estado del Arte y Problemática, Hyper-Redundant Robots: Classification, State-of-the-Art and Issues

  • Martín Barrio, Andrés
  • Terrile, Silvia
  • Barrientos, Antonio
  • del Cerro, Jaime
[ES] Los robots hiper-redundantes son aquellos que tienen un número muy elevado de grados de libertad. En su uso cotidiano, la redundancia es referida para indicar una repetición o un uso excesivo de un concepto. En el campo de la robótica, la redundancia puede ofrecer numerosos beneficios frente a los robots convencionales. Los robots hiper-redundantes poseen una mayor habilidad para sortear obstáculos, son tolerantes a fallos en algunas de sus articulaciones y también pueden ofrecer ventajas cinemáticas. En este artículo se presentan los conceptos generales para entender este tipo de robots, así como una clasificación de los mismos, su potencial, su problemática y su evolución a lo largo de la historia., [EN] Hyper-redundant robots are characterized by having a high number of degrees of freedom. The word redundant is commonly used to mean a repetition or excess of a concept. In the robotics scope, redundancy offers numerous advantages against traditional robots. Hyper-redundant robots provide better skills to avoid obstacles, they are fault-tolerant in some of their joints and exhibit kinematic advantages. This article presents general concepts to understand this kind of robots as well as a classification, their potential, drawbacks and an analysis of their evolution throughout their history., Este trabajo es resultado de las actividades de investigación llevadas a cabo en el Centro de Automática y Robótica (CARUPM-CSIC) de la Universidad Politécnica de Madrid (España), en el seno del grupo de investigación de Robótica y Cibernética (RobCib). Las actividades se enmarcan en los proyectos RoboCity2030-III-CM (Robótica aplicada a la mejora de la calidad de vida de los ciudadanos. Fase III; S2013/MIT-2748) y en el proyecto DPI2014-56985-R (Protección Robotizada de Infraestructuras Críticas) financiado por el Ministerio de Economía y Competitividad del Gobierno de España.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Una revisión de los sistemas multi-robot: desafíos actuales para los operadores y nuevos desarrollos de interfaces, A review on multi-robot systems: current challenges for operators and new developments of interfaces

  • Roldan-Gómez, J. J.
  • de León Rivas, J.
  • Garcia-Aunon, P.
  • Barrientos, A.
[ES] Los sistemas multi-robot están experimentando un gran desarrollo en los últimos tiempos, ya que mejoran el rendimiento de las misiones actuales y permiten realizar nuevos tipos de misiones. Este artículo analiza el estado del arte de los sistemas multi-robot, abordando un conjunto de temas relevantes: misiones, flotas, operadores, interacción humano-sistema e interfaces. La revisión se centra en los retos relacionados con factores humanos como la carga de trabajo o la conciencia de la situación, así como en las propuestas de interfaces adaptativas e inmersivas para solucionarlos., [EN] Multi-robot systems are experiencing great development in recent times, since they are improving the performance of current missions and allowing new types of missions. This article analyzes the state of the art of multi-robot systems, addressing a set of relevant topics: missions, fleets, operators, human-system interaction and interfaces. The review focuses on the challenges related to human factors such as workload and situational awareness, as well as the proposals of adaptive and immersive interfaces to solve them., Esta investigación ha recibido fondos de los proyectos SAVIER (Situational Awareness VIrtual EnviRonment) de Airbus; RoboCity2030-DIH-CM, Madrid Robotics Digital Innovation Hub, S2018/ NMT-4331, financiado por los Programas de Actividades I+D de la Comunidad de Madrid y confinanciado por los Fondos Estructurales de la UE; y DPI2014-56985-R (Protección Robotizada de Infraestructuras Críticas) financiado por el ministerio de Economía y Competitividad del Gobierno de España.
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Interfaz inteligente y adaptativa para personas con discapacidad

  • Taboada, María
  • Roldán, Juan Jesús
  • Barrientos, Antonio
[Resumen] La comunicación es una necesidad básica para los seres humanos, pero existen enfermedades y lesiones que la pueden restringir. Los Sistemas Aumentativos y Alternativos de Comunicación permiten a las personas con discapacidad comunicarse con las personas que las rodean y realizar algunas tareas cotidianas. Este trabajo propone ir más allá en el desarrollo de estas interfaces y proporcionarles un cierto nivel de inteligencia y adaptación. La interfaz desarrollada emplea técnicas de inteligencia artificial y minería de datos para aprender el comportamiento del operador y predecir sus siguientes peticiones. El objetivo de estos algoritmos es doble: por un lado, hacer una selección con las opciones más habituales y, por otro, asignar las posiciones más cómodas a las opciones más probables., Esta investigación ha recibido fondos del proyecto RoboCity2030-III-CM (Robótica aplicada a la mejora de la calidad de vida de los ciudadanos, fase III; S2013/MIT-2748), financiado por los Programas de Actividades I+D en la Comunidad de Madrid y los Fondos Estructurales de la Unión Europea, y del proyecto DPI2014-56985-R (Protección robotizada de infraestructuras críticas), financiado por el Ministerio de Economía y Competitividad del Gobierno de España. Este trabajo está enmarcado en el proyecto SAVIER (Situational Awareness Virtual EnviRonment), que está financiado y apoyado por Airbus Defence & Space, Comunidad de Madrid; S2013/MIT-2748, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Protección multi-robot de infraestructuras: un enfoque cooperativo para entornos con información limitada

  • Garzón Ramos, David
  • Garzón Oviedo, Mario
  • Barrientos, Antonio
[Resumen] Se presenta el diseño, implementación y evaluación de un sistema multi-robot que aporta al aseguramiento de zonas con acceso restringido en infraestructuras, a través de la interceptación de intrusos. Éste, se basa en el aprovechamiento del algoritmo de Fast Marching y provee una solución cooperativa multi-robot capaz de funcionar en condiciones de información limitada. El sistema ha sido probado en escenarios sintéticos y reales, alcanzando en todos los casos la interceptación del objetivo mediante una respuesta cooperativa., Este trabajo fue parcialmente apoyado por el Grupo de Robótica y Cibernética de la Universidad Politécnica de Madrid (España), siendo financiado por los proyectos: PRIC (Protección robotizada de Infraestructuras Críticas; DPI2014-56985-R), patrocinado por el Ministerio español de Economía y Competitividad y RoboCity2030-III-CM (Robótica aplicada a la Mejora de la Calidad de Vida de los Ciudadanos fase III; S2013 /MIT-2748), financiado por Programas de Actividades de I + D en la Comunidad de Madrid y cofinanciado por Fondos Estructurales de la UE, Comunidad de Madrid; S2013/MIT-2748, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Coordinación UAV-UGV para tareas de Búsqueda y Rescate

  • Rodríguez Palafox, Pablo
  • Garzón Oviedo, Mario
  • Barrientos, Antonio
[Resumen] Se presenta un sistema autónomo de Búsqueda y Rescate basado en la coordinación entre un UAV y un UGV (este último funcionando como plataforma móvil de aterrizaje). El vehículo aéreo debe localizar el objetivo en base a una imagen aérea, seguirlo y aterrizar sobre él cuando así le sea indicado. El algoritmo de seguimiento y aterrizaje está basado en la combinaci on de un regulador PID con un algoritmo de predicción (basado este último, a su vez, en un filtro de Kalman) con el que se van obteniendo las posiciones futuras de la plataforma. Ello facilita el seguimiento y, principalmente, el aterrizaje, ya que el UAV puede posicionarse ligeramente por delante de la plataforma de aterrizaje momentos antes de la aproximación final y así poder completar con éxito el aterrizaje., Esta investigación ha recibido fondos del proyecto RoboCity2030-III-CM (Robotica aplicada a la mejora de la calidad de vida de los ciudadanos, fase III; S2013/MIT-2748), financiado por los Programas de Actividades I+D en la Comunidad de Madrid y los Fondos Estructurales de la Unión Europea, y del proyecto DPI2014-56985-R (Protección robotizada de infraestructuras críticas), financiado por el Ministerio de Economía y Competitividad del Gobierno de España, Comunidad de Madrid; S2013/MIT-2748, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Modelo cinemático de un robot hexápodo con C-legs

  • Tordesillas Torres, Jesús
  • León Rivas, Jorge de
  • Cerro, Jaime del
  • Barrientos, Antonio
[Resumen] En este artículo se profundiza en el modelado matemático de la odometría para robots hexápodos con extremidades denominadas C-legs. El estudio no es trivial, y se analizan todas las posibilidades que puede tener el sistema según las variables que se definan. Todo el estudio se ve reforzado con una serie de simulaciones realizadas donde los resultados obtenidos coinciden con los esperados., Esta investigación ha recibido fondos del proyecto RoboCity2030-III-CM (Robótica aplicada a la mejora de la calidad de vida de los ciudadanos. Fase III; S2013/MIT-2748), financiado por los Programas de Actividades I+D en la Comunidad de Madrid y los Fondos Estructurales de la Unión Europea, y del proyecto DPI2014-56985-R (Protección robotizada de infraestructuras críticas), financiado por el Ministerio de Economía y Competitividad del Gobierno de España, Comunidad de Madrid; S2013/MIT‐2748, https://doi.org/10.17979/spudc.9788497498081
RUC. Repositorio da Universidade da Coruña
Publicación Contribución de congreso (ConferenceOutput)

Modelado y análisis de misiones multi-robot mediante minería de procesos

  • Díez, Félix
  • Roldán, Juan Jesús
  • Barrientos, Antonio
[Resumen] Las misiones multi-robot pueden alcanzar una complejidad comparable a los procesos industriales y la gestión de las empresas o los servicios públicos. La minería de procesos es una disciplina emergente que se está aplicando con éxito al análisis de estos sistemas. Esta disciplina aborda el modelado, el análisis y la mejora de procesos a partir de la información contenida en registros de eventos. Este artículo propone la aplicación de la minería de procesos en el contexto de las misiones con múltiples robots. En concreto, este trabajo realiza dos contribuciones novedosas: la definición de un protocolo para la utilización de estas técnicas en el contexto de la robótica, y la aplicación en un escenario real de vigilancia y extinción de incendios con una flota de UAVs. Los resultados muestran el potencial de esta herramienta para el análisis de misiones, la detección de problemas como cuellos de botella o asignaciones de recursos ineficientes y la propuesta de mejoras., Esta investigación ha recibido fondos del proyecto RoboCity2030-III-CM (Robótica aplicada a la mejora de la calidad de vida de los ciudadanos. Fase III; S2013/MIT-2748), financiado por los Programas de Actividades I+D en la Comunidad de Madrid y los Fondos Estructurales de la Unión Europea, y del proyecto DPI2014-56985-R (Protección robotizada de infraestructuras críticas), financiado por el Ministerio de Economía y Competitividad del Gobierno de España, Comunidad de Madrid; S2013/MIT-2748, https://doi.org/10.17979/spudc.9788497498081
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Heterogeneous multi-robot system for mapping environmental variables of greenhouses

  • Roldán Gómez, Juan J.
  • García-Aunon, Pablo
  • Garzón, Mario
  • de-León, Jorge
  • Cerro, Jaime del
  • Barrientos, Antonio
The productivity of greenhouses highly depends on the environmental conditions of crops, such as temperature and humidity. The control and monitoring might need large sensor networks, and as a consequence, mobile sensory systems might be a more suitable solution. This paper describes the application of a heterogeneous robot team to monitor environmental variables of greenhouses. The multi-robot system includes both ground and aerial vehicles, looking to provide flexibility and improve performance. The multi-robot sensory system measures the temperature, humidity, luminosity and carbon dioxide concentration in the ground and at different heights. Nevertheless, these measurements can be complemented with other ones (e.g., the concentration of various gases or images of crops) without a considerable effort. Additionally, this work addresses some relevant challenges of multi-robot sensory systems, such as the mission planning and task allocation, the guidance, navigation and control of robots in greenhouses and the coordination among ground and aerial vehicles. This work has an eminently practical approach, and therefore, the system has been extensively tested both in simulations and field experiments., The research leading to these results has received funding from the RoboCity2030-III-CM project (Robótica aplicada a la mejora de la calidad de vida de los ciudadanos. fase III; S2013/MIT-2748), funded by Programas de Actividades I+ D en la Comunidad de Madrid and co-funded by Structural Funds of the EU, and from the DPI2014-56985-Rproject (Protección robotizada de infraestructuras críticas) funded by the Ministerio de Economía y Competitividad of Gobierno de España. This work is framed on the SAVIER (Situational Awareness Virtual EnviRonment) Project, which is both supported and funded by Airbus Defence & Space. The experiments were performed in an educational greenhouse of the E.T.S.I.Agrónomos of Technical University of Madrid., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-robot interfaces and operator situational awareness: Study of the impact of immersion and prediction

  • Roldán Gómez, Juan J.
  • Peña-Tapia, Elena
  • Martín-Barrio, Andrés
  • Olivares Méndez, Miguel A.
  • Cerro, Jaime del
  • Barrientos, Antonio
Multi-robot missions are a challenge for operators in terms of workload and situational awareness. These operators have to receive data from the robots, extract information, understand the situation properly, make decisions, generate the adequate commands, and send them to the robots. The consequences of excessive workload and lack of awareness can vary from inefficiencies to accidents. This work focuses on the study of future operator interfaces of multi-robot systems, taking into account relevant issues such as multimodal interactions, immersive devices, predictive capabilities and adaptive displays. Specifically, four interfaces have been designed and developed: a conventional, a predictive conventional, a virtual reality and a predictive virtual reality interface. The four interfaces have been validated by the performance of twenty-four operators that supervised eight multi-robot missions of fire surveillance and extinguishing. The results of the workload and situational awareness tests show that virtual reality improves the situational awareness without increasing the workload of operators, whereas the effects of predictive components are not significant and depend on their implementation., This work is framed on SAVIER (Situational Awareness Virtual EnviRonment) Project, which is both supported and funded by Airbus Defence & Space. The research leading to these results has received funding from the RoboCity2030-III-CM project (Robótica aplicada a la mejora de la calidad de vida de los ciudadanos. Fase III; S2013/MIT-2748), funded by Programas de Actividades I+D en la Comunidad de Madrid and cofunded by Structural Funds of the EU, and from the DPI2014-56985-R project (Protección robotizada de infraestructuras críticas) funded by the Ministerio de Economía y Competitividad of Gobierno de España. We would like to thank to the students of Technical University of Madrid that took part in the experiments and provided us valuable information., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bringing Adaptive and Immersive Interfaces to Real-World Multi-Robot Scenarios: Application to Surveillance and Intervention in Infrastructures

  • Roldán, Juan Jesús
  • Peña-Tapia, Elena
  • García-Aunon, Pablo
  • Cerro, Jaime del
  • Barrientos, Antonio
Multiple robot missions imply a series of challenges for single human operators, such as managing high workloads or maintaining a correct level of situational awareness. Conventional interfaces are not prepared to face these challenges; however, new concepts have arisen to cover this need, such as adaptive and immersive interfaces. This paper reports the design and development of an adaptive and immersive interface, as well as a complete set of experiments carried out to establish comparisons with a conventional one. The interface object of study has been developed using virtual reality to bring operators into scenarios and allow an intuitive commanding of robots. Additionally, it is able to recognize the mission's state and show hints to the operators. The experiments were performed in both outdoor and indoor scenarios recreating an intervention after an accident in critical infrastructure. The results show the potential of adaptive and immersive interfaces in the improvement of workload, situational awareness and performance of operators in multi-robot missions., This work was supported in part by the SAVIER (Situational Awareness VIrtual EnviRonment) project of Airbus Defence and Space; RoboCity2030-III-CM project (Robótica aplicada a la mejora de la calidad de vida de los ciudadanos. Fase III; S2013/MIT-2748), through the Programas de Actividades I+D en la Comunidad de Madrid and Structural Funds of the EU, and in part by the DPI2014-56985-R project (Protección robotizada de infraestructuras críticas) through the Ministerio de Economía y Competitividad of Gobierno de España, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A training system for Industry 4.0 operators in complex assemblies based on virtual reality and process mining

  • Roldán, Juan Jesús
  • Crespo, Elena
  • Martín-Barrio, Andrés
  • Peña-Tapia, Elena
  • Barrientos, Antonio
Industry 4.0 aims at integrating machines and operators through network connections and information management. It proposes the use of a set of technologies in industry, such as data analysis, Internet of Things, cloud computing, cooperative robots, and immersive technologies. This paper presents a training system for industrial operators in assembly tasks, which takes advantage of tools such as virtual reality and process mining. First, expert workers use an immersive interface to perform assemblies according to their experience. Then, process mining algorithms are applied to obtain assembly models from event logs. Finally, trainee workers use an improved immersive interface with hints to learn the assemblies that the expert workers introduced in the system. A toy example has been developed with building blocks and tests have been performed with a set of volunteers. The results show that the proposed training system, based on process mining and virtual reality, is competitive against conventional alternatives. Furthermore, user evaluations are better in terms of mental demand, perception, learning, results, and performance., The research leading to these results has received funding from RoboCity2030-III-CM project (Robótica aplicada a la mejora de la calidad de vida de los ciudadanos. Fase III; S2013/MIT-2748), funded by Programas de Actividades I+D en la Comunidad de Madrid and cofunded by Structural Funds of the EU; and from the DPI2014-56985-R project (Protección robotizada de infraestructuras críticas) funded by the Ministerio de Economía y Competitividad of Gobierno de España., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Monitoring traffic in future cities with aerial swarms: Developing and optimizing a behavior-based surveillance algorithm

  • García-Aunon, Pablo
  • Roldán, Juan Jesús
  • Barrientos, Antonio
Traffic monitoring is a key issue to develop smarter and more sustainable cities in the future, allowing to make a better use of the public space and reducing pollution. This work presents an aerial swarm that continuously monitors the traffic in SwarmCity, a simulated city developed in Unity game engine where drones and cars are modeled in a realistic way. The control algorithm of the aerial swarm is based on six behaviors with twenty-three parameters that must be tuned. The optimization of parameters is carried out with a genetic algorithm in a simplified and faster simulator. The best resulting configurations are tested in SwarmCity showing good efficiencies in terms of observed cars over total cars during time windows. The algorithm reaches a good performance making use of an acceptable computational time for the optimization., This work is part of the SwarmCity project: monitoring future cities with intelligent flying swarms, developed by the Robotics and Cybernetics Research Group of the Centre for Automation and Robotics (UPM-CSIC). The research leading to these results has received funding from the SAVIER (Situational Awareness VIrtual EnviRonment) project of Airbus Defence & Space; RoboCity2030-III-CM project (Robótica aplicada a la mejora de la calidad de vida de los ciudadanos. Fase III; S2013/MIT-2748), funded by Programas de Actividades I + D en la Comunidad de Madrid and cofunded by Structural Funds of the EU; and from the DPI2014-56985-R project (Protección robotizada de infraestructuras críticas) funded by the Ministerio de Economía y Competitividad of Gobierno de España., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robust Visual-Aided Autonomous Takeoff, Tracking, and Landing of a Small UAV on a Moving Landing Platform for Life-Long Operation

  • Palafox, Pablo R.
  • Garzón, Mario
  • Valente, João
  • Roldán, Juan Jesús
  • Barrientos, Antonio
Robot cooperation is key in Search and Rescue (SaR) tasks. Frequently, these tasks take place in complex scenarios affected by different types of disasters, so an aerial viewpoint is useful for autonomous navigation or human tele-operation. In such cases, an Unmanned Aerial Vehicle (UAV) in cooperation with an Unmanned Ground Vehicle (UGV) can provide valuable insight into the area. To carry out its work successfully, such as multi-robot system requires the autonomous takeoff, tracking, and landing of the UAV on the moving UGV. Furthermore, it needs to be robust and capable of life-long operation. In this paper, we present an autonomous system that enables a UAV to take off autonomously from a moving landing platform, locate it using visual cues, follow it, and robustly land on it. The system relies on a finite state machine, which together with a novel re-localization module allows the system to operate robustly for extended periods of time and to recover from potential failed landing maneuvers. Two approaches for tracking and landing are developed, implemented, and tested. The first variant is based on a novel height-adaptive PID controller that uses the current position of the landing platform as the target. The second one combines this height-adaptive PID controller with a Kalman filter in order to predict the future positions of the platform and provide them as input to the PID controller. This facilitates tracking and, mainly, landing. Both the system as a whole and the re-localization module in particular have been tested extensively in a simulated environment (Gazebo). We also present a qualitative evaluation of the system on the real robotic platforms, demonstrating that our system can also be deployed on real robotic platforms. For the benefit of the community, we make our software open source., The research leading to these results received funding from RoboCity2030-DIH-CM, Madrid Robotics Digital Innovation Hub, S2018/NMT-4331, funded by “Programas de Actividades I+Den la Comunidad de Madrid” and cofunded by Structural Funds of the EU, and from the project DPI2014-56985-R (Robotic protection of critical infrastructures), financed by the Ministry of Economy and Competitiveness of the Government of Spain., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Una revisión de los sistemas multi-robot: Desafíos actuales para los operadores y nuevos desarrollos de interfaces, A review on multi-robot systems: Current challenges for operators and new developments of interfaces

  • Roldán-Gómez, J. J.
  • León Rivas, J. de
  • García-Aunón, P.
  • Barrientos, Antonio
Los sistemas multi-robot están experimentando un gran desarrollo en los últimos tiempos, ya que mejoran el rendimiento de las misiones actuales y permiten realizar nuevos tipos de misiones. Este artículo analiza el estado del arte de los sistemas multirobot, abordando un conjunto de temas relevantes: misiones, flotas, operadores, interacción humano-sistema e interfaces. La revisión se centra en los retos relacionados con factores humanos como la carga de trabajo o la conciencia de la situación, así como en las propuestas de interfaces adaptativas e inmersivas para solucionarlos., Multi-robot systems are experiencing great development in recent times, since they are improving the performance of current missions and allowing new types of missions. This article analyzes the state of the art of multi-robot systems, addressing a set of relevant topics: missions, fleets, operators, human-system interaction and interfaces. The review focuses on the challenges related to human factors such as workload and situational awareness, as well as the proposals of adaptive and immersive interfaces to solve them., Esta investigación ha recibido fondos de los proyectos SAVIER (Situational Awareness VIrtual EnviRonment) de Airbus; RoboCity2030-DIH-CM, Madrid Robotics Digital Innovation Hub, S2018/ NMT-4331, financiado por los Programas de Actividades I+D de la Comunidad de Madrid y confinanciado por los Fondos Estructurales de la UE; y DPI2014-56985-R (Protección Robotizada de Infraestructuras Críticas) financiado por el ministerio de Economía y Competitividad del Gobierno de España., Peer reviewed