Pasar al contenido principal

ESTUDIO DE NUEVOS MATERIALES INTELIGENTES BASADOS EN NANOCOMPUESTOS POLIMERICOS MULTIFUNCIONALES CON MEMORIA DE FORMA

MAT2017-88123-P

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Fomento de la Investigación Científica y Técnica de Excelencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 31
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Shape memory effect on electrospun PLA-based fibers tailoring their thermal response

  • Leones, Adrián
  • Lopez, Daniel
  • Fiori, Stefano
  • Peponi, Laura
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
[EN] A research on the thermally-activated shape memory behavior of electrospun nanofibers based on polylactic acid (PLA) plasticized with its oligomer (OLA) was conducted with the purpose of obtaining a suitable material to be used in potential biomedical applications. Three different PLA-OLA formulations with 70:30, 80:20 and 90:10 ratios were processed by electrospinning and studied in order to decrease the PLA glass transition temperature to a temperature closer to the human body. For each electrospun formulation mat, the average diameter of electrospun fibers was found to be 757 +/- 193 nm for neat PIA and 768 +/- 207 nm, 620 +/- 121 nm and 476 +/- 80 nm for PLA-OLA 90:10, 80:20 and 70:30 ratios, respectively and correlate it with their mechanical response. First of all, the PLA capability to present shape memory behavior even in non-woven electrospun fibers form has been studied at 60 degrees C. Thus, two values of switching temperatures (45 degrees C and 40 degrees C) were selected in order to evaluate their shape memory response, being temperatures close to the human body temperature. The recovery and fixity ratio of PLA-OLA formulations studied here showed suitable shape memory behavior of the electrospun systems with excellent values of strain fixity as well as strain recovery ratios indicating these materials appropriate for potential biomedical application., Authors thank the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO) (MAT2017-88123-P, POLYMAGIC: (PCIN-2017-036) cofinanced with FEDER funds. A.S. and L.P. acknowledge the "Juan de la Cierva" (FJCI-2015-24405) and "Ramon y Cajal" (RYC-2014-15595) contracts from MINEICO, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Thermally-activated shape memory effect on biodegradable nanocomposites based on PLA/PCL blend reinforced with hydroxyapatite

  • Peponi, Laura
  • Sessini, V.
  • Arrieta, Marina Patricia
  • Navarro-Baena, Iván
  • Dominici, F.
  • Torre, L.
  • Tercjak, Agnieszka
  • López García, Daniel
  • Kenny, J.M.
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Giménez Torres, Enrique|||0000-0002-6330-0209
[EN] In this work, the effect of the addition of different amount of nanosized hydroxyapatite (nHA) on the shape memory behavior of blends based on poly (lactic acid) (PLA) and poly (epsilon-caprolactone) (PCL) has been studied. In particular PLA/PCL blend with 70 wt % PLA has been reinforced with 0.5, 1 and 3 wt % nHA. Moreover, the relationship between the morphology and the final properties of the nanocomposites has been investigated by field emission scanning electron microscopy, confocal Raman spectroscopy and atomic force microscopy. In particular, PeakForce has been used to study quantitative nanomechanical properties of the multifunctional materials leading to conclusion that nHA increase the phase separation between PLA and PCL as well as act as reinforcements for the PCL-rich phase of the nanocomposites. Furthermore, excellent thermally-activated shape memory response has been obtained for all the nanocomposites at 55 degrees C. Finally, the disintegration under composting conditions at laboratory scale level was studied in order to confirm the biodegradable character of these nanocomposites. Indeed, these materials are able to be used for biomedical issues as well as for packaging applications where both thermally-activated shape memory effect and biodegradability are requested., Authors thank the Spanish Ministry of Economy, Industry and Competitiveness, MINEICO, (MAT2017-88123-P) and the Regional Government of Madrid (S2013/MIT-2862) for the economic support. M.P.A. and L.P. acknowledge the Juan de la Cierva (FJCI-2014-20630) and Ramon y Cajal (RYC-2014-15595) contracts from the MINEICO, respectively. The authors also thanks CSIC for the I-Link project (I-Link1149).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multifunctional PLA Blends Containing Chitosan Mediated Silver Nanoparticles: Thermal, Mechanical, Antibacterial, and Degradation Properties

  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Madani, Salim
  • Rodríguez, Gema
  • Hevilla, Víctor
  • Echeverría, Coro
  • Fernández-Garcia, Marta
  • Muñoz-Bonilla, Alexandra
  • Charef, Noureddine
  • López, Daniel
[EN] Poly(lactic acid) (PLA) is one of the most commonly employed synthetic biopolymers for facing plastic waste problems. Despite its numerous strengths, its inherent brittleness, low toughness, and thermal stability, as well as a relatively slow crystallization rate represent some limiting properties when packaging is its final intended application. In the present work, silver nanoparticles obtained from a facile and green synthesis method, mediated with chitosan as a reducing and stabilizing agent, have been introduced in the oligomeric lactic acid (OLA) plasticized PLA in order to obtain nanocomposites with enhanced properties to find potential application as antibacterial food packaging materials. In this way, the green character of the matrix and plasticizer was preserved by using an eco-friendly synthesis protocol of the nanofiller. The X-ray diffraction (XRD) and differential scanning calorimetry (DSC) results proved the modification of the crystalline structure as well as the crystallinity of the pristine matrix when chitosan mediated silver nanoparticles (AgCH-NPs) were present. The final effect over the thermal stability, mechanical properties, degradation under composting conditions, and antimicrobial behavior when AgCH-NPs were added to the neat plasticized PLA matrix was also investigated. The obtained results revealed interesting properties of the final nanocomposites to be applied as materials for the targeted application., This research was funded by Spanish Ministry of Science, Innovation and Universities (AEI-MICINN/FEDER); Projects MAT2016-78437-R and MAT2017-88123-P. A.S. acknowledges her APOSTD/2018/228 postdoctoral contract from the Education, Research, Culture and Sport Council from the Government of Valencia. C.E. acknowledges IJCI-2015-26432 contract from MICINN.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradable and Antimicrobial PLA-OLA Blends Containing Chitosan-Mediated Silver Nanoparticles with Shape Memory Properties for Potential Medical Applications

  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Madani, Salim
  • Muñoz-Bonilla, Alexandra
  • Fernández-Garcia, Marta
  • Peponi, Laura
  • Leones, Adrián
  • Rodríguez, Gema
  • Echeverría, Coro
  • López, Daniel
[EN] To use shape memory materials based on poly (lactic acid) (PLA) for medical applications is essential to tune their transition temperature (T-trans) near to the human body temperature. In this study, the combination of lactic acid oligomer (OLA), acting as a plasticizer, together with chitosan-mediated silver nanoparticles (AgCH-NPs) to create PLA matrices is studied to obtain functional shape memory polymers for potential medical applications. PLA/OLA nanocomposites containing different amounts of AgCH-NPs were obtained and profusely characterized relating their structure with their antimicrobial and shape memory performances. Nanocomposites exhibited shape memory responses at the temperature of interest (near physiological one), as well as excellent shape memory responses, shorter recovery times and higher recovery ratios (over 100%) when compared to neat materials. Moreover, antibacterial activity tests confirmed biocidal activity; therefore, these functional polymer nanocomposites with shape memory, degradability and biocidal activity show great potential for soft actuation applications in the medical field., This research was funded by Spanish Ministry of Science and Innovation (AEIMICINN/FEDER); Projects MAT2016-78437-R, MAT2017-88123-P and PCIN-2017-036. A. S. acknowledges her ¿APOSTD/2018/228¿ and ¿PAID-10-19¿ postdoctoral contracts from the Education, Research, Culture and Sport Council from the Government of Valencia and from the Polytechnic University of Valencia, respectively. C.E. acknowledges the IJCI-2015-26432 contract from MICINN. L.P. acknowledges the Ramon y Cajal (RYC-2014-15595) contract from MICINN.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermally-activated shape memory effect on biodegradable nanocomposites based on PLA/PCL blend reinforced with hydroxyapatite

  • Peponi, Laura
  • Sessini, Valentina
  • Arrieta, Marina P.
  • Navarro-Baena, Iván
  • Sonseca, Águeda
  • Dominici, F.
  • Giménez, E.
  • Torre, L.
  • Tercjak, Agnieszka
  • López García, Daniel
  • Kenny, José María
In this work, the effect of the addition of different amount of nanosized hydroxyapatite (nHA) on the shape memory behavior of blends based on poly (lactic acid) (PLA) and poly (ε-caprolactone) (PCL) has been studied. In particular PLA/PCL blend with 70 wt % PLA has been reinforced with 0.5, 1 and 3 wt % nHA. Moreover, the relationship between the morphology and the final properties of the nanocomposites has been investigated by field emission scanning electron microscopy, confocal Raman spectroscopy and atomic force microscopy. In particular, PeakForce has been used to study quantitative nanomechanical properties of the multifunctional materials leading to conclusion that nHA increase the phase separation between PLA and PCL as well as act as reinforcements for the PCL-rich phase of the nanocomposites. Furthermore, excellent thermally-activated shape memory response has been obtained for all the nanocomposites at 55 °C. Finally, the disintegration under composting conditions at laboratory scale level was studied in order to confirm the biodegradable character of these nanocomposites. Indeed, these materials are able to be used for biomedical issues as well as for packaging applications where both thermally-activated shape memory effect and biodegradability are requested., Authors thank the Spanish Ministry of Economy, Industry and Competitiveness, MINEICO, (MAT2017-88123-P) and the Regional Government of Madrid (S2013/MIT-2862) for the economic support. M.P.A. and L.P. acknowledge the “Juan de la Cierva” (FJCI-2014- 20630) and “Ramon y Cajal” (RYC-2014-15595) contracts from the MINEICO, respectively. The authors also thanks CSIC for the I-Link project (I-Link1149), Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Melt-processing of bionanocomposites based on ethylene-co-vinyl acetate and starch nanocrystals

  • Sessini, Valentina
  • Raquez, Jean-Marie
  • Kenny, José María
  • Dubois, Philippe
  • Peponi, Laura
Starch nanocrystals (SNCs) were successfully synthesized by acid hydrolysis of waxy barley starch and were characterized by X-ray diffraction, scanning and transmission electron microscopy. Nanocomposites based on ethylene-co-vinyl acetate (EVA) and SNCs were produced by melt-processing using a microextruder. Interesting is to note that SNCs do not lose their crystalline nature during melt-processing. Moreover, the mechanical and thermal properties of the neat matrix were improved by the addition of SNCs thanks to the strong hydrogen bonding between the nanofillers surface and the acetate groups of the matrix. The introduction of 2 wt.% and 5 wt.% of SNCs into the matrix, lead to an increase of its elastic modulus of about 50% and 100%, respectively. Moreover, the addition of SNCs provoked an increase of the thermal stability of about 10 °C respect to the neat matrix. These results clearly revealed the possibility to introduce SNCs in a polymeric matrix by extrusion enabling to reach materials with enhanced mechanical and thermal properties due to beneficial hydrogen bonding between SNCs and EVA., Authors thank the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO) for MAT2017-88123-P and M-ERANET POLYMAGIC: PCIN-2017-036. L.P. acknowledges the “Ramon y Cajal” (RYC-2014-15595) contract from the MINEICO. JMR is a FRS-FNRS research associate. The authors also thank CSIC for the I-Link project (ILink1149)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal and composting degradation of EVA/Thermoplastic starch blends and their nanocomposites

  • Sessini, Valentina
  • Arrieta, Marina P.
  • Raquez, Jean-Marie
  • Dubois, Philippe
  • Kenny, José María
  • Peponi, Laura
In this work, the thermal degradation and the disintegrability under composting conditions of melt-processed blends based on ethylene-vinyl acetate and thermoplastic starch, EVA/TPS, as well as their nanocomposites, reinforced with natural bentonite, were studied. A special emphasis was first put on the influence of starch on the morphology, thermomechanical properties and hydrophilicity of these blends before composting analysis. In fact, the materials were characterized in terms of morphological, mechanical, thermal and structural properties as well as wettability performance, obtaining information about the immiscibility of the blends and their compatibilization when natural bentonite is used. The thermal stability of starch was increased according with the EVA content in the blend, while the compatibility between both polymeric phases was increased by adding the nanoclays. Consequently, the disintegration under composting condition at laboratory scale level of the obtained materials was conducted and the thermal and chemical-structural properties as well as the surface microstructural changes of recovered samples at different stages of disintegration were studied. Disintegration tests showed that EVA/TPS blends and their nanocomposites presented positive interactions, which delay the disintegration of TPS matrix in compost, thus improving TPS stability. Moreover, blending biodegradable polymers such as TPS with non-biodegradable polymers like EVA leads to the increase of compostable polymer percentage in partially-degradable materials giving a possible solution for the end-life of these materials after their use., The Spanish Ministry of Economy and Competitiveness (MINECO, MAT2017-88123-P and M-ERANET POLYMAGIC: PCIN-2017-036.), Regional Government of Madrid (S2013/MIT-2862) and Spanish National Research Council (CSIC, I-LINK1149) are acknowledged for the financial support. M.P.A. and L.P. acknowledge for Juan de la Cierva (FJCI-2014-20630) and Ramon y Cajal (RYC-2014-15595) contracts from the MINECO, respectively. JMR is a FRS-FNRS Research Associate., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

Antioxidant Bilayers Based on PHBV and Plasticized Electrospun PLA-PHB Fibers Encapsulating Catechin

  • Arrieta, Marina P.
  • Díez García, Alberto
  • López García, Daniel
  • Fiori, Stefano
  • Peponi, Laura
The main objective of this work was to develop bio-based and biodegradable bilayer systems with antioxidant properties. The outer layer was based on a compression-molded poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)-based material while antioxidant electrospun fibers based on poly(lactic acid) (PLA) and poly(3-hydroxybutyrate) (PHB) blends formed the inner active layer. In particular, PLA was blended with 25 wt% of PHB to increase the crystallinity of the fibers and reduce the fiber defects. Moreover, in order to increase the stretchability and to facilitate the electrospinning process of the fiber mats, 15 wt% of oligomeric lactic acid was added as a plasticizer. This system was further loaded with 1 wt% and 3 wt% of catechin, a natural flavonoid with antioxidant activity, to obtain antioxidant-active mats for active food packaging applications. The obtained bilayer systems showed effective catechin release capacity into a fatty food simulant. While the released catechin showed antioxidant effectiveness. Finally, bilayer films showed appropriate disintegration in compost conditions in around three months. Thus, showing their potential as bio-based and biodegradable active packaging for fatty food products., This research was funded by the Ministerio de Ciencia, Innovación y Universidades (MICINN, Spain), the Agencia Nacional de Investigación (AEI, Spain) and el Fondo Europeo de Desarrollo Regional (FEDER, EU), project number MAT2017-88123-P. M.P. Arrieta thanks Universidad Complutense de Madrid for her postdoctoral contract (Ayuda posdoctoral de formación en docencia e investigación en los Departamentos de la UCM). L. Peponi thanks MICINN for her “Ramon y Cajal” contract RYC-2014-15595., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoresponsive Poly(N-Isopropylacrylamide-co-Dimethylaminoethyl Methacrylate) Microgel Aqueous Dispersions with Potential Antimicrobial Properties

  • Echeverría, Coro
  • Aragón-Gutiérrez, Alejandro
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
  • López García, Daniel
The work herein describes the preparation of thermoresponsive microgels with potential antimicrobial properties. Most of the work performed so far regarding microgels with antimicrobial activity, deals with the ability of microgels to carry and release antibiotics or antimicrobial agents (antimicrobial peptides). The originality of this work lies in the possibility of developing intrinsic antimicrobial microgels by copolymerization of the well-known thermoresponsive monomer, <i>N</i>-isopropylacrylamide (NIPAM) with dimethylaminoethyl methacrylate (DMAEMA), a water-soluble monomer, to form microgels via precipitation polymerization (radical polymerization). Due to the presence of a tertiary amine in the DMAEMA comonomer, microgels can be modified by <i>N</i>-alkylation reaction with methyl and butyl iodide. This quaternization confers positive charges to the microgel surfaces and thus the potential antimicrobial activity. The effect of DMAEMA content and its quaternization with both, methyl and butyl iodide is evaluated in terms of thermal and surface charge properties, as well as in the microgel size and viscoelastic behavior. Finally, a preliminary study of the antimicrobial activity against different microorganisms is also performed in terms of minimum inhibitory concentration (MIC). From this study we determined that in contrast with butylated microgels, methylated ones show potential antimicrobial activity and good physical properties besides of maintaining microgel thermo-responsiveness., This work was funded by MAT2017-88123-P and MAT2016-78437-R (FEDER–EU). CE also acknowledges IJCI-2015-26432 contract from MINEICO., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Mechanical properties of L-lysine based segmented polyurethane vascular grafts and their shape memory potential

  • Castillo-Cruz, O.
  • Avilés, F.
  • Vargas-Coronado, R.
  • Cauich-Rodríguez, Juan V.
  • Chan-Chan, L. H.
  • Sessini, Valentina
  • Peponi, Laura
Segmented polyurethanes based on polycaprolactone, 4,4 (metylene-bis-cyclohexyl) isocyanate, and L-lysine were synthesized, manufactured as small vascular grafts and characterized according to ISO 7198 standard for cardiovascular implants—tubular vascular prosthesis. In terms of mechanical properties, the newly synthesized polyurethane films exhibited lower secant modulus than Tecoflex™ SG 80A, a well-known medical grade polyurethane. Similarly, when tested as grafts, the L-lysine-based polyurethane exhibited lower longitudinal failure load (11.5 N vs. 116 N), lower circumferential failure load per unit length (5.67 N/mm vs. 14.0 N/mm) and lower suture forces for both nylon (13.3 N vs. 24.0 N) and silk (14.0 N vs. 19.3 N) when compared to Tecoflex™ SG 80A grafts. L-Lysine-based graft exhibited a burst strength of 3620 mmHg (482.6 kPa) and a compliance of 0.16%/mmHg. The cell adhesion was demonstrated with NIH/3T3 fibroblasts where cell adhesion was observed on both films and grafts, while cell alignment was observed only on the grafts. The mechanical properties of this polyurethane and the possibility of strain-induced PCL crystals as the switching phase for shape memory materials, allowed a strain recovery ratio and a strain fixity ratio with values higher than 95% and 90%, respectively, with a repeatability of the shape-memory properties up to 4 thermo-mechanical cycles. Overall, the properties of lysine-based polyurethanes are suitable for large diameter vascular grafts where cell alignment can be controlled by their shape memory potential., The work was supported by Consejo Nacional de Ciencia y Tecnología (CONACYT) Mexico (Projects 1360 and 248378). O. Castillo-Cruz acknowledges a scholarship from Consejo Nacional de Ciencia y Tecnología (CONACYT) to pursue his doctoral work. L. Peponi and V. Sessini thanks the Spanish Ministry of Economy, Industry and Competitiveness, known in spanish as MINEICO, (MAT2017- 88123-P) for the economic support and L.Peponi acknowledges the “Ramon y Ceajal” (RYC-2014-15595) contract from the MINEICO, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Shape memory effect on electrospun PLA-based fibers tailoring their thermal response

  • Leonés, Adrián
  • Sonseca, Águeda
  • López García, Daniel
  • Fiori, Stefano
  • Peponi, Laura
A research on the thermally-activated shape memory behavior of electrospun nanofibers based on polylactic acid (PLA) plasticized with its oligomer (OLA) was conducted with the purpose of obtaining a suitable material to be used in potential biomedical applications. Three different PLA-OLA formulations with 70:30, 80:20 and 90:10 ratios were processed by electrospinning and studied in order to decrease the PLA glass transition temperature to a temperature closer to the human body. For each electrospun formulation mat, the average diameter of electrospun fibers was found to be 757 ± 193 nm for neat PLA and 768 ± 207 nm, 620 ± 121 nm and 476 ± 80 nm for PLA-OLA 90:10, 80:20 and 70:30 ratios, respectively and correlate it with their mechanical response. First of all, the PLA capability to present shape memory behavior even in non-woven electrospun fibers form has been studied at 60 °C. Thus, two values of switching temperatures (45 °C and 40 °C) were selected in order to evaluate their shape memory response, being temperatures close to the human body temperature. The recovery and fixity ratio of PLA-OLA formulations studied here showed suitable shape memory behavior of the electrospun systems with excellent values of strain fixity as well as strain recovery ratios indicating these materials appropriate for potential biomedical application., Authors thank the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO) (MAT2017-88123-P, POLYMAGIC: (PCIN- 2017-036) cofinanced with FEDER funds. A.S. and L.P. acknowledge the “Juan de la Cierva” (FJCI-2015-24405) and “Ramon y Cajal” (RYC- 2014-15595) contracts from MINEICO, respectively, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antibacterial PLA Fibers Containing Thiazolium Groups as Wound Dressing Materials

  • Echeverría, Coro
  • Muñoz-Bonilla, Alexandra
  • Cuervo-Rodríguez, Rocío
  • López García, Daniel
  • Fernández-García, Marta
The development of inherent antimicrobial polymeric fibers can contribute to overcoming the increasing problem of infectious diseases and multiresistant microorganisms. Here, we propose the preparation of poly(lactic acid) (PLA) based electrospun fibers blended with poly[2-(4-methylthiazol-5-yl)ethyl methacrylate] (PMTA), which quaternized have proven broad spectrum antimicrobial activity either in solution or solid state. We have demonstrated that quaternized PLA/PMTA fiber mats have a remarkable antibacterial activity against S. aureus. As determined by scanning electron microscopy and Raman spectroscopy, quaternized PMTA segregates toward the outmost surface of PLA/PMTA fiber leaving the thiazolium group widely available onto the fiber surfaces, facilitating the bacteria killing by contact mode., This work was funded by MAT2017-88123-P and MAT2016- 78437-R (FEDER−EU). C.E. also acknowledges IJCI-2015- 26432 contract from MINEICO. The authors also acknowledge Dr. Leoncio Garrido for the feedback in the electrospinning.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sandwich-Type Composites Based on Smart Ionomeric Polymer and Electrospun Microfibers

  • Sessini, Valentina
  • López Galisteo, A. J.
  • Leonés, Adrián
  • Ureña, A.
  • Peponi, Laura
Taking advance of the fiber-reinforced polymer process, commonly used in the fabrication of polymer composites, in this work we used electrospun microfibers to reinforce self-healing ionomeric polymers producing sandwich-type composites. In particular, three-layer stack with poly(lactic acid), PLA, electrospun fibers in between two layers of commercial smart polymers has been obtained based on poly(ethylene-co-methacrylic acid) (EMAA) copolymers, well-know with the tradename of Nucrel® and Surlyn®, both of them manufactured by Dupont™ Company. Surlyn® is the corresponding ionomer of Nucrel® in which the MAA groups are partially neutralized with sodium ions. In general, one of the main problems of thermoplastic composites, that provoke a lower impregnation of the fiber, is the high viscosity of the molten matrix. Therefore, in this work, we used electrospun microfibers in order to solve impregnation problem, thus considering that electrospinning process is an accessible, versatile and low-cost technique for fibers formation in the range of micron and nanometers. In order to create the sandwich-type structure, firstly, the optimization of the processing window has achieved in order to maintain the randomly oriented fiber structure on the final composites. In particular, the creation of sandwich-type structure with Surlyn® reinforced with woven non-woven electrospun fibers based on PLA with enhanced mechanical as well as hardness and wear resistance can be used for future active packaging solutions., Authors thank the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO) (MAT2017-88123-P, PCIN- 2017-036) cofinanced with FEDER and AEI funds. Authors acknowledge the financial support received from Comunidad de Madrid (Additive Manufacturing from material to application Aditimat-CM project, S2018/NMT-4411) and DupontTM Company for kindly providing the polymers. LP acknowledges the Ramon y Cajal (RYC-2014-15595) contract from MINEICO.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Multifunctional Biodegradable Nanocomposites based on PLA and Chitosan-coated Silver Nanoparticles

  • Sonseca, Águeda
  • Madani, S.
  • Echeverría, Coro
  • Rodríguez, G.
  • Leonés, Adrián
  • Peponi, Laura
  • Chavef, N.
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
  • Foiri, S.
  • López García, Daniel
Significant progress has been made in the last years in the study of biodegradable polymer materials with functionalities similar to those of non-biodegradable polymers, both of natural and of synthetic origin, extending their applicability to fields like food packaging, production of biomedical materials, agriculture, etc. In this sense, biodegradable nanocomposites offer new and exciting possibilities. We report on the development of multifunctional polymer nanocomposites that can undergo biodegradation in composting conditions. In particular, a research on the thermally-activated shape memory behaviour of films based on polylactic acid (PLA) and chitosan-coated silver nanoparticles (Ag@chitosan) was conducted with the purpose of obtaining a suitable material to be used in potential food packaging applications. In order to increase the stretchability of the films, 20 wt% of oligomeric lactic acid was added as plasticizer. Six different PLA-OLA-Ag@chitosan formulations with different proportions of Ag@chitosan from 0 to 5 wt.% were processed by extrusion. Subsequently, films were obtained by compression moulding at 180ºC and 50 Pas. Nanocomposite films were characterized for their thermal and mechanical properties in order to fix the experimental conditions for the shape memory experiments. The PLA capability to present shape memory behaviour was studied at 60ºC, and temperatures around 45°C. The recovery and fixity ratio of the different PLA-OLA-Ag@chitosan formulations studied here showed suitable shape memory behaviour with good values of strain fixity, as well as strain recovery ratios. Finally, bionanocomposite films showed appropriate disintegration in compost conditions in preliminary results (not shown here). Thus, showing their potential as biobased and biodegradable multifuctional active food packaging materials., This work is funded by MAT2017-88123-P. AS, CE and LP also acknowledge FJCI-2015-24405, IJCI-2015-26432 and RYC-2014-15595 contracts from MINEICO, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Electrospinning of biodegradable metal-reinforced biopolymer

  • Leonés, Adrián
  • Lieblich, Marcela
  • Benavente, Rosario
  • González-Carrasco, José Luis
  • Peponi, Laura
MINECO (AEI/FEDER,UE): POLYMAGIC: PCIN-2017-036; MAT2016-79869-C2-1-P, MAT2017-88123-P; RYC-2014-15595
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multifunctional PLA blends containing chitosan mediated silver nanoparticles: Thermal, mechanical, antibacterial, and degradation properties

  • Sonseca, Águeda
  • Madani, S.
  • Rodríguez, Gema
  • Hevilla, Víctor
  • Echeverría, Coro
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
  • Charef, N.
  • López García, Daniel
Poly(lactic acid) (PLA) is one of the most commonly employed synthetic biopolymers for facing plastic waste problems. Despite its numerous strengths, its inherent brittleness, low toughness, and thermal stability, as well as a relatively slow crystallization rate represent some limiting properties when packaging is its final intended application. In the present work, silver nanoparticles obtained from a facile and green synthesis method, mediated with chitosan as a reducing and stabilizing agent, have been introduced in the oligomeric lactic acid (OLA) plasticized PLA in order to obtain nanocomposites with enhanced properties to find potential application as antibacterial food packaging materials. In this way, the green character of the matrix and plasticizer was preserved by using an eco-friendly synthesis protocol of the nanofiller. The X-ray diffraction (XRD) and differential scanning calorimetry (DSC) results proved the modification of the crystalline structure as well as the crystallinity of the pristine matrix when chitosan mediated silver nanoparticles (AgCH-NPs) were present. The final effect over the thermal stability, mechanical properties, degradation under composting conditions, and antimicrobial behavior when AgCH-NPs were added to the neat plasticized PLA matrix was also investigated. The obtained results revealed interesting properties of the final nanocomposites to be applied as materials for the targeted application., This research was funded by Spanish Ministry of Science, Innovation and Universities (AEI-MICINN/FEDER); Projects MAT2016-78437-R and MAT2017-88123-P.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

Biodegradable and antimicrobial PLA-OLA blends containing chitosan-mediated silver nanoparticles with shape memory properties for potential medical applications

  • Sonseca, Águeda
  • Madani, Salim
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
  • Peponi, Laura
  • Leonés, Adrián
  • Rodríguez, Gema
  • Echeverría, Coro
  • López García, Daniel
To use shape memory materials based on poly (lactic acid) (PLA) for medical applications is essential to tune their transition temperature (Ttrans) near to the human body temperature. In this study, the combination of lactic acid oligomer (OLA), acting as a plasticizer, together with chitosan-mediated silver nanoparticles (AgCH-NPs) to create PLA matrices is studied to obtain functional shape memory polymers for potential medical applications. PLA/OLA nanocomposites containing different amounts of AgCH-NPs were obtained and profusely characterized relating their structure with their antimicrobial and shape memory performances. Nanocomposites exhibited shape memory responses at the temperature of interest (near physiological one), as well as excellent shape memory responses, shorter recovery times and higher recovery ratios (over 100%) when compared to neat materials. Moreover, antibacterial activity tests confirmed biocidal activity; therefore, these functional polymer nanocomposites with shape memory, degradability and biocidal activity show great potential for soft actuation applications in the medical field., This research was funded by Spanish Ministry of Science and Innovation (AEIMICINN/FEDER); Projects MAT2016-78437-R, MAT2017-88123-P and PCIN-2017-036. A. S. acknowledges her “APOSTD/2018/228” and “PAID-10-19” postdoctoral contracts from the Education, Research, Culture and Sport Council from the Government of Valencia and from the Polytechnic University of Valencia, respectively. C.E. acknowledges the IJCI-2015-26432 contract from MICINN. L.P. acknowledges the Ramon y Cajal (RYC-2014-15595) contract from MICINN., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organic and Inorganic PCL-Based Electrospun Fibers

  • Leonés, Adrián
  • Mújica-García, Alicia
  • Arrieta, Marina P.
  • Salaris, Valentina
  • López García, Daniel
  • Kenny, José María
  • Peponi, Laura
© 2020 by the authors., In this work, different nanocomposite electrospun fiber mats were obtained based on poly(e-caprolactone) (PCL) and reinforced with both organic and inorganic nanoparticles. In particular, on one side, cellulose nanocrystals (CNC) were synthesized and functionalized by “grafting from” reaction, using their superficial OH– group to graft PCL chains. On the other side, commercial chitosan, graphene as organic, while silver, hydroxyapatite, and fumed silica nanoparticles were used as inorganic reinforcements. All the nanoparticles were added at 1 wt% with respect to the PCL polymeric matrix in order to compare the different behavior of the woven no-woven nanocomposite electrospun fibers with a fixed amount of both organic and inorganic nanoparticles. From the thermal point of view, no difference was found between the effect of the addition of organic or inorganic nanoparticles, with no significant variation in the Tg (glass transition temperature), Tm (melting temperature), and the degree of crystallinity, leading in all cases to high crystallinity electrospun mats. From the mechanical point of view, the highest values of Young modulus were obtained when graphene, CNC, and silver nanoparticles were added to the PCL electrospun fibers. Moreover, all the nanoparticles used, both organic and inorganic, increased the flexibility of the electrospun mats, increasing their elongation at break., This work was funded by MAT2017-88123-P and PCIN-2017-036 (MINEICO FEDER EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biodegradable electrospun PLA-PHB fibers plasticized with oligomeric lactic acid

  • Arrieta, Marina P.
  • Perdiguero, M.
  • Fiori, Stefano
  • Kenny, José María
  • Peponi, Laura
In this paper flexible electrospun mats based on poly(lactic acid) (PLA) blended with 25 wt% of poly(hydroxibutyrate) (PHB) and further plasticized with three different concentration of oligomeric lactic acid (OLA) were developed. The morphological, structural, thermal and mechanical performance of electrospun mats was evaluated. OLA improves the crystallization rate of PLA presenting better interaction with PLA than with PHB. The incorporation of OLA to PLA-PHB blends produced a decrease on the viscosity of the polymeric solutions, leading to a reduction of the fibers diameters by increasing the amount of OLA plasticizer in the final blends. The highest amount of OLA of 20 wt% respect to PLA-PHB blend produced some bead defects in the fibers, which leads to a reduction of the mechanical performance of woven no-woven electrospun mats. Furthermore, all the electrospun mats were disintegrated in composting conditions showing their interest as compostable materials. The ternary system PLA-PHB-OLA15, showed the best results in term of structural and mechanical properties as well as appropriate disintegration in compost suggesting their potential applications as agricultural mulch films., Authors thank Spanish Ministry of Economy, Industry and Competitiveness (MINEICO) (MAT2017-88123-P, PCIN-2017-036) cofinanced with FEDER and AEI funds. M.P.A. acknowledges a “Juan de la Cierva-incorporación" (FJCI-2017-33536) contract as well as L.P. acknowledges the “Ramon y Cajal” (RYC-2014-15595) contract from the MINEICO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Potential Applications of Magnesium-Based Polymeric Nanocomposites Obtained by Electrospinning Technique

  • Leonés, Adrián
  • Lieblich, Marcela
  • Benavente, Rosario
  • González, José Luis
  • Peponi, Laura
In the last few decades, the development of new electrospun materials with different morphologies and advanced multifunctional properties are strongly consolidated. There are several reviews that describe the processing, use and characterization of electrospun nanocomposites, however, based on our knowledge, no review on electrospun nanocomposites reinforced with nanoparticles (NPs) based on magnesium, Mg-based NPs, are reported. Therefore, in the present review, we focus attention on the fabrication of these promising electrospun materials and their potential applications. Firstly, the electrospinning technique and its main processing window-parameters are described, as well as some post-processing methods used to obtain Mg-based materials. Then, the applications of Mg-based electrospun nanocomposites in different fields are pointed out, thus taking into account the current trend in developing inorganic-organic nanocomposites to gradually satisfy the challenges that the industry generates. Mg-based electrospun nanocomposites are becoming an attractive field of research for environmental remediation (waste-water cleaning and air filtration) as well as for novel technical textiles. However, the mayor application of Mg-based electrospun materials is in the biomedical field, as pointed out. Therefore, this review aims to clarify the tendency in using electrospinning technique and Mg-based nanoparticles to huge development at industrial level in the near future., The authors thank the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO) (MAT2017-88123-P, POLYMAGIC: (PCIN-2017-036) cofinanced with EU FEDER funds, and PID2019-104351GB-C21 financed by Spanish Ministry of Science and Innovation (MICINN)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional properties of photo-crosslinkable biodegradable polyurethane nanocomposites

  • Salgado, Cástor
  • Arrieta, Marina P.
  • Sessini, Valentina
  • Peponi, Laura
  • López García, Daniel
  • Fernández-García, Marta
Smart and functional properties of coumarin and PCL-based polyurethane (PU) nanocomposites reinforced with both pristine silica nanoparticles and silica nanoparticles modified with coumarin, have been studied. Coumarin is a photo-responsive derivative, which induces photo-crosslinking when it is incorporated in the PU moieties. Swelling measurements were performed to study the photo-crosslinking fraction and the results are in concordance with the degree of crosslinking (DC) calculated by UV measurements. Shape memory behavior was studied by thermo-mechanical cycles, by measuring the strain recovery and shape fixity ratios of the photo-crosslinked films. The modification of silica nanoparticles allows an improvement in the dispersion of the reinforcements into the PU matrix, which leads to an enhancement of the shape memory properties. Finally, the materials were disintegrated under composting conditions at laboratory scale level to confirm their biodisintegrable behavior., Authors thank Spanish Ministry of Economy, Industry and Competitiveness, MINEICO (MAT2016-MAT2016-78437-R, MAT2017-88123-P, PCIN-2017-036), the Agencia Estatal dInvestigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU). M.P.A. and L.P. acknowledge the Juan de la Cierva (FJCI-2014-20630) and Ramon y Cajal (RYC-2014-15595) contracts from the MINEICO, respectively. V.S. thanks the Wallonia Region, West-Vlaanderen Region, Agentschap Innoveren Ondernemen and European Community (FEDER funds) for the financial support in the frame of the INTERREG V FWVL e BIOHARV project (GoToS3 portofolio
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of photoresponsive coumarin-modified ethylene-co-vinyl alcohol copolymers with antifouling behavior

  • Salgado, Cástor
  • Arrieta, Marina P.
  • Chiloeches, Alberto
  • Peponi, Laura
  • López García, Daniel
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
In this work, the modification of ethylene-co-vinyl alcohol (EVOH) copolymer with a coumarin derivative, 7- (hydroxyethoxy)-4-methyl coumarin (HEOMC), has been performed through the incorporation of different reactive groups, p-nitrophenyl chloroformate, succinic anhydride and phthalic anhydride as different linkers between coumarin and EVOH with the aim to obtain photo-responsive materials with improved protein absorption resistance. After purification, the modification degree was calculated by nuclear magnetic resonance and ultraviolet- visible spectroscopy. The thermal properties revealed the crystallinity loss and higher maximum degradation temperatures when EVOH is modified with coumarin derivative. Copolymers were successfully photocrosslinked through the photo-responsive behavior of coumarin moieties. The micro-hardness test shown an increase of the mechanical performance due to the coumarin presence. The water contact angle measurements revealed that while coumarin-modified EVOH copolymers present a higher hydrophilic behavior than EVOH, the photo-dimerization process mainly leads to slightly deviations on the surface wettability of neat EVOH. Finally, the absorption of bovine serum albumin onto the surface of the coumarin-modified materials revealed enhanced antifouling properties, particularly after the photo-crosslinked process. Therefore, the introduction of coumarin through different chain extenders leads to functional materials with tunable photo-responsive performance and protein absorption resistance., Authors thank Spanish Ministry of Science and Innovation (Projects MAT2016-78437-R MAT2017-88123-P), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU). M.P.A. and L.P. acknowledge the Juan de la Cierva (FJCI- 2014-20630) and Ramon y Cajal (RYC-2014-15595) contracts from the MINECO, respectively. A.C. also acknowledges his FPU fellowship FPU18/01776., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrospinning of PCL-based blends: Processing optimization for their scalable production

  • Arrieta, Marina P.
  • Leonés, Adrián
  • Yusen, M.
  • Kenny, José María
  • Peponi, Laura
In this work poly("-caprolactone) (PCL) based electrospun mats were prepared by blending PCL with microcrystalline cellulose (MCC) and poly(3-hydroxybutyrate) (PHB). The electrospinning processing parameters were firstly optimized with the aim to obtain scalable PCL-based electrospun mats to be used in the industrial sector. Neat PCL as well as PCL-MCC and PCL-PHB based mats in different proportions (99:1; 95:5; 90:10) were prepared. A complete morphological, thermal and mechanical characterization of the developed materials was carried out. Scanning electron microscopy (SEM) observations showed that the addition of PHB to the PCL matrix considerably reduced the formation of beads. Both the addition of MCC and PHB reduced the thermal stability of PCL, but obtained materials with enough thermal stability for the intended use. The electrospun PCL fibers show greatly reduced flexibility with respect to the PCL bulk material, however when PCL is blended with PHB their stretchability is increased, changing their elongation at break from 35% to 70% when 10 wt% of PHB is blended with PCL. However, the mechanical response of the different blends increases with respect to the neat electrospun PCL, offering the possibility to modulate their properties according to the required industrial applications., This work was funded by RYC-2014-15595, FJCI-2017-33536, MAT2017-88123-P and PCIN-2017-036 (FEDER EU).The authors thank the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO) (MAT2017-88123-P, POLYMAGIC: (PCIN-2017-036) cofinanced with EU FEDER funds. M.P.A. and L.P. acknowledge the “Juan de la Cierva” (FJCI-2017-33536) and “Ramon y Cajal” (RYC-2014-15595) contracts from the MINEICO, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In Vitro Degradation of Plasticized PLA Electrospun Fiber Mats: Morphological, Thermal and Crystalline Evolution

  • Leonés, Adrián
  • Peponi, Laura
  • Lieblich, Marcela
  • Benavente, Rosario
  • Fiori, Stefano
In the present work, fiber mats of poly(lactic acid), PLA, plasticized by different amounts of oligomer lactic acid, OLA, were obtained by electrospinning in order to investigate their long term hydrolytic degradation. This was performed in a simulated body fluid for up to 352 days, until the complete degradation of the samples is reached. The evolution of the plasticized electrospun mats was followed in terms of morphological, thermal, chemical and crystalline changes. Mass variation and water uptake of PLA-based electrospun mats, together with pH stability of the immersion media, were also studied during the <i>in vitro</i> test. The results showed that the addition of OLA increases the hydrolytic degradation rate of PLA electrospun fiber mats. Moreover, by adding different amounts of OLA, the time of degradation of the electrospun fiber mats can be modulated over the course of a year. Effectively, by increasing the amount of OLA, the diameter of the electrospun fibers decreases more rapidly during degradation. On the other hand, the degree of crystallinity and the dimension of the α crystals of the electrospun fiber mats are highly affected not only by the presence but also by the amount of OLA during the whole process., PCIN-2017-036: MAT2017-88123-P; PID2019-104351GB-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of Highly Crystalline Polylactic Acid with β-Crystalline Phase from the Induced Alignment of Electrospun Fibers

  • Echeverría, Coro
  • Limón, Irene
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
  • López García, Daniel
Polylactic acid (PLA) is one of the known synthetic polymers with potential piezoelectric activity but this property is directly related to both the crystalline structure and crystalline degree. Depending on the process conditions, PLA can crystallize in three different forms: α-, β-, and γ- form, with β-crystalline phase being the piezoelectric one. To obtain this crystalline structure, transformation of α to β is required. To do so, the strategies followed so far consisted in annealing or/and stretching of previously obtained PLA in the form of films or fibers, that is, additional post-processing steps. In this work, we are able to obtain PLA fibers with high macromolecular alignment, as demonstrated by SEM, and in the β polymorph, as detected by X-ray diffraction (XRD) without the requirement of post-processing. For that, PLA fibers were prepared by using an electrospinning coupled to a drum collector. This set up and the optimization of the parameters (voltage flow-rate, and drum collector speed) induced molecular stretching giving rise to uniaxially oriented and highly aligned fibers., This work was funded by the MICINN (MAT2017-88123-P, PID2019-104600RB-I00), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of highly crystalline polylactic acid with β-crystalline phase from the induced alignment of electrospun fibers

  • Echeverría, Coro
  • Limón, Irene
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
  • López García, Daniel
Polylactic acid (PLA) is one of the known synthetic polymers with potential piezoelectric activity but this property is directly related to both the crystalline structure and crystalline degree. Depending on the process conditions, PLA can crystallize in three different forms: α-, β-, and γ- form, with β-crystalline phase being the piezoelectric one. To obtain this crystalline structure, transformation of α to β is required. To do so, the strategies followed so far consisted in annealing or/and stretching of previously obtained PLA in the form of films or fibers, that is, additional postprocessing steps. In this work, we are able to obtain PLA fibers with high macromolecular alignment, as demonstrated by SEM, and in the β polymorph, as detected by X-ray diffraction (XRD) without the requirement of post-processing. For that, PLA fibers were prepared by using an electrospinning coupled to a drum collector. This set up and the optimization of the parameters (voltage flow-rate, and drum collector speed) induced molecular stretching giving rise to uniaxially oriented and highly aligned fibers., This work was funded by the MICINN (MAT2017-88123-P, PID2019-104600RB-I00), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study of the effect of the addition of plasticizers on the physical properties of biodegradable films based on kefiran for potential application as food packaging

  • Montoille, L.
  • Morales Vicencio, C.
  • Fontalba, D.
  • Ortiz, J. A.
  • Moreno-Serna, V.
  • Peponi, Laura
  • Matiacevich, S.
  • Zapata, P. A.
Spectroscopies analysis indicated that kefiran contains branched hexasaccharide repeating units. Neat kefiran films, 2 and 5% w/w of glycerol, D-glucitol, D-galactitol, D-mannitol, and D-limonene were incorporated as plasticizers. Neat and plasticized kefiran films were characterized by physical, thermal, mechanical, optical, and water solubilization properties. Neat kefiran had a glass transition temperature (T) of −20 ± 2 °C and, with the addition of plasticizers between −15 to −17 ± 2 °C. The values were close to the neat kefiran, and the results could be attributed to a lower amount of plasticizer used. The solubility of the glycerol plasticized films increases by 33% and decreased with the concentration of other plasticizers in comparison with the neat kefiran. D-glucitol and D-galactitol decreased the microhardness and Young's Modulus of films around 30% and 74% respectively, obtaining more flexible kefiran films. Kefiran based films could find applications as potential materials in the food-packaging industry., P. Zapata acknowledges the support of FONDECYT Project 1170226. V. Moreno-Serna acknowledges the financial support under DICYT project 022041ZR_POSTDOCT. J.A. Ortiz would like to thank FONDE- CYT Postdoctorado 3200296 Universidad de Chile for their financial support. L. Peponi acknowledges the funding for the project by the Spanish Ministry of Economy, Industry and Competitiveness MAT2017- 88123-P, and S. Matiacevich would like to thank DICYT project 08197M from the University of Santiago de Chile for their financial support. Thanks to the ANID Fondequip USACH project and the nuclear magnetic resonance laboratory for the study of samples with the Bruker Avance DRX 400 NMR spectrometer., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PLA Electrospun Fibers Reinforced with Organic and Inorganic Nanoparticles: A Comparative Study

  • Leonés, Adrián
  • Salaris, Valentina
  • Mújica-García, Alicia
  • Arrieta, Marina P.
  • López García, Daniel
  • Kenny, José María
  • Peponi, Laura
In this work, different poly (lactic acid) (PLA)-based nanocomposite electrospun fibers, reinforced with both organic and inorganic nanoparticles, were obtained. As organic fibers, cellulose nanocrystals, CNC, both neat and functionalized by “grafting from” reaction, chitosan and graphene were used; meanwhile, hydroxyapatite and silver nanoparticles were used as inorganic fibers. All of the nanoparticles were added at 1 wt% with respect to the PLA matrix in order to be able to compare their effect. The main aim of this work was to study the morphological, thermal and mechanical properties of the different systems, looking for differences between the effects of the addition of organic or inorganic nanoparticles. No differences were found in either the glass transition temperature or the melting temperature between the different electrospun systems. However, systems reinforced with both neat and functionalized CNC exhibited an enhanced degree of crystallinity of the electrospun fibers, by up to 12.3%. From a mechanical point of view, both organic and inorganic nanoparticles exhibited a decreased elastic modulus and tensile strength in comparison to neat electrospun PLA fibers, improving their elongation at break. Furthermore, all of the organic and inorganic reinforced systems disintegrated under composting conditions after 35 days., The authors thank the Spanish Ministry of Economy, Industry and Competitive- ness (MINEICO) (MAT2017-88123-P, POLYMAGIC: (PCIN-2017-036) cofinanced with EU FEDER funds
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Compositional Influence on the Morphology and Thermal Properties of Woven Non-Woven Mats of PLA/OLA/MgO Electrospun Fibers

  • Leonés, Adrián
  • Peponi, Laura
  • García-Martínez, Jesús María
  • Collar, Emilia P.
In the present work, a statistical study of the morphology and thermal behavior of poly(lactic acid) (PLA)/oligomer(lactic acid) (OLA)/magnesium oxide nanoparticles (MgO), electrospun fibers (efibers) has been carried out. The addition of both, OLA and MgO, is expected to modify the final properties of the electrospun PLA-based nanocomposites for their potential use in biomedical applications. Looking for the compositional optimization of these materials, a Box–Wilson design of experiment was used, taking as dependent variables the average fiber diameter as the representative of the fiber morphologies, as well as the glass transition temperature (Tg) and the degree of crystallinity (Xc) as their thermal response. The results show <r> values of 73.76% (diameter), 88.59% (Tg) and 75.61% (Xc) for each polynomial fit, indicating a good correlation between both OLA and MgO, along with the morphological as well as the thermal behavior of the PLA-based efibers in the experimental space scanned., Part of this work was financed with the support of the Spanish Ministry of Science and Innovation through MAT2017-88123-P
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional Biodegradable Nanocomposites

  • Sonseca, Águeda
  • Echeverría, Coro
  • López García, Daniel
Over 367 million tons of plastics are produced annually worldwide, and the growth of plastic pollution has become a global concern [...], This research was funded by Spanish Ministry of Science and Innovation (AEIMICINN/FEDER); Projects MAT2016-78437-R, MAT2017-88123-P and PCIN-2017-036 and by the Valencian Autonomous Government, Generalitat Valenciana, GVA (GV/2021/182). A. S. acknowledges her “APOSTD/2018/228” and “PAID-10-19” postdoctoral contracts from the Education, Research, Culture and Sport Council from the Government of Valencia and from the Polytechnic University of Valencia, respectively. C.E. acknowledges IJCI-2015-26432 contract from MICINN., Peer reviewed
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Sandwich-type composites based on self-healing ionomeric polymer and electrospun microfibers

  • Sessini, Valentina|||0000-0003-1205-4586
  • López Galisteo, Antonio Julio
  • Leonés, Adrián
  • Ureña, Alejandro
  • Peponi, Laura
Taking advance of the fiber-reinforced polymer process, commonly used in the fabrication of polymer composites, in this work we used electrospun microfibers to reinforce self-healing ionomeric polymers producing sandwich-type composites. In particular, three-layer stack with poly(lactic acid), PLA, electrospun fibers in between two layers of commercial smart polymers has been obtained based on poly(ethylene-co-methacrylic acid) (EMAA) copolymers, well-know with the tradename of Nucrel® and Surlyn®, both of them manufactured by Dupont&#8482; Company. Surlyn® is the corresponding ionomer of Nucrel® in which the MAA groups are partially neutralized with sodium ions. In general, one of the main problems of thermoplastic composites, that provoke a lower impregnation of the fiber, is the high viscosity of the molten matrix. Therefore, in this work, we used electrospun microfibers in order to solve impregnation problem, thus considering that electrospinning process is an accessible, versatile and low-cost technique for fibers formation in the range of micron and nanometers. In order to create the sandwich-type structure, firstly, the optimization of the processing window has achieved in order to maintain the randomly oriented fiber structure on the final composites. In particular, the creation of sandwich-type structure with Surlyn® reinforced with woven non-woven electrospun fibers based on PLA with enhanced mechanical as well as hardness and wear resistance can be used for future active packaging solutions., Ministerio de Economía, Industria y Competitividad, Comunidad de Madrid