Pasar al contenido principal

MATERIALES COMPUESTOS BIODEGRADABLES DE PLA REFORZADO CON MICRO Y NANO PARTICULAS DE MG: OPTIMIZACION DEL PROCESADO Y DISEÑO, Y ESCALADO INDUSTRIAL DE IMPLANTES TEMPORALES

PCIN-2017-036

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos Programación Conjunta Internacional
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Shape memory effect on electrospun PLA-based fibers tailoring their thermal response

  • Leones, Adrián
  • Lopez, Daniel
  • Fiori, Stefano
  • Peponi, Laura
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
[EN] A research on the thermally-activated shape memory behavior of electrospun nanofibers based on polylactic acid (PLA) plasticized with its oligomer (OLA) was conducted with the purpose of obtaining a suitable material to be used in potential biomedical applications. Three different PLA-OLA formulations with 70:30, 80:20 and 90:10 ratios were processed by electrospinning and studied in order to decrease the PLA glass transition temperature to a temperature closer to the human body. For each electrospun formulation mat, the average diameter of electrospun fibers was found to be 757 +/- 193 nm for neat PIA and 768 +/- 207 nm, 620 +/- 121 nm and 476 +/- 80 nm for PLA-OLA 90:10, 80:20 and 70:30 ratios, respectively and correlate it with their mechanical response. First of all, the PLA capability to present shape memory behavior even in non-woven electrospun fibers form has been studied at 60 degrees C. Thus, two values of switching temperatures (45 degrees C and 40 degrees C) were selected in order to evaluate their shape memory response, being temperatures close to the human body temperature. The recovery and fixity ratio of PLA-OLA formulations studied here showed suitable shape memory behavior of the electrospun systems with excellent values of strain fixity as well as strain recovery ratios indicating these materials appropriate for potential biomedical application., Authors thank the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO) (MAT2017-88123-P, POLYMAGIC: (PCIN-2017-036) cofinanced with FEDER funds. A.S. and L.P. acknowledge the "Juan de la Cierva" (FJCI-2015-24405) and "Ramon y Cajal" (RYC-2014-15595) contracts from MINEICO, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradable and Antimicrobial PLA-OLA Blends Containing Chitosan-Mediated Silver Nanoparticles with Shape Memory Properties for Potential Medical Applications

  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Madani, Salim
  • Muñoz-Bonilla, Alexandra
  • Fernández-Garcia, Marta
  • Peponi, Laura
  • Leones, Adrián
  • Rodríguez, Gema
  • Echeverría, Coro
  • López, Daniel
[EN] To use shape memory materials based on poly (lactic acid) (PLA) for medical applications is essential to tune their transition temperature (T-trans) near to the human body temperature. In this study, the combination of lactic acid oligomer (OLA), acting as a plasticizer, together with chitosan-mediated silver nanoparticles (AgCH-NPs) to create PLA matrices is studied to obtain functional shape memory polymers for potential medical applications. PLA/OLA nanocomposites containing different amounts of AgCH-NPs were obtained and profusely characterized relating their structure with their antimicrobial and shape memory performances. Nanocomposites exhibited shape memory responses at the temperature of interest (near physiological one), as well as excellent shape memory responses, shorter recovery times and higher recovery ratios (over 100%) when compared to neat materials. Moreover, antibacterial activity tests confirmed biocidal activity; therefore, these functional polymer nanocomposites with shape memory, degradability and biocidal activity show great potential for soft actuation applications in the medical field., This research was funded by Spanish Ministry of Science and Innovation (AEIMICINN/FEDER); Projects MAT2016-78437-R, MAT2017-88123-P and PCIN-2017-036. A. S. acknowledges her ¿APOSTD/2018/228¿ and ¿PAID-10-19¿ postdoctoral contracts from the Education, Research, Culture and Sport Council from the Government of Valencia and from the Polytechnic University of Valencia, respectively. C.E. acknowledges the IJCI-2015-26432 contract from MICINN. L.P. acknowledges the Ramon y Cajal (RYC-2014-15595) contract from MICINN.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In vitro degradation of biodegradable polylactic acid/Mg composites: Influence of nature and crystalline degree of the polymeric matrix

  • Cifuentes, Sandra C.
  • Lieblich, Marcela
  • Saldaña, Laura
  • González-Carrasco, José Luis
  • Benavente, Rosario
A deeper knowledge on the degradation pattern of a biodegradable material is required before considering it for a specific application as a bioabsorbable implant. In the last few years, composites formed by polylactic-acid reinforced with Mg-based particles have been proposed for biodegradable implants. The aim of the present work is to study the effect of the type and crystalline degree of the polymeric matrix on in vitro degradation kinetics of PLA/Mg composites. The effect of the nature of the matrix has been studied by comparing a composite with a poly-L-lactic (PLLA) matrix with another with a poly-L,D-lactic (PLDA) matrix. The influence of the crystalline degree has been studied by comparing a near amorphous with a high crystalline composite. The degradation behaviour has been determined through a joint analysis of the microstructure, the changes in mass and water intake, the pH evolution in buffered and non-buffered media, and the amount of H released up to 28 days of immersion. The viability of human mesenchymal stem cells (MSCs) on the composites was also evaluated. Results show that a PLDA matrix is more effective lowering the degradation rate of Mg particles than PLLA. The crystalline degree plays a major role in PLA/Mg composites degradation. The composite with the near amorphous matrix exhibited the lowest degradation rate and the highest cell viability. Whereas, cell viability decreases markedly on the high-crystalline composites, which is likely related to the accelerated release of degradation products. These data highlight the importance of matrix crystallinity on the degradation kinetics and cytocompatibility of PLA/Mg composites., The authors thank funding from MAT2015-63974-C4-1-R , MAT2016-79869-C2-1-P, PCIN-2017-036, S2013/MIT-2862 and PI15/00752 ( ISCIII -MINECO-AES) projects. LS is supported by a Miguel Servet contract from ISCIII-MINECO-AES-FEDER-FSE. SCC is supported by a Juan de la Cierva contract FJCI-2016-29004 ., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of biocompatible and fully bioabsorbable PLA/Mg films for tissue regeneration applications

  • Ferrández-Montero, Ana
  • Lieblich, Marcela
  • González-Carrasco, José Luis
  • Benavente, Rosario
  • Lorenzo, V.
  • Detsch, R.
  • Boccaccini, A. R.
  • Ferrari, Begoña
During recent years, Mg reinforced polylactic acid (PLA) composites have emerged as potential biocompatible and bioabsorbable materials for biomedical applications. It has been shown that Mg particles added to a matrix based on a biodegradable polymer can address the lack of bioactivity and the low mechanical properties of the polymers and, furthermore, it can counteract the detrimental effects associated to the high degradation rate of Mg, as alkalinization and elevated H release. Additionally, the polymer can protect the Mg particles, by tailoring their degradation rate. Former processing of these composites performed by extrusion, compression and injection molding employed Mg contents up to 10 wt%. Higher amounts of Mg resulted in heterogeneous materials and thermally degraded matrices, with the corresponding higher degradation rate. In the present work, Mg reinforced PLA films with Mg content as high as 50 wt% were obtained without compromising the thermal stability of the polymer. Firstly, a successful dispersion of Mg microparticles was achieved by a breakthrough in processing introducing a colloidal step where organic additives were added to modify the Mg particle surface and promote a chemically stable suspension. The resulting colloidal suspension was then used as feedstock to obtain composite films by tape casting. The films show advantageous in vitro behaviour in terms of degradation, hydrogen release and oxygen permeability. In addition, the viability with fibroblast cells (MEF) opens a window of opportunity for these composite films as bioabsorbable material for tissue engineering and wound dressing applications. Statement of Significance: Magnesium materials have extraordinary biodegradable properties and bioactive behavior due to release of Mg ions, which offer a promising opportunity for their applicability as biomaterials for tissue regeneration. However, Mg is one of the most reactive metals with a high degradation rate. In contact with water produces H, associated with a risk of failure of the implant. One alternative to minimize this drawback is the use of Mg particles surrounded by a biodegradable biocompatible polymer such as polylactic acid (PLA) to obtain PLA/Mg composites. In this work we processed Mg reinforced PLA in the shape of films that would be suitable for tissue regeneration. In vitro behavior of PLA/Mg films demonstrated that Mg ions increase the fibroblast cells growth., Financial support of MINECO: MAT2015-63974-C4-1, MAT2016-79869-C2-1-P, MAT2016-79869-C2-1-P (AEI/FEDER, UE), Comunidad de Madrid: ADITIMAT: S2018/NMT-4411, and M-ERA.NET PCIN-2017-036 (MINECO, Spain)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Sandwich-Type Composites Based on Smart Ionomeric Polymer and Electrospun Microfibers

  • Sessini, Valentina
  • López Galisteo, A. J.
  • Leonés, Adrián
  • Ureña, A.
  • Peponi, Laura
Taking advance of the fiber-reinforced polymer process, commonly used in the fabrication of polymer composites, in this work we used electrospun microfibers to reinforce self-healing ionomeric polymers producing sandwich-type composites. In particular, three-layer stack with poly(lactic acid), PLA, electrospun fibers in between two layers of commercial smart polymers has been obtained based on poly(ethylene-co-methacrylic acid) (EMAA) copolymers, well-know with the tradename of Nucrel® and Surlyn®, both of them manufactured by Dupont™ Company. Surlyn® is the corresponding ionomer of Nucrel® in which the MAA groups are partially neutralized with sodium ions. In general, one of the main problems of thermoplastic composites, that provoke a lower impregnation of the fiber, is the high viscosity of the molten matrix. Therefore, in this work, we used electrospun microfibers in order to solve impregnation problem, thus considering that electrospinning process is an accessible, versatile and low-cost technique for fibers formation in the range of micron and nanometers. In order to create the sandwich-type structure, firstly, the optimization of the processing window has achieved in order to maintain the randomly oriented fiber structure on the final composites. In particular, the creation of sandwich-type structure with Surlyn® reinforced with woven non-woven electrospun fibers based on PLA with enhanced mechanical as well as hardness and wear resistance can be used for future active packaging solutions., Authors thank the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO) (MAT2017-88123-P, PCIN- 2017-036) cofinanced with FEDER and AEI funds. Authors acknowledge the financial support received from Comunidad de Madrid (Additive Manufacturing from material to application Aditimat-CM project, S2018/NMT-4411) and DupontTM Company for kindly providing the polymers. LP acknowledges the Ramon y Cajal (RYC-2014-15595) contract from MINEICO.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

Biodegradable and antimicrobial PLA-OLA blends containing chitosan-mediated silver nanoparticles with shape memory properties for potential medical applications

  • Sonseca, Águeda
  • Madani, Salim
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
  • Peponi, Laura
  • Leonés, Adrián
  • Rodríguez, Gema
  • Echeverría, Coro
  • López García, Daniel
To use shape memory materials based on poly (lactic acid) (PLA) for medical applications is essential to tune their transition temperature (Ttrans) near to the human body temperature. In this study, the combination of lactic acid oligomer (OLA), acting as a plasticizer, together with chitosan-mediated silver nanoparticles (AgCH-NPs) to create PLA matrices is studied to obtain functional shape memory polymers for potential medical applications. PLA/OLA nanocomposites containing different amounts of AgCH-NPs were obtained and profusely characterized relating their structure with their antimicrobial and shape memory performances. Nanocomposites exhibited shape memory responses at the temperature of interest (near physiological one), as well as excellent shape memory responses, shorter recovery times and higher recovery ratios (over 100%) when compared to neat materials. Moreover, antibacterial activity tests confirmed biocidal activity; therefore, these functional polymer nanocomposites with shape memory, degradability and biocidal activity show great potential for soft actuation applications in the medical field., This research was funded by Spanish Ministry of Science and Innovation (AEIMICINN/FEDER); Projects MAT2016-78437-R, MAT2017-88123-P and PCIN-2017-036. A. S. acknowledges her “APOSTD/2018/228” and “PAID-10-19” postdoctoral contracts from the Education, Research, Culture and Sport Council from the Government of Valencia and from the Polytechnic University of Valencia, respectively. C.E. acknowledges the IJCI-2015-26432 contract from MICINN. L.P. acknowledges the Ramon y Cajal (RYC-2014-15595) contract from MICINN., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Organic and Inorganic PCL-Based Electrospun Fibers

  • Leonés, Adrián
  • Mújica-García, Alicia
  • Arrieta, Marina P.
  • Salaris, Valentina
  • López García, Daniel
  • Kenny, José María
  • Peponi, Laura
© 2020 by the authors., In this work, different nanocomposite electrospun fiber mats were obtained based on poly(e-caprolactone) (PCL) and reinforced with both organic and inorganic nanoparticles. In particular, on one side, cellulose nanocrystals (CNC) were synthesized and functionalized by “grafting from” reaction, using their superficial OH– group to graft PCL chains. On the other side, commercial chitosan, graphene as organic, while silver, hydroxyapatite, and fumed silica nanoparticles were used as inorganic reinforcements. All the nanoparticles were added at 1 wt% with respect to the PCL polymeric matrix in order to compare the different behavior of the woven no-woven nanocomposite electrospun fibers with a fixed amount of both organic and inorganic nanoparticles. From the thermal point of view, no difference was found between the effect of the addition of organic or inorganic nanoparticles, with no significant variation in the Tg (glass transition temperature), Tm (melting temperature), and the degree of crystallinity, leading in all cases to high crystallinity electrospun mats. From the mechanical point of view, the highest values of Young modulus were obtained when graphene, CNC, and silver nanoparticles were added to the PCL electrospun fibers. Moreover, all the nanoparticles used, both organic and inorganic, increased the flexibility of the electrospun mats, increasing their elongation at break., This work was funded by MAT2017-88123-P and PCIN-2017-036 (MINEICO FEDER EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biodegradable electrospun PLA-PHB fibers plasticized with oligomeric lactic acid

  • Arrieta, Marina P.
  • Perdiguero, M.
  • Fiori, Stefano
  • Kenny, José María
  • Peponi, Laura
In this paper flexible electrospun mats based on poly(lactic acid) (PLA) blended with 25 wt% of poly(hydroxibutyrate) (PHB) and further plasticized with three different concentration of oligomeric lactic acid (OLA) were developed. The morphological, structural, thermal and mechanical performance of electrospun mats was evaluated. OLA improves the crystallization rate of PLA presenting better interaction with PLA than with PHB. The incorporation of OLA to PLA-PHB blends produced a decrease on the viscosity of the polymeric solutions, leading to a reduction of the fibers diameters by increasing the amount of OLA plasticizer in the final blends. The highest amount of OLA of 20 wt% respect to PLA-PHB blend produced some bead defects in the fibers, which leads to a reduction of the mechanical performance of woven no-woven electrospun mats. Furthermore, all the electrospun mats were disintegrated in composting conditions showing their interest as compostable materials. The ternary system PLA-PHB-OLA15, showed the best results in term of structural and mechanical properties as well as appropriate disintegration in compost suggesting their potential applications as agricultural mulch films., Authors thank Spanish Ministry of Economy, Industry and Competitiveness (MINEICO) (MAT2017-88123-P, PCIN-2017-036) cofinanced with FEDER and AEI funds. M.P.A. acknowledges a “Juan de la Cierva-incorporación" (FJCI-2017-33536) contract as well as L.P. acknowledges the “Ramon y Cajal” (RYC-2014-15595) contract from the MINEICO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Potential Applications of Magnesium-Based Polymeric Nanocomposites Obtained by Electrospinning Technique

  • Leonés, Adrián
  • Lieblich, Marcela
  • Benavente, Rosario
  • González, José Luis
  • Peponi, Laura
In the last few decades, the development of new electrospun materials with different morphologies and advanced multifunctional properties are strongly consolidated. There are several reviews that describe the processing, use and characterization of electrospun nanocomposites, however, based on our knowledge, no review on electrospun nanocomposites reinforced with nanoparticles (NPs) based on magnesium, Mg-based NPs, are reported. Therefore, in the present review, we focus attention on the fabrication of these promising electrospun materials and their potential applications. Firstly, the electrospinning technique and its main processing window-parameters are described, as well as some post-processing methods used to obtain Mg-based materials. Then, the applications of Mg-based electrospun nanocomposites in different fields are pointed out, thus taking into account the current trend in developing inorganic-organic nanocomposites to gradually satisfy the challenges that the industry generates. Mg-based electrospun nanocomposites are becoming an attractive field of research for environmental remediation (waste-water cleaning and air filtration) as well as for novel technical textiles. However, the mayor application of Mg-based electrospun materials is in the biomedical field, as pointed out. Therefore, this review aims to clarify the tendency in using electrospinning technique and Mg-based nanoparticles to huge development at industrial level in the near future., The authors thank the Spanish Ministry of Economy, Industry, and Competitiveness (MINECO) (MAT2017-88123-P, POLYMAGIC: (PCIN-2017-036) cofinanced with EU FEDER funds, and PID2019-104351GB-C21 financed by Spanish Ministry of Science and Innovation (MICINN)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrospinning of PCL-based blends: Processing optimization for their scalable production

  • Arrieta, Marina P.
  • Leonés, Adrián
  • Yusen, M.
  • Kenny, José María
  • Peponi, Laura
In this work poly("-caprolactone) (PCL) based electrospun mats were prepared by blending PCL with microcrystalline cellulose (MCC) and poly(3-hydroxybutyrate) (PHB). The electrospinning processing parameters were firstly optimized with the aim to obtain scalable PCL-based electrospun mats to be used in the industrial sector. Neat PCL as well as PCL-MCC and PCL-PHB based mats in different proportions (99:1; 95:5; 90:10) were prepared. A complete morphological, thermal and mechanical characterization of the developed materials was carried out. Scanning electron microscopy (SEM) observations showed that the addition of PHB to the PCL matrix considerably reduced the formation of beads. Both the addition of MCC and PHB reduced the thermal stability of PCL, but obtained materials with enough thermal stability for the intended use. The electrospun PCL fibers show greatly reduced flexibility with respect to the PCL bulk material, however when PCL is blended with PHB their stretchability is increased, changing their elongation at break from 35% to 70% when 10 wt% of PHB is blended with PCL. However, the mechanical response of the different blends increases with respect to the neat electrospun PCL, offering the possibility to modulate their properties according to the required industrial applications., This work was funded by RYC-2014-15595, FJCI-2017-33536, MAT2017-88123-P and PCIN-2017-036 (FEDER EU).The authors thank the Spanish Ministry of Economy, Industry and Competitiveness (MINEICO) (MAT2017-88123-P, POLYMAGIC: (PCIN-2017-036) cofinanced with EU FEDER funds. M.P.A. and L.P. acknowledge the “Juan de la Cierva” (FJCI-2017-33536) and “Ramon y Cajal” (RYC-2014-15595) contracts from the MINEICO, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

In Vitro Degradation of Plasticized PLA Electrospun Fiber Mats: Morphological, Thermal and Crystalline Evolution

  • Leonés, Adrián
  • Peponi, Laura
  • Lieblich, Marcela
  • Benavente, Rosario
  • Fiori, Stefano
In the present work, fiber mats of poly(lactic acid), PLA, plasticized by different amounts of oligomer lactic acid, OLA, were obtained by electrospinning in order to investigate their long term hydrolytic degradation. This was performed in a simulated body fluid for up to 352 days, until the complete degradation of the samples is reached. The evolution of the plasticized electrospun mats was followed in terms of morphological, thermal, chemical and crystalline changes. Mass variation and water uptake of PLA-based electrospun mats, together with pH stability of the immersion media, were also studied during the <i>in vitro</i> test. The results showed that the addition of OLA increases the hydrolytic degradation rate of PLA electrospun fiber mats. Moreover, by adding different amounts of OLA, the time of degradation of the electrospun fiber mats can be modulated over the course of a year. Effectively, by increasing the amount of OLA, the diameter of the electrospun fibers decreases more rapidly during degradation. On the other hand, the degree of crystallinity and the dimension of the α crystals of the electrospun fiber mats are highly affected not only by the presence but also by the amount of OLA during the whole process., PCIN-2017-036: MAT2017-88123-P; PID2019-104351GB-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional Biodegradable Nanocomposites

  • Sonseca, Águeda
  • Echeverría, Coro
  • López García, Daniel
Over 367 million tons of plastics are produced annually worldwide, and the growth of plastic pollution has become a global concern [...], This research was funded by Spanish Ministry of Science and Innovation (AEIMICINN/FEDER); Projects MAT2016-78437-R, MAT2017-88123-P and PCIN-2017-036 and by the Valencian Autonomous Government, Generalitat Valenciana, GVA (GV/2021/182). A. S. acknowledges her “APOSTD/2018/228” and “PAID-10-19” postdoctoral contracts from the Education, Research, Culture and Sport Council from the Government of Valencia and from the Polytechnic University of Valencia, respectively. C.E. acknowledges IJCI-2015-26432 contract from MICINN., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Metastable FeMg particles for controlling degradation rate, mechanical properties, and biocompatibility of Poly(l-lactic) acid (PLLA) for orthopedic applications

  • Estrada, Rafael Guillermo
  • Multigner, M.
  • Fagali, Natalia S.
  • Muñoz, Marta
  • Cifuentes, Sandra C.
  • Torres, Belén
  • Lieblich, Marcela
Poly(l-lactic) acid (PLLA) is commonly used in bioabsorbable medical implants, but it suffers from slow degradation rate and rapid decline in mechanical properties for orthopedic applications. To address this drawback, recent research has explored the use of Mg as a filler for PLLA, resulting in composites with improved degradation rate and cytocompatibility compared to neat PLLA. In this study, FeMg powder particles were proposed as fillers for PLLA to investigate the potential of PLLA/FeMg composites for bioabsorbable implants. Cylinder specimens of PLLA, PLLA/Fe, PLLA/Mg and PLLA/FeMg were prepared using solvent casting followed by thermo-molding. The microstructure, thermal behavior, in vitro degradation behavior in simulated body fluid, mechanical properties and cytocompatibility of these composites were examined. The results indicate that the presence of FeMg particles prevents the deterioration of the composite mechanical properties, at least up to 14 days. Once a certain amount of degradation of the composite is reached, the degradation is faster than that of PLLA. Direct cytotoxicity assays revealed that pre-osteoblast MC3T3-E1 cells successfully adhered to and proliferated on the PLLA/FeMg surface. The inclusion of a low percentage of Mg into the Fe lattice not only accelerated the degradation rate of Fe but also improved its cytocompatibility. The enhanced degradation rate, mechanical properties, and osteoconductive properties of this composite make it a promising option for temporary orthopedic biomedical devices., Financial support of Ministry of Science and Innovation of Spain (MICINN) PID2019-104351GB-C21, PCIN-2017-036 (M-ERANet2016:4128, EU-FEDER), PID2021-124341OB-C21 and PID2021-123891OB-I00, are greatly acknowledged. R. E. thanks MICINN for the FPI grant PRE2020-092118. The authors thanks CONICET (External Fellowship of NSF, PIP 2021 11220200100315CO), ANPCyT (PICT 2019-0631, PICT Start Up 2020-0034, PICT 2020–02169), UNLP (11/X900), RTI2018-101506-B-C33 from the Ministerio de Ciencia, Innovacion y Universidades (MICIU/FEDER), from Spain. The authors thanks J.A. Jim´enez and I. Llorente (XRD), M.Maher and A. Tom´as (SEM-EDS), M. Acedo (machining) and the students J. Terreros, A. Carde˜na and C. Rodríguez-Casta˜neda (BM).
e_Buah Biblioteca Digital Universidad de Alcalá
Publicación Artículo científico (JournalArticle)

Sandwich-type composites based on self-healing ionomeric polymer and electrospun microfibers

  • Sessini, Valentina|||0000-0003-1205-4586
  • López Galisteo, Antonio Julio
  • Leonés, Adrián
  • Ureña, Alejandro
  • Peponi, Laura
Taking advance of the fiber-reinforced polymer process, commonly used in the fabrication of polymer composites, in this work we used electrospun microfibers to reinforce self-healing ionomeric polymers producing sandwich-type composites. In particular, three-layer stack with poly(lactic acid), PLA, electrospun fibers in between two layers of commercial smart polymers has been obtained based on poly(ethylene-co-methacrylic acid) (EMAA) copolymers, well-know with the tradename of Nucrel® and Surlyn®, both of them manufactured by Dupont&#8482; Company. Surlyn® is the corresponding ionomer of Nucrel® in which the MAA groups are partially neutralized with sodium ions. In general, one of the main problems of thermoplastic composites, that provoke a lower impregnation of the fiber, is the high viscosity of the molten matrix. Therefore, in this work, we used electrospun microfibers in order to solve impregnation problem, thus considering that electrospinning process is an accessible, versatile and low-cost technique for fibers formation in the range of micron and nanometers. In order to create the sandwich-type structure, firstly, the optimization of the processing window has achieved in order to maintain the randomly oriented fiber structure on the final composites. In particular, the creation of sandwich-type structure with Surlyn® reinforced with woven non-woven electrospun fibers based on PLA with enhanced mechanical as well as hardness and wear resistance can be used for future active packaging solutions., Ministerio de Economía, Industria y Competitividad, Comunidad de Madrid