Pasar al contenido principal

-

IJCI-2015-26432

•
Nombre agencia financiadora Ministerio de Ciencia e Innovación
Acrónimo agencia financiadora MICINN
Programa Programa Estatal de Promoción del Talento y su Empleabilidad en I+D+i
Subprograma Subprograma Estatal de Incorporación
Convocatoria Juan de la Cierva Incorporación
Año convocatoria 2015
Plan Estatal 2013-2016 Plan Estatal de Investigación Científica y Técnica y de Innovación
Unidad de gestión Dirección General de Investigación Científica y Técnica
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)
Identificador persistente http://dx.doi.org/10.13039/501100004837

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Multifunctional PLA Blends Containing Chitosan Mediated Silver Nanoparticles: Thermal, Mechanical, Antibacterial, and Degradation Properties

  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Madani, Salim
  • Rodríguez, Gema
  • Hevilla, Víctor
  • Echeverría, Coro
  • Fernández-Garcia, Marta
  • Muñoz-Bonilla, Alexandra
  • Charef, Noureddine
  • López, Daniel
[EN] Poly(lactic acid) (PLA) is one of the most commonly employed synthetic biopolymers for facing plastic waste problems. Despite its numerous strengths, its inherent brittleness, low toughness, and thermal stability, as well as a relatively slow crystallization rate represent some limiting properties when packaging is its final intended application. In the present work, silver nanoparticles obtained from a facile and green synthesis method, mediated with chitosan as a reducing and stabilizing agent, have been introduced in the oligomeric lactic acid (OLA) plasticized PLA in order to obtain nanocomposites with enhanced properties to find potential application as antibacterial food packaging materials. In this way, the green character of the matrix and plasticizer was preserved by using an eco-friendly synthesis protocol of the nanofiller. The X-ray diffraction (XRD) and differential scanning calorimetry (DSC) results proved the modification of the crystalline structure as well as the crystallinity of the pristine matrix when chitosan mediated silver nanoparticles (AgCH-NPs) were present. The final effect over the thermal stability, mechanical properties, degradation under composting conditions, and antimicrobial behavior when AgCH-NPs were added to the neat plasticized PLA matrix was also investigated. The obtained results revealed interesting properties of the final nanocomposites to be applied as materials for the targeted application., This research was funded by Spanish Ministry of Science, Innovation and Universities (AEI-MICINN/FEDER); Projects MAT2016-78437-R and MAT2017-88123-P. A.S. acknowledges her APOSTD/2018/228 postdoctoral contract from the Education, Research, Culture and Sport Council from the Government of Valencia. C.E. acknowledges IJCI-2015-26432 contract from MICINN.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Biodegradable and Antimicrobial PLA-OLA Blends Containing Chitosan-Mediated Silver Nanoparticles with Shape Memory Properties for Potential Medical Applications

  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Madani, Salim
  • Muñoz-Bonilla, Alexandra
  • Fernández-Garcia, Marta
  • Peponi, Laura
  • Leones, Adrián
  • Rodríguez, Gema
  • Echeverría, Coro
  • López, Daniel
[EN] To use shape memory materials based on poly (lactic acid) (PLA) for medical applications is essential to tune their transition temperature (T-trans) near to the human body temperature. In this study, the combination of lactic acid oligomer (OLA), acting as a plasticizer, together with chitosan-mediated silver nanoparticles (AgCH-NPs) to create PLA matrices is studied to obtain functional shape memory polymers for potential medical applications. PLA/OLA nanocomposites containing different amounts of AgCH-NPs were obtained and profusely characterized relating their structure with their antimicrobial and shape memory performances. Nanocomposites exhibited shape memory responses at the temperature of interest (near physiological one), as well as excellent shape memory responses, shorter recovery times and higher recovery ratios (over 100%) when compared to neat materials. Moreover, antibacterial activity tests confirmed biocidal activity; therefore, these functional polymer nanocomposites with shape memory, degradability and biocidal activity show great potential for soft actuation applications in the medical field., This research was funded by Spanish Ministry of Science and Innovation (AEIMICINN/FEDER); Projects MAT2016-78437-R, MAT2017-88123-P and PCIN-2017-036. A. S. acknowledges her ¿APOSTD/2018/228¿ and ¿PAID-10-19¿ postdoctoral contracts from the Education, Research, Culture and Sport Council from the Government of Valencia and from the Polytechnic University of Valencia, respectively. C.E. acknowledges the IJCI-2015-26432 contract from MICINN. L.P. acknowledges the Ramon y Cajal (RYC-2014-15595) contract from MICINN.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functional Stimuli-Responsive Gels: Hydrogels and Microgels

  • Echeverría, Coro
  • Fernandes, Susete N.
  • Godinho, Maria H.
  • Borges, João Paulo
  • Soares, Paula I. P.
One strategy that has gained much attention in the last decades is the understanding and further mimicking of structures and behaviours found in nature, as inspiration to develop materials with additional functionalities. This review presents recent advances in stimuli-responsive gels with emphasis on functional hydrogels and microgels. The first part of the review highlights the high impact of stimuli-responsive hydrogels in materials science. From macro to micro scale, the review also collects the most recent studies on the preparation of hybrid polymeric microgels composed of a nanoparticle (able to respond to external stimuli), encapsulated or grown into a stimuli-responsive matrix (microgel). This combination gave rise to interesting multi-responsive functional microgels and paved a new path for the preparation of multi-stimuli “smart” systems. Finally, special attention is focused on a new generation of functional stimuli-responsive polymer hydrogels able to self-shape (shape-memory) and/or self-repair. This last functionality could be considered as the closing loop for smart polymeric gels., This work is funded by National Funds through FCT—Portuguese Foundation for Science and Technology, Reference UID/CTM/50025/2013 and FEDER funds through the COMPETE 2020 Program under the project number POCI-01-0145-FEDER-007688. C. Echeverria acknowledges the Juan de la Cierva contract (IJCI-2015-26432) from MINECO—Spanish Ministry of Economy, Industry and Competitiveness.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermoresponsive Poly(N-Isopropylacrylamide-co-Dimethylaminoethyl Methacrylate) Microgel Aqueous Dispersions with Potential Antimicrobial Properties

  • Echeverría, Coro
  • Aragón-Gutiérrez, Alejandro
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
  • López García, Daniel
The work herein describes the preparation of thermoresponsive microgels with potential antimicrobial properties. Most of the work performed so far regarding microgels with antimicrobial activity, deals with the ability of microgels to carry and release antibiotics or antimicrobial agents (antimicrobial peptides). The originality of this work lies in the possibility of developing intrinsic antimicrobial microgels by copolymerization of the well-known thermoresponsive monomer, <i>N</i>-isopropylacrylamide (NIPAM) with dimethylaminoethyl methacrylate (DMAEMA), a water-soluble monomer, to form microgels via precipitation polymerization (radical polymerization). Due to the presence of a tertiary amine in the DMAEMA comonomer, microgels can be modified by <i>N</i>-alkylation reaction with methyl and butyl iodide. This quaternization confers positive charges to the microgel surfaces and thus the potential antimicrobial activity. The effect of DMAEMA content and its quaternization with both, methyl and butyl iodide is evaluated in terms of thermal and surface charge properties, as well as in the microgel size and viscoelastic behavior. Finally, a preliminary study of the antimicrobial activity against different microorganisms is also performed in terms of minimum inhibitory concentration (MIC). From this study we determined that in contrast with butylated microgels, methylated ones show potential antimicrobial activity and good physical properties besides of maintaining microgel thermo-responsiveness., This work was funded by MAT2017-88123-P and MAT2016-78437-R (FEDER–EU). CE also acknowledges IJCI-2015-26432 contract from MINEICO., We acknowledge support by the CSIC Open Access Publication Initiative through its Unit of Information Resources for Research (URICI)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Porous Microstructured Surfaces with pH-Triggered Antibacterial Properties

  • Campo, Ángel Adolfo del
  • Echeverría, Coro
  • San Martín, Miguel
  • Cuervo-Rodríguez, Rocío
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
New antibacterial films are designed with the capability to reversibly regulate their killing and repelling functions in response to variations in environmental pH. These systems consist of porous polystyrene surfaces as the main components and a copolymer bearing pH-sensitive thiazole and triazole groups as the minor components. These pH-sensitive groups, located on the surfaces, can be partially protonated at acidic pH levels, increasing the positive charge density of the surfaces and their antibacterial activity. Similarly, their bacterial adhesion and killing efficiencies in response to changes in pH are evaluated by analyzing the bacterial viability of Staphylococcus aureus bacteria on the surfaces under acidic and neutral pH values. It is demonstrated that after only 1 h of incubation with the bacterial suspension in acidic conditions, the surfaces killed the bacteria, while at pH = 7.4, some of the adhered bacteria are removed. Furthermore, the surface topography exerts an important role by intensifying this response., This work was supported financially by the MINECO (Project MAT2016- 78437-R and Project MAT2017-86450-C4-1-R), the Agencia Estatal de Investigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by CSIC (Project 201760I064). C.E. also acknowledges MINECO for her IJCI-2015-26432 contract, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A way to predict gold nanoparticles/polymer hybrid microgel agglomeration based on rheological studies

  • Echeverría, Coro
  • Mijangos, Carmen
In this work, a detailed rheological study of hybrid poly(acrylamide-co-acrylic acid) P(AAm-co-AAc) aqueous microgel dispersions is performed. Our intention is to understand how the presence of gold nanoparticles, AuNP, embedded within the microgel matrix, affects the viscoelastic properties, the colloidal gel structure formation, and the structure recovery after cessation of the deformation of the aqueous microgel dispersions. Frequency sweep experiments confirmed that hybrid microgel dispersions present a gel-like behavior and that the presence of AuNP content within microgel matrix contributes to the elasticity of the microgel dispersions. Strain sweep test confirmed that hybrid microgels aqueous dispersion also form colloidal gel structures that break upon deformation but that can be recovered when the deformation decreases. The fractal analysis performed to hybrid microgels, by applying Shih et al. and Wu and Morbidelli’s scaling theories, evidenced that AuNP significantly affects the colloidal gel structure configuration ending up with the formation of agglomerates or microgel clusters with closer structures in comparison to the reference P(AAm-co-AAc) aqueous microgel dispersions., CE acknowledges IJCI-2015-26432 contract from MINECO., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Understanding the influence of carbon nanotubes on the flow behavior of liquid crystalline hydroxypropylcellulose: A Rheo-NMR study

  • Echeverría, Coro
  • Almeida, Pedro L.
  • Figueirinhas, J. L.
  • Godinho, Maria H.
Hydroxypropylcellulose (HPC) is an important cellulose derivative that has been widely studied due to its water-solubility, biocompatibility and biodegradability, but even more significant due to its ability to form liquid crystalline phases. HPC is able to form, under certain conditions, chiral nematic (cholesteric) structures in water solutions. Previous work confirmed that films prepared from liquid crystalline HPC/water solutions (LC-HPC) gave rise to anisotropic networks, with similar mechanical and optical characteristics of Liquid Crystalline Elastomers (LCE), capable to respond to humidity. It was also demonstrated that the incorporation of carbon nanotubes (CNTs) significantly improved the actuator responsiveness. In the work presented herein, we investigate how the incorporation of carbon nanotubes affects the flow behavior of LC-HPC solutions, and thus the structure-properties relationship, through a detailed Rheo-NMR study. As observed from the results, when shearing the samples, the degree of order reached (maximum quadrupolar peak splitting) by LC-HPC solutions increases with CNT content. Regarding the subsequent relaxation process, only the incorporation of 0.01 wt% of CNTs (lowest content) contributes to a faster recovery of cholesteric structure., The authors acknowledge funding from FEDER through the COMPETE 2020 Program and National Funds through FCT-Portuguese Foundation for Science and Technology under projects UID/CTM/ 50025/2013 and M-ERA-NET2/0007/2016 (CellColor). P.L.A. acknowledges financial support from Portuguese Foundation for Science and Technology through the project PTDC/FIS-NAN/0117/2014. J.L.F acknowledges financial support from Portuguese Foundation for Science and Technology through CeFEMA strategic project UID/CTM/ 04540/2019. C.E. acknowledges the Portuguese Ministry of Science, Technology and Higher Education for National Funds, European Social Funds and FCT for the PostDoc fellowship with reference SFRH/BPD/ 88779/2012 and the Spanish Ministry of Science, Innovation, and Universities for her IJCI-2015-26432 contract. The authors declare no competing interests. All data is available in the main text or the supplementary Information, Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Adhesive antibacterial coatings based on copolymers bearing thiazolium cationic groups and catechol moieties as robust anchors

  • Chiloeches, Alberto
  • Echeverría, Coro
  • Cuervo-Rodríguez, Rocío
  • Plachà, D.
  • López-Fabal, Fátima
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
Herein, we describe a simple approach for the preparation of antibacterial polymeric coatings based on mussel inspired catechol chemistry. A series of statistical copolymers composed of 2-(4-methylthiazol-5-yl)ethyl methacrylate (MTA) and N-(3,4-dihydroxyphenethyl) methacrylamide (DOMA) were synthesized by conventional free radical and reversible addition fragmentation chain transfer (RAFT) polymerizations. Subsequently, the thiazole groups of MTA units were quaternized with methyl and butyl iodide as alkylating agents to provide cationic copolymers with also adhesive anchoring groups of catechol. The copolymers were systematically studied to investigate the effects of composition (MTA/DOMA ratio), molecular weight and alkylating agent on adhesive and antibacterial properties. It was proved that DOMA units play a major role in the adhesion, while the antibacterial activity only decreases slightly with content of DOMA up to 32%. Remarkable, for similar MTA molar equivalent, the copolymers with higher molecular weight exhibit better antimicrobial properties in solution, whereas when they are tethered onto a surface as a coating, the copolymers with lower molecular weight showed enhanced antibacterial performance even against Gram-negative bacteria. These findings confirm that antimicrobial polymers attached onto surfaces behave in a different manner than in solution, and can be more effective as the mobility and accessibility of the cationic groups increase., This work was funded by the MINECO (Project MAT2016-78437-R), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by CSIC (Project I-LINK1191). C. Echeverria also acknowledges MINECO for her IJCI-2015-26432 contract. D. Plachá also thanks to MŠMT CR (Project SP 2019/23)., Peer Reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of polymer composition and substrate on the performance of bioinspired coatings with antibacterial activity

  • Chiloeches, Alberto
  • Echeverría, Coro
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
© The Author(s)., A series of methacrylic copolymers bearing thiazolium cationic groups and catechol moieties were evaluated as antibacterial coatings on a variety of materials including aluminum and plastics such as polycarbonate, poly(methyl methacrylate), and silicone rubber. The thermal properties of the copolymers were first studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The cationic copolymers were thermally stable up to 200 °C and presented glass transition temperatures values well above 100 °C; thus, an acceptable thermal behavior for typical biomedical applications. The cationic copolymers with variable content of the adhesive anchoring N-(3,4-dihydroxyphenethyl) methacrylamide (DOMA) units were coated onto the metal and polymeric substrates by drop casting and the adhesive properties of the obtained coatings were further evaluated as a function of DOMA content and substrate. Optical profilometry, attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectra, and antimicrobial studies reveal that the coatings adhere stronger to metal substrates than to the polymeric substrates. The copolymers with higher content of DOMA, 24 mol.%, resist solvent erosion treatment when coated onto all substrates and exhibit antimicrobial activity against Gram-positive S. aureus bacteria after this erosion treatment. In contrast, copolymers with low content, 9 mol.% of DOMA, only remain attached onto the aluminum metal substrate after solvent treatment, while on polymeric substrates the coatings are almost removed and do not show any efficacy against S. aureus bacteria., This research was funded by the MINECO (Project MAT2016-78437-R), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU). C. Echeverria also acknowledges MINECO for her IJCI-2015-26432 contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antibacterial PLA Fibers Containing Thiazolium Groups as Wound Dressing Materials

  • Echeverría, Coro
  • Muñoz-Bonilla, Alexandra
  • Cuervo-Rodríguez, Rocío
  • López García, Daniel
  • Fernández-García, Marta
The development of inherent antimicrobial polymeric fibers can contribute to overcoming the increasing problem of infectious diseases and multiresistant microorganisms. Here, we propose the preparation of poly(lactic acid) (PLA) based electrospun fibers blended with poly[2-(4-methylthiazol-5-yl)ethyl methacrylate] (PMTA), which quaternized have proven broad spectrum antimicrobial activity either in solution or solid state. We have demonstrated that quaternized PLA/PMTA fiber mats have a remarkable antibacterial activity against S. aureus. As determined by scanning electron microscopy and Raman spectroscopy, quaternized PMTA segregates toward the outmost surface of PLA/PMTA fiber leaving the thiazolium group widely available onto the fiber surfaces, facilitating the bacteria killing by contact mode., This work was funded by MAT2017-88123-P and MAT2016- 78437-R (FEDER−EU). C.E. also acknowledges IJCI-2015- 26432 contract from MINEICO. The authors also acknowledge Dr. Leoncio Garrido for the feedback in the electrospinning.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Multifunctional Biodegradable Nanocomposites based on PLA and Chitosan-coated Silver Nanoparticles

  • Sonseca, Águeda
  • Madani, S.
  • Echeverría, Coro
  • Rodríguez, G.
  • Leonés, Adrián
  • Peponi, Laura
  • Chavef, N.
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
  • Foiri, S.
  • López García, Daniel
Significant progress has been made in the last years in the study of biodegradable polymer materials with functionalities similar to those of non-biodegradable polymers, both of natural and of synthetic origin, extending their applicability to fields like food packaging, production of biomedical materials, agriculture, etc. In this sense, biodegradable nanocomposites offer new and exciting possibilities. We report on the development of multifunctional polymer nanocomposites that can undergo biodegradation in composting conditions. In particular, a research on the thermally-activated shape memory behaviour of films based on polylactic acid (PLA) and chitosan-coated silver nanoparticles (Ag@chitosan) was conducted with the purpose of obtaining a suitable material to be used in potential food packaging applications. In order to increase the stretchability of the films, 20 wt% of oligomeric lactic acid was added as plasticizer. Six different PLA-OLA-Ag@chitosan formulations with different proportions of Ag@chitosan from 0 to 5 wt.% were processed by extrusion. Subsequently, films were obtained by compression moulding at 180ºC and 50 Pas. Nanocomposite films were characterized for their thermal and mechanical properties in order to fix the experimental conditions for the shape memory experiments. The PLA capability to present shape memory behaviour was studied at 60ºC, and temperatures around 45°C. The recovery and fixity ratio of the different PLA-OLA-Ag@chitosan formulations studied here showed suitable shape memory behaviour with good values of strain fixity, as well as strain recovery ratios. Finally, bionanocomposite films showed appropriate disintegration in compost conditions in preliminary results (not shown here). Thus, showing their potential as biobased and biodegradable multifuctional active food packaging materials., This work is funded by MAT2017-88123-P. AS, CE and LP also acknowledge FJCI-2015-24405, IJCI-2015-26432 and RYC-2014-15595 contracts from MINEICO, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación

Biodegradable and antimicrobial PLA-OLA blends containing chitosan-mediated silver nanoparticles with shape memory properties for potential medical applications

  • Sonseca, Águeda
  • Madani, Salim
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
  • Peponi, Laura
  • Leonés, Adrián
  • Rodríguez, Gema
  • Echeverría, Coro
  • López García, Daniel
To use shape memory materials based on poly (lactic acid) (PLA) for medical applications is essential to tune their transition temperature (Ttrans) near to the human body temperature. In this study, the combination of lactic acid oligomer (OLA), acting as a plasticizer, together with chitosan-mediated silver nanoparticles (AgCH-NPs) to create PLA matrices is studied to obtain functional shape memory polymers for potential medical applications. PLA/OLA nanocomposites containing different amounts of AgCH-NPs were obtained and profusely characterized relating their structure with their antimicrobial and shape memory performances. Nanocomposites exhibited shape memory responses at the temperature of interest (near physiological one), as well as excellent shape memory responses, shorter recovery times and higher recovery ratios (over 100%) when compared to neat materials. Moreover, antibacterial activity tests confirmed biocidal activity; therefore, these functional polymer nanocomposites with shape memory, degradability and biocidal activity show great potential for soft actuation applications in the medical field., This research was funded by Spanish Ministry of Science and Innovation (AEIMICINN/FEDER); Projects MAT2016-78437-R, MAT2017-88123-P and PCIN-2017-036. A. S. acknowledges her “APOSTD/2018/228” and “PAID-10-19” postdoctoral contracts from the Education, Research, Culture and Sport Council from the Government of Valencia and from the Polytechnic University of Valencia, respectively. C.E. acknowledges the IJCI-2015-26432 contract from MICINN. L.P. acknowledges the Ramon y Cajal (RYC-2014-15595) contract from MICINN., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Physical methods for controlling bacterial colonization on polymer surfaces

  • Echeverría, Coro
  • Der Torossian Torres, Marcelo
  • Fernández-García, Marta
  • Fuente-Núñez, César de la
  • Muñoz-Bonilla, Alexandra
The adhesion and formation of microbial biofilm on material surfaces is a relevant problem in many areas including in medicine and biomaterials engineering. Biofilms are the primary cause of persistent infections associated with biomedical devices and clinical settings due to their tolerance and resistance to antimicrobial treatment. Reducing initial bacterial attachment to surfaces could decrease the formation of biofilms and, consequently, the posterior dispersion stage in which bacteria present within biofilms expand to other regions, spreading the infection. In this context, the use of surface topography to minimize microbial infections and biofilm formation represents an emerging area of research as it tackles this problem without the need to use antibiotics or other chemical agents. Herein, we review recent progress in surface topography-based antimicrobial approaches and provide an overview of the influence of micro- and nano-topography on bacterial surface attachment. We focus primarily on structured polymeric surfaces. The versatility and properties of polymer materials, along with their propensity to standardization at different length scales, make them an excellent option for fabrication of numerous medical devices. This work also provides a brief overview of recent advances in patterning polymers using lithography, direct-write patterning techniques, and instability-induced patterning. The impact of micro-, nano- and hierarchical surface structuration on the antimicrobial response of polymeric surfaces is addressed to offer new insights for the preparation of antimicrobial materials., This work was supported financially by “la Caixa” Foundation SEED FUND (project MIT-CAIXA "LCF/PR/MIT17/11820010), by MINECO (Project MAT2016-78437-R), the Agencia Estatal de Investigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU). C.E. also acknowledges MINECO for her IJCI-2015-26432 contract. Cesar de la Fuente-Nunez holds a Presidential Professorship at the University of Pennsylvania, is a recipient of the Langer Prize by the AIChE Foundation, and acknowledges funding from the Institute for Diabetes, Obesity, and Metabolism and the Penn Mental Health AIDS Research Center of the University of Pennsylvania.