Pasar al contenido principal

POLIMEROS SOSTENIBLES BIOBASADOS CON ACTIVIDAD ANTIMICROBIANA

PID2019-104600RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 32
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Reseña (Review)

Enzymatic Synthesis of Polyesters and Their Bioapplications: Recent Advances and Perspectives

  • Hevilla, Víctor
  • Echeverría, Coro
  • Muñoz-Bonilla, Alexandra
  • Fernandez-Garcia, Marta
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
[EN] This article reviews the most important advances in the enzymatic synthesis of polyesters. In first place, the different processes of polyester enzymatic synthesis, i.e., polycondensation, ring opening, and chemoenzymatic polymerizations, and the key parameters affecting these reactions, such as enzyme, concentration, solvent, or temperature, are analyzed. Then, the latest articles on the preparation of polyesters either by direct synthesis or via modification are commented. Finally, the main bioapplications of enzymatically obtained polyesters, i.e., antimicrobial, drug delivery, or tissue engineering, are described. It is intended to point out the great advantages that enzymatic polymerization present to obtain polymers and the disadvantages found to develop applied materials., This work was funded by the MICINN (PID2019-104600RB-I00), the Agencia Estatal de Investigacion (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU). A.S. acknowledges her "PAID-10-19" postdoctoral contract from the Polytechnic University of Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Straightforward Enzymatic Methacrylation of Poly(Glycerol Adipate) for Potential Applications as UV Curing Systems

  • Hevilla, Víctor
  • Fernandez-Garcia, Marta
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
[EN] Enzymatic one-pot synthesis procedures in a one-step and two-step monomers addition were developed to obtain poly(glycerol adipate) macromers with methacrylate end-functional groups under the presence of 1 and 3 wt% of Candida antarctica lipase B (CALB). Glycerol, divinyl adipate, and vinyl methacrylate were enzymatically reacted (vinyl methacrylate was either present from the beginning in the monomers solution or slowly dropped after 6 h of reaction) in tetrahydrofuran (THF) at 40 °C over 48 h. Macromers with a methacrylate end groups fraction of ¿52% in a simple one-pot one-step procedure were obtained with molecular weights (Mn) of ¿7500-7900 g/mol. The obtained products under the one-pot one-step and two steps synthesis procedures carried out using 1 and 3 wt% of a CALB enzymatic catalyst were profusely characterized by NMR (1H and 13C), MALDI-TOF MS, and SEC. The methacrylate functional macromers obtained with the different procedures and 1 wt% of CALB were combined with an Irgacure® 369 initiator to undergo homopolymerization under UV irradiation for 10 and 30 min, in order to test their potential to obtain amorphous networks within minutes with similar properties to those typically obtained by complex acrylation/methacrylation procedures, which need multiple purification steps and harsh reagents such as acyl chlorides. To the best of our knowledge, this is the first time that it has been demonstrated that the obtention of methacrylate-functional predominantly linear macromers based on poly(glycerol adipate) is able to be UV crosslinked in a simple one-step procedure., This work was funded by the Ministerio de Ciencia e Innovacion (project PID2019-104600RB-I00), the Agencia Estatal de Investigacion (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by the Valencian Autonomous Government, Generalitat Valenciana, GVA (GV/2021/182).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photocuring of aliphatic-lineal poly(glycerol adipate) with a monomer bearing thiazolium groups as a promising approach for biomedical applications

  • Hevilla, V.
  • Echeverría, C.
  • Muñoz-Bonilla, A.
  • Fernández-García, M.
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
[EN] In this work, we described the combination of photocurable methacrylic monomer and poly(glycerol adipate) (PGA) macromer to form networks that can be further quaternized to provide antimicrobial character. Both monomers were synthesized enzymatically. Networks with different content of methacrylic monomer were prepared and further characterized by water contact angle measurements, surface charge, soluble fractions, differential scanning calorimetry and microhardness to determine the effect of the methacrylic monomer in the PGA network. Methacrylic monomer affected the mechanical behavior but did not alter the surface wettability, whereas the quaternization did not alter the wettability nor the mechanical properties of the network surfaces. Finally, the obtained network with the introduced permanent cationic charges were tested against Gram-positive S. aureus and Gram-negative E. coli bacteria showing remarkable antimicrobial activity which increased with the content of methacrylic monomer in the network. Moreover, the assays against red blood cells demonstrated that networks are no toxic., This work was funded by the MICINN (project PID2019-104600RB-I00), the Agencia Estatal de Investigacion (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by the Valencian Autonomous Government, Generalitat Valenciana, GVA (GV/2021/182).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Photocured Poly(Mannitol Sebacate) with Functional Methacrylic Monomer: Analysis of Physical, Chemical, and Biological Properties

  • Hevilla, Víctor
  • Echeverría, Coro
  • Muñoz-Bonilla, Alexandra
  • Fernandez-Garcia, Marta
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
[EN] In this work, we described the formation of polymeric networks with potential antimicrobial character based on an acrylate oligomer, poly(mannitol sebacate) (PMS), and an enzymatically synthesized methacrylic monomer with thiazole groups (MTA). Networks with different content of MTA were prepared, and further physico-chemically characterized by microhardness, water contact angle measurements, and differential scanning calorimetry. Monomer incorporation into the networks and subsequent quaternization to provide thiazolium moieties affected the mechanical behavior and the surface wettability of the networks. Moreover, the introduction of permanent cationic charges in the network surface could give antimicrobial activity to them. Therefore, the antibacterial behavior and the hemotoxicity were analyzed against Gram-positive and Gram-negative bacteria and red blood cells, respectively., This work was funded by the Ministerio de Ciencia e Innovación (project PID2019-104600RB-I00), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by the Valencian Autonomous Government, Generalitat Valenciana, GVA (GV/2021/182).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Glycerol-based enzymatically synthesized renewable polyesters: Control of molecular weight, degree of branching and functional endgroups

  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Giménez Torres, Enrique|||0000-0002-6330-0209
  • Hevilla Talavera, Víctor
  • López García, Daniel
  • Fernández García, Marta
[EN] The catalytic specificity of Lipase B from Candida antarctica (CALB) has been exploited to achieve specific terminal groups for the synthesis of glycerol poly(ester)s. This permits the preparation of glycerol-derived macromers able to undergo further reactions/chemical modifications for customization as functional systems and building blocks for polymer synthesis. Poly(glycerol adipate) based macromers with different terminal structures were achieved from the reaction between glycerol and divinyl adipate by varying the stoichiometry (from equimolar to 1.5 and 3.0 excess either of glycerol or divinyl adipate) and amount of catalyst (1 and 3 wt%). In the course of polymerization, transesterification and hydrolysis reactions occur over vinyl functionalities that result in acid endgroups. Thus, the resulting macromers are either terminated with hydroxyl groups and/or acid groups and/or vinyl groups. Therefore, an understanding of how acid functionality appears (from vinyl groups hydrolysis) and its quantification under various conditions may provide an opportunity for the design of synthetic strategies to avoid acid production and obtain the desired structures. Endgroup analysis was carried out using 1H NMR and 13C NMR spectroscopies and MALDI-TOF spectrometry. Mainly linear hydroxyl and vinyl-terminated macromers were obtained with high efficiency without significant hydrolysis of the chain ends (for vinyl terminated)., This work was funded by the GVA (GV/2021/182), the MICINN (PID2019-104600RB-100), the Agencia Estatal de Investigacion (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU). A. S. acknowledges her "APOSTD/2018/228" and "PAID-10-19" postdoctoral contracts from Culture and Sport Council from the Government of Valencia and from the Polytechnic University of Valencia, respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

The Incorporation of Low-Molecular Weight Poly(Mannitol Sebacate)s on PLA Electrospun Fibers: Effects on the Mechanical Properties and Surface Chemistry

  • Hevilla, V.
  • Echevarría, C.
  • Muñoz-Bonilla, A.
  • Fernández-Garcia, Marta
  • Sonseca Olalla, Agueda|||0000-0002-2776-4399
  • Giménez Torres, Enrique|||0000-0002-6330-0209
[EN] We offer a report on the synthesis of low-molecular weight biobased poly(mannitol sebacate) (PMS) and its functionalization with acrylate groups (PMSAc). These synthesized polyesters were blended at a low level (10 wt%) with poly (lactic acid) PLA to prepare aligned fibers by electrospinning, coupled with a rotatory collector. The obtained fibers were extensively studied by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and wide-angle X-ray diffraction (WAXS), employing synchrotron radiation. The incorporation of the PMSs on the PLA fibers did not significantly affect the fiber diameters, whereas the alignment was almost maintained. The crystallinity and thermal properties were also slightly modified with the addition of PMSs, and an increase in the degree of crystallinity and in the glass transition temperature of the blend compared to PLA was observed. Remarkably, the PLA/PMSs fibers were more ductile due to the elastomeric character of PMS, with higher values of elongation at break and tensile strengths, and a smaller Young modulus in comparison with the PLA fibers. These modifications of the properties were more noticeable in the case of the acrylated PMS, which also provided readily available functional groups at the surface for further chemical reactions, such as the Michael addition or crosslinking processes., This work was funded by the MICINN (project PID2019-104600RB-I00) and by the Valencian Autonomous Government, Generalitat Valenciana, GVA (GV/2021/182). The synchrotron experiments were performed at beamlines BL11-NCD-SWEET and MIRAS at ALBA Synchrotron Light Facility and authors would like to thank the help of ALBA staff. Authors also thank M.L. Cerrada for her invaluable discussions on crystallinity. Authors thank T.M. Díez-Rodríguez and E. Blázquez-Blázquez for conducting some tests. A. S. acknowledges her APOSTD/2018/228 and PAID-10-19 postdoctoral contracts from the Education, Research, Culture and Sport Council from the Government of Valencia and from the Polytechnic University of Valencia, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemical Hydrogels Bearing Thiazolium Groups with a Broad Spectrum of Antimicrobial Behavior

  • Muñoz-Bonilla, Alexandra
  • Zagora, Jakub
  • Plachá, Daniela
  • Echeverría, Coro
  • Chiloeches, Alberto
  • Fernández-García, Marta
© 2020 by the authors., Several hydrogels based on 2-hydroxyethyl methacrylate and a methacrylic monomer containing a thiazole group in its lateral chain have been prepared by thermal polymerization at 60 °C in water solution varying the chemical composition of the gels. The posterior quaternization of the thiazole groups with methyl iodine has rendered positively charged hydrogels with potential antimicrobial activity. This modification has been structurally characterized by infrared spectroscopy, whereas the thermal stability of all hydrogels has been studied by thermal degradation in inert atmosphere. The swelling behavior in distilled water and the rheology of the different hydrogels have been analyzed as a function of 2-(4-methylthiazol-5-yl)ethyl methacrylate (MTA) monomer content as well as its methylation. Finally, the active character of hydrogels against Gram-positive and Gram-negative bacteria and fungi has been evaluated, revealing excellent antimicrobial activity against all tested microorganisms. The methylated hydrogels could be used as potential materials for wound healing or contact lens applications., This work was funded by the CSIC (i-LINK4911), MINECO (Project MAT2016-78437-R), MICINN (PID2019-104600RB-I00), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by Ministry of Education of the Czech Republic through the SGS project SP2020/70 and project No. CZ.02.1.01/0.0/0.0/17\_049/0008441 “Innovative Therapeutic Methods of Musculoskeletal System in Accident Surgery” within the Operational Programme Research, Development, and Education., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of Highly Crystalline Polylactic Acid with β-Crystalline Phase from the Induced Alignment of Electrospun Fibers

  • Echeverría, Coro
  • Limón, Irene
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
  • López García, Daniel
Polylactic acid (PLA) is one of the known synthetic polymers with potential piezoelectric activity but this property is directly related to both the crystalline structure and crystalline degree. Depending on the process conditions, PLA can crystallize in three different forms: α-, β-, and γ- form, with β-crystalline phase being the piezoelectric one. To obtain this crystalline structure, transformation of α to β is required. To do so, the strategies followed so far consisted in annealing or/and stretching of previously obtained PLA in the form of films or fibers, that is, additional post-processing steps. In this work, we are able to obtain PLA fibers with high macromolecular alignment, as demonstrated by SEM, and in the β polymorph, as detected by X-ray diffraction (XRD) without the requirement of post-processing. For that, PLA fibers were prepared by using an electrospinning coupled to a drum collector. This set up and the optimization of the parameters (voltage flow-rate, and drum collector speed) induced molecular stretching giving rise to uniaxially oriented and highly aligned fibers., This work was funded by the MICINN (MAT2017-88123-P, PID2019-104600RB-I00), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biobased polymers derived from itaconic acid bearing clickable groups with potent antibacterial activity and negligible hemolytic activity

  • Chiloeches, Alberto
  • Funes, A.
  • Cuervo-Rodríguez, Rocío
  • López-Fabal, F.
  • Fernández-García, Marta
  • Echeverría, Coro
  • Muñoz-Bonilla, Alexandra
Herein, we report, for the first time, the synthesis of clickable polymers derived from biobased itaconic acid, which was then used for the preparation of novel cationic polymers with antibacterial properties and low hemotoxicity via click chemistry. Itaconic acid (IA) was subjected to chemical modification by incorporating clickable alkyne groups on the carboxylic acids. The resulting monomer with pendant alkyne groups was easily polymerized and copolymerized with dimethyl itaconate (DMI) by radical polymerization. The feed molar ratio of comonomers was varied to precisely tune the content of alkyne groups in the copolymers and the amphiphilic balance. Subsequently, an azide with a thiazole group, which is a component of the vitamin thiamine (B1), was attached onto the polymers by copper-catalyzed azide-alkyne cycloaddition (CuAAC) click chemistry leading to triazole linkages. N-Alkylation reactions of the thiazole and triazole groups with methyl and butyl iodides provide the corresponding itaconate derivatives with pendant azolium groups. The copolymers with variable cationic charge densities and hydrophobic/hydrophilic balances, depending on the comonomer feed ratio, display potent antibacterial activity against Gram-positive bacteria, whereas the activity was almost null against Gram-negative bacteria. Hemotoxicity assays demonstrated that the copolymers exhibited negligible hemolysis and excellent selectivity, more than 1000-fold, for Gram-positive bacteria over human red blood cells. This journal is, This work was funded by the MICINN (PID2019- 104600RB-I00), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU). A. Chiloeches acknowledges MICIU for his FPU fellowship FPU18/01776.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of highly crystalline polylactic acid with β-crystalline phase from the induced alignment of electrospun fibers

  • Echeverría, Coro
  • Limón, Irene
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
  • López García, Daniel
Polylactic acid (PLA) is one of the known synthetic polymers with potential piezoelectric activity but this property is directly related to both the crystalline structure and crystalline degree. Depending on the process conditions, PLA can crystallize in three different forms: α-, β-, and γ- form, with β-crystalline phase being the piezoelectric one. To obtain this crystalline structure, transformation of α to β is required. To do so, the strategies followed so far consisted in annealing or/and stretching of previously obtained PLA in the form of films or fibers, that is, additional postprocessing steps. In this work, we are able to obtain PLA fibers with high macromolecular alignment, as demonstrated by SEM, and in the β polymorph, as detected by X-ray diffraction (XRD) without the requirement of post-processing. For that, PLA fibers were prepared by using an electrospinning coupled to a drum collector. This set up and the optimization of the parameters (voltage flow-rate, and drum collector speed) induced molecular stretching giving rise to uniaxially oriented and highly aligned fibers., This work was funded by the MICINN (MAT2017-88123-P, PID2019-104600RB-I00), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antibacterial Polymers Based on Poly(2-hydroxyethyl methacrylate) and Thiazolium Groups with Hydrolytically Labile Linkages Leading to Inactive and Low Cytotoxic Compounds

  • Cuervo-Rodríguez, Rocío
  • López-Fabal, Fátima
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
Herein, we develop a well-defined antibacterial polymer based on poly(2-hydroxyethyl methacrylate) (PHEMA) and a derivative of vitamin B1, easily degradable into inactive and bio- compatible compounds. Hence, thiazole moiety was attached to HEMA monomer through a car- bonate pH-sensitive linkage and the resulting monomer was polymerized via reversible addition- fragmentation chain transfer (RAFT) polymerization. N-alkylation reaction of the thiazole groups leads to cationic polymer with thiazolium groups. This polymer exhibits excellent antibacterial activity against methicillin-resistant Staphylococcus aureus (MRSA) with an MIC value of 78 μg mL−1, whereas its degradation product, thiazolium small molecule, was found to be inactive. Hemotoxicity studies confirm the negligible cytotoxicity of the degradation product in comparison with the original antibacterial polymer. The degradation of the polymer at physiological pH was found to be progres- sive and slow, thus the cationic polymer is expected to maintain its antibacterial characteristics at physiological conditions for a relative long period of time before its degradation. This degradation minimizes antimicrobial pollution in the environment and side effects in the body after eradicating bacterial infection., This work was funded by the MICINN (PID2019-104600RB-I00), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enzymatic Synthesis of Polyesters and Their Bioapplications: Recent Advances and Perspectives

  • Hevilla, Víctor
  • Sonseca, Águeda
  • Echeverría, Coro
This article reviews the most important advances in the enzymatic synthesis of polyesters. In first place, the different processes of polyester enzymatic synthesis, i.e., polycondensation, ring opening, and chemoenzymatic polymerizations, and the key parameters affecting these reactions, such as enzyme, concentration, solvent, or temperature, are analyzed. Then, the latest articles on the preparation of polyesters either by direct synthesis or via modification are commented. Finally, the main bioapplications of enzymatically obtained polyesters, i.e., antimicrobial, drug delivery, or tissue engineering, are described. It is intended to point out the great advantages that enzymatic polymerization present to obtain polymers and the disadvantages found to develop applied materials., This work was funded by the MICINN (PID2019-104600RB-I00), the Agen- cia Estatal de Investigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU). A.S. acknowledges her “PAID-10-19” postdoctoral contract from the Polytechnic University of Valencia.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chitin Nanocrystals: Environmentally Friendly Materials for the Development of Bioactive Films

  • Muñoz-Núñez, Carolina
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
Biobased nanomaterials have gained growing interest in recent years for the sustainable development of composite films and coatings, providing new opportunities and high-performance products. In particular, chitin and cellulose nanocrystals offer an attractive combination of properties, including a rod shape, dispersibility, outstanding surface properties, and mechanical and barrier properties, which make these nanomaterials excellent candidates for sustainable reinforcing materials. Until now, most of the research has been focused on cellulose nanomaterials; however, in the last few years, chitin nanocrystals (ChNCs) have gained more interest, especially for biomedical applications. Due to their biological properties, such as high biocompatibility, biodegradability, and antibacterial and antioxidant properties, as well as their superior adhesive properties and promotion of cell proliferation, chitin nanocrystals have emerged as valuable components of composite biomaterials and bioactive materials. This review attempts to provide an overview of the use of chitin nanocrystals for the development of bioactive composite films in biomedical and packaging systems., This work was funded by the MICINN (PID2019-104600RB-I00), the Spanish State Re- search Agency (AEI, Spain), and the European Regional Development Fund). C. Muñoz-Núñez acknowledges MICINN for his FPI fellowship: PRE2020-09359
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Direct 3D printing of zero valent iron@polylactic acid catalyst for tetracycline degradation with magnetically inducing active persulfate

  • Fernández-Velayos, S.
  • Sánchez-Marcos, J.
  • Muñoz-Bonilla, Alexandra
  • Herrasti, P.
  • Menéndez, N.
  • Mazarío, Eva
Catalyst stability has become a challenging issue for advanced oxidation processes (AOPs). Herein, we report an alternative method based on 3D printing technology to obtain zero-valent iron polylactic acid prototypes (ZVI@PLA) in a single step and without post etching treatment. ZVI@PLA was used to activate persulfate (PS) for the removal of Tetracycline (TC) in recirculating mode under two different heating methodologies, thermal bath and contactless heating promoted by magnetic induction (MIH). The effect of both heating methodologies was systematically analysed by comparing the kinetic constant of the degradation processes. It was demonstrated that the non-contact heating of ZVI by MIH reactivates the surface of the catalyst, renewing the surface iron content exposed to the pollutant solution, which makes the ZVI@PLA catalyst reusable up to 10 cycles with no efficiency reduction. In contrast, by using a conventional thermal bath, the kinetic constant gradually decreases over the 10 cycles, because of the superficial iron consumption, being the kinetic constant 5 times lower in the 10th run compared to MIH experiment. X-ray diffraction and Mössbauer spectroscopy confirmed the presence of metallic iron embedded in the ZVI@PLA prototype, whose crystalline structure remained unchanged for 10th cycles of MIH. Moreover, it was proven that with no contact heating technology at low magnetic fields (12.2 mT), the solution temperature does not increase, but only the surface of the catalyst does. Under these superficial heated conditions, kinetic rate is increased up to 0.016 min compared to the value of 0.0086 min obtained for conventional heating at 20 °C. This increase is explained not only by PS activation by iron leaching but also by the contribution of ZVI in the heterogeneous activation of persulfate., This research was funded by the Madrid Government (Comunidad de Madrid-Spain) under the Multiannual Agreement with Universidad Autónoma de Madrid in the line of action encouraging youth research doctors, in the context of the V PRICIT (Regional Programme of Research and Technological Innovation), (SI1-PJI-2019-00366) and by the Spanish Ministry of Science, innovation, and Universities under projects PGC2018-095642-B-I00 and PID2019-104600RB-I00
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antibacterial and compostable polymers derived from biobased itaconic acid as environmentally friendly additives for biopolymers

  • Chiloeches, Alberto
  • Cuervo-Rodríguez, Rocío
  • López-Fabal, Fátima
  • Fernández-García, Marta
  • Echeverría, Coro
  • Muñoz-Bonilla, Alexandra
In this work, a series of antibacterial cationic copolymers derived from bio-sourced itaconic acid was studied as potential biobased active components in biodegradable formulations based on poly(butylene adipate-co-terephthalate) (PBAT) for packaging applications. These copolymers were first characterized by testing their antimicrobial activity against resistant bacterial strains, their biodegradability in compost conditions, and their thermal properties by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The antibacterial properties showed potent activity against Methicillin-resistant Staphylococcus aureus (MRSA), with MIC values as low as 78 μg mL. Related to their biodegradability, the cationic polymers biodegraded fast under compost conditions and even a priming effect was observed in the compost. Thermal properties, characterized by DSC and TGA, showed that the copolymers thermally degraded at temperature relatively low; nevertheless, they are able to be processed at temperatures up to ∼150 °C. Subsequently, these antibacterial polymers were successfully blended as minor active component (10 wt%) with PBAT by melt-extrusion and press-compression molding. The resulting biopolymeric films exhibit potent antibacterial activity, which confirm that the cationic polymers incorporated as active component are able to perverse this activity after the processing and impart antibacterial properties to PBAT bioplastic. Therefore, these antibacterial biobased polymers derived from itaconic acid seem to be good candidates for applications related to active food packaging or even for biomedical devices., This work was funded by the MICINN (PID2019-104600RB-I00), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by CSIC (LINKA20364). A. Chi- loeches acknowledges MICIU for his FPU fellowship FPU18/0177
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Amylose Modified Starches as Superabsorbent Systems for Release of Potassium Fertilizers

  • León, Orietta
  • Soto, Diana
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
High-amylose maize starch (AS) was modified by graft copolymerization with sodium acid maleate and disodium maleate, using the KMnO-NaHSO redox system, and covalently crosslinked with N,N'-bismethylene acrylamide in inverse suspension polymerization process. The resulting modified starches were evaluated as absorbent materials for release fertilizers. Firstly, AS was obtained by leaching from native maize starch and posterior precipitation in ethanol. The gelatinized AS, comonomers, redox pair and crosslinker were dissolved in distilled water, which was used as dispersed phase; while paraffin oil was used as the continuous phase and sorbitan esters as stabilizers. In the reacions, parameters such as the AS amount of 10 wt%/v with respect to the dispersed phase; the degree of neutralization of maleic acid of 80%; the ratio [NaHSO]/[KMnO] of 2.6; the ratio between crosslinker and comonomers of 8.9 × 10; the stirring speed of 250 rpm; the reaction temperature at 60 °C; and a reaction time of 3 h, were kept constant. All the resulting amylose modified starches were characterized by potenciometric titration, X-ray diffraction and scanning electronic microscopy. The absorption capacity of these materials was studied by analyzing their swelling in various media and different pHs. Finally, the amylose modified starches were evaluated as systems for release fertilizers by measuring the loaded and released amount of fertilizer by gravimetry and conductimetry, respectively., This work was funded by the MICINN (PID2019-104600RB-I00), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Glycerol-based enzymatically synthesized renewable polyesters: Control of molecular weight, degree of branching and functional endgroups

  • Sonseca, Águeda
  • Hevilla, Víctor
  • López García, Daniel
  • Giménez, Enrique
  • Fernández-García, Marta
The catalytic specificity of Lipase B from Candida antarctica (CALB) has been exploited to achieve specific terminal groups for the synthesis of glycerol poly(ester)s. This permits the preparation of glycerol-derived macromers able to undergo further reactions/chemical modifications for customization as functional systems and building blocks for polymer synthesis. Poly(glycerol adipate) based macromers with different terminal structures were achieved from the reaction between glycerol and divinyl adipate by varying the stoichiometry (from equimolar to 1.5 and 3.0 excess either of glycerol or divinyl adipate) and amount of catalyst (1 and 3 wt%). In the course of polymerization, transesterification and hydrolysis reactions occur over vinyl functionalities that result in acid endgroups. Thus, the resulting macromers are either terminated with hydroxyl groups and/or acid groups and/or vinyl groups. Therefore, an understanding of how acid functionality appears (from vinyl groups hydrolysis) and its quantification under various conditions may provide an opportunity for the design of synthetic strategies to avoid acid production and obtain the desired structures. Endgroup analysis was carried out using H NMR and C NMR spectroscopies and MALDI-TOF spectrometry. Mainly linear hydroxyl and vinyl-terminated macromers were obtained with high efficiency without significant hydrolysis of the chain ends (for vinyl terminated)., This work was funded by the GVA (GV/2021/182), the MICINN (PID2019-104600RB-100), the Agencia Estatal de Investigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU). A. S. acknowledges her “APOSTD/2018/228” and “PAID-10-19” postdoctoral contracts from Culture and Sport Council from the Government of Valencia and from the Polytechnic University of Valencia, respectivel
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Electrospun Polylactic Acid-Based Fibers Loaded with Multifunctional Antibacterial Biobased Polymers

  • Chiloeches, Alberto
  • Cuervo-Rodríguez, Rocío
  • Gil-Romero, Y.
  • Fernández-García, Marta
  • Echeverría, Coro
  • Muñoz-Bonilla, Alexandra
Here, we report the development of antibacterial and compostable electrospun polylactic acid (PLA) fibers by incorporation of a multifunctional biobased polymer in the process. The multifunctional polymer was synthesized from the bio-sourced itaconic acid building block by radical polymerization followed by click chemistry reaction with hydantoin groups. The resulting polymer possesses triazole and hydantoin groups available for further N-alkylation and chlorination reaction, which provide antibacterial activity. This polymer was added to the electrospinning PLA solution at 10 wt %, and fiber mats were successfully prepared. The obtained fibers were surface-modified through the accessible functional groups, leading to the corresponding cationic triazolium and N-halamine groups. The fibers with both antibacterial functionalities demonstrated high antibacterial activity against Gram-positive and Gram-negative bacteria. While the fibers with cationic surface groups are only effective against Gram-positive bacteria (Staphylococcus epidermidis and Staphylococcus aureus), upon chlorination, the activity against Gram-negative Escherichia coli and Pseudomonas aeruginosa is significantly improved. In addition, the compostability of the electrospun fibers was tested under industrial composting conditions, showing that the incorporation of the antibacterial polymer does not impede the disintegrability of the material. Overall, this study demonstrates the feasibility of this biobased multifunctional polymer as an antibacterial agent for biodegradable polymeric materials with potential application in medical uses., This work was funded by the MICINN (PID2019-104600RBI00), Agencia Estatal de Investigación (AEI, Spain), Fondo Europeo de Desarrollo Regional (FEDER, EU), and CSIC (LINKA20364). A.C. acknowledges MICIU for his FPU fellowship FPU18/01776.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The Incorporation of Low-Molecular Weight Poly(Mannitol Sebacate)s on PLA Electrospun Fibers: Effects on the Mechanical Properties and Surface Chemistry

  • Hevilla, Víctor
  • Sonseca, Águeda
  • Giménez, Enrique
  • Echeverría, Coro
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
We offer a report on the synthesis of low-molecular weight biobased poly(mannitol sebacate) (PMS) and its functionalization with acrylate groups (PMSAc). These synthesized polyesters were blended at a low level (10 wt%) with poly (lactic acid) PLA to prepare aligned fibers by electrospinning, coupled with a rotatory collector. The obtained fibers were extensively studied by Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and wide-angle X-ray diffraction (WAXS), employing synchrotron radiation. The incorporation of the PMSs on the PLA fibers did not significantly affect the fiber diameters, whereas the alignment was almost maintained. The crystallinity and thermal properties were also slightly modified with the addition of PMSs, and an increase in the degree of crystallinity and in the glass transition temperature of the blend compared to PLA was observed. Remarkably, the PLA/PMSs fibers were more ductile due to the elastomeric character of PMS, with higher values of elongation at break and tensile strengths, and a smaller Young modulus in comparison with the PLA fibers. These modifications of the properties were more noticeable in the case of the acrylated PMS, which also provided readily available functional groups at the surface for further chemical reactions, such as the Michael addition or crosslinking processes., This work was funded by the MICINN (project PID2019-104600RB-I00) and by the Valencian Autonomous Government, Generalitat Valenciana, GVA (GV/2021/182)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of thiazolium chitosan derivative with enhanced antimicrobial properties and its use as component of chitosan based films

  • Muñoz-Núñez, Carolina
  • Cuervo-Rodríguez, Rocío
  • Echeverría, Coro
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
In this work, chemical modification of chitosan using cationic thiazolium groups was investigated with the aim to improve water solubility and antimicrobial properties of chitosan. Enzymatic synthesis and ethyl-3-(3-dimethylaminopropyl) carbodiimide/N-hydroxysuccinimide (EDC/NHS) chemistry were employed to synthesize and attach to chitosan through the amine groups the molecule bearing thiazolium moieties, quaternized 4-(2-(4-methylthiazol-5-yl) ethoxy)-4-oxobutanoic acid (MTBAQ). On the basis of Fourier transform infrared spectroscopy (FTIR), elemental analysis and solid state nuclear magnetic resonance (ssNMR), around 95 % of the available amine groups of chitosan (of 25 % degree of acetylation) reacted. The resulting derivative was water soluble at physiological pH and exhibit excellent antimicrobial activity against Listeria innocua, Staphylococcus epidermidis, Staphylococcus aureus and Methicillin Resistant S. aureus Gram-positive bacteria (MIC = 8–32 μg/ mL), whereas its efficiency decreases against fungi Candida albicans and Eschericia coli Gram-negative bacterium. Subsequently, the thiazolium chitosan derivative was employed as antimicrobial component (up to 7 wt%) of chitosan/glycerol based films. The incorporation of the chitosan derivative does not modify significantly the characteristics of the film in terms of thermal and mechanical properties, while enhances considerably the antimicrobial activity., This work was funded by the MICINN (PID2019-104600RB-I00), the Agencia Estatal de Investigacion ´ (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU). C. Munoz-Nu ˜ nez ˜ also acknowledges MICINN for her FPI fellowship PRE2020-093596. Authors thanks V. Hevilla for his help with enzymatic synthesis., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrolytic Degradation and Bioactivity of Electrospun PCL-Mg-NPs Fibrous Mats

  • Salaris, Valentina
  • López García, Daniel
  • Kenny, José María
  • Peponi, Laura
In this work, the in vitro degradation behavior of nanofibers was investigated in phosphate buffer solution (PBS) and simulated body fluid (SBF) to study their degradation behavior, as well as their bioactivity. The degradation was studied at different immersion times in order to evaluate how the presence of Mg-based nanoparticles can affect the degradation in terms of morphology, crystallinity, degradation rate and pH changes, and finally to evaluate the bioactivity of PCL-based electrospun nanofibers. We found that the degradation of the materials takes more than 3 months; however, the presence of nanoparticles seems to have an accelerating effect on the degradation of the electrospun nanofibers based on PCL. In fact, a reduction in diameter of almost 50% was observed with the highest content of both types of nanoparticles and an increase in crystallinity after 296 days of immersion in PBS. Moreover, the carbonyl index was calculated from an FTIR analysis, and a reduction of 20–30% was observed due to the degradation effect. Additionally, the bioactivity of PCL-based electrospun nanofibers was studied and the formation of crystals on the nanofibers surface was detected, except for neat electrospun PCL related to the formation of NaCl and apatites, depending on the amount and type of nanoparticles. The presence of apatites was confirmed by an XRD analysis and FT-IR analysis observing the characteristic peaks; furthermore, the EDX analysis demonstrated the formation of apatites than can be reconducted to the presence of HA when 20 wt% of nanoparticles is added to the PCL electrospun fibers., Financial support from the Spanish Ministry of Science and Innovation (MICINN) through PID2021-123753NB-C31, PID2019-104600RB-I00 and TED2021-129335B-C21 is greatly acknowledged
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photocured poly(Mannitol Sebacate) with functional methacrylic monomer: Analysis of physical, chemical, and biological properties

  • Hevilla, Víctor
  • Sonseca, Águeda
  • Echeverría, Coro
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
In this work, we described the formation of polymeric networks with potential antimicrobial character based on an acrylate oligomer, poly(mannitol sebacate) (PMS), and an enzymatically synthesized methacrylic monomer with thiazole groups (MTA). Networks with different content of MTA were prepared, and further physico-chemically characterized by microhardness, water contact angle measurements, and differential scanning calorimetry. Monomer incorporation into the networks and subsequent quaternization to provide thiazolium moieties affected the mechanical behavior and the surface wettability of the networks. Moreover, the introduction of permanent cationic charges in the network surface could give antimicrobial activity to them. Therefore, the antibacterial behavior and the hemotoxicity were analyzed against Gram-positive and Gram-negative bacteria and red blood cells, respectively., This work was funded by the Ministerio de Ciencia e Innovación (project PID2019-104600RB-I00), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by the Valencian Autonomous Government, Generalitat Valenciana, GVA (GV/2021/182)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antimicrobial Activity and Crystallization Features in Bio-Based Composites of PLLA and MCM-41 Particles Either Pristine or Functionalized with Confined Ag Nanowires

  • Díez-Rodríguez, Tamara M.
  • Blázquez-Blázquez, Enrique
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
  • Pérez, Ernesto
  • Cerrada, María L.
Composites based on an L-rich poly(lactic acid) (PLLA) and MCM-41, either neat or modified with a silver (MCM-41@Ag), are achieved by solvent casting, being next processed by compression molding. Ag is mainly embedded as nanowires within the hybrid MCM-41@Ag particles, enabling its antimicrobial character. In these composites, the PLLA thermal stability, nucleation efficiency, and mechanical response are dependent on the MCM-41 nature and, to a lesser extent, on its content. Thus, differences in transitions of the PLLA matrix are noticed during cooling at 10 °C/min and in the subsequent heating when composites with neat or modified MCM-41 are compared. A very remarkable nucleation effect is played by pristine MCM-41, being inferior when MCM-41@Ag is incorporated into the PLLA. Wide angle X-ray scattering (WAXS) measurements using synchrotron radiation and performed under variable-temperature conditions in the composites containing MCM-41@Ag indicate that during cold crystallization, the disordered α′ polymorph is initially formed, but it rapidly transforms into ordered α crystals. A long spacing peak, clearly seen in pure PLLA, appears as a small shoulder in PLLAMCM@Ag4 and is undetectable in PLLAMCM@Ag9 and PLLAMCM@Ag20. Furthermore, an increase in MH with the silica content is found in the two sets of composites, the higher MH values being observed in the family of PLLA and MCM-41@Ag. Finally, remarkable antimicrobial features are noticeable in the composites with MCM-41@Ag since this modified silica transfers its biocidal characteristics into the PLLA composites., This research was funded by MCIN/AEI/10.13039/501100011033, grants number PID2020-114930GB-I00 and PID2019-104600RB-I00. The authors also acknowledge the support received from ALBA Synchrotron Light Facility., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Biocidal mesoporous SBA-15 particles decorated with Ag nanowires: Nucleant role in PLLA crystallization and antimicrobial transfer of their activity to the resultant biobased PLLA-SBA15@Ag composites

  • Díez-Rodríguez, Tamara M.
  • Blázquez-Blázquez, Enrique
  • Fernández-García, Marta
  • Muñoz-Bonilla, Alexandra
  • Pérez, Ernesto
  • Cerrada, María L.
Different composites based on an L-rich poly(lactic acid) (PLLA) and mesoporous SBA-15 functionalized with silver (SBA-15@Ag) are prepared by a solvent casting protocol, and subsequently processed as films by compression molding. Characterization of hybrid SBA-15@Ag particles shows that Ag is mainly incorporated as nanowires within the nanometric silica channels, and is able to provide its antimicrobial character to these hybrid particles. PLLA crystallinity, crystallization ability and the polymorphs able to be developed are strongly dependent on cooling rate and in less extent on silica content. These hybrid particles exert an important nucleating and reinforcing effect in the resultant composites. They also show very interesting and remarkable antimicrobial features, which are transferred to the PLLA composites. The most important antimicrobial activity is found against P. aeruginosa, E. coli and C. parapsilosis, Gram negative bacteria and yeast, respectively., Grants PID2020-114930 GB-I00 and PID2019-104600RB-I00 were funded by MCIN/AEI/10.13039/501100011033. Authors acknowledge this support together with that received from ALBA Synchrotron Light Facility. Grant BES-2017-082284 was also funded by MCIN/AEI/ 10.13039/501100011033 and, thus, TMDR is also thankful for her predoctoral funding. The synchrotron experiments were carried out in the beamline BL11-NCD-SWEET at ALBA Synchrotron Light Facility with the collaboration of ALBA staff., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Photocuring of aliphatic-lineal poly(glycerol adipate) with a monomer bearing thiazolium groups as a promising approach for biomedical applications

  • Hevilla, Víctor
  • Sonseca, Águeda
  • Echeverría, Coro
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
In this work, we described the combination of photocurable methacrylic monomer and poly(glycerol adipate) (PGA) macromer to form networks that can be further quaternized to provide antimicrobial character. Both monomers were synthesized enzymatically. Networks with different content of methacrylic monomer were prepared and further characterized by water contact angle measurements, surface charge, soluble fractions, differential scanning calorimetry and microhardness to determine the effect of the methacrylic monomer in the PGA network. Methacrylic monomer affected the mechanical behavior but did not alter the surface wettability, whereas the quaternization did not alter the wettability nor the mechanical properties of the network surfaces. Finally, the obtained network with the introduced permanent cationic charges were tested against Gram-positive S. aureus and Gram-negative E. coli bacteria showing remarkable antimicrobial activity which increased with the content of methacrylic monomer in the network. Moreover, the assays against red blood cells demonstrated that networks are no toxic., This work was funded by the MICINN (project PID2019-104600RB-I00), the Agencia Estatal de Investigacion ´ (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by the Valencian Autonomous Government, Generalitat Valenciana, GVA (GV/2021/182)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

PLA and PBAT-Based Electrospun Fibers Functionalized with Antibacterial Bio-Based Polymers

  • Chiloeches, Alberto
  • Fernández-García, R.
  • Fernández-García, Marta
  • Mariano, A. P.
  • Bigioni, I.
  • Scotto d’Abusco, A.
  • Echeverría, Coro
  • Muñoz-Bonilla, Alexandra
Antimicrobial fibers based on biodegradable polymers, poly(lactic acid) (PLA),and poly(butylene adipate-co-terephthalate) (PBAT) are prepared byelectrospinning. For this purpose, a biodegradable/bio-based polyitaconatecontaining azoles groups (PTTI) is incorporated at 10 wt.% into theelectrospinning formulations. The resulting fibers functionalized with azolemoieties are uniform and free of beads. Then, the accessible azole groups aresubjected toN-alkylation, treatment that provides cationic azolium groupswith antibacterial activity at the surface of fibers. The positive charge density,roughness, and wettability of the cationic fibers are evaluated and comparedwith flat films. It is confirmed that these parameters exert an important effecton the antimicrobial properties, as well as the length of the alkylating agentand the hydrophobicity of the matrix. The quaternized PLA/PTTI fibers exhibitthe highest efficiency against the tested bacteria, yielding a 4-Log reductionagainstS. aureusand 1.7-Log against MRSA. Then, biocompatibility andbioactivity of the fibers are evaluated in terms of adhesion, morphology andviability of fibroblasts. The results show no cytotoxic effect of the samples,however, a cytostatic effect is appreciated, which is ascribed to the strongelectrostatic interactions between the positive charge at the fiber surface andthe negative charge of the cell membranes, This work was funded by the MICINN (PID2019-104600RB-I00), the Agen-cia Estatal de Investigación (AEI, Spain) and Fondo Europeo de DesarrolloRegional (FEDER, EU) and by CSIC (LINKA20364). A.C. acknowledges MI-CIU for his FPU fellowship FPU18/01776. The negativ exponents were cor-rected on January 16, 2023
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Centrifugal Force-Spinning to Obtain Multifunctional Fibers of PLA Reinforced with Functionalized Silver Nanoparticles

  • Martín-Alonso, María Dolores
  • Salaris, Valentina
  • Leonés, Adrián
  • Hevilla, Víctor
  • Muñoz-Bonilla, Alexandra
  • Echeverría, Coro
  • Fernández-García, Marta
  • Peponi, Laura
  • López García, Daniel
The design and development of multifunctional fibers awakened great interest in biomaterials and food packaging materials. One way to achieve these materials is by incorporating functionalized nanoparticles into matrices obtained by spinning techniques. Here, a procedure for obtaining functionalized silver nanoparticles through a green protocol, using chitosan as a reducing agent, was implemented. These nanoparticles were incorporated into PLA solutions to study the production of multifunctional polymeric fibers by centrifugal force-spinning. Multifunctional PLA-based microfibers were obtained with nanoparticle concentrations varying from 0 to 3.5 wt%. The effect of the incorporation of nanoparticles and the method of preparation of the fibers on the morphology, thermomechanical properties, biodisintegration, and antimicrobial behavior, was investigated. The best balance in terms of thermomechanical behavior was obtained for the lowest amount of nanoparticles, that is 1 wt%. Furthermore, functionalized silver nanoparticles confer antibacterial activity to the PLA fibers, with a percentage of killing bacteria between 65 and 90%. All the samples turned out to be disintegrable under composting conditions. Additionally, the suitability of the centrifugal force-spinning technique for producing shape-memory fiber mats was tested. Results demonstrate that with 2 wt% of nanoparticles a good thermally activated shape-memory effect, with high values of fixity and recovery ratios, is obtained. The results obtained show interesting properties of the nanocomposites to be applied as biomaterials., This research was funded by the Agencia Estatal de Investigación (AEI, MICINN, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU), PID2021-123753NB-C31, PID2019-104600RBI00, and TED2021-129335B-C21, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Straightforward Enzymatic Methacrylation of Poly(Glycerol Adipate) for Potential Applications as UV Curing Systems

  • Hevilla, Víctor
  • Sonseca, Águeda
  • Fernández-García, Marta
Enzymatic one-pot synthesis procedures in a one-step and two-step monomers addition were developed to obtain poly(glycerol adipate) macromers with methacrylate end-functional groups under the presence of 1 and 3 wt% of Candida antarctica lipase B (CALB). Glycerol, divinyl adipate, and vinyl methacrylate were enzymatically reacted (vinyl methacrylate was either present from the beginning in the monomers solution or slowly dropped after 6 h of reaction) in tetrahydrofuran (THF) at 40 °C over 48 h. Macromers with a methacrylate end groups fraction of ≈52% in a simple one-pot one-step procedure were obtained with molecular weights (Mn) of ≈7500–7900 g/mol. The obtained products under the one-pot one-step and two steps synthesis procedures carried out using 1 and 3 wt% of a CALB enzymatic catalyst were profusely characterized by NMR (1H and 13C), MALDI-TOF MS, and SEC. The methacrylate functional macromers obtained with the different procedures and 1 wt% of CALB were combined with an Irgacure® 369 initiator to undergo homopolymerization under UV irradiation for 10 and 30 min, in order to test their potential to obtain amorphous networks within minutes with similar properties to those typically obtained by complex acrylation/methacrylation procedures, which need multiple purification steps and harsh reagents such as acyl chlorides. To the best of our knowledge, this is the first time that it has been demonstrated that the obtention of methacrylate-functional predominantly linear macromers based on poly(glycerol adipate) is able to be UV crosslinked in a simple one-step procedure., This work was funded by the Ministerio de Ciencia e Innovación (project PID2019-104600RB-I00), the Agencia Estatal de Investigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by the Valencian Autonomous Government, Generalitat Valenciana, GVA (GV/2021/182)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synergistic Combination of Antimicrobial Peptides and Cationic Polyitaconates in Multifunctional PLA Fibers

  • Chiloeches, Alberto
  • Zágora, J.
  • Plachá, D.
  • Torres, M. D. T.
  • Fuente-Nunez, C. de la
  • López-Fabal, F.
  • Gil-Romero, Y.
  • Fernández-García, R.
  • Fernández-García, Marta
  • Echeverría, Coro
  • Muñoz-Bonilla, Alexandra
Combining different antimicrobial agents has emerged as a promising strategy to enhance efficacy and address resistance evolution. In this study, we investigated the synergistic antimicrobial effect of a cationic biobased polymer and the antimicrobial peptide (AMP) temporin L, with the goal of developing multifunctional electrospun fibers for potential biomedical applications, particularly in wound dressing. A clickable polymer with pendent alkyne groups was synthesized by using a biobased itaconic acid building block. Subsequently, the polymer was functionalized through click chemistry with thiazolium groups derived from vitamin B1 (PTTIQ), as well as a combination of thiazolium and AMP temporin L, resulting in a conjugate polymer-peptide (PTTIQ-AMP). The individual and combined effects of the cationic PTTIQ, Temporin L, and PTTIQ-AMP were evaluated against Gram-positive and Gram-negative bacteria as well as Candida species. The results demonstrated that most combinations exhibited an indifferent effect, whereas the covalently conjugated PTTIQ-AMP displayed an antagonistic effect, potentially attributed to the aggregation process. Both antimicrobial compounds, PTTIQ and temporin L, were incorporated into poly(lactic acid) electrospun fibers using the supercritical solvent impregnation method. This approach yielded fibers with improved antibacterial performance, as a result of the potent activity exerted by the AMP and the nonleaching nature of the cationic polymer, thereby enhancing long-term effectiveness., This work was funded by the MICINN (PID2019-104600RB- I00 and PID2021-123553OA-I00), the Agencia Estatal de Investigación (AEI, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by CSIC (LINKA20364). A. Chiloeches acknowledges MICIU for his FPU fellowship FPU18/01776. Cesar de la Fuente-Nunez holds a Presidential Professorship at the University of Pennsylvania and acknowl- edges funding from the Procter & Gamble Company, United Therapeutics, a BBRF Young Investigator Grant, the Nemirovsky Prize, Penn Health-Tech Accelerator Award, and the Dean’s Innovation Fund from the Perelman School of Medicine at the University of Pennsylvania. Research reported in this publication was supported by the Langer Prize (AIChE Foundation), the National Institute of General Medical Sciences of the National Institutes of Health under award number R35GM138201, and the Defense Threat Reduction Agency (DTRA; HDTRA11810041, HDTRA1-21-1-0014, and HDTRA1-23-1-0001). D. Placha and J. Zagora acknowledge the Doctoral grant competition VSB-Technical University of Ostrava (reg. no. CZ.02.2.69/0.0/0.0/19_073/0016945) with- in the Operational Programme Research, Development and Education, under project DGS/INDIVIDUAL/2020-001 “Development of antimicrobial biobased polymeric material using supercritical fluid technology”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of cellulose derivatives for enhanced antimicrobial activity

  • Echeverría, Coro
  • Arnaldos-Pérez, Irene
  • Barranco, Rosa
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
The need for biodegradable materials has driven the exploration of natural and biobased polymers, with cellulose emerging as a promising option due to its abundance and environmental sustainability. However, cellulose lacks inherent antimicrobial activity, prompting researchers to explore various strategies. In this work, the permanent covalent chemical modification of microcrystalline cellulose with 1-methylimidazole is reported to provide cellulose with antimicrobial properties. The modifications were confirmed using solid-state C-NMR and Fourier Transform Infrared (FT-IR) spectroscopies. The analysis from C-NMR and elemental analysis also confirmed the successful of the chemical modification occurred at C6 after chlorination with an estimated degree of substitution of 17%. The surface charge density of this cellulosic derivative was determined using ζ potential measurements, which confirmed its cationization. The crystalline and thermal properties of the resulting cellulose derivative were evaluated using X-ray diffraction and thermogravimetric analysis (TGA), respectively. Finally, the antimicrobial activity of the obtained cationic cellulose was assessed against both Gram-positive (Staphylococcus epidermidis) and Gram-negative (Pseudomona aeruginosa) bacteria, giving a reduction of > 99.99% and 99.6%, respectively., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. We acknowl- edge grants PID2021-123553OA-I00 and PID2019-104600RB- I00 funded by MCIN, the Agencia Estatal de Investigación (AEI) and ERDF A way of making Europe. We also acknowl- edge CSIC Interdisciplinary Thematic Platform Salud Global + for financial support. I.A. acknowledges CSIC for the JAE Intro grant (JAEINT_21_02321). R.B acknowledges for her “Juan de la Cierva” contract (FJC2021-046585-I) funded by MCIN/AEI/101.13039/501100011033 and the European Union “NextGenerationEU”/PRTR and C.E. acknowledges CSIC for the incorporation project 202260I149.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Functionalization of chitosan films using essential oils by supercritical CO2 impregnation method for various applications

  • Muñoz-Núñez, Carolina
  • Hevilla, Víctor
  • Blázquez-Blázquez, Enrique
  • Zagora, Jakub
  • Placha, Daniela
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
Herein, chitosan films obtained by different approaches were functionalized with essential oils, i.e. mentha, clove, and cinnamon, by Supercritical Solvent Impregnation method to impart antioxidant and antimicrobial activity. The films were prepared from solutions with two different polymer concentrations (1 and 2.5 wt%) following three methodologies: casting and then drying at air (25 ◦C, 39 % relative humidity), casting and drying at 60 ◦C in humid conditions (82 % relativity humidity) and casting and water elimination by a freeze-drying process. The films were, then, characterized by scanning electron microscopy and X-ray diffraction, proving that the thickness, porosity, and crystallinity of the films are highly dependent on the preparation method. These structural variations affected the impregnation of essential oils by supercritical fluids, in terms of the amount and composition of the active compounds. Subsequently, yellowness, antioxidant and antimicrobial properties of the impregnated films were evaluated. The results demonstrated that the impregnated films retained high concen- tration of essential oils, especially the films impregnated with clove and produced by the freeze-drying process due to their higher porosity and lower crystallinity. These films also exhibited superior antimicrobial activity against Gram-positive and Gram-negative bacteria in comparison with the other two analyzed preparation methods., This work was funded by the MICINN (PID2019-104600RB-I00 and PID2022-136516OB-I00), the Agencia Estatal de Investigación (AEI, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU) and by CSIC (LINKA20364). C. Muñoz-Nuñez acknowledges MICINN for her PRE2020-093596 fellowship. D. Placha and J. Zagora acknowledge to the Doctoral grant competition VSB-Technical University of Ostrava, reg. n◦. CZ.02.2.69/0.0/0.0/19_073/0016945 within the Operational Programme Research, Development and Education, under project DGS/ INDIVIDUAL/2020-001 “Development of antimicrobial biobased poly- meric material using supercritical fluid technology”. This work was also financially supported by the European Union under the REFRESH – Research Excellence for Region Sustainability and High-tech Industries project number CZ.10.03.01/00/22_003/0000048 via the Operational Programme Just Transition. This paper was created as part of the project No CZ.02.01.01/00/22_008/0004631 Materials and technologies for sustainable development within the Jan Amos Komensky Operational Program financed by the European Union and from the state budget of the Czech Republic.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Datos de investigación Set de datos (Dataset)

Research data supporting the publications of the BE-ACTIVE project: cationic cellulose and cellulose nanocrystal derivatives, biobased antimicrobial polymers and PLA-based materials (PID2021-123553OA-I00)

  • Echeverría, Coro
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
  • Barranco-García, Rosa
  • Chiloeches, Alberto
  • Arnaldos-Perez, Irene
  • Ayensa Serrano, Naroa
  • Cerrada, María L.
[METHODOLOGICAL INFORMATION] 1. Description of methods used for collection/generation of data: Folder 02. Microcrystalline cellulose (Avicel PH-101) was chlorinated with thionyl chloride in DMF (3 h, 85 C) to give 6-chloro-6-deoxycellulose (Cl-Cel), purified by precipitation in cold water, neutralization with ammonium hydroxide, dialysis (5 days) and lyophilization. Cl-Cel was reacted with 1-methylimidazole (24 h, 95 C) to yield the cationic cellulose MIm-Cel, purified by precipitation in cold methanol, vacuum drying at 45 C and dialysis (48 h). Folder 04. Cellulose nanocrystals were chlorinated and then modified by two routes: direct substitution with N-methylimidazole to obtain CNC-MI, and azidation followed by Cu(I)-catalyzed azide-alkyne cycloaddition with 1-methyl-3-propargyl imidazole (PMDTA/CuCl, DMSO, 40 C, 48 h) to obtain CNC-TrMI. Products were purified by dialysis and lyophilization. Folder 01. A clickable polymer with pendant alkyne groups was synthesized from biobased itaconic acid and functionalized by click chemistry with thiazolium groups derived from vitamin B1 (PTTIQ) and with the antimicrobial peptide temporin L (PTTIQ-AMP). Both antimicrobial agents were incorporated into electrospun poly(lactic acid) fibres by supercritical CO2 impregnation. Folder 03. Mixtures of two poly(lactic acid) matrices with two polymeric nucleating agents at several contents were prepared by extrusion, and films were processed from the melt under two thermal treatments: quenching (Q) and slow cooling (S)., 2. Methods for processing the data: Spectra, diffractograms and thermograms were exported from the instrument software as ASCII tables and converted to CSV without smoothing, scaling or baseline manipulation beyond the background subtraction described below; decimal separators were normalized to the dot and column headers were added with explicit units. FTIR spectra were recorded in transmission or ATR mode after acquiring a background spectrum before each sample. Crystallinity indices were calculated from the diffractograms as CI (%) = Ac/Atotal x 100, where Ac is the integrated area of the crystalline peaks and Atotal the total integrated area. Degrees of substitution were calculated from the C, H, N and S contents obtained by elemental analysis., 3. Instrument- or software-specific information needed to interpret/reproduce the data: - Solid-state 13C NMR: Bruker Avance 400WB, wide-bore magnet (89 mm), 9.4 T, 400.14 MHz for 1H and 100 MHz for 13C, 296.5 K, acquisition time 0.05 s, 2000 scans. - FTIR: PerkinElmer Spectrum Two, transmission mode, KBr pellets (1 wt% sample), 400-4000 cm-1, resolution 4 cm-1. The ATR spectra of folder 03 were recorded on the same instrument with an ATR accessory. - Elemental analysis: LECO CNHS932 elemental microanalyzer (C, H, N, S). - X-ray diffraction: Bruker D8 Advance, Cu K-alpha radiation. Folder 02: lambda = 1.54 A, 2theta = 4-60 degrees, step 0.024 degrees, 0.5 s per step. Folder 04: Bragg-Brentano reflection geometry, Ni-filtered Cu K-alpha (lambda = 1.5418 A), Vantec1 detector, silicon zero-background holder, 2theta = 4-60 degrees, step 0.02 degrees, 0.2 s per step. - Thermogravimetric analysis: TA Instruments Q500, 25-800 C (folder 02: up to 830 C), heating rate 10 C/min, nitrogen atmosphere. - Electron microscopy: Hitachi SU 8000 FE-SEM; for TEM imaging of nanocrystals, dispersions in acetone deposited on carbon-coated copper grids and dried at room temperature. - Differential scanning calorimetry and microhardness (folder 03):, 4. Standards and calibration information: Antibacterial assays of folder 04 followed standard ASTM E2149-20 (antimicrobial activity under dynamic contact conditions). Bacterial inocula were adjusted against the 0.5 McFarland turbidity standard, verified with a DEN-1 densitometer (Biosan). Reference strains were obtained from the American Type Culture Collection: Staphylococcus epidermidis ATCC 12228 and Pseudomonas aeruginosa ATCC 27853. Instruments of the ICTP-CSIC characterization services are calibrated periodically following the internal procedures of those services. Chemical nomenclature follows IUPAC recommendations and all magnitudes are expressed in SI units., 5. Environmental/experimental conditions: Synthesis: chlorination at 85 C for 3 h in DMF; reaction with 1-methylimidazole at 95 C for 24 h; click reaction at 40 C for 48 h in DMSO. Purification by dialysis and lyophilization or vacuum drying at 45 C. All samples were vacuum-dried before spectroscopic measurements. Antibacterial assays: 10 mg of sample in 10 mL of phosphate-buffered saline at a working concentration of about 1E5 CFU/mL, incubated at 37 C and 120 rpm for 24 h; plates incubated at 37 C for 24 h on 5% sheep blood Columbia agar, 6. Describe any quality-assurance procedures performed on the data: Antibacterial assays were performed in triplicate, with control experiments run in parallel using unmodified cellulose, the chlorinated intermediate and no material at all. A background spectrum was acquired before every FTIR measurement and all samples were vacuum-dried before analysis. NMR signal assignments were checked against literature values for analogous cellulose derivatives. All data included in this dataset underwent peer review as part of the four publications listed above., Grant PID2021-123553OA-I00 ("Generation of antimicrobial all-biobased electroactive polymers for biomedical applications", acronym BE-ACTIVE), funded by MICIU/AEI/10.13039/501100011033 and by ERDF/EU "A way of making Europe". Principal Investigator: Coro Echeverria (ICTP-CSIC). Part of the data in folders 01 and 03 was also supported by grants PID2019-104600RB-I00 and PID2022-136516OB-I00 (MICIU/AEI and ERDF), as acknowledged in the corresponding publications., Each top-level folder contains the data underlying one publication: 01 - Chiloeches, A.; Zagora, J.; Placha, D.; Torres, M. D. T.; de la Fuente-Nunez, C.;Lopez-Fabal, F.; Gil-Romero, Y.; Fernandez-Garcia, R.; Fernandez-Garcia, M.; Echeverria, C.;Munoz-Bonilla, A. "Synergistic combination of antimicrobial peptides and cationic polyitaconates in multifunctional PLA fibers". ACS Applied Bio Materials 6(11), 4805-4813 (2023). https://doi.org/10.1021/acsabm.3c00576; 02 - Echeverria, C.; Arnaldos-Perez, I.; Barranco, R.; Munoz-Bonilla, A.; Fernandez-Garcia, M. "Synthesis and characterization of cellulose derivatives for enhanced antimicrobial activity". Cellulose 31, 1729-1740 (2024). https://doi.org/10.1007/s10570-023-05655-1; 03 - Barranco-Garcia, R.; Munoz-Bonilla, A.; Cerrada, M. L.; Echeverria, C.; Fernandez-Garcia, M. "Phase transitions in mixtures based on poly(lactic acid) and two polymeric nucleantes processed under a fast or slow cooling from the melt". Journal of Thermal Analysis and Calorimetry 149, 6051-6062 (2024). https://doi.org/10.1007/s10973-024-13188-3; 04 - Echeverria, C.; Ayensa, N.; Barranco-Garcia, R.; Munoz-Bonilla, A.; Fernandez-Garcia, M. "Enhanced antimicrobial activity of cellulose nanocrystals with added triazole and imidazolium groups". Cellulose (2026). https://doi.org/10.1007/s10570-026-07162-5., Peer reviewed