Pasar al contenido principal

HACIA EL DISEÑO DE MATERIALES POLIMERICOS REFORZADOS “A LA CARTA” INTELIGENTES Y MULTIFUNCIONALES BASADOS EN LA ECONOMIA CIRCULAR MEDIANTE ELECTROHILADO E IMPRESION 3D

PID2021-123753NB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bio-Catalysis for the Functionalization of Cellulose Nanocrystals

  • Peponi, Laura
  • Kenny, José María
  • Barrera-Rivera, Karla A.
  • Marcos-Fernández, Ángel
  • Martínez-Richa, Antonio
  • López García, Daniel
In this work, the chemical modification of cellulose nanocrystals (NCs) using an enzyme as a catalyst has been performed by a “grafting from” reaction, in order to covalently functionalize the external surface of NCs with both poly(L-lactic acid) (PLLA) and poly(ε-caprolactone) (PCL) by ring-opening polymerization. Firstly, cellulose nanocrystals were prepared from commercial cellulose microcrystals by acid hydrolysis and then functionalized by using Yarrowia lipolytica lipase immobilized on Lewatit resin as a catalyst. To confirm the success of the grafting reactions, H-NMR has been performed as well as FT-IR and Raman spectroscopy. Moreover, thermogravimetric analysis has been used to determine the amount of polymeric chains grafted onto the surface of cellulose nanocrystals. Furthermore, the crystalline nature of the polymeric chains grafted onto the cellulose surface has been studied by DSC, X-ray scattering, as well as SAXS analysis. To our knowledge, it is the first time that a biocatalyst approach has been used to obtain biopolymeric functionalized cellulose nanocrystals., This research was funded by the Ministerio de Ciencia e Innovación (PID2021-123753NB-C31; PID2020-119047RB-I00).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Comparative Study on the Addition of MgO and Mg(OH)2 Nanoparticles into PCL Electrospun Fibers

  • Salaris, Valentina
  • Leonés, Adrián
  • López García, Daniel
  • Kenny, José María
  • Peponi, Laura
In this work, a comparative study between the morphology, the thermal and the mechanical properties of poly(ɛ-caprolactone) (PCL)-based electrospun fiber mats reinforced with both MgO and Mg(OH) nanoparticles, is carried out. Both MgO and Mg(OH) nanoparticles have been added in a range of concentrations such as 0.5, 1, 5, 10, 20 wt% with respect to the PCL matrix, with the aim of improving their mechanical properties in comparison with neat PCL electrospun fibers. From the morphological point of view, electrospun fibers are randomly collected and an increase in the average fiber diameter with the addition of nanoparticles is observed. The addition of both types of nanoparticles lower the onset degradation temperature as well as the maximum degradation temperature of neat ePCL of about 50 °C with the higher content of nanoparticles. Furthermore, PCL electrospun nanofiber mats show a degree of crystallinity of 53%, which is quite high. However, the addition of 20 wt% of both MgO and Mg(OH) lowers the crystallinity of the reinforced electrospun fibers to 50% and 43% for PCL + MgO 20 wt% and Mg(OH) 20 wt%, respectively., The authors gratefully thank the Spanish Ministry of Science and Innovation (MICINN) through PID2021-123753NB-C31 as well as CSIC for theJAEIntro fellowship, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hydrolytic Degradation and Bioactivity of Electrospun PCL-Mg-NPs Fibrous Mats

  • Salaris, Valentina
  • López García, Daniel
  • Kenny, José María
  • Peponi, Laura
In this work, the in vitro degradation behavior of nanofibers was investigated in phosphate buffer solution (PBS) and simulated body fluid (SBF) to study their degradation behavior, as well as their bioactivity. The degradation was studied at different immersion times in order to evaluate how the presence of Mg-based nanoparticles can affect the degradation in terms of morphology, crystallinity, degradation rate and pH changes, and finally to evaluate the bioactivity of PCL-based electrospun nanofibers. We found that the degradation of the materials takes more than 3 months; however, the presence of nanoparticles seems to have an accelerating effect on the degradation of the electrospun nanofibers based on PCL. In fact, a reduction in diameter of almost 50% was observed with the highest content of both types of nanoparticles and an increase in crystallinity after 296 days of immersion in PBS. Moreover, the carbonyl index was calculated from an FTIR analysis, and a reduction of 20–30% was observed due to the degradation effect. Additionally, the bioactivity of PCL-based electrospun nanofibers was studied and the formation of crystals on the nanofibers surface was detected, except for neat electrospun PCL related to the formation of NaCl and apatites, depending on the amount and type of nanoparticles. The presence of apatites was confirmed by an XRD analysis and FT-IR analysis observing the characteristic peaks; furthermore, the EDX analysis demonstrated the formation of apatites than can be reconducted to the presence of HA when 20 wt% of nanoparticles is added to the PCL electrospun fibers., Financial support from the Spanish Ministry of Science and Innovation (MICINN) through PID2021-123753NB-C31, PID2019-104600RB-I00 and TED2021-129335B-C21 is greatly acknowledged
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermal Properties and In Vitro Biodegradation of PLA-Mg Filaments for Fused Deposition Modeling

  • Leonés, Adrián
  • Salaris, Valentina
  • Ramos Aranda, Ignacio
  • Lieblich, Marcela
  • López García, Daniel
  • Peponi, Laura
Additive manufacturing, in particular the fused deposition method, is a quite new interesting technique used to obtain specific 3D objects by depositing layer after layer of material. Generally, commercial filaments can be used in 3D printing. However, the obtention of functional filaments is not so easy to reach. In this work, we obtain filaments based on poly(lactic acid), PLA, reinforced with different amounts of magnesium, Mg, microparticles, using a two-step extrusion process, in order to study how processing can affect the thermal degradation of the filaments; we additionally study their in vitro degradation, with a complete release of Mg microparticles after 84 days in phosphate buffer saline media. Therefore, considering that we want to obtain a functional filament for further 3D printing, the simpler the processing, the better the result in terms of a scalable approach. In our case, we obtain micro-composites via the double-extrusion process without degrading the materials, with good dispersion of the microparticles into the PLA matrix without any chemical or physical modification of the microparticles., This research was funded by the Agencia Estatal de Investigación (AEI, MICINN, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU), PID2021-123753NB-C31 and TED2021-129335B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Centrifugal Force-Spinning to Obtain Multifunctional Fibers of PLA Reinforced with Functionalized Silver Nanoparticles

  • Martín-Alonso, María Dolores
  • Salaris, Valentina
  • Leonés, Adrián
  • Hevilla, Víctor
  • Muñoz-Bonilla, Alexandra
  • Echeverría, Coro
  • Fernández-García, Marta
  • Peponi, Laura
  • López García, Daniel
The design and development of multifunctional fibers awakened great interest in biomaterials and food packaging materials. One way to achieve these materials is by incorporating functionalized nanoparticles into matrices obtained by spinning techniques. Here, a procedure for obtaining functionalized silver nanoparticles through a green protocol, using chitosan as a reducing agent, was implemented. These nanoparticles were incorporated into PLA solutions to study the production of multifunctional polymeric fibers by centrifugal force-spinning. Multifunctional PLA-based microfibers were obtained with nanoparticle concentrations varying from 0 to 3.5 wt%. The effect of the incorporation of nanoparticles and the method of preparation of the fibers on the morphology, thermomechanical properties, biodisintegration, and antimicrobial behavior, was investigated. The best balance in terms of thermomechanical behavior was obtained for the lowest amount of nanoparticles, that is 1 wt%. Furthermore, functionalized silver nanoparticles confer antibacterial activity to the PLA fibers, with a percentage of killing bacteria between 65 and 90%. All the samples turned out to be disintegrable under composting conditions. Additionally, the suitability of the centrifugal force-spinning technique for producing shape-memory fiber mats was tested. Results demonstrate that with 2 wt% of nanoparticles a good thermally activated shape-memory effect, with high values of fixity and recovery ratios, is obtained. The results obtained show interesting properties of the nanocomposites to be applied as biomaterials., This research was funded by the Agencia Estatal de Investigación (AEI, MICINN, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU), PID2021-123753NB-C31, PID2019-104600RBI00, and TED2021-129335B-C21, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Review on Reinforcements and Additives in Starch-Based Composites for Food Packaging

  • Muñoz-Gimena, Pedro Francisco
  • Oliver-Cuenca, Víctor
  • Peponi, Laura
  • López, Daniel
The research of starch as a matrix material for manufacturing biodegradable films has been gaining popularity in recent years, indicating its potential and possible limitations. To compete with conventional petroleum-based plastics, an enhancement of their low resistance to water and limited mechanical properties is essential. This review aims to discuss the various types of nanofillers and additives that have been used in plasticized starch films including nanoclays (montmorillonite, halloysite, kaolinite, etc.), poly-saccharide nanofillers (cellulose, starch, chitin, and chitosan nanomaterials), metal oxides (titanium dioxide, zinc oxide, zirconium oxide, etc.), and essential oils (carvacrol, eugenol, cinnamic acid). These reinforcements are frequently used to enhance several physical characteristics including mechanical properties, thermal stability, moisture resistance, oxygen barrier capabilities, and biodegradation rate, providing antimicrobial and antioxidant properties. This paper will provide an overview of the development of starch-based nanocomposite films and coatings applied in food packaging systems through the application of reinforcements and additives., This research was funded by the Agencia Estatal de Investigación (AEI, MICINN, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU), PID2021-123753NB-C31 and NextGenerationEU MRR TED2021-129335B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fabrication of PLA-Based Electrospun Nanofibers Reinforced with ZnO Nanoparticles and In Vitro Degradation Study

  • Salaris, Valentina
  • García-Obregón, Iñaki San Félix
  • López, Daniel
  • Peponi, Laura
In this work, electrospun nanofibers based on polylactic acid, PLA, reinforced with ZnO nanoparticles have been studied, considering the growing importance of electrospun mats based on biopolymers for their applications in different fields. Specifically, electrospun nanofibers based on PLA have been prepared by adding ZnO nanoparticles at different concentrations, such as 0.5, 1, 3, 5, 10 and 20 wt%, with respect to the polymer matrix. The materials have been characterized in terms of their morphological, mechanical, and thermal properties, finding 3 wt% as the best concentration to produce PLA nanofibers reinforced with ZnO nanoparticles. In addition, hydrolytic degradation in phosphate buffer solution (PBS) was carried out to study the effect of ZnO nanoparticles on the degradation behavior of PLA-based electrospun nanofiber mats, obtaining an acceleration in the degradation of the PLA electrospun mat., This research was funded by the Agencia Estatal de Investigación (AEI, MICINN, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU), PID2021-123753NB-C31 and NextGeneration EU MRR TED2021-129335B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Study on the Tensile Behavior of Woven Non-Woven PLA/OLA/MgO Electrospun Fibers

  • Leonés, Adrián
  • Peponi, Laura
  • García-Martínez, Jesús María
  • Collar, Emilia P.
The present work deeply studied the mechanical behavior of woven non-woven PLA/OLA/MgO electrospun fibers, efibers, by using Box–Wilson surface response methodology. This work follows up a previous one where both the diameters and the thermal response of such efibers were discussed in terms of both the different amounts of magnesium oxide nanoparticles, MgO, as well as of the oligomer (lactic acid), OLA, used as plasticizer. The results of both works, in term of diameters, degree of crystallinity, and mechanical response, can be strongly correlated to each other, as reported here. In particular, the strain mechanism of PLA/OLA/MgO efibers was studied, showing an orientation of efibers parallel to the applied stress and identifying the mechanically weakest points that yielded the start of the breakage of efibers. Moreover, we identified 1.5 wt% as the critical amount of MgO, above which the plasticizing effect of OLA was weaker as the amount of both components increased. Moreover, the minimum elastic modulus value took place at 15 wt% of OLA, in agreement with the previously reported convergence point in the evolution of the degree of crystallinity. Regarding the yield point, a concentration of OLA between 20 and 30 wt% led to a slight improvement in the yielding capability in terms of tensile strength in comparison with neat PLA efibers. Therefore, the approach presented here permits the design of tailor-made electrospun nanocomposites with specific mechanical requirements., This research was funded by the Agencia Estatal de Investigación (AEI, MICINN, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU), PID2021-123753NB-C31 and TED2021-129335B-C21., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An Analysis of the Self-Healing and Mechanical Properties as well as Shape Memory of 3D-Printed Surlyn® Nanocomposites Reinforced with Multiwall Carbon Nanotubes

  • Calderón-Villajos, Rocío
  • Sánchez, María
  • Leonés, Adrián
  • Peponi, Laura
  • Manzano-Santamaría, J.
  • López, A. J.
  • Ureña, A.
This research work studies the self-healing ability, mechanical properties, and shape memory of the polymer Surlyn® 8940 with and without multiwall carbon nanotubes (MWCNTs) as a nanoreinforcement. This polymer comes from a partially neutralized poly(ethylene-co-methacrylic acid) (EMAA) ionomer copolymer. MWCNTs and the polymer went through a mixing process aimed at achieving an excellent dispersion. Later, an optimized extrusion method was used to produce a uniform reinforced filament, which was the input for the 3D-printing process that was used to create the final test samples. Various concentrations of MWCNTs (0.0, 0.1, 0.5, and 1.0 wt.%) were used to evaluate and compare the mechanical properties, self-healing ability, and shape memory of unreinforced and nanoreinforced materials. Results show an enhancement of the mechanical properties and self-healing ability through the addition of MWCNTs to the matrix of polymer, and the specimens showed shape memory events., This research was funded by the Agencia Estatal de Investigación of Spanish Government Project MULTISENS PID2022-136636OB-I00 and Project CIRMAT PID2021-123753NB-C31., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermally-Activated Shape Memory Behavior of Biodegradable Blends Based on Plasticized PLA and Thermoplastic Starch

  • Sessini, Valentina
  • Salaris, Valentina
  • Oliver-Cuenca, Víctor
  • Tercjak, Agnieszka
  • Fiori, Stefano
  • López, Daniel
  • Kenny, José María
  • Peponi, Laura
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/)., Biodegradable blends based on plasticized poly(lactic acid) PLA and thermoplastic starch (TPS) have been obtained. The influence of the PLA plasticizer as a compatibility agent has been studied by using two different plasticizers such as neat oligomeric lactic acid (OLA) and functionalized with maleic acid (mOLA). In particular, the morphological, thermal, and mechanical properties have been studied as well as the shape memory ability of the melt-processed materials. Therefore, the influence of the interaction between different plasticizers and the PLA matrix as well as the compatibility between the two polymeric phases on the thermally-activated shape memory properties have been studied. It is very interesting to use the same additive able to act as both plasticizer and compatibilizer, decreasing the glass transition temperature of PLA to a temperature close to the physiological one, obtaining a material suitable for potential biomedical applications. In particular, we obtain that OLA-plasticized blend (oPLA/TPS) show very good thermally-activated capability at 45 °C and 50% deformation, while the blend obtained by using maleic OLA (moPLA/TPS) did not show shape memory behavior at 45 °C and 50% deformation. This fact is due to their morphological changes and the loss of two well-distinguished phases, one acting as fixed phase and the other one acting as switching phase to typically obtain shape memory response. Therefore, the thermally-activated shape memory results show that it is very important to make a balance between plasticizer and compatibilizer, considering the need of two well-established phases to obtain shape memory response., This publication is part of I+D+i proyect PID2021-123753NB-C31 funded by MCIN/AEI/10.13039/501100011033/ by “ERDF A way of making Europe” as well as TED2021-129335B-C21/AEI/10.13039/501100011033/ Unión Europea Next Generation EU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Comparison of Three-Layer and Single-Layer Small Vascular Grafts Manufactured via the Roto-Evaporation Method

  • Zumbardo-Bacelis, G. A.
  • Peponi, Laura
  • Vargas-Coronado, R. F.
  • Rodríguez-Velázquez, E.
  • Alatorre-Meda, M.
  • Chevallier, P.
  • Copes, F.
  • Mantovani, D.
  • Abraham, G. A.
  • Cauich-Rodríguez, J. V.
This study used the roto-evaporation technique to engineer a 6 mm three-layer polyurethane vascular graft (TVG) that mimics the architecture of human coronary artery native vessels. Two segmented polyurethanes were synthesized using lysine (SPUUK) and ascorbic acid (SPUAA), and the resulting materials were used to create the intima and adventitia layers, respectively. In contrast, the media layer of the TVG was composed of a commercially available polyurethane, Pearlbond 703 EXP. For comparison purposes, single-layer vascular grafts (SVGs) from individual polyurethanes and a polyurethane blend (MVG) were made and tested similarly and evaluated according to the ISO 7198 standard. The TVG exhibited the highest circumferential tensile strength and longitudinal forces compared to single-layer vascular grafts of lower thicknesses made from the same polyurethanes. The TVG also showed higher suture and burst strength values than native vessels. The TVG withstood up to 2087 ± 139 mmHg and exhibited a compliance of 0.15 ± 0.1%/100 mmHg, while SPUUK SVGs showed a compliance of 5.21 ± 1.29%/100 mmHg, akin to coronary arteries but superior to the saphenous vein. An indirect cytocompatibility test using the MDA-MB-231 cell line showed 90 to 100% viability for all polyurethanes, surpassing the minimum 70% threshold needed for biomaterials deemed cytocompatibility. Despite the non-cytotoxic nature of the polyurethane extracts when grown directly on the surface, they displayed poor fibroblast adhesion, except for SPUUK. All vascular grafts showed hemolysis values under the permissible limit of 5% and longer coagulation times., This work was supported by the Consejo Nacional de Ciencia y Tecnología (CONA- CYT) Mexico (Projects 1360 and 248378). We also acknowledge the funding provided by MCIN/AEI/10.13039/501100011033 with project PID2021-123753NB-C31.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bioactivity and Antibacterial Analysis of Plasticized PLA Electrospun Fibers Reinforced with MgO and Mg(OH)2 Nanoparticles

  • Leonés, Adrián
  • Salaris, Valentina
  • Peponi, Laura
  • Lieblich, Marcela
  • Muñoz-Bonilla, Alexandra
  • Fernández-García, Marta
  • López García, Daniel
In this work, we focused on the bioactivity and antibacterial behavior of PLA-based electrospun fibers, efibers, reinforced with both MgO and Mg(OH)2 nanoparticles, NPs. The evolution of PLA-based efibers was followed in terms of morphology, FTIR, XRD, and visual appearance. The bioactivity was discussed in terms of hydroxyapatite growth after 28 days, considered as T28, of immersion in simulated body fluid, SBF. In particular, the biomineralization process evidenced after immersion in SBF started at T14 in both systems. The number of precipitated crystals increased by increasing the amount of both NPs. The chemical composition of the precipitated crystals was also characterized in terms of the Ca/P molar ratio after T28 of immersion in SBF, indicating the presence of hydroxyapatite on the surface of both reinforced efibers. Moreover, a reduction in the average diameter of the PLA-based efibers was observed, reaching a maximum reduction of 46 and 60% in Citation: Leonés, A.; Salaris, V.; Peponi, L.; Lieblich, M.; Muñoz-Bonilla, A.; Fernández-García, M.; López, D. Bioactivity and Antibacterial Analysis of Plasticized PLAElectrospun Fibers Reinforced with MgOandMg(OH)2 Nanoparticles. Polymers 2024, 16, 1727. https://doi.org/10.3390/ polym16121727 Academic Editor: Alexey L. Iordanskii Received: 19 April 2024 Revised: 7 June 2024 Accepted: 12 June 2024 Published: 18 June 2024 Copyright: © 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https:// creativecommons.org/licenses/by/ 4.0/). the average diameter of neat PLA and PLA:OLA efibers, respectively, after 28 days of immersion in SBF. The antibacterial behavior of the MgO and Mg(OH)2 NPs in the PLA-based electrospun f ibers was tested against Escherichia coli, E. coli, as the Gram-negative bacteria, and Staphylococcus aureus, S. aureus, as the Gram-positive bacteria, obtaining the best antibacterial activity against the Gram-negative bacteria E. coli of 21 ± 2% and 34 ± 6% for the highest concentration of MgO and Mg(OH)2 NPs, respectively., This publication is part of the I+D+iproject PID2021-123753NB-C31, fundedby MCIN/AEI/ 10.13039/501100011033/, “ERDF—A Way of Making Europe”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Avocado Seed Starch-Based Films Reinforced with Starch Nanocrystals

  • Muñoz-Gimena, Pedro Francisco
  • Aragón-Gutiérrez, Alejandro
  • Blázquez-Blázquez, Enrique
  • Arrieta, Marina Patricia
  • Rodríguez, Gema
  • Peponi, Laura
  • López García, Daniel
Biopolymers derived from biomass can provide the advantages of both biodegradability and functional qualities from a circular economy point of view, where waste is transformed into raw material. In particular, avocado seeds can be considered an interesting residue for biobased packaging applications due to their high starch content. In this work, avocado seed starch (ASS)- based films containing different glycerol concentrations were prepared by solvent casting. Films were also reinforced with starch nanocrystals (SNCs) obtained through the acid hydrolysis of ASS. The characterization of the extracted starch and starch nanocrystals by scanning electron microscopy, X-ray diffraction, and thermogravimetric analysis has been reported. Adding 1% of SNCs increased elastic modulus by 112% and decreased water vapor permeability by 30% with respect to neat matrix. Interestingly, the bioactive compounds from the avocado seed provided the films with high antioxidant capacity. Moreover, considering the long time required for traditional plastic packaging to degrade, all of the ASS-based films disintegrated within 48 h under lab-scale composting conditions. The results of this work support the valorization of food waste byproducts and the development of reinforced biodegradable materials for potential use as active food packaging., This research was funded by the Agencia Estatal de Investigación (AEI, MICINN, Spain), Fondo Europeo de Desarrollo Regional (FEDER, EU), NextGenerationEU MRR TED2021-129335B-C21, and MCIN/AEI/10.13039/501100011033/ by “ERDF A way of making Europe” for the PID2021-123753NB-C31 and PID2021-123753NB-C32 projects., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bio-Based and Biodegradable Polymeric Materials for a Circular Economy

  • Oliver-Cuenca, Víctor
  • Salaris, Valentina
  • Muñoz Gimena, Pedro Francisco
  • Agüero, Ángel
  • Peltzer, M.
  • Montero, Victoria Alcázar
  • Arrieta, Marina P.
  • Sempere-Torregrosa, Jaume
  • Pavon, Cristina
  • Samper, M. D.
  • Rodríguez Crespo, Gema
  • Kenny, José María
  • López, Daniel
  • Peponi, Laura
Nowadays, plastic contamination worldwide is a concerning reality that can be addressed with appropriate society education as well as looking for innovative polymeric alternatives based on the reuse of waste and recycling with a circular economy point of view, thus taking into consideration that a future world without plastic is quite impossible to conceive. In this regard, in this review, we focus on sustainable polymeric materials, biodegradable and bio-based polymers, additives, and micro/nanoparticles to be used to obtain new environmentally friendly polymeric-based materials. Although biodegradable polymers possess poorer overall properties than traditional ones, they have gained a huge interest in many industrial sectors due to their inherent biodegradability in natural environments. Therefore, several strategies have been proposed to improve their properties and extend their industrial applications. Blending strategies, as well as the development of composites and nanocomposites, have shown promising perspectives for improving their performances, emphasizing biopolymeric blend formulations and bio-based micro and nanoparticles to produce fully sustainable polymeric-based materials. The Review also summarizes recent developments in polymeric blends, composites, and nanocomposite plasticization, with a particular focus on naturally derived plasticizers and their chemical modifications to increase their compatibility with the polymeric matrices. The current state of the art of the most important bio-based and biodegradable polymers is also reviewed, mainly focusing on their synthesis and processing methods scalable to the industrial sector, such as melt and solution blending approaches like melt-extrusion, injection molding, film forming as well as solution electrospinning, among others, without neglecting their degradation processes., This research was funded by the Agencia Estatal de Investigación (AEI, MICINN, Spain), and Fondo Europeo de Desarrollo Regional (FEDER, EU), PID2021-123753NB-C31, PID2021-123753NA-C32, PID2021-123753NA-C33, and NextGenerationEU MRR TED2021-129335B-C21. V.O.-C. acknowledges Spanish government for the grant PRE2020-103097 funded by MCIN/AEI/10.13039/501100011033 and “ESF Investing in your future”. The authors want to know MICIN for PID2021-123753NB-C31 and TED2021-129335B-C21 projects and for RED2022-134806-T., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Plasticized Starch/Gelatin Blends with Humidity-Activated Shape-Memory Behavior

  • Oliver Cuenca, Víctor
  • Muñoz Menzinger, Ana
  • Arrieta, Marina P.
  • López, Daniel
  • Peponi, Laura
Biodegradable and bio-based polymers, such as starch and gelatin, are emerging as an important alternative to the use of conventional polymers. In this work, different proportions (1/1, 1/1.5, 1/2, and 1/2.5) of these bio-based polymers will be investigated, with the primary objective of considering their strong moisture dependence as an advantage instead of a problem, as commonly considered. For this interesting challenge, the humidity-activated shape memory effect has been studied in both neat and plasticized starch. Additionally, for the first time, to the best of our knowledge, the shape-memory behavior activated by humidity in gelatin, as well as in starch/gelatin blends, is reported. In all cases, starch, gelatin, and their plasticized blends show excellent values in terms of strain fixity ratio, obtaining values of about 100% in all cases, and strain recovery ratio, with values higher than 90% for the samples studied. Moreover, considering their potential application as food packaging, mechanical response, wettability, water permeability, water uptake rate, and roughness is also studied in this work, taking into account the effect of the different amounts of gelatin on the final behavior of the materials., This research was funded by the Agencia Estatal de Investigación (AEI, MICINN, Spain) and Fondo Europeo de Desarrollo Regional (FEDER, EU), PID2021-123753NB-C31, PID2021-123753NA-C32, TED2021-129335B-C21 projects, PRE2020-103097 and JAEINT_24_02566., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Valorization of Avocado Seeds for Active Packaging: Comparative Analysis of Extracted Starch- and Seed Flour-Based Materials with Cinnamon Essential Oil

  • Muñoz-Gimena, Pedro Francisco
  • Aragón-Gutiérrez, Alejandro
  • Blázquez-Blázquez, Enrique
  • Arrieta, Marina P.
  • Peponi, Laura
  • López García, Daniel
This work aims to develop bio-based and biodegradable materials for active food packaging purposes by comparing the properties of avocado seed flour (ASF) and avocado extracted starch (AES). A 36.4% dry basis yield is obtained for the extracted AES from ASF. ASF presents a higher crystallinity, and SEM images show a mixture of starch granules and other materials, whereas AES presents lower ash, protein, and lipid content relative to ASF. To make a comparison between the two, ASF or AES are mixed with glycerol at different concentrations, then twin-screw extruded and injection-molded to develop thermoplastic starch-based materials. The morphological, mechanical, barrier, antioxidant, antimicrobial, and disintegrability properties are evaluated to compare their different compositions. ASF-based films exhibit better barrier properties and a 134% higher intrinsic antioxidant capacity. Conversely, the homogenous nature of AES-based materials results in better interactions with the plasticizer, allowing a wide range of mechanical properties. Moreover, cinnamon essential oil (CEO) was incorporated into the preferred compositions of both ASF and AES to improve antimicrobial properties. Adding a 5% concentration of CEO to samples was sufficient to completely inhibit the growth of P. expansum. These results support waste valorization for developing active packaging materials with high antioxidant and antimicrobial properties without competing for resources with the food industry., This research was funded by the Agencia Estatal de Investigación (AEI, MICINN, Spain), Fondo Europeo de Desarrollo Regional (FEDER, EU), NextGenerationEU MRR TED2021-129335B-C21, and MCIN/AEI/10.13039/501100011033/ by “ERDF A way of making Europe” for the PID2021-123753NB-C31 and PID2021-123753NB-C32 projects., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chemically Modified Starch Films with Menthol or Sulfobetaine as Antimicrobial Agents for Active Packaging Applications

  • Muñoz-Gimena, Pedro Francisco
  • Prado, Anselmo del
  • Aragón-Gutiérrez, Alejandro
  • Peponi, Laura
  • López García, Daniel
This study aims to develop a modified starch with menthol (M) or sulfobetaine (S) using 1,6-hexamethyl diisocyanate (HMDI) as a linker to create biodegradable antibacterial materials for active packaging applications. The modification of potato starch is performed in a two-step reaction. First, the starch modifiers are synthesized through an equimolar reaction between HMDI and menthol or the sulfobetaine precursor. Next, the synthesized HMDI derivative is dissolved in a bio-based solvent (methyl-THF) with starch and K2CO3 (1:1 weight ratio) to chemically modify the starch. The chemical and thermal properties of the modified starch are analyzed. Starch films containing 25 wt.% glycerol and low amounts (0.5, 1, and 3% wt.) of M- or S-modified starch were successfully produced by extrusion. Although most film properties remain similar to the control, adding 3% of S-modified starch resulted in a 149% increase in Elastic Modulus and a 29% decrease in water vapor permeability. Additionally, just 0.5 wt.% of either M- or S-modified starch effectively inhibits S. aureus growth, indicating its potential as a bioactive compound for active packaging., This research was funded by the Agencia Estatal de Investigación (AEI, MICINN, Spain), Fondo Europeo de Desarrollo Regional (FEDER, EU), NextGenerationEU MRR TED2021-129335B-C21, and MCIN/AEI/10.13039/501100011033/ by “ERDF A way of making Europe” for the PID2021-123753NB-C31 project., Peer reviewed